Welder jobs in Saint Paul, MinnesotaCreate job alerts

Job Description The Pre-Owned Mechanic/ Turf Technician is responsible for inspecting, diagnosing, repairing, and preparing used commercial mowing and turf equipment for resale. This role ensures all pre-owned units meet company quality, safety, and performance standards before delivery to customers. Essential Duties and Responsibilities • Perform comprehensive inspections and evaluations of pre-owned equipment, • Diagnose mechanical, hydraulic, electrical, and engine issues accurately, • Complete repairs and refurbishments including:, • Engine and driveline service, • Hydraulic system troubleshooting and repairs, • Electrical system diagnostics, • Deck and cutting system repairs, • Completion of required safety checks, • Document condition reports and repair recommendations for each unit, • Work closely with manager to prioritize units for resale, • Maintain accurate service records and usage of parts, • Follow all safety guidelines and company procedures, • Safely and effectively, use all service and repair tools: hoist, welder, test equipment, pressure washer, compressors, power tools, etc., • Safely use forklift., • Work as a team in successfully completing the job., • Perform other duties as necessary and requested to successfully complete the job. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • High School diploma or equivalent., • Technical degree (2yr.) or equivalent experience required., • Strong knowledge of: Gas and diesel engines, Hydraulic systems, and Electrical diagnostics Skills and competencies • Strong troubleshooting and diagnostic ability, • Attention to detail and quality workmanship, • Ability to work independently and manage workload, • Time management and prioritization skills, • Team-oriented with good communication skills, • Mechanical aptitude and problem-solving mindset Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; drive; use hands to finger, handle, or feel; and talk or hear. The employee is required to stand, walk, and reach with hands and arms. Specific vision abilities required by this job include close vision and ability to adjust focus. There is frequent holding and grasping with the hands. Lift, push, and pull up to 75 lbs. required on a regular basis. The employee will drive a company vehicle. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work is performed indoors in a shop environment and outdoors on equipment. There is exposure to loud noise levels, vibration, chemicals, dust, mechanical hazards, and moving objects or other vehicles. May be exposed to cold and hot temperatures, inclement weather conditions, chemicals, mechanical hazards, and hazardous physical substances, gas and/or fumes.

Job DescriptionStructural Welder (Flux Core MIG) 🕒 1st Shift: 5:30 AM – 4:00 PM | 2nd Shift: 4:00 PM – 2:30 AM 💰 Pay: $28–$33/hour Build Projects That Matter! We're looking for experienced Structural Welders to join our team and help build steel components used in bridge and infrastructure projects. If you have Flux Core MIG welding experience and enjoy hands-on work, we'd love to hear from you. What You'll Do • Perform Flux Core (FCAW/MIG) welding on structural steel, • Read blueprints and weld symbols, • Complete welds in various positions, • Use shop tools such as grinders, saws, and drill presses, • Move materials safely and maintain a clean work area, • Work independently and as part of a teamWhat We're Looking For ✅ Structural welding experience (FCAW/MIG) ✅ Ability to read blueprints ✅ Experience with vertical welding (3G) ✅ Ability to pass welding tests (3G, 3F, 4F) ✅ Able to lift up to 50 lbs Why Join Us? ✅ Competitive pay: $28–$33/hr ✅ Growth opportunities, including Lead Welder roles ✅ Work on exciting bridge and infrastructure projects ✅ Supportive, team-oriented environment ✅ Performance bonus potential • Apply today and put your welding skills to work on projects that make a lasting impact!Job Type & Location This is a Contract to Hire position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $28.00 - $33.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Minneapolis,MN. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Mid Continent Engineering is seeking a Welder (TIG) to join our team! This is a 6 am to 4:30 pm- Monday through Thursday, opportunity. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: • Competitive Wages, • Medical, Dental & Vision for employee & family including domestic partners., • 401k with match, • Tuition Reimbursement, • PTO accrual starts immediately., • Yearly shoe allowance, • Referral Program Summary: Must have the ability to layout, fit, and weld diversified work (short run, production, or job shop) with TIG processes. Job Duties & Responsibilities: • Layout, position, and fit material to be welded in an efficient manner per print., • Sets up equipment to weld on a variety of metals and alloys., • Bolts, clamps, and tack weld parts to secure in position for welding., • Moves and positions material with hoist and forklift., • Maintain clean work area., • Regulates amps, volts, wire feed rate, gas flow and gas mixtures in accordance with material, weld process, and weld position within specifications., • Selects proper welding process, equipment, electrodes, and consumables for material being welded., • Perform other duties as assigned. Education and Experience: • High school education or G.E.D., • Must have 5+ years of TIG welding experience and be able to hold company welding certifications., • Prefer certificate of completion from technical school welding program and 5 years of working experience or 6 to 8 years related welding experience., • Must have the ability to pass the welding test and any other certifications to complete the job., • Blueprint reading includes weld symbols and geometric tolerancing., • Understands proper welding requirements for welding position, base material, joint design, and specifications. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided by the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environmental conditions of the production floor unless the office is adjacent to the production floor or per the individual’s job duty and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided by the company policy guidelines) when entering the production floor or if a requirement of a department that an individual is entering or working in. 1st Shift- 6 am to 4:30 pm, Monday through Thursday

