Trabajos shop manager en Minneapolis, MinnesotaCrear alertas

Job Description The Pre-Owned Mechanic/ Turf Technician is responsible for inspecting, diagnosing, repairing, and preparing used commercial mowing and turf equipment for resale. This role ensures all pre-owned units meet company quality, safety, and performance standards before delivery to customers. Essential Duties and Responsibilities • Perform comprehensive inspections and evaluations of pre-owned equipment, • Diagnose mechanical, hydraulic, electrical, and engine issues accurately, • Complete repairs and refurbishments including:, • Engine and driveline service, • Hydraulic system troubleshooting and repairs, • Electrical system diagnostics, • Deck and cutting system repairs, • Completion of required safety checks, • Document condition reports and repair recommendations for each unit, • Work closely with manager to prioritize units for resale, • Maintain accurate service records and usage of parts, • Follow all safety guidelines and company procedures, • Safely and effectively, use all service and repair tools: hoist, welder, test equipment, pressure washer, compressors, power tools, etc., • Safely use forklift., • Work as a team in successfully completing the job., • Perform other duties as necessary and requested to successfully complete the job. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • High School diploma or equivalent., • Technical degree (2yr.) or equivalent experience required., • Strong knowledge of: Gas and diesel engines, Hydraulic systems, and Electrical diagnostics Skills and competencies • Strong troubleshooting and diagnostic ability, • Attention to detail and quality workmanship, • Ability to work independently and manage workload, • Time management and prioritization skills, • Team-oriented with good communication skills, • Mechanical aptitude and problem-solving mindset Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; drive; use hands to finger, handle, or feel; and talk or hear. The employee is required to stand, walk, and reach with hands and arms. Specific vision abilities required by this job include close vision and ability to adjust focus. There is frequent holding and grasping with the hands. Lift, push, and pull up to 75 lbs. required on a regular basis. The employee will drive a company vehicle. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work is performed indoors in a shop environment and outdoors on equipment. There is exposure to loud noise levels, vibration, chemicals, dust, mechanical hazards, and moving objects or other vehicles. May be exposed to cold and hot temperatures, inclement weather conditions, chemicals, mechanical hazards, and hazardous physical substances, gas and/or fumes.

Job Description 3rd Shift Diesel Technician Foreman – Roseville, MN | $32–$40/hr + $2 Shift Differential If you are an experienced Diesel Technician who is ready to step into a leadership role, thrives on nights, and wants a shop that rewards your performance, Universal Truck Service has the opportunity for you. Who We Are Universal Truck Service is a family-owned, three-generation company that has grown from a two-bay shop in New Brighton to a 68,000 sq ft facility in Roseville since 2000. Universal Truck Service is a Cummins dealer, an Autocar and Hyundai Construction Equipment dealer, and one of the most well-equipped heavy-duty truck shops in the Twin Cities. Diesel Technicians and shop leaders at Universal Truck Service receive ongoing OEM training, modern tooling, and a clear path forward. Universal Truck Service was founded on the belief that great service and quality are not a thing of the past. A Day in the Life As a 3rd Shift Diesel Technician Foreman at Universal Truck Service, you will work a 4/10 schedule - four ten-hour nights Monday through Thursday, with three-day weekends every week. You will work hands-on alongside your team while overseeing shop flow, assigning work, and ensuring every job meets the quality and timeline expectations Universal Truck Service is known for. You will assist with diagnostics, keep customers updated on job progress, coordinate with the service writer, and provide ongoing training to shop personnel. This role is for a Diesel Technician who leads from the front. What You'll Do • Manage service and repair personnel by assigning and directing activities, following up on in-progress repairs, and appraising shop personnel performance, • Plan and schedule repairs proactively - review the daily workload and build an efficient execution plan each shift, • Assist technicians with diagnostics and mechanical support as needed, • Perform ongoing hands-on training of service and repair personnel, • Oversee active jobs to ensure they stay within estimated limits and customer expectations, • Provide customers with clear, accurate daily updates on job progress, • Perform repairs directly when needed, • Back up the Maintenance Manager and service writer by answering phones, responding to emails, and handling COD customer billing as needed Schedule 3rd Shift - 4/10 schedule (Monday through Thursday nights). $2/hr shift differential included. Three-day weekends every week. What You Bring • 2+ years of experience as a Diesel Technician or Diesel Mechanic, • Strong mechanical and troubleshooting abilities across Class 6, 7, and 8 trucks and medium duty trucks, • Demonstrated leadership, communication, and organizational skills, • Own tools and toolbox, • Strong computer skills and ability to adapt to new software programs, • Valid Class A or B driver's license recommended, • High school diploma required; technical degree or DOT certification a plus What You Get • $32–$40/hr depending on experience, • $2/hr shift differential, • $1,000–$1,500 performance bonus every 90 days (80% of Universal Truck Service Diesel Technicians hit it), • $300 tool and boot bonus every 90 days, • Medical, Dental, and Disability Insurance, • PTO and Paid Holidays, • 401K with company match, • Tool and toolbox program with 2-year commitment, • Paid Cummins and Hyundai OEM certification training, • Three-day weekends every week Ready to Join the Team? Click to fill out our 3-minute application and a member of the Universal Truck Service team will be in touch within 24–48 hours. Job Posted by ApplicantPro

Job Description Job Summary: This position is accountable for performing press brake operations and activities. Individuals demonstrate core competencies required throughout the organization. These competencies include safety, quality, production, and behavior. Essential Duties & Responsibilities: Level 1 • Operate Press Brake safely when lead or others have setup and validated quality requirements for a specific part, • Consistently maintain a neat and orderly work area., • Must frequently lift and/or move up to 50 pounds (If weighs more, then a helper is required.), • Perform EPICOR transactions logging in and out of jobs and recording quantity complete, scrapped., • Bend parts up to 144 inches in length., • Level 2 (Includes Level 1 Requirements) Perform simple setups on Press Brake utilizing part drawings and Bend Simulations., • Set up/Observe ¼ inch rule. If not possible engage Lead or VSM prior to operating., • Forklift Certified, • Reads and follow Shop Loads, • Perform inspections using precision measuring and gauging equipment., • Perform and document all Job/Routing/Quality procedures as directed., • Perform material handling functions including packaging., • Assemble, Load and Maintain Tooling, Fixtures, Jigs, Etc., • Perform EPICOR transactions moving material from/to appropriate locations. Level 3 (Includes Level 1,2, and 3 Requirements) • Suggest ideas to improve job processes and inform VSM of suggestions., • Provides adequate feedback to department manager when the job is not running within 15% of standard., • Provides adequate feedback to Department Managers/Engineering by using M.E.C.R forms and notes on the routing., • Working knowledge of punch and die configurations, tip radius and the effect on part geometry, • Must frequently lift and/or move up to 50 pounds (If weighs more, then a helper is required.), • Bend parts up to 144 inches in length., • Ability to read and comprehend instructions, short correspondence and memos; basic math skills, working knowledge of computer systems Lead (Includes Level 1,2, and 3 Requirements) • Capable of training for complex and simple setups, • Capable of training EPICOR transactions, • Capable of training Safety and Quality Requirements Cincinnati Press Brakes (PROFORM, AUTOFORM, & MAXFORM – 90, 135, & 230 ton models.) Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: • High School Diploma or GED Equivalent, • CNC experience (Required for L3 and lead) Skills and/or Experience: • Press Brake experience desirable for L1, Required for all other levels, • Advanced blueprint reading., • Advanced sheet metal inspection experience, • Working knowledge of controls for Cincinnati Press Brakes (Windows based), • Ability to calculate required tonnages and bend allowances, • Ability to select proper tooling required to form a part (Acute, Gooseneck, Offset, etc.), • Ability to work on variety of material types and thicknesses, • Setup experience specific to level, department, or equipment, • Sheet Metal Layout experience (Tangent Correction, Basic Bend Allowance Etc.) Level 2 and up only, • Understanding of Material Properties including Flatness, Surface Grades, Types, Gauge etc. Level 2 and up only Expectations: We at Dalsin Industries pride ourselves on Quality, Efficiency, and Safety. Long Brakes are the forefront on the brake press line. Long Brakes deals with the larger parts, so Quality is very important. Long Brakes also deals with some of our more active and larger customers, so orders tend to fill up quickly. Consistency will be a key factor in getting these parts shipped on time. Dealing with these larger parts comes with being Safe and knowing your own limitations on these larger parts. Training Schedule: Monday-Thursday 5:00am-3:30pm (Until further notice) After Training Schedule: Monday-Thursday 3:30pm-2:00am

Job DescriptionDescription: We're seeking a talented Diesel Technician Apprentice to join the Transwest Team! Transwest is a leading provider of top-quality commercial trucks and transportation solutions. Committed to reliability and customer satisfaction, Transwest is dedicated to driving success in the transportation industry. Why join the Transwest Team? • Exceptional Leadership, • Beautiful, Updated & Clean Environment, • Competitive PTO & Benefits Packages, • Company Training, • Opportunities for Advancement, • Quick & Efficient Interview Process We offer a full benefits package for eligible employees including: • Medical, Dental, and Vision Insurance, • Life (Voluntary and Employer Paid) and Disability Insurance, • 401(K) with company match beginning with your first contribution., • HSA and/or FSA, • Paid Time Off, Sick Time, and Company Paid Holidays, • Employee Car Discount ProgramRequirements: Essential Duties & Responsibilities: • Perform repairs following OEM standards., • Adhere to company safety guidelines., • Communicate openly with management and other team members., • Perform work as outlined in repair orders., • Verify the warranty on all repair orders, if applicable., • Perform work with efficiency and accuracy, in accordance to dealership and factory standards., • Diagnose and repair vehicle malfunctions., • Cross collaborate with the parts department in order to obtain parts., • Save and tag warranty parts., • Regularly communicate with the Shop Foreman and provide an educated recommendation if a repair order needs to be adjusted., • Summarize repairs and technician stories., • Record time punches., • Road test vehicles as needed for quality assessment., • Maintain working knowledge of factory technical bulletins., • Ensure customer vehicle cleanliness., • Maintain a neat and orderly work area., • Treat dealership owned tools with respect and care., • Uphold federal, state and local regulations governing the disposal of hazardous waste., • Perform job duties and functions with flexibility in the event circumstance of; shift changes, emergencies, changes in personnel, workload, rush jobs or technology developments., • Additional duties as assigned. Work Environment & Physical Abilities: • Activities require a full range of motion including; handling and lifting, manual and finger dexterity and eye-hand coordination., • This position may require standing, balancing, bending or stooping for prolonged periods of time., • This position requires corrected vision and hearing within normal range., • This position requires the occasional ability to lift and carry items weighing up to 80 lbs., • Required to perform work inside and outside, in varying weather situations., • Must be able to operate simple, complex and heavy-duty machinery. Required Education, Experience, Knowledge & Skills: • High school diploma or equivalent., • Valid driver's license and MVR in good standing., • Excellent written and verbal communication skills., • Multitasking Skills, • Conflict Resolution Skills, • Independent Working Skills, • Detail Oriented, • Quick Thinking, • Ability to work any shift if needed., • Experience diagnosing and repairing passenger automobiles., • Familiarity with all aspects of gas and diesel truck repair and maintenance including; engine repair, transmission repair, drivability and electrical diagnostics, suspension, brake systems, etc., • Must possess a complete set of hand tools with rollaway toolbox., • Ability to successfully complete a general abilities assessment., • Ability to pass a post-offer background check, physical and drug screen. Preferred Education, Experience, Knowledge & Skills: • Previous experience in a similar role., • Experience diagnosing and repairing diesel trucks., • Diesel Engine Technology Certification(s) and/or Education Job Details: • Type: Hourly, • Compensation Range: $20.00 to $58.00 an Hour, • Reports To: Service Manager, • Shift: Shift Options Available, • Closing Date: Open Until Filled #TW

Job Description ABOUT FAIRCHILD EQUIPMENT Fairchild Equipment was founded in 1985 as Yale Materials Handling. Under the leadership of Gary Fairchild, we gradually diversified our manufacturers to add trusted brands, expanded our services areas to better serve Wisconsin, Minnesota, Northern Illinois, North Dakota, and the Upper Peninsula of Michigan. We’ve grown from only a five-person operation to over 280 employees. Now under the leadership of Gary Fairchild’s son, Chad Fairchild, Fairchild is all about possibilities for additional growth and expansion, while maintaining our operations as Family Owned. COMPANY CULTURE We know that in order for us to provide a dynamic and comprehensive customer experience, we need to have a team dedicated to industry experience, knowledge and customer service. We know our employees embrace our values and are driven to exceed expectations and we welcome the individual who shares those values. Come join our Fairchild Team! Family Values – Healthy work/life balance promoting a winning and pleasant work environment. Follow the Golden Rule. Safety Always – We are committed to safety at all times and in all places. Customers for Life – Excellence in customer Service. If we don’t deliver, let us know, and we WILL fix it! Employer of Choice – Happy and productive employees who outwork the competition. Active in our Communities – Outstanding citizens in the market we serve. ABOUT THE POSITION As our Technician, you will provide exceptional customer service to our customers by working on their material handling equipment at the customers location or within our branch shop. This position requires you to perform mechanical repairs ensuring that equipment is running to its full performance, providing our customer with effective and efficient performing equipment. Recent graduates from technical schools with education in automotive and/or diesel repair are strongly encouraged to apply. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Repair, diagnose, inspect, and maintain all material handling equipment for customer work orders assigned to you., • Accepts repair orders as assigned by Service Writer., • Communicate with customer(s) on diagnosed repairs suggested or required for repair and obtains customer approvals., • Reads work orders, observes and listens to truck in operation to determine/diagnose malfunction or problem(s)., • Offers solutions to meet customer specifications., • Timely submission of work orders., • Provides estimates when appropriate., • Repair, service, recondition or assemble equipment as approved by the customer/Service Manager., • Obtains necessary parts working cooperatively with Parts department staff., • Makes mechanical repairs to equipment after a complete inspection and analysis of breakdown has been completed., • Records complete repair description on work order, including correct model and serial number of equipment and records hour meter reading., • Obtains signature from customer and communicates with them on repair needs or work that was completed., • Examines protective guards, loose bolts, specified safety devices on truck and makes adjustments., • Lubricates moving parts and drives repaired truck to verify conformance to specifications., • Always maintains professional image of self, cleanliness of van (externally and internally) and of assigned work area at customer site., • Maintains and operates shop equipment and tools., • Notifies Service Manager or Supervisor of safety issues and/or accidents immediately., • Performs quality work as quickly and professional as possible., • Promotes marketing efforts to drive parts, service, equipment and rental sales., • Completes service forms and submit directly to Service department daily via work tablet., • Adapt and act out the company’s core value – Safety Always – At All Times, In All Places. REQUIRED SKILLS AND ABILITIES: • Must have a valid driver’s license and good driving record; CDL may be required., • Experience in forklift repair is desired, intermediate maintenance experience is required., • Ability to read and interpret documents such as safety manual, operating maintenance instructions and procedure manuals., • Ability to speak effectively with customers or employees of an organization., • Ability to work under little or no supervision., • Must be able to provide own tools for the job immediately; annual tool incentive is given. EDUCATION AND EXPERIENCE: • High School Graduate or General Education Degree (GED)., • 3+ years of mechanic experience and/or education relating to the position., • Basic knowledge of computer and internet software. EMPLOYEE BENEFITS INCLUDE: • Full benefits package, including Medical, Dental and Vision insurance., • Uniforms are provided and laundered by company., • Annual Tool Incentive., • Company paid Rx Safety Glasses., • Company owned/leased vehicle, if required for position., • Paid Training., • Generous Paid Time Off., • Paid Holidays., • 401(k) retirement plan and Employer Match., • Wellness Program that offers the opportunity to earn a medical insurance discount., • Company Paid Short- Term and Long-Term Disability. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Exerting 75 to 100 pounds of force occasionally, and/or 40 to 50 pounds of force frequently, and/or 15 to 20 pounds of force constantly to move objects., • Frequent physical activity of the position:, • Stooping- bending body downward and forward by bending spine at the waist., • Kneeling- bending legs at knee to come to a rest on knee or knees., • Crouching- bending the body downward and forward by bending leg and spine., • Crawling- moving about on hands and knees or hands and feet., • Reaching- extending hand(s) and arm(s) in any direction., • Standing- remaining upright on the feet, particularly for sustained periods of time, • Walking- moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing- using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling- using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Lifting- raising objects from a lower to a higher position or moving objects horizontally form position-to-position., • Grasping- applying pressure to an object with fingers and palm., • Talking- Expressing or exchanging ideas by means of spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing- Perceiving the nature of sounds at normal speaking levels with or without correction and having the ability to receive detailed information through oral communication., • Occasional physical activity of the position:, • Climbing- ascending or descending., • Balancing- maintaining body equilibrium., • Fingering- perceiving attributes of objects by touching with skin, particularly that of fingertips., • The visual acuity requirements:, • The worker is required to have close visual acuity to perform an activity such as visual inspection involving small defects, small parts, and/or operation of machines., • The worker is required to have visual acuity to perform an activity such as performing mechanical or skilled trades tasks of a non-repetitive nature., • The conditions the worker will be submitted to in this position:, • The worker is subject to both environmental conditions: Activities occur inside and outside., • The worker is subject to extreme cold: Temperatures typically below 32 degrees for period of more than one hour. Worker may also be subject to other environmental conditions such as wind and humidity., • The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. Worker may also be subject to other environmental conditions such as wind and humidity., • The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level., • The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicle, electrical current, exposure to high heat and exposure to chemicals., • The worker is subject to atmospheric conditions: one or more of the following conditions that affect the respiratory system of the skin; fumes, orders, dusts, mists, gases, or poor ventilation., • The worker is occasionally required to function in narrow aisles or passageways., • The worker may be subject to oils: there is air and/or skin exposure to oils and other cutting fluids. To take that next step in your career, and have an opportunity for additional growth, you will want to join our dynamic team. Fairchild Equipment, Inc. is recognized as the fastest growing company of its kind in the Midwest! Fairchild Equipment, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Apply now!

