Trabajos welder en Tampa, FloridaCrear alertas

Job Description Essential Functions: Employee must be able to produce acceptable groove welds on code and non-code work in the flat, vertical and horizontal positions and produce acceptable fillet welds on code and non-code work in the flat, horizontal and vertical positions mainly utilizing the FCAW process. Employee must have at least 3 years’ experience in, GMAW, FCAW and SMAW welding processes. Employee must be able to pass standard fillet break tests and bend tests on groove welds and to be trained and certify in multiple positions and processes including welding on fracture critical materials. Employee must be experienced in the use of grinders and other hand and power tools normally used in the welding industry. Job requires being able to work in an open-air environment during many types of weather conditions. This is a physically intensive job that many hours of standing along with stooping, bending, lifting and reaching. Employees are required to report to work able to perform their duties in a drug free state. Job requires a good level of hearing and vision for both the employee’s safety as well as the safety of those working around the employee. Report to work on time and complete entire shift. Must exhibit safety values consistent with State and Federal rules and regulations as well as adherence to the companies’ safety policies. Must maintain a clean and safe work area. Performs work as part of a team and must have an attitude that allows the employee to cohesively belong to the team effort. Must be able to listen attentively to supervision and follow direction accurately and timely. Must be able to learn from supervision, mentors and day to day work practices in a timely and accurate manner. Employees must develop to, and maintain, the companies’ safety and quality standards. The position requires good accurate communication skills in both directions listening to supervision as well as communicating back to supervision. Powered by JazzHR VTvCqy1j1B

Job DescriptionHUTCO, INC. Position: 1st Class Structural Welder Job Location: Tampa, FL. Hutco Branch: Tampa, FL. Rate of Pay: $29 to $29 per hour and $120.00 Daily Per Diem for those who qualify DESCRIPTION: Currently seeking 1st class Structural Welder to work in Tampa, FL. REQUIREMENTS: • Must have working history as a 1st class Welder or six months to a year of experience as a 2nd class Welder., • Minimum ability to read and write. Preferred: High School Diploma, GED, or Trade School Diploma ESSENTIAL JOB FUNCTIONS: • Enter and work in internally confined spaces., • Enter manholes with an inside diameter of 18”., • Manipulate and transport loads of up to 50 pounds over distances of up to 200 feet, approximately 1 to 6 times during each 8 hour shift., • Manipulate and operate all machines and tools essential to the performance of the position of Welder., • Traverse gangways and scaffolding at varying heights., • Traverse and negotiate uneven heights between dock and vessel., • Traverse and negotiate uneven surfaces., • Maneuver around piping obstructions and web frames., • Ascend and work at heights of up to 30 feet., • Stooping, squatting, twisting, kneeling, and reaching. BENEFITS: A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include: • Medical / Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Accidental Death & Dismemberment Benefit CONTACT HUTCO TODAY! Apply ONLINE or at the Tampa Branch: 2603 N 10th St. Tampa, FL. 33605 Or call us at (813) 221-0123 Contact: Doug Sernka or Nancy Castro ncastro@hutcoinc.com Se habla Espanol Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Job DescriptionStructural Welder Needed in Cape Canaveral Florida! $30-32/hour + $125 Per Diem located in Cape Canaveral, Florida! Job Description: This role focuses on welding and fabricating launch hardware used in cutting-edge spaceflight applications. You will perform high-quality structural welding on carbon steel, stainless steel, and aluminum using multiple welding processes, while working from engineering drawings and specifications. The position requires strong technical welding skills, attention to detail, and the ability to collaborate closely with leads and team members to support efficient, precise, and safe production of mission-critical hardware. Responsibilities: • Perform welding using flux cored arc welding (FCAW), gas metal arc welding (GMAW), and shielded metal arc welding (SMAW) on carbon steel, stainless steel, and aluminum structural shapes, tubing, and plates., • Cut, trim, fit, and fabricate weldments to specified dimensions using standard tools, materials, and techniques common to the welding trade., • Build and assemble structural and pipe components in accordance with engineering drawings, weld symbols, and fabrication requirements., • Collaborate with the lead welder to determine and verify appropriate weld procedures, base materials, filler materials, and rod sizes for each project., • Review and interpret engineering drawings, blueprints, and specifications to plan welding operations, including situations where detailed procedural information is not provided., • Inspect welds visually for quality, accuracy, and adherence to applicable codes and internal standards, and make necessary adjustments to improve results., • Contribute to continuous improvement by seeking ways to improve operations, reduce turnaround times, and streamline work processes., • Work cooperatively with other welders, fitters, and support staff to maintain an efficient, safe, and effective work environment., • Perform other related duties as assigned to support production schedules, team objectives, and operational needs.Job Type & Location This is a Contract position based out of Tampa, FL. Pay and Benefits The pay range for this position is $30.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Jul 31, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionEnjoy a 3-day weekend every week while working with a growing manufacturing company in Tampa. We are hiring experienced Aluminum Welders with MIG and TIG welding experience for a full-time opportunity offering weekly pay, steady hours, and long-term career growth. Aluminum Welder (MIG / TIG) Location: Tampa, FL Pay: $22.00 per hour Schedule: Monday-Thursday | 6:00 AM - 4:30 PM Job Description • Perform MIG and TIG welding on aluminum components and assemblies, • Read and interpret blueprints, fabrication drawings, and work orders, • Fit, align, and assemble metal parts according to specifications, • Grind, drill, and prepare materials before and after welding, • Inspect finished welds for quality and accuracy, • Operate welding equipment and fabrication tools safely, • Maintain a clean and safe work environment, • Meet production and quality standards Qualifications • Previous aluminum MIG and TIG welding experience required, • Ability to read blueprints and fabrication drawings required, • Previous welding, fabrication, or manufacturing experience required, • Strong attention to detail and quality workmanship, • Ability to safely operate welding equipment and fabrication tools, • Reliable attendance and strong work ethic required Apply Today If you are an experienced Aluminum Welder looking for a full-time opportunity with a 4-day work week and weekly pay, apply today at www.alliancewf.com

