Offres Engineering à Freeport, New YorkCréer des alertes d'emploiTemps plein

Our campus is a hub for engineering excellence, where we tackle some of the world's most challenging engineering problems. Advanced degree from an accredited college in a related discipline such as Engineering, Computer Science, Mathematics or Physics. Systems Engineering: System Architecture.

Job DescriptionDescription: The candidate will support the electrical design and test of Rate and Rate Integrating Gyroscopes. This will include the design of electrical gyroscope components such as motors, pickoffs and torquers, as well as custom built test fixtures and test harnesses. In addition, the candidate will assist in the design of tests and provide analytical support for testing Rate and Rate Integrating Gyroscopes, including Acceptance Test Procedures (ATP), scale factor, transfer function, drift, alignment, and 1st and 2nd order system stability characteristics (gain/phase analysis), etc. EDUCATION: Minimum 4-year degree in electrical or electronics engineering, or other technical degree with appropriate work history or background. EXPERIENCE: 5+ years dealing with four or more of the following: Electronic product or component design and/or analysis Basic understanding of 1st or 2nd order control systems (servo systems, spring/mass/damper) Electronics systems (amplifiers, power supplies, demodulators, signal conditioning, filters) Electromechanical, mechanical, or electromagnetic systems Engineered (specialized) products to customer/government specifications Custom (product specific) Test systems Environmental testing (temperature, shock, vibration as a minimum) Hands-on design, test, and troubleshooting experience required SKILLS: Required skill set shall include as a minimum: Can interpret, digest, and produce technical specifications and procedures Computer literacy Excellent communications, presentation, and written skills, including customer facing Analytical (math) modeling capability, 1st and 2nd order systems Electrical test equipment operation skills, e.g.; DVM, oscilloscope, signal generator PC Board design Analog circuit design and component selection Servo (control system) analysis, and system design (1st and 2nd order systems), gain/phase analysis Additional skills desirable: Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment Microcontroller/microprocessor based digital and/or mixed signal circuit and system design Magnetic circuit analysis and design capability Basic mechanical instruments skills, e.g.; micrometers, calipers, dial indicators, precision levels An outstanding self-starter with a can-do attitude willing to go above and beyond the normal Requirements:

Job DescriptionDescription: JOB TITLE: Quality Engineer Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment in innovation, quality, and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Quality Engineer to join our dynamic team and continue our mission of excellence. Job Summary: In this role, you will be responsible for ensuring safety and quality of our products and procedures through rigorous inspections, implementations of quality measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building a high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering and/or quality assurance, exceptional attention to detail and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of the Quality team. Key responsibilities: · Set detailed guidelines on what needs to be checked and what the quality standards are. · Audit our systems based on ISO 9001: 2015 requirements. · Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible. · Inspect product materials and PCB for defects and durability. · Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order) · Review current blueprints and quality documentation · Work with internal teams to increase customer satisfaction by improving the quality of products. Required Qualifications: · Previous work experience as a Quality Engineer, Manufacturing Engineer, or similar role. · In-depth understanding of technical documentation · Able to create a technical document · Working knowledge of RCCA practice · Familiar with IPC610 and J-STD · Familiarity with statistical analysis · Great attention to detail and problem-solving abilities · Team Spirit · Great analytical skills · BSc in Mechanical Engineering, Industrial Engineering, or relevant field. (years of experience will be taken into consideration as a substitute for a BSc) · Additional certification in Quality Assurance is a plus. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Efficient Energy Compliance is looking for several qualified professionals dedicated to combating climate change by decarbonizing buildings and providing resilient solutions for new building systems. As a crucial part of our expanding team, this role will be contributing to EEC’s services of commissioning, retro-commissioning, energy auditing, and resiliency retrofits in the NYC area. We are seeking qualified individuals who will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below: We are seeking a Commissioning Engineer with a strong background in energy efficiency and building systems to join our team. The ideal candidate will be responsible for overseeing the commissioning process of energy-efficient systems and technologies in both new construc Responsibilities • Lead and manage the commissioning process from kickoff through closeout, keeping projects organized, on schedule, and moving forward, • Coordinate closely with ownership, design teams, contractors, and vendors to align scope, resolve issues, and maintain progress, • Conduct site inspections to verify system installations align with design intent, specifications, and energy efficiency goals, • Review submittals and shop drawings to confirm systems are being installed in accordance with project requirements, • Oversee and witness equipment startup, pre-functional checklists, and functional performance testing across all systems, • Perform system testing, diagnostics, and troubleshooting to verify proper operation and identify issues early, • Execute point-to-point verification and sequence of operations testing for HVAC, electrical, lighting controls, and BAS systems, • Maintain commissioning schedules, issue logs, and documentation, actively tracking deficiencies through resolution, • Work directly with GC and MEP trades during construction to support system readiness, coordination, and turnover, • Analyze BAS trends and system performance data to identify inefficiencies and optimize building operations, • Monitor and validate energy performance during commissioning, providing practical recommendations for improvement, • Ensure all commissioning activities align with applicable codes and standards, including NYC Energy Conservation Code (NYCECC), LEED, and ASHRAE guidelines, • Support multiple projects simultaneously while maintaining strong communication, organization, and attention to detail, • Prepare and contribute to preliminary and final commissioning reports, including all testing documentation and system verification, • Coordinate building turnover by supporting O&M documentation, as-builts, and training for facility teams, • Participate in seasonal testing and warranty phase reviews, helping identify and resolve post-occupancy issues, • Utilize commissioning platforms such as Bluerithm to manage workflows, testing, and reporting Requirements: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Energy Management, or a related field. 5+ years of experience in building systems commissioning, with a focus on energy efficiency and sustainable building practices. Strong knowledge of energy-efficient technologies, building systems (HVAC, lighting, controls), and renewable energy systems. Familiarity with commissioning processes for energy-efficient systems, including building automation, HVAC, and lighting systems. In-depth understanding of energy codes, standards, and certifications (e.g., NYC Energy Conservation Code, LEED, ASHRAE, Title 24). Experience with energy modeling and system analysis software (e.g., Trane Trace, EnergyPlus, etc.). Strong troubleshooting, diagnostic, and problem-solving skills. Excellent communication skills, with the ability to collaborate effectively with project teams, clients, and contractors. Ability to manage multiple projects and timelines, ensuring completion within scope, budget, and schedule. Preferred Skills: Certification as a Commissioning Professional (CxA) or LEED Accredited Professional (LEED AP). Knowledge of New York City’s energy codes and regulatory environment. Ideal Candidate Will Have • Excellent work ethic, • Strong verbal and written communication skills, • Excellent communication and presenter skills, • Attention to detail, • Strong time-management skills, • Strong organizational skills, • Self-motivation We thank all applicants for their interest, however, only those candidates selected for interviews will be contacted. We offer a competitive salary and good benefits package, including healthcare benefits and paid time off. 401K and Aflac & Flexible spending account. Interested candidates, please forward resume with salary requirements. Salary depending on experience. Efficient Energy Compliance LLC is proud to be an equal opportunity employer.

Job Description Pay: $65,000.00 - $75,000.00 per year Job description: Growing architecture firm seeks Jr Project Manager / Job Captain to be responsible for the objectives, requirements and budget of an architectural project. They motivate team members and provide progress updates. A Jr Project Manager / Job Captain is an experienced architectural draftsperson who runs projects from initial feasibility studies to handing over the certificate of occupancy to the owners. Duties: · May share the responsibilities of the same project with Senior Project Manager. · Punctual, professional demeanor, and ability to communicate effectively with team members. · Ultimately responsible for the drafting and completion of a project. · Ability to meet milestones laid out by project manager. · Attends client-consultants meetings and construction meetings with the general contractor. · Oversees the project from design documentation to completion of construction. · Proficient knowledge on how to put together a complete shell of a commercial building. · Proficient knowledge of the Building Code and ADA requirements for commercial uses. · Proficient understanding of the various agencies that may be required to obtain full permits to construct a commercial building inside and out. · Experience in Medical facilities beneficial, along with FGI guidelines for Outpatient Facilities, and Dept of Health Article 28 (Hospitals) regulations. Skills/Qualifications: · 5+ Years’ Experience · Proficient in AutoCAD · Experience in Procore and Sketchup is beneficial Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Ability to commute/relocate: • Rockville Centre, NY 11570: Reliably commute or planning to relocate before starting work (Required) Experience: • Architectural: 3 years (Required), • AutoCad: 1 year (Required), • ProCore/Sketchup: 1 year (Preferred) Work Location: In person Company DescriptionDESIGN BUILD FIRM; ARCHITECTURAL, CONSTRUCTION MANAGEMENT, PROPERTY MANAGEMENT FIRM.DESIGN BUILD FIRM; ARCHITECTURAL, CONSTRUCTION MANAGEMENT, PROPERTY MANAGEMENT FIRM.

