Offres Engineering à Medford, New YorkCréer des alertes d'emploi

Job DescriptionSalary: $150K-$200K DOE Position: Sr. Electrical Design Engineer /Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilledElectrical Design Engineerwith a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards, • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control, • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products Qualifications: • Bachelors degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance About Phihong Phihong is a global leader in the development of world-class power solutions, with annual revenue of $400+ Million. A leading supplier of power adapters, power supplies, Power-over-Ethernet products, and electric vehicle chargers, Phihong proudly serves OEMs in the medical, datacom, telecom, personal electronics, industrial, and networking markets, and has a truly global reach with design labs, manufacturing facilities, and sales support centers in California, New York, The Netherlands, China, Japan, and Taiwan. Phihong is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. This is a fully onsite position located in Bohemia, NY

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The salary range for this position is $80,000 to $110,000 annually and will depend upon experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Manufacturing Engineer is responsible for creating efficient manufacturing processes for new and existing products. Communication between Design Engineer and Manufacturing is critical. Manufacturing Engineer wwill evaluate and make improvements to exisiting and new methods and materials to maximize process efficiency and quality. Key Position Accountabilities: • Design and Development: Plan, conceptualize, and develop manufacturing processes for both new and sustaining products., • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Testing and Validation: Review and verify test setups and support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform detailed engineering calculations to support manufacturing decisions, to predict and optimize manufacturing performance with respect to productivity., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact, • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD, MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness. Required Knowledge, Skills and Abilities: • Hands on Process development: Soldering and general manufacturing assembly best practices., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to evaluate return on investment of implementation of new processes., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative solutions to complex manufacturing challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Attention to Detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards. Qualifications: • Bachelor of Science in Manufacturing, Mechanical, or Industrial Engineering., • 3+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Must have good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures, • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Job Summary East/West is seeking a highly motivated, dedicated Quality Engineer Associate with an eagerness to learn. The Quality Engineer Associate will provide quality assurance support to ensure that products meet quality requirements. The position requires technical engineering knowledge developing and reviewing quality standards, methods, work instructions and procedures for the inspection of manufactured and procured products. This role works within a team of other Quality Control professionals striving to achieve zero-defects without compromising throughout. Work assignments are given by the Quality Manager. Essential Functions • Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations., • Develops inspection methods (Inspection Checklist and Acceptance Test Procedures) to ensure product quality., • Balloons engineering drawings., • Create AS9100 First Article Inspection Report templates., • Reviews engineering models/drawings and production routing instructions to ensure conformity and accuracy in the production process., • Works together with Design Engineering, Production, and other departments to improve product quality and manufacturability., • Drive product nonconformance issues to closure via a zero-defect mindset and attitude., • Support the nonconforming material process by reviewing and analyzing defect data to identify trends and offer improvement strategies., • Willingness to learn automated inspection methods (Vision, CMM)., • Ensures products adhere to company and industry quality standards., • Assists in evaluating defects generated in house and from customer returns; assists in generating rework methodology., • Assist other Quality Engineers with Corrective Action initiatives for the prevention of future defects. Qualifications/Minimum requirements • U.S. Citizenship required., • Associate or bachelor's degree in an Engineering field (Manufacturing Technology) preferred., • Zero (0) to One (1) year of experience in a manufacturing environment. Experience in quality inspection preferred., • Ability to create and analyze models and drawings using Solidworks., • Capable of reading and interpreting complex drawings and blueprints., • Basic knowledge of GD&T (Geometric Dimensioning & Tolerance)., • Basic knowledge of standard inspection tools (calipers, micrometers, height gages, etc.)., • Ability to learn production sequences and the company's quality standards., • Strong analytical and problem-solving skills., • Knowledge of Microsoft Office applications., • Excellent verbal and written communication skills - English language required., • Ability to work efficiently independently or in a team environment., • Able to stand, walk, bend, and lift 50 lbs., • Ability to pass yearly vision tests for color and acuity, if required. East/West offers a generous benefits package, including but not limited to: • Medical, Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance, • 9/80 work schedule (Every other Friday off) Job Title: Quality Engineer FLSA Classification: Non-Exempt Job Type: Full time EOE / Disability / Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job DescriptionEngineering Technician We are seeking an experienced Engineering Technician to support testing, troubleshooting, and validation of electronic systems and circuit boards in a highly collaborative engineering and manufacturing environment. This is a growth-driven opportunity that offers exposure to new product development, advanced testing equipment, and hands-on problem-solving while working alongside engineering teams. This role is ideal for technicians with strong electronics troubleshooting experience, board-level diagnostics skills, and the ability to work independently in a fast-paced manufacturing environment. Location: Yaphank, NY Pay: $30-$38/hour Key Responsibilities • Perform in-process testing of circuit boards and electronic assemblies., • Troubleshoot electrical and electronic systems down to the component level., • Write and execute test procedures for circuit boards and systems., • Support Engineering with new product and system development initiatives., • Load and configure software for system testing., • Read and interpret schematics, wiring diagrams, and wire lists., • Utilize oscilloscopes, DVMs, and other test equipment to diagnose and resolve issues., • Perform high-voltage testing while adhering to established safety procedures., • Document and report recurring faults, failures, and test results., • Coordinate with Quality Assurance regarding defective components and assemblies., • Assist with test fixture development and improvement efforts., • Travel to customer sites as needed for inspections, installations, troubleshooting, and repairs., • Maintain accurate testing records and documentation. Required Qualifications • 3+ years of experience in electrical or electronic testing., • High School Diploma or equivalent., • Strong troubleshooting skills at the board and component level., • Experience with:, • High-voltage testing, • PCB and electronic system troubleshooting, • Oscilloscopes and DVMs, • Electronic test equipment, • Ability to read and interpret:, • Electrical schematics, • Wiring diagrams, • Wire lists, • Working knowledge of digital electronics., • Strong computer and documentation skills., • Ability to obtain a U.S. Government Security Clearance (U.S. Citizenship required)., • Willingness to travel as needed. Preferred Qualifications • Associate's or Bachelor's degree in Electronics, Electrical Engineering Technology, or related field., • Active U.S. Government Security Clearance., • Experience with power supplies or power conversion systems., • Test fixture design experience., • Manufacturing or engineering test environment experience. What We're Looking For • Hands-on electronics troubleshooting expertise., • Strong analytical and problem-solving abilities., • Self-motivated professional with excellent communication skills., • Ability to work effectively with Engineering, Quality, and Manufacturing teams., • Detail-oriented technician who takes ownership of their work and contributes to continuous improvement efforts. Work Environment This position is based in a large engineering and manufacturing facility currently undergoing significant upgrades to enhance efficiency and capability. Employees have access to modern testing equipment, advanced manufacturing technology, and a collaborative team environment focused on innovation, quality, and continuous improvement. Job Type & Location This is a Contract to Hire position based out of Yaphank, NY. Pay and Benefits The pay range for this position is $30.00 - $38.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Yaphank,NY. Application Deadline This position is anticipated to close on Jul 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 3- 7 minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team.

