Trabajos Engineering en Massapequa, New YorkCrear alertasJornada completa

Our campus is a hub for engineering excellence, where we tackle some of the world's most challenging engineering problems. Advanced degree from an accredited college in a related discipline such as Engineering, Computer Science, Mathematics or Physics. Systems Engineering: System Architecture.

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionRF Engineering Technician (Electronics Repair) 📍 Onsite | Manufacturing Environment 💰 $60,000 – $90,000 + Bonus Potential Overview We are seeking a hands-on RF Engineering Technician to support the repair, troubleshooting, and testing of complex electronic and RF equipment. This role is ideal for someone who enjoys bench-level work, solving technical problems, and working closely with engineering and production teams in a fast-paced manufacturing environment. Key Responsibilities • Troubleshoot and repair RF and electronic equipment down to the component level, • Diagnose operational failures using oscilloscopes, multimeters, and other test equipment, • Repair and test printed circuit boards, amplifiers, multiplexing systems, and related components, • Align, calibrate, and adjust equipment per engineering specifications and documented procedures, • Replace or reconstruct defective electronic and mechanical components, • Review and apply engineering change notices (ECNs), • Perform functional and performance testing to ensure equipment meets required standards, • Maintain detailed records of repairs, calibrations, and test results in a database system, • Support investigations and collaborate with Production, Test, Engineering, and Field Service teams, • Assist with additional technical tasks as neededRequired Qualifications, • Associate’s or Bachelor’s degree in Electronics, Electrical Engineering, or related field (or equivalent hands-on experience), • 1–3 years of experience in electronics or RF repair / test technician roles, • Strong troubleshooting skills with electronic components and circuits, • Experience working with:, • Oscilloscopes, • Multimeters, • RF / microwave (MW) systems, • Ability to perform component-level diagnostics and repair, • Comfortable using hand tools for mechanical and electronic work, • Strong attention to detail and documentation accuracyPreferred Qualifications, • Experience with RF and microwave systems, • Familiarity with test equipment and circuit testing methodologies, • Background working with:, • Printed circuit boards (PCBs), • Amplifiers, • Multiplexing systems, • Exposure to manufacturing or production environments, • Strong problem-solving mindset and willingness to learnWhy This Role, • Hands-on technical role with direct impact on product quality and performance, • Opportunity to work with advanced RF and electronic systems, • Collaborative team environment with training and mentorship, • Strong exposure to cross-functional engineering and production teams, • Competitive compensation + comprehensive benefits + bonus potentialWork Environment, • Onsite manufacturing floor with dedicated workbench setup, • Combination of bench repair, testing stations, and specialized test chambers, • Work closely with a lead technician and supervisor for support and development, • Structured schedule:, • 9/80 workweek (9-hour days, alternating Fridays off/shortened), • Bi-weekly payIdeal Candidate Profile You are a detail-oriented, hands-on technician who: • Enjoys troubleshooting and repairing electronic systems at the component level, • Is comfortable using test equipment and interpreting results, • Thrives in a team-oriented, fast-paced manufacturing environment, • Is eager to learn and build deeper expertise in RF systems and electronics, • Job Type & Location This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jul 25, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job DescriptionConfidential RF / Digital Electrical Engineer Confidential Client | Long Island, NY Area A growing technology and defense-focused engineering organization is seeking an RF / Digital Electrical Engineer to support the design, development, testing, and integration of advanced electronic systems. This position offers the opportunity to work on cutting-edge RF, microwave, digital, and embedded technologies in a collaborative engineering environment. Position Overview The RF / Digital Electrical Engineer will be responsible for the design, analysis, development, and testing of RF and digital electronic circuits and systems. The role requires a hands-on engineer who can take products from concept through prototype, test, and production while supporting multidisciplinary engineering teams. Key Responsibilities • Design, analyze, and develop RF, microwave, and digital electronic circuits and subsystems., • Perform circuit modeling, simulation, optimization, testing, and troubleshooting., • Develop schematics, wiring diagrams, and technical documentation., • Support hardware integration, breadboard development, debugging, and verification testing., • Plan and execute laboratory testing, evaluate performance results, and implement design improvements., • Collaborate with engineering technicians, designers, and cross-functional teams throughout product development., • Assist with component selection, specialized test equipment procurement, and engineering evaluations., • Generate technical reports, specifications, and supporting engineering documentation., • Contribute to proposal efforts, technical bids, and customer-driven development projects., • Utilize computer-aided engineering (CAE) and simulation tools to support product design and analysis.Required Qualifications, • Bachelor's degree in Electrical Engineering (BSEE) or related discipline., • Minimum of 3-5 years of experience in RF, microwave, digital, or embedded systems engineering., • Experience designing, developing, analyzing, and testing electronic hardware and systems., • Strong understanding of RF and microwave circuit design principles., • Experience with circuit modeling, simulation, tuning, optimization, and performance validation., • Knowledge of amplifier design using packaged components and/or bare die technologies., • Experience with embedded hardware and software development., • Proficiency in C and/or C++ programming., • Familiarity with Real-Time Operating Systems (RTOS)., • Experience working with Microchip PIC microcontrollers or similar embedded platforms., • FPGA development experience using Verilog and/or VHDL., • Familiarity with Xilinx FPGA devices and associated development tools., • Strong troubleshooting, laboratory testing, and system integration skills., • Excellent verbal, written, and technical documentation skills.Preferred Qualifications, • Experience developing products for aerospace, defense, communications, radar, or similar high-reliability industries., • Experience with mixed-signal electronics and embedded system integration., • Knowledge of RF testing equipment, signal analysis, and system-level debugging., • Experience supporting products from concept through production release., • Ability to work collaboratively in a fast-paced engineering environment.Compensation & Benefits, • Competitive base salary commensurate with experience., • Comprehensive medical, dental, and vision benefits., • 401(k) retirement savings program., • Paid time off and company holidays., • Professional development and training opportunities., • Career advancement potential within a growing engineering organization.Why Consider This Opportunity?, • Work on advanced RF, microwave, digital, and embedded technologies., • Join a highly collaborative engineering team focused on innovation., • Contribute to the development of complex electronic systems supporting mission-critical applications., • Gain exposure to the full product lifecycle from concept through production.Candidates with experience in RF design, embedded systems, FPGA development, and advanced electronic hardware are strongly encouraged to apply. In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $95k-$125k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $95,000.00 to $125,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Building People, LLC, has a position open for an experienced Senior Building Automation Specialist. BAS technicians support a building’s management, tenants, and systems by managing BAS equipment and technologies. A BAS technician’s primary duties include: • Monitoring BAS components for HVAC, plumbing, electricity, computer networking, lighting, and security., • Working with building managers, tenants, and visitors to provide a safe and comfortable experience inside the building., • Working with architects, engineers, contractors, and other professionals to maintain or expand the building’s features and capacities., • Collaborating with BAS vendors and solution to use the data from BAS components to improve a building’s performance or reduce its operating cost., • Perform Preventative Maintenance and Commissioning tests on complete automation systems., • Make recommendations for systems upgrades and efficiency of operations. Required Experience & Skills • Extensive knowledge of multiple brands of manufactures of Building Automation Hardware and Software., • 5 years Tridium Niagara integration experience., • 5 years hands on troubleshooting and diagnostics of proprietary and non-proprietary control systems., • Recent experience working on US Federal Properties, Projects, and systems., • Troubleshooting, testing, and repairing/replacing automation equipment that manages a building’s comfort, efficiency, and safety., • Troubleshooting electrical control signals to verify operations., • Troubleshooting programming via computer control software to verify proper operations., • Extensive knowledge of HVAC operations and systems., • Ability to pass 7-year background investigation for access to US Federal Owned facilities, Property and Systems. Preferred Education • Any Manufacture of Building Automation Controls Training Certification., • Niagara Certification preferred., • Any HVAC training/certifications.

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. TRAVEL REQUIRED Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications (Preferred): • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc., • Six Sigma Green Belt or Black Belt Certification. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-105,000 Annually. Please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bG0xIH5Pqj

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Job Description: Haider Engineering P.C., a rapidly expanding REI firm, needs Chief Inspector in the Nassau and Suffolk Counties for NYSDOT highway and bridge projects. NOTE: The work is spread all over Long Island. The job location in the listing is only for reference. Duties and Qualifications: • NICET III (or equivalent), • OSHA 10hr certification (preferred), • NYSDOT experience (preferred)We offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. Please contact for more details. Haider Engineering P.C. is an Equal Opportunity Employer.

Job DescriptionJob Description: Haider Engineering P.C. is seeking motivated Mechanical Engineers (PE and non-PE) to join our team on a high-profile project with the New York City School Construction Authority (NYCSCA). This unique opportunity allows you to work directly within school facilities across all five boroughs, evaluating building conditions that help guide critical maintenance, repair, and capital improvement decisions. Whether you're an experienced engineer or looking to expand your skills in facility assessments, we provide paid training, professional development, and the chance to contribute to the safety and functionality of New York City's educational infrastructure. NOTE: The job location field is a placeholder. The project location is in all five boroughs of New York City. Duties: • Conduct visual inspections of school building systems and components using proprietary mobile applications on a company-issued iPad., • Prepare and submit daily reports detailing the condition of school facilities., • Collect data on completed building improvements and upgrades through coordination with school personnel, including custodial engineers and principals., • Accurately document and report deficiencies, including precise quantity counts., • Generate and issue “Priority Condition Reports” for any identified life safety or hazardous conditions., • Collaborate as part of a four-person inspection team on a daily basis., • Report to assigned school buildings by 8:30 AM each day, regardless of weather conditions.Qualifications:, • Strong knowledge of mechanical systems, including boilers, heating, and plumbing components., • Bachelor’s degree in Engineering or a related field.We offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. At Haider Engineering P.C., you'll play an important role in helping maintain and improve the facilities where millions of students learn and grow. If you're looking for a rewarding engineering position that combines fieldwork, teamwork, and public impact, we'd love to hear from you. Apply today and help build a safer, stronger future for New York City's schools. About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Haider Engineering P.C. is an Equal Opportunity Employer.