Job Description ABOUT FAIRCHILD EQUIPMENT Fairchild Equipment was founded in 1985 as Yale Materials Handling. Under the leadership of Gary Fairchild, we gradually diversified our manufacturers to add trusted brands, expanded our services areas to better serve Wisconsin, Minnesota, Northern Illinois, North Dakota, and the Upper Peninsula of Michigan. We’ve grown from only a eight-person operation to over 325 employees. Now under the leadership of Gary Fairchild’s son, Chad Fairchild, Fairchild is all about possibilities for additional growth and expansion, while maintaining our operations as Family Owned. COMPANY CULTURE We know that in order for us to provide a dynamic and comprehensive customer experience, we need to have a team dedicated to industry experience, knowledge and customer service. We know our employees embrace our values and are driven to exceed expectations and we welcome the individual who shares those values. Come join our Fairchild Team! Family Values – Healthy work/life balance promoting a winning and pleasant work environment. Follow the Golden Rule. Safety Always – We are committed to safety at all times and in all places. Customers for Life – Excellence in customer Service. If we don’t deliver, let us know, and we WILL fix it! Employer of Choice – Happy and productive employees who outwork the competition. Active in our Communities – Outstanding citizens in the market we serve. ABOUT THE POSITION As our Technician, you will provide exceptional customer service to our customers by working on their material handling equipment at the customers location or within our branch shop. This position requires you to perform mechanical repairs ensuring that equipment is running to its full performance, providing our customer with effective and efficient performing equipment. Recent graduates from technical schools with education in automotive and/or diesel repair are strongly encouraged to apply. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Repair, diagnose, inspect, and maintain all material handling equipment for customer work orders assigned to you., • Accepts repair orders as assigned by Service Writer., • Communicate with customer(s) on diagnosed repairs suggested or required for repair and obtains customer approvals., • Reads work orders, observes and listens to truck in operation to determine/diagnose malfunction or problem(s)., • Offers solutions to meet customer specifications., • Timely submission of work orders., • Provides estimates when appropriate., • Repair, service, recondition or assemble equipment as approved by the customer/Service Manager., • Obtains necessary parts working cooperatively with Parts department staff., • Makes mechanical repairs to equipment after a complete inspection and analysis of breakdown has been completed., • Records complete repair description on work order, including correct model and serial number of equipment and records hour meter reading., • Obtains signature from customer and communicates with them on repair needs or work that was completed., • Examines protective guards, loose bolts, specified safety devices on truck and makes adjustments., • Lubricates moving parts and drives repaired truck to verify conformance to specifications., • Always maintains professional image of self, cleanliness of van (externally and internally) and of assigned work area at customer site., • Maintains and operates shop equipment and tools., • Notifies Service Manager or Supervisor of safety issues and/or accidents immediately., • Performs quality work as quickly and professional as possible., • Promotes marketing efforts to drive parts, service, equipment and rental sales., • Completes service forms and submit directly to Service department daily via work tablet., • Adapt and act out the company’s core value – Safety Always – At All Times, In All Places. REQUIRED SKILLS AND ABILITIES: • Must have a valid driver’s license and good driving record; CDL may be required., • Experience in forklift repair is desired, intermediate maintenance experience is required., • Ability to read and interpret documents such as safety manual, operating maintenance instructions and procedure manuals., • Ability to speak effectively with customers or employees of an organization., • Ability to work under little or no supervision., • Must be able to provide own tools for the job immediately; annual tool incentive is given. EDUCATION AND EXPERIENCE: • High School Graduate or General Education Degree (GED)., • 3+ years of mechanic experience and/or education relating to the position., • Basic knowledge of computer and internet software. EMPLOYEE BENEFITS INCLUDE: • Pay: $23-36 per hour, • Full benefits package, including Medical, Dental and Vision insurance., • Uniforms are provided and laundered by company., • Annual Tool Incentive., • Company paid Rx Safety Glasses., • Company owned/leased vehicle, if required for position., • Paid Training., • Generous Paid Time Off., • Paid Holidays., • 401(k) retirement plan and Employer Match., • Wellness Program that offers the opportunity to earn a medical insurance discount., • Company Paid Short- Term and Long-Term Disability. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Exerting 75 to 100 pounds of force occasionally, and/or 40 to 50 pounds of force frequently, and/or 15 to 20 pounds of force constantly to move objects., • Frequent physical activity of the position:, • Stooping- bending body downward and forward by bending spine at the waist., • Kneeling- bending legs at knee to come to a rest on knee or knees., • Crouching- bending the body downward and forward by bending leg and spine., • Crawling- moving about on hands and knees or hands and feet., • Reaching- extending hand(s) and arm(s) in any direction., • Standing- remaining upright on the feet, particularly for sustained periods of time, • Walking- moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing- using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling- using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Lifting- raising objects from a lower to a higher position or moving objects horizontally form position-to-position., • Grasping- applying pressure to an object with fingers and palm., • Talking- Expressing or exchanging ideas by means of spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing- Perceiving the nature of sounds at normal speaking levels with or without correction and having the ability to receive detailed information through oral communication., • Occasional physical activity of the position:, • Climbing- ascending or descending., • Balancing- maintaining body equilibrium., • Fingering- perceiving attributes of objects by touching with skin, particularly that of fingertips., • The visual acuity requirements:, • The worker is required to have close visual acuity to perform an activity such as visual inspection involving small defects, small parts, and/or operation of machines., • The worker is required to have visual acuity to perform an activity such as performing mechanical or skilled trades tasks of a non-repetitive nature., • The conditions the worker will be submitted to in this position:, • The worker is subject to both environmental conditions: Activities occur inside and outside., • The worker is subject to extreme cold: Temperatures typically below 32 degrees for period of more than one hour. Worker may also be subject to other environmental conditions such as wind and humidity., • The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. Worker may also be subject to other environmental conditions such as wind and humidity., • The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level., • The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicle, electrical current, exposure to high heat and exposure to chemicals., • The worker is subject to atmospheric conditions: one or more of the following conditions that affect the respiratory system of the skin; fumes, orders, dusts, mists, gases, or poor ventilation., • The worker is occasionally required to function in narrow aisles or passageways., • The worker may be subject to oils: there is air and/or skin exposure to oils and other cutting fluids. To take that next step in your career, and have an opportunity for additional growth, you will want to join our dynamic team. Fairchild Equipment, Inc. is recognized as the fastest growing company of its kind in the Midwest! Fairchild Equipment, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Apply now!

Job Description POSITION PURPOSE: The Manufacturing Engineer’s function is to support Operations at the site level with a focus on continuous improvements to ensure high levels of efficiency and product quality. This role is responsible for being the problem solvers to optimize a part through all the operations. This position will identify solutions to optimize efficiency while maintaining compliance to customers regulatory requirements. This position will work cross-functionally and collaboratively across the organization. ESSENTIAL FUNCTIONS AND BASIC DUTIES: • Troubleshoot production delays and constraints with equipment and processes., • Identify constraints and/or operational issues through line walks and other methods; work to solve and overcome through process improvements; collaborating with machinists and ops leaders, • Identify, implement, and track continuous improvement opportunities., • Update and maintain CI Pipeline for visibility of projects identified, in process, and completed., • Identify variances in rates and work to develop and improved process to achieve quoted production rates., • Partner with Scheduler and Plant Manager on cycle times and setup times to ensure proper visibility of capacity., • Provide tooling recommendations to the shop floor and CNC programmers., • Recommend capital equipment and appropriate justifications., • Populate routing steps for rework and recert jobs., • Contribute to value-add discussions with customers., • Validate and implement tooling changes requested by Operations., • Collaborate with other sites to implement new found best practices., • All other related duties as assigned. QUALIFICATIONS EDUCATION/CERTIFICATION: Bachelor’s degree in Engineering or equivalent work experience in Manufacturing required. REQUIRED KNOWLEDGE: Knowledge of machining processes, tool and fixture design, time standards, and machine center capabilities. Engineering principals, tools, and concepts. Knowledge of project management principles. LEAN and/or Six Sigma certifications & training preferred. EXPERIENCE REQUIRED: Experience using SolidWorks, CAD, CAM, data analysis programs, or related software. SKILLS ABILITIES: Strong organizational, project management, Microsoft skills, and structured problem-solving ability. Ability to communicate effectively, both verbal and written, with a wide variety of manufacturing personnel and at all other levels. Ability to work at a high velocity with minimal guidance.

Job Description ISCAR USA, a dynamic and innovative cutting tool company, has an immediate opening for an OEM Specialist covering the northern United States - preferably residing in the Minneapolis / St. Paul, MN area. The OEM Specialist is responsible for increasing Iscar Metals’ cutting tool market share with Machine Tool Builders & Dealers in an assigned zone through the application support of cutting tools. A successful OEM Specialist will possess a strong technical background in the metal removal industry with a heavy emphasis on cutting tool application and process optimization. Strong interpersonal and relationship building skills are also imperative for success in this position. DEFINTIONS OEMs – Machine Tool Builder, Machine Tool Dealer and Auxiliary Original Equipment Manufacturer Accounts defined by the company Zone - Defined by the Company as a geographic area KEY RESPONSIBILITIES AND DUTIES • Present Iscar product value to Sales and Applications Teams at the OEMs., • Prepare tooling package proposals for the Sales and Applications Teams at the OEMs.., • Maintain positive business relationships with the OEMs through continual improvement of the overall Iscar experience., • Gain the confidence of the OEMs and become their primary point of contact for sales related issues regarding cutting tools., • Prepare and present technical sales material pertinent to the OEMs., • Grow market share within the assigned zone. If the zone is shared, communicate and coordinate with other representatives to achieve growth., • Accomplish sales goals as assigned by the OEM Manager., • Continuously improve knowledge of Iscar products on self-serve basis (via Iscar provided information) and share this knowledge with OEMs through product presentation., • Timely completion of administrative tasks related to sales activities (Trunk Stock, Expenses, Call Reports, etc.) JOB REQUIREMENTS: WORK EXPERIENCE, EDUCATION, KNOWLEDGE, SKILLS, AND ABILITIES • Diverse background in metal removal processes with a minimum of five years’ experience in a relevant manufacturing/engineering field preferred, • Working knowledge of various materials and their machinability preferred, • Ability to interpret and communicate production documents, optimize production strategy, and apply tooling in a manner that will lead to greater sales conversions, • Effective verbal and written communication skills with emphasis on the ability to successfully translate technical knowledge into effective sales presentations, • Self-Motivated, Ethical, and Dependable, • Interpersonal skills capable of coordinating expectations with all relevant parties in the supply chain in order to facilitate optimum sales relationships, • Must have the ability to work in the Microsoft suite of products (OneDrive, Excel, PowerPoint, Word, etc…), • 3D CAD Experience a plusCompany DescriptionABOUT ISCAR USA ISCAR is a leader in advanced metal cutting solutions, helping American manufacturers achieve greater efficiency, precision, and profitability. As part of the global ISCAR network, we combine world-class innovation with local expertise to deliver cutting tools that redefine performance on the shop floor. Our passion is helping customers do more with less — less cycle time, less waste, and less cost per part. Through continuous research and development, ISCAR offers cutting-edge indexable carbide inserts, end mills, drills and tooling systems designed to push the limits of CNC machining. Every product reflects our commitment to smart tool geometry, stronger, more wear resistant materials, and intelligent design — enabling manufacturers to run faster, cut longer, and finish precisely. Beyond the tools, ISCAR brings true partnership. Our technical teams work side-by-side with customers to optimize toolpaths, improve productivity, and reduce overall machining costs. Whether it’s aerospace, automotive, energy, or general manufacturing, our focus is on delivering measurable results — not just components, but complete machining solutions. At ISCAR, innovation isn’t just a word — it’s how we help American industry stay competitive in a fast-moving world. We’re proud to be the trusted partner behind the tools that keep production strong, efficient, and ready for the challenges of tomorrow. ISCAR promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive marketplace. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package. ISCAR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.ABOUT ISCAR USA\r\nISCAR is a leader in advanced metal cutting solutions, helping American manufacturers achieve greater efficiency, precision, and profitability. As part of the global ISCAR network, we combine world-class innovation with local expertise to deliver cutting tools that redefine performance on the shop floor.\r\n\r\nOur passion is helping customers do more with less — less cycle time, less waste, and less cost per part. Through continuous research and development, ISCAR offers cutting-edge indexable carbide inserts, end mills, drills and tooling systems designed to push the limits of CNC machining. Every product reflects our commitment to smart tool geometry, stronger, more wear resistant materials, and intelligent design — enabling manufacturers to run faster, cut longer, and finish precisely.\r\n\r\nBeyond the tools, ISCAR brings true partnership. Our technical teams work side-by-side with customers to optimize toolpaths, improve productivity, and reduce overall machining costs. Whether it’s aerospace, automotive, energy, or general manufacturing, our focus is on delivering measurable results — not just components, but complete machining solutions.\r\n\r\nAt ISCAR, innovation isn’t just a word — it’s how we help American industry stay competitive in a fast-moving world. We’re proud to be the trusted partner behind the tools that keep production strong, efficient, and ready for the challenges of tomorrow.\r\n\r\nISCAR promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive marketplace. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package.\r\n\r\nISCAR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.

Job Description To be a team member of the Driven by Dobbs family you must be dedicated to supporting the company’s mission, vision, and values. OUR MISSION: To be the leader in the automotive tire and service aftermarket industry in every market that we operate in providing premier service to our guests. POSITION TITLE: Service Manager CLASSIFICATION: Exempt POSITION OVERVIEW: Driven by Dobbs, our family of brands brings together Dobbs Tire and Auto Centers—founded in 1976 in South St. Louis, MO as a family-owned complete auto care provider—and Conrad’s Tire Express & Total Car Care, founded in 1969 in Cleveland, OH. Together, we have grown into a rapidly expanding, multi-market automotive service organization that will operate across eight states in 2026, with continued growth on the horizon. Across all locations, customers can expect a full selection of quality tire brands and comprehensive automotive services, ranging from routine maintenance to advanced diagnostics and engine repair. Our investment in training, development, safety, and overall team wellbeing empowers our people to deliver exceptional service every day. Rooted in a culture that extends beyond the shop, we proudly support local organizations and charities in the communities where our teams live and work. We are seeking an experienced Service Manager to oversee all service and repair responsibilities within a single unit retail store environment. This position will provide direct management to the service and repair operations within a shop environment ensuring quality, timeliness, safety and employee management standards are met. The ideal candidate will have strongly technical knowledge of various make and model service and repair standards, has high standards for customer satisfaction, with a strong work ethic to achieve results. ROLES AND RESPONSIBILITIES: • Partners closely with Store Manager to interview, select and train all service technicians utilizing their technical expertise on ensuring knowledge, skills and experiences align with the needs of the business and role definitions, • In partnership with the Store Manager, evaluates knowledge, skills and performance of all technicians; makes recommendations regarding development, promotions, merit, discipline, etc., • Manages and drives store performance goals including service sales dollars achievement, gross profit, customer satisfaction, employee safety, productivity and efficiency, • Oversees and assigns daily work orders including time, tools, materials and equipment needed, • Provides technical expertise and diagnosis for general and complex service requests for all make and model vehicles, • Suggests and provides technical training to ensure constant skill improvement and enhancement for all service technician levels, • Oversees the safe operations and proper workings of all tools and equipment in the shop; upon budget approval orders necessary replacements or repairs when needed, • Ensure adherence to company policies, procedures, and safety standards at all times, • Maintains high standards for store cleanliness, organization, and inventory management., • Analyze financial and operational data to identify trends and implement improvement plans for underperforming stores., • Ensure consistent delivery of exceptional customer service and resolve escalated concerns promptly, • Manages inventory needs of the shop including tools, materials, equipment needed to ensure smooth operations, • Leads a culture of safety, accountability and operational excellence within the service and sales teams in partnership with the Store Manager, • Ability to meet flexible schedule requirements that could include early mornings, evenings and weekends to meet customer demands, • Performs other position duties as directed by leadership SUCCESS FACTORS:, • A strong belief in safety- Being Safe 100% of the time is the expectation, • Alignment with company mission, vision, and values, • Strong work ethic with a commitment to results, • Strong team player with the ability to adapt to diverse team members, • Ability to perform in a fast paced/high volume environment, • Excellent verbal and written communication skills, • A high level of time management, accountability, and prioritization skills, • Ability to be organized, problem solve, and be solution oriented, • Self-motivated, goal- oriented, and driven to accomplish department goals, • Strong critical thinker with a high level of attention to detail, • Highly-customer centric and master relationship builder, • Proficient in Microsoft Office (Outlook, Teams, Etc.), • Proficient in Point of Sales systems (VAST) strongly preferred WORK ENVIRONMENT:, • Frequent exposure to varying temperatures due to the nature of the work and shop conditions, • Requires adherence to all safety procedures and proper use of personal protective equipment (PPE), • See attached for a complete list of physical demands required for this position EXPERIENCE AND EDUCATION:, • 5+ years’ experience in the automotive repair industry as a technician, service advisor, or service manager required, • Previous experience managing a technicians strongly preferred, • Strong technical acumen of automotive repair standards, tools, processes, etc., • Valid Drivers’ License Required Driven by Dobbs is an equal opportunity employer. All candidates agree to complete a selection assessment and pre-employment screenings. Signature Date

