Trabajos osha en Amarillo, TexasCrear alertas

Job Description We are a rock crushing company that was established in 2018 and are currently seeking Loader operators/laborers. Job candidates must be willing to travel. LOADER OPERATOR: Responsibilities of Loader Operator include, but not limited to: • Feeding hopper via loader with materials to be processed thru crushers and onto conveyors which then carry to end-product pile location., • Ability to oversee and recognize crusher operations variances which occur throughout the shift. General maintenance of greasing equipment. One year experience running loader is required., • Starting wage is dependent upon experience., • Occasional maintainance of pit grounds by monitoring and removing material debris surrounding conveyors via manual shoveling and use of Skidsteer; Ensuring material flows are running smooth; We will train. Ability to oversee and recognize operations variances which occur throughout the shift; General maintenance of equipment, greasing equipment, and repairs as instructed; We will train., • Starting wage is $23/hr and is negotiable based on experience. Pay increases based upon performance. We are looking for persons that must have strong work ethic and display great attitude and. MSHA and OSHA guideline requirements are followed regarding Safety and excellent housekeeping aptitude. Must be able to work with a team and be flexible to work night shift when needed. Typical shift 10-12 hours per day./ 6 days per week. Each position requires own transportation to and from the jobsite. Travel is required to job locations as we are a portable rock crushing operation that moves throughout Texas over the course of a year. Lodging is provided. Food and fuel expenses are not covered by Company. Company DescriptionWe are a portable rock crushing company established in 2018. Our work is to modify raw rock or recycle asphalt materials to a product used for construction of highways, platforms, etc.We are a portable rock crushing company established in 2018. Our work is to modify raw rock or recycle asphalt materials to a product used for construction of highways, platforms, etc.

Job Description HVAC Journeyman – Lead Commercial and Industrial Sheet Metal and Duct Installations Job Overview • Company: Howards Mechanical Inc., • Salary/Pay Rate: $35 to $40 per hour (Based on experience) plus Performance Based Bonus., • Location: Amarillo, TX (10% Travel Required)., • Job/Employment Type: Full Time., • Project Scope: Commercial, Industrial, Government, and Federal., • Mandatory Licenses & Certifications: None Required. The Opportunity You will serve as a critical technical expert, driving the successful execution of large-scale commercial, industrial, and federal HVAC installations. This role allows you to showcase your advanced sheet metal and ductwork skills while executing high-quality builds for a family-owned company that truly values your long-term career growth. You will enjoy the autonomy of managing field operations on site, backed by a dedicated leadership team. How You Will Make an Impact • Execute complex commercial sheet metal fabrication and ductwork installations in strict accordance with blueprints and technical specifications., • Manage daily field operations to ensure HVAC mechanical projects are delivered safely and on schedule., • Coordinate with project managers and site superintendents to maintain strict project timelines and material efficiency., • Maintain accurate daily documentation regarding project progress and quality control standards., • Resolve real-time technical challenges and air distribution issues on site to maximize HVAC system performance., • Mentor and guide junior apprentices in the field to foster a culture of professional growth and safety. Required Qualifications & Experience • Proven experience as a sheet metal journeyman or duct installer executing complex commercial or industrial HVAC work., • Proficiency in reading and interpreting detailed mechanical drawings, architectural layouts, and duct specifications., • Willingness to travel up to 10% for specific project assignments as required by the business., • Strong communication and organizational skills necessary for managing field installations and team dynamics., • Advanced capability to work independently with minimal oversight while meeting tight installation schedules. Preferred Qualifications & Experience • Minimum of 5 years of related work experience in the mechanical and HVAC trade., • Demonstrated experience in mentorship or training junior team members in a field environment., • Advanced knowledge of industrial ventilation systems and specialized federal or government installations. Compensation & Benefits • Weekly pay cycle and performance-based bonuses available., • Competitive 401(k) retirement savings program with employer matching., • Comprehensive medical, dental, and vision insurance packages., • Life and disability insurance options with safety equipment provided., • Generous paid time off including holidays, vacation, and sick leave., • Travel projects provided with per diem, a company vehicle, and a fuel card., • Paid training programs, manufacturer training, and OSHA certifications., • Technology package including a company-provided smartphone or tablet., • Access to annual company trips, outings, and yearly family parties. About Us Howards Mechanical Inc. is a trusted name in commercial and industrial mechanical installations, operating as a family-owned and operated business. We foster a supportive environment where long-term employees thrive through dedicated mentorship and ongoing professional development. Learn more at howardsmechanical.com. Howards Mechanical Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Job Title: Traveling HVAC Service Technician Job Location: Amarillo TX FLSA Status: Non-Exempt Pay Range: $30-60/hour Ready to take your HVAC career nationwide? Join a powerhouse team building and servicing mission-critical data centers for the biggest names in tech — with top pay, travel stipends, premium benefits, and a potential sign-on bonus based on your experience. If you’ve got the expertise, we’ve got the opportunity. Overview: Based in Amarillo TX, you’ll join Air National Services — part of the AIR family of operating companies as an Experienced Commercial HVAC Service Technician. You’ll travel to high-profile data centers across the country, providing startup, commissioning, and service support for advanced HVAC systems that power today’s digital infrastructure. When you’re home, you’ll partner with one of our local operating companies to support regional commercial clients across that region. Join a company that values your expertise, precision, and pride in doing the job right. Check out our website here: AIR Control Concepts | HVAC Partnerships, Growth & Support Across North America Essential Duties and Responsibilities: To succeed in this role, you will need your own vehicle. Air National Service team will not be providing a work vehicle. Service Technicians must demonstrate startup, commissioning, and diagnostic troubleshooting experience. Core Responsibilities Include: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where needed. Additional Role Highlights: • Travel will be required nationwide. When not on the road, technicians will work with the local operating company in their region., • A partial tool set is provided by the company., • All required PPE is supplied by the Air National Services team, • Technicians receive a company-issued corporate credit card for job-related expenses., • Extensive on-the-job training is provided at no cost, with opportunities to expand skills and grow over time. Competencies: • Technical Expertise & Problem Solving – Applies in-depth knowledge of commercial HVAC systems, tools, and technologies to troubleshoot issues and implement effective solutions. Maintains strong attention to detail and follows through on complex service tasks., • Customer & Team Engagement – Builds trust and maintains positive relationships with customers through clear, professional communication and consistent service. Collaborates well with peers, dispatch, and management to support team goals., • Time & Task Management – Prioritizes responsibilities effectively, manages schedules, and maximizes productivity across varying service calls and work environments., • Adaptability & Continuous Learning – Responds well to changing job demands and field conditions. Actively participates in training and embraces new tools, technologies, and methods to stay current in the trade. Experience & Requirements: • 7+ years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • EPA Universal Certification required; OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record; able to pass a background check and drug screening., • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Physical Demands / Work Environment: • This role is primarily field-based and physically active. HVAC Service Technicians can expect to spend the majority of their time on their feet, walking, standing, climbing ladders, bending, crouching, or working in tight and confined spaces. Extended periods of physical activity are common while diagnosing and repairing equipment at customer job sites., • While a small portion of time (approximately 15%) may be spent in an office setting completing reports or administrative tasks at a computer, most responsibilities require hands-on work with tools and equipment. Technicians must regularly lift and move items up to 50 pounds and occasionally up to 100 pounds, sometimes in challenging environments., • Clear and effective communication with customers, coworkers, and supervisors is essential, both in person and electronically. Individuals must also be capable of reviewing their work for accuracy and making necessary adjustments in the field., • This position involves frequent exposure to outdoor conditions and varying environments, including mechanical rooms, rooftops, and active construction sites. Noise levels may range from low to high depending on the job location. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education., • Company Perks – Vehicle allowance and company computer The Company provides equal employment opportunity in accordance with applicable laws and prohibits discrimination and harassment. Employment decisions are based on business needs and qualifications. The Company complies with disability laws and provides reasonable accommodations to qualified individuals. Powered by JazzHR vjD7JeTbCy

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Critical Systems HVAC Field Technician Location: Lubbock, TX Reports to: Service Director/Area Service Manager FLSA Status: Non-Exempt The Opportunity We are seeking experienced HVAC Field Technicians with the ability to travel to the customer site to start up, commission, troubleshoot and repair the equipment we represent. This position requires the capability to work independently, and candidates should have strong diagnostic skills. Requires the ability to manage projects for start-up commissioning and coordination of personnel and services. This is a full-time opportunity for an energetic self-starter. An ideal candidate will be customer service oriented and work well with others. The position requires a high level of correspondence with Project Managers, Field Supervisors, Service Coordinators and customers. This position of Field Technician for our Lubbock Service Team is focused on support our equipment sales to data centers. Fundamental Functions & Responsibilities: • Manage projects and processes while working independently and with limited supervision, • Coaches and reviews the work of lower-level professionals, • Face difficult and sometimes complex opportunities; takes a perspective to provide solutions, • Start-up, commission, and support BMS on equipment we represent, • Perform factory start-up, commissioning, warranty service on Data Center equipment and systems we represent., • Performs electrical and mechanical inspections on equipment to ensure peak performance, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Data Mission Critical Administrator in a timely manner, • Must work in a safe manner daily and ensure that all safety measures are always taken, • Performs other duties as assigned, • Flexibility to work overtime/ weekends, as required, • Perform PM tasks of the dedicated equipment on site Knowledge & Skills: • Ability to apply knowledge of refrigeration, air flow, and theory., • Excellent communication skills and interpersonal skills to interact effectively with diverse client groups., • Driven with the ability to work both independently and within a team., • Effectively communicate and properly describe problems and solutions., • Demonstrated technical skills to explain product functionality to customers., • Well-developed planning, organization, analytical, and decision-making skills., • Proficient computer skills, such as Excel and PowerPoint., • Ability to produce clear, timely and concise documentation and have well-developed problem-solving skills. Physical Requirements / Work Environment • Ability to travel substantially within operational region., • A flexible schedule may be required., • Willingness to work in adverse working conditions The Required Profile • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training plus 5+ years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification, Preferred (i.e. HVAC Journeyman, Master license), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds, • Ability to work independently with minimal supervision and balance requirements of multiple and varied duties Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, report to and from the same site daily Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description About Roberts Ditching Since 2007, Roberts Ditching has provided professional and reliable underground utility and excavation services across West Texas. We proudly serve electric utility companies, municipalities, renewable energy companies, telecom companies, and residential/commercial developments. Our experienced and fully insured team is committed to delivering safe, high-quality, and efficient solutions that keep critical infrastructure running. Our mission is to maintain the highest levels of professionalism, honesty, integrity, and fairness with our customers by gaining their trust and exceeding expectations through exceptional performance from every employee. Role Summary Roberts Ditching is seeking an experienced Boring Machine Operator (Directional Drill Operator) to support underground utility installation projects across West Texas. This role is responsible for operating horizontal directional drilling (HDD) equipment to install conduit, fiber, and other utilities safely and efficiently. Key Responsibilities Operate horizontal directional drilling (HDD) equipment safely and efficiently Perform bore setup, drilling, and pullback operations Read and interpret bore plans, utility maps, and locate markings Utilize locating systems to track drill head and maintain accuracy Identify and avoid existing underground utilities Perform routine maintenance and inspections on equipment Troubleshoot drilling challenges in varying soil conditions Collaborate with crew members, locators, and supervisors Follow all company safety policies and procedures Qualifications 2+ years of experience operating directional drilling/boring equipment Experience with drill rigs such as Vermeer, Ditch Witch, or similar Familiarity with locating systems (Digitrak, Subsite, etc.) Ability to read bore plans and understand underground utility layouts Willingness to travel regularly within West Texas Ability to work outdoors in all weather conditions Preferred Qualifications CDL (Class A or B) Experience operating additional equipment (excavators, backhoes, skid steers) Experience in telecom, fiber, or power distribution projects OSHA certifications or safety training

Job DescriptionSalary: $18-$22 Discovery Center Collective: Don Harrington Discovery Center & Wildcat Bluff Discovery Center Job Title: Maintenance Specialist (Part-time, Non-exempt) Reports to: Experience Operations Manager POSITION OVERVIEW The Facilities Maintenance Specialist works individually and with other staff members to support in the diagnosis, repair, and maintenance of the museum's inner workings. The Facility Maintenance Specialist ensures the safety and functionality of all machinery, as well as prepares the facility to welcome the public. In particular, the Facilities Maintenance Specialist is responsible for reporting facility issues and keeping the buildings and premises clean, safe, healthful, and in top physical condition. The Facilities Maintenance Specialists demonstrates flexibility, effectiveness, and a positive attitude, actively engages in communication with all other staff members and stays up to date on all necessary inspections. ESSENTIAL DUTIES AND RESPONSIBILITIES Facilities • Maintain building systems including HVAC, electrical, lighting, plumbing, mechanical systems, etc., • Coordinate with Operations Manager to schedule building inspections and maintenance to comply with local, state, and federal codes related to boilers, elevators, fire alarm system, fire extinguishers, and other areas. Work with Operations Manager to schedule inspections with fire marshal, insurance inspector, elevator inspector, and other local authorities as needed., • Clean and maintain grounds including sprinkler system, lawn, landscaping, building exterior, vehicles, debris removal, etc., • Work with Operations Manager with vendors and other service providers as directed, soliciting, reviewing, and negotiating contracts and bids to get great service at a fair price., • Maintain housekeeping equipment such as vacuums and carpet extractor. Exhibit & Program Support • Collaborate with Exhibits Department for fabrication, installs, technological repairs, and exhibit floor readiness., • Partner with the Education and Exhibits team to ensure operational needs are met for camps, field trips, and special programs., • Perform exhibit repairs and maintenance., • Assist with exhibit install. Administration • Work with Operations Manager to develop and maintain a schedule and procedures manual for building maintenance, including steps for preventive maintenance., • Work with Operations Manager and various departments to maintain records for MSDS/OSHA standards., • Work with CEO and other departments as needed to identify organizational priorities with a goal of excellence in visitor experience, safety, and functionality across all facilities and grounds., • Other duties as assigned. QUALIFICATIONS • Experience in several of the following trades: carpentry, electrical, plumbing, HVAC, lawn care, irrigation, construction, etc., • High school diploma, • Experience operating forklift and scissor lift, • Ability to regularly lift 50 pounds, • Valid Texas drivers license, • Goal oriented, • Proficient with Google docs, spreadsheets, etc.

Job Description SUMMARY: As an Environmental Health and Safety Manager, your contribution will be instrumental in the success of the Amarillo Facility, ensuring adherence to regulatory standards, proactively preventing accidents, and overseeing post-injury management. You will be tasked with developing and implementing tailored Environmental Health and Safety plans that align with the overarching Environmental Health and Safety objectives. As a seasoned Environmental Health and Safety Manager, your expertise will be pivotal in fostering a collaborative, proactive, and inventive approach to problem-solving, leading to the enhancement of our overall strategy and Environmental Health and Safety management system. DUTIES AND RESPONSIBILITIES: • Promote a culture of continuous improvement that exceeds division expectations., • Evaluate business unit capabilities, skills, and resource alignment to ensure performance against objectives, leading realignment efforts as needed for execution excellence, • Develops, implements, and monitors safety programs to reduce frequency of accidents and injuries; assists in minimizing overall workers’ compensation costs., • Plans, implements, communicates, and monitors safety policies and procedures in compliance with local, state, and federal OSHA rules and regulations., • Audits various safety program elements of effectiveness; schedules and performs safety inspections; identifies issues and develops corrective action plans., • Supervises, controls, and monitors fire prevention and firefighting activities., • Investigates all accidents and injuries; recommends and/or coordinates corrective actions., • Develops and implements safety training programs designed to instruct employees in general safe work practices plus specific instruction with regard to hazards unique to any job assignment; provides training for new employees., • Maintains thorough knowledge of federal and state OSHA regulations and web sites; maintains up-to-date knowledge of safety codes and regulations; distributes and/or posts new or revised safety standards that affect the company., • Reviews and responds to OSHA inquiries., • Identifies potential safety hazards at all facilities; reports hazards and recommendations for eliminating/reducing to management., • Coordinates with other departments on design and construction of new equipment, facilities, and work methods to ensure compliance with safety policies and regulations., • Encourages employees and supervisors to report all unsafe conditions immediately and schedules or coordinates repairs as soon as possible., • Encourages employees and supervisors to report any injury that occurs on the job, even a slight cut or strain, immediately., • Maintains records for statistical measurement and conformance to standard practices of the safety industry., • Prepares and maintains required safety reports., • Performs other related duties as assigned by management. QUALIFICATIONS: • Minimum of three to six years related experience; bachelor’s degree (B.A./B.S.) preferred., • Knowledge of OSHA regulations and compliance standards., • Commitment to excellence and high standards, • Excellent written and oral communication skills, • Ability to work with all levels of management, • Proven leadership and business acumen skills, • Strong interpersonal skills., • Ability to deal effectively with a diversity of individuals at all organizational levels., • Strong organizational, problem-solving, and analytical skills, • Proficient on [INSERT COMPUTER PROGRAM(S) REQUIRED FOR POSITION], • Ability to manage priorities and workflow, • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm, • Good judgement with the ability to make timely and sound decisions, • Ability to understand any and all safety requirements and cautions, • Ability to effectively present information and respond to questions., • Demonstrated competence in reacting to and handling emergencies., • Must be able to speak, read, write, and understand the primary language(s) used in the workplace., • Bilingual skills a plus.

