Trabajos factory en Wichita, KansasCrear alertas

Job Description Job Description: We are looking for a skilled Mechanic to maintain and repair vehicles. You will be responsible for ensuring functionality and reliability of machines, vehicles and mechanical systems. Mechanics are responsible for conducting diagnostic services per department standards and factory specifications; deviation from standards and specifications require management pre-approval. This position requires the ability to self-manage, self-motivate, communicate seamlessly and have a sense of urgency that team members and customers expect. Duties and Responsibilities include but are not limited to: Create a proper estimate informing your customer on discrepancies or abnormalities including the time to perform the service and parts required for the job Recommend additional repairs or maintenance needed to improve the value of the vehicle Perform assigned repairs and maintenance Test and recheck all repairs and road test all comebacks as assigned by the Managers Maintain and improve technical expertise through technical bulletins, trade publications and training seminars Advise your Manager of all equipment breakdowns and required maintenance immediately Respond to and follow proper procedures on employee and customer accidents, injuries, and loss or damage to any property. Report all incidents to the Manager A/C, Heater & Refrigeration - Flush system contaminants, evacuate system, add oil and charge with Freon Run OEM performance tests and verify performance, utilize electrical schematics, identify and correct related problems Ability to diagnose and repair brakes, electrical, clutch, cooling system, suspension issues, and preventative maintenance. Qualifications include: High School Diploma or equivalent required • Auto mechanic experience preferred, • Valid Kansas driver's license Strong verbal and written communication and interaction skills required Ability to sit, stand, climb stairs, squat, kneel and walk for prolonged periods of time, must be able to lift 5-50 pounds. Vision abilities required Good computer and software knowledge – able to operate diagnostic test equipment Qualified to operate a motor vehicle both automatic and standard transmission Must have basic tools for Auto Mechanic work This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, minor potential physical hazards, such as electrical current , moving mechanical parts, exposure to hot equipment and cleaning and pesticide chemicals; and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations Benefits: • Generous PTO after 6 months, • Eligible for Insurance after 60 days of employment (Medical/Vision/Rx, Dental), • Positive & Encouraging work environment

Job Description MECHANIC Perform maintenance and repair of various types of mobile equipment in Andale Ready Mix Central shops or on public roadways as necessary. Maximize equipment availability through the use of efficient and proactive preventative maintenance programs. REQUIRED SKILLS · Diagnose problems and perform mechanical repair and maintenance to various types of equipment including but not limited to: tires, ready mix concrete trucks, heavy construction equipment and passenger vehicles · Determine vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. · Demonstrate proficiency in the repair and diagnosis of - with some assistance: Engines (gas and diesel), Power train to include differentials, transmissions, clutches, drive shafts, PTO's and wheel ends, Electrical systems including starters and alternators, HVAC systems, Steering systems, Electronics to include ECM's, ECU's, sensors etc., Engine bolt on items such as turbos, fan clutches, injectors, cooling system etc., Brake systems including ABS, Suspension systems (spring and air) · Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion, completing winterization procedures. · Operate and inspect equipment to diagnose defects · Verifies vehicle performance by conducting test drives; adjusting controls and systems. · Rebuild or fabricate parts as needed · Create work orders on repairs and services providing legible and accurate information for work performed · Coordinate with location supervisor and review Daily Driver Reports (DDR’s), to prioritize work accordingly · Maintains vehicle records by annotating services and repairs into vehicle maintenance files. · Contain costs by using warranty, evaluating service and parts options. · Communicate with drivers and plant managers to ensure adherence to preventative vehicle maintenance policies and practices. · Use a wide variety of hand and power tools, cutting torches and welding equipment. · Order parts from approved vendors and drive Company pick-up/repair truck to pick up parts. · Operate fixed and mobile equipment as necessary. · Maintain work area appearance and safety. · May assist in the maintenance and repair of fixed equipment. · Examine and adjust protective guards, loose bolts, and specified safety devices. · Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications. · Able to work overtime hours on a routine basis. · Comply with all Safety, Health, Environmental and other Company policies, procedures and requirements · Perform other duties as directed by supervisor. Observe all safety standards and participate in Andale Ready Mix Central’s efforts to provide a safe work environment. Always wear prescribed personal protective equipment (eye protection, ear protection, gloves, hard hat, and hard toed shoes). Attend all safety meetings and read all materials provided. JOB QUALIFICATIONS · Qualified to perform preventive maintenance and repair/replace tires · Must have good mechanical and welding skills · Ability to operate crane, forklift, loaders, and various other types of mobile equipment preferred · Must have the ability to read technical manuals and understand schematic diagrams · Must have sufficient level of education to understand oral and written instructions of a technical nature relating to products and equipment · Must have the ability to effectively communicate in English, including reading and writing · Ability to work in non-climate-controlled conditions required PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to sit, talk or hear. The employee is frequently required to sit, climb, stand walk crawl, kneel and use hands to finger, handle or feel, work overhead. Employee must regularly lift and /or move up to 25lbs, frequently lift and/or move up to 50lbs and occasionally lift and/or move up to 100lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral and depth vision.

Job DescriptionDescription: GTG Peterbilt – Wichita, KS is a premier provider of quality products and services to commercial equipment users. We carry a large selection of new and previously owned commercial trucks and offer a full suite of maintenance and repair services. When you build your career at GTG Peterbilt, you make a commitment to being the very best in the business. GTG Peterbilt supplies the trucking industry with the highest quality products, sold and serviced by dedicated, factory trained employees in order to provide the highest return for their customers. Their commitment to quality and dedication to excellence is the driving force behind their success. We have an immediate opening for a 2nd shift Experienced Diesel Technician in our Wichita, KS location. The successful candidate will perform service and repair on heavy duty trucks covering all makes and models. Requirements: • Determine unit condition by conducting inspections & diagnostic test, identifying deficiencies., • Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications; make necessary adjustments if required., • Perform other routine maintenance work on equipment and vehicles., • Maintain cost efficiency by using warranty, evaluating service & parts options., • Maintain vehicle records with an accurate documentation of service and repairs., • Complete engine overhauls as well as other repairs identified during the diagnostic process., • Read schematics for electrical and air systems., • Use good judgment to maintain a safe & organized work environment., • Accept ownership for accomplishing new & different requests & exploring value added opportunities., • Apply knowledge and work in accordance with DOT, Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and other rules and regulations as required., • Other general shop duties as assigned. Skills: • Solid working knowledge of power tools required to perform all phases of truck/chassis repair and maintenance, • Strong mechanical aptitude., • At higher levels of experience demonstrate ability to perform all phases of heavy-duty diesel equipment and services., • Professional and safety minded at all times., • Excellent communication both verbal and written, listening skills., • Good customer service skills., • Ability to prioritize and multi-task in fast-paced environment., • Work with minimal supervision and direction., • Work well independently as well as part of a team. Education: • Minimum of High School diploma or equivalent (GED), preferred., • Certifications from OEM's in the trucking industry a plus., • 2 years of tech school and 5 years of experience in heavy duty truck repair., • Combination of education, training, and experience that provides the required knowledge, skills, and abilities. Requirements: • Valid driver’s license and be insurable. CDL preferred., • Must be able to pass mandatory pre-employment drug screen and background check Additional Information: Physical: Working in, under, and around trucks and trailers. Ability to lift, push or pull, objects of various shapes, sizes and weights. Safely walk, reach, bend, climb, push, twist, squat and kneel as necessary to perform the essential job duties. Safely walk and stand for extended periods of time. Uniforms, ear and eye protection provided. Benefits: • Competitive salary and benefits package,, • $250 allowance for safety footwear provided after initial 90 training and evaluation period, renewed annually., • Medical, Dental & Vision insurance., • PTO accrual begins at time of hire., • Eligibility for paid holidays at time of hire., • 401(k), • 401 (k) match Compensation based on education and experience. GTG Peterbilt is an equal opportunity employer.

Job Description Responsibilities A Diesel Service Technician is responsible for providing service & repair to our customers' fleet via assigned truck and equipment repairs, while maintaining exceptional customer service. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Cleaning, maintenance, visual inspection, and removal of parts and attachments., • Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction. Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier., • Current and valid CDL and Medical card as required by the FMVS preferred but not required., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, &/or ASE certifications are preferred & rewarded Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionDescription: GTG Peterbilt – Wichita, KS is a premier provider of quality products and services to commercial equipment users. We carry a large selection of new and previously owned commercial trucks and offer a full suite of maintenance and repair services. When you build your career at GTG Peterbilt, you make a commitment to being the very best in the business. GTG Peterbilt supplies the trucking industry with the highest quality products, sold and serviced by dedicated, factory-trained employees in order to provide the highest return for their customers. Their commitment to quality and dedication to excellence is the driving force behind their success. We have an immediate opening for a Shipping & Receiving Person for our store in Wichita, KS. The successful candidate will focus on; unload and load inbound outbound freight, picking parts for customer/transfer truck, putting parts away efficiently and accurately, cleaning up and improving warehouse, assisting with local delivery, and picking up parts. Requirements: • Unloading and loading freight using a sit-down forklift., • Keep warehouse clean and organized., • Pull parts for customers and transfer truck., • Putting parts away accurately and efficiently., • Check in and shipping out parts., • Report any problems or discrepancies to management., • Work effectively as a member of a small team., • Class "C" or above a plus., • Assist picking up and or delivery parts to customers or vendors. Job Requirements: • High School Diploma or GED preferred., • Combination of education, training, or experience that provides the required knowledge, skills, and abilities., • Pass a drug and background screening., • Ability to lift 50 lbs. from the ground unassisted., • Clean driving record., • 1 Year or more Warehouse experience., • Forklift experience or certification. Benefits: • Competitive salary and benefits package., • Medical, Dental & Vision insurance, • Eligibility for paid holidays at time of hire., • PTO accrual begins on the first day of employment., • 401(k), • 401 (k) match Compensation based on education and experience. GTG Peterbilt is an equal opportunity employer.

