Trabajos hand en Chattanooga, TennesseeCrear alertas

_ Join Our Community of Food People! BECOME A US FOODS® DRIVER! Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods® helps our customers Make It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods®, we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit _ and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $24.87 and $58.00. As applicable, this role may also receive overtime compensation, retention bonus, and component pay (i.e., based on cases, mileage, stops). Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

_ Join Our Community of Food People! BECOME A US FOODS® DRIVER! Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods® helps our customers Make It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods®, we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit _ and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $24.87 and $58.00. As applicable, this role may also receive overtime compensation, retention bonus, and component pay (i.e., based on cases, mileage, stops). Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Immediate Opportunities: Full-time Local Class B Delivery Truck Drivers • Average $79352 annually, • Tuesday through Saturday, • Home daily, • Dedicated route You will drive: • Late model, Penske Truck Leasing trucks, • Best-in-class specs designed for comfort and safety, • Equipped with inward and outward facing in-cab cameras helping to ensure safety for all What you will do: • Perform multi-stop deliveries of parts and supplies to automotive dealerships, • Unload trailer using manual pallet jacks, hand trucks, and rolling cages, • Use scanner to scan products as they are unloaded and delivered Schedule: • Tuesday through Saturday, • Third shift dispatch Comprehensive benefits package includes: • Paid vacation and holidays day 1, • Generous retirement benefit, • Excellent health care coverage-medical, dental, and vision, • Short and long-term disability; life and AD&D insurance, • Company-provided uniforms and safety footwear, • Employee discount benefit program, • Driver referral bonus program up to $5000 per referral, • Safety incentive program, • Premier Driver Recognition Program Why Penske? Ready to put your truck-driving career in high gear? Make the shift and fuel your career as a CDL Class B Truck Driver for Penske. When you join Penske, you join a team of professional truck drivers committed to delivering products safely and on time. And we’re proud to haul freight for some of the world’s leading brands. (Yes, we’re more than just the yellow trucks. But it’s more than that. It’s about incredible customer service and building relationships with your accounts. When you drive for Penske, you’re representing Penske, but you’re also representing your clients. In fact, you’ll probably be driving their branded trucks and wearing their uniform. You’ll be on the move with Penske and so will your career. We have tons of training opportunities for you. And with locations across the nation, you can also move to a new city. Best of all, you’ll be with a stable, nationwide company that is known for having the best equipment, great management, clear communication and a fantastic safety record. We pay every Friday, and for most of our driving positions, you’re home daily. Yes, daily. Are you ready to take it to the next level? Come drive for Penske. Qualifications: • Valid Class B CDL Airbrake endorsement required. Applicants must be domiciled in the U.S. and licensed in their state of residence, • Currently hold, or ability to obtain, a non-excepted interstate DOT medical card required, • 1 year of documented relevant commercial vehicle driving experience in the last 5 years required, • 3 years DMV/MVR record with two or fewer moving violations or accidents, • Follow all federal and/or state laws, regulations, and/or agency rules, standards and guidelines, • Regular, predictable, full attendance is an essential function of the job, • In order to be compliant with federal law (49 C.F.R. 391.11(b)(2)), this role requires English language proficiency, • Work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening required., • This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The associate must be able to see and hear. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus., • While performing the duties of this job, the associate will be required to move frequently, stand, walk, and sit. The associate is frequently required to use hands to touch, handle, and feel, and to reach with hands and arms. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg., • The associate must be able to legally operate a motor vehicle and safely and frequently enter/exit the vehicle as well as the rear cargo area. Penske is an Equal Opportunity Employer. About Penske Logistics Penske Logistics engineers state-of-the-art transportation, warehousing and freight management solutions that deliver powerful business results for market-leading companies. With operations in North America, South America, Europe and Asia, Penske and its associates help businesses move forward by increasing visibility and driving down supply-chain costs. Visit Penske Logistics to learn more. Job Category: Driver Job Family: Drivers Address: 4139 S Creek Rd Primary Location: US-TN-Chattanooga Employer: Penske Logistics LLC Req ID: 2607017

Job Description About the Role: If your passionate about food and friendly service, then join the Tailwind team! We are searching for an enthusiastic Prep Cook to provide delicious meals and excellent customer service for an amazing guest experience and bring a fun, inviting atmosphere to all travelers. As a Prep Cook, you will be responsible for preparing and cooking a variety of dishes, ensuring that they are of high quality and meet our customers' expectations. Your attention to detail and ability to work efficiently in a fast-paced environment will be crucial to your success in this role. Tailwind encourages Veterans and Military family members to apply! Responsibilities include but are not limited to: • Provides quality food products consistently for all customers by adhering to all recipe and presentation standards, • Following prep lists created by the management team, • Measuring ingredients and seasonings, • Ensuring all food items are properly stored and easily accessible, • Supervising food and cooling room temperatures, • Maintaining a clean, orderly, and sanitized kitchen, • Follow all health and safety guidelines, ensuring a safe work environment, • Prepares, washes, and cuts food to be cooked, • Restock and replenish product and inventory supplies, • Interact with customers in a positive and upbeat manner, • Work with a Team to provide the best possible customer experience, • All other duties as assigned Qualifications/Skills: • Accountability for the ingredients prepped measuring up to the expectations of management, • Comprehension and organization to follow direct orders, recipes and to correctly prepare dishes to the standards of the restaurant, • Manual dexterity and hand-eye coordination to handle tools, such as knife techniques for chopping, slicing, cutting and dicing, • Ability to stand in one place for hours at a time, handle extreme heat and work shifts Requirements: • Must be able to pass background check to receive airport badge, • Must have reliable transportation Benefits: • Paid training, • Employee discount, • Employee referral program, • 401 with employer matching, • Health, Dental and Vision offered to Full-time employees Tailwind Concessions is an equal opportunity employer committed to creating a diverse and inclusive work environment. We do not discriminate based on race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age (40 or older), disability, or genetic information. We provide reasonable accommodations for individuals with disabilities in accordance with the Americans with Disabilities Act (ADA). If you require any accommodations during the application process, please contact our HR department.

Job Description Job Title: Assembler Job Description As a Technician, you will play a critical role in the assembly of electrical control panels, junction boxes, and wire harnesses based on engineering prints. Your primary responsibility will be to physically assemble, wire, and test control panels for industrial equipment, ensuring precision and quality in every detail. From fabricating controls to the final testing phase, you will be involved in the entire process, guaranteeing that all components are mounted correctly, wired accurately, and tested thoroughly for optimal performance. Your meticulous attention to detail and adherence to company policies and procedures will be key in delivering top-notch automation solutions. Responsibilities • Assemble and wire control panels based on engineering prints., • Fabricate controls and perform final testing., • Mount components correctly and wire accurately., • Test control panels thoroughly for optimal performance., • Follow company policies and procedures diligently. Essential Skills • Experience in wiring and assembly of electrical components., • Proficiency in control panel building and panel wiring., • Capability in using hand tools for mechanical and electrical assembly., • Attention to detail and ability to follow instructions., • Skills in electrical wiring, stripping, and crimping. Additional Skills & Qualifications • Experience in similar roles is advantageous., • Capability to work independently and as part of a team. Why Work Here? Enjoy great benefits and opportunities for longevity and growth within the company. Experience a family feel in a very relaxed work environment. Work Environment Work during the 1st shift from 7:00 AM to 3:30 PM, Monday through Friday, with potential overtime at the start of the shift. Enjoy a relaxed and supportive atmosphere while contributing to impactful projects. Job Type & Location This is a Contract position based out of Chattanooga, TN. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chattanooga,TN. Application Deadline This position is anticipated to close on Aug 5, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Zack Group is seeking a travel nurse RN PACU - Post Anesthesia Care for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements • Specialty: PACU - Post Anesthesia Care, • Discipline: RN, • Start Date: 08/03/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel Zack Group is currently seeking Pre-Op/Post-OP/Same Day Surgery RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Days, 07:00:00-19:00:00, 12.00-3 position in the Pre-Op/Post-OP/Same Day Surgery. Must have an active License in hand and have at least 2 years of recent Pre-Op/Post-OP/Same Day Surgery experience as a RN . Requirements • Current Resume, • Active License as an Pre-Op/Post-OP/Same Day Surgery, • Current BLS and/or ACLS and/or Specialty Certifications for Pre-Op/Post-OP/Same Day Surgery, • 2 current leadership references, • Must be able to pass background/urine drug screening Compensation and Benefits We offer: • Highly competitive pay rates, • Meals & Housing – Highest non-taxed available, • Day 1 Health Benefits package, • Weekly Pay, • Teladoc, 401k and HRA/HSA, • Refer a friend and earn extra cash! At Zack Group, we have your future in mind. It’s our priority! Please call or text us Today! Our Healthcare recruiters are standing by! Opt In: By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) Zack Group Job ID #37265051. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:Pre-Op/Post-OP/Same Day Surgery,07:00:00-19:00:00 About Zack Group Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. Benefits • 401k retirement plan, • Medical benefits, • Dental benefits, • Vision benefits

\n Zack Group is seeking a travel nurse RN PACU - Post Anesthesia Care for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements\n \n • Specialty: PACU - Post Anesthesia Care\n, • Discipline: RN\n, • Start Date: 08/03/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, days\n, • Employment Type: Travel\n \n \n Zack Group is currently seeking PACU RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Days, 07:00:00-19:00:00, 12.00-3 position in the PACU. Must have an active License in hand and have at least 2 years of recent PACU experience as a RN . \n Requirements \n • Current Resume \n • Active License as an PACU \n • Current BLS and/or ACLS and/or Specialty Certifications for PACU \n • 2 current leadership references \n • Must be able to pass background/urine drug screening \n Compensation and Benefits \n We offer: \n • Highly competitive pay rates \n • Meals & Housing – Highest non-taxed available \n • Day 1 Health Benefits package \n • Weekly Pay \n • Teladoc, 401k and HRA/HSA \n • Refer a friend and earn extra cash! \n At Zack Group, we have your future in mind. It’s our priority! \n Please call or text us Today! Our Healthcare recruiters are standing by! \n Opt In: \n By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) \n \n Zack Group Job ID #37473495. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:PACU,07:00:00-19:00:00 About Zack Group\n \n Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. \n \n Benefits\n \n • 401k retirement plan\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n \n

Zack Group is seeking a travel nurse RN Med Surg for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Start Date: 08/03/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Zack Group is currently seeking Med/Surg RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Nights, 19:00:00-07:00:00, 12.00-3 position in the Med/Surg. Must have an active License in hand and have at least 2 years of recent Med/Surg experience as a RN . Requirements • Current Resume, • Active License as an Med/Surg, • Current BLS and/or ACLS and/or Specialty Certifications for Med/Surg, • 2 current leadership references, • Must be able to pass background/urine drug screening Compensation and Benefits We offer: • Highly competitive pay rates, • Meals & Housing – Highest non-taxed available, • Day 1 Health Benefits package, • Weekly Pay, • Teladoc, 401k and HRA/HSA, • Refer a friend and earn extra cash! At Zack Group, we have your future in mind. It’s our priority! Please call or text us Today! Our Healthcare recruiters are standing by! Opt In: By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) Zack Group Job ID #37235755. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:Med/Surg,19:00:00-07:00:00 About Zack Group Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. Benefits • 401k retirement plan, • Medical benefits, • Dental benefits, • Vision benefits

\n Fusion Medical Staffing-Nursing is seeking a travel nurse RN Med Surg for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements\n \n • Specialty: Med Surg\n, • Discipline: RN\n, • Start Date: 08/03/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n Travel Med Surg RN\n Company: Fusion Medical Staffing \n Location: Facility in Chattanooga, Tennessee Job Details\n Fusion Medical Staffing is seeking a Med Surg RN for a 13-week travel assignment in Chattanooga, Tennessee. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications:\n \n • One year of recent Med Surg RN experience\n, • Valid RN license in compliance with state regulations\n, • Current BLS (AHA/ARC) Certification\n Preferred Qualifications:\n \n, • NIHSS certification\n, • ACLS (AHA/ARC) certification\n, • Other certifications and licenses may be required for this position\n Summary:\n The Med Surg Registered Nurse delivers comprehensive high-quality, patient-centered care in medical-surgical and telemetry units. This role involves assessing patient health conditions, monitoring cardiac telemetry data, and collaborating with multidisciplinary teams to manage diverse patient needs. The position requires strong clinical skills in med-surg and telemetry nursing, critical thinking abilities, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics. Essential Work Functions:\n \n • Explain procedures and treatments to patients and families, addressing concerns and ensuring understanding\n, • Administer prescribed medications and treatments in adherence to nursing standards\n, • Conduct comprehensive assessments of patients’ conditions, documenting changes and reporting concerns to the care team\n, • Prepare patients for diagnostic procedures, assist physicians during treatments, and monitor patient responses\n, • Maintain a safe and comfortable environment for patients recovering from medical conditions or surgical procedures\n, • Document comprehensive patient information, including vital signs, medications, treatments, and care outcomes, in the medical record\n, • Collaborate with interdisciplinary teams, including physicians, physical therapists, and social workers, to create and implement individualized care plans\n, • Manage multiple patients efficiently, prioritizing care based on acuity and clinical needs\n, • Ensure infection control practices are strictly followed, including hand hygiene and PPE use\n, • Advocate for patients’ needs and preferences, ensuring they are respected and integrated into the care plan\n, • Facilitate discharge planning, coordinating with patients, families, and external resources to ensure a smooth transition from hospital to home\n, • Perform other duties as assigned within the scope of practice\n, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standards\n Required Essential Skills:\n \n, • Critical thinking, service excellence, and good interpersonal communication skills\n, • The ability to read, write, and communicate in the English language\n, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills\n, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend\n, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism\n, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment\n, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail\n, • Sensory - Must possess visual acuity and ability to effectively communicate\n Benefits Include:\n \n, • Highly competitive pay for travel professionals\n, • Comprehensive medical, dental, and vision insurance with first day coverage\n, • Paid Time Off (PTO) after 1560 hours\n, • Life and Short-term disability offered\n, • 401(k) matching\n, • Aggressive Refer-a-friend Bonus Program\n, • 24/7 recruiter support\n, • Reimbursement for licensure and CEUs\n Why Choose Fusion?\n At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer:\n To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. \n Start your rewarding career as a Travel Med Surg RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! \n *Fusion is an EOE/E-Verify Employer \n \n \n Fusion Medical Staffing - Nursing Job ID #1939279. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Nursing\n \n With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. \n As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. \n We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. \n \n Benefits\n \n • Benefits start day 1\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n, • Referral bonus\n, • Mileage reimbursement\n, • License and certification reimbursement\n, • Weekly pay\n, • Cancelation protection\n, • Guaranteed Hours\n, • Employee assistance programs\n, • Continuing Education\n \n

