Trabajos welder en Phoenix, ArizonaCrear alertas

Job Description Laborer About Us: Fire Training Structures has been a leading-edge manufacturer of quality fire training simulators both domestically and internationally. As we continue to expand, we are looking for an experienced Welder to join our dedicated team, where communication and teamwork thrive. Responsibilities: • Assist with general labor tasks throughout yard, shop, and operational areas., • Load, unload, move, organize, and clean materials, equipment, containers, and operational workspaces., • Assist with basic repairs, maintenance, fabrication, and operational support activities as assigned., • Operate hand tools, power tools, and basic equipment safely and properly., • Maintain clean and organized work areas, yards, shops, and operational spaces., • Support drivers, fabrication personnel, shop staff, and operations personnel as needed., • Follow company safety procedures and operational standards., • Assist with inventory movement, material handling, and equipment staging., • Report operational, maintenance, or safety concerns to management., • Ability to maintain confidentiality and professionalism, • Perform additional duties requested by upper management. Physical Requirements: • Frequent standing, walking, bending, kneeling, climbing, lifting, and physical movement throughout shift, • Ability to lift and move up to 75 lbs., • Ability to work indoors and outdoors in varying weather conditions, • Exposure to operational yards, shops, equipment, tools, machinery, and loud environments Qualifications: • High school diploma or equivalent preferred, • Previous labor, construction, warehouse, yard, or operational experience preferred, • Ability to operate basic tools and equipment preferred, • Ability to follow safety procedures and operational instructions required, • Forklift experience or certification preferred, • Valid driver’s license preferred Benefits: • PTO eligibility, • Holidays off, • Medical, dental, vision, and life insurance, • 401(k), • Health Savings Account Job Type: Full-time, Onsite. Not a Remote Position Main Office/Yard Location: 1005 N 50th St Phoenix, AZ 85008 Equal Opportunity Employer: Fire Training Structures, LLC is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to providing equal employment opportunities to all employees and applicants.

Job DescriptionSalary: $25-$29 DOE An "NAP Operator" (Numerical Automatic Programmer) is a role focused on CNC (Computer Numerical Control) machine operation and programming. In Arizona's fabrication industry, this position bridges the gap between mechanical engineering drawings and the physical machining of raw materials, specifically for metal, pipe, or sheet metal parts. Core Responsibilities • MachineSetup & Operation: Calibrate and safely operate heavy fabrication machinery like CNC press brakes, lasers, and waterjets., • Programming & Editing: Input and adjust CNC data, select appropriate tooling, and translate blueprints or mechanical engineering drawings into usable machine programs., • Quality Control: Measure and inspect finished parts using calipers, micrometers, and tape measures to ensure they meet strict dimensional tolerances., • Maintenance & Safety: Perform routine operator-level machine maintenance, troubleshoot minor equipment issues, and adhere strictly to all OSHA-compliant safety standards. Key Qualifications • Experience: Typically requires 1 to 3 years of hands-on experience in a metalworking or manufacturing environment., • Math & Blueprint Reading: Strong shop math skills (fractions, decimals) and the ability to read and interpret mechanical drawings., • Physical Requirements: Must be able to lift up to 5070 pounds, stand for long periods, and comfortably work in non-climate-controlled environments typical of Arizona summers.

Job Description Sheet Metal Welder/Fabricator Goodyear, AZ Schedule: Monday to Friday 6:00 AM to 2:00 PM with overtime required throughout the week and occasionally on Saturday's based on business needs. Are you passionate about metalworking and eager to start a rewarding career? We’re looking for dedicated individuals to become our next Sheet Metal Fabricators in Goodyear, AZ. Our client offers comprehensive training on its equipment and processes for experienced fabricators. Play a vital part in crafting high-quality stainless steel components and grow your skills in a collaborative, supportive environment. Responsibilities of the Sheet Metal Welder/Fabricator: • Read and interpret blueprints, schematics, and technical drawings to accurately measure, cut, and shape stainless steel parts, • Use hand tools and measuring instruments like calipers, tape measures, and squares to ensure precise fabrication, • Operate power tools such as grinders, drills, and shears to complete detailed metalwork, • Work with press brake machinery to bend and form stainless steel components with accuracy, • Utilize TIG welding techniques to join stainless steel parts, ensuring strong, high-quality welds, • Assemble sheet metal components for welding and finishing processes, • Inspect finished products for quality, accuracy, and adherence to specifications, • Manage raw materials efficiently while maintaining an organized workspace, • Collaborate closely with team members, including fabricators, welders, and project managers to ensure smooth project flow Requirements of the Sheet Metal Welder/Fabricator: • 1-2 years of experience in sheet metal detailing or fabrication, particularly with stainless steel, • Experience with press brake bending and forming stainless steel is preferred, • Proficiency with TIG welding stainless steel, • Strong basic math skills for precise measurements and layouts, • Comfortable using hand tools and measuring instruments, • Knowledge of cutting, bending, and forming metal fabrication techniques, • Exceptional attention to detail and ability to work within tight tolerances, • Strong organizational skills and a commitment to quality, • Physical ability to lift up to 50 pounds, stand for extended periods, and handle intricate tasks with manual dexterity, • High school diploma or equivalent Compensation for the Sheet Metal Welder/Fabricator: • Temp: $23/hour, • Upon Hire: Rates increase to $24.00 per hour for fabrication/finishing roles and to $25.50 per hour upon successful completion of onboarding and conversion to full-time status. In addition, employees receive a $0.25 raise every 30 days for the first three months, with projected first-year earnings ranging from approximately $24.74 to $26.25 per hour.Company DescriptionMasis Staffing ensures peak service to its clients through our culture, experience, and ethics. We are a family-oriented, service-driven staffing firm with a sincere and responsible team dedicated to delivering custom solutions for all our client hiring needs. Our associates are the heart of every client solution and are a key asset to the continued development of our partnerships. Masis is known for the great care we take with employees and clients alike! Masis Staffing is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.Masis Staffing ensures peak service to its clients through our culture, experience, and ethics. We are a family-oriented, service-driven staffing firm with a sincere and responsible team dedicated to delivering custom solutions for all our client hiring needs. Our associates are the heart of every client solution and are a key asset to the continued development of our partnerships. Masis is known for the great care we take with employees and clients alike!\r\nMasis Staffing is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionABOUT US At Okland, we exist to create remarkable experiences — not just through the projects we deliver, but in the way we show up for our clients, partners, and each other every day. We believe that how we build is just as important as what we build, and our purpose is rooted in people. Whether it's a trusted partner we’ve worked with for decades or a new team member stepping onto their first jobsite, we approach every relationship with care, clarity, and commitment. We’re a commercial general contractor and construction management company with more than 1,200 team members and a track record of delivering some of the most complex and high-profile projects in the country — from semiconductor and healthcare facilities to professional sports venues and high-end hospitality. Founded in 1918 in Salt Lake City, we’ve grown steadily for over a century — now with offices in Utah, Arizona, and Idaho — and we’re entering one of the most exciting chapters in our company’s history. We’re building more than projects. We’re building careers, capabilities, and momentum for the future. And we’re looking for passionate, driven people who want to be part of it. ABOUT THIS OPPORTUNITY The Certified Welding Inspector (CWI) Quality Control Manager is responsible for developing, implementing, and leading welding and fabrication quality control programs to ensure compliance with project specifications, industry standards, and regulatory requirements. This role oversees quality assurance processes, inspections, documentation, and close coordination with project teams, fabricators, and clients to ensure the highest standards of workmanship, safety, and project execution are maintained. This position also serves as a mentor, coach, and technical resource for quality personnel, supervisors, and craft employees, helping build a culture of continuous improvement, accountability, and quality excellence. The ideal candidate brings strong technical expertise in welding inspection, process piping, semiconductor construction, and quality systems, along with the leadership skills to guide teams and support successful project delivery. YOUR DAY-TO-DAYQuality Program Leadership • Develop, implement, and maintain project-specific Quality Control (QC) and Quality Assurance (QA) programs supporting semiconductor manufacturing facilities, including process piping, utility systems, skids, tool hook-ups, cleanroom infrastructure, and modular fabrication activities., • Ensure compliance with applicable industry codes, standards, and client requirements, including ASME B31.3, ASME Section IX, AWS, SEMI standards, ISO requirements, manufacturer specifications, and project-specific quality plans., • Lead quality initiatives that promote accountability, continuous improvement, and right-first-time execution across fabrication and field installation activities.Inspection, Verification & Compliance, • Oversee inspection and verification activities for high-purity and ultra-high-purity (UHP) process systems, including stainless steel orbital welding, tubing installation, skid fabrication, cleanroom construction, and thermoplastic piping systems such as PVDF, PFA, PP, PVC, CPVC, and HDPE., • Develop and oversee quality control processes for thermoplastic piping systems, including butt fusion, socket fusion, infrared (IR) fusion, bead and crevice-free (BCF) fusion, and other manufacturer-approved joining methods., • Conduct inspections of welding, fusion, fabrication, and installation activities, including weld preparation, alignment verification, fusion parameter validation, visual inspections, dimensional verification, and workmanship assessments., • Monitor fabrication and installation activities to ensure adherence to approved procedures, engineering specifications, cleanliness protocols, contamination control requirements, and client quality standards.Documentation & Quality Records, • Review and approve Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), Welder Performance Qualifications (WPQ), orbital welding qualifications, fusion operator qualifications, and associated quality documentation., • Verify compliance with material traceability requirements, including receiving inspections, heat number verification, Material Test Report (MTR) review, Positive Material Identification (PMI) where applicable, and traceability documentation for thermoplastic piping materials and components., • Maintain complete and accurate quality records, turnover packages, inspection reports, weld logs, fusion logs, test records, material traceability documentation, and commissioning documentation to support client acceptance and system handover., • Review fusion machine calibration records, welding equipment certifications, inspection reports, and testing documentation to verify compliance with approved procedures and manufacturer requirements.Testing, Turnover & Audits, • Coordinate and oversee Non-Destructive Examination (NDE), boroscope inspections, weld mapping, passivation verification, pressure testing, leak testing, flushing, cleaning verification, and system turnover inspections., • Monitor fabrication and installation of UHP, chemical distribution, process waste, acid waste, solvent waste, industrial utility, and specialty process piping systems to ensure compliance with project specifications and semiconductor industry requirements., • Serve as the primary quality liaison during customer audits, supplier audits, regulatory inspections, and client quality reviews.Collaboration & Continuous Improvement, • Lead the identification, documentation, investigation, and resolution of non-conformances, corrective actions, preventive actions, and continuous improvement initiatives., • Collaborate closely with Project Executives, Project Directors, Superintendents, Shop Superintendents, Fabrication Managers, Engineers, Safety Managers, and client quality representatives to proactively resolve quality issues and maintain project schedules., • Participate in constructability reviews, project planning sessions, risk assessments, fabrication strategy meetings, and lessons-learned reviews to ensure quality requirements are integrated throughout project execution.YOU’RE READY FOR THIS ROLE IF YOU HAVE, • Current AWS Certified Welding Inspector (CWI) certification required., • Bachelor’s degree in Engineering, Construction Management, Welding Engineering, Welding Technology, Quality Management, or a related technical field preferred., • 7–10 years of quality control, quality assurance, welding inspection, fabrication, or construction experience supporting semiconductor, advanced manufacturing, pharmaceutical, data center, or industrial process facility projects., • Strong working knowledge of ASME B31.3 Process Piping, ASME Section IX, AWS D1.1, SEMI standards, client-specific quality requirements, and applicable industry regulations., • Experience inspecting stainless steel process piping systems, orbital welding operations, high-purity tubing installations, and thermoplastic piping systems including PVDF, PFA, PP, PVC, CPVC, and HDPE., • Knowledge of thermoplastic fusion processes, including butt fusion, socket fusion, infrared (IR) fusion, bead and crevice-free (BCF) fusion, and associated quality control requirements., • Experience reviewing and managing WPS, PQRs, WPQs, fusion operator qualifications, material traceability documentation, and turnover packages., • Familiarity with NDE methods including UT, RT, MT, PT, boroscope inspections, leak testing, and pressure testing requirements., • Strong understanding of material traceability, MTR review, PMI verification, contamination control practices, cleanroom protocols, and semiconductor quality documentation requirements., • Ability to read and interpret engineering drawings, P&IDs, isometric drawings, specifications, welding symbols, fusion documentation, and semiconductor construction documents., • Experience managing quality audits, client inspections, supplier evaluations, and commissioning or turnover activities for large-scale industrial or semiconductor projects., • Proven leadership experience with the ability to mentor, coach, and develop quality inspectors, welding inspectors, fusion technicians, foremen, and craft personnel., • Excellent communication, organizational, problem-solving, and interpersonal skills with the ability to effectively interact with clients, project teams, engineers, and field personnel., • Proficiency in Microsoft Office Suite, document control systems, quality management software, inspection reporting platforms, and electronic turnover documentation systems., • Ability to work in active fabrication facilities, cleanroom environments, and construction sites while maintaining compliance with all safety, quality, and contamination control requirements.PREFERRED QUALIFICATIONS, • Extensive experience developing, implementing, and managing quality programs for large-scale semiconductor manufacturing facilities, advanced technology campuses, pharmaceutical facilities, data centers, and other mission-critical industrial projects., • Proven experience supporting semiconductor construction projects involving UHP process systems, chemical distribution systems, specialty gas systems, cleanroom environments, process piping, modular skids, and tool installation activities., • Experience managing quality programs through all project phases, including fabrication, installation, testing, commissioning, turnover, and client acceptance., • Additional certifications such as AWS Senior Certified Welding Inspector (SCWI), ASNT Level II or III, Certified Quality Auditor (CQA), Certified Quality Engineer (CQE), NACE Coating Inspector, API certifications, or other industry-recognized quality credentials., • Experience leading quality teams across multiple fabrication shops, construction sites, cleanroom environments, and concurrent project scopes., • Strong background coordinating client audits, supplier quality assessments, mock audits, turnover package reviews, and regulatory compliance inspections., • Experience implementing continuous improvement initiatives, root cause analysis programs, lessons learned processes, and quality performance metrics in high-volume fabrication and installation environments., • Familiarity with semiconductor owner quality standards and project execution requirements for leading manufacturers such as TSMC, Intel, Samsung Electronics, Micron Technology, and other advanced technology clients., • Demonstrated ability to mentor and develop quality professionals, welding inspectors, fusion technicians, and field quality personnel while fostering a culture of quality excellence, accountability, and continuous improvement.WHAT WE OFFER, • Award-winning culture – consistently recognized by Best Places to Work in Arizona, Utah, and Idaho, • Competitive pay – weekly paychecks, salary, bonus incentives, and 401(k) with employer match, • Holistic benefits – Medical, Dental, Vision, Life, and Disability Insurance; paid parental leave, financial literacy resources, and an Employee Assistance Program including legal and mental health support, • Perks – tenure awards including pro sports tickets, fitness memberships, travel vouchers, and paid work anniversary sabbaticals, • Award-winning work – our projects are consistently honored with recognitions from AIA, ENR, AGC, and morePHYSICAL ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk, and/or hear. The employee is frequently required to use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch, and/or crawl. The employee must also occasionally lift and/or move up to 20 pounds. Specific vision abilities include close vision and color vision. The employee is also required to frequently inspect fabrication shops, cleanroom environments, and active construction projects and may be exposed to ongoing construction activity and various weather conditions. The noise level in the work environment may range from moderate to loud. EEO STATEMENT Okland is an equal opportunity employer and considers all applicants for employment based on merit, competence, performance, and business needs. We do not discriminate on the basis of any status protected under federal, state, or local law. Applicants will be considered regardless of their race, color, sex, gender identity or expression, age, religion, creed, national origin, citizenship status, sexual orientation, genetic information, physical or mental disability, military status, or any other characteristic protected under federal, state, or local law. In addition to complying with all applicable laws, Okland also has a strong corporate commitment to inclusion. VISA AND SPONSORSHIP Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B, O-1, CPT, OPT, etc.). Unless specifically stated in this job posting, we are unable to sponsor or take over sponsorship of an employment visa at this time.