Job Description Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Safety Sensitive Position Essential Skills: • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Legally authorized to work in the US and able to successfully pass a personal background check and drug screening Non-Essential Skills: • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Basic understanding of an MRP or ERP system Physical & Mental Demands: • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be requiredOn a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Quality SUPERVISOR: Quality Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Quality Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our internal Quality Management System by developing and optimizing our internal and external quality processes, procedures, and documentation. This position's primary focus is to assist, contribute, and execute on the team's strategic plans for Quality Management System stability and improvement. Power Connector's Quality Engineer is a dynamic, adaptable, open-minded problem solver with analytical and communication skills suited for individual and team contribution. This position is an integral part in sustaining and improving our quality system for expansion within our current industry and penetration into new industries. This position enjoys the inherent challenges of improving and stabilizing quality management systems and manufacturing processes in a diverse, dynamic, and growing organization. This position has a strong influence on the fundamental principles of the deployed quality management system and leads many initiatives related to the enhancement of internal and external manufacturing and quality processes. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 5-7 years of experience in quality, manufacturing, or related field Knowledge: • Strong knowledge of ISO standards (AS9100 preferred), • Proficient in using inspection equipment, such as calipers and micrometers, • Ability to read drawings, specifications, acceptance test procedures, etc., • Proficient in MS Office Skills: • Good oral and written communication and presentation skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Interface with quality personnel at customer and supplier levels, • Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required, • Inspect, test, or measure materials, products, installations, or work for conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers, when applicable, • Perform visual inspections of finished products and grade, classify, or sort products according to sizes, weights, colors, or other specifications when applicable, • Support First Article Inspection (FAI) activities in accordance with AS9102 requirements., • Conduct routine and non-routine analyses of in-process materials, raw materials, conditioning samples, finished goods, or stability samples, • Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded, • Discard or reject products, materials, or equipment not meeting specifications, • Mark items with details such as grade or acceptance-rejection status, • Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release, • Maintain all Quality Control documentation, • Assist in all Quality Control activities as directed, • Notify supervisors or other personnel of production problems, • Complete documentation needed to support testing procedures, including data record forms, equipment logbooks, or inventory forms, • Calibrate, validate, or maintain quality control equipment, • Develop and conduct computational analysis for internal and external validation testing as necessary, • Initiate and maintain communication with suppliers for ongoing issues. Create and submit Supplier Corrective Action Requests (SCARs) as needed and assess SCAR response., • Assess discrepant material, create Discrepant Material Request, and notify Material Review Board for disposition, • Identify root causes and applicable corrective actions related to quality issues, • Execute quality control protocols and provide feedback to management for potential improvements, • Develop documentation needed to support testing procedures, including data record forms, equipment logbooks, or inventory forms for New Product Introduction, • Conduct & record internal trainings to ensure compliance to quality procedures, • Provide support to other engineering areas of operation, • Any additional tasks necessary to execute on the team's strategy for operational sustainability, improvement, and optimization Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job DescriptionBenefits: • Free food & snacks, • Health insurance, • Vision insurance, • 401(k) matching, • Competitive salary, • Dental insurance Manufacturing Engineer Overview VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. VJ X-Ray is seeking a detail‑driven, process‑oriented Manufacturing Engineer to make an impact with our engineering change processes, product documentation, and manufacturing support activities. This role sits at the intersection of engineering, operations, and product lifecycle management, ensuring that product data is accurate, controlled, and communicated clearly and concisely across the organization. This position is ideal for someone who excels at documentation, cross‑functional coordination, and keeping complex product information organized and flowing smoothly. Essential Skills/Job Duties: • A bachelor’s degree in mechanical engineering (or closely related field), • A minimum of one (1) years’ experience in an advanced technology manufacturing environment supporting Production and Engineering initiatives., • Engineering Change Notice (ECN) processes, including creation, review, and approval. Ensure changes are implemented accurately and on schedule across multiple sites, • Create, structure, and maintain Bills of Materials throughout the product lifecycle, • Must be able to read and assess 2D & 3D CAD design specifications (SolidWorks preferred) and the ability to read and interpret detailed mechanical drawings, • Validate accuracy and alignment with design specifications and customers’ needs, • Maintain part numbers, revision histories, and source information within the ERP system, • Develop, update, and maintain clear, visual, and accurate manufacturing work instructions, standard operating procedures (SOPs), and assembly guidelines in accordance with company standards, • Create and maintain process documentation, routing and work orders, • Collaborate with engineering, supply chain, quality, and production teams to resolve documentation issues and support smooth production operations, • SAFETY: VJ X-Ray is a large, robust, complex manufacturing environment, and safety for our employees is paramount, so we all strive to be proactive and current with our safety procedures and protocols., • Identify opportunities to streamline documentation, change processes, and product data workflows, • Ensuring data accuracy and data analysis within our ERP system (Global Shop Solutions-GSS) Non-Essential Skills, • Experience with manufacturing processes, • Proficient CAD experience designing models and components in SolidWorks (SolidWorks certification a plus), • Knowledge of Lean Manufacturing / Six Sigma., • Conversant in Chinese (Mandarin)Physical Demands and Mental Demands:, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe mannerOn a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Use judgement and sound reasoning to make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description Mechanical Test Engineer - Level III • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Mechanical Test Engineer-Level III to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturing, automotive, and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: DTB is looking for a dedicated and detail-oriented Mechanical Test Engineer with over 5 years of experience in engineering, manufacturing, or construction projects. This candidate has proven expertise in mechanical or fluid systems, project management, and troubleshooting complex challenges. DTB is looking for a strong communicator with a track record of building lasting customer relationships and driving efficiency in fast-paced environments. • Budget and Risk Management, • Mechanical or Fluid systems Expertise, • Multi-task and manage numerous projects at the same time, • Strong critical thinking skills to efficiently plan and direct large-scale projects, as well as mitigate risks, • Troubleshooting problems creatively and thinking outside the box, • Excellent verbal communication skills required for customer correspondence and working with peers, • Build and maintain long lasting relationships with customers, • Promote continuous improvement and be process driven The ideal candidate will need to be successful in this position: Required Qualifications: • 4 yr. bachelor's degree in either Mechanical, Fluids, Process, Manufacturing, or Systems Engineering REQUIRED, • 5+ years- experience in an engineering position in a similar field REQUIRED, • Ability to obtain Secret clearance, • US Citizenship is required Preferred Qualifications: • Project management experience on large-scale programs preferred, • Experience in Mechanical/Fluid/Systems testing a plus, • Engineering design (Inventor, AutoCAD, etc.) experience a plus, • MS Project experience a plus, • Ability to work overtime to meet deadlines, including nights and weekends, as necessary, • Motivated to learn new challenges, • Strong attention to detail, • Clear verbal and written communication skills As a Dayton T. Brown employee, you can expect a fun working environment that provides security and career advancement, and so much more such as: • Tuition reimbursement, • A stable, successful organization, • Innovative work environment, • Advancement potential, • Private medical, vision, and dental insurance, • Profit sharing, 401K with company match!, • Work/Life balance and family values. Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job DescriptionKey Responsibilities • Provide technical leadership throughout the entire product lifecycle, from requirements definition and system architecture through qualification, production, and long-term sustainment., • Lead the design, analysis, simulation, verification, and integration of innovative analog and digital hardware solutions for mission-critical, harsh-environment applications., • Develop and maintain comprehensive technical documentation, including requirements, design specifications, test plans, and verification reports., • Present technical concepts, designs, and results at internal and customer design reviews., • Evaluate and optimize complex engineering tradeoffs involving performance, reliability, manufacturability, cost, schedule, and risk., • Collaborate closely with manufacturing teams, suppliers, and customers to resolve technical issues and support product improvements., • Provide hands-on troubleshooting, root-cause analysis, and corrective action support for both new and legacy products., • Mentor and develop engineering talent, contribute to technical proposals and cost estimates, and participate in technical recruiting and hiring activities.Qualifications, • Bachelor's degree in Electrical Engineering required; Master's degree preferred., • 15+ years of experience in analog and digital circuit design, including A/D conversion, processors/microcontrollers, digital I/O, and communication interfaces., • Strong expertise in power electronics and power conversion technologies, including MOSFET, IGBT, SiC, and GaN devices., • Extensive experience designing DC/DC converters and working with military and aerospace standards, including MIL-STD-1275, MIL-STD-704, DO-160, and MIL-STD-461., • Deep knowledge of electrical and environmental analysis methods, including thermal analysis, electrical stress analysis, worst-case analysis, tolerance analysis, aging analysis, FMEA, EMI/EMC, and radiation effects (SEU and TID)., • Proven experience with printed wiring board (PWB) layout for high-power, high-voltage, and EMI-compliant applications., • Strong understanding of communication protocols including CAN, RS-232/422/485, SPI, JTAG, PCI/PCIe, and 1G/10G Ethernet., • Experience with motor control systems, control theory, Z-domain analysis, Clarke and Park transforms, and sensor interfaces such as LVDTs, resolvers, and encoders., • Proficiency with industry-standard CAD and simulation tools, including LTspice, PSpice, OrCAD, Allegro, MATLAB, and Simulink., • Excellent analytical, communication, and problem-solving skills, with the ability to lead multidisciplinary technical efforts.