Job Description Gulf Marine Repair of Tampa, FL is looking to hire full-time Structural Welders. These positions start at $24.45/hour. We also offer generous benefits, including 2 medical plans, 2 dental plans, vision, a 401(k) plan with a company match, term life, AD & D, disability, a cancer policy, an employee assistance program (EAP), and more. If this sounds like the right opportunity for you in the shipyard industry, consider applying today! Essential Functions OPEN ROOT TEST • Must pass all three (3) positions - Vertical, Horizontal, and Overhead - flux core and stick, • Must be able to obtain a Transportation Worker Identification Credential (TWIC) card. Welder Test Instructions, Procedures, and Requirements You will be required to complete an open-root weld test on a 3/8" plate with a 1/8" gap for both SMAW (1/8" 7018 rods) and FCAW (flux-core) processes. Examples of an acceptable root pass, cap, and back gouge are provided for your reference. Instructions to complete both tests are outlined below. You MUST have the following proper equipment to complete your test: Chipping Hammer, Gloves, 4" Grinder, Hood, Safety Glasses, Steel-toed Boots, Welding Stinger (Whip - your stinger/whip should have a 5/8" quick connect end), Wire Brush and Wire Pliers. Non-flammable arms and upper body coverage attire (leathers, denim jacket, long sleeve shirt) is required. Step 1: Coupons are laser cut (NO grinding required). You only need to wire wheel any rust or mill scale from the face of your coupon. Your test administrator will set up your coupons in a jig for proper gap placement. A 1/8 " gap is required. You will proceed by tacking the backing tabs onto each end of your plates. Step 2: On the backside of your coupons, you will need to apply weldment (as shown below) to your backing tabs to ensure that your coupons do not separate as you are welding. Place four (4) tack welds on each coupon ONLY in the specified areas. Step 3: Once your coupons are tacked together you are required to mount your coupons to the welding test booth jig. DO NOT tack coupons on the jig using the nut and bolt attachment located on the jig. One coupon will be administered at a time in the horizontal position, the vertical, and the overhead position. You may NOT remove your coupon once it has been mounted until directed to do so by your test administrator. For your comfort, you may move the bar up and down for each phase of your test. Step 4: Once your coupon is mounted you may begin your test. You will receive one coupon at a time there are a total of (six coupons). Then you will be required to run your root pass. Stop and notify the test administrator so that your root pass can be inspected. Your root pass must be even and consistent with no porosity, slag inclusion, undercut, or lack of penetration. You must maintain a continuous weld puddle during your root pass without whipping the electrode during the SMAW process. In addition, when using the flux-core process, you must maintain a continuous weld puddle without using the "popping" action from your MIG gun when making your root pass. You may NOT "pop" your gun on your flux-core vertical or overhead test. All welds must be completed by striking an arc and continuing through until completely welded or until your electrode is expended. "Whipping" or "popping" your weld will be grounds for failure, and you will NOT be allowed to complete your test. You can grind your stop and start of your root pass. Step 5: Once your root pass is complete and your coupon has been checked by the test administrator, you may continue to put in your filler pass to flush your weld out making sure you leave a 1/16" tolerance at the bevel edge of the test plate for the cap. You may put a two- or three-pass stringer cap when using either process. You may NOT weave your cap pass when using either process. Notify your test administrator that you have finished with your cap before removing your coupons from the bar. Step 6: You are required to back-gouge your test plates. You are to remove each process, horizontal, vertical, and overhead, and they are to be placed in the same position in the gouging booth which will be shown to you. You will be instructed on the requirements of the process and shown "acceptable and non-acceptable" test coupons. It is a requirement that you must pass this process. Once your plates have been gouged, notify your test administrator for inspection and approval. Step 7: After your coupons have been back-gouged you will be allowed to clean up any slag left on the face of your back-gouge. You may NOT grind the inside of the back-gouge wire wheel ONLY. Then they are to be re-mounted back on the bar in your test booth. The horizontal, vertical, and overhead coupons will be mounted in the same position they were prior to removal. Prior to capping, make sure your weldment is flushed. If needed, use a two- or three-pass cap on all test plates. Once complete, notify your test administrator that you are finished with your test. Knowledge, Skills, and Abilities • FCAW Welding Process, • SMAW Welding Process, • Arc Gouging TEST RESULTS DETERMINE EMPLOYABILITY Education and Experience • High School Diploma or Equivalent (Preferred), • MINIMUM of three (3) years of SHIPYARD WELDING experience - REQUIRED E-Verify and Drug-Free Workplace READY TO JOIN OUR TEAM? We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this machining job in the shipyard industry, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605 Job Posted by ApplicantPro

Job Description We are looking for a skilled, full-time TIG Welder with experience welding stainless steel, bronze, Nibral, and aluminum. While welding is the primary focus of this position, we’re looking for someone who is willing to be part of the entire repair process. Responsibilities include preparing lower units, performing TIG welding, sandblasting, assisting with polishing, and painting as needed. We’re a small, team-oriented business, so everyone pitches in where needed. If you enjoy taking ownership of your work, learning new skills, and being part of a team that works together to get the job done, you’ll fit right in. We’re looking for someone who is self-motivated, dependable, and takes pride in producing high-quality work. If you’re driven, have a strong work ethic, and are looking for a career with opportunities to grow, we’d love to hear from you. If you prefer a highly structured environment with constant supervision, this position likely won’t be the right fit. We value team members who can work independently, solve problems, and take initiative. Pay is based on experience, capability, and reliability.

Job Description THIS IS A SECOND SHIFT POSTIOIN JOB SUMMARY: This position operates and maintains welding and fabricating equipment. PRIMARY REPONSIBILITIES: • Operation of various types of welding and fabricating equipment., • Gage and inspect parts as required., • Palletize finished parts and perform quality documentation sign-offs as required., • Support production operations by ensuring the smooth flow of material from operation to operation., • Follow company safety policies and procedures., • Other duties as assigned. JOB REQUIREMENTS: • Education level: High School Diploma/GED with some college or technical trade school to support qualifications including welding certifications., • Experience: Must have mig welding experience with materials including carbon, stainless steel and aluminum., • IMP is a drug-free workplace. Employees must be able to pass a pre-employment, fit-for-duty physical including a drug screen., • Mechanical skills/aptitude., • Basic computer skills., • Read tape measure to the 1/16th of 1 inch., • Add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Compute rate, ratio, and percent and draw/interpret bar graphs., • Must be able to follow company safety and quality control policies and procedures., • Must be a team player receptive to change and cross functional training., • Willingness to work a flexible schedule including overtime. WORK ENVIRONMENT: • Regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear., • Must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • Regularly exposed to moving mechanical parts., • At risk of electrical shock and vibration., • Regularly exposed to fumes or airborne particles., • Occasionally exposed to wet and/or humid conditions and/or extreme cold and extreme heat., • The noise level in the work environment is usually loud. ADDITIONAL INFORMATION: In compliance with the Drug-Free Workplace Act of 1988, IMP has a longstanding commitment to provide a safe, quality-oriented and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of IMP employees and to the security of the company's equipment and facilities. For these reasons, IMP is committed to the elimination of drug and alcohol use and misuse in the workplace. IMP does not discriminate in the provision of employment opportunities, benefits or privileges; to create discriminatory work conditions; or to use discriminatory evaluative standards in employment if the basis of that discriminatory treatment is, in whole or in part, the person's race (including hairstyle/texture), color, national origin, age, religion, disability status, sex, sexual orientation, gender identity or expression, genetic information or marital status. Discrimination of this kind may also be strictly prohibited by a variety of federal, state and local laws, including Title VII of the Civil Rights Act of 1964, the Age Discrimination Act of 1967 and the Americans with Disabilities Act of 1990. This policy is intended to comply with the prohibitions stated in these anti-discrimination laws. 2nd Shift: 3:30pm-2am (includes shift differential, $1.50 p/hour)