Job Description Professional Placement Services is seeking an experienced Quality Inspector for our fabrication operation in Phoenix. This is a full-time, permanent, direct hire role with a competitive starting pay rate, benefits, and room for growth! Quality Inspection • Perform receiving, in-process, and final inspections of fabricated pipe spools and assemblies., • Verify dimensions, fit-up, weld preparation, and material identification., • Conduct visual weld inspections in accordance with applicable codes and customer requirements., • Verify proper use of approved drawings, specifications, and revisions., • Inspect completed assemblies prior to shipment. Documentation & Compliance • Review fabrication packages for completeness and accuracy., • Maintain inspection reports, weld maps, material traceability records, and turnover documentation., • Verify WPS (Welding Procedure Specifications) and welder qualifications are current and being followed., • Ensure compliance with ASME, AWS, API, and customer requirements., • Assist in preparing quality records for customer audits and project closeout packages. Material Control • Verify incoming materials match purchase orders, material test reports (MTRs), and project specifications., • Ensure proper material identification and traceability throughout fabrication., • Monitor segregation of carbon steel and stainless steel materials to prevent contamination. Process Improvement • Identify quality issues and recommend corrective actions., • Assist in root cause investigations and corrective action implementation., • Monitor recurring defects and communicate trends to management., • Support continuous improvement initiatives focused on reducing rework and improving productivity. Shop Floor Support • Work directly with fitters and welders to resolve quality concerns., • Provide guidance on drawing interpretation and code requirements., • Verify hold points and customer witness points are completed., • Support hydrotesting, pressure testing, and NDE coordination when required. Requirements • 2-3+ years of Quality Inspection experience with proven track record of pipe inspection

Job Description PPS is seeking an experienced TIG Welder for our pipe fabrication shop in Phoenix. This is a full-time, permanent, direct hire role with a highly competitive starting wage, benefits, and HUGE OT opportunities! Responsibilities: • Read blueprints, draw designs, and interpret requirements to meet customer specs., • Fast paced TIG welding pipe in all positions on a variety of materials Requirements: • Proven experience with TIG welding methods on stainless, sanitary, and process piping, • Must be able to work with a variety of materials and tools in all positions, • Work is outdoors/indoors all conditions, • MUST PASS TIG WELDING TEST!, • Candidate provides own torches, gloves, and hood

Job Description JOB TITLE: QA/QC- Process Piping/Mechanical SUMMARY: Quality Control inspection and associated documentation of Process Piping systems within a cleanroom environment. DUTIES AND RESPONSIBILITIES: • Coordinate compliance of OSHA, EPA, and other federal, state, and local regulatory Responsible for inspecting all fabricated and installed piping, mechanical equipment, skids, modular systems, and components per project specifications., • Review and approval of Quality Plans, ITPs, PQR, WPS, WPQ, inspection procedures, records for installed pipe., • Inspections of mechanical assemblies and sub-assemblies for alignment and proper functioning, prepare reports and notify appropriate people of equipment problems and deficiencies, ensure compliance with codes and standard., • Responsible for ensuring that all the valves, tubing, fittings, instruments, and any components will be submitted and approved in accordance with the project drawings and specifications., • Retain records for NDE personnel qualifications / certifications to be submitted for approval and shall be available for review as necessary., • Responsible for verifying that all inspectors under the subcontractors for this project are qualified to perform the inspections they are tasked with in accordance with the project specifications., • Responsible for the initiation of any Surveillance Reports and Non-Conformance Reports and updating the Surveillance Reports and NCR log as a result of any adverse findings during any inspections or witnessed inspections., • Participation in turnover package documentation., • Perform periodic quality checks for all welding performed to ensure that the welding procedures submitted to the contractor are being followed., • Verify that all welders are certified to perform the work they are assigned in accordance with the project specifications and the welder qualification list., • Monitor the Subcontractors Welder Performance Qualification Record (WPQR) for welders reject rate and notify the Contractor of any trends or risks to the project. Requirements: • Complete understanding of semiconductor process systems including ultra-high purity and cleaned for oxygen service stainless steel systems, and the ability to competently inspect pipe/tube welds and systems, • Knowledge of systems must include all field and workshop fabrication/construction protocols and means and methods as outlined by industry standard specifications including systems testing and acceptance, • Experience and knowledge of processed piping systems, • Must be able to read P&ID (Piping and Instrumentation Diagrams), • CWI required, • Familiarity with B31.3 and ASME Section 9, • Computer skills required: MS Office, Bluebeam, PowerPoint COMPETENCIES: • Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Promotes a cooperative Safety Team environment culture of mutual support., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Occasionally (less than 1/3 of the job), • Frequently (1/3 to 2/3 of the job), • Continually (more than 2/3 of the job), • Frequently required to stand., • Frequently required to walk., • Frequently required to sit., • Frequently required to utilize hand and finger dexterity., • Occasionally required to climb, balance, bend, stoop, kneel or crawl., • Continually required to talk or hear., • Occasionally work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • While performing the duties of this job, the noise level in the work environment is usually moderate., • The employee must occasionally lift and /or move more than 20 pounds., • Specific vision abilities required by this job include Close vision; Distance vision; Peripheral vision; Depth perception and ability to adjust focus., • Must be able to wear personal protective equipment, including protective eye wear, hard hat, lab coat, gloves, steel-toed shoes, hearing protection, and respirators., • Must be able to safely access and traverse indoor and outdoor obstacles for site inspections, including climbing ladders, walking on stairs, catwalks, and other types of uneven surfaces where activity inspections are needed. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits • Health Care Plan (Medical, Dental & Vision), • 401K, • Life Insurance, • Flexible Spending Accounts (FSA), • Disability Insurance, • Paid Time Off, • Training & Development

Job Description JOB TITLE: QA/QC- Process Piping - CWI SUMMARY: Quality Control inspection and associated documentation of Process Piping systems within a cleanroom environment. DUTIES AND RESPONSIBILITIES: • Coordinate compliance of OSHA, EPA, and other federal, state, and local regulatory Responsible for inspecting all fabricated and installed piping, mechanical equipment, skids, modular systems, and components per project specifications., • Review and approval of Quality Plans, ITPs, PQR, WPS, WPQ, inspection procedures, records for installed pipe which would include weld map log, PMI, slope checks, and traceability logs, and other associated records of installed pipe. Inspections of mechanical assemblies and sub-assemblies for alignment and proper functioning, prepare reports and notify appropriate people of equipment problems and deficiencies, ensure compliance with codes and standard., • Responsible for ensuring that all the valves, tubing, fittings, instruments, and any components will be submitted and approved in accordance with the project drawings and specifications., • Retain records for NDE personnel qualifications / certifications to be submitted for approval and shall be available for review as necessary., • Responsible for verifying that all inspectors under the subcontractors for this project are qualified to perform the inspections they are tasked with in accordance with the project specifications., • Responsible for the initiation of any Surveillance Reports and Non-Conformance Reports and updating the Surveillance Reports and NCR log as a result of any adverse findings during any inspections or witnessed inspections., • Participation in turnover package documentation., • Perform periodic quality checks for all welding performed to ensure that the welding procedures submitted to the contractor are being followed., • Verify that all welders are certified to perform the work they are assigned in accordance with the project specifications and the welder qualification list., • Monitor the Subcontractors Welder Performance Qualification Record (WPQR) for welders reject rate and notify the Contractor of any trends or risks to the project. Requirements: • Complete understanding of semiconductor process systems including ultra-high purity and cleaned for oxygen service stainless steel systems, and the ability to competently inspect pipe/tube welds and systems, • Knowledge of systems must include all field and workshop fabrication/construction protocols and means and methods as outlined by industry standard specifications including systems testing and acceptance, • Experience and knowledge of processed piping systems, • Must be able to read P&ID (Piping and Instrumentation Diagrams), • CWI required, • Familiarity with B31.3 and ASME Section 9, • Computer skills required: MS Office, Bluebeam, PowerPoint COMPETENCIES: • Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Promotes a cooperative Safety Team environment culture of mutual support., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Occasionally (less than 1/3 of the job), • Frequently (1/3 to 2/3 of the job), • Continually (more than 2/3 of the job), • Frequently required to stand., • Frequently required to walk., • Frequently required to sit., • Frequently required to utilize hand and finger dexterity., • Occasionally required to climb, balance, bend, stoop, kneel or crawl., • Continually required to talk or hear., • Occasionally work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • While performing the duties of this job, the noise level in the work environment is usually moderate., • The employee must occasionally lift and /or move more than 20 pounds., • Specific vision abilities required by this job include Close vision; Distance vision; Peripheral vision; Depth perception and ability to adjust focus., • Must be able to wear personal protective equipment, including protective eye wear, hard hat, lab coat, gloves, steel-toed shoes, hearing protection, and respirators., • Must be able to safely access and traverse indoor and outdoor obstacles for site inspections, including climbing ladders, walking on stairs, catwalks, and other types of uneven surfaces where activity inspections are needed. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits • Health Care Plan (Medical, Dental & Vision), • 401K, • Life Insurance, • Flexible Spending Accounts (FSA), • Disability Insurance, • Paid Time Off, • Training & Development