Job Description Actalent is currently hiring for a design civil engineer for a top firm in Long Island Please schedule an immediate time to speak: https://talentassistant.actalentservices.com/assistant/bookings/rUU4t4Lx Description • Lead and support land development, residential, and site civil design projects from concept through construction., • Prepare design plans including site layout, grading, drainage, utilities, stormwater systems, and erosion & sediment control., • Perform stormwater management analysis and design, including hydrologic/hydraulic modeling in compliance with NYSDEC and NYCDEP standards., • Develop erosion and sedimentation control plans, prepare permit packages, and coordinate with regulatory agencies., • Produce detailed engineering drawings and construction documents using AutoCAD and Civil 3D., • Conduct site visits, field assessments, and collaborate with contractors, architects, and project stakeholders., • Assist in preparing engineering reports, technical analyses, specifications, and cost estimates., • Ensure design compliance with NY State and NYC regulations, codes, and permitting requirements. Schedule: 8:30am-5:30pm Monday- Friday Qualifications: Bachelor of Civil Engineering 2+ Years Experience AutoCAD, MicrosoftOffice EIT Please Apply Now and schedule an immediate time to speak: https://talentassistant.actalentservices.com/assistant/bookings/rUU4t4Lx Job Type & Location This is a Permanent position based out of Holtsville, NY. Pay and Benefits The pay range for this position is $53.00 - $68.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Holtsville,NY. Application Deadline This position is anticipated to close on Aug 3, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Business Development & Sales Manager Engineering Solutions Open to working Remote At Dayton T. Brown, we believe you shouldn't have to choose between cutting-edge innovation and a supportive, people-first culture. Here, you'll work alongside experts at the top of their field who collaborate as a team and create an environment that's both professional and genuinely welcoming. That's the culture we're proud of. We're an innovative, world-class company trusted by military, commercial, aviation, and aerospace customers-and we're continuing to grow. DTB's 32-acre engineering and technical campus is home to an accredited testing laboratory with diverse testing capabilities, such as Environmental, Dynamic, Electrical, Structural, etc., as well as manufacturing and research facilities. These resources are well-staffed by subject matter experts, engineers, technicians, and seasoned project managers to blend the talent best suited to answer client requirements. You'll find it easy to work with a company whose reputation is stellar and respected. We are looking for a Sales Manager with proven experience and a passion for selling engineering solutions, to join our team and help spearhead our growth. You will play a critical and active role in day-to-day sales and operations. You must have an entrepreneurial spirit and comfortable working in a structured sales process environment. Successful candidates will have a can do, what it takes attitude. This is an excellent opportunity to be one of the key members – possibly executive level - of our Sales team and position yourself for unique career growth opportunities. What You'll Need for Success in Business Development & Sales, Engineering and Test Services: • Work closely with our technical teams to develop new go-to-market sales strategies for existing and new customers., • Plan, prepare and execute strategic deals in complex sales cycles., • Work closely and collaboratively to develop and implement appropriate prospecting strategies and plans., • Provide complete and appropriate solutions to boost revenue growth and profitability., • Present, promote, and sell services using solid arguments to existing and prospective customers., • Establish, develop, and maintain positive business and customer relationships., • Working with our Marketing Manager, you'll develop marketing strategies for continued growth Here's what we are looking for: • Target driven and experience in networking with and influencing decision makers., • An impressive network of potential new clients, • Excellent communication and presentation skills, • Ability to work closely with engineering and support teams to win programs, • Experience working within testing, aerospace, high end manufacturing, or comparable environment., • Solid understanding of relevant technology in commercial and DoD arenas, • Ability to creatively explain and present complex concepts, • Solid technical background, • Self-motivated with a results-driven approach., • Ability to work independently as well as within a team., • BSME or BSEE – preferred., • US Citizenship required Our people work together – Engineering and Business Development in a culture that promotes teamwork. To continue being a national leader in innovative Engineering and Test solutions, we want to ensure that every Dayton T. Brown, Inc. team member gets the best growth and professional development Find your future with a financially stable company that has great benefits, great people, and recognizes people for their great work. We are a company that provides a sense of family and teamwork (or traditions) but large enough to promote growth and opportunity. Join our amazing Engineering and Test Division of dedicated professionals here at Dayton T. Brown, Inc.! In addition to competitive salary, you will also be eligible for comprehensive benefits featuring: • Private medical, vision and dental insurance, • 401K with Company Match!, • Tuition reimbursement, • An atmosphere conducive to professional growth and family values., • You'll enjoy our onsite softball field, tennis court, holiday parties, picnics, sports and much more!, • If you are looking to find a better way to use your business development and engineering knowledge with a company that's second to none, we'd love to meet you! Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The salary range for this role is $70,000 to $90,000 based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary The Quality Assurance Engineer supports product quality and compliance across Manufacturing, Engineering, Product Development, Procurement, and Product Assurance. This role assists with quality planning, audits, root cause analysis, and corrective actions to ensure timely delivery of reliable, cost-effective products. The QA Engineer also works closely with cross-functional teams, suppliers, and customers while gaining exposure to product qualification, testing, and inspections. Key Position Accountabilities: • Provide day-to-day QA support for production, engineering, and procurement activities., • Assist in developing and maintaining quality planning procedures to meet company and regulatory standards., • Support investigations of non-conformances, including root cause analysis and implementation of corrective and preventive actions., • Participate in internal audits and contribute to continuous improvement initiatives., • Review engineering change notices, manufacturing processes, and SOPs for compliance., • Support product qualification testing and inspections under guidance of senior QA staff., • Collaborate with suppliers and customers to resolve quality issues and ensure performance requirements are met. Qualifications: • A Bachelor Degree in Engineering, Mathematics, or Applied Sciences is preferred, • Six Sigma Certification (e.g. CSSGB, or comparable) is preferred, • = 3 years of related experience (Manufacturing, Industrial, etc.) is preferred, • Knowledge of AS9100, MIL-PRF-38534, MIL-STD-883, and IPC-A-610 is preferred, • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms, • Demonstrated ability to develop excellent working relationships with management, customers, and vendors, • Excellent time management skills Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net Physical Demands: • The physical demands described here are representative of those that must be met with or without a reasonable accommodation by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to move product and equipment and to occasionally lift office products and supplies, up to 20 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description Senior Quality Assurance Engineer Location: Bohemia, NY (100% onsite) Compensation: $100K-$140K base (depending on experience) Overview A well-established, highly reputable manufacturer supporting aerospace, defense, and space programs is seeking a Senior Quality Assurance Engineer to join its team. This individual will play a key role in driving product quality, resolving complex issues, and influencing overall quality strategy. The role offers strong visibility across engineering, manufacturing, and leadership, along with mentorship responsibilities. Key Responsibilities • Provide daily QA engineering support across manufacturing, engineering, procurement, and product development, • Lead resolution of production and quality issues to ensure on-time delivery and product integrity, • Develop and maintain quality planning procedures and ensure compliance with internal and regulatory standards, • Drive root cause analysis, corrective/preventive actions, and verification of effectiveness, • Conduct internal audits of processes and quality systems, • Review drawings, quality plans (PAP/PPAP), engineering changes, and SOPs for compliance, • Partner cross-functionally with customers, suppliers, and internal teams on quality performance and requirements, • Support inspections (incoming, source, and customer audits) and qualification testing efforts, • Provide mentorship, training, and guidance to junior QA team members, • Contribute to proposals with technical input and cost estimates Qualifications, • Bachelors degree in Engineering, Industrial Engineering, or related field preferred, • 7+ years of Quality Assurance Engineering experience, • Strong knowledge of industry standards (AS9100, MIL-PRF, MIL-STD, IPC, etc.), • Experience with root cause analysis, failure investigations, and corrective actions, • Ability to communicate technical information effectively across teams, • Strong project management and organizational skills, • Six Sigma knowledge is a plus Additional Details, • Work performed in a controlled cleanroom environment (ESD protocols required), • Light travel (<10>, • Ability to lift up to 20 lbs as needed, • Must be eligible to work in the U.S. and meet requirements for export-controlled environments Why This Role, • High-impact role supporting mission-critical aerospace/defense programs, • Strong cross-functional visibility and influence, • Opportunity to shape quality processes and mentor team members In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $100k-$140k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $100,000.00 to $140,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The compensation for this role is $100,000 to $140,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The QA Engineer, Sr plays a key role in driving product excellence and customer satisfaction by leading quality initiatives and resolving complex challenges. This includes collaboration with cross-functional teams, suppliers, and customers while shaping best practices in compliance, testing, and inspections. The Senior QA Engineer also mentors junior team members and have the opportunity to influence quality strategy across the organization. Key Position Accountabilities: • Provide day-to-day Quality Assurance Engineering support to all areas of the company (Manufacturing, Engineering, Product Development, Procurement, and Product Assurance). This includes the timely resolution of production issues in an effort to support the on-time and cost-efficient shipment of quality products., • Establish and maintain quality planning procedures. Ensure that performance and quality products conform to established company and regulatory standards, are properly documented to assure uniformity, and communicated to appropriate parties., • Resolve quality issues/discrepancies to full resolution. This includes, but not limited to, cross-functional teams and communication with suppliers and customers., • Responsible for understanding customer performance/quality requirements, measuring our performance against these requirements, and communicating to appropriate parties., • Perform internal audits of department processes and procedures., • Analyze and investigate the root cause of non-conforming product deficiencies. This encompasses generating and analyzing of failure analysis reports, review of parts, manufacturing processes, RMAs, materials issues, development of disposition, corrective and preventative actions, and verification of their effectiveness., • Review specification control drawings and generate quality plans (PAP, PPAP)., • Assist Incoming Inspection with material disposition and Material Review Reports., • Review/approve engineering change notices, manufacturing processes, and SOP’s to insure compliance and up-to-date., • Plan, monitor and track product qualification testing per customer specifications or DDC’s internal procedures., • Contribute technical input, as well as material and labor cost estimates in support of tactical business opportunities and proposals., • Perform Source Inspection at vendor sites, and support customer Source Inspection at DDC, as needed., • Travel <10%, • Provide training, mentorship, and coaching to junior members of the Quality Assurance team to ensure their continuous development and alignment with company quality standards, processes, and best practices. Qualifications: • Bachelor’s degree in appropriate Engineering, Industrial Engineering, Mathematics/Statistics, or Applied Sciences is desired. Six Sigma knowledge a plus., • Minimum 7 years related Quality Assurance Engineering experience., • Knowledge of quality, military, and industry standards AS9100, MIL-PRF-38534, MIL-STD-883, and/or IPC-A-610 desired., • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms., • Demonstrated ability to develop excellent working relationships with management, customers, and vendors., • Excellent project and time management skills. Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net Physical Demands: • The physical demands described here are representative of those that must be met with or without a reasonable accommodation by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to move product and equipment and to occasionally lift office products and supplies, up to 20 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Senior Electrical Engineer (Analog/Digital) Location: Suffolk County, NY (On-site) Compensation: $120K-$180K Work Authorization: Must qualify as a U.S. Person (export-controlled environment) A well-established, industry-leading manufacturer supporting mission-critical aerospace, defense, and space programs is seeking a Senior Electrical Engineer (Analog/Digital) to join its engineering team. This role will play a key part in the design, development, and lifecycle support of advanced power distribution, generation, and motor control products. What You'll Do • Lead electrical engineering efforts across the full product lifecycle (requirements; design, validation, production support), • Design and develop analog and digital circuits, including power electronics and control systems, • Perform detailed analyses (thermal, stress, worst-case, FMEA, EMI, tolerance, aging) to ensure performance in harsh environments, • Drive technical direction, coordinate cross-functional engineering teams, and support design reviews and customer proposals, • Support new and legacy products through troubleshooting, testing, and continuous improvement initiatives, • Mentor junior engineers and contribute to hiring and team development What You Bring, • 7+ years of experience in analog/digital circuit design (A/D, microcontrollers, I/O, communications), • Strong background in power electronics (MOSFET, IGBT, SiC, GaN) and high-reliability design environments, • Experience with MIL-STD (1275/704, 461) and/or DO-160 standards, power systems, and DC/DC converters, • Hands-on experience with PCB layout for high-power applications and EMI compliance, • Familiarity with communication protocols such as CAN, RS232/422/485, SPI, JTAG, PCI/PCIe, Ethernet, • Experience with CAD/simulation tools (e.g., SPICE, OrCAD, Allegro, MATLAB/Simulink) Nice to Have, • Background in radiation effects for space applications (SEU, total dose, etc.), • Experience with motor control systems and advanced control theory, • Knowledge of sensors (LVDT, resolvers, encoders) Education, • Bachelors degree in Electrical Engineering required; advanced degree preferred This is a high-impact role supporting critical, cutting-edge applications in a collaborative, engineering-driven environment. Ideal for someone who enjoys technical leadership, complex problem-solving, and working on highly reliable In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $120k-$180k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $120,000.00 to $180,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Groundwater & Environmental Services, Inc. (GES), an industry leader with a reputation for excellence in providing environmental consulting, engineering, compliance, and technical field services to clients in diverse market sectors, seeks a Junior to Mid-level. Engineer. This is a position for a detail-oriented, team player with strong communication, analytical, organizational, problem solving, and time management skills. The position will report to a Principal Engineer, and work under the supervision and mentorship of other engineers, project professionals, and field technicians in a collaborative and safety conscience environment. The selected candidate will be integrated into our Northeast Region engineering team working across multiple states in New York and New England. Candidate will work out of the Islandia, NY. Duties and Responsibilities: • Perform groundwater and vapor treatment system engineering calculations, • Perform remediation system and laboratory data tabulation, evaluation, and report preparation, • Completion of materials/equipment/supplies specification and procurement, • Subcontractor scope of work development, coordination, and contracting, • Assist with cost estimates and support proposal efforts, • Preparation of remedial action plans, pilot test workplans, site conceptual model development, • Preparation of permit applications and compliance reports, • Coordination directly with subcontractors, vendors, and laboratories, • Coordinate field tasks associated with operation and maintenance (O&M) of remediation systems (e.g., data collection, system sampling, system cleaning, carbon replacement, etc.), system installation, excavation projects, and remedial injections, • Perform field work including remedial system O&M, pilot testing, remedial in-situ injections, groundwater sampling, collecting environmental and permit compliance samples, soil excavation, contractor oversight for trenching, piping & system installation, • Perform other related duties as assigned, • Travel within the Northeast region to perform field work as necessary, • Coordinate, participate in, and complete Health and Safety related field observations and documentation Skills & Requirements: • A Bachelor's degree or higher in Engineering (Environmental, Chemical, Civil), • 3-5 years of related environmental consulting experience, • Must be resourceful with excellent communication and writing skills and possess a high degree of initiative and time management skills, • Engineer-in-Training (E.I.T.) certification or Professional Engineer registration is a plus, • Stormwater or civil engineering experience is a plus, • Mechanical aptitude and experience with basic hand tools is a plus, • Field work requires wearing personal protection equipment and working outdoors in all seasons Our comprehensive benefits program includes: Hybrid workforce, medical, dental, vision, prescription, 401k, FSA, STD, LTD, New Parent Leave, 529 CollegeBound Fund, Tuition Assistance, Bonus Plan, and more. Groundwater & Environmental Services, Inc. (GES) believes that diversity and inclusion among our staff is critical to our success, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. At GES, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, gender, pregnancy, national origin, age, disability, marital status, sexual orientation, gender identity or expression, military and veteran status, and any other characteristic protected by law.