Job DescriptionPipefitter / Pipe welder ($125 PER DIEM) Job Details • We are hiring pipefitters and pipe welders for a long term project, • You will be working in Cape Canaveral, FL, • Must have previous industrial or shipyard experience, • Pay is $35 on days and $37 on nights, • You will be working 60 to 80 hours a week, • Per diem is $125 a day, • If interested apply now and we will call you this same week Job Description This role focuses on fabricating and maintaining structural, hydraulic, and fluid piping systems for launch hardware, including Schedule 10 pipe on launch mounts and towers. You will perform multiple welding processes at times in demanding, high-altitude conditions while working from engineering drawings and strict specifications. The position requires strong technical welding expertise, precise fabrication skills, and the ability to collaborate with lead welders to ensure high-quality, code-compliant welds on critical hardware. Responsibilities • Fabricate and maintain structural, hydraulic, and fluid systems using Schedule 10 stainless steel and carbon steel pipe on launch mounts and towers., • Perform Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), Shielded Metal Arc Welding (SMAW), and Gas Tungsten Arc Welding (GTAW) on carbon steel, stainless steel, and aluminum structural shapes and tubing., • Cut, trim, fit, and fabricate weldments to precise dimensions using standard trade tools and flame-cutting equipment., • Review and interpret engineering drawings and specifications to plan welding operations and determine appropriate weld procedures and filler materials., • Work closely with lead welders to assess proper weld procedures, rod sizes, and techniques for various materials and joint configurations., • Prepare joints and set up welds in accordance with applicable codes and standards such as AWS and ASME Section IX., • Execute weld tests including 5G 2" stainless steel Schedule 10 GTAW root-only welds with 2–4 tacks and 6G 2.75" monster coupon GTAW welds, adhering to specified gap, reinforcement, and undercut tolerances., • Inspect completed welds for quality, ensuring compliance with dimensional tolerances, reinforcement limits, and undercut requirements., • Maintain a safe work area, especially when working at heights or on complex launch structures, following all safety procedures and best practices., • Use trade tools, welding equipment, and fabrication machinery responsibly, performing basic maintenance and reporting issues as needed. Essential Skills • 5+ years of professional experience in GTAW (TIG) welding with Schedule 10 stainless steel pipe and/or Schedule 10 carbon steel pipe., • Proficiency in Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW/MIG), Shielded Metal Arc Welding (SMAW/arc welding), and Gas Tungsten Arc Welding (GTAW/TIG)., • Demonstrated pipe welding experience, including work on complex test coupons such as 5G and 6G monster coupons., • Previous welding qualifications in accordance with one or more governing codes, such as AWS D1.1, AWS D1.2, AWS D1.6, or ASME Section IX., • Strong blueprint reading and interpretation skills for welding and fabrication projects., • Ability to cut, trim, fit, and fabricate weldments accurately using standard trade tools and flame-cutting equipment., • Experience fitting and welding stainless steel and carbon steel piping and structural components., • Capability to meet specific weld test criteria, including maximum 1/4" gap, 5/32" reinforcement, and 1/32" undercut., • At least 1+ year of manufacturing experience utilizing FCAW or GTAW on Schedule 10 piping (or 5+ years for higher-level roles). Additional Skills & Qualifications • Experience working on launch hardware, spacecraft components, or similarly complex, high-precision structures., • Experience in fabrication and welding within industrial, aerospace, or advanced manufacturing environments., • Familiarity with welding and fabrication of stainless steel, carbon steel, and aluminum structural shapes and tubing., • Strong attention to detail and commitment to high-quality, code-compliant welds., • Ability to collaborate effectively with lead welders, engineers, and other fabrication team members., • Comfort working at heights or in elevated positions when required for launch mount and tower work. Why Work Here? You join a mission-driven organization that builds hardware for cutting-edge launch systems in a climate-controlled, state-of-the-art facility. The company offers strong name recognition, a compelling long-term vision, and competitive compensation structures, including per diem support for eligible assignments. You benefit from working with advanced technology, clear technical standards, and a culture that values craftsmanship, precision, and continuous improvement. Work Environment The role is based in a climate-controlled, state-of-the-art fabrication and welding facility that supports launch hardware production. You typically work a schedule of five 12-hour shifts Monday through Friday, with an additional 8–10 hours as needed, which may involve extended or overtime shifts. The environment includes advanced welding equipment, flame-cutting tools, and fabrication machinery, and may require work at height on launch mounts and towers. Appropriate industrial workwear and personal protective equipment are expected to ensure safety and compliance with shop and field conditions. Job Type & Location This is a Contract position based out of Tampa, FL. Pay and Benefits The pay range for this position is $35.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Aug 4, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Duties and Responsibilities: • Welding, fabricating, repairing, and maintaining all equipment, both rented and owned., • Operating all authorized and required welding equipment., • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Prepares, assembles, and tack welds parts that need to be welded., • Following and upholding all required safety rules and regulations., • Recognizing and correcting safety hazards., • General housekeeping duties relating to equipment, materials, and cleaning of work area., • Supporting any other shop activities, as required., • Check over finished work to ensure that it's within the desired tolerances., • Maintain all of the tools and equipment assigned to you. Knowledge, Skills and Abilities: • Thorough understanding of machines and tools used for welding., • Ability to read and understand the welding instructions from drawings, models, and blueprints., • Ability to mark-up these construction drawings with as-built information., • Excellent ability to read and listen to assignments given in a variety of forms., • Basic understanding of mathematics, as related to welding assignments., • Ability to work in different environments (i.e. inside, outside, very hot, very cold, etc.). Education and Experience Requirements: 5+ years of welding experience Physical Requirements: • Prolonged periods (8+ hours) of standing and walking while wearing all required PPE., • Must be able to lift and carry up to 50 pounds., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.