Job Description The Company Friedman Vartolo LLP is a fast-growing, New York-based law firm specializing in real estate and default services, with over 300 employees providing top-tier legal services to our clients in seven states. While our legal expertise sets us apart, it's our mindset that drives us forward. We bring a fresh, fast-paced energy that drives our momentum and shapes how we approach every challenge. We are a company that chooses to dig deeper, solving problems at the root instead of settling for surface fixes. Here, there are no passengers because every individual adds value, owns outcomes, and moves the firm forward. With an underdog mentality, we embrace constant elevation, always sharpening, always climbing, and never coasting. When challenges come, we row together and lean in as one team to get the job done, no matter what. The Position We are seeking a Production Reliability Engineer to own the operational health of our deployed internal application portfolio. The portfolio is growing rapidly - many new applications shipping every week - and we need a dedicated owner ensuring that what we deploy stays reliable, secure, and performant over its lifetime, and that the operational footprint stays manageable as the portfolio grows. This is a hands-on role for an engineer who thinks systematically about reliability, communicates clearly during incidents, and knows when to retire a deployed application that has outlived its usefulness. You will be the source of truth for "is our portfolio healthy" and the decision-maker on what gets maintained, what gets fixed, and what gets retired. You will work closely with the Senior Technology Manager, a DevOps Engineer (counterpart role), and a group of Production Engineers who own initial deployment and 30-day iteration of each application. Key Responsibilities: • Own the operational health of the firm's deployed internal application portfolio, • Lead incident response for production issues; serve as on-call rotation lead, • Manage security patching, dependency updates, base image refreshes, and certificate rotation across the deployed portfolio, • Conduct monthly triage of every deployed application - usage levels, error rates, security posture, retire/keep recommendation, • Maintain the application retirement queue and drive retire/deprecate decisions for low-usage or obsolete applications, • Define and track Service Level Objectives (SLOs) for application uptime, performance, and reliability, • Partner with the DevOps Engineer to ensure deployment pipelines incorporate reliability requirements from day one, • Produce a weekly portfolio health report - uptime trends, open incidents, security posture, retire/deprecate decisions, • Conduct incident postmortems and drive remediation actions to completion, • Contribute to security and compliance posture work (SOC2 readiness, Vanta evidence collection) as it relates to operational reliability Required Skills & Qualifications: • 5+ years professional experience in Site Reliability Engineering, DevOps, production engineering, or equivalent, • Strong incident-response experience - leading incidents, not just participating; comfortable owning the on-call rotation, • Experience defining and tracking SLOs and error budgets for production systems, • Strong Azure cloud experience (or directly comparable AWS / GCP experience), • Hands-on experience with monitoring, alerting, and observability tooling (Azure Monitor, Application Insights, Datadog, New Relic, or equivalent), • Comfortable reading code in multiple languages (TypeScript, Python, C# preferred) for incident triage and root-cause analysis, • Understanding of cloud security fundamentals - patching cadence, dependency management, secret rotation, base image hygiene, • Excellent written communication for incident comms, postmortems, and portfolio reporting Preferred Skills & Qualifications • Experience managing a portfolio of small-to-medium applications, rather than a single monolith, • Experience with security tooling (Huntress, Microsoft Defender, Vanta, similar), • Familiarity with Databricks, data warehouses, or analytics platforms, • Experience driving retire/deprecate decisions and the conversations that accompany them, • Experience in regulated industries (legal, financial services, healthcare), • Familiarity with compliance frameworks (SOC2, ISO 27001) from an operational-evidence perspective Benefits Friedman Vartolo LLP is proud to offer a comprehensive and competitive benefits package designed to support the well-being and security of our team. Our benefits include: • Paid parental leave options, • Short and long-term disability leave options, • Comprehensive medical, dental, and vision insurance, • Flexible Spending Accounts (FSA) and Dependent Care plans, • Commuter benefits including transit, and parking options, • Pet insurance to help care for your furry family members, • 401(k) retirement plans with employer contributions, • Gym and fitness reimbursements to support a healthy lifestyle, • Annual business expense reimbursements for attorneys, • Annual $500 travel budget to attend firm sponsored social events, • Hybrid work flexibility available after 90 days of employment * *Dependent upon specific position requirements and firm business needs Equal Opportunity Employer Friedman Vartolo LLP is an equal opportunity employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. ADA Compliance Friedman Vartolo LLP is committed to providing equal employment opportunities and complying with the Americans with Disabilities Act (ADA). We will provide reasonable accommodations to qualified applicants and candidates with disabilities, unless doing so would impose an undue hardship. If you require a reasonable accommodation to complete your application, participate in a job interview, or take part in any stage of the hiring process, please contact our Recruitment Team at recruitment@friedmanvartolo.com. Job Posted by ApplicantPro

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Manufacturing Engineer d evelop, implement and maintain manufacturing processes required to meet business needs for existing and new products. Utilize and support individual, team and quality/process improvement efforts to assure manufacturing processes meet requirements for process capability, safety, customer service and reliability. **Key Responsibilities: · Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation. · Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency. · Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production. · Maintain process documentation in accordance with established standards. · Establish and maintain preventive maintenance schedules for all processes and equipment. · Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost. · Present process concepts, implement approved solutions, and manage work to schedule and budget expectations. · Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability. · Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls. · Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance · Monitor production quality and ensure processes consistently meet required quality standards. · Troubleshoot and resolve production-related engineering issues. · Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability · Other duties as assigned **Education: ¨NBSP; **Bachelor’s Degree in Mechanical/Manufacturing or Electrical Engineering is required Experience: · 4 plus years of experience in a manufacturing engineering capacity · Metal fabrication experience is preferred **Skills/Knowledge/Abilities: · Effective communication skills both verbal and written are required · Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities · Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload · Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively · Must be highly collaborative and able to work in a team-based environment · Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners · Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions · Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems · Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information · Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work · Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Bilingual (English/Spanish) – needed You should be proficient in: • Industrial and Manufacturing Engineering, • Mechanical Troubleshooting Skills, • Mechanical Design & Engineering, • Engineering Degree, • metal fabrication

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • Tool Reimbursement, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement, • A chance to work for the best in the business Job Type: Full Time Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Technician. This individual will be responsible for the effective diagnosis and repair of engine components including small engines, agricultural equipment, and other equipment sold in the market area. Their work must be completed safely, professionally, and in a timely manner. If you’re the kind of person who strives to do great work, excels in creative team environments, and lives for problem-solving this is the place for you. What You’ll Do • The successful candidate will perform complex diagnostics, service repairs, and maintenance work on customer and/or dealer-owned equipment., • Work must be completed at high levels of quality and safety., • Daily duties will include some customer contact, diagnosing, troubleshooting using diagnostic tools, and making repairs.Requirements:, • Must own and maintain their own tools (specialty tools provided by dealership), • Basic computer skills, • Ability to assemble and perform maintenance functions, • Able to work a varying work schedule/shift and be flexible to respond to after-hour calls, • Strong customer service skills, • Excellent oral communication and written skills, • Strong organizational skills Preferred • A minimum of 2-3 years’ experience as a mechanic working on small engines, diesel and gas engines, and small handheld components, • Experience with John Deere Equipment Education • High school diploma or GED Physical Requirements The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionDescription: The candidate will support the electrical design and test of Rate and Rate Integrating Gyroscopes. This will include the design of electrical gyroscope components such as motors, pickoffs and torquers, as well as custom built test fixtures and test harnesses. In addition, the candidate will assist in the design of tests and provide analytical support for testing Rate and Rate Integrating Gyroscopes, including Acceptance Test Procedures (ATP), scale factor, transfer function, drift, alignment, and 1st and 2nd order system stability characteristics (gain/phase analysis), etc. EDUCATION: Minimum 4-year degree in electrical or electronics engineering, or other technical degree with appropriate work history or background. EXPERIENCE: 5+ years dealing with four or more of the following: Electronic product or component design and/or analysis Basic understanding of 1st or 2nd order control systems (servo systems, spring/mass/damper) Electronics systems (amplifiers, power supplies, demodulators, signal conditioning, filters) Electromechanical, mechanical, or electromagnetic systems Engineered (specialized) products to customer/government specifications Custom (product specific) Test systems Environmental testing (temperature, shock, vibration as a minimum) Hands-on design, test, and troubleshooting experience required SKILLS: Required skill set shall include as a minimum: Can interpret, digest, and produce technical specifications and procedures Computer literacy Excellent communications, presentation, and written skills, including customer facing Analytical (math) modeling capability, 1st and 2nd order systems Electrical test equipment operation skills, e.g.; DVM, oscilloscope, signal generator PC Board design Analog circuit design and component selection Servo (control system) analysis, and system design (1st and 2nd order systems), gain/phase analysis Additional skills desirable: Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment Microcontroller/microprocessor based digital and/or mixed signal circuit and system design Magnetic circuit analysis and design capability Basic mechanical instruments skills, e.g.; micrometers, calipers, dial indicators, precision levels An outstanding self-starter with a can-do attitude willing to go above and beyond the normal Requirements:

