Senior project manager jobs in Knoxville, TennesseeCreate job alerts

Job Description Position Purpose Overall responsibility for operating the store at maximum sales and profit with the Company policies and procedures. Job Scope Store Manager is expected to work the number of hours necessary to successfully operate the store within the guidelines of policies and procedures and the additional requirement of his/her supervisors. A typical workweek is 48 to 52 hours in shopping center stores and 45 hours per week minimum in downtown locations. The number of hours worked should be reported on the time sheet, exactly as worked. Any vacation, sick leave, bereavement or any other absences should have prior approval by the District Manager with supporting personnel status mailed to the Personnel Department. Store Manager should submit monthly and weekly schedule to the District Manager in writing, mailed to the District Manager each week so that it is received no later than Saturday prior to the beginning of the workweek. Any deviation from this schedule should have prior approval of the District Manager. Essential Functions 1) To maintain an outgoing and enthusiastic rapport with store customers, providing good service and all possible assistance. 2) To successfully complete the Management Training Program. 3) To employ and properly train a qualified Assistant Manager, with the advice and approval of the District Manager. 4) Employment and training other store personnel with the assistance of Assistant manager and the advice and approval of District Manager. 5) To obtain the advice of your District Manager on any personnel or operational problems or opportunities. In the absence of the District Manager, you would consult with the Regional Vice-President. In the absence of the District Manager and Regional Vice-President, you will contact the Senior Vice-President of Store Operations. 6) Control of inventory shrinkage to within 2.5% of annual sales. Any inventory shrinkage of over 3.5%, two consecutive, or with 5% or more will result in disciplinary action up to and possibly including termination. 7) To maintain a Shrink Check Test score of 80 or above. Any Shrink check Test below 80 will result in disciplinary action up to and possible including termination. 8) Enforcement of Company Safety Policies. 9) To maintain a good relationship with all area law enforcement agencies and to continually solicit their assistance in security matters concerning the store. 10) To complete/approve/supervise weekly schedule for all store personnel and to operate the store within the assigned payroll budget with the assistance of the Assistant Manager. To notify the District Manager of any problems with the payroll budget. 11) To assign duties and properly train all employees to properly perform their assignments according to company procedure. 12) To inform all employees of company policies and procedures and to effectively enforce these same policy/procedures at all times. To recognize the fact that as manager, you are responsible for all employees adherence to company policies, including but not limited to Store Work and Disciplinary Policies. 13) To transmit/report payroll information accurately and in a timely manner per policy. 14) By using authorized company procedures to maintain a well-balanced and in-stock merchandise inventory, to include seasonal merchandise distribution. 15) To maintain good standards of cleanliness throughout all areas of the store. 16) To maintain clean and organized merchandise displays in all departments. 17) To maintain well organized office and stock room areas. 18) Responsible for maintaining store operating hours based on direction from Senior Management at Corporate Office. 19) To verify all receipts of merchandise according to company policy and procedures, reporting any overages/shortages per company procedure. 20) To supervise the pricing of all merchandise according to company procedure. 21) To keep the District Manager/RVP informed of: a. Any defective merchandise received. b. Fast and slow sellers. c. Problems with direct vendor shipments. 22) Total responsibility for the store cash fund and sales receipts. To insure that all cash handling and cash security procedures are enforced. 23) To insure that all reports, records, and inventories are completed accurately and according to company policy and procedure. 24) To keep the District Manager informed of all problems or opportunities, actual or threatened with store equipment or the building structure. 25) To notify in advance your District manager of your absence from the store during normal scheduled work hours. 26) To maintain the confidentiality of all store sales, records, or any other company information. 27) To receive approval of the District Manager for all expenditures over $50.00. 28) To work designated hours as required by the District Manager. 29) To perform any other jobs or duties that may be required or assigned to you. 30) Responsible for implementation of company programs with accuracy and timeliness in order to maximize associate and/or customer benefits. Examples of programs are, but not limited to: incentive plans, sales promotions, and merchandise programs. 31) Project positive leadership a. Appearance b. Professionalism c. Communication Skills d. Knowledge e. Judgment f. Objectivity g. Morale of store employees 32) To handle count bulletins, markdowns, on-hand requests with accuracy in a timely manner. 33) To update on hand of merchandise on a regular basis to ensure accuracy of inventory levels. 34) To call in deposit information on a daily basis as required by corporate. 35) Ordering merchandise weekly to maintain in-stock and maximize sales. Authority 1) To hire store personnel as per company policy with approval of District Manager. 2) To terminate store personnel after reviewing and receiving approval of the District Manager or Regional Operations Manager/Field Human Resources Manager. 3) Conduct annual performance reviews and request pay adjustments to District Managers. 4) To use good judgment in authorizing refund or exchanges which do not specifically meet the standards of company policy governing that transaction and taking this action with the intent that helping the customer would be in the best interest of the company. 5) Using good judgment while enforcing the policy and procedure, handling layaways, credit cards, checks, and cash transactions. Qualifications and Skills Required ü High School Diploma or GED ü 3+ years of related experience in store management ü Ability to effectively communicate in English ü Strong planning, coaching, analytical and communication skills ü Strong written and verbal communication skills ü Team-oriented work style Working Conditions ü Retail store environment where extended periods of standing are required ü Ability to regularly lift up to 50lbs from floor level to above shoulder height; must be able to meet demands of frequent walking, standing, stooping, kneeling, climbing, pushing, pulling, twisting, and repetitive lifting, with or without reasonable accommodation ü Retail store stockroom environment subject to fluctuations in temperature ü Occasional lifting and maneuvering of merchandise and displays ü Frequent lifting and maneuvering of merchandise and displays ü Exposure to dust and extreme temperatures while unloading trailers ü Scheduled work hours may vary, to include evenings and weekends ü Occasional use of ladders required Education Equivalency ü AS/AA degree plus 2 years of related experience

Job Description PDS 5 / Power Delivery Substation Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full service engineering, procurement, & construction management firm covering power, defense, aerospace, industrial, commercial and municipal entities. We specialize in power generation and delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! Mesa seeks a motivated Substation Physical Group Lead to manage a physical design team working on projects for a client with a growing workload. Position requires approximately 70% project work and 30% management. Responsibilities include monitoring budget and schedule, assigning resources to a project, communication and collaboration with the client's project managers and project engineers, collaborating and mentoring with design team, collaborating and working with other design teams. • Lead and mentor a team to complete physical substation design projects., • Possess a thorough understanding of high voltage transmission substation outdoor equipment., • Willing to learn the Client’s standards and practices., • Ability to identify, analyze, and solve technical problems related to substation design., • Ability to work independently with direction, while not hesitating to ask questions when needed., • Possess aptitude for developing a strong working relationship with Senior Management, Program Manager, Project Manager, Group Leads, and Design Staff., • Possess aptitude for developing a strong working relationship with the Client., • Possess excellent verbal and written communication skills., • Possess willingness to develop, promote, and comply with Mesa quality requirements., • Possess willingness to develop, promote, and comply with Mesa safety requirements., • Possess working knowledge of computers and software such as AutoCAD, Microsoft Office Suite, and software used for specific technical applications within the group. Responsibilities • Establish work assignments and review performance to ensure the efficient, cost-effective utilization of staff., • Establish, promote, and assure quality on all projects and work performed by the group., • Attend client joint project team, site visit, and scoping meetings for projects., • Prepare project estimates and assist in the preparation of bid packages., • Monitor project execution and schedule to ensure satisfactory performance., • Perform technical oversight and coordinate checking/review of deliverables and other project documents., • Maintain good quality and efficiency while managing a team that develops deliverables such as: General Arrangements, Equipment Plans, Elevations, Sections, Control House Layouts, Grounding analysis/design, Switchgear design, Conduit and Cable design, Creation of Bills of Material, etc., utilizing AutoCAD., • Follow up on construction issues with design staff to resolve problems and concerns in a timely manner., • Determine staffing needs to meet present and forecasted workload, help identify and evaluate potential candidates for open positions, assist with interviews and evaluation of candidates, and make hiring recommendations., • Identify training needs for staff, and budget, plan, coordinate and conduct training as required., • Conduct group meetings with team to communicate company and business unit objectives as required., • Promote a strong safety culture within the group and ensure staff incorporates safe work practices into all activities., • Approve time sheets and authorize overtime, vacation, and indirect/overhead activities., • Work with Senior Management to identify methods to improve project execution, work processes, and procedures to continually improve quality, productivity, and efficiency., • Foster strong customer relationships through communications and support., • Use good verbal and written communication skills with team members and clients., • Use good interpersonal skills to build relationships with team members and clients., • Complete assignments within budget and schedule with a high degree of accuracy to provide quality deliverables., • Mentor other designers/engineers in the group to increase knowledge of physical substation design., • Check/review other personnel work for accuracy and adherence to client/national standards., • Independently evaluate, select, and apply engineering principles and practices relevant to the project requirements. Share updates with team and leads to continually improve communications and quality., • Work with other Group Leads and the Program Manager to identify potential areas of engineering process and/or procedure improvements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Job Title: Civil Engineer (Project Manager) Location: Knoxville, TN Type: Direct Hire Work Model: Onsite – onsite Responsibilities • Manage site development and civil engineering projects from proposal through construction, including oversight of scope, schedule, and budget., • Lead the design and review of site layout, grading, stormwater systems, utilities, and erosion control., • Prepare and oversee technical reports, plans, specifications, cost estimates, and permit applications., • Perform quality assurance/quality control reviews and ensure project deliverables meet regulatory and client requirements., • Coordinate and communicate with clients, contractors, subconsultants, and regulatory agencies throughout all phases of the project., • Mentor and supervise junior engineers and technical staff, including support for career development planning and performance reviews., • Collaborate with senior leadership on business development and strategic client growth initiatives. Requirements, • 10+ years of civil engineering experience in site development or infrastructure design, or a comparable combination of education and experience, • Bachelor’s degree in Civil Engineering or a related discipline; Master’s degree preferred, • Professional Engineer (P.E.) licensure, • Experience managing civil or site development projects from planning through completion, • Proficiency in AutoCAD Civil 3D and stormwater modeling tools; experience with HydroCAD or HEC-RAS preferred, • Experience developing project scopes, preparing proposals, and managing projects profitably, • Experience resolving design and permitting challenges related to grading, stormwater, and utility layouts, • Familiarity with local and state permitting processes and coordination with regulatory agencies, • Strong written and verbal communication skills for collaboration across teams and with external stakeholders, • Experience mentoring junior staff and providing leadership within project teams System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 #LI-NP1 Ref: #193-Precision Oakridge