Job Description Retlif Testing Laboratories is looking to hire a full-time Environmental Simulation Test Engineer III to join our Ronkonkoma, New York Environmental Simulation Testing Laboratory. Do you have a background in mechanical engineering and want a career, not just a job? This position earns competitive pay, $90,000-$120,000 based on experience. We also offer excellent benefits, including medical, dental, vision, a matching 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program. If this sounds like the right opportunity for you in electrical engineering, consider applying today! ABOUT RETLIF TESTING LABORATORIES An industry leader for 45 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers in such industries as aerospace, rail, maritime, military, defense, and medical. Retlif provides electromagnetic compatibility, radio approval, product safety, and environmental simulation testing to national and international standards. We pride ourselves on providing exceptional customer service. We have a loyal and long-standing customer base that appreciates our commitment to the highest quality in testing and engineering services. Our mission is to fully address the testing and compliance needs of our clients. As a team member at one of the USA's leading independent testing laboratories, you can expect excellent personal growth opportunities, a professional atmosphere, and comprehensive employee benefits. We are an equal opportunity employer that values each member of our team. A DAY IN THE LIFE OF A TEST ENGINEER As an Environmental Simulation Test Engineer III, you play a critical leadership role as a member of our team. You oversee and mentor other technical staff members who are the technical interface with our customers, serving as a technical resource during the performance of contracted testing as well as during our initial sales efforts. You work closely with the customer to develop program specific test procedures. You are involved with the pre-test engineering reviews, test sample preparation, setup, execution of the tests, and the documentation of test results. You regularly interact directly with customers. In order to apply appropriate test standards and provide time and cost/quotations, you provide support to the sales team. You also get to support Engineering in the development of new service offerings. You get great satisfaction from helping our clients succeed by fully addressing their compliance needs! QUALIFICATIONS FOR AN ENVIRONMENTAL SIMULATION TEST ENGINEER III • Bachelor's degree in a relevant field OR equivalent training, • Required: Minimum of 4 years of industry work experience in the mechanical engineering field of Environmental Simulation Testing., • Prior experience with technical preparation of assigned test procedures for both internal and external use., • Prior experience in job costing and generation of quotations., • Familiarity with the following test standards preferred: MIL-STD – 810, RTCA/DO 160, • Desired hands-on working experience in vibration and shock testing as well as knowledge of temperature, humidity, sand, and dust testing., • Excellent computer skills, • Ability to perform multiple tasks and meet strict deadlines in a fast-paced environment., • Ability to work independently., • Ability to lift 50 pounds, bend, lift, and twist., • Position requires obtaining a hearing test., • Ability to use Air Purified Respirators (APS) or Powered Air Purified Respirators (PAR) is a prerequisite for any testing that requires respiratory protection., • Background that would permit the U.S. Dept. of Defense (DoD) to issue a Secret Clearance, which requires U.S. Citizenship Are you organized and attentive to detail? Do you have excellent interpersonal skills? Can you effectively prioritize multiple tasks in order to meet strict deadlines? Do you have strong communication skills, both written and verbal? Can you work well independently? Do you thrive in a fast-paced environment? If so, you might just be perfect for this Test Engineer position! WORK SCHEDULE This full-time Test Engineer job is Monday - Friday, 8:00 AM - 4:30 PM. Additional hours may be necessary at times, depending on customer needs. READY TO JOIN OUR TEAM? We understand your time is valuable, and that is why we have a very quick and easy application process. If you feel that you are right for this Environmental Simulation Test Engineer III job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Job Posted by ApplicantPro