Job Description Hazen and Sawyer is seeking an experienced Principal Architect to lead architectural design efforts across our Northeast Region and support the expanding needs of our clients in the water and wastewater sector. In this architectural leadership role, you will guide and elevate the architectural components of multidisciplinary project teams—overseeing design quality, technical rigor, and integration—while contributing to the planning, design, permitting, and construction of facilities that support and protect critical water infrastructure. The Principal Architect will oversee a diverse portfolio of projects within the “water space,” including but not limited to: • Drinking water and wastewater treatment facilities, • Water resource and conveyance structures, • Associated buildings such as administrative spaces, laboratories, and operational support facilities, • Renovation, rehabilitation, and historic restoration of existing facilities and structures You will play a key role in shaping design strategy, elevating architectural excellence, and ensuring successful project delivery from concept through construction. A sample of Hazen’s Architectural Design can be viewed on our website: Hazen and Sawyer | Architectural Design Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Our Architectural group delivers the personalized service of a small studio backed by the deep resources of a full-service, multidisciplinary firm. Key Responsibilities: • Lead architectural design from schematic development through construction‑ready documents, ensuring precise technical detailing, appropriate material selection, construction sequencing, and high‑quality specifications., • Review, refine, and integrate architectural details to ensure constructability, clarity, durability, and full alignment with project goals and standards, • Collaborate with engineering, estimating, project management, and field staff to produce fully integrated and constructible designs., • Coordinate with consultants, AHJs, and code officials to ensure regulatory compliance with construction requirements., • Conduct existing conditions assessments and prepare design and technical reports for water and wastewater treatment projects., • Lead renovation, adaptive reuse, and historic restoration efforts, including evaluation of structural and architectural integrity, preservation of architectural features, and integration with modern building systems., • Perform construction administration tasks, including submittal review, responding to RFI’s, site inspections, and field clarifications., • Participate in cost estimating, scheduling, and value engineering efforts to improve constructability and project outcomes. Required Qualifications: • Bachelor of Architecture or BS in Architectural Technology degree from U.S. accredited university, • NYS Registered Architect or NCARB Certification, • 8-10 years of architectural experience with a strong emphasis on detailing and constructability for infrastructure or public works projects, • Demonstrated experience with public bid projects, including budget, schedule, and quality oversight., • Deep understanding of building systems integration (Architectural, Structural, MEP, Civil)., • Proven ability to develop technical, constructible details and understand construction methods and materials., • Proficiency with building codes, environmental regulations, and sustainable design principles., • Strong leadership skills and ability to coordinate effectively with multidisciplinary teams., • Excellent communication skills and ability to collaborate in a dynamic team environment. Preferred Qualifications: • Hands-on experience in construction administration and field coordination., • Ability to identify and resolve constructability and detailing issues early in design., • Strong technical writing and communication skills to clearly convey design intent., • Experience with building renovations, rehabilitations, or historic preservation projects., • Commitment to quality assurance, technical accuracy, and constructible solutions throughout all phases of a project. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location Please submit a resume and cover letter to be considered.

Job DescriptionBenefits: • Company parties, • Competitive salary, • Free food & snacks, • Paid time off ROSENBERG LAW GROUP PLLC Brooklyn, NY • Lawrence, NY IT Technician / AI Workflow Engineer / Cybersecurity Specialist Full-Time or Part-Time • Hybrid — Lawrence, NY / Remote • Reports to: Managing Attorney ABOUT ROSENBERG LAW GROUP PLLC Rosenberg Law Group PLLC (RLG) is a New York-based real estate law firm specializing in residential bank closings and property transactions. With offices in Brooklyn and Lawrence, NY, RLG serves lenders, buyers, sellers, and affiliated entities across the New York metropolitan area. The firm is committed to operational excellence, client confidentiality, and the strategic adoption of technology to deliver efficient, accurate, and secure legal services. As RLG continues to expand its practice and affiliated entities, we are investing in the people and systems that will power the next generation of our operations. POSITION OVERVIEW RLG is seeking a versatile and highly capable IT Technician / AI Workflow Engineer / Cybersecurity Specialist to own the firm's entire technology infrastructure. This is a unique, high-impact role that spans traditional IT management, cutting-edge AI workflow automation, cybersecurity compliance, web development, and mobile app development. The ideal candidate is a self-starter who thrives in a fast-paced legal environment, can work independently, and is excited about building technology systems from the ground up. You will work directly with firm leadership and have the opportunity to shape how RLG and its affiliated entities operate for years to come. KEY RESPONSIBILITIES 1. IT Infrastructure Management ●Administer and maintain all IT systems for RLG and its affiliated entities, including hardware, software, and network infrastructure ●Manage the Microsoft 365 environment (Exchange Online, SharePoint, OneDrive, Teams, Azure AD), including user accounts, licensing, and access controls ●Configure and maintain printers, scanners, workstations, and mobile devices across firm locations ●Coordinate with external vendors and service providers for hardware procurement, maintenance, and support contracts ●Monitor system performance, manage updates and patches, and ensure reliable uptime across all platforms 1. Cybersecurity & Compliance ●Design, implement, and maintain cybersecurity protocols across all firm systems and endpoints ●Enforce data encryption standards and secure handling protocols for confidential client documents and transaction records ●Ensure compliance with New York data privacy requirements and applicable legal industry security standards Brooklyn, NY & Lawrence, NY | Apply via CareerPlug | Page 1 Rosenberg Law Group PLLC | Confidential Posting ●Establish and manage phishing prevention measures, endpoint protection, and multi-factor authentication (MFA) policies ●Define and enforce role-based access controls (RBAC) and least-privilege principles across all platforms ●Develop and maintain an incident response plan; lead response and remediation in the event of a security event ●Conduct periodic security audits and vulnerability assessments 1. AI Workflow Development & Automation ●Build and maintain AI-powered automation workflows using Microsoft Power Automate, Microsoft Copilot, Perplexity, and similar platforms ●Automate document intake, routing, review, and processing workflows for real estate closings and legal transactions ●Develop AI-driven tools to reduce manual workload and streamline legal operations firm-wide ●Continuously evaluate emerging AI tools and automation technologies for potential adoption at RLG ●Document all automation workflows and maintain version-controlled process libraries 1. Website & Mobile App Development ●Build, maintain, and enhance firm websites and client-facing portals for RLG and affiliated entities ●Handle front-end and back-end web development, ensuring performance, accessibility, and security ●Apply SEO fundamentals to improve firm visibility and search rankings ●Implement and monitor web security protocols to protect against unauthorized access and data exposure ●Develop and maintain native iOS and Android mobile applications — this is a major plus and a significant area of investment for RLG 1. Third-Party Integrations & Connectors ●Connect, configure, and manage third-party integrations including WhatsApp Business, Plaid, SharePoint, OneDrive, CRM tools, and Meta/Facebook platforms ●Build and maintain API integrations to automate data flows between firm systems and external services ●Ensure all integrations adhere to security and data privacy requirements ●Troubleshoot integration failures and ensure continuity of business-critical workflows 1. IT Support & Staff Training ●Provide responsive, hands-on IT support to attorneys and staff at all firm locations ●Develop and deliver training sessions to onboard staff onto new tools, workflows, and platforms ●Create clear, accessible documentation and user guides for firm technology systems ●Serve as the primary technical point of contact for day-to-day technology questions and issues QUALIFICATIONS Required ●2–5 years of experience in IT support, cybersecurity, AI/automation development, or a related field ●Proficiency in the Microsoft 365 ecosystem: Azure AD, Exchange Online, SharePoint, Teams, OneDrive, and Power Automate ●Demonstrated experience building and maintaining AI tools and workflow automation platforms ●Working knowledge of cybersecurity frameworks (NIST, SOC 2, or equivalent) ●Web development skills including HTML, CSS, and JavaScript; experience with React or a similar framework is a plus ●Strong problem-solving skills and the ability to diagnose and resolve technical issues independently ●Excellent written and verbal communication skills — able to translate complex technical concepts for non-technical audiences ● Native iOS and/or Android app development (Swift, Kotlin, React Native, or Flutter) — a MAJOR plus; RLG is actively looking to develop mobile applications Advantage applicant has: ●Experience with document automation in a legal or financial services environment ●Familiarity with New York State data privacy laws and legal industry compliance requirements ●Hands-on API integration experience (REST, webhooks, OAuth) ●Prior experience working at a law firm, title company, or financial institution WHAT RLG OFFERS ●Compensation commensurate with experience across all applicable fields — candidates with broader or deeper expertise will be compensated accordingly ●Flexible schedule — the firm will consider both full-time and part-time arrangements ●Hybrid work model with remote flexibility and presence at our Lawrence, NY office as needed ●A rare opportunity to build and own the entire technology infrastructure of a growing law firm from the ground up ●Direct access to firm leadership and meaningful input into how technology shapes the practice ●A collaborative, entrepreneurial environment with significant room for professional growth as RLG and its affiliated entities expand HOW TO APPLY Rosenberg Law Group PLLC is an equal opportunity employer. We welcome candidates from all backgrounds who meet the qualifications above. Submit your resume, a brief cover letter, and any relevant portfolio or work samples via CareerPlug. Applications will be reviewed on a rolling basis. We look forward to hearing from you.