Job Description PDS 5 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation Physical Engineering Associate I to be responsible for the design of deliverables associated with a high voltage substation. This typically includes, but is not limited to: general arrangement, sectionviews, grounding, conduit layouts, bills of materials, and cable schedules, as well as construction turnover documentation. • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description GIG Integrated Water Resource Management / Generation Industrial and Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Mesa seeks an experienced project manager that is capable of leading and supporting projects across a wide variety of civil, environmental, and water resources engineering applications, including Hydrology & Hydraulic analysis and modeling, hydropower and Pumped Storage Hydro (PSH) system analysis, precipitation/flood hazard safety review, and critical infrastructure assessment. This person will follow an in-office or hybrid schedule at our Knoxville location. What We’re Looking for Bachelor or Master of Science 6-8 years of experience in hydrologic and hydraulic (H&H) modeling, water resources engineering, environmental and economic data analysis, and project management, project lifecycle (initiation through closeout). Engineering-In-Training Certificate, preferably P.E. • Ability to perform broad range of supervisory responsibilities over Project Engineers and Engineers., • Possess strong verbal and written communications skills., • Ability to coordinate with and interface with clients, vendors, engineers, colleagues, and other electric utilities personnel., • Possesses strong interpersonal skills to build relationships and work effectively with clients, peers, and affiliates., • Strong skills in Microsoft Word, Excel, PowerPoint, Outlook, scheduling software and possesses working software Hydrology & Hydraulics modeling knowledge such as: HEC-HMS, HEC-RAS, FLO-2D. Some knowledge in project management software and corporate accounting practices and business operations., • Possess willingness to develop, promote and comply with Mesa safety requirements., • Possesses ability to understand and implement new processes/procedures regarding Project, Program and Portfolio management., • Willingness to acquire knowledge about the Project Management Institute (PMI’s) standard for Organizational Project Management (OPM). What You’ll Do General: • Works under the direction of Senior Management (e.g., Director, Vice President)., • Communicates effectively with client stakeholders on a regular basis including keeping clients informed of issues that could adversely affect project execution across various management areas and/or phases of the project lifecycle, • Coordinate/Communicate with Peers – Must be able to effectively integrate and work in a team environment. Project Delivery: • Will work to manage and coordinate multiple and simultaneous project efforts and business initiatives in a programmatic way., • Must be able to manage to the task at hand while maintaining vision and direction towards the larger goal. Business Development: • Proactively communicates and promotes Mesa capabilities/strengths to new and existing customers., • Interfacing with potential or existing clients, listens for and seeks out new projects that may exist or are being formulated., • Maintain relationships with existing or potential clients., • Meets regularly with key clients to discuss current/future projects, evaluate Mesa performance, and identify other business opportunities either with current clients or through referrals., • Provides management and leadership support by leveraging project selection and execution success to achieve strategic objectives. What You’ll Earn • Paid Time Off, • Holiday Pay – 10 Days Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings plan, • 401(K) Matching Contribution, • Section 125/Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Option Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Driller Requisition Number: 2026-2190-04 S&ME is looking for someone who enjoys working outdoors and takes pride in hands-on work that is hard-working and reliable as a full-time Driller to join our Field Exploration team in Knoxville, Tennessee. As a Driller, you'll lead and coordinate drilling operations with minimal supervision from the operations manager or senior driller. You'll oversee and mentor a team of driller assistants and drillers, ensuring the use of the best drilling techniques and equipment for each project. Your responsibilities will include mobilizing drill equipment, ordering project materials (with management approval), and maintaining, cleaning, and calibrating testing and inspection equipment. We value safety, quality workmanship, and integrity. If you're dependable, enjoy working outdoors year-round, and are open to traveling (with paid hotels and per diem), we want you on our team! Your Day-to-Day: • Drilling Operations: Manage operations for assigned projects by overseeing lower-level drillers., • Field Sampling: Review field logs, samples, and data from subordinate drill personnel and communicate with management and technical staff., • Equipment Maintenance: Oversee vehicle and equipment maintenance to ensure good working conditions and determine the need for equipment., • Quality: Assure that all drilling functions, including quality control, quality assurance, and verification, are performed per the standard drilling methods, project specifications, and other contract documents., • Coordination of Others: Coordinate and oversee the daily activities of assigned driller assistants on medium to large projects and communicate field conditions and job progress to management and professional staff daily. What You Bring: • High school diploma or GED, • Minimum of 3 years of Geotechnical and/or Environmental Drilling experience, • Certifications/Licensure:, • Commercial Driver's License (CDL), • valid Driller license, • Effective communication skills (speaking, reading, and writing) using the English language, • The understanding and ability to perform routine vehicle and equipment maintenance, • Competency in multiple drilling methods, which include hollow stem auger, mud rotary, and rock coring techniques Working Conditions and Physical Demands: This role involves hands-on work in outdoor environments, and with Company-provided Personal Protection Equipment (PPE). You'll need to be comfortable with: • Working outdoors in varying weather conditions, the majority of your time, • Walking over rough, uneven terrain and standing (potentially up to 12 hours a day), • Routinely lifting and carrying 40-50lbs (field/laboratory samples and equipment), • Maneuvering field equipment safely, such as a loaded wheelbarrow, on uneven ground around active construction sites, • Working outside of normal business hours and traveling (typically out-of-town and/or overnight) as project needs arise This role is not for those seeking a climate-controlled workspace, but it's incredibly rewarding for individuals who enjoy being hands-on, traveling, solving problems, and seeing projects take shape from the ground up. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of over 1,000 employee-owners across 10+ states collaborates to create a meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description Ardurra is seeking a Senior Water Resources Stream Designer to join our Watershed Practice!! As a trusted leader in providing reliable and innovative stormwater solutions across the Southeast. We offer tailored and cost-effective approaches to protect public safety, improve watershed functions, and enhance quality of life. As advisors to municipal clients, we guide communities in developing sustainable stormwater programs. Our expertise includes watershed planning, asset management, NPDES permitting, water quality and quantity control, and capital design projects. Primary Function: The Water Resources Stream Designer is responsible for designing stream restoration and stabilization projects that improve watershed health, restore natural hydrology, protect utilities, and support ecological balance. You'll work closely with engineers, ecologists, and planners to develop sustainable solutions for urban stream systems across a variety of landscapes. Under general mentorship and guidance, the role may also provide direction to junior engineers on various projects that focus on managing runoff, preventing flooding, and protecting water quality. Primary Duties: • Design stream restoration, stabilization, and enhancement projects using geomorphic and ecological principles., • Perform hydrologic and hydraulic modeling using software such as SWMM, HEC-RAS, AutoCAD Civil 3D, and GIS tools., • Prepare construction documents including plan sets, grading plans, erosion/sediment control plans, and technical specifications., • Conduct site evaluations and assist in environmental impact assessments., • Collaborate with senior engineers and multidisciplinary teams to develop innovative watershed planning and stormwater management solutions., • Assist in field inspections, data collection, and site assessments., • Participate in public outreach, stakeholder engagement, and project presentations as needed Education and Experience Requirements: • Bachelors in Civil, Environmental Engineering, Landscape Architecture or related disciplines., • Approximately 8 or more years of experience in water resources and stream restoration or stabilization., • Exposure to stormwater modeling software (HEC-RAS, SWMM, HydroCAD), AutoCAD Civil 3D, and GIS applications is a plus., • PE certification (or ability to obtain within one year) is preferred but not required Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-SC1

Job Description Blue Diamond Attachments is seeking a high-energy, results-driven Integrated Marketing Manager to lead strategic marketing initiatives that drive dealer engagement, product launches, demand generation, and business growth. We are looking for a marketing leader who thrives on driving execution, influencing cross-functional teams, and turning strategic priorities into measurable results. The ideal candidate is equally comfortable leading campaign discussions, coordinating with agency partners, collaborating with sales and product teams, and executing initiatives hands-on. Reporting to the Senior Director of Marketing & Product, this role oversees marketing events and serves as the primary relationship manager for our external advertising agency partner. You will also work closely with the Digital Marketing Manager to align campaign strategy, digital execution, lead generation, and performance optimization across dealer and end-user audiences. What You’ll Own Integrated Campaign Leadership: Lead the planning, coordination, and execution of integrated marketing campaigns supporting product launches, seasonal sales initiatives, dealer engagement programs, demand generation, customer retention and brand awareness. You will move initiatives from concept to execution while ensuring timelines, messaging, and deliverables stay on track. Cross-Functional Leadership: Partner closely with Sales, Product Management, Customer Support, Digital Marketing, and Agency partners. You will help align messaging, launch readiness, campaign priorities, and customer engagement efforts across the organization. Go-To-Market Execution: Drive launch execution for new products and attachment solutions through campaign planning, dealer communication, sales enablement tools, launch assessments, customer-facing messaging. Content and Brand Execution: Lead development and deployment of campaign messaging, dealer toolkits, product launch materials, brochures, email campaigns, case studies, and event support materials. Help translate technical product capabilities into compelling customer-facing value propositions. What We’re Looking For • 7+ years of experience in integrated marketing, campaign management, or go-to-market execution, • Experience leading projects, campaigns, or direct reports, • Strong communication and project leadership skills, • Ability to balance strategy with execution, • Comfortable operating in a fast-paced, collaborative environment, • Experience working with agencies and cross-functional teams, • Strong organizational skills and attention to detail, • Ability to influence and drive initiatives forward Preferred: • Manufacturing, construction, industrial, heavy equipment, or dealer/distribution experience, • HubSpot and Salesforce experience, • Experience supporting dealer networks or B2B channels Why Blue Diamond? • Competitive salary plus monthly profit-sharing bonuses that reward team success, • Comprehensive benefits package including health insurance, vacation pay, and more, • Growth and advancement opportunities within a fast-paced, high-growth company, • Team-focused culture built on Integrity, Commitment, Accountability, Compassion, Growth, and Positivity, • Opportunity to make a meaningful impact through operational support, process improvement, and team development If you are energized by ownership, execution, collaboration, and building marketing initiatives that drive measurable business results, we would love to hear from you. Tennessee Drug-free Workplace | E-verify employer Company DescriptionBlue Diamond Attachments is a unique company. We are a family-owned and operated company based in Knoxville, TN. We are a big company that runs on southern family values, yet we are the leader in the compact equipment attachment industry with thousands of dealers representing us worldwide. We have been built from the ground up on strong American values and a strong work ethic. Blue Diamond Attachments has a strong reputation for quality and impeccable service in our industry. We have taken a very proactive approach to our business where we are anticipating consumer needs and creating solutions accordingly. We have built our reputation on quality, dependability, and integrity.Blue Diamond Attachments is a unique company. We are a family-owned and operated company based in Knoxville, TN. We are a big company that runs on southern family values, yet we are the leader in the compact equipment attachment industry with thousands of dealers representing us worldwide. We have been built from the ground up on strong American values and a strong work ethic. Blue Diamond Attachments has a strong reputation for quality and impeccable service in our industry. We have taken a very proactive approach to our business where we are anticipating consumer needs and creating solutions accordingly. We have built our reputation on quality, dependability, and integrity.