Job DescriptionDescription:HSSE Coordinator Location: Amarillo, TX Reports To: HSSE Manager / Project Director Role Summary The HSSE Coordinator will implement and monitor Health, Safety, Security, and Environmental programs across projects. This role ensures compliance with corporate HSSE standards, local regulations, and client requirements, while fostering a strong safety culture and environmental stewardship throughout the project lifecycle. Key Responsibilities • Deploy HSSE programs and procedures across all sub-projects., • Align site-specific HSSE plans with mega project objectives and regulatory requirements., • Conduct regular audits and inspections to verify adherence to HSSE standards., • Track performance metrics and report compliance status to leadership., • Perform hazard identification and risk assessments for each project site., • Recommend and implement controls to reduce risks to ALARP (As Low As Reasonably Practicable)., • Investigate incidents and near misses, prepare reports, and ensure corrective actions., • Maintain accurate HSSE documentation and reporting systems., • Organize HSSE training sessions and toolbox talks for all project teams., • Promote behavioral-based safety and continuous improvement initiatives., • Coordinate emergency response drills and ensure readiness of equipment., • Support contingency planning for all project sites., • Monitor environmental compliance and waste management practices., • Implement sustainability measures across the mega project.Required Qualifications, • Bachelor’s degree in Occupational Health & Safety, Environmental Science, or Engineering., • 3–5 years of HSSE coordination experience, preferably in large-scale or multi-site projects., • Strong knowledge of HSSE regulations and risk assessment methodologies.Preferred Attributes, • Certifications such as NEBOSH, IOSH, or OSHA 30-hour are a plus., • Ability to manage multiple priorities across complex project environments., • Excellent communication and leadership skills for cross-functional coordination.Requirements:

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The HSE Specialist I is an entry-level professional safety position. It is a field-based position and supports the implementation of health, safety, and environmental (HSE) programs by collaborating with internal teams, regulatory bodies, and customer representatives. Assists in site inspections, hazard identification, incident investigations, training, and compliance documentation to promote a safe work environment. Contributes to planning, audits, and safety initiatives to align with company and regulatory standards. WHAT YOU'LL DO: Collaborate with internal teams, client representatives, regulatory agencies, and medical facilities to maintain effective working relationships. Support and promote the company's safety program and local incident prevention initiatives to reduce risk behaviors. Assist in implementing project based-safety programs aligned with strategic goals. Contributes to pre-task planning and job site safety meetings. Help prepare and deliver safety meetings and training to enhance hazard awareness. Contribute to the development and review of job hazard analyses to identify risks and control measures. Support incident, near-miss, and claim investigations and communications. Maintain working knowledge of company HSE standards, programs, and objectives. Promote HSE goals across projects to ensure a safe and productive environment. Assist in developing routine HSE project plans and specifications. Provide input for audits, inspections, evaluations, and incident investigations. Maintain required reports and documentation to meet corporate and regulatory standards WHAT YOU'LL NEED TO BE SUCCESSFUL: Proficient in Microsoft Office Suite (Outlook, Word, Excel, etc.); Oracle preferred Professional verbal and written communication skills Professional interpersonal and customer service skills Demonstrated organizational skills and attention to detail Acquire a thorough understanding of the organization's hierarchy, jobs, qualifications, and supporting administrative practices. Demonstrated time management skills with a proven ability to meet deadlines Ability to develop analytical and problem-solving skills Prioritize and manage multiple tasks, changing priorities as necessary Work under time pressure and adapt to changing requirements with a positive attitude Self-motivated, proactive and an effective team player Interact effectively and professionally with all levels of employees within regional business unit, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: 4 Year related degree, OR High School Diploma and Minimum 4 years related experience. OSHA 30, First Aid/CPR, STS-C Ability to spend 80% of working time on active construction sites. TRAVEL: Up to 25 % as needed WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning. Noise level is usually low to medium; it can be loud on the jobsite. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Occasional lifting of up to 30 lbs. YOU Matter - Our Benefits ESOP - Employee Stock Ownership 401K Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionPosition summary: The Site Supervisor will be responsible for the day-to-day operations at our project locations. Working closely with project managers, you will manage the day-to-day operation of the job site from launch through completion, directing and monitoring the progress of subcontractors while keeping the project on schedule. You will communicate with our team of Project Managers and Engineers, as well as with the customer’s on-site representative(s). Job Responsibilities: • Run day to day operations at the customer installation site., • Coordinate with project manager on job budgets, schedules, progress reports, and cost reports. Maintain documentation that reflects accurate progress., • Coordinate the activities of subcontractors to permit them to perform their work effectively and safely, as well as integrating it with project schedules and progress., • Regularly communicate with our customer, including preparing progress reports and issuing updates to progress schedules., • Keep all key stakeholders informed on job progress, plans, and problems that could significantly affect costs or schedules. Job Requirements:, • A proactive and assertive mindset; the desire and ability to anticipate and resolve potential issues, • Excellent problem solving and customer service skills, • Deadline driven and detail oriented, • Strong communication skills, • Team-oriented and collaborative, • Ability to develop effective relationships with clients, designers and subcontractors, • Experience with OSHA compliance regulations and maintaining construction site safety, • Bilingual in Spanish a plus, • Extensive travel within US/CA is required, • Experience supervising constructions sites required

Job DescriptionSalary: $140k-$190k base salary DOE Mission-Critical Data Center Construction | QA/QC Manager LOCATION Amarillo, TX (US) TRAVEL Site-based; up to 100% EXPERIENCE Minimum 5 years Cx-QA/QC experience Compensation: $140k - $190k Annual base salary, dependent on experience and location We're seeking two (2) experienced QA/QC Managers who will each join one of two dedicated/core four-person QA/QC project teams supporting the quality assurance and quality control program for two large-scale data center construction projects in Amarillo, Texas. As part of this team, you will provide program-level leadership and continuity across the entire project, as well as additional oversight capacity to ensure the highest standards of quality across every phase of these mission-critical builds. This is a field-based positionrequiring regular weekly travel and on-site work at client project locations, as assigned. The initial assignment is in Amarillo, TX. The initial assignment is expected to last several months, with future assignments varying based on project needs and client requirements. Candidates must maintain a permanent residence and be willing to travel to assigned project sites on a weekly basis. The company offers travel expense reimbursement in accordance with company policy. Position Overview: The QA/QC Manager leads the quality assurance and quality control program for data center construction projects, ensuring that all work delivered by trade contractors, vendors, and internal teams meets project specifications, applicable codes, owner standards, and industry best practices. This role combines strategic program ownership with hands-on field leadership to uphold the highest standards of safety, quality, and reliability across mission-critical environments. The QA/QC Manager directs a team of electrical, mechanical, and civil/structural QA/QC specialists and inspectors, establishing the policies, procedures, and workflows that govern quality across the project lifecycle from design review and constructability analysis through installation, commissioning, and turnover. The role serves as the primary quality interface with the owner, general contractor, commissioning authority, and third-party testing agencies. The ideal candidate brings extensive experience in construction quality management on data center or mission-critical projects, strong leadership and mentoring skills, and the ability to balance program-level strategy with the tactical demands of an active construction site. Key Responsibilities: QA/QC Program Leadership • Develop, implement, and continuously improve the project-specific QA/QC program, including the Project Quality Plan (PQP), inspection and test plans (ITPs), checklists, procedures, and reporting standards., • Align the QA/QC program with owner requirements, applicable codes, and industry standards (IEEE, NFPA, NEC, ASHRAE, SMACNA, NEBB, AABC, ASME, NETA) and adapt the program as project scope or client expectations evolve., • Establish quality KPIs and dashboards to measure program effectiveness, track trends, and drive accountability across trades., • Lead lessons-learned reviews at project milestones and feed improvements back into standard procedures and playbooks. Team Leadership & Development • Lead, mentor, and develop a multidisciplinary team of QA/QC specialists and inspectors covering electrical, mechanical, civil/structural, and commissioning scopes., • Manage team staffing, workload balancing, and schedule coverage across multiple project sites and shifts, including night and weekend testing events., • Conduct performance reviews, provide coaching, and identify training and certification opportunities to strengthen technical depth and consistency across the team., • Foster a cooperative, improvement-oriented culture that emphasizes safety, professionalism, and constructive communication under pressure. Field Execution & Oversight • Oversee day-to-day QA/QC field activities, including inspections, surveillance, witness points, hold points, and punch list management through L1L5 commissioning phases., • Coordinate closely with the Energy Marshal and commissioning leadership to confirm pre-energization verifications, LOTO readiness, and safe execution of testing events., • Manage the non-conformance report (NCR) process ensuring timely identification, documentation, root-cause analysis, corrective action, and verification of closure., • Review and approve Factory Acceptance Test (FAT) protocols and results for major equipment (switchgear, UPS, generators, transformers, chillers, CRAHs, PDUs) and oversee closure of deferred items prior to site delivery., • Validate integration and interoperability between electrical, mechanical, and control systems, and oversee corrective actions through retesting prior to turnover. Stakeholder & Client Management • Serve as the primary QA/QC point of contact for the owner, general contractor, commissioning authority, design team, and third-party testing and inspection agencies., • Represent the QA/QC organization in executive-level project reviews, risk workshops, and owner audits, providing clear reporting on quality posture, risks, and mitigation plans., • Partner with project management, safety, and scheduling leads to ensure quality milestones are integrated into the master schedule and resourced appropriately., • Interface with hyperscale or colocation owner QA/QC representatives and adapt the program to align with client-specific standards, platforms, and turnover requirements. Documentation & Reporting • Oversee the collection, integrity, and turnover of QA/QC documentation including inspection reports, checklists, MOPs, test verification forms, NCR logs, and as-built records within approved customer platforms (e.g., Procore, Bluebeam, Cx Alloy, Aconex)., • Ensure timely compilation and submission of commissioning reports, turnover packages, O&M manuals, training materials, warranties, and attic stock records., • Produce executive-level weekly and milestone reports summarizing quality status, open NCRs, audit findings, and readiness for energization, IST, and final turnover. Risk, Budget & Vendor Management • Identify and manage quality-related risks to cost, schedule, and reliability, escalating appropriately and leading recovery plans when required., • Manage the QA/QC budget, including staffing, third-party testing, and specialty inspection services., • Evaluate and qualify vendors, subcontractors, and third-party inspection agencies; lead pre-award quality reviews and ongoing performance monitoring. Qualifications: Education: • Bachelors degree in Construction Management, Civil/Mechanical/Electrical Engineering, or a related field. Equivalent experience may be considered., • Relevant certifications strongly preferred, such as USACE Construction Quality Management for Contractors (CQM-C), ASQ Certified Manager of Quality / Organizational Excellence (CMQ/OE), Certified Construction Manager (CCM), Certified Commissioning Professional (CCP), PMP, or LEED Accredited Professional., • OSHA 30 Construction certification Experience: • Minimum of 10 years of construction QA/QC experience, with at least 5 years on data center, mission-critical, or other complex industrial/commercial projects., • Minimum five (5) years of direct experience in QC of MEP equipment, • Minimum of 3 years in a supervisory or management role overseeing a multidisciplinary quality program and QA/QC team., • Demonstrated experience owning project-level QA/QC programs, including plan development, ITPs, NCR management, and turnover., • Strong working knowledge of electrical and mechanical systems typical of data centers switchgear, UPS, generators, transformers, PDUs, chilled water systems, CRAH/CRAC units, and airflow management., • Working knowledge of data center Tier classifications and redundancy topologies (e.g., Uptime Institute Tier III/IV, N+1, 2N, 2N+1) and their impact on commissioning and quality sequencing for concurrent maintainability., • Broad familiarity with applicable standards and codes IEEE, NEC, NFPA, NETA, ASHRAE, SMACNA, NEBB, AABC, and ASME. Skills: • Proven leadership, mentoring, and team-building skills, with the ability to develop and retain technical talent across disciplines., • Strong program management and organizational skills; able to operate simultaneously at strategic and tactical levels., • Exposure to Building Management Systems (BMS/BAS), Electrical Power Monitoring Systems (EPMS), and SCADA platforms as they relate to integrated testing and commissioning., • Proficient with commissioning and project management platforms such as Cx Alloy, Bluebeam, Procore, Aconex, and Microsoft Office (Excel, Project, PowerPoint)., • Excellent written and verbal communication skills, with experience presenting to executive and owner stakeholders., • Strong analytical, problem-solving, and decision-making skills under pressure., • Sound judgment and discretion when handling confidential owner information and NDAs typical of hyperscale projects. Working Conditions: • Travel up to 100% to data center project sites, for the duration of assignments as required., • Ability to work in construction and industrial environments, including exposure to varying temperatures, noise levels, and confined spaces; ability to perform regular site walkdowns and climb ladders, stairs, and scaffolding as needed., • Ability to support night shift and weekend testing events. Energization events, load bank tests, and Integrated Systems Testing (IST) often occur on nights and weekends to avoid impacting construction activities., • Extended hours expected during critical project phases, particularly around energization, IST, turnover, and project close-out. Compensation & Benefits: • $140,000 - $190,000, dependent on experience and location, • Health Benefits: Medical, Dental, Vision, LTD/STD, Life-AD&D, • Retirement: 401(k), discretionary Pension & Profit sharing, subject to Plan documents, • 15 days paid time off (prorated based on start date) and 8 holidays, • Company credit card for qualified travel expenses, • NFPA 70E Arc Flash training provided, • Professional development and certification reimbursement opportunities Pre-Employment Requirements: • Successful completion of a background check., • Successful completion of drug testing., • Must have a valid US driver's license, • Must have permanent residence in CONUS with access to a primary airport for weekly travel About Vertex Vertex Innovations has supported mission-critical and data center deployments nationwide for more than two decades. Our teams provide construction oversight, QA/QC, commissioning support, and technical program management for hyperscale, enterprise, and telecom clients. We deliver quality, reliability, and trusted partnership on every project. Vertex Core Values • Integrity To move through the world with honesty and truth empowering our employees, clients and communities through our words and actions., • Accountability To take full ownership and responsibility in our roles as we serve our company, clients and communities., • Commitment To stand behind our word and our promises, • Respect To embrace and honor the individuals, clients, and companies in their contribution to the work that we create together through our interactions, conversations and our way of being., • Performance To allow ourselves to be measured by our commitments and be accountable for every action to our employees, clients, and communities. VERTEX Innovations, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionCompany Description WHO ARE WE? We've been serving clients for over 75 years. The companies that began independently and now form Dexterra Group have an outstanding record of supporting the infrastructure and built assets that play a vital role in our society and helping our clients achieve higher performance and productivity. Powered by passionate people, we bring the right teams with the right skills together – offering both experience and regional expertise so companies can operate their day to day, confidently and successfully. Job Description WHAT’S THE JOB? The Potable Water and Wastewater Treatment Operator is responsible for the safe, compliant, and efficient operation, monitoring, and maintenance of water and wastewater treatment systems supporting the workforce accommodations facility. This role ensures that all treated potable water meets public health standards and that wastewater discharge complies with state and federal environmental regulations. The operator will work in accordance with standards established by the Texas Commission on Environmental Quality (TCEQ), the U.S. Environmental Protection Agency (EPA), and applicable local authorities. YOUR WORK WILL INCLUDE Operations & Monitoring • Operate and monitor potable water treatment systems (filtration, chlorination, disinfection, storage, and distribution), • Operate wastewater treatment processes (aeration, clarification, sludge handling, disinfection), • Perform routine sampling, testing, and analysis (pH, turbidity, chlorine residual, BOD, TSS, etc.), • Adjust chemical dosing and system controls to maintain compliance, • Rotating shifts, on-call duties, and emergency response requirements Compliance & Reporting • Ensure compliance with:, • Safe Drinking Water Act (SDWA), • Clean Water Act (CWA), • TCEQ rules and permit requirements (e.g., TPDES permits), • Maintain accurate operational logs, lab records, and compliance reports, • Report incidents, exceedances, or system failures immediately Maintenance & Troubleshooting • Conduct preventative maintenance on pumps, valves, blowers, and instrumentation, • Diagnose and resolve mechanical, electrical, and process issues, • Coordinate repairs with maintenance teams and contractors Health, Safety & Environmental • Follow OSHA safety standards and site-specific procedures, • Handle chemicals safely (chlorine, coagulants, polymers, etc.), • Ensure proper sludge and waste disposal practices, • Exposure to chemicals, noise, and biological hazardsQualifications WHO ARE WE LOOKING FOR? Required Certifications (Texas – TCEQ) Candidates must hold the following certifications issued by the Texas Commission on Environmental Quality: Water Treatment Certification • Class D (entry-level) – minimum requirement for small systems, • Class C / B / A – required based on system size and complexity Additional Licensing & Requirements • Valid Texas Driver’s License, • Ability to pass background check and drug screening, • Confined space entry and HAZWOPER training (preferred), • First Aid/CPR certification (preferred) Education & Experience • High school diploma or GED required, • Post-secondary education in environmental science, engineering technology, or related field preferred, • 1–5+ years of experience in water/wastewater operations (depending on certification level), • Experience with SCADA systems and automated controls is an asset Skills & Competencies • Strong understanding of water and wastewater treatment processes, • Mechanical aptitude and troubleshooting ability, • Knowledge of laboratory testing procedures, • Attention to detail and regulatory compliance, • Ability to work independently and in remote or industrial environments Additional Information Dexterra is an Equal Opportunity Employer. We do not discriminate in employment based on race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, age, disability, genetic information, or any other status protected by applicable law. #IND 2