Job DescriptionClass A CDL Driver – Hazmat & Tanker JAT Energy is Looking for New Team Members!Who We Are What began in 1976 with a single truck has grown into one of the largest and most reliable fuel and energy distributors in the Southeastern United States. Headquartered in Chattanooga, Tennessee, JAT Energy now serves customers across eight states, while maintaining the same commitment to service and excellence that defined our early days. At JAT Energy, you're not just starting a job—you're joining a company that values its people as much as the products and services we provide. We take pride in our team and are committed to fostering an environment where employees feel supported, challenged, and motivated. Our culture is built on trust, respect, and open communication. Our mission is simple: to power our customers with unparalleled service, innovative energy solutions, and unmatched convenience. We are committed to strengthening communities, embracing diversity and equity, and creating an environment where every team member and partner can thrive. Class A CDL Driver – Hazmat & Tanker Qualifications • Valid Class A Commercial Driver's License (CDL) with Tanker and Hazmat endorsements, • Ability to pass all DOT-required screenings, including drug testing and physical examination, with or without reasonable accommodation, • Clean Motor Vehicle Record (MVR), • Minimum of 12 months of commercial motor vehicle (CMV) driving experience, • Demonstrated ability to follow detailed written and verbal instructions, safety procedures, and regulatory requirements, • Proficiency in the use of computers, tablets, or handheld devices for electronic logging, dispatch communication, and delivery documentation Essential Job Functions, • Safely operate fuel tanker trucks to transport and deliver fuel to customer locations, • Load and unload fuel accurately, ensuring correct product type and quantity, • Conduct required pre-trip and post-trip vehicle inspections to ensure safe operation and regulatory compliance, • Follow all safety protocols and procedures related to the transportation of hazardous materials, • Maintain accurate electronic and/or written records, including delivery documentation and vehicle maintenance logs, • Communicate efficiently with dispatch, supervisors, and team members regarding routes, schedules, and delivery status, • Report mechanical issues, accidents, incidents, or traffic violations in a timely manner, • Perform routine vehicle maintenance tasks such as checking tire pressure and fluid levels, • Comply with all applicable local, state, and federal laws and regulationsPhysical and Environmental Requirements The following requirements are representative of those that must be met to perform the essential functions of this position, with or without reasonable accommodation:, • Ability to repetitively pull up to 100 pounds for distances of approximately 100–150 feet, • Ability to perform frequent and repetitive hand and arm movements while operating equipment and controls, • Ability to stand and walk for extended periods, including up to 10-12 hours during a 14-hour shift  Ability to work in a physically demanding role and in varying weather and environmental conditions, • Ability to safely enter and exit vehicles multiple times a day and access fuel delivery equipmentJob Type, • Full-timeBenefits, • 401(k), • 401(k) matching, • Health insurance, • Dental insurance, • Vision insurance, • Paid time off, • Referral programSchedule, • Overtime as requiredSupplemental Pay, • Bonus opportunities, • Signing bonusTrucking Details, • Company driver, • Local routesEqual Employment Opportunity Statement JAT Energy is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities. PIe17f1690ff12-25405-40388830

\n Zack Group is seeking a travel nurse RN PCU - Progressive Care Unit for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements\n \n • Specialty: PCU - Progressive Care Unit\n, • Discipline: RN\n, • Start Date: 07/27/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n \n Zack Group is currently seeking PCU/IMC/Stepdown RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Nights, 19:00:00-07:00:00, 12.00-3 position in the PCU/IMC/Stepdown. Must have an active License in hand and have at least 2 years of recent PCU/IMC/Stepdown experience as a RN . \n Requirements \n • Current Resume \n • Active License as an PCU/IMC/Stepdown \n • Current BLS and/or ACLS and/or Specialty Certifications for PCU/IMC/Stepdown \n • 2 current leadership references \n • Must be able to pass background/urine drug screening \n Compensation and Benefits \n We offer: \n • Highly competitive pay rates \n • Meals & Housing – Highest non-taxed available \n • Day 1 Health Benefits package \n • Weekly Pay \n • Teladoc, 401k and HRA/HSA \n • Refer a friend and earn extra cash! \n At Zack Group, we have your future in mind. It’s our priority! \n Please call or text us Today! Our Healthcare recruiters are standing by! \n Opt In: \n By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) \n \n Zack Group Job ID #37339342. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:PCU/IMC/Stepdown,19:00:00-07:00:00 About Zack Group\n \n Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. \n \n Benefits\n \n • 401k retirement plan\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n \n

\n Zack Group is seeking a travel nurse RN Med Surg / Telemetry for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements\n \n • Specialty: Med Surg / Telemetry\n, • Discipline: RN\n, • Start Date: 08/10/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n \n Zack Group is currently seeking Med/Surg RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Nights, 19:00:00-07:00:00, 12.00-3 position in the Med/Surg. Must have an active License in hand and have at least 2 years of recent Med/Surg experience as a RN . \n Requirements \n • Current Resume \n • Active License as an Med/Surg \n • Current BLS and/or ACLS and/or Specialty Certifications for Med/Surg \n • 2 current leadership references \n • Must be able to pass background/urine drug screening \n Compensation and Benefits \n We offer: \n • Highly competitive pay rates \n • Meals & Housing – Highest non-taxed available \n • Day 1 Health Benefits package \n • Weekly Pay \n • Teladoc, 401k and HRA/HSA \n • Refer a friend and earn extra cash! \n At Zack Group, we have your future in mind. It’s our priority! \n Please call or text us Today! Our Healthcare recruiters are standing by! \n Opt In: \n By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) \n \n Zack Group Job ID #37541924. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:Med/Surg,19:00:00-07:00:00 About Zack Group\n \n Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. \n \n Benefits\n \n • 401k retirement plan\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n \n

Zack Group is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 08/10/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Zack Group is currently seeking L&D RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Nights, 19:00:00-07:00:00, 12.00-3 position in the L&D. Must have an active License in hand and have at least 2 years of recent L&D experience as a RN . Requirements • Current Resume, • Active License as an L&D, • Current BLS and/or ACLS and/or Specialty Certifications for L&D, • 2 current leadership references, • Must be able to pass background/urine drug screening Compensation and Benefits We offer: • Highly competitive pay rates, • Meals & Housing – Highest non-taxed available, • Day 1 Health Benefits package, • Weekly Pay, • Teladoc, 401k and HRA/HSA, • Refer a friend and earn extra cash! At Zack Group, we have your future in mind. It’s our priority! Please call or text us Today! Our Healthcare recruiters are standing by! Opt In: By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) Zack Group Job ID #37417731. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:L&D,19:00:00-07:00:00 About Zack Group Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. Benefits • 401k retirement plan, • Medical benefits, • Dental benefits, • Vision benefits

\n Zack Group is seeking a travel nurse RN Cardiac PCU - Progressive Care Unit for a travel nursing job in Chattanooga, Tennessee. Job Description & Requirements\n \n • Specialty: Cardiac PCU - Progressive Care Unit\n, • Discipline: RN\n, • Start Date: ASAP\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n \n Zack Group is currently seeking PCU/IMC/Stepdown RN’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 3x12 Nights, 19:00:00-07:00:00, 12.00-3 position in the PCU/IMC/Stepdown. Must have an active License in hand and have at least 2 years of recent PCU/IMC/Stepdown experience as a RN . \n Requirements \n • Current Resume \n • Active License as an PCU/IMC/Stepdown \n • Current BLS and/or ACLS and/or Specialty Certifications for PCU/IMC/Stepdown \n • 2 current leadership references \n • Must be able to pass background/urine drug screening \n Compensation and Benefits \n We offer: \n • Highly competitive pay rates \n • Meals & Housing – Highest non-taxed available \n • Day 1 Health Benefits package \n • Weekly Pay \n • Teladoc, 401k and HRA/HSA \n • Refer a friend and earn extra cash! \n At Zack Group, we have your future in mind. It’s our priority! \n Please call or text us Today! Our Healthcare recruiters are standing by! \n Opt In: \n By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) \n \n Zack Group Job ID #37246821. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:PCU/IMC/Stepdown,19:00:00-07:00:00 About Zack Group\n \n Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. \n \n Benefits\n \n • 401k retirement plan\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n \n

\n Zack Group is seeking a travel First Assist Technician for a travel job in Chattanooga, Tennessee. Job Description & Requirements\n \n • Specialty: First Assist Technician\n, • Discipline: Allied Health Professional\n, • Start Date: 08/03/2026\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n \n Zack Group is currently seeking CSFA Surgical Technician’s for positions in Chattanooga, Tennessee. The ideal candidate will possess a current state or equivalent compact license. This is a 5x8 days, 06:00:00-14:00:00, 8.00-5 position in the CSFA. Must have an active License in hand and have at least 2 years of recent CSFA experience as a Surgical Technician . \n Requirements \n • Current Resume \n • Active or Pending State License as an CSFA \n • Current BLS and/or Specialty Certifications for CSFA \n • 2 current leadership references, 1 current co-worker \n • Must be able to pass background/urine drug screening \n Compensation and Benefits \n We offer: \n • Highly competitive pay rates \n • Meals & Housing – Highest non-taxed available \n • Day 1 Health Benefits package \n • Contracts more than 6 months qualify for optional PTO (Ex: School) \n • Weekly Pay \n • Teladoc, 401k and HRA/HSA \n • Refer a friend and earn extra cash! \n At Zack Group, we have your future in mind. It’s our priority! \n Please call or text us Today! Our Healthcare recruiters are standing by! \n Opt In: \n By providing your phone number and engaging with Lynn Care, LLC (also known as Zack Group), its affiliates, and contracted partners—including via text message, phone call, AI-generated call, AI-generated text, or email—you consent to receive communications regarding job opportunities. Message frequency may vary based on your engagement. By texting Zack Group or any associated entity, you agree to our Privacy Policy and Terms of Use ( You can reply STOP to cancel and HELP for help) \n \n Zack Group Job ID #37473496. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Surgical Technician:CSFA,06:00:00-14:00:00 About Zack Group\n \n Zack Group has been active in the medical staffing sector for over 25 years, providing a wide range of services to top-tier healthcare facilities, including PRN/Per Diem, contract and permanent placement. Through its Traveling Nurse division, Zack Group places certified nursing professionals with healthcare facilities across the United States. Headquartered in Overland Park, KS, Zack Group has additional representation in Topeka and Wichita, Kansas, along with Tulsa, Oklahoma. Our local office partners with facilities throughout the Kansas, Missouri, and Oklahoma region while our travel office handles the whole country. \n \n Benefits\n \n • 401k retirement plan\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n \n