Job Description Job SummaryWe are seeking a skilled Welder/Fabricator to join our team. In this position, you will interpret blueprints and drawings to accurately weld structural components and parts. This is an integral part of the construction process, as it provides a strong infrastructure foundation. The ideal candidate is a hard worker with great attention to detail and proven experience as a Welder and more importantly fabrication. Responsibilities • Read and interpret blueprints, drawings, and schematics to product specifications, • Plan layout and measurements of structural components, • Interpret requirements to select the most appropriate welding equipment for the job, • Operate angle grinders, calipers, rulers, and other hand and power tools, • Use manual and semi-automatic welding equipment, • CUSTOM FABRICATION IN TIG and MIGQualifications, • Previous experience in Welding, manufacturing, or other related fields., • Familiarity with all metals, stainless steel, steel, aluminum, bronze, copper and others, • Professional Certification (AWS welding certificate) is preferred, • Experience with a variety of welding equipment and tools, • Ability to read and interpret blueprints, schematics, and other technical documents and drawings, • Understanding of all health and safety guidelines, • Attention to detail, • Ability to handle physical workload, • Creative abilities a plus, troubleshooting experience and leadership abilities, • Team player, problem solver and expeditious in fabrication with quality work. Company Description We combine artistic vision with traditional trade to create one-of-a-kind pieces known throughout Florida and the United States. www.rusticsteel.com 3919 N. Highland Ave Tampa, Fl 33603 813.222.0016

Job Description PIPE WELDER ESSENTIAL FUNCTIONS: • Welding in and out of position on various pipe configurations using SMAW and FCAW welding processes., • Work closely with supervisors and pipe fitters to provide solutions to design deficiencies, system breakdowns, equipment malfunctions and other repair situations., • Tear down/repair/repack/reassemble valves in place., • Assess and repair reach-rods, deck actuators, valve handles, valve bodies and bonnets., • Repair sanitary systems aboard vessels., • Work with systems aboard vessels for fresh/potable water., • Work with engine cooling systems., • Repair or renew various other pieces of equipment as warranted. KNOWLEDGE, SKILLS AND ABILITIES: • Successfully pass a 6GR Pipe Welding Test using SMAW and FCAW., • Stainless Steel 6GR Pipe Welding Test will be SMAW., • Follows ABS / USCG pipe welding and fitting requirements, • Assist in all types of valve, reach rod, heat exchanger or other miscellaneous mechanical work, • Will work independently with minimal supervision, • Conflict management, leadership, teambuilding and time management skills will be used, • Attention to detail, organizational, problem solving, analytical, critical thinking and decision making skills will be used EDUCATION AND EXPERIENCE: • High School Diploma or Equivalent, • Two (2) years of pipe welding experience, • Must have tools; employer does not provide tools, • Shipyard Experience is preferred WORK ENVIRONMENT: Outdoors. Work in confined spaces, in the elements, aboard shipyard vessels, in the shop, and travel outside the facilities to other local ports in the area via company truck. HOURS: 40+ hours per week. E-Verify and Drug-Free Workplace LOCAL CANDIDATES PREFERRED, as relocation expenses are NOT covered. Benefits • Two medical plans, • Two dental plans, • Vision plan, • Short-term and long-term disability insurance plans, • Company provided life insurance, • Employee elected supplemental life insurance for employees and family, • Employee Assistance Plan, • Work-site Benefits, • 401(K) plan with company match Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605 Job Posted by ApplicantPro

Job Description THIS IS A SECOND SHIFT POSITION JOB SUMMARY: This position will support all functions of the operation including: • Operation of various types of welding and fabricating equipment., • Ability to fit complex parts for inspection prior to final weld., • Gauge and inspect parts as required., • Palletize finished parts and perform quality documentation sign-offs as required., • Support production operations by ensuring the smooth flow of material from operation to operation., • Active involvement and support of Lean Manufacturing/Continuous Improvement initiatives., • Adhere to 5S practices and maintain a safe, clean and organized work environment., • Work flexible hours and overtime as required. Job Requirements: • Must have mig welding experience with materials including carbon, stainless steel and aluminum., • Blueprint reading and the ability to comprehend engineering drawings, tolerances and general dimensional information., • Capable of fixture design and setup., • Perform quality inspections and follow ISO guidelines for product traceability. Education level: HS Diploma with some college or technical trade school to support qualifications including welding certifications. ADDITIONAL INFORMATION: In compliance with the Drug-Free Workplace Act of 1988, IMP has a longstanding commitment to provide a safe, quality-oriented and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of IMP employees and to the security of the company's equipment and facilities. For these reasons, IMP is committed to the elimination of drug and alcohol use and misuse in the workplace. IMP does not discriminate in the provision of employment opportunities, benefits or privileges; to create discriminatory work conditions; or to use discriminatory evaluative standards in employment if the basis of that discriminatory treatment is, in whole or in part, the person's race (including hairstyle/texture), color, national origin, age, religion, disability status, sex, sexual orientation, gender identity or expression, genetic information or marital status. Discrimination of this kind may also be strictly prohibited by a variety of federal, state and local laws, including Title VII of the Civil Rights Act of 1964, the Age Discrimination Act of 1967 and the Americans with Disabilities Act of 1990. This policy is intended to comply with the prohibitions stated in these anti-discrimination laws. 2nd Shift: 3:30pm-2am (includes shift differential, $1.50 p/hour)

Job Description JOB SUMMARY: This position will support all functions of the operation including: • Operation of various types of welding and fabricating equipment., • Ability to fit complex parts for inspection prior to final weld., • Gauge and inspect parts as required., • Palletize finished parts and perform quality documentation sign-offs as required., • Support production operations by ensuring the smooth flow of material from operation to operation., • Active involvement and support of Lean Manufacturing/Continuous Improvement initiatives., • Adhere to 5S practices and maintain a safe, clean and organized work environment., • Work flexible hours and overtime as required. Job Requirements: • Must have mig welding experience with materials including carbon, stainless steel and aluminum., • Blueprint reading and the ability to comprehend engineering drawings, tolerances and general dimensional information., • Capable of fixture design and setup., • Perform quality inspections and follow ISO guidelines for product traceability. Education level: HS Diploma with some college or technical trade school to support qualifications including welding certifications. ADDITIONAL INFORMATION: In compliance with the Drug-Free Workplace Act of 1988, IMP has a longstanding commitment to provide a safe, quality-oriented and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of IMP employees and to the security of the company's equipment and facilities. For these reasons, IMP is committed to the elimination of drug and alcohol use and misuse in the workplace. IMP does not discriminate in the provision of employment opportunities, benefits or privileges; to create discriminatory work conditions; or to use discriminatory evaluative standards in employment if the basis of that discriminatory treatment is, in whole or in part, the person's race (including hairstyle/texture), color, national origin, age, religion, disability status, sex, sexual orientation, gender identity or expression, genetic information or marital status. Discrimination of this kind may also be strictly prohibited by a variety of federal, state and local laws, including Title VII of the Civil Rights Act of 1964, the Age Discrimination Act of 1967 and the Americans with Disabilities Act of 1990. This policy is intended to comply with the prohibitions stated in these anti-discrimination laws.