Job Description Job title Heavy Haul Driver-Wind Reports to Director of Wind & Renewables Job Based in Oklahoma Who we are Crane Services, Inc. (CSI) offers a wide variety of crane, rigging, heavy haul, and alternative movement solutions. The branches comprising CSI take great pride in being one of the largest and most experienced crane businesses in North America. Our branch locations are strategically positioned across the Rocky Mountain region, Southwest, Midwest, of the United States where our knowledgeable team of professionals provide full-service solutions for their customers’ toughest challenges. CSI’s Vision and Shared Purpose: Through reliability, capability, and integrity, CSI is the preferred partner and employer in the crane, rigging and heavy haul industry. Our Team Members lift what others cannot and solve the unsolvable. CSI’s Core Values: · Show up hungry. · Don’t accept average. · Think independently. · Lift as one. Job purpose The Heavy Haul Driver works closely with escorts and OTR dispatch and is responsible for hauling oversize / overweight loads on hydraulic transporters, trailers, and other hauling equipment. Experience of hauling wind energy components blades, nacelles and towers a plus. The Truck Driver will be responsible for loading and unloading trucks and trailers and assists project managers with job planning. Duties and responsibilities • Using the company’s heavy hauling equipment, drives trucks hauling loads to job sites or customers’ other specified destinations, • Prepares heavy hauling loads for delivery., • Loads and unloads equipment, assembles and disassembles equipment as needed., • Other duties as assigned by Hydraulic Truck Coordinator Responsibilities: • Ensure the stability and integrity of all equipment loaded and transported., • Oversees the care and maintenance of assigned trucks and trailers., • Ensures trucks are kept clean and free of clutter, ensures proper licensing and inspections are kept current and coordinates the necessary maintenance and repairs of equipment., • Ensures all safety regulations are followed Qualifications • Team player attitude., • Ability to work with minimal supervision., • Ability to communicate effectively with all levels of the organization. Ability to follow oral and written procedures., • Minimum Qualifications & Experience:, • Must have a minimum of 3 years of consistent safe driving history as a full-time driver, • Must have obtained a Class A CDL; additional endorsements (doubles/triples) preferred, • Must be able to pass a DOT Medical Physical and possess a valid medical certificate, • Knowledge of FMCSA, OSHA and oversize regulations, • Must be able to understand and apply established procedures, • Must be able to speak, read and write English, • Must be able to obtain a TWIC (Transportation Workers Identification Credential) card, • Minimum Level of Education: High School Diploma or Equivalent Working conditions The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodation may be provided to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement Crane Service Inc provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description SUMMARY: The Maintenance Manager will oversee all maintenance operations within our food manufacturing facility. This role is critical to ensuring the reliability, efficiency, and safety of all plant equipment and infrastructure. KEY RESPONSIBILITIES: • Develops communicates and fosters group and individual performance plans in alignment with Company culture, goals and objectives, • Responsible for mechanical and electrical systems, preventive maintenance, and team leadership within a regulated food production organization, • Responsible for promoting safety awareness and keeping safety as a number one priority daily Ensure compliance with OSHA and other safety regulations., • Ensure the team follows the procedures with controlled documents, initiating change as needed for currency and relevancy, training respective departments on document changes., • Responsible for talent selection, onboarding, assimilation, and performance management of team members, • Ensure effective and efficient maintenance of the facility with a culture of continuous improvement, • Provide necessary planning to ensure the reliability of the plant and associated systems by use of predictive and preventative maintenance programs., • Actively work to prevent/eliminate hazards that cause injury or illness., • Maintain compliance with food safety regulations (e.g., FDA, USDA, SQF, HACCP)., • Manage maintenance budgets, spare parts inventory, and vendor relationships., • Ensure all equipment (e.g., pasteurizers, vats, packaging machines, refrigeration systems) operates efficiently and safely., • Collaborate cross functionally with production and quality teams to minimize downtime and optimize performance., • Drive continuous improvement initiatives in equipment reliability and energy efficiency., • Perform other job functions related to the position as assigned by management QUALIFICATIONS & EDUCATION: • Bachelor’s degree in mechanical, electrical or industrial Engineering or related field, and/or equivalent technical certification required, with ten (10) years' experience in a manufacturing environment., • Mechanical or advanced technology certifications a plus, • Food production experience required, • Waste treatment knowledge and experience required, • Working knowledge of electrical, mechanical, hydraulic systems, gas systems, liquid propane, boilers, refrigeration, and air systems, • Proficiency with Microsoft Office software. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Required to maneuver plant and warehouse workspaces which involve:, • Continually standing, walking, sitting, talking, or hearing, work around loud machinery and moving parts, utilize hand and finger dexterity, exposed to extreme heat, extreme cold, wet, and/or humid conditions (non-weather), to climb, balance, bend, stoop, kneel., • Occasionally exposed to outside weather conditions, • Frequently push, pull, and lift up to fifty pounds safely.

Job Description Duininck is a fourth-generation, 100-year family-led company built on strong relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. Join specialized infrastructure projects across Texas and Oklahoma. You'll produce hot mix asphalt for military runways, construct roads for the Department of Transportation, and handle high-stakes concrete work for aviation and defense facilities. These aren't just jobs; they're careers building America's critical infrastructure. This year-round, full-time position comes with a strong benefits package including: • Competitive pay starting at $30/hour + overtime, based on experience, • Paid Time Off, • Per Diem (when applicable), • Strong Health Plans to choose from, • Dental & Vision Plans, Company Paid Life insurance & Short-Term Disability, • Position specific personal protective equipment provided, • 401K with company match, and more! This position will work an overnight schedule (9pm to approximately 9am, Monday - Friday with some Saturday work as needed). The Concrete Paving Mechanic position will diagnose and repair all heavy construction equipment in the field. To ensure success as a Concrete Paving Mechanic, you should have proven experience working with heavy concrete paving machinery, be physically fit, and be able to troubleshoot issues in the shop and on the job site. A Concrete Paving Mechanic must demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service. This position is based out of a local shop but travels to various sites as needed for equipment diagnosis and repair. Essential Duties and Responsibilities: • Driving to the job site to operate and inspect all construction equipment and components to determine needed repairs., • Assist in equipment resizing as project needs change., • Diagnosing faults and ability to read schematics., • Hydraulic troubleshooting and ability to read hydraulic schematics., • Discuss equipment problems with supervisor and/or others as needed., • Repair, replace, calibrate, adjust and/or rebuild components., • Test repaired equipment for proper operation., • Inspect, add and/or change fluids and lubricants; check and replace worn parts and perform other routine service and maintenance., • Complete all required welding and fabrication work, as needed., • Read equipment manuals, service bulletins and other resources; attend training sessions. Maintain and update knowledge of equipment to be serviced., • Reporting damaged or faulty equipment to management., • Assist with ordering parts, materials and supplies needed for repair and maintenance., • Record work performed, time and materials used for each job; maintain related work logs and records., • Operate a variety of hand and power tools, equipment, motor vehicles and heavy equipment and perform related duties as assigned by the Shop Manager., • Maintain orderliness, cleanliness and safety., • Perform the above duties following the procedures developed by management (TPR, B2W Maintain, etc) Job Knowledge, Skills and Abilities: • Previous mechanical experience on heavy equipment, specifically concrete paving equipment., • Extensive knowledge of diesel engines and construction equipment., • Strong mechanical aptitude and trouble shooting skills., • Basic welding skills., • Class A Commercial Driver’s License is preferred., • Certification as a Heavy Equipment Mechanic is a plus., • Good communication skills. Bilingual is a plus., • Understand and adhere to all safety regulations., • Understand and adhere to the Personal Protection Equipment requirements., • An unwavering focus on safety., • OSHA, • Willingness to travel throughout Texas and Oklahoma. Work Environment/Physical Demands: • Able to remain in a standing position for extended periods of time., • Must be capable of lifting arms above shoulder level to install and remove components as well as bend or stoop repeatedly over time., • Must be capable of manipulating tools in areas of limited spaces., • Able to move heavy objects (50 lbs. or more) long distances., • Work safely without presenting a direct threat to self or others., • Walk, bend, kneel, lift, stretch and sit., • Overnight hours including overtime hours, outdoors and in a variety of weather conditions at all project locations., • Travel and some Saturday work are required. Duininck is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status or citizenship status. If you would like more information on your EEO rights under the law, click here.

Job Description Position Summary We are seeking an experienced Solar Site Construction Manager to lead field operations for medium-to-large solar construction projects. This person oversees on‑site execution from mobilization through commissioning and is the primary liaison between the field, vendors and subcontractors. The Site Construction Manager ensures projects are built safely on schedule and in accordance with quality standards and in compliance with all contract documents. The Site Construction Manager communicates with the project management team to ensure field and office operations are consistent and operating at the same pace. This position is full-time, exempt, project site based. Key Responsibilities: Ensure safe working conditions and enforce company and state safety regulations. Lead the site team from mobilization through FC and handover. Oversee construction, testing, commissioning, and SCADA installation. Monitor schedule milestones and ensure adherence to EPC contractual obligations. Review IFC drawings, manage inspections, quality programs, and ITP compliance. Assist and collaborate in the resolution of construction challenges and provide input to develop corrective action or recovery plans with the management team. Provide on-site leadership, coaching, hiring support, performance evaluations, and development for field staff. Foster a collaborative, motivated team environment, maintaining company culture and values. Work with engineering, procurement, and construction teams on permitting, logistics, and resource planning. Prepare daily project update reports, status reports, and Items of Interest for the management team Validate contractor payment applications and change orders. Manage onsite records, QA/QC documentation, and project close‑out reports. Manage delivery inspections and verification of parts with procurement. Collaborate and communicate with the project management team to ensure field and office operations are running in parallel and at the same pace to avoid delays or discrepancies. Requirements: Proven 5+ years of experience as a Site Manager in solar EPC or renewable energy construction of large utility scale projects OR 3+ years of experience in solar EPC or renewable energy construction and a bachelor’s degree in a relevant field of study (Construction Management, Engineering, Business Management) Strong knowledge of construction safety programs and regulatory compliance. Experience in project scheduling, quality control, commissioning and sub-contractor management. Strong background in reading and understanding blueprints. Experience leading successful project teams, including development of employees and maintaining relationships with clients. OSHA 30 Certification. Current valid driver’s license required and insurable driving record. Powered by JazzHR kFENsmh0Ca

Job Description Plumbing Foreman – Lead Crews and Commercial Mechanical System Installations Job Overview • Company: Howards Mechanical Inc., • Salary/Pay Rate: $40 to $50 per hour (Based on experience) plus Performance Based Bonus., • Location: Amarillo, TX (20% Travel Required)., • Job/Employment Type: Full Time., • Project Scope: Commercial, Industrial, Government, and Federal., • Mandatory Licenses & Certifications: State of Texas Plumbing License. The Opportunity You will serve as a critical field leader, driving the successful execution of large-scale commercial, industrial, and federal plumbing systems. This role allows you to direct on-site crews and mentor field teams while ensuring high-quality installations for a family-owned company. You will have the field autonomy to manage project logistics, backed by a dedicated mechanical leadership team. How You Will Make an Impact • Supervise and mentor field crews of plumbing professionals to ensure high-quality project delivery., • Manage the daily execution of commercial plumbing installations in strict accordance with project plans., • Coordinate complex daily tasks and delegate responsibilities to maintain strict project timelines and budgets., • Maintain accurate documentation of daily field reports and safety meetings to ensure project transparency., • Resolve real-time technical and logistical issues on-site to prevent project delays or safety hazards., • Monitor material delivery schedules and coordinate equipment logistics to maximize on-site workflow efficiency. Required Qualifications & Experience • Active State of Texas Plumbing License., • Proven experience working as a plumbing foreman with a track record of successfully running crews., • Proficiency in reading and interpreting detailed mechanical drawings, architectural layouts, and code specifications., • Willingness to travel up to 20% for specific project assignments outside the immediate local area., • Strong leadership, communication, and organizational skills necessary for managing field logistics and team dynamics. Preferred Qualifications & Experience • Minimum of 5 years of related work experience in leadership roles within the mechanical trade., • Advanced knowledge of industrial plumbing systems and specialized federal or government installations., • Proven track record of managing project cost-control measures and material logistics on large-scale builds. Compensation & Benefits • Weekly pay cycle and performance-based bonuses available., • Competitive 401(k) retirement savings program with employer matching., • Comprehensive medical, dental, and vision insurance packages., • Life and disability insurance options with safety equipment provided., • Generous paid time off including holidays, vacation, and sick leave., • Travel projects provided with per diem, a company vehicle, and a fuel card., • Paid training programs, manufacturer training, and OSHA certifications., • Technology package including a company-provided smartphone or tablet., • Access to annual company trips, outings, and yearly family parties. About Us Howards Mechanical Inc. is a trusted name in commercial and industrial mechanical installations, operating as a family-owned and operated business. We foster a supportive environment where long-term employees thrive through dedicated mentorship and ongoing professional development. Learn more at howardsmechanical.com. Howards Mechanical Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplaceJOB SUMMARY The technicians must be able to complete diagnosis of any mechanical, electrical, or other various failures/breakdowns of a truck or its related equipment. This position will also perform disassembly, repair, and reassembly of truck engines, transmissions, carrier assemblies, clutches, brakes, electrical systems, and any other truck or related equipment adjustment/repairs. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Trained to use all tools of trade, including precision instruments and technical shop machines and diagnostic tools., • Use previous and on the job training to read and understand technical publications, including on-line service software and service bulletins. He/she must be able to use information contained in them to do their own work and to assist others concerning the content., • He/She will learn to determine usability of all component parts and must be able to list and order all needed parts using the dealer management system., • Must be able to complete work accurately and timely as outlined in published time standards guidelines., • Must be able to write and/or type a good description of all work performed on each individual repair using the dealer management system., • Ability to perform all aspects of the job safely and in accordance with OSHA and Bruckner’s rules and regulations expressed and implied., • Understands the importance of attendance and punctuality and how it directly impacts customer service., • Is a good steward of company tools and resources., • Achieves and maintains certifications as required by the company, the OEM’s or by Federal Law. EXAMPLES OF SKILLS NEEDED TO MASTER THIS LEVEL • P.M. Services, • Steam Clean, • P.D.I. Inspections, • Used Truck Inspections, • Wheel Seals, • Brake Adjustments, • Clutch Adjustments, • Pinion Seals, • Foundation brake replacement (shoes, drums, & hardware), • Battery diagnoses & replacement, • U-joints, • Shocks, • Small make ready items (mudflaps,1/4 fenders, bug screens, bug shields, & bumpers) POSITION REQUIREMENTS Education & Experience:, • High School Diploma desired., • Must possess and use good interpersonal skills to interact well with customers, vendors, and co-workers in a positive and constructive manner., • Dealership experience is preferred, • Must be able to operate various computer diagnostic devices, laptops, and tablets. Physical Demands: • Involves essential ability to maneuver around, in, on and under trucks in order to properly inspect and diagnose all types of problems and repairs., • Must be able to pass a physical and drug and alcohol screens during pre-employment screening, randomly and/or as requested throughout employment., • Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Work Conditions: The working environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Due to the urgency of some repairs, this position contains some level of stress and requires the ability to handle multiple tasks smoothly. Requires regular, predictable attendance. Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionGeneral description: The Concrete Carpenter will perform a variety of carpentry tasks. This individual will work with others and will be under the direction of a Foreman for the successful completion of each building. This person works very diligently with their hands and pays close attention to detail. Tasks include erecting and setting forms for concrete structures, foundations, buildings, and site work per specifications and drawings. This may include concrete tilt-wall forms, symon forms and/or structural forms for columns, decks, elevator cores, parking garages and other cast-in-place concrete structures. Responsibilities: • Fabricate and assemble tilt up panels., • Able to form footings, column pads and other structural concrete., • Install and align embedded items such as anchor bolts, inserts and lifting hardware., • Assist with layout as needed., • Strip forms after panels are poured., • Maintain and keep track of tools. Requirements: • Ability to read and interpret construction drawings., • Physical strength and stamina to perform tasks as needed., • Valid driver’s license and reliable transportation., • Able to work weekends if needed., • Able to provide basic hand tools for carpentry., • OSHA Certification or willingness to obtain one.