Job DescriptionJob Description: Haider Engineering P.C. is seeking motivated Electrical Engineers (PE and non-PE) to join our team on a high-profile project with the New York City School Construction Authority (NYCSCA). This unique opportunity allows you to work directly within school facilities across all five boroughs, evaluating building conditions that help guide critical maintenance, repair, and capital improvement decisions. Whether you're an experienced engineer or looking to expand your skills in facility assessments, we provide paid training, professional development, and the chance to contribute to the safety and functionality of New York City's educational infrastructure. NOTE: The job location field is a placeholder. The project location is in all five boroughs of New York City. Duties: • Conduct visual inspections of school building systems and components using proprietary mobile applications on a company-issued iPad., • Prepare and submit daily reports detailing the condition of school facilities., • Collect data on completed building improvements and upgrades through coordination with school personnel, including custodial engineers and principals., • Accurately document and report deficiencies, including precise quantity counts., • Generate and issue “Priority Condition Reports” for any identified life safety or hazardous conditions., • Collaborate as part of a four-person inspection team on a daily basis., • Report to assigned school buildings by 8:30 AM each day, regardless of weather conditions.Qualifications:, • Solid understanding of electrical systems, including lighting, sound, and fire alarm components., • Bachelor’s degree in Engineering or a related field.We offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. At Haider Engineering P.C., you'll play an important role in helping maintain and improve the facilities where millions of students learn and grow. If you're looking for a rewarding engineering position that combines fieldwork, teamwork, and public impact, we'd love to hear from you. Apply today and help build a safer, stronger future for New York City's schools. About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Haider Engineering P.C. is an Equal Opportunity Employer.

Job Description The Project Engineer, with the assistance of the Project Team, coordinates all project activities to ensure cost, schedule, document control and quality standards are met. Under the direction of upper Management, the Project Engineer is expected to take on any/all tasks in the quest to learn the Electrical Construction Industry and the Company’s processes. Job Responsibilities: • Assisting with Design Work: Support more experienced engineers in designing electrical systems, components, etc. This may involve using software tools to create schematics, drawings, or models., • Documentation: Keeping accurate records and documentation is crucial in engineering. Engineers/apm responsible for documenting their work, writing reports, and maintaining records of design specifications and test results., • Collaboration: Engineers often collaborate with other engineers, and project personnel from different disciplines to complete projects and solve problems., • Learning and Professional Development: engineers spend time learning about the company's products, processes, and industry standards. They may also participate in training programs to enhance their technical skills and knowledge., • Fieldwork: Depending on the nature of the projects, engineers are required to visit job sites, participate in field installations, or assist in commissioning electrical systems., • Adhering to Codes and Standards: Engineers must familiarize themselves with relevant codes, standards, and regulations governing electrical design and installation to ensure that their work complies with legal and safety requirements., • Track Electrical installations and redline installation on field, • Continuous Improvement: Engineers are encouraged to seek feedback, learn from their experiences, and continuously improve their skills. They may be assigned mentors or supervisors who provide guidance and support in their professional development Qualifications: • Ability to work with a team., • Having organizational skills., • Ability to perform different tasks at the same time., • Having technical knowledge, • Ability to follow precise instructions., • Having IT skills with emphasis on Microsoft Office., • Being able to solve different types of problems., • Having good communication skills., • Being familiar with regulatory standards pertaining to the power industry., • 2D cad drawing Experience, • Familiar with NYC Electrical code, • Read and interpretate Electrical Drawings, • Create Excell spread sheets based off of schedule, • Excellent written and oral communication skills Education/Certifications • A College degree in Electrical Engineering required, • PMP certificate a plus, • SST certificate, • Osha certificate Advantages to Working at RMD Electric • Over 15 Years Owned and Operated, • Job training and mentorship, • Supportive Management Team, • Emphasis on professional development, employee satisfaction and work-life balance, • Competitive compensation packages, • Comprehensive benefits, • Paid holidays and vacation Benefits • 401(k) match, • Medical Insurance, • Vision insurance, • Dental Insurance, • Union shopCompany DescriptionRMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.RMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job Description GREAT OPPORTUNITY!!! ADE Systems, Inc. is one of the largest HVAC manufacturer’s representatives in the New York Metro and Northern New Jersey area who is seeking Entry level individuals with a technical/engineering background to join our growing team in our Freeport, NY office. Candidates will have the opportunity to use their engineering skillset to contribute to our Engineered Solutions Sales Team. Responsibilities • Reading and understanding mechanical drawings, • Ability to grasp an in depth knowledge of the products ADE represents, • Supply technical support either internally or externally, • Use of computer programs to complete processes, such as orders or quantitative take-offs Qualifications • Bachelor's Degree in Mechanical Engineering from four-year college or university, or one to two years of related experience and/or training, or equivalent combination of education and experience., • Written and verbal communication skills, • Computer skills preferred: Bluebeam, Ordering systems, Microsoft Outlook, Enterprise Resource Planning Software (Microsoft Navision) Salary & Benefits Overview • Opportunity for advancement., • Excellent benefits program including medical, dental, 401k, vacation, paid holidays., • Product training and support provided – in house and factory training., • Salary range based on experience. To learn more about our company and some of the products we represent please visit www.adehvac.com Company DescriptionThe Premier Manufacturers Representative of HVAC Products. For over 50 years, our reputation of excellence in the contracting, engineering and architectural communities, enables us to satisfy and exceed all of your HVAC needs. Air distribution, fan applications, air handling units, fan coils, VFDs, electric heat, humidification, and so much more. We have the knowledge and products to solve your HVAC problems.The Premier Manufacturers Representative of HVAC Products. For over 50 years, our reputation of excellence in the contracting, engineering and architectural communities, enables us to satisfy and exceed all of your HVAC needs. Air distribution, fan applications, air handling units, fan coils, VFDs, electric heat, humidification, and so much more. We have the knowledge and products to solve your HVAC problems.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Garden City, NY, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply., • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job DescriptionFull Job Description: Company Description: RLM Engineering is a full-service mechanical, electrical, plumbing and fire sprinkler design firm. The firm is focused on the building retrofit market in the NYC and Long Island area. RLM Engineering is seeking an electrical engineer with experience in tenant fit-out, electrical upgrades, electrical infrastructure design and fire alarm systems for a wide variety of building/facility renovation projects. This position will entail designing building systems and tenant spaces based on client’s needs. In addition to engineering design, duties will include writing specifications; CAD drafting; coordinating with other trades, performing site visits to client facilities; and coordinating with clients, sub-consultants, and regulatory agencies. Good communicator that will be capable of working face to face with clients daily. Ability to manage engineering design projects to provide a quality product for the client. Experience with AutoCAD and REVIT is required. We offer a work environment that rewards self-starters who manage and execute projects independently as well as competitive salaries, benefits, and opportunities for individuals to grow their engineering practices. Experience Required: • Bachelors Degree in Electrical Engineering or Equivalent., • 4+ years of Electrical Industry Experience., • Full-time in office position., • PE license preferred Benefits: • 401(k) retirement plan., • Health insurance., • Paid time off.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Job Description: Haider Engineering P.C., a rapidly expanding REI firm, needs Chief Inspector in the Nassau and Suffolk Counties for NYSDOT highway and bridge projects. NOTE: The work is spread all over Long Island. The job location in the listing is only for reference. Duties and Qualifications: • NICET III (or equivalent), • OSHA 10hr certification (preferred), • NYSDOT experience (preferred)We offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. Please contact for more details. Haider Engineering P.C. is an Equal Opportunity Employer.

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • Tool Reimbursement, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement, • A chance to work for the best in the business Job Type: Full Time Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Technician. This individual will be responsible for the effective diagnosis and repair of engine components including small engines, agricultural equipment, and other equipment sold in the market area. Their work must be completed safely, professionally, and in a timely manner. If you’re the kind of person who strives to do great work, excels in creative team environments, and lives for problem-solving this is the place for you. What You’ll Do • The successful candidate will perform complex diagnostics, service repairs, and maintenance work on customer and/or dealer-owned equipment., • Work must be completed at high levels of quality and safety., • Daily duties will include some customer contact, diagnosing, troubleshooting using diagnostic tools, and making repairs.Requirements:, • Must own and maintain their own tools (specialty tools provided by dealership), • Basic computer skills, • Ability to assemble and perform maintenance functions, • Able to work a varying work schedule/shift and be flexible to respond to after-hour calls, • Strong customer service skills, • Excellent oral communication and written skills, • Strong organizational skills Preferred • A minimum of 2-3 years’ experience as a mechanic working on small engines, diesel and gas engines, and small handheld components, • Experience with John Deere Equipment Education • High school diploma or GED Physical Requirements The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job Description The Manufacturing Engineer d evelop, implement and maintain manufacturing processes required to meet business needs for existing and new products. Utilize and support individual, team and quality/process improvement efforts to assure manufacturing processes meet requirements for process capability, safety, customer service and reliability. **Key Responsibilities: · Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation. · Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency. · Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production. · Maintain process documentation in accordance with established standards. · Establish and maintain preventive maintenance schedules for all processes and equipment. · Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost. · Present process concepts, implement approved solutions, and manage work to schedule and budget expectations. · Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability. · Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls. · Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance · Monitor production quality and ensure processes consistently meet required quality standards. · Troubleshoot and resolve production-related engineering issues. · Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability · Other duties as assigned **Education: ¨NBSP; **Bachelor’s Degree in Mechanical/Manufacturing or Electrical Engineering is required Experience: · 4 plus years of experience in a manufacturing engineering capacity · Metal fabrication experience is preferred **Skills/Knowledge/Abilities: · Effective communication skills both verbal and written are required · Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities · Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload · Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively · Must be highly collaborative and able to work in a team-based environment · Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners · Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions · Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems · Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information · Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work · Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Bilingual (English/Spanish) – needed You should be proficient in: • Industrial and Manufacturing Engineering, • Mechanical Troubleshooting Skills, • Mechanical Design & Engineering, • Engineering Degree, • metal fabrication