Job DescriptionDescription: Reports to: Production Manager Compensation: $ 31.63 per hour Benefits: Benefits Eligible This position is covered by a collective bargaining agreement with IATSE Local 13. Interviews for this role will begin in July 2026. Position Summary The Lead Sound Engineer is responsible for executing and replicating the sound design for productions. This role serves as the lead console programmer and operator for Guthrie Theater productions, ensuring consistent, high-quality sound reinforcement while upholding the intent of the Sound Designer. The Lead Sound Engineer is also responsible for the maintenance of all sound equipment, ensuring systems are properly maintained and performance ready. In addition to performance work, this role participates in production preparation, load-in, technical rehearsals, changeovers, and strike for assigned productions. All employees are expected to center, model and champion the Guthrie’s core values of Artistic Excellence; Community; Diversity, Equity, Inclusion and Accessibility; and Fiscal Responsibility. Schedule: This role follows the dynamic schedule of a working theater. Hours vary based on type of work. Evening and weekend hours are typical. Show calls range from 4-6 hours on Tuesdays through Sundays. Tech week calls can span up to 12 hours on Tuesdays through Sundays. Other atypical calls include occasional maintenance and events. This position works 40 hours per week and is guaranteed a minimum of 32 work weeks per fiscal (September 1 - August 31) year. The Guthrie is an Equal Opportunity Employer. We are committed to building an equitable environment that finds strength in diversity of identity, experience and perspective. We are dedicated to hiring and developing talented teams which are inclusive and welcoming to individuals with different backgrounds, thoughts, and abilities. Applicants from populations underrepresented in the theater field are strongly encouraged to apply. Primary Duties and Responsibilities 1. Show Operation and Maintenance • Mix and operate live sound for productions and events, maintaining consistent sound quality and upholding established production and artistic standards., • Program and operate digital mixing consoles and playback systems., • Operate sound playback and recording systems, ensuring proper file management and backup of production materials and archives., • Maintain the artistic intent of the Sound Designer throughout the run of the production., • Communicate and collaborate with the Head Sound Engineer, Stage Management, Designers, Production Management, and Directors to assess sound system use, performance, and implementation., • Coordinate with Head Sound Engineer and Production departments to facilitate sound production needs during technical rehearsals and run of a show., • Work with the Wardrobe, Wigs, and Costume departments on placement of wireless microphones based on the unique needs of the production., • Perform in a Show A2 capacity as required by the schedule., • Collaborate with stage crew to facilitate the operation of shows., • Perform pre-show checks and other tests to ensure all sound equipment is functioning. Repair and replace equipment as needed., • Solve problems in concert with other departments if they arise during performances. 1. Sound Department Operations • Assist the Head Sound Engineer as assigned for all Guthrie sound department work., • Provide technical assistance and solutions to address issues of safety and function of sound equipment and software, • Work individually or as part of a team on projects, • Collaborate with other production departments to develop plans for the efficient integration of sound elements., • Transition between tasks and projects when designs or priorities shift., • Build and wire practical sound effects., • Transport inventory between spaces based on department needs., • Troubleshoot sound problems as necessary., • Execute production notes throughout the technical process to ensure production quality., • Set up sound systems and operate consoles for special events. 1. Leadership • Set up equipment and lead crews in sound calls, prioritizing safety and department standards to ensure show objectives are achieved and workflow is efficient., • Oversee and lead other overhire work under the direction of the Head Sound Engineer to ensure show objectives are achieved and workflow is efficient., • Ensure information and materials are available and updated to complete sound projects in a timely and accurate manner., • Develop and apply advanced knowledge and understanding of building sound systems, consoles, and tools to help support all productions and projects, including troubleshooting and problem-solving. 1. Repair and Maintenance • Maintain cleanliness of the sound spaces and equipment. Notify the Head Sound Engineer when supplies are low., • Participate in the strike of sound equipment, ensuring equipment operation and cleanliness is maintained before returning to storage. Restore tools and equipment to the proper location when no longer in use., • Communicate problems and unsafe conditions to the Head Sound Engineer., • Maintain safe conditions and operable shop tools., • Clean and organize workspaces, tools, and sound equipment as needed. Requirements: Essential Knowledge and Qualifications • Demonstrated experience in theatrical sound or a combination of equivalent experience and training., • Demonstrated leadership experience., • Knowledge of theatrical directions and terms., • Knowledge of audio engineering principles to accomplish work., • Knowledge of professional sound systems and current sound technology to meet production requirements., • Knowledge of the physics of sound and acoustics and how it relates to sound systems and equipment., • Knowledge of computer systems and networking to effectively accomplish work., • Knowledge of wireless systems., • Skilled in recording and mixing audio sources., • Can hear and analyze small differences in sound sources., • Knowledge of safe work practices to reduce the risk of injury. Strong commitment to safety and ergonomics in the workplace. Skilled in solving problems creatively and efficiently., • Skilled in effective communication to ask informed questions and relate information to others., • Demonstrated strength in working collaboratively with groups to execute departmental or organizational goals., • Detail oriented., • Can lift 50 pounds., • Can climb and work at heights and in awkward physical positions., • Can work a schedule that includes evening and weekend hours; show calls ranging from 4-6 hours on Tuesdays through Sundays; Tech week calls that can span up to 12 hours on Tuesdays through Sundays; and occasional maintenance and events calls., • Experience with and commitment to working with individuals and teams that exemplify diversity of identity, experience, and perspective, including but not limited to race, color, gender, gender identity, gender expression, age, family and/or marital status, creed, religion, ancestry, disability, national origin, sexual orientation or sexual identity, veteran status, genetic information, pregnancy, body size/type, status with regard to public assistance or any other basis protected by federal, state or local law. WHO SHOULD APPLY? The Guthrie relies on the talents of many artists and staff, both on and off the stage, to create powerful works of theater at the Guthrie. We are dedicated to building an equitable environment that is mixed across lines of difference. Acknowledging that there are many identities that are underrepresented in the theater overall, the Guthrie strongly encourages candidates who bring diversity of identity, experience and thought to apply. We also acknowledge that candidates can have unique and non-linear and transferable skills. We encourage you to apply even if you do not meet every single qualification but have transferrable skills and passion for our mission and vision. WHY SHOULD I APPLY? Be a part of a leading non-profit organization that is committed to serving not only the local Twin Cities community but the industry as a whole. The Guthrie offers top-notch employee benefits and staff perks which includes: • Competitive Benefits: Health, Dental, Vision, Health Savings Accounts (HSA), Employer contributions to HSA, Flexible Spending Accounts (FSA), Dependent Care FSA, Group Life Insurance, Voluntary Life Insurance, Long Term Disability, Short Term Disability, Employee Assistance Program, 403(b) Retirement Plan (with employer match up to 4.5% after one year of service), • Transportation: Subsidized passes for Metro Transit buses and trains, discounted pre-tax monthly ramp parking, • Paid Time Off: Generous Paid Time Off (PTO), Volunteer Time Off (VTO), • Complimentary Tickets: To Guthrie productions, • Discounted Tickets: To all shows produced by the Guthrie and to some performances hosted by the Guthrie, • Classes and Camps: Discounts to Guthrie classes and camps, • Other Perks and Resources: Guthrie Store discount; Employee Affinity Groups ABOUT THE GUTHRIE The Guthrie Theater engages exceptional theater artists in the exploration of both classic and contemporary plays connecting the community we serve to one another and to the world. Through its extraordinary artists, staff and facility, the Guthrie is committed to the people of Minnesota, and from its place, rooted deeply in the Twin Cities, influences the field as a leading 21st century arts organization. Every year more than 500 people, both on stage and off, help ensure our success in creating and supporting the highest level of theater. As an organization, we are committed to our values of Artistic Excellence; Community; Equity, Diversity, Inclusion and Accessibility; and Fiscal Responsibility. The Guthrie Theater is located in the historic Mill District along the Mississippi River in Minneapolis, Minnesota. As the largest city in the state, Minneapolis offers a large variety of parks, lakes, great food, festivals, malls and more. LAND ACKNOWLEDGMENT The Guthrie Theater would like to acknowledge that we gather on the traditional land of the Dakota People and honor with gratitude the land itself and the people who have stewarded it throughout the generations, including the Ojibwe and other Indigenous nations. Applicants must submit a resume to be considered for the position.

Job Description Purpose of the Role The 2nd Shift Production Manager is responsible for leading production operations, ensuring customer orders are completed safely, on time, at the required quality level, and within budget. The role serves as the primary leader for production personnel while coordinating closely with Scheduling, Quality, Manufacturing, and Maintenance. • Shift Work Schedule: Monday – Thursday, 3:15pm – 1:45am (expectation should be 2:45pm – 2am) 1. Lead the Production Team Your primary responsibility is to provide leadership and direction to production employees and Production Team Leads. Responsibilities • Create a safe, productive, and accountable work environment., • Coach and develop technical talent in all areas of the production shop., • Coach and mentor PTLs (Production Team Leaders) and working leads., • Hold employees accountable for productivity, quality, attendance, and work performance., • Support employee development and training., • Ensure staffing levels are appropriate for workload requirements., • Maintain documentation related to employee performance and counseling. 1. Own Quality and Problem Resolution Production Managers play a key role in preventing and resolving quality issues. Responsibilities • Act as a technical resource for trouble-shooting machinery and/or process-related issues as they arise, • Support resolution of MRB and Nonconformance (NC) issues., • Address problems involving parts in production, quarantine, or customer returns., • Work closely with Quality personnel with regards to priority of projects to review, as well as ensuring product meets customer intended specifications. Ensure our QMS specifications for part conformity align with customer print and CAD documentation., • Ensure operators understand how to inspect parts and read blueprints. 1. Drive Daily Production Performance The Production Manager is responsible for keeping work moving through the factory efficiently. Responsibilities • Monitor production schedules and workload capacity. This entails communication with 1st Shift Production managers to set 2nd Shift priorities and maintain continuity of workload., • Evaluate production efficiency and throughput., • Update run times and manufacturing process information., • Prioritize jobs to meet customer delivery requirements., • Review Open Order Reports and production status., • Follow up on Late Laser, Turret, Blank, and Press reports., • Work with Scheduling to ensure jobs are staged and completed on time., • Identify bottlenecks and remove obstacles impacting throughput. 1. Maintain Safety, Compliance & Shop Discipline The Production Manager is responsible for maintaining a safe and organized workplace. Key Expectations • Ensure compliance with OSHA requirements and applicable regulations., • Enforce company policies and procedures., • Promote housekeeping and well-organized work areas., • Maintain document traceability and production records., • Reinforce expectations for attendance, conduct, and workplace discipline policies. 1. Manage Performance Metrics The Production Manager is accountable for supporting success of key business results. Metrics You Are Expected to Positively Influence: • Customer satisfaction, • On-Time Delivery (OTD), • Quality performance, • Labor Efficiencies, • Job margins, • Inventory turnover, • Lead times, • Cost reduction efforts, • Employee development and satisfaction Offer Contingent on Successful Background Check

Job Description Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers. Join Our Team as a Water/Wastewater Engineer! Are you ready to make a significant impact on the future of municipal and utility systems? Foth is on the lookout for a self-driven and team focused Water/Wastewater Engineer to support innovative projects that enhance community infrastructure. This position will be based out of our Minneapolis, MN office location. Primary Responsibilities: • Perform technical engineering discipline lead for water transmission, distribution, sanitary sewer collection, wastewater conveyance, and/or water system project designs and system analysis, • Provide technical consultation to municipal clients on their sanitary sewer system management, watershed planning, capital improvement plans, green infrastructure, pumping stations, and best management practices, • Develop water and wastewater system reports and community-wide master plans., • Participate in capital improvement plans for growing Midwest communities., • Lead a hydraulic analysis team for pressure pipe modeling, transient analysis, pump station analysis, and gravity sewer modeling., • Prepare design plans, specifications, and bid documents for water and wastewater systems., • Provide construction support services, including shop drawings, pay estimates, progress meetings, and construction services.Required Qualifications:, • Bachelor’s Degree in Civil or Environmental Engineering., • Professional Engineer (PE) License., • 3+ years of experience in utility system analysis, sanitary sewer collection, drinking water systems, and /or wastewater conveyance municipal infrastructure improvements. Technical report writing.Preferred Qualifications:, • 8+ years of experience in municipal engineering, wastewater, sanitary sewer, and/or municipal projects as a technical producer, project manager, and/or client contact., • Experience with sanitary and drinking water master planning and modeling software (e.g., SewerGEMS, WaterGEMS, XPSWMM, ArcGIS)., • Experience with software such as ESRI ArcGIS, Bentley MicroStation OpenRoads, and/or AutoCAD Civil3D.All Foth Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Qualified women, minorities, persons with disabilities, and veterans are encouraged to apply. All locations are tobacco-free. Subject to applicable state law, all applicants who have received a written offer of employment and a copy of Foth’s Drug and Alcohol-Free Workplace Program Policy, will be required to undergo testing for commonly abused controlled substances. Applicants must complete the required drug testing within two business days of offer acceptance. Foth will pay for all drug testing, which will be conducted by a licensed independent medical laboratory that follows testing requirements in accordance with applicable state law. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies. Artificial Intelligence: Foth uses artificial intelligence and other technology-assisted tools in connection with parts of our recruiting and hiring process, including to assist with reviewing application materials, identifying potentially qualified candidates, sourcing candidates, and supporting interview preparation. These tools are used to support, but do not replace, human decision-making, and all employment decisions are made by qualified human reviewers. Where required by law, we will provide additional information regarding the use of these tools, and applicants may contact us with questions or request reasonable accommodation regarding their use. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Short Description Description MGX Shop Crane Technicians are responsible for the inspection, diagnosis, repair, and maintenance of various crane equipment including mobile cranes and boom trucks. This position reports to the Service Manager. Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year. Relocation assistance may also be available to those who qualify. ESSENTIAL JOB FUNCTIONS: • Operate and perform thorough inspection of cranes in order to diagnose defects., • Diagnose, repair and troubleshoot various mobile hydraulic and lattice cranes; repair hydraulic and electrical components., • Examines parts for damage or excessive wear using micrometers and gauges. Reads, understands and interprets operating and parts manuals, blueprints and technical drawings., • Tests mechanical, electronic, electrical and hydraulic products and equipment after repair or modification to ensure proper operation and compliance with OEM specifications., • Prepares for jobs by checking parts and drawings for accuracy and completeness., • Perform thorough and accurate annual inspections., • Properly fills out working reports, hours reports, time sheets, hours overviews and expense reports., • Capable of accomplishing tasks independently without direct supervision., • Provides excellent customer service., • Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED with a minimum of two (2) years of experience as a Crane Mechanic/Technician preferred. Experience working with different forms of mobile crane equipment, specifically Grove RT & TMS Cranes; Grove GMK European Cranes; Manitowoc EPIC and/or Traditional Cranes; National Boom Trucks preferred. Must be able to read both electrical and hydraulic schematics. Must have excellent communication skills with a customer/client focus. Possession of a valid driver’s license with a satisfactory driving record preferred. Basic computer skills preferred. Required to purchase full set of hand tools up to 1.5 inches. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management’s attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 4:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl.There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more!

Job DescriptionDescription: Machinist Level 4 Reports To: Operations Manager Target Pay Range: $28-42 Job Summary Machinist level 4 will efficiently make quality conforming product by efficient application of work holding, machine tool setup and tool offset adjustments. Essential Functions: The primary duties and responsibilities of a machinist level 4 consist of but are not limited to: · Highly efficient use of machine tools and time to make quality parts · Using Mastercam, create clear, logical programs on High complexity parts, with documentation for other to follow · Design, create and apply new and complex work holding and fixtures · Setup new and repeating high complexity parts · Expertly complete secondary operations such as deburring · Perform basic to advanced machine preventative maintenance activities · Collaborate with production management, engineering, and quality to establish effective processes · Work effectively within a team to achieve production goals · Train, mentor and coach other team members · Set the example for others to follow with workmanship and teamwork · Miscellaneous activities as assigned by Manager Qualifications: · Education o High School Diploma (required) o Associates Degree in Machine Tool Technology (Highly Preferred) · Certifications o GD&T (Required) · Background o 10+ years’ experience machining o Experience producing tight tolerance parts is both production and prototype environments o 5+ years’ experience working in ISO or AS workplaces Accountabilities · Facilitate a continuous improvement culture · Foster a team-oriented quality ownership culture · Ensure compliance to QMS and Safety requirements · Ensure compliance to Ethics & Employee Handbook · Ensure effective use of resources · Effectively produce product within scope of Job Travelers · Maintain a clean and safe work environment · Produce product meeting customer specification · Produce product in accordance with traveler and other internal process documentation · Meet and/or exceed workmanship standard Authorities · Stop processes & shipments due to quality concerns if necessary · Communicate to Management issues with product and process conformance · Communicate to Management noncompliance to QMS, Safety, Ethics, and Employee Handbook requirements Competencies · Effectively communicate verbally or in writing · Competent use of Window’s based PC · Advanced use of CAM software · Advanced understanding of blue prints · Ability to use and apply basic math applicable to machining · Advanced understanding of GD&T and how to apply it · Advanced ability to troubleshooting/problem solving machine and programming issues on high complexity parts with minimal supervision · Ability to maintain high level of attention to detail · Advanced knowledge of cutting tools and their applications · High proficiency with measuring tools, e.g. micrometers, calipers, pins, vision system, CMM · Ability to collaborate with others throughout the organization · Regularly lift 30-50 pounds DEFINITIONS Basic- Fundamental understanding of a required skill set Intermediate- Proficient skill and understanding of a required skill set Advanced- Proficient skill and understanding of a required skill set with the ability to troubleshoot and train others. Moderate Complexity - parts which have at least one single, very tight (.0001”) tolerance feature and/or multiple close (.001”) tolerance interrelated features High Complexity - parts which have two or more very tight (.0001”) tolerance features and/or multiple interrelated tight (.0005”) and/or close (.001”) features Requirements: We are looking for experienced and creative machinist who like to tackle the toughest work. Machinist that are successful here have solid experience in Job Shop/ Short run shops and are able to program, setup and run their own work. Having a sold foundation in GD&T as well as inspection of in process parts is a must. If you are a machinist that likes to think, problem solve and make some very interesting and important parts there is truly no better place to work. We have a great benefits package and treat our employees right.