Job DescriptionDescription: Key Responsibilities Safety Program Implementation • Develop, maintain, and enforce Destructable's site-specific safety plans, standard operating procedures, and safety policies across all active project locations, • Conduct pre-mobilization safety planning for each new job site, including hazard assessments, emergency action plans, and PPE requirements, • Ensure all site safety documentation is current, accessible, and compliant with OSHA and client requirements, • Assist in developing and updating company-wide safety policies and procedures as operations evolve, • Maintain and manage safety data sheets (SDS) for all hazardous materials used on site, • Travel to active job sites to conduct safety inspections, audits, and observations on a regular basis, • Lead and document daily tailgate safety meetings, job hazard analyses (JHAs), and pre-task planning sessions with field crews, • Monitor field operations for compliance with fall protection, lockout/tagout (LOTO), PPE, respiratory protection, and heavy equipment safety requirements, • Identify unsafe conditions or behaviors and take immediate corrective action, including stop-work authority when necessary, • Serve as the on-site safety resource for crane and rigging operations, blade processing, and climbing activities, • Verify all crew members hold current required certifications including GWO, OSHA, and equipment operator credentials, • Deliver and coordinate safety training for new hires and existing field personnel including OSHA 10/30, first aid/CPR, fall protection, and site-specific orientations, • Track and manage employee safety certifications, training records, and renewal schedules, • Develop toolbox talk materials and safety communications relevant to Destructable's field operations, • Coach and mentor field supervisors and crew leads on safety leadership and hazard recognition, • Investigate all incidents, near-misses, and unsafe conditions thoroughly and document findings in a timely manner, • Conduct root cause analyses and develop corrective action plans to prevent recurrence, • Prepare and submit required OSHA recordkeeping documentation including OSHA 300 logs, • Report incident trends and safety performance metrics to leadership on a regular basis, • Serve as the primary point of contact for regulatory agencies during any site inspections or investigations, • Ensure multi-state regulatory compliance, researching and applying state-specific safety requirements for each project location, • Coordinate with the Project Coordinator and Superintendent on permit requirements, environmental compliance, and site-specific safety obligations, • Maintain all required safety records and documentation in accordance with federal, state, and client requirementsRequirements:, • Construction Health and Safety Technician (CHST) certification, • 3+ years of experience in a construction, industrial, or field safety role, • Demonstrated experience conducting JHAs, safety audits, incident investigations, and safety training, • Ability to travel extensively to multi-state job sites with 2–4 week rotations, • Strong communication and interpersonal skills able to influence safety culture at all levels, • Valid driver's license with a clean driving record, • Experience in wind energy, heavy civil, demolition, or industrial recycling operations, • OSHA 30 Construction certification, • First Aid / CPR / AED instructor certification, • Experience with crane and rigging safety oversight, • Familiarity with GWO standards and wind industry safety requirements

Job DescriptionDescription: Position: Safety Manager Department: Health, Safety, Security, and Environmental (HSSE) Reports To: Director, Health, Safety, Security, and Environmental (HSSE), Fermi America Location: Fermi Matador Combined-Cycle Power Plant, Panhandle, Texas (on-site / field-based) Direct Reports: Safety Coordinators (field-based) Employment Type: Full-time, exempt Position Summary The Safety Manager leads and directs all field safety operations for the Fermi Matador power plant construction site, driving an incident- and injury-free culture across all Fermi America personnel, contractors, and subcontractors. Reporting to the Director of HSSE, the Safety Manager owns the day-to-day site safety program, setting standards, ensuring OSHA and regulatory compliance, and leading a team of field Safety Coordinators who provide direct oversight at the work face. This is a hands-on, field-based leadership role responsible for protecting the workforce while keeping a large, complex construction project on schedule. Key Responsibilities • Program leadership. Own and continuously improve the site safety program, policies, and procedures; ensure alignment with OSHA, Fermi America standards, and owner/EPC requirements., • Team management. Supervise, mentor, and schedule field Safety Coordinators; assign zone/contractor coverage and ensure consistent enforcement across the site., • Field presence. Conduct and oversee daily site walks, inspections, and audits; verify hazard controls, permits (hot work, confined space, LOTO, excavation), and safe work practices at the work face., • Incident management. Lead incident and near-miss investigations, root cause analysis, corrective actions, and OSHA recordability determinations; ensure timely, accurate reporting., • Contractor oversight. Hold contractors and subcontractors accountable to site safety expectations; review contractor safety plans, JSAs, and pre-task planning., • Training & orientation. Ensure site safety orientation, toolbox talks, and required training are delivered and documented for the workforce., • Emergency preparedness. Maintain and drill emergency response, evacuation, mustering, and medical response plans in coordination with site operations., • Metrics & reporting. Track leading and lagging indicators; report safety performance, trends, and risks to the Director of Safety & Environmental and project leadership., • Regulatory interface. Serve as a point of contact for OSHA and regulatory inspections; maintain required logs, records, and documentation.Requirements:Required Qualifications, • Bachelor's degree in Occupational Safety, Industrial Hygiene, Engineering, or related field, or an equivalent combination of education and directly relevant experience., • 10+ years of construction safety experience, with 5+ years in a safety leadership/management role on large industrial, power, or heavy-civil projects., • In-depth knowledge of OSHA 1926 (construction) standards and applicable federal and Texas state regulations., • Demonstrated experience leading a team of safety professionals in a field environment., • Strong incident investigation, root cause analysis, and corrective action skills., • Excellent communication skills with the ability to influence and hold accountable at all levels, from craft to executive.Certifications Required, • OSHA 30-Hour Construction (required); OSHA 500/510 trainer credential preferred., • CSP (Certified Safety Professional) or CHST (Construction Health & Safety Technician) required., • Current First Aid / CPR / AED certification., • Valid driver's license.Preferred Qualifications, • Experience on combined-cycle power plant, EPC, or large greenfield industrial construction., • Any additional BCSP credentials.Familiarity with digital safety/observation and workforce-tracking systems.Physical & Site Requirements, • Full-time presence on an active construction site in the Texas Panhandle, including exposure to heat, cold, dust, noise, and uneven terrain., • Ability to walk the site for extended periods, climb ladders/stairs, and access elevated and confined areas., • Ability to wear required PPE at all times in the field., • Availability to support extended shifts, and occasional nights/weekends as project needs require. Fermi America is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description B.H. Inc. is searching for a full-time EHS Manager in Turkey, Texas to manage all safety aspects of construction projects. Are you a skilled safety professional who is looking to take your career to the next level with a company that has an outstanding company culture and team atmosphere? If so, keep reading! We are looking for the best candidates for our leadership team and are offering a competitive annual salary of $90,000–$110,000, earned and paid weekly. We offer great benefits including health, vision, dental, life insurance, a 401k plan with match, and paid time off (PTO). If this sounds like the opportunity that you've been looking for, apply today! QUALIFICATIONS: • OSHA 500 required, • 5+ years of construction safety experience, • Familiar with MEP (Mechanical, Electrical, Plumbing), • Willingness to travel frequently, • Clean driving record We are really looking for a self-driven professional who pays attention to detail and can lead with minimal supervision. Do you have a proactive, positive, and professional attitude? Are you able to mentor a team while maintaining high integrity? Do you have a strong work ethic and a commitment to safety? If so, you might just be perfect for this EHS Manager position! ABOUT B.H. INC. Brad Haslem of Vernal, UT, started BHI with six others in 1998. What began as a small electrical company is now a multi-faceted powerhouse that offers various construction services. Our services include instrumentation and electrical, civil and excavation, facilities and pipeline, construction management, wireless and communications, and engineering. BHI is recognized and respected nationwide in the industries we serve. We are a group of highly motivated, aggressive, goal-oriented individuals who love working as a team and growing our organization. We look at each other as family, not merely co-workers who punch the same clock. We firmly believe our core responsibility is to develop people and provide for families. We have a positive work environment here at BHI and offer excellent pay and generous benefits. READY TO JOIN OUR TEAM? We understand your time is valuable, so we have a very quick and easy application process. If you feel you would be the right fit, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! EEO, including disability and vets. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. #INDSJ1 Job Posted by ApplicantPro

Job Description Job title Heavy Equipment and Forklift Mechanic Reports to Operations Manager FLSA Non-Exempt Workers’ Comp Status Machinery Dealer NOC (Code 8107) Job purpose The Heavy Equipment and Forklift Mechanic is responsible for diagnosing, repairing, maintaining, and inspecting agricultural, construction, and material handling equipment, including tractors, skid steers, forklifts, telehandlers, and other heavy machinery. This position ensures equipment operates safely, efficiently, and in compliance with company and manufacturer standards. Duties and responsibilities • Perform preventative maintenance and repairs on farm equipment, forklifts, and other heavy machinery., • Diagnose mechanical, hydraulic, electrical, and engine-related issues using diagnostic tools and equipment., • Repair and replace engines, transmissions, hydraulic systems, brakes, steering components, and electrical systems., • Conduct equipment inspections and identify safety concerns or maintenance needs., • Troubleshoot and repair diesel and gasoline-powered equipment., • Complete work orders, maintenance records, and inspection reports accurately and timely., • Maintain a clean and organized work area and service vehicle., • Follow all company safety policies and OSHA regulations., • Communicate equipment status, repair recommendations, and parts needs to supervisors and customers., • Operate equipment safely for testing and verification of repairs., • Assist with field service calls as needed., • Preform any other tasks as required by the Manager Qualifications Education/Experience • High school diploma or equivalent,, • Technical school training in diesel technology, heavy equipment repair, or related field preferred., • Valid driver license, with good driving record, • Forklift operator’s license/certification, • Physical requirements Knowledge • Microsoft Office Suite (Excel, Word, PowerPoint, and Outlook), • Knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of principles and processes for providing customer and personal services, • In depth mechanical knowledge of material handling products, • Strong understanding of diesel engines, hydraulic systems, electrical systems, and diagnostic procedures. Skills • Troubleshooting- Determining causes of operating errors and deciding what to do about it, • Operation Monitoring- Watching gauges, dials, or other indicators to make sure a machine is working properly, • Systems Analysis- Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes, • Equipment Selection- Determining the kind of tools and equipment needed to do a job, • Complex Problem Solving- Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions, • Operation and Control- Controlling operations of equipment or systems, • Critical Thinking- Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems, • Speaking- Talking to others to convey information effectively, • Time Management- Managing one’s own time and the time of others, • Active Listening- Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times Abilities • Ability to operate heavy equipment equipment, • Ability to operate any other related power equipment, • Ability to listen and understand information and ideas presented, • Ability to combine pieces of information to form general rules or conclusions, • Ability to work well with others, • Ability to apply general rules to specific problems to produce answers that make sense, • Ability to focus on a single source of sound in the presence of other distracting sounds, • Ability to speak clearly so others can understand you, • Ability to carry heavy objects, stoop, knee, crouch, or crawl to be able to move certain materials that cannot be moved with power equipment Other characteristics such as personal characteristics • Independent worker, • Commitment to company vision and mission, • Awareness of lean business principles Travel This position travels from job to job. Working Environment and Physical demands The work environment characteristics described here represent those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Working environment While performing this duty, the employee will be exposed to noisy shop environment. When performing the duties of this job, it is a requirement to wear Personal Protective Equipment whenever necessary. Physical requirements While performing this duty, the employee will be required to frequently sit, walk, talk, and listen. The employee is required to frequently use hands to fingers, handle, feel objects or controls to include products we service, computer, and other office equipment. The employee must often stand, kneel, bend over, walk, and lift and/or move up to 50 pounds. Employee will be exposed to hazardous materials, i.e., grease, fuel, pressured gas, and/or oil. The employee will be required to kneel, sit, stand, and lay on hard surfaces, i.e., concrete and/or asphalt. Appropriate material handling equipment should be used to lift or move items that are heavy or bulky. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionJoin the Team That Lifts the Heavy Stuff At Crane Services, Inc. (CSI), we don’t just move equipment we move what others can’t. As one of the largest and most experienced cranes and rigging companies in North America, we tackle tough jobs across the Rocky Mountains, Southwest, and Midwest. The Oiler/Rigger/Driver assists the Crane Operator in maintenance and assembly of the crane. Must possess a strong work ethic with the ability to work within a team, reporting directly to the lead Crane Operator and/or A/D Director in the processes and procedures for the assembly, disassembly, and day-to-day operations of the equipment. What You’ll Do • Safety is a priority. Ensure that all activities are in accordance with company safety policies and procedures., • Maintain daily activity and inspection paperwork turn in at the end of each shift., • Report any concerns to the Supervisor immediately. Concerns can be with personnel, equipment, client, scope of work, etc., • Inspections: Pre-trip, post trip, daily, weekly, and monthly equipment inspections., • Inspect site for any hazards that may hinder the ability to perform the assigned work safely and/or efficiently., • Assist and/or lead the morning tailgate discussions to ensure all personnel understand their role(s) for each day., • Know the crane and manufacturer’s lubrication specifications., • Assist the operator with any maintenance required., • Assist with the moving of the crane., • Check fluid levels as specified by the manufacturer., • Keep the equipment in a clean and safe condition., • Perform any tasks the operator deems necessary., • Maintain DOT book if necessary., • Follow all company policies and guidelines., • Follow directions carefully., • Perform minor repairs to cranes/equipment., • Give and understand hand signals., • Inspect, grease, fuel, and maintain crane/equipment to assure any concerns/problems are caught timely. WHAT WE’RE LOOKING FOR Qualifications include: • Class A CDL, • Possess a minimum of a high school diploma or equivalent, • Must be able to pass a drug test, background check, and fit for duty test, • Flexibility to work overtime when necessary, • NCCCO Rigger I certification (Preferred), • OSHA 10 (Preferred), • CPR (Preferred) Our Values We believe in doing the job right, backing each other up, and showing ready to work. Our core values: • Show up hungry, • Don’t accept average, • Think independently, • Lift as one If you’re a problem-solver and you’re looking for a company that respects your skills apply today and join a team that gets the job done. Working Environment The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. • Lifting, carrying, reaching, pushing, and/or pulling; climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling; and significant finger dexterity necessary., • Ability to lift 75 lbs., • Must be able to pass a pre-employment WorkSTEPS physical., • Requires passing a pre-employment background check and drug screen to the satisfaction of Crane Service Inc. Company., • This position is exposed to work near moving mechanical parts, and moderate noise levels., • Must possess a clean MVR & valid Driver's License, • This job requires the ability to obtain a DOT Medical Certification., • Requires working and driving outdoors in various climates/temperatures and the possibility of sitting for an extended period. Physical requirements The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodation may be provided to enable individuals with disabilities to perform the tasks. EEO Statement Crane Service Inc provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionHigher Level BCSP Cert Required CHST / GSP / ASP / CSP You will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. This is a full-time traveling position. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • At least (3) years of safety experience or combination of education/multiple years experience in building construction;, • With a working knowledge of safety/environment principles and techniques., • OSHA 30-hour construction accreditation., • OSHA 500 Outreach Trainer is a plus., • Computer skills with familiarity with Microsoft Office., • Bilingual is a plus.

Job DescriptionYou will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. This is a full-time traveling position. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • At least (3) years of safety experience or combination of education/multiple years experience in building construction., • With a working knowledge of safety/environment principles and techniques., • OSHA 30-hour construction accreditation., • OSHA 500 Outreach Trainer is a plus., • Computer skills with familiarity with Microsoft Office.

Job DescriptionGeneral description: The Concrete Laborer will be an asset to the team. This person will be responsible for doing a variety of tasks to help support the construction team. This position requires physical labor and is best for someone that is willing to learn and work under the guidance of different trades. Responsibilities: • Assist with preparation and setting up concrete forms., • Transport the necessary materials to different work areas., • Load and unload materials off trucks., • Help prepare work sites daily., • Assist in various other tasks for other field personnel. Requirements: • Willingness to learn and receive guidance from others., • Basic knowledge of construction tools and equipment, • Previous experience in the construction field (preferred), • Valid driver’s license and reliable transportation, • Able to work weekends if needed., • OSHA Certification or willingness to obtain one. Working conditions: • Work outside in various weather conditions., • Able to lift at least 50lbs.