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Energy is seeking a Plant Manager – Manufacturing to lead full-site operations at our Goodyear, AZ facility. The Plant Manager will oversee Manufacturing Managers, Production Managers, Value Stream Managers, and Supervisors while driving performance across fabrication, welding, industrial assembly, electrical integration, and paint operations. This Plant Manager role is responsible for full operational execution, scaling production, and delivering against throughput, quality, safety, and on-time delivery in a contract manufacturing environment. This role owns a large-scale manufacturing P&L ($100M+) and requires strong financial leadership, operational discipline, and experience scaling manufacturing operations in industrial environments. The ideal candidate will bring a background in Industrial Engineering or Mechanical Engineering with deep experience across fabrication and system integration processes. Key Responsibilities Plant Leadership & Manufacturing Operations • Lead full-site manufacturing operations as a Plant Manager across fabrication, welding, industrial assembly, electrical integration, and paint, • Oversee Manufacturing Managers, Production Managers, Value Stream Managers, and Supervisors across all production functions, • Drive execution in a high-mix, engineered-to-order contract manufacturing environment, • Ensure alignment of production schedules, system integration activities, and Bill of Materials (BOM) execution across all departments, • Scale operations to support production growth, capacity expansion, and facility performance Lean Manufacturing & Continuous Improvement • Lead enterprise Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement programs across the plant, • Apply Six Sigma, Root Cause Analysis, 5 Whys, and Fishbone methodologies to eliminate defects and improve performance, • Drive plant-wide improvements in throughput, cycle time, and operational efficiency, • Standardize processes and scale best practices across fabrication, welding, assembly, electrical, and paint operations KPI Ownership & Operational Performance • Own plant-level KPIs including on-time delivery, on-time release, inventory turns, throughput, safety, and quality, • Drive ISO9001 compliance and ensure quality systems are embedded across all manufacturing functions, • Improve defect rates, reduce rework, and increase production stability, • Establish performance accountability across all levels of the organization Financial Ownership & P&L Management • Own and manage a large manufacturing P&L ($100M+), including cost control, labor efficiency, and operational spend, • Partner with Finance on budgeting, forecasting, and cost optimization strategies, • Drive margin improvement through operational efficiency, waste reduction, and process optimization, • Monitor cost drivers including labor, material utilization, and overhead Safety, Quality & Compliance • Lead plant-wide safety performance, ensuring compliance with OSHA standards and internal safety protocols, • Maintain a strong safety culture with measurable KPIs and continuous improvement initiatives, • Ensure compliance with ISO9001 and internal quality standards across all operations Cross-Functional Alignment • Partner with Engineering to resolve system integration challenges, fitment issues, and design improvements, • Collaborate with Supply Chain to ensure material availability, BOM accuracy, and inventory performance, • Work with Quality to enforce standards and drive corrective actions, • Align with Program Management to support production schedules and delivery commitments Leadership & Organizational Development • Build and lead a high-performing manufacturing organization across all production functions, • Develop Manufacturing Managers, Production Managers, and Supervisors to drive operational excellence, • Establish leadership accountability and performance standards across the plant, • Support workforce development including technical training, certifications, and leadership growth Requirements Required Qualifications • 10–15+ years of experience in manufacturing leadership roles including Plant Manager, Operations Manager, or Manufacturing Manager, • Extensive experience managing large-scale manufacturing P&L ($100M+), • Experience in contract manufacturing and industrial manufacturing environments, • Strong background across fabrication, welding, industrial assembly, electrical integration, and paint operations, • Proven experience leading Lean Manufacturing, Continuous Improvement, and Six Sigma initiatives, • Experience managing plant-level KPIs including throughput, inventory turns, on-time delivery, safety, and quality, • Strong operational and financial leadership experience in high-mix, engineered-to-order environments Preferred Qualifications • Bachelor’s degree in Industrial Engineering, Mechanical Engineering, or related technical discipline, • Experience scaling manufacturing operations in high-growth environments, • Experience with automation, welding robots, or advanced manufacturing processes, • Certified welder or electrician a plus, • Experience with Six Sigma, Lean Manufacturing certifications, or structured problem solving methodologies Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Energy is seeking a Production Supervisor to lead production and assembly operations on 1st shift. The Manufacturing Supervisor will oversee electro-mechanical assembly, system integration, and production execution in a fast-paced industrial manufacturing environment. This Manufacturing Supervisor role is responsible for driving throughput, quality, safety, and on-time delivery while leading teams in a contract manufacturing environment. Key Responsibilities Production Leadership & System Integration • Lead daily operations as a Production Supervisor overseeing mechanical assembly, electrical assembly, and system integration, • Supervise teams building complex assemblies using mechanical drawings, wiring diagrams, and Bill of Materials (BOM), • Ensure production aligns with on-time delivery and on-time release targets, • Manage production flow in a high-mix, contract manufacturing environment Lean Manufacturing & Continuous Improvement • Drive Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement programs, • Apply Six Sigma principles and structured problem solving including 5 Whys and Fishbone analysis, • Lead Root Cause Analysis for production issues, defects, and downtime, • Improve throughput, cycle time, and production efficiency Quality, Safety & KPI Ownership • Ensure compliance with ISO9001 quality standards and internal quality systems, • Monitor KPIs including throughput, on-time delivery, inventory turns, and defect rates, • Enforce safety standards and track safety performance metrics, • Maintain high standards for in-process inspection and quality control, • Cross-Functional Execution, • Partner with Engineering to resolve production issues and system integration challenges, • Work with Supply Chain to ensure material availability and BOM accuracy, • Support training and development of production teamsRequirements, • 3–7 years of experience as a Manufacturing Supervisor, Production Supervisor, or Assembly Supervisor, • Experience in contract manufacturing or industrial manufacturing environments, • Strong background in electro-mechanical assembly and system integration, • Experience with Lean Manufacturing, Continuous Improvement, and Root Cause Analysis, • Ability to read mechanical drawings, electrical schematics, and BOM structures Preferred Qualifications • Background in fabrication, mechanical, or industrial engineering environments, • Experience with welding, welding robots, or mid-production automation, • Certified welder or electrician strongly preferred, • Experience with Six Sigma, 5S, Kaizen, and structured problem-solving methodologiesBenefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Punch Press Operator Company: Custom Control Sensors Location: Phoenix, AZ Job Type: Full Time – Non-Exempt Industry: Manufacturing Education: High School Diploma or GED Experience: Six (6) months in related field with additional training in a trade school Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS’ Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS’ Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company’s success. Benefits • Medical, • Dental, • 401k with Match, • Employer funded Life Insurance, Long-term Disability, and Short-term Disability, • Paid Sick Leave, • Paid Vacation, • Paid Holidays Job Description: Level 1-Under frequent supervision, employee operates pre-setup runs on punch press, utilizes notcher, hand tools, rotex etc. Checks own work for conformance to specifications. Requires use of calipers and some measuring equipment. Level II-Under general supervision, employee performs set-ups and operates a punch press using all types of dies; compound, progressive, draw, etc. Utilizes notcher, hand tools and operation of spot welder to all applicable specifications. Checks own work for conformance to specifications. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Key Responsibilities: Level I: • Operates pre-setup runs on punch press, • Checks parts to maintain quality production., • Performs regular manual tasks., • Insures that output normally equals or exceeds that expected., • Keeps quality up to acceptable standards with little discrepant work., • Performs tasks equal to or exceeding established standards., • Working consistently, working overtime, and traveling as required., • Conducts himself/herself in a business-like and civil manner., • Ability to react to change productively and perform other essential tasks as assigned. Level II: • Performs set-ups and operates a punch press utilizing all types of dies, compound, progressive, draw, etc., • Adjusts shut height required to hold close tolerances and dimensions., • Utilizes notcher, hand tools, and operation of spot welder to all applicable specifications., • Checks parts utilizing standard measuring equipment., • Performs regular manual tasks., • Insures that output normally equals or exceeds that expected., • Keeps quality up to acceptable standards with little discrepant work., • Performs tasks equal to or exceeding established standards., • Accomplishes production quotas., • Working consistently, working overtime, and traveling as required., • Conducts himself/herself in a business-like and civil manner. Ability to react to change productively and perform other essential tasks as assigned Skills and Requirements: • Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident., • Ability to acquire proficient knowledge of punch press machining including set-ups as required;, • Adequate manual dexterity to safely and proficiently preform pre-setups or set-ups on punch press machine;, • Ability to read, write and follow written and verbal instructions in English, • Ability to work with a number sequence;, • Ability to work well with only a modest amount of repeated instructions;, • Be team oriented and possess flexibility and adaptability Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, to frequently walk, bend, stoop, reach, turn, twist, push, pull, and to occasionally crouch, or kneel. Talk or hear, and to move within the areas of the facilities and parking lots. The employee must also occasionally lift and/or carry objects or loads up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. An annual eye exam may be required. EEO M/F/D/V: Custom Control Sensors, LLC. is an Equal Opportunity/Affirmative Action employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. NO OUTSIDE RECRUITMENT OR STAFFING AGENCIES

Job DescriptionTIG Welder – Train into Industrial Brazing Pay: $24.00 - $40.00 per hour Schedule: Full-Time | Overtime Available Looking for a TIG Welder Ready to Expand Their Skill Set! Are you an experienced TIG Welder looking for an opportunity to learn a highly specialized trade? We are seeking skilled welders who want to transition into industrial brazing while leveraging their existing knowledge of heat control, joint preparation, blueprint reading, and fabrication. This is a great opportunity for TIG welders interested in expanding their capabilities within the growing industrial HVAC, chiller, and natural gas industries. While previous brazing experience is a plus, we are open to candidates with strong TIG welding backgrounds who are eager to learn and develop advanced industrial brazing skills. What You'll Be Doing In this role, you'll work with large copper and steel piping systems used in industrial HVAC and chiller equipment. You'll receive training and hands-on experience in industrial torch brazing while applying many of the same foundational skills used in TIG welding. Responsibilities include: • Performing industrial torch brazing on copper and steel piping systems ranging from 1" to 4" in diameter., • Assembling and joining components including piping, valves, compressors, coils, and fittings., • Reading and interpreting blueprints, schematics, and technical drawings., • Preparing joints through cleaning, fitting, and alignment processes., • Controlling heat input and filler material application to create high-quality, leak-free joints., • Working in various joint positions, including horizontal, vertical, uphill, and downhill configurations., • Performing pressure and leak testing on completed assemblies., • Maintaining a strong focus on quality, safety, and workmanship., • Meeting production schedules while maintaining high standards.Why TIG Welders Excel in This Role Many of the skills developed through TIG welding transfer directly to industrial brazing, including: • Heat control and temperature management, • Reading fabrication drawings and weld symbols, • Attention to detail and precision workmanship, • Understanding metallurgy and filler materials, • Working with thin-wall materials and critical joints, • Fabrication and assembly experience, • Commitment to quality and safety standards If you already have TIG experience, we'll help you develop the specialized brazing techniques needed for industrial HVAC and chiller applications. QualificationsRequired • TIG welding experience in a manufacturing, fabrication, pipefitting, or industrial environment., • Ability to read and interpret blueprints and technical drawings., • Experience using hand tools, power tools, and fabrication equipment., • Strong mechanical aptitude and attention to detail., • Ability to lift up to 45 pounds and work on your feet throughout the shift., • Willingness to learn industrial brazing processes and complete brazing qualification testing.Preferred, • Previous brazing experience., • Pipefitting, plumbing, HVAC, or industrial assembly experience., • Welding school, trade school, or technical training., • Experience working with copper, steel, stainless steel, or alloy materials., • Experience in industrial manufacturing environments.What We Offer, • Competitive pay of $24-$40/hour based on experience., • Opportunity to learn a specialized, high-demand skill., • Career growth within industrial HVAC and chiller manufacturing., • Hands-on training and development., • Overtime opportunities., • Safety-focused work environment., • Stable, growing industry with long-term career potential.Ready to Take Your TIG Welding Skills to the Next Level? If you're a TIG welder looking to expand your expertise and learn industrial brazing while working on complex HVAC and chiller systems, we'd love to hear from you. Apply today and build a career in a specialized trade that's in high demand. Job Type & Location This is a Contract to Hire position based out of Mesa, AZ. Pay and Benefits The pay range for this position is $24.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mesa,AZ. Application Deadline This position is anticipated to close on Aug 3, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for mechanics with tank trailer repair experience! Shift Hours: Monday through Friday, 7:00 AM to 3:30 PM This position is for our Phoenix, AZ branch at 4030 W Lower Buckeye Rd. Pay Range: $24.00 to $41.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • TIG aluminum, stainless or carbon welding experience (optional), • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Elite Fabrication Welder Location: Phoenix, Arizona Company: Railcraft USA Job Type: Full-Time About Railcraft Railcraft is a leading manufacturer of custom aluminum railing systems with over 40 years of industry experience. We specialize in high-end architectural railings, custom fabrication, balconies, canopies, and specialty aluminum products throughout North America. Our Phoenix facility is growing rapidly, and we are looking for exceptional talent to join our team. Position Overview Railcraft is seeking an Elite Fabrication Welder with a minimum of 5 years of fabrication welding experience. This is not an entry-level production welding position. We are looking for a highly skilled craftsman who takes pride in precision, quality, and efficiency. The ideal candidate will have experience fabricating custom aluminum products from drawings, maintaining tight tolerances, and producing architecturally finished work that meets the highest standards. Red Seal Certification or equivalent trade qualification is strongly preferred. Responsibilities • Fabricate custom aluminum railing systems, canopies, decks, and architectural components, • Perform high-quality MIG and TIG welding on aluminum materials, • Read and interpret fabrication drawings and shop drawings, • Layout, fit, tack, and assemble components accurately, • Maintain strict quality standards and dimensional tolerances, • Operate fabrication equipment including saws, drills, grinders, and welding equipment, • Inspect completed work to ensure compliance with company standards, • Work independently with minimal supervision, • Assist in training and mentoring junior welders when required Qualifications Required • Minimum 5 years of fabrication welding experience, • Extensive experience welding aluminum, • Ability to read and interpret fabrication drawings, • Strong fitting and layout skills, • High attention to detail, • Ability to consistently produce clean, high-quality finished products, • Reliable attendance and strong work ethic Preferred • Red Seal Welder Certification, • Journeyman Welder Certification, • Custom fabrication experience, • Architectural metals experience, • TIG welding proficiency What We're Looking For We are not looking for someone who simply welds parts together. We are looking for a professional who: • Takes ownership of their work, • Has pride in craftsmanship, • Solves problems independently, • Produces work they would be proud to put their name on, • Wants to be part of building one of the premier aluminum fabrication companies in North America Compensation Compensation will be based on experience and skill level. Top-tier candidates with proven fabrication and aluminum welding experience will be compensated accordingly.

Job Description PPS is seeking a licensed Certified Welding Inspector for our pipe fabrication facility in Phoenix. This is a full-time, direct hire, permanent opportunity with benefits, huge OT opportunities, and room for growth! The main responsibility of the role will be to evaluate welds and welding processes to confirm they meet specific codes, standards, and specifications. Responsibilities: • Inspect and assess both quality and strength of welds, • Check weld specification and ensure the use of proper equipment, • Review and verify welder qualifications, • Perform audit and inspections, • Verify all equipment, preparation, geometry and procedures to ensure code and standards, • Complete visual examinations, non-destructive examinations and destructive examinations, • Prepare and track all audit reports Review, organize and track all certification and procedural documentation, • Design and implement weld inspection quality assurance plans, • Prepare material control requirements, • Adhere to all safety requirement and protocols, • Implement continuous improvement plans, • Maintain preventative maintenance schedules of tools and machinery Qualifications: • Active CWI certificate is required, • 3 + years experience as a CWI, • Extensive knowledge of relevant welding inspection codes and standards, • Expert with welding symbols and drawings, • Working knowledge of wire and filler materials application for various steel alloys, • Computer literacy