Job Description Cannon & Cannon, Inc. (An Ardurra Company) is seeking a Senior Traffic Engineer/Project Manager in our Knoxville, TN office! We are seeking a Senior Engineer/Project Manager with strong experience in traffic engineering and transportation planning to lead a variety of local and DOT projects. This role will oversee traffic planning / operational studies and traffic design, including signalization, roadway lighting, signing and pavement marking, temporary traffic control, and ITS. The ideal candidate will be a collaborative leader, mentor junior staff, and work closely with clients and stakeholders to deliver high-quality, context-sensitive solutions. Primary Function: You’ll lead, plan, budget, and deliver traffic engineering projects, including traffic studies, signal design, ITS design, signing and pavement marking, and construction traffic control plans. You will manage multidisciplinary teams and serve as the primary point of contact for clients and agency partners. Primary Duties: • Lead traffic engineering planning and design tasks across multiple projects., • Manage project scope, schedule, budget, and client communications., • Conduct investigations and inspections of proposed and existing site conditions, roadways, intersections, signage, signals, pavement markings, and transportation corridors to determine conformance with applicable rules and standards., • Oversee the design of traffic control devices including quantities, cost estimates, and specifications for transportation construction bid packages for federal, state, and local agencies., • Perform and review traffic operational and safety analyses., • Prepare and present technical reports and findings to clients, agencies, and the public., • Mentor junior engineers and support staff, fostering technical growth and collaboration. Education and Experience Requirements: • Bachelor’s degree in Civil or Transportation Engineering or related field., • Professional Engineer (PE) license, or PTOE preferred., • 10+ years of post-licensure experience in traffic and transportation engineering., • Proven experience managing transportation projects and leading design teams., • Strong understanding of traffic engineering principles, standards, and software tools (e.g., Synchro, VISSIM, AutoCAD, MicroStation)., • Excellent communication skills and ability to present complex technical information clearly., • Experience working with federal, state, and local transportation agencies. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; and provide the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Mechanical Engineer IV focuses on the design and engineering of HVAC and mechanical utilities for buildings. The individual possesses demonstrated ability to manage multiple complex tasks, establish priorities and direct the work of others. This position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on all project phases, sizes and levels of complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers. Typical tasks and deliverables that are executed by or under the supervision of the Mechanical Engineer IV include site selection, master planning, commissioning and startup, load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, HAZOP reviews, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners. Project work includes directing design activities for all levels of design such as studies, conceptual and schematic design, design development, construction documentation and construction administration. The Mechanical Engineer IV understands the development and field implementation of documents through all project phases, sizes and levels of complexity. Within this role there are multiple positions, and their focuses are described below. Core Activities • Interfaces with client and external partners., • Works closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design., • Works with a Project Manager on proposal development, designs task identification, man-hour planning and project scheduling for the mechanical scope of work on projects., • Conducts and leads field surveys of existing conditions and support of field reporting., • Identifies and resolves intermediate non-compliant existing conditions during site walks and construction field surveys., • Develops narratives, reports and construction drawing packages and writes construction specifications on large projects of advanced complexity with no oversight., • Provides lead and advanced support of construction activities such as RFI responses, submittal reviews, punch list development and construction progress reports., • Conducts quality checking of documents for intermediate complex projects (e.g., technical verification of design calculations and documentation) and drives overall project quality., • Utilizes various platforms to execute work, such as Microsoft Office products and available BIM software., • Provides mentorship to less experienced Mechanical Engineers and/or Designers., • Leads advanced project system design programming and master planning with support from Senior Engineer., • Leads a team of mechanical staff in the execution of advanced projects discipline design and engineeringQualifications Minimum Qualifications • ABET-accredited Bachelor’s degree in Mechanical Engineering or Architectural Engineering (with a mechanical focus), • Minimum of 10 years of experience, • Professional Engineer registration in good standing, • Advanced experience with performing engineering calculations, and developing and implementing HVAC, mechanical utility and piping systems designs, • Advanced experience with using and applying the mechanical/plumbing/fire/building code Preferred Qualifications • Life Sciences (Pharmaceutical, Biotech, Laboratory) or Food & Beverage industry experience, • Advanced knowledge of GMP manufacturing environments, • Proficiency in Revit and AutoCAD, • Proficiency in Microsoft Office suite, • LEED, WELL or other sustainable design accredited professional or, experience with sustainable design, • Intermediate experience with using and applying other applicable industry standards (ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, OSHA, etc.), • Advanced experience conducting and leading field surveys of existing conditions and support of field reporting, • Advanced experience in plumbing design, • Basic experience using Revit plugins such as Enscape and Unifi, • Basic experience building parametric workflows using Dynamo, Grasshopper, and/or Rhino within Revit, • Proficient with advanced internal and external cross-discipline project team coordination, • Proficient with advanced coordination with construction trade partners, vendors and manufacturers, • Intermediate experience with troubleshooting issues with mechanical systems, • Ability to develop intermediate internal mechanical design and engineering training presentations, • Ability to travel for client development and project execution, and internal and external training opportunities Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description PDS 5 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation Physical Engineering Associate II to be responsible for the design of deliverables associated with a high voltage substation. This typically includes, but is not limited to: general arrangement, sectionviews, grounding, conduit layouts, bills of materials, and cable schedules, as well as construction turnover documentation. • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description BB&E is a full service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both federal and private sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to our clients. Position Summary BB&E is currently looking for an experienced, self-motivated, and detail-oriented Environmental Project Manager (PM) to support our federal clients. The PM will work directly with existing staff to ensure high-quality/successful planning, execution, and completion of various projects within financial and schedule expectations. The PM will directly support and report to our Program Managers on all aspects of project delivery, including but not limited to: project planning (such as document preparation, subcontractor procurement, scheduling, coordination), management of field investigation and remediation activities, reporting, client interfacing, and project and financial tracking. The role requires deep, hands-on technical experience that goes beyond basic project implementation and oversight, and the ability to independently identify and address technical deficiencies of CERCLA investigation and remediation work. This position is based in Northville, MI; Atlanta, GA; Knoxville, TN. Requirements • Support client management and development through excellent project delivery, • Track and manage multiple projects, including concurrent task and project management., • Perform assigned work in accordance with project schedules, plans, and budgets., • Review technical documents for detailed analysis of technical approach, implementability of proposed activities, compliance with federal, state, and local regulations, and the ability of the approach to meet project objectives., • Develop project plans for clients (e.g., Five Year Reviews, Remedial Process Optimization Reports, Sampling and Analysis Plans, etc.)., • Critically review contractor work performance, both in the field and in the office, to identify technical deficiencies, recommendations for corrective action, and work plan/UFP-QAPP deviations., • Provide site investigation support throughout the entirety of the CERCLA process, including preliminary assessments, site inspections, remedial investigations, feasibility studies, remedial designs, remedial action completion reports, EE/CAs, and TCRAs/NTCRAs., • Possess extensive experience with, and the ability to train and/or supervise staff in field sampling activities including soil, sediment, surface water, soil gas/vapor, and groundwater sampling; monitoring well installation; drilling methodologies including HSA, sonic drilling techniques, and DPT; specialized field investigation methods including HPT/HRSC and Vertical Aquifer Sampling; PFAS sampling, characterization, and remediation; and remediation system approaches, design/installation, system reviews, and O&M evaluations., • Work with technical, Proposal Management, and Business Development staff to support proposal development., • Lead, mentor, and train junior- and mid-level staff to maximize project execution and prepare staff for larger roles within the company., • Work with the Leadership Team, Senior Management Team, and staff to ensure BB&E Core Values are upheld., • Travel up to 30% of the time. Key Qualifications • Strong attention to detail., • Experience with Department of Defense (DoD) environmental programs, including the Defense Environmental Restoration Program, and familiarity with DoD/AF policies and procedures., • Proven ability to oversee multiple projects simultaneously while working effectively with clients and project teams to successfully execute project scope in accordance with client expectations and financial/schedule metrics., • Ability to problem-solve and function as a member of a studies/remediation Community of Practice., • Technical writing experience, including the ability to document meeting discussions and prepare meeting minutes., • Experience managing and executing multi-media investigations involving soil, sediment, surface water, pore water, groundwater, soil gas, and indoor air., • Familiarity with various drilling methods, including direct-push technology, hollow-stem auger, sonic, rock coring, and air/mud rotary., • Experience managing and supporting investigations involving contaminants including metals, volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs), polycyclic aromatic hydrocarbons (PAHs), and per- and polyfluoroalkyl substances (PFAS)., • Experience with environmental restoration activities performed under the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA)., • Strong communication skills, including the ability to effectively convey complex technical concepts to diverse audiences during regulatory meetings, public meetings, and other stakeholder interactions., • Proficiency with Microsoft Office applications including Excel, Word, and PowerPoint., • Highly motivated self-starter with the ability to manage multiple tasks and deadlines autonomously. Experience, Certification, and Education • Experience: 10-20 years’ experience as an environmental professional, at a minimum, the last five in consulting industry., • Previous project management experience with federal clients is required., • Certification and Training: 40-hour HAZWOPER certification is required; GIT/PG or EIT/PE is preferred; OSHA Supervisor Training is preferred; OSHA Construction and General Industry 30-Hour Training is preferred., • Education: A Bachelor’s degree or higher in Engineering or Geology (or related science), or other related areas is required. Physical Requirements • Physical Requirements: Must have the ability to: stand/walk/kneel/crouch and to remain in a stationary position at least 60% of the time; operate office equipment, including computer, copy machine, phone, etc.; use hands to finger, handle or feel objects or controls; reach with hands and arms; and lift up to 25 lbs. Must be able to travel to meet clients, attend conferences, and conduct site visits., • This role is fully on-site and requires working from our Northville, MI, San Antonio, TX , Atlanta, GA or Knoxville, TN office when not traveling. Work Environment • Must be comfortable working both indoors and outdoors, with exposure to varying weather conditions; occasionally required to navigate rough terrain and operate at heights., • PPE & Safety: Required to wear personal protective equipment (PPE) as necessary, typically using gloves, hard hat, hearing protection, and steel toe boots; may encounter hazards or contaminants during work tasks., • Be able to thrive in BB&E’s highly collaborative environment and team culture. Benefits • Competitive compensation packages, • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Financial wellness resources, • Employee discounts, • Employee Assistance Program (EAP), • Pet insurance discount *Applies only to full-time employees BB&E is an Equal Opportunity Employer and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description PDS 10 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation Physical Engineering Associate to be responsible for the design of deliverables associated with a high voltage substation. This typically includes, but is not limited to: general arrangement, sectionviews, grounding, conduit layouts, bills of materials, and cable schedules, as well as construction turnover documentation. • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Benefits • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Salary Range $69,264.32-$80,133.11 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Ardurra is looking to hire an experienced Senior Water/Wastewater Engineer to join our team in our Knoxville, TN office. Our innovative water and wastewater engineers collaborate closely with clients to plan, design, permit, and construct systems that address their needs comprehensively. This approach allows our clients to make smarter investments, resulting in lower life cycle costs and additional benefits. As a recognized leader in the water industry, our projects encompass treatment and infrastructure initiatives for municipal and institutional clients. Our work ranges from drinking water supply to water reuse and wastewater management. We have the capability to support projects of all sizes within a flexible and innovative team environment. Primary Function: The role includes providing technical expertise in the design, management, and optimization of water and wastewater projects. You will be responsible for technical leadership and supporting strategic direction for a wide variety of water and wastewater treatment and infrastructure projects, performing or overseeing the technical design and hydraulic modeling requirements. Primary Duties: • Develop detailed designs, plans, specifications, reports and cost estimates for treatment plants, pipelines, pump stations, tanks and other water/wastewater storage and conveyance systems., • More specific responsibilities include performing or managing engineering/process design, hydraulics, pumping systems, and treatment process projects., • Ability to coordinate with the multiple departments and sub-consultants required for multi-discipline projects., • Ability to research and utilize available resources., • Candidate must be self-motivated and able to lead or assist a project team in completing multiple projects simultaneously., • Effectively communicate, in English, both verbally and in writing., • Gathers data for engineering analyses through phone contacts, written correspondence, and research sources., • Perform calculations and research in support of designs using engineering formulas and skills in formulating possible results based on different scenarios., • Prepare engineering reports, opinions and recommendations., • Maintain completed project files and proper document control., • Prepare design drawings, technical specifications, material quantity take-offs and develop construction cost estimates for projects., • Provide other duties as may be assigned by the Project Managers/Task Leads to support project team. Education and Experience Requirements: • Bachelors degree in Civil Engineering or related field required, • 8+ years of experience within water/wastewater engineering, • Professional Engineer (PE) license required, • Strong interpersonal and customer service skills, • Strong written and verbal communication skills, • Excellent time management skills with a proven ability to meet deadlines, • Excellent analytical and problem-solving skills, • Ability to prioritize tasks and to delegate them when appropriate Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HM1