Job Description OUR VISION: "To become an indispensable partner to building owners with mission-critical systems." POSITION SUMMARY/OBJECTIVE: The incumbent fabricates, assembles, installs, and repairs sheet metal products and equipment. Base hourly rate of $22/hr - $25/hr KEY TASKS & RESPONSIBILITIES: • Shears, forms, handles, bends, and welds thin sheet metal during the fabrication process., • Operates shears, plasma machines, press brakes, welding machines, and other various hand tools., • Loads and unloads trucks of material to be staged and installed throughout the jobsite., • Hangs steel supports from ceiling joists and concrete slabs to hold ducts in place., • Measures and marks dimensions and reference lines on metal sheets., • Drills holes in metal for screws, bolts, and rivets. Installs metal ducts with supportive frameworks., • Fabricates or alters parts at construction sites on an as-needed basis., • Fastens seams and joints by welding, bolting, or riveting., • Reviews blueprints and specifications to determine work sequence and effective, safe procedures., • Completes all AHA’s and daily huddles, and pre-plans work to ensure safety, productivity, and quality., • Inspects equipment, structures, and materials to identify the cause of errors, safety hazards, or other issues, and solutions or escalates them appropriately and clearly understands “stop work” authority.. CONDUCT STANDARDS: • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • Consistently exemplifies the Core Values of the Company (we CARE, we ACT WITH INTEGRITY, we are INNOVATIVE, and we are ACCOUNTABLE). WORK ENVIRONMENT: • This position operates primarily in the field installing, maintaining, and repairing and HVAC systems. Jobsite work is likely to entail varying exposure to weather, potentially harmful materials or chemicals, fumes, odors, noise, dangerous machinery, and/or other conditions typically associated with a live construction site., • Depending on the work location, the incumbent may be exposed to extreme temperatures, inclement weather, noise, poor ventilation/lighting, and other hazards or conditions typically associated with a construction job site. PHYSICAL DEMANDS: (Approximations on a daily basis) Standing, Walking 4-6 Hours Sitting 1-2 Hours Reaching Above Shoulder Height 2-4 Hours Working with Body Bent at Waist 2-4 Hours Working with Arms Extended at Shoulder Level 1-2 Hours Kneeling, Crawling, Squatting 1-2 Hours Hand Tool Manipulation 2-3 Hours Pushing, Pulling 1-2 Hours Twisting, Turning 2-4 Hours Driving Commercial Vehicle 1-2 Hours Climbing Ladders, Stairs 1-2 Hours Lifting, Carrying without Assistance (Maximum) 50 Pounds TRAVEL: • This position may be required to travel between jobs on a periodic basis as needed. MINIMUM QUALIFICATIONS: • 0-4 years of mechanical contracting experience., • General knowledge of HVAC systems., • Capacity to facilitate teamwork and collaborative relationships., • Willingness and ability to work nights and overtime on an as-needed basis., • Must have a valid driver's license., • Must have a driving record compliant with the Company's policies and MVR requirements, and consent to ongoing driving record monitoring by the Company. PREFERRED QUALIFICATIONS: • Rigging and Signaling Certification., • Forklift Certification., • Aerial and Scissor Lift Certification., • First Aid & CPR This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description OUR VISION: "To become an indispensable partner to building owners with mission-critical systems." POSITION SUMMARY/OBJECTIVE: The incumbent fabricates, assembles, installs, and repairs sheet metal products and equipment. S/he may occasionally oversee and direct the work of a small group of laborers. Base hourly rate of $30.00 - $32.00 per hour KEY TASKS & RESPONSIBILITIES: • Shears, forms, handles, bends, and welds thin sheet metal during the fabrication process., • Operates shears, plasma machines, press brakes, welding machines, and other various hand tools., • Loads and unloads trucks of material to be staged and installed throughout the jobsite., • Hangs steel supports from ceiling joists and concrete slabs to hold ducts in place., • Measures and marks dimensions and reference lines on metal sheets., • Drills holes in metal for screws, bolts, and rivets. Installs metal ducts with supportive frameworks., • Fabricates or alters parts at construction sites on an as-needed basis., • Fastens seams and joints by welding, bolting, or riveting., • Reviews blueprints and specifications to determine work sequence and effective, safe procedures., • Completes all AHA’s and daily huddles, and pre-plans work to ensure safety, productivity, and quality., • Inspects equipment, structures, and materials to identify the cause of errors, safety hazards, or other issues, and solutions or escalates them appropriately., • Facilitates knowledge transfer and teaches trade skills to less experienced tradespeople and leads by example. CONDUCT STANDARDS: • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • Consistently exemplifies the Core Values of the Company (we CARE, we ACT WITH INTEGRITY, we are INNOVATIVE, and we are ACCOUNTABLE). WORK ENVIRONMENT: • This position operates primarily in the field. Jobsite work is likely to entail varying exposure to weather, potentially harmful materials or chemicals, fumes, odors, noise, dangerous machinery, and/or other conditions typically associated with a live construction site., • Depending on the work location, the incumbent may be exposed to extreme temperatures, inclement weather, noise, poor ventilation/lighting, and other hazards or conditions typically associated with a construction job site. PHYSICAL DEMANDS: (Approximations on a daily basis) Standing, Walking 4-6 Hours Sitting 1-2 Hours Reaching Above Shoulder Height 2-4 Hours Working with Body Bent at Waist 2-4 Hours Working with Arms Extended at Shoulder Level 1-2 Hours Kneeling, Crawling, Squatting 1-2 Hours Hand Tool Manipulation 2-3 Hours Pushing, Pulling 1-2 Hours Twisting, Turning 2-4 Hours Driving Commercial Vehicle 1-2 Hours Climbing Ladders, Stairs 1-2 Hours Lifting, Carrying without Assistance (Maximum) 50 Pounds TRAVEL: • This position may be required to travel between jobs on a periodic basis as needed. MINIMUM QUALIFICATIONS: • Graduation from high school, vocational school, or training equivalent., • 5-8 years of mechanical contracting experience., • Ability to work from blueprints, sketches, and oral instructions under limited supervision., • Must be construction-document and drawing literate, with knowledge of all phases of construction., • Demonstrated knowledge of the methods, practices, techniques, tools, and equipment employed in the joining, jointing, cutting, bending, threading of all types of HVAC piping., • General knowledge of the hazards of the trade and necessary precautionary measures., • Willingness and ability to work nights and overtime on an as-needed basis., • Capacity to leverage leadership skills to facilitate learning, teamwork, and collaborative relationships., • Must have a valid driver's license., • Must have a driving record compliant with the Company's policies and MVR requirements, and consent to ongoing driving record monitoring by the Company. PREFERRED QUALIFICATIONS: • Rigging and Signaling Certification., • Forklift Certification., • Aerial and Scissor Lift Certification., • Completed OSHA 30-Hour Training., • Current First Aid/CPR Certification. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description Job Title: Variable Refrigerant Service Technician Reports to: Variable Refrigerant Director of Technical Operation FLSA Status: Full Time, Non-Exempt (Eligible for overtime) We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. Position Purpose: The primary purpose of the Variable Refrigerant Service Technician is to provide job site surveys during equipment installation, startup/commissioning of new equipment and systems, warranty service, owner direct preventative maintenance, and troubleshooting/repair services on variable refrigerant air conditioning equipment. This work involves both heat pump and heat recovery variable refrigerant systems including the system control network. This work also includes associated ancillary equipment such as dedicated makeup/outdoor air units. Hoffman is currently the manufacturer’s representative for Daikin Variable Refrigerant equipment. While Daikin is our primary brand and most of our workload, we also provide end user service support for numerous other brands of variable refrigerant equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs to provide emergency repairs. Provide guidance and direction to administrative personnel to effectively plan, schedule, coordinate, etc. all activities related to field variable refrigerant service and construction/replacement work. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. Employment at Will: Nothing herein is intended to create a contract of employment or to guarantee employment for a definite duration. Variable Refrigerant Service Technician Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction. Heavy emphasis on variable refrigerant equipment and systems., • Read and understand blueprints, equipment manuals, and engineering specifications to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Perform job site visits to monitor installation of new equipment. Provide technical support to installing contractor and report installation defects to management as needed., • Provide start up and commissioning service upon completion of construction. Support installing contractor to resolve problems that prohibit proper startup and commissioning. (i.e. piping leaks, communication faults, improper equipment mounting, improper piping installation, etc.), • Perform routine system preventive maintenance by utilizing manufacturer specific data logging device to analyze system performance. Must be able to understand the data and analyze in detail so minor problems such as faulty sensors are found prior to significant equipment damage., • Respond to service calls and utilize manufacturer specific data logging device to troubleshoot and diagnose variable refrigerant equipment and systems. Must be able to find root cause of failure and must be able to make the necessary repairs., • Identify, analyze, diagnose, and repair other non-variable refrigerant systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors, and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines., • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge/Experience/Critical Skills Required: • Education/Experience – associate degree or equivalent from a Technical/Trade School with a certificate in Heating, Ventilation, and Air Conditioning. Minimum of Five (5) years related experience preferred or an equivalent combination of education and experience., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost-effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demand Requirements: • In order to properly perform the duties of this job, the employee is regularly required to stand, talk, hear and use hands/fingers in order to grasp/handle/feel. The employee frequently is required to walk, reach, stoop, kneel, crouch, climb up and down ladders and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This position requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • This position requires frequent working outdoors, inside mechanical/equipment rooms, regularly being exposed to extreme inside/outside weather conditions to include extreme hot and/or extreme cold. This position is regularly exposed to live voltage, moving mechanical parts, and heavy equipment. Frequent exposure to wet and/or humid conditions, elevated and/or precarious workplaces, fumes or airborne particles, risk of electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is typically loud. • Standing: Frequently, • Walking: Frequently, • Sitting: Occasionally, • Stooping: Frequently, • Handling/Fingering: Frequently, • Climbing: Frequently, • Bending: Frequently, • Pushing/Pulling 12 lbs. or less: Frequently, • Lifting/Carrying 10 lbs. or less: Frequently, • Lifting/Carrying 11-50 lbs.: Frequently, • Lifting/Carrying 51-75 lbs.: Occasionally, • Reaching Outward: Frequently, • Reaching Above Shoulder: Frequently, • Squatting/Kneeling: Frequently, • Driving: Frequently This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. EOE/Disabled/Veterans

Job Description Job Title: HVAC Service Technician Status: Full Time, Non-Exempt (Eligible for overtime) Reports To: Service Manager or Manager of Technical Operations Work Schedule: Monday – Friday- based on customer needs Position Purpose: The primary purpose of the HVAC Service Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial air conditioning equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs in order to provide emergency repairs. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. HVAC Service Technician Essential Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction., • Read and understand blueprints, equipment manuals, and engineering specifications in order to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Identify, analyze, diagnose, and repair systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary in order to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines., • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge / Experience / Critical Skills • Education/Experience – Associate’s Degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning., • Minimum of Three (3) years related experience preferred., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demands • In order to properly perform the duties of this job, the employee is regularly required to stand, use hands in order to finger/grasp/handle/feel, talk, and hear. The employee frequently is required to walk, reach, stoop, kneel, crouch, and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This positions requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • This position requires frequent working outdoors, inside mechanical/equipment rooms, and possible extreme weather conditions. This position is regularly exposed to live voltage, moving mechanical parts, and heavy equipment. Frequent exposure to wet and/or humid conditions, elevated and/or precarious work places, fumes or airborne particles, outside weather conditions, risk of electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is typically loud. Reasonable Accommodations Statement: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. No phone calls or drop-ins, please. EEO Employer/Vets/Disabled

Job Description About the Role: As an HVAC Install Helper, you will work closely with experienced HVAC technicians to assist in the installation, maintenance, and repair of HVAC systems in residential properties. This is an entry-level position that offers hands-on training and the opportunity to gain valuable experience in the HVAC industry. If you have a strong work ethic, willingness to learn, and a passion for delivering top-notch service, we want to hear from you! Why You’ll Want to Work Here: • Core values that we live every day – not just words on a page: We Win Together, Today Not Tomorrow, Performance Not Politics, • Performance pay directly tied to results – You deliver for us, we deliver for you, • Benefits you will use – Full medical, dental, and vision packages including fully employer paid options, • Secure your financial future – 401(k) with company match, • We invest in your future – ongoing training that directly results into bigger career opportunities combined with continuous education stipends, • Speed and scale – Work with a company that operates at the speed of a start up with the investment backing of an institutional investor HVAC Install Helper Key Responsibilities: • Assist HVAC technicians in the installation, maintenance, and repair of HVAC systems, including furnaces, air conditioners, heat pumps, and ductwork., • Gather tools and materials required for HVAC projects., • Perform basic tasks such as carrying equipment, running ductwork, and connecting electrical components., • Follow instructions from HVAC technicians and learn proper techniques for HVAC installations., • Maintain a clean and organized work area to ensure efficiency and safety., • Adhere to safety protocols and follow HVAC codes and regulations., • Learn to troubleshoot basic HVAC system issues under the guidance of experienced technicians., • Collaborate with the team to ensure timely completion of projects., • Seek opportunities for learning and skill development to grow in the HVAC trade. HVAC Install Helper Qualifications: • High school diploma or equivalent., • Basic knowledge of HVAC systems and components is preferred but not required., • Strong mechanical aptitude and ability to work with hand and power tools., • Excellent communication and teamwork skills., • Ability to follow instructions and work independently when required., • Willingness to learn and take on new challenges., • Physical stamina and the ability to lift heavy objects., • Valid driver's license and reliable transportation. HVAC Install Helper Interpersonal Qualifications: • Customer service focus and mindset, putting our employees and Partners first, with excellent ability to communicate and develop relationships., • Exceptional problem-solving and conflict resolution abilities to improve things both big and small., • Highly organized, ability to act quickly while still having attention to detail., • Hold yourself to a higher standard and exhibit a high level of integrity. About Us: One Source Heating, Cooling, Plumbing & Electrical has proudly served the Birmingham, AL community since 1996. As a locally owned and operated company, we’re built on values of honesty, loyalty, and integrity—delivering trusted service that puts comfort first. From air conditioning and heating to plumbing and electrical solutions, our mission is to keep homes safe, efficient, and comfortable all year long. One Source is an equal opportunity employer. We consider all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state or federal law.