Job Description Team 360 Staffing is hiring experienced Structural Welders for a premier industrial piping and fabrication company in Phoenix, AZ. If you take pride in precision welds and clean fabrication work, we want to hear from you! Pay: $35–$55/hr (DOE) Schedule: Monday–Friday, Full-Time Location: Phoenix, AZ Benefits: 401(k), PTO What You'll Do • Perform MIG, TIG, Stick (SMAW), and Flux-Core (FCAW) welding, • Weld structural steel, pipe, and fabricated components to spec, • Read and interpret blueprints, shop drawings, and weld symbols, • Fit, align, and fabricate metal components, • Inspect welds for quality, penetration, and code compliance, • Operate grinders, torches, plasma cutters, and other fab equipment, • Measure, cut, and prep materials for fabrication, • Follow OSHA safety standards and maintain a clean, organized work area, • Meet production schedules without sacrificing quality What You'll Need • Minimum 3 years of structural welding and fabrication experience, • Proficiency in MIG, TIG, Stick, and Flux-Core welding, • Ability to read blueprints, fabrication drawings, and weld symbols, • Strong knowledge of structural steel and industrial piping, • Excellent measuring and layout skills, • Bilingual (English/Spanish), • Reliable transportation, • Two valid forms of ID (Social Security Card + Driver's License or State ID), • Ability to pass a drug screening and background check, • Authorization to work in the United States Preferred (Not Required) • AWS Welding Certification, • Experience in industrial manufacturing, fabrication, or commercial construction, • Pipe welding experience, • Forklift and/or overhead crane experience Physical Requirements • Ability to stand for extended periods, • Frequently lift up to 75 lbs, • Ability to bend, kneel, climb, and work in various positions, • Comfortable working indoors/outdoors in varying temperatures, • Must wear required PPE throughout the shift Additional Requirements • Must pass a weld test as part of the hiring process, • Must pass a background check and drug screening Apply today — bring your welding skills to a team that values quality craftsmanship and consistency! Company DescriptionAt Team 360 Staffing, we provide customized recruitment and staffing solutions that connect businesses with top talent worldwide. Our expertise spans multiple industries and markets, allowing us to match employers with exceptional candidates who drive success on a global scale. Why Choose Team 360? • Speed with Excellence: We deliver highly qualified candidates rapidly, enabling your organization to scale rapidly without compromising on quality., • Global Reach, Local Expertise: With a robust international network, we connect you with top-tier professionals from around the world, ensuring your business thrives in today’s globalized economy., • Industry Expertise: From technology and healthcare to manufacturing, finance, and beyond, we specialize in sourcing talent across diverse sectors., • Personalized Solutions: We take the time to understand your unique business needs and provide tailored staffing strategies to find the perfect fit for your team. Whether you’re building a local team or expanding globally, Team 360 Staffing is your partner for fast, flexible, and results-driven staffing solutions. Let’s work together to create a workforce that positions your organization for long-term success. Team 360 Staffing – Connecting Businesses with the BEST Talent!At Team 360 Staffing, we provide customized recruitment and staffing solutions that connect businesses with top talent worldwide. Our expertise spans multiple industries and markets, allowing us to match employers with exceptional candidates who drive success on a global scale.\r\n\r\nWhy Choose Team 360?\r\n\r\n- Speed with Excellence: We deliver highly qualified candidates rapidly, enabling your organization to scale rapidly without compromising on quality.\r\n- Global Reach, Local Expertise: With a robust international network, we connect you with top-tier professionals from around the world, ensuring your business thrives in today’s globalized economy.\r\n- Industry Expertise: From technology and healthcare to manufacturing, finance, and beyond, we specialize in sourcing talent across diverse sectors.\r\n- Personalized Solutions: We take the time to understand your unique business needs and provide tailored staffing strategies to find the perfect fit for your team.\r\n\r\nWhether you’re building a local team or expanding globally, Team 360 Staffing is your partner for fast, flexible, and results-driven staffing solutions. Let’s work together to create a workforce that positions your organization for long-term success.\r\n\r\nTeam 360 Staffing – Connecting Businesses with the BEST Talent!

Job Description Job Title: TIG Welder (Stainless Pipe) Shift: 1st Shift | 5:00 AM – 3:30 PM | 50+ hours/week Location: Phoenix, AZ Overview Hiring experienced TIG welders for stainless pipe work (process piping). Mix of shop and field work with steady overtime. Responsibilities • TIG weld stainless pipe (Schedule 10–160), • Perform 6G pipe welding (open root), • Read and follow blueprints and weld symbols, • Prep pipe (bevel, fit-up, purge), • Maintain weld quality and follow safety proceduresRequirements (Must Have), • 3–5+ years TIG welding experience, • Strong stainless steel pipe experience, • 6G welding experience (required), • Able to read drawings and weld symbols, • Experience with purging and clean weldsPreferred, • Experience with flux-core or MIG, • Strong fabrication skillsWork Environment, • Clean shop with some field work, • 50+ hours/week, OT available, • PPE required (boots, hood), • Shop tools providedWhat You Get, • Steady hours with overtime, • Mix of shop and field work, • Consistent pipeline of projectsHiring Process, • Weld test, • Start once clearedJob Type & Location This is a Contract to Hire position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $38.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Phoenix,AZ. Application Deadline This position is anticipated to close on Jul 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Electromechanical Switch Assembler Company: Custom Control Sensors Location: Phoenix, AZ Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GED Experience: Six months or more of experience in a similar industry or some technical training Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits • Medical, • Dental, • 401k with Match, • Employer funded Life Insurance and Long-term Disability, • Voluntary Short-term Disability, • Sick and Vacation Leave, • 9 Paid Holidays Job Description: On a production basis, performs light electronic and/or electromechanical assembly work of low complexity and limited scope. Performs only relatively simple assembly procedures, which require primarily manual dexterity and the ability to work with simple hand tools. The cycle of repetition is ordinarily short with long work runs on the same or similar items. Parts are ordinarily not difficult to handle and soldering, if required, does not involve access problems. Works from samples or simple visual aids (clearly marked drawings or photographs, etc.) and receives detailed instructions as to exact procedures to be followed. Excludes those who are engaged primarily in loading and operating a machine, which assembles parts or components. Key Responsibilities: • Performs only relatively simple assembly procedures, • Performs operation of contact welder;, • Performs operation of orbital swager;, • Utilizes a variety of tools, gages and equipment;, • Keeps quality up to acceptable standards with little discrepant work;, • Performs tasks equal to or exceeding established standards;, • Accomplishes production quotas;, • Keeps work area clean and orderly;, • Ability to react to changes productively and perform other essential tasks as assigned; Skills and Requirements: • Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident., • Performs light electronic and / or electromechanical assembly work of low complexity and scope;, • Operation of resistance soldering unit;, • Performs frequent spring linking as required;, • Adequate manual dexterity to safely and proficiently work with simple small hand tools;, • Ability to work from samples or simple visual aids;, • Ability to read, write, and follow written and verbal instruction in English;, • Ability to work well with only a modest amount of repeated instructions;, • Working consistently, working overtime, as required;, • Be team oriented and possess flexibility and adaptability. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, talk or hear. The employee is frequently required to stand, walk, bend, stoop, reach, turn, twist, push, pull and to move within all areas of the facilities and parking lots. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.

Job DescriptionWho are we? At All Things Metal Industries, we don’t just build steel—we build people, relationships, and lasting careers. We’re proud to be a family-owned company that’s been recognized multiple times as one of Arizona’s Best Places to Work, and we take that seriously. Our culture is fast-paced and driven, but also supportive and humble. We value teammates who are hungry to learn, smart in how they work, and humble enough to grow with others. This isn’t a place for short-term gigs—you’ll find steady work, opportunities to advance, and a team that truly has your back. Whether it’s in the shop, the field, or the office, we believe in promoting from within, investing in our people, and helping each other reach the next level. If you’re looking for a long-term home where hard work meets big opportunity, All Things Metal is the place to be. KorFab KorFab provides quick-turn components and decorative metal panels. Our nimble team delivers quality and creativity for smaller, specialized projects while staying aligned with the core values and support of All Things Metal Industries. Role Overview As a KorFab Fabricator, your day will include a mix of welding and fabrication work, depending on the flow of projects. Some days you’ll be prepping and cleaning plate, reading tape measures, or running shop tools; other days you’ll be on the welder, laying down GMAW or dual shield welds, or helping assemble decorative panels and structural pieces. This role requires flexibility! You’ll shift between welding, fitting, operating equipment, and even shop upkeep to keep projects moving. We mention that KorFab is quick-turn, this means we emphasize speed, versatility, and quality. If you like variety, teamwork, and seeing projects through from raw steel to finished product, you’ll fit right in here. Key Responsibilities • Assist the KorFab team with daily fabrication duties, • Use a stud gun (training provided if needed), • Clean and prep metal plate for fabrication, • Prime and paint using a paint gun (training provided if needed), • Operate a press brake (preferred, but training available), • Perform basic welding (Flux core, Dual Shield, MIG), • Safely use basic shop tools (grinders, plasma torch, mag drill, chop saw, reciprocating saw, iron worker, band saw, time saver (automatic belt sander), • Follow safety, quality, and production standards, • Communicate effectively with team members and leadership, • Material handling (forklift training provided), • Work at a fast and efficient pace Qualifications • 1+ years of fabrication or welding experience, • Must be able to weld GMAW and Dual Shield, • Ability to read a tape measure, • Reliable transportation to arrive on time, • Ability to pass a background check and drug screen, • Ability to stand for most of the shift and work outdoors in the heat, • Ability to lift 50+ lbs, • Professional working proficiency in English required Skills & Abilities We’re looking for someone who is: • Hungry, humble & smart, • Proactive and trustworthy, • Dependable and self-motivated, • Organized and detail-oriented, • Positive and team-oriented, • Able to work under pressure while staying effective, • A clear communicator, • Willing to learn and take direction Schedule Monday - Friday 5 am - 3 pm with a 1 hour unpaid lunch Occasional half days on Friday (depending on need and department) Compensation & Benefits • $22+/hr, • Steady, long-term work in a supportive environment, • First-time homebuyer program with $500 bonus and optional realtor/mortgage support, • Dave Ramsey SmartDollar financial education resources, • Full benefits including medical, dental, vision, PTO, and sick time, • 401(k) with company match and profit-sharing contributions, • Family-friendly events and team-building activities, • Birthday and work anniversary recognition, • Cash bonuses for production roles and internal growth opportunities, • Drug Free Workplace Powered by JazzHR u7y5gz9B3M

Job Description Now Hiring: Aerospace TIG Welder Join a company that recognizes craftsmanship, values reliability, and invests in long-term careers. We are seeking a skilled TIG Welder to produce high-quality components for aerospace, defense, medical, and industrial applications. This role is ideal for experienced welders who take pride in their work, as well as professionals looking to continue developing their skills within a stable, well-established organization that prioritizes quality, safety, and growth. Perks & Benefits: • Weekly Pay – Get paid fast, every Friday, • Competitive Starting Pay: $20.00 to $22.00/hr. (DOE)., • Overtime Available, Maximize your earnings., • Shift Differentials for days and weekends., • Full Medical, Dental, and Vision Benefits., • Work-Life Balance Flexible shifts to support your lifestyle. Job Responsibilities: • Perform various types of weld preparation, welding, and weld finishing operations to manufacture products according to customer drawings, specifications, and work instructions., • Interpret mechanical drawings, including weld requirement symbology., • Execute TIG Welding and fabrication tasks with consistency and accuracy., • Conduct process inspections, complete required certifications, and maintain proper documentation., • Maintain welding equipment and ensure work areas meet safety and quality standards. What We’re Looking For: • 3+ years of experience of TIG Welding (GTAW), preferably in Aerospace/Semi-Conductor Field., • Knowledge of wire and filler material applications for various steel alloys, aluminum, and select exotic materials., • Working knowledge of fixturing and weld setup parameters (amps, volts, etc.)., • Ability to read wiring schematics., • Strong attention to detail and commitment to producing high quality welds., • Positive attitude and a willingness to learn and grow.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Welder IV to join us in Chandler! The Aluminum TIG Welder IV performs advanced welding, fabrication, and repair of metal components using Gas Metal Arc Welding (MIG) and Gas Tungsten Arc Welding (TIG) techniques. This role works on complex, close-tolerance weldments following AWS codes and symbols, ensuring precision and quality. Responsibilities include layout, fit/tack, and fabrication using fixtures and jigs, while maintaining safety standards and equipment care. Duties and Responsibilities • Interpret work orders, prints, and instructions to plan welding procedures, tools, and material requirements., • Perform MIG and TIG welding on steel, stainless steel, aluminum, and sheet metal components to meet AWS standards., • Lay out, fit, tack, and fabricate weldments with multiple details using fixtures and jigs where applicable., • Clean and prepare surfaces for welding; inspect completed welds for compliance with quality standards., • Operate welding machines, hand tools, air tools, and grinders; perform minor equipment maintenance., • Use measuring devices (micrometers, calipers, tape measures) to ensure accuracy and precision., • Maintain safe work practices and adhere to company safety policies., • Assume responsibility for assigned tools and equipment; perform other duties as required.Knowledge, Skills, Experience, • Expert proficiency in MIG and especially TIG welding techniques and processes., • Ability to read and interpret blueprints and AWS welding symbols accurately., • Skilled in working with steel, stainless steel, aluminum, and sheet metal., • Strong understanding of welding machine setup and operation., • Ability to perform welds that meet visual inspection and destructive testing standards., • Proficiency in using measuring tools and performing basic math calculations, including conversions., • Knowledge of fabrication techniques, cutting, burning, and surface preparation., • Competence in operating hand tools, air tools, and electric grinders safely and effectively.Education, Certifications, Requirements, • High School diploma or equivalent experience., • 4+ years of experience in welding., • Two-year vocational welding program or equivalent experience.Work Environment, • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Work is performed primarily in a manufacturing environment., • The worker has protection from weather conditions but not necessarily from temperature changes., • Required to wear personal protective equipment where applicable., • One or more of the following conditions that affect the respiratory system of the skin: Fumes, odors, dust, mists, gases, or poor ventilation., • Subject to hazards including electrical current, moving mechanical parts, and exposure to chemicals., • May involve exposure to noise hazard areas., • Overnight Travel - Work may require out-of-town travel depending upon assignment (training and meeting).Physical Demands, • Work may require the ability to lift 10-20 pounds infrequently., • Ability to lift, stoop, kneel, crouch, reach, walk, push, pull, grasp., • Prolonged standing and bending intermittently during work hours., • Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Is subject to frequent interruptions., • Ability to move arms, hands, and fingers to type., • Close vision required. Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Job Description Welder IV Location: Phoenix, AZ Shift: 2nd Shift — 2:30 PM to 1:00 AM Pay Range: $25–$33/hr (based on experience) Training: Two weeks on 1st shift About the Role We are seeking an experienced Welder IV to join our Phoenix team. This role involves performing high‐quality MIG and TIG welding on a variety of materials and complex weldments, following AWS codes and blueprint specifications. The Welder IV will work with steel, stainless steel, aluminum, sheet metal, and tubing in a manufacturing environment. Key Responsibilities • Review instructions, blueprints, and work orders to plan welding procedures, tools, and materials., • Perform MIG and TIG welding on a wide range of metals and weldment types., • Lay out, fit, tack, and fabricate multi‐component weldments using fixtures and jigs., • Clean and prepare surfaces for welding., • Inspect welds to ensure compliance with quality standards., • Perform minor equipment maintenance., • Maintain and care for assigned tools and equipment., • Follow all safety procedures and company policies., • Maintain reliable attendance., • Perform additional duties as assigned. Knowledge, Skills & Abilities • Proficiency in manual and machine TIG/MIG welding., • Ability to read and interpret blueprints and AWS welding symbols., • Strong understanding of welding procedures and machine setup., • Experience with steel, aluminum, stainless steel, and sheet metal., • Ability to produce welds that pass visual and destructive testing., • Skilled in using measuring tools (calipers, micrometers, tape measures, squares)., • Basic math skills for conversions and calculations., • Ability to operate hand tools, air tools, and grinders. Education & Certifications • High school diploma or equivalent., • Completion of a two‐year vocational welding program or equivalent experience. Experience Requirements • 4+ years of welding experience in a manufacturing or fabrication environment. Physical Demands & Work Environment • Work performed primarily in a manufacturing environment., • Reasonable accommodations may be made for individuals with disabilities., • Ability to lift 10–20 lbs infrequently; up to 50 lbs occasionally., • Frequent standing, bending, kneeling, crouching, reaching, pushing, pulling, and walking., • Exposure to fumes, dust, gases, chemicals, and temperature changes., • Required use of PPE., • Possible exposure to noise, moving mechanical parts, and electrical hazards., • Occasional travel for training or meetings.Company DescriptionSkySource Solutions believes in attaining success. We know success is important to our clients, applicants, candidates, and our internal staff and want to be an integral part of that process. The SkySource Difference: We are not just another staffing firm! We truly care about our candidates long-term success and how we get there together. So the BIG Question is... How do we get there? Our team of Recruiters come with 5 plus years of industry experience and are not looking to just find you a job. We truly care about your short-term and long-term career goals and understand what's important in making that next career move. We want to understand what you are looking for from a cultural, compensation and benefits perspective. Apply today and experience the SkySource difference!SkySource Solutions believes in attaining success. We know success is important to our clients, applicants, candidates, and our internal staff and want to be an integral part of that process.\r\nThe SkySource Difference: We are not just another staffing firm! We truly care about our candidates long-term success and how we get there together. So the BIG Question is... How do we get there?\r\nOur team of Recruiters come with 5 plus years of industry experience and are not looking to just find you a job. We truly care about your short-term and long-term career goals and understand what's important in making that next career move. We want to understand what you are looking for from a cultural, compensation and benefits perspective. \r\n\r\nApply today and experience the SkySource difference!