Job Description SUMMARY This position will work on either an assembly line or at individual job stations to perform a wide variety of sub-assembly and final assembly operations to produce air conditioners for recreational vehicles. ESSENTIAL DUTIES AND RESPONSIBILITIES Includes the following: Obtains job instructions from supervisor, or lead. Gets workstation and equipment ready for production, obtaining materials as needed. Reports material shortages. Performs assembly operations such as drilling, riveting, bolting, and wiring, by hand and with jigs, air guns, machines, and fixtures. Disassembles units as required to perform rework operations. Makes minor changes and adjustments on machinery and equipment such as changing tools and adjusting rivet sets. Maintains accurate records for attendance and production purposes. Packages and identifies parts and products as assigned. Performs operations to quality standards as specified by blueprints and verbal instructions. Keeps work area in order and observes all safety rules as specified in employee handbooks, memos, and MSDS literature. Performs other related duties as assigned. QUALIFICATIONS Good mechanical skills. EDUCATION and/or EXPERIENCE None. Previous manufacturing experience preferred. COMPUTER SKILLS None. LANGUAGE SKILLS Ability to read and comprehend written instructions, safety material, and manuals used on the job. MATHEMATICAL SKILLS Ability to complete basic mathematics functions. Needs to be able to count accurately. REASONING ABILITIES Ability to identify and describe problems. Ability to interpret and apply safety instructions provided orally or in writing to the job assigned. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions. The employee is required to stand for 8 hours a day while performing the assembly functions, lift up to 25 pounds frequently, work overhead frequently, stoop, squat and bend repeatedly, have the motor skills to operate power tools for fastener installation, pick up small fasteners, and manipulate the parts into an assembled air conditioner. These tasks are done on a repetitive basis and may involve 300 – 400 units per day. Vision requirements include: close vision, depth perception and ability to adjust focus. WORK ENVIRONMENT The work environment described is representative of those an employee would encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable an individual with disabilities to perform the essential functions. Employee will be exposed to pieces of sheet metal, which may have sharp edges, moving mechanical parts, plastics, steel, copper, refrigerant, insulation and various adhesives and power tools on a daily basis. The noise level in the factory is moderate to loud. EQUAL EMPLOYMENT OPPORTUNITY RV Products a Division of Airxcel, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. U.S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor currently.

Job Description Make Your Mark™ with Tandy Leather! Do you want to be part of a team that allows you to be you, share your passion and creativity as part of a talented and diverse retail team? Our retail stores are the center of our business, and our associates are the front line with our customers. As part of the Tandy team, our store associates look forward to a consistent schedule with no early mornings or late nights, paid holidays and PTO, a generous employee discount, quarterly sales associate bonus, and even more! Plus, they get the chance to learn and develop their leatherworking knowledge and skills as part of a small team running a small business. You will be joining a heritage brand with more than 100 years of expertise in the field of leathercraft. Sound like a team you'd like to be a part of? Since 1919 Tandy Leather has been the resource for generations of leatherworkers, providing quality leather, tools, kits, and teaching resources worldwide. As a century-old brand, Tandy has a deep respect for tradition, but we also embrace change, new trends, and new ways to create. From store to distribution center to corporate, Team Tandy works collaboratively every day to ensure our customer's experience is always consistent no matter how they choose to shop at Tandy. Responsibilities: • Welcome and identify customer needs, • Explain products and services to customers, • Monitor inventory to ensure the product is in stock, • Enter and process customer orders, • Investigate and resolve customer complaints, • Other duties as assigned Qualifications: • Previous experience in sales, customer service, or other related fields, • Ability to thrive in a fast-paced environment, • Ability to build rapport with customers, • Excellent written and verbal communication skills, • Strong negotiation skills Physical Demands • Constant moving & standing for at least two consecutive hours, • Lifting up to 30lbs., • Stooping, kneeling, and crouching, • Climbing ladders, • Reaching for items above eye level, • Involves close vision and color vision, depth perception, and focus adjustment TLF offers a compensation package: • Competitive compensation – strong pay for performance culture., • Sales Associate Quarterly Bonus – based on sales performance, a great way to grow your pay!, • Paid Holidays – ten paid holidays available on day one of employment., • Paid Time Off – granted after 30 days of employment., • 401(k) Plan - company matched, • And much, much more! We consider all qualified applicants for employment, including those with Criminal Histories. To learn more about Tandy Leather, please visit our website: www.tandyleather.com. EQUAL EMPLOYMENT OPPORTUNITY At Tandy, our diversity is our strength, and we are committed to creating a safe and inclusive workplace for all employees regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Tandy is proud to be an equal-opportunity employer. ABOUT TANDY Tandy Leather Factory, Inc., (http://www.tandyleather.com), headquartered in Fort Worth, Texas, and in business since 1919, is a specialty retailer of a broad product line including leather, leatherworking tools, buckles and adornments, leather dyes and finishes, saddle and tack hardware, and do-it-yourself kits. Tandy Leather distributes its products through its 100+ North American stores located in 40 US states, 6 Canadian provinces, and Spain.

Job DescriptionDescription: GTG Peterbilt – Wichita, KS is a premier provider of quality products and services to commercial equipment users. We carry a large selection of new and previously owned commercial trucks and offer a full suite of maintenance and repair services. When you build your career at GTG Peterbilt, you make a commitment to being the very best in the business. GTG Peterbilt supplies the trucking industry with the highest quality products, sold and serviced by dedicated, factory trained employees in order to provide the highest return for their customers. Their commitment to quality and dedication to excellence is the driving force behind their success. We have an immediate opening for a Commercial Truck Detail Specialist. The successful candidate will assist in the preparation of new and used trucks. Requirements: • Use of power washer: power wash trucks and items as needed., • Thoroughly clean interior and exterior of new, used, and customer vehicles., • Maintain the wash bay stall and area., • General housekeeping of the exterior of dealership., • Maintains a high quality of work., • Performs other duties as assigned by supervisor., • Work with all departments to help achieve our company goals. Qualifications: • Experience in heavy duty truck industry a plus., • Good communication in verbal, written, and listening skills., • Good customer service skills., • Ability to prioritize and multi-task., • Able to work with minimal supervision and direction., • Work well independently as well as part of a team., • Must have valid driver’s license and be insurable. CDL preferred., • Must be able to pass mandatory pre-employment drug screen and background check. Education: • Preferred minimum of High School diploma or equivalent (GED)., • Combination of education, training, or experience that provides the required knowledge, skills, and abilities. Additional Information • Physical: Working in, under, and around trucks and trailers. Ability to lift, push or pull, objects of various shapes, sizes and weights. Safely walk, reach, bend, climb, push, twist, squat and kneel as necessary to perform the essential job duties. Safely walk and stand for extended periods of time., • Environmental: Primarily indoors with some outdoor work. Uniforms, ear, and eye protection provided. Benefits: • Competitive salary and benefits package., • Medical, Dental & Vision insurance, • Eligibility for paid holidays at time of hire., • PTO accrual begins on first day of employment., • 401(k), • 401 (k) match Compensation based on education and experience. GTG Peterbilt is an equal opportunity employer. Salary: $12.00 - $18.00 per hour

Coleman Worldwide Moving has immediate openings for non-CDL driving positions in your area. This position involves loading, transporting, and unloading household goods. Driving for Coleman will give you the opportunity to be a leader for our moving crews, interact with new customers on a daily basis, and grow within our company. The ideal candidate will have a clean driving record and be able to comply with our zero-tolerance drug policy. If you are looking for a challenging position that allows you to be the solution when a problem arises, this is the job for you! Here are some great reasons why you should want to work for us: • Refreshing daily/weekly change of pace with a diverse work environment and friendly customers., • Great paying entry level job that allows for growth and promotions for those that show initiative., • Ability to earn incentives above and beyond hourly pay rate for great work provided., • Team oriented and independent work environment! Not locked down in a factory, boring assembly line work, or cash register!, • An array of various types of benefits that are listed down below including, but not limited to a Summer Intern Scholarship. Essential Functions and Duties: • Transport goods using a company truck, • Lead the crew in loading shipment on to and/or off of truck, • May inspect shipment prior to loading for proper packing or wrapping, • Perform accurate inventory of shipment, • Assist as need in loading trucks and/or containers for forward movement via interstate commerce, • Perform pre-trip and post-trip safety inspections on truck of moving equipment, interior and exterior of truck, straps and tensioners, walkboards, etc., • Maintain required documentation and paperwork for shipments, expenses, driver logs, and DOT regulations, • Lift and carry household goods between residence and vehicle, • Other duties as assigned Knowledge, Skills and Abilities: • Must be willing to travel (local, intrastate and/or interstate), • Ability to operate a box truck, • Excellent communications skills, • Ability to be on time and reliable; ability to meet deadlines, • Knowledge of DOT regulations Required Education and Experience: • Required: High school diploma or GED, • Preferred: Real ID Complaint ID or DL Working Conditions: • Indoors and outdoors, • Lifting of objects up to 50 pounds, • Frequent squatting and bending, • Frequent use of stairs, • Driving for long periods of time Coleman Worldwide Moving Benefits for Employees (not applicable for seasonal employees if not stated): • 40 hours of VACATION PAY after 1-year employment, • Array of voluntary health benefits including but not limited to (Health, Dental, Vision, 401k, and more), • 8 paid holidays after 90 days for Full Time employees (Seasonal Included), • Referral Bonus Programs College Students--We also offer a summer Intern SCHOLARSHIP Program! • Coleman Worldwide Moving proudly supports post-secondary education in our communities and will offer the following scholarship program to qualifying summer interns to assist them with tuition in the coming year. Funding amounts are paid out directly to the Associate to assist with their various student expenses., • $500 scholarship* towards your post-secondary education for the first** full summer internship., • $750 scholarship* towards your post-secondary education for the second** full summer internship, • $1,000 scholarship* towards your post-secondary education for the third** or more full summer internship, • Must be summer seasonal Associate employed as Helper, Packer, Driver, Warehouseman, or other Service Center Operational, non-management position., • Must show proof of enrollment in school for current year's fall classes., • Must work full time through scheduled season (accommodations made for school dates)., • Supervisor acknowledgement of good work performance and attendance also required. Coleman Worldwide Moving (and affiliated companies) (collectively "CWM") is an equal opportunity and affirmative action employer. Policy prohibits discrimination or harassment on the basis of race, color, religion, national origin, ancestry, sex, age, marital status, familial status, pregnancy, genetic information, sexual orientation, disability, veteran status or other protected status. CWM will continue to support and promote equal employment opportunity, human dignity, and cultural diversity. This policy applies to all personnel matters such as compensation, benefits, transfers, Company sponsored training, education, and social and recreational programs. This commitment is made by CWM in accordance with federal, state, and/or local laws and regulations Only applications submitted within three months of the review period will be considered for employment. Please submit another application for further review after the review period elapses.