Job Description Job Title: Test Engineer Job Description This Test Engineer role focuses on planning, executing, and documenting electrical and EMI/EMC tests for aerospace and related applications. You will develop detailed test plans and procedures, coordinate and run tests at local laboratories, and ensure compliance with standards such as DO-160, MIL-STD-704, and MIL-STD-461. The position offers the opportunity to work in an engineering-oriented, employee-owned company that designs and manufactures high-quality ice protection and temperature control systems for aerospace, industrial, and transit markets. Responsibilities • Create comprehensive test plans, test procedures, and test reports for electrical and EMI/EMC testing activities., • Schedule tests with local test laboratories and coordinate all logistical details to ensure timely completion., • Run tests at local labs, operate test equipment, and ensure that all tests follow defined procedures and applicable standards., • Perform troubleshooting and testing to DO-160, MIL-STD-704, and MIL-STD-461 requirements for aerospace and military systems., • Conduct EMI/EMC testing, including test setup, execution, monitoring, and documentation of results., • Use oscilloscopes, multimeters, power supplies, function generators, and other test equipment to verify and validate system performance., • Read and interpret electrical schematics and blueprints to support test development, execution, and troubleshooting., • Develop and refine test methods and test setups to improve accuracy, repeatability, and efficiency of testing., • Accurately and clearly fill out data sheets, record test measurements, and maintain detailed test logs., • Write up non-conformance reports, document test failures, and support root-cause analysis and corrective actions., • Document test results in formal reports and communicate findings to engineering and project teams., • Collaborate with electrical engineers, technicians, and other stakeholders to ensure test coverage meets design and regulatory requirements., • Ensure all testing activities comply with internal procedures, customer specifications, and applicable aerospace and military standards. Essential Skills • Bachelor of Science in Electrical Engineering (BSEE)., • At least 3 years of experience working as a Test Engineer in an aerospace company or in the military (full time or reservist)., • Hands-on experience creating test plans, test procedures, and test reports., • Proven experience scheduling and running tests at external or local test laboratories., • Strong background in EMI/EMC testing, including practical experience with EMI/EMC test setups and execution., • Experience troubleshooting and testing to DO-160, MIL-STD-704, and MIL-STD-461 standards., • Proficiency using test equipment such as oscilloscopes, multimeters, power supplies, and function generators., • Ability to read and interpret electrical schematics, electrical circuits, and blueprints., • Demonstrated electrical technician and test engineering skills, including hands-on troubleshooting of electrical systems., • Ability to accurately and clearly fill out data sheets and maintain detailed test documentation., • Capability to write clear non-conformance reports for internal records., • Strong attention to detail, with the ability to document results thoroughly and consistently., • Effective communication skills to interact with engineers, technicians, and external lab personnel. Additional Skills & Qualifications • Experience working with aerospace systems, ice protection systems, or temperature control systems., • background in military environments, either as a full-time or reservist Test Engineer., • Experience in test development for new products and systems., • Familiarity with industrial and transit applications that require high-reliability electrical systems., • Comfort working in an employee-owned environment with a strong culture of shared responsibility and ownership., • Ability to work independently and manage multiple test schedules and priorities., • Strong analytical and problem-solving skills to support root-cause analysis and corrective actions. The work environment emphasizes collaboration, professional growth, and long-term stability, with benefits that include a 401(k) plan, full medical coverage, commutation assistance, and tuition support. The company promotes a positive culture with annual family events and picnics, flexible working schedules, and shuttle service to and from the Hicksville train station, along with assistance for train costs for those commuting from the city. Salaried employees benefit from a straight-time overtime policy. The facility supports a professional yet approachable atmosphere, focused on safety, quality, and continuous improvement. Job Type & Location This is a Contract to Hire position based out of Plainview, NY. Pay and Benefits The pay range for this position is $33.00 - $43.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Plainview,NY. Application Deadline This position is anticipated to close on Jul 25, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: Cox & Company solves the aerospace industry's most challenging ice protection and temperature control problems. For over 80 years Cox has worked with OEMs, Tier 1 and Tier 2 Suppliers, as well as all major modification and finishing centers throughout the world. From initial design concepts through aircraft integration and operation, our company provides the highest quality full-lifecycle support to our customers. Cox & Company, Inc. is seeking a Test Engineer with comprehensive knowledge of aerospace industry testing standards to lead product qualification efforts. The ideal candidate will be responsible for developing formal test engineering procedures and coordinating and conducting qualification tests at certified external laboratories. Technical expertise must span electromagnetic interference (EMI) testing, including radiated and conducted emissions, susceptibility, and pin injection, as well as electrical power quality, transients, and environmental testing such as temperature, shock, and vibration. Requirements: Role and Responsibilities • Develop detailed test plans and procedures in accordance with RTCA DO-160, MIL-STD-810, MIL-STD-704, and MIL-STD-461 requirements., • Define and specify necessary support equipment, including wiring harnesses, electrical interfaces, vibration fixtures, instrumentation, and test setup diagrams., • Plan, conduct, and evaluate internal risk-reduction tests at Cox and Company., • Collect, analyze, and organize testing data to generate comprehensive Qualification Test Reports for customers and management., • Provide regular testing status updates to Engineering Managers and Program Managers., • Coordinate test schedules with certified external laboratories and manage customer test witnessing., • Supervise testing at external laboratories while maintaining accurate, detailed activity logs. Required Skills • Test Equipment Proficiency: Expert level operating spectrum analyzers, EMI receivers, programmable power quality supplies, pin injection generators, data loggers, oscilloscopes, and digital multimeters (DMMs)., • EMI/EMC Principles: Deep technical understanding of conducted and radiated emissions, as well as RF susceptibility and immunity testing., • RF & Coupling Hardware: Practical knowledge of EMI test antennas (rod, biconical, double-ridged horn, magnetic loop) and injection transformers used for conductive susceptibility testing., • Test Chamber Setup: Proven ability to configure complex EMI and environmental test setups, including semi-anechoic chambers, thermal chambers, and vibration shakers., • Automation Software: Familiarity with automated EMC test software suites (e.g., TILE, EMC32, or LabWindows/CVI) is highly desirable., • Hardware Prototyping: Strong hands-on mechanical and electrical skills, including wire crimping, component soldering, and test fixture assembly. Qualifications and Education Requirements • Bachelor’s degree in Electrical Engineering (is a plus)., • Minimum of five years of related experience required. Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • Must be able to traverse production facility.

Job DescriptionDescription: JOB TITLE: Quality Engineer Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment in innovation, quality, and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Quality Engineer to join our dynamic team and continue our mission of excellence. Job Summary: In this role, you will be responsible for ensuring safety and quality of our products and procedures through rigorous inspections, implementations of quality measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building a high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering and/or quality assurance, exceptional attention to detail and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of the Quality team. Key responsibilities: · Set detailed guidelines on what needs to be checked and what the quality standards are. · Audit our systems based on ISO 9001: 2015 requirements. · Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible. · Inspect product materials and PCB for defects and durability. · Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order) · Review current blueprints and quality documentation · Work with internal teams to increase customer satisfaction by improving the quality of products. Required Qualifications: · Previous work experience as a Quality Engineer, Manufacturing Engineer, or similar role. · In-depth understanding of technical documentation · Able to create a technical document · Working knowledge of RCCA practice · Familiar with IPC610 and J-STD · Familiarity with statistical analysis · Great attention to detail and problem-solving abilities · Team Spirit · Great analytical skills · BSc in Mechanical Engineering, Industrial Engineering, or relevant field. (years of experience will be taken into consideration as a substitute for a BSc) · Additional certification in Quality Assurance is a plus. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description GREAT OPPORTUNITY!!! ADE Systems, Inc. is one of the largest HVAC manufacturer’s representatives in the New York Metro and Northern New Jersey area who is seeking Entry level individuals with a technical/engineering background to join our growing team in our Freeport, NY office. Candidates will have the opportunity to use their engineering skillset to contribute to our Engineered Solutions Sales Team. Responsibilities • Reading and understanding mechanical drawings, • Ability to grasp an in depth knowledge of the products ADE represents, • Supply technical support either internally or externally, • Use of computer programs to complete processes, such as orders or quantitative take-offs Qualifications • Bachelor's Degree in Mechanical Engineering from four-year college or university, or one to two years of related experience and/or training, or equivalent combination of education and experience., • Written and verbal communication skills, • Computer skills preferred: Bluebeam, Ordering systems, Microsoft Outlook, Enterprise Resource Planning Software (Microsoft Navision) Salary & Benefits Overview • Opportunity for advancement., • Excellent benefits program including medical, dental, 401k, vacation, paid holidays., • Product training and support provided – in house and factory training., • Salary range based on experience. To learn more about our company and some of the products we represent please visit www.adehvac.com Company DescriptionThe Premier Manufacturers Representative of HVAC Products. For over 50 years, our reputation of excellence in the contracting, engineering and architectural communities, enables us to satisfy and exceed all of your HVAC needs. Air distribution, fan applications, air handling units, fan coils, VFDs, electric heat, humidification, and so much more. We have the knowledge and products to solve your HVAC problems.The Premier Manufacturers Representative of HVAC Products. For over 50 years, our reputation of excellence in the contracting, engineering and architectural communities, enables us to satisfy and exceed all of your HVAC needs. Air distribution, fan applications, air handling units, fan coils, VFDs, electric heat, humidification, and so much more. We have the knowledge and products to solve your HVAC problems.

Job DescriptionFull Job Description: Company Description: RLM Engineering is a full-service mechanical, electrical, plumbing and fire sprinkler design firm. The firm is focused on the building retrofit market in the NYC and Long Island area. RLM Engineering is seeking an electrical engineer with experience in tenant fit-out, electrical upgrades, electrical infrastructure design and fire alarm systems for a wide variety of building/facility renovation projects. This position will entail designing building systems and tenant spaces based on client’s needs. In addition to engineering design, duties will include writing specifications; CAD drafting; coordinating with other trades, performing site visits to client facilities; and coordinating with clients, sub-consultants, and regulatory agencies. Good communicator that will be capable of working face to face with clients daily. Ability to manage engineering design projects to provide a quality product for the client. Experience with AutoCAD and REVIT is required. We offer a work environment that rewards self-starters who manage and execute projects independently as well as competitive salaries, benefits, and opportunities for individuals to grow their engineering practices. Experience Required: • Bachelors Degree in Electrical Engineering or Equivalent., • 4+ years of Electrical Industry Experience., • Full-time in office position., • PE license preferred Benefits: • 401(k) retirement plan., • Health insurance., • Paid time off.