Job Description Cannon & Cannon, Inc. (An Ardurra Company) is seeking a Senior Transportation/Roadway Engineer in our Knoxville, TN office! We are looking for an engineer with interest and experience in roadway and sidewalk/greenway design to support a wide range of local transportation and DOT projects. Projects will include but are not limited to minor and major/complex roadways and multimodal facilities and will offer the opportunity to mentor and guide junior staff and be mentored by some of the top local experts in the transportation industry. Primary Function: This is an opportunity to play an important role delivering a variety of transportation related design projects, developing contract plans, specifications, and estimates for construction. This role will support the entire project design delivery process and will be responsible for leading engineering design tasks pertaining to roadway geometric design, production of plans, and writing of technical reports and documents. Primary Duties: • Performs process design of multi-discipline transportation engineering projects, including evaluating alternatives, conducting engineering studies and design calculations, and performing preliminary and detailed design, • Provide technical expertise to ensure compliance with design intent, project scope, and state and federal design criteria and standards, • Develops contract plans and prepares technical specifications and cost estimates, • Assists with project execution and delivery including development of project scope, budget, and schedule, • Responsible for the day-to-day activities and coordination of engineers, designers, and technicians as assigned to a specific project, • Perform quality control on engineering work products including design calculations, models, drawings, reports, specifications, and estimates, • Assist with marketing and business development efforts, • Effectively communicate/coordinate with internal and external partners/stakeholders including clients, discipline leads, sub consultants, regulatory agencies, and utility companies Education and Experience Requirements: • Bachelor's degree in Civil or Transportation Engineering or related field, • Professional Engineer (PE) license, • 10+ years of post-licensure engineering experience in transportation/roadway design, • Proficient in MicroStation and OpenRoads Designer with the ability to train and supervise the technical work of engineers, designers, and technicians, • Proficient in MS Office Suite programs (Word, Excel, PowerPoint, Project), • Experience preparing final design plans, specifications, and estimates, • Strong verbal communication and technical writing skills, • Strong analytical problem-solving, time management and organizational skills Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; and provide the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job Description GIG South / Generation Industrial & Government The Senior Protection Relay Engineer candidate should have experience with the utility, industrial, or power generation industries and be capable of leading teams for both small and large power generation design projects as well as acting in the owner’s engineer role. The ideal candidate will have extensive experience in power generation and distribution, protective relaying systems, and power system studies. In addition, the candidate will be expected to mentor young engineers, support in managing client relationships, and lead technical proposal efforts in support of the project manager. A significant level of design and engineer of record work experience with power plant systems is required. Qualifications • Bachelor’s Degree in Electrical Engineering, • Minimum 8 years experience in protection relay system design, settings, and installation., • Design experience with coal, hydro, simple cycle and combined cycle power plants., • Previous experience with an engineering power consulting or EPC firm desired., • Experience with power systems analysis software like ETAP/SKM a plus., • Field installation and testing (using a Doble or similar) of relays a plus., • Candidate must have excellent communication, written and organizational skills., • Strong leadership skills with the ability to work independently, as a lead on a multi-discipline consulting team, or as a lead on a small team are required., • Extensive knowledge of three-phase electrical power, relay protection and control design are desired. Should be familiar with SEL, Basler, Beckwith, etc., • Knowledge and application of NERC-PRC standards and other commonly utilized industry standards., • Work with Project Manager and Project Controller on project reviews with management as needed., • Direct the activities of other engineering professionals and act as a mentor to other staff members as needed., • Delegating, planning, prioritizing and reviewing the work of other engineers., • Position will include an expectation of less than 15% travel for on-site meetings with clients and vendors as well as project site visits to investigate site conditions or in support of proposal efforts. Position Location The selected candidate is ideally located, or willing to relocate to the following locations: Knoxville, TN; Chattanooga, TN; Nashville, TN, Atlanta, GA; Hybrid/Remote eligibility dependent on candidate This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Notice to External Search Firms:Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job DescriptionAre we the road to your future? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. We are currently searching for an experienced Senior Roadway Engineer/Project Manager to support our Gulf Region located in Mississippi and/or Tennessee. Candidates should be based in or open to relocating to Mississippi or Tennessee. What you’ll be doing: • Provide plan review and project management for DOT and local municipal projects, • Coordinate project activities, schedules, and reporting for assigned work, • Prepare, issue, and track project documentation, including contracts, change orders, and client approvals, • Develop correspondence and documentation for clients, vendors, and regulatory agencies, • Support project financial processes, including invoices and purchase orders, • Prepare and edit meeting minutes, reports, and presentations, • Assist with project submittals and bidding activities, • Provide technical and administrative support to the project team, • Support client relationships and contribute to business development with local municipalities What you need to have: • BS in Civil Engineering from an accredited four-year college or university, • 10+ years of experience in roadway design, • Previous DOT experience, • Professional Engineer (PE) license, • Proven ability to meet DOT standards, schedules, and budgets, • Proficiency in OpenRoads (Geopak experience preferred), • Strong knowledge of DOT design methods, standards, and specifications, • Demonstrated experience managing medium to large, multi-office, or concurrent projectsAbility to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • Proven leadership, mentoring, and client management experience Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Mississippi MS Tennessee TN #LI-SD1

Job Description PYA is seeking a Consulting Senior Manager focused on Forensic Services to join its high-performing and privately-owned firm with a dynamic culture and a strong national reputation. This individual will join PYA’s collaborative Consulting Department which serves clients in all 50 states. RESPONSIBILITIES • Manage forensic accounting projects for PYA clients, evaluating the following:, • Assess potential fraud risks, • Propose effective investigative strategies, • Convey complex financial information clearly and concisely, both verbally and in writing to PYA clients, • Provide assistance with litigation support matters as needed, • Develop and present quality work products, • Serve clients as a trusted advisor, develop and maintain strong relationships, understand their needs, and provide tailored solutions, • Lead a team of consultants, fostering an environment of continuous improvement and professional growth, • Assist in business development initiatives through development and expansion of client relationships, utilization of professional networks, and participation in business and industry organizations QUALIFICATIONS • 7+ years of accounting, auditing, or financial investigation experience at a professional services and/or consulting firm preferred, • Certified Public Accountant (CPA), Certified Fraud Examiner (CFE), and/or Certified in Financial Forensic (CFF) required, • Experience with business valuation and litigation support a plus, • Proven project management skills, with a track record of successfully leading large-scale projects, managing timelines, and ensuring deliverables meet compliance and business objectives, • Demonstrated problem-solving skills, with a strong ability to translate complex data and compliance requirements into actionable business insights, • Exceptional communication and interpersonal skills, capable of effectively managing client relationships and leading diverse teams., • Ability to work irregular hours during investigations or legal proceedings About PYA: PYA, a leading independent professional services firm, serves clients across the United States with expertise in consulting, accounting, audit, tax, compliance, and business strategy. With offices in Knoxville, Atlanta, Tampa, Charlotte, Nashville, and Kansas City, PYA is committed to helping clients achieve their goals through innovative solutions and unparalleled service. PYA is also a member of HLB, the global accounting and advisory network, with affiliate firms in over 150 countries. Learn more about The PYA Way. Why PYA? • Be part of a dynamic and collaborative team that values innovation and excellence, • Work with industry leaders who are committed to professional growth and client success, • Competitive compensation, comprehensive benefits, and opportunities for career advancement

Job Description PDS 5 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Senior Substation P&C Engineer to be responsible for the upper tier design and/or checking of deliverables associated with a high voltage substation. This typically includes, but is not limited to: single line diagrams, control house layouts, panel front views, elementary and/or schematic diagrams, wiring diagrams, nameplate drawings, bills of materials, and cable schedules, as well as construction turnover documentation. • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Professional Engineer (PE) License required, with the ability to get a PE in the state of Kentucky, • Works under the direction of Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job DescriptionSalary: Company Overview: Arctiq is a global, intelligence-driven technology services company delivering professional and managed services across Hybrid Cloud Infrastructure, Networking & Connected Experiences, Cybersecurity, Data & AI, Autonomous Operations & Intelligence, and Enterprise Service Management. We help organizations operate, secure, and modernize complex environments by unifying infrastructure, networking, data, security, automation, and observability under a single, integrated operating model. Our work focuses on helping customers reduce operational friction, improve resilience, and make better, faster decisions as their environments evolve. Arctiq builds on decades of industry expertise and a customer-centric ethos to deliver exceptional value to clients across diverse industries. This is an on-site, full-time opportunity for one of Arctiqs clients in Knoxville, TN. Position Overview: Strategic Technology Advisors (STA) are responsible for building long-term trusted relationships with our clients, understanding their business needs, and providing a strategic technical vision through regular technology business reviews. Focusing on both the clients business and technology infrastructure, STAs provide digital transformation and technology guidance in alignment with platform of services, ensuring operational health, security, efficiency, and competitive advantage while helping clients to mitigate risk and increase productivity. Responsibilities: • Maintain strong client relationship, serve as trusted strategic advisor leveraging scheduled, ad-hoc, and C-Level meetings., • Develop and maintain a deep functional knowledge of customers goals, technical challenges, business objectives, critical infrastructure, and proactively mitigate risk within the environment., • Perform Technical Business Review (TBRs) meetings based on clients short- and long-term business needs, technology trends and present solutions in alignment with company's services and methodologies., • Perform trend analysis and leverage reports to drive data driven decisions, recommendations, operational improvements, for both the client and company., • Maintain technical competence by attending and participating in trainings, webinars, and certification courses., • Collaborate with internal technical teams regarding execution of advisory driven project planning., • Provide client-based feedback to company management on new needs not currently addressed within company's service catalog with a focus on continuous improvements and enhancements., • Forecasting opportunity (risk, profitability, prediction, etc.) on assigned accounts, • Assist with client facing budget forecasting, financial cost analysis reports and documentation., • Maintain a high customer satisfaction and renewal rate for assigned customers., • Other duties as assigned. Requirements: • At least five years of experience in a similar customer service, technical advisory, or IT Director/Manager oriented role., • Technically literate in cloud and on-premises enterprise network infrastructure, including end-user devices, virtualization, networking, wireless, backup & disaster recovery, and cybersecurity., • Business literate with basic to intermediate skills in strategy, budgeting, forecasting, and risk management, problem solving., • Proven ability to adapt to new technologies, situations, and environments and learn quickly., • Demonstrated presentation skills, including confidence and comfort over the phone and in front of audiences both small and large., • Exceptional interpersonal skills and ability to build relationships with senior-level executives as well as negotiate with and influence both internal and external decision makers., • Professional experience in relationship management, conflict resolution, and negotiation skills., • Strong leadership skills, acting as our clients trusted advisor., • Excellent written and oral communication skills, including client-facing presentation skills. Arctiq is an equal opportunity employer. If you need any accommodations or adjustments throughout the interview process and beyond, please let us know. We celebrate our inclusive work environment and welcome members of all backgrounds and perspectives to apply. We thank you foryour interest in joining the Arctiq team! While we welcome all applicants, only those who are selected for an interview will be contacted.