Coleman Worldwide Moving has immediate openings for CDL driving positions in your area. This position involves loading, transporting, and unloading household goods. Driving for Coleman will give you the opportunity to be a leader for our moving crews, interact with new customers on a daily basis, and grow within our company. Compensation range is $19-$24 per hour depending on experience. The ideal candidate will have a clean driving record and be able to comply with our zero-tolerance drug policy. If you are looking for a challenging position that allows you to be the solution when a problem arises, this is the job for you! Here are some great reasons why you should want to work for us: • Refreshing daily/weekly change of pace with a diverse work environment and friendly customers., • Great paying entry level job that allows for growth and promotions for those that show initiative., • Ability to earn incentives above and beyond hourly pay rate for great work provided., • Team oriented and independent work environment! Not locked down in a factory, boring assembly line work, or cash register!, • An array of various types of benefits that are listed down below including, but not limited to a Summer Intern Scholarship. Essential Functions and Duties: • Transport goods using a company truck, • Lead the crew in loading shipment on to and/or off of truck, • May inspect shipment prior to loading for proper packing or wrapping, • Perform accurate inventory of shipment, • Assist as need in loading trucks and/or containers for forward movement via interstate commerce, • Perform pre-trip and post-trip safety inspections on truck of moving equipment, interior and exterior of truck, straps and tensioners, walkboards, etc., • Maintain required documentation and paperwork for shipments, expenses, driver logs, and DOT regulations, • Lift and carry household goods between residence and vehicle, • Other duties as assigned Knowledge, Skills and Abilities: • Must be willing to travel (local, intrastate and/or interstate), • Ability to operate a box truck or tractor trailer (as applicable to your CDL qualification), • Excellent communications skills, • Ability to be on time and reliable; ability to meet deadlines, • Knowledge of DOT regulations Required Education and Experience: • Required: High school diploma or GED, • Preferred: Real ID Complaint ID or DL Working Conditions: • Indoors and outdoors, • Lifting of objects up to 50 pounds, • Frequent squatting and bending, • Frequent use of stairs, • Driving for long periods of time Coleman Worldwide Moving Benefits for Employees (not applicable for seasonal employees if not stated): • 40 hours of vacation pay after 1-year employment, • Array of voluntary health benefits including but not limited to (Health, Dental, Vision, 401k, and more), • 8 paid holidays after 90 days for Full Time employees (Seasonal Included), • Referral Bonus Programs College Students--We also offer a summer Intern SCHOLARSHIP Program! • Coleman Worldwide Moving proudly supports post-secondary education in our communities and will offer the following scholarship program to qualifying summer interns to assist them with tuition in the coming year. Funding amounts are paid out directly to the Associate to assist with their various student expenses., • $500 scholarship* towards your post-secondary education for the first** full summer internship., • $750 scholarship* towards your post-secondary education for the second** full summer internship, • $1,000 scholarship* towards your post-secondary education for the third** or more full summer internship, • Must be summer seasonal Associate employed as Helper, Packer, Driver, Warehouseman, or other Service Center Operational, non-management position., • Must show proof of enrollment in school for current year's fall classes., • Must work full time through scheduled season (accommodations made for school dates)., • Supervisor acknowledgement of good work performance and attendance also required. Coleman Worldwide Moving (and affiliated companies) (collectively "CWM") is an equal opportunity and affirmative action employer. Policy prohibits discrimination or harassment on the basis of race, color, religion, national origin, ancestry, sex, age, marital status, familial status, pregnancy, genetic information, sexual orientation, disability, veteran status or other protected status. CWM will continue to support and promote equal employment opportunity, human dignity, and cultural diversity. This policy applies to all personnel matters such as compensation, benefits, transfers, Company sponsored training, education, and social and recreational programs. This commitment is made by CWM in accordance with federal, state, and/or local laws and regulations Only applications submitted within three months of the review period will be considered for employment. Please submit another application for further review after the review period elapses.

Job DescriptionCompany Description Christian Brothers Automotive Benefits: • *Up to $45/HR For The Most Skilled Technicians, • Work/Life Balance Focused with NO WEEKENDS and 6 Paid Holidays, • Consistent High Hours Available to Ensure Proper Compensation, • $25,000 in Life Insurance Provided, • *Up to $45/HR For The Most Skilled Technicians, • High Achievers Thrive Here, with Bonus Opportunities Available Weekly. Bonus Opportunities Are Always Available, and We’re Happy To Dispatch As Much Work As You’re Ready To Take On. Your Strong Performance and Consistency is Recognized, • Flexible Pay Structure - Flag Rate or Hourly with OT & Flagged Hours Bonus, • You Are In Complete Control Of Your Pay, Up to $6/hr pay raise available weekly!, • Professional Development is Supported Through Paid/Reimbursed ASE Certification Testing, Passing Fees, and Certification Renewal Fees, • Rewarding Great Work - Review Process Provides Opportunities With Leadership to Share Your Goals and Discuss Action Plans To Achieve Financial and Work Life Balance Goals, • Locally Owned & Operated Shop with Owner Onsite, With An Open Door Policy, • We Are Going To Set You Up For Success During Your Transfer Between Companies; Toolbox Relocation Assistance, Tool Program, • 6 Paid Holidays, • Enjoy Paid Vacation That Grows With Your Tenure - Excellent PTO Package 10 Days Paid Vacation - 2 Weeks Per year: 5 days PTO after 6 months, additional 5 after 1 year., • Our Shop Invests in the OEM Diagnostic Scan Tools, The Latest Aftermarket Scan Tools & Many Specialty Tools That Are All Available For Your Use in Precise Troubleshooting, • Healthcare Benefits Available with Employer Contribution To Support Your Coverage, • Dental, Vision, Long Term, and Short Term Benefits Available., • 401K - Retirement - Match up to 4% of income, • Team Member Celebration Program - Recognizing Employees' Birthdays, Anniversaries, Military Service, and Certifications Throughout the Year, • Team Building Outings (i.e. Top Golf, Shooting Range, Paintball, Bowling), • On-Going Training & Career Advancement, • On-demand, Real-time Diagnostic Assistance From Christian Brothers ASE Master Certified Technicians to Support Accurate Diagnostics and Efficient Repairs, Located In Houston, Texas, • Uniform Shirts Are Provided so You Can Work Comfortably & Professionally, • We Are Proud To Have A Collaborative Technician Team Environment, • Employee Referral Program, • Wellness Program Offering Chaplain Care Support, • Employer-paid Financial Wellness Program and App, SmartDollar & EveryDollar, • Continuous Training Available Through The CBA Flywheel Learning System, • Employee Point Store Access - Redeem Your Training Points For Awesome Swag & Rewards, • Future Franchise Leadership Academy (FFLA) - Path to Shop Ownership Program Available, • We Believe in Rewarding Great Work - Our Annual Review Process Offers Opportunities for Goal Sharing and Pay Increases Based on PerformanceJob Description Job Title: Automotive Technician / Mechanic Location: 10080 W. 29th Street N, Wichita, United States, 67205 Job Overview: We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our guests. Responsibilities include, but are not limited to: • Technicians use their knowledge & skills to diagnose and fix vehicles for our guest, • Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles, • Complete full, accurate, and honest courtesy vehicle inspections, • Work as part of a team to troubleshoot guest concerns quickly and effectively, • Follow and promote our high standards of safety, cleanliness, and organization, • Work closely with the service department and effectively communicate concerns, • Work together with other technicians to solve problems, meet deadlines, and deliver distinguished resultsQualifications Qualifications: • Positive attitude and a desire to serve guest, • 3+ years of experience as an automotive technician/mechanic, • ASE Certifications preferred, or a plan to achieve, • Capable of diagnosing and repairing all makes/models of vehicles, • Meet or exceed hourly goals, • Aptitude for learning additional skills and processes, • Professional appearance and strong communication, • A desire for long-term career development Physical Requirements: • Occasionally lift and/or move over 100 pounds, • Be able to work with tools on vehicles lifted above their head, • Work in tight spaces as dictated by the vehicle’s needed repair, • Have the needed dexterity in order to efficiently use hand tools, • Walk/stand for the majority of their workday, • Drive manual transmissions vehicles, • Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Job DescriptionCompany Description Christian Brothers Automotive Benefits: • *Up To $17/hr For The Most Skilled Technicians, • Paid Vacation & Paid Holidays, • Closed Every Weekend To Spend Time With Family & Friends, • Employer-paid Financial Wellness Program and App, SmartDollar & EveryDollar, • Real-Time Automotive Technical Support, • Technician Training Paths To Assist With Career Development, • Toolbox Relocation Assistance, • Healthcare Benefits Available, • Locally Owned and Operated, • On-Going Training & Career Advancement, • ASE Certification Reimbursement, • Chaplain Care Support Available, • Employee Point Store Access - Redeem Your Training Points For Awesome Swag & Rewards, • Continuous Training Available Through The CBA Flywheel Learning System, • Future Franchise Leadership Academy (FFLA) - Path to Shop Ownership AvailableJob Description Job Title: Automotive General Service Technician / Mechanic Location: 1302 N. Woodlawn Blvd., Wichita, United States, 67208 Job Overview: We are looking for technicians who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guests. Responsibilities include, but are not limited to: • General Service Technicians / Mechanics perform all maintenance and repair services including but not limited to; oil changes, tire rotations, battery replacements, suspension alignments, and more, • Perform state-mandated vehicle emission and safety inspections in accordance with state regulations, • Work as part of a team to troubleshoot guest concerns quickly and effectively, • Complete full, accurate, and honest courtesy vehicle inspections, • Ensure all preventive maintenance reports are complete and accurate, • Comply with federal, state, and local regulations that affect service operations, such as hazardous waste disposal and OSHA right-to-know, • Assist in all housekeeping functions as directed by Management, • Work closely with the service department and effectively communicate the extent of any damage or malfunctions on a guest's vehicle, • Follow and promote our high standards of safety, cleanliness, and organizationQualifications Qualifications: • Current driver’s licenses, • This is an entry level position. We would prefer a high school or equivalent diploma, but this is not required. Physical Requirements: • Occasionally lift and/or move over 50 pounds, • Be able to work with tools on vehicles lifted above their head, • Work in tight spaces as dictated by the vehicle's needed repair, • Have the needed dexterity in order to efficiently use hand-tools, • Walk/stand for the majority of the workday, • Drive manual transmission vehicles, • Keeping a brisk work pace in a high-volume environment, • Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Job DescriptionJob Description: About Scholfield Honda At Scholfield Honda, we prioritize customer satisfaction and professional growth. We offer competitive pay, comprehensive training, and a supportive work environment where your skills and dedication are valued. Job Details Salary: From $70,000 to $140,000 a year Job Type: Full Time Location: Wichita, KS 67207 Position Summary We are seeking an experienced Automotive Service Technician to join our team. This role involves troubleshooting vehicle issues, maintaining high customer service standards, and ensuring quality repairs that meet factory and local recommendations. Key Responsibilities Diagnose and troubleshoot customer vehicle concerns using the latest technical tools and resources Maintain courteous and professional interactions with all customers Assist as a secondary greeter in the Service Drive area when possible Stay current with technical publications, Service Communication, and Asist terminal operations Ensure vehicle repairs are completed safely, correctly, and on the first visit Address all original customer concerns before recommending additional services Inspect vehicles for maintenance needs according to local and factory guidelines Return vehicles clean or cleaner than when received Participate in factory or in-house sponsored training programs Complete all required paperwork accurately and attach necessary shop forms Perform other duties as assigned by management Maintain punctuality, a clean uniform, and a professional appearance Compensation and Benefits We offer a signing bonus of up to $6,000 for qualified technicians. Our benefits package includes competitive salary, health insurance, paid vacation, paid holidays, and a professional work environment designed to support your success and career advancement. Equal Opportunity Statement Scholfield Honda is an Equal Opportunity Employer and maintains a drug-free workplace. We encourage all qualified candidates to apply. Take the Next Step If you are ready to advance your career with a team that values your talents and dedication, apply now and make the most important move of your career! Job Requirement:Qualifications Experience performing warranty and non-warranty inspections, diagnostics, maintenance, and repairs on various vehicle makes and models Proven history of meeting or exceeding performance goals Excellent communication skills Professional appearance and strong work ethic Positive attitude and high energy Exceptional customer service skills Ability to read and understand technical instructions Good judgment and decision-making capabilities Valid state driver’s license with a clean driving record Education and Certifications High school diploma or equivalent ASE certification or demonstrated technical aptitude Technical or trade school degree preferred WHAT WE OFFER: Tremendous product & inventory Ongoing company-wide training Strong company reputation Growth opportunities Professional, enthusiastic & supportive working environment When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug-free workplace. We Would Really Like To Hear From You!