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Follow all VJX and OSHA workplace safety requirements and policies, • Safety Sensitive Position Essential Skills: • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Will need to successfully pass a drug screening and background check Non-Essential Skills: • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Ability to travel domestically and internationally for customer service purposes Physical Demands and Mental Demands: • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required. On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description Director of Sales - Testing & Engineering Services Division Bohemia, NY ON-SITE Are you a solutions-driven sales leader who thrives at the intersection of engineering, technology, and customer problem-solving? Dayton T Brown Inc, a recognized innovator in defense, aerospace, and commercial testing, seeks a Director of Sales to propel our Testing and Engineering Services Division into new frontiers. About the Role This is a pivotal, hands-on leadership role for someone passionate about technical sales and team growth. You will manage and mentor a talented inside sales team at our test facility, collaborate closely with DTB's Corporate Business Development group, and directly drive individual sales results. You'll also play an instrumental role in strategizing and supporting our business expansion into Huntsville, Alabama, and Merritt Island, Florida, leveraging our legacy reputation with new market penetration. Expect to wear two hats: Inspiring coach who develops others, and individual contributor who closes significant business. You'll leverage your engineering acumen and sales instincts to identify and capture opportunities across military, aerospace, and commercial markets. Your understanding of how testing and engineering services shape the product lifecycle-from concept to deployment-will establish you as a trusted strategic partner for customers and prime contractors. What You'll Do • Lead, coach, and motivate the inside sales team to exceed individual and group quotas., • Hunt for new business opportunities, approaching customers across defense, aerospace, and commercial sectors., • Collaborate with Corporate BD and Operations in go-to-market teams to innovate solutions and accelerate market entry-especially at new locations in Huntsville, Alabama and Merritt Island, Florida., • Apply technical expertise and market insight to tailor our portfolio (environmental, dynamic, EMI, materials, reverse engineering, etc.) to evolve customer requirements., • Implement and refine a disciplined, repeatable sales process leveraging CRM for pipeline management and data-driven forecasting., • Build long-lasting relationships with prime contractors, suppliers, government agencies, and commercial customers., • Act as the customer's advocate internally, ensuring our testing impacts product lifecycle ROI, shorter cycles, and improved performance. About You • Minimum of 10 years of experience managing a sales team, with a proven track record of success in technical services sales (preferably in military, aerospace, or systems engineering environments)., • BS in Engineering preferred, MBA or technical master's strongly considered a plus., • Deep understanding of the product lifecycle and how rigorous testing drives market success., • Familiarity with CRM, disciplined sales process, and KPI-based management., • Experience managing a quota-carrying sales team as well as delivering personal quota results., • Strong communicator: both persuasive and technically credible with engineers, procurement, and executive stakeholders., • Natural business builder: entrepreneurial, persistent, and relationally oriented., • Must be able to obtain and maintain security clearance Why DTB? • Competitive compensation package including bonus, • Stable, growth-oriented company with 75+ years of technical innovation., • Professional development, collaborative teams, and industry leadership-not just a job, but a mission., • Direct impact on national defense, aerospace, and next-gen tech sectors. In addition to competitive salary, you will also be eligible for comprehensive benefits featuring: • Competitive salaries, • Tuition Reimbursement up to 100%, • Medical/Dental/Vision/FSA, • 401K with company matching, • Paid time off, • Group Life Insurance, • Employee activities, • A family-friendly work culture, • Cash incentives and rewards Join our amazing Test and Engineering Division of dedicated professionals here at Dayton T. Brown, Inc.! Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job Description Job Title: Architectural Millwork Engineer Location: Long Island, NY Industry: Architectural Woodwork / Millwork (not residential cabinetry or fixtures) Description: We are seeking an experienced Millwork Engineer to join our team in a fast-paced, fully automated architectural millwork environment. The ideal candidate is a highly skilled professional with extensive experience in Microvellum and a deep understanding of custom architectural woodworking fabrication. Precision, efficiency, and familiarity with automated manufacturing processes are essential. Responsibilities: Develop and prepare detailed engineering and shop drawings using Microvellum (AutoCAD-based). Interface directly with CNC fabrication equipment; ensure drawings are optimized for production through Microvellum workflows. Translate architectural and design intent into accurate, buildable millwork components. Collaborate closely with project managers, production teams, and installers to maintain accuracy and production efficiency. Work within a fully automated shop environment supporting high-end, custom architectural projects. Maintain strict quality standards—errors in programming or design have significant production impact. Requirements: Minimum 10 years of experience in architectural millwork engineering or related fields. Expert-level proficiency in Microvellum—must already be fluent; this position is not for candidates transitioning from AutoCAD. Strong understanding of custom woodwork fabrication and construction methods. Ability to manage multiple projects and priorities in a fast-paced production environment. Preference for candidates local to Long Island, NY – relocation is not available. Exceptional attention to detail, problem-solving ability, and technical accuracy. Benefits: Comprehensive medical, dental, and vision coverage 401(k) with 20% employer match Paid vacation, sick, and personal days Merit-based bonuses Transportation reimbursement for NYC-based projects Contact:Phone: 605.210.5066Email: mason@solidrockrecruiting.com Equal Opportunity Employer: We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