Welder – Pembroke, NH | Global Food Processing Equipment Manufacturer | $22–32/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? • Competitive Compensation: Excellent hourly pay (DOE), • 401(k), • Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, • Paid Holidays, PTO, Sick Leave, and Birthday Off, • Stable Employer: No layoffs in decades, even during downturns, • Collaborative Shop Environment: Tight-knit team with mentorship opportunities, • Consistent Day Shift: 7:00am–3:30pm schedule Job Details Key Responsibilities and Duties: • Perform TIG and MIG welding on large stainless steel industrial equipment, • Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards, • Read and interpret blueprints, drawings, and job orders to determine work requirements, • Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems, • Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment, • Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality, • Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: • High school diploma or equivalent (technical training preferred), • Minimum 3 years of TIG and MIG welding experience (stainless steel preferred), • Experience working with thin gauge metals (16 GA or similar), • Ability to read and interpret mechanical blueprints and drawings, • Strong mechanical aptitude and attention to cosmetic weld quality, • Food or pharmaceutical industry background highly preferred, • Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Certified Welder/Pipefitter Combo. CT Mechanical is hiring a Certified Welder/Pipefitter Combo with strong skills in both pipefitting and certified welding techniques. Certified Welder (AWS or ASME)must be able to pass company welding test prior to employment.

Immediate hire for skilled Mig/Tig welders in Tampa, FL. Join a staple in the Tampa Bay community. We are looking to add skilled aluminum welders to the team. Must be proficient at welding aluminum at 1/8". Skilled in Tig and/or Mig of 1/8" aluminum. 2+ years experience. Full benefits including 401K match.

Job Description Bausch + Lomb (NYSE/TSX: BLCO) is a leading global eye health company dedicated to protecting and enhancing the gift of sight for millions of people around the world—from the moment of birth through every phase of life. Our mission is simple, yet powerful: helping you see better, to live better. Our comprehensive portfolio of over 400 products is fully integrated and built to serve our customers across the full spectrum of their eye health needs throughout their lives. Our iconic brand is built on the deep trust and loyalty of our customers established over our 170-year history. We have a significant global research, development, manufacturing and commercial footprint of approximately 13,000 employees and a presence in approximately 100 countries, extending our reach to billions of potential customers across the globe. We have long been associated with many of the most significant advances in eye health, and we believe we are well positioned to continue leading the advancement of eye health in the future. Objectives/Purpose of the Job: Perform facility repairs and maintain production equipment while performing mechanical and electrical repairs. This position is a weekend coverage position and is intended to provide 24/7 coverage to the site. Key Activities/Responsibilities: Process daily work orders and perform upgrades of facility equipment. Troubleshoot and repair control cabinets, variable frequency drives, and main electrical distribution panels. Perform Preventative Maintenance (PM’s) as assigned on scheduled equipment. Assist Utility Department in general repairs and passivation’s. Maintain GMP and SOP training compliance. Support engineering projects. Maintain GMP and safety compliance. Follow procedures and maintain compliance within the respective areas. Abide by LOTO, PPE and good housekeeping procedures. Repair machine parts using general machine shop equipment. Ability to operate a lathe, mill and welder (preferred but not required) Ability to work in a confined space, entry is required. Respirator qualification is required. (Training Provided) Must be capable of working in the aseptic environment (Training Provided) All other duties as assigned. Scope of Position Process daily work orders and preventive maintenance, which includes troubleshooting, repairing and upgrading the production, facility, and lab equipment. Qualifications/Training: On the Job Training provided: • Aseptic Gowning Certification., • Forklift & JLG Certification Qualifications: • HS Diploma/GED required., • Logical approach to troubleshooting and repair of manufacturing and facility equipment., • Minimum of 2 years’ experience for controls and electrical., • Good organizational skills, able to work quickly and under pressure., • Good verbal and written communication skills, • Must be detailed oriented and quality conscious., • Computer skills; Microsoft Office (Word, Excel), • Able to use general tools (hand tools, electrical tools, measuring tools, etc.), • Ability to operate lathe and milling machine (preferred)., • Minimum of 5 years applicable industry experience or technical training. This position may be available in the following location: Tampa, FL. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Job Applicants should be aware of job offer scams perpetrated through the use of the Internet and social media platforms. To learn more please read. Our Benefit Programs:https://www.bausch.com/careers/benefits/ Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. You should be proficient in: • Heavy Equipment Repair, • Equipment Troubleshooting, • Electrical Troubleshooting Skills, • Electrical Troubleshooting, • Troubleshooting Industrial Automation Equipment Machines & technologies you'll use: • Industrial Controls, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Mitsubishi, Schneider Electric), • Conveyor Systems