Job Description Come join our growing team at Orr Nissan of Wichita Express Service Lube Technician performs vehicle maintenance as assigned in accordance with Dealer and Factory standards. Duties include engine oil change, engine oil filter change, tire rotations, tire repairs, air filter changes, battery service, wiper blades and detailed maintenance inspections to ensure consumer safety; as well as, maintaining vehicle performance. Starting pay is due to experience.

Job DescriptionDescription: GTG Peterbilt – Wichita, KS is a premier provider of quality products and services to commercial equipment users. We carry a large selection of new and previously owned commercial trucks and offer a full suite of maintenance and repair services. When you build your career at GTG Peterbilt, you make a commitment to being the very best in the business. GTG Peterbilt supplies the trucking industry with the highest quality products, sold and serviced by dedicated, factory-trained employees in order to provide the highest return for their customers. Their commitment to quality and dedication to excellence is the driving force behind their success. We have an immediate opening for a Diesel Technician in Wichita, KS. The successful candidate will perform service and repair on heavy duty trucks covering all makes and models. If you are looking for a new opportunity, we encourage you to apply and grow with us! Requirements: • Determine unit condition by conducting inspections & diagnostic test, identifying deficiencies., • Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications; make necessary adjustments if required., • Perform other routine maintenance work on equipment and vehicles., • Maintain cost efficiency by using warranty, evaluating service & parts options., • Maintain vehicle records with accurate documentation of service and repairs., • Complete engine overhauls as well as other repairs identified during the diagnostic process., • Read schematics for electrical and air systems., • Use good judgment to maintain a safe & organized work environment., • Accept ownership for accomplishing new & different requests & exploring value added opportunities., • Apply knowledge and work in accordance with DOT, Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and other rules and regulations as required., • Other general shop duties as assigned. Skills: • Solid working knowledge of power tools required to perform all phases of truck/chassis repair and maintenance., • Strong mechanical aptitude., • At higher levels of experience demonstrate ability to perform all phases of heavy-duty diesel equipment and services., • Professional and safety minded at all times., • Excellent communication both verbal and written, listening skills., • Good customer service skills., • Ability to prioritize and multi-task in fast-paced environment., • Work with minimal supervision and direction., • Work well independently as well as part of a team. Education: • Preferred minimum of High School diploma or equivalent (GED)., • Certifications from OEM's in the trucking industry., • Preferred- 2 years of tech school 3-5 years of actual truck or heavy equipment repair experience., • Combination of education, training, or experience that provides the required knowledge, skills, and abilities. Requirements: • Valid driver’s license and be insurable. CDL preferred., • Must be able to pass mandatory pre-employment drug screen and background check, • Must have own toolbox and tools., • Steel toe shoes or boots needed. $250 allowance offered after initial 90-day training and evaluation period. Additional Information: Physical: Working in, under, and around trucks and trailers. Ability to lift, push or pull, objects of various shapes, sizes and weights. Safely walk, reach, bend, climb, push, twist, squat and kneel as necessary to perform the essential job duties. Safely walk and stand for extended periods of time. Environmental: Primarily indoors with some outdoor work. High noise level. Uniforms, ear and eye protection provided. Benefits: • Competitive salary and benefits package., • Medical, Dental & Vision insurance, • Eligibility for paid holidays at time of hire., • PTO accrual begins on first day of employment., • 401(k), • 401 (k) match Compensation based on education and experience. GTG Peterbilt is an equal opportunity employer.

Job Description Job Title: Assembly Technician Department: Production (all lines) Reports to: Assembly Lead FLSA (Exempt / Non Exempt): Non Exempt Job Summary: As an Assembly Technician, you will be trained to build valves for numerous aerospace applications. The training will include the usage of many tools, gauges, and various pneumatic and electronic equipment used in the process of building and testing valves. Additionally, you will learn electrical soldering, how to read blue prints, common terminology, and standard practices in aerospace manufacturing. Job Responsibilities: • Assemble and test products as directed by work instructions., • Work as an individual and as a team member., • Keep work area clean and orderly., • Maintain a work environment that is professional, inclusive, efficient, and enjoyable. Supervisory Responsibilities: None Job Qualifications: Required • A strong ability to understand mechanical assemblies and comfortable learning and using various equipment., • An acute attention to detail is extremely important given the complexity of the product., • Good communication skills., • A positive attitude and ability to work cohesively with subordinates, peers, and superiors. Preferred • 2+ years of experience in a similar production environment., • Prior exposure to aerospace requirements and practices., • Background in testing with electronics. Physical Demands: • The tasks require the employee to stand; walk; use hands and fingers; and reach with hands and arms., • The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Tools / Equipment: • Assembly Technicians will use a variety of hand tools and power tools, along with electronic and pneumatic equipment and gauges. Working Conditions: • Temperature controlled factory environment.

Job Description Role Name Industrial Engineer Location Wichita Required Skills • General/Entry level financial knowledge to support operational planning (OP) and budget activities, tracking costs against targets, and identifying financial risks and opportunities., • Analyze operations and workflow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel and optimization of product flow., • Maintain Action Tracker and drive the team for closure of the actions, • Requesting operations team for Quality Gate details, • Representing Operations team in handover meetings., • Identifying part / material shortages ahead to reduce the impact to factory., • Modify SAP according to Travel work and maintain documentation., • Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. Based on these studies, develops and implements optimized product flow., • May assist facilities engineers in the planning and design of facilities., • Develops and provides time standards to the shop floor as well as standard work for operations and processes., • Utilizes analytical skills for capacity analysis, tool and equipment utilization as well as line balancing., • Performs trend analysis of shop performance measures (KPI) to identify risk and opportunities for improvements. Preferred Skills • Experience in an Aerospace Manufacturing environment, • Knowledge of IE tools used in production: capacity analysis, facility layout, and production improvements, • Microsoft Office - advanced skill level, • Knowledge of Aerospace industry and standards, • Excellent communication and presentation skills., • Strong critical thinking, analytical, and problem-solving skills. Required Qualifications: · US Citizen · 2. Bachelor’s degree in mechanical or aerospace or manufacturing engineering · 3. 5 to 10 years working experience with ME & MRO activities in aerospace programs Kaleidoscope, an Infosys Company, is an equal opportunity employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of protected veteran, or disability.