Job Description About Roberts Ditching Since 2007, Roberts Ditching has provided professional and reliable underground utility and excavation services across West Texas. We proudly serve electric utility companies, municipalities, renewable energy companies, telecom companies, and residential/commercial developments. Our experienced and fully insured team is committed to delivering safe, high-quality, and efficient solutions that keep critical infrastructure running. Our mission is to maintain the highest levels of professionalism, honesty, integrity, and fairness with our customers by gaining their trust and exceeding expectations through exceptional performance from every employee. Role Summary Roberts Ditching is seeking a skilled Boring Machine Locator (HDD Locator) to support directional drilling operations across West Texas. This role is responsible for tracking and guiding the drill head using electronic locating systems to ensure accurate bore paths, avoid existing utilities, and maintain job safety and efficiency. This is a critical, high-responsibility role that works directly with the drill operator and crew to execute successful underground installations. Key Responsibilities Operate locating equipment (e.g., Digitrak, Subsite) to track drill head position, depth, and alignment Guide the drill operator to maintain proper bore path and avoid existing utilities Read and interpret bore plans, profiles, and utility markings Maintain constant communication with the drill operator during operations Verify clearances and ensure compliance with safety and utility locating standards Identify potential conflicts and adjust bore path as needed Assist with job site setup, potholing, and verification of existing utilities Support crew operations and assist with equipment as needed Maintain and calibrate locating equipment Qualifications 1–3+ years of experience as an HDD Locator Hands-on experience with locating systems such as Digitrak, Subsite, or similar Understanding of bore plans, elevations, and underground utility layouts Strong communication skills and ability to work closely with operators Ability to work outdoors in all weather and job site conditions Willingness to travel Preferred Qualifications Experience supporting fiber, telecom, or power distribution projects Ability to operate additional equipment (mini excavator, skid steer, etc.) CDL (Class A or B) OSHA or safety certifications

Job Description ???? Work in CO, NE & KS ???? Rotation schedule available | ???? Sign-on bonus (ask recruiter) We’re hiring experienced tower climbers for telecom work. If you’ve climbed, rigged, and built towers before, we want you on the crew. Candidates must reside in Texas, Colorado, Kansas, Nebraska or South Dakota. What You’ll Do • Climb towers (up to 500 ft) to install and maintain antennas, radios, and cabling, • Run coax and fiber, install connectors, and perform sweep and fiber testing, • Install mounts, RRUs, masts, supports, and other tower equipment, • Work on microwave dishes (1 ft–10 ft), • Troubleshoot RF, fiber, and equipment issues, • Build and modify towers (monopoles, guyed, self-supports), • Load/unload gear, keep sites clean, and complete job paperwork, • Lead crew members if you’re in a Top Hand/Foreman role What You Need • At least 1 year of tower climbing / telecom construction experience (comp based on experience), • Knowledge of rigging, knots, and tower safety, • Able to use hand tools, power tools, and testing equipment, • Can follow directions and get the job done right the first time, • Good attitude, shows up ready to work, and works well within various teams Certs (Have Them or Get Them) • Climber/Rescue cert, • OSHA 10 (OSHA 30 required after hire), • First Aid / CPR Requirements • 21 or older with a valid driver’s license, • Pass background check, MVR, and drug test, • Lift 75 lbs. and handle long days, • Work outside in all weather What You Get • Steady work on active telecom projects, • Sign-on bonus, • Travel + rotation schedules, • Opportunity to move up to Top Hand or Foreman If you show up, work hard, and know your way around a tower, apply today!

Job Description Position Summary The Civil Foreman is a hands-on field leader responsible for managing crews performing earthwork, grading, underground utilities, and site development work. This role is accountable for daily production, safety, quality, crew coordination, and achieving project goals in the field. Key Responsibilities Crew Leadership & Execution • Lead and supervise field crews performing grading, excavation, and utility installation., • Establish daily work plans and communicate expectations., • Ensure crews remain productive, organized, and aligned with project goals., • Hold team members accountable for safety, quality, and production. Utility Installation & Civil Construction • Oversee installation of:, • Water systems, • Sewer systems, • Storm drainage, • Conduit and utility infrastructure, • Ensure proper trenching, bedding, pipe placement, and backfill operations., • Verify layout, elevations, slopes, and tie-ins. Quality & Safety • Verify grades, elevations, slopes, and compaction requirements., • Conduct daily safety meetings and Job Hazard Analyses (JHAs)., • Identify and resolve safety issues immediately., • Coordinate inspections and maintain compliance with project specifications. Communication & Coordination • Communicate daily with the Superintendent regarding project progress and needs., • Coordinate labor, equipment, materials, and subcontractors., • Report delays, shortages, and field issues proactively. Qualifications • Minimum 3+ years of leadership experience in civil construction., • Strong background in:, • Earthwork, • Grading, • Underground utility installation, • Ability to read plans, grades, and specifications., • Experience managing crews and coordinating equipment., • Valid driver's license. Preferred Qualifications • Experience on large commercial, infrastructure, or site development projects., • Familiarity with GPS grading systems., • OSHA 30 certification (or willingness to obtain).

Ogmint Technical Services is a Provider of Niche professionals across the Energy & Critical Infrastructure Industries. We are currently seeking a Safety Owner's Representative for a large Energy and AI Campus. This professional will serve as key member of our clients' project delivery team, providing safety leadership, regulatory compliance oversight, contractor management, and field support to their project. \n \n Project Duration: 7 + years \n \n Safety Rep 1 - 1 to 4 years of safety experience \n Safety Rep 2 - 5 to 9 years of safety experience \n Safety Rep 3 - 10+ years of safety experience \n \n Key Responsibilities Include \n\n • Monitor contractor safety performance and corrective actions.\n, • Conduct regular site safety audits, inspections, and observations.\n, • Assist with permitting and regulatory reporting requirements.\n, • Review Job Hazard Analyses (JHAs), Activity Hazard Analyses (AHAs), and work plans.\n, • Prepare detailed client and management reports while also keeping an active line of communication to the client/owner.\n\n \n Required Skills & Experience: \n\n • Background in Energy, infrastructure, or data center construction\n, • Hold basic OSHA certifications OR be able to obtain prior to start of assignment.\n, • Experience working with EPC contractors or utility owners.\n, • Valid driver's license and ability to travel.\n\n \n Ogmint Technical Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

No Staffing Agency Solicitations. \n \n Reports To: Human Resources Manager \n FLSA Status: Exempt \n Location: Amarillo, Texas Facility \n \n POSITION SUMMARY \n The Talent Acquisition & HR Specialist serves as the primary on-site Human Resources representative for the Texas facility, with a strong emphasis on full-cycle recruiting and workforce development. This role is responsible for leading high-volume and strategic hiring initiatives while supporting and managing day-to-day HR operations to ensure compliance with company policies and employment regulations. \n This position performs professional-level responsibilities across key HR functions including talent acquisition, onboarding, employee relations, payroll coordination, training and development, benefits administration, and regulatory compliance. \n The Talent Acquisition & HR Specialist partners closely with facility leadership to attract, hire, and retain top talent, promote a positive workplace culture, and ensure consistent implementation of HR policies and procedures. This role requires a highly organized, proactive professional with strong recruiting expertise and the ability to build relationships at all levels of the organization. \n \n ESSENTIAL RESPONSIBILITIES \n Talent Acquisition & Workforce Planning \n\n • Lead full-cycle recruiting efforts for hourly and salaried roles, including job postings, community outreach initiatives and sourcing, screening, interviewing, and offer negotiation.\n, • Partner with hiring managers to understand staffing needs, develop recruiting strategies, and ensure timely fulfillment of open positions.\n, • Proactively source candidates through multiple channels including job boards, referrals, community outreach, and networking.\n, • Manage applicant tracking, candidate communication, and recruiting metrics to ensure an efficient and positive candidate experience.\n, • Coordinate and participate in job fairs, hiring events, and community recruiting initiatives.\n, • Develop and maintain talent pipelines to support ongoing and future hiring needs.\n\n \n HR Operations & Employee Lifecycle \n\n • Serve as the primary HR point of contact for employees and managers at the Texas facility.\n, • Facilitate new hire onboarding, orientation, and integration into the organization.\n, • Prepare and administer employee status changes including hires, transfers, and terminations.\n, • Maintain accurate and confidential employee personnel files and HR documentation.\n\n \n Payroll & Timekeeping Administration \n\n • Process payroll and ensure accuracy of employee time records.\n, • Train and support leaders on timekeeping systems and ensure timely approval of timecards.\n, • Monitor attendance, overtime, and related payroll reports for policy compliance.\n\n \n Compliance & Recordkeeping \n\n • Ensure compliance with employment laws and regulations, including proper Form I-9 completion and audits.\n, • Maintain HR compliance logs including OSHA records, attendance tracking, and corrective actions.\n, • Manage HR data systems and ensure accurate recordkeeping and reporting.\n\n \n Employee Relations \n\n • Serve as a trusted advisor to employees and management regarding HR policies and workplace issues.\n, • Coach supervisors on performance management, disciplinary actions, and employee development.\n, • Support resolution of employee relations issues in a professional and confidential manner.\n\n \n Training & Development \n\n • Coordinate and support training programs, including new hire training and ongoing development initiatives.\n, • Identify training needs in partnership with leadership and support workforce development efforts.\n, • Track and maintain training records and compliance documentation.\n\n \n Benefits Administration \n\n • Assist employees with benefits enrollment and eligibility for medical, dental, vision, and retirement plans.\n, • Support open enrollment processes and resolve benefit-related issues with vendors.\n, • Verify billing accuracy and coordinate submissions for payment processing.\n\n \n Safety & Workers' Compensation Support \n\n • Partner with Safety leadership on incident investigations and reporting.\n, • Coordinate care for workplace injuries and assist with workers’ compensation processes.\n\n \n Unemployment & Employment Administration \n\n • Manage unemployment claims and respond to agency requests.\n, • Prepare documentation and represent the company in unemployment hearings as needed.\n\n \n Employee Engagement & Culture \n\n • Support engagement initiatives including recognition programs, events, and employee communications.\n, • Partner with leadership to enhance workplace culture and positive employee experience.\n\n \n Reporting & Data Analysis \n\n • Track and analyze recruiting metrics (time-to-fill, turnover, applicant flow) and HR data.\n, • Prepare reports to support workforce planning and business decisions.\n\n \n Additional Responsibilities \n\n • Ensure adherence to all company policies and procedures.\n, • Perform other duties as assigned to support HR and recruiting functions.\n\n \n CORE COMPETENCIES \n\n • Talent Acquisition & Sourcing Strategy\n, • Communication\n, • Problem Solving & Analytical Thinking\n, • Organization & Planning\n, • Time Management\n, • Attention to Detail\n, • Service Leadership\n, • Integrity & Confidentiality\n\n \n MINIMUM QUALIFICATIONS \n Education and Experience \n\n • High School Diploma or GED required.\n, • Associate’s or Bachelor’s degree in Human Resources, Business Administration, or related field preferred.\n, • Minimum of three (3) years of Human Resources experience required.\n, • Minimum of two (2) years of full-cycle recruiting experience strongly preferred.\n, • Experience in manufacturing or high-volume hiring environments preferred.\n, • Bilingual in English and Spanish required.\n\n \n Knowledge, Skills, and Abilities \n\n • Strong recruiting and interviewing skills with the ability to assess candidate fit.\n, • Knowledge of employment laws and HR best practices.\n, • Proficiency with Microsoft Office (Word, Excel, Outlook, PowerPoint).\n, • Experience with ADP TotalSource or similar HRIS/ATS systems preferred.\n, • Ability to manage multiple requisitions and priorities in a fast-paced environment.\n, • Strong interpersonal and communication skills.\n, • Ability to maintain confidentiality and handle sensitive information.\n, • Detail-oriented with strong organizational and analytical skills.\n, • Ability to work independently and exercise sound judgment.\n\n \n WORK ENVIRONMENT \n\n • Office environment within a manufacturing facility.\n, • Exposure to plant conditions including temperature variations and machinery when supporting operations.\n\n \n PHYSICAL REQUIREMENTS \n\n • Ability to sit, stand, and walk for extended periods in both an office and manufacturing environment.\n, • Occasional lifting up to 25 pounds.\n, • Frequent computer and administrative work.\n, • Ability to bend, reach, kneel, or stoop as needed.\n

ON.energy is building the power infrastructure that makes the AI era possible. As AI demand surges past what the grid and traditional data centers can support, ON.energy provides a new class of power technology proven at gigawatt scale and trusted by the world’s leading cloud and AI companies. Our systems are already deployed across 2.5 GW of hyper-scale campuses, validated by top U.S. national labs, and certified for grid-safe operation by major utilities. With real products in the field, we’re scaling faster than the grid can, transforming power from a bottleneck into a competitive advantage for the companies building the future. \n Location: Site based in United States (Amarillo, TX initially), 80% plus travel \n Compensation: Hourly with overtime eligibility and per diem About the Position\n The Technician I will support field activities related to the installation, testing, and commissioning of electrical and battery energy storage systems. This role emphasizes a strong culture of safety and continuous learning, working closely with senior technicians and engineers to ensure high-quality project execution. Key Responsibilities\n\n • \n Uphold a strong safety culture by following all Job Hazard Analysis (JHA), Lockout/Tagout (LOTO), and related safety procedures, maintaining zero recordable injuries. \n • \n Perform basic installation verification tasks, including cable terminations, grounding checks, insulation testing, and equipment inspections. \n • \n Assist with battery and component testing, balance-of-plant (BOP) verifications, auxiliary system testing, and general on-site labor. \n • \n Support senior technicians and engineers throughout commissioning procedures and system start-up activities. \n • \n Ensure all tools, test equipment, and materials are available, properly maintained, and in safe working condition. \n • \n Accurately document and report any field issues, observations, or irregularities to senior technicians and engineering staff. \n • \n Follow direction from senior team members while actively developing technical skills to advance into more senior technician roles. \nRequirements\n\n • \n Foundational knowledge of electrical and mechanical systems. \n • \n Ability to read and interpret wiring diagrams, schematics, and technical documentation. \n • \n Completion of a technical certificate program, apprenticeship, or equivalent hands-on experience in electrical systems. \n • \n Strong willingness to learn, take direction, and adhere to established safety protocols. \n • \n Preferred safety certifications: OSHA 10, NFPA 70E, First Aid, CPR, and AED. \n\n For US-based roles - What you’ll get: \n\n • Competitive salary + annual performance-based bonus eligibility\n, • Medical, dental, and vision insurance\n, • 401(k) with company match\n, • Paid time off and company holidays \n\n For Mexico-based roles - What you’ll get: \n\n • Competitive salary + annual performance bonus eligibility\n, • Christmas Bonus (Aguinaldo): 30 days\n, • Major medical expenses and life insurance\n, • Paid time off and holidays (per local policy)\n\n For all roles: \n\n • Professional development and growth opportunities\n, • Opportunity to grow with a mission-driven team shaping the future of clean energy\n, • Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation.\n, • Accommodations: If you need an accommodation during the application process, email recruitment@onenergystorage.com\n, • Benefits vary by role and location and are subject to change.\n

Job DescriptionBenefits: • Employee discounts, • Paid time off Company Overview At Tire Pros we value each employee and encourage growth. We provide a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Start your exciting new career with a strong and stable company. Benefits and Perks • Excellent Training and Development, • Competitive Compensation, • Friendly Work Environment, • Top Tier BenefitsJob Summary Performs all automotive tire repairs, changes, balancing, rotations and TPMS procedures. Great growth and career opportunities. Responsibilities • Reviews repair order requests and makes visual inspection of vehicles to determine the extent of tire service requirements and materials needed, • Performs tire replacement or minor maintenance services, • Installs valve stem and tire-pressure monitoring system (TPMS) as required. Mounts tire on wheel assembly and inflates tires as required, • Test tire balances to ensure proper weight placement, • Performs short road test to ensure proper installation, • Reviews service with customer, • Complies with Company Quality Control Program, Company Safety Policy, OSHA and EPA regulations Desired Qualifications • High school graduate, comparable vocational training or 6 months of tire technician experience, • Must have knowledge of non-technical tire and auto service processes and procedures. Knowledge of systems software pertaining to automotive servicing, • Preferred Experience:, • Familiarity with tire and lube requirements and specifications, • Knowledge of Mitchell Repair and All-Data, • Knowledge of tire requirements to include use of wheel balancers, tire specifications, Tire Pressure Monitoring Systems and some drivability diagnostic experience, • Certifications:, • SEMA certification preferred, • Prefer TIA Automotive Tire Service (ATS) 200. Level 300 or 400 level a plus

Job DescriptionDescription: Site Leadership & Project Execution • Manage day-to-day field operations on assigned projects., • Supervise field personnel, subcontractors, and equipment operators., • Coordinate work activities to ensure project milestones and schedules are met., • Ensure work is performed in accordance with project plans, specifications, and company standards., • Lead daily site meetings and communicate work plans to crews. Safety Management • Enforce all company safety policies and OSHA regulations on-site., • Conduct daily safety briefings and job safety analyses (JSAs)., • Identify and mitigate potential hazards before work begins., • Ensure proper use of personal protective equipment (PPE)., • Immediately address and report any safety incidents or concerns. Scheduling & Resource Coordination • Plan and coordinate labor, equipment, and material requirements for project phases., • Work with the Project Manager to maintain project schedules and sequencing., • Monitor productivity and adjust resources as needed to meet deadlines., • Coordinate deliveries, subcontractor work, and equipment mobilization. Quality Control • Ensure work meets project specifications, engineering requirements, and company quality standards., • Conduct field inspections and verify work completion before advancing project phases., • Address field issues or conflicts related to drawings or scope of work. Communication & Reporting • Serve as the primary on-site contact for project management and leadership., • Maintain daily reports documenting labor, equipment, production, and site conditions., • Communicate project progress, challenges, and resource needs to the Project Manager., • Assist with documenting change orders and field adjustments. Equipment & Site Management • Ensure proper use and maintenance of equipment on-site., • Maintain organized, safe job sites including material staging and access control., • Support equipment mobilization, demobilization, and logistics planning. Requirements:

Join Waste Connections as a Diesel Mechanic and keep our fleet running strong! Amarillo, TX United States of America We’re hiring experienced techs to perform maintenance and repairs on garbage trucks—covering everything from hydraulics and electrical to engine systems. This is a hands-on, outdoor role for someone who takes pride in their work and values safety. Join Our Team -CULTURE: It’s a Great place to work! We work in an environment where empowered, self-directed all-stars know what they do is important. INTEGRITY: Our definition is “saying what you will do and then doing it!” We keep our promises to our customers and our employees. RESPECT: We show respect for our customers and fellow employees. Respect for ourselves grows through all the hard work and great service we provide to the communities we are privileged to serve. Click to view _ of our Mechanics. 🛠️ What You’ll Do: Repairs include but are not limited to, routine maintenance and repairing engines chassis and body components, hydraulic cylinders, brake systems, suspension systems, cooling systems, wheels and tires. Inspects equipment and/or trucks for condition, operations, parts and fluid levels, differentials, final drives, pump drives, and hubs. Knowledge of Hydraulics repair is required Utilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs. Conducts safety checks on vehicles and equipment. Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times. Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports. Performs maintenance related work as required. Maintains a clean, safe work area in compliance with corporate and OSHA standards. Performs required safety protocols while working on vehicles. Ability to effectively communicate needed repairs or tasks. Extensive physical activity. Requires strenuous physical work; heavy lifting, pushing, or pulling required of objects over 50 pounds. Work environment may be indoors in a shop, or outdoors to repair trucks on the road. Usually well-lighted and ventilated. Sometimes necessary to work in awkward or tight positions and to handle greasy or dirty tools. These factors require following basic safety precautions. ✅ Requirements: Minimum of 2+ years’ experience, that is directly related to the duties and responsibilities specified above. Must provide own personal tools. Welding/fabrication experience is a huge plus! ASE Certifications Preferred, but not required 💰 What We Offer: • 30/hr or more based on experience, • Monthly tool allowance + annual boot stipend, • Full benefits (Medical, Dental, Vision, 401K match, Life Insurance), • Consistent hours: 50–60 hrs. /week, 9:00am – 8:00pm., • Year-round stability + safety-first culture #ACBoost Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