Job DescriptionField-Erected Tank Project Manager — API Aboveground Storage Tanks Position Summary The Field-Erected Tank Project Manager is responsible for managing API aboveground storage tank projects from contract award through final completion and closeout. This role is focused on field-erected tank construction, repair, alteration, reconstruction, coatings, testing, inspection coordination, and customer turnover. The primary objective is to safely deliver assigned projects on time, within scope, within budget, and in compliance with contract requirements, customer specifications, applicable API standards, AWS welding requirements, project quality requirements, and company safety procedures. This position requires strong field construction experience, technical knowledge of aboveground storage tanks, disciplined project controls, and the ability to coordinate customers, field crews, subcontractors, inspectors, engineers, vendors, QA/QC, safety, procurement, coatings, logistics, and management. Essential Functions Project Management and Execution • Manage assigned field-erected tank projects from contract award through closeout, including kickoff, planning, scheduling, field execution oversight, cost control, invoicing support, testing coordination, documentation, and final turnover., • Develop and maintain project work plans addressing scope, schedule, budget, manpower, equipment, procurement, subcontractors, inspections, testing, coatings, and delivery milestones., • Coordinate internal execution with Field Operations, Engineering, Procurement, QA/QC, Safety, Coatings, Logistics, Accounting, and Executive Management., • Identify project risks, develop mitigation plans, and notify management of issues that may affect safety, schedule, cost, quality, field productivity, subcontractor performance, or customer satisfaction., • Maintain project controls, including status reports, schedule updates, manpower plans, equipment plans, open issue logs, budget updates, committed cost tracking, and forecast-at-completion reporting.API Tank Technical Responsibilities, • Manage API aboveground storage tank projects involving new construction, repairs, alterations, reconstruction, bottom replacement, shell replacement, roof replacement, nozzles, appurtenances, foundations, coatings, and testing., • Apply working knowledge of API 650, API 653, API 620 when applicable, AWS welding requirements, customer specifications, inspection requirements, and project-specific quality plans., • Oversee tank construction activities involving foundation coordination, bottom plate layout, annular plate installation, shell erection, roof installation, structural attachments, nozzle installation, welding, dimensional checks, vacuum box testing, hydrostatic testing, settlement monitoring, coating, and final inspection., • Manage technical requirements involving layout, fit-up, weld sequencing, dimensional tolerances, plumbness, roundness, peaking, banding, settlement limits, anchor bolt coordination, penetrations, reinforcement details, and field modification control., • Resolve technical, field execution, quality, material, schedule, and constructability issues with customers, inspectors, engineers, field supervisors, subcontractors, vendors, and internal management.Field Construction and Site Coordination, • Coordinate field execution with site supervision to ensure work is performed safely, efficiently, and in accordance with approved drawings, specifications, procedures, schedules, and customer requirements., • Support planning for manpower, cranes, scaffolding, welding machines, consumables, temporary facilities, site access, laydown areas, confined space requirements, and other field construction needs., • Coordinate subcontractors and specialty service providers, including foundation contractors, crane providers, scaffold providers, NDE providers, coatings contractors, testing agencies, civil contractors, and transportation providers., • Monitor field productivity, progress, constraints, delays, rework, equipment utilization, subcontractor performance, and customer-driven impacts.Communication, Contract, and Change Management, • Serve as the primary point of contact for the customer and manage expectations throughout the project lifecycle., • Review and understand project contracts, scopes of work, drawings, specifications, schedules, terms and conditions, safety requirements, quality requirements, inspection requirements, testing requirements, and delivery obligations., • Conduct or participate in project kickoff meetings, pre-construction meetings, production meetings, client meetings, safety meetings, field coordination meetings, and issue-resolution meetings., • Prepare, track, and manage RFIs, submittals, change orders, potential change orders, notices, backcharge responses, delay notifications, field change requests, and project correspondence., • Ensure work does not proceed outside the approved contract scope without appropriate customer and management approval of cost, schedule, quality, and contractual impacts., • Maintain organized project records, including contract documents, correspondence, meeting minutes, schedule updates, change logs, procurement logs, subcontractor records, field production updates, QA/QC documentation, testing records, coating records, and closeout documents.Budget, Cost, and Invoicing Management, • Understand and utilize company job cost reporting structures and project management software tools., • Manage project budgets, cost trends, committed costs, subcontractor costs, field labor costs, equipment costs, material costs, projected costs, and forecast-at-completion reporting., • Provide accurate project information to support invoicing, billing milestones, progress billing, retainage requirements, cash recovery, and accounts receivable collection efforts., • Work with Accounting and management to ensure project financial performance is accurately tracked and aligned with contract terms.Procurement, Vendor, and Subcontractor Coordination, • Manage procurement activities for tank plate, structural components, nozzles, appurtenances, anchors, bolts, gaskets, welding consumables, coatings, equipment, subcontracted services, and other project-specific needs., • Review supplier and subcontractor deliverables for schedule impact, technical compliance, quality requirements, documentation requirements, and project risk., • Ensure purchased materials and subcontracted services satisfy project requirements, including material specifications, mill certifications, traceability requirements, testing requirements, coating requirements, and customer documentation requirements.Quality and Safety, • Support and enforce company safety policies, project safety plans, job hazard analyses, confined space procedures, hot work controls, fall protection requirements, crane/lift plans, and customer site requirements., • Coordinate with QA/QC and field supervision to ensure welding procedures, welder qualifications, inspection test plans, NDE requirements, dimensional inspections, vacuum box testing, hydrostatic testing, coating inspections, material traceability, and customer inspection requirements are followed., • Support resolution of nonconformance reports, corrective actions, inspection issues, documentation deficiencies, field repair requirements, and final release requirements., • Ensure final documentation packages are complete, accurate, reviewed, and submitted in accordance with contract and customer requirements.Qualifications, • Bachelor’s degree in Construction Management, Engineering, Business, or related field preferred; equivalent field construction and project management experience will be considered., • 10+ years of experience in project management, field construction, tank construction, industrial construction, steel fabrication, or heavy industrial maintenance preferred., • Direct experience managing API aboveground storage tank projects strongly preferred, including API 650 new tank construction and/or API 653 tank repair, alteration, inspection, or reconstruction work., • Experience with field welding, tank erection sequencing, NDE coordination, hydrostatic testing, vacuum box testing, settlement monitoring, coatings, subcontractor coordination, and customer inspection requirements preferred., • Strong ability to interpret tank drawings, construction drawings, welding details, specifications, codes, schedules, inspection requirements, and contract documents., • Experience coordinating field crews, subcontractors, vendors, inspectors, engineers, safety personnel, QA/QC personnel, and customer representatives required., • Familiarity with API 650, API 653, API 620 when applicable, AWS welding requirements, OSHA requirements, confined space requirements, hot work controls, fall protection, crane/lift planning, and industrial site safety requirements preferred., • Strong leadership, communication, organization, documentation, problem-solving, risk management, and client management skills required., • Project Management Professional certification, API 653 certification, API 650/API 653 training, OSHA training, or equivalent industry certification preferred.Reporting Reports to the Director of Project Management, Field Operations Manager, or designated executive leader. Works closely with Field Superintendents, Project Managers, Safety Manager, QA/QC Manager, Engineering, Procurement, Coatings Manager, Logistics, Accounting, and Executive Management. Standards • Display a professional, ethical, and safety-focused attitude in all work performed for the company., • Maintain confidentiality of all company, customer, project, and commercial information., • Support company culture, safety expectations, quality standards, procedural compliance, accountability, and continuous improvement., • Carry out additional responsibilities as assigned by management in support of company operations. Powered by JazzHR ZFZfAwOSLg