AI data lab for training frontier models and evaluating AI agents.Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more.AI systems learn, reason, and perform.Our platform identifies and vets top talent through an AI recruiter

Architect (CAD & Construction Documentation). Architect (CAD & Construction Documentation). Architect (CAD & Construction Documentation) experts to contribute their advanced skills to a dynamic customer project.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $90,000- 120,000, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Magnetics Design Engineer is responsible for the design and development of magnetic components, including transformers, inductors, and related assemblies, for high-reliability aerospace and defense applications. This role supports new business development through direct customer engagement, technical presentations, and specification definition, while also driving cost reduction and process improvements for existing products. Key Position Accountabilities: • Ensure implementation of Company safety, health and environmental programs for employees whose work is directed. Ensure that safe work practices are followed and the environment is fully protected in accordance with Company policy and governmental regulations., • Commitment to the Company’s policies, principles, and procedures and adheres to the Company’s procedures including Environmental, Health and Safety (EH&S), Equal Employment Opportunity (“EEO”), discipline/corrective action, and security., • Designs, tests, and magnetic components.(transformers, inductors, cores, windings.), • Communicates directly with customers to develop product specifications and technical assistance., • Make technical presentations for customers, reps, and sales organization., • Effectively communicates with customers and sales personnel in accurately defining customer requirements., • Supports product manufacturing transition and product maintenance at offshore manufacturing locations., • Uses experience to troubleshoot and resolve process and test issues., • Manages and expedites proto-type builds., • Assists QA Dept. with technical support for internal and external CARs., • Data Analysis., • Ability to analyze, organize and prioritize work while meeting multiple deadlines., • Advanced analytical, evaluative, and objective critical thinking skills., • Proven ability to design magnetic devices., • Knowledge of transformer material suppliers preferred. (cores, bobbins, laminations, cases, wire, etc.) Qualifications: • 2 - 5 years relavent work experience preferred., • Bachelor's Degree Preferred., • Any combination of education, training and experience listed above that demonstrates the ability to perform the duties of the position. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

AI data lab for training frontier models and evaluating AI agents.Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more.AI systems learn, reason, and perform.Our platform identifies and vets top talent through an AI recruiter

Job DescriptionWe are seeking a highly motivated and experienced Support/Field Service Technician to join our expanding team on Long Island. You will troubleshoot client issues from our main office via chat or over the phone utilizing remote tools. When needed, you will travel to site locations for installations, maintenance, and repair of desktops, VoIP phones and networks. *This is not an entry level position. You must have real experience and will be expected to be productive from the beginning. Duties and Responsibilities (not comprehensive of all tasks) · Diagnose and resolve IT related hardware, software, and network issues · Configuration and installation of new IT equipment at client locations · Installation, setup, and support of VoIP systems · Configure user accounts in Active Directory, O365 and other applications · Track customer issues and resolutions in our ticketing system · Proactively monitor, manage, and support client networks · Perform software and hardware updates and maintenance · Investigate security breaches and vulnerabilities · Collaborate with other team members to solve complex issues · Recommend hardware and software improvements to clients · Monitor data backups and perform file restorations or disaster recovery · Rebuild/re-image computers and transferring/saving user profiles and data · Resolve virus and malware issues · VPN setup and troubleshooting · Backup/Restoration and Disaster Recovery Requirements and Qualifications · At least 2 yrs. experience in an IT support related position · ConnectWise and MSP experience +++ · Cisco and Meraki experience +++ · Thorough knowledge of Windows 10 and Mac OS X · Cybersecurity experience or certification a plus, but not required. · Familiarity with mobile devices such as iPhones, iPads, Android, etc. · Prior knowledge of service ticketing systems · Experience installing firewalls, routers, switches, IP cameras, phone systems and wireless access points · Running and terminating low voltage wiring (Cat cable, RJ45, RJ11) · Professional attitude and appearance · Ability to lift/push/pull up to 50lbs and maneuver around close quarters equipment locations · Availability during weekday business hours and a rotating on-call schedule, if needed · Must have a reliable vehicle and be available to travel within an assigned geographical region Desired Qualities and Skills · Strong troubleshooting and critical thinking skills · Ability to multitask, prioritize, and manage time efficiently · Excellent verbal and written communication skills · Self-motivated with the ability to work in a fast-paced environment Why work here We offer a great opportunity to learn and be exposed to many different facets of the IT landscape. Our technicians are not pigeonholed into a narrow field of support. All our technicians are expected to be able to support every service we offer. Training is encouraged as well as use of our in-house lab to further broaden their knowledge.

Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. PhD Engineer (Electrical, Mechanical, Chemical). PhD-level Engineers in Electrical, Mechanical, or Chemical disciplines to contribute to a high-impact customer project.

AI data lab for training frontier models and evaluating AI agents.Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more.AI systems learn, reason, and perform.Our platform identifies and vets top talent through an AI recruiter

$60 - $130/hourpaymechanical engineeringsolid and structural mechanicsdynamics and vibration and controlthermal-fluidstechnical writingassessment designeducational content creationwritten communicationverbal communicationattention to detailtechnical accuracyremote collaborationself-motivationorganizationdigital workflow toolsmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: Mechanical Engineering Professor Role Type: Contractor Location: Remote micro1 is engaging Mechanical Engineering Professors, adjuncts, and academic instructors to participate in a high-impact AI research project for a customer. In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Scope of Work • Design and author rigorous single-option (multiple-choice) assessment questions in your specialization within mechanical engineering, calibrated for graduate or postgraduate complexity., • Translate advanced concepts from Solid & Structural Mechanics, Dynamics & Vibration & Control, or Thermal-Fluids into challenging exam-quality content., • Develop detailed explanations and rationales for answer choices, maintaining the clarity and precision expected in academic settings., • Review and validate the technical accuracy and pedagogical quality of AI-generated mechanical engineering materials., • Collaborate asynchronously with other subject matter experts and project coordinators to refine and improve content quality., • Conduct quality checks, revisions, and enhancements on contributed materials based on feedback and project standards., • Maintain thorough records of assignments and submissions using digital workflow tools provided for the engagement. Preferred Qualifications • PhD or MS in Mechanical Engineering, with current or previous university-level teaching experience (professor, adjunct, lecturer, or TA) in one or more core areas: Solid & Structural Mechanics, Dynamics & Vibration & Control, or Thermal-Fluids., • Experience authoring, grading, or reviewing graduate-level exams, problem sets, or coursework., • Demonstrated ability to convert complex mechanical engineering principles into clear, exam-ready written content., • Background in assessment design, rubric development, or educational content creation., • Exceptional written and verbal communication skills; adept at articulating intricate concepts concisely and accurately., • Meticulous attention to detail and commitment to technical accuracy in all deliverables., • Self-motivated, organized, and comfortable working independently in a remote, asynchronous project environment; familiarity with collaborative digital platforms is a plus. Compensation Structure Compensation is output-based; experts are paid per task that meets the project specifications. The time required to complete work may vary depending on the expert’s experience and workflow. Minimum submission requirements apply. Experts must submit a minimum of tasks per week. Start Timeline & Availability We typically fill roles within 48 hours and are looking for experts ready to jump in right away. If selected, we expect you to start your first tasks within 24–48 hours of completing onboarding.

PhD or advanced Master's degree in Electrical Engineering with demonstrated teaching experience at the university level (professor, adjunct, lecturer, or TA). Electrical Engineering Professor. Role Title: Electrical Engineering Professor.

Job Description We are seeking a skilled Small Engine Mechanic to join our team. The ideal candidate will diagnose, repair, and maintain a variety of small engines used in equipment such as lawn mowers, chainsaws, and generators. Key Responsibilities: • Diagnose mechanical issues using tools and equipment., • Perform repairs and maintenance on small engines., • Replace or repair faulty parts and systems., • Conduct routine inspections and preventative maintenance., • Maintain accurate records of services performed., • Provide excellent customer service and explain repairs to clients., • Stay updated on industry trends and advancements. Qualifications: • High school diploma or equivalent; technical training in small engine repair preferred., • Proven experience as a small engine mechanic., • Strong troubleshooting and problem-solving skills., • Ability to work independently and as part of a team., • Excellent communication skills., • Valid driver's license. Physical Requirements: • Ability to lift heavy equipment and tools., • Comfortable working in various outdoor conditions. Join us to help keep our customers' equipment running smoothly!

Job Description Engineer Precision. Build Excellence. Join Interior Specialties Group as a Cabinet Shop Engineer! Job Title: Cabinet Shop Engineer Company Name: Interior Specialties Group (ISG) Salary: $100,000 – $115,000+ per year (depending on experience) Location: Full-Time | On-Site | Ronkonkoma, NY Industry: Architectural Millwork / Interior Glazing / Commercial & Residential Interiors Job Overview Interior Specialties Group (ISG) is seeking a detail-driven Cabinet Shop Engineer to support our custom millwork and cabinet fabrication operations. This role transforms architectural drawings and field conditions into precise shop drawings, cut lists, CNC files, and material documentation used by our wood shop and installation teams. The Cabinet Shop Engineer plays a critical role in connecting project management, engineering, fabrication, and field installation—ensuring projects are delivered with precision, efficiency, and constructability. Who We Are Interior Specialties Group (ISG) is a premier Architectural Millwork and Interior Glazing company serving developers and residential and commercial builders throughout the New York area. We specialize in precision-driven, high-quality interior buildouts that transform spaces and exceed client expectations. Known for our collaborative team culture and commitment to craftsmanship, ISG provides employees with the opportunity to grow their careers while contributing to complex and rewarding projects across the region. Learn more at www.isg.nyc. Key Responsibilities • Engineering & Drafting, • Produce detailed shop drawings for custom cabinetry, architectural millwork, and specialty fabrications using AutoCAD, Microvellum, or similar platforms., • Translate architectural drawings, specifications, and design intent into manufacturing-ready shop drawings., • Create accurate cut lists, hardware schedules, and bills of materials (BOMs) for fabrication and procurement., • Prepare CNC programs for machining equipment to ensure precise fabrication and efficient material utilization., • Project Coordination, • Collaborate with Project Managers to review scope, timelines, and technical requirements before engineering release., • Coordinate with field supervisors to incorporate site measurements and as-built conditions into engineering drawings., • Communicate with shop personnel and operations leadership to resolve technical questions during fabrication., • Participate in project kickoff meetings to confirm milestones, materials, and installation sequencing., • Quality, Standards & Constructability, • Engineer shop drawings that align with ISG construction methodologies, AWI standards, and project specifications., • Identify constructability challenges early and propose practical solutions for shop and field teams., • Maintain accuracy and consistency across plans, elevations, sections, and detail drawings., • Update and revise drawings based on field conditions, change orders, or client updates., • Technical Support & Process Improvement, • Serve as a technical resource for shop personnel during fabrication., • Maintain and improve engineering templates, hardware libraries, and standard shop details., • Assist with optimizing CNC nests, tool paths, and material usage to improve shop efficiency., • Provide engineering insight into tooling, fabrication workflows, and equipment utilization., • Documentation & File Management, • Maintain organized drawing sets, revision histories, and production documentation., • Ensure engineering packages are complete and accessible to project management and fabrication teams., • Provide fabrication-ready documentation including shop drawings, cut lists, CNC files, and hardware schedules. Qualifications • 5+ years of engineering or drafting experience in cabinetmaking, architectural millwork, or commercial woodworking., • Strong proficiency in AutoCAD; experience with Microvellum, Cabinet Vision, or similar software preferred., • Solid knowledge of woodworking construction methods, tolerances, cabinet fabrication, and AWI standards., • Ability to read and interpret architectural drawings, specifications, and finish schedules., • Experience generating CNC programs for woodworking machinery., • Excellent organizational skills and meticulous attention to detail., • Strong problem-solving abilities with the capacity to manage multiple projects simultaneously., • Clear communication skills to collaborate with project managers, shop leads, installers, and vendors. Preferred Skills • Experience in commercial interiors such as healthcare, corporate, hospitality, or institutional millwork projects., • Knowledge of laminate, veneer, solid surface, metal integration, and specialty finishes., • Familiarity with lean manufacturing concepts or production workflow optimization., • Experience supporting both shop fabrication and field installation teams. Benefits • Competitive salary: $100,000 – $115,000+ annually, • Generous Paid Time Off (PTO), • 401(k) retirement plan, • Opportunity to work with a highly experienced and collaborative millwork team, • Professional growth opportunities within a growing specialty construction company, • Ability to contribute to engineering standards and operational improvements Schedule • Full-Time, • Monday – Friday Work Location • On-Site – Ronkonkoma, NY Equal Employment Opportunity We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.