Job Description???? Senior Applications Engineer Great Plains Industries – Wichita, KS Full Time | Onsite | 10–15% Travel Join a Team Where Innovation Runs Deep At Great Plains Industries (GPI), engineering excellence and entrepreneurial spirit are part of our DNA. As a leader in flow meter technology and cloud‑connected fluid management solutions, we thrive on creating products that help move industries forward. Our FLOMEC Flow Meter & Instrumentation team is looking for a highly skilled, customer‑focused Senior Applications Engineer who enjoys solving complex challenges, influencing product design, and serving as the technical authority for advanced applications. If you’re energized by autonomy, technical depth, and meaningful customer impact, this is a great opportunity to grow with a company rooted in innovation and ready for the future. Job Summary The Senior Applications Engineer is the go‑to expert for flow meters and cloud‑connected measurement and fluid management solutions. Operating with a high degree of autonomy, this role leads complex customer applications, advanced integrations, and non-standard technical solutions. You will support strategic sales opportunities, collaborate on product direction, provide top-tier escalated support, and mentor technical team members—playing a key role in ensuring FLOMEC continues to deliver world‑class solutions. What You’ll Do • Analyze complex customer applications, define optimal technical solutions, and guide strategy during the sales process, • Serve as technical lead for high‑value OEM and enterprise accounts, • Provide expert consultation on system-level design, feasibility, and trade‑offs, • Troubleshoot flow meters and cloud-connected products via phone, email, video, and occasional on‑site visits, • Support warranty and return evaluations in partnership with internal teams, • Provide live, real-time support for installation, configuration, and system setup, • Act as the final escalation point for advanced hardware, software, and system integration issues, • Lead root‑cause analysis and collaborate with Engineering, Quality, and Product teams to drive long‑term solutions, • Mentor Product Technical Support team members and help develop their technical capabilities, • Lead or co‑facilitate advanced technical training for internal teams, distributors, and key customers, • Troubleshoot multi‑vendor systems involving PLCs, SCADA, FMS, and control loops, • Recommend non-standard or customized solutions that balance technical risk and business value, • Provide structured, actionable feedback to Product Management and Engineering for roadmap planning, • Represent GPI as a technical ambassador at trade shows, customer visits, and industry events, • Document activities using CRM, ERP, and collaboration tools, • Develop advanced application notes, diagrams, and technical guidance, • Identify documentation gaps and create materials to prevent recurring support issues, • Adhere to all safety requirements, company policies, and ethical standards This job description is not all‑inclusive. Other duties may be assigned as needed. Required Qualifications • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related technical field, • 7+ years in applications engineering, technical sales support, or systems engineering within industrial products, • Proven experience as a technical lead or escalation resource in customer‑facing environments, • Strong written and verbal communication skills, • Experience using CRM/ERP tools to document activities, • Mechanical and electrical aptitude with the ability to master GPI, GPRO, and FLOMEC applications, • Strong time‑management skills and ability to handle shifting priorities, • Self-motivated with a strong sense of ownership and follow‑throughPreferred Qualifications, • Master’s degree in Mechanical or Electrical Engineering, • Experience developing and delivering technical training to diverse audiencesJob RequirementsPhysical Requirements, • Ability to lift up to 20 lbs., • Ability to work at a computer and move throughout the factory floor for extended periods, • Ability to wear safety shoes, glasses, and related PPEWorking Conditions, • 10–15% travel to customer sites and trade shows, • Onsite role located at our Wichita, KS office, • Temperature‑controlled office environment with exposure to lab, manufacturing, warehouse, and customer environments, • Occasional hosting of on‑site customer visits and factory toursBenefits GPI offers a competitive and comprehensive benefits package, including: • Paid Time Off (PTO), • Paid Holidays, • Group Health Insurance (Shared Cost), • Group Dental Insurance, • Flexible Spending Accounts (FSA), • Company-Paid Life and AD&D Insurance, • Short- and Long-Term Disability, • 401(k), • Profit-Sharing Bonus, • Paid Parental Leave About Great Plains Industries More than product. We are a family of innovation Great Plains Industries (GPI) was built on the belief that engineering, ingenuity, and perseverance can create opportunities that last for generations. Founded by engineer Charlie Peer, GPI began as a small entrepreneurial venture that grew into a global leader with a strong family‑owned heritage. In 1968, Charlie launched his first business—Aerospace Systems and Components—by designing an air‑mixing valve for Learjet. As the aviation industry fluctuated, he recognized the stability and potential of the agriculture market. That insight led to the development of an evaporative air conditioning unit and a small transfer pump for combine cabs—products that became the foundation for the company’s future. Through years of innovation, engineering excellence, and building teams fueled by entrepreneurial spirit, Great Plains Industries has grown into the home of the GPI®, FLOMEC®, and GPRO® brands. Today, our products serve a wide range of Industrial, Commercial, and Retail applications—including fuel, agriculture, chemicals, manufacturing, construction, mining, and oil & gas. Our legacy of durability, superior engineering, and strong customer relationships reflects our Midwestern values and deep commitment to the people and industries we serve. In 2013, GPI expanded globally through the acquisition of Trimec Industries of Sydney, Australia—now Great Plains Industries Australia. As a leading manufacturer of flow meters and instrumentation, the addition of Trimec strengthened our global presence and upheld our tradition of reliability and world‑class engineering across Asia and Europe. Backed by the strength of our holding company, Great Plains Ventures, GPI is positioned for a long and exciting future. GPV continues to invest in manufacturing excellence, modernizing processes, developing strong teams, and pursuing strategic acquisitions that support long‑term growth. With two manufacturing and sales locations, we proudly support customers across the globe with localized expertise and a commitment to innovation, quality, and service.

Job Description PDS Defense, Inc. is seeking an Engine Technician, in Tucson, AZ- Wichita, KS- Opa Locka, FL 43 to 48 Hourly DOE and Site Location Job Description: · Adhere to General Work Instructions (Factory, Shop and / or Hanger positions). · Comply with environmental health / safety policies / procedures. Participate in 5-S activities. Perform work in a safe and timely manner. · Perform and document work performed per appropriate manuals and regulations as required. · Inspect engines and/or APU'S, components and associated aircraft systems and components for damage, defects, corrosion, or other wear to ensure airworthiness in accordance with appropriate maintenance manuals. · Interpret discrepancies or maintenance logs (written or verbal) to understand history and nature of issue, to troubleshoot and identify required next steps to return to service and or airworthy condition. · Recommends replacement, repair, or modification of aircraft engines/APU'S based on inspection. · Perform installation, removal or modifications of turbine engines/APU's, systems or components, following drawings, schematics, engineering orders, and technical publications. · Perform repairs on worn, defective, or damaged parts or components (e.g., damaged gaskets, lines and couplings), using hand tools, gauges and testing equipment. · Research, read, and interpret technical manuals and guidelines to perform inspections, installations, repairs, or other work activities. · Conduct and assist with engine/APU's and related systems operational checks and functional tests. · Install, remove, or modify aircraft structures, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications. · Inspect completed work to certify that maintenance adheres to standards and procedures, and that aircraft are ready for operation. · Assist other employees in the performance of general aircraft maintenance task and their duties within area(s) of qualification. · Assist Aviation Maintenance Technicians in the operation of ground support equipment (GSE), for example, ground power units, hydraulic mules, and oxygen servicing units as needed. · Assist with performing complete engine runs. · Operate ground support equipment. · Assist with off-aircraft component repair. · Perform mechanical / electrical removals and installations. · Perform other duties as assigned. How to thrive in this role? · FAA Airframe and Powerplant License · A minimum of eight (8+) years aircraft turbine engine line or shop maintenance or substantiated equivalent experience · A minimum of two (2) years' experience on corporate jet aircraft · A minimum of one (1) year experience on aircraft · Proficient in completing engine R&R'S, borescopes and written reports Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter. Military connected talent encouraged to apply. VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/ The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceCompany DescriptionPDS Defense offers talent acquisition and SOW/Engineering solutions in the aerospace, defense, machinery, communications, energy, technology and service industries. We’re focused on developing strong, lasting relationships with our customers to deliver creative and comprehensive solutions that support their talent acquisition strategies. Our flexible business model allows us to provide not only solutions for contract and direct opportunities, but also offload engineering design services, SOW projects, and more.PDS Defense offers talent acquisition and SOW/Engineering solutions in the aerospace, defense, machinery, communications, energy, technology and service industries.\r\n\r\nWe’re focused on developing strong, lasting relationships with our customers to deliver creative and comprehensive solutions that support their talent acquisition strategies. Our flexible business model allows us to provide not only solutions for contract and direct opportunities, but also offload engineering design services, SOW projects, and more.

Job Description Do you have experience working with wood and/or upholstery? Love working on your own time? Come see what it’s like at Touch Up Home Furniture Repair! • Flexibility: We work around YOUR schedule by matching up your availability with our customer’s availability., • Satisfaction: Fix problems with customer’s furniture to get it looking just like new!, • Support System: Have a support line just a call away if you run into any issues while on a job., • Regular Pay: We pay by the job and pay weekly. What We Ask: • Have experience working with wood. You must:, • Know how to mix and match stain colors, • Have knowledge of finishes and woods, • Be able to sand and prep, • Fix nicks and dents, • Have experience working with upholstery. You must have knowledge of:, • Reupholstering, • Hand/machine sewing, • Cutting, • Upholstery fills, • Stain removal You must have your own transportation and tools. All work is completed in customer homes or businesses, not in a workroom or factory. Please have a working phone number and email so we can contact you. Disclaimer: We will not ask for personal information prior to the start of our official hiring process. Please do not provide any personal information until you have begun the verified hiring process with us. We are affiliated with a professional trade apprenticeship program for those interested in further developing their skill set. Learn more: https://learnhta.com/ Company DescriptionTouch Up Home is a furniture repair company & Mobile Furniture Group is a mobile reupholstery company.Touch Up Home is a furniture repair company & Mobile Furniture Group is a mobile reupholstery company.

Job Description Summary of Position The CNC Machine Maintenance Technician is responsible for installing, maintaining, and repairing items such as CNC machinery, factory equipment, and vehicles in a safe and productive manner. This position is also responsible for supporting the production department in the creation of goods and services as may be required to service customers when maintenance requirements are up to date. Responsibilities and Duties As a minimum, the following is a basic description of typical duties and responsibilities expected of the Maintenance Technician. These duties are not exhaustive and are subject to change as the needs of the organization require. -Testing, diagnosing, repairing, and maintaining machine tools including CNC controls, PLC hardware and software, control circuits, electro/mechanical systems, hydraulic, and pneumatic systems. -Visually inspect and test machinery and equipment according to manufacturer’s specifications. -Perform preventative and predictive maintenance according to published schedule to meet production demand. -Clean and lubricate shafts, bearing, gears and other parts of machinery. -Dismantle defective machines and equipment and install new or repaired parts. -Perform adjustments, alignments, and calibrations on equipment. -Read and follow blueprints, drawings, and schematics. -Troubleshoot and repair factory equipment and CNC equipment. -Install and upgrade new and current equipment. -Adhere to Company's’ safety rules, regulations, and quality standards. Required Qualifications -High school diploma or equivalent. -Two or more years of CNC machine maintenance experience. -Strong mechanical and electrical abilities, manufacturing experience, and understanding of safety and environmental practices. -Strong analytical skills and demonstrated problem-solving abilities. -Ability to read/interpret blueprints and schematics. -Ability to collaborate well with a team as well as independently. Preferred Qualifications -Four or more years of CNC machine maintenance experience. -Two-year technical degree in Mechanical or Electrical Technology. -Basic knowledge of hydraulic and pneumatic systems. -Familiar with manufacturing processes and machining equipment. -Machine tool experience including major upgrades, revisions, and installations both mechanically and with control systems. Company DescriptionWhether you want to change careers or find yourself unemployed, Summit Employment can help you land the right job, with the right company. We will assess your skills, experience, background, and past performance through a customized interview process to help gauge the best opportunities possible.Whether you want to change careers or find yourself unemployed, Summit Employment can help you land the right job, with the right company. We will assess your skills, experience, background, and past performance through a customized interview process to help gauge the best opportunities possible.