Job Description As a Project Specialist/Welder worker with our Hoffman Mechanical, you will become part of a team of stellar employees who are highly valued and skilled. We are an employed owned and operated business dedicated to performing quality work and providing outstanding service to our customers. As a member of our team, you will plan, lay out, repair and install sheet metal products, parts, and when needed assist with installing HVAC equipment. You will get to put your technical skills to use operating tools and machines and taking measurements according to blueprints. This role will be great for anyone who wants to make the most of their abilities and grow with a family- oriented company committed to hard work. Job Responsibilities • Utilize and interpret blueprints to determine how and where to fabricate, assemble and install sheet metal products, • Measure, mark dimensions and lay out material to be installed using tools such as scribes, rulers, calculators and squares, • Fasten joints and seams in sheet metal with solder, welds, caulk, bolts and metal driver clips, ensuring work is done carefully and bonds will last, • Install assemblies, including pipes, HVAC ducts, flashings, rain gutters and furnace casings in supportive frameworks, • Ensure that efficiency is maximized while fabricating and installing HVAC systems, • Use hand and power tools to trim, buff, smooth, file and grind metal surfaces and joints of parts that have been assembled to ensure safety and a seamless appearance, • Select the appropriate type and gauge of sheet metal to be used in projects according to specifications, • Ensure safety is a priority on the job during all activities, including using tools and installing and fabricating metal Job Skills & Qualifications Required: • High school diploma or equivalent, • Ability to lift heavy materials and tools, • Must be able to read and interpret blueprints, • 4 + years of experience Physical Demand Requirements: • Standing: Frequently, • Walking: Frequently, • Sitting: Occasionally, • Stooping: Frequently, • Handling/Fingering: Frequently, • Climbing: Frequently, • Bending: Frequently, • Pushing/Pulling 12 lbs. or less: Frequently, • Lifting/Carrying 10 lbs. or less: Frequently, • Lifting/Carrying 11-50 lbs.: Frequently, • Lifting/Carrying 51-75 lbs.: Occasionally, • Reaching Outward: Frequently, • Reaching Above Shoulder: Frequently, • Squatting/Kneeling: Frequently, • Driving: Frequently We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions. EOE / Vets / Disabled

Job DescriptionCompany Description Fifty years ago, Sam Walton started a single mom-and-pop shop and transformed it into the world's biggest retailer. Since those founding days, one thing has remained consistent: our commitment to helping our customers save money so they can live better. Today, we're reinventing the shopping experience and our associates are at the heart of it. You'll play a crucial role in shaping the future of retail, improving millions of lives around the world. This is that place where your passions meet purpose. Join our family and create a career you're proud of. Job Description Are you on the lookout for an exciting career opportunity within a dynamic team? Walmart is expanding our workforce across local retail stores and is actively recruiting Supermarket Rack Refrigeration HVAC Technician. If you possess relevant experience in this field, we invite you to bring your skills to our fast-paced and welcoming work environment! As a Supermarket Rack Refrigeration HVAC Technician at our local retail store, your role will support and oversee repair within the Walmart facilities Refrigeration HVAC equipment team and assets by utilizing commercial HVAC and Refrigeration skills and using hand tools, digital tools, power tools, and other equipment to complete jobs. Job Duties: • Maintain and repair Walmart facility's Refrigeration HVAC equipment and assets by utilizing commercial HVAC and Refrigeration skills and using hand tools, digital tools, power tools, and other equipment to complete jobs., • Utilize the work order management system to receive repair Work Orders to support Stores and Store associates and document repair activities., • Provide prompt response to emergency maintenance calls., • Inspecting, operating, or testing facilities, equipment, or fixtures to diagnose issues., • Complete all required training requirements to operate equipment and tools safely., • Ensures compliance with Occupational Safety and Health Administration and Environmental Protection Agency regulations and guidelines by performing work according to practices and procedures outlined in the Walmart Refrigeration HVAC safety policy and environmental guidelines., • Lift up to 75 pounds, move up and down ladders, and comfortable working at heights frequently Compensation: • Individual compensation packages are based on various factors unique to each candidate, including skill set, experience, level of job offer, qualifications and other job-related factors., • Eligible for bonus incentive Benefits & Perks: Beyond competitive pay, you can receive incentive awards for your performance. Other great perks include 401(k) match, stock purchase plan, paid maternity and parental leave, PTO, multiple health plans, and much more. • Multiple health plan options, including vision & dental plans for you & dependents, • Walmart discount, • Work vehicle and tools provided, • Financial benefits including 401(k), stock purchase plans, life insurance and more, • Live Better U is a Walmart-paid education benefit program for full-time and part-time associates in Walmart and Sam's Club facilities. Programs range from high school completion to bachelor's degrees, including English Language Learning and short-form certificates. Tuition, books, and fees are completely paid for by Walmart., • Pay during military service, • Paid time off - to include vacation, sick leave and parental leave, • Short-term and long-term disability for when you can't work because of injury, illness, or childbirth, • World-class training Qualifications, • 18 years or older with a High School Diploma or equivalent, • 2 years’ experience in commercial Refrigeration HVAC maintenance, • Large Scale Rack Refrigeration Experience, • Type I/Type II OR Universal Environmental Protection Agency (EPA) Certification for Refrigerant handling, • Hold a valid state-issued driver’s license with a clean driving record and ability to pass a Motor Vehicle Record (MVR) report Additional Information Walmart, Inc. is an Equal Opportunity Employer- By Choice. We believe we are best equipped to help our associates, customers, and the communities we serve live better when we really know them. That means understanding, respecting, and valuing diversity- unique styles, experiences, identities, abilities, ideas and opinions- while being inclusive of all people.

Job Description Lula is looking for a 1099 Hvac Repair Pro to help with property maintenance of several thousand rental properties across the Chattanooga area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: https://lula.life/become-a-provider/tennessee BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Please email pro@lula.life with any questions

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. King Door Company, a DH Pace Company, Inc., is currently looking for Residential Door Installers to install garage doors in residential areas. Job seekers with a background in construction labor, electrical work, fabrication, carpentry, installing and servicing products, and mechanic experiences typically do well in this job. Job Responsibilities: • Work independently to install and/or repair a wide range of residential garage doors, door hardware, and operating systems., • Identify opportunities to provide customers with products and services., • Install quality products and provide professional services for homeowners and homebuilders., • Track and maintain job related paperwork and submit in a timely manner., • Maintain a safe working environment and ensure that the job site is clean and clear of debris. Job Requirements: • Physical ability to lift up to 100 lbs. independently; the ability to bend, climb, and stand for an extended amount of time., • 1-3 year of construction experience preferred., • MUST have your own tools., • Strong background using power tools and hand tools is required., • Possess a valid driver's license. What We Offer • Comprehensive medical, dental, and vision coverage — available your first full month, • Generous paid time off plus paid holidays and floating holidays, • Company-paid life insurance, short-term disability, and long-term disability, • 401(k) with employer match, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Voluntary benefits including supplemental life and critical illness coverage, • Employee discounts for you and your immediate family, • Competitive compensation with annual performance reviews Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Enviremedial Services, Inc. is a fast-growing contractor seeking experienced, self-motivated, commercial service technicians with a great work ethic and drive to excel in this competitive and fast-paced industry. Leverage your current skills while developing new skills and join an incredible team. Are you tired of being on-call, working weekends, and holidays? Join our team and have a dependable schedule. Overnight travel is required for this position. We are currently seeking skilled Commercial HVAC Service Technicians with a minimum of 5 years of commercial HVAC service experience. The Commercial Service Technician is responsible for the installation, maintenance and repair of HVAC systems utilizing their knowledge of refrigeration theory, electrical schematics, pneumatics and electronic control systems, pipe fitting, welding/brazing and mechanical layouts. Technician will perform services on US ARMY Reserve sites throughout Alabama, Kentucky, Mississippi, Tennessee. Overnight Travel is required for this position. Company vehicle will be provided. A Note to U.S. Veterans:Experience gained through military service in mechanical, electrical, or maintenance roles is highly valued and may be considered equivalent to civilian trade experience. We welcome Veterans to apply and bring their mission-ready expertise to our team. Responsibilities: • Primary focus on chiller and boiler plants, • Responsible for servicing products and equipment on assigned projects, • Performs repairs, overhauls, and start-ups of commercial HVAC systems, • Uses a variety of hand tools, following blueprints, wiring diagrams, piping schemes or engineering specifications, to diagnose and repair units, • Performs preventative maintenance, troubleshooting and diagnostics, replacement, and modifications as needed, • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work as necessary., • Documents work by completing paperwork on each job and maintaining files., • Keeps current all manufacturers' products concerning installation, operation, maintenance, service, and repair, • Provides technical support to management, • Flexibility to work on other assigned tasks as required, such as kitchen equipment refrigerators/freezers, minor plumbing, minor electrical, etc. Requirements: • 5+ years of service experience, • HVAC trade school certification or apprenticeship program or an acceptable equivalent, • Valid driver's license with clean drivers record, • Must be able to pass Federal background Check and 10 Panel Pre-Employment Drug Screening, • EPA Approved Universal Technician Certification, • Low Voltage Electrical Certification preferred, • Veterans Encouraged to Apply: Enviremedial Services proudly supports our nation's Veterans and values the skills gained through military service. Relevant military experience may be considered equivalent to industry-specific experience, particularly in technical, leadership, or maintenance-related fields. We strongly encourage qualified Veterans to apply. Company Sponsored Benefits: • Enviremedial Services, Inc. is an Employee Owned Company. Often referred to as an ESOP, an ESOP is similar to a Profit Sharing Plan which allows the Sponsor to contribute not only cash, but also its own stock for the benefit of participating employees. ESI established the ESOP to enable employees to accumulate a beneficial ownership interest in the stock of ESI, which is not publically traded, and to share in the potential growth and profits of ESI. Please note that the ESOP does not provide voting rights to any shares allocated to the employee., • Eligibility To become eligible to participate in the ESOP the employee must have attained the age of 21. An eligible employee who has worked at least 1,000 hours in a 12-month period beginning on their date of hire will become a "Participant" in the plan on the first January 1 or July 1 after the end of the 12-month period., • Vacation - Effective immediately, • 0-3 years of service: 80 Hours - 10 days each year, • 4-5 years of service: 96 Hours - 12 days each year, • 6+ years of service: 120 Hours - 15 days each year, • Sick Pay Max Accrual of 56 hours per year Accrual begins immediately upon hire., • Per Executive Order (EO) 13706 Employees will accrue (earn) not less than one (1) hour of paid sick leave for every thirty (30) hours worked on or in connection with a covered contract, up to a maximum of fifty-six (56) hours., • Twelve (12) Predetermined Holidays - Effective immediately, • ESI 401(k) Plan- 25% Discretionary Employer Match Effective after 90 days, • Health, Dental, Vision, Life, and Long Term Disability Insurance -Effective on the first of the month following 60 days of employment. Enviremedial Services Inc. Pays approximately 90% of Employee only coverage and competitive percentages of dependent coverage., • Immediately upon hire, a fringe benefit of $5.09 per hour (for all regular time up to 40 hours per week worked on SCA Contracts), will be paid into a 401(k) in your name. Once health insurance selections become effective the fringe benefit amount will change depending upon the level of insurance you select. Affirmative Action Statement: It is the policy of Enviremedial Services, Inc. to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law. This policy relates to all phases of employment, including, but not limited to, recruiting, employment, placement, promotion, transfer, demotion, reduction of workforce and termination, rates of pay or other forms of compensation, selection for training, the use of all facilities, and participation in all company-sponsored employee activities. Provisions in applicable laws providing for bona fide occupational qualifications, business necessity or age limitations will be adhered to by the company where appropriate. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Company truck, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • Monday to Friday, • Overtime Supplemental Pay: • Overtime pay, • Signing bonus Work Location: On the road Enviremedial Services, Inc. is committed to maintaining the highest standards of safety and security for our employees, clients, and the communities we serve. In alignment with the requirements of our government contracts, all employees who work on these contracts must successfully undergo a background check and drug test.