Job DescriptionJob Description: Haider Engineering P.C. is seeking motivated Mechanical Engineers (PE and non-PE) to join our team on a high-profile project with the New York City School Construction Authority (NYCSCA). This unique opportunity allows you to work directly within school facilities across all five boroughs, evaluating building conditions that help guide critical maintenance, repair, and capital improvement decisions. Whether you're an experienced engineer or looking to expand your skills in facility assessments, we provide paid training, professional development, and the chance to contribute to the safety and functionality of New York City's educational infrastructure. NOTE: The job location field is a placeholder. The project location is in all five boroughs of New York City. Duties: • Conduct visual inspections of school building systems and components using proprietary mobile applications on a company-issued iPad., • Prepare and submit daily reports detailing the condition of school facilities., • Collect data on completed building improvements and upgrades through coordination with school personnel, including custodial engineers and principals., • Accurately document and report deficiencies, including precise quantity counts., • Generate and issue “Priority Condition Reports” for any identified life safety or hazardous conditions., • Collaborate as part of a four-person inspection team on a daily basis., • Report to assigned school buildings by 8:30 AM each day, regardless of weather conditions.Qualifications:, • Strong knowledge of mechanical systems, including boilers, heating, and plumbing components., • Bachelor’s degree in Engineering or a related field.We offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. At Haider Engineering P.C., you'll play an important role in helping maintain and improve the facilities where millions of students learn and grow. If you're looking for a rewarding engineering position that combines fieldwork, teamwork, and public impact, we'd love to hear from you. Apply today and help build a safer, stronger future for New York City's schools. About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Haider Engineering P.C. is an Equal Opportunity Employer.

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job DescriptionRF Engineering Technician (Electronics Repair) 📍 Onsite | Manufacturing Environment 💰 $60,000 – $90,000 + Bonus Potential Overview We are seeking a hands-on RF Engineering Technician to support the repair, troubleshooting, and testing of complex electronic and RF equipment. This role is ideal for someone who enjoys bench-level work, solving technical problems, and working closely with engineering and production teams in a fast-paced manufacturing environment. Key Responsibilities • Troubleshoot and repair RF and electronic equipment down to the component level, • Diagnose operational failures using oscilloscopes, multimeters, and other test equipment, • Repair and test printed circuit boards, amplifiers, multiplexing systems, and related components, • Align, calibrate, and adjust equipment per engineering specifications and documented procedures, • Replace or reconstruct defective electronic and mechanical components, • Review and apply engineering change notices (ECNs), • Perform functional and performance testing to ensure equipment meets required standards, • Maintain detailed records of repairs, calibrations, and test results in a database system, • Support investigations and collaborate with Production, Test, Engineering, and Field Service teams, • Assist with additional technical tasks as neededRequired Qualifications, • Associate’s or Bachelor’s degree in Electronics, Electrical Engineering, or related field (or equivalent hands-on experience), • 1–3 years of experience in electronics or RF repair / test technician roles, • Strong troubleshooting skills with electronic components and circuits, • Experience working with:, • Oscilloscopes, • Multimeters, • RF / microwave (MW) systems, • Ability to perform component-level diagnostics and repair, • Comfortable using hand tools for mechanical and electronic work, • Strong attention to detail and documentation accuracyPreferred Qualifications, • Experience with RF and microwave systems, • Familiarity with test equipment and circuit testing methodologies, • Background working with:, • Printed circuit boards (PCBs), • Amplifiers, • Multiplexing systems, • Exposure to manufacturing or production environments, • Strong problem-solving mindset and willingness to learnWhy This Role, • Hands-on technical role with direct impact on product quality and performance, • Opportunity to work with advanced RF and electronic systems, • Collaborative team environment with training and mentorship, • Strong exposure to cross-functional engineering and production teams, • Competitive compensation + comprehensive benefits + bonus potentialWork Environment, • Onsite manufacturing floor with dedicated workbench setup, • Combination of bench repair, testing stations, and specialized test chambers, • Work closely with a lead technician and supervisor for support and development, • Structured schedule:, • 9/80 workweek (9-hour days, alternating Fridays off/shortened), • Bi-weekly payIdeal Candidate Profile You are a detail-oriented, hands-on technician who: • Enjoys troubleshooting and repairing electronic systems at the component level, • Is comfortable using test equipment and interpreting results, • Thrives in a team-oriented, fast-paced manufacturing environment, • Is eager to learn and build deeper expertise in RF systems and electronics, • Job Type & Location This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jul 25, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description The Company Friedman Vartolo LLP is a fast-growing, New York-based law firm specializing in real estate and default services, with over 300 employees providing top-tier legal services to our clients in seven states. While our legal expertise sets us apart, it's our mindset that drives us forward. We bring a fresh, fast-paced energy that drives our momentum and shapes how we approach every challenge. We are a company that chooses to dig deeper, solving problems at the root instead of settling for surface fixes. Here, there are no passengers because every individual adds value, owns outcomes, and moves the firm forward. With an underdog mentality, we embrace constant elevation, always sharpening, always climbing, and never coasting. When challenges come, we row together and lean in as one team to get the job done, no matter what. The Position We are seeking a Production Reliability Engineer to own the operational health of our deployed internal application portfolio. The portfolio is growing rapidly - many new applications shipping every week - and we need a dedicated owner ensuring that what we deploy stays reliable, secure, and performant over its lifetime, and that the operational footprint stays manageable as the portfolio grows. This is a hands-on role for an engineer who thinks systematically about reliability, communicates clearly during incidents, and knows when to retire a deployed application that has outlived its usefulness. You will be the source of truth for "is our portfolio healthy" and the decision-maker on what gets maintained, what gets fixed, and what gets retired. You will work closely with the Senior Technology Manager, a DevOps Engineer (counterpart role), and a group of Production Engineers who own initial deployment and 30-day iteration of each application. Key Responsibilities: • Own the operational health of the firm's deployed internal application portfolio, • Lead incident response for production issues; serve as on-call rotation lead, • Manage security patching, dependency updates, base image refreshes, and certificate rotation across the deployed portfolio, • Conduct monthly triage of every deployed application - usage levels, error rates, security posture, retire/keep recommendation, • Maintain the application retirement queue and drive retire/deprecate decisions for low-usage or obsolete applications, • Define and track Service Level Objectives (SLOs) for application uptime, performance, and reliability, • Partner with the DevOps Engineer to ensure deployment pipelines incorporate reliability requirements from day one, • Produce a weekly portfolio health report - uptime trends, open incidents, security posture, retire/deprecate decisions, • Conduct incident postmortems and drive remediation actions to completion, • Contribute to security and compliance posture work (SOC2 readiness, Vanta evidence collection) as it relates to operational reliability Required Skills & Qualifications: • 5+ years professional experience in Site Reliability Engineering, DevOps, production engineering, or equivalent, • Strong incident-response experience - leading incidents, not just participating; comfortable owning the on-call rotation, • Experience defining and tracking SLOs and error budgets for production systems, • Strong Azure cloud experience (or directly comparable AWS / GCP experience), • Hands-on experience with monitoring, alerting, and observability tooling (Azure Monitor, Application Insights, Datadog, New Relic, or equivalent), • Comfortable reading code in multiple languages (TypeScript, Python, C# preferred) for incident triage and root-cause analysis, • Understanding of cloud security fundamentals - patching cadence, dependency management, secret rotation, base image hygiene, • Excellent written communication for incident comms, postmortems, and portfolio reporting Preferred Skills & Qualifications • Experience managing a portfolio of small-to-medium applications, rather than a single monolith, • Experience with security tooling (Huntress, Microsoft Defender, Vanta, similar), • Familiarity with Databricks, data warehouses, or analytics platforms, • Experience driving retire/deprecate decisions and the conversations that accompany them, • Experience in regulated industries (legal, financial services, healthcare), • Familiarity with compliance frameworks (SOC2, ISO 27001) from an operational-evidence perspective Benefits Friedman Vartolo LLP is proud to offer a comprehensive and competitive benefits package designed to support the well-being and security of our team. Our benefits include: • Paid parental leave options, • Short and long-term disability leave options, • Comprehensive medical, dental, and vision insurance, • Flexible Spending Accounts (FSA) and Dependent Care plans, • Commuter benefits including transit, and parking options, • Pet insurance to help care for your furry family members, • 401(k) retirement plans with employer contributions, • Gym and fitness reimbursements to support a healthy lifestyle, • Annual business expense reimbursements for attorneys, • Annual $500 travel budget to attend firm sponsored social events, • Hybrid work flexibility available after 90 days of employment * *Dependent upon specific position requirements and firm business needs Equal Opportunity Employer Friedman Vartolo LLP is an equal opportunity employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. ADA Compliance Friedman Vartolo LLP is committed to providing equal employment opportunities and complying with the Americans with Disabilities Act (ADA). We will provide reasonable accommodations to qualified applicants and candidates with disabilities, unless doing so would impose an undue hardship. If you require a reasonable accommodation to complete your application, participate in a job interview, or take part in any stage of the hiring process, please contact our Recruitment Team at recruitment@friedmanvartolo.com. Job Posted by ApplicantPro