Job Description MTI Distributing, Inc., a subsidiary of The Toro Company, is the Upper Midwest’s leading supplier of products and services to the green industries. Through a combination of exceptional products and superior service, MTI is in the business of providing landscape beautification solutions to golf courses, schools, municipalities, landscape contractors, and independent dealers. We currently have an opening for a Turf Equipment Technician in our Brooklyn Center, Minnesota location. The successful candidate will be an outstanding mechanic with above average diagnostic, hydraulic, electrical and mechanical skills. The position is Full-time, Monday - Friday, 1st shift. Essential Duties and Responsibilities • Set up equipment per manufacturer and customer specifications., • Install necessary parts, check fluid levels, test and assure proper operation., • Operate and test equipment to ensure quality standards are met., • Safely and effectively use all service and repair tools: hoist, welder, test equipment, pressure washer, compressors, power tools etc., • Safely operate a forklift., • Maintain cleanliness and safety of shop area., • Effectively work within a team to meet customer needs, • MTI provides specialized tools specific to our products, however the successful candidate provides his/her own hand and power tools. Education and/or Experience • Technical degree (2yr.) or equivalent experience required., • Demonstrated experience and effectiveness in diagnosing problems with gas and diesel engines, hydraulics and electrical systems., • Computer Skills: Microsoft Office, Parts based lookup tools, Diagnostic Software, • Must be able to lift, push, and pull up to 75 pounds., • Strong customer service/communication skills. MTI offers a wage of $28 - $35 per hour; based upon the qualifications of the selected candidate. Our benefit program includes: 401(k), medical, dental, vision disability and life insurance, PTO and holiday pay. Candidates will be subject to pre-employment background check, drug screen, and physical. Candidates will be subject to pre-employment background check, drug screen, and physical. We are proud to be an Equal Opportunity Employer including protected veterans and individuals with disabilities.

Job Description D7 Pneumatics LLC is currently hiring experienced Industrial Millwrights for our upcoming Summer and Fall shutdown season. We perform maintenance and industrial projects throughout a variety of heavy industrial facilities and are looking for dependable tradespeople who take pride in producing quality work while maintaining a strong commitment to safety. What You'll Be Doing • Perform industrial maintenance, repairs, and installations during scheduled shutdowns., • Work safely and efficiently in fast-paced industrial environments., • Read and interpret drawings and work instructions., • Work independently and as part of a skilled team to meet shutdown schedules.Requirements, • Minimum 3 years of industrial welding or millwright experience., • Must provide your own hand tools required for the trade., • Must be willing and able to travel for shutdown projects., • Must be able to pay for your own accommodations while working away from home., • Strong work ethic, reliability, and commitment to safety.Preferred Experience Experience working in any of the following industries is considered a strong asset: • Sawmills, • Steel mills, • Concrete plants, • Other heavy industrial facilitiesCompensation, • Competitive pay based on experience and qualifications., • Opportunity for consistent shutdown work throughout the summer and fall., • Work with an experienced team on a variety of industrial projects. If you're an experienced Industrial Welder or Millwright looking for steady shutdown work with a growing company, we'd like to hear from you. Apply today by submitting your resume along with a brief summary of your industrial experience.

Job DescriptionJoin Our Team We're seeking a skilled Quality Inspector - Nondestructive Testing (NDT) to help ensure our products meet the highest standards of quality and safety. In this role, you'll perform inspections, testing, troubleshooting, and quality evaluations throughout the manufacturing process while working closely with production, machining, and welding teams. If you have experience with NDT methods, welding inspections, precision measurement, and quality systems, we'd like to hear from you. What You'll Do • Perform incoming steel inspections using destructive and nondestructive testing methods., • Inspect fabricated components for dimensional accuracy and metallurgical compliance., • Conduct in-process inspections of weldments to ensure compliance with applicable codes, standards, and specifications., • Perform Ultrasonic Testing (UT), Magnetic Particle Testing (MT), and Liquid Penetrant Testing (PT) on critical welds., • Evaluate weld quality before machining to verify sufficient material and acceptable weld integrity., • Conduct destructive weld testing, including annual welder qualification testing., • Inspect machined weldments using precision measuring equipment., • Maintain company-wide calibration records and manage inspection equipment., • Set up and verify calibration of inspection tools used within the machine shop., • Assist in developing and improving NDT procedures in accordance with German DIN standards and American Welding Society (AWS) requirements., • Maintain inspection reports, testing documentation, and quality records., • Investigate quality concerns and recommend corrective actions., • Support continuous improvement initiatives and other quality-related projects.QualificationsRequired, • Associate Degree in Nondestructive Testing or related field., • Minimum of two years of experience in Nondestructive Testing and Quality Inspection., • Current or ability to maintain:, • AWS Certified Welding Inspector (CWI), • ASNT Certification, • Ultrasonic Testing (UT) Levels I & II, • Magnetic Particle Testing (MT) Levels I & II, • Liquid