Job Description Tool Technician We are seeking a dedicated and skilled Tool Technician to join our night shift team. This role specializes in the calibration, repair, and troubleshooting of specialized manufacturing equipment, precision tools, and control systems, with a strong focus on injection molding operations. The successful candidate will play a critical role in ensuring machinery runs safely and efficiently across industrial plants, minimizing production downtime. What's in it for you? Elwood Staffing associates are eligible for a comprehensive and competitive benefits package plus an exclusive savings program, including: • Medical/Vision/Dental/Rx plans, • Holiday Pay, • Teladoc (online care), • Referral Bonus Incentive, • Weekly Pay, • 401k, • And More! Tool Technician Details: • Temp-to-Hire position, • $23.00 to $26.00 /hour, • Full Time work available, • Third Shift (Monday through Friday from 06:00pm to 06:30am), • Perform calibration, repair, and troubleshooting of specialized manufacturing equipment, precision tools, and complex control systems., • Conduct testing and adjustment of devices that monitor critical parameters such as pressure, temperature, and electrical load., • Diagnose complex malfunctions in hydraulic, pneumatic, and automated systems utilizing diagnostic software and precision hand tools., • Dismantle equipment, replace defective parts, and meticulously document all maintenance and repair activities., • Apply expertise in injection molding processes, molded part feasibility, and tool build/design principles., • Work with and maintain various injection molding equipment, robotics, and auxiliary systems., • Demonstrate proficiency with diverse injection molding tool technologies including, but not limited to, RPT, Aluminum, P-20, mold max, cooling and turbulent flow, tool shot, and in-mold formed laminates. Tool Technician Qualifications: • 1-3 years of proven tooling/technical experience, preferably within a manufacturing environment., • 1-3 years of experience within the automotive industry., • Prior experience in industrial maintenance., • Familiarity with robotics in a manufacturing setting., • Strong understanding and experience with plastic injection molding processes., • Applicant may be subject to a background check, • Pre-employment drug screen (Excluding THC) is required as a condition of employment We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. Our commitment to you: to be Kind, Helpful, Respectful, Honest and Committed To Finding You Work. : Visit, email, call, or text us today! Walk-ins are welcome! ! Chattanooga, TN 3261 Perimeter Dr Chattanooga, TN 37421 *Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles Country Fair Chance Ordinance for Employers and the California Fair Chance Act. *See above for qualifications #IJ #ZR

Job DescriptionBenefits: • Bonus based on performance, • Employee discounts, • Training & development Benefits/Perks • Continuing education through company-sanctioned events., • Free membership in a state-of-the-art facility.D1 is an athletic-based group training facility for adults and youth athletes ages 7 and up with a mission of providing the best fitness philosophy and facility to its athletes, empowering them to improve themselves by efficiently and consistently reaching their fitness goals. At D1, our promise to our athletes is: You pick the goal, we help you get there and D1 Coaches are the catalysts for our fulfillment of that promise. D1 Coaches implement and instill the D1 training philosophy into every workout. They exhibit the ability to adapt and customize programs in the workouts, in order to tailor them to each athlete. They take a personal stake in the lives of our athletes, maintaining regular contact and monitoring their individual progress toward their goals. D1 Coaches are a part of the best training environment in the industry and are integral to the success of D1 as it continues its rapid growth. Company Overview • Motivate and inspire all to be their best and achieve their goals through training with world-class coaches., • The culture of D1 separates us as we are all driven to help those around us., • D1 is passionate about impacting and changing lives.Job Summary, • Foster a positive, motivating environment for all athletes., • Maximize client retention through best-in-class service: coaching, training, nutrition, and accountability., • Modify and adapt movements that are best suited for the individual at hand., • Teach, • A D1 Coach must be dedicated to training and improving the lives of D1s members Scholastic (ages 7-18), Adults, and Teams, by:, • Exhibiting passion, expertise, high energy, a positive and motivating attitude, strong character, and over-the-top customer service, • Starting and finishing workouts on time, • Assessing and aligning each member with the proper program, • Building and maintaining relationships with each D1 member, • Coaching group workouts, personal training, and teams, • Delivering accurate, industry-leading educational advice on strength, speed, and nutrition, • Teaching proper form and technique and keeping all our athletes safeResponsibilities, • Foster a positive, motivating environment for all athletes., • Maximize client retention through best-in-class service: coaching, training, nutrition, and accountability., • Modify and adapt movements that are best suited for the individual at hand., • Reduce an athlete's risk of injury by focusing on proper technique and movement patterns.Qualifications, • Has a valid AED/CPR/First Aid certification, • Minimum of 1 year of strength & conditioning-related experience in group, team, or personal training setting., • Has a bachelor's degree in Exercise Science or a related field (preferred).

Job DescriptionAPPLY USING LINK BELOW https://recruiting.adp.com/srccsh/public/RTI.home?r=5001212053200&c=2211139&d=ExternalCareerSite&_dissimuloSSO=ZJVlB6ETJPw:DxmgebSXy6lsSSyBKbVDFixdUM6zmV5Eeu5E49m2h9w Merchandiser Our merchandisers are the heart and soul of Jacent. They're on the front lines in more than 17,000 stores placing just the right products, building displays, and working with store personnel -- right in their own community. Our people are what makes us special and makes us the #1 impulse merchandising company in North America. We are looking for individuals that align with our culture pillars of We Always Play Offense, We Are Solutions Oriented, We Deliver Legendary Service, We Act with Integrity and Courage, and We Are Stronger Together. Why Jacent? • $15-18/HR, • Daytime hours and a predictable schedule, • 15 HOURS PER WEEK, • Paid training, • Mileage and travel time paid between stores, • Cell phone reimbursement, • Advancement opportunities Who We're Looking For • A self-starter and quick learner who enjoys working both independently and in a team setting, • Someone who is comfortable in changing environments, • Someone who is able to meet the physical requirements of the role, with or without a reasonable accommodation, which include:, • Standing and walking 3-8hrs, • Lifting up to 50 lbs, • Crouching, bending, twisting, and repetitive hand movements, • Possesses excellent organizational skills, • A strong communicator with the ability to build relationships with business partners., • Resides within 20 miles of Chattanooga/ East Ridge/Hixson, TN/ Fort Oglethorpe, GA What You'll Be Doing • Cultivating relationships with in-store management, • Executing merchandising resets, • Building retail displays, • Merchandising impulse items on clip strips & J-hooks, • Implementing plan-o-grams Check out this video to learn more! A Day in the Life of a Jacent Merchandiser Who We Are Jacent is the leading cross-merchandising impulse product company in North America and offers multiple solutions to make the challenging world of retail easier. We are strategic merchandising experts. With our data driven insights and complete line of impulse products, we enable inspired shopping experiences -- and increased sales. Jacent sources shopper-inspired products, and blends data and experience to help retailers design and manage strategic merchandising programs. With our 2,500+ merchandising employees, we then provide the merchandising for more than 17,000 stores to maximize sales. EOE Statement The Company will make all employment decisions regarding employees and applicants for employment without discrimination or harassment based on race, color, religion, gender, national origin, sexual orientation, age, disability, pregnancy, marital status, veteran status, alienage or citizenship status, creed, genetic predisposition or carrier status, status as a victim of domestic violence, or any other category protected by federal, state, or local law. Powered by JazzHR fsniDlQVaI

Job Description Floating Hamilton County C&Y Customer Service and Benefits Specialist Help Others, Make a Difference, Save a Life. Do you want to make a difference in people's lives every day? Or help people navigate the tough spots in their life? And do it all while working where your hard work is appreciated? You have a lot of choices in where you work…make the decision to work where you are valued! Join the McNabb Center Team as the Floating Customer Service and Benefits Specialist today! The Floating Customer Service and Benefits Specialist Duties: • Coordinates arranged meet ups with McNabb Mail Currier to hand off Hamilton County mail from all locations in Hamilton County (Mondays and Wednesdays)., • Greets clients, visitors, and guests; determines the purpose of each person's visit and directs or escorts to appropriate location., • Assists client in completing NHSC application., • Monitors front desk and complies with all security procedures., • Answers, screens, and directs phone calls to staff; takes messages and schedules/cancels appointments accordingly., • Receives mail, documents, packages, and courier deliveries and distributes items., • Performs administrative and clerical support tasks., • Performs basic filing and record keeping., • Performs other duties as needed. JOB PURPOSE/SUMMARY • This position will float to Hamilton Adult Clinic covering lunch and or admissions for client benefits staff if on vacation, sick leave or FMLA., • This position will travel to the McMinn Clinic on designated days to coordinate arranged meet ups with McNabb Mail Currier to hand off Hamilton County mail from all Hamilton locations, pick-up and carry messages, documents, packages, and other items between offices or departments within the organization., • This position requires utilizing a personal dependable vehicle to conduct center business. Maintaining a dependable vehicle and certified driver status is a condition of employment. You will utilize your personal vehicle when traveling with interoffice mail and you will receive paid mileage., • The position works directly with clients in the process of registering, assessing client's eligibility for services, and maintaining current insurance eligibility and payer information., • Also responsible for obtaining co-payment and/or cash collections of deductibles according to policy and procedure., • Performs quality customer service and support for clients, center workforce and other professionals., • Greets clients and visitors upon arrival at clinic and determines reason for visit., • Other job duties include, but are not limited to: answering phones and emails, entering information into database, making copies, organizing files, making copies, scheduling, rescheduling, and canceling appointments, taking inventory and ordering office supplies for client benefits., • We prefer candidates who have some experience in an administrative role and clinical setting, but are willing to train the right individual. TYPICAL WORKING CONDITIONS/ENVIRONMENT • This position operates in an outpatient clinical setting. JOB DUTIES/RESPONSIBILITIES This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based on their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. 1. Admissions Data Entry • Ensures each client is eligible for the services they are receiving at time of service., • Checks daily intake sheets for missing insurance cards and notifies staff., • Works with HIM staff to insure proper training on release of information policies and works with Compliance Officer on HRMC P&P., • Creates medical record number for clients including the phone number as well as completes data entry of demographic information without duplication of data., • Receives cash payments from clients, staff and other programs; writes receipt., • Turns in cash and copy of receipt to the appropriate financial services staff within 2 business days., • Working knowledge of the scheduler for checking in and out clients. 1. Patient Eligibility • Checks online with state website to ensure clients are covered, if providing state or government insurance at time of service., • Sets up each intake in Centricity and makes a file folder with intake packet., • Keeps clients medical record up to date with demographic information when changes are needed. 1. Administrative Duties and Expectations • Responds to emails and voicemails within 1 business day., • Submits timesheet and other paperwork accordingly., • Keeps productivity to at least 95% accurate without errors., • Attends scheduled meetings., • Completes CARF required self-directed Relias Training Modules on time annually., • Responsible for ensuring orderly, efficient front office operations., • Arrives to work at scheduled time without tardiness., • Ensures the clinic is opened and closed at designated times., • Backup for front desk, Program Assistant/Client Benefits Specialist at Hamilton Adult and CY Clinic when needed for intakes and front office duties. COMPENSATION: • Starting salary for this position is approximately $17.43/hour based on relevant experience and education. Schedule: • Required work schedule is Monday through Friday, 8AM-5PM with 1 hour break. If ever irregular work schedule arises, supervisor will notify staff ASAP. Travel: • This position will travel to the McMinn Clinic on designated days to coordinate arranged meet ups with McNabb Mail Currier to hand off Hamilton County mail from all Hamilton locations, pick-up and carry messages, documents, packages, and other items between offices or departments within the organization., • This position requires utilizing a personal dependable vehicle to conduct center business. Maintaining a dependable vehicle and certified driver status is a condition of employment. You will utilize your personal vehicle when traveling with interoffice mail and you will receive paid mileage. Equipment/Technology: • Position requires the use of center computer, center phone and fax machine. QUALIFICATIONS - Floating Customer Service and Benefits Specialist Experience / Knowledge: • Prior administrative or clerical experience preferred., • Must have experience working with computers and technology., • Highly organized and able to multitask while working in fast paced environment while prioritizing tasks., • Excellent customer service skills., • Excellent time management and communication skills, both written and verbal., • Knowledge of client needs and clinical workflow according to client benefits position., • Maintaining most recent insurance eligibility information., • Willingness to learn and implement policy and procedures., • Able to work well within a team and independently. Education / License: • High School Diploma or equivalent. Physical/Emotional/Social - Skills/Abilities: • Exposure to biological hazards., • Hearing of normal and soft tones., • Normal/Corrected Eyesight, • Lifting up to 50 lbs., • Pushing/pulling up to 150 lbs., • Frequent sitting, standing, walking, bending, stooping, and reaching., • Active Driver's License, • Position requires yearly Verbal Handle with Care (HWC) training provided by McNabb. Location: Hamilton County, Tennessee Apply today to work where we care about you as an employee and where your hard work makes a difference! Helen Ross McNabb Center is an Equal Opportunity Employer. The Center provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment. Helen Ross McNabb Center conducts background checks, driver's license record, degree verification, and drug screens at hire. Employment is contingent upon clean drug screen, background check, and driving record. Additionally, certain programs are subject to TB Screening and/or testing. Bilingual applicants are encouraged to apply. Compensation details: 17.43-17.43 Hourly Wage PIb6d88ab41d1e-25405-41011033

Job Description Are we the road to your future? We are currently seeking an experienced Bridge Inspector to support our Gulf Region, with work based in Mississippi and/or Tennessee. In this role, you’ll perform bridge safety inspections and support the development and review of inspection reports. You’ll work both in the field and the office, traveling to various structures to help ensure the safety and integrity of critical infrastructure. What you’ll be doing: • Perform inspections on structures ranging from culverts to large, complex bridges and ancillary structures (signs, light poles, traffic signals), • Document findings and assist in developing detailed inspection reports, • Review inspection data and reports for accuracy and completeness, • Complete office tasks including report writing, data entry, and documentation What you need to have: • Ability to travel, including overnight stays as needed, • Ability to climb ladders and work at heights, • Proficiency in Microsoft Word and Excel, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Bachelor’s degree in Civil or Structural Engineering, • EI (Engineer-in-Training) certification, • 1+ year of bridge and/or ancillary structure inspection experience, • Knowledge of national bridge inspection standards and reporting practices, • Successful completion of FHWA/NHI Safety Inspection of In-Service Bridges training Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI Mississippi Tennessee