Job DescriptionAISC Complex Fabrication Project Manager — Movable Bridge Experience Position Summary The AISC Complex Fabrication Project Manager is responsible for managing complex structural steel fabrication projects from contract award through final delivery and closeout. This role is focused on AISC-certified complex fabrication involving movable bridge structures, heavy structural assemblies, fracture-critical members, machinery support steel, trunnion/bascule-related fabrication, counterweight structures, and other transportation or infrastructure work requiring a high level of technical coordination and project control. The primary objective is to safely deliver assigned projects on time, within scope, within budget, and in compliance with contract requirements, AISC certification requirements, customer specifications, applicable DOT/AASHTO requirements, AWS welding standards, and company quality and safety procedures. This position requires strong engineering judgment, complex fabrication experience, bridge project documentation experience, change management discipline, and the ability to coordinate effectively with clients, engineers, inspectors, vendors, subcontractors, and internal departments. Essential Functions Project Management and Execution • Manage assigned projects from contract award through closeout, including kickoff, planning, scheduling, budget control, execution oversight, invoicing support, and final closeout., • Develop and maintain project work plans that address project scope, schedule, budget, procurement, production sequencing, inspection requirements, delivery milestones, and customer requirements., • Coordinate internal execution with Detailing, Engineering, Procurement, Shop Operations, QA/QC, Coatings, EHS, Logistics, Field Operations, Accounting, and Executive Management., • Identify project risks, develop mitigation plans, and notify management of issues that may affect schedule, cost, quality, safety, delivery, or customer satisfaction., • Prepare and maintain project controls, including status reports, earned value metrics, schedule updates, open issue logs, risk logs, budget updates, and forecast-at-completion reporting.Movable Bridge and Complex Fabrication Responsibilities, • Manage fabrication projects involving movable bridge components, including bascule, swing, lift, or other mechanically operated bridge systems., • Coordinate fabrication requirements for heavy plate, built-up girders, machinery support frames, trunnion assemblies, counterweight boxes, curved or skewed members, large weldments, fracture-critical components, and tight-tolerance assemblies., • Manage technical requirements involving dimensional control, fit-up, camber, sweep, hole alignment, machining interfaces, match-marking, trial assembly, survey/dimensional verification, and field installation tolerances., • Coordinate shop assembly plans, trial-fit requirements, bolting requirements, welding procedures, NDE requirements, coating hold points, inspection requirements, and shipping configurations., • Resolve technical and fabrication issues with engineers, detailers, inspectors, QA/QC, production teams, vendors, subcontractors, and erection teams.Communication Management, • Serve as the primary point of contact for the client and manage customer expectations throughout the project lifecycle., • Maintain clear communication with clients, vendors, subcontractors, internal departments, inspectors, engineers, and management regarding project status, open issues, required decisions, and potential impacts., • Conduct or participate in project kickoff meetings, production meetings, client meetings, internal coordination meetings, and issue-resolution meetings.Contract, Scope, and Change Management, • Review and understand project contracts, scopes of work, drawings, specifications, schedules, terms and conditions, quality requirements, inspection requirements, and delivery obligations., • Manage contract compliance, including scope control, customer notifications, submittals, reporting requirements, schedule obligations, and contractual correspondence., • Prepare, track, and manage RFIs, submittals, change orders, potential change orders, notices, backcharge responses, delay notifications, and project correspondence., • Ensure work does not proceed outside the approved contract scope without appropriate customer and management approval of cost, schedule, and contractual impacts., • Maintain organized project records, including contract documents, correspondence, meeting minutes, schedule updates, change logs, procurement logs, production updates, QA/QC documentation, and closeout records.Budget, Cost, and Invoicing Management, • Understand and utilize company job cost reporting structures and project management software tools., • Manage project budgets, cost trends, committed costs, projected costs, and forecast-at-completion reporting., • Work with Accounting and management to ensure project financial performance is accurately tracked and aligned with contract terms.Procurement, Vendor, and Subcontractor Coordination, • Manage procurement activities for materials, subcontracted services, specialty fabrication, machining, coatings, galvanizing, testing, transportation, and other project-specific needs., • Review supplier and subcontractor deliverables for schedule impact, technical compliance, quality requirements, documentation requirements, and project risk., • Ensure purchased materials and subcontracted services satisfy project requirements, including material traceability, mill certifications, Buy America/Buy American requirements when applicable, testing requirements, and customer documentation requirements.Quality and Safety, • Support and enforce all company safety policies and procedures while promoting a strong safety culture., • Work with QA/QC and production teams to ensure fabrication procedures, inspection test plans, welding procedures, NDE requirements, coating requirements, dimensional control requirements, material traceability requirements, and customer inspection requirements are followed., • Support resolution of nonconformance reports, corrective actions, procedure qualification issues, welder continuity matters, inspection issues, and final release requirements.Technical Competency and Development, • Read, interpret, and understand structural drawings, bridge drawings, shop drawings, erection drawings, welding symbols, specifications, codes, standards, and contract documents., • Apply working knowledge of AISC, AISC Code of Standard Practice, AWS D1.1, AWS D1.5, AASHTO bridge fabrication requirements, project-specific DOT specifications, coating specifications, and other applicable requirements., • Understand complex fabrication sequencing, material procurement, welding requirements, NDE requirements, coating requirements, dimensional tolerances, shipping constraints, and field installation considerations., • Apply engineering judgment to identify technical conflicts, drawing discrepancies, tolerance issues, fabrication constraints, fit-up concerns, constructability concerns, and potential impacts to schedule, quality, or cost., • Participate in continuous improvement of company processes, project management procedures, fabrication execution, documentation control, and customer communication., • Maintain professional and technical competency through continuing education, industry involvement, and ongoing development.Qualifications, • Bachelor’s degree in Civil Engineering, Structural Engineering, Mechanical Engineering, Construction Engineering, Welding Engineering, or a closely related engineering discipline required., • Professional Engineer license preferred, particularly in structural, civil, or mechanical engineering., • 10+ years of experience managing complex steel fabrication, bridge fabrication, transportation infrastructure, heavy civil, or movable bridge projects preferred., • Direct experience with AISC-certified fabrication required, preferably involving complex bridge structures, fracture-critical members, built-up girders, machinery support steel, trunnion/bascule components, counterweight structures, or other movable bridge assemblies., • Strong technical ability to interpret engineering drawings, shop drawings, erection drawings, welding symbols, specifications, tolerances, inspection requirements, and contract documents., • Experience with AWS D1.1, AWS D1.5, AISC requirements, AASHTO bridge requirements, DOT specifications, dimensional control, NDE coordination, coating requirements, and owner/agency inspection preferred., • Ability to coordinate technical issues with engineers of record, detailers, inspectors, fabricators, erectors, vendors, and customer representatives., • Project Management Professional certification, AISC-related training, bridge fabrication training, or equivalent project management certification preferred.Reporting Reports to the Director of Project Management or designated executive leader. Works closely with Project Managers, Detailing Manager, Engineering, Shop Superintendent, QA/QC Manager, EHS Director, Coatings Manager, Field Project Managers, Procurement, Logistics, Accounting, and Executive Management. Standards • Display a professional and ethical attitude in all work performed for the company., • Maintain confidentiality of all company-related business., • Support company culture, safety expectations, quality standards, and continuous improvement., • Carry out additional responsibilities as assigned by management in the interest of company operations. Powered by JazzHR 3v8lmgCRyY

Tampa Brass & Aluminum Corp is seeking an experienced Combo Welder to perform weld repairs on castings in a foundry and manufacturing environment.