Job DescriptionJob Description: Haider Engineering P.C. is seeking motivated Electrical Engineers (PE and non-PE) to join our team on a high-profile project with the New York City School Construction Authority (NYCSCA). This unique opportunity allows you to work directly within school facilities across all five boroughs, evaluating building conditions that help guide critical maintenance, repair, and capital improvement decisions. Whether you're an experienced engineer or looking to expand your skills in facility assessments, we provide paid training, professional development, and the chance to contribute to the safety and functionality of New York City's educational infrastructure. NOTE: The job location field is a placeholder. The project location is in all five boroughs of New York City. Duties: • Conduct visual inspections of school building systems and components using proprietary mobile applications on a company-issued iPad., • Prepare and submit daily reports detailing the condition of school facilities., • Collect data on completed building improvements and upgrades through coordination with school personnel, including custodial engineers and principals., • Accurately document and report deficiencies, including precise quantity counts., • Generate and issue “Priority Condition Reports” for any identified life safety or hazardous conditions., • Collaborate as part of a four-person inspection team on a daily basis., • Report to assigned school buildings by 8:30 AM each day, regardless of weather conditions.Qualifications:, • Solid understanding of electrical systems, including lighting, sound, and fire alarm components., • Bachelor’s degree in Engineering or a related field.We offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. At Haider Engineering P.C., you'll play an important role in helping maintain and improve the facilities where millions of students learn and grow. If you're looking for a rewarding engineering position that combines fieldwork, teamwork, and public impact, we'd love to hear from you. Apply today and help build a safer, stronger future for New York City's schools. About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Haider Engineering P.C. is an Equal Opportunity Employer.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description Hazen and Sawyer is seeking an experienced Principal Architect to lead architectural design efforts across our Northeast Region and support the expanding needs of our clients in the water and wastewater sector. In this architectural leadership role, you will guide and elevate the architectural components of multidisciplinary project teams—overseeing design quality, technical rigor, and integration—while contributing to the planning, design, permitting, and construction of facilities that support and protect critical water infrastructure. The Principal Architect will oversee a diverse portfolio of projects within the “water space,” including but not limited to: • Drinking water and wastewater treatment facilities, • Water resource and conveyance structures, • Associated buildings such as administrative spaces, laboratories, and operational support facilities, • Renovation, rehabilitation, and historic restoration of existing facilities and structures You will play a key role in shaping design strategy, elevating architectural excellence, and ensuring successful project delivery from concept through construction. A sample of Hazen’s Architectural Design can be viewed on our website: Hazen and Sawyer | Architectural Design Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Our Architectural group delivers the personalized service of a small studio backed by the deep resources of a full-service, multidisciplinary firm. Key Responsibilities: • Lead architectural design from schematic development through construction‑ready documents, ensuring precise technical detailing, appropriate material selection, construction sequencing, and high‑quality specifications., • Review, refine, and integrate architectural details to ensure constructability, clarity, durability, and full alignment with project goals and standards, • Collaborate with engineering, estimating, project management, and field staff to produce fully integrated and constructible designs., • Coordinate with consultants, AHJs, and code officials to ensure regulatory compliance with construction requirements., • Conduct existing conditions assessments and prepare design and technical reports for water and wastewater treatment projects., • Lead renovation, adaptive reuse, and historic restoration efforts, including evaluation of structural and architectural integrity, preservation of architectural features, and integration with modern building systems., • Perform construction administration tasks, including submittal review, responding to RFI’s, site inspections, and field clarifications., • Participate in cost estimating, scheduling, and value engineering efforts to improve constructability and project outcomes. Required Qualifications: • Bachelor of Architecture or BS in Architectural Technology degree from U.S. accredited university, • NYS Registered Architect or NCARB Certification, • 8-10 years of architectural experience with a strong emphasis on detailing and constructability for infrastructure or public works projects, • Demonstrated experience with public bid projects, including budget, schedule, and quality oversight., • Deep understanding of building systems integration (Architectural, Structural, MEP, Civil)., • Proven ability to develop technical, constructible details and understand construction methods and materials., • Proficiency with building codes, environmental regulations, and sustainable design principles., • Strong leadership skills and ability to coordinate effectively with multidisciplinary teams., • Excellent communication skills and ability to collaborate in a dynamic team environment. Preferred Qualifications: • Hands-on experience in construction administration and field coordination., • Ability to identify and resolve constructability and detailing issues early in design., • Strong technical writing and communication skills to clearly convey design intent., • Experience with building renovations, rehabilitations, or historic preservation projects., • Commitment to quality assurance, technical accuracy, and constructible solutions throughout all phases of a project. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location Please submit a resume and cover letter to be considered.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Garden City, NY, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply., • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Coordinate with field inspection staff and serve as an on-site project representative. Job Requirements • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Salary Range: $90,000 - $120,000 Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details: mpanter@bachrachgroup.com

Job Description Architects plan, develop and implement building designs. They compile feasibility reports, determine environmental impact, create project proposals, estimate costs, determine timelines and oversee construction processes.

Job Description The Project Engineer, with the assistance of the Project Team, coordinates all project activities to ensure cost, schedule, document control and quality standards are met. Under the direction of upper Management, the Project Engineer is expected to take on any/all tasks in the quest to learn the Electrical Construction Industry and the Company’s processes. Job Responsibilities: • Assisting with Design Work: Support more experienced engineers in designing electrical systems, components, etc. This may involve using software tools to create schematics, drawings, or models., • Documentation: Keeping accurate records and documentation is crucial in engineering. Engineers/apm responsible for documenting their work, writing reports, and maintaining records of design specifications and test results., • Collaboration: Engineers often collaborate with other engineers, and project personnel from different disciplines to complete projects and solve problems., • Learning and Professional Development: engineers spend time learning about the company's products, processes, and industry standards. They may also participate in training programs to enhance their technical skills and knowledge., • Fieldwork: Depending on the nature of the projects, engineers are required to visit job sites, participate in field installations, or assist in commissioning electrical systems., • Adhering to Codes and Standards: Engineers must familiarize themselves with relevant codes, standards, and regulations governing electrical design and installation to ensure that their work complies with legal and safety requirements., • Track Electrical installations and redline installation on field, • Continuous Improvement: Engineers are encouraged to seek feedback, learn from their experiences, and continuously improve their skills. They may be assigned mentors or supervisors who provide guidance and support in their professional development Qualifications: • Ability to work with a team., • Having organizational skills., • Ability to perform different tasks at the same time., • Having technical knowledge, • Ability to follow precise instructions., • Having IT skills with emphasis on Microsoft Office., • Being able to solve different types of problems., • Having good communication skills., • Being familiar with regulatory standards pertaining to the power industry., • 2D cad drawing Experience, • Familiar with NYC Electrical code, • Read and interpretate Electrical Drawings, • Create Excell spread sheets based off of schedule, • Excellent written and oral communication skills Education/Certifications • A College degree in Electrical Engineering required, • PMP certificate a plus, • SST certificate, • Osha certificate Advantages to Working at RMD Electric • Over 15 Years Owned and Operated, • Job training and mentorship, • Supportive Management Team, • Emphasis on professional development, employee satisfaction and work-life balance, • Competitive compensation packages, • Comprehensive benefits, • Paid holidays and vacation Benefits • 401(k) match, • Medical Insurance, • Vision insurance, • Dental Insurance, • Union shopCompany DescriptionRMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.RMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.

Job Description Pay: $65,000.00 - $75,000.00 per year Job description: Growing architecture firm seeks Jr Project Manager / Job Captain to be responsible for the objectives, requirements and budget of an architectural project. They motivate team members and provide progress updates. A Jr Project Manager / Job Captain is an experienced architectural draftsperson who runs projects from initial feasibility studies to handing over the certificate of occupancy to the owners. Duties: · May share the responsibilities of the same project with Senior Project Manager. · Punctual, professional demeanor, and ability to communicate effectively with team members. · Ultimately responsible for the drafting and completion of a project. · Ability to meet milestones laid out by project manager. · Attends client-consultants meetings and construction meetings with the general contractor. · Oversees the project from design documentation to completion of construction. · Proficient knowledge on how to put together a complete shell of a commercial building. · Proficient knowledge of the Building Code and ADA requirements for commercial uses. · Proficient understanding of the various agencies that may be required to obtain full permits to construct a commercial building inside and out. · Experience in Medical facilities beneficial, along with FGI guidelines for Outpatient Facilities, and Dept of Health Article 28 (Hospitals) regulations. Skills/Qualifications: · 5+ Years’ Experience · Proficient in AutoCAD · Experience in Procore and Sketchup is beneficial Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Ability to commute/relocate: • Rockville Centre, NY 11570: Reliably commute or planning to relocate before starting work (Required) Experience: • Architectural: 3 years (Required), • AutoCad: 1 year (Required), • ProCore/Sketchup: 1 year (Preferred) Work Location: In person Company DescriptionDESIGN BUILD FIRM; ARCHITECTURAL, CONSTRUCTION MANAGEMENT, PROPERTY MANAGEMENT FIRM.DESIGN BUILD FIRM; ARCHITECTURAL, CONSTRUCTION MANAGEMENT, PROPERTY MANAGEMENT FIRM.