Job DescriptionDescription: Electric Machinery Company. a division of WEG Electric Corp. Minneapolis, Minnesota POSITION: Design Drafter DEPARTMENT: Engineering Department Primary Objective of the Position: The Design Drafter will create and maintain designs, layouts, drawings, and documentation required for product lines, which include motors, generators and magnetic drives. Will follow internal and internationals standards, as well as applicable specifications in order to achieve satisfactory product performance. Product lines contain both standard and custom designs with high engineering content. Additionally, support customer orders from the proposal phase thru the design, development, manufacturing, testing, and field service/aftermarket phases. Responsible for collaboration and sharing of best design practices within the WEG Company Major Areas of Accountability: • Responsible for creating and maintaining standards, designs, drawings, and specifications for quotations, products, and aftermarket., • Responsible for creating project schedules to complete projects in required time., • Resolves production problems, and render technical and process assistance to shop., • Ensures manufacturability input provided by Manufacturing Engineering is incorporated into designs., • Provides support to Marketing on inquiries and new orders to assure technical and economic feasibility., • Performs other activities as required by the Leader or Product Engineering Manager. Knowledge / Skills / Abilities: • 2 years technical college, 2 years college pre-engineering, Drafting Certificate or equivalent., • 0 - 7 years’ experience building on the Detail and Layout Drafter., • Knowledge of documentation requirements of ISO 9001., • Proficient with SolidWorks, AutoCAD, Microsoft Office Products including Word, Excel, PowerPoint and Project., • Self-starter, results-oriented, flexible, and team player., • Excellent written and verbal communications skills with internal and external customers., • Demonstrated ability to efficiently and effectively manage multiple, changing priorities and problem-solve simultaneously., • Demonstrated record of managing projects that produce quantifiable-bottom-line results., • Ability to communicate effectively both verbally and in writing both internally and with customers. Physical Requirements • Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery. Have the physical ability to lift and carry up to 25 pounds unassisted., • Must be able to travel internationally. Salary: $60k to $70k Will compensate with experience. Position is full-time. Company cannot provide sponsorship for this position Please, no agencies Requirements:

Job Description About Us: At REVIVA we are looking for a talented individual driven to work on a team in a fast paced environment dedicated to excellence and superior customer satisfaction. We have provided high quality re-manufactured diesel and gas engines and components for over 80 years. A family owned and operated company that has grown into the largest independently owned and operated engine re-manufacturer in North America. We are hiring a 1st shift Production Supervisor at our Company Headquarters, conveniently located off 694 and University Avenue in Fridley, MN. Summary: Reviva seeks a passionate leader to join our growing team. In this critical role, you'll be the driving force behind ensuring the safe, efficient, and high-quality production of Reviva components. You'll lead and motivate your team to consistently deliver exceptional results. Responsibilities: • Day-to-day leadership of Reviva production employees., • Provide ongoing leadership and direction to Team Leads and Manufacturing Techs., • Align teams focus on Safety, Quality, Delivery, Cost (SQDC) and Culture to ensure you are driving expected behavior and results., • Ensure quality product is flowing through the department on time to meet customer expectations, proactively removing obstacles for employees as necessary., • Monitor the performance of team members to ensure they are meeting expectations., • Partner with Human Resources to interview and hire new employees for your department., • Manage internal customer/supplier relationships between your own and adjacent departments., • Maintain ongoing communication with Production Manager concerning performance in Machining., • Effectively communicate with employees at all levels of the organization., • Lead and support lean and continuous improvement initiatives to always improve, • Maintain a safe environment for employees, proactively looking for ways to reduce accidents to zero, • Comply with company and department policies, processes and procedures as well as applicable laws and regulations., • Step in to lead other departments to cover for vacations or absences., • Perform other duties and responsibilities as assigned. Qualifications: • Bachelors Degree or Post High School education preferred., • 5+ years of manufacturing experience., • Previous Leadership experience as a Supervisor or Lead required., • Demonstrated ability to lead, motivate, and influence others to attain objectives., • Positive attitude and strong ability to grow and shape shop floor culture., • Strong problem-solving and analysis skills., • Outstanding communication skills, both oral and written., • Continuous Improvement and/or Lean experience preferred., • Systems skills in MS Office and ERP systems., • Display strong emotional intelligence by recognizing own emotions & their effects, while knowing strengths and limitations, • Ability to build relationships at all levels of the organization, • Personal alignment with Reviva’s Core Values, • Do What You Say, • Be A Winner, Have Grit, • Always Improve, • Every Individual Counts Work Environment/Physical demand: This position offers a unique work environment that combines the hands-on experience of a manufacturing floor with the focus and collaboration of an office setting. You will spend time on our fast – paced manufacturing floor working alongside and overseeing skilled operators, while also dedicating time for administrative and operational duties sitting at a desk and attending necessary operational meetings utilizing computer and software systems. The shop floor is fast paced and is usually hot and/or humid during peak summer months. PPE required at all times on the manufacturing floor. Benefits: Reviva offers a comprehensive benefits package to all full time employees including health, vision and dental insurance plus a 401k with a company match, PTO, Holiday pay, short term disability, life insurance, and employee assistance programs. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description Production Manager Role & Responsibilities Here is the role description and breakdown of responsibilities for the Production Manager position. One of the most important things to note about this role is that no prior experience is required. We will train them on everything. However, to be successful, the candidate must bring the following traits to the table: ● High attention to detail and uncompromising standards. ● A strong process and efficiency mindset. ● Excellent people skills with the confidence to motivate and direct teams. ● A natural understanding of how things are made. Here is the roadmap for what their training and eventual responsibilities will look like: Phase 1: Hands-On Floor Training (First Few Months) They will spend 100% of their time learning how to perform every manufacturing function at CSI Creative so they can become highly proficient in all production inputs. This includes: ● CNC Zund cutting. ● Hand glue assembly. ● Laminating material and cutting metal. ● Learning to read and interpret shop drawings, assembly instructions, and production release packets (including dimensions and CAD drawings). Phase 2: Team Leadership & Quality Control Once they understand the floor, they will transition into a leadership role where they will: ● Direct the team and clearly explain how to execute specific jobs. ● Drive product quality improvements and oversee quality assurance. ● Manage the team's individual quotas and daily production output. ● Solve conflicts and effectively manage personnel. Phase 3: Scheduling & Office Coordination In the final phase of their onboarding, they will step into the broader management duties: ● Train directly with Nate to learn how to schedule production. ● Act as the primary point of coordination between the production floor and the office project management team. Company DescriptionLabor Solutions, LLC is a leader in the professional, temporary, and direct hire industry throughout the Midwest area. Our clients range from individual entrepreneurs to large corporations, and while we are big enough to serve Fortune 100 companies, we are small enough to stay nimble in an always-changing market. Thank you!Labor Solutions, LLC is a leader in the professional, temporary, and direct hire industry throughout the Midwest area. Our clients range from individual entrepreneurs to large corporations, and while we are big enough to serve Fortune 100 companies, we are small enough to stay nimble in an always-changing market.\r\n\r\nThank you!

Job DescriptionDescription: About the Role We are seeking an experienced Manufacturing Engineer to serve as the primary technical engineering resource across our manufacturing operations in Plymouth, MN, with future support at our Hastings location. This is a highly visible, hands-on role where you will lead manufacturing improvement efforts, solve complex technical challenges, and drive initiatives that enhance quality, efficiency, safety, and customer satisfaction. This is more than a traditional manufacturing engineering position. As our organization continues to grow and invest in new capabilities, this role will play a key part in shaping the future of our operations. You'll have the opportunity to influence manufacturing strategy, introduce new technologies and processes, improve production performance, and help build scalable systems that support long-term growth. Success in this role requires someone who enjoys being on the shop floor, partnering closely with operations teams, and turning ideas into practical solutions. You'll work across departments, lead impactful projects, and have the autonomy to identify opportunities and implement meaningful improvements. If you thrive in a fast-paced manufacturing environment, enjoy building and improving systems, and want to make a visible impact on a growing organization, we'd love to hear from you. Requirements: What You Will Do • Scope, design, build, and validate new manufacturing equipment, tooling, and process improvements., • Develop and implement manufacturing processes, work instructions, test procedures, and APQP documentation for new and existing products., • Create and maintain preventative maintenance procedures, troubleshooting guides, calibration procedures, and training materials., • Support equipment maintenance and repair activities to maximize uptime, reliability, and production efficiency., • Lead continuous improvement initiatives using lean manufacturing principles to optimize workflow, productivity, equipment utilization, and facility layout., • Analyze production, labor, and material data to support informed business decisions and future planning., • Partner closely with production teams to provide day-to-day engineering support and technical problem-solving., • Apply risk management practices to manufacturing operations in collaboration with the Quality Manager., • Lead or support root cause investigations using structured problem-solving methodologies such as 8D and 5-Why., • Drive corrective actions through implementation and closure to improve product quality and operational performance., • Support disposition activities related to non-conforming product, including rework, vendor returns, sorting, and scrap reduction efforts., • Own equipment validation, qualification, and measurement system analysis (MSA) activities for manufacturing processes., • Collaborate with Sales and Customer Service teams to address manufacturing-related customer inquiries and technical questions., • Support site quality initiatives in partnership with the Quality Manager., • Ensure manufacturing processes, equipment, and documentation meet applicable quality, safety, and regulatory requirements. What We Are Looking For We're looking for an engineer who combines strong technical expertise with a practical, collaborative approach. The ideal candidate enjoys being on the manufacturing floor, working alongside operations and finding creative ways to improve processes and performance. • 5+ years of hands-on manufacturing engineering experience, preferably in hydraulics, pneumatics, fluid power, or related industrial environments., • Proven ability to design, build, validate, and improve manufacturing equipment and processes from concept through implementation., • Experience working within ISO 9001 or similar Quality Management Systems., • Strong understanding of structured problem-solving methodologies including 8D, 5-Why, FMEA, and APQP., • Experience leading engineering projects and collaborating with cross-functional teams., • Proficiency with SolidWorks or similar 3D CAD software., • Familiarity with electrical systems, industrial automation, and PLC controls., • Exposure to machining, fabrication, grinding, CNC operations, or related manufacturing processes., • Strong communication skills with the ability to translate technical concepts into practical solutions for diverse audiences., • A collaborative and approachable style that builds strong working relationships across engineering, operations, quality, and leadership teams. Preferred Qualifications • Experience leading lean manufacturing, kaizen, or value stream mapping initiatives., • Familiarity with measurement system analysis (MSA) and equipment qualification/validation activities., • Experience developing preventative maintenance programs and reliability-focused manufacturing practices., • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related technical field (or equivalent experience)., • Experience serving as a technical leader, mentor, or subject matter expert within a manufacturing environment.

Job DescriptionSalary: Assistant Project Manager Owner's Representative (Interior Fit-Out) Location: On-site, full-time Reports to: Project Executive Position Summary The Assistant Project Manager (APM) serves as part of the Owner's Representative team, stationed full-time on-site to oversee the General Contractor (GC) and trades throughout an interior fit-out project. The APM protects the Owner's interests by monitoring quality, schedule, budget, and contract compliance, while serving as a daily point of coordination between the GC, design team, consultants, and ownership. Key Responsibilities On-Site Oversight & Quality Control • Maintain a daily on-site presence to observe and document construction progress, workmanship, and conformance to drawings, specifications, and design intent., • Identify deficiencies, non-conforming work, and deviations from contract documents, and escalate to the GC and senior team for resolution., • Monitor that work is installed per approved submittals, shop drawings, and applicable codes. Schedule Management • Track GC progress against the baseline and look-ahead schedules; flag delays, sequencing conflicts, and recovery needs., • Monitor long-lead items, FF&E deliveries, and trade coordination affecting the critical path. Cost & Contract Administration • Assist in reviewing GC pay applications, change order requests, and backup documentation to verify accuracy and entitlement., • Help maintain budget tracking, cost reports, and forecasts; identify potential cost exposures early., • Track RFIs, submittals, and changing events to support timely Owner decisions. Coordination & Communication • Coordinate with the architect, engineers, designers, and specialty consultants to resolve field issues and clarify design intent., • Attend and document OAC (Owner-Architect-Contractor) meetings, prepare meeting minutes, and follow up on open action items., • Serve as a daily liaison between the GC and the Owner's team. Documentation & Reporting • Produce daily reports, progress photos, and field observation logs., • Maintain organized project records, including correspondence, logs, and contract documentation., • Prepare status updates and reports for senior management and ownership. Closeout & Quality Assurance • Manage and verify punch list completion., • Support commissioning, inspections, permit close-out, and the turnover of O&M manuals, warranties, and as-builts. Safety & Compliance • Monitor that the GC maintains a safe job site and adheres to OSHA and project safety requirements (oversight role; enforcement remains the GC's responsibility). Qualifications • Bachelor's degree in Construction Management, Engineering, Architecture, or related field (or equivalent field experience)., • 5+ years of construction project experience; owner's representative, interiors, or commercial fit-out experience preferred., • Working knowledge of construction means and methods, MEP systems, and interior finishes., • Ability to read and interpret construction drawings, specifications, and contracts., • Proficiency with Procore (or similar), Bluebeam, MS Project or Primavera P6, and Microsoft Office., • Strong organizational, written, and verbal communication skills., • OSHA 30 certification preferred., • Ability to be on-site full-time and navigate active construction environments

Job Description Pro Services is excited to announce a direct hire position for a Maintenance Manager with one of our valued customers. If you are a proactive leader who is passionate about safety and operational excellence, this is your chance to join a dynamic team! Key Responsibilities: • Safety First: Champion a culture of safety, ensuring it remains a core value in all operations., • Collaborative Problem-Solving: Work closely with our leadership team and field experts to troubleshoot and resolve challenges related to safety, maintenance, production, quality, and delivery., • Daily Operations Oversight: Supervise the daily activities of maintenance technicians and the maintenance shop to guarantee the optimal performance of production equipment., • Technical Expertise: Utilize your general mechanical aptitude in electrical, pneumatic, hydraulics, pumps, and piping to enhance operational efficiency., • Financial Acumen: Manage financial budget planning and oversight to ensure responsible resource allocation., • Supplier Relations: Cultivate and maintain strong relationships with suppliers and vendors to support our operational goals., • Project Management: Lead engineering and capital projects, including budget creation, contractor management, and ensuring timely project execution., • Continuous Improvement: Support and spearhead continuous improvement initiatives (kaizens) to enhance processes and performance., • Work Order Management: Leverage plant CMMS to create, assign, and schedule work orders effectively., • Preventative Maintenance: Drive a robust preventative maintenance program aimed at minimizing reactive maintenance and maximizing uptime., • Scheduled Maintenance Collaboration: Partner with production teams to strategically schedule downtime for preventative maintenance tasks., • Mechanical Integrity Development: Develop and implement a comprehensive mechanical integrity program., • Compliance Leadership: Create procedures that align with Quality Management System (QMS) policies., • Management of Change: Lead and execute Management of Change (MOC) processes., • Hands-On Support: Provide technical support for troubleshooting and maintenance repair activities to minimize production downtime. Qualifications:, • Required: 3 years of management experience in an industrial maintenance setting ., • Preferred: B.S. in Mechanical Engineering or B.S. in Electrical Engineering., • Preferred: Experience with SAP ERP and MVPOne CMMS., • Preferred: Familiarity with the chemical industry and batch processing technologies is a plus.

Job DescriptionBody Shop Technician Department: Body Shop / Collision Repair Reports To: Body Shop Manager Overview The Body Shop Technician is responsible for performing high-quality collision repairs, structural work, and refinishing preparation on commercial trucks, fleet vehicles, and heavy-duty equipment. This role requires strong technical skill, attention to detail, and a commitment to safety, quality, and efficiency. By following manufacturer repair procedures, industry standards, and safety guidelines, the Body Shop Technician ensures vehicles are restored to pre-accident condition and returned to service on time. This position plays a key role in customer satisfaction, repair quality, and overall shop productivity. Benefits Health Insurance 401(k) Retirement Plan Paid Time Off (PTO) Competitive Wages Flexible Scheduling Key Responsibilities Prepare vehicles for repair by reviewing work orders, damage estimates, and manufacturer repair procedures. Perform collision repairs including structural repairs, panel replacement, welding, straightening, and alignment of damaged components. Repair or replace damaged body panels, frames, doors, bumpers, and related components to meet quality and safety standards. Perform metal work, plastic repair, and body filler application to restore vehicle surfaces prior to refinishing. Ensure repairs are completed efficiently and accurately while maintaining a clean, safe, and organized work area. Document repairs, parts usage, and additional repair recommendations accurately within repair orders and estimating systems. Collaborate with estimators, painters, and management to ensure repair quality, timelines, and customer expectations are met. Maintain and properly use shop tools, welding equipment, frame machines, and measuring systems. Follow all safety protocols, OSHA standards, and manufacturer guidelines to promote a safe working environment. Stay current with industry trends, repair techniques, and evolving vehicle construction materials. General Knowledge and Skills You Will Need Strong understanding of collision repair processes, structural repair techniques, and body shop equipment. Ability to read and interpret repair estimates, OEM repair procedures, and technical documentation. High attention to detail with a focus on quality workmanship and safety compliance. Strong time-management and organizational skills to meet production goals and deadlines. Ability to work independently while collaborating effectively with team members across the body shop. Commitment to continuous learning and adapting to new materials, tools, and repair technologies. Desired Education and Experience High school diploma or equivalent Previous experience as a body shop technician or collision repair technician preferred I-CAR training or certifications a plus This job description is not intended to be an exhaustive list of all duties, responsibilities, or requirements. The dealership reserves the right to modify or assign additional responsibilities as business needs change. We are an Equal Opportunity Employer.