Job Description PDS 5 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation P&C Engineer Associate II to be responsible for the design and/or checking of deliverables associated with a high voltage substation. This typically includes, but is not limited to: single line diagrams, control house layouts, panel front views, elementary and/or schematic diagrams, wiring diagrams, nameplate drawings, bills of materials, and cable schedules, as well as construction turnover documentation • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 10 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation P&C Engineering Associate to be responsible for the design and/or checking of deliverables associated with a high voltage substation. This typically includes, but is not limited to: single line diagrams, control house layouts, panel front views, elementary and/or schematic diagrams, wiring diagrams, nameplate drawings, bills of materials, and cable schedules, as well as construction turnover documentation • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Benefits • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Salary Range $69,264.32-$80,133.11 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description GIG South / Generation Industrial & Government The Senior Electrical Power Engineer candidate should have experience within the utility or power generation or renewable energy industry and be capable of leading teams for both small and large power generation design projects as well as acting in the owner’s engineer role. The ideal candidate will have extensive experience in power generation and distribution, protection and motor control design, power system studies, construction and equipment specification development, and balance of plant designs such as raceway, lighting, and grounding systems. In addition, the candidate will be expected to mentor young engineers, support in managing client relationships, and lead technical proposal efforts in support of the project manager. A significant level of design and engineer of record work experience with power plant systems is required. Qualifications • Bachelor’s Degree in Electrical Engineering, • Minimum 8 years experience in electrical power generation design, • Design experience with coal, hydro, simple cycle and combined cycle power plants., • Previous experience with an engineering power consulting or EPC firm desired., • Experience with power systems analysis software like ETAP/SKM a plus., • Candidate must have excellent communication, written and organizational skills., • Strong leadership skills with the ability to work independently, as a lead on a multi-discipline consulting team, or as a lead on a small team are required., • Extensive knowledge of three-phase electrical power, relay protection and control design, system grounding, physical design, and experience with other activities such as lighting, arc flash, instrumentation, etc. are desired., • Work with Project Manager and Project Controller on project reviews with management as needed., • Direct the activities of other engineering professionals and act as a mentor to other staff members as needed., • Delegating, planning, prioritizing and reviewing the work of other engineers., • Position will include an expectation of less than 15% travel for on-site meetings with clients and vendors as well as project site visits to investigate site conditions or in support of proposal efforts. Position Location The selected candidate is ideally located, or willing to relocate to the following locations: Knoxville, TN; Chattanooga, TN; Nashville, TN, Atlanta, GA; Hybrid/Remote eligibility dependent on candidate This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Notice to External Search Firms:Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job DescriptionCompany Description CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Mechanical Engineer III focuses on the design and engineering of HVAC and mechanical utilities for new buildings, renovations/additions and processes. The individual possesses demonstrated ability to manage multiple complex tasks, establish priorities and direct the work of others. This position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on small to medium projects of intermediate complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers. Typical tasks and deliverables include load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners. Tasks will include utilizing software for building information modeling, computer-aided drafting and engineering calculations. Project work involves directing design activities for all levels of design such as studies, conceptual and schematic design, design development, construction documentation and construction administration. Location Preference: **We are open to providing relocation assistance for qualified candidates. This position operates in a hybrid work model, which requires the employee to live within a reasonable commuting distance of the Atlanta, GA location and report onsite as needed. Core Activities • Designs mechanical systems of intermediate complexity in conformance with code requirements and in coordination with other design disciplines., • Manages multiple complex tasks, establishes priorities and directs the work of others. The Engineer may work independently or at the direction of the Lead Engineer or Project Manager., • Works closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design., • Develops narratives, reports and construction drawing packages and writes construction specifications on projects of intermediate complexity and with little oversight., • Supports construction activities such as RFI responses, submittal reviews, punch list development and construction progress reports., • Plans and directs work and manages a project mechanical design budget on projects of intermediate complexity., • Supports proposal development under the supervision of a Lead or Senior Engineer., • Identifies design requirements, translates those requirements into scope, and documents the open issues, project decisions and actions required to consistently advance the design., • Identifies basic non-compliant existing conditions during site walks and construction field surveys., • Develops basic internal mechanical design and engineering training presentations., • Utilizes various platforms to execute work, such as Microsoft Office products and available BIM software., • Attends professional development activities., • Leads quality check efforts for projects of intermediate complexity and drives overall project quality., • Provides mentorship to less experienced Mechanical Engineers and/or Designers., • Leads systems design programming and master planning on intermediate projects with support from Design Lead or Senior Engineer., • May work on one or more projects simultaneously as directed by a Supervisor., • Acts as the Engineer-of-Record for small to medium projects when acting as Lead Mechanical Engineering RoleQualifications Minimum Qualifications • ABET-accredited Bachelor’s degree in Mechanical Engineering or Architectural Engineering (with a mechanical focus), • Minimum of 5 years of experience, • Professional Engineer registration in good standing, • Relevant AEC (Architecture, Engineering, Construction) firm experience, • Intermediate experience with performing engineering calculations, and developing and implementing HVAC, mechanical utility and piping systems designs Preferred Qualifications • Life Sciences (Pharmaceutical, Biotech, Laboratory) or Food & Beverage industry experience, • Intermediate knowledge of GMP manufacturing environments, • Proficiency in Revit and AutoCAD, • Proficiency in Microsoft Office suite and Bluebeam Revu, • LEED, WELL or other sustainable design accredited professional or, experience with sustainable design, • Intermediate experience with using and applying mechanical/plumbing/fire/building codes, • Intermediate experience with using and applying industry standards (ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, OSHA, etc.), • Intermediate experience conducting and leading field surveys of existing conditions and support of field reporting, • Intermediate experience in plumbing design, • Basic experience using Revit plugins such as Enscape and Unifi, • Basic experience building parametric workflows using Dynamo, Grasshopper, and/or Rhino within Revit, • Proficient with intermediate internal and external cross-discipline project team coordination, • Proficient with intermediate coordination with construction trade partners, vendors and manufacturers, • Basic experience with troubleshooting issues with mechanical equipment and systems #LI-HYBRID #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description A Tax Senior Manager with PYA is responsible for overseeing tax compliance, planning, and consulting services for a diverse client base. The Tax Senior Manager leads and mentors tax teams, reviews complex tax returns, manages client relationships, and ensures compliance with federal, state, and local tax regulations. The Tax Senior Manager would be expected to use their experience to advise clients and develop a true trusted advisor relationship. Locations: Atlanta, GA | Nashville, TN | Tampa, FL Responsibilities: • Here are some additional expectations of our PYA Tax Senior Manager leadership position:, • Lead clients and teams with a demonstrated excellence in project management and relationship development, • Advise clients on a variety of tax issues, resulting in the successful completion of tax planning, advisory, accounting, and compliance projects, all while maintaining focus on client service excellence, • Develop a team of tax consultants and other subject matter experts to ensure exceptional client service to PYA tax clients, • Cultivate existing business client relationships and advance opportunities with new prospect leads Qualifications: • 7+ years of tax experience within a public accounting and/or consulting firm, or equivalent experience in industry tax leadership, • CPA, EA license, or another recognized certification is required, • Client-oriented work ethic, committed to high-quality results, • Creative problem-solving skills with a high level of strategic, analytical, and conceptual skills and a passion for helping client, • Additionally, PYA prides itself on the services it provides to the healthcare, financial institution, and real estate industries. In addition, PYA continues to see growth opportunities in professional services and manufacturing. Experience in one or more of these industries, while not required, will enhance the qualifications of any applicant About PYA: PYA, a leading independent professional services firm, serves clients across the United States with expertise in consulting, accounting, audit, tax, compliance, and business strategy. With offices in Knoxville, Atlanta, Tampa, Charlotte, Nashville, and Kansas City, PYA is committed to helping clients achieve their goals through innovative solutions and unparalleled service. PYA is also a member of HLB, the global accounting and advisory network, with affiliate firms in over 150 countries. Learn more about The PYA Way. Why PYA? • Be part of a dynamic and collaborative team that values innovation and excellence, • Work with industry leaders who are committed to professional growth and client success, • Competitive compensation, comprehensive benefits, and opportunities for career advancement

Job Description PDS 5 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation P&C Engineer to be responsible for the design and/or checking of deliverables associated with a high voltage substation. This typically includes, but is not limited to: single line diagrams, control house layouts, panel front views, elementary and/or schematic diagrams, wiring diagrams, nameplate drawings, bills of materials, and cable schedules, as well as construction turnover documentation • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Professional Engineer (PE) License preferred, but not required, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Cannon & Cannon, Inc. (An Ardurra Company) is seeking a Senior Project Manager – Substation Engineering to lead complex electrical substation projects while serving as a trusted partner to our utility and industrial clients. This role blends technical leadership, project execution, and customer success, ensuring projects are delivered on time, on budget, and aligned with client expectations. The ideal candidate brings deep knowledge of substation design and construction, strong cross-functional leadership skills, and a customer-first mindset. What You’ll Do • As a Substation Engineer, you will:, • Plan, organize, and supervise the work of engineering professionals and technicians., • Lead detailed design of high-voltage substations, including:, • General arrangement and equipment layout, • Elevations and sections, • Bus and cable layout and calculations, • Grounding design and analysis, • Shielding design and analysis, • Facility lighting, • Single- and three-line diagrams, • Protection and control schematics, • Wiring and connection diagrams, • Foundation layout and design, • Secondary containment design and calculations, • Protective relay settings, • Prepare and/or review:, • Calculations for faults, grounding, lightning protection, and rigid bus bracing and supports, • Transformer sizing, • AC and DC auxiliary system sizing, • Arrester and insulator coordination and selection, • Project specifications for materials, equipment, and construction requirements, • Perform other electrical design and studies, including substation design; arc flash, system, capacitor, and grounding studies; and design support for electrical power supply elements in street lighting and traffic signal designs., • Perform point selection for substation IEDs and interface with SCADA, communications, and security systems., • Your work will directly contribute to shaping environments where people live, work, and thrive, all while growing your career within a supportive, people-first culture. Required Qualifications • A bachelor’s degree in Electrical Engineering (BSEE), Mechanical Engineering (BSME), or a related field from an accredited four-year college or university, • 10 years of experience in high-voltage electric substation design, • 10+ years of project management experience, • Registration as a Professional Engineer (PE) and willingness to obtain additional licenses in other states, • Detailed knowledge of NEC and NESC code requirements, • Strong understanding of power utilization equipment, including switchgear, protective relays, breakers, transformers, motors, and generators, • Experience in the utility industry, • Effective verbal and written communication skills to engage with clients, partners, and team members, • Experience managing budgets, schedules, and risk, • 30% Travel Required Preferred Qualifications 10-12 years' experience working in utility substations Previous experience leading a design team and mentoring junior engineers • PMP or equivalent project management certification Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job DescriptionDescriptionWe are looking for a Roadway Design Engineer in Knoxville, TN with the opportunity to work on signature projects and collaborate with other design staff. HMB is part of a transportation family ranked #14 in the country with unlimited growth potential. We have national capabilities but maintain a local feel. Engaged professionals are the heart of our vision statement. That’s why we strive to create a work environment that challenges and inspires our employees, igniting their passion and drive to achieve greatness every day. Key Responsibilities Support the completion of roadway design tasks through collaboration with project teams and mentorship from senior engineers· Work closely with Project Managers to ensure designs meet schedule and budget expectations· Gain valuable experience with the opportunity to grow into a Project Manager role through mentorship and increasing responsibility· Prepare timely and accurate design drawings, details, presentations, and construction documents in accordance with applicable standards· Assist in the preparation of permit applications and submittal packages for review by regulatory agencies· Coordinate with clients, subconsultants, permitting agencies, right of way staff, utility providers, project stakeholders, and contractors under the direction of senior staff· Support the development and tracking of project scopes, schedules, and budgets to ensure project objectives are met Skills, Knowledge and Expertise • A minimum of 6 years experience in all technical aspects of roadway design, • Experience with OpenRoads Designer preferred, • PE Certification is preferred, • Detail-oriented individual with strong technical and organizational skills, • Proficiency in spreadsheets, word processing and standard industry software., • Works well in multidisciplinary team environments and ability to meet deadlines., • Strong oral presentation and written communication skills, • A self-starter that can take initiatives with key stakeholders Benefits • Excellent compensation package, • Flexible work schedule, • Ability to work hybrid work schedule, • Competitive holiday and paid-time-off programs, • 401(k) Plan and Match, • Competitive health, vision and dental insurance premiums, • Company-furnished life insurance, • Short and Long-term Disability, • Parental Leave, • Variety of voluntary benefit options, • Employee Assistant Program (EAP), • Flexible Spending Account, • and More#LI-MK1

