Trabajos electrical en Corpus Christi, TexasCrear alertas

Job Description We are seeking a utility Traffic Signal, Roadway Construction skilled laborers and semi skilled laborers to become an integral part of our team! We have several projects in the Corpus area and are need of knowledgeable and experienced persons. Carpenters, utility, plumbers, equipment operators, and electricians. Installation of underground pipe and cable. Training is available for the right persons that does not have prior experience. Experience is compensated at competitive rates. Excellent company benefits, health insurance and 401k Plan. Transportation to job site from Corpus Christi Office Responsibilities: • Assist in installation of roadway electrical and traffic signal systems, • Perform work with minimum supervision, • Dedication to do the work right the first time, • Able to take direction on daily duties, • Able to think on your own when circumstances require, • Equipment Operator- Excavators, Backhoe or Bucket trucks, • Carpentry, plumbing and excavating is helpful but not necessary. Qualifications: • Equipment operators (Excavators, Backhoes, boring Machines Skid Steers) is helpful, • Previous experience in roadway lighting and or traffic signals preferred but not necessary, • Carpentry, plumbing and electrical skills are compensated., • Familiarity with roadway electrical installation or able to learn, • Current I.D. or Current drivers license, class C, B or A, • Experience with driving light to medium sized construction vehicles with trailers is helpful, • Good transportation to job site is available, • Ability to work as a teamCompany DescriptionWe have been in business since October of 1990, and incorporated in April of 1999. Since our inception we have catered to the growing technical needs of our customers. We have been contracting for traffic signal system installations as well as Intelligent Traffic Systems (ITS), roadway lighting and traffic control systems in and around the Texas area since September of 1999. Our staff has over one hundred and sixty years of experience installing traffic signal systems and extensive experience in all the fields mentioned. We have completed numerous projects of all types of work in and around the Houston area ranging in price from thousands of dollars to several million. Projects have been completed as being a general contractor and as well as a sub-contractor to major roadway contractors. We specializes in the installation and maintenance of Intelligent Traffic Management Systems and is one of the top contractors in that area of expertise in the country. Our headquarters are in the heart of the city and can quickly mobilize in order to minimize down time for our customers. Our technicians and electricians are train in all standard areas and specialize with fiber optic systems, ATM, Changeable Message Signs (CMS), Dynamic Message Signs (DMS) ramp meters, CCTV, Video Image Vehicle Detection Systems (VIVDS), inductive loop vehicle detection, vehicle radar detections, traffic signal maintenance, roadway lighting, large roadway signs and various other specialty items.We have been in business since October of 1990, and incorporated in April of 1999. Since our inception we have catered to the growing technical needs of our customers. We have been contracting for traffic signal system installations as well as Intelligent Traffic Systems (ITS), roadway lighting and traffic control systems in and around the Texas area since September of 1999. Our staff has over one hundred and sixty years of experience installing traffic signal systems and extensive experience in all the fields mentioned. We have completed numerous projects of all types of work in and around the Houston area ranging in price from thousands of dollars to several million. Projects have been completed as being a general contractor and as well as a sub-contractor to major roadway contractors.\r\nWe specializes in the installation and maintenance of Intelligent Traffic Management Systems and is one of the top contractors in that area of expertise in the country. Our headquarters are in the heart of the city and can quickly mobilize in order to minimize down time for our customers. Our technicians and electricians are train in all standard areas and specialize with fiber optic systems, ATM, Changeable Message Signs (CMS), Dynamic Message Signs (DMS) ramp meters, CCTV, Video Image Vehicle Detection Systems (VIVDS), inductive loop vehicle detection, vehicle radar detections, traffic signal maintenance, roadway lighting, large roadway signs and various other specialty items.

Job Description Under the direction of the HVAC Supervisor performs supervised repair work. Work requires contact with the public. Performs other duties as assigned. JOB DUTIES AND RESPONSIBILITIES: • Maintains and repairs existing HVAC systems., • Maintains and repairs condensers, evaporator coils, air handlers/gas furnaces, air ducts, refrigerant lines, vent hoods, and bathroom exhaust fans., • Will be responsible for removing old systems and installing new systems., • Will be responsible for running new piping and ducts to existing units., • Will construct interior furnishings such as utility cabinets and storage shelves, and lay out carpentry and masonry materials., • Interprets construction plans, sketches, or other specifications; determine requirements, types, dimensions, and quantities of materials required., • Will fabricate building material to construction plans and specifications., • Will prepare and maintain all proper documentation that is required by local, state, and government regulations to include all EPA requirements., • Will ensure proper horizontal and vertical alignment, grout and shape joints., • Will adjust, troubleshoot, repair, and install all HVAC systems as recommended by manufactures specifications., • Maintain in good working order heating, plumbing, and electrical appliances and fixtures as related to HVAC systems., • Performs other related duties and responsibilities as assigned. JOB REQUIREMENTS: 1. Required Education and Experience: High School Diploma or GED Equivalent. Must have a minimum of twenty-four (24) months previous experience utilizing the methods, materials and equipment used in various phases of HVAC operations to include plumbing, electrical and carpentry. Must be EPA certified., 2. Required - Must hold a valid Texas Driver License and maintain a satisfactory driver’s record. May operate Authority vehicle while on Housing Authority business., 3. Required - Ability to work hours other than 8-5 in variable weather conditions and overtime as required meeting Housing Authority goals and objectives. KNOWLEDGE, SKILLS and ABILITIES: • Good working knowledge of the materials, equipment, and methods used in repair work., • Ability to operate circular saws, reciprocating saw, drill, recovery machine (Freon), vacuum pump, manifold gauges, psychrometer, tubing cutters, and an assortment of other refrigerant hand tools., • Good working knowledge of safety hazards, and precautions pertinent to this position., • Ability to maintain and repair all equipment that is utilized., • Ability to communicate effectively both orally and in writing., • Ability to maintain positive working relationships and demonstrate good judgment and integrity with staff, residents, and the public., • Ability to deal effectively with diverse groups and individuals., • Ability to plan and organize workload., • Ability to exercise good judgment in appraising situations and making decisions., • Ability to wear personal protective equipment and comply with safety requirements., • Maintains confidentiality of necessary information., • Utilizes supplies and equipment properly and without waste., • Works in a safety conscious manner, which insures that safe work practices are used in order not to pose a risk to self and others., • Complies with company policies and procedures and local, state, and government regulations, and maintains a dependable attendance record., • Physical Demands: Ability to lift or move a minimum of 50 pounds. Routinely may be required to exert considerable physical effort in moving and carrying heavy objects in excess of 50 pounds, such as condenser units, air handlers/furnaces and refrigerators. Ability to work, move, walk, stand, and bend for prolonged periods of time (up to 8 hours); with occasional climbing, kneeling, stooping, reaching at, below, and/or above shoulder height, pushing, pulling, and carrying, required. Ability to work under variable weather conditions.

Job Description • We are hiring immediately for full time HVAC TECHNICIAN positions., • Location: Quantum - 5233 IH37 Suite A-6, Corpus Christi, TX 78408. (Openings at other locations within school district available) Note: online applications accepted only., • Schedule: Full time schedule; days and hours may vary. More details upon interview. (Full and Part Time with the flexibility to meet most scheduling needs), • Requirement: Prior HVAC experience and an EPA 608 certification are required., • Pay Range: $25.00 to $52.00 per hour. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Quantum North America is a leading design-build firm specializing in Mechanical, Electrical, Plumbing, Installation, and Energy Engineering solutions. Since 2003, we've delivered reliable, cost-effective services across diverse markets nationwide. Headquartered in Dallas/Fort Worth, our team of 125+ professionals—including engineers, project managers, certified technicians, and skilled tradespeople—drives our consistent growth and reputation for excellence. With over 125 projects completed annually and operations in 30 states, we offer a collaborative, accountable work environment where innovation and client satisfaction are at the core of everything we do. As a member of Compass Group, North America, we want you to be as great as you can be. We empower our associates to direct their own future, keeping them confident that we support them every step of the way. As a result, our associates embody greatness through their actions, natural passion for quality, and a can-do attitude. The opportunity for greatness is real at Quantum North America and throughout the Compass world. Job Summary Summary: The HVAC Maintenance Technician performs a variety of skilled maintenance duties related to the facilities engineering and maintenance functions and is assigned to work for a Supervisor, Foreman, and/or Master Mechanic on a regular basis. Incumbent is guided by a comprehensive and proven skill in one trade as evident by possession of an appropriate license from the state. Within the incumbent’s chosen trade, he/she will work independently to analyze and correct complex problems and ensure that non-license workers perform work in a manner consistent with correct work practices. Essential Duties and Responsibilities: • Updates work statuses and documents tasks completed in the CMMS utilizing a mobile device., • Helps determine manpower, material needs, and deadlines for jobs and projects., • Cleans, lubricates, services, repairs, and diagnoses malfunction of HVAC, electrical and mechanical building systems, sterilizers, food service equipment, sprinkler and standpipe systems, transport systems, electronic signaling systems, fire alarm systems and similar plant and specialty equipment items, • Assists in making decisions on all repairs and reports major problems to the Maintenance Supervisor, Foreman, and Manger as appropriate., • Constructs, finishes, installs, maintains, and repairs electrical and mechanical systems, or the facilities of any related systems, using power & hand tools and other necessary equipment., • Reviews outside vendor projects and makes punch lists., • Analyzes and corrects complex building system problems and electro/mechanical problems related to utilities., • Supports project management activity as needed., • Responds to emergency problems in the facility and makes emergency repairs as needed., • Maintains logs, performs rounds, and completes P.M. work orders, tests, and inspections., • Makes recommendations for modification or improvement of preventive maintenance systems., • Maintains shops and mechanical areas in a clean and safe manner., • Preforms other duties as assigned. Qualifications: • 5 years’ experience as a Maintenance Technician in an institutional setting in an engineering or maintenance discipline., • One of the following: Journeyman Electrical License, Registered ACR Technician with EPA certification in Refrigerant, or Journeyman Plumber License., • Experience working with blueprints and schematics., • Valid driver’s license., • A general understanding of electro-mechanical equipment., • Rudimentary ability to utilize hand-operated construction equipment., • Ability to repeatedly lift 50 pounds and kneel/bend/stoop and perform strenuous labor for extended periods of time. Working Conditions: Some exposure to elevated degrees of high heat, noise, dust, dirt and/or areas requiring infection control. Requires meeting deadlines for completion of work on a daily basis. Must be able to work all hours, including weekends and nights, as necessary, in order to maintain facility at the appropriate and safe level. Enhance your quality of life through our comprehensive benefits: • Medical/Dental/Vision Insurance, • 401K with Company Match, • Disability Insurance, • Life Insurance/AD, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace & Employee shopping program, • Identity Theft Protection, • Pet Insurance, • And More… Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Mayland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2026/03/Quantum-Landing-Page_Feb2026.pdf Applications are accepted on an ongoing basis. Quantum North America maintains a drug-free workplace. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/

Job Description Commercial HVAC Service Technician H and G Systems | Corpus Christi, TX$30–$45/Hour + Take-Home Vehicle | Full-Time, Year-Round Commercial-only work with dispatch straight from home — no residential sales, no chasing your own schedule. Service hospitals, data centers, manufacturing facilities, and more with a trusted North Texas mechanical contractor since 1968. Top Perks • $30–$45/hr based on experience, • Take-home vehicle, dispatched from home, • 90% employer-paid medical insurance, • 401(k) with 6% match, • PTO + 8 paid holidays, • Tuition/book reimbursement for continued training, • Relocation assistance available What You'll Do • Diagnose, repair, and maintain commercial HVAC systems, • Troubleshoot electrical, mechanical, refrigeration, and control issues, • Perform start-ups, commissioning support, and warranty work, • Read schematics/blueprints and complete digital service reports, • Build strong, long-term customer relationships ScheduleMonday–Friday, 7:00 AM–5:30 PM (occasional evenings/weekends/OT) What You Need • 5+ years commercial HVAC experience preferred (residential techs welcome to apply), • Experience with rooftop units, split systems, and package units, • Ability to climb ladders, lift 50 lbs, and operate scissor/aerial lifts, • Valid driver's license, insurable record Dispatch from home, work diverse commercial facilities, skip residential sales — apply today for a confidential conversation.

Job Description Commercial HVAC Installer Location: Corpus Christi, TX Position Summary The Commercial HVAC Installer is responsible for installing, replacing, and commissioning commercial HVAC equipment and systems in accordance with manufacturer specifications, project plans, and company standards. This role will primarily focus on installations while assisting with service calls, equipment start-ups, preventative maintenance, and minor troubleshooting as needed. Responsibilities • Install commercial HVAC equipment including rooftop units (RTUs), split systems, package units, heat pumps, air handlers, condensers, exhaust fans, and ventilation equipment., • Install refrigerant piping, condensate drains, ductwork modifications, controls, and related mechanical components., • Read and interpret blueprints, construction drawings, and equipment submittals., • Perform equipment change-outs and retrofit installations., • Start up newly installed equipment and verify proper operation., • Perform equipment testing and commissioning., • Assist Service Technicians with troubleshooting and repairs during peak service periods., • Complete preventative maintenance and basic service repairs when assigned., • Diagnose common HVAC mechanical and electrical issues., • Maintain accurate job documentation, material usage, and daily reports., • Communicate professionally with customers, project managers, and field supervisors., • Ensure all work complies with OSHA safety standards and company safety policies., • Maintain company tools, vehicles, and equipment in a clean and organized condition., • Participate in after-hours or emergency service rotation as needed., • Perform other duties as assigned. Qualifications • 3+ years of commercial HVAC installation experience preferred., • Experience installing commercial HVAC systems and equipment., • Basic service and troubleshooting experience preferred., • EPA Universal Certification preferred (or ability to obtain)., • Ability to read wiring diagrams, blueprints, and mechanical drawings., • Working knowledge of refrigeration cycle and HVAC controls., • Experience with sheet metal fabrication and duct modifications is a plus., • Strong mechanical aptitude and problem-solving skills., • Valid driver's license with a clean driving record., • Ability to work independently and as part of a team. Physical Requirements • Lift and carry up to 50 pounds., • Work safely on ladders, rooftops, lifts, and scaffolding., • Ability to work outdoors in South Texas weather conditions., • Frequent bending, kneeling, climbing, and standing for extended periods., • Comfortable working in mechanical rooms, rooftops, and construction environments. Preferred Experience • Commercial rooftop units (RTUs), • VRF/VRV systems, • Split systems, • Chilled water equipment, • Heat pumps, • Variable Frequency Drives (VFDs), • HVAC controls and thermostats, • Refrigeration piping, • Equipment start-ups and commissioning Why Join ProTech Mechanical? • Competitive Pay, • Medical, Dental & Vision Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Company Vehicle (when applicable), • Ongoing Training and Career Development, • Uniforms and Safety Equipment Provided, • Stable, Year-Round Commercial Work, • Opportunities for Advancement Check out this link to learn more about Protech Mechanical! Build the future with Protech! A Crete United company Equal Opportunity Employer Pro Tech Mechanical and Crete United are committed to inclusive hiring and encourage applications from all backgrounds—including race, gender identity, sexual orientation, disability, and veteran status.