Job DescriptionDescription: Summary Zero-Max, Inc., a trusted leader for over 75 years specializes in the manufacturing of motion control and power transmission components. Our product offerings include Composite Disc Couplings, Servo Couplings, Offset Couplings, Torque Limiters, Right Angle Gear Drives, Linear Actuators, and Mechanical Variable Speed Drives. We deliver both off-the-shelf standard products and entirely custom designs tailored to specific application requirements. Our team is dedicated to providing innovative and reliable solutions to meet diverse engineering needs. Our Core Values: 1. Provide best in class service and solutions, 2. Do the right thing, 3. Hold ourselves accountable Zero-Max is a newly renovated office and manufacturing facility located on scenic grounds in Plymouth, MN. We are proud of our employees’ years of service and are dedicated to offering competitive benefits and pay, including: • Robust health, dental, and vision plans, • 401(k) plan with a generous 6% match plus a 4% discretionary profit-sharing plan, • Generous Paid Time Off (PTO) and paid holidays, • Employer paid disability insurance, • Training, mentorship, and coaching from leadership, • Healthy work/life balance, • Other fringe benefits in a fun and welcoming environment that sets us apart from most companies! Zero-Max is currently recruiting for a Maintenance and Tool Room Manager is responsible for all building and equipment improvements and maintenance. Designs, builds, and maintains required tooling and fixtures for production machining of all Zero-Max products; manages Tool Room and Maintenance employees. ESSENTIAL DUTIES AND RESPONSIBILITIES Machine Shop • Plan, coordinate, and schedule all preventative maintenance and repair activities, • Analyze, diagnose, and repair CNC equipment, including mechanical, hydraulic, and electrical systems, • Plan and oversee all installation activities, • Analyze and diagnose machining and tooling issues, • Oversee and support TIG welding of products, • Perform TIG welding in absence of welder, • Ensure that safety program and initiatives are followed and recommend changes to ensure safety Tool Room • Design and build tools and fixtures for production machining, • Coordinate the machining and construction of tools, gauges, fixtures, etc., • Check tools to ensure that precision standards are met., • Requisition of the purchase of small tooling requirements., • Oversee critical spare part stock and orders components as necessary Facilities • Conduct regular inspections of facilities to detect and resolve problems, • Manage relationships with contractors and service providers, • Partner with leadership and assist with all shop and office projects, • Communicate openly with leadership team and inform them of potential problems and/or solutions Supervisory Responsibilities • Provide overall supervision of Tool Room and Maintenance employees, • Responsible for all aspects of performance management including interviewing, hiring, training, planning, assigning and directing work in addition to appraising performance, resolving problems, and acting on opportunities, • Demonstrate our core values of best-in-class service and solutions, hold ourselves accountable, and do the right thing Requirements: JOB REQUIREMENTS Essential Knowledge, Skills and Abilities • Knowledge and proven success of preventive maintenance practices in a machining environment., • Ability to troubleshoot issues and coordinate timely solutions, • Ability to manage multiple priorities, • Skill in maintaining accurate records, logs, and documentation, • Ability to work independently and make sound decisions, • Strong customer service focus when working with employees at all levels and areas of the building, and vendors, • Strong communication skills at all levels, • Ability to foster a safe and positive environment, • Strong organizational skills, • Project management skills, • Contract management skills for overseeing vendor agreements, • Experience supervising staff, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plain and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. EDUCATION and/or EXPERIENCE • High School or equivalent required; with some appropriate post-secondary related education, • Eight to ten years of general machine shop experience including welding, and/or three to five years of tool & die experience, and/or three to five years maintenance experience., • Three to five years supervisory experience., • Must have experience maintaining CNC Mills and Lathes., • ERP experience; Epicor a plus, • Microsoft Office experience PHYSICAL DEMANDS AND WORK ENVIRONMENT • Typical of a Manufacturing Environment, • While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration., • The noise level in the work environment is usually loud., • Regularly required to stand; use hands to finger, handle, or feel objects, tool, or controls; and talk or hear., • Required to walk, sit, and reach with hands and arms., • Occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Zero-Max is proud to be an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. – Veteran/Disability

Job Description Turbo Tim’s mission is to offer exceptional service in order to help our customers feel safe on the road and comfortable in our shop. We strive to fulfill this mission, daily, through compassionate listening, attention to detail, and excellent communication for both our customers and internally among team members. And we gotta have fun! We are only looking for the best at this time. Have you won awards at your previous employment, then we want you! Have you competed on a team and scored the highest, then we want you! Currently we are only looking for the best most driven people who want to win. Position Overview: As the Service Manager, you will oversee the daily operations of the service department, lead and mentor service advisors, work in concert with the Shop Foreman and Technicians and ensure all services meet Turbo Tim's high standards of quality and customer satisfaction. This role requires a STRONG strategic leader with well versed technical understanding, a focus on customer service, and the ability to drive results through efficient processes and team development. Key Responsibilities: Customer Experience: Ensure a welcoming and professional environment for all customers, addressing their needs with care and attention to detail. Monitor customer satisfaction and handle any escalated concerns, ensuring positive outcomes and maintaining a high retention rate. Develop long-lasting relationships with customers through transparent communication, trust-building, and exceptional service. Lead the service team in delivering prompt, accurate estimates and ensuring timely communication with customers throughout the repair process. Team Leadership & Development: Supervise, train, and mentor service advisors to ensure exceptional performance and customer service standards are consistently met. Set clear performance goals and expectations for the service team, monitoring progress and providing coaching or feedback as necessary. Conduct regular team meetings to keep everyone aligned with company goals and ensure a cohesive, motivated work environment. Assist in recruiting, onboarding, and training new team members to strengthen the service department. Operational Management: Oversee the service department’s workflow, ensuring efficient scheduling of repairs and maintenance to maximize productivity and minimize downtime. Monitor key performance indicators (KPIs), such as repair order completion times, labor hours, and gross profit margins, adjusting processes as needed to meet performance targets. Manage parts orders and inventory in collaboration with the parts team, ensuring timely availability and proper tracking of all components. Implement and maintain standardized processes to improve service efficiency, accuracy, and quality. Review repair orders for accuracy, ensuring all parts and labor charges are properly documented, and warranty claims are handled according to guidelines. Financial Oversight: Track and report financial metrics such as sales, costs, and profitability, using data to identify areas of improvement and drive strategic decisions. Ensure all transactions, including repair orders, warranty work, and third-party claims, are properly processed and recorded. Collaborate with the Office Manager/Controller to manage department budgets and ensure all expenses are accounted for. Facilities & Equipment: Maintain a safe, clean, and organized shop environment, ensuring all equipment is in good working order and scheduling repairs or upgrades as needed. Coordinate with the building maintenance team to address any facility-related concerns in a timely manner. Continuous Improvement & Growth: Stay updated on the latest industry trends, tools, and technologies to ensure Turbo Tim’s remains at the forefront of the automotive repair industry. Identify and implement improvement opportunities to enhance customer satisfaction, service delivery, and operational efficiency. Promote and participate in training programs, both for personal development and to enhance the skills of the service team. Qualifications: Proven experience as an Automotive Service Manager or similar leadership role within the automotive repair industry. Strong technical knowledge of automotive systems and repair processes. Demonstrated ability to manage a team, including coaching, mentoring, and performance management. Excellent communication and interpersonal skills, with a strong focus on customer satisfaction. Solid organizational skills, with the ability to manage multiple priorities and meet deadlines in a fast-paced environment. Experience using automotive software and management tools (e.g., Google Sheets, QuickBooks, or shop management software). Understanding of financial metrics, including labor efficiency, parts sales, and gross profit margins. Strong problem-solving skills, with the ability to resolve customer issues and operational challenges efficiently.

Job DescriptionDescription: Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, Minnesota Position: Business Development Manager – Service Department: Steam Turbines Solutions Sales & Service Primary Objective of Position: The Business Development Manager (BDM) is responsible to provide industry-leading service for large industrial motors, generators, and turbines to our customers worldwide. This includes accountability for growth of the motor, generator, and controls portion of WEG Engineered Services and Aftermarket Business; finding opportunities to cultivate and build relationships with all levels of customers. The BDM will be supporting/visiting customers located in the Southeast Region (FL, AL, GA, MS, NC, SC, & TN). Major Areas of Accountability: • Responsible for focusing on aftermarket business development and sales activities for WEG and non-WEG products; parts, services, repair, brush-to-brushless conversions, and other engineering services., • Develops close working relationships with users (and, where necessary, distributors) within various industry segments; Oil & Gas, Power, Pulp & Paper, Mining / Aggregates and Steel., • Develops close working relationships with WEG factory and WEG partners., • Responsible for sales-related activities; include generation of order-capture activities required to support bookings / sales growth from existing customers and cultivation of new customers., • Responsible for developing sales and call strategies; increase exposure at Users and distributors., • Leads and takes ownership; requesting feedback from customers., • Identifies project / customer details vital for determining quotation strategy., • Assists in creating accurate quotations to customers of WEG’s offering., • Partners with WEG entities and service partners to meet customer expectations., • Develops industry experience; attend industry-specific conferences read periodicals, internet research, site visits, etc.) and report activities quarterly to management., • Mentors and trains junior team members., • Domestic and international travel of up to 100%., • To perform this job successfully; must be able to perform Major Areas of Accountability satisfactorily, success will be measured by bookings and quarterly reports. Knowledge / Skills / Abilities: • BS Degree in Marketing, Business, Industrial technology or related field, or 2+ years of general industrial inside sales experience., • Demonstrated sense of urgency to affect timely response and resolution to customer requests., • Proven ability to keep multiple tasks and activities coordinated, prioritized, documented, and in motion or progress at one time., • Demonstrated capacity for social interface with internal and external customers as required, achieving customer satisfaction excellence., • Proven ability to effectively deal with difficult customers through oral and written communication., • Proficient MS Suite programs., • Exceptional verbal and written communication skills with Inside Service Sales Support and Customers effectively., • Self-starting, results oriented, flexible, and team player. Physical Requirements: • Ability to travel freely within manufacturing and office facilities., • Ability to climb stairs and move over, around, and shop machinery., • Ability to lift and carry up to 45 pounds unassisted. Salary ranges from, $115,000 to $125,000 Will compensate with experience. Position is full-time. Company cannot provide sponsorship for this position Please, no agencies Requirements:

Job DescriptionSalary: $100K - $130K + Motor Works Auto in Blaine, MN is looking to hire a full-time Auto Repair Shop General Manager to oversee our car shop and manage our team. Do you have strong automotive skills? Are you looking for a work environment that is supportive and optimistic? Would you like to lead a team that is skilled, works hard, and has fun? If so, please read on! This automotive management position earns a solid base pay plus a monthly bonus which equates to about $100,000 - $130,000/year. We also provide awesome benefits, including 100% company-paid medical, dental, and vision insurance as well as a 401(k) with match, paid vacation, one of the most competitive pay plans in the area, lots of available work hours, training, new equipment and no weekends. If this sounds like the right automotive management opportunity for you, apply today! About Motor Works Auto We are a full-service automobile company that fixes all makes and models. Founded in 2004, we started in St. Augusta as Augusta Motor Works. We took off from there and now have multiple locations throughout Minnesota where our customers can find quality, friendly and local automotive services. Providing our customers with the highest level of service is our primary goal! We are always looking for great people to join our amazing team. We provide an excellent workspace by making sure that our operations are always organized and efficient. Our company is family-friendly and filled with skilled professionals and a supportive management team. We also offer great benefits and opportunities for advancement. If our employees win, we win! A Day in the Life of an Auto Repair Shop General Manager As an Auto Repair Shop General Manager, you maintain our operations, help customers, and oversee the team. You greet every customer who enters our facility with hospitality and the highest level of respect. Simply and clearly, you present the best solution for car repairs and handle any other questions or concerns they may have. You also consistently and effectively sell our services without jeopardizing honesty or integrity. Managing around 8 - 10 employees, you oversee the store's workflow in an effective manner. Your leadership inspires hard work, positive attitudes, an open space for communication, and great working relationships. You enjoy helping your team and seeing the business thrive! Qualifications • 5+ years of experience in automotive repair, preferably in fixed operations or service management, • Experience with automotive repair estimation and repair order generation, • Experience with key performance indicator (KPI) reporting (ticket averages, car counts, labor, and parts reporting), • Leadership skills Do you have the ability to mentor and train others with patience and professionalism? Are you reliable and honest? Can you work well with others? Do you have excellent communication skills? Are you detail-oriented and organized? If yes, you might just be perfect for this automotive management position! ARE YOU READY TO JOIN OUR AUTOMOTIVE TEAM? If you feel that you would be right for this Auto Repair Shop General Manager job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you!

Job DescriptionThe Specialty Mfg. Co. is a vertically integrated company offering the industrial and manufacturing sectors a one-stop-shop solution for products, machining, molding, and light assembly. From stock items to the design and production of custom parts and machinery, our five divisions provide the solutions and support you need every step of the way. The Production Planner will be primarily responsible for the planning and organization stages of production to meet our customer requirements and our 95% on-time delivery. Essential Job Functions • Plan and organize the production schedule., • Establish floor priorities provide work direction in absence of Manager or Supervisor., • Provide guidance to Production Planners and Assistant planners as necessary., • Run daily production meeting., • Provide backup support of planning activities to area manager., • Release and print job packets., • Request components from assembly to cover production requirements in second operations., • Plan and organize the building of sub assemblies and units., • Update weekly capacity charts., • Help to ensure accurate routing standards by comparing run vs actual., • Work with appropriate areas to resolve cost, quality, delivery, and material issues., • Assist with labor reporting and weekly time card processing., • Monitor and analyze inventory., • Vendor Service purchase orders., • Assist in setting priorities and suggesting ordering raw stock., • Any other duties as assigned by management.Job Qualifications Education and Experience: • High School Diploma or GED required, Bachelor’s Degree in Supply Chain or similar field preferred, • APICS Certification preferred, • ERP Management experience, Epicor Kinetic highly preferred, • 4 years’ experience in a planning or supply chain role (preferred in manufacturing)Knowledge/Skills:, • Proven organizational and planning skills, • Time management skills, • Ability to work across all functions of manufacturing and office, • Mature interpersonal skills. Compensation and Benefits Expected Compensation Range: Hourly, non-exempt- $25-$33 Specialty Manufacturing is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, and abilities. Specialty Mfg. provides a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings, focused on providing health and financial stability throughout the employee’s career. Specialty Mfg. operates an onsite work environment where employees are expected to work in the office 5 days per week. Powered by JazzHR 1km0I5qYQ4

Job Description GENERAL SUMMARY The Machinist is responsible for fabrication and layout on a variety of parts or products involving close tolerances. Must set up and operate all machine shop machines to cut, bend, machine or form parts. ESSENTIAL FUNCTIONS -Responsible for quality of work performed in machine shop area. Accountable for fabrication and layout on a variety of parts or products involving close tolerances. Must set up and operate all machine shop machines to cut-bend, machine, or form parts. Uses a variety of machine shop hand tools and measuring instruments. -Assists Lead in all functions of the machine shop including workflow and process improvement. -Responsible for keeping both machinery and plant area in good working order, including cleaning and maintenance of machine shop equipment and all tools involved in daily production. -Abides by all policies, procedures, and guidelines of the company including good common sense safety practices. -Adheres to the Company Core Values: Performance Driven, Quality in All We Do, Act with Integrity and Professionalism, Collaborative Continuous Improvement, Be Safe, and Impress the Customer. -Adheres to the Company CARE Initiative: Commitment, Accountability, Responsiveness, Effort -Performs all job assignments as instructed by the Lead, Manufacturing Supervisor, Plant Manager and/or Vice President of Operations. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED EDUCATION and/or EXPERIENCE High School Diploma or general education degree (GED) plus one-year certificate from college or technical school and five years related experience and/or training; or equivalent combination of experience and training. LANGUAGE SKILLS Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Must have working knowledge to read and interpret prints. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Basic skills in CNC programming and precision hand tools are required. Technical training with emphasis in machining and related subjects highly desirable. EQUAL OPPORTUNITY EMPLOYER A background and drug screening will be conducted for employment purposes

Job Description SENIOR BIM SPECIALIST This position is based out of our Fridley, MN office. About ArchKey ArchKey is one of the nation’s largest privately held specialty trade installation and integrated facility service companies. We are a leader in designing, building and maintaining electrical, technologies and specialty systems. We’re the POWER behind making the improbable possible. We’re electrifying the nation, energizing the future and bringing communities to life like never before. What we do today shapes the vision of tomorrow. Our work impacts lives long after the building is done. This means we are committed to building in ways that are not just technologically advanced, but sustainable, scalable and equitable by all. We’re not just energizing infrastructure, we’re energizing careers, communities, and the future. Made up of the brightest minds in the industry, our team is our greatest asset, bringing knowledge, skills, and experience to every project. This is more than a call to join us, it’s an invitation to be part of a visionary journey, to grow with us as we scale. About the Position As a Senior BIM Specialist, you will be responsible for providing building information modeling (BIM) services for Company projects and assisting in the development of fully constructible 3D models and detailed construction documents as necessary to support field electricians with challenging electrical installations. The Senior BIM Specialist plays a key role in collaborating with project managers and other internal and external team members that involves project planning as required for each specific project. Our Ideal Candidate • Has a growth mindset and is always looking to continually learn and grow., • Is detail oriented and has strong organizational skills., • Can work independently and meet deadlines with minimal oversight. Day in the Life • Executes and tracks daily work plans. Provides recommendations for changes to improve standards and procedures, as necessary. Provides technical support to project managers, field personnel, estimators, and customers. Responds to questions and addresses problems with appropriate resolutions and plan revisions as needed., • Works closely with design teams while applying detailed attention to modeling, clashing and annotating sheets. Gathers and requests specific information from other design disciplines necessary to move forward and complete electrical designs on schedule. May review the work of co-workers as needed., • Produces constructable 3D model content and detailed electrical construction installation documents. Completes 2D and 3D drafting tasks to support electrical construction initiatives, utilizing standard Company software, such as Autodesk software., • Develops conceptual designs, sketches, or value engineering ideas to help project managers or estimators prepare estimates. Prepares calculations, specifications, cable pull schedules, reports and other documents as needed. Coordinates this type of work with other employees as needed., • Consults with vendors and reviews project shop drawings for design accuracy and contract requirements. Works with project managers as needed to develop engineered construction installation drawings from contract documents developed by outside firms., • Attends BIM coordination meetings and maintains appropriate communications with all appropriate parties as needed. Make plan changes according to feedback received. Escalates cost and scheduling issues to manager., • Develops a high level of understanding in the installation of electrical systems, the National Electrical Code, and other building codes. Stays informed of new electrical and safety codes, materials, technologies, techniques, and practices. Participates in electrical construction-related training to maintain a high level of proficiency and updated technical skills. Minimum Qualifications • Associate degree or equivalent work experience in building information modeling (BIM) trade school, engineering, or a related field., • Minimum 3-4 years of BIM modeling experience., • Proficiency in using Autodesk, Revit, Bluebeam, and Microsoft Office software. Experience using Evolve software is a plus., • Skills to read, interpret and understand electrical contracts, plans, drawings, and specifications and basic knowledge of the National Electrical Code preferred., • Basic project management experience and skills. Understanding of the project life cycle., • A strong desire to learn more about electrical design and construction, with a commitment to being a dependable team player and growing with the Company. Travel • Occasional travel may be required. Salary Range • $69,800 - $83,800 annually, based on experience and qualifications. Benefits At ArchKey Solutions, our benefits package includes competitive health insurance options (medical, dental, and vision), a robust 401(k) retirement savings plan with employer match, paid time off and holidays, and access to wellness programs. Additionally, we offer professional development opportunities, tuition reimbursement, and employee assistance programs to support your growth and well-being. We ensure that our benefits are designed to promote the health, security, and work-life balance of our employees. Additional information is available at Archkey.com. Legal & Fraud Disclaimer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. We are an Affirmative Action, Equal Opportunity Employer. Beware of fraudulent job postings. ArchKey Solutions only communicates through official channels. All official communication will come from an @archkey.com email address and we will never ask for financial information, payments, or personal details outside of the standard hiring process. To confirm the legitimacy of a job, visit our careers page or reach out to a member of our Talent Acquisition team.