Job DescriptionCompany Description About SOCOTEC: SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects. SOCOTEC offers competitive salary and benefits, mentorship, training, and social activities. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description We are seeking an experienced AWS Certified Welding Inspector (CWI) to perform structural steel inspection services on commercial, industrial, and public works construction projects. The successful candidate will conduct shop and field inspections of structural steel welding, bolting, and nondestructive testing activities while ensuring compliance with applicable codes, specifications, and project requirements. Responsibilities • Perform shop and field inspections of structural steel welding and bolting activities., • Verify compliance with approved plans, specifications, AWS standards, and applicable building codes., • Review welding procedures, welder qualifications, and inspection requirements., • Perform and document welding inspections in accordance with project specifications and industry standards., • Coordinate and review nondestructive testing (NDT) activities and results., • Read and interpret structural drawings, shop drawings, specifications, and code requirements., • Prepare accurate daily reports, inspection documentation, and project records., • Maintain complete and organized project files, including reports, field notes, correspondence, RFIs, and supporting documentation., • Communicate inspection findings and project updates to project managers, contractors, engineers, and client representatives., • Identify and document non-conforming work and verify corrective actions when required., • Travel to project sites as needed to support inspection activities throughout the region., • Perform inspections in accordance with company quality standards and safety procedures.Qualifications Required Qualifications • Current AWS Certified Welding Inspector (CWI) certification., • UT Shear Wave Level II certification required., • Minimum of 3 years of experience in construction quality assurance, welding inspection, special inspections, or related construction services., • Thorough knowledge of structural steel welding, bolting, and applicable AWS codes and standards., • Ability to read and interpret structural drawings, shop drawings, specifications, and building code requirements., • Strong attention to detail and ability to maintain accurate project documentation., • Excellent verbal and written communication skills., • Positive attitude, strong work ethic, and organizational skills., • Willingness and ability to travel for project assignments., • Valid driver's license with a satisfactory driving record., • Ability to successfully complete background screening and drug testing requirements, if applicable. Preferred Qualifications • Associate's or Bachelor's degree in Engineering, Construction Management, Welding Technology, or a related field., • Additional NDT certifications (MT, PT, RT, VT, or other Level II/III certifications)., • ICC Structural Steel and Bolting Special Inspector certification., • ICC Structural Steel Welding Special Inspector certification., • Experience performing inspections on large commercial, industrial, infrastructure, or public works projects., • Familiarity with AWS D1.1, AISC requirements, and applicable building codes. Additional Information Locations: Phoenix, AZ or Salt Lake City, UT and willing to travel throughout Utah and Arizona Your information will be kept confidential according to EEO guidelines. For more information, please visit www.socotec.us Job Type: Full-Time SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

Job Description Field Installer – Ornamental & Light Structural Steel Location: Phoenix, AZ Full-Time | Hourly Pay (DOE) Competitive Pay + Full Benefits Package Are you a skilled Field Installer with experience in ornamental and light structural steel? Join our dynamic and expanding fabrication and erection company in Phoenix, AZ, where we specialize in commercial fencing, park structures, automatic gates, and custom metalwork. Our reputation in the Phoenix Metro area continues to grow — and we want you to be part of it! Requirements: Minimum 2 years of field installation experience in steel-related projects. Certified Welder – active certification required. Strong knowledge of installing stairs, balcony rails, Ramadas, canopies, trellises, fences, and gates. Proficient in rigging, unloading, and securing steel materials. Skilled in machinery operation, including bobcats, reach forks, and augers. Familiar with OSHA standards and PPE safety best practices. Ability to manage project timelines and detailed daily logs. Bilingual (English/Spanish) candidates preferred. Must possess a valid driver’s license. Highly motivated, energetic, and strong critical thinking skills. Strong problem-solving and organizational abilities. Effective communication and coordination with team and clients. Key Responsibilities Execute safe and precise installation of steel structures and components. Perform daily equipment inspections and maintenance checks. Oversee all aspects of assigned installations from start to finish. Ensure job site safety and OSHA compliance at all times. Maintain clear documentation and daily project logs. Collaborate closely with internal teams to meet project deadlines. Attend client meetings and provide professional communication on-site. Quickly identify and report delays or issues to management. Support logistics including loading/unloading and transport prep of materials. What We Offer Hourly pay based on experience Medical, dental, vision, and life insurance Up to 40 hours of Paid Sick Leave (accrued) Holiday pay Opportunities for growth within a reputable company Ready to join our team? Send your resume and take the next step in your career with a company that values your skills and dedication. We are proud to be an Equal Opportunity Employer and welcome applicants from all backgrounds.

Job Description Job: Fabricator / Welder Location: Phoenix, AZ 85029 Pay: $19-$28/hr Schedule: M - F 6a - 3p (1hr lunchbreak TBD) This is a Full-Time, (Temp to Hire position) Overtime opportunities during peak and construction seasons Excellent Benefits Including: Medical, Dental, Vision, PTO & after trial period Fabrication Associate Job Description: PrideStaff is working with a local manufacturing facility who is seeking Fabricators & Welders to join their team. The Associate will deliver high quality, customized metal components and structural supports configured for precise fittings. The ideal fabricators and welders are categorized by their primary process expertise. Candidates who pass multiple weld tests (e.g., MIG + TIG on stainless/aluminum) are eligible for higher starting pay tiers. The ideal Fabricator and Welder has minimum 1 to 3 years of industrial/shop welding experience (MIG, TIG, or Dual Shield) Testing: Must be able to pass an in-shop hands-on weld test for your primary process (e.g., T-joint fillet, groove weld, or visual inspection test). Tools: Own basic PPE (Hard hat helmet, steel-toed boots) and basic hand tools (tape measure, squares, slag hammer). Note: Shop tools may or may not be provided. Physical: Able to stand, bend, and lift up to 50 lbs consistently throughout a 10-hour shift in a typical desert-climate shop environment. Language: Must be able to read, write, and communicate effectively in English to understand structural fabrication drawings and safety signage. Fabricator & Welder Associate Duties & Responsibilities: Read and Interpret Specifications: Analyze blueprints, engineering drawings, welding symbols, and shop work orders to accurately plan the layout, cutting, and assembly sequence of each project. Material Preparation and Cutting: Set up and safely operate shop fabrication machinery—including band saws, ironworkers, shears, and plasma cutters—to cut and prep steel, stainless steel, and aluminum materials to exact dimensions. Parts Assembly and Fit-Up: Align, clamp, and square workpieces using jigs, fixtures, framing squares, and hand tools to ensure precise fit-up and dimensional tolerance before final welding. Execute Structural and Sheet Metal Welding: Perform high-quality MIG, TIG, or Dual Shield welds in flat, horizontal, vertical, and overhead positions on various metal thicknesses, ensuring deep penetration and structural integrity. Post-Weld Finishing and Quality Control: Visually inspect all finished welds for defects (such as porosity, cracks, or undercut) and utilize grinders, sanders, and polishers to clean, deburr, and finish products to required cosmetic or sanitary standards. Equipment Maintenance: Perform daily safety inspections and basic preventative maintenance on welding machines, torches, wire feeders, and shielding gas regulators to prevent downtime. Maintain Workspace Safety: Keep work areas clean, organized, and free of hazards while strictly adhering to all company safety protocols and OSHA standards, including the proper use of PPE. Collaborate and Problem-Solve: Work closely with the shop foreman, estimators, and fellow fabricators to troubleshoot design challenges, minimize material waste, and ensure projects are completed on schedule. PrideStaff Hiring Requirements: • Must be 18+ Years Old, • Must be Willing to Submit to a Pre-Employment Background Check, • Must be Willing to Submit to a Drug Screen, • Must be Able to Provide Proof of Eligibility to Work in The U.S. Enhance your career with a full-time job, with a great company, competitive wages, and let PrideStaff support you in your future employment endeavors. Your future starts with PrideStaff! Company DescriptionPrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country.PrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country.

Job Description Who We Are At All Things Metal Industries, we don’t just build steel—we build people, relationships, and lasting careers. We’re proud to be a family-owned company that’s been recognized multiple times as one of Arizona’s Best Places to Work, and we take that seriously. Our culture is fast-paced and driven, but also supportive and humble. We value teammates who are hungry to learn, smart in how they work, and humble enough to grow with others. This isn’t a place for short-term gigs—you’ll find steady work, opportunities to advance, and a team that truly has your back. Whether it’s in the shop, the field, or the office, we believe in promoting from within, investing in our people, and helping each other reach the next level. If you’re looking for a long-term home where hard work meets big opportunity, All Things Metal is the place to be. ATM Steel ATM Steel is our structural steel fabrication and erection team. We focus on large-scale projects in the Phoenix area, bringing experience, capacity, and precision to every job. Role Overview The CNC Operator is responsible for operating various CNC cutting equipment—including plasma cutters and laser cutters—while ensuring parts meet quality standards. This role requires attention to detail, adherence to safety rules, and the ability to work independently in a fast-paced production environment. No prior experience is required, we will train! Key Responsibilities • Load and unload material from machines., • Neatly palletize processed parts., • Forklift Usage., • Blueprint Reading., • Operate multiple different CNC Machines., • Plasma Table, • Laser Table, • Small Profiles Tube processor, • Pipe Bender, • Beamline, • Cobot Welder, • Machine and Program setup., • In depth machine maintenance., • General workplace cleanliness adherence., • Work on additional equipment or tasks as directed by supervisor., • Work in accordance with established safety rules and good housekeeping practices, • Operate additional equipment or perform other tasks as directed by the CNC manager Qualifications • No prior experience is required, • Preferred experience includes:, • Experience with reach forklifts and basic hand tools, • Able to read and interpret blueprints, including part tolerances, • If you want to learn how, apply! We will train you with no experience. Skills & Abilities • Ability to interpret a variety of instructions and make decisions based on them, • Excellent communication skills, • Forklift operation skills, • Attention to detail and commitment to quality, • Ability to work independently and follow safety protocols, • Must be able to work independently, • Quality Focused. Schedule Monday - Friday 5 am - 3 pm with a 1 hour unpaid lunch Occasional half days on Friday (depending on need and department) Compensation & Benefits • $20+ an hour depending on experience, • Steady, long-term work in a supportive environment, • First-time homebuyer program with $500 bonus and optional realtor/mortgage support, • Dave Ramsey SmartDollar financial education resources, • Full benefits including medical, dental, vision, PTO, and sick time, • 401(k) with company match and profit-sharing contributions, • Family-friendly events and team-building activities, • Birthday and work anniversary recognition, • Cash bonuses for production roles and internal growth opportunities Powered by JazzHR MLY3D2HstV

Job Description Auto Body Collision Repair: Body Technician The Body Technician is a skilled craftsman with a thorough understanding of how to restore automobiles with light to heavy damage through collision repair. Key responsibilities include assessing exterior damage, repairing manufacturer guidelines, ensuring necessary parts, reshaping panels with minor damage, welding and refinishing techniques as needed. Job Responsibilities: • Ensure repairs adhere to OE standards, DRP part choices, and ADAS requirements for calibrations and scanning, verifying a quality and safe repair., • Complete disassembly of vehicles, • Refit new parts such as bumpers, fenders, grills, moldings, and other bolt-on and welded items., • Complete all repairs in a manner in which the repaired areas are restored to the original manufacturer’s specifications, including door, hood and deck alignments, chassis, and frame measurements, and welded on unibody parts., • Check all parts for accuracy before starting the repair and notify the Estimator of any incorrect parts or other discrepancies., • Work efficiently to meet the target delivery date assigned to an RO., • Assume responsibility for all parts assigned to your job(s), • Protect the interior and exterior non-repair areas of all vehicles in repair from additional damage, including dust, dirt, scratches, primer, overspray., • Read and understand every line item of each vehicle’s RO as pertaining to your responsibilities and visually inspect every vehicle to ensure that all the repairs are complete., • Provide guidance, education, and assistance to the assigned apprentice in such a manner that furthers their developmental growth. Key Performance Metrics • Customer Service Index Score 95+ for Quality, Done on Time, and Net Promoter Score, • Cycle Time Efficiency Skills/Qualifications: • I-CAR Gold Class and ASE certification is a plus., • Complete understanding of all facets of light to heavy automobile collision repair., • Knowledgeable in safety guidelines for repair., • Skilled welder with the ability to remove and refit welded panels as well as the bolt-on items required in a typical crash repair., • The ability to read, understand, and perform written instructions accurately and consistently and to work independently as well as with others in an organized manner. Behavioral Excellence Required: • Perform all assigned responsibilities according to the Company Standard Operating Procedures., • Maintain a clean, organized work area always, adhering to 5S organization., • Participate in training programs as required to maintain the technical and professional skills and techniques necessary for this position., • Extend normal working hours as necessary to accommodate workload and customer requirements.