Job Description Are we the road to your future? We are currently searching for an experienced Traffic Project Engineer to support our Gulf Region located in Brentwood/Nashville, Knoxville, or Chattanooga, TN. Candidates must be willing to relocate to Tennessee if out of state. To be considered for this position, applicants must have, at minimum, 8 years relevant experience in traffic engineering. What you’ll be doing: • Prepare technical reports for traffic impact studies, interchange access requests, or safety studies, • Prepare and management the development of traffic impact studies, land use planning, master plan studies, traffic signal warrant studies, bikeway planning and design, community and campus planning, technical report writing, • Prepare traffic signal design plans for new intersections and signal modifications to facilitate multimodal accommodations, • Prepare temporary traffic control plan/traffic management plan (TMP) and signing, pavement marking plans, • Prepare Intelligent Transportation System (ITS) design plans, • Assist in preparing conceptual intersection layouts, schematics, signal timings and engineering reports, • Assist with and prepare roadway design plans, • Leading or assisting in the development of project designs and directing EIs to successfully execute and deliver project work, while implementing client focused strategies, • Aspires to work in a team environment and is willing to participate in business development efforts and meetings with clients., • Participates in ongoing development, communication and implementation of team concepts, programs and policies. Coordinates work to ensure best practices with all team members, • Attends appropriate team meetings, • Work on detailed engineering assignments including calculations and relatively standard work activities, • Adjusts and correlates data, recognizes discrepancies in results, • Identify and analyze problems using reasoning to arrive at conclusions, • Apply standard practices and techniques to accomplish work assignments, • Understands and adheres to assigned phase and task schedules and budgets to ensure timely and cost-effective completion of project, • Adheres to company standards for quality assurance and quality control as defined in the quality manual What you need to have: • BS in Civil Engineering from an accredited four-year college or university, • 8-12 years relevant experience in traffic engineering, • TDOT experience is preferred but not required, • PE is required (Tennessee PE preferred), • PTP or PTOE is desired but not required, • Must have proven skills in meeting DOT expectations, schedules and budgets, • Knowledge in transportation planning, including comprehensive corridor analysis, DOT local programs, public involvement, safety and access, pedestrian and bicycle planning, multimodal planning and traffic operations, • Familiarity with DOT traffic design standards, MUTCD and AASHTO, • Proficiency in traffic analyses software such as VISSIM, Synchro/Simtraffic, Sidra Intersection, HCS, • Proficiency with OpenRoads Designer desired but not required, • ITE membership will be preferred, if not already a member, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 Tennessee

Job Description All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: • Trustworthy – We strive for our actions to match our words in all our relationships., • Servant – Hearted – We enable and empower our team to serve the needs of our customers, team members, and community., • Relational – We build healthy relationships while fostering an environment of compassion, balance, accountability, and personal and professional growth., • Resourceful – We value strategic insourcing, first looking to create solutions internally, and then looking to apply that knowledge to future opportunities. PRIMARY RESPONSIBILITY: The Cutter Operator will lead and assist the team in safely setting up, maintaining, and operating the machine(s) to acquire quality product while maximizing throughput. They will also define problem statements, conduct root cause analysis, and troubleshoot mechanical issues that occur on the machine. The Operator will escalate unresolved issues to the Lead Operator or Maintenance, while remaining available to assist in order to build their capabilities in the resolution of the issue. *In order to fulfill the requirements for the Cutter Operator, team members must demonstrate proficiency in the roles and responsibilities of a Cutter Apprentice and Production Assistant. ADDITIONAL RESPONSIBILITIES: • Review job tickets to determine components, settings, and adjustments, for cutting machines, • Examine and measure materials to verify conformance to specifications, using measuring devices such as rulers and micrometers. Verify setups and make necessary adjustments., • Adjust controls to alter position, alignment, speed, or pressure., • Maintain robotic equipment or related automated production systems. Modify computer-controlled robot movements based on job (Centre South only), • Work with robotic tech to make sure the Axium is set up for the upcoming job and assist the robotic tech during any issues with the Axium throughout the run (Compress location only)., • Maintain production records, such as quantities, types, and dimensions of materials produced, • Removed defective or substandard materials from machine and readjust machine components so that products meet standards., • Move stock or scrap to and from machines manually or by using carts, hand trucks or lift trucks, • Change or replace knife, scaring rule and rubber, using hand tools and adhesives. Additionally ensure all waste is appropriately segregated by board type, • Spend daily, intentional time with team members to know and serve them, encouraging their growth and development and providing regular feedback on their progress in training, • Own your personal safety and that of all SCT team members by identifying, correcting, and escalating any safety hazards.), • Own the quality of our product, escalating and/or solving issues identified, while developing quality awareness in team members, • Proactively communicate and collaborate with all team members (on and across shifts), Supervisor, Mechanic, and the SCT team at large., • Maintains a clean work environment in accordance with Food Safety, Kanban and 5S systems, • Adapts to Continuous Improvement and follows new procedures and innovations, which would add to the efficiency and safety of the operation, • Coordinate with Lead Operator to effectively utilize team members during machine downtime (not including approved breaks) to maintain a clean and safe work area, develop your team in areas defined by the standard work practice, or support another area in need, • Flow to the work or need of the site with positivity, occasionally performing a different job or supporting a different department based on production needs (Ownership/Servant-hearted), • Serve as a backup to the Lead Operator in their absence Perform preventative maintenance tasks as scheduled by clean and lubricate cutting machine, conveyors, bundler, labeler, automation using compressed air hoses, scrapers, brushes and other greases/lubrications AUTHORITY: The Cutter Operator must have the ability to lead those assigned to their team to execute the demands of the gluer operation efficiently and to respond to verbal instructions from the Lead Operator or Supervisor and other written instructions. QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or two to three years of related experience and/or training; or equivalent combination of education and experience. Must have basic computer skills and possess ability to utilize software. Must have mechanical ability and skills. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. Night Shift (3 Day/12 Hour) - 6:25 PM to 6:35 AM EST - Orange Team Amnicola Plant - 2601 Riverport Rd, Chattanooga, TN 37406

Job DescriptionReady to keep high-speed molding lines running at their best? If you thrive on solving complex machine issues and preventing downtime, this opportunity at Novolex could be a match. We’re a leader in food, beverage, and specialty packaging across foodservice, delivery/carryout, processing, grocery/retail, and industrial sectors. Our footprint spans resin, paper, molded fiber, aluminum, and more—supporting 120 product categories, 250 brands, and 39,000+ SKUs. What You’ll Do • Perform precise mold changeovers., • Troubleshoot electrical, pneumatic, hydraulic, and mechanical systems using diagrams, OEM manuals, and engineering specs., • Disassemble/replace faulty parts with hoists, hand tools, and power tools; assess form/texture to validate wear., • Measure and verify tolerances with rules, calipers, and micrometers., • Execute preventive maintenance and thorough cleaning on equipment., • Maintain strict compliance with OSHA, Federal, Local, and plant safety standards., • Apply hands-on knowledge of plant utilities like chillers and compressors., • Report mold/equipment defects to leadership promptly., • Document actions, anomalies, and follow-ups to ensure seamless shift-to-shift continuity., • Complete assigned training requirements., • Support additional maintenance tasks as assigned.Must-Have Qualifications, • High School Diploma or equivalent plus technical training., • Minimum 4 years in a maintenance mechanic/technician role within manufacturing., • Forklift operation experience., • Clear English communication (written/verbal) and computer literacy for documentation., • Personally supplied maintenance tools., • Ability to lift up to 50 lbs., • Availability for overtime, including weekends, as required.Technical Strengths, • Mechanical Troubleshooting Skills, • 120/208/240/480 Voltage Systems, • Electrical Troubleshooting, • High Voltage Systems, • Maintenance and Repair SkillsTools & Controls You’ll Encounter, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Fanuc, Allen Bradley, Siemens, Sigmatek), • Conveyor Systems, • Servo MotorsCompensation The reasonable hourly range for this position is $26.00–$28.00. Final compensation is determined by a variety of factors such as your skills, experience, training, certifications/licensure, and current business needs. It is uncommon for offers to land at the top of the range; each decision reflects the specifics of the case. Why NovolexSustainability Our sustainability strategy rests on three pillars—products, operations, and people—fueling wide-ranging initiatives that advance our business and the communities we serve. Benefits We prioritize safety and total well-being. You’ll find competitive medical, dental, and vision coverage plus programs that support mental, physical, and financial health. Benefits may vary by location. Community Engagement Through our Focused Giving Program, we support organizations focused on sustainability and on addressing food and hunger challenges. We also encourage facility-level community involvement. Learning & Advancement Grow with ongoing skills development through MyLearning, industry training curricula, a Learning Management System, and Tuition Reimbursement Program (Non-Union). Compliance Notices Novolex is committed to providing equal employment opportunity in all employment practices, including but not limited to selection, hiring, promotion, transfer, and compensation to all qualified applicants and employees without regard to age, race, color, national origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law. Any individual who, because of his or her disability, needs an accommodation in connection with an aspect of the Company's application process should contact myHRservices@novolex.com. • Eligible to work in the United States, • Successful completion of pre-employment background and drug screen Formerly Pactiv Evergreen

Job DescriptionSalary: Competitive Pay Based on Experience The Stadium Corporation is the operating entity of Finley Stadium Davenport Field, the First Horizon Pavilion, and surrounding property. Home to Chattanooga Mocs Football, the Chattanooga Football Club, and the Chattanooga Market, the campus hosts 500,000+ visitors and over 200 events annually. Opened in 1997 as a public-private partnership, Finley Stadium has also hosted the FCS National Championship, US Soccer National Teams, TSSAA Football Championships, concerts, and numerous local and regional events. Our Core Values are Put People First and Continuous Improvement. Role Reporting to the Facility Manager and Assistant Manager, theFacilities Crew supports all aspects of facility maintenance and event production. This is a part time seasonal position, with the potential to transition into a full time with benefits position. Responsibilities Be able to perform physically demanding work for the duration of the work day. Operate pressure washers, leaf blowers, hedge trimmers, backpack blowers, line trimmers, utility vehicles, small power and hand tools. Perform janitorial tasks and clean up Participate in the operation, maintenance and repair of diverse facility equipment which may include commercial kitchen equipment, door/lock repair, minor painting, phone cabling, carpentry and general duties as assigned that utilize basic mechanical aptitude. Perform minor plumbing, electrical, and mechanical repairs. Follow all company safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Perform event related duties, set-ups and coverage for functions as assigned. • Provide excellent customer service assistance to internal and external clients., • Other duties as assigned. Qualifications High school diploma (or equivalent) required. Ability to learn facility maintenance and mechanical skills. Ability to lift and carry packages or materials up to 75 pounds. Exceptional people skills, and practices the core value of Put People First. Experience in operating light machinery and working at heights. Forklift certification a plus. A willingness to be hands-on, learn building skills, and make decisions when Facilities lead on-duty. Ability to work independently or within a team. Be self-motivated and be able to stay on task Personable, Detail-oriented, Self-starter, Problem-solver, Team player, and ability to present information to internal and external clients. Must be available to work nights, weekends.

Job Description Roofing Materials Sales Representative Commission-Based | Full-Time About the Role We're looking for a driven, industry-savvy sales professional to join our team selling roofing materials to contractors, builders, and distributors. This is a commission-based position with uncapped earning potential — the right person can build a serious book of business fast. What You'll Do Prospect and develop relationships with roofing contractors, builders, and supply houses in your territory. You'll manage the full sales cycle from first contact through close, handle account follow-up, and stay ahead of project pipelines. You'll also represent the company at trade events and job sites as needed. Who We're Looking For The ideal candidate has existing relationships in the roofing or construction materials space and knows how contractors think and buy. You're self-motivated, comfortable working independently, and you don't need hand-holding to hit your numbers. Specific experience selling roofing materials, shingles, underlayment, metal roofing, or related products is a strong plus. Requirements • 2+ years of sales experience, ideally in roofing, construction materials, or building products, • Existing contractor or trade relationships strongly preferred, • Strong communication and follow-through, • Reliable transportation and willingness to be in the field, • Ability to read and interpret basic project specs is a plus Compensation Commission-based with significant upside for top performers. The territory has strong existing demand and room to grow — this is an opportunity to build something, not just maintain it. Company DescriptionFastest Growing Roofing Supply House in town!Fastest Growing Roofing Supply House in town!