Job DescriptionSenior Quality Assurance Engineer Confidential Client | Long Island, NY Area A growing precision manufacturing organization serving highly regulated industries is seeking a Senior Quality Assurance Engineer to lead product and process quality initiatives from new product introduction through full-scale production. This role is ideal for a hands-on quality professional who thrives in a precision machining environment and enjoys partnering closely with manufacturing, engineering, operations, and supply chain teams to drive continuous improvement and customer satisfaction. Position Overview The Senior Quality Assurance Engineer will own quality planning, process controls, measurement systems, statistical analysis, nonconformance management, and regulatory compliance activities. This individual will serve as the primary quality resource on the manufacturing floor, helping ensure products meet stringent customer, industry, and regulatory requirements while reducing variation and improving process capability. Key Responsibilities Manufacturing & Shop Floor Quality • Serve as the primary quality resource for machinists, assemblers, and production teams., • Support first article inspections, production startups, process validations, and issue resolution., • Lead daily quality reviews, root cause investigations, containment activities, and corrective actions., • Train operators on inspection methods, SPC interpretation, measurement techniques, and quality procedures.Quality Planning & New Product Introduction, • Develop and maintain Control Plans, Inspection Plans, PFMEAs, and related quality documentation., • Support APQP, PPAP, and First Article Inspection (AS9102) activities., • Translate GD&T requirements into effective inspection and measurement strategies., • Drive traceability and quality requirements from customer specifications through production and final acceptance.Metrology & Measurement Systems, • Support advanced inspection technologies including CMMs, vision systems, laser scanning, and surface metrology equipment., • Perform Measurement System Analysis (MSA), Gage R&R studies, and capability assessments., • Maintain calibration programs and measurement system compliance.Process Control & Continuous Improvement, • Establish and maintain SPC programs for critical product characteristics., • Conduct capability studies and implement process improvement initiatives., • Lead root cause analysis, NCR/MRB activities, CAPA programs, and corrective action effectiveness verification., • Participate in Lean Manufacturing, Six Sigma, DOE, Kaizen, and mistake-proofing initiatives.Customer & Regulatory Quality, • Support customer audits, source inspections, complaint investigations, and quality reviews., • Maintain compliance with applicable quality management systems and regulatory requirements., • Ensure audit readiness and adherence to customer, industry, and internal quality standards.Required Qualifications, • Bachelor's degree in Mechanical, Manufacturing, Industrial, Materials Engineering, or a related technical discipline., • 5+ years of quality engineering experience within a precision machining or advanced manufacturing environment., • Experience supporting tight-tolerance CNC machining operations, including milling, turning, EDM, grinding, or similar processes., • Strong knowledge of:, • GD&T (ASME Y14.5), • SPC and capability studies, • MSA and Gage R&R, • PFMEA and Control Plans, • NCR, MRB, CAPA, and 8D methodologies, • PPAP and First Article Inspection processes, • Proficiency with statistical analysis software such as Minitab., • Experience working in regulated manufacturing environments such as aerospace, medical device, defense, or similar industries.Preferred Qualifications, • Six Sigma Green Belt or Black Belt certification., • ASQ Certified Quality Engineer (CQE) certification., • Internal auditing experience within AS9100 and/or ISO 13485 environments., • Experience with electronic QMS platforms and ERP-integrated quality systems., • Familiarity with Nadcap-controlled processes and supplier quality programs., • Experience supporting medical device, aerospace, or other highly regulated production environments.Compensation & Benefits, • Base salary: $85,000 - $110,000, depending on experience and qualifications., • Performance-based incentive opportunities., • Comprehensive medical, dental, and vision coverage., • 401(k) with company contributions., • Paid time off and holidays., • Tuition reimbursement and professional development support., • Additional employee wellness and benefit programs.Why Consider This Opportunity?, • Join a stable and growing precision manufacturing organization., • Work with complex, high-performance products serving regulated industries., • Be a key contributor to quality, operational excellence, and continuous improvement., • Enjoy strong growth potential within a collaborative engineering and manufacturing environment.In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $85k-$110k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $85,000.00 to $110,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Manufacturing Engineer develop, implement and maintain manufacturing processes required to meet business needs for existing and new products. Utilize and support individual, team and quality/process improvement efforts to assure manufacturing processes meet requirements for process capability, safety, customer service and reliability. Key Responsibilities: · Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation. · Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency. · Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production. · Maintain process documentation in accordance with established standards. · Establish and maintain preventive maintenance schedules for all processes and equipment. · Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost. · Present process concepts, implement approved solutions, and manage work to schedule and budget expectations. · Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability. · Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls. · Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance · Monitor production quality and ensure processes consistently meet required quality standards. · Troubleshoot and resolve production-related engineering issues. · Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability · Other duties as assigned Education: Bachelor’s Degree in Mechanical/Manufacturing or Electrical Engineering is required Experience: · 4 plus years of experience in a manufacturing engineering capacity · Metal fabrication experience is preferred Skills/Knowledge/Abilities: · Effective communication skills both verbal and written are required · Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities · Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload · Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively · Must be highly collaborative and able to work in a team-based environment · Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners · Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions · Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems · Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information · Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work · Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Bilingual (English/Spanish) – needed #2127OS

Job Description About EWBC Exterior Wall & Building Consultants, Inc. (EWBC) is a specialty contractor providing construction labor, carpentry, project management, and specialty contracting services throughout the New York metropolitan area. We partner with many of the region's leading owners, developers, construction managers, and general contractors on commercial, residential, institutional, and infrastructure projects. We are seeking an organized, motivated, and driven Project Engineer to join our growing operations team. This position offers an excellent opportunity to gain hands on experience in construction operations while working directly with senior management and field personnel. The ideal candidate is looking to build a long-term career with a company that promotes from within. Position Summary The Project Engineer is responsible for supporting the day to day operations of multiple active construction projects. This role combines project coordination, labor management, payroll administration, billing support, field operations, and client communication to ensure projects are executed safely, efficiently, and profitably. The successful candidate will work closely with Project Managers, Superintendents, Foremen, clients, and the accounting department while gaining exposure to all aspects of construction management. Responsibilities • Coordinate daily labor assignments with Project Managers and field supervision., • Prepare and maintain manpower reports, labor tracking logs, and daily work reports., • Process weekly payroll by reviewing timecards, labor hours, and supporting documentation for accuracy., • Assist in preparing client billings, invoices, payment applications, and supporting documentation., • Monitor accounts receivable and assist with collections by coordinating directly with clients regarding outstanding invoices., • Assist in preparing change orders, time and material tickets, and supporting cost documentation., • Monitor labor productivity and compare production against project budgets., • Assist with project scheduling and manpower planning., • Coordinate material deliveries, equipment needs, site access, and project logistics., • Track project costs and assist Project Managers with budget reporting., • Maintain project documentation, daily reports, meeting minutes, and photographic records., • Ensure employee certifications, safety documentation, and project records remain current and compliant., • Participate in site safety walkthroughs and assist with documenting corrective actions., • Coordinate communication between field personnel, clients, subcontractors, vendors, and internal departments., • Utilize Microsoft Office and project management software to maintain project records and track progress., • Assist with project closeout documentation and final project deliverables., • Support Project Managers with all aspects of project administration as required. Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Engineering Technology, Business Management, or a related field preferred., • One to three years of construction or project management experience preferred. Strong entry level candidates are encouraged to apply., • Excellent organizational and time management skills., • Strong verbal and written communication skills., • Ability to manage multiple priorities in a fast paced environment., • Proficiency in Microsoft Excel, Outlook, and Word., • Valid driver's license and willingness to travel throughout the New York City metropolitan area. What We Offer • Competitive salary based on experience., • Medical, dental, and vision insurance., • 401(k), • Paid vacation, sick time, and company holidays., • Professional development and training opportunities., • Opportunity to work on some of the New York area's most recognizable construction projects., • A collaborative, team-oriented environment with significant opportunities for career advancement. Why Join EWBC? At EWBC, you'll work alongside experienced construction professionals on challenging, high profile projects throughout the New York metropolitan area. We believe in investing in our employees, providing opportunities for growth, and promoting from within. If you're looking for a career where you can make an impact and continue to develop professionally, we'd like to hear from you.