Job Description GENERAL SUMMARY The Machinist is responsible for fabrication and layout on a variety of parts or products involving close tolerances. Must set up and operate all machine shop machines to cut, bend, machine or form parts. ESSENTIAL FUNCTIONS -Responsible for quality of work performed in machine shop area. Accountable for fabrication and layout on a variety of parts or products involving close tolerances. Must set up and operate all machine shop machines to cut-bend, machine, or form parts. Uses a variety of machine shop hand tools and measuring instruments. -Assists Lead in all functions of the machine shop including workflow and process improvement. -Responsible for keeping both machinery and plant area in good working order, including cleaning and maintenance of machine shop equipment and all tools involved in daily production. -Abides by all policies, procedures, and guidelines of the company including good common sense safety practices. -Adheres to the Company Core Values: Performance Driven, Quality in All We Do, Act with Integrity and Professionalism, Collaborative Continuous Improvement, Be Safe, and Impress the Customer. -Adheres to the Company CARE Initiative: Commitment, Accountability, Responsiveness, Effort -Performs all job assignments as instructed by the Lead, Manufacturing Supervisor, Plant Manager and/or Vice President of Operations. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED EDUCATION and/or EXPERIENCE High School Diploma or general education degree (GED) plus one-year certificate from college or technical school and five years related experience and/or training; or equivalent combination of experience and training. LANGUAGE SKILLS Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Must have working knowledge to read and interpret prints. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Basic skills in CNC programming and precision hand tools are required. Technical training with emphasis in machining and related subjects highly desirable. Equal Opportunity Employer A background and drug screening will be conducted for employment purposes.

Job DescriptionDescription: Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, Minnesota Position: Service Application Engineer Department: Service Commercial Primary Objective of Position: The Service Application Engineer provides daily assistance and technical support for Electric Machinery’s large industrial motor, generator, and turbine customers worldwide. This role is responsible for prospecting new service business, quoting various services to customers, and developing sales proposals in coordination with the factories and partners delivering the best customer experience. Major Areas of Accountability: • Reviews customer inquiries; facilitates disseminating information to required parties of Field & Service Engineering, Outside Sales, and Project Management., • Confirms project requirements; through written and verbal communication with customer and supporting departments., • Promotes collaboration and success; liaison between Inside and Outside Sales., • Reviews requests for proposals (RFP’s), customer specifications, and other requirements to successfully bid projects., • Requests quotes from factories and partners, and creates quotes for customers., • Coordinates proposal development with Service Engineering, Field Service, and Outside Sales teams., • Collaboratively works with Outside Sales and Project Management to ensure successful project handoff., • Enters customers orders into EM’s Service quote database for project execution., • Maintains and develops Key Performance Indicators (KPI’s) and quote databases., • Ensures Electric Machinery’s commercial and contractual position is not compromised., • Works on various projects as directed by the Service Commercial Team Leader and Service Manager. Qualifications: • BS Degree in Marketing, Business, Industrial technology or related field., • 2+ years of general industrial inside sales experience preferred., • Demonstrated sense of urgency to affect timely response and resolution to customer requests., • Oral and written communication skills, with exceptional interpersonal skills; demonstrated ability to deal effectively with difficult customers., • Excellent time management; proven ability to independently prioritize workload and organize work activities in order to meet business needs and resolution to customer requests., • Must be able to meet tight deadlines, and multi-task on a consistent basis., • Strong capability for social interface with internal and external customers as required, achieving customer satisfaction excellence., • Demonstrated Computer knowledge of current operating systems and software common to business applications including; Outlook, Word, Excel, PowerPoint., • Working knowledge of SAP Proficiency preferred. Physical Requirements: • Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery., • Have the physical ability to lift and carry up to 45 pounds unassisted., • Physical ability to travel via public, commercial or personal transportation., • Must be able to legally drive a vehicle in the US., • Must be able to travel internationally. Salary: 60,000-70,000 Company cannot provide sponsorship for this position Please, no agencies Requirements:

Job Description Assistant Project Manager – Owner's Representative (Interior Fit-Out) Location: On-site, full-time Reports to: Project Executive Position Summary The Assistant Project Manager (APM) serves as part of the Owner's Representative team, stationed full-time on-site to oversee the General Contractor (GC) and trades throughout an interior fit-out project. The APM protects the Owner's interests by monitoring quality, schedule, budget, and contract compliance, while serving as a daily point of coordination between the GC, design team, consultants, and ownership. Key Responsibilities On-Site Oversight & Quality Control • Maintain a daily on-site presence to observe and document construction progress, workmanship, and conformance to drawings, specifications, and design intent., • Identify deficiencies, non-conforming work, and deviations from contract documents, and escalate to the GC and senior team for resolution., • Monitor that work is installed per approved submittals, shop drawings, and applicable codes. Schedule Management • Track GC progress against the baseline and look-ahead schedules; flag delays, sequencing conflicts, and recovery needs., • Monitor long-lead items, FF&E deliveries, and trade coordination affecting the critical path. Cost & Contract Administration • Assist in reviewing GC pay applications, change order requests, and backup documentation to verify accuracy and entitlement., • Help maintain budget tracking, cost reports, and forecasts; identify potential cost exposures early., • Track RFIs, submittals, and changing events to support timely Owner decisions. Coordination & Communication • Coordinate with the architect, engineers, designers, and specialty consultants to resolve field issues and clarify design intent., • Attend and document OAC (Owner-Architect-Contractor) meetings, prepare meeting minutes, and follow up on open action items., • Serve as a daily liaison between the GC and the Owner's team. Documentation & Reporting • Produce daily reports, progress photos, and field observation logs., • Maintain organized project records, including correspondence, logs, and contract documentation., • Prepare status updates and reports for senior management and ownership. Closeout & Quality Assurance • Manage and verify punch list completion., • Support commissioning, inspections, permit close-out, and the turnover of O&M manuals, warranties, and as-builts. Safety & Compliance • Monitor that the GC maintains a safe job site and adheres to OSHA and project safety requirements (oversight role; enforcement remains the GC's responsibility). Qualifications • Bachelor's degree in Construction Management, Engineering, Architecture, or related field (or equivalent field experience)., • 5+ years of construction project experience; owner's representative, interiors, or commercial fit-out experience preferred., • Working knowledge of construction means and methods, MEP systems, and interior finishes., • Ability to read and interpret construction drawings, specifications, and contracts., • Proficiency with Procore (or similar), Bluebeam, MS Project or Primavera P6, and Microsoft Office., • Strong organizational, written, and verbal communication skills., • OSHA 30 certification preferred., • Ability to be on-site full-time and navigate active construction environments

Job DescriptionAbout the role: As an Electrical Mfg. Supervisor, you will direct electrical personnel, ensure adherence to Westinghouse safety standards and processes. Manage resources to ensure that you train, qualify, and schedule the Electrical shop personnel appropriately to support production and facility needs. You will report to the Manufacturing Manager and be located at Shoreview, MN. You will support this role 100% onsite. Key Responsibilities: • Conduct PFP meetings throughout year and merit decisions, • Address personnel performance issues, • Approve weekly time and vacation requests, • Determine training and qualifications need for each process/job/task in group, • Ensure training is assigned in PowerHub and everyone is current, • Ensure proper onboarding and a mentor is assigned for all new hires, • Support physical work for groups and as qualified to perform, • Resource manager for electrical assembly personnel, • Provide updates to P6 schedule on electrical assembly activities, • Support rescheduling of activities if there are delays, • Ensure training qualifications are completed on time and maintained properly, • Ensure resources are assigned for maintenance (PM) work tied to electrical equipment, • Support QC with any final structure as-builts, • Ensure work orders for electrical work are created upon release of a new job and before shop need, • Review and approve work orders before handing off to shop, • Ensure ECO changes are incorporated into work orders, • Estimate hours for work to make electrical assemblies in-house, • Ensure Manufacturing electrical procedures observe Level 2 procedures and current site practices., • Factory Acceptance Testing (FAT) Review and approve engineering test procedures Ensure we have proper equipment necessary for project testing Oversee FAT technicians and provide support throughout test plan Qualifications: • High School Diploma or GED required, • 8+ years' experience as an electrical technician in a manufacturing environment, • 3+ years as a manager or supervisor in a manufacturing facility.

Job Description POSITION SPECIFICATION Position: Senior Electrical Designer Department: Utilities and Central Energy (UCE) Reporting Relationship: Electrical Engineering Manager, Utilities and Central Energy COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit www.kfi-eng.com. POSITION OVERVIEW & RESPONSIBILITIES The Senior Electrical Designer, UCE plays a key role in the successful execution of projects, focusing primarily on the production of AutoCAD drawings and Revit modeling. Reporting to the Electrical Engineering Manager, the Senior Electrical Designer is responsible for producing quality construction documents and coordinating design work with other engineering disciplines. The successful candidate will be expected to work within a team environment and collaborate with other project team members. Ideally, the person filling this position will have strong electrical design experience across a variety of industrial facility types. This person will have strong interpersonal skills to enable effective interaction with Designers, Engineers and Project Managers, including mentoring entry level designers. This person will possess strong communication skills, and influencing skills, and has demonstrated the maturity and self-confidence to work with colleagues and customers. The level of experience we are looking for likely comes with a minimum of 10-15 years of experience following graduation. The successful candidate will be naturally collaborative and possess the ability to assimilate a range of ideas, programs or alternatives into a set of recommendations, while following corporate and client design standards. This person will be self-directed but thrive in an environment where consultation leads to superior outcomes. Specific responsibilities will include, but not be limited to, the following: • Industrial lighting layout and design (interior, exterior, egress/exit and lighting controls)., • Gather electrical data from clients, architects and other disciplines., • Coordinate work and construction documents with internal and external stakeholders (other disciplines, architects, owner, contractor, etc.)., • Electrical room layouts including layout of electrical equipment (transformers, switchboards, switchgear, motor control centers, panel boards)., • Size feeders and raceway (cable tray and conduit)., • Modeling of equipment and raceway in 2D and 3D, clash detection with other disciplines., • Perform voltage drop calculations, short circuit calculations., • Lead electrical 3D model reviews., • Mentorship of less experienced electrical designers., • Development of schematic and wiring diagrams., • Gather existing site data., • Write construction observation reports, etc., • Lighting layout and design (interior, exterior, and egress/exit)., • Edit schedules (motor control centers, panel boards, lighting fixtures)., • Review of shop drawings for dimensions, conduit entry and other layout information., • Effectively estimate hours and scope of work, thereby contributing to the creation of budgets and project schedules. QUALIFICATIONS Required: • Ten plus (10+) years drafting/design experience, preferably in AutoCAD and Revit, in a consulting and/or construction capacity., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Experience working in Autodesk Revit for electrical design and coordinating with other disciplines in Revit., • Ability to perform 3D modeling of electrical equipment including coordination with other disciplines., • Basic understanding of Architectural, Electrical, Civil, and Structural Engineering construction practices and drawings., • Working knowledge of Codes (e.g., NEC, NFPA, IBC, IFC, Energy Code, Life Safety Code, etc.)., • Application of Electrical Engineering Principles (e.g., Ohms’ law, overcurrent protection, grounding etc.)., • Knowledge of quality control procedures for document control purposes including QA/QC processes. Preferred: • Knowledge of SKM Power Tools for Windows, ETAP or Easy Power modeling software, • AAS Degree/Diploma in Design/Drafting CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Takes responsibility for own actions. Business Focus • Demonstrates agility, adapts well to changes., • Works well under pressure., • Meets commitments to internal/external customers. Project Execution • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes. Demonstrates Respect for Others • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Adapts communication style and method based on audience and situation. Team Player • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Managing People • Develops employees’ skills and encourages growth., • Consistently provides timely feedback to employees., • Delegates effectively, providing clear direction and authority to act. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave, • Voluntary benefits offered include life, accident, critical illness coverage Compensation: $49.50 - $61.90 per hour. The final agreed upon compensation is based on individual qualifications, experience, work location, and education. This position is eligible for an annual bonus. Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description ABCOM is now hiring installers through the JATC Apprenticeship Program and IBEW Union Locals 292 and 110. We are currently accepting applications from 4, 5, and 6 level apprentices. If you have just entered the apprenticeship or have yet to enter, we will automatically Come join ABCOM as an apprentice in the JATC Apprenticeship program. Learn the trade, go to your educational classes, and continue advancing within the JATC and IBEW Union. You can go to the JATC at www.statewidelea.org for additional information on the apprenticeship program. Purpose of this position: The Installer is responsible for successful project deployments and troubleshooting under the direction of project managers, department supervisors, foremen, and/or site leads. Gain experience in a variety of site settings, project requirements, and customer needs. Work includes voice, video, and data cabling, terminating and testing; telecommunications switch configuration and installation; fiber optic installations, termination, and testing; and security, wireless and audio-visual infrastructure installation, configuration, and troubleshooting. Responsible for safety, tools, equipment, product, and communication with lead technician/project manager. Scope of the position: This position reports to the Superintendent, or Vice President of Operations if no Superintendent. Responsibilities: • Fiber optic installation, testing, and troubleshooting, • Telecommunications entrance and facilities, • Existing network mapping and documentation, • Installation documentation, as-builts, • Wireless installations, • Daily paperwork and communications requirements per Lead/Foreman, Superintendent (SUP), VP of Operations (VPO), and/or Project Manager (PM), • Adhere to and enforce all company policies, procedures, and guidelines., • Acts as advisor to help resolve job related issues. Keep Lead/Foreman, SUP, VPO, and PM informed of technical issues related to projects and personnel, • Maintain certification status and currencies, • Attend JATC Apprenticeship program when in session (MN only), • Occasional to regular travel required. Maintain valid driver’s license and insurability, • May include in- and out-of-state overnight travel, • Must maintain a professional work ethic and progression of skill sets, • Other duties as assigned by Superintendent or VP of Operations. Matrixed ABcom relationships: Installers will work in conjunction with all other field members on and off job sites. Employee will converse with the Superintendent and Project Managers to determine schedule and discuss scope of work and other details pertaining to projects. All field members will maintain a professional relationship with customers, especially on site. Field members will occasionally act as the line of contact between various office staff and the customer on site. Additional Information: • ABcom Environment: - Fast-paced - Team Spirit - Family values - Innovative - Open Communication - Approachable leadership - Appropriate Work/Life Balance - Dynamic, • Working conditions: Position is primarily performed at the customer location so working conditions change constantly, from new construction to existing office building. Position requires monthly and other occasional shop meetings, held at the corresponding ABcom office. Physical and mental requirements: Frequently, the employee is required to travel and/or work evenings and nights. The employee will be required to perform physical labor such as lifting, bending, and pulling. May also be required to drive a company vehicle. Requirements Knowledge and Skills (Minimum requirements): • Education, credentials, licenses: High school diploma or equivalent and driver’s license. Must join the union IBEW and or have the ability to obtain acceptance into the JATC Apprenticeship program in Minnesota. Preference is given to those already accepted into the JATC program in MN., • Specialized knowledge: Knowledge of voice, video, data, and security infrastructure., • Experience: 1.5 - 3 years industry experience, • Skills: A willingness to learn and ability to work with others is a must., • Team player - Resourceful - Flexible - Accountable - Creative - Dependable - Problem-solving - Strong Work Ethic - Passion - Clear and Effective Communication - Organized and Detail Oriented This position is physically demanding and requires repeated physical movement including all of the following for extended periods of time. Although several requirements are explained in this description, this is not to be considered an entire list of all policies, procedures, and requirements. Adequate transportation is required. The responsibility of arriving to work is entirely up to each individual. A main function and requirement is to install Power Limited communication cables in pathways (ceilings, walls, and floors). The work is typically performed in office/industrial buildings where there is a controlled environment. There are times where the work is outdoors during construction and the environment is not controlled. In these situations, all field personnel must be able to perform these tasks and dress accordingly. All field personnel must be able to distinguish many different colors in different lighting situations. Must be able to communicate well in different audible environments. Required to wear different types of protective gear depending on the safety requirement. May be required to work in a confined space and at times work from aerial lifts and/or extension ladders. Cable reels can weigh from one pound to several hundred pounds. Must be capable of lifting and loading cable, supplies, tools, and equipment (up to 75lbs individually) into a vehicle for transport to/from the job site and loading/unloading into the working area. In case of any heavy lifting, teamwork, proper equipment, and safe lifting techniques are essential. Must move ladders and/or lifts into position for throwing and reclaiming cable multiple times until the final destination is reached. Required to work at heights which can be in excess of 20 feet. Cable terminations consist of inserting small, color coded wires into connectors using hand tools. This requires good hand/eye coordination and finger dexterity. The ability and safe use of power tools and test equipment is a required function of the job. Documentation is a required and essential function of the job and must be performed on daily basis with complete descriptions legibly filled out. Daily work requires considerable climbing, walking, and standing, lifting, kneeling, and reaching. Sedentary tasks such as some troubleshooting, testing and terminating procedures are unpredictable and generally last for nominal periods of time. Required to perform many tasks in uncomfortable positions such as kneeling, bending, and crawling through spaces, performing work over head with your arms extended, crouching under a desk, or standing on a ladder. Benefits Compensation: ABcom offers a competitive compensation package, including medical and dental insurance, 401(k) plan, and vacation package. Pay to be determined, based on experience and education. All field pay to be determined by IBEW union based on classification in MN.

Job Description Position is located in Brainerd, MN. We specialize in custom tooling solutions for a wide range of molding processes, including rotational molding, thermoforming, pressure forming, blow molding, reaction injection molding (RIM), and compression molding. Our reputation is built on engineering excellence, precision craftsmanship, and delivering innovative solutions that exceed customer expectations. Position Summary We are seeking an experienced and results-driven Production Manager to lead and oversee all manufacturing operations. The Production Manager is responsible for ensuring efficient production processes, maintaining high-quality standards, optimizing productivity, and managing the production schedule to meet customer delivery commitments. This leadership role requires a hands-on manager who can effectively coordinate people, equipment, materials, and workflow while driving continuous improvement throughout the manufacturing operation. Key Responsibilities • Oversee all day-to-day manufacturing operations, ensuring safe, efficient, and high-quality production., • Develop, maintain, and manage the master production schedule to meet customer deadlines and maximize shop efficiency., • Coordinate workflow between machining, fabrication, assembly, finishing, inspection, and shipping departments., • Monitor production performance, identify bottlenecks, and implement solutions to improve throughput and efficiency., • Lead, coach, and develop production supervisors and manufacturing personnel., • Ensure compliance with company quality standards and customer specifications., • Collaborate with engineering, project management, purchasing, and sales to ensure smooth project execution., • Monitor labor utilization, machine capacity, and material availability to support production goals., • Establish and track key performance indicators (KPIs) including productivity, quality, on-time delivery, and manufacturing efficiency., • Promote and enforce a safe work environment while ensuring compliance with all applicable safety regulations., • Drive continuous improvement initiatives focused on lean manufacturing, waste reduction, and process optimization., • Assist with budgeting, workforce planning, and capital equipment recommendations., • Resolve production issues quickly while maintaining customer commitments and quality standards. Qualifications • Bachelor's degree in manufacturing, Engineering, Operations Management, or a related field preferred; equivalent manufacturing leadership experience will be considered., • Five or more years of manufacturing management experience., • Strong understanding of CNC machining and fabrication., • Experience managing production scheduling., • Knowledge of aluminum mold manufacturing or plastics processing is highly desirable., • Familiarity with rotational molding, thermoforming, pressure forming, blow molding, reaction injection molding (RIM), and compression molding processes is a significant advantage., • Proven leadership skills with the ability to motivate, coach, and develop high-performing teams., • Strong organizational, communication, and problem-solving abilities., • Experience with ERP/MRP systems and production planning software., • Proficiency with Microsoft Office, including Excel. Preferred Skills • Lean Manufacturing or Six Sigma experience., • Strong analytical and decision-making abilities., • Ability to prioritize multiple projects in a fast-paced manufacturing environment., • Excellent communication and cross-functional collaboration skills., • Commitment to continuous improvement and operational excellence. What We Offer • Competitive salary based on experience, • Health, dental, and vision insurance, • Paid time off and holidays, • Retirement savings plan, • Opportunities for professional growth and advancement, • A collaborative, innovative manufacturing environment where craftsmanship and quality are valued If you are a hands-on manufacturing leader who thrives in a fast-paced custom manufacturing environment and enjoys building high-performing teams, we encourage you to apply. Company DescriptionBrainerd Lakes Economic Development Corporation is helping to hire this position for a member company. We work with companies in our area to help them expand and grow in MN.Brainerd Lakes Economic Development Corporation is helping to hire this position for a member company. We work with companies in our area to help them expand and grow in MN.