Job DescriptionSenior Mechanical Engineer We are seeking a Senior Mechanical Engineer to join a growing engineering team responsible for the design, development, analysis, and validation of innovative electro-mechanical products. This position offers the opportunity to work on products from initial concept through manufacturing release while playing a key role in product innovation, technical leadership, and continuous improvement initiatives. The ideal candidate will bring strong experience with SolidWorks, injection molded plastics, sheet metal design, electro-mechanical packaging, and product development in a manufacturing environment. Location: Melville, NY Salary: $115,000 - $130,000 Key Responsibilities • Product Design & Development, • Lead the design, analysis, and development of mechanical components, assemblies, and systems from concept through production., • Create detailed assembly drawings, part drawings, and engineering documentation., • Develop and present multiple design concepts to engineering teams and stakeholders., • Design for manufacturability, assembly, reliability, and cost optimization., • Engineering Analysis & Validation, • Conduct FEA (Finite Element Analysis) and DFMEA/FMEA activities to improve product performance and reliability., • Develop and execute testing and validation plans., • Analyze product performance and implement design improvements., • Evaluate finished products to ensure compliance with specifications, quality standards, and customer requirements., • Documentation & Process Improvement, • Collaborate with Document Control to create and maintain:, • 2D drawings, • Bills of Materials (BOMs), • Engineering Change Orders (ECOs), • Engineering documentation packages, • Prepare engineering reports, performance analyses, and technical recommendations., • Continuously improve engineering processes, workflows, and design standards., • Manufacturing & Cross-Functional Support, • Partner with Manufacturing, Quality, and Engineering teams to support product releases and production activities., • Review fabrication, assembly, and installation processes to ensure successful product implementation., • Support troubleshooting, root cause analysis, and design optimization efforts., • Research emerging technologies and recommend new tools, processes, and design solutions., • Technical Leadership, • Mentor and support junior engineers., • Provide technical guidance and leadership on engineering projects., • Manage multiple projects and priorities while ensuring timely delivery of design objectives. Required Qualifications • Bachelor's Degree in Mechanical Engineering., • 5+ years of mechanical engineering experience., • Proficiency with SolidWorks for design and analysis., • Strong experience with:, • Mechanical design, • Injection molded plastic part design, • Sheet metal design, • Electro-mechanical packaging, • High-volume manufacturing environments, • Experience conducting:, • FEA (Finite Element Analysis), • DFMEA/FMEA, • Design Validation Testing, • Strong understanding of:, • GD&T, • Product lifecycle management, • Design for Manufacturability (DFM), • Engineering documentation and drafting standards Preferred Qualifications • Experience with PCB layout and electronics packaging., • Experience designing consumer products and electro-mechanical devices., • Knowledge of regulatory compliance and validation testing methods., • Experience supporting new product development from concept through production., • Strong background in automated and manual assembly processes. What We're Looking For • Strong design and analytical problem-solving skills., • Ability to take ownership of projects from concept through product launch., • Collaborative team player who enjoys working across multiple disciplines., • Passion for innovation, product development, and continuous improvement., • Technical leader who can mentor others while remaining hands-on in design and development activities. Why Join Us? • Growth & Advancement, • Strong opportunities for career advancement and leadership development., • Exposure to a variety of new product development projects., • Potential growth opportunities across multiple company locations nationwide., • Collaborative Engineering Culture, • Forward-thinking, employee-focused organization., • Innovative and progressive work environment., • Cross-functional collaboration with engineering, manufacturing, and quality teams., • Work Environment, • Modern Long Island engineering facility., • Flexible first-shift schedule (typically 9:00 AM – 5:00 PM)., • On-site cafeteria., • Supportive team environment focused on innovation and employee development.Job Type & Location This is a Permanent position based out of Melville, NY. Pay and Benefits The pay range for this position is $115000.00 - $130000.00/yr. Comprehensive benefits include: Medical, dental, and vision insurance programs 401K plans with employer-matching contributions Tuition reimbursement PTO Paid holidays Volunteer time off For more information about benefits, please go to: https://careers.leviton.com/benefits Workplace Type This is a fully onsite position in Melville,NY. Application Deadline This position is anticipated to close on Jul 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionSenior Quality Assurance Engineer Confidential Client | Long Island, NY Area A growing precision manufacturing organization serving highly regulated industries is seeking a Senior Quality Assurance Engineer to lead product and process quality initiatives from new product introduction through full-scale production. This role is ideal for a hands-on quality professional who thrives in a precision machining environment and enjoys partnering closely with manufacturing, engineering, operations, and supply chain teams to drive continuous improvement and customer satisfaction. Position Overview The Senior Quality Assurance Engineer will own quality planning, process controls, measurement systems, statistical analysis, nonconformance management, and regulatory compliance activities. This individual will serve as the primary quality resource on the manufacturing floor, helping ensure products meet stringent customer, industry, and regulatory requirements while reducing variation and improving process capability. Key Responsibilities Manufacturing & Shop Floor Quality • Serve as the primary quality resource for machinists, assemblers, and production teams., • Support first article inspections, production startups, process validations, and issue resolution., • Lead daily quality reviews, root cause investigations, containment activities, and corrective actions., • Train operators on inspection methods, SPC interpretation, measurement techniques, and quality procedures.Quality Planning & New Product Introduction, • Develop and maintain Control Plans, Inspection Plans, PFMEAs, and related quality documentation., • Support APQP, PPAP, and First Article Inspection (AS9102) activities., • Translate GD&T requirements into effective inspection and measurement strategies., • Drive traceability and quality requirements from customer specifications through production and final acceptance.Metrology & Measurement Systems, • Support advanced inspection technologies including CMMs, vision systems, laser scanning, and surface metrology equipment., • Perform Measurement System Analysis (MSA), Gage R&R studies, and capability assessments., • Maintain calibration programs and measurement system compliance.Process Control & Continuous Improvement, • Establish and maintain SPC programs for critical product characteristics., • Conduct capability studies and implement process improvement initiatives., • Lead root cause analysis, NCR/MRB activities, CAPA programs, and corrective action effectiveness verification., • Participate in Lean Manufacturing, Six Sigma, DOE, Kaizen, and mistake-proofing initiatives.Customer & Regulatory Quality, • Support customer audits, source inspections, complaint investigations, and quality reviews., • Maintain compliance with applicable quality management systems and regulatory requirements., • Ensure audit readiness and adherence to customer, industry, and internal quality standards.Required Qualifications, • Bachelor's degree in Mechanical, Manufacturing, Industrial, Materials Engineering, or a related technical discipline., • 5+ years of quality engineering experience within a precision machining or advanced manufacturing environment., • Experience supporting tight-tolerance CNC machining operations, including milling, turning, EDM, grinding, or similar processes., • Strong knowledge of:, • GD&T (ASME Y14.5), • SPC and capability studies, • MSA and Gage R&R, • PFMEA and Control Plans, • NCR, MRB, CAPA, and 8D methodologies, • PPAP and First Article Inspection processes, • Proficiency with statistical analysis software such as Minitab., • Experience working in regulated manufacturing environments such as aerospace, medical device, defense, or similar industries.Preferred Qualifications, • Six Sigma Green Belt or Black Belt certification., • ASQ Certified Quality Engineer (CQE) certification., • Internal auditing experience within AS9100 and/or ISO 13485 environments., • Experience with electronic QMS platforms and ERP-integrated quality systems., • Familiarity with Nadcap-controlled processes and supplier quality programs., • Experience supporting medical device, aerospace, or other highly regulated production environments.Compensation & Benefits, • Base salary: $85,000 - $110,000, depending on experience and qualifications., • Performance-based incentive opportunities., • Comprehensive medical, dental, and vision coverage., • 401(k) with company contributions., • Paid time off and holidays., • Tuition reimbursement and professional development support., • Additional employee wellness and benefit programs.Why Consider This Opportunity?, • Join a stable and growing precision manufacturing organization., • Work with complex, high-performance products serving regulated industries., • Be a key contributor to quality, operational excellence, and continuous improvement., • Enjoy strong growth potential within a collaborative engineering and manufacturing environment.In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $85k-$110k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $85,000.00 to $110,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Manufacturing Engineer develop, implement and maintain manufacturing processes required to meet business needs for existing and new products. Utilize and support individual, team and quality/process improvement efforts to assure manufacturing processes meet requirements for process capability, safety, customer service and reliability. Key Responsibilities: · Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation. · Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency. · Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production. · Maintain process documentation in accordance with established standards. · Establish and maintain preventive maintenance schedules for all processes and equipment. · Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost. · Present process concepts, implement approved solutions, and manage work to schedule and budget expectations. · Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability. · Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls. · Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance · Monitor production quality and ensure processes consistently meet required quality standards. · Troubleshoot and resolve production-related engineering issues. · Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability · Other duties as assigned Education: Bachelor’s Degree in Mechanical/Manufacturing or Electrical Engineering is required Experience: · 4 plus years of experience in a manufacturing engineering capacity · Metal fabrication experience is preferred Skills/Knowledge/Abilities: · Effective communication skills both verbal and written are required · Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities · Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload · Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively · Must be highly collaborative and able to work in a team-based environment · Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners · Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions · Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems · Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information · Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work · Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Bilingual (English/Spanish) – needed #2127OS

Job Description Express Employment Professionals-Farmingdale, NY is seeking an experienced Senior Control Systems Engineer to lead and manage our in‑house Control Panel Shop. This role requires strong technical expertise in industrial control panel design and fabrication, as well as the leadership skills needed to guide a team of technicians and collaborate with sales staff to support business growth. Key Responsibilities • Manage daily operations within the Control Panel Shop, ensuring efficient and high‑quality panel fabrication., • Design and draft small industrial control systems using AutoCAD Electrical, including schematics, panel layouts, bills of materials, and special details., • Select, specify, and procure all components required for control panel builds., • Partner with Sales to develop opportunities and drive panel shop revenue., • Program and configure Programmable Logic Controllers (PLCs), HMI interfaces, and Variable Frequency Drives (VFDs) for various control applications., • Conduct factory testing of controls and finished panels to ensure compliance with applicable standards., • Ensure all control panels meet UL 508A requirements; maintain strong working knowledge of UL compliance standards., • Provide technical support to customers—primarily over the phone, with occasional on‑site service when necessary., • Supervise, mentor, and support Panel Shop Technicians, fostering a collaborative and positive team environment., • Use Microsoft Office Suite (Word, Excel) for documentation and reporting., • Utilize SAP for sales, procurement, production orders, and inventory management (training provided if needed).Qualifications, • Bachelor’s degree in Engineering or equivalent design and industrial control experience., • Strong proficiency in AutoCAD Electrical for control system design., • Hands‑on experience designing, assembling, and testing industrial control panels., • Demonstrated ability to program PLCs and HMIs; experience with VFD setup and testing., • Familiarity with UL 508A standards and certified panel shop processes., • Excellent communication and leadership skills; ability to guide technicians and interact effectively with cross‑functional teams., • Proficiency with Microsoft Word and Excel., • Experience with SAP is helpful but not required (training available). #2127LI