Would you like to see a different part of your city every day from a bird’s eye view? Our Lamar office in Amarillo, Texas is now hiring a new Operations crew member to help us bring outdoor advertising campaigns to life for brands in Amarillo, TX and surrounding areas. This job is action-packed, and we provide all the training and equipment to start your career in the outdoor advertising industry. The purpose of this position is to install and maintain billboards, including the installation of advertisements, maintenance of structures, and the upkeep of billboard cosmetics. This position most often works as part of an installation crew. Why Lamar? Want a career that takes you above the everyday? As part of Lamar’s billboard construction and operations crew, you’ll experience the city from a bird’s-eye view while building and maintaining the structures that keep communities informed. Join a team that values safety, teamwork, and adventure—every single day. _. Lamar is a certified Great Place to Work, with 88% of employees in agreement. Lamar Advertising has also been named as a “Best Company to Work For” in U.S. News & World Report’s annual ranking. • Learn more about us on our official _., • Check reviews and company updates on our _, • Learn more about our _ What you can expect from us: • A Monday-Friday 8a-5p work schedule, • An hourly range of $18 - 19 / hour, dependent on relevant experience and qualifications, • 120 hours of paid time off (PTO) that increases with tenure, • 12 paid company holidays, including President's Day and Juneteenth, • A comprehensive 6-week training program, • Career advancement opportunities, • Ongoing professional development and internal leadership programs to maximize your career potential, • Multiple medical plan options and health savings account, • Hospital, Critical Illness, and Accident coverage, • Short & long-term disability and paid parental leave, • Employee Stock Purchase Plan, • 401k plan with company match, • Up to $1,200 value in employer-paid HSA contributions and cash rewards for engaging in our wellness program, • A people-first culture that invests in connection, community involvement, and transparency around employee feedback What we are looking for in YOU: • Good communication skills. Ability to speak and read English fluently, • Must be willing to work and get along well with others, • Basic computer skills including Internet navigation and Microsoft Word & Excel, • Ability to comply with Lamar safety standards while performing work, • Ability to work from ladders and to carry a ladder and/or other tools to the worksite from vehicle, • Working knowledge of electrical skills and techniques, • Working knowledge of fabrication skills and techniques, • Skill in reading technical documents, such as blueprints and diagrams, • General knowledge of Lamar, Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) safety regulations, • Ability to safely use construction equipment, in regards to the construction and maintenance of outdoor structures, • Ability to climb heights and work at heights above ground safely, • Ability to document installations, through photographs and written logs, • Skill in the practical applications of mathematics, in relation to construction and operations tasks, • Skill in setting priorities which accurately reflect the relative importance of job responsibilities Education and experience: • A high school diploma or equivalent is required, • A valid driver’s license is required, • Ability to complete OSHA 10-hour Construction course required, • Preferred certifications, depending on location need: CDL/Non-CDL, Crane, Signal, Rigging, or LDD, • Previous experience working at heights up to 200 ft. above ground preferred, • Or some equivalent combination of education and experience Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email _. A day in the life: Installing and maintaining all Billboards • Installing and maintaining all Billboards, • Remove and hang flexes, remove and hang vinyl’s, cut and prepare flexes and vinyl’s for installation, cut, prepare and install copy on Tri-Visions, • Maintain structures-repairs include but not limited to: tightening bolts, painting steel structures, repairing trim and various parts of the sign face and structure, change light bulbs as needed, paint structures, assemble structures and faces when required., • Building and installing extensions, cutting brush/weeds, conduct storm damage repairs, minor electrical repairs, and sweeping/cleaning workshop area., • Use power/manual tools, must adhere to all safety regulations., • Attend safety meetings as required., • Maintain operation vehicles; maintain tools, equipment and machinery., • Responsible for taking completion photos for proof of performance. Physical Demands and Work Environment: • The primary work environment for this position is outdoors, requiring the ability to work in adverse weather conditions and climb to heights up to 200 ft., • The physical demands for this position include heavy lifting (up to 100 pounds), extensive bending, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, driving, and climbing, • Nights spent away from home traveling are less than 10%, • On-call shifts may be required Who we are: Founded in 1902, Lamar Advertising Company is one of the largest outdoor advertising companies in the world. With over 360,000 displays across the United States and Canada, Lamar is dedicated to helping both local businesses and national brands reach broad audiences every day. We provide ad space through: • Billboards, • Interstate logos, • Handpainted murals, • Transportation and airports, • The largest network of digital billboards in the United States We live by the Golden Rule, and we operate with honesty and integrity in every aspect of our business. We are open with our employees, transparent with our customers, and loyal to the communities in which we serve. While Lamar is a large company, each office has its own culture and family atmosphere, making employees feel connected both locally and nationally. We are committed to sustainable and environmentally friendly business practices and use a number of innovative strategies to reduce our environmental impact. Please _ to learn more about Lamar's green initiatives. Lamar is an EEO/AA employer including Individuals with Disabilities, Protected Veterans, and any other State or Federally protected characteristic. Please note: Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment. SMS and Email Communications: By providing your contact information and submitting this form, you agree to receive email and SMS communications from Lamar Advertising Company regarding job opportunities, hiring events, and career-related updates. Message and data rates may apply. You can opt out at any time by emailing or replying 'STOP' to text messages. Your information will be processed in accordance with our . Disability Self-Identification: When applying for a job with Lamar, you will be asked to voluntarily self-identify whether you have a disability. Please take a moment to watch_ for clarification on why we're asking for this information! California Resident Disclaimer: California Residents - Lamar collects personal information in the ordinary course of considering job applicants. This information may include, for example, name, address, phone number and other contact information, employment history and reference contact information, and any other information provided by an applicant to Lamar. By submitting an application, you consent to the use or sharing of this personal information solely for the purpose of consideration for employment by Lamar. Lamar will not sell this information. #CoreOps Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Would you like to see a different part of your city every day from a bird’s eye view? Our Lamar office in Amarillo, Texas is now hiring a new Operations crew member to help us bring outdoor advertising campaigns to life for brands in Amarillo, TX and surrounding areas. This job is action-packed, and we provide all the training and equipment to start your career in the outdoor advertising industry. The purpose of this position is to install and maintain billboards, including the installation of advertisements, maintenance of structures, and the upkeep of billboard cosmetics. This position most often works as part of an installation crew. Why Lamar? Want a career that takes you above the everyday? As part of Lamar’s billboard construction and operations crew, you’ll experience the city from a bird’s-eye view while building and maintaining the structures that keep communities informed. Join a team that values safety, teamwork, and adventure—every single day. _. Lamar is a certified Great Place to Work, with 88% of employees in agreement. Lamar Advertising has also been named as a “Best Company to Work For” in U.S. News & World Report’s annual ranking. • Learn more about us on our official _., • Check reviews and company updates on our _, • Learn more about our _ What you can expect from us: • A Monday-Friday 8a-5p work schedule, • An hourly range of $18 - 19 / hour, dependent on relevant experience and qualifications, • 120 hours of paid time off (PTO) that increases with tenure, • 12 paid company holidays, including President's Day and Juneteenth, • A comprehensive 6-week training program, • Career advancement opportunities, • Ongoing professional development and internal leadership programs to maximize your career potential, • Multiple medical plan options and health savings account, • Hospital, Critical Illness, and Accident coverage, • Short & long-term disability and paid parental leave, • Employee Stock Purchase Plan, • 401k plan with company match, • Up to $1,200 value in employer-paid HSA contributions and cash rewards for engaging in our wellness program, • A people-first culture that invests in connection, community involvement, and transparency around employee feedback What we are looking for in YOU: • Good communication skills. Ability to speak and read English fluently, • Must be willing to work and get along well with others, • Basic computer skills including Internet navigation and Microsoft Word & Excel, • Ability to comply with Lamar safety standards while performing work, • Ability to work from ladders and to carry a ladder and/or other tools to the worksite from vehicle, • Working knowledge of electrical skills and techniques, • Working knowledge of fabrication skills and techniques, • Skill in reading technical documents, such as blueprints and diagrams, • General knowledge of Lamar, Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) safety regulations, • Ability to safely use construction equipment, in regards to the construction and maintenance of outdoor structures, • Ability to climb heights and work at heights above ground safely, • Ability to document installations, through photographs and written logs, • Skill in the practical applications of mathematics, in relation to construction and operations tasks, • Skill in setting priorities which accurately reflect the relative importance of job responsibilities Education and experience: • A high school diploma or equivalent is required, • A valid driver’s license is required, • Ability to complete OSHA 10-hour Construction course required, • Preferred certifications, depending on location need: CDL/Non-CDL, Crane, Signal, Rigging, or LDD, • Previous experience working at heights up to 200 ft. above ground preferred, • Or some equivalent combination of education and experience Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email _. A day in the life: Installing and maintaining all Billboards • Installing and maintaining all Billboards, • Remove and hang flexes, remove and hang vinyl’s, cut and prepare flexes and vinyl’s for installation, cut, prepare and install copy on Tri-Visions, • Maintain structures-repairs include but not limited to: tightening bolts, painting steel structures, repairing trim and various parts of the sign face and structure, change light bulbs as needed, paint structures, assemble structures and faces when required., • Building and installing extensions, cutting brush/weeds, conduct storm damage repairs, minor electrical repairs, and sweeping/cleaning workshop area., • Use power/manual tools, must adhere to all safety regulations., • Attend safety meetings as required., • Maintain operation vehicles; maintain tools, equipment and machinery., • Responsible for taking completion photos for proof of performance. Physical Demands and Work Environment: • The primary work environment for this position is outdoors, requiring the ability to work in adverse weather conditions and climb to heights up to 200 ft., • The physical demands for this position include heavy lifting (up to 100 pounds), extensive bending, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, driving, and climbing, • Nights spent away from home traveling are less than 10%, • On-call shifts may be required Who we are: Founded in 1902, Lamar Advertising Company is one of the largest outdoor advertising companies in the world. With over 360,000 displays across the United States and Canada, Lamar is dedicated to helping both local businesses and national brands reach broad audiences every day. We provide ad space through: • Billboards, • Interstate logos, • Handpainted murals, • Transportation and airports, • The largest network of digital billboards in the United States We live by the Golden Rule, and we operate with honesty and integrity in every aspect of our business. We are open with our employees, transparent with our customers, and loyal to the communities in which we serve. While Lamar is a large company, each office has its own culture and family atmosphere, making employees feel connected both locally and nationally. We are committed to sustainable and environmentally friendly business practices and use a number of innovative strategies to reduce our environmental impact. Please _ to learn more about Lamar's green initiatives. Lamar is an EEO/AA employer including Individuals with Disabilities, Protected Veterans, and any other State or Federally protected characteristic. Please note: Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment. SMS and Email Communications: By providing your contact information and submitting this form, you agree to receive email and SMS communications from Lamar Advertising Company regarding job opportunities, hiring events, and career-related updates. Message and data rates may apply. You can opt out at any time by emailing or replying 'STOP' to text messages. Your information will be processed in accordance with our . Disability Self-Identification: When applying for a job with Lamar, you will be asked to voluntarily self-identify whether you have a disability. Please take a moment to watch_ for clarification on why we're asking for this information! California Resident Disclaimer: California Residents - Lamar collects personal information in the ordinary course of considering job applicants. This information may include, for example, name, address, phone number and other contact information, employment history and reference contact information, and any other information provided by an applicant to Lamar. By submitting an application, you consent to the use or sharing of this personal information solely for the purpose of consideration for employment by Lamar. Lamar will not sell this information. #CoreOps Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Would you like to see a different part of your city every day from a bird’s eye view? Our Lamar office in Amarillo, Texas is now hiring a new Operations crew member to help us bring outdoor advertising campaigns to life for brands in Amarillo, TX and surrounding areas. This job is action-packed, and we provide all the training and equipment to start your career in the outdoor advertising industry. The purpose of this position is to install and maintain billboards, including the installation of advertisements, maintenance of structures, and the upkeep of billboard cosmetics. This position most often works as part of an installation crew. Why Lamar? Want a career that takes you above the everyday? As part of Lamar’s billboard construction and operations crew, you’ll experience the city from a bird’s-eye view while building and maintaining the structures that keep communities informed. Join a team that values safety, teamwork, and adventure—every single day. _. Lamar is a certified Great Place to Work, with 88% of employees in agreement. Lamar Advertising has also been named as a “Best Company to Work For” in U.S. News & World Report’s annual ranking. • Learn more about us on our official _., • Check reviews and company updates on our _, • Learn more about our _ What you can expect from us: • A Monday-Friday 8a-5p work schedule, • An hourly range of $18 - 19 / hour, dependent on relevant experience and qualifications, • 120 hours of paid time off (PTO) that increases with tenure, • 12 paid company holidays, including President's Day and Juneteenth, • A comprehensive 6-week training program, • Career advancement opportunities, • Ongoing professional development and internal leadership programs to maximize your career potential, • Multiple medical plan options and health savings account, • Hospital, Critical Illness, and Accident coverage, • Short & long-term disability and paid parental leave, • Employee Stock Purchase Plan, • 401k plan with company match, • Up to $1,200 value in employer-paid HSA contributions and cash rewards for engaging in our wellness program, • A people-first culture that invests in connection, community involvement, and transparency around employee feedback What we are looking for in YOU: • Good communication skills. Ability to speak and read English fluently, • Must be willing to work and get along well with others, • Basic computer skills including Internet navigation and Microsoft Word & Excel, • Ability to comply with Lamar safety standards while performing work, • Ability to work from ladders and to carry a ladder and/or other tools to the worksite from vehicle, • Working knowledge of electrical skills and techniques, • Working knowledge of fabrication skills and techniques, • Skill in reading technical documents, such as blueprints and diagrams, • General knowledge of Lamar, Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) safety regulations, • Ability to safely use construction equipment, in regards to the construction and maintenance of outdoor structures, • Ability to climb heights and work at heights above ground safely, • Ability to document installations, through photographs and written logs, • Skill in the practical applications of mathematics, in relation to construction and operations tasks, • Skill in setting priorities which accurately reflect the relative importance of job responsibilities Education and experience: • A high school diploma or equivalent is required, • A valid driver’s license is required, • Ability to complete OSHA 10-hour Construction course required, • Preferred certifications, depending on location need: CDL/Non-CDL, Crane, Signal, Rigging, or LDD, • Previous experience working at heights up to 200 ft. above ground preferred, • Or some equivalent combination of education and experience Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email _. A day in the life: Installing and maintaining all Billboards • Installing and maintaining all Billboards, • Remove and hang flexes, remove and hang vinyl’s, cut and prepare flexes and vinyl’s for installation, cut, prepare and install copy on Tri-Visions, • Maintain structures-repairs include but not limited to: tightening bolts, painting steel structures, repairing trim and various parts of the sign face and structure, change light bulbs as needed, paint structures, assemble structures and faces when required., • Building and installing extensions, cutting brush/weeds, conduct storm damage repairs, minor electrical repairs, and sweeping/cleaning workshop area., • Use power/manual tools, must adhere to all safety regulations., • Attend safety meetings as required., • Maintain operation vehicles; maintain tools, equipment and machinery., • Responsible for taking completion photos for proof of performance. Physical Demands and Work Environment: • The primary work environment for this position is outdoors, requiring the ability to work in adverse weather conditions and climb to heights up to 200 ft., • The physical demands for this position include heavy lifting (up to 100 pounds), extensive bending, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, driving, and climbing, • Nights spent away from home traveling are less than 10%, • On-call shifts may be required Who we are: Founded in 1902, Lamar Advertising Company is one of the largest outdoor advertising companies in the world. With over 360,000 displays across the United States and Canada, Lamar is dedicated to helping both local businesses and national brands reach broad audiences every day. We provide ad space through: • Billboards, • Interstate logos, • Handpainted murals, • Transportation and airports, • The largest network of digital billboards in the United States We live by the Golden Rule, and we operate with honesty and integrity in every aspect of our business. We are open with our employees, transparent with our customers, and loyal to the communities in which we serve. While Lamar is a large company, each office has its own culture and family atmosphere, making employees feel connected both locally and nationally. We are committed to sustainable and environmentally friendly business practices and use a number of innovative strategies to reduce our environmental impact. Please _ to learn more about Lamar's green initiatives. Lamar is an EEO/AA employer including Individuals with Disabilities, Protected Veterans, and any other State or Federally protected characteristic. Please note: Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment. SMS and Email Communications: By providing your contact information and submitting this form, you agree to receive email and SMS communications from Lamar Advertising Company regarding job opportunities, hiring events, and career-related updates. Message and data rates may apply. You can opt out at any time by emailing or replying 'STOP' to text messages. Your information will be processed in accordance with our . Disability Self-Identification: When applying for a job with Lamar, you will be asked to voluntarily self-identify whether you have a disability. Please take a moment to watch_ for clarification on why we're asking for this information! California Resident Disclaimer: California Residents - Lamar collects personal information in the ordinary course of considering job applicants. This information may include, for example, name, address, phone number and other contact information, employment history and reference contact information, and any other information provided by an applicant to Lamar. By submitting an application, you consent to the use or sharing of this personal information solely for the purpose of consideration for employment by Lamar. Lamar will not sell this information. #CoreOps Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description SUMMARY: The Operations Manager provides direct leadership to production and sanitation teams and works cross-functionally to align operations with broader site and supply chain objectives. This role requires a hands-on leader with strong manufacturing expertise, proven ability to improve plant performance and a track record of developing teams in a fast paced environment. KEY RESPONSIBILITIES: Operational Leadership & Performance Management KPIs • Lead daily manufacturing operations across cheese and cream production, ensuring attainment of production targets and service levels, • Serve as acting site leader in the absence of the Site Director, ensuring continuity of operations and decision-making, • Drive execution discipline across production planning, scheduling, and line performance, • Ensure adherence to standard operating procedures (SOPs) and manufacturing best practices, • Own and drive key operational metrics including; Quality and food safety compliance; Yield and waste reduction; Labor productivity; Conversion cost performance; Safety metrics (OSHA, incident rates), • Monitor performance daily and implement corrective actions to address gaps., • Lead root cause analysis and problem-solving to improve plant performance and reduce variability., • Champion a “Safety First” culture and ensure compliance with OSHA and company safety standards, • Ensure all food safety and quality programs (GMPs, HACCP, SQF) are followed and embedded in daily operations People Leadership & Cross-Functional Collaboration • Lead and develop a team to include Production Managers, Clean in Place (CIP) Sanitation Manager, • Build a high-performing, accountable culture focused on safety, quality, and results., • Drive talent development, training, and succession planning within operations., • Ensure appropriate staffing, performance management, and employee engagement., • Partner closely with all departments within Cacique Foods, • Ensure alignment on production plans, material availability, and finished goods flow, • Collaborate to resolve operational issues and improve end-to-end performance Continuous Improvement & Cost Optimization • Drive Lean manufacturing and continuous improvement initiatives to enhance efficiency and reduce waste, • Identify and execute initiatives to improve throughput, reduce downtime, and optimize labor utilization, • Support delivery of plant financial targets, including conversion cost and cost of goods sold (COGS) performance QUALIFICATIONS & EXPERIENCE • Bachelor’s degree in operations, Engineering, Food Science, or related field (or equivalent experience), • Minimum eight (8–12) twelve years of manufacturing experience, preferably in dairy or food production, • Minimum five 5+ years of leadership experience in plant operations or production management, • Strong knowledge of dairy manufacturing processes (cheese and/or cream preferred), • Demonstrated success driving operational KPIs (quality, yield, cost, safety), • Experience with Lean, Six Sigma, or continuous improvement methodologies, • Strong financial and operational acumen, including cost management and productivity improvement, • Proven ability to lead in a fast-paced, hands-on manufacturing environment, • Operational execution & accountability; leadership & team development; problem solving & root cause analysis, • Agile, dynamic and forward thinking PHYSICAL DEMANDS & WORK ENVIORNMENT: Required to maneuver plant and warehouse workspaces which involve: • Frequently standing, walking, sitting, talking, or hearing, work around loud machinery and moving parts, • Continually utilize hand and finger dexterity, continually exposed to extreme heat, extreme cold, wet and/or humid conditions (non-weather), • Occasionally required to climb, balance, bend, stoop, exposed to outside weather conditions, and push, pull, and lift up to 50 pounds safely The above is intended to describe the general content and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Would you like to see a different part of your city every day from a bird’s eye view? Our Lamar office in Amarillo, Texas is now hiring a new Operations crew member to help us bring outdoor advertising campaigns to life for brands in Amarillo, TX and surrounding areas. This job is action-packed, and we provide all the training and equipment to start your career in the outdoor advertising industry. The purpose of this position is to install and maintain billboards, including the installation of advertisements, maintenance of structures, and the upkeep of billboard cosmetics. This position most often works as part of an installation crew. Why Lamar? Want a career that takes you above the everyday? As part of Lamar’s billboard construction and operations crew, you’ll experience the city from a bird’s-eye view while building and maintaining the structures that keep communities informed. Join a team that values safety, teamwork, and adventure—every single day. _. Lamar is a certified Great Place to Work, with 88% of employees in agreement. Lamar Advertising has also been named as a “Best Company to Work For” in U.S. News & World Report’s annual ranking. • Learn more about us on our official _., • Check reviews and company updates on our _, • Learn more about our _ What you can expect from us: • A Monday-Friday 8a-5p work schedule, • An hourly range of $18 - 19 / hour, dependent on relevant experience and qualifications, • 120 hours of paid time off (PTO) that increases with tenure, • 12 paid company holidays, including President's Day and Juneteenth, • A comprehensive 6-week training program, • Career advancement opportunities, • Ongoing professional development and internal leadership programs to maximize your career potential, • Multiple medical plan options and health savings account, • Hospital, Critical Illness, and Accident coverage, • Short & long-term disability and paid parental leave, • Employee Stock Purchase Plan, • 401k plan with company match, • Up to $1,200 value in employer-paid HSA contributions and cash rewards for engaging in our wellness program, • A people-first culture that invests in connection, community involvement, and transparency around employee feedback What we are looking for in YOU: • Good communication skills. Ability to speak and read English fluently, • Must be willing to work and get along well with others, • Basic computer skills including Internet navigation and Microsoft Word & Excel, • Ability to comply with Lamar safety standards while performing work, • Ability to work from ladders and to carry a ladder and/or other tools to the worksite from vehicle, • Working knowledge of electrical skills and techniques, • Working knowledge of fabrication skills and techniques, • Skill in reading technical documents, such as blueprints and diagrams, • General knowledge of Lamar, Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) safety regulations, • Ability to safely use construction equipment, in regards to the construction and maintenance of outdoor structures, • Ability to climb heights and work at heights above ground safely, • Ability to document installations, through photographs and written logs, • Skill in the practical applications of mathematics, in relation to construction and operations tasks, • Skill in setting priorities which accurately reflect the relative importance of job responsibilities Education and experience: • A high school diploma or equivalent is required, • A valid driver’s license is required, • Ability to complete OSHA 10-hour Construction course required, • Preferred certifications, depending on location need: CDL/Non-CDL, Crane, Signal, Rigging, or LDD, • Previous experience working at heights up to 200 ft. above ground preferred, • Or some equivalent combination of education and experience Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email _. A day in the life: Installing and maintaining all Billboards • Installing and maintaining all Billboards, • Remove and hang flexes, remove and hang vinyl’s, cut and prepare flexes and vinyl’s for installation, cut, prepare and install copy on Tri-Visions, • Maintain structures-repairs include but not limited to: tightening bolts, painting steel structures, repairing trim and various parts of the sign face and structure, change light bulbs as needed, paint structures, assemble structures and faces when required., • Building and installing extensions, cutting brush/weeds, conduct storm damage repairs, minor electrical repairs, and sweeping/cleaning workshop area., • Use power/manual tools, must adhere to all safety regulations., • Attend safety meetings as required., • Maintain operation vehicles; maintain tools, equipment and machinery., • Responsible for taking completion photos for proof of performance. Physical Demands and Work Environment: • The primary work environment for this position is outdoors, requiring the ability to work in adverse weather conditions and climb to heights up to 200 ft., • The physical demands for this position include heavy lifting (up to 100 pounds), extensive bending, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, driving, and climbing, • Nights spent away from home traveling are less than 10%, • On-call shifts may be required Who we are: Founded in 1902, Lamar Advertising Company is one of the largest outdoor advertising companies in the world. With over 360,000 displays across the United States and Canada, Lamar is dedicated to helping both local businesses and national brands reach broad audiences every day. We provide ad space through: • Billboards, • Interstate logos, • Handpainted murals, • Transportation and airports, • The largest network of digital billboards in the United States We live by the Golden Rule, and we operate with honesty and integrity in every aspect of our business. We are open with our employees, transparent with our customers, and loyal to the communities in which we serve. While Lamar is a large company, each office has its own culture and family atmosphere, making employees feel connected both locally and nationally. We are committed to sustainable and environmentally friendly business practices and use a number of innovative strategies to reduce our environmental impact. Please _ to learn more about Lamar's green initiatives. Lamar is an EEO/AA employer including Individuals with Disabilities, Protected Veterans, and any other State or Federally protected characteristic. Please note: Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment. SMS and Email Communications: By providing your contact information and submitting this form, you agree to receive email and SMS communications from Lamar Advertising Company regarding job opportunities, hiring events, and career-related updates. Message and data rates may apply. You can opt out at any time by emailing or replying 'STOP' to text messages. Your information will be processed in accordance with our . Disability Self-Identification: When applying for a job with Lamar, you will be asked to voluntarily self-identify whether you have a disability. Please take a moment to watch_ for clarification on why we're asking for this information! California Resident Disclaimer: California Residents - Lamar collects personal information in the ordinary course of considering job applicants. This information may include, for example, name, address, phone number and other contact information, employment history and reference contact information, and any other information provided by an applicant to Lamar. By submitting an application, you consent to the use or sharing of this personal information solely for the purpose of consideration for employment by Lamar. Lamar will not sell this information. #CoreOps Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Would you like to see a different part of your city every day from a bird’s eye view? Our Lamar office in Amarillo, Texas is now hiring a new Operations crew member to help us bring outdoor advertising campaigns to life for brands in Amarillo, TX and surrounding areas. This job is action-packed, and we provide all the training and equipment to start your career in the outdoor advertising industry. The purpose of this position is to install and maintain billboards, including the installation of advertisements, maintenance of structures, and the upkeep of billboard cosmetics. This position most often works as part of an installation crew. Why Lamar? Want a career that takes you above the everyday? As part of Lamar’s billboard construction and operations crew, you’ll experience the city from a bird’s-eye view while building and maintaining the structures that keep communities informed. Join a team that values safety, teamwork, and adventure—every single day. _. Lamar is a certified Great Place to Work, with 88% of employees in agreement. Lamar Advertising has also been named as a “Best Company to Work For” in U.S. News & World Report’s annual ranking. • Learn more about us on our official _., • Check reviews and company updates on our _, • Learn more about our _ What you can expect from us: • A Monday-Friday 8a-5p work schedule, • An hourly range of $18 - 19 / hour, dependent on relevant experience and qualifications, • 120 hours of paid time off (PTO) that increases with tenure, • 12 paid company holidays, including President's Day and Juneteenth, • A comprehensive 6-week training program, • Career advancement opportunities, • Ongoing professional development and internal leadership programs to maximize your career potential, • Multiple medical plan options and health savings account, • Hospital, Critical Illness, and Accident coverage, • Short & long-term disability and paid parental leave, • Employee Stock Purchase Plan, • 401k plan with company match, • Up to $1,200 value in employer-paid HSA contributions and cash rewards for engaging in our wellness program, • A people-first culture that invests in connection, community involvement, and transparency around employee feedback What we are looking for in YOU: • Good communication skills. Ability to speak and read English fluently, • Must be willing to work and get along well with others, • Basic computer skills including Internet navigation and Microsoft Word & Excel, • Ability to comply with Lamar safety standards while performing work, • Ability to work from ladders and to carry a ladder and/or other tools to the worksite from vehicle, • Working knowledge of electrical skills and techniques, • Working knowledge of fabrication skills and techniques, • Skill in reading technical documents, such as blueprints and diagrams, • General knowledge of Lamar, Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) safety regulations, • Ability to safely use construction equipment, in regards to the construction and maintenance of outdoor structures, • Ability to climb heights and work at heights above ground safely, • Ability to document installations, through photographs and written logs, • Skill in the practical applications of mathematics, in relation to construction and operations tasks, • Skill in setting priorities which accurately reflect the relative importance of job responsibilities Education and experience: • A high school diploma or equivalent is required, • A valid driver’s license is required, • Ability to complete OSHA 10-hour Construction course required, • Preferred certifications, depending on location need: CDL/Non-CDL, Crane, Signal, Rigging, or LDD, • Previous experience working at heights up to 200 ft. above ground preferred, • Or some equivalent combination of education and experience Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email _. A day in the life: Installing and maintaining all Billboards • Installing and maintaining all Billboards, • Remove and hang flexes, remove and hang vinyl’s, cut and prepare flexes and vinyl’s for installation, cut, prepare and install copy on Tri-Visions, • Maintain structures-repairs include but not limited to: tightening bolts, painting steel structures, repairing trim and various parts of the sign face and structure, change light bulbs as needed, paint structures, assemble structures and faces when required., • Building and installing extensions, cutting brush/weeds, conduct storm damage repairs, minor electrical repairs, and sweeping/cleaning workshop area., • Use power/manual tools, must adhere to all safety regulations., • Attend safety meetings as required., • Maintain operation vehicles; maintain tools, equipment and machinery., • Responsible for taking completion photos for proof of performance. Physical Demands and Work Environment: • The primary work environment for this position is outdoors, requiring the ability to work in adverse weather conditions and climb to heights up to 200 ft., • The physical demands for this position include heavy lifting (up to 100 pounds), extensive bending, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, driving, and climbing, • Nights spent away from home traveling are less than 10%, • On-call shifts may be required Who we are: Founded in 1902, Lamar Advertising Company is one of the largest outdoor advertising companies in the world. With over 360,000 displays across the United States and Canada, Lamar is dedicated to helping both local businesses and national brands reach broad audiences every day. We provide ad space through: • Billboards, • Interstate logos, • Handpainted murals, • Transportation and airports, • The largest network of digital billboards in the United States We live by the Golden Rule, and we operate with honesty and integrity in every aspect of our business. We are open with our employees, transparent with our customers, and loyal to the communities in which we serve. While Lamar is a large company, each office has its own culture and family atmosphere, making employees feel connected both locally and nationally. We are committed to sustainable and environmentally friendly business practices and use a number of innovative strategies to reduce our environmental impact. Please _ to learn more about Lamar's green initiatives. Lamar is an EEO/AA employer including Individuals with Disabilities, Protected Veterans, and any other State or Federally protected characteristic. Please note: Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment. SMS and Email Communications: By providing your contact information and submitting this form, you agree to receive email and SMS communications from Lamar Advertising Company regarding job opportunities, hiring events, and career-related updates. Message and data rates may apply. You can opt out at any time by emailing or replying 'STOP' to text messages. Your information will be processed in accordance with our . Disability Self-Identification: When applying for a job with Lamar, you will be asked to voluntarily self-identify whether you have a disability. Please take a moment to watch_ for clarification on why we're asking for this information! California Resident Disclaimer: California Residents - Lamar collects personal information in the ordinary course of considering job applicants. This information may include, for example, name, address, phone number and other contact information, employment history and reference contact information, and any other information provided by an applicant to Lamar. By submitting an application, you consent to the use or sharing of this personal information solely for the purpose of consideration for employment by Lamar. Lamar will not sell this information. #CoreOps Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Build a strong Foundation both professionally and personally with a career at KFC! We’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the perfect place to learn, grow and succeed! We offer the following: • A commitment to promote from within, • Training and mentorship programs, • Tuition reimbursement and scholarship opportunities, • Reward and recognition culture, • Competitive Pay, • Flexible schedules- day, night and evening shifts, • Free meal each shift, • Eligibility to accrue paid vacation time, • Career advancement and professional development opportunities, • Medical benefits, • Health and Wellness programs, • 401K plan with 6% match, • PERKS! Discounts on mortgages, vehicles, cell phones, gym memberships and more, • KFC Foundation Programs include FREE college tuition at WGU, $1 per $1 Savings Match Program, Hardship Assistance Program plus more! The responsibilities of the team member will include: • Interaction with customers: receiving orders, processing sales and monies and managing customer issues., • Preparation of products., • Maintaining quality of product., • Monitoring all service equipment., • Uncompromising standards in maintaining a clean and safe work environment (per Labor Board and OSHA regulations and Company standards), Unloading, stocking and maintaining required inventory level., • Champions recognition and motivation efforts Requirements The ideal candidates must want to have fun serving great food to our customers! • Must be at least 16 years of age, • Accessibility to dependable and reliable transportation, • Excellent communication skills, management/leadership and organizational skills., • Physical dexterity required (the ability to move up to 50 lbs. from one area to another)., • Attendance and Punctuality a must, • Operating of cash register as needed and making change for other cashiers., • Basic Math skills, • Complete training certification, • Enthusiasm and willingness to learn, • Team player, • Commitment to customer satisfaction, • Strong work ethic