Job Description Tesoro Group is seeking an experienced Service Maintenance Manager to join their team at (12) of their properties in Minneapolis, MN. The ideal candidate will have 5 years' experience of maintenance management, hands-on maintenance, strong organizational skills and someone that will lead by example. This role is a direct hire role. Salary: $35-$40/hour DOQ. Schedule: Weekly schedule: M-F 8am-5pm. This role is contract to hire (90 days before conversion). Responsibilities and Job Duties: Under the direction of the Community Manager, the Service Maintenance Manager (SMM) is responsible for al the physical operations of the community, particularly the preservation and maintenance of the asset, preparation of market ready homes and providing ongoing service to the residents. The SMM si a working maintenance manager position requiring to lead the maintenance team members and perform hands on work duties. A primary role of the SMM is to deliver leadership, mentoring and direction to enhance the skills of employees and foster a collaborative and positive work environment in accordance with company policies and provide a quality living environment for al residents. Essential Functions: • Provide direction, guidance, and supervision to all maintenance team members and vendors/contractors at the community, • Manage and participate ni the completion of routine and preventive maintenance work orders and unit turns in a timely manner including scheduling vendor contracted services. Review completed work orders and unit turn for quality of work and repair trends to address., • Provide training to maintenance team to ensure proper performance of their functions and consistency with company policies, procedures and safety standards, • Oversee cleaning, painting, interior/exterior decorating and maintenance, landscaping, snow-removal, replacement of light, plumbing, electrical work, roof repairs, appliance evaluation and other repairs., • Manage preparation and make repairs for REAC/HQS inspections and audits., • Participate in financial review with Community Manager on maintenance, utility and capital related expenditures to meet budgeted goals and enhance knowledge of operations., • Complete budgeted capital improvements and manage vendors service contracts (HVAC, Pest, Snow, Landscaping, etc.) by developing scope of work, managing the competitive bid process, and monitoring completion of capital projects and vendor services., • Manage maintenance shop and inventory to company standards and lead with a safety mindset including wearing appropriate PPE., • Available for weekend work, on-call rotation and emergency service call duties. Physical Demands &Work Environment: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Must be able to remain in a stationary position 50 percent of the time., • Commutable radius to property, • Must be able to ascend/descend a ladder, • Frequently moves equipment weighing up to 50 pounds across sites., • Constantly works in outdoor weather conditions. Knowledge, Skills and Abilities: • Leadership skills and understanding of effective management of personal development and career paths for al employees desired, • Strong Microsoft Word, Excel, Outlook and Yardi or other industry software experience required, • Excellent verbal and written communication skills required, • Knowledge of Federal Fair Housing Laws & Guidelines a plus, • "Excellent Customer Service" skills required, • Bilingual "a plus" Education & Experience: • High School diploma or equivalent required., • 5+ years of multi-family type operational management experience, preferably with a comparable role in multi-family experience, • Experience in training, budget development and managing expenses; bid and managing vendors, service and general building contractors are essential skills., • One or more industry-Trade certifications/Degrees (NAHMS, CAMT, OSHA, HVAC, ETC) required. (Willingness to get any required certifications) within 6 months of hiring to meet any specific site/area needs., • Knowledge of all hand and power tools, cleaning supplies, and protective equipment. Tesoro Group is a leading provider of specialized talent solutions dedicated to connecting exceptional individuals with exciting career opportunities across various industries. We specialize in matching highly qualified candidates with companies seeking expertise in finance, technology, marketing, legal, administrative, and customer support roles. At Tesoro Group, we are committed to empowering you for success by providing access to top-tier positions, competitive compensation packages, comprehensive benefits, and unmatched communication and support. Tesoro Group is an Equal Opportunity Employer, and we welcome applicants from all backgrounds. We believe in creating an inclusive environment where talent thrives, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. We are committed to providing reasonable accommodation throughout the application and interview process. If you require assistance, please reach out to info@tesoroco.com. Pay offered to successful candidates is determined by various factors, including education, experience, location, job duties, and certifications. At Tesoro Group, we're dedicated to your success. Join us and embark on a journey where your talents are valued, and your career aspirations are realized. © 2026 Tesoro Group. All rights reserved.

Job DescriptionDescription: Electric Machinery Company. a division of WEG Electric Corp. Minneapolis, Minnesota Position: Human Resources Intern Department: Human Resources Primary Objective of Position: The HR Intern provides day-to-day support to the HR Team, Union and Non-union employees, and management in various HR functions; including recruitment, employee relations, records management, and administrative tasks. The role offers hands-on experience in HR processes while assisting the team in maintaining efficient and organized HR operations. Major Areas of Accountability: · Assist and support Human Resources initiatives. · Support HR Team in meeting hiring targets. · Assist in end-to-end recruitment activities, including sourcing, screening, and scheduling interviews. · Provide assistance in conducting employment verification checks. · Coordinate and participate in new-hire orientation. · Gather data and create HR documents | Recruitment reports. · Assist and organize training and employee engagement activities. · Create, maintain, and organize employee records. · Create and post HR Communications; Shop and Office environments. · Maintain confidentiality of applicant and company information. · Perform other activities as required by the Human Resources Manager. Qualifications/Knowledge/Skills/Abilities: · >3.0 cumulative overall GPA or better (on a 4.0 scale). · Currently a full-time or part-time student pursuing a degree in Human Resources or a similar discipline at the undergraduate or graduate level. · Good understanding of full-cycle recruiting. · Experience creating documents with MS Office products, including Excel, Word, and Power-point · Energetic, enthusiastic self-starter; able to organize and pursue broad objectives under the guidance of a mentor. · Strong written and verbal communication skills. · Detail-oriented and highly organized. · Strong people skills and the ability to engage with all employees. · Ability to prioritize and juggle tasks to meet deadlines. · Demonstrates initiative, accountability, and willingness to learn in a fast-paced environment and maintains positive | professional working relationships with all employees, applicants, and HR team members. What You Will Gain · Paid Internship (29 hours per week) · Hands-on experience in various HR functions · Exposure to recruitment, employee relations, and HR operations · Opportunity to develop HR and communication skills · Experience working in a Union environment · Mentorship from experienced HR professionals Physical Abilities · Travel freely within manufacturing and office facilities. · Requires climbing stairs. · Physical ability to lift and carry up to 25 pounds unassisted. Pay: $22/hr - $25/hr Requirements:

Job Description Research and Development Technician Job Description Reports to: Product Engineering Manager Position Summary: This position is an integral part of our Engineering team. The Research and Development (R&D) Tech supports the research and development of engineering projects to ensure objectives are met. The R&D Tech performs a variety of duties that require accuracy, creativity and innovation. This role will also participate in areas of material control and flow including testing and inspection. Essential Duties and Responsibilities: · Assist in design and development projects for new products, product/process changes and improvements including related prototyping, testing and documentation. · Create and maintain accurate documentation of product assembly instructions, testing procedures, test reports, quality inspection reports, and shop equipment manuals. · Execute new product qualification testing and write test reports. · Coordinate with internal personnel to procure material and equipment for testing. · Contribute to the improvement of existing products and development of new products through brainstorming sessions with the engineering team. · Interact as needed with the manufacturing, purchasing and quality control departments. · Complete accurate and timely preventive maintenance of shop equipment and test fixtures. · Design, build and operate new test fixtures. · Assist warehouse with truck loading, stock replenishment, toilet assembly, shipping as needed. · Construct and finish prototype assemblies for evaluation and testing. · Operate and maintain our 3D printers for prototyping purposes. · Manage product documentation in the engineering department and in our enterprise resource planning software, execute engineering change orders and update product data. · Inspect existing products against detailed production drawings and write inspection reports. · Perform other duties as assigned. Education and Experience Requirements: · High School education required. · 3+ years of experience in a manufacturing industry, product development or product testing is preferred. · A strong desire to work in product development and engineering is necessary. · Familiar with basic drawing layout, dimensioning, and tolerancing. · Background knowledge in engineering or plastics manufacturing is preferred. · Drafting and modeling skills using Creo or Solidworks software is beneficial, but not necessary. · Some experience with plastic part design is beneficial. · Demonstrated experience using hand and power tools is necessary. · Demonstrated high attention to detail is necessary. · Experience using calipers, tape measure, and weighing scales is necessary. · Forklift experience is beneficial, but training will be provided. Required Skills: · Strong written and verbal communication skills. · Comfortable using Microsoft Word, PowerPoint and Excel. · Comfortable navigating computer files, email, ERP software (training will be provided). · Strong initiative to solve problems and recommend improvements, a self-starter. · Extremely reliable and high credibility. · Strong attention to detail and accuracy. · Ethical conduct. · Excellent problem solving and organizational skills. · Strong Interpersonal communication skills. · Demonstrated ability to work with a team. · Flexibility to jump between priorities as needed. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. Position requires a high degree of concentration to manage frequent interruptions while meeting strict deadlines. This position requires the ability to perform duties using both typical office equipment such as computers, cell phones, and printers as well as the ability to communicate and perform tasks in an office and research environment. The ability to lift files, open filing cabinets and bend, sit or stand is necessary. The ability to safely operate standard shop tools with minimal supervision is necessary. Lifting parts and materials up to 40 pounds by yourself is necessary. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position will be required to operate a forklift. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. Signature: Date:

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been simple: We Care. That commitment extends to our people, our customers, and the communities we serve—driving a culture of belonging across our industry. Limbach Facility Services LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB), is a leading building systems solutions firm delivering mission-critical systems that support life’s most important moments. We specialize in revitalizing and maintaining HVAC, mechanical, electrical, plumbing, and control systems within existing facilities—ensuring buildings are always ready to perform when it matters most. Learn more about Limbach by checking out our YouTube channel: We Are Limbach - YouTube From healthcare and education to government and commercial facilities, we partner with building owners and operators to safeguard reliability, efficiency, and comfort where it’s needed most. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. Learn more about Limbach’s commitment to our people and career opportunities, straight from our employees via the Limbach Unlocked podcast: Limbach Unlocked - Why We Chose Limbach We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • We Are Accountable The Benefits & Perks… • Base salary range of $130K - $170K, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE., • Career pathing flexibility and mobility. Who You Are… As Staff Attorney - Contracts, you will be responsible for providing day-to-day legal services to branch and corporate department clients, with a focus on reviewing and assessing risk in contracts for complex construction and building systems projects. This role plays a critical part in protecting the Company’s commercial interests while enabling Sales, Operations, and Project Teams to execute work efficiently and profitably within acceptable risk parameters. This person will work directly with the General Counsel and Senior Attorneys to provide legal advice and represent the Company and its interests in relevant matters. The incumbent has a preferred practice history in handling construction-related contracting matters, and providing related legal counseling and advice, as in-house counsel for a sophisticated building owner/builder, developer, construction manager, or general contractor. This individual brings a strong commercial mindset, sound business judgment, and a practical approach to balancing risk mitigation with deal enablement in a fast-paced, sales-driven environment. This Position… Some examples of the work you might do includes: • Provides support, guidance, and counsel to the General Counsel and other executives, Senior Attorneys, corporate department clients, and branch clients with respect to risk, risk avoidance and mitigation, legal rights, remedies, and obligations, new and existing laws, and the application thereof to the Company’s operations., • Partners closely with Operations, Project Management, Sales, Service, People & Culture, Finance, IT and Risk Management to review, redline, and negotiate customer contracts, subcontracts, vendor and supplier agreements, and other contracts, across multiple delivery models, including Design-Bid-Build, Design-Build, service, retrofit, and maintenance agreements, as well as other commercial agreements., • Serves as a trusted advisor to Operations and Sales by providing practical, risk-based contract guidance that supports business objectives., • Collaborates with leadership and others in Legal to align on acceptable risk thresholds and approval authority., • Provides contract-related guidance and education to Branch Managers and their sales and operations teams. Contract Review & Negotiation • Reviews and assesses risk in a wide variety of agreements, including prime contracts, MSAs, SOWs, GC and CM-at-Risk agreements, service agreements, and subcontractor and supplier contracts., • Coaches and supports branch and corporate department clients in negotiating contract terms., • Utilizes AI-enabled contract review tools, and partners with IT and Legal, to support continuous improvement of contracting technology and processes., • Conducts legal research and analysis pertaining to issues arising in contracting and other matters, as needed., • Coordinates with Risk Management to confirm compliance with contractual insurance requirements. Subcontractor, Vendor & Supplier Agreements • Reviews markups of subcontractor, vendor, and supplier agreements and supports branch clients’ downstream contracting requirements., • Reviews subcontractor, vendor, and supplier agreements to ensure alignment with prime contract obligations; ensures appropriate flow-down of contractual terms and risk allocation., • Partners with project teams to identify and mitigate supply chain, delivery, and commercial risks. Governance, Process & Continuous Improvement • Understands and applies Company contracting policies and procedures., • Assists in the development and refinement of contract playbooks, clause libraries, risk assessment tools, templates, approval workflows, and negotiation strategies., • Periodically, on an as-needed basis, supports the Company’s in-house attorneys in evaluating branch clients’ claims and financial pursuits, including disputed change orders, delay and impact claims, and other claims for additional compensation in accordance with Company policies, and supports branch clients' negotiations with customers related thereto., • Periodically, on an as-needed basis, supports the Company’s in-house attorneys in resolving issues, disputes, and claims arising out of the Company’s operations, including contract performance, claims, employment, and legal and regulatory compliance., • Periodically, on an as-needed basis, supports the Company’s Corporate Departments’ contracting needs., • Performs other duties as assigned by the Legal team. What You Need… • Licensed to practice law and in good standing with the state bar or other governmental entity that regulates the practice of law in at least one state where the Company maintains an active office., • At least five (5) years of practice in related fields., • Excellent time management skills and ability to work independently., • Exhibits professionalism and the ability to work collaboratively with others in the Legal, Risk Management and Compliance Department and the Company., • Has regular access to the Internet., • Ability to travel up 10% of the time. Preferred Qualifications: • Resides near one of the Company’s active office locations, with strong preference for residence near the Company’s office in Orlando, FL or Tampa, FL., • 10-15 years’ experience, with at least 5-7 years’ experience in reviewing, redlining, and negotiating contracts in construction, building systems, engineering, or industrial services, and providing related legal counseling and advice and/or at least 5-7 years’ experience as in-house counsel for a sophisticated building owner/builder, developer, construction manager, or general contractor., • Some exposure to transactional, public company, and/or employment legal issues. Conduct Standards: • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • Consistently exemplifies the Core Values of the Company (we CARE, we act with INTEGRITY, we are INNOVATIVE, and we are ACCOUNTABLE). Work Environment: • This position operates primarily in a remote home office environment, with occasional operation in a professional office environment, subject to the discretion of the General Counsel and compliance with the Company’s Work from Home Policy, which Policy may be modified from time to time, and routinely utilizes standard office equipment, such as computers, phones, and printers., • Work tasks may occasionally necessitate travel to local job sites, which means intermittent exposure to the conditions typically associated with a shop environment or construction site. Physical Demands: • In performing the duties of this job, the incumbent is regularly required to sit, stand, walk, talk, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer. #LFS