Tampa Brass & Aluminum Corp is seeking an experienced Combo Welder to perform weld repairs on castings in a foundry and manufacturing environment.

Nesco Resource - - Responsibilities: Perform MIG and TIG welding on aluminum and stainless steel components; Fabricate and assemble architectural metal products according to blueprints and work orders; Read and interpret fabrication drawings and engineering prints; Prepare materials for welding by

Aerotek - JobID: JP-005852826 [Fabricator] As a Fitter at Aerotek, you'll: Perform structural fitting on large boiler framework components; Follow the layout and fitting of parts according to blueprints; Assist with pre-fab work as needed, drilling holes, cutting parts, and utilizing an overhead cra

Maintain a clean and safe wel Welder, Skilled Trades.

Welding in and out of position on various pipe configurations using SMAW and FCAW welding processes.Work closely with supervisors and pipe fitters to provide solutions to design deficiencies, system breakdowns, equipment malfunctions and other repair situations.Tear down/repair/repack/reassemble val

HVAC Sheet Metal Fabricator – Precision Fabrication for Commercial HVAC Systems.Company: W J Bachman Mechanical Sheetmetal Co.Salary/Pay Rate: $35 – $40 per hour (Based on experience).Job/Employment Type: Full Time.Schedule: Monday – Friday (Overtime and weekends as needed).Project Scope: Comm

Valmont Industries - 9520 East Broadway Avenue - Responsibilities: Maintain a safe, clean, and productive working environment; Must be able to lift up to 50 lbs.Inspect and ensure the safe use and disposition of production fixtures, chains and hooks; Pull and place chains and ropes around steel bund

AdventHealth - 3100 East Fletcher Avenue - Responsibilities: Installs, maintains, and repairs domestic water pumps, water piping lines, water filters, and plumbing fixtures; Repairs and maintains steam stations, valves, heating and condensate return stations, and sewer and storm drains; Maintains th

Atrium Hospitality - - Responsibilities: Perform scheduled preventative maintenance tasks; Troubleshoot and repair minor electrical, HVAC, and plumbing systems; Maintain pool systems and chemicals; Repair furniture, fixtures, and hotel equipment; Perform seasonal landscaping, groundskeeping, and tr

Journeyman Level Maintenance Mechanic.The position is located in the Building Maintenance and Environment of Care Unit (BM & EOC Unit) composed of Journeyman Level Maintenance Mechanics.Experience needed as a Journeyman Level Maintenance Mechanic or Carpenter with construction and/or maintenance bac

Join the 4M Exceptional Family and Make a Great and Lasting Impression Every Single Day! Are you energetic, highly motivated and looking to be part of a winning team? A hard worker, looking for part-time employment? Or, maybe you'd like to explore a new role, with training and unlimited potential fo

CT Mechanical, a division of Comfort Temp Company, has been dedicated to providing exceptional mechanical solutions since 2014.With a focus on delivering comprehensive services in plumbing, HVAC, and mechanical contracting, we specialize in servicing both residential and commercial properties.Rooted

Alro Steel, a family-owned company,.If you are a team player that is, dependable, safety conscious and hardworking with an attention to detail, then Alro Steel has the career for you.Outstanding low cost 90/10 Healthcare benefits after 30 days of employment!.Medical/Dental/Vision/Prescription.Respon

Leader Tech is a world leading innovator and manufacturer of EMI shielding products for circuit boards, electronic enclosures, interconnect cables and Thermal solutions founded in 1984.The Company serves a diverse commercial and military customer base from its Global EMI Shielding Technology Center

Build your Career with an Industry Leader.Headquartered in Cincinnati, LSI Industries (NASDAQ: LYTS) specializes in the creation of advanced lighting, graphics, and display solutions across strategic vertical markets.The company's American-made products, which include lighting, print graphics, digit

Pipefitter III (Journeyman Level).The Pipefitter III is a senior-level (Journeyman-equivalent) role requiring mastery in wet-side HVAC piping systems for commercial and industrial applications.With 5+ years of hands-on experience, this position operates independently with minimal supervision, perfor

AdventHealth - 3100 East Fletcher Avenue - Responsibilities: Install, inspect, maintain, repair, and perform preventive maintenance on heating, ventilation, and air conditioning systems.Develop and implement department equipment procedures for power outages.Prepare preventive maintenance schedules a

IC Mechanical, a proud member of the Modigent family, is a leader in next-generation building services, delivering innovative HVAC, plumbing, and controls solutions to commercial and industrial clients nationwide.We combine decades of expertise with a commitment to safety, quality, and efficiency to

Electrical Technician 1099 Contractor.Job Posting: Electrical Technician 1099 Contractor.Company: Superior Contracting & Maintenance Location: Local Technician (Proudly serving AL, AZ, GA, FL, NC, OK, SC, TN, & TX).Are you an experienced electrical technician looking for the flexibility to manage

ASP America's Swimming Pool Company is America's premier swimming pool service company.We have been operating for over 15 years with an outstanding reputation.We pride ourselves on providing "resort quality pool services".To do this we have built a team of dedicated, enthusiastic technicians who en

IC Mechanical, a proud member of the Modigent family, is a leader in next-generation building services, delivering innovative HVAC, plumbing, and controls solutions to commercial and industrial clients nationwide.We combine decades of expertise with a commitment to safety, quality, and efficiency to

We are seeking experienced Pipefitters to join our team in Newport News, VA.This position offers a competitive hourly rate and per diem, requiring at least four years of experience in pipefitting.Read and interpret ship piping drawings to plan and execute pipefitting tasks accurately.Fit and install

Chromalloy is a global engineering & solutions company.We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.We develop, manufacture and repair critical turbine components for a range of engine platforms.Our

Position: 1st Class Pipefitter.Rate of Pay: $23 to $29 per hour and $120.Daily Per Diem for those who qualify.Currently seeking 1st class Pipefitter to work in Tampa, FL.Shipfitter applying for this position must have at least 2 to 3 years of shipyard experience.Must be able to comprehend blueprints

Walsh Infrastructure Management LLC is currently seeking a Maintenance Technician for the TAMPA I-4/I-275/I-175/I-375, in Tampa, FL.The Maintenance Technician will perform tasks involving physical labor on jobsites including commercial, industrial, or heavy civil projects; may operate hand and/or po