Job Description Path Construction is seeking a qualified Assistant Project Manager to join our organization in Knoxville, TN. We are a rapidly growing commercial general contractor with offices in Arlington Heights, IL; Knoxville, TN; Charlotte, NC; Tampa, FL; Dallas, TX; and Phoenix, AZ, with projects ongoing throughout the United States. Typical duties of an APM include managing day-to-day activities of subcontractors and suppliers, contract administration, procurement, estimating, pay requests, change orders, requests for information, cost control, scheduling, tracking submittals, maintaining and delivering a high level of quality. The right candidate will have 2+ years of construction management experience on large and/or small projects and varying asset classes including but not limited to, Higher Education, Retail, Multi-family, Healthcare, Restaurant, Transportation, Water and Waste Treatment, Convention Centers, Laboratories, Correctional, etc. Path is looking for people with great technical skills, good communication skills, and strong attention to detail. Founded in 2008, Path Construction is a general contractor providing a vast array of construction services to multiple regions throughout the country. Our expertise is very diverse and includes experience on small and large projects of many different types, including but not limited to: healthcare, hospitality, higher education, multi-family, self-storage, senior living, transportation, water and waste treatment, convention centers, laboratories, and correctional. The main philosophy and strategy for the growth of our organization is to be on the cutting edge of all aspects of the construction process. Additionally, our unmatched customer satisfaction and, most importantly, the development and quality of our people drive our success. For more about us, please visit our website at www.pathcc.com. Duties for an Assistant Project Manager include: • General Contract and Subcontract administration, • Monitor and document jobsite safety and accident prevention, • Construction Scheduling, • Material & Equipment – procurement and expediting, • Process RFI’s, • Receive, • Review, • Submit, • Log, • Shop drawing and submittal review and coordination, • Project cost review, reporting, updating and accounting, • Review of subcontractor applications for payment, • Participation in and documentation of project coordination meetings, • Supervision and coordination of subcontractors’ field installations, • Review and negotiate change proposal pricing from subcontractors, • Prepare change proposals, • Change order documentation and associated cost reporting and maintenance, • Research and suggest options on construction means, methods and equipment, • Quality control, • Project Closeout, • Implement all applicable Safety Programs and EEO/Affirmative Action Programs on the Project Requirements • A 4 year degree in Building Contruction, Engineering, or a related field, • 2+ years of building and construction management experience, • OSHA Site Safety Experience, • Up-to-date with modern technology and display excellent communication skills, • General knowledge of construction principles/practices required, • Strong work ethic and desire to work in a team environment and grow the company, • Must have a valid driver’s license and ability to travel may be required, • Working knowledge of project management process and software. (Microsoft Office and SAGE 300 CRE), • Proficient in Microsoft Office Preferred • Public work experience is a plus, • Estimating experience is a plus, • Self Perform experience is a plus, • OSHA 30 Hour Training, • LEED Project Experience Benefits • Competitive Compensation, • 401(k), • Health, Dental, Vision, Life, Long-Term and Short-Term Disability Insurance, • Company cellphone and computer, • Financial and Mental Health Support through a third party, • Travel and Entertainment Discount Program

Job Description Company Overview: Arctiq is a global, intelligence-driven technology services company delivering professional and managed services across Hybrid Cloud Infrastructure, Networking & Connected Experiences, Cybersecurity, Data & AI, Autonomous Operations & Intelligence, and Enterprise Service Management. We help organizations operate, secure, and modernize complex environments by unifying infrastructure, networking, data, security, automation, and observability under a single, integrated operating model. Our work focuses on helping customers reduce operational friction, improve resilience, and make better, faster decisions as their environments evolve. Arctiq builds on decades of industry expertise and a customer-centric ethos to deliver exceptional value to clients across diverse industries. This is an on-site, full-time opportunity for one of Arctiq’s clients in Knoxville, TN. Position Overview: Strategic Technology Advisors (STA) are responsible for building long-term trusted relationships with our clients, understanding their business needs, and providing a strategic technical vision through regular technology business reviews. Focusing on both the client’s business and technology infrastructure, STAs provide digital transformation and technology guidance in alignment with platform of services, ensuring operational health, security, efficiency, and competitive advantage while helping clients to mitigate risk and increase productivity. Responsibilities: • Maintain strong client relationship, serve as trusted strategic advisor leveraging scheduled, ad-hoc, and C-Level meetings., • Develop and maintain a deep functional knowledge of customer’s goals, technical challenges, business objectives, critical infrastructure, and proactively mitigate risk within the environment., • Perform Technical Business Review (TBRs) meetings based on clients short- and long-term business needs, technology trends and present solutions in alignment with company's services and methodologies., • Perform trend analysis and leverage reports to drive data driven decisions, recommendations, operational improvements, for both the client and company., • Maintain technical competence by attending and participating in trainings, webinars, and certification courses., • Collaborate with internal technical teams regarding execution of advisory driven project planning., • Provide client-based feedback to company management on new needs not currently addressed within company's service catalog with a focus on continuous improvements and enhancements., • Forecasting opportunity (risk, profitability, prediction, etc.) on assigned accounts, • Assist with client facing budget forecasting, financial cost analysis reports and documentation., • Maintain a high customer satisfaction and renewal rate for assigned customers., • Other duties as assigned. Requirements: • At least five years of experience in a similar customer service, technical advisory, or IT Director/Manager oriented role., • Technically literate in cloud and on-premises enterprise network infrastructure, including end-user devices, virtualization, networking, wireless, backup & disaster recovery, and cybersecurity., • Business literate with basic to intermediate skills in strategy, budgeting, forecasting, and risk management, problem solving., • Proven ability to adapt to new technologies, situations, and environments and learn quickly., • Demonstrated presentation skills, including confidence and comfort over the phone and in front of audiences both small and large., • Exceptional interpersonal skills and ability to build relationships with senior-level executives as well as negotiate with and influence both internal and external decision makers., • Professional experience in relationship management, conflict resolution, and negotiation skills., • Strong leadership skills, acting as our clients’ trusted advisor., • Excellent written and oral communication skills, including client-facing presentation skills. Arctiq is an equal opportunity employer. If you need any accommodations or adjustments throughout the interview process and beyond, please let us know. We celebrate our inclusive work environment and welcome members of all backgrounds and perspectives to apply. We thank you for your interest in joining the Arctiq team! While we welcome all applicants, only those who are selected for an interview will be contacted.

Job Description COMPANY OVERVIEW Realty Trust Group (RTG) is a national leader in providing comprehensive real estate solutions for the healthcare industry. With a team of over 150 dedicated professionals, we serve clients in more than 40 states across the country. Our objective, accountable, and trusted expertise enables us to deliver innovative solutions in healthcare real estate through a comprehensive range of services, including advisory, development, transactions, operations, and regulatory compliance. We are honored to have received the "Best Places to Work" recognition from Modern Healthcare for five consecutive years, a testament to our unwavering commitment to fostering an exceptional work environment that values the well-being and professional growth of our employees. Furthermore, RTG was recently named a "Best in Business" company and ranked among the Top Healthcare Development Companies by Modern Healthcare, solidifying our position as a leader in the industry. In addition to our accolades, we currently manage a portfolio of over 26 million square feet of healthcare assets and have successfully completed healthcare transactions totaling more than $3 billion, reinforcing our expertise and reputation in the industry. With offices in Nashville, Knoxville, and Johnson City, TN; Atlanta, GA; Tampa, FL; Houston, TX; and Greensboro, NC, we are well-positioned to deliver exceptional services tailored to the diverse needs of our clients nationwide. For more information about RTG and our innovative healthcare real estate services, visit www.realtytrustgroup.com. Stay connected with us on Facebook, YouTube, and LinkedIn for the latest industry insights and company updates. JOB DESCRIPTION and RESPONSIBILITIES The Assistant Property Manager is responsible for assisting the Property Manager and/or Senior Property Manager in organizing and coordinating the activities of properties within a portfolio, including physical property management, financial and budget reporting, and tenant relations. This position may have oversight of 1-2 assets directly while assisting Property Manager and/or Senior Property Manager with his or her assigned portfolio. Specific responsibilities include: • Assist in developing and maintaining positive tenant relations by creating and sustaining good will between landlord and tenant by providing consistently responsive quality services., • Assess tenant satisfaction and create and implement action plans to improve this metric., • Collaborate on preparation and administration of operating and capital budgets, manage expenses to ensure that the property meets or exceeds budget expectations, and develop monthly reports documenting the results., • Assist in preparing monthly reporting and budgets to client, as well as be responsible for other necessary reports, forms, and required documents as instructed., • Assist in implementing internal departmental policies and procedures, physical property procedures, controls, and checklists. Enforce rules and regulations of properties and their respective leases., • Maintain current service agreements, vendor certificates of insurance, tenant emergency notification information, building life safety and security procedures building certificates of occupancy, warranty manuals, and other records as required by assigned properties. Secure appropriate bids, negotiate, and administrate service contracts., • Monitor vendor performance with authority to recommend necessary changes if performance metrics are not met., • Monitor and coordinate the completion of work orders. Conduct required maintenance follow up to ensure inspections and work orders are addressed satisfactorily and timely. Provide assistance as required in coordinating and monitoring construction, tenant improvement, capital, and property renovation projects., • Acquire a working knowledge of all operations and financial policies, procedures, reporting and systems., • Coordinate and assist with tenant move-ins and move-outs., • Provide a wide range of support, including administrative, to a Senior or Property Manager. COMPETENCIES • Must work well together and in a professional team environment., • Adaptable., • Strong communicator., • Detail oriented., • Organized., • Problem solver., • Multi-tasker., • Self-starter., • Able to accept constructive criticism., • Timely decision-maker. EDUCATION AND EXPERIENCE • High school graduate. Associate's or Bachelor's degree is preferred. Active real estate license is required, and a professional designation (CPM or RPA) is preferred., • Commercial Property management, facilities management, and/or brokerage experience or equivalent preferred., • Proficient with Microsoft Office Suite. Experience in Yardi Property Management software preferred. Experience with MLS platforms and other real estate databases (CoStar, LoopNet). ALLOCATION OF TIME • Client / Project Work – 95%, • Administrative –5% Travel typically not required, except to visit RTG regional offices as needed for training, teambuilding, or other specific initiatives. BENEFITS RTG offers a competitive compensation package, including an incentive-based compensation plan, health, life and long-term disability insurance; 401(k) with company matching; and profit sharing. To apply to this role or to view our other opportunities, please visit: www.realtytrustgroup.com/careers