Job DescriptionRF Engineering Technician (Electronics Repair) 📍 Onsite | Manufacturing Environment 💰 $60,000 – $90,000 + Bonus Potential Overview We are seeking a hands-on RF Engineering Technician to support the repair, troubleshooting, and testing of complex electronic and RF equipment. This role is ideal for someone who enjoys bench-level work, solving technical problems, and working closely with engineering and production teams in a fast-paced manufacturing environment. Key Responsibilities • Troubleshoot and repair RF and electronic equipment down to the component level, • Diagnose operational failures using oscilloscopes, multimeters, and other test equipment, • Repair and test printed circuit boards, amplifiers, multiplexing systems, and related components, • Align, calibrate, and adjust equipment per engineering specifications and documented procedures, • Replace or reconstruct defective electronic and mechanical components, • Review and apply engineering change notices (ECNs), • Perform functional and performance testing to ensure equipment meets required standards, • Maintain detailed records of repairs, calibrations, and test results in a database system, • Support investigations and collaborate with Production, Test, Engineering, and Field Service teams, • Assist with additional technical tasks as neededRequired Qualifications, • Associate’s or Bachelor’s degree in Electronics, Electrical Engineering, or related field (or equivalent hands-on experience), • 1–3 years of experience in electronics or RF repair / test technician roles, • Strong troubleshooting skills with electronic components and circuits, • Experience working with:, • Oscilloscopes, • Multimeters, • RF / microwave (MW) systems, • Ability to perform component-level diagnostics and repair, • Comfortable using hand tools for mechanical and electronic work, • Strong attention to detail and documentation accuracyPreferred Qualifications, • Experience with RF and microwave systems, • Familiarity with test equipment and circuit testing methodologies, • Background working with:, • Printed circuit boards (PCBs), • Amplifiers, • Multiplexing systems, • Exposure to manufacturing or production environments, • Strong problem-solving mindset and willingness to learnWhy This Role, • Hands-on technical role with direct impact on product quality and performance, • Opportunity to work with advanced RF and electronic systems, • Collaborative team environment with training and mentorship, • Strong exposure to cross-functional engineering and production teams, • Competitive compensation + comprehensive benefits + bonus potentialWork Environment, • Onsite manufacturing floor with dedicated workbench setup, • Combination of bench repair, testing stations, and specialized test chambers, • Work closely with a lead technician and supervisor for support and development, • Structured schedule:, • 9/80 workweek (9-hour days, alternating Fridays off/shortened), • Bi-weekly payIdeal Candidate Profile You are a detail-oriented, hands-on technician who: • Enjoys troubleshooting and repairing electronic systems at the component level, • Is comfortable using test equipment and interpreting results, • Thrives in a team-oriented, fast-paced manufacturing environment, • Is eager to learn and build deeper expertise in RF systems and electronics Job Type & Location This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jul 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionManufacturing Engineer - Electronics & PCB Assembly Confidential Client | Long Island, NY Area A growing manufacturer of complex electronic and electro-mechanical products is seeking a Manufacturing Engineer to support PCB assembly, RF manufacturing, process development, and continuous improvement initiatives. This hands-on role will work closely with Engineering, Production, Quality, and Operations teams to optimize manufacturing processes, improve product quality, and support new product introductions. Position Overview The Manufacturing Engineer will be responsible for developing manufacturing processes, assembly documentation, tooling, and production workflows for printed circuit board assemblies (PCBAs) and RF products. The ideal candidate will have strong experience with SMT processes, PCB assembly, manufacturing documentation, troubleshooting, and process improvement in a high-reliability manufacturing environment. Key Responsibilities • Develop assembly procedures, work instructions, fixtures, production routings, and manufacturing documentation to support efficient and repeatable production., • Create and maintain assembly guides, travelers, tooling documentation, and engineering change records (ECNs)., • Interpret and review engineering documentation including schematics, CAD models, Gerber files, assembly drawings, and bills of materials (BOMs)., • Support prototype and first-article builds, helping transition new products into production., • Develop, maintain, and optimize SMT programs, reflow oven profiles, and PCB panelization strategies., • Provide hands-on support for PCB assembly, RF assembly, and electro-mechanical manufacturing processes., • Troubleshoot manufacturing equipment and production issues, coordinating with equipment vendors when required., • Lead root cause investigations, corrective actions, and continuous improvement initiatives., • Provide Design for Manufacturability (DFM) feedback to engineering teams to improve product quality, reliability, and efficiency., • Participate in cost-reduction, workflow optimization, and manufacturing process improvement projects., • Support equipment maintenance programs and manufacturing process validation activities.Required Qualifications, • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, or a related technical discipline., • 4-6+ years of manufacturing engineering experience in electronics, PCB assembly, or electro-mechanical manufacturing environments., • Strong understanding of:, • SMT manufacturing processes, • PCB assembly and PCBA manufacturing, • RF assembly techniques, • Electro-mechanical product manufacturing, • Ability to interpret complex engineering drawings, schematics, Gerbers, CAD files, and BOMs., • Experience with CAD software and ERP/MES systems., • Strong troubleshooting, root cause analysis, and problem-solving skills., • Experience developing manufacturing documentation and production processes., • Strong communication and cross-functional collaboration skills.Preferred Qualifications, • Experience supporting RF, aerospace, defense, communications, or other high-reliability manufacturing industries., • Familiarity with cleanroom manufacturing environments., • Experience working in military, space, or highly regulated manufacturing environments., • Knowledge of CNC machining or mechanical design principles., • Experience with process validation, equipment qualification, and continuous improvement methodologies., • Familiarity with Costpoint or similar ERP systems.Compensation & Benefits, • Competitive salary based on experience and qualifications., • Comprehensive medical, dental, and vision benefits., • 401(k) retirement savings program., • Paid time off and company holidays., • Professional development and technical training opportunities., • Long-term career growth within a stable and growing organization.Why Consider This Opportunity?, • Work with advanced RF, PCB, and electro-mechanical products., • Play a key role in new product introduction and manufacturing process development., • Enjoy a highly collaborative environment with direct interaction across engineering and manufacturing teams., • Opportunity to make a significant impact on product quality, efficiency, and operational performance.In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $95k-$135k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $95,000.00 to $135,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: Job Title: Manufacturing Engineer Job Type: Full-time Location: Plainview, NY We are seeking a highly skilled Manufacturing Engineer to join our team. The successful candidate will be responsible for designing, developing, and improving manufacturing processes and systems. The ideal candidate will have a strong background in manufacturing processes, quality control, and project management. Responsibilities: • Design, develop, and improve manufacturing processes and systems, • Develop and implement quality control measures to ensure product quality, • Collaborate with cross-functional teams to identify and resolve manufacturing issues, • Develop and maintain manufacturing documentation, including work instructions and process flow diagrams, • Identify opportunities for process improvement and cost reduction, • Manage projects from conception to completion, ensuring timely delivery and within budget, • Train and mentor production staff on new processes and equipment Requirements: • Bachelor's degree in Manufacturing Engineering or related field, • Minimum of 3 years of experience in a manufacturing environment, • Strong knowledge of manufacturing processes and systems, • Experience with quality control and process improvement methodologies, • Excellent project management skills, • Strong communication and interpersonal skills, • Ability to work independently and as part of a team, • Proficient in Microsoft Office and CAD software, • Knowledge and proficiency in CNC programming We are an equal opportunity employer and welcome all qualified candidates to apply. We celebrate diversity and are committed to creating an inclusive environment for all employees. Requirements: QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • Bachelor’s Degree in Mechanical or Electrical Engineering required or university program certificate; or two to four years related experience and/or training; or equivalent combination of education and experience. Language Skills • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description FTC has immediate opportunities for experienced Special Inspectors and Field Engineers to be part of our team. • Complete assigned inspection as scheduled by dispatch, • Perform scheduled inspection during the time assigned – inspect, review and submit reports according to NYS DOB code and approved drawings, • Usual schedule is 7am-3:30pm, • Perform all other duties as assigned by your supervisor or manager.Qualifications, • Ideal candidates must hold certifications from ICC, AWS, NICET and/or ACI including:, • ICC Commercial or Residential Certification required., • Technical, Associate’s, or Bachelor’s Degree pertaining to the Engineering field (Civil, Mechanical, Environmental, etc.) a plus., • Candidates must be familiar with the New York City Building Code, • Ability to read prints and find inspection locations, • Ability to produce inspection reports according to company standards, • Must be proficient in Microsoft Word, Excel, and Outlook., • Reliable means of transportation necessary., • Extensive knowledge of industry standards, • Must be punctual, reliable with good attention to detail, • Ability to work various shifts, • Ability to travel numerous job sites daily, • Highly motivated team player with a strong work ethic, • Able to communicate effectively with a variety of project managers, • Prepare and electronically submit daily reports, • Organized and efficient, • Authorized to work in the U.S with a valid driver license Additional Information FTC/SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit www.socotec.us or ftcny.com Hourly rate: $25-55/hr SOCOTEC is an Equal Opportunity Employer.