Why join us? $150-200k Base! Annual Bonuses! 6% 401K Matching! Accelerated Career Growth! Challenging Problems! Job Details We are seeking a highly skilled Electrical Design Engineer with a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and

Required Skills -Education Level: Bachelor's Degree (In lieu of a Bachelor's degree, an additional 4 years of relevant work experience is required in addition to the required work experience.) -Experience: 5-8 years of overall experience as a Data Architect - 5 years in a Healthcare Payor environment. - Required Tech Stack: AWS Aurora OR MongoDB (one or the other), RedShift, DB2 or any relational DB (one or the other), data transformational background, PostGres Nice to have Tech Stack: Mainframe - Able to drive conversations with solution architect teams to ensure data domains requirements are captured and accurately implemented into the platform

Bachelors or Masters degree in Computer Science, Artificial Intelligence, Machine Learning, or a related field. AWS Certified Machine Learning Specialty or AWS Certified Solutions Architect certification. Java, Spring Boot, API Web Services integration = Required. Extensive experience with AWS cloud services, particularly those related to AI and ML like AWS SageMaker, Lambda, and EC2. Proven track record in designing and deploying AI/ML architectures and solutions in a large-scale environment. Strong understanding of machine learning algorithms and AI implementation challenges. Experience with software development life cycle (SDLC) and agile methodologies. Demonstrated expertise in strategic planning and enterprise AI/ML capability development. Strong financial acumen to manage AI/ML investments and ensure cost-effective implementation.

A great opportunity to join a growing Accounting Firm that is offering multiple bonus's per year & flexible schedule! This Jobot Job is hosted by: Lauren Lehman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $130,000 - $175,000 per year A bit about us: Since 1978 our client has been able to provide outstanding services in accounting and finance to their customers. A long standing pillar of South Florida, our client has a reputation of taking care of their customers and their employees. They are currently seeking a Tax Manager to join their growing team! Apply today to learn more! This position is fully onsite - no hybrid or remote schedules will be considered Why join us? • Health & Dental Insurance, • 401(K) Retirement Plan, • Flexible Spending Plan, • Life Insurance, • Paid vacation, personal, and sick time Job Details Responsibilities: 1. Overseeing all aspects of tax management, including tax compliance, reporting, and planning., 2. Developing and implementing strategic tax plans to minimize tax liabilities and optimize financial efficiency., 3. Ensuring accurate and timely filing of all local, state, and federal tax returns., 4. Conducting thorough reviews of tax data, prepare necessary paperwork, and coordinate audits., 5. Keeping abreast of current and emerging tax laws and regulations, ensuring our organization remains in compliance at all times., 6. Providing expert tax advice to senior management and other stakeholders., 7. Collaborating with other departments to identify and address tax-related issues., 8. Managing relationships with external auditors and tax consultants. Qualifications: 1. A Bachelor's degree in Accounting, Finance, or a related field. A Master’s degree or CPA certification is highly desirable., 2. A minimum of 5 years of experience in tax management, preferably within the mortgage industry., 3. Comprehensive knowledge of tax laws and regulations., 4. Proven experience working with high net worth mortgages., 5. Excellent analytical and problem-solving skills., 6. Exceptional leadership and team management abilities., 7. Strong communication and interpersonal skills., 8. Proficiency in tax software and other relevant computer applications., 9. High ethical standards and professionalism, with a commitment to confidentiality. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Our client is seeking a Software Engineer – Solutions Architect with experience in public & private cloud services and technologies, DevOps, CI/CD tooling, PaaS, and GitOps automation. Work cohesively across the company, including heavy collaboration with engineering, product, prod

Minimum Qualifications BS in Environmental Engineering, Mechanical Engineering, or related technical degree with 8+ years Engineering/Program Management experience in Sustainability or Carbon Emissions reduction MS in Environmental Engineering, Mechanical Engineering, or related technical degree wit

Zebra Technologies is seeking an Environmental & Sustainability Engineer to lead internal projects focused on environmental product sustainability, carbon emission reduction, and circular economy practices within Zebra’s engineering organization.

NY Professional Engineer (PE) license or ability to obtain within 12-18 months. Working knowledge of seismic/structural coordination for tanks and process equipment; ability to interface with electrical and controls engineers. Grosser Consulting (PWGC) is a growing environmental and engineering firm

Grosser Consulting (PWGC) is seeking a Wastewater Engineer to manage the planning and design of sewage treatment plants and related systems in New York. The ideal candidate has 10+ years of experience and strong technical skills in hydraulic modeling and engineering design.

Are you a solutions-driven sales leader who thrives at the intersection of engineering, technology, and customer problem-solving? Dayton T Brown Inc, a recognized innovator in defense, aerospace, and commercial testing, seeks a Director of Sales to propel our Testing and Engineering Services Divisio

Supplier Quality EngineerSartorius Stedim North AmericaBohemia, New York, United States(remote)Posted14 hours agoJob FunctionOtherDescriptionSupplier Quality Engineer (Bohemia, NY w/ ability to work remote anywhere on East Coast d/t supplier location): Plan protocols for initial sampling produce

Sartorius Stedim North America in Bohemia, NY (remote on East Coast) is hiring a Supplier Quality Engineer. Master’s degree in relevant engineering field is required; remote work option is available across the East Coast.