Job Description Are we the road to your future? We are currently searching for an experienced Traffic EIT to support our Gulf Region located in Brentwood/Nashville, Knoxville, or Chattanooga, TN. Candidates must be willing to relocate to Tennessee if out of state. What you’ll be doing: • Assist with preparation of technical reports for traffic impact studies, interchange access requests, or safety studies, • Assist with development of traffic impact studies, land use planning, master plan studies, traffic signal warrant studies, bikeway planning and design, community and campus planning, technical report writing, • Work on temporary traffic control plan/traffic management plan (TMP) and signing, pavement marking plans, • Work on traffic signal design plans for new intersections and signal modifications to facilitate multimodal accommodations, • Assist in preparing conceptual intersection layouts, schematics, signal timings and engineering reports, • Assist with and prepare roadway design plans, • Attend project meetings with clients, • Learn project budgets to meet financial metrics, • Potential to learn and participate in business development activities, • Performs other duties as assigned What you need to have: • BS in Civil Engineering, • EIT (E.I) Certification is preferred, • 2 - 4 years of experience, • Experience with transportation planning, including comprehensive corridor analysis, local programs, public involvement, safety and access, pedestrian and bicycle planning, multimodal planning and traffic operations are desired but not required, • Familiarity with DOT traffic design standards, MUTCD and AASHTO, • Familiarity with traffic analyses software such as VISSIM, Synchro/Simtraffic, Sidra Intersection, HCS are desired but not required, • Experience with OpenRoads Designer is desired but not required, • Self-starter and capable of completing tasks with minimal oversight, • Ability to communicate effectively, both orally and written, • Willingness and motivation to curate and eventually develop personal client base, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 Tennessee

Job Description TIG Isuzu Trucks of Chattanooga, Tennesse is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job DescriptionCommercial Concrete Laborer. Responsibilities: • Perform general construction labor to include jobsite clean-up and moving of materials by hand., • Operating motorized equipment including power tools, saws, hammers, nails and bolts., • Work requires alert individuals with good balance and physical strength., • Assist in pouring of concrete., • Install reshores per instructions., • Working during inclement weather, could be exposed to extreme cold and heat, noise and dust from construction operations depending upon project site. Preferred Qualifications: • Experience in construction or contracting industry., • Excellent written and verbal communication skills., • Strong analytical and critical thinking skills., • Strong attention to detail. Working Conditions: • Must be able to stand, stoop, bend, and crouch for extended periods of time up to ten (10) hours per day., • Ability to lift up to 50 lbs, carry forms., • Must work safe at all times., • Exposure to the elements heat, cold, rain, wind.

Job Description Club Pilates is actively seeking Certified Pilates Instructors to join our growing family. We believe that Pilates is the path to a fuller, more satisfying physical existence. We believe that being in control of your body helps you to be in control of your life. And best of all, we believe that you can start anytime. POSITION: The ideal candidate will have a passion for Pilates and helping others improve their lives through health and fitness. If you are a professional Pilates instructor who is energetic, friendly, willing to learn, build relationships with potential and existing clients, sell classes and lead dynamic apparatus focused workout routines (we use Balanced Body reformers, EXO chairs, TRX, spring boards, ballet barre and more), you’ll be a great addition to our team. We are looking for instructors with confidence in working with all level of clients to provide challenging, fitness-based Pilates classes in a safe manner. Club Pilates offers blocked scheduling and shifts, the ability to teach multiple level classes, club membership, continuing education, employee status (not independent contractor), room for growth and a supportive & fun environment! REQUIREMENTS: • Current full apparatus Pilates Certification with 450 hours of experience or equivalent, • Experience teaching group classes, • Ability to demonstrate effective group reformer instruction, • Energetic, positive and motivational teaching style, • Capable of using a contemporary approach to classical exercises, • Punctual, reliable and dedicated, • Desire to build a successful business in an entrepreneurial environment, • Focus on customer service, including professional and effective communication skills, • Experience with club management software and/or the ability to learn new systems (e.g. Club Ready) RESPONSIBILITIES: • Providing Pilates group reformer classes pursuant to Club Pilates standards, • Instructing clients (up to 12 clients per class) using proper form and safe methods on a variety of equipment including, but not limited to, Reformer, Springboard, Exo-Chair, hand weights, etc. to ensure a safe, yet creative experience, • Conducting private, semi-private, demo or other additional sessions as needed, • Visually inspecting the equipment prior to each class to ensure it is in good working order and safe to use, • Maintaining a clean and orderly workout environment, • Assisting with membership sales and checking clients in, • Building studio revenue by promoting retail and membership sales & services, • Being a motivating and inspiring force to promote our motto: Do Pilates. Do Life. COMPENSATION & BENEFIT • This position offers a very competitive Hourly Rate, plus Seat pay and commission, • Unlimited growth potential as well within the company., • 50% off retail Powered by JazzHR 26rsS5pjmm

Job DescriptionAre we the road to your future? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. We are currently searching for an experienced Senior Roadway Engineer/Project Manager to support our Gulf Region located in Mississippi and/or Tennessee. Candidates should be based in or open to relocating to Mississippi or Tennessee. What you’ll be doing: • Provide plan review and project management for DOT and local municipal projects, • Coordinate project activities, schedules, and reporting for assigned work, • Prepare, issue, and track project documentation, including contracts, change orders, and client approvals, • Develop correspondence and documentation for clients, vendors, and regulatory agencies, • Support project financial processes, including invoices and purchase orders, • Prepare and edit meeting minutes, reports, and presentations, • Assist with project submittals and bidding activities, • Provide technical and administrative support to the project team, • Support client relationships and contribute to business development with local municipalities What you need to have: • BS in Civil Engineering from an accredited four-year college or university, • 10+ years of experience in roadway design, • Previous DOT experience, • Professional Engineer (PE) license, • Proven ability to meet DOT standards, schedules, and budgets, • Proficiency in OpenRoads (Geopak experience preferred), • Strong knowledge of DOT design methods, standards, and specifications, • Demonstrated experience managing medium to large, multi-office, or concurrent projectsAbility to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • Proven leadership, mentoring, and client management experience Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Mississippi MS Tennessee TN #LI-SD1

Job Description Position: Director of Business Development Reports to: VP of Sales and Preconstruction Department: Sales Status: Full-Time Position – Exempt/Salary Position Value Proposition As the Director of Business Development, you will be responsible for revenue generation and increasing the profitability of the organization through strategic sales initiatives and marketing plans. Carrying out the company’s overall mission and growth plans, this position will work with the VP of Sales and Preconstruction to create and oversee the execution of revenue streams for future profitable growth. Core Responsibilities • Enact strategy and sales initiatives to support company objectives., • Foster strong relationships with existing and potential customers including internal department heads and team members., • Works closely with the VP to execute the company’s sales strategy for their region., • Develop and execute a Market Strategy that leverages the strengths of the organization., • Identify competitive advantages and new markets for future sustainable growth., • Self-driven individual who has the drive to achieve company performance goals and sales targets., • This position requires a minimum of 50% travel within the set territory. Required qualifications (Knowledge, Skills, and Abilities) to perform essential functions of this position Core Competencies: • Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customers; gets first-hand customer information and uses it for improvements in products and services; acts with customers in mind; establishes and maintains effective relationships with customers and gains their trust and respect., • Business Acumen - Knows how businesses work; knowledgeable in current and possible future policies, practices, trends, technology, and information affecting his/her business and organization; knows the competition; is aware of how strategies and tactics work in the marketplace., • Time Management - Uses his/her time effectively and efficiently; values time; concentrates his/her efforts on the more important priorities; gets more done in less time than others; can attend to a broader range of activities., • Negotiating - Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be direct and forceful as well as diplomatic; gains trust quickly of other parties to the negotiations; has a good sense of timing., • Integrity and Trust - Is widely trusted; is seen as a direct, truthful individual; can present the unvarnished truth in an appropriate and helpful manner; keeps confidences; admits mistakes; doesn't misrepresent him/her self for personal gain., • Listening - Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees., • Perseverance - Pursues everything with energy, drive, and a need to finish; seldom gives up before finishing, especially in the face of resistance or setbacks., • Presentation skills - Is effective in a variety of formal presentation settings: one-on-one, small and large groups, with peers, direct reports, and bosses; is effective both inside and outside the organization, on both cool data and hot and controversial topics; commands attention and can manage group process during the presentation; can change tactics midstream when something isn't working, • Decision Quality - Makes good decisions (without considering how much time it takes) based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions., • Drive for Results - Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes themselves and others for results. Work Experience Minimum of 10 (10) years of experience developing and managing new business within the construction industry, specifically in the Pulp and Paper and the Power sectors. Education/Training Bachelor’s Degree preferably in Business, Marketing or Engineering. Additional years of experience may substitute a bachelor’s degree. Specialized Knowledge – Certificates & Licenses As outlined in the Core Competencies, an individual must have thorough knowledge and an advanced understanding of each competency outlined above in order to carry out the essential functions of this position. Specialized Knowledge is also required in the following areas: • Business development within the Industrial Construction Industry; Knowledge of building concepts and principles., • Public Speaking/Presentation Skills Software & Technology Position will require experience with and the frequent use of CRM Systems, MS Windows, MS Word, MS Excel, MS Outlook. Use of Concur Software for expenses and other software will be required (training will be provided). Work Environment Position requires frequent out of state air/road travel as needed and required. A clean driving record will be required due to required road travel. Current and valid driver’s license is required. This position requires a background check as part of the onboarding process. This position is generally indoors but frequently traveling meeting with customers and business associates. Travel is regular and frequent. Reasonable accommodations will be made upon request for those who have disabilities that qualify under the American with Disabilities Act. At GrayWolf, we believe our employees are our greatest asset. Our team environment is based on respect, effective communications, and accountability. We believe employees should have great working conditions along with opportunities to grow and develop. We proudly promote a diverse and inclusive workplace where everyone has a chance to be successful. GrayWolf is an Equal Opportunity Employer with an Affirmative Action Plan. We value Diversity. #LI-AC1

Job DescriptionIf you meet the minimum qualifications for this role, you could be scheduled for an interview in real time! Text "SCT" to (423) 460-8460 to apply with our recruiting assistant. All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: • Trustworthy – We strive for our actions to match our words in all our relationships., • Servant – Hearted – We enable and empower our team to serve the needs of customers, Team members, suppliers and the community., • Relational – We aim to build healthy relationships while fostering and environment that promotes compassion, balance, and personal and professional growth., • Resourceful – We value strategic insourcing, first looking to create solutions internally, and then looking to apply that knowledge to future opportunities. PRIMARY RESPONSIBILITY: Responsible for the set up and operation of the folder/gluer machine in accordance with the apprentice training plan and objectives. Works with assigned trainer to achieve proficiency of all objectives, ensuring high-quality packaging and products are produced at a consistent rate of speed in accordance with machine standards and production goals. SECONDARY RESPONSIBILITIES: • Operates the machine in a safe manner and notifies supervision of any unsafe conditions that might exist, • Receives instruction from trainer and performs duties necessary to become proficient in all learning objectives and milestones outlined in the apprenticeship training plan; operates machine in a safe and consistent manner, while maintaining standard operating procedure; advises Supervisor or trainer on information regarding the performance of the production run and/or machine crew., • Learns to safely start up and stop the machine and make machine adjustments in order to safely maintain machine at production and quality standards within target speeds, • Learns procedures necessary to set up jobs on machine to precise measurements and alignments following the training plan within allotted time for next production run, • At the beginning of each shift, reviews previous shift's report to determine status of run, issues with a job or the equipment and schedule information, • Logs productivity and provides comments for each production job in the manufacturing computer system; accurately completes production report and records production data; sets up and uses various scanners as needed, • Responsible for performing all quality checks and procedures and ensures quality of the product meets all standards and customer specifications with regard to folding, gluing, packaging, labeling, and stacking, including scrap defects; notifies Trainer or Supervisor of any discrepancies or areas of concern, • Observes feeder packers to be sure that the proper count is going into the cases and are packed to customer specifications; assists with providing instruction and guides activities of feeder packers when necessary, • Learns to troubleshoot, diagnose, and assists in repair of machine malfunctions;, • Reviews and understands all preventative maintenance responsibilities of an operator; learns proper procedures to perform routine cleaning and maintenance, • Ensures that finished products with defects are properly scrapped and discarded, • Communicates well with other team members, • Actively seeks improvements and updates to processes, new procedures and innovations, which would add to the efficiency and safety of the operation; proactively, • Welcomes updates and improvements to processes and follow new procedures and innovations, which would add to the efficiency and safety of the operation, • Performs work in a manner that keeps down time to a minimum, • Maintains a clean work environment in accordance with Food Safety and 5S systems, • Follows all safety related policies, rules, regulations, technical instructions, and guidelines; uses situational awareness and actively looks for weak signals to identify unsafe behaviors and conditions; consistently wears appropriate PPE for the task at hand and within the assigned area., • May be asked to help with duties in other areas or departments QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Must have basic computer skills and possess ability to utilize software. Must have mechanical ability and skills. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. Night Shift (3 Day/12 Hour) - 6:30 PM to 6:30 AM EST - Orange Team Amnicola Plant - 2601 Riverport Rd, Chattanooga, TN 37406