Job Description Job Title: Engineering Manager Job Description The Engineering Manager leads and develops a team of engineers in a manufacturing environment, ensuring that all engineering activities are executed safely, on schedule, within quality expectations, and in line with budget requirements. This role drives both short-term and long-term engineering strategies, supports production and operations, and champions continuous improvement across processes, products, and technologies. The Engineering Manager collaborates closely with cross-functional teams to support customer programs, new product launches, and the successful transfer of new products and processes into production. Responsibilities • Lead, mentor, and develop members of the engineering team, providing regular coaching, feedback, and professional development opportunities., • Assign work to engineering staff, monitor performance, and ensure accountability for meeting project objectives and deadlines., • Promote company values and a culture of safety, quality, and accountability throughout the engineering department., • Ensure all engineering activities are completed safely, on schedule, within defined quality standards, and according to budget requirements., • Develop and execute both short-term and long-term departmental strategies that align with overall organizational objectives., • Provide clear and timely project, schedule, compliance, and budget updates to leadership., • Partner closely with operations, production, and management teams to support manufacturing activities and resolve technical issues., • Evaluate manufacturing capabilities and resource requirements to improve production outcomes and overall efficiency., • Ensure operational teams have access to the technical expertise and engineering support necessary to achieve production goals., • Lead initiatives focused on manufacturing process improvements, including root cause analysis and corrective action implementation., • Assess customer designs and recommend improvements to enhance manufacturability, reduce costs, and increase production efficiency., • Apply Design for Manufacturability (DFM) principles when evaluating products, processes, and new designs., • Direct engineering efforts involving Bills of Material (BOMs), Bills of Operations (BOOs), value stream optimization, and profitability improvement., • Estimate engineering labor requirements and project costs to support quoting, budgeting, and project planning activities., • Collaborate with cross-functional teams to support customer programs and new product launches from concept through production., • Oversee the successful transfer of new products, technologies, and manufacturing processes into production operations, ensuring smooth ramp-up and stable performance. Essential Skills • 5+ years of experience leading engineers in a manufacturing setting., • Engineering management experience with responsibility for team leadership, performance management, and project delivery., • SolidWorks design knowledge, including experience with CAD and 3D solid modeling software (SolidWorks preferred)., • Knowledge of ISO standards and their application in engineering and manufacturing environments., • Experience with sheet metal design and fabrication, including familiarity with fabrication and machine shop practices., • Strong blueprint interpretation capabilities to support design review, manufacturing, and quality assurance., • Knowledge of manufacturing process development with a focus on employee safety and operational effectiveness., • Advanced analytical and troubleshooting abilities, including experience facilitating corrective actions and continuous improvement initiatives., • Experience evaluating and implementing modern engineering practices, technologies, and design methodologies., • Proficiency with Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook., • Excellent organizational skills with the ability to manage multiple priorities, projects, and deadlines., • Strong written and verbal communication skills for effective interaction with technical and non-technical stakeholders., • Effective interpersonal skills with the ability to build and maintain relationships across all organizational levels., • Ability to work both independently and collaboratively in a fast-paced manufacturing environment. Additional Skills & Qualifications • Experience directing engineering activities related to Bills of Material (BOMs) and Bills of Operations (BOOs)., • Experience in value stream optimization and profitability improvement initiatives., • Experience supporting customer programs and new product launches in a manufacturing setting., • Familiarity with Design for Manufacturability (DFM) principles and their application to product and process design., • Experience estimating engineering labor and project costs to support quoting and planning., • Demonstrated ability to lead root cause analysis and implement sustainable process improvements. Work Environment This role operates in a fast-paced manufacturing environment that involves close collaboration with operations, production, and cross-functional teams. The Engineering Manager works with CAD and 3D modeling tools such as SolidWorks, as well as standard office software including Microsoft Word, Excel, PowerPoint, and Outlook. The position requires regular interaction with fabrication and machine shop operations, sheet metal processes, and production lines. Work typically involves a combination of office-based engineering activities and on-floor support for manufacturing processes, with a strong emphasis on safety, quality, and operational effectiveness. Job Type & Location This is a Permanent position based out of Bloomington, MN. Pay and Benefits The pay range for this position is $120000.00 - $150000.00/yr. Medical Insurance- (United Healthcare) NICE Healthcare Employee Assistance Plan (EAP) HSA - Health Savings Account - (Optum Bank) Dental Insurance - (Delta Dental) Voluntary Vision Insurance - (EyeMed) Life Insurance and Accidental Death & Dismemberment Voluntary Life Insurance & Accidental Death & Dismemberment Short-Term Disability Insurance Long-Term Disability Insurance Voluntary Accident Insurance Voluntary Critical Illness Insurance Profit Sharing 401(k) Holiday Pay PTO (Paid Time Off) Wearables Program Workplace Type This is a fully onsite position in Bloomington,MN. Application Deadline This position is anticipated to close on Aug 3, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job description Lawn Ranger is a long established in the metro area specializing in commercial lawn care and landscaping dating back to the 1980’s. We are currently seeking a highly experienced field-working manager for our fertilizer/pesticide program. In this role you will be responsible for managing our fertilizer/pesticide program and applying products on our customers’ properties as well as assisting with winter operations as an optional year long position. Qualifications • Valid driver's license with a clean record, • Valid applicator license or ability to study for and pass the test before spring, • Must have, or be willing to obtain, Federal DOT Medical card, • Minnesota Department of Agriculture Fertilizer Applicator License, • Customer service with a horticulture background, • Must have a thorough knowledge of different fertilizers, fungicides, and herbicides, • Knowledge of calibration and mixing of products, • Able to read and understand English, Spanish speaking a plus, • Must be able to work independently and efficiently and comply with all federal, state, local, and company regulations regarding the application of pesticides and fertilizer, • Be organized and familiar with computers Responsibilities • Manage our fertilizer/pesticide program including scheduling jobs and product inventory, • Load lawn care products and tools into truck daily, • Complete daily tasks independently and efficiently, • Assist in other roles when necessary, including snow removal, landscaping, lawn mowing, grounds care, and shop organization Physical Requirements • Ability to lift 50+lbs repeatedly and walk several miles each day, • Experience operating fertilizing equipment such as a Z-spray or Toro Spray Master, • Safely handle walking on uneven ground and hillsides Perks! • Outdoor work, • Company match incentive plans, • Company party and boat trips

Location: Duluth, MN Compensation: $85,000 – $100,000 / year (Dependent on Experience) Schedule: Full-Time | Monday–Friday | In-Person | Relocation Assistance Available About the Opportunity Are you a seasoned diesel mechanic ready to step into a leadership role—without leaving the shop floor behind? Avenica has partnered with our customer—a locally owned, family-oriented hauling company serving the greater Duluth, MN area since 1952—to hire a Shop Manager / Tech Lead to oversee their growing fleet of 30+ trucks. This is not a standard wrench-turning position. It’s a hands-on leadership role for an experienced diesel professional who can split their time between mentoring a growing team and diving into complex diagnostics and repairs. Our client will set you up for long-term success with a clear path into broader operations leadership. Why Join Our Client? • Competitive salary of $85,000–$100,000 per year based on experience., • Relocation assistance available for the right candidate., • Full benefits package: Health, Dental & Vision Insurance, HSA, and Life Insurance., • 401(k) with company matching and retirement plan., • Paid Time Off (PTO) and employee discounts., • Work with a stable, established company backed by over 70 years of community trust., • Be a key player in a growing operation—your voice will shape how the shop runs., • Clear path into broader management and operations leadership as the team expands. Key Responsibilities • Manage daily maintenance and service needs for a fleet of 30+ trash and recycling trucks., • Inspect, diagnose, and repair electrical, hydraulic, suspension, brake, and air systems across vehicles and equipment., • Review driver-reported issues and determine whether to handle repairs in-house or outsource., • Oversee and perform quick fixes as well as long-term mechanical solutions., • Schedule repairs, maintenance timelines, and daily shop production., • Inspect quality of outside/supplier repairs and rebuilds; assess structural damage and assign appropriate repair methods., • Perform and oversee installation of camera systems, automated arm systems, and electrical components., • Brief and lead technicians on daily service plans; provide hands-on training and mentorship., • Collaborate with the in-house fabrication team on custom fixes and system builds., • Conduct vehicle safety checks—employee and community safety is the team’s top priority., • Purchase parts, equipment, and accessories; maintain in-house inventory and record keeping., • Manage clerical maintenance records electronically and in hard copy., • Maintain a clean, safe shop in compliance with Corporate/OSHA standards., • Foster communication between shop staff and corporate leadership as the company grows. What You Bring • 10+ years of experience in a diesel mechanic shop (diesel experience required)., • Proven experience managing or leading a technical team (strongly preferred)., • Strong electrical diagnostic and wiring skills: camera systems, wiring harnesses, sensors, and more., • Advanced proficiency across key vehicle systems: chassis, refuse bodies, hydraulics, air brakes, engines, drivetrain, suspension, and HVAC., • Ability to troubleshoot and resolve both routine and complex mechanical issues., • Comfort working alongside a fabrication team and interpreting driver feedback accurately., • Self-starter who can manage shifting priorities between hands-on work and team oversight., • Proficiency with Microsoft Office Suite and desktop computer use for record keeping., • Strong communication skills for coordinating across shop staff, drivers, and leadership., • Valid driver’s license required., • High School Diploma, GED, or equivalent. Equal Employment Opportunity Avenica is an Equal Opportunity Employer. We are committed to creating an inclusive and diverse workplace where all individuals are respected and valued. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other protected characteristic. We believe that diversity of backgrounds, perspectives, and experiences strengthens our team and drives innovation. We welcome applicants from all walks of life and encourage individuals from underrepresented groups to apply.

Overview:\n TGK Automotive Specialists – We have been serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction. We have immediate openings for Auto Repair Techs. If you’re a motivated technician, you’ll have the ability to handle multiple repairs throughout the day with a seasoned staff, we are looking for you. Auto Techs are essential in our shops to ensure that scheduled maintenance and repairs are provided with the highest quality standards in the clients expected timeframe. The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards. COMPENSATION: $65,000/Yr. - $90,000/Yr. VARIES DEPENDING ON EXPERIENCE & QUALIFICATIONS Benefits: • Competitive Bi-Weekly Pay, • Tuition Reimbursement, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy, • Performs complex and heavy-duty repairs, • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers, • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file, • Follows all safety procedures and reports any concerns to direct supervisor, • Adheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee Handbook, • Ability to work flexible schedules, Monday - Friday Qualifications: • Previous automotive technician / mechanic experience required, • ASE certifications in lieu of experience, • Ability to demonstrate proper use of computerized equipment for diagnostics, • Valid Driver’s license, • Must be at least 18 years old, • High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands: The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: • Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building, • Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently, • Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently., • Communicate with customers and shop personnel, • Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

Job Description Do you consider yourself the best service advisor around or is there a reason you know you would be the best service advisor if we gave you the opportunity? Currently we are only looking for the best service advisors. Turbo Tim's Top Reasons to work here We have cats at all shops. No weekends! Shop can be used for personal work. We get lunch on Fridays quite frequently and have snacks and drinks (la croix and Red Bull) for employees. Air Conditioned shops! Paid Training Opportunities We do a ton of community events ranging from locally World Famous Crush-a-Whirl to hosting comedy shows. Opportunities for growth. We are a growing business and like promote from within. ASE Reimbursement We prioritize work/life balance and have flexible hours. Turbo Tim’s mission is to offer exceptional service in order to help our customers feel safe on the road and comfortable in our shop. We strive to fulfill this mission, daily, through compassionate listening, attention to detail, and excellent communication for both our customers and internally among team members. Our Core Values Community We work together to solve complex problems, offering to help whenever possible. We’re focused on making the community better for everyone. We see our work as an opportunity for service advisors, technicians and customers to come together and mutually agree on the best decisions given the circumstances. Care We treat all humans, animals, and machines in our community with respect. We treat ourselves with care, maintaining that safety, physical and mental health, and basic needs are the highest priority. We support our communities to be safe, healthy, and thrive. Trust We trust our customers and their experiences with their cars. We earn trust from our community by listening compassionately and letting them know we’ve heard their concerns and are here to help them. We are trustworthy in our words and actions, leading to good relationships between our team members and with our customers and community We build trust with our community by providing a comfortable shop experience both in the shop and out on the road with our exceptional warranty. Innovation We strive to grow both personally and professionally to serve our communities to the best of our abilities with the newest technologies and ideas. Whenever possible we support each other to innovate from the smallest workplace changes to larger industry shifts. We recognize and stand behind the values-based & sustainable growth of our work. Fun We have fun together, laughing, smiling, joking around is important to the work we do, internally and externally, with our customers and community. Responsibilities: Create repair orders when checking in customers, record all needed information, and explain the proper Inspection or Maintenance work. Keep Customers updated on the progress of their vehicle while it goes through the various stages of repair. Write estimates including labor and parts. Send inspection reports of any discovered services to customers, and go over those inspections to ensure the customer concerns are answered. Send estimates to the customer and go over the pricing and what each job entails. Answer incoming calls. Answer incoming text messages. Check CRM for appointments and follow up messages. Maintain set sales goals related to overall sales and profit. Maintain a clean and organized front counter area. Maintain a clean and organized parking lot. Assist Service Manager as necessary. Attend training as directed and required Attend and participate in networking and company events Follow all company policies and procedures as outlined in handbook Requirements: Possess a valid driver’s license issued in Minnesota. Capable of achieving and maintaining the Service Advisor ASE certification Able to work with minimal supervision. Highly organized. Possess good verbal and written communication skills. Must be mature, flexible, and self-motivated Able to operate all company equipment needed to perform required tasks. Can carry up to 50 lbs. Working knowledge of Windows, Excel, Word, CRM tools, Google programs, and a multi-line phone system. Preferred Qualifications: Years of related experience 0-3 Associates degree or higher Compensation Range: $60,000-$140,000

Job DescriptionService Writer Department: Service Reports To: Service Manager Overview The Service Writer - Second Shift is responsible for supporting the daily operations of the service department by accurately documenting customer concerns, creating repair orders, and coordinating communication between customers, technicians, and service leadership. This role plays a key part in ensuring an efficient workflow, clear documentation, and a positive service experience. By maintaining accuracy, organization, and consistent communication, the Service Writer helps keep vehicles moving through the shop efficiently while supporting customer satisfaction and service department productivity. Benefits Health Insurance 401(k) Retirement Plan Paid Time Off (PTO) Competitive Wages Flexible Scheduling Key Responsibilities Greet customers and assist with vehicle check-in by collecting accurate information regarding service needs and concerns. Create, update, and manage repair orders with clear documentation of customer requests, labor operations, and vehicle details. Schedule service appointments and coordinate workflow with technicians and service leadership. Communicate repair status updates to customers in a timely and professional manner. Ensure repair orders are completed accurately, including labor entries, parts usage, and technician notes. Support technicians by relaying customer concerns clearly and assisting with parts or information requests as needed. Maintain organized records and ensure compliance with dealership and manufacturer processes. Assist with service department administrative tasks to support efficiency and on-time vehicle delivery. Promote a positive and professional customer experience through clear communication and attention to detail. General Knowledge and Skills You Will Need Strong organizational and documentation skills with attention to accuracy and detail. Ability to communicate clearly and professionally with customers, technicians, and leadership. Basic understanding of automotive or diesel service operations preferred. Ability to multitask, prioritize work, and manage time effectively in a fast-paced environment. Customer-focused mindset with a commitment to providing helpful and timely service. Team-oriented approach with the ability to collaborate across departments. Desired Education and Experience High school diploma or equivalent Previous experience in a service department, customer service, or administrative role preferred This job description is not intended to be an exhaustive list of all duties, responsibilities, or requirements. The dealership reserves the right to modify or assign additional responsibilities as business needs change. We are an Equal Opportunity Employer.

Job DescriptionJob Title: Automobile Service Writer/Manager.Location: Shoreview Amoco. Job Type: Full-Time. Position Overview: We are seeking a knowledgeable and customer-focused Automobile Service Writer/Manager to oversee daily operations of our service department. This role combines strong customer service skills with technical understanding of automotive repair and maintenance. The Service Writer/Manager will act as the liaison between customers and technicians, ensuring a smooth workflow, accurate repair documentation, and a high level of customer satisfaction. Key Responsibilities: • Greet customers, listen to their concerns, and accurately document vehicle issues., • Create, explain, and manage repair orders with clarity and professionalism., • Provide cost estimates, timelines, and obtain customer approval for services., • Assign and schedule work to technicians based on skill, availability, and priority., • Monitor repair progress and communicate updates to customers., • Ensure all services are completed accurately, on time, and within budget., • Handle warranty claims, insurance paperwork, and parts ordering as needed., • Maintain a clean, safe, and organized service area., • Train, supervise, and support service staff to meet performance goals., • Promote additional services, preventive maintenance, and dealership/ shop specials., • Resolve customer complaints with professionalism and efficiency., • Track department performance metrics, including sales, productivity, and customer satisfaction. Qualifications: • High school diploma or equivalent (Associate’s or Bachelor’s degree a plus)., • 3+ years of experience as a Service Writer, Advisor, or Automotive Service Manager., • Strong understanding of automotive systems, diagnostics, and repair processes., • Excellent communication and interpersonal skills., • Proven ability to manage staff and delegate effectively., • Proficiency with automotive software (e.g., Reynolds & Reynolds, CDK, Mitchell, etc.) and MS Office., • Strong organizational and problem-solving skills., • Valid driver's license and clean driving record. Preferred Skills: • ASE certification or equivalent industry certifications., • Previous management or supervisory experience., • Sales and customer service background. Compensation & Benefits: • Competitive base salary plus performance-based incentives., • Health, dental Insurance., • Paid time off and holidays., • 401(k) retirement plan., • Employee discounts on parts and services.

Job DescriptionSalary: $80,000-$120,000 Annually Full Time Service Advisor This is a service advisor position with potential to become a store manager for the right person. You can expect: • Be treated with respect: When you join our team you will benefit from having a fun place to work and you will be treated with respect as an individual (not just a number). • We work as a team: A big part of our culture is taking care of eachother. Everyone on our team cares for eachother and wants to do a good job. We take pride in our team work. • Great Benefit Package: You will enjoy our benefit package that includes Health & Dental Insurance, 401k matching, Paid time off, Paid Holidays, Paid Uniforms, and More. ...AND A GREAT PAY PLAN! • Growth Potential: We invest in our people through training, coaching, and good leadership. You will enjoy the benefits of working at a growing company owning 4 well equipped shops (2 in St. Paul, 1 in West St. Paul, & 1 in Eden Prairie). We have plans to continue growing. Very well established business- known in the neighborhood as high quality automotive repair shop with amazing customer service, and great track record of success. NO WEEKENDS We are open Monday through Friday, and we make sure youre home for dinner! *Position requirements: • Takes pride in helping people (customers and co-workers), • Minimum 5 years Service Advisor / Service Writer experience, • Professional and organized, • Pays attention to details, • Motivated to succeed and excel personally (and in business), • Effective communication skills with customers and technicians, • Ability to maintain high level of sales and GP, • Is coachable

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance Take your career to the next level. At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive service advisors to manage and direct all service department activities of a retail store engaged in selling tires and related automotive parts and mechanical services. This position is a Store Manager developmental role. Midas is committed to training our associates and promoting from within the organization. Responsibilities As a Midas automotive service advisor, you will manage and direct all automotive and general service technicians in the operation of the shop, including: • Deliver exceptional customer service while listening and consulting customers, • Following up with customers, services requested, estimated completion times etc., • Oversee complete vehicle inspections and then make comprehensive recommendationsbuilding computerized repair orders and sourcing parts, • Deliver and discuss pricing estimates with customers as well as promoting shop service specials, • Lead, manage, and train team while keeping in tune with our companies vision, purpose, core values, and employee creed, • Supervise up to ten employees, • Oversee technicians inspections, diagnosing and repairing of domestic, European and Asian cars and light trucks, • Maintain inventory counts, • Overall cleanliness and organization of the facility, • Other duties as assignedQualifications, • A minimum of 2 years of store or service advisor or manager experience, • Digital vehicle inspection knowledge, • General automotive knowledge, • Excellent customer service disposition, • Good communication skills, • Leadership ability, • Team building skills, • Ability to work a flexible retail schedule., • Valid drivers license