Job Description Overview Job Summary: The Clinical Client Success Manager is responsible for routinely managing client accounts, proactively communicating with all clients, and providing day-to-day management and operational support of clinical services. Key driver for success in this role is customer engagement and retention. Work Structure: Hybrid opportunity with continued focus on current responsibilities while supporting Clinical Client Success initiatives. Responsibilities Leadership · Influence and manage client expectations regarding MPOWERHealth products and services. · Continually seek opportunities to improve operations, including people, processes, methodologies, and technologies. · Mentor fellow Client Success team members. · Regularly interact across functional areas with senior management to ensure objectives are met. · Regularly communicate with assigned accounts, set expectations, and negotiate priorities appropriately. · Provide the leadership to ensure that clients’ service delivery needs are met in all geographic and functional areas throughout their lifecycle at MPOWERHealth. Client Onboarding · Onboard new clients from initial meeting through scheduling cases with ongoing proactive communication with a high focus on new clients in their first 9 months of onboarding. · Coordinate with internal departments on implementation of new client business. Client Experience · Drive clear thinking and excellent problem solving to a range of business or clinical challenges that may arise. · Responsible for identifying and executing opportunities to engage clients. · Develop a trusted advisor relationship with client stakeholders to ensure they are leveraging the MPOWERHealth services to achieve full business value. · Proactively own and manage service delivery for high-visibility and high-touch client relationships. · Perform regular calls or face-to-face meetings with assigned clients to review reporting, additional training needs, project status, review outstanding issues and any new opportunities to integrate additional services. · Communicate consistently with management regarding key escalations and priority issues. · Partner with clients and help them follow best practices and optimize use of MPOWERHealth’s services/products. · Understand short and long-term client goals and objectives. · Keep the client informed of key information that may be critical to their success (e.g., new services, client events, or industry changes). · Proactively manage, measure, track, and resolve client issues to ensure their timely resolution · Lead recurring meetings with surgeons. · Analyze operational metrics, identify trends and problem areas for all assigned clients. Partner closely with functional operational leaders to ensure client needs, Service Level Agreements and business goals are met. · Serve as the voice of the client, track the pulse of our clients, and help them get the most out of our products and services. · Drive issue resolution using standard process/procedures in coordination with supporting resources. · Collaborate with the clinical leaders, analyze, summarize, report, and manage performance data related to business operations. · Other duties as assigned Client Reviews · Perform regular tailored client account reviews to discuss client performance metrics (Service Level Agreement, Client satisfaction). · Deliver excellent client experience through a data driven approach. · Monitory and evaluate client satisfaction, identify additional needs that align with MPOWERHealth’s service offerings, and proactively address client concerns or requests. Optimization and Special Projects · Lead and participate in projects that directly impact the client, including process improvement initiatives. · Improve internal efficiency and client satisfaction by proactively identifying opportunities to optimize existing or new services, processes and tools. · Recognize and resolve systemic issues to prevent them from repeating. · Client Service Tickets & SF Administration · Document, track, and support compliance with Service Level Agreements. · Track client information in SalesForce Business Development · Identify and seek opportunities to cross-sell MPOWERHealth suite of products and services through finely tuned client relationships as they are built. · Assist Business Development team in various sales meetings with new clients. · Play an active role in supporting the renewal process. · Monitor and recommend strategies to increase client usage and adoption Qualifications Education and/or Experience · Bachelor’s Degree or equivalent combination of education and experience. · 3-5 years’ experience as an Account Manager or similar role, with emphasis on client accounts within healthcare revenue cycle management. · Experience in insurance, benefits, or healthcare revenue cycle. · Experience in developing executive level client relationships including negotiation, presentation, and polished communication skills. Skills/Specialized Knowledge · Successful management of cross-functional and interdepartmental teams to achieve client goals. · Ability to manage multiple projects, responsibilities and competing priorities · Ability to review data, provide analytical feedback and make recommendations. Strong written and communication skills · Comprehensive knowledge of Microsoft Word, Excel and PowerPoint. · Ability to influence others and work cross-functionally, navigating within a multi-state organization. · Ability to manage ambiguity and the organizational acumen to establish effective internal networks. · Flexible and adaptive to changing business requirements and environment, able to influence difficult clients. · Ability to lead client discussions and have a high comfort level with conflict resolution. · Ability to work closely and collaborate with every department within MPOWERHealth. · Ability to prioritize, multi-task, and perform effectively under pressure. · Be a self-starter who is eager to learn the business at a fast pace. · Troubleshooting and problem-solving skills with creative ability to overcome challenges · Strong organization, analytical, and project management skills and the ability to effectively multi-task. · Exceptional presentation skills and the ability to pull together materials that have a meaningful impact. Other Requirements · Must maintain professional appearance. · Ability to be at work on a regular and consistent basis · Travel expectation of 25%, at a minimum, with the potential for additional travel as necessary Physical and Mental Demands This position will spend long hours sitting and using office equipment and computers. The position may also entail light lifting of supplies and materials occasionally, up to and including 20 pounds in addition to reaching, stooping, standing, and walking. This position requires the ability to talk, hear, compare, compute, compile, copy, analyze, coordinate, synthesize, negotiate and communicate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Work Environment Standard office working environment that may be busy and noisy at time What’s Next? If you’re ready to bring your skills and passion to our growing team, we want to hear from you! Apply today and help us create a future where success is the standard.

Job Category: ENG2 Requisition Number: SUBST003324 Posted: June 30, 2026 Full-Time Hybrid Knoxville, TN 37932, USA PDS 5 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our "mesainc.com" domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation P&C Engineer Associate II to be responsible for the design and/or checking of deliverables associated with a high voltage substation. This typically includes, but is not limited to: single line diagrams, control house layouts, panel front views, elementary and/or schematic diagrams, wiring diagrams, nameplate drawings, bills of materials, and cable schedules, as well as construction turnover documentation. • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Works under the direction of Senior Engineers and Project Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the Project Engineer and Program Manager to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Performs technical and coordination checking of deliverables and other project documents. Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs. Skills Preferred Microsoft Office: Intermediate Engineering Design: Advanced CAD: Intermediate Autodesk: Intermediate Required Detail Oriented Capable of carrying out a given task with all details necessary to get the task done well Preferred Dedicated Devoted to a task or purpose with loyalty or integrity Team Player Works well as a member of a group Functional Expert Considered a thought leader on a subject Leader Inspires teammates to follow them Preferred Growth Opportunities Inspired to perform well by the chance to take on more responsibility Work-Life Balance Inspired to perform well by having ample time to pursue work and interests outside of work Self-Starter Inspired to perform without outside help Preferred Bachelors or better in Electrical Engineering. Preferred 2-4 years: This position requires 2-4 years of substation P&C design experience Preferred Engineer in Training Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

About the Role** As a Senior Cost Manager, you will oversee multiple multi-disciplined commercial real estate cost solutions for clients with direct or indirect accountability for cost delivery. Project Managers to ensure all work is funded in compliance with the client's internal policies.

Senior Manager, Project Management - Imaging.ICON is a global healthcare intelligence and clinical research organisation united by a mission to bring new medicines and treatments to patients faster.As a values-driven organisation, integrity, collaboration, agility, and inclusion are at the heart of

The Senior Project Manager has the experience and expertise to assume a leadership role on individual projects of larger size or greater complexity. May supervise other Project Managers, accountable for their performance and project completion to ensure adherence to Contract Documents and to exceed

Senior Project Manager - Aviation.Accura Engineering is looking for a Senior Project Manager to join our Aviation program in Nashville, TN.The primary duties will include planning, directing, and monitoring all aspects of multi-discipline airport projects with high degrees of technical complexity an

ABS is seeking an exceptional Project Manager to join us full-time.In this senior role, you will lead end-to-end delivery of AI projects across a maritime portfolio, orchestrating a team of 5 10 technical and domain specialists.You will own planning, execution, and governance for dozens of concurre

Water/Wastewater Senior Project Manager.Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm with more than 2,800 professionals, providing a full range of multidisciplinary engineering, architecture, information technology, and related services to public agencies and privat

Senior Natural Resources Project Manager.S&ME seeks a motivated and passionate Senior Project Manager to join our Natural Resources team in one of our Region 3 offices (Nashville, Chattanooga, Knoxville, Tennessee, and Huntsville, Alabama).Are you ready to contribute your education and knowledge to

Ledcor Technical Services is undergoing rapid growth, and we are seeking Senior Project Managers with the leadership experience and technical expertise to oversee and deliver complex, high-impact telecom infrastructure projects.You will be responsible for ensuring projects are delivered on schedule,

Job Description Our client is a growing Multi-Family General Contractor working in the Southeast. Due to expansion, we are seeking a few quality Project Managers to round out their team! The Project Manager coordinates and supervises: Multi Family, Student Housing or Senior Living Projects. The PM's report to the executive leadership team and interfaces with all parties involved in the project including development and ownership teams, authorities, design consultants, other consultants, field team members, contract administration and accounting, and subcontractors and suppliers. We are seeking construction professionals with: • strong work ethic, • adept at managing multiple projects, • able to delegate,, • strong written and verbal communication, • negotiation skills, • time-management, • organized, • leadership qualities, • problem solving mindset Software Desired: • MS Office Suite, • ProCore, • Plan Swift or other estimating software is a plus Compensation Package: Basic: up to $165,000.00 Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • HSA, • Life insurance, • Generous Time Off, • Vision insurance We believe that this client offers a quality offering to their employees. If this sounds like your next step let's discuss, please send your resume and project list to Jharris@constructionexecs.com and let's discuss1

Job Description JOB PURPOSE: The Project Manager will complete installations of BMS Systems by organizing and controlling project elements and progress. Employment at Will: Nothing herein is intended to create a contract of employment or to guarantee employment for a definite duration. PROJECT MANAGER ESSENTIAL JOB RESULTS: • ORGANIZES CONSTRUCTION PROJECTS by accepting new projects from Administration; collecting and completing all needed project documentation; analyzing construction project timelines; understanding project requirements, collaborating with Operation Supervisor on needed commissioning workload timeline; conferring and collaborating with engineering and programming team as needed for proper scheduling., • HIRES ELECTRICAL SUBCONTRACTORS by reviewing competitive bid information; communicating with Sales as necessary; creating and maintaining proper subcontract documentation; enforcing proper execution of subcontract document., • DIRECTS ELECTRICAL SUBCONTRACTORS by reviewing project information, subcontract and specifications with subcontractor; communicating project timeline information; prioritizing areas of completion; answering questions to assure proper installation; enforcing proper installation methods; verify completion of project documentation., • ORDERS PROJECT MATERIAL by completing proper material requisition documents for Part Distribution; selecting and coordinating with the panel builder; scheduling delivery of material with site needs; communicating with customer as to necessary storage of material., • BILLS CONSTRUCTION PROJECTS by collaborating with Administration for the proper creation of billing; coordinating with customer for needed billing requirements., • COMMUNICATES PROJECT INFORMATION by communicating as needed with Engineering/Programming, Technicians and Ops Management team as to construction progress; performing periodic jobsite visit; documenting jobsite visits; attending necessary jobsite meetings; updating any project deadline information; advising as to any changes in schedule or change orders; prices and directs change orders as needed., • COMPLETES CONSTRUCTION PROJECTS by assisting technicians with organizing, prioritizing and scheduling start-up assignments; assisting coordination between technicians Engineers and Programmers for needed modifications and corrections; accepting turnover documentation from Technicians for project close-out; preparing project close-out documentation; transferring needed As-built data to Engineering/Programming; completing Service turnover documentation; completing Owner Training., • ACHIEVES FINANCIAL OBJECTIVES by collaborating with Ops management team by reviewing monthly job labor cost reports; initiating corrective actions as directed., • MAINTAINS INDUSTRY TECHNICAL KNOWLEDGE by attending approved educational workshops; reviewing industry publications; maintaining knowledge on proper electrical and mechanical installation methods; maintaining knowledge of project management issues (i.e. contract negotiation)., • MENTORING LESS SENIOR PROJECT MANAGERS by assisting in the recruiting and training of new employees (as needed); sharing technical knowledge; sharing installation knowledge., • PROVIDING QUALITY CONTROL OF INSTALLATIONS by complying with and enforcing needed project safety requirements; critiquing and enforcing proper and safe commissioning methods; verifying conformance for proper project commissioning documentation; verifying completion of all project tasks; communicating needed corrections in standards to Ops Management Team., • CONTRIBUTES TO TEAM EFFORT by leading by example; initiating an open and positive attitude; preparing for and attending job progress review meetings; accomplishing related results as needed., • WILLINGNESS AND ABILITY TO TRAVEL by Cooperating and understanding the importance high profile customers with locations in multiple regions and recognizes a sense of urgency with those needs. Benefits of working at the Hoffman Family of Companies: We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. In addition to an ESOP, we offer medical, dental, vision, life insurance and PTO! EOE/Vets/Disabled Final pay is commensurate on experience.