Job DescriptionWarehouse Operator – H & R FoodsPosition Summary H & R Foods, a division of PAK Quality Foods, is a trusted food distribution company serving restaurants and businesses throughout the Amarillo area. We are looking for dependable, hardworking team members to join our warehouse operations team. This role is responsible for receiving, storing, picking, and loading food products while ensuring accuracy, food safety compliance, and timely delivery to customers. Why Join Us • Competitive hourly pay with overtime opportunities., • Comprehensive benefits package, including medical, dental, vision, and life insurance., • Additional voluntary benefits to fit your needs., • Stable, year-round work in a supportive, team-oriented environment., • Strong focus on safety, training, and career growth.Key Responsibilities, • Receive incoming shipments using RF scanners, verify product quantities and quality against purchase orders., • Inspect goods for damage, spoilage, or temperature deviations and report discrepancies immediately., • Properly label and store all inventory following FIFO (First In, First Out) and company procedures., • Participate in periodic physical inventory counts and cycle counts., • Accurately pick and stage customer orders using RF scanners and pick tickets., • Ensure all products are packed, palletized, and wrapped securely for transport., • Load and unload trucks safely using pallet jacks, forklifts, or other approved equipment., • Collect and document payments in accordance with customer invoice terms and company policies., • Verify outgoing shipments meet customer specifications and documentation requirements., • Follow all company policies related to food handling, temperature control, and sanitation per FDA and USDA regulations., • Maintain a clean and organized work area at all times in compliance with GMP (Good Manufacturing Practices)., • Report any product contamination, pest activity, or safety hazards immediately to management., • Participate in required food safety, HACCP, and workplace safety training programs., • Operate material handling equipment safely and perform basic daily equipment inspections., • Adhere to OSHA and company safety standards, including use of personal protective equipment (PPE)., • Assist in maintaining warehouse temperature monitoring logs and corrective action documentation.Qualifications Education & Experience • High school diploma or GED required., • 1–3 years of warehouse, distribution, or logistics experience preferred., • Food distribution or cold storage experience highly desirable. Skills & Abilities • Ability to operate forklifts, pallet jacks, and other warehouse equipment (certification preferred)., • Strong attention to detail and accuracy in order picking and documentation., • Basic math and money counting skills., • Basic computer or RF scanner skills., • Excellent teamwork, communication, and problem-solving skills. Full-time position; may include Sundays and holidays based on business needs. Overtime may be required. Physical Requirements • Must be able to stand, walk, bend, and lift up to 100 lbs. regularly., • Ability to work in temperature-controlled environments (dry, refrigerated, and frozen areas)., • Frequent exposure to cold, noise, and warehouse equipment., • Must be able to operate manual and powered industrial equipment safely.Additional Information Employment is subject to passing a background check and pre-employment drug screening. Compliance with all food safety and OSHA standards is required. PAK Quality Foods is an Equal Opportunity Employer and complies with all applicable federal, state, and local employment laws. We value diversity and are committed to providing a safe and inclusive workplace for all employees.

Job DescriptionOperador de Almacén – H & R FoodsResumen del puesto H & R Foods, una división de PAK Quality Foods, es una compañía confiable de distribución de alimentos que sirve a restaurantes y negocios en el área de Amarillo. Estamos buscando miembros de equipo responsables y trabajadores para unirse a nuestro equipo de operaciones de almacén. Este puesto es responsable de recibir, almacenar, seleccionar y cargar productos alimenticios, asegurando precisión, cumplimiento con las normas de seguridad alimentaria y entregas puntuales a los clientes. Por qué unirte a nosotros • Pago competitivo por hora con oportunidades de tiempo extra., • Paquete completo de beneficios, incluyendo seguro médico, dental, de visión y de vida., • Beneficios voluntarios adicionales para adaptarse a tus necesidades., • Trabajo estable durante todo el año en un ambiente de apoyo y trabajo en equipo., • Fuerte enfoque en seguridad, capacitación y crecimiento profesional.Responsabilidades principales, • Recibir embarques entrantes usando escáneres RF y verificar las cantidades y calidad del producto contra las órdenes de compra., • Inspeccionar mercancía para detectar daños, deterioro o desviaciones de temperatura, y reportar cualquier discrepancia de inmediato., • Etiquetar y almacenar correctamente todo el inventario siguiendo FIFO, primero en entrar, primero en salir, y los procedimientos de la compañía., • Participar en conteos físicos de inventario y conteos cíclicos periódicos., • Seleccionar y preparar pedidos de clientes con precisión usando escáneres RF y hojas de selección., • Asegurar que todos los productos estén empacados, paletizados y envueltos de forma segura para su transporte., • Cargar y descargar camiones de manera segura usando patines hidráulicos, montacargas u otro equipo aprobado., • Cobrar y documentar pagos de acuerdo con los términos de la factura del cliente y las políticas de la compañía., • Verificar que los embarques salientes cumplan con las especificaciones del cliente y los requisitos de documentación., • Seguir todas las políticas de la compañía relacionadas con el manejo de alimentos, control de temperatura y sanidad conforme a las regulaciones de FDA y USDA., • Mantener el área de trabajo limpia y organizada en todo momento, cumpliendo con las GMP, Buenas Prácticas de Manufactura., • Reportar de inmediato a la gerencia cualquier contaminación de producto, actividad de plagas o peligro de seguridad., • Participar en las capacitaciones requeridas de seguridad alimentaria, HACCP y seguridad en el lugar de trabajo., • Operar equipo de manejo de materiales de manera segura y realizar inspecciones básicas diarias del equipo., • Cumplir con los estándares de seguridad de OSHA y de la compañía, incluyendo el uso de equipo de protección personal, PPE., • Ayudar a mantener registros de monitoreo de temperatura del almacén y documentación de acciones correctivas.Requisitos Educación y experiencia • Diploma de preparatoria o GED requerido., • Se prefiere 1 a 3 años de experiencia en almacén, distribución o logística., • Experiencia en distribución de alimentos o almacenamiento en frío es altamente deseable. Habilidades y capacidades • Capacidad para operar montacargas, patines hidráulicos y otro equipo de almacén; certificación preferida., • Gran atención al detalle y precisión en la selección de pedidos y documentación., • Habilidades básicas de matemáticas y conteo de dinero., • Habilidades básicas de computadora o uso de escáner RF., • Excelentes habilidades de trabajo en equipo, comunicación y resolución de problemas. Puesto de tiempo completo; puede incluir domingos y días festivos según las necesidades del negocio. Puede requerirse tiempo extra. Requisitos físicos • Debe poder estar de pie, caminar, agacharse y levantar hasta 100 libras regularmente., • Capacidad para trabajar en ambientes con temperatura controlada, incluyendo áreas secas, refrigeradas y congeladas., • Exposición frecuente al frío, ruido y equipo de almacén., • Debe poder operar equipo industrial manual y motorizado de manera segura.Información adicional El empleo está sujeto a aprobar una verificación de antecedentes y una prueba de drogas previa al empleo. Se requiere cumplir con todos los estándares de seguridad alimentaria y OSHA. PAK Quality Foods es un Empleador que Ofrece Igualdad de Oportunidades. Cumplimos con todas las leyes laborales federales, estatales y locales aplicables. Valoramos la diversidad y estamos comprometidos con ofrecer un lugar de trabajo seguro e inclusivo para todos los empleados.

Job Description Build a strong Foundation both professionally and personally with a career at Long John Silvers! We’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, Long John Silvers is the perfect place to learn, grow and succeed! We offer the following: • A commitment to promote from within, • Training and mentorship programs, • Tuition reimbursement and scholarship opportunities, • Reward and recognition culture, • Competitive Pay, • Flexible schedules- day, night and evening shifts, • Free meal each shift, • Eligibility to accrue paid vacation time, • Career advancement and professional development opportunities, • Medical benefits, • Health and Wellness programs, • 401K plan with 6% match, • PERKS! Discounts on mortgages, vehicles, cell phones, gym memberships and more The responsibilities of the team member will include: • Interaction with customers: receiving orders, processing sales and monies and managing customer issues., • Preparation of products., • Maintaining quality of product., • Monitoring all service equipment., • Uncompromising standards in maintaining a clean and safe work environment (per Labor Board and OSHA regulations and Company standards), Unloading, stocking and maintaining required inventory level., • Champions recognition and motivation efforts Requirements The ideal candidates must want to have fun serving great food to our customers! • Must be at least 16 years of age, • Accessibility to dependable and reliable transportation, • Excellent communication skills, management/leadership and organizational skills., • Physical dexterity required (the ability to move up to 50 lbs. from one area to another)., • Attendance and Punctuality a must, • Operating of cash register as needed and making change for other cashiers., • Basic Math skills, • Complete training certification, • Enthusiasm and willingness to learn, • Team player, • Commitment to customer satisfaction, • Strong work ethic

Job Description Journeyman Plumber – Lead Commercial and Industrial Mechanical Installations Job Overview • Company: Howards Mechanical Inc., • Salary/Pay Rate: $35 to $40 per hour (Based on experience) plus Performance Based Bonus., • Location: Amarillo, TX (10% Travel Required)., • Job/Employment Type: Full Time., • Project Scope: Commercial, Industrial, Government, and Federal., • Mandatory Licenses & Certifications: State of Texas Licensed Plumber. The Opportunity You will serve as a critical technical expert, driving the successful execution of large-scale commercial, industrial, and federal plumbing systems. This role allows you to showcase your advanced mechanical skills while executing high-quality installations for a family-owned company that truly values your long-term career growth. You will enjoy the autonomy of managing field operations on site, backed by a dedicated leadership team. How You Will Make an Impact • Execute complex commercial and industrial plumbing installations in strict accordance with blueprints and local codes., • Manage daily field operations to ensure mechanical projects are delivered safely and on schedule., • Coordinate with project managers and site superintendents to maintain strict project timelines and material efficiency., • Maintain accurate daily documentation regarding project progress and quality control standards., • Resolve real-time technical challenges and logistical issues on site to maximize plumbing system performance., • Mentor and guide junior apprentices in the field to foster a culture of professional growth and safety. Required Qualifications & Experience • Active State of Texas Licensed Plumber designation., • Proven experience executing complex commercial or industrial plumbing work with minimal oversight., • Proficiency in reading and interpreting detailed mechanical drawings, specifications, and project layouts., • Willingness to travel up to 10% for specific project assignments as required by the business., • Strong communication and organizational skills necessary for managing field installations and team dynamics. Preferred Qualifications & Experience • Minimum of 5 years of related work experience in the mechanical and HVAC trade., • Demonstrated experience in mentorship or training junior team members in a field environment., • Advanced knowledge of industrial plumbing systems and specialized federal or government installations. Compensation & Benefits • Weekly pay cycle and performance-based bonuses available., • Competitive 401(k) retirement savings program with employer matching., • Comprehensive medical, dental, and vision insurance packages., • Life and disability insurance options with safety equipment provided., • Generous paid time off including holidays, vacation, and sick leave., • Travel projects provided with per diem, a company vehicle, and a fuel card., • Paid training programs, manufacturer training, and OSHA certifications., • Technology package including a company-provided smartphone or tablet., • Access to annual company trips, outings, and yearly family parties. About Us Howards Mechanical Inc. is a trusted name in commercial and industrial mechanical installations, operating as a family-owned and operated business. We foster a supportive environment where long-term employees thrive through dedicated mentorship and ongoing professional development. Learn more at howardsmechanical.com. Howards Mechanical Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Certified Group is committed to partnering with customers to deliver innovative scientific solutions and expertise – So The World Can Trust In What It Consumes™. Our network of 30+ North American and European laboratories serves the food & beverage, dietary supplements, cosmetics, OTC, tobacco/nicotine, cannabis, and hemp industries. Our Brands Certified Group is comprised of a set of specialized brands that collectively deliver laboratory testing, regulatory consulting, and certification & audit services across highly regulated industries: • Certified Laboratories – Provides comprehensive analytical and microbiological testing, primarily supporting food, beverage, cosmetics, OTC, and dietary supplement industries., • Food Safety Net Services (FSNS) – A leading network of ISO-accredited laboratories across North America, focused on food safety testing, operational support, and technical services for the food industry., • Labstat – A global leader in contract research and testing for nicotine, tobacco, cannabis, hemp, and next-generation products, with deep expertise in analytical chemistry and toxicology., • EAS Consulting Group – A regulatory consulting firm offering expert guidance, training, and auditing support across FDA, USDA, and other regulated sectors, powered by a large network of independent advisors., • FSNS Certification & Audit – Provides accredited third-party auditing and certification services, including food safety, animal welfare, and GMP programs. Job Summary The Lab Assistant within the Media Department is responsible for preparing, sterilizing, and organizing media and reagents essential to analytical and microbiological testing of food products, ingredients, and environmental samples. This role ensures the availability of accurate, sterile materials to support testing operations while maintaining laboratory safety and compliance standards. Essential Responsibilities • Prepare and maintain bacteriological media and chemical solutions., • Safely operate an autoclave to sterilize media, reagents, and supplies., • Label, handle, store, use, and dispose of media and solutions in accordance with safety guidelines., • Maintain an accurate inventory of prepared media and supplies., • Collaborate with other departments to prepare required media in a timely manner., • Perform work in a neat, safe, hygienic, and efficient manner; maintain cleanliness and equipment within the department., • Follow established processes, procedures, and techniques in accordance with FSNS policies/procedures, customer requirements, and the media operations manual., • Maintain laboratory conditions, equipment, supplies, quality assurance programs, and accurate records throughout all procedures., • Share information in an open and timely manner to support team collaboration., • Complete required training and comply with safety and quality programs. Education & Experience • High School Diploma or GED required., • Familiarity with aseptic sampling techniques., • Experience operating autoclaves and sterile dispensing equipment preferred., • Basic knowledge of testing laboratory practices and general laboratory procedures., • One or more years of experience in a commercial food-testing laboratory preferred., • Competency with Laboratory Information Management Systems (LIMS) a plus., • Equivalent combination of education and experience may be considered. Skills & Competencies • Strong organizational skills and ability to complete detailed manual tasks., • Ability to work under deadlines, manage interruptions, and multitask effectively., • Logical thinking and accuracy in task completion., • Basic math skills: add, subtract, multiply, divide, and work with fractions and decimals., • Ability to follow written and oral instructions and problem-solve within standardized situations., • Working knowledge of ISO 17025 quality procedures and general OSHA laboratory safety guidelines preferred. Physical Demands & Work Environment • Frequent standing, walking, sitting, reaching, and handling of materials., • Occasional stooping, kneeling, crouching, or crawling., • Regular use of hands and fingers to operate laboratory equipment and computers., • Ability to lift and/or move up to 25 pounds., • Potential exposure to odors, fumes, airborne particles, hazardous chemicals, and microbiological pathogens., • Varying noise levels and temperatures (hot to cold)., • Fast-paced, team-oriented environment., • Overnight travel may be required at the discretion of management., • Must wear appropriate protective clothing and equipment. General Requirements • Flexible schedule availability., • Ability to perform opening and closing procedures in the media laboratory., • Commitment to workplace safety for self and others., • Willingness to work as part of a collaborative, team-driven environment. By applying, you acknowledge that Certified Group will process your personal information for recruitment and hiring purposes in accordance with our Applicant Privacy Policy. California residents may review additional information about how we collect and use personal information, including retention and rights, in our California Notice at Collection. To view our Privacy Policy, click the link here: Certified Group Privacy Policy We are an Equal Opportunity Employer and make employment decisions without regard to protected characteristics under applicable law.