Job Description Title: Application Engineer Operating Company: Building Controls & Services Inc. Location: Wichita, KS FLSA Status: Exempt Salary Range: $60-84k About: Building Controls & Services Inc. – A member of the AIR Control Concepts family. Building Controls and Services, Inc. (BCS) is an HVAC and building automation company founded in 1985, serving Kansas and Western Missouri. The company provides heating and air conditioning, building automation, energy management, and indoor air quality solutions, with a focus on system efficiency and long-term cost control. Check out our website: Home - Building Controls and Services, Inc. Job Description: The Applications Engineer coordinates with the outside sales team to promote, estimate, and quote various product lines represented by BCS. Minimum Duties and Responsibilities: Pre-Design Responsibilities • Basic HVAC knowledge and understanding of all BCS product lines., • Creates pre-job in Spectrum for time keeping and creates pre-job folder with correct templates., • Keeps folder structure organized and updated., • Selects and estimates HVAC equipment & other miscellaneous items from our product lines with Outside Sales., • Provide timely, technical and project related support and communication to Outside Sales and other BCS departments., • Generates basic controls layout, piping layouts, controls schematics and control sequences., • Generates equipment schedules and equipment specifications., • Identify and position to any possible spec opportunities to create stronger package on bid day.Job Bid Responsibilities, • Job takeoff with review of job plans, specifications, and work with Outside Sales to address any discrepancies., • Attends pre-bid walk throughs with SE assigned on project (when necessary)., • Generate equipment bid pricing and scope to meet bid timeline., • Generate equipment approval requests.Coordinate Product and Equipment Orders, • Supports Sales Admin with gathering of required documentation for job setup., • Complete job hand-off forms and attend job hand off meetings., • Creates jobs folder with correct templates once project is won and submittal is requested., • Creates submittals for various equipment., • Completes factory control configurations., • Order entry for various product lines., • Support Operations with design questions post hand-off., • Assists Outside Sales with change orders pricing requests.Training and Development, • Studies literature and attends training seminars to keep current in products, processes, and materials., • Must be familiar with competitor’s product lines and how BCS products meet or exceed specification., • Create any required tools (as assigned) to improve processes., • Assist with training and developing Equipment Application Engineer interns. Minimum Experience and Requirements: Education: • Bachelor’s degree in Engineering, Engineering Technology, or related equivalent experience. Skills and Experience: • 1-3 years of experience in engineering systems or related field preferred, • Basic knowledge of engineering fundamentals and HVAC concepts and operations, • Excellent oral and written communication skills, • Mathematical abilities to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and create and interpret graphs, • Possesses a strong ability in problem solving, • Organized with attention to detail, • Ability to read and interpret mechanical plans and specification preferred Certificates, Licenses, Registrations: • Valid driver license Other Requirements: • Requires occasional travel to and from job sites, and trainings, primarily within the local area and Kansas, • Requires occasional overnight stays Physical Requirements: Requires standing, walking, bending, squatting or twisting on a regular basis. May require the ability to climb, balance, stoop, kneel, crouch, crawl or reach with hands and arms occasionally. Requires the ability to carry, lift, move or push up to 20 pounds on a regular basis and may be required to carry, lift, move or push 100 or more pounds on an occasional basis. Must be able to talk and listen to others. Frequently uses hands or fingers to handle of feel. Frequent use of manual dexterity and visualization of a computer screen through the day. Requires ability to see up close and distant, distinguish colors, peripheral vision, depth perception and the ability to adjust focus. Work Environment: • This position regularly works in an office setting but occasionally visits job sites in all types of indoor and outdoor conditions including near moving mechanical parts, in high, precarious places, extreme heat, cold and humidity. Occasional exposure to toxic or caustic fumes or chemicals. Regular noise levels range from minimal to moderate but may be very loud when visiting job sites., • Most of the job duties require the employee to be working with computers and electronic media on a regular basis. To perform this job successfully, an individual must be able to complete all areas outlined for this position in a satisfactory manner. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The above statements are intended to describe the general nature and level of work being performed by most people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and requirements. Benefits: We offer a competitive and comprehensive benefits package, including: • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with company match, • Life Insurance & Health Savings Account (HSA), • Health Reimbursement Arrangement (HRA), • Short-Term and Long-Term Disability Insurance, • Critical Illness & Accident Insurance, • Employee Assistance Program (EAP) and Flexible Spending Accounts (FSA), • Paid Time Off (PTO) and Paid Holidays The Company provides equal employment opportunity in accordance with applicable laws and prohibits discrimination and harassment. Employment decisions are based on business needs and qualifications. The Company complies with disability laws and provides reasonable accommodations to qualified individuals. Powered by JazzHR 3981bCC3jE

Job Description The Director of Training owns Yingling's technical, regulatory, and workforce-development training programs across maintenance, avionics, and line/FBO operations. The role ensures that personnel are trained, qualified, and current to the standards required by the company's Repair Station and Quality Manual and applicable Federal Aviation Regulations. This is an individual-contributor position: the Director builds and administers the training system directly and is expected to grow it into a broader function as the organization scales. KEY RESPONSIBILITIES • Training program ownership. Develop, maintain, and administer the Repair Station Training Program required under 14 CFR 145.163, keeping it aligned with the Repair Station and Quality Manual and current FAA guidance., • Records & currency. Maintain accurate training and qualification records for technicians, inspectors, and other affected personnel; track certificate, rating, authorization, and currency status and flag upcoming expirations., • Curriculum & delivery. Design and deliver, or coordinate the delivery of, initial/indoctrination, recurrent, on-the-job (OJT), and human-factors training; document competency assessments and OJT sign-offs., • External training. Coordinate OEM/factory, avionics, and vendor training and manage the associated scheduling, travel, and cost tracking., • Systems & reporting. Administer the learning management system (or equivalent) and maintain the company training matrix so requirements, completions, and gaps are visible to leadership., • Safety & compliance training. Partner with the Director of Safety to deliver safety-culture and SMS-related training, and coordinate EHS/OSHA-required training (e.g., hazardous materials, lockout/tagout, fall protection)., • Audit support. Support FAA and internal/customer audits by producing training documentation and closing training-related findings., • Budget input. Provide input to the annual training budget and identify cost-effective, compliant training solutions. QUALIFICATIONS Required • Aviation maintenance background with working knowledge of 14 CFR Parts 43, 65, and 145., • Demonstrated experience developing or administering training programs in a Part 145 repair station, or a comparable regulated aviation environment., • Strong recordkeeping discipline and comfort with training-tracking systems and reporting., • Effective communicator able to instruct and coach technical staff across experience levels. Preferred • FAA Airframe & Powerplant (A&P) certificate; Inspection Authorization (IA) a plus., • Formal training in instructional design, adult learning, or human factors in aviation maintenance., • Familiarity with FBO/line-service and avionics training requirements. WORK ENVIRONMENT & PHYSICAL REQUIREMENTS Work is performed in a combination of office, classroom, hangar, and ramp environments. The role requires periodic time in active maintenance areas with exposure to aircraft, ground equipment, noise, and typical shop conditions, and may involve occasional standing, walking, and lifting of training materials or equipment. Some travel may be required for OEM or vendor training. What We Offer • Competitive salary with performance-based incentives., • Comprehensive benefits package, including health insurance and retirement plans., • Opportunities for professional growth and development., • A dynamic, supportive team culture that values innovation and collaboration. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify.

Job Description The Lifestyle You Want. The Support You Need To Get There. You chose a truck driving career because it gave you freedom. Now you want more control over your lifestyle, so you’re thinking about leasing options. Get the support you need to be successful with one of the best lease-purchase flatbed trucking companies, Anderson Trucking Service (ATS). From the process of starting your lease to finding freight that makes you money, we’ll be here for you when you need us. Other Lease Operator Benefits • One, two and three-year lease purchase options, • 2020 or newer Freightliner, Peterbilt or Volvo trucks, • Earn 70% - 72% of the Gross, • Top 50% earn gross $4,900 ($1,700 take-home), • Top 20% earn gross $6,800 ($3,100 take-home), • No money down, • No credit check, • Fuel discounts, • Tire fund: 1.8 CPM comes out of your check and covers the costs of new tires when you need them, • No fixed expenses for two weeks, • Ask about our sign-on bonus, • One-year lease: $4,000 completion bonus, • Catastrophic in term of lease — Bumper-to-Bumper is 30 days + all factory warranty, • Purchase options available at the end, • $110 per month for in-cab tablet/communication device, • $15 per month for toll/scale transponder (up from $10), • $50 per week for plates, • $50 per week for trailer usage (any trailer type), • OPTIONAL $2.98 per week for a legal plan, • Contractors will earn a fuel surcharge based on DOE diesel prices. Drivers receive 100% of our fuel discountsLease Operator Requirements:, • Must be at least 21 years old, • Valid Class A CDL driver’s license, • Must have at least 12 months verifiable OTR experience, • Must meet DOT requirements, • Must have a stable, verifiable work history and acceptable driving record

Job Description The Lifestyle You Want. The Support You Need To Get There. You chose a truck driving career because it gave you freedom. Now you want more control over your lifestyle, so you’re thinking about leasing options. Get the support you need to be successful with one of the best lease-purchase flatbed trucking companies, Anderson Trucking Service (ATS). From the process of starting your lease to finding freight that makes you money, we’ll be here for you when you need us. Other Lease Operator Benefits • One, two and three-year lease purchase options, • 2020 or newer Freightliner, Peterbilt or Volvo trucks, • Earn 70% - 72% of the Gross, • Top 50% earn gross $4,900 ($1,700 take-home), • Top 20% earn gross $6,800 ($3,100 take-home), • No money down, • No credit check, • Fuel discounts, • Tire fund: 1.8 CPM comes out of your check and covers the costs of new tires when you need them, • No fixed expenses for two weeks, • Ask about our sign-on bonus, • One-year lease: $4,000 completion bonus, • Catastrophic in term of lease — Bumper-to-Bumper is 30 days + all factory warranty, • Purchase options available at the end, • $110 per month for in-cab tablet/communication device, • $15 per month for toll/scale transponder (up from $10), • $50 per week for plates, • $50 per week for trailer usage (any trailer type), • OPTIONAL $2.98 per week for a legal plan, • Contractors will earn a fuel surcharge based on DOE diesel prices. Drivers receive 100% of our fuel discountsLease Operator Requirements:, • Must be at least 21 years old, • Valid Class A CDL driver’s license, • Must have at least 12 months verifiable OTR experience, • Must meet DOT requirements, • Must have a stable, verifiable work history and acceptable driving record