Job DescriptionDescription: We are a growing self-storage company seeking a reliable, self-directed independent contractor to assist with maintaining and caring for one of our storage facilities. This is a 1099 contractor engagement, not an employment position. This opportunity is ideal for someone who takes pride in their work, works well independently, and is looking for flexible supplemental income with the ability to manage their own schedule while ensuring property needs are handled consistently and professionally. Requirements: Maintenance & Repairs • Perform light maintenance and minor repairs around the property, • Use tools such as drills or grinders to remove locks when necessary, • Assist with delinquency lock processes as needed, • Manage weed control and general property cleaning, • Help maintain overall curb appeal and property appearance, • Clean out abandoned or vacated units and transport debris/items for disposal when necessary Property Oversight • Conduct routine property evaluations to identify maintenance or operational concerns, • Coordinate with vendors to help ensure timely completion of property-related services, • Monitor the overall appearance and condition of the property, • Communicate property concerns, project updates, or operational issues in a timely manner Auction & Administrative Support: • Assist with auction preparation tasks when needed, • Communicate property concerns, project updates, or operational issues in a timely manner Independent Work Expectations: • Work independently and manage your own schedule while ensuring agreed-upon tasks are completed, • Maintain professional communication with company contacts, customers, and vendors as needed, • Provide your own tools, equipment, transportation, and work materials necessary to perform services What You’ll Need (Requirements): • Must own a truck capable of hauling equipment, supplies, and debris, • Must provide and safely operate personal hand tools and power tools, • Physically able to lift up to 50 lbs. and work outdoors in varying weather conditions, • Able to work independently and manage tasks efficiently without direct supervision, • Reliable, responsive, and professional in communication, • Must pass a background check prior to engagement, • Must be legally authorized to work in the United States Important Classification Information: This is an independent contractor (1099) opportunity and not an employment position. Contractors engaged in this role: • Set and manage their own schedules based on property needs and agreed-upon expectations, • Are responsible for their own taxes, insurance, licensing, tools, transportation, and work-related expenses, • Are not eligible for company-sponsored employee benefits, including health insurance or paid time off, • Determine the manner and means by which services are performed, subject to project and service expectations This opportunity is ideal for a self-starter who enjoys working independently while taking pride in maintaining a high-quality property environment. Physical Demands & Work Environment: Contractors performing services in this role should be able to communicate effectively and safely operate tools and equipment as needed. Work may involve standing, walking, bending, reaching, lifting, outdoor exposure, and moderate noise levels depending on the worksite and operational needs. This description is intended to outline the general nature of services requested and is not an exhaustive list of all responsibilities that may arise during the engagement. Our Commitment: We value professionalism, respect, and equal opportunity in all contractor engagements. Selection decisions are based on qualifications, experience, business needs, and the ability to perform the services required.

Job Description All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: • Trustworthy – We strive for our actions to match our words in all our relationships., • Servant – Hearted – We enable and empower our team to serve the needs of customers, Team members, suppliers and the community., • Relational – We aim to build healthy relationships while fostering an environment that promotes compassion, balance, and personal and professional growth., • Resourceful – We value strategic insourcing, first looking to create solutions internally, and then looking to apply that knowledge to future opportunities. PRIMARY RESPONSIBILITY: The First Press Operator is responsible for the safe set up and operation of the conventional, sheet-feed printing press. Provides direction to print crew and ensures optimum print quality and production efficiencies are achieved at a consistent rate of speed in accordance with machine standards and customer specifications. SECONDARY RESPONSIBILITIES: • Coordinates with operators and/or Lead from previous shift to assess status of production run and including critical information or obstacles; reviews production schedule of upcoming jobs for the current shift., • Thoroughly reviews job ticket instructions to determine printing specifications, machine set up procedures, and supplies needed; follows instructions issued advising the Supervisor or Lead of any incorrect or non-recorded information necessary for proper set up and operation., • Sets up and safely starts machine in an efficient manner with minimal downtime; adjusts controls as needed to achieve optimum print quality at target run speeds; communicates with 2nd Press Operator throughout the production run to monitor and ensure efficiencies and quality standards are met; provides oversight and direction to 2nd Press Operator., • Actively utilizes the instruments and technology provided, including densitometers and color management or color control technology, to consistently monitor and adjust print settings and conditions to maintain color consistency and quality; performs adjustments necessary to achieve ink and water balance, including LED links when applicable, to hold consistent color that aligns with customer approved proofs and customer standards., • Consistently performs all quality checks before, during and after the production run; obtains all required approvals in accordance with SCT Quality standards and procedures to verify and ensure accuracy, clarity and quality of print including correct viscosity, color, shading, contrast, straining and ink usage., • Documents and reports all non-conforming products per SCT quality procedures; reports information to Quality Technicians and works with Supervisor and/or Lead to resolve., • Accurately and completely records information required after each job on production reports and/or in computer; maintains accurate logs of productivity, maintenance, and downtime., • Assists with training and coaching new Press Operators with learning required job responsibilities, as well as safety and quality procedures, necessary to perform the job; actively assists with training 2nd Press Operators and/or Print Apprentice to learn the duties and skills necessary to perform the responsibilities of a First Press Operator., • Actively seeks and adopts new updates and improvements to processes, new procedures, and innovations, which would add to the efficiency and safety of the operation; participates on Continuous Improvement project teams as requested to assist with identifying and implementing improvements in the department., • Participates during press checks as a representative of SCT with the customer to answer questions and take steps necessary to ensure customer specifications are satisfied., • Consistently maintains a clean work environment in accordance with Food Safety and 5S program to include the machine, desks, floors, and overall work area; ensures compliance with GMP and Food Safety requirements at all times., • Communicates effectively with other team members throughout the shift and at shift change to share critical information necessary to perform the job safely and efficiently; collaborates regularly with Quality Technicians/Supervisor to obtain necessary approvals and to ensure quality standards are consistently met., • Operates press with the skill necessary to produce quality product safely and successfully in a manner that keeps down time and waste to a minimum; utilizes machine downtime in a resourceful manner including training or assisting others, clean up, projects, or performing other tasks necessary within the department., • Consistently follows all safety related policies, rules, regulations, technical instructions, and guidelines; uses situational awareness and actively looks for weak signals to identify unsafe behaviors and conditions; consistently wears appropriate PPE for the task at hand and within the assigned area., • Attends training classes as assigned., • Assists other team members with duties in other areas or departments as requested. AUTHORITY: Must have the ability to lead a crew that has been placed with them to execute the demands of the printing operation efficiently and to respond to oral instructions from the supervisor and written instructions. QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or (GED); requires a minimum of 5 years experience operating a large format, sheet-fed conventional press; experience in the folding carton industry required; experience with LED inks is preferred; must have basic computer skills with the ability to effectively utilize software and other technology; requires mechanical abilities and skills. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. MATHEMATICAL SKILLS: Must have the ability to add, subtract, multiply and divide both fractions and decimals, solve equations, read a tape measure, and have an understanding of both standard and metric measuring systems. PHYSICAL DEMANDS: While performing the duties of this job, regularly required to walk, stand, use hands to finger, handle or feel objects, tools or controls and reach with arms and hands. Frequently is required to climb, balance, twist, stoop, kneel, crouch, or crawl. Frequently lifts/moves 25 to 75 pounds. Must be able to perform these functions for a minimum of 8 hours straight (with a 30-minute meal break any other applicable breaks during the shift) on a regular basis. Specific vision abilities required by this job include close vision, color vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The physical demands described here are representative of those that must be met by a Team member successfully performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, but the essential functions cannot be eliminated or performed by others. Regular attendance and reporting for work on time are necessary requirements as is availability for overtime work if necessary. WORK ENVIRONMENT: Exposure to a dusty atmosphere with loud noise, which will require both eye and ear protection. Moving mechanical parts will also be exposed; safety guards have been put in place for the safety of all Team members but during set up, the machine must be broken down and reassembled to complete the next job. Questions regarding such operation should be directed to your supervisor as they arise. The work environment characteristics described are representative of those a Team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, but the essential functions cannot be eliminated or performed by others. 6:00pm to 6:00am 3Day/12Hour shift Downtown Plant - 220 Compress Street, Chattanooga, TN 37405

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under supervision, the Electrical Technician must be capable of performing all tasks in Astec manufacturing electrical department. Must be able to assemble, evaluate, troubleshoot and correct deficiencies to make certain product specifications are met. Ensure that work is in accordance with relevant codes. This level of electrician will deal with live energized equipment and be trained and capable of performing all required tests and if necessary de-energize equipment to meet safe standards before proceeding. Key Deliverables • Assemble, evaluate, test, and maintain electrical or electronic wiring, equipment, appliances, and apparatus., • Troubleshoot and repair malfunctioning equipment., • Construct and fabricate parts, using hand tools and specifications., • Read and interpret electrical and electrical circuit blueprints and diagrams., • Perform preventative maintenance on a regular schedule. Key Activities & Responsibilities • Demonstrate Astec processes in all aspects of the manufacturing electrical department including panel room, construction manufacturing and industrial manufacturing as warranted by workload demands and scheduling needs., • Test and troubleshoot heaters to ensure equipment is ready before shipping to customer site., • Correct and re-test to verify corrective action was successful., • Communicate with electrical engineering recommendations to correct or improve processes., • Monitor quality issues that warrant concern and encourage postponement of equipment from being shipped., • Achieve quality results as it relates to the Company's vision and mission., • Promote and educate others on Astec's core values., • Follow company policies, procedures, and safety rules at all times. To be successful in this role, your experience and competencies are: • High School Diploma or equivalent and/or accreditation from a technical school or an applicable skilled trades program required., • 0-2 years working in manufacturing in order to understand equipment and process procedures., • Electrical background., • Must be detail oriented, good workmanship while taking and following direction with little to no supervision., • Demonstrated track record of working cross-functionally and as a team necessary., • Strong problem-solving skills desired., • Recognition that at every level growing experience in troubleshooting is essential to evaluate and correct concerns before testing. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation, • Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order. POSITION DETAILS Title: Electrical Technician I - Wilson Road Location: Chattanooga Tennessee 37410 Work Type: Full-time, On-site

Job Description Lula is looking for a 1099 Roofing Pro to help with property maintenance of several thousand rental properties across the Chattanooga area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: https://lula.life/become-a-provider/tennessee BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Please email pro@lula.life with any questions

Job Description Are we the road to your future? We are currently searching for an experienced Roadway EIT to support our Gulf Region located in Brentwood/Nashville, Knoxville, Chattanooga, or Memphis, TN. Candidates must be willing to relocate to Tennessee if out of state. What you’ll be doing: • Collects and analyzes data for inclusion in project plans and reports, • Assists and prepares project plans using OpenRoads Designer, • Contributes to the preparation and/or modification of engineering reports and calculations for a wide variety of projects, • Prepares and assists in the preparation of project construction quantities and cost estimates, • Prepare and assist in the preparation of project specifications, • Review project quantity estimates, details, and check calculations and drawings for compliance with project requirements, • Prepare and assist in the preparation of project schedules, • Performs other duties as assigned What you need to have: • BS in Civil Engineering, • EIT (E.I) Certification is desired but not required, • 2 - 4 years of experience, • Experience with OpenRoads Designer is preferred, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1

Job Description Are we the bridge to your future? We are currently searching for an experienced Senior Bridge Engineer focusing on bridge design and plan production to support our Gulf Region located in Mississippi and/or Tennessee. To be considered for this position, applicants must have, at minimum, 10 years of professional experience in structural engineering. Candidates should be based in or open to relocating to Mississippi or Tennessee. What you’ll be doing: • Lead and oversee bridge design projects from concept through completion, including analysis, design, and preparation of construction documents, • Manage the development of design plans, specifications, and calculations for various transportation and infrastructure projects, • Collaborate with internal teams, clients, and external stakeholders to ensure timely and successful project delivery, • Perform structural analysis using state-of-the-art software and apply engineering principles to solve complex design challenges, • Ensure compliance with DOT and other clients’ design standards, guidelines, and specifications, • Review and approve design plans, calculations, and construction documents for accuracy, completeness, and quality, • Mentor and provide technical leadership to junior engineers and staff., • Conduct site visits and inspections to assess the condition of existing structures and to monitor construction progress, • Review contractor submittals and provide recommendations on materials, methods, and construction procedures, • Participate in meetings with clients, consultants, and regulatory agencies to discuss project requirements and progress, • Maintain up-to-date knowledge of industry standards, best practices, and advancements in structural engineering technology What you need to have: • BS degree in Civil Engineering from an accredited four-year college or university, • A minimum of 10 years of professional experience in structural engineering, with a focus on bridge design and plan production, • PE is required, • Proven experience working on DOT projects and familiarity with DOT standards and specifications, • Proficiency in using bridge analysis software programs such as Open Bridge Designer, CSI Bridge, FB-MultiPier, and other bridge analysis software. Familiarity with drafting software such as MicroStation, • In-depth understanding of AASHTO and other relevant codes and standards., • Experience with all phases of bridge design, including analysis, detailing, and plan preparation, • Excellent written and verbal communication skills, with the ability to effectively present technical information to both technical and non-technical stakeholders, • Strong problem-solving skills and attention to detail, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Bonus points if you have: • Master’s degree in Structural Engineering from an ABET accredited university, • Experience in managing and leading teams of engineers and technical staff, • Familiarity with advanced bridge design methodologies and materials, • Previous experience with design-build projects, • Knowledge of relevant software for structural analysis and design Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 MS TN