Job Description We are hiring! ACS System Associates, Inc. established in 1983 is one of ENR top rated MBE privately held HVAC Commercial Companies. ACS is renowned for projects such as World Trade Center, Brooklyn Navy Yard, Stony Brook Hospitals, and a wide variety of both private and public work projects in the Greater New York area including Westchester, New York City, and Long Island. The diverse portfolio includes retail, office, industrial, hotel, schools, and hospital projects. We have an internal division complete with engineers, architects, draftsmen, project managers, and supervisors. These specialists work with clients such as Tishman, Turner, and Lend Lease to make sure each project is done effectively, on time, and within budget. We offer a lucrative benefits package to our employees that include Medical, Dental, Vision, 401K, PTO, Life Insurance, Education reimbursement to name a few. Headquartered in Long Island, NY with additional offices in Westchester County. We are seeking an experienced Mechanical Professional Engineer (PE). Key Duties & Responsibilities: • Design, review, and seal mechanical engineering drawings and specifications in accordance with New York requirements., • Lead HVAC, plumbing, and mechanical system design for commercial and industrial projects., • Manage multiple projects while maintaining schedules and budgets., • Perform engineering calculations, equipment selection, and code compliance reviews., • Conduct site visits and oversee construction administration as needed., • Interface with contractors, vendors and regulatory agencies. Requirements: • Bachelor's degree in Mechanical Engineering, • Current New York State Professional Engineer (PE) license required., • Minimum of 5 years of mechanical engineering design experience., • Strong knowledge of the New York Building, Mechanical, and Energy Codes plus applicable industry standards., • Proficiency with AutoCAD and/or Revit; familiarity with HVAC load calculation software is preferred. Primary Location: United States-New York-Hicksville Other Locations: United States-New York-Westbury Other Locations: United States-New York-Mount Vernon Applicants must be authorized to work in the U.S. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. • Job Type: Full-timeCompany Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts., • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential. With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

Job Description Schivo Medical is a contract manufacturing that creates medical devices, surgical tools and military components. We are located in Plainview, NY. We are seeking to hire a mid-level Manufacturing Engineer ideally that has worked a few years for a CNC Manufacturer. A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. • Necessary Education, Skills, and Competencies (including licensing and certifications):, • BS Degree in Mechanical Engineering or related field, • 3 to 5 years solid work experience as a manufacturing engineer or similar role, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Lead or assist in the cost estimating process., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology., • Continuous Improvement Experience desired., • Assist with new product implementation. Benefits: • 401(k), • 401K Match, • Dental insurance, • Health insurance, • Vision Insurance, • Generous Paid time off, • EAP Program, • Life Insurance, • Employee referral program (Applicants must be authorized to work in the United States, the company does not sponsor ) Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionJob Title: Associate Civil EngineerRequisition: 82435PSEG Company: PSEG Long IslandSalary Range: $ 67,200 - $ 106,400Work Location Category: Hybrid Fixed - Hicksville, NY We’re one of the country’s largest energy companies, with a vision of powering a future where people use energy more efficiently and it’s safer and delivered more reliably than ever. We’re also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day. Here, you’ll have the stability and exciting opportunities that come with being a Fortune 500 company — along with a supportive, friendly work environment where your contributions are valued. We know life isn’t one-size-fits-all, and neither is work. That’s why we offer flexible work options depending on the role. In support of this model, roles have been categorized into one of three work location categories: • Onsite – roles where employees are expected to be onsite daily., • Hybrid fixed – roles that are a mix of remote work and onsite work fixed days each week., • Hybrid flexible – roles that are a mix of remote work and onsite work, but the onsite requirements have greater flexibility. (i.e. 5-8 days a month vs. set days each week). As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits designed to support your total well-being: medical, dental, vision, paternal leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off. More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you’re looking for a place where you can build a meaningful career and help power and support our communities, we’d love to welcome you to the team. PSEG is not offering visa sponsorship for this position. Job Summary:As the Civil Engineer, your responsibility is to perform engineering and design to ensure successful completion of Long Island Transmission & Distribution construction projects. Job Responsibilities: • Prepare & check civil engineering calculations and drawings in accordance with the latest industry codes & standards using computer programs such as TeamCenter, AutoCad, Staad III, Microsoft Office, etc. in support of the modifications and additions., • Approve vendor drawings and shop drawings. Prepare, update and analyze cost estimates and budget documents., • Evaluate soil boring data and soil reports. Determine the load bearing capacity and settlement parameters for foundation design. Select pile type and furnish design., • Participate in site investigations, prepare as-built sketches of existing field conditions for design purposes, witness & perform key inspections during the course of construction and resolve field problems encountered during construction., • Participate in project meetings for the development and subsequent progress of projects with civil engineering requirements. Prepare project documents, prepare bid packages, prepare contract documents, prepare specifications, evaluate contractor proposals and participate in contractor pre-award meetings., • Prepare general scope of work and procurement documents to obtain outside consultants for engineering assistance. Monitor consultants as work progresses. Evaluate and approve consultants’ final reports, drawings & specifications., • Perform field inspections and prepare formal inspection reports with recommendations for existing facilities regarding safety, repair and modification. Perform field inspections and testing of various secondary containment systems for petroleum and hazardous material products. Job Specific Qualifications: • BS Degree in Civil Engineering., • Strong knowledge of structural analysis, reinforced concrete, structural steel and soil mechanics as well as marine structures., • Knowledge of AISC, ACI, ASCE, NESC, NYSDOT, NYS & local building codes., • Familiarity with document management systems ( e.g.TeamCenter), 3D structural analysis and design software (i.e., Staad III) and AutoCAD., • Knowledge of ANSI, ASTM, National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation (latest codes). Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Experience with using Microsoft Office computer programs such as Word, Excel, Access and Outlook., • Must possess a valid U.S. Driver's License and maintain a satisfactory driving record. Desired:, • EIT Certificate and the ability to obtain Professional Licensure in NYS., • Knowledge of engineering design and analysis of underground electric transmission systems including 23-345 KV pipe type cable and solid dielectric cable systems. Knowledge of AutoCAD and TeamCenter., • Knowledge of the National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation. Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Demonstrated verbal, written, interpersonal communication skills and computer skills. Some positions at PSEG require access to information covered by the Department of Energy’s regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: (1) a citizen or national of the USA; OR (2) a lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR (3) a citizen, national, or permanent resident of a “Generally Authorized” destination on the attached list and not also a citizen, national, permanent resident of any country not listed; OR (4) a “Protected Individual” under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)). As an employee of PSEG Long Island, you should be aware that during storm/outage restoration efforts, you may be required to perform functions different from normal operations and work extended hours beyond your regular work schedule. You may also be required to work on premise or in an alternate location as directed by the company. For all roles, PSEGLI’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you are a current PSEG employee and offered an opportunity with PSEG Long Island, you will be treated as a new hire. Please note that as a new hire to the Long Island subsidiary, your benefits will change and generally will be consistent with other similarly situated PSEG Long Island new hires. Similarly, for PSEG Long Island employees who accept job opportunities with PSEG or any of its subsidiaries (other than PSEG Long Island), their benefits will change and generally be consistent with other similarly situated new hires of that company. PSEGLI is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. PSEGLI is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com. If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.

Job DescriptionElectrical Test Engineer Location: Plainview, NY (Onsite) We're seeking an Electrical Test Engineer to join a growing engineering team supporting the development and testing of advanced aerospace systems. This role is ideal for an engineer with 1–2+ years of hands-on electrical testing experience who is looking to build expertise in EMI/EMC testing, aerospace standards, and product validation. You will work alongside experienced engineers to develop test plans, execute testing activities, troubleshoot electrical systems, and document results for products used in demanding aerospace applications. Responsibilities • Develop and execute electrical test plans, procedures, and reports., • Coordinate testing activities with external laboratories and test facilities., • Perform EMI/EMC testing and support compliance activities., • Conduct testing to aerospace and military standards including DO-160, MIL-STD-704, and MIL-STD-461., • Troubleshoot electrical systems and identify root causes of test failures., • Operate laboratory equipment including oscilloscopes, multimeters, power supplies, and function generators., • Record test data, complete documentation, and create technical reports., • Review electrical schematics, wiring diagrams, and engineering drawings., • Document non-conformances and assist with corrective actions., • Collaborate with engineering teams to ensure products meet performance and reliability requirements.Required Qualifications, • Bachelor's degree in Electrical Engineering or related engineering discipline., • 1–2+ years of experience in electrical testing, validation, troubleshooting, or test engineering., • Experience using electronic test equipment such as oscilloscopes, multimeters, power supplies, and function generators., • Ability to read and interpret electrical schematics and diagrams., • Strong troubleshooting and problem-solving skills., • Excellent documentation and communication skills.Preferred Qualifications, • Exposure to EMI/EMC testing., • Familiarity with DO-160, MIL-STD-704, or MIL-STD-461., • Experience within aerospace, defense, military, electronics manufacturing, or highly regulated industries., • Military experience (active duty, reservist, or veteran) with electrical systems or testing is highly valued. Job Type & Location This is a Contract to Hire position based out of Plainview, NY. Pay and Benefits The pay range for this position is $33.00 - $43.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Plainview,NY. Application Deadline This position is anticipated to close on Aug 3, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Level 1 Helpdesk Engineer (MSP) 📍 Hicksville, NY | Hybrid (Onsite Dispatch as Needed) 🕒 Full-Time About Lincoln IT Lincoln IT is a growing Managed Services Provider supporting clients in finance, legal, healthcare, and other regulated industries. We focus on delivering reliable IT, strong client relationships, and clear career growth for our team. The Role We’re looking for a Level 1 Helpdesk Engineer who enjoys helping people, solving problems, and building a career in IT. You’ll be the first point of contact for client support requests, working in a fast-paced MSP environment with exposure to a wide range of technologies. This role includes both remote support and occasional onsite dispatches to client locations. What You’ll Do Serve as first-line support for end users via phone, email, and ticketing system Troubleshoot and resolve issues with: Windows desktops and laptops Printers and peripherals Microsoft 365 (Outlook, Teams, OneDrive, SharePoint) Basic networking and connectivity issues Escalate complex issues to Level 2/3 engineers with proper documentation Perform onsite visits for installations, troubleshooting, and remediation Document all work clearly in the ticketing system (ConnectWise preferred) Assist with user onboarding/offboarding (accounts, permissions, hardware setup) Follow SLAs and internal processes to deliver consistent support Requirements 1–2 years of experience in Helpdesk, Desktop Support, or similar role Strong working knowledge of Windows and Microsoft 365 Basic understanding of networking concepts (DNS, DHCP, TCP/IP) Excellent communication and customer service skills Ability to multitask and prioritize in an MSP environment Reliable transportation and willingness to travel locally (mileage reimbursed) Experience with ConnectWise, IT Glue, or similar tools is a plus CompTIA A+, Network+, or similar certifications preferred (or working toward) Why Join Lincoln IT Competitive salary and benefits Hands-on experience across diverse client environments Clear growth path within a Managed Services organization Ongoing training and mentorship Supportive, team-oriented culture Powered by JazzHR QRrwMlQQTW