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionRF Engineering Technician (Electronics Repair) 📍 Onsite | Manufacturing Environment 💰 $60,000 – $90,000 + Bonus Potential Overview We are seeking a hands-on RF Engineering Technician to support the repair, troubleshooting, and testing of complex electronic and RF equipment. This role is ideal for someone who enjoys bench-level work, solving technical problems, and working closely with engineering and production teams in a fast-paced manufacturing environment. Key Responsibilities • Troubleshoot and repair RF and electronic equipment down to the component level, • Diagnose operational failures using oscilloscopes, multimeters, and other test equipment, • Repair and test printed circuit boards, amplifiers, multiplexing systems, and related components, • Align, calibrate, and adjust equipment per engineering specifications and documented procedures, • Replace or reconstruct defective electronic and mechanical components, • Review and apply engineering change notices (ECNs), • Perform functional and performance testing to ensure equipment meets required standards, • Maintain detailed records of repairs, calibrations, and test results in a database system, • Support investigations and collaborate with Production, Test, Engineering, and Field Service teams, • Assist with additional technical tasks as neededRequired Qualifications, • Associate’s or Bachelor’s degree in Electronics, Electrical Engineering, or related field (or equivalent hands-on experience), • 1–3 years of experience in electronics or RF repair / test technician roles, • Strong troubleshooting skills with electronic components and circuits, • Experience working with:, • Oscilloscopes, • Multimeters, • RF / microwave (MW) systems, • Ability to perform component-level diagnostics and repair, • Comfortable using hand tools for mechanical and electronic work, • Strong attention to detail and documentation accuracyPreferred Qualifications, • Experience with RF and microwave systems, • Familiarity with test equipment and circuit testing methodologies, • Background working with:, • Printed circuit boards (PCBs), • Amplifiers, • Multiplexing systems, • Exposure to manufacturing or production environments, • Strong problem-solving mindset and willingness to learnWhy This Role, • Hands-on technical role with direct impact on product quality and performance, • Opportunity to work with advanced RF and electronic systems, • Collaborative team environment with training and mentorship, • Strong exposure to cross-functional engineering and production teams, • Competitive compensation + comprehensive benefits + bonus potentialWork Environment, • Onsite manufacturing floor with dedicated workbench setup, • Combination of bench repair, testing stations, and specialized test chambers, • Work closely with a lead technician and supervisor for support and development, • Structured schedule:, • 9/80 workweek (9-hour days, alternating Fridays off/shortened), • Bi-weekly payIdeal Candidate Profile You are a detail-oriented, hands-on technician who: • Enjoys troubleshooting and repairing electronic systems at the component level, • Is comfortable using test equipment and interpreting results, • Thrives in a team-oriented, fast-paced manufacturing environment, • Is eager to learn and build deeper expertise in RF systems and electronics Job Type & Location This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jul 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Express Employment Professionals-Farmingdale, NY is seeking an experienced Senior Control Systems Engineer to lead and manage our in‑house Control Panel Shop. This role requires strong technical expertise in industrial control panel design and fabrication, as well as the leadership skills needed to guide a team of technicians and collaborate with sales staff to support business growth. Key Responsibilities • Manage daily operations within the Control Panel Shop, ensuring efficient and high‑quality panel fabrication., • Design and draft small industrial control systems using AutoCAD Electrical, including schematics, panel layouts, bills of materials, and special details., • Select, specify, and procure all components required for control panel builds., • Partner with Sales to develop opportunities and drive panel shop revenue., • Program and configure Programmable Logic Controllers (PLCs), HMI interfaces, and Variable Frequency Drives (VFDs) for various control applications., • Conduct factory testing of controls and finished panels to ensure compliance with applicable standards., • Ensure all control panels meet UL 508A requirements; maintain strong working knowledge of UL compliance standards., • Provide technical support to customers—primarily over the phone, with occasional on‑site service when necessary., • Supervise, mentor, and support Panel Shop Technicians, fostering a collaborative and positive team environment., • Use Microsoft Office Suite (Word, Excel) for documentation and reporting., • Utilize SAP for sales, procurement, production orders, and inventory management (training provided if needed).Qualifications, • Bachelor’s degree in Engineering or equivalent design and industrial control experience., • Strong proficiency in AutoCAD Electrical for control system design., • Hands‑on experience designing, assembling, and testing industrial control panels., • Demonstrated ability to program PLCs and HMIs; experience with VFD setup and testing., • Familiarity with UL 508A standards and certified panel shop processes., • Excellent communication and leadership skills; ability to guide technicians and interact effectively with cross‑functional teams., • Proficiency with Microsoft Word and Excel., • Experience with SAP is helpful but not required (training available). #2127LI

Job DescriptionJob Title: Associate Civil EngineerRequisition: 82435PSEG Company: PSEG Long IslandSalary Range: $ 67,200 - $ 106,400Work Location Category: Hybrid Fixed - Hicksville, NY We’re one of the country’s largest energy companies, with a vision of powering a future where people use energy more efficiently and it’s safer and delivered more reliably than ever. We’re also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day. Here, you’ll have the stability and exciting opportunities that come with being a Fortune 500 company — along with a supportive, friendly work environment where your contributions are valued. We know life isn’t one-size-fits-all, and neither is work. That’s why we offer flexible work options depending on the role. In support of this model, roles have been categorized into one of three work location categories: • Onsite – roles where employees are expected to be onsite daily., • Hybrid fixed – roles that are a mix of remote work and onsite work fixed days each week., • Hybrid flexible – roles that are a mix of remote work and onsite work, but the onsite requirements have greater flexibility. (i.e. 5-8 days a month vs. set days each week). As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits designed to support your total well-being: medical, dental, vision, paternal leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off. More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you’re looking for a place where you can build a meaningful career and help power and support our communities, we’d love to welcome you to the team. PSEG is not offering visa sponsorship for this position. Job Summary:As the Civil Engineer, your responsibility is to perform engineering and design to ensure successful completion of Long Island Transmission & Distribution construction projects. Job Responsibilities: • Prepare & check civil engineering calculations and drawings in accordance with the latest industry codes & standards using computer programs such as TeamCenter, AutoCad, Staad III, Microsoft Office, etc. in support of the modifications and additions., • Approve vendor drawings and shop drawings. Prepare, update and analyze cost estimates and budget documents., • Evaluate soil boring data and soil reports. Determine the load bearing capacity and settlement parameters for foundation design. Select pile type and furnish design., • Participate in site investigations, prepare as-built sketches of existing field conditions for design purposes, witness & perform key inspections during the course of construction and resolve field problems encountered during construction., • Participate in project meetings for the development and subsequent progress of projects with civil engineering requirements. Prepare project documents, prepare bid packages, prepare contract documents, prepare specifications, evaluate contractor proposals and participate in contractor pre-award meetings., • Prepare general scope of work and procurement documents to obtain outside consultants for engineering assistance. Monitor consultants as work progresses. Evaluate and approve consultants’ final reports, drawings & specifications., • Perform field inspections and prepare formal inspection reports with recommendations for existing facilities regarding safety, repair and modification. Perform field inspections and testing of various secondary containment systems for petroleum and hazardous material products. Job Specific Qualifications: • BS Degree in Civil Engineering., • Strong knowledge of structural analysis, reinforced concrete, structural steel and soil mechanics as well as marine structures., • Knowledge of AISC, ACI, ASCE, NESC, NYSDOT, NYS & local building codes., • Familiarity with document management systems ( e.g.TeamCenter), 3D structural analysis and design software (i.e., Staad III) and AutoCAD., • Knowledge of ANSI, ASTM, National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation (latest codes). Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Experience with using Microsoft Office computer programs such as Word, Excel, Access and Outlook., • Must possess a valid U.S. Driver's License and maintain a satisfactory driving record. Desired:, • EIT Certificate and the ability to obtain Professional Licensure in NYS., • Knowledge of engineering design and analysis of underground electric transmission systems including 23-345 KV pipe type cable and solid dielectric cable systems. Knowledge of AutoCAD and TeamCenter., • Knowledge of the National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation. Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Demonstrated verbal, written, interpersonal communication skills and computer skills. Some positions at PSEG require access to information covered by the Department of Energy’s regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: (1) a citizen or national of the USA; OR (2) a lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR (3) a citizen, national, or permanent resident of a “Generally Authorized” destination on the attached list and not also a citizen, national, permanent resident of any country not listed; OR (4) a “Protected Individual” under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)). As an employee of PSEG Long Island, you should be aware that during storm/outage restoration efforts, you may be required to perform functions different from normal operations and work extended hours beyond your regular work schedule. You may also be required to work on premise or in an alternate location as directed by the company. For all roles, PSEGLI’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you are a current PSEG employee and offered an opportunity with PSEG Long Island, you will be treated as a new hire. Please note that as a new hire to the Long Island subsidiary, your benefits will change and generally will be consistent with other similarly situated PSEG Long Island new hires. Similarly, for PSEG Long Island employees who accept job opportunities with PSEG or any of its subsidiaries (other than PSEG Long Island), their benefits will change and generally be consistent with other similarly situated new hires of that company. PSEGLI is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. PSEGLI is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com. If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description FTC has immediate opportunities for experienced Special Inspectors and Field Engineers to be part of our team. • Complete assigned inspection as scheduled by dispatch, • Perform scheduled inspection during the time assigned – inspect, review and submit reports according to NYS DOB code and approved drawings, • Usual schedule is 7am-3:30pm, • Perform all other duties as assigned by your supervisor or manager.Qualifications, • Ideal candidates must hold certifications from ICC, AWS, NICET and/or ACI including:, • ICC Commercial or Residential Certification required., • Technical, Associate’s, or Bachelor’s Degree pertaining to the Engineering field (Civil, Mechanical, Environmental, etc.) a plus., • Candidates must be familiar with the New York City Building Code, • Ability to read prints and find inspection locations, • Ability to produce inspection reports according to company standards, • Must be proficient in Microsoft Word, Excel, and Outlook., • Reliable means of transportation necessary., • Extensive knowledge of industry standards, • Must be punctual, reliable with good attention to detail, • Ability to work various shifts, • Ability to travel numerous job sites daily, • Highly motivated team player with a strong work ethic, • Able to communicate effectively with a variety of project managers, • Prepare and electronically submit daily reports, • Organized and efficient, • Authorized to work in the U.S with a valid driver license Additional Information FTC/SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit www.socotec.us or ftcny.com Hourly rate: $25-55/hr SOCOTEC is an Equal Opportunity Employer.