Job Description The Lifestyle You Want. The Support You Need To Get There. You chose a truck driving career because it gave you freedom. Now you want more control over your lifestyle, so you’re thinking about leasing options. Get the support you need to be successful with one of the best lease-purchase flatbed trucking companies, Anderson Trucking Service (ATS). From the process of starting your lease to finding freight that makes you money, we’ll be here for you when you need us. Other Lease Operator Benefits • One, two and three-year lease purchase options, • 2020 or newer Freightliner, Peterbilt or Volvo trucks, • Earn 70% - 72% of the Gross, • Top 50% earn gross $4,900 ($1,700 take-home), • Top 20% earn gross $6,800 ($3,100 take-home), • No money down, • No credit check, • Fuel discounts, • Tire fund: 1.8 CPM comes out of your check and covers the costs of new tires when you need them, • No fixed expenses for two weeks, • Ask about our sign-on bonus, • One-year lease: $4,000 completion bonus, • Catastrophic in term of lease — Bumper-to-Bumper is 30 days + all factory warranty, • Purchase options available at the end, • $110 per month for in-cab tablet/communication device, • $15 per month for toll/scale transponder (up from $10), • $50 per week for plates, • $50 per week for trailer usage (any trailer type), • OPTIONAL $2.98 per week for a legal plan, • Contractors will earn a fuel surcharge based on DOE diesel prices. Drivers receive 100% of our fuel discountsLease Operator Requirements:, • Must be at least 21 years old, • Valid Class A CDL driver’s license, • Must have at least 12 months verifiable OTR experience, • Must meet DOT requirements, • Must have a stable, verifiable work history and acceptable driving record

Are you looking for a company with unlimited compensation opportunity, weekly pay, and advancement to management roles? Leaf Home Stairlift, a division of Leaf Home LLC is looking to grow our team of Outside Sales Representatives TODAY! Why Work with Leaf Home Stairlift? Working with Leaf Home Stairlift is more than just another job - it is an opportunity to earn a sizable and consistent income, the freedom to grow your career on your terms, and a chance to put down roots in your community. We will supply you with pre-qualified leads and the tools for success so you can set out and start earning!! You'll be helping homeowners by introducing them to the best Stair Lifts on the market. Demonstrate a product that sells itself with pre-set appointments that are provided to you! Our highly successful, multi-channel lead generation platform provides you with high-converting, and quality pre-set sales appointments. What’s in it for me?  Prequalified scheduled leads – We provide all the quality leads you want; you just close the sale  Superior product – Our products are factory direct…there is no comparison!  Financial Freedom – Earn an average of $100k+ in the first year…Our top rep earned $250k in 2023!!  Weekly Pay – We pay weekly through direct deposit, so no more waiting weeks or months to be paid  Advancement – Endless opportunity for growth and advancement (95% of our Sales Operations Managers start as Sales Reps) Essential Duties and Responsibilities:  Meet with prospective customers using established sales methodology to educate, consult, inform, and sell!  Responsible for using established sales methodology to sell customers the proper product that fits their needs  Develop a rapport and conversation with the customer to facilitate one visit close  Leverage industry-leading product samples, support, and technology to assist you in closing the sale  Commitment to an outstanding customer service experience from beginning to end  Excellent communication and organizational skills  Energetic and engaging interpersonal skills with the drive to succeed  Ability to overcome objections in the sales process  Travel within the assigned territory based on provided and self-generated leads

Experience working in warehouse, distribution, manufacturing, parts, or logistics environments. Under some supervision, follow established procedures and guidelines to receive, handle, store, perform system transactions and dispatch goods in a factory or warehouse. Accurately sort, label, store good

Company Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Responsibilities Adhere to General Work Requirements (Factory, Shop and / or Hangar positions) Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner Troubleshoot, repair, install, inspect and perform engine maintenance on customer aircraft Perform and document work completed per appropriate manuals and regulations as required Inspect incoming parts and documentation to meet regulatory requirements Assist in other maintenance disciplines - Avionics, Structures, Composites etc. Operate ground support equipment as required Assist with mechanical / electrical removals and installations Return aircraft to service after maintenance at off-site locations Act as shipping and receiving agent for parts Provide time estimates Audit your own location and truck monthly * Perform other duties as assigned

At GAF, we cover more than buildings. We cover each other. No matter what role, tenure, or track, under this roof you are empowered to be there for your teammates, your customers, and especially your community. Under this roof, we don't back down from hard work- we support one another in pursuit of something bigger. We define the future while leading the present. And under this roof, we own our opportunities. Becoming the market leader only happens when everyone feels they have the opportunity, and the support, to thrive. We are GAF. And under this roof, we protect what matters most. Job Summary The Director of Environmental Compliance is in charge of establishing, implementing, and overseeing corporate environmental programs, permitting, remedial efforts, and ensuring compliance with government regulatory authorities. This job will drive the strategy and oversee the implementation of environmental practices at all locations, as well as work with site EHS staff to support plant operations. This role will report directly to the Vice President of Environmental, Health, and Safety and oversee two direct reports and contract personnel. Essential Duties Specific responsibilities include, but are not limited to: ● Create a future-state vision for environmental excellence and a well-defined, multi-phased execution strategy. ● Responsible for overseeing all aspects of the company's environmental initiatives including working alongside third party vendors and environmental counsel to achieve company objectives. ● Providing technical expertise, guidance, and leadership to implement applicable programs, such as remediation, wastewater, regulated waste, SPCC, air emissions, environmental sustainability strategies, etc. ● Have a general understanding of Federal and state environmental regulations and the ability to evaluate and interpret requirements as they apply to our operations. ● Partner across functions to ensure robust systems in place to meet regulatory and stakeholder expectations in the areas of environmental compliance. ● Evaluating and recommend options to improve air pollution control technology. ● Experience preparing permit applications and air emission calculations. ● Perform calculations to support reporting, permit applications and compliance requirements, such as for air emissions, chemical inventories, and water discharges. ● Serve as resource to compliance, engineering, and operations staff. ● Working with project teams and plant personnel to ensure environmental compliance at new and existing facilities. ● Monitor and understand emerging trends in environmental programs and regulations; identify and communicate potential impacts; develop short- and long-term strategies to ensure adequate preparedness. ● Train, mentor, and develop EHS resources and leadership with respect to environmental programs, requirements, and risks. ● Participate in incident investigations as a team member and subject matter expert to identify root causes and effective corrective actions. ● Partnering with Senior Leadership on potential acquisitions. ● Liaise with internal and external counsel and subject matter experts on environmental projects, matters, and regulations. Qualifications Required ● Bachelor's degree in Environmental, Civil, Mechanical, or Chemical Engineering degree is required ● Post graduate degree, preferred. ● Professional Engineer, preferred. ● 15+ years environmental management experience, 10+ years management of people and engineering. ● Ability to travel overnight up to 50%. ● Problem-solving using standard engineering / scientific methods. ● Ability to effectively adapt to changing needs and priorities while maintaining a positive attitude with a focus on client success. ● Exceptional interpersonal skills that are leveraged to build relationships and trust with internal and external stakeholders. ● Strong strategic thinking, problem-solving and decision-making skills. ● Commitment and engagement through a high level of work ethic and utilization of abilities for the best of the company. ● Must have excellent organizational, written and oral communication, listening and presentation skills including the ability to effectively present and discuss technical information and respond to questions from employees, government agency representatives, and customers. ● Excellent interpersonal skills with ability to establish trust and relationships. ● Demonstrated openness to change, flexibility, and adaptability. ● Ability to motivate teams and simultaneously manage multiple projects. ● Intermediate knowledge of Google Suite Office. Base salary and/or rate of pay ranges listed are exclusive of fringe benefits and potential bonuses. Individual compensation offers will be determined based on a variety of factors, including but not limited to geographic location, relevant candidate experience and skill, education, and/or qualifications. Base Salary Range: $153,000-$195,500 How We Protect What Matters Most: 1. We offer a wide range of health insurance options that include medical, dental, and vision for you and your family. 2. Our Family-Building benefits support the many different journeys to fertility and parenthood. 3. Our robust 401K plan includes an employer match contribution with your pre-tax and/or Roth contributions. 4. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employee's primary residence. 5. Professional growth and development are very important to us! We offer internal training programs and courses, as well as a generous tuition reimbursement program. 6. We're committed to fostering a culture that reflects our values to connect, empower, evolve, and inspire. We offer many opportunities for employees to connect with one another, including through our Employee Resource Groups who focus on education and allyship for all of our employees. GAF complies with federal, state, and local disability laws and makes reasonable accommodations for applicants and employees with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR Services at 833-HR-XPERT. We believe our employees are our greatest resource. We offer competitive salary, benefits, 401k, and vacation packages for all full time permanent positions. We are proud to be an equal opportunity workplace. We are committed to equal employment opportunity on the basis of each candidate's qualifications, experience, and merit, without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., must be eligible to work in the U.S. without need for employer sponsored visa (work permit). Privacy Notice (https://www.gaf.com/en-us/about-us/privacy-and-legal/privacy-policy) Applicant Notice With 130+ years in the industry, GAF is the leading roofing manufacturer in North America. As a member of the Standard Industries family of companies, we are also part of the largest roofing and waterproofing business in the world. Our communities help give our work meaning and the products we manufacture help protect what matters most. The shingles help to shelter the families living in the homes in our towns. The TPO helps protect what is under that hospital's roof. In addition to quality products, we make sure they are installed by quality craftsmen and women. The full GAF portfolio of solutions is supported by an extensive national network of factory-certified contractors. GAF continues to be the leader in quality and offers comprehensive warranty protection on its products and systems. Our success is driven by a commitment to empowering our people to deliver advanced quality and purposeful innovation and the desire to protect what matters most.

Service Center Wichita - Oliver St Every day, over 20,000 car accidents disrupt lives. When our customers face one, we step in to make things right - quickly, confidently, and with care. At Caliber, fixing fenders has its benefits-like working with modern equipment, opportunities to create a career that works for you, and a center safety rating that helps make sure you get home to your family each night. Are you the right fit? If you find yourself nodding your head to the list below, Caliber might be right for you. Experienced hands-At least two years of turning wrecks into road-ready rides. Frame and structural know-how-If you can pull, straighten, and square it up, we want you. No-shortcuts mentality-Blueprint it, fix it right the first time. Sharp eye for detail-You're committed to tightened bolts, perfected welds, and no excuses. Physically fit for the job-You can lift up to 50lbs. Team-first attitude-You collaborate with the painters, estimators, and front office staff in the business. Must be eligible to work in the U.S. with no restrictions What's in it for you? We value your skills and reward you with solid benefits, performance-based earning potential, and opportunities to build a career that moves you forward. Competitive pay-Unlimited work paired with a flag rate of up to $20-$30 paid weekly means your hard work is rewarded. Career growth-Opportunities to create a career that works for you. Training that levels you up-I-CAR, ASE certifications-we invest in you. Paid time off and holidays-Start accruing time off on day one and enjoy six company-wide holidays each year. Day-one benefits-Medical, dental, vision, 401k match-no waiting. Best equipment and tech in the business-3M products, industry-leading gear. How will you spend your days? No two crashes are identical, which means your days are filled with new challenges and interesting work. Blueprint and execute-No guesswork, no shortcuts-just clean, precise repairs. Full collision repair-From fender benders to frame rebuilds, you handle it all. Panel and structural work-If it's bent, twisted or torn, you bring it back to factory specs. Quality reassembly-Fit and finish matter-your final touches make all the difference. Work as a team-Trust and teamwork move cars through. * Keep it clean-A pro always puts work location safety and tidiness first. Accidents are our business. Being a great place to work? We do that on purpose. Apply today Caliber is an Equal Opportunity Employer Caliber uses E-Verify to confirm the identity and employment eligibility of all new hires. Must be eligible to work in the U.S. with no restrictions.