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're seeking driven and enthusiastic professionals to join our team, empower lives, fuel businesses, and drive innovation. Connectivity is now longer a luxury, but a necessity. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. Our successes, now and in the future, are powered by our amazing product, a commitment to our people and culture, and the connections we make in our communities. If you are resourceful, collaborative, and passionate about delivering consistent excellence, Optimum is for you! We are seeking an experienced and forward-thinking Manager of Customer Identity and Access Management (CIAM) to lead our enterprise identity practice. In this role, you will define and execute the strategy for our customer identity platform while overseeing day-to-day operations. You will play a critical role in modernizing authentication across the organization, transitioning from legacy approaches to secure, scalable, standards-based identity solutions. This role combines strategic direction, architectural oversight, and team leadership. Your work will directly impact the security posture, regulatory compliance, and customer experience of our digital products. CIAM Platform Ownership & Governance • Own and operate the enterprise customer identity platform, including IDP configuration, directory management, and user lifecycle (Joiner/Mover/Leaver) processes., • Define and enforce identity standards across protocols such as OAuth2, OpenID Connect (OIDC), SAML, and SCIM., • Design and maintain authentication policies, including adaptive and risk-based controls, to balance security and user experience., • Oversee identity workflows for provisioning, de-provisioning, and orchestration across systems., • Ensure platform reliability and performance, including service-level objectives (SLOs), incident response, and continuous improvement. Authentication Modernization & Engineering Enablement • Lead the enterprise transition from legacy authentication approaches to modern CIAM solutions., • Establish scalable authentication patterns, including SSO, MFA, passwordless, and federated identity., • Develop migration frameworks, playbooks, and reusable integration patterns for application teams., • Track adoption progress, define KPIs, and communicate roadmap updates, risks, and outcomes to senior leadership., • Evaluate emerging capabilities (e.g., passkeys, device trust) and align adoption with the enterprise security strategy. Application Partnership & Developer Enablement • Serve as the primary IAM advisor to application development teams, guiding secure and scalable identity integrations., • Provide architectural guidance on authentication flows, token management, and session design., • Build developer enablement resources, including documentation, reference implementations, and onboarding support., • Establish engagement models (e.g., office hours, communities of practice) to promote self-service adoption., • Partner with platform engineering, DevOps, and API teams to integrate identity into CI/CD pipelines and modern architectures. Security, Risk & Compliance • Ensure CIAM platform compliance with regulatory and contractual requirements (e.g., SOX, PCI-DSS, SOC 2) through embedded controls and audit readiness., • Partner with Security, GRC, and SOC teams on identity risk management, including access reviews and threat detection., • Define and monitor identity security signals (e.g., account takeover, credential abuse) and support SIEM integration., • Oversee vulnerability management and security posture of identity systems and supporting services. Team Leadership & Organizational Development • Lead, mentor, and grow a high-performing IAM engineering team., • Define team structure, roles, and capabilities aligned to enterprise identity strategy., • Foster a culture of accountability, continuous learning, and psychological safety., • Build strong cross-functional partnerships with Product, Security, Legal, Privacy, and Customer Experience teams., • Manage vendor relationships and operating budget for CIAM platforms, tooling, and services. Required • Bachelor’s degree in Computer Science, Information Systems, Cybersecurity, or related field (or equivalent experience), • 7+ years of experience in Identity & Access Management, cybersecurity, or a related field, • 3+ years of experience leading or managing technical teams, • Hands-on experience with CIAM platforms and modern identity standards (OAuth2, OIDC, SAML, SCIM, FIDO2/WebAuthn), • Proven experience leading large-scale identity or authentication modernization initiatives, • Ability to translate complex IAM concepts into clear guidance for technical and non-technical stakeholders, • Experience operating high-availability systems, including SLO management and incident response, • Familiarity with compliance frameworks such as SOX, SOC 2, and PCI-DSS Preferred • Certifications in consumer identity platforms, • Experience with Customer Identity and Access Management (CIAM) patterns: progressive profiling, social login, consent management, and customer-facing MFA enrollment UX, • Familiarity with at least one modern programming language (Go, Java, Python, Node.js) sufficient to review integration code and guide teams on SDK usage, • Experience with cloud-native infrastructure (AWS, Azure, or GCP) and integrating consumer identity platforms with cloud IAM services, • Exposure to Zero Trust architecture principles and practical implementation via CIAM platform or Device Trust policies, • Working knowledge of SIEM integration for identity telemetry At Optimum, every action and interaction we take part in, is driven by our three Guiding Principles: Do What’s Right, Drive One Optimum, and Make It Happen. These aren’t just words, they help us build trust, create real community, and embrace new ways of thinking. Our employees are empowered to do the right thing for our customers and co-workers and to recognize and reward these behaviors when we see them. It’s all part of the bigger picture of “Be The Difference” where each employee knows they have the power to enact real change, share new ideas, and understand that learning never stop. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team. Together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company’s discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our _ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in New York is 133,661.00 - 219,586.00 / year. For other locations, please inquire with your recruiter. The rates/ranges provided herein are the anticipated pay at the time of hire, and do not reflect future job opportunity. We appreciate your interest in this opportunity. Applicants must be authorized to work for ANY employer in the U.S. Please note that at this time, we do not provide visa sponsorship for employment.

Responsibilities: \n\n • Responsible for assisting and coordinating the development of RFPs for generation and transmission, directs the evaluations of proposals and prepares recommendations to senior management and LIPA for selection. The projects include renewable and/or non-renewable resources, such as Offshore Wind, Solar, Fuel Cells, Energy Storage and Smart Grid REV, as well as conventional generation.\n, • Responsible for ensuring ongoing continuous improvement with application of complex LSS tools and comprehensive Stakeholder communication and Stakeholder Management plan. Skill set and in depth knowledge of regulatory and policy aspect is required to perform this function.\n, • Provides technical advice and guidance in the procurement of new power generation and transmission resources and the development of power purchase, easement etc.\n, • Requires good understanding of the costs and technical details associated with both renewable and conventional generation technologies, various interconnection schemes for those technologies.\n, • Knowledge of the RFP process for LIPA, diligent documentation of the procurement process to ensure approval of the PPAs as well understanding of legal perspective associated with the procurements, commercial contracts and key decisions such as selection or rejection of awards, evaluations, determining performance, price negotiations, cancellation or modification of contracts etc.\n, • Assist in development of strategy for New York State CLCPA implementation, Clean Energy Standard compliance and implementation as well as execution of the projects to comply with FERC, NERC, NYISO and New York State policy and regulatory mandates.\n, • Provides end to end assistance for project development to contracted resource projects.\n, • Requires knowledge of project management function and requires through understanding of political and community issues, permitting processes, regulatory developments and requirements, core project management and coordination skills with internal as well as external stakeholders.\n\n \n Job Qualifications: \n\n • Bachelor’s degree in engineering (desired electrical)\n, • Project management and contract management experience.\n, • Good knowledge of handling and negotiating commercial contracts\n, • Understanding of T&D system and generation aspect.\n, • Strong organization skills, attention to detail plus leadership skills and effective verbal and written communication skills needed.\n

Job DescriptionSenior PCB Design Engineer Confidential Client | Long Island, NY Area A well-established engineering and manufacturing organization is seeking a Senior PCB Design Engineer to support the development of advanced RF, analog, and digital electronic systems. This position plays a key role in the design and layout of complex printed circuit board assemblies used in high-performance applications. Position Overview The Senior PCB Design Engineer will be responsible for the detailed design, layout, and documentation of RF, analog, and digital circuit card assemblies. This individual will collaborate closely with electrical engineers, manufacturing teams, and external suppliers to develop reliable, cost-effective designs while ensuring compliance with technical and production requirements. Key Responsibilities • Design and develop RF, analog, and digital printed circuit board assemblies (PCBAs) and multilayer PCBs., • Create detailed PCB layouts, schematics, assembly drawings, routing drawings, and related design documentation., • Collaborate with engineering teams to evaluate customer requirements and determine technical feasibility, cost, and schedule considerations., • Support the development of design concepts and establish appropriate design approaches for new projects., • Provide technical guidance to engineers, designers, and drafters throughout the product development process., • Identify and implement cost-reduction opportunities related to PCB design, fabrication, and assembly., • Coordinate with PCB fabricators, suppliers, and manufacturing partners to ensure design requirements are met., • Support proposal development by providing estimates for design effort, schedules, materials, and manufacturing considerations., • Maintain design documentation, engineering records, bills of materials, schematics, and revision-controlled files., • Ensure designs align with industry standards, manufacturability requirements, and quality objectives.Required Qualifications, • Bachelor's degree in Electrical Engineering or a related technical discipline., • 7+ years of PCB design, electrical design, or related engineering experience., • Strong experience designing RF, analog, and digital circuit card assemblies., • Experience with single-layer, multilayer, and high-density PCB designs., • Knowledge of surface mount technology (SMT) and hybrid circuit technologies., • Experience supporting RF and/or DC circuit board designs., • Understanding of electrical, mechanical, and electro-mechanical integration principles., • Proficiency with PCB design software such as Mentor PADS, Logic, or comparable design tools., • Strong documentation, organization, and technical communication skills.Preferred Qualifications, • Experience supporting aerospace, defense, communications, industrial electronics, or other high-reliability applications., • Familiarity with ERP systems and engineering document control processes., • Experience using Costpoint or similar business systems., • Working knowledge of Autodesk Inventor and AutoCAD., • Experience coordinating with PCB fabrication and assembly vendors., • Background in design-for-manufacturing (DFM) and design-for-testability (DFT) methodologies.Compensation & Benefits, • Competitive compensation package based on experience., • Comprehensive medical, dental, and vision benefits., • 401(k) retirement program., • Paid time off and company holidays., • Professional development and technical training opportunities., • Career growth within a collaborative engineering organization.Why Consider This Opportunity?, • Work on advanced RF, analog, and digital electronic products., • Collaborate with experienced engineering and manufacturing teams., • Contribute throughout the full product development lifecycle., • Join a stable organization developing complex, high-performance electronic systems.In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $100k-$125k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $100,000.00 to $125,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Electrical Engineering Professors to contribute expertise to a high-impact project advancing AI research and assessment technology. PhD or advanced Master's degree in Electrical Engineering with demonstrated teaching experience at the university level (professor, adjunct, lecturer, or TA). Electrica