Job Description We are hiring! ACS System Associates, Inc. established in 1983 is one of ENR top rated MBE privately held HVAC Commercial Companies. ACS is renowned for projects such as World Trade Center, Brooklyn Navy Yard, Stony Brook Hospitals, and a wide variety of both private and public work projects in the Greater New York area including Westchester, New York City, and Long Island. The diverse portfolio includes retail, office, industrial, hotel, schools, and hospital projects. We have an internal division complete with engineers, architects, draftsmen, project managers, and supervisors. These specialists work with clients such as Tishman, Turner, and Lend Lease to make sure each project is done effectively, on time, and within budget. We offer a lucrative benefits package to our employees that include Medical, Dental, Vision, 401K, PTO, Life Insurance, Education reimbursement to name a few. Headquartered in Long Island, NY with additional offices in Westchester County. We are seeking an experienced Mechanical Professional Engineer (PE). Key Duties & Responsibilities: • Design, review, and seal mechanical engineering drawings and specifications in accordance with New York requirements., • Lead HVAC, plumbing, and mechanical system design for commercial and industrial projects., • Manage multiple projects while maintaining schedules and budgets., • Perform engineering calculations, equipment selection, and code compliance reviews., • Conduct site visits and oversee construction administration as needed., • Interface with contractors, vendors and regulatory agencies. Requirements: • Bachelor's degree in Mechanical Engineering, • Current New York State Professional Engineer (PE) license required., • Minimum of 5 years of mechanical engineering design experience., • Strong knowledge of the New York Building, Mechanical, and Energy Codes plus applicable industry standards., • Proficiency with AutoCAD and/or Revit; familiarity with HVAC load calculation software is preferred. Primary Location: United States-New York-Hicksville Other Locations: United States-New York-Westbury Other Locations: United States-New York-Mount Vernon Applicants must be authorized to work in the U.S. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. • Job Type: Full-timeCompany Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts., • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential. With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as an Electrical Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD Electrical, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • Provide technical support on the products we manufacture Design Engineer Necessary Qualifications • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Level 1 Helpdesk Engineer (MSP) 📍 Hicksville, NY | Hybrid (Onsite Dispatch as Needed) 🕒 Full-Time About Lincoln IT Lincoln IT is a growing Managed Services Provider supporting clients in finance, legal, healthcare, and other regulated industries. We focus on delivering reliable IT, strong client relationships, and clear career growth for our team. The Role We’re looking for a Level 1 Helpdesk Engineer who enjoys helping people, solving problems, and building a career in IT. You’ll be the first point of contact for client support requests, working in a fast-paced MSP environment with exposure to a wide range of technologies. This role includes both remote support and occasional onsite dispatches to client locations. What You’ll Do Serve as first-line support for end users via phone, email, and ticketing system Troubleshoot and resolve issues with: Windows desktops and laptops Printers and peripherals Microsoft 365 (Outlook, Teams, OneDrive, SharePoint) Basic networking and connectivity issues Escalate complex issues to Level 2/3 engineers with proper documentation Perform onsite visits for installations, troubleshooting, and remediation Document all work clearly in the ticketing system (ConnectWise preferred) Assist with user onboarding/offboarding (accounts, permissions, hardware setup) Follow SLAs and internal processes to deliver consistent support Requirements 1–2 years of experience in Helpdesk, Desktop Support, or similar role Strong working knowledge of Windows and Microsoft 365 Basic understanding of networking concepts (DNS, DHCP, TCP/IP) Excellent communication and customer service skills Ability to multitask and prioritize in an MSP environment Reliable transportation and willingness to travel locally (mileage reimbursed) Experience with ConnectWise, IT Glue, or similar tools is a plus CompTIA A+, Network+, or similar certifications preferred (or working toward) Why Join Lincoln IT Competitive salary and benefits Hands-on experience across diverse client environments Clear growth path within a Managed Services organization Ongoing training and mentorship Supportive, team-oriented culture Powered by JazzHR QRrwMlQQTW

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're seeking driven and enthusiastic professionals to join our team, empower lives, fuel businesses, and drive innovation. Connectivity is now longer a luxury, but a necessity. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. Our successes, now and in the future, are powered by our amazing product, a commitment to our people and culture, and the connections we make in our communities. If you are resourceful, collaborative, and passionate about delivering consistent excellence, Optimum is for you! We are seeking an experienced and forward-thinking Manager of Customer Identity and Access Management (CIAM) to lead our enterprise identity practice. In this role, you will define and execute the strategy for our customer identity platform while overseeing day-to-day operations. You will play a critical role in modernizing authentication across the organization, transitioning from legacy approaches to secure, scalable, standards-based identity solutions. This role combines strategic direction, architectural oversight, and team leadership. Your work will directly impact the security posture, regulatory compliance, and customer experience of our digital products. CIAM Platform Ownership & Governance • Own and operate the enterprise customer identity platform, including IDP configuration, directory management, and user lifecycle (Joiner/Mover/Leaver) processes., • Define and enforce identity standards across protocols such as OAuth2, OpenID Connect (OIDC), SAML, and SCIM., • Design and maintain authentication policies, including adaptive and risk-based controls, to balance security and user experience., • Oversee identity workflows for provisioning, de-provisioning, and orchestration across systems., • Ensure platform reliability and performance, including service-level objectives (SLOs), incident response, and continuous improvement. Authentication Modernization & Engineering Enablement • Lead the enterprise transition from legacy authentication approaches to modern CIAM solutions., • Establish scalable authentication patterns, including SSO, MFA, passwordless, and federated identity., • Develop migration frameworks, playbooks, and reusable integration patterns for application teams., • Track adoption progress, define KPIs, and communicate roadmap updates, risks, and outcomes to senior leadership., • Evaluate emerging capabilities (e.g., passkeys, device trust) and align adoption with the enterprise security strategy. Application Partnership & Developer Enablement • Serve as the primary IAM advisor to application development teams, guiding secure and scalable identity integrations., • Provide architectural guidance on authentication flows, token management, and session design., • Build developer enablement resources, including documentation, reference implementations, and onboarding support., • Establish engagement models (e.g., office hours, communities of practice) to promote self-service adoption., • Partner with platform engineering, DevOps, and API teams to integrate identity into CI/CD pipelines and modern architectures. Security, Risk & Compliance • Ensure CIAM platform compliance with regulatory and contractual requirements (e.g., SOX, PCI-DSS, SOC 2) through embedded controls and audit readiness., • Partner with Security, GRC, and SOC teams on identity risk management, including access reviews and threat detection., • Define and monitor identity security signals (e.g., account takeover, credential abuse) and support SIEM integration., • Oversee vulnerability management and security posture of identity systems and supporting services. Team Leadership & Organizational Development • Lead, mentor, and grow a high-performing IAM engineering team., • Define team structure, roles, and capabilities aligned to enterprise identity strategy., • Foster a culture of accountability, continuous learning, and psychological safety., • Build strong cross-functional partnerships with Product, Security, Legal, Privacy, and Customer Experience teams., • Manage vendor relationships and operating budget for CIAM platforms, tooling, and services. Required • Bachelor’s degree in Computer Science, Information Systems, Cybersecurity, or related field (or equivalent experience), • 7+ years of experience in Identity & Access Management, cybersecurity, or a related field, • 3+ years of experience leading or managing technical teams, • Hands-on experience with CIAM platforms and modern identity standards (OAuth2, OIDC, SAML, SCIM, FIDO2/WebAuthn), • Proven experience leading large-scale identity or authentication modernization initiatives, • Ability to translate complex IAM concepts into clear guidance for technical and non-technical stakeholders, • Experience operating high-availability systems, including SLO management and incident response, • Familiarity with compliance frameworks such as SOX, SOC 2, and PCI-DSS Preferred • Certifications in consumer identity platforms, • Experience with Customer Identity and Access Management (CIAM) patterns: progressive profiling, social login, consent management, and customer-facing MFA enrollment UX, • Familiarity with at least one modern programming language (Go, Java, Python, Node.js) sufficient to review integration code and guide teams on SDK usage, • Experience with cloud-native infrastructure (AWS, Azure, or GCP) and integrating consumer identity platforms with cloud IAM services, • Exposure to Zero Trust architecture principles and practical implementation via CIAM platform or Device Trust policies, • Working knowledge of SIEM integration for identity telemetry At Optimum, every action and interaction we take part in, is driven by our three Guiding Principles: Do What’s Right, Drive One Optimum, and Make It Happen. These aren’t just words, they help us build trust, create real community, and embrace new ways of thinking. Our employees are empowered to do the right thing for our customers and co-workers and to recognize and reward these behaviors when we see them. It’s all part of the bigger picture of “Be The Difference” where each employee knows they have the power to enact real change, share new ideas, and understand that learning never stop. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team. Together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company’s discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our _ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in New York is 133,661.00 - 219,586.00 / year. For other locations, please inquire with your recruiter. The rates/ranges provided herein are the anticipated pay at the time of hire, and do not reflect future job opportunity. We appreciate your interest in this opportunity. Applicants must be authorized to work for ANY employer in the U.S. Please note that at this time, we do not provide visa sponsorship for employment.