Job Description Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining. At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees. Job Title: CNC Maintenance Technician Employee Type: Full Time, Hourly Reports to: Facilities & Maintenance Manager Job Location: Wichita, KS, USA Experience: 5+ years in CNC machine maintenance Pay Rate is dependent upon years and level of experience Hours/Shift: 1st Shift (Mon-Fri; 7am-4:30pm), 2nd Shift (Mon-Fri; 4pm-12:30am), Weekend Shift (Fri-Sun; 11am-11:30pm) Job Duties: • Independently diagnoses and repair unusual and difficult electronic, electrical, hydraulic and mechanical malfunctions of computer controlled electronics and subsystems to optimum operating condition, • Regularly uses a wide variety of test equipment including oscilloscopes, frequency counters, function generators, stroboscopes, laser measurement equipment, voltmeters and ammeters in machine diagnoses and repair, • Becomes thoroughly familiar with and adheres to machine operation and adjustment procedures, lubrication and alignment requirements and preventive maintenance instructions, including adjusts, calibrates and verifies operational performance of subsystems and their integration with other systems, • Assists in developing and performing preventive maintenance including periodic inspection, testing and servicing of machines, • Works from specific instructions, maintenance manuals, manufacturer’s specifications, safety regulations, codes, blueprints, diagrams and other general operating instructions, • Maintains documentation and service records as required, • Works with equipment manufacturer's service personnel during installation, alignment, calibration, repair or modification of machines, • Installation, maintenance and repair of machine and machine components, • Testing machines and troubleshooting in case of problems, • Recording the performance of each machine with regard to intake and output and present it to management, • Suggest ways to improve the performance of machines, • Maintenance of the equipment required for installation and repair of machines, • All other projects as assigned by management Requirements: • 5+ years of experience as a machine maintenance technician in a manufacturing environment, • Experience working with SNK, DNG, Makino, and Mori Seiki, preferred, • Experience repairing a wide variety of mechanical, electrical and hydraulic principles and their application to machine tools and factory equipment, • Knowledge of basic electronic and mechanical principles, • Able to operate and interpret data from standard electronic instrumentation such as digital multimeters, power analyzes and oscilloscopes, • Must be competent in the use of blueprint and schematic materials and in using a wide range of appropriate machine diagnostic equipment, • Knowledge of installation and repair of machines and correct tool usage to include meters and other devices to measure accuracy, • Knowledge of permissible standards to be maintained for machines, • Ability to analyze, identify and rectify problems, • Knowledge of safety precautions while working with machines, • Familiar with building codes, electrical, and plumbing codes, • Proven attendance record, • Organizational skills along with the ability to multi-task while being self-motivated, • Excellent verbal skills and ability to train others, • Ability to speak, read, write, and understand English language, • High school education or equivalent and two years specialized training in mechanical/electronics repair Working Conditions: • Some overtime may be necessary, • Ability to regularly and frequently lift 50 pounds, • The essential duties job may require the ability to stoop; to reach; to stand, and to walk for extended periods of time; to push and/or pull objects weighing up to 30 pounds; to lift and carry objects weighing up to 50 pounds; to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects; to perceive the attributes of objects by touch; to hear and verbally exchange ideas and information with the public, staff and others in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items. Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and service requests. Occasionally Lifting and carrying (with assistance) items weighing 75-150 lbs. Must be able to wear safety PPE equipment, as required. Noise levels may require hearing protection. Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining. At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees. Job Title: CNC Maintenance Technician Employee Type: Full Time, Hourly Reports to: Facilities & Maintenance Manager Job Location: Wichita, KS, USA Experience: 5+ years in CNC machine maintenance Pay Rate is dependent upon years and level of experience Hours/Shift: 1st Shift (Mon-Fri; 7am-4:30pm), 2nd Shift (Mon-Fri; 4pm-12:30am), Weekend Shift (Fri-Sun; 11am-11:30pm) Job Duties: • Independently diagnoses and repair unusual and difficult electronic, electrical, hydraulic and mechanical malfunctions of computer controlled electronics and subsystems to optimum operating condition, • Regularly uses a wide variety of test equipment including oscilloscopes, frequency counters, function generators, stroboscopes, laser measurement equipment, voltmeters and ammeters in machine diagnoses and repair, • Becomes thoroughly familiar with and adheres to machine operation and adjustment procedures, lubrication and alignment requirements and preventive maintenance instructions, including adjusts, calibrates and verifies operational performance of subsystems and their integration with other systems, • Assists in developing and performing preventive maintenance including periodic inspection, testing and servicing of machines, • Works from specific instructions, maintenance manuals, manufacturer’s specifications, safety regulations, codes, blueprints, diagrams and other general operating instructions, • Maintains documentation and service records as required, • Works with equipment manufacturer's service personnel during installation, alignment, calibration, repair or modification of machines, • Installation, maintenance and repair of machine and machine components, • Testing machines and troubleshooting in case of problems, • Recording the performance of each machine with regard to intake and output and present it to management, • Suggest ways to improve the performance of machines, • Maintenance of the equipment required for installation and repair of machines, • All other projects as assigned by management Requirements: • 5+ years of experience as a machine maintenance technician in a manufacturing environment, • Experience working with SNK, DNG, Makino, and Mori Seiki, preferred, • Experience repairing a wide variety of mechanical, electrical and hydraulic principles and their application to machine tools and factory equipment, • Knowledge of basic electronic and mechanical principles, • Able to operate and interpret data from standard electronic instrumentation such as digital multimeters, power analyzes and oscilloscopes, • Must be competent in the use of blueprint and schematic materials and in using a wide range of appropriate machine diagnostic equipment, • Knowledge of installation and repair of machines and correct tool usage to include meters and other devices to measure accuracy, • Knowledge of permissible standards to be maintained for machines, • Ability to analyze, identify and rectify problems, • Knowledge of safety precautions while working with machines, • Familiar with building codes, electrical, and plumbing codes, • Proven attendance record, • Organizational skills along with the ability to multi-task while being self-motivated, • Excellent verbal skills and ability to train others, • Ability to speak, read, write, and understand English language, • High school education or equivalent and two years specialized training in mechanical/electronics repair Working Conditions: • Some overtime may be necessary, • Ability to regularly and frequently lift 50 pounds, • The essential duties job may require the ability to stoop; to reach; to stand, and to walk for extended periods of time; to push and/or pull objects weighing up to 30 pounds; to lift and carry objects weighing up to 50 pounds; to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects; to perceive the attributes of objects by touch; to hear and verbally exchange ideas and information with the public, staff and others in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items. Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and service requests. Occasionally Lifting and carrying (with assistance) items weighing 75-150 lbs. Must be able to wear safety PPE equipment, as required. Noise levels may require hearing protection. Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Call Center Representative Agent - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Call Center Representative Agent experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, administrative assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call center representative, call center agent or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

Data Entry Clerk - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Data Entry Clerk experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • High school diploma or it’s equivalent, • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, admin assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call centre employee or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

Call Center Representative Agent - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Call Center Representative Agent experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, administrative assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call center representative, call center agent or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

Call Center Representative Agent - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Call Center Representative Agent experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, administrative assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call center representative, call center agent or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

Administrative Assistant - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Administrative Assistant experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, administrative assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call centre employee or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

Administrative Assistant - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Administrative Assistant experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, administrative assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call centre employee or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

Data Entry Clerk - Remote Work From Home Focus Group Panelist - Full Time / Part Time Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Data Entry Clerk experience is not necessary but helpful, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • High school diploma or it’s equivalent, • $75-$150 (per 1 hour session), • $300-$750 (multi-session studies) This position is perfect for those looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk, admin assistant, receptionist, warehouse or factory worker, driver, medical assistant, nurse, call centre employee or anyone who is looking for a flexible part time remote work from home job, this is a great position to supplement your income.

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

Receptionist - State Farm Agent Team Member.David Curry - State Farm Agent is a leading insurance agency dedicated to providing exceptional service to our customers.We are currently seeking a dynamic individual to join our team as a Receptionist - State Farm Agent Team Member.Our ideal candidate is

Customer Relations Representative - State Farm Agent Team Member.As a Customer Relations Representative - State Farm Agent Team Member with Crystal McEachern - State Farm Agent, you will generate the kind of exceptional client experiences that reinforce the growth of a successful insurance agency.Yo

Court Monitor, Front Desk, Party Host And Caf Positions.Urban Air is seeking qualified and energetic individuals for Court Monitor, Front Desk, Party Host and Caf Positions.Applicants MUST have reliable transportation to and from the Park, and must possess the ability to work at least one (1) shift

General Labor Employee Jobs | Wichita KS.Focus is looking for candidates that are efficient, safety-minded General Labor Employee First Shift for a facility in Wichita, Kansas.Ideal candidates will be able to work with minimal oversight but willing to follow detailed instructions.Job duties may incl

Bosch Home Solutions is seeking a Material Handler.This role is responsible for moving materials, loading and unloading trucks, and supporting daily production and inventory operations.Operate sit?down, stand?up, or reach forklifts to move materials throughout the facility.Load and unload trailers,

Source 1 - Advanced Material Handler - 1st Shift.The Advanced Material Handler (Source 1) is responsible for operating order pickers and standard forklifts to support shipping, receiving, and production activities.This position involves accurately picking, moving, and organizing materials, including

Aerospace Materials Handling Specialist.The individual in this role is responsible for receiving, storing, tracking, and distributing materials, components, and equipment used in aerospace manufacturing and maintenance operations.This role ensures that all materials meet strict quality, safety, and