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid for on the job We are seeking a Field Project Manager who will lead all phases of fiber deployment projects, ensuring seamless coordination between field teams, customers, and internal stakeholders to meet deadlines and quality standards. This role is responsible for driving operational excellence in the field, managing day-to-day activities, and resolving issues to keep projects on track. The Field PM will collaborate closely with leadership to define strategic objectives and deliver on performance goals for the Fiber Services division. Responsibilities • Coordination with Senior Operations Manager to ensure adequate resources (staffing, equipment, and vehicles) are available to meet the needs of customers., • Coordination with customers to determine overall project scope and ensure that expected timelines are met., • Assess incoming fiber projects to outline detailed work plan and determine necessary resources (labor, materials, and equipment)., • Maintain and monitor project schedule including work assignment to CCI Foreman, Fiber Splicers, and Subcontractors to ensure timely completion., • Coordination with CCI Foreman, Fiber Splicers, and Subcontractors to ensure understanding of assigned tasks and related deadlines., • Provide regular updates regarding project status, timelines, and other key metrics of projects to both customers and management team., • Provide general facilitation and oversight of Subcontractors., • Provide QC support for customer deliverables., • Perform other related duties as assigned by management. Qualifications • Bachelor’s degree in Construction Technology or similar field of study preferred., • 3+ years’ technical experience in OSP Fiber Splicing, Design, or Field Construction Coordination., • Advanced understanding of fiber design with the ability to interpret fiber documentation., • Experience with Microsoft Office Suite, SharePoint, Project Management Software, and various web-based software., • Professional communication, demonstrated through exceptional written and verbal abilities., • The ability to prioritize tasks, manage multiple projects, and meet deadlines., • Ability to take initiative, make decisions and handle various tasks simultaneously while working efficiently, effectively, and independently or with minimal supervision., • Well-organized with an ability to work confidently in a high-pressure/high-energy environment., • Must be able to handle customer issues and concerns effectively and promptly., • Must be willing to learn new product lines and technologies to serve departmental needs and goals., • The ability to embrace corporate values, understand the company vision, and exemplify CCI leadership behaviors. Shift is Monday-Friday between the hours of 7:00 a.m. to 5:00 p.m. CST but must be able to work outside normal business hours when required. Additional Information: • Regular field visits or off-site meetings with both CCI staff and customers., • Travel may be required dependent on project needs., • Must have a valid driver’s license and a good driving record., • Mileage Reimbursement. #LI-DNI

Job Description Path Construction is seeking a qualified Construction Project Manager to join our team in the Knoxville, TN area. We are a rapidly growing general contractor headquartered in Arlington Heights, IL, with additional offices in Dallas, TX; Phoenix, AZ; Charlotte, NC; Knoxville, TN; and Tampa, FL, serving clients and projects throughout the United States. The ideal candidate will have at least 5 years of project management experience in commercial construction. We're looking for someone with strong technical expertise, excellent communication skills, and a sharp attention to detail. Duties for Construction Project Managers include: Leading and managing a project team in building a successful project, managing day-to-day activities of subcontractors and suppliers, contract administration, procurement, estimating, pay requests, change orders, requests for information, cost control, scheduling, tracking submittals, safety controls, maintaining and delivering a high level of quality.. About the Company Founded in 2008, Path Construction is a commercial general contractor providing a vast array of construction services to multiple regions across the country. Our experience spans a wide range of project types, including healthcare, multifamily, retail, higher education, hospitality, transportation, self-storage, senior living, water and wastewater treatment, convention centers, laboratories, and correctional facilities. Our growth is driven by a commitment to quality, innovation, customer satisfaction, and the development of our people. Requirements • Bachelor's degree in Engineering, Construction, or Architecture, • 5+ years construction experience, • Primavera/Microsoft Project scheduling experience, • Occasional travel (1-3 days per month), • Estimating experience is a plus, • Proficient in Microsoft Office Benefits • Competitive Compensation, • Annual Bonus Plan, • Certification Training, • 401(k), • PTO, • Health, Dental, Vision, Life, Long-Term and Short-Term Disability Insurance, • Company cellphone and computer, • Financial and Mental Health Support through a third party

Job Description Senior Natural Resources Project Manager Requisition Number: 2026-2703-02 S&ME seeks a motivated and passionate Senior Project Manager to join our Natural Resources team in one of our Region 3 offices (Nashville, Chattanooga, Knoxville, Tennessee, and Huntsville, Alabama). Are you ready to contribute your education and knowledge to meaningful projects? Join us at S&ME! S&ME prioritizes high-quality client relationships, sound technical approaches, and collaborative problem-solving with coworkers, clients, and project team members. We provide integrated services to our clients in the Commercial Real Estate, Institutional, and Transportation Markets, and we continually focus on client success. As a Senior Natural Resources Project Manager, you'll lead a variety of environmental and natural resource projects from early planning through completion, balancing regulatory compliance, technical quality, client needs, and team coordination. This role blends fieldwork and office responsibilities and requires close collaboration with regulatory agencies, clients, and internal teams. You'll play a key role in delivering sustainable solutions while supporting project performance, safety, and professional growth within the team. Your Day-to-Day: • Project Management & Delivery: Manage natural resources projects from proposal development through execution, including scopes, schedules, budgets, and client communication to ensure projects are delivered on time and within budget., • Regulatory Coordination & Permitting: Coordinate with federal, state, and local regulatory agencies to evaluate jurisdictional waters, support environmental permitting efforts, and ensure compliance with applicable regulations., • Field Investigations & Assessments: Conduct and oversee wetland delineations, stream determinations, mitigation support, ecological assessments, and protected species surveys as needed., • Team Leadership & Collaboration: Work alongside and mentor technical staff, ensuring safety, quality standards, and operational objectives are met while coordinating with other service lines to support project needs., • Client & Community Engagement: Build and maintain strong client relationships, provide regular project updates, and represent the company in professional and community settings to support business development and visibility. What You Bring: • A Bachelor's degree in Biological or Environmental Sciences or a closely related field, • 10+ years' experience that includes at least 3 years of experience with wetland delineations, stream determinations, environmental permitting, mitigation, protected species surveys, and ecological surveys, and previous experience in the southeast U.S., • Demonstrated successful team leadership and management at a project level with a good understanding of safety policies/procedures, quality, business metrics, human resources policies/procedures, and risk management concepts, • GIS experience and/or knowledge, • Excellent oral and written communication skills for clients, staff, and regulatory personnel, • TDEC Qualified Hydrologic Professional certification required for our Tennessee locations Working Conditions and Physical Demands: You are willing and able to perform the physical demands of this position with the use of Company-provided Personal Protective Equipment, such as: • Working outdoors in varying weather conditions, outside of normal business hours when necessary, • Walking over rough, uneven terrain and standing for potentially long periods, • Routinely lifting and carrying 40-50lbs (field/laboratory samples and equipment) We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description Eskola, LLC – Knoxville, Tennessee Visit Our Website: https://eskolaroofing.com Position: • Commercial Roofing Project Manager Compensation: • $75,000 - $90,000 (Based on Qualifications & Experience) Benefits Offered: • Medical, Dental, Vision, Life, & Disability Insurance, • 401K & 401K Matching, • Paid Time Off, • Health Savings Account, • Equal Opportunity Employer Employment Type: • Full-Time (In Person), • Monday - Friday, Standard Business Hours, • Relocation Eligible Position Summary: Eskola, LLC's Knoxville, Tennessee branch is seeking a motivated individual to join our growing team! The Project Manager is responsible for planning, coordinating, and executing roofing projects for commercial clients. This role ensures projects are completed safely, on time, and within budget while meeting high quality standards. The ideal candidate will combine deep industry knowledge with strong leadership and project management skills. Key Responsibilities & Duties: Project Oversight: • Direct daily production activities for commercial roofing projects, ensuring work is completed on schedule and to industry standards., • Develop and implement production schedules, monitor progress, and adjust plans as needed. Team Leadership: • Lead, train, and supervise on-site production teams, subcontractors, and support staff., • Foster a collaborative environment that emphasizes safety, quality, and continuous improvement. Resource and Budget Management: • Develop and adjust project budgets and schedules, ensuring efficient use of resources and timely completion., • Coordinate the procurement and delivery of roofing materials and equipment to maintain production flow., • Monitor project budgets and expenses, ensuring cost-effective operations without compromising quality. Quality and Safety Compliance: • Enforce strict adherence to OSHA guidelines, company safety policies, and industry best practices., • Conduct regular site inspections and quality checks, promptly addressing any issues or discrepancies. Stakeholder Coordination: • Collaborate with architects, engineers, clients, and suppliers to ensure clear communication regarding project timelines, progress, and any potential challenges., • Provide detailed progress reports and performance metrics to senior management. Risk Management: • Identify potential risks and implement proactive solutions to mitigate delays or cost overruns. Documentation and Reporting: • Maintain accurate project records, prepare progress reports, and present updates to stakeholders. Position Requirements and Qualifications: Education and Experience: • Minimum of 5 years experience in commercial roofing project management or a similar role., • Must be able to successfully complete a pre-employment background check and drug screening as a condition of hire, • Must possess a valid driver’s license and maintain an acceptable driving record that meets company and insurance requirements Skills and Competencies: • Strong knowledge of roofing materials, installation techniques, and industry best practices., • Proficient in project management software and tools (e.g., MS Project, Procore) as well as Microsoft Office Suite., • Excellent leadership, organizational, and communication skills., • Demonstrated ability to manage multiple projects concurrently under tight deadlines., • Experience managing customer expectations., • Excellent communication skills, both written and verbal, with the ability to communicate effectively with clients, subcontractors, and team members., • Must be comfortable working at heights and capable of safely using ladders and other elevated access equipment. Work Environment: • Combination of office-based work and on-site supervision under varying weather conditions., • Occasional overtime or weekend work may be required to meet project deadlines. Preferred Skills & Certifications: • Bachelor’s degree in Construction Management, Engineering, or a related field, or equivalent work experience., • OSHA 10 or 30 certified, • Bilingual fluency in English and Spanish is preferred Additional Information: This job description is not intended to be an exhaustive list of all responsibilities, duties, or qualifications. Additional tasks may be assigned as needed to support business objectives. Why Join Eskola, LLC? At Eskola, LLC, we take pride in delivering top-tier commercial roofing services while cultivating a culture of excellence, integrity, and continuous learning. As a valued member of our Commercial Roofing team, you will enjoy: • Competitive salary and comprehensive benefits., • Opportunities for advancement and career development., • Company-provided iPhone, computer, and tablet with modern software tools., • Ongoing trade-specific training and professional growth support., • A strong support team with deep technical and operational experience. Eskola, LLC is an Equal Opportunity Employer. Females, minorities, veterans, and individuals with disabilities are encouraged to apply. About Eskola, LLC: Founded in 1972, Eskola, LLC has built a legacy of quality and professionalism in commercial and industrial roofing across the North and Southeastern U.S. With hundreds of successful installations and a growing footprint, we continue to expand while staying rooted in safety, customer service, and excellence in workmanship.

Job DescriptionDescription: Why We Are Successful: We value people and relationships. Denark has been a successful Construction Manager & General Contractor for nearly 40 years. We specialize in various high-profile, complicated, and rewarding commercial construction projects. We enjoy the trust and confidence of many repeat clients and an excellent reputation in the industry and community, which undoubtedly starts with our team. Your Potential Role: Denark has an opening for an experienced Project Superintendent, who will provide overall field management and administration to field employees, subcontractors and suppliers. · Oversees total project field effort to ensure the highest quality, appropriate personnel, budget and schedule are met. · Ensure all company, department, and technical policies, procedures, standards, etc. are adhered to. · Interpret policies as required. · Assists with implementation and interpretation of safety programs. Assists in the development of supervision training programs. · Schedules, coordinates and supervises employees, subcontractors and all construction equipment on assigned project(s). · Initiates work schedules for maximum productivity of work. · Reviews drawings and specifications routinely. · Ensures subcontractors and suppliers are complying to specifications and codes. · Documents changes made by the architect/owner and gets approval from project manager on a timely basis. · Schedules all inspections and coordinates testing as required. · Acts as the main safety representative on assigned projects. · Reports all accidents and initiates first-report paperwork. · Attend company training/seminars as required by supervisor. · Assists Senior Project Superintendent in development of the construction schedule. · Solicits potential future employees through contacts in the industry. · Reviews construction schedule, Pay Requests and job cost reports with Project Manager. · Sets up job trailer including; temporary power, telephone, toilet, dumpster and water. · Schedules materials and suppliers. · Reports the need for a change in manpower requirements in complying with established schedules. · Performs initial screening for prospective field employees when requested by the Senior Project Superintendent. · Perform additional assignments per supervisor’s direction. Requirements: Your Credentials & Skill Set: · Minimum five years’ experience in the construction industry. · Previous Foreman/Assistant Superintendent for at least two years on a continuous basis. · Has successfully completed projects up to $2 million as the Project Superintendent. · Excellent communication, supervisory and planning skills required. To learn more about who we are and to apply, please visit www.denark.com/careers. EOE and Drug-Free Workplace