Job DescriptionDescription: Lead Maintenance Technician Job Type: Full-Time | Onsite Pay: Competitive hourly rate + commission Take the Lead in Keeping Communities Running At CAF Management, Lead Maintenance Technicians are trusted to keep our apartment communities safe, functional, and in top condition. You’ll take the lead on repairs, preventative maintenance, and service requests—while guiding and mentoring the maintenance team. This is the ideal role for a skilled technician ready to take ownership of a property and grow into a leadership role. We promote from within, and many of our Maintenance Supervisors and Regional Service Managers began in this position. What You’ll Do • Lead and perform daily maintenance operations including service requests, unit turns, and inspections, • Troubleshoot and repair HVAC, plumbing, electrical, and appliance issues, • Ensure the property meets safety, cleanliness, and curb appeal standards, • Order and manage parts and supply inventory within budget, • Train and support Assistant Maintenance Technicians, • Coordinate vendor work and supervise contracted repairs, • Participate in the on-call rotation and handle emergency maintenance situations, • Communicate with the Property Manager to align maintenance efforts with community goals What You’ll Need to Succeed Required: • 2+ years of hands-on maintenance experience in multifamily or related field, • Strong knowledge of HVAC, electrical, plumbing, appliance repair, and carpentry, • Ability to lead a team and work independently, • Availability to work Saturdays (closed Sundays) and participate in on-call rotation, • Valid driver’s license and reliable transportation Preferred: • EPA or HVAC certification, • Experience using Entrata or similar property management software, • Bilingual abilities What You’ll Get CAF offers one of the most competitive benefits packages in the industry—because we believe when we take care of you, you can take care of everything else. • Commission opportunities based on performance, • 15 Paid Holidays (including CAF Impact Day), • PTO based on tenure:, • 0–4 years: 15 days, • 5–9 years: 20 days, • 10–14 years: 25 days, • 15+ years: 30 days, • 3 Flex Days per year, • Medical, Dental & Vision (employee medical starts at $65/month), • 401(k) + Roth IRA with company contributions (after 6 months), • Paid Parental Leave (10 days), • 30–50% Employee Housing Discount (after 30 days, if applicable), • Recognition programs and a people-first culture Physical Requirements This role involves regular physical activity throughout the apartment community. Team members must be able to safely perform the following tasks: • On your feet: 33% to 100% of the time, • Physical activities (50% to 100%):, • Bend/stoop/squat/kneel (e.g., repairs, inspections, and installations), • Climb stairs and ladders (e.g., access rooftops, attics, or elevated areas), • Push/pull, stand, and walk (e.g., transport tools, materials, and equipment), • Reach above shoulders (e.g., HVAC units, light fixtures, shelving), • Grasp/grip/turn and use finger dexterity (e.g., using hand tools, locks, and fasteners), • Lifting/Carrying:, • Over 50 lbs: Rare need (less than 1%), • 10–25 lbs: Occasional need (1% to 33%), • Under 10 lbs: Frequent need (33% to 100%) Grow With a Company That Invests in You We believe in growing our people from within. CAF provides the tools, support, and opportunity to grow. Ready to lead with CAF? Apply now. Requirements:

Job DescriptionDescription: ECI Group is seeking an experienced, customer-centric Service Manager to join our growing team. The Service Manager is a critical member of our onsite community team, leading a team of maintenance professionals that work to ensure our properties meet our standards of operational excellence and uphold our company values. Our Service Managers thrive in being leaders who stive to deliver excellence across all aspects of the business including customer service, people leadership, safety, and operations. Sound like you? Join us! About Us ECI Group has been building communities and enriching lives for over 50 years by developing, building, investing in, and operating multifamily housing throughout the Southeast. While ECI is proud of its history, we are even more excited about our future. We are privately owned and fully integrated – developing, constructing, and managing our properties. ECI Group owns and operates approximately 7,000 + units, with more communities in active development. At ECI, we are guided by our core values, the heart of which is working as One Team, Better Together. What’s In It For You? In addition to competitive pay, ECI’s robust benefits package includes: • Bonus potential, • 30% rental discount at ECI properties, • Paid time off and company holidays, • 401k plus 4% company match, • Wellness plans, flexible spending accounts, and dependent care, • Participation in professional development programming, including a designated Mentor from day one What You’ll Do • Daily monitoring and communication of the maintenance staff, schedules, on-call availability, and duties., • Coordinate with the office staff to determine weekly apartment make ready and service request schedules., • Complete and evaluate the daily/weekly completion of all work orders., • Identify and schedule preventative maintenance including filter change, power washing, etc., • Monitor and inspect market ready apartments to ensure quick turn times., • Monitor and maintain all required permits for operating the property such as pool, spa, elevator, sign etc., • Assist with hazardous weather problems, fires, floods, freezing, snow removal, etc.; identify and correct any hazardous community conditions., • Assist the Community Manager with supervising all work by outside contractors., • Ensure all equipment is operated in a safe manner., • Coordinate, schedule and respond to resident/management service requests for occupied apartments., • Assist Community Manager with ensuring safety procedures are adhered to at the property., • Coordinate and schedule appropriate safety and skills training for the maintenance staff., • Report any workman’s compensation issues and/or employee incidents immediately., • Maintain compliance with OHSA regulations., • Monitor and maintain the maintenance budget, order supplies, and obtain purchase approvals. Requirements: What You’ll Need • Proficiency speaking Spanish, • Minimum 3 years of general maintenance experience in residential property management; 1 year of supervisory experience is preferred., • Working knowledge of HVAC, plumbing, electrical, fire protection and energy management systems, • EPA certification as well as other certifications/licenses as required by local, state or other regulations., • Willingness and ability to work weekends and maintain 24/7 on-call duties., • High school graduate or GED., • Basic experience with Microsoft Office Suite, Internet, and other relevant applications. What’ll Set You Apart • Proficiency with Excel and ability to accurately perform basic mathematical functions., • Strong customer service and problem-solving skills., • Prior experience or working knowledge of Yardi or similar applications. Physical Activities and Work Environment • Requires frequent lifting and moving of objects up to 75 pounds., • Requires frequent bending and/or stooping, and use of ladders or stepladders, to perform essential maintenance tasks., • May require regularly climbing stairs to access upper floor apartments., • Requires frequently working outside in various weather conditions. ECI Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community "We care for our communities", • Integrity "We act with integrity", • Passion "We infuse passion into everything we do", • Quality "We believe quality comes from a culture of innovation and continuous improvement", • Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a Construction Materials Technician I, II, or III to join our Consultants team in either Corpus Christi,TX. The Construction Materials Technician is responsible for conducting field or laboratory testing, sampling, and/or inspection services. Responsibilities include: • Communicate with dispatcher/coordinator to ensure priorities and deadlines are met in both the field and laboratory., • Meet with supervisors of contractors, engineer/architect representatives and/or other project leads on project sites to discuss and coordinate testing, sampling or inspection of construction materials or construction procedures., • Following safety protocols, ensure safe utilization, storage and maintenance of all nuclear gauges and field equipment., • Communicate project progress and delays to supervisor and dispatcher., • Submit accurate and complete testing/inspection reports on a daily basis., • Drive company vehicles to job sites in a safe manner., • Perform other duties as assigned. Qualifications • Shall possess a valid driver’s license within the applicable jurisdiction and meet firm’s auto insurability requirements. Construction Materials Technician in Training: • High School Diploma or GED required., • No experience necessary Construction Materials Technician I: • At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Construction Materials Technician II: • At least 1 year of applicable experience in the materials testing and inspection industry and possess at least 2 or more industry certifications Construction Materials Technician III: • At least 3 years of applicable experience in the materials testing and inspection industry and possess 3 or more industry certifications Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is occasionally required to sit, frequently required to stoop, kneel crouch or crawl, regularly required to stand, walk, climb, balance, and talk. Continuously required to use hands and reach. Occasionally required to lift and/or move up to 70 pounds with or without assistance. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision, depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require the employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines and equipment and hand tools such as sledgehammers, shovels and picks. Work assignments are frequently performed outside in all weather conditions. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job Description Job Title: Physical Therapist Location: Corpus Christi, TX Acute Care Hospital Setting (U.S.-Based Opportunities Available) Overview: We are seeking a licensed Physical Therapist to evaluate, plan, and implement individualized treatment programs for patients recovering from injury, illness, or surgery. This role focuses on restoring function, improving mobility, reducing pain, and preventing disability while helping patients achieve their highest level of independence and performance. Key Responsibilities: • Interpret and carry out physician-prescribed therapy plans in accordance with applicable practice act guidelines, • Develop and implement individualized treatment programs using therapeutic exercise, manual therapy, and modalities such as heat, water, and electrical stimulation, • Utilize mechanical and therapeutic equipment, as well as prosthetic and orthotic devices, as appropriate, • Evaluate patient progress, document outcomes, and adjust treatment plans as needed, • Supervise and provide direction to physical therapist assistants, support staff, students, and volunteers, • Contribute input to performance evaluations of assistants and support staff, • Maintain patient confidentiality and ensure patient safety at all times, • Collaborate with interdisciplinary care teams to optimize patient outcomes, • Perform additional duties as assigned Qualifications: • Graduate of an accredited Physical Therapy program, • Strong knowledge of professional standards, ethics, and best practices in physical therapy, • Excellent communication and interpersonal skills, • Ability to work both independently and as part of a collaborative team Experience: • New graduates are encouraged to apply; prior clinical experience preferred Licensure & Certifications: • Current state licensure as a Physical Therapist (or eligibility to obtain licensure), • Current CPR certification (e.g., American Heart Association or equivalent) Work Schedule: • Full-time, • Typically 5 days per week, 8-hour shifts (may vary based on facility needs) Work Environment: • Hospital or acute care setting with access to advanced medical equipment and interdisciplinary support, • Opportunities to work with diverse patient populations, including those requiring post-surgical, cardiac, neurological, or rehabilitative care Equal Opportunity Statement: We are an equal opportunity employer and value diversity. All employment decisions are made based on qualifications, merit, and business needs.

Job Description TSR is seeking an Electrical & Instrumentation Designer to work with one of the largest EPC firms in the country. This is a contract position located in Corpus Christi, TX. Under general supervision, the Electrical & Instrumentation Designer will apply advanced engineering techniques, make decisions on engineering problems and methods, represent the organization to resolve important questions, or to negotiate with key engineers and officials of other organizations. He/She will provide technical guidance to designers and less experienced engineers and is consulted extensively by associates and others with a high degree of reliance placed on scientific interpretations and advice. This position is assigned to a client site team in Corpus Christi, TX. No relocation or per diem will be offered. RESPONSIBILITES • Responsible for E/I design for plant capital and cost projects. Work from P&ID's, client specifications and vendor data to design complex piping systems for a chemical facility, • Aid in developing E/I discipline design schedules and updating regularly, • Work to meet any and all deadlines as required by project schedules, • Perform fieldwork, pulling measurements, locating tie-ins, as-building existing systems, etc. develop detailed scopes, • Create new and/or revise existing 2D MicroStation drawings (schematics, single lines, DCS I/O drawings, MCC’s, arrangements, P&IDs, tray routing, etc.) as well as cable and conductor sizing and approximate lengths., • Assemble design packages (for E&I portion) including scope of work, transmittal, drawings, vendor information, and quotes., • Lead E/I discipline design reviews for construction, maintenance, and operations personnel, • Ensure completed design is functional, maintainable and designed with safety and that all applicable codes have been followed and maintained, • Interface with other disciplines, • Work with Construction as needed during the installation of the project., • Review project design estimates and work scopes for new projects REQUIREMENTS • Minimum of 8 years of applicable industry E/I design experience, • Proficient in MicroStation and Microsoft Office (Outlook, Word, Excel, etc.) preferred, • Great communication skills and ability to lead project reviews., • Ability to work within a multidisciplinary team, • Experience in developing scopes of work, task analysis, material list, loop sheets, single lines, logics, schematics, arrangements, etc. preferred PHYSICAL REQUIREMENTS • Work is located at a chemical plant and requires exposure to ambient temperature extremes, • Work may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat, and steel-toed boots, • Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs. frequently, etc., • Ability to climb ladders and stairsCompany DescriptionTechnical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.Technical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.

Job Description:\n\n Engineer Positions Available:Chief Engineer (CHE) Minimum endorsement as a national chief engineer (limited) of motor-propelled vessels of less than 1600 gross registered tons (GRT) upon near coastal without a horsepower limitation Pay Rates: 12-hour day: $365.65 24-hour day: $731.30Chief Engineer (DDA) Minimum endorsement as a national designated duty engineer of motor propelled vessels of less than 500 gross registered tons (GRT) upon near coastal without a horsepower limitation Pay Rates: 12-hour day: $324.25 24-hour day: $648.90Assistant Engineer (DDL) / Engineer Trainee Minimum endorsement as a national assistant engineer 6000 HP or national designated duty engineer of motor propelled vessels of less than 4000 HP pf less 500 gross registered tons (GRT) or a third assistant engineer of motor propelled vessels Pay Rates: 12-hour day: $293.55 24-hour day: $587.10Relief Engineers Pay Rates 12-hour day: $242.05-301.28 24-hour day: $484.10-602.56 Schedule:Seven days on the vessel and seven days off the vesselJOB SUMMARY The engineer is directly responsible to the master for the proper operation and maintenance of all mechanical equipment on the vessel. The chief engineer is directly responsible to the master for the proper operation and maintenance of all mechanical equipment on the vessel. The primary responsibility of the chief engineer is to safely operate and efficiently maintain vessel machinery. PHYSICAL DEMANDSAn engineer must be capable of reading well enough to comprehend the various manufacturers’ instruction manuals that describe preventative and corrective maintenance procedures for the equipment aboard the vessel. An Engineer must also be capable of reading and understanding written directives that may affect their job or emergency assignmentAn Engineer must possess enough physical dexterity to manipulate small items in restricted spaces or large objects when using mechanical lifting devicesAn engineer’s hearing must be adequate to ensure safety while working in a machinery space with a high level of background noise and to detect changes in the operating sounds of machinery. An Engineer must be capable of communicating with the master or other personnel via portable or fixed VHF-FM radio, as well as by intercom systems or voice communicationEngineers are frequently required to move equipment that is heavy or awkward. It will frequently be necessary to move equipment that is heavy, large, and awkward from one level to another. Mechanical lifting devices are provided and must be used as necessary; assistance must be obtained from other members of the crew when appropriateEngineers must ascend and descend stairs and ladders, sometimes while transporting tools or objects. They must use portable ladders or stools to allow them to work on systems that are in the overhead section of machinery spacesRepairs may require that engineers reach into small, poorly accessible areas of machinery; work on equipment that has pressurized or hot components; secure or segregate systems to provide an adequate safety margin; troubleshoot equipment that is difficult to reach; work in areas that have high noise levels; work below decks in an area that may experience periods of darkness in unusual situations, and work in confined and restricted spacesThe Engineer must be capable of performing assigned emergency duties without undue danger to oneself or the vesselThe Engineer must have color vision that allows him/her to safely work on electrical systems that have color-coded wires; distinguish between warning, alarm, and normal operating lights; discern system components that are identifiable by color code; and observe basic safety precautions that may be related to color identification DUTIESAll gear is to be stowed securely in its proper location when not in useAll main engine cylinder blow-down valves shall be kept in good working order so that all cylinders can be blown down prior to each start of the main enginesBecome familiar with and adhere to company policies and proceduresBecome proficient in and assist in line-handling operationsDaily vessels Engine Logs, Fuel and/or DEF receipts, and fuel or lube requisitions need to be emailed daily to engine.logs@gandhtowing.com as soon as possible after midnight. The engineer on the watch will note all tests in the engineer’s diary. The engineer’s diary shall be maintained per the standard established guidelinesDuring the monthly fire drill, all emergency equipment will be inspected and or tested, and all deficiencies and the completion of these inspections and or any abnormal conditions found will be logged in the engineer’s diary, along with the corrective action. On vessel crew change days, this inspection will be coordinated with the master per TSMS Section 3.11, 33 C.F.R 164.80 tests and inspectionsFor vessels not implemented in MobileOps: The engine department maintenance checklist must be completed by the chief engineer and be submitted to the engineering department no later than the 20th of the month. The checklist is to be completed quarterly and is due in the months of March, June, September, and December If the machinery alarm system is inoperable, the engineer will take hourly readings of all systems and record them in the engine logIf the vessel is operating seaward of the jetties, the above section also applies. This includes transits to Freeport, Corpus Christi, and LNG offshore transits If the vessel is underway for a full 24-hour period, multiple sheets will have to be completed with temperature, pressure, rack or fuel position (this pertains to mechanical and electronic engines), exhaust temperature (if equipped), and RPM readings for the main engines and generator engines recorded hourlyIn the event the engineer on watch feels the vessel touch bottom or strike an object, the facts and circumstances surrounding this occurrence will be entered in the engineer’s diary, and the OICNW will be promptly notifiedMain engines shall be blown down prior to each start of the main enginesMake every effort to ensure that the total hour figure is correct, as routine maintenance plans are based on this figureOn vessels equipped with emergency bilge suctions, the valves are to be operated weekly, the valve stem oiled, and the packing checked. The access floor plate is to be painted in a contrasting color or labeled. On vessels not equipped with an air box drain piping system for the main and or auxiliary engines, the drains are to be kept clear with buckets in place; do not allow drainage to run into the bilgeOversee the transfer of necessary fluids, including, but not limited to, fuel, lube oil, DEF, hydraulic oil, ballast water, and potable waterPerform routine and emergency repairs to the vessel’s main and auxiliary systemsPerform scheduled maintenance plansSafely and efficiently operate the vessel's machinery shall be corrected. If monitored by a remote alarm panel, the engineer on watch may monitor the alarms from a location within hearing distance of the panel. If the remote alarm panel is in any way inoperative, the engineer on the watch is to be in an appropriate working area within sight or sound of the engine room at all times when the vessel is underway in the harborShould it become necessary for the vessel to be towed by another vessel, the engineer on the watch is to contact the engineering department for instructionsThe chief engineer is accountable for all engine room tools and equipment. The chief engineer is required to comply with this Towing Safety Management System (TSMS) and with all applicable regulationsThe chief engineer is responsible for adhering to the provisions of the certificate of inspection (COI), if applicable. The chief engineer is responsible for conducting all oil and fuel transfers per TSMS Section 5.1 Oil Transfer Procedures for that particular vessel. The chief engineer is responsible for ensuring all firefighting equipment is in good working condition and shall continually maintain the fire pump and ensure it is always ready for immediate useThe chief engineer is responsible for maintaining all equipment and, if necessary, for repairing any machinery and equipment on board the vessel, within their capacity. If additional assistance is required, the engineer will notify the company watchstander per TSMS section 4.5 maintenance and repair reportingThe chief engineer is responsible for maintaining engine room cleanliness by practicing good housekeeping. This includes keeping the engine room neat, clean, and free from slipping or tripping hazards, including keeping decks free from oil and fuelThe chief engineer is responsible for reporting unsafe conditions to the master and for taking early and positive action to prevent accidentsThe chief engineer is responsible for stopping work whenever they feel that the evolution is dangerous and that hazards can be mitigated cannot be mitigated, then they are responsible for implementing stop-work responsibility as outlined in TSMS Section 6.8 Stop Work Responsibility (SWR)The chief engineer is responsible for the safety of the crew and for preventing environmental pollution incidents by maintaining and safely operating all vessel machineryThe chief engineer may be called out on the deck by the officer in charge of the navigation watch (OICNW), to assist as directed when necessary for the safety of operations or to meet other requirements of the TSMS. The chief engineer may be required to stand a lookout in addition to the OICNW, per 46 C.F.R. 140.630. The chief engineer must routinely order machinery parts and engine room supplies from the engineering department. Orders for emergency or time-critical items shall be made following the procedures outlined in TSMS Section 4.6 Identification of stores and Supplies. The engine department daily report must be filled out fully and accurately, including at least one full set of temperature, pressure, rack, or fuel position (this pertains to mechanical and electronic engines), exhaust temperature (if equipped), and RPM readings for main engines and generator engines in a 24-hour period during which the vessel is operating in harbor service. Accurate report documentation taken by the engineer on watch provides information that is very important to the operation of the vessel and the engineering department’s preventive maintenance programThe engineer must check the supply pressure of any fixed fire-extinguishing systems if equippedThe engineer must complete and forward to the engineering department at the office work orders for all work that is beyond the capability of the engine room personnel; the engineer must keep the master informed of any repairs that may hinder the safe operation of the vesselThe engineer must complete the engine department's daily report each day. Page one of the daily report contains fuel and lube data, along with machinery hours and filter information. The fuel and lube used should be the exact amount, to ensure records are as accurate as possible. All tanks have a calibration chart, and this can be used to keep up with your fuel burn. If any filter or oil changes are performed, the date should be changed to reflect the date the activity was performed. Pages two through four of the report contain temperature and pressure reading information collected on the given dayThe engineer must make daily inspections of the steering gear and clutch controls, logging statistics, at the beginning of each watchThe engineer on duty must complete the engine department’s daily report and ensure that the report is maintained accurately and completely. (Note: This report is electronic unless the electronic version is deemed inaccessible due to special circumstances.) The following standards for maintaining the report must be followed: The engine department's daily report must be kept daily, and entries shall be made as soon as possibleIf a manual report is prepared, due to special circumstances that may render the electronic log inaccessible, then the entries shall be written accurately and legibly in blue or black ink No erasures shall be made to the manual reportAny incorrect data or statements must be corrected by drawing a single line through the entry and initialing itThe engineer on watch shall ensure that the OICNW is made aware of all known aspects of the condition of the vessel and shall be notified immediately of any unsafe condition. The engineer on the watch will ensure that their department wears proper shoes and clothing, per this TSMS, and will always require the use of proper safety equipmentThe lockout / tag-out procedures per TSMS Appendix A Section A.15 Electrical / Lockout / tag-out procedure must be adhered to when conducting inspections, bypassing safety guards, or servicing systemsWhen filling fuel oil day tanks or adding lube oil to the main engine or sump tank, the engineer is not to perform any other duties until either the fuel pump is stopped or the lube valves are closed REQUIRED LICENSURE & CERTIFICATIONS A U.S. Coast Guard Merchant Mariner Credential (MMC) endorsed as a National Assistant Engineer Limited 6000 HP or greater, or a National Designated Duty Engineer Any HP 500 GRT or greaterA valid medical certificate.A Transportation Worker Identification CardMinimum endorsement as a National Chief Engineer (Limited) of Motor Propelled Vessels of less than 1600 Gross Register Tons (GRT) upon Near Coastal without a horsepower limitation This job description is intended to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. Management reserves the right to modify, assign, or remove duties as business needs dictate. The Company is an Equal Opportunity Employer and is committed to maintaining a workplace free from discrimination and harassment. Employment decisions are based on business needs, job requirements, and individual qualifications. All qualified applicants and employees will receive consideration without regard to any characteristic protected by applicable federal, state, or local law. Qualified individuals must be able to perform the essential functions of the position, with or without reasonable accommodation. The Company provides reasonable accommodations to qualified individuals with disabilities and for sincerely held religious beliefs and practices, unless doing so would impose an undue hardship. Individuals needing an accommodation during the application process or employment should contact Human Resources.

Job DescriptionLogicool Air Solutions is seeking an experienced Lead Installer to run residential and light commercial HVAC installations. This is a high-responsibility role for professionals who can execute clean installs, lead crews, and deliver jobs that meet Logicool’s quality standards—every time. This is not an entry-level role. This position is built for installers who can handle pressure, move fast, and take ownership of the entire installation process. Compensation (Performance-Based):This role is designed for proven installation leaders. • $80,000 – $100,000 expected annual earnings., • Compensation based on experience, efficiency, and quality., • Required tools provided for the right individual. What You’ll Receive: • Extensive hands-on training and ongoing development., • Company vehicle (role and responsibility dependent)., • Company phone., • Company uniforms., • Health insurance., • Paid vacation., • Paid holidays., • Required tools provided for the right individual. Who We’re Looking For:You are a strong candidate if you: • Have proven HVAC installation experience., • Can lead an installation crew efficiently., • Can manage time, materials, and workflow under pressure., • Are physically capable of demanding labor., • Can work in high heat and confined spaces for extended periods., • Hold high standards for quality, cleanliness, and safety., • Can follow processes and policies without shortcuts. What Makes This a Lead Installer Role:As a Lead Installer, you are responsible for: • The full execution of each installation., • Job quality, efficiency, and cleanliness., • Crew leadership and task delegation., • Ensuring installations meet Logicool standards and code requirements., • Representing the company professionally on every job. You are trusted to run jobs with minimal oversight. Key Responsibilities: • Lead residential and light commercial HVAC system installations., • Set equipment, run refrigerant lines, duct connections, and electrical components., • Manage crew workflow and job pacing., • Ensure materials and equipment are used correctly., • Maintain clean, safe, and professional job sites., • Communicate job progress and issues to management., • Follow all installation, safety, and quality standards., • Complete installations efficiently without sacrificing quality. Schedule: • Full-time., • Primarily weekday installations., • Overtime and some weekends as required. Requirements: • Proven HVAC installation experience., • Strong leadership and communication skills., • Ability to lift heavy equipment and perform physical labor daily., • Ability to work in extreme heat and physically demanding environments., • Valid driver’s license., • Clean background., • Drug-free., • Professional appearance and mindset. Why Logicool Air Solutions:Logicool Air Solutions is a highly rated HVAC company built on craftsmanship, discipline, and accountability. We support installers with systems, training, and tools—but we expect execution. If you take pride in your installs and want to be part of a company that does things the right way, this is your seat. Location:Based in Corpus Christi, Texas, serving surrounding areas. This Role Is NOT For: • Entry-level installers., • Individuals who rush jobs and cut corners., • People who need constant supervision., • Anyone unwilling to lead by example. This Role IS For: • Installation professionals., • Crew leaders., • Craftsmen., • Individuals who want strong income through performance.

Job DescriptionJob Description:The Sr. Electrical Engineer is responsible for applying standard theories, techniques, concepts, and practices within the electrical discipline. This position specifies, orders, and oversees the installation of maintenance projects. Additionally, this position assists, champions, and supports major capital projects. The Electrical Engineer is responsible for troubleshooting complex electrical problems involving refinery maintenance and reliability. The Electrical Engineer defines program and documentation standards to ensure refinery reliability and equipment availability. Job Duties/Responsibilities:•Design moderately complex electrical systems for capital projects for all electrical distribution equipment and substation specifications.•Support Instrumentation/Electrical Maintenance Technicians with complex field problems during project execution. Assist in technical training and craftsmen technical skills development for new technologies installed by project group.•Develop, review, and modify refinery electrical standards with vendors recommendations and NFPA codes.•Develop Turnaround work and ensure all scope is captured in conceptual phase of project.•For new installations for electrical projects and provide calculations/settings when necessary for (i.e. UPS systems, motors, transformers, relays, related substation equipment, etc).•Act as electrical subject matter expert for the project group for all capital projects that have an electrical scope, including projects with upgrading compressor controls related to motor and 480V motor-operated valves.•Review and approve electrical system studies for refinery up to 138 kV during all projects when appropriate. Make recommendations for improvements of system studies relating to electrical coordination and arc flash study and ensure SKM Model updated by project group.•Update refinery documentation as needed for electrical modifications such as electrical one-lines, motor schematics, relaying and related substation equipment.•Review IFA Packages and direct EPCs on designs to follow Client Standards.•Assist the maintenance department with technical expertise during unplanned events. Minimum Qualifications:•Education: Bachelor of Science in Electrical Engineering•Experience: Min of 10+ years of related experience•Licensure: P.E. Preferred•Technical Skills: SAP, word processing, spreadsheet, database, presentation, familiarity with the internet. Ability to manage assigned projects under limited supervision. Preferred: Working with High Voltage Equipment and substations up to 138kv•Management: Experience mentoring and leading teams required•Other Skills: Strong organizational, written, and verbal communication skills Professional Development Opportunities:•Leadership and management of electrical engineers and designers executing multiple projects •Leadership and management of field evaluations, RCFA, modeling & calculations•Development of training and mentoring platforms for internal team growth•Development of subject matter expertise in multiple areas•Advance skills in project management & multi-disciplinary technical issues Individual field assignments typically each have their own unique requirements. Prior to deployment on any field assignment, you must be able to meet all client-specific site requirements. Should you be unable or unwilling to meet assignment-specific requirements, your continued employment would then be subject to the availability of other assignments whose requirements can be met. These unique requirements may include: -You must possess physical mobility (on the ground and at heights).•You may be required to pick up, lift, carry, and move up to 50 lbs.•You may be required to work at heights, climb ladders and stairways, and may occasionally work off platforms/scaffolding/ladders using the appropriate and required fall protection. •You must be able to work in all weather conditions (including heat, rain, cold, and wind) while wearing the appropriate PPE. This may include but not be limited to a hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves, and leather, steel-toed work boots. •You may be required to position yourself to work in confined spaces•You may be required to adhere to a client’s random drug testing program prior to entering their site.•You may be required to meet a client’s facial hair safety policy prior to entering their site. Brindley Engineering is an Equal Opportunity Employer and committed to hiring and retaining a diverse workforce. Employment decisions are made without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected characteristic as outlined by federal, state, or local laws.BE participates in E-Verify. For additional information regarding E-Verify, please go to www.e-verify.gov.

Job Description Duties & Responsibilities: • Design Electrical systems for large municipal buildings, water and wastewater facilities, petroleum refineries, and manufacturing plants., • Perform electrical load calculations using load calculation software (Excel, SKM, ETAP, Easy Power)., • Perform system modeling and calculation., • Modify and/or design sequences of operations for relaying, PLC Controls, building automation., • Understand major electrical components and their operations (motors, transformers, switchgear, VFDs)., • Meet with vendors to determine specification requirements for projects., • Perform field verification and take-offs of existing systems for renovation projects., • Understand the design sequence (SD, DD, and CD)., • Develop technical specifications., • Coordinate with Bath's mechanical engineers internally and communicate well with outside architects, engineers and contractors., • Respond to RFI's, • Review contractor submittals., • Conduct and/or attend site meetings., • Perform site observation tours and prepare reports. Required Qualifications: • Bachelor's degree in electrical engineering from an accredited university., • Registered as a Professional Engineer in at least one state. Prefer candidate who has a NCEES record because that speeds comity or reciprocity in other states. • At least 10 years' engineering experience (preferably working for consulting engineering firm)., • At least 5 years' experience managing engineering teams and/or departments., • Knowledge of engineering standards (NEC, NESC, NEMA, IEEE and ANSI)., • Computer literate (preferably comfortable using engineering software such as SKM or ETAP)., • Prefer experience in substation design and coordination; high voltage; protective relay application; three-phase power systems and substation components; and lighting, load flow, voltage drop and short circuit calculation., • Prepare electrical systems specifications, technical drawings or topographical maps., • Design circuits, electrical schematics, and parts lists., • Write reports and compile data regarding existing and potential electrical engineering projects., • Provide product field training or testing services for company clients., • Strong organizational skills with the ability to manage multiple projects concurrently., • Experience leading and collaborating with other engineers., • Experience forming project teams, making task assignments, and supervising team members., • Excellent written and verbal communication skills., • Strong focus on client satisfaction. Location: • This is an in-office position (not a remote work position)., • Relocation package may be available to cover moving expenses, temporary housing, and assistance with house hunting.

Job Description Position Overview We are looking an Electrical Designer Jr with +15 years of experience to support industrial power distribution, utility infrastructure, and electrical engineering projects. This individual will work closely with engineers and multidisciplinary project teams to develop electrical engineering drawings and construction documents for industrial facilities, substations, water/wastewater facilities, utility systems, and commercial projects. This role is ideal for a detail-oriented designer who enjoys practical engineering work, field coordination, and supporting projects from conceptual design through construction support and as-built documentation. Projects may include: • Industrial power distribution systems, • Utility infrastructure, • Water and wastewater treatment facilities, • Oil & gas and process facilities, • Commercial and municipal facilities, • Central utility plants, • Substation upgrades and coordination, • Brownfield retrofit and expansion projects Duties & Responsibilities • Develop electrical engineering drawings and construction documents using AutoCAD, AutoCAD Electrical, Revit, BIM, and related drafting software., • Prepare electrical design drawings including:, • One-line diagrams, • Electrical plans, • Conduit layouts, • Cable schedules, • Grounding plans, • Lighting and power plans, • Equipment layouts, • MCC and switchgear layouts, • Panel schedules, • Wiring and interconnect diagrams, • Electrical details and installation drawings, • Translate hand sketches, field notes, redlines, vendor drawings, and engineering markups into accurate construction drawings., • Read, evaluate, and interpret engineering drawings, plans, specifications, and vendor documentation., • Support brownfield retrofit and renovation projects through field verification and as-built drawing updates., • Conduct field investigations, site visits, and existing condition surveys as required., • Coordinate with engineers, field personnel, vendors, and project teams to incorporate site conditions into final design packages., • Maintain organized project files, drawing logs, and engineering documentation., • Support multidisciplinary engineering teams including electrical, instrumentation, controls, mechanical, civil, and structural disciplines., • Assist with project coordination, drawing revisions, document updates, and revision tracking., • Work on multiple projects simultaneously in a fast-paced engineering environment., • Support project schedules and deliverables while maintaining quality and accuracy., • Perform other duties as assigned. Required Qualifications • 3–10 years of electrical design experience in industrial, utility, infrastructure, consulting engineering, or related environments., • Strong working knowledge of AutoCAD, AutoCAD Electrical, Revit, BIM, and related drafting software., • Ability to read and interpret electrical engineering plans, drawings, specifications, and one-line diagrams., • Experience developing drawings from engineering markups, field sketches, and vendor drawings., • Strong understanding of drafting standards, scaling, and drawing organization., • Experience supporting industrial or utility infrastructure projects preferred., • Familiarity with Microsoft Excel, Word, Adobe Acrobat, and Bluebeam preferred., • Strong attention to detail and organizational skills., • Ability to work independently with minimal supervision while also collaborating within multidisciplinary teams., • Excellent written and verbal communication skills. Preferred Experience • Industrial facilities, • Utility infrastructure, • Power distribution systems, • Substation projects, • Water and wastewater treatment facilities, • Oil & gas or petrochemical facilities, • MCC and switchgear layouts, • Instrumentation and controls, • Brownfield retrofit projects, • Field verification and as-built updates, • Consulting engineering or EPC environments

Job DescriptionDescription: Come join our team! We are hiring an experienced Maintenance Engineer with multi-family experience. In addition to the hourly pay rate, this position is eligible for monthly commissions, benefits, 401(k) with company match, discounted rent at a company-managed property, and more! Successful applicants will have verifiable work experience in the apartment industry in a maintenance position. Qualifications: • Works as a team participant along with the maintenance staff to ensure quality maintenance standards set by the Company are met and exceeded., • 3 to 5 years of verifiable hands-on technical work experience in the areas of plumbing, electrical, carpentry/construction, HVAC, etc., • Ability to work in a fast-paced environment. We offer the following benefits: • Monthly commission eligible, • Paid Time Off:, • 80 hours vacation, • 40 hours sick time, • 16 hours PTO, • 80 hours holiday, • Medical, Dental, and Vision Insurance, • Life & Disability Insurance, • 401(k) with employer match, • Training, • Advancement opportunities, • Discount rent at the company-owned property Performs various maintenance duties and handles service requests requiring technical labor skills including, but not limited to HVAC repairs and adjustments, electrical installations, plumbing, pool maintenance, light carpentry/construction, dry-walling, painting, vinyl repair and installation, as well as appliance repairs. Works as a team participant along with the maintenance staff to ensure quality maintenance standards set by the Company are met and exceeded. • Assists in preparing all vacant apartments to a market-ready status by inspecting the condition of electrical, HVAC, plumbing, appliances, drywall, porches, and exterior construction, etc., and repairing these items as necessary. Must participate in asbestos and lead training or at least be aware of the specific requirements., • Responds to resident service requests and concerns in a timely manner., • Performs on-call emergency service as required., • Diagnoses and troubleshoots mechanical and structural problems., • Reports any maintenance concerns for repairs on vacants, models, clubhouse, and/or common areas to the Maintenance Supervisor., • Serves as the individual responsible for maintenance in the absence of the Maintenance Supervisor and serves as a role model to peers., • Works closely with management and maintenance staff in developing an integral team that effectively represents the quality and professionalism of GWR Management., • Maintains open communication with the Property Manager and Maintenance Supervisor, • Attends and participates in training seminars as requested., • Assists other staff members as needed., • Attends and assists in setting up for resident functions and activities., • May assist in monitoring and/or controlling maintenance inventory and/or supplies. Maintains Company tools, equipment, and vehicles in good condition., • Drives motorized vehicle on or off property for Company business as needed., • Moves heavy objects as requested., • Assists the Maintenance Supervisor or Property Manager on special maintenance projects, i.e., preventative maintenance of building components and/or mechanicals., • Assists in keeping the grounds and common areas free of trash and debris., • May assist the Maintenance Supervisor in assigning service requests., • May assist in training and development of the maintenance staff., • Represents the Company in a professional manner at all times, on or off the property. Consistently maintains a professional, courteous attitude when dealing with residents, coworkers and the general public., • Performs other duties as assigned.Requirements:, • HVAC/EPA Certified, • Current Valid Driver's License required, • Pre-employment background screen is required, • After hours on-call, • 3-5 years verifiable multi-family maintenance experience, • Team player with great attitude

Job Description Bristol is hiring a Construction Surveillance Engineer to support the Navy at NAS Corpus Christi and Kingsville. Essential Job Duties and Responsibilities: The CSE shall provide management support to the FEAD/ROICC for construction services such as construction inspection, quality assurance, monitoring ESS compliance and contract administration. The construction work includes repair, demolition, and new construction that the office executes for various commands and tenants on the installation. Work will encompass all trades that are typical for repair, demolition, and new construction projects. Specific workload will be identified upon arrival. • Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items., • Attend Meetings and Conferences. The CSE shall take notes, provide information to the FEAD/ROICC or the FEAD/ROICC’s representative at meetings, conferences, and briefings. Includes: Preconstruction Conference, Safety Meetings, Contractor Quality Control (CQC) Meetings, Partnering Meetings., • Provide Construction Briefings and Reports., • Provide review of submittals designated for Government approval., • Provide construction schedule review/analysis and notes/comments/recommendations on: Progress Schedules and Network Diagrams, Contractor’s Safety Plan, and CQC Plan., • Monitor construction work for project CQC compliance with the contract and Contractor submitted plans., • Prepare Construction Representative’s Reports (CRRs) and Contract Construction Compliance Notices (CCCNs)., • Report instances of non-compliance with safety requirements., • Monitor compliance with environmental protection requirements; monitor measurements and assurance surveying; monitor materials testing, • Witness testing of waste, gas, water, electrical, heating, ventilation, air conditioning, fire protection, elevator, boiler, and energy monitoring control systems., • Review Daily Contractor Quality Control (CQC) and Contractor Production Reports (CPRs); monitor the updating of Submittal Status Logs; and other required documentation., • Work with the CSET and FEAD/ROICC personnel to complete, together with the construction Contractor’s representative, the field pay estimate worksheet for the construction contract., • Notify FEAD/ROICC Leadership of disagreements, discrepancies, or major problems., • Assist conducting pre-final inspections., • Provide advice for modification negotiations., • Maintain Working Files. NAVFAC’s Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents., • Prepare an independent construction cost estimate for modifications to construction contracts; prepare, for each modification cost estimate, a narrative assessment of the impact of the proposed change on the construction Contractor’s operations., • Provide Construction Photographic and Record Drawing Services., • Perform Constructability Review Services; perform spot checks for completeness and accuracy of the construction plans and specifications and to determine the constructability of the facility at the beginning and duration of each Phase of Construction., • Requests for Information (RFI) management.Job Qualifications and Skills:Experience:, • A minimum of seven (7) years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued in excess of $5 million., • Construction technical competencies and qualifications to verify that a specific level of workmanship was obtained., • Knowledge of construction scheduling methods and familiarity with the use of scheduling software, including but not limited to Primavera Suretrak/P3/P6 and Microsoft Project., • Proficiency in using computer software programs such as Microsoft Word, Excel, PowerPoint, and Outlook; Adobe Acrobat Professional; and RS Means/CostWorks., • Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven, or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites., • Ability to communicate effectively, concisely, and authoritatively in English both orally and in writing. Experience in preparing correspondence, written reports, and in briefing management personnel., • Experience in developing and maintaining complex, long term, multi-year program construction management activities including submittal and Request for Information (RFI) processing., • Experience and familiarity with Federal building design criteria and construction guide specifications., • Knowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installation., • Ability to accurately calculate construction costs for changes, price the value of needed work, and provide recommendations for equitable adjustments., • Ability to monitor the preparation of as-built activities of contractors to ensure that those documents are being prepared on an on-going basis. Ability to review contractor submissions of as-built drawings for completeness and accuracy and advise in writing the appropriate Government personnel as to the acceptability of such submissions., • Ability to identify critical and long lead-time materials and recommend procurement strategies to prevent negative impact on quality, cost, and schedule., • Completed 30 Hour OSHA Construction Training within the past 2 years., • Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding, • S. Citizen, • A valid driver’s licenseEducation: Bachelor’s Degree in one of the following areas: a degree in engineering from an ABET accredited university; a degree in construction management from an ABET or ACCE accredited university; or a degree in architecture from a NAAB accredited university. The CSE may substitute the degree requirement with an additional five (5) years of experience beyond the experience requirement of a minimum of seven (7) years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued in excess of $5 million. Benefits Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health plan including medical, dental, vision, life, short-term disability insurance, and 401(k) plan with employer match. Equal Opportunity Employer Statement Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment. Bristol grants employment preference first to BBNC and Choggiung shareholders, their spouses, or descendants, and second to Alaska Native Corporation shareholders in accordance with P.L. 93-638. Disclaimer This job description is not intended to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. This job description is not a contract or employment. It does not promise or guarantee any particular benefit or specific action. All employment with Bristol is “at-will” which means that Bristol or employee can terminate the employment relationship at any time with or without cause.

Job DescriptionJob Purpose:Performs routine inspection work in petroleum, petrochemical terminals, and refineries; also performs inspection work on board barges and ships following industry standards and the procedures as well as the sampling and transportation of samples to the company’s laboratory and storage facilities. Duties and Responsibilities: • Take product measurements and samples; accurately and promptly; perform related calculations; complete required reports and forms; perform inventories; do non-petroleum or chemical inspection assignments., • Verify the accuracy of measurement equipment and keep all issued equipment clean and in good condition at all times., • Perform visual cleanliness inspections of tanks including entering confined spaces., • Work safely in the presence of hazardous materials as defined in the appropriate Material Safety Data Sheets., • Perform other inspection department duties assigned by Operations., • Exercise procedural, safety, and quality requirements specified by Coastal Gulf & International., • Attend training and pass appropriate examinations in petroleum, chemical, and gas inspection procedures, including Right-to-Know training, hazardous materials transportation, and other safety training required by applicable regulations., • Inspectors must be ready to accept job assignments at any time and must be willing to work on an on-call basis., • Read and understand all job and safety requirements in English., • Adhere to all company policies and procedures., • All other duties assigned by management. Other Duties: • Management reserves the right to change job duties with or without notice. Additional Requirements: • Ability to read, analyze, and interpret instructional and technical materials relating to procedures, safety; and applicable government regulations., • Write applicable reports and correspondence clearly., • Effectively present information and respond to questions from managers, schedulers, and, • clients., • Basic mathematical skills include; adding, subtracting, multiplying, and dividing into all units of measure, using whole numbers, common fractions, and decimals. Compute rate, ratio, percent, and quantities (linear, volume, or weight), and read and interpolate applicable data and tables., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Interpret a variety of instructions furnished in written, oral, diagram, or schedule formats., • Familiarity with basic computer skills including MS Word and MS Excel., • Inspectors must have a vehicle in good, safe operating condition that can be used on the job for sample transportation., • Local travel and occasional out-of-town assignments are required., • Must be able to work in refineries, terminals, and onboard marine vessels. Qualifications: • Must have internal and external customer service skills., • The candidate must have a valid driver’s license with a clean driving record., • Have a great work history with a track record of being a responsible individual., • Excellent communication skills., • High School Diploma or equivalent., • TWIC card required., • IFIA certification preferred. Working conditions:This position is performed inside and outside weather conditions including extreme heat and cold. Travel: 50-75% of Travel is required. Physical requirements: • The working environment and physical demands described here are representative, but not necessarily all-inclusive, of those that must be met by an employee to successfully perform the essential functions of this job., • Job conditions require standing, walking, sitting, twisting, stooping, crouching, kneeling, talking or hearing, making visual inspections, making precise hand and finger movements, reaching or grasping, lifting and/or carrying up to 75lbs, pushing and/or pulling up to 40lbs, climbing up to 180ft, perceiving color difference, ability to wear personal protective equipment (beards not permitted), and strenuous physical activity., • Office and Field-Based position, petroleum refinery, warehouse/plant environment, out-of-doors environment, driver-based environment including but not limited to chemicals, pressure vessels, tanks, rotating equipment, and working in confined spaces., • Subject to all temperatures, weather, and road conditions. The worker is subject to both environmental conditions. Activities occur inside and outside., • The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat, or exposure to chemicals., • The worker is subject to atmospheric conditions. One or more of the following conditions affect the respiratory system of the skin: fumes, odors, dust, mists, gases, or poor ventilation., • The worker is frequently in close quarters, crawl spaces, shafts, manholes, small enclosed rooms, small sewage and line pipes, and other areas that could cause claustrophobia. AAP/EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin.

Job DescriptionGeneral Description:As a Sr. Site Safety Manager, you will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • Education/Experience:, • B.S. in Safety and Health or equivalent., • At least two (4) years of safety experience or combination of education/multiple years experience in building construction, with a working knowledge of safety/environment principles and techniques., • Bilingual in Spanish and intercultural communication skills is preferred., • Computer skills with familiarity with Microsoft Office. Working Conditions:Physical requirements: • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus., • Requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl., • Occasionally lift and/or move up to 75 pounds., • Regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places, fumes or airborne particles, outside weather conditions and risk to electrical shock.

Job Description TRCTalent, along with a growing engineering and electrical systems company that designs, builds, and delivers automation, instrumentation, and power solutions for major industrial and energy-sector clients currently seeks a Project Manager/Electrical Systems for an onsite role in Corpus Christi, TX . They are seeking an accomplished Project Manager/Electrical Systems with approximately 15 years of related experience to oversee the engineering, procurement, fabrication, and delivery of modular electrical structures, including MCC buildings, medium voltage VFD enclosures, e-houses, and electrical distribution skids. This role will ensure on-time, on-budget delivery of each project from initial order entry and contract review through manufacturing, factory acceptance testing, and final shipment. The Project Manager will serve as the primary point of contact for customers, engineering, procurement, and shop floor manufacturing teams, driving cross-functional coordination and proactive risk management throughout the project lifecycle. This is a highly technical, customer-facing position within an electrical systems integration environment. Candidates should have a strong command of electrical distribution systems and a demonstrated track record of delivering engineered-to-order capital equipment projects in industrial markets such as oil & gas, mining, water/wastewater, or datacenters. Key Responsibilities Project Management & Technical Leadership: Manage end-to-end project lifecycle from contract review and project kickoff through manufacturing, inspection, shipment, and project closeout. Review and interpret customer specifications, single-line diagrams, equipment layouts, scope-of-work documents, and purchase order terms to establish a clear project baseline. Develop, issue, and maintain project schedules, budgets, cost tracking reports, and resource plans; update stakeholders on a regular cadence. Coordinate across internal teams including electrical engineers, mechanical designers, procurement specialists, shop floor supervision, etc., to meet project milestones and quality requirements. Manage customer-initiated change orders, Requests for Information (RFIs), and submittal packages; negotiate scope, schedule, and cost impacts with customers and internal stakeholders. Review, approve for purchase, and track material procurement including milestones for long-lead items including power transformers, medium-voltage VFDs, switchgear, and specialty components; actively expedite vendors to protect the project schedule. Conduct internal project review meetings and lead customer-facing milestone events including design reviews, submittal approvals, and Factory Acceptance Tests (FAT). Identify, document, and proactively mitigate project risks; escalate critical path issues to management with recommended corrective actions. Provide detailed review and final approval of internally developed engineering drawings, calculations, equipment documentation prior to release to customers and/or shop floor for fabrication or integration. Ensure all deliverables comply with applicable codes and standards including NFPA 70 (NEC), UL 508A, UL 891, IEEE, NEMA ICS, and IEC requirements as specified by the customer. Assist with shipping and logistics planning for oversized and heavy equipment (electrical skids, modular E-houses); coordinate rigging plans, transport permits, and carrier requirements with the logistics team. Support the proposals and estimating team by providing project-specific technical clarifications, schedule input, and lessons-learned feedback during the bid phase. Monitor job cost performance against budget; identify and communicate variances; collaborate with finance on project billings and cost-to-complete forecasts. Maintain thorough project documentation including meeting minutes, action item logs, submittal registers, and change order files in the company ERP and document management systems. Mentorship & Organizational Impact: Mentor and guide junior project managers and coordinators as needed, sharing best practices in schedule management, customer communication, and technical problem-solving. Contribute to the optimization and development of internal standards, templates, and best practices for modular and prefabricated design. Support business development by contributing technical expertise to proposals and client discussions. Work Environment & Physical Requirements Primary work location is an office environment near or within a manufacturing facility; regular presence on the production floor is required. Occasional travel to customer sites for design reviews, factory acceptance tests, site surveys, or project kick-off meetings — estimated 10% travel depending on project portfolio. Must be able to navigate manufacturing and construction environments safely, including wearing appropriate Personal Protective Equipment (PPE) — hard hat, safety glasses, and steel-toed boots as required. Qualifications: Bachelor’s degree in electrical engineering or similar is preferred, but applicable electrical discipline industry experience is just as valuable. Approximately 15 years of broad project management experience in the modular fabrication space with a focus on electrical distribution. Highly knowledgeable of applicable codes and standards (NFPA, NEMA, API, UL, etc.). Self-motivated with strong interpersonal, organizational, communication, technical, and documentation skills. Preferred: Experience with BlueBeam Revu Preferred: Registered Professional Engineer (PE) Preferred: PMP Certification Company Description: TRC Talent Solutions is proud to be an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, protected veteran status, disability status, sexual orientation, gender identity or expression, marital status, genetic information, or any other characteristic protected by law. At TRC, we take pride in fulfilling our opportunity to add value to our client's business as their staffing partner, while working tirelessly to connect thousands of individuals each year with work opportunities where they can meet the needs of their families and have the potential to build their careers

Job Description • Execute maintenance on various military aircraft as a Contract Field Team technician, • Travel for extended periods working at various locations, • Train on routing aircraft electrical wire harnesses, basic wire terminations and various other maintenance tasks, • Interpret technical manuals, work cards, blueprints, wire diagrams/schematics, and engineering drawings, • Maintain shop supplies and perform preventive maintenance on assigned equipment, • Operate complicated shop tools and equipment as trained and assigned, • Perform inventory control using logging, tagging, and organizing procedures, • Maintain tool control and accountability, • Adhere to company policies and safety programs, • Other duties as assigned Requirements Education/Training: • High School diploma required, • Associate’s Degree in management or technical/scientific discipline preferred, • Current Federal Aviation Administration (FAA) Airframe and Powerplant (A&P) License required Experience: • 3+ years of professional experience in the required task area required, • Broad working knowledge of FAA regulations, aircraft maintenance and inspection requirements, • Knowledgeable in documenting maintenance actions in any of the following (USAF, USN and US Army) aircraft records to include digital maintenance data systems, • Familiar with the installation of aerospace fasteners, rivets, nut plates etc. Security: • Must be a US citizen, • Ability to obtain a security clearance may be required, • Successful candidates must obtain minimum favorable Tier 1 personnel security investigation IAW Department of Defense Instruction 5200.46, DoD Investigative and Adjudicative Guidance for Issuing Common Access Card (CAC) Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Training & Development, • Wellness Resources

Job DescriptionJob title: Inside Sales Representative Reports to: Operations Manager Classification: Non-exempt Schedule: Monday – Friday, 8 AM – 5 PM / 40 hours a week Summary/Objective:The Inside Sales Representative position is responsible for developing and maintaining new and existing customer relationships to sell products and services for Wholesale Electric. Essential Functions: • Answering customers’ questions about products, prices, availability, product uses, and credit terms., • Recommending products to customers based on their needs and interests., • Contacting regular and prospective customers to demonstrate products, explain product features, and solicit orders., • Estimating or quoting prices with delivery dates., • Consulting with clients after sales or contract signings to resolve problems and providing ongoing support., • Preparing estimates and bids that meet specific customer needs., • Forwarding orders to manufacturers., • Performing additional assignments at the direction of the supervisor. Competencies:, • Knowledge of Microsoft Word, Excel, and Outlook., • Ability to work independently., • Ability to communicate effectively., • High degree of professionalism., • Strong math skills., • Customer-service driven. Supervisory Responsibility:The Inside Sales Representative position does not have any direct supervisory responsibilities. Working conditions:Work Environment:This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands:While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand and walk. This is a largely sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bending or standing on a stool as necessary. Position Type and Expected Hours of Work:This is a full time position. Days and hours of work are Monday through Friday, 8:00am-5:00pm. The employee must work 40 hours each week to maintain full-time status. Occasional evening and weekend work may be required as job duties demand. Education and Experience:, • 5 years of sales experience in the Electrical Distribution Industry required., • Industrial Contractor Sales experience preferred., • High School diploma or equivalent required., • College degree(s) preferred.

Job Description seeking a Designer with 10 – 20 years of Mechanical and/or Electrical Design experience to join the team. This individual will work under the supervision of experienced designers/engineers in the electrical and mechanical consulting industry to produce mechanical and electrical system designs (plumbing, HVAC, lighting, power, and instrument/control systems) for industrial facilities, municipal buildings, educational buildings, and commercial buildings. Duties & Responsibilities: • Translate and convert hand drawings and sketches into AutoCad/BIM., • Read, evaluate, and interpret designs and drawings., • Provide accurate, detailed, and to scale drawings., • Conduct site visits and surveys, when required., • Maintain accurate records., • Not all work is individual, as you could be working with a team of other technicians or design engineers., • Work is project-based and can involve working to tight deadlines and providing updates or changes to plans last minute., • You may also be required to work on multiple projects at once., • All other duties as assigned. Minimum Qualifications / Experience: • Minimum of 5 years of experience, • Working Knowledge of Revit / AutoCad / BIM, • Clear understanding of scaling, • Able to read plans, • Capable of creating plans from mark-ups, • Familiar with Excel, • Familiar with Adobe Acrobat, • Familiar with Microsoft Word, • Strong verbal and written communication skills, • Able to follow instruction and perform task given with minimal supervision, • Working knowledge and direct design experience with HVAC, Plumbing, Electrical design, • Work from architectural plans and base files to produce engineering construction documents in AutoCAD or Revit

Job DescriptionConcrete Superintendent Summary Description: A concrete project superintendent is a person who plans and ensures the coordination of concrete construction and has the responsibility of supervising the concrete portions of the project. The Superintendent ensures that quality work is being put into place, the schedule is being maintained, and that the budget is followed as planned. Responsibilities are all encompassing of the total supervision of all the concrete operations on the site to ensure that the workers are implementing what is designed, project is completed on time, and that safety and company standards are met. Concrete Superintendents work hand in hand with the General Contractors to assure accurate and timely sequencing of the project that best benefits BB Concrete and the job. Concrete Superintendent also coordinate on a weekly basis with the Operations Managers and Project Management for global manpower and resource scheduling as well as successful project communication and execution. Specific Responsibilities: • Coordination with Operations managers for all concrete schedules/operations., • Daily communications/coordination with the Project Management staff to ensure successful project communication and execution., • Being on site to supervise and oversee all concrete construction processes., • Ensuring that the budget is followed in terms manpower productions and material expenditures., • Organizing and scheduling the field labor and ensuring that they are performing as required., • Coordinates with other subcontractors and ensures proper planning and work harmony., • Ensure that quality is preserved in the concrete construction process and that the budget is maintained., • Tracking and reporting project progress on a daily and weekly basis., • Tracking and accurately capturing/reporting time for the field manpower they oversee., • Continuously monitor productivity and percentage complete, identifying problems and potential delays, and provide solutions to overcome and delays or challenges. Job Specific Competencies/behaviors:, • Vast knowledge and experience of concrete construction ranging from Footings, walls, flatwork, tilt up, paving., • General knowledge of scheduling concrete work activities and how they relate to other trades and scopes of work., • Safety Conscious and willing to implement the CSI safety culture to our projects., • Has adequate level of Spanish speaking skills to communicate with the field labor as needed., • Has good listening skills, builds strong relationships, is flexible/open-minded, negotiates effectively, solicits performance feedback and handles constructive criticism. Education/Experience/Attributes: • 10 or more years experience in commercial/industrial concrete construction, on projects of 2+ million, ideally with specific experience in Tilt-up Construction., • Previous experience as a Concrete Superintendent is a must., • Ability to effectively supervise construction employees and to accomplish work within budget and schedule., • Able to maintain positive working relationships with all construction groups - management, owners, trades and subcontractors., • Able to balance and prioritize multiple deadlines., • Excellent communication skills., • A solid understanding of the company's Safety First philosophy and practice., • An above-average working knowledge of technology and related resources., • Very strong work ethic with the willingness to travel and/or relocate., • Regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places, fumes or airborne particles, outside weather conditions and risk to electrical shock., • Noise level is usually moderate to very loud., • Motivated, hardworking, team player.

Job Description An Automotive Technician plays a critical role in diagnosing, repairing, and maintaining a wide range of vehicles. This position requires expertise in using manufacturer-specific diagnostic tools to accurately identify vehicle issues and independently perform repairs and maintenance tasks. The technician services a combination of vehicle types with minimal travel involved, ensuring vehicles operate safely and efficiently. Responsibilities • Perform vehicle diagnostics using manufacturer-specific tools, • Conduct engine repairs and maintenance, • Maintain and repair brake systems, • Service and repair vehicle transmissions, • Troubleshoot electrical systems and components, • Engage professionally with customers regarding vehicle issues and services, • Execute preventive maintenance tasks to avoid future breakdowns, • Replace worn or defective parts following manufacturer guidelines

Job Description The Automobile Technician plays a vital role in maintaining and repairing vehicles, ensuring optimal performance and safety. Working within a small team of 1-3 technicians and reporting to the Lead Technician, this role requires expertise across engine repair, brake maintenance, electrical diagnostics, and preventive care. The technician will handle mixed responsibilities across all vehicle systems without the need for travel, focusing on delivering quality service through detailed diagnostics and timely repairs. Responsibilities • Perform engine repairs and diagnostics, • Maintain and repair brake systems, • Conduct electrical system diagnostics and troubleshooting, • Execute preventive maintenance on vehicles, • Communicate effectively with customers regarding repairs and maintenance, • Replace parts as necessary to ensure vehicle function, • Test vehicle systems to confirm repair quality Preferred Qualifications • 2+ years of experience in automobile repair, • Vocational training in automotive technology, • Proficient in engine diagnostics and brake systems, • Knowledge of electrical systems and manual transmission repair, • Strong customer service and problem-solving skills, • Attention to detail and time management, • Commitment to safety compliance

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $30.00- $45.00 hr., • Sign On Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: WHY JOIN US We understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include: • Competitive pay including a quarterly bonus plan, • Medical, Dental, Vision and Prescription coverage, • Paid vacation and holidays, • 401(K) match, • Life insurance, AD&D and long-term disability, • Tuition reimbursement, • Paid online training and state-of-the-art training facility to invest in YOUR career growth, • Opportunities available nationwide, • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more, • Pet Insurance, • Legal Plan, and ID Theft Protection. Qualifications: JOB SUMMARY This position is responsible to assist in the repair and overhaul equipment, refrigeration, heating and ventilation equipment to ensure customer needs are met efficiently, accurately and on-time. JOB REQUIREMENTS • High school diploma/GED., • EPA certification., • Certification from an accredited vocational-technical or trade school a plus!, • Minimum 3-4 years of commercial refrigeration experience required., • Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus., • Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful., • Must have a good driving record and be able to work independently., • Emergency on-call availability is a basic requirement., • Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time., • Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, electrical and mechanical control devices in a safe, efficient and timely manner that exceeds customers’ expectations, • Provides general repair work on refrigeration, heating and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors in a safe and timely manner., • Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base., • Test malfunctioning systems and components using electrical and/or mechanical skills., • Maintain legible corporate and personal records of work history., • Provides department support by processing job tickets, work orders to the necessary department in a timely manner., • Provides support by picking up, delivering and installing cases., • Perform work on minor construction and remodeling projects including startups of new installations., • Drives company vehicle in a safe manner., • Performs other related duties and projects as assigned by management. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on and . CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Position Summary \n The Assistant Site Manager supports the Site Manager in overseeing daily operations at a Bitcoin mining facility. This role ensures that the site operates safely, efficiently, and in compliance with company standards. This is a full-time, on-site role based in Corpus Christi, Texas. \n \n The Assistant Site Manager provides hands-on leadership to operations staff, coordinates maintenance and repair activities, manages contractors and vendors, and drives continuous improvement initiatives across site operations. \n \n Key Responsibilities \n\n • Support the Site Manager in overseeing day-to-day site operations, including miner uptime, cooling systems, power distribution, and networking\n, • Supervise site staff, contractors, and vendors, ensuring adherence to safety protocols, site policies, and operational procedures\n, • Assist in planning, scheduling, and executing preventative and corrective maintenance activities\n, • Monitor site KPIs (hashrate, uptime, PUE, power curtailment, etc.) and provide timely reporting to management\n, • Manage inventory of spare parts, tools, and consumables; coordinate procurement as needed\n, • Ensure compliance with all Health, Safety, and Environmental (HSE) requirements, conducting routine safety checks and supporting training initiatives\n, • Act as acting Site Manager in the absence of the Site Manager\n, • Collaborate with engineering, IT, and corporate operations teams on site upgrades, testing, and new deployments\n, • Support emergency response, troubleshooting, and escalation protocols for site incidents\n\n \n Minimum Qualifications \n\n • 3–5 years of experience in operations, data centers, industrial facilities, or mission-critical infrastructure\n, • Experience with electrical systems, cooling systems, or IT/network operations strongly preferred\n, • Demonstrated ability to coordinate with contractors and vendors for site-level projects and repairs\n, • Minimum 2 years of supervisory or team lead experience in operations, technical, or industrial settings\n, • Strong leadership, coaching, and communication skills; ability to motivate and manage frontline teams\n, • Experience in enforcing HSE standards, conducting toolbox talks, or leading safety programs\n, • Proven ability to balance hands-on technical work with administrative responsibilities such as scheduling, reporting, and compliance\n, • Ability to make sound operational decisions under pressure, including during equipment failures or curtailments\n\n \n Preferred Qualifications \n\n • Bachelor’s degree in Engineering, Information Technology, Industrial Technology, Business Management, or related field (preferred); associate degree in technical discipline with equivalent field experience (acceptable)\n, • Relevant certifications in electrical, mechanical, or data center operations\n, • Familiarity with cryptocurrency mining, data center infrastructure, or power/energy management\n\n \n Physical & Work Environment Requirements \n\n • Ability to lift up to 30 lbs regularly and up to 65 lbs occasionally\n, • Ability to stand, walk, bend, and move equipment for extended periods\n, • Ability to work around high-voltage equipment while adhering to strict safety protocols\n, • Ability to work in all environmental conditions typical of industrial mining sites, including elevated noise levels, temperature extremes, and varying weather conditions\n\n

Job Description This is Not a Government Position. This position is at the Corpus Christi Army Deport (CCAD), TX. LESCO is seeking candidates for an electrical/mechanical/aerospace engineer to provide aviation-engineering support to the Army Futures Command (AFC), Aviation Engineering Directorate (AED), Maintenance Engineering Division (FCDD AMR-AM), co-located at the Corpus Christi Army Depot (CCAD), TX. This support includes providing on-site engineering capability necessary for depot-level maintenance production support of requirements for aircraft components, power plants, aircraft systems and mission systems to include the UH-60 Blackhawk, CH-47 Chinook, AH-64 Apache, and RQ-7/MQ-1C Unmanned Aircraft Systems (UAS). Job duties will include but are not limited to: supporting government engineers with expert advice, analysis, research, and technical guidance for Army rotary aircraft and associated subsystems (i.e., hydraulics, electrical, power plant, drivetrain and airframe). Evaluating work for adherence to government policies, plans, procedures, and management requirements. Providing analytical skills to support and evaluate engineering dispositions. Working independently and able to understand, anticipate, and act on the requirements of senior leaders. Writing detailed technical substantiation analysis, reports, and briefings. Support and coordination as necessary with other organizations in the development and/or substantiation of depot and field level maintenance policies and procedures, modifications, upgrades, repairs, technical data revision/improvement, field inspection, and new depot and field maintenance concepts. Must be a US citizen Bachelor of Science Degree from an accredited university Must have or be able to obtain and maintain a Secret Clearance Knowledgeable in Army aviation technical manuals Knowledgeable in rotary aircraft electrical and structural depot level engineering repairs Must have excellent communication, interpersonal skills, and able to work independently Army aviation experience Previous military experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Must be able to walk or stand on level and/or inclined surfaces and sit for extended periods of time. Must be able to routinely grasp or handle objects, use finger dexterity, bend elbows / knees, and reach above / below shoulders. Must be able to routinely climb / descend stairs. Job Posted by ApplicantPro

We are offering a $2,000.00 sign on bonus for a second shift diesel mechanic. We have an immediate position open for a Diesel Mechanic to work on our fleet of garbage trucks at our Corpus Christi, Texas location. This position is heavy in preventative maintenance, electrical, and hydraulics along with engine diagnosis and minor engine repair. We have an excellent management team. We offer stability and consistent overtime along with opportunity for advancement. Monday-Friday, night shift typically from 12pm with some weekends. 10-12 hour shifts and occasional Saturdays for extra OT. We offer top hourly wage and because of all the OT our mechanics make great money plus we offer family benefits, 401k, and vacation. The ideal candidate will possess: 2+ years’ experience in heavy diesel truck maintenance and repair. Class A or B CDL is a plus. Be able to work in all weather conditions. #ACBoost Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

Job Description Atlas Pressure Control provides oilfield pressure-control equipment and services, with a focus on wellhead and drilling and production solutions. This role supports the work that keeps critical equipment ready for use by helping ensure products are assembled, tested, maintained, and prepared to meet operational requirements. As an Assembly Technician, you will play an important part in the preparation and upkeep of wellhead and frac rental equipment. This is a hands-on role for someone who takes pride in quality workmanship, values safe work practices, and is comfortable contributing to day-to-day shop operations that support the broader business. Responsibilities • Assemble, test and paint wellhead and frac rental equipment., • Practice safe work habits and comply with quality, safety, health and environmental policies., • Inspect, operate and test completed products to verify function and conformance., • Position and align components for assembly manually or using hoists., • Torque connections using manual and hydraulic torque wrenches., • Adjust, repair, rework or replace parts and assemblies to eliminate malfunctions and ensure proper operation., • Read and interpret assembly drawings or standard operating procedures., • Maintain and lubricate parts or components., • Perform other regular duties as assigned or requested. Requirements QUALIFICATIONS AND EDUCATION REQUIREMENTS • High school diploma or GED; or a minimum of 2 years of related experience and/or training; or an equivalent combination of education and experience., • Basic computer proficiency., • 3+ years of experience in the oil and gas industry., • Experience with drilling and production equipment., • Knowledge of wellhead and frac rental equipment., • Eligible to work in the United States.CERTIFICATIONS, LICENSES, REGISTRATIONS Valid driver's license required. PHYSICAL DEMANDS • Regularly required to stand, walk, reach with hands and arms, and talk and hear., • Regularly required to use hands to finger, handle, or feel., • Able to regularly lift up to 10 lbs, frequently lift up to 25 lbs, and occasionally lift up to 40 lbs., • Close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.WORK ENVIRONMENT, • Able to work in an inspection and assembly environment with occasional exposure to loud noise, heavy equipment, temperature extremes, electrical equipment, and high-pressure testing. Benefits Why Atlas Pressure Control? At Atlas, you're not just filling a role - you're helping build something. As a growing company, we move fast, think creatively, and value the people who bring fresh ideas to the table. You'll have direct visibility into the executive team and real opportunity to make your mark in a company that's still writing its story. Benefits & Perks • Employer-sponsored life insurance, • Medical coverage options including a High-Deductible Health Plan (HDHP) with employer HSA contributions, • Competitive paid time off Join the Atlas Pressure Control team where we are - Responsible, Reliable, and Relentless.

Job DescriptionDescriptionJob Summary: Diagnoses, repairs, reconditions, and adjusts key systems and components of trucks and related equipment.Senior-level position – Generally has more than six years of experience and/or demonstrated job relevant knowledge/skills. A level three technician has a broad knowledge of the field’s standard and technical concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of standard, complex, and technical tasks; is self-starting and requires minimal supervision.The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions • Models, promotes, reinforces, and rewards the consistent use of HOLT's Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses complex engine malfunctions and failures with direction and minimum supervision, • Performs detailed engine and related equipment repairs on trucks and trailers with direction and minimum supervision, • Disassembles, inspects, determines parts required, and reassembles to factory specifications within TRGs, • Provides quality control/assurance inspections of completed tasks to include road testing, • Uses computers and related software to assist in diagnosing and reprograming engines, • Completes documentation for service reports, timecards, parts requisition and returns, • Interprets and utilizes information from operating, maintenance, online resources, and service manuals/bulletins, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Works overtime as required by workload and customers’ needs, • Projects professionalism with both internal and external customers, including personal appearance, • Acts as a mentor and coach to lower level Technicians, • Completes all assigned Technician Training Path courses and safety training, • Consistently maintains an average rework of less than 0.5%, • Ensures a positive average variance consistently, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities • Ability to meet all requirements as outlined in Leveling Description Guide to include; Basic Requirements, Electrical System, Engine Systems, and Rear Differential, • Ability to meet all technical and performance requirements for a level one and level two technician, • Extensive knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Expert knowledge and proficiency with current computer software, related hardware, and electronic systems diagnostic tooling, • Operation and control skills of vehicle fleet, • Problem-solving and troubleshooting skills, • Verbal communication skills, • Exceptional skills in customer service, • Excellent time management and organizational skills, • Ability to follow logical troubleshooting procedures, • Ability to work independently and as part of a team, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair & overhead crane, • Ability to operate a vehicle on public roads, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools (Learn) RequirementsEducation and Experience: • High school diploma or equivalent, accreditation from a technical school or an applicable skilled trades program required, • Minimum of three years of experience required, • CDL – Class A or B required, • ASE – Medium/Heavy Truck Certification four or more preferred, • AC Certification Required, • Brake System Certification Required, • Has met HDSI requirements for preceding Technician levels; Ability to model and teach Holt’s VBL Culture, • On-going Safety Training requiredSupervisory Responsibilities:, • NoneTravel:, • Up to 5% travel or overnight stays, • Up to 5% travel to other stores that require help during times of heavy workloads may be expectedAdditional Requirements:, • Must own and maintain the necessary tools to efficiently perform the job, • Valid driver’s license and acceptable driving recordPhysical Requirements:, • Significant amount of time spent standing, • Constant movement and use of hands, this position requires good manual dexterity, • Communication with customers and constant communication with co-workers, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Lifts and moves materials and equipment up to 50 lb, • Occasional kneeling, crouching, stooping, crawling, reaching, and balancing, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipmentWork Environment:, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Frequently works in an enclosed vehicle or equipment, • Requires wearing common protective or safety equipment, • Exposure to high noise levels, • Works in extremely bright or inadequate lighting, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Exposure to minor burns, cuts, bites, or stingsDisclaimer:Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionDescription: Our Commitment To You: • Competitive wages, • Medical insurance plan, • 401k retirement, • A professional and respectful work environment, • Paid vacation/holidays, • Employee vehicle purchase program Responsibilities (include but are not limited to): • Efficiently perform the needed services by utilizing state of the art automotive equipment., • Assist technician mechanics in performing technical activities., • Inspect, diagnose and repair to specifications – vehicle automotive systems including engine, transmission, brake and hydraulic, exhaust, primary and/or advanced fuel ignition and electrical, steering, suspension and alignment, braking, air conditioning, and computer systems., • Adequately explain discovered technical diagnoses and required repairs to service advisors and if necessary to customers., • Continuously seek out and learn new technical information, equipment, tools and techniques in formal training sessions in order to stay abreast with rapidly changing technology., • Professionally record findings on approved documents so that necessary customer estimates and proper repairs can be made., • Assist technician/mechanics in performing technical activities., • Keeps store management aware of mechanical repair problems as they occur., • Maintain and secure work tools., • Turn off and lock out equipment when not in use., • Maintain an organized, clean and hazard free work environment., • Other duties as assigned.Requirements: Our Ideal Candidate Will Possess: • Experience in automotive mechanical diagnosis, problem-solving and repair experience to succeed in this position., • A high level of motivation and energy and strong customer service skills are also required., • Appropriate hand tools necessary for services performed., • Safe working knowledge of shop tools and equipment such as scanners, electrical diagnostic equipment, A/C recovery equipment, fluid exchange equipment, lift operation, etc., • Automotive Service Excellence (ASE) and A/C Refrigerant handling certifications are a plus, but not required unless performing A/C or other license required services., • Ability to identify, comprehend and act on changing requirements; ability to work well under different environment conditions., • Ability to bend, stoop, reach and retrieve; lift, move, carry, and load items of various sizes and weights in operable and undamaged condition., • Ability to communicate and understand English and Spanish; including reading and writing., • Maintain a valid driver license, ability to drive a variety of vehicle types, insurable., • High School Diploma or equivalent Working Conditions: Must be able to stand on concrete or metal surfaces for extended periods of time. Work in an environment that frequently experiences extreme hot and cold temperatures, loud noises, and exhaust fumes. Lift and move inventory items, trashcans and other work related items (up to 50 pounds). Must be able to stand and move six to eight hours per day. Must be able to push, pull, pull up, bend at the knees and waist, twist body at the waist, raise and hold arms overhead, turn head-neck-shoulders as needed, grasp and hold tools and other items with hands, for either extended periods of time or many times throughout the shift.