Job DescriptionDescription: Position Summary: We are seeking a highly skilled Fabrication Welder to join our team. The ideal candidate will be proficient in MIG welding, with experience in machine maintenance and setup. This position requires working with various metals, including Galvannealed, CRS, HRS, Stainless, and other materials of varying thicknesses. TIG welding experience, particularly with Aluminum TIG and Aluminum Spool Gun, is a plus. The role also requires a strong attention to detail, familiarity with Lean 5S practices, and a commitment to maintaining a clean and organized work environment. Job Functions: · Perform MIG welding on a variety of metals, including Galvannealed, CRS, HRS, Stainless, and other metals of varying thicknesses. · Set up and maintain welding machines, ensuring proper functionality and readiness for production. · TIG welding experience is a plus, especially with aluminum TIG and aluminum spool gun. · Follow all safety protocols associated with welding and fabrication, including the handling of hazardous materials and equipment. · Change gas tanks and ensure the correct gases are used for specific welding tasks. · Operate forklifts for material handling (preferred). · Use hand tools associated with welding and fabrication, such as grinders, cutting wheels, and plasma cutters. · Interpret blueprints and weld symbols to ensure the proper execution of welds and fabrication processes. · Maintain a strong attention to detail in all tasks, ensuring quality and precision in welds and finished parts. · Follow Lean 5S practices, maintaining a clean, organized, and efficient workspace that supports overall productivity and safety. · Ensure cleanliness of work area by consistently cleaning up after tasks, keeping tools and equipment in their designated locations, and adhering to 5S principles for improved organization and efficiency. Skills: · Proficient in MIG welding techniques, with a solid understanding of welding principles and materials. · Strong background in machine maintenance and setup for welding equipment. · Experience working with Galvannealed, CRS, HRS, Stainless, and other metals of various thicknesses. · TIG welding experience is a plus, particularly in aluminum. · Familiar with safety protocols and the use of protective gear in a welding environment. · Ability to interpret prints and weld symbols with attention to detail. · Forklift experience preferred but not required. · Ability to change gas tanks and ensure the proper handling of welding gases. · Comfortable using a variety of hand tools, including grinders, cutting wheels, and plasma cutters. · Familiarity with Lean 5S principles and a commitment to maintaining a clean and organized workspace. Requirements: Qualifications: · High school diploma or equivalent; welding certification preferred. · Minimum of 2 years of welding experience in a fabrication or manufacturing environment. · Forklift certification preferred. · Ability to lift and move materials, equipment, and tools up to 50 lbs. CLOSING STATEMENT: This summary is not an all-inclusive description of job duties. Other job duties and responsibilities may also be assigned by the incumbent’s supervisor at any time based upon Company need. Vantage Mobility is an equal opportunity employer (m/f/d/v). We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. Vantage Mobility is an equal employment/affirmative action employer. If you need accommodation for any part of the employment process, including completion of the application, because of a disability, please call (602) 304-3288 to let us know the nature of your request.

Job DescriptionTop Job Located in Phoenix, AZ Salary: $23/hr Now Hiring - Metal Manufacturing Professionals Phoenix, AZ Pay: $23.00 per hour Full-Time | Multiple Shifts Available A growing Metal Manufacturing Company in Phoenix is seeking skilled and motivated manufacturing professionals to join our team. If you have experience in metal fabrication, machine operation, or welding, we want to hear from you! Available Positions Welder Requirements: • 1-2 years of welding experience required, • Ability to read and interpret blueprints and work orders, • Experience using MIG and/or TIG welding equipment, • Maintain quality and safety standards Metal Manufacturing Machine Operators (Manual Machines) Equipment Experience Preferred: • Saws, • Punch Presses, • Press Brakes Requirements: • 1-2 years of manufacturing or machine operation experience, • Ability to read measuring tools such as tape measures, calipers, and micrometers, • Strong attention to detail and quality control, • Ability to work in a fast-paced production environment CNC Machine Operators Requirements: • Previous CNC machine operating experience preferred, • Ability to load materials, monitor production runs, and inspect finished products, • Familiarity with measuring instruments and blueprint reading, • Strong mechanical aptitude and commitment to safety Schedule Options Choose the shift that works best for you: 1st Shift: Monday - Friday, 6:00 AM - 2:30 PM 2nd Shift: Monday - Friday, 2:00 PM - 10:45 PM Compensation & Benefits • Starting Pay: $23.00 per hour, • Full-time, stable employment, • Opportunity for growth and advancement, • Work with an established manufacturing team Qualifications • Minimum 1-2 years of related experience preferred, • Reliable transportation and strong attendance, • Ability to lift, carry, and move materials as needed, • Commitment to workplace safety and quality standards Apply Today! We are actively hiring and looking to fill multiple openings immediately. If you're an experienced Welder, Manual Machine Operator, Press Brake Operator, Punch Press Operator, Saw Operator, or CNC Machine Operator, we encourage you to apply today! Express Employment Professionals Apply now to learn more about these exciting manufacturing opportunities! #2107 Express Office: Peoria 8345 West Thunderbird Road Suite B-107 Peoria, AZ 85381

Job DescriptionOverview: A leading employee-owned construction company is seeking an experienced Field Foreman to supervise steel erection projects on-site. This role is critical to ensuring the safe, efficient, and high-quality completion of structural and miscellaneous steel installations. The position offers a hands-on leadership opportunity in a safety-focused and collaborative environment, with the chance to mentor and develop a skilled team of ironworkers. The Role: The Field Foreman will oversee daily field operations, including personnel, materials, tools, and equipment, ensuring projects are completed safely, on schedule, and to contract specifications. Success in this role means maintaining safety standards, delivering quality workmanship, and coordinating effectively with project managers, fabrication teams, and on-site personnel. Responsibilities: Serve as OSHA Competent Person on job sites, enforcing safety procedures and standards. Manage daily personnel, materials, and equipment, tracking time and productivity. Interpret construction drawings and specifications to guide field operations. Control the erection of steel structures to meet contract requirements and maintain stability. Coordinate site layout and material deliveries with project managers and fabrication shop. Conduct daily safety meetings and maintain accurate logs of safety and production activities. Manage quality control for welding and bolting procedures in the field. Conduct inspections of tools, equipment, and structural assemblies for safety and quality compliance. Train, mentor, and develop ironworkers on safe and efficient work practices. Communicate effectively with project managers, trades, and team members to ensure smooth operations. Requirements: Minimum 5 years of experience in structural steel erection. Strong blueprint reading and interpretation skills. High school diploma or equivalent. Certified welder (AWS D1.1 SMAW, Positions 1F–4F & 1G–4G, thickness 1/8”–1”). Completed OSHA 10-Hour Program and Operation Safe Site – Subpart R training. Certified operator of Reach Forklift, Boom, Scissor Lift, and Hilti Powder Actuated Equipment. Certified Rigger. Knowledgeable in AWS and AISC requirements. Strong communication skills and ability to train others. Excellent physical balance and practical judgment on-site. Nice to Have: Experience in an employee-owned company environment. Prior leadership of diverse structural steel projects. Salary: Competitive compensation based on experience. Location: On-site at project locations, Phoenix, AZ , United States of America. Benefits: Employee ownership participation (ESOP) Health and wellness benefits Professional development opportunities Collaborative and supportive company culture

Job Description Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives all across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for the past 120 years we have proudly supported local governments, municipalities, water departments, and businesses all across the United States, and the world. What We Offer: • Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority., • Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level., • Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family. About the Role: U.S. Pipe is seeking a Welder to join our team. This position is responsible to lay out, fit and fabricate metal components to assemble structural forms using knowledge of welding techniques, metallurgy, and engineering requirements. Specific Responsibilities: • Does all work required of Welder “B”., • Does all types of submerge arc welding., • Does layout work and works from blueprints on difficult jobs without supervision., • Does special repair and construction jobs as required., • Does maintenance welding as required., • Assigns work in absence of group leader or foreman., • Responsible for good housekeeping of work area., • Does other work as assigned by supervisor. Qualifications: • Must pass A.W.S. welding test, either X ray or U.T., • Must have full knowledge of all kinds of welding work and equipment., • Must be safety conscious at all times.

Job Description We are seeking experienced Welder Fabricators to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Field Welder should be capable of going out in the field, taking measurements, and coming back to the shop as well as working in the field. Prefer experience reading blueprints, cutting metal to size, fabricate structures and work outside. Shop Welder is responsible for custom fabrication. Should be capable of creating custom fabrication, prefer experience reading blueprints, cutting metal to size, finish grinding and sanding mostly aluminum spool gun welding and GMAW Most of the projects that we do are custom projects like gates, fencing, water features, trellis, arbors/pergolas and much more. Background check will be run to ensure clean background and driving record (jobs are throughout the valley). You must be clean, on time and the ability to work in hot weather. This is not welding the same thing every day so a can-do attitude is a must. We look for people who can read plans and figure out how to make things work, not tell us all the reasons why something can’t happen. Must be friendly and works well with others. Willing to work overtime when asked. Able to lift heavy objects and be self-motivated to get the job done. Normal hours vary seasonally in the summer they are typically 5-2 Monday – Friday, but overtime does happen. This is a great place to work with lots of opportunities. Email resumes and pictures of any custom work you’ve done in the past. We will contact you if interested to set up an interview. Shop is located in Tempe. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance, • Read blueprints and build structures per plan. Cut metal to build structures. Preform quality welds., • Adhere to all safety standards and protocols., • Drive company vehicle to job location and build structures, fences, or other metal work., • Report progress to supervisor daily., • Give direction to a crew, hold them accountable for safety. Qualifications: • 1 year minimum experience welding / fabricating on the job experience, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload Desired Qualifications: • 3-5 years of applicable experience field welding, building structures, Flux Core welding., • 1-2 years running a crew., • Able to read blueprints and build per plan., • Able to work in 100+ degree weather, working outside, and able to lift 50+ LBS throughout the day., • Able to drive a company vehicle., • OSHA 10., • Familiar with rigging and reach forks.Company DescriptionCreative Environments Pool, Spa, and Landscape Design, since 1950, offers all of Arizona the exterior services you expect. Creative Environments is an industry leader in the design-build process of pool/spa and landscaping in the southwest. We design, construct, and maintain award winning projects in both commercial and residential applications throughout Arizona (Greater Phoenix area, Tucson, Sedona, Northern AZ). Our work has also extended into the East Bay of California (San Francisco/Oakland/Orinda), Southern California (Encinitas/Del Mar/Malibu), Hawaii (Kauai), Costa Rica, Cabo San Lucas, and elsewhere! Our environment is fast-paced, challenging, exciting, and full of learning opportunities as every project we touch is unique. From residential pool/spa landscape, to multi-million dollar custom landscapes, to resorts (The Phoenician, Ritz-Carlton, Four Seasons, Fairmont Princess) to commercial projects (The Biltmore Commerce Center), to community development, we work on everything outdoors: pool/spa, water feature, decking, masonry, utilities, shade structures, casitas/shade structures, custom metal and wood work, lighting, and landscape/irrigation.Creative Environments Pool, Spa, and Landscape Design, since 1950, offers all of Arizona the exterior services you expect. Creative Environments is an industry leader in the design-build process of pool/spa and landscaping in the southwest. We design, construct, and maintain award winning projects in both commercial and residential applications throughout Arizona (Greater Phoenix area, Tucson, Sedona, Northern AZ). Our work has also extended into the East Bay of California (San Francisco/Oakland/Orinda), Southern California (Encinitas/Del Mar/Malibu), Hawaii (Kauai), Costa Rica, Cabo San Lucas, and elsewhere! Our environment is fast-paced, challenging, exciting, and full of learning opportunities as every project we touch is unique. From residential pool/spa landscape, to multi-million dollar custom landscapes, to resorts (The Phoenician, Ritz-Carlton, Four Seasons, Fairmont Princess) to commercial projects (The Biltmore Commerce Center), to community development, we work on everything outdoors: pool/spa, water feature, decking, masonry, utilities, shade structures, casitas/shade structures, custom metal and wood work, lighting, and landscape/irrigation.