Responsibilities: \n\n • Responsible for assisting and coordinating the development of RFPs for generation and transmission, directs the evaluations of proposals and prepares recommendations to senior management and LIPA for selection. The projects include renewable and/or non-renewable resources, such as Offshore Wind, Solar, Fuel Cells, Energy Storage and Smart Grid REV, as well as conventional generation.\n, • Responsible for ensuring ongoing continuous improvement with application of complex LSS tools and comprehensive Stakeholder communication and Stakeholder Management plan. Skill set and in depth knowledge of regulatory and policy aspect is required to perform this function.\n, • Provides technical advice and guidance in the procurement of new power generation and transmission resources and the development of power purchase, easement etc.\n, • Requires good understanding of the costs and technical details associated with both renewable and conventional generation technologies, various interconnection schemes for those technologies.\n, • Knowledge of the RFP process for LIPA, diligent documentation of the procurement process to ensure approval of the PPAs as well understanding of legal perspective associated with the procurements, commercial contracts and key decisions such as selection or rejection of awards, evaluations, determining performance, price negotiations, cancellation or modification of contracts etc.\n, • Assist in development of strategy for New York State CLCPA implementation, Clean Energy Standard compliance and implementation as well as execution of the projects to comply with FERC, NERC, NYISO and New York State policy and regulatory mandates.\n, • Provides end to end assistance for project development to contracted resource projects.\n, • Requires knowledge of project management function and requires through understanding of political and community issues, permitting processes, regulatory developments and requirements, core project management and coordination skills with internal as well as external stakeholders.\n\n \n Job Qualifications: \n\n • Bachelor’s degree in engineering (desired electrical)\n, • Project management and contract management experience.\n, • Good knowledge of handling and negotiating commercial contracts\n, • Understanding of T&D system and generation aspect.\n, • Strong organization skills, attention to detail plus leadership skills and effective verbal and written communication skills needed.\n

GCP certifications such as Associate Cloud Engineer or Professional DevOps Engineer. Join our team as a GCP DevOps Engineer and play a crucial role in designing, building, and maintaining modern cloud infrastructure solutions. Experts contribute their diverse subject matter knowledge across domains

Electrical Engineering Professors to contribute expertise to a high-impact project advancing AI research and assessment technology. PhD or advanced Master's degree in Electrical Engineering with demonstrated teaching experience at the university level (professor, adjunct, lecturer, or TA). Electrica

Architect (CAD & Construction Documentation). Architect (CAD & Construction Documentation). Architect (CAD & Construction Documentation) experts to contribute their advanced skills to a dynamic customer project.

Join our team as an Azure DevOps Engineer, where you will play a pivotal role in building, maintaining, and optimizing cutting-edge cloud infrastructure. This is an opportunity to leverage your expertise in Azure, DevOps, Kubernetes, and Docker to drive innovative solutions and ensure seamless deplo

Mechanical Engineering Professor. Role Title: Mechanical Engineering Professor. Mechanical Engineering Professors, adjuncts, and academic instructors to participate in a high-impact AI research project for a customer.

Job Description Maigrate is an AI consulting and transformation firm that partners with mid-market companies to identify, build, and implement AI solutions that drive real business outcomes. We don’t just hand over a strategy deck and walk away - we get deep into our clients’ operations, learn their bottlenecks, and build what actually moves the needle. We are early-stage, growing fast, and assembling the team that will set the standard for how companies adopt AI. Junior engineers who join now won’t just execute tasks - they’ll learn by doing, work directly alongside senior engineers and AI strategists, and grow fast in an environment that rewards curiosity and initiative. If you’re hungry to build real things and go deep on AI, we want to hear from you. "This is an in-person role based out of our Lawrence, NY office." What you’ll do Build and ship features across the stack, from UI to backend, on real products used by real clients Work alongside senior engineers on AI-powered systems and integrations Learn how to make smart tradeoffs and take ownership of your work end-to-end Grow quickly by tackling a wide range of problems across the stack in a startup environment Collaborate with strategists and work directly with mid-market clients to understand their needs and deliver real impact What we’re looking for 1–2 years of professional or internship experience in tech or a related field - recent grads welcome Genuine excitement about AI - you use it, you think about it, and you want to build with it A growth mindset - you ask questions, learn fast, and aren’t afraid to be a beginner Startup energy - flexible, resourceful, and comfortable figuring things out as you go Authorized to work in the US; able to work EST hours Preferred Experience at a startup or fast-moving team You've taken a project from idea to working product, whether through code, AI tools, or a combination, and you can show it Experience working directly with clients to develop custom tools or internal applications Compensation Range: $85K - $110K

$50 - $120/hourpayGodotGame Developmentmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Godot Game Engine Expert Job Type: Contract Location: Remote Job Summary Join our customer's team as a Godot Game Engine expert, where you will have the opportunity to work on cutting-edge interactive experiences in a dynamic and collaborative environment. You will leverage your deep knowledge of Godot to drive the technical direction of game projects, ensuring robust architecture and seamless gameplay. This position is ideal for professionals passionate about creating high-quality games and excelling in both communication and technical domains. Key Responsibilities • Design, implement, and optimize gameplay systems and features using the Godot Game Engine., • Collaborate closely with designers, artists, and other developers to deliver polished and engaging player experiences., • Architect and maintain clean, scalable, and well-documented codebases., • Troubleshoot and resolve complex technical issues throughout the development lifecycle., • Contribute to the evaluation and selection of technical solutions and tools related to the Godot ecosystem., • Mentor and support team members in best practices, Godot workflows, and robust coding standards., • Participate actively in sprint planning, code reviews, and quality assurance processes. Required Skills and Qualifications • Deep expertise with the Godot Game Engine (GDScript, C#, or VisualScript)., • Proven track record of shipping commercial or high-quality independent titles using Godot., • Strong understanding of 2D/3D game development pipelines, asset integration, and performance optimization., • Ability to communicate complex technical concepts clearly in both written and verbal form., • Experience collaborating in a remote, distributed team environment., • Solid problem-solving abilities and passion for learning new technologies., • Demonstrated ability to produce clean, maintainable, and efficient code. Preferred Qualifications • Experience contributing to open-source Godot projects or plugins., • Background in gameplay, UI/UX, or multiplayer networking systems., • Exposure to agile development methodologies and tools.

PhD Engineer (Electrical, Mechanical, Chemical). PhD Engineer (Electrical, Mechanical, Chemical). PhD-level Engineers in Electrical, Mechanical, or Chemical disciplines to contribute to a high-impact customer project.

mechanical engineeringtechnical document analysisproblem-solvingwritten and verbal communicationdata analysisattention to detailself-managementinterdisciplinary collaborationtechnical content creationdata quality assurancemicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Mechanical Engineer Job Type: Contractor Location: Remote Rate: 20$-50$ per task Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Key Responsibilities: • Analyze technical documents and extract key information relevant to your domain expertise, • Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios, • Collaborate with multidisciplinary teams to ensure accuracy and depth of data and analysis, • Provide detailed written and verbal feedback on document clarity, technical accuracy, and effectiveness, • Apply advanced subject matter knowledge to evaluate and solve complex engineering problems, • Work independently, managing your time to deliver high-quality outputs with minimal supervision, • Contribute to the continuous improvement of data quality and project processes Required Skills and Qualifications: • 2-6 years of professional or academic experience in mechanical engineering or a closely related field (lab, workplace, or academia), • Strong reading comprehension skills, with proven ability to analyze and interpret technical documents, • Exceptional English communication skills, both written and verbal, • Demonstrated experience in creating or evaluating technical content, such as reports, studies, or problem sets, • Ability to work independently and efficiently, with excellent self-management, • High attention to detail and commitment to data accuracy, • Experience interfacing with technical documentation and performing analytical tasks Preferred Qualifications: • Advanced degree (Master’s or PhD) in Mechanical Engineering, Chemistry, Physics, or Biology, • Previous experience contributing to interdisciplinary or research-driven projects, • Familiarity with data-driven analysis or training data preparation

Bachelors degree in Mechanical Engineering Aerospace Engineering Physics or related Engineering discipline. Experience in Responsible Engineering Systems Engineering Office of the Chief Engineer or Reliability Engineering roles on complex aerospace systems.

Bachelors degree in Electrical Engineering Aerospace Engineering Physics or related Engineering discipline. Experience in Responsible Engineering Systems Engineering Office of the Chief Engineer or Reliability Engineering roles on complex aerospace systems.