Architect (CAD & Construction Documentation).Multi-Sheet Electrical Schematics.AI data lab for training frontier models and evaluating AI agents.Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more.AI systems learn, reas

Note : This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the healthcare job market. Looking to start a rewarding career path in the healthcare industry? Use Dreambound to find a Electrocardiogram program that will prepare you for this high-demand, entry-level role. What does an ECG / EKG Technician do? An ECG / EKG technician conducts diagnostic tests to measure and record the electrical activity of the heart, helping physicians diagnose and monitor cardiac conditions. Highlights : • Complete in just a few weeks, • Flexible hybrid and in-person options available, • Affordable payment plans Cost : This program is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

Summary Job title: Delivery Driver / Warehouse Associate Job ID: null Department: Corpus Christi - COL Location: null-null Description Summary: A Delivery Driver and Warehouse Shipping and Receiving Clerk will split their time between completing deliveries and working in the warehouse. Each day will be different, depending on shipments and customer orders. Ideal candidates will be able to work well with a team and on their own. Benefits: 401k, medical, vision, and dental insurance CED is an Equal Opportunity Employer | Disability and Veteran Status Reports to: Profit Center Manager Minimum Qualifications: In order to operate our trucks, you will need a valid driver's license and a clean driving history. A CDL endorsement is not required. Authorization to work in the United States. Willingness to undergo a background check. Preferred Qualifications: Relevant Experience. Working Conditions: Warehouse environment and outdoor conditions including sometimes extreme hot/cold temperatures. Deliveries in all weather conditions including during extreme hot/cold, rain and other seasonal conditions. Supervisory Responsibilities: No Essential Job Functions: + Legally operate a motor vehicle and maintain a driving record that meets company standards + Load all order fulfillment materials onto the truck for delivery and unload at delivery + Communicate any vehicle mechanical problems to direct supervisor + Perform daily inspection and maintenance on company vehicle + Deliver/pick up merchandise to/from customers and suppliers promptly, efficiently, and in a professional manner + Pick up material from vendors + Receive incoming freight + Keep a clean and organized warehouse + Stock material on shelves + Pick orders + Processing returns from customers and to vendors + Operate a Microsoft-based computer system CED is an Equal Opportunity Employer - Disability | Veteran Compensation Range: The compensation range for this position is $14 to $20 hourly. Other Compensation: The following additional compensation may be applicable for this position: + Profit Sharing

Delivery Driver / Warehouse Associate Job ID: null Department: Corpus Christi - COL Location: null-null Description Summary: A Delivery Driver and Warehouse Shipping and Receiving Clerk will split their time between completing deliveries and working Warehouse Associate, Delivery Driver, Warehouse, Driver, Delivery, Associate

PhD Engineer (Electrical, Mechanical, Chemical). Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. PhD Engineer (Electrical, Mechanical, Chemical).

Job Description Commercial Chiller Service Technician - Centrifugal H and G Systems | Corpus Christi, TX $45–$55/Hour + Take-Home Vehicle | Full-Time, Year-Round 100% commercial and industrial work — no residential calls. Service hospitals, data centers, and manufacturing facilities with a respected DFW mechanical contractor since 1968. Top Perks • $45–$55/hr based on experience, • Take-home vehicle, dispatched from home, • 90% employer-paid medical insurance, • 401(k) with 6% match, • PTO + 8 paid holidays, • Tuition/book reimbursement for continued training, • Relocation assistance available What You'll Do • Diagnose, repair, and maintain centrifugal chillers and large HVAC systems, • Troubleshoot mechanical, electrical, refrigeration, and control issues, • Perform start-ups, commissioning, and preventative maintenance, • Read schematics and complete digital service reports What You Need • 5+ years servicing centrifugal chillers or large commercial HVAC, • Experience with York, Trane, Carrier, Daikin, or similar, • EPA 608 Universal Certification (required), • TDLR license (required), • Valid driver's license, insurable record Work exclusively on advanced commercial equipment — no residential service or replacements. Apply today for a confidential conversation.

Job Description Company Description: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions — with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: • Process Control & Safety Systems, • Control Valves & Regulators, • Isolation Valves & Actuation, • Oil & Gas Automation, • Reliability Solutions & Services, • Pressure Management, • Specialty Pumps & Rotating Equipment, • Instrumentation, • Maintenance & Repair Services General Statement: Under the general supervision of the Houston Service Center Manager, and direct supervision of a field service supervisor, provides technical support and hands-on repair and diagnostic services on Motor operated valves (MOVs) Duties and Responsibilities: • Perform MOV refurbish activities including preventative and corrective maintenance, actuator regrease, electrical equipment removal/installation, valve position limit switch setup on Motor Operator Actuators (Emerson Electric Actuation, Limitorque, Rotork, etc.)., • Perform Troubleshooting as required to identify root cause of issue, to return actuator to proper operating condition., • Familiarity with pneumatic actuation and valves., • Document all incoming items for shop repair, • Survey, • Photo, • Enter job to open order log, • Maintain required safety, drug testing and background check credentials, • Performs teardown, inspection, and rebuilds of valves and actuation in field, • Performs diagnostics and troubleshooting of valves and instruments, • Dispatches to customer site as scheduled, • Perform onsite walk-downs to scope repair requirements and recommend repair options and benefits QUALIFICATIONS: Education/Knowledge: • High school diploma or equivalent. Experience/Skills: • Must have 3 years' experience in MOV refurbishment., • Must be able to meet customer requirements for onsite access: background and safety requirements. COMPETENCIES: • Strong mechanical and electrical aptitude, with the ability to interpret technical manuals., • Ability to safely use and maintain a large variety of tools and equipment., • Ability to read and implement repair procedures and processes., • Possesses knowledge of A/C electrical circuitry and wiring., • Ability to work independently or as a team member., • Ability to work with minimum supervision., • Ability to clearly communicate with supervision, team members, customers and salespeople., • Ability to follow instructions, procedures and repair processes, • Possesses basic computer skills. WORKING CONDITIONS/PHYSICAL DEMANDS • Must be able to wear maximum level of required Personal Protective Equipment (PPE) without restriction which may include but is not limited to: hardhat; safety glasses; fire resistant clothing; safety-toed footwear; hearing protection; respiratory protection, etc., • Ability to lift and/or move up to 50 pounds., • Must be able to walk and stand 8 hours per day., • Frequent climbing, kneeling, reaching, pushing, pulling, lifting, and grasping., • Hazards: Potential exposure to chemicals. Proximity to moving mechanical and mobile equipment., • Must be able to work outside in environmental conditions which at times include extreme heat or extreme cold., • Environmental Conditions: Exposure to chemical plant manufacturing facilities. Must work both outside and inside and often in inclement weather conditions. Frequent exposure to noise and vibration. Must be able to distinguish emergency and other alarms and respond according to prescribed procedures.

Job DescriptionLogicool Air Solutions is seeking a T2 / T3 HVAC Service Technician—a dependable, coachable, and technically capable professional who can diagnose and repair residential and light commercial HVAC systems, communicate clearly with customers, and continue developing into a higher-level technician within a strong performance-driven company. This position is designed for technicians who already have real field experience, can work independently on many common service calls, and want to sharpen both their technical ability and customer communication inside a company with high standards, strong systems, and real growth opportunity. If you are hungry, accountable, and serious about becoming a stronger technician and higher earner, keep reading. Compensation: This position is designed for technicians who want a strong long-term opportunity with substantial upside. • Estimated yearly earnings: $75,000 to $115,000+., • Competitive base pay plus performance-based earning opportunity., • Overtime opportunities during peak demand., • No capped earning limit — performance dictates earnings., • Real advancement opportunity into higher-level technician roles. Final compensation will depend on production, technical ability, communication, efficiency, and overall field performance. What Makes This a T2 / T3 Role: As a T2 / T3 HVAC Service Technician, you must be able to: • Diagnose and repair a wide range of common residential HVAC issues with limited supervision., • Perform maintenance, service, and repairs on residential and light commercial systems., • Communicate clearly and professionally with customers about system issues and repair recommendations., • Identify when a repair issue is larger than a single failed part and escalate appropriately when needed., • Present repair and accessory options clearly and ethically., • Follow company processes for documentation, communication, collection, and job completion., • Continue growing technically, operationally, and professionally toward higher-level performance. You do not need to be a fully developed T4-level selling technician for this role, but you must already have enough experience to contribute meaningfully in the field and continue growing fast. Daily Expectations & Workload: This role requires consistency, discipline, and strong habits. You must be able to consistently: • Run service and maintenance calls efficiently and professionally., • Diagnose many common system issues without excessive hand-holding., • Complete , notes, potos, estimates, and payment steps correctly., • Present recommended repairs and value-add solutions when appropriate., • Maintain a professional customer experience on every call., • Work within dispatch discipline and job-completion standards. At Logicool, technicians are expected to help improve service results through stronger execution, clearer option presentation, better documentation, and more complete closeout of each job. Key Responsibilities: • Diagnose, service, and repair residential and light commercial HVAC systems., • Perform preventive maintenance and identify repair opportunities., • Troubleshoot electrical, airflow, refrigerant, drainage, and mechanical issues within your capability level., • Communicate clearly with homeowners and business owners about system condition and repair needs., • Present repair options in a clear, ethical, and professional way, • Recommend appropriate accessories, upgrades, and protection items when relevant., • Identify replacement opportunities and escalate or hand off appropriately when needed., • Complete all required job notes, photos, forms, estimates, and payment steps accurately., • Follow Logicool service, safety, communication, and documentation standards., • Maintain a clean truck, professional appearance, and organized workflow., • Protect the customer experience and contribute to 5-star review generation. Minimum Requirements: • 2+ years of HVAC service experience for T2-level consideration., • 3+ years of HVAC service experience for stronger T3-level consideration., • EPA Certification., • Residential diagnostic and repair experience., • Light commercial experience preferred., • Strong customer communication skills., • Valid driver’s license., • Clean background., • Drug-free., • Professional appearance and mindset. What We’re Looking For: • A technician who already knows the basics and wants to become more advanced., • Someone willing to sharpen diagnostics, communication, and overall professionalism., • A person who can speak confidently with customers instead of hiding behind the tools., • Someone who wants structure, standards, and support., • A technician who takes pride in doing the job right, not just finishing fast., • Someone coachable, accountable, and willing to grow inside a high-performance company. Why Logicool Air Solutions: Logicool Air Solutions is a highly rated HVAC company built on: • Technical excellence., • Strong systems and processes., • High accountability., • Long-term customer trust., • Real growth opportunity for strong performers. We are building a company where technicians are expected to grow, produce, communicate well, and operate with accountability. We do not want technicians who just show up, run calls carelessly, and leave paperwork incomplete. We want professionals who can solve problems, serve customers well, and continue leveling up their skill and earning power. Growth Opportunity: This role is ideal for a technician who wants to move up. A strong T2 / T3 technician at Logicool can continue advancing in: • Diagnostic ability., • Repair communication., • Accessory and upgrade presentation., • Customer trust and professionalism., • Leadership and field independence., • Long-term earning potential. Location: Based in Corpus Christi, Texas, serving the surrounding areas. Coastal living, strong demand, and year-round HVAC work. This Role Is NOT For: • Entry-level helpers with little to no field experience., • Techs who cannot communicate well with customers., • Techs who refuse to present repairs or recommendations., • People who need constant supervision on routine service work., • Anyone who is disorganized, sloppy with paperwork, or inconsistent in the field. This Role IS For: • Strong mid-level technicians., • Problem-solvers., • Professionals who want to keep growing., • Techs who want to be paid more as their performance improves., • Individuals who want long-term opportunity, not just another job.

Job DescriptionDescription: Air Specialty and Equipment is one of the largest air compressor distributors in Texas. We are seeking an experienced individual, who has worked in an industrial or manufacturing environment, to fill the position of Field Service Technician for the Corpus Christi, TX area. Responsibilities for the role include, but are not limited to, troubleshooting, maintaining, repairing and installing Air Compressors and Rotating Equipment while also gaining knowledge and experience with industrial air compressors and other compressed air equipment. You will also be responsible for the up-keep of all company trucks, and communicate with the Technical Department regularly to find solutions. • Inspect, troubleshoot, diagnose and maintain rotary screw/ reciprocating air compressors and various types of air dryers, • Perform diagnostics and determine causes for failures on air compressor systems equipment, • Perform routine preventative maintenance such as oil changes, cleaning and setting of factory standard controls. Provide equipment/system recommendations to improve reliability and/or performance, • Consult with and advise customers on compressed air equipment needs, maintenance, and repairs, • Document all service checklist and associated forms, • Strong respect for safety practices and demonstrates the use of necessary PPE and other safety devices, • Clean jobsite to a degree that it is in better condition than when arriving on site Candidate must have a valid driver’s license with a good driving record. Pre-employment drug screening and background check is required. Requirements: • 4-5+ years field service experience required, • Previous compressed air experience required, • Valid driver's license, • Strong mechanical and electrical background, • Experience servicing, troubleshooting, diagnosing, repairing commercial and industrial compressors and dryers desired, • Strong written and verbal communication skills, • Has own tools necessary to complete job (basic hand tools, multi-meter, thermal gun), • Consistent attendance

Job DescriptionDescription: ECI Group is seeking a dynamic, customer-centric Service Technician to join our growing team! The Service Technician is a critical member of our onsite community team, performing maintenance and service work that ensures our properties meet our standards of operational excellence and uphold our company values. Our Service Technicians take pride in knowing that they provide excellent service to our residents and ensure their comfort and safety needs are upheld at the highest standard. About Us ECI Group has been building communities and enriching lives for over 50 years by developing, building, investing in, and operating multifamily housing throughout the Southeast. While ECI is proud of its history, we are even more excited about our future. We are privately owned and fully integrated – developing, constructing, and managing our properties. ECI Group owns and operates approximately 7,000 + units, with more communities in active development. At ECI, we are guided by our core values, the heart of which is working as One Team, Better Together. What’s In It For You? In addition to competitive pay, ECI’s robust benefits package includes: • Bonus potential, • 30% rental discount at ECI properties, • Paid time off and company holidays, • 401k plus 4% company match, • Wellness plans, flexible spending accounts, and dependent care, • Participation in professional development programming, including a designated Mentor from day one What You’ll Do • Handle resident service requests via online ticketing system on a timely basis while providing fantastic customer service., • Perform or assist in all phases of apartment and property maintenance including make-readies, walking vacant units, groundskeeping, punch-out work, trash-out, maintaining the swimming pool and golf carts, and interior and exterior repairs., • Assist in the upkeep of the exterior and interior of the property., • Assist the Service Manager with health and safety issues by identifying and reporting potential hazards, liability and safety concerns, and unresolved maintenance issues., • Assist with efforts to prevent, mitigate and repair damage from severe weather events., • Familiarity with maintenance tools and equipment and ability to operate them in a safe manner., • Maintain compliance with company policies, ADA, OSHA and other regulations affecting the maintenance of the property. Requirements: What You’ll Need • High school diploma or GED along with a valid driver’s license., • A minimum of 2 years of general maintenance experience in multi-unit property management., • Working knowledge of HVAC, plumbing, electrical, fire protection and energy management systems., • Work as scheduled, including weekend and on-call shifts as needed., • Ability and willingness to work overtime if needed. What’ll Set You Apart • EPA certification Type I or II as well as other certifications/licenses as required by local, state or other regulations., • Basic knowledge of Microsoft Office Suite, Internet, Yardi, and other relevant applications. Physical Activities and Work Environment • Requires frequent lifting and moving of objects up to 75 pounds., • Requires frequent bending and/or stooping, and use of ladders or stepladders, to perform essential maintenance tasks., • May require regularly climbing stairs to access upper floor apartments., • Requires frequently working outside in various weather conditions. ECI Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Optimum RV is a premier RV dealership committed to providing quality service and a wide selection of recreational vehicles. We are looking for a skilled and dedicated RV Service Technician to join our service team and ensure our customers' RVs are maintained and repaired to the highest standards. Hourly pay relative to level of work experience; available weekly production bonuses, add an additional 20% to total weeks pay. Dealership Location: 4460 US-77 Business, Robstown, TX 78380 Responsibilities: Service Technicians are responsible for diagnosing, repairing, and performing maintenance on a variety of recreational vehicles. The primary duties will include: • Performing inspections, diagnostics, repairs, and maintenance on RV systems, including electrical, plumbing, HVAC, and structural components., • Troubleshooting and resolving complex technical issues in a timely and efficient manner., • Conducting pre-delivery inspections (PDIs) to ensure RVs meet quality and safety standards before delivery to customers., • Documenting all work performed, including parts used and labor time, in the dealership's service management system., • Communicating with service advisors and customers to provide detailed explanations of repairs and maintenance work., • Keeping up-to-date with industry standards, manufacturer guidelines, and technical bulletins., • Maintaining a clean and organized work area and ensuring tools and equipment are in good working condition., • Adhering to all safety protocols and company policies., • All other responsibilities as assigned., • Willing to learn all aspects of RV repair including house repairs, • Current certification (RVIA/RVDA/RVTI) OR interest in completing online training courses for RVIA certification, • *Paid on-the-job RVTI Technician Certification Training* Requirements Minimum Qualifications: • Strong knowledge of RV systems, including electrical, plumbing, HVAC, and mechanical components., • Ability to read and interpret technical manuals, diagrams, and schematics., • Excellent problem-solving skills and attention to detail., • Strong communication skills and the ability to explain technical information to non-technical customers., • Ability to work independently and as part of a team., • High school diploma or equivalent; RV experience preferred., • Valid driver's license with a clean driving record., • RVIA/RVDA certification or other relevant industry certifications (preferred), • Experience with computerized diagnostic tools and software (preferred)., • Familiarity with warranty repair processes and documentation (preferred). Essential Characteristics: • Customer Focused: We listen, solve problems, and stay focused on our mission., • Humble: We stay coachable and always learning, confident in our skills but never arrogant., • Reliable: We keep our word to our team and our customers--doing what we say every time., • Relentless Drive: We have a strong work ethic, sense of urgency, and never settle in the pursuit of our mission. Optimum RV LLC complies with all federal, state, and local laws prohibiting employment discrimination of any kind. Optimum RV LLC is an at-will employer and can terminate its employment relationship at any time, with or without cause, and without notice. Benefits • Competitive wages, • 401K, • Medical insurance, • Dental insurance, • Vision Insurance, • Company-Paid Life insurance, • Supplemental Life Insurance, • Short- & Long-Term Disability, • Critical Illness, Accident and Hospital Indemnity coverage, • EAP, • Wellness Program including Gym Reimbursement, • Vacation, Personal Time & Holiday pay

Job Description Heavy-Duty Scale Technician P&S Scale Company, a Precision Point Metrics company Location: Corpus Christi, TX (Field-Based) Job Type: Full-Time About P&S Scale Company P&S Scale Company is a leading provider of industrial weighing solutions throughout Texas, specializing in the sales, installation, calibration, repair, and maintenance of truck scales, industrial scales, and custom weighing systems. For decades, we have helped customers across transportation, aggregates, agriculture, manufacturing, oil & gas, recycling, food processing, marine, and logistics industries keep their operations running accurately and efficiently. Our reputation is built on quality workmanship, responsive service, and long-term customer relationships. We are looking for a dependable, mechanically inclined Heavy- Duty Scale Technician to join our Corpus Christi team. If you enjoy troubleshooting equipment, working outdoors, traveling to customer sites, and providing exceptional service, we’d like to meet you. Position Summary As a Heavy-Duty Scale Technician, you will install, inspect, calibrate, troubleshoot, repair, and maintain truck scales and industrial weighing equipment at customer locations throughout South Texas, including the Corpus Christi coastal region. This field-based position combines mechanical, electrical, hydraulic, electronic, and customer service skills while working independently at a variety of industrial facilities. You will support customers across industries including transportation, ports, energy, agriculture, manufacturing, construction, and logistics. You’ll serve as the face of P&S Scale Company, ensuring customers receive accurate, reliable weighing systems that meet regulatory requirements and performance expectations.Key Responsibilities • Install, calibrate, inspect, maintain, and repair truck scales, axle scales, floor scales, and industrial weighing systems. • Diagnose and troubleshoot mechanical, electrical, hydraulic, electronic, and software-related issues. • Perform preventative maintenance to maximize equipment reliability and minimize customer downtime. • Conduct calibrations using certified test weights and specialized testing equipment. • Ensure weighing systems comply with NIST Handbook 44 and all applicable industry standards. • Complete accurate service reports, calibration certificates, inspection reports, and maintenance documentation. • Communicate technical findings, repair recommendations, and project updates with customers. • Safely operate company vehicles, forklifts, skid steers, cranes, lifting devices, and other job-site equipment. • Maintain company tools, equipment, and service vehicle in safe working condition., • Follow OSHA, DOT, and company safety policies at all times., • Travel throughout South Texas, including the Corpus Christi, Coastal Bend, and surrounding areas for service calls, installations, and emergency repairs. • Participate in occasional after-hours, weekend, or emergency service calls as needed. Qualifications Required • Strong mechanical aptitude with excellent troubleshooting and problem-solving skills. • Ability to work independently while managing multiple service calls and priorities., • Strong attention to detail and commitment to quality workmanship., • Excellent communication and customer service skills., • Valid Texas driver’s license with a clean driving record.• Current CDL (Class A or B with Air Brake Endorsement), or willingness and ability to obtain one. • Ability to lift, push, or pull up to 100 pounds., • Comfortable working outdoors in varying weather conditions, including Texas heat, and in industrial environments. • Willingness to travel throughout South Texas with occasional overnight stays., • Basic computer skills for completing digital service reports and documentation. Preferred Qualifications • Experience servicing industrial scales or commercial weighing equipment., • Industrial maintenance, electrical, hydraulic, mechanical, or field service experience. • Knowledge of NIST Handbook 44 and commercial weighing regulations., • Experience operating forklifts, skid steers, cranes, boom lifts, or other heavy equipment. • Welding, fabrication, or industrial electrical experience., • Experience reading electrical schematics and mechanical drawings. Compensation & Benefits • Competitive pay based on experience, • Weekly pay, • Company vehicle provided, • Company tools, equipment, and uniforms, • Health, dental, and vision insurance, • 401(k) with company match, • Paid vacation and company holidays, • Ongoing technical training and professional development, • Opportunities for advancement within a growing organization, • Stable, year-round employment Work Environment This is a field-based position requiring travel throughout South Texas. Work is performed at customer facilities including manufacturing plants, trucking terminals, port and marine operations, aggregate facilities, agricultural operations, warehouses, recycling centers, oil & gas sites, and construction locations. The ideal candidate enjoys hands-on technical work, solving complex equipment issues, and building strong relationships with customers while representing P&S Scale Company with professionalism and integrity. #LI-CL1

Job Description Job Type: Full-time Job Location: Corpus Christi, TX Pay: $25.00 - $35.00 per hour based on experience Supplemental Pay: • Overtime pay, • Performance bonus Schedule: • Extended hours, • Monday to Friday, • On call ACT Power Services was created to provide industry leading services for our clients. As an independent service provider, we avoid conflicts of interest and maintain a complete focus on our clients' needs. We have taken a no-frills approach to developing our organization to ensure our clients are only paying for services that add value. ACT then leverages a world-class team, state of the art technology, and best-in-class operating practices to ensure every facility is operated in a manner that maximizes production, preserves compliance, and ensures the safety of our personnel and communities. Our vision is to reshape the industry's benchmark for renewable operations and create the next generation of O&M provider. The Field Service Technician is and entry-level position responsible for the safe, productive repairs and maintenance of Commercial and Utility Scale Solar PV plants. From performing preventative maintenance and inspections, to troubleshooting and making repairs to maximize production, the Solar Maintenance Technician gets to exercise a verity of skill sets and has constant opportunities to learn more. All while making an impact on our safe, reliable, clean energy future. This role will encompass performing the preventative and corrective maintenance on the solar modules, strings, trackers, and inverters. Responsibilities • Uphold a high level of safety standards in everything that you do, • Conducting routine preventive maintenance, service, troubleshooting and repair of solar photovoltaic facilities, • Willingness to learn the NEC code, electrical theory, and industry best practices, • DC and AC testing included but not limited to polarity, open circuit voltage, grounding continuity, communication, insulation resistance testing, I-V curve tracing, • Interpret schematics to understand system layouts and connections, • Maintain a schedule for routine maintenance, service, trouble shooting and repair of equipment at solar photovoltaic facilities including but not limited to: Single Axis trackers, Central or String Inverters, Transformers, AC and DC disconnects, Substation equipment, • Maintaining company property such as vehicle, tools, meters and plant stock, • Maintaining service reports, inspection documentation, safety paperwork, and spare parts inventory, • Provide maintenance and troubleshooting training to technicians and others as needed, • Identify safety hazards and take appropriate action to remove or eliminate hazards Qualification Requirements • Familiarity with electrical systems and components, • Proficiency in using power tools for repair tasks, • Ability to read and interpret schematics accurately, • Proficiency with MS Office suite, • Ability to take direction and complete tasks with minimal oversight, • Valid Driver's License, • Working knowledge and experience operating under OSHA 1910, NFPA 70E, and 70B, • OSHA 10 General Industry certificate, • Must have the ability to travel, work on-call during off-shift hours and weekends Physical Requirements/Work Environment: • Work is to be performed outdoors at various job sites., • Must be able to comply with all safety standards and procedures. PPE personal protective equipment is required., • Must have the ability to sit, stoop, kneel, bend, stand, or walk for 8-10 hours a day., • Must be able to lift, push, or pull up to 50 pounds on an occasional basis Benefits: • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft, • Company vehicle opportunities, • Pet Insurance Act Power Services does not accept any unsolicited resumes or referrals from any third-party recruiting firms or agencies.

Job Description Senior Compressor Systems Service Technician Corpus Christi, TX $32.00 - $38.00/hr A leading provider of industrial solutions is seeking an experienced Senior Compressor Systems Service Technician to join our team in Corpus Christi, TX. As a key member of our field service team, you will be responsible for providing on-site repair, maintenance, and troubleshooting services for a variety of compressed air equipment. Responsibilities: • Perform mechanical and electrical repairs, maintenance, surveys, and commissioning of compressed air equipment., • Diagnose and resolve complex technical issues reported by customers., • Conduct courtesy calls to customer sites on days without scheduled service jobs., • Collaborate with Account Managers and management to increase service and aftermarket revenue., • Travel to assist other Technicians as needed., • Represent the company professionally and provide excellent customer service., • Work independently with minimal supervision, demonstrating strong problem-solving and decision-making skills. Specific tasks include: • Removing, rebuilding, and replacing valves., • Removing and replacing pipe spools., • Performing electrical tests using a voltmeter., • Programming and troubleshooting microprocessor and PLC-based equipment controls., • Climbing and working on scaffolding., • Completing daily reports using a computer., • Dumping and loading air dryer desiccant. Additional Tasks: • Learn and be able to start up and troubleshoot company-supplied packages., • Be a technical resource to customers over the phone., • Although the vast majority of jobs are on-site at the customer, be able to set up and perform some repairs/rebuilds in-house. Qualifications: • High school diploma or equivalent., • 4+ years of proven experience in repairing and maintaining compressed air equipment, with a focus on desiccant dryers, rotary screw compressors, and centrifugal compressors., • Strong mechanical and electrical aptitude., • Excellent problem-solving and troubleshooting skills., • Ability to work independently and as part of a team., • Excellent communication and customer service skills., • Willingness to travel and work flexible hours., • Valid driver's license with a clean driving record. Benefits: • Competitive compensation ranging from $32.00 - $38.00/hr, based on experience., • Eligibility for overtime pay., • Comprehensive benefits package including health, dental, and vision insurance., • Mileage reimbursement., • 401k with a 3% employer match., • Paid vacation and holidays., • Opportunities for growth and development within the company. Note: Candidates will work from a company-provided service truck and must be able to live in or relocate to the Corpus Christi, TX area.

Kellermeyer Bergensons Services (KBS) has immediate full-time, permanent openings for a Project Supervisor. If you enjoy working in a fast-paced environment and helping make an impact on safety in the workplace, then this is the job for you! About KBS Kellermeyer Bergensons Services (KBS) is the largest privately held provider of facility services in North America, servicing over 2 billion square feet of space daily. We help industry leaders across a wide range of key verticals—including retail, industrial and logistics, healthcare, education, manufacturing, and more—maintain clean, efficient and welcoming spaces that support their operations. As we continue to grow, we’re looking for team members who are dedicated, reliable, and ready to contribute to a culture built on respect, opportunity, and pride in service. What are you waiting for? APPLY TODAY and join the KBS Crew! Starting Pay: $20.0 per hour Shifts Available: ENTER HERE As a Project Supervisor, the following duties and responsibilities will be a part of this opportunity but are not limited to them: • Leads crew and performs janitorial project work at multiple locations within a defined geographic area. Work requires efficient execution of work within defined project time frames., • May support staffing coordination for projects including communicating schedules., • Floor surfaces and carpet cleaning, • Carpet extractions, • Wash windows, • Minor wall repair, • Gather and empty trash., • Service, cleaning, and supply restrooms, • Clean and polish furniture and fixtures, • Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees., • Dust furniture, walls, machines, and equipment., • Move furniture, equipment, and supplies, either manually or by using hand trucks Safety, • Follows all procedures for the use of chemical cleaners and power equipment., • Monitors building security and safety by performing such tasks as locking doors after operating hours and checking electrical appliance use to ensure that hazards are not created., • Follows all procedures for the use of chemical cleaners and power equipment. Requirements: • Excellent understanding of janitorial/building maintenance procedures and related safety requirements, • Tool and machine maintenance including basic break/fix procedures., • How to meet general customer expectations, • Effective verbal and written communication skills including time management with an ability to prioritize and set clear expectations., • Ability to resolve requests and concerns in a fast-paced environment., • Ability to manage work with and lead a team in a complex task oriented janitorial operations environment, • Ability to provide facilities escalations resolution timely and efficiently, • Ability to track supplies and task/performance data, document and submit reports/supply orders. Answer calls, monitor, track and document escalations in what may be a fast-paced environment with a focus on customer service, • Relationship management and ability to build rapport with customers, • Communicate (speak and write) in English (and where needed bilingual in Spanish and English, • KBS utilizes the KBSPresence mobile timekeeping software for accurate recording of employee work hours, attendance management, completion of required training, and distribution of important employment-related information. All non-exempt employees are required to download and use the KBSPresence app on their personal mobile devices to clock in and out for their shifts and breaks. In accordance with applicable local laws, cell phone reimbursement is provided to support the use of personal devices for work-related tasks. What's In It For You? As a full-time KBS employee (30+ hours per week) you qualify for benefits including medical, prescription drugs, dental, vision and more! • Affordable Limited Medical Insurance (Coterie) which includes virtual access to US board-certified physicians who can consult, diagnose, and prescribe medications via interactive audio or video., • Life Insurance, • Short Term Disability – Employer paid., • Long Term Disability, • Supplemental Health Insurance (E.G., Accident), • 401k plan with a match or Non-qualified Deferred Compensation Plan, • Pet Insurance, • PerkSpot Discount Program – discounts on travel, gyms, cell phones, restaurants, auto, apparel & electronics KBS considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity, and expression, marital or military status, or based on an individual's status in any group or class protected by applicable federal, state, or local law. KBS also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.