Job DescriptionQLM is seeking experienced 2G, 3G, and 4G Welders to join our fabrication team in Glendale, Arizona. If you can weld vertical and overhead without breaking a sweat, we want to talk to you. Responsibilities: • Perform 2G (horizontal), 3G (vertical), and 4G (overhead) welds on carbon steel, • Read and interpret blueprints and weld symbols, • Fabricate and assemble tank components to specification, • Maintain weld quality and production standards, • Follow all shop safety protocols Qualifications • Proven experience welding in 2G, 3G, and 4G positions, • 6G CERTIFIED FOR HIGHER END OF PAY SCALE, • Ability to pass an on-site weld test, • Experience with MIG, Flux Core, and/or Stick welding, • Ability to read blueprints and use measuring tools accurately, • Strong attention to detail and commitment to safety, • Reliable transportation to Glendale, AZ Quality Labor Management (QLM) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, transgender status or sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. The Company complies with applicable Federal state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Job Title: Structural Steel Shop all Positions, fitters, welders, parts, paint and install Location: 7851 E Pr Ave, Mesa, AZ 85212 Employment Type: Full-Time, In-person Compensation: $20 to $32 per hour About STLHD FAB STLHD FAB specializes in delivering top-tier commercial construction projects, with a strong focus on safety, quality, and teamwork. We are seeking an experienced and detail-oriented Fabricator/Welder to join our team. This position is integral to the Fabrication of structural and miscellaneous steel components for commercial buildings, ensuring each project meets our high standards. You will ensure the successful fabrication of components, meeting customer demand, production schedules, and quality standards. The Fabrication/Welder will weld, coat, and perform material preparation, ensuring all work is completed in accordance with drawings, specifications, and safety requirements. Job Responsibilities: • Lead by example; lay out fit-up and coordinate welding, cleaning, painting, and fabrication processes to ensure efficient production., • Ensure all fabricated components meet blueprint specifications, material requirements, and quality standards., • Weld, fabricate, and coat, ensuring adherence to safety and operational procedures., • Ensuring all fabrication processes comply with industry standards, welding procedures (AWS D1.1, ASME, etc.), and internal guidelines., • Ensure all welding and coating equipment is adequately maintained, calibrated, and in working order., • Work closely with Fabrication Lead / Forman to review drawings and provide input on fabrication processes and improvements., • Assist in troubleshooting fabrication issues, making necessary adjustments to ensure production goals are met., • Develop and implement process improvements to enhance fabrication efficiency and reduce material waste., • Coordinate preventative maintenance on fabrication tools and equipment to minimize downtime., • Support team members to enhance skills and adherence to quality standards., • Field Installation. Required Qualifications: • 3-5 years of fabrication and welding experience in a manufacturing or industrial environment., • Proficiency in welding techniques such as MIG, TIG, and FCAW, metal fabrication, and coating applications., • Ability to read and interpret blueprints, welding symbols, and fabrication drawings., • Strong understanding of welding codes and standards, including AWS D1.1, ASME, and API., • Familiarity with coating applications, including surface preparation, primer, and finish coatings., • Ability to read, comprehend, and implement detailed drawings, • Ability to lift, carry, push, and pull up to fifty pounds., • Ability to bend, climb, squat, reach, and kneel as required in fabrication environments., • Experience using fabrication tools, power tools, plasma cutters, and welding equipment., • Strong problem-solving skills and the ability to troubleshoot welding and coating defects., • Willingness to work overtime as needed to meet production demands., • Welding certification, such as AWS or ASME, preferred. Why Join STLHD FAB? • Competitive Pay Based on Experience., • Professional Development: Growth opportunities and skill-building in a supportive work environment., • Commitment to Safety: Join a team that prioritizes safety and quality., • Collaborative Culture: Work alongside a team of skilled and dedicated professionals. How to Apply If you’re passionate about fabrication and meet the qualifications, we want to hear from you! Submit your resume and a brief cover letter. Company DescriptionSTLHD Fab is a family driven start-up steel fabrication shop. We fabricate anything from fences to larger structural steel.STLHD Fab is a family driven start-up steel fabrication shop. We fabricate anything from fences to larger structural steel.

Job Description Welder / Fabricator (Night Shift) 2 WEEK PROJECT ONLY!!! Pay: Up to $40/hour (based on experience & certifications) Shift: Night Shift Employment Type: Full-Time MONDAY - FRIDAY 3:30pm-12am Job Summary We are seeking skilled and dedicated Welders to support a team in Mesa, AZ. The ideal candidate will have strong experience in welding and fabrication, with a commitment to safety, precision, and high-quality workmanship. This role involves complex welding tasks across construction and manufacturing projects, working with structural steel and large components in a fast-paced environment where craftsmanship and technical expertise are highly valued. Key Responsibilities • Perform FCAW (Flux-Cored Arc Welding) and SMAW (Stick Welding) on structural steel, • 2G & 3G welding experience, • Weld large beams and metal plates according to project specifications, • Read and interpret blueprints accurately, • Maintain quality and safety standards at all times, • Work collaboratively with shop and field teams to meet production goals Qualifications & Requirements • Must have - AWS D1.1 Structural Steel Welding Certificates, • Must have 2G, 3G welding experience is a must, • Experience with FCAW and SMAW welding processes, • Structural steel welding experience, • Machine shop experience preferred, • Ability to read and understand blueprints (required), • Willingness to work night shift hours Tools & Safety Gear Candidates must provide: • Basic welding tools- Grinder, hood, chipping hammer, • Welding sleeves, • Safety glasses, • Gloves, • Lace-up work boots

Job Description PPS is seeking an experienced Carbon Welder for our pipe fabrication shop in Phoenix. This is a full-time, permanent, direct hire role with a highly competitive starting wage, benefits, and HUGE OT opportunities! Candidates must be able to: • Pass a plate test (open root, hard wire/dual shield) in 3G and 4G positions., • Fit, measure, and read blueprints accurately., • Demonstrate previous experience with pipe welding. Requirements: • Proven experience with MIG welding methods on carbon., • Must be able to work with a variety of materials and tools in all positions, • MUST PASS MIG WELDING TEST!, • Candidate provides own torches, gloves, and hood

Job DescriptionWe are currently seeking experienced welders to join our National Projects team. Our crews work locally in various locations or travel to project sites throughout the country with a large volume of our work located in Southern Arizona. We also have active work opportunities throughout the rest of Arizona, Texas, Oklahoma, New Mexico, Florida, and elsewhere. Much of our work is federal, so employees have the opportunity to earn prevailing wages (Davis Bacon Act) based on their location. Responsibilities. Take charge of all assigned work and maintain a sense of ownership of all scope on-site Walk the site in an observant manner, taking note of hazards and, when appropriate, correcting them accordingly Develop an awareness of the entire project to include other trade work Communicate with fellow crew members, assigned foreman, and with public, customers, or adjacent trade crews when necessary Use various welding methods to create new piping systems and repair existing ones Requirements. Be able to test out in accordance with ASME Section IX and weld pipe in the 6g position

Job DescriptionRSCS is a full-service Commercial and Industrial Refrigeration Construction and Service company specializing in the design, installation, and maintenance of industrial ammonia and CO₂ refrigeration systems. RSCS has been in business for over 25 years and services customers across 10 states throughout the western USA. We believe in the pursuit of service excellence. Treating employees and customers as family and striving toward continual growth and improvement lie at the heart of RSCS core values. About the Opportunity RSCS is looking for experienced Pipe Welders to join our Refrigeration Construction team. This is a traveling field position for dependable welders who take pride in quality workmanship, understand mechanical construction environments, and are willing to support refrigeration construction projects in the shop and in the field. This is not an entry-level position. Qualified candidates must have hands-on pipe welding experience, strong attention to detail, safe work habits, and the ability to work independently while contributing to a professional construction crew. The successful candidate will perform pipe welding for industrial refrigeration construction projects, including ammonia and CO₂ refrigeration systems. This role requires welding skill, the ability to read drawings, a dependable work ethic, and the flexibility to travel as needed based on project demands. RequirementsWhat You’ll Do • Perform pipe welding for commercial and industrial refrigeration construction projects, • Complete welding work in both shop and field environments, • Perform 6G position welding, • Perform Stick welding using 6010 and 7018 electrodes, • Perform TIG welding on stainless steel with precision and quality, • Weld carbon steel and stainless steel piping used in industrial refrigeration systems, • Work with small bore to large bore pipe sizes, • Read and interpret blueprints, schematics, drawings, and welding symbols, • Support pipe fitting, layout, fabrication, and installation work as needed, • Work safely around refrigeration systems, construction sites, tools, equipment, and materials, • Ensure welds meet RSCS quality standards, project requirements, and applicable safety expectations, • Work independently and as part of a crew to complete projects efficiently, • Communicate clearly with foremen, superintendents, project managers, and team members, • Maintain a dependable, professional, and safety-minded approach on every job, • Travel as required, including assignments on short notice What We’re Looking For Qualified candidates should have: • 3–5 years of experience as a Pipe Welder in industrial refrigeration, mechanical construction, or related pipe welding work, • Industrial ammonia refrigeration welding experience preferred, • CO₂ refrigeration system experience preferred, • Proficiency in 6G position welding, • Experience with Stick welding, including 6010 and 7018 electrodes, • TIG welding experience, especially with stainless steel, • Experience welding carbon steel and stainless steel pipe, • Ability to work with small bore to large bore pipe sizes, • Pipe fitting and layout knowledge preferred, • Ability to read and interpret blueprints, technical drawings, schematics, and welding symbols, • Strong attention to detail and commitment to quality workmanship, • Safe work habits and ability to follow jobsite safety expectations, • Dependable, self-motivated, organized, and able to work with limited supervision, • Ability to work well with foremen, superintendents, project managers, and field crews, • Clean driving record, • Willingness to travel as needed, including short-notice assignments Preferred Experience • Industrial ammonia refrigeration construction experience, • CO₂ refrigeration construction experience, • Experience working in cold storage, food processing, distribution, manufacturing, or industrial refrigeration environments, • Pipe fitting and layout experience, • Rigging experience, • OSHA training or other safety certifications, • Experience supporting traveling construction crews Benefits What We Offer RSCS offers a strong career opportunity for skilled tradespeople who want to grow with a company that values quality workmanship, safety, teamwork, and long-term development. We offer: • Competitive hourly pay based on experience, • Career advancement and training opportunities, • Medical, dental, vision, and prescription drug insurance, • Paid holidays and PTO, • Per diem when traveling, when applicable, • Company-covered travel expenses when applicable, • Long-term opportunity with a company that invests in skilled tradespeople Compensation This Pipe Welder position pays $25–$40 per hour , depending on verified experience, welding skill level, refrigeration or mechanical construction background, travel requirements, and overall fit for the role. This is a field welder position on the RSCS construction team. Starting pay will be discussed during the interview process and determined based on the candidate’s experience, qualifications, and ability to meet the needs of the position. Important Notes RSCS does NOT sponsor employees from outside the United States. Relocation is NOT offered for this position. Please note: We do not accept unsolicited resumes or candidate information from third-party organizations or agencies. Please do not contact anyone in our organization. Any unsolicited information sent to us will be considered the property of RSCS/MRC and will not obligate us to pay any fees if we hire a candidate referred by such an organization. Check out all of our career opportunities at: www.refrigerationsystems.biz/job-openings

Job Description Stainless Steel Fabrication and Process Piping Company Seeking Skilled TIG Welder/Pipe Fitter. Growing company with opportunities for advancement. Responsibilities: Stainless steel Tig welding and pipe fitting. Journeyman pipe-fitter/welder wanted. Requirements: -Proficient Tig welding skills -Two years previous experience -Must have valid driver’s license -Pass Drug Test and Background Check -Experience with welding, cutting, and finishing equipment -Be able to carry 50lbs, climb stairs, and work on feet. -Read and understand fabrication drawings. -Wear protective equipment at all times while working -Maintain equipment and keep work area clean and safe -Inspect personal work for accuracy -Follow quality control procedures -Verify proper parts and materials used -Verify dimension and quantities match fabrication drawings -Typical work is Monday through Friday Additional Info: *Welding Certificates Preferred (6G) *Must have general knowledge of standard welding process and practices. *Pipe-Fitting Experience Preferred *Experience with purge welding a big plus. *Pay range $25-$65 per hour DOE *Company paid health benefits available for eligible employees *Company Sponsored 401K *Purge welding experience a plus. Respond with Resume E Tempe Dr Tempe, AZ 85282 Company DescriptionSummit Process Systems specializes in the fabrication and installation of stainless steel process piping systems and equipment in the food, beverage, pharmaceutical, dairy, and brewing industries.Summit Process Systems specializes in the fabrication and installation of stainless steel process piping systems and equipment in the food, beverage, pharmaceutical, dairy, and brewing industries.

Job Description Overview $1,500 Sign On Bonus for Qualified Candidates! Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Phoenix, AZ. Most positions are first shift with a pay scale of $23-28/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Flat/Vertical Carbon Steel Requirements: • Basic Tools for the Trade, • Must Have Welding Certification & Shop Experience, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Facilities Technician III to join us in Phoenix, AZ! The Facilities Technician III performs planned and unplanned maintenance while supporting chemical wastewater treatment operations to ensure safe, reliable, and compliant facility performance. This role applies electrical, plumbing, and mechanical skills to troubleshoot equipment, rebuild pumps, and maintain accurate records using maintenance software. The Technician III works effectively in hazardous or high‑heat environments, follows LOTO procedures, and contributes to operational efficiency through strong critical‑thinking and organizational abilities. Essential Duties and Responsibilities: • Planned PM’s 40%., • Unplanned Pm’s 20%., • Chemical Wastewater Treatment 40%. Other Duties • Off-site travel such as Home Depot or a Machine Shop., • Chemical Wastewater Treatment., • Keeping track of the maintenance software “Limble”., • Make up small blueprints or drawings using a CAD software. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Knowledge, Skills, and Abilities: • 1-3 years of electrical experience., • 1-3 years of plumbing experience., • 1-3 years of working with a maintenance tracking software., • Must have critical thinking and organization skills., • Must be able to work in “hot” work areas or hazardous locations., • Must be able to use a computer and use programs such as Microsoft Word, Outlook email, Excel spreadsheets., • Need to be familiar with LOTO process., • 1-2 years of any type of pump rebuilds or repairs. Educational/Certification Requirement: • High School Diploma (Minimum), • 2-year degree (Preferred) in Electrical, Machining, Welding, Plumbing, HVAC,, • Any 1-year certificate for any trade programs (Preferred) Work Experience Preferred: • 1-2 years in industrial maintenance, • 1-2 years as an electrician, • 1-2 years as a plumber, • 1-2 years as a welder, • 1-3 years as a machinist Physical Demands and Working Conditions: This section is required for compliance with the Americans with Disabilities Acts (ADA) Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Works in a cleanroom environment. Physical Demands: • Ability to kneel, reach, walk, push, pull, and grasp., • Stand for LONG PERIODS of time., • Lift up to 50 lbs. on a consistent basis; sometimes more., • Need to be able to lift at least 50 LBS sometimes more., • Need to be able to work in hot and cold environments., • Need to be able to handle and work around many different types of chemicals daily., • Need to be able to handle and work around hazardous materials such as arsenic and aluminum dust., • Need to be able to work in tight or “confined” spaces., • Work in a cleanroom environment., • Must be able to read and comprehend directions., • Must be able to hear and speak to communicate with co-workers. Accommodations can be made for emergency alerts for any deaf employees. Environmental Exposure: • Required to wear personal protective equipment where applicable., • Subject to frequent interruptions., • Required to wear personal protective equipment where applicable., • May involve exposure to moderate noise levels from printers, faxes, computers, etc. Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Job Description Location: Phoenix, AZ Schedule: Monday – Friday (some weekends/overtime possible) Phone: (602) 268-8873 Website: www.alliedmachineworks.com We are hiring an experienced Welder to perform MIG, TIG, and Stick welding on steel, stainless, and aluminum components. The ideal candidate has experience in both structural and precision welding and is able to read blueprints and fabricate from scratch. Responsibilities: • Perform MIG, TIG, and Stick welding based on project requirements, • Fabricate parts and assemblies using saws, grinders, and layout tools, • Read and interpret blueprints and welding symbols Qualifications: • 3+ years of welding and fabrication experience preferred, • Proficiency with MIG, TIG, and Stick processes, • Ability to weld in all positions and on various materials, • Skilled in layout, fit-up, and blueprint reading How to Apply: • Apply in person at: 438 W. Watkins Rd, Phoenix, AZ 85003, • Email your resume to: info@alliedmachineworks.com, • Visit us online: www.alliedmachineworks.com

Job Description Welder/Fabricator Position Overview Job Title: Welder/Fabricator | Department: Fabrication | Employment Type: Full-time | Location: Tempe, AZ | Reports to: Shop Supervisor / General Manager About Cutters Fabrication Solutions Cutters Fabrication Solutions is a precision sheet metal fabrication shop in Tempe, Arizona. We build custom products end-to-end, from laser cutting and press brake forming through welding, assembly, and finishing. Our work includes custom delivery truck bodies on Ford Transit chassis, steel frames, stainless steel display cases, material handling racks and carts, as well as both custom and production fabrication for outside customers. We run a small, tight-knit team on a day shift only, Monday through Thursday, 7 am to 3 pm, and Friday, 7 am to 12:30 pm, with no nights or weekends. Role Summary We're looking for a skilled Welder/Fabricator who is strong on sheet metal work and comfortable across steel, stainless, and aluminum. You'll weld and fit assemblies directly from CAD drawings and weld, construction, and technical notes, working closely with our engineering tech, supervisor, and assembly team to move jobs from cut parts to finished product. Key Responsibilities • MIG and TIG weld steel, stainless steel, and aluminum sheet and tube assemblies to drawing and spec., • Produce clean, cosmetic-quality welds on display cases, truck bodies, racks, carts, and other fabricated products., • Control heat and distortion on sheet metal, using proper sequencing, fixturing, and technique., • Fit, tack, and weld assemblies from press-brake-formed and laser-cut parts., • Read and interpret CAD drawings, weld symbols, and weld/construction/technical notes to understand each job's requirements., • Prep material by cleaning, grinding, deburring, and positioning parts and fixtures., • Inspect your own welds and finished assemblies for quality, dimensional accuracy, and fit., • Operate laser welding equipment once trained., • Follow all safety procedures, including proper handling of shielding gas and equipment, and report equipment or material issues promptly., • Train across other shop functions to support production flexibility. Qualifications • Hands-on welding experience in a sheet metal fabrication or manufacturing environment., • Strong MIG and TIG skills across steel, stainless, and aluminum; a significant portion of the TIG work may be aluminum., • Experience welding sheet metal with good distortion control., • Ability to read and interpret fabrication drawings and weld symbols., • Laser welding experience is a plus., • Attention to detail, pride in cosmetic weld quality, and a safety-first mindset., • Reliable, team-oriented, and adaptable to shifting production priorities. Benefits • Health, dental, vision, and life insurance, • Retirement savings plan, • Paid time off, • 4-day work week, no nights or weekends, • Cross-training and skill development across the shop Why Join Cutters Fabrication Solutions? You'll join a small, hands-on team where craftsmanship shows in every finished truck body, rack, and assembly that leaves our floor. If you take pride in clean welds, want variety in your work, and value a consistent day-shift schedule, this is a strong fit. Apply today. Cutters Fabrication is an Equal Opportunity Employer and encourages applications from qualified individuals regardless of race, religion, national origin, sexual orientation, gender, disability, or any other category protected by law. Monday through Thursday, 7 am to 3 pm, and Friday, 7 am to 12:30 pm, with no nights or weekends Minimum of 40 hours per week

Job Description Overview A growing structural and miscellaneous steel fabrication company is seeking an experienced Fitter/Welder to join its fabrication shop in Arizona. The company specializes in structural steel fabrication and erection for commercial construction projects and is known for maintaining a strong safety culture and collaborative team environment. This is a full-time shop-based role offering steady, year-round work in a fast-paced fabrication environment. The company values skilled professionals who take pride in craftsmanship, work efficiently to meet deadlines, and contribute positively to a hardworking team culture. The Role The Fitter/Welder will be responsible for fitting, laying out, and welding structural steel components according to shop drawings and welding specifications. Success in this role means producing high-quality welds, maintaining strong productivity standards, and ensuring all work aligns with safety and quality requirements. This role works closely with fabrication shop teams to ensure accurate fit-up, proper welding procedures, and efficient production of structural steel components. Responsibilities • Perform layout and fit-up of structural steel components according to shop drawings., • Interpret fabrication drawings and plans to ensure accurate assembly., • Set up welding equipment and adjust machine settings as required during welding operations., • Execute welds in accordance with AWS D1.1 welding standards., • Inspect fit-up for full penetration welds and ensure compliance with quality standards., • Maintain clean welds free from inclusions, undercut, or porosity., • Grind, bevel, and clean weld areas as required to prepare materials for fabrication., • Maintain welding equipment and ensure tools are properly stored and maintained. Requirements • 3–5 years of experience in structural steel fitting, layout, and welding., • Experience with Flux Cored welding processes., • Ability to read and interpret shop drawings and fabrication plans., • Strong focus on safety and adherence to shop procedures., • Ability to pass in-shop layout and fit-up testing., • Must provide personal welding gear for weld testing (hood, gloves, jacket)., • Professional working proficiency in English., • Ability to pass background check and drug screening. Nice to Have • Experience with MIG welding using solid core gas-shielded wire., • Experience welding mild steel over 1.5" thickness., • OSHA 10 or OSHA 30 certification. Salary Depending on experience, with advancement opportunities following the first 90 days. Location Arizona, Full-time fabrication shop role (Monday–Friday). Benefits • Full benefits package including PTO and sick leave, • 401(k) retirement plan, • Financial education resources, • Employee appreciation events and giveaways, • Birthday and work anniversaries, • Opportunities for advancement and long-term career growth

Job Description We are seeking a Structural Steel Fabricators / Fitters / Welders / Shop Foreman's to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance, • Able to read / understand blue prints, • Able to read / understand weld symbols, • Able to read / understand W.P.S’s, • Able to pass 1” 3G FCAW test Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload Top pay / Good benefits Must be willing to work weekends if needed Hiring for all shifts 04:00 – 12:00 12:00 – 20:00 20:00 – 04:00 Company DescriptionSkyline Steel, Inc. was founded in 1983 as a steel building contractor specializing in covered parking structures. Rick Dancer, President of Skyline Steel since 1987, found that subcontracting portions of the work increased costs and decreased their control over scheduling of all metal building projects. Faced with this challenge, Skyline Steel set out to perform each task in the process. They gained more equipment and specialists for each phase of the structural steel building process. Skyline Steel became the first company in the southwest to provide complete covered parking structures Soon, Skyline Steel was building anything from airplane hangers to manufacturing sheds. By 1992, they dominated this segment of the steel building industry and began to take on commercial metal buildings. The commercial building segment is now the largest division in the company and provides the same full service fabrication and erection. Skyline has advanced to the company it is today by fabrication & erection of Carport's, turnkey Solar Carports & turnkey Solar Super Structures & Heavy Structural/Misc Steel Buildings.Skyline Steel, Inc. was founded in 1983 as a steel building contractor specializing in covered parking structures. Rick Dancer, President of Skyline Steel since 1987, found that subcontracting portions of the work increased costs and decreased their control over scheduling of all metal building projects.\r\n\r\nFaced with this challenge, Skyline Steel set out to perform each task in the process. They gained more equipment and specialists for each phase of the structural steel building process. Skyline Steel became the first company in the southwest to provide complete covered parking structures\r\n\r\nSoon, Skyline Steel was building anything from airplane hangers to manufacturing sheds. By 1992, they dominated this segment of the steel building industry and began to take on commercial metal buildings. The commercial building segment is now the largest division in the company and provides the same full service fabrication and erection.\r\n\r\nSkyline has advanced to the company it is today by fabrication & erection of Carport's, turnkey Solar Carports & turnkey Solar Super Structures & Heavy Structural/Misc Steel Buildings.

Job Description NCW is hiring for Welders - We are looking for experienced welders with a current SMAW 6-inch, 6G Carbon Steel Stick Welding certification. Candidates must be able to read welding drawings, perform high-quality welds, follow all safety standards, and work effectively in an industrial environment. Reliable transportation and the ability to pass pre-employment requirements are required.

Job DescriptionWelder is responsible for fabricating, fitting, assembling, and welding metal components and structures according to blueprints, drawings, and specifications. This role requires proficiency in welding techniques, metal fabrication processes, and the safe operation of fabrication equipment.Essential Duties and Responsibilities • Perform MIG, TIG, Flux-Core, and Stick welding as required., • Read and interpret blueprints, shop drawings, welding symbols, and work orders., • Measure, cut, fit, and assemble metal components to specification., • Operate fabrication equipment including saws, grinders, plasma cutters, drill presses, ironworkers, and related shop equipment., • Fabricate and repair metal products, structural components, and custom assemblies., • Inspect completed welds to ensure quality, strength, and compliance with specifications., • Maintain accurate measurements and tolerances throughout fabrication projects., • Perform layout and fit-up work prior to welding., • Follow all company safety procedures and OSHA regulations., • Maintain a clean, organized, and safe work environment., • Communicate effectively with supervisors, project managers, and team members regarding project requirements and timelines., • Assist with loading, unloading, and material handling as needed.Qualifications, • Experience in welding and metal fabrication., • Ability to read and interpret blueprints and technical drawings., • Knowledge of welding symbols and fabrication practices., • Experience working with carbon steel, stainless steel, and aluminum., • Ability to safely operate fabrication tools and equipment., • Strong attention to detail and workmanship., • Ability to work independently and as part of a team., • Reliable attendance and strong work ethic.Physical Requirements, • Ability to stand, bend, kneel, crouch, and lift throughout the workday., • Ability to lift and move materials as required., • Ability to work in a fabrication shop environment with exposure to heat, noise, dust, and welding fumes., • Ability to wear required personal protective equipment (PPE).Work Environment, • Fabrication and manufacturing shop environment., • Exposure to welding equipment, fabrication machinery, and industrial materials., • Compliance with all safety and quality standards is required.

Job Description Welder/Fabricator Fire Training Structures has been a leading-edge manufacturer of quality fire training simulators both domestically and internationally. As we continue to expand, we are looking for an experienced Welder to join our dedicated FTS team. You will be responsible for welding and fabricating storage containers and other structures in our shop and on job sites. If you are someone who enjoys solving problems, working efficiently, and taking pride in delivering quality work, this is the job for you! Key Responsibilities: • Perform MIG (GMAW) welding to fabricate and repair storage containers and related structures., • Read and interpret blueprints, measurements, work orders, and fabrication instructions., • Operate welding equipment, fabrication tools, power tools, and operational machinery safely and efficiently., • Repair structural damage, install modifications, and complete custom fabrication projects as assigned., • Inspect completed work to ensure quality standards, structural integrity, and operational functionality., • Ensure all welds meet quality standards and pass AWS 3G and 4G weld tests., • Maintain clean and organized fabrication, welding, and operational work areas., • Follow company safety procedures, OSHA standards, and operational guidelines., • Coordinate with shop personnel, service technicians, and management regarding fabrication priorities and operational needs., • Assist with inventory usage, material organization, and equipment maintenance., • Report equipment concerns, material shortages, and operational issues to management., • Perform additional duties assigned by management. Requirements: • Prior experience with MIG (GMAW) welding., • Ability to pass AWS 3G and 4G weld tests., • Knowledge and experience with basic shop equipment (ironworker, brake, grinder, drill press, etc.)., • Clean record and valid driver’s license with reliable transportation., • Ability to lift to 50 lbs., • Strong problem-solving skills and the ability to work independently with minimal supervision., • Willingness to work both in the shop and at job sites, including outdoor work during the summer months., • Professional demeanor and the ability to collaborate effectively with teammates. Benefits: • Competitive salary and growth opportunities., • Comprehensive benefits package including medical, dental, vision, and life insurance., • 401(k), • Paid time off, Sick time, and paid holidays annually. Job Type: Full-time, Onsite. Not a Remote Position Main Office Location: 1005 N 50th St, Phoenix, AZ 85008 Equal Opportunity Employer: Fire Training Structure LLC is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to providing equal employment opportunities to all employees and applicants. We encourage and love to hire veterans, military experience welcome! If you’re ready to join a winning team and make an impact, apply today! We look forward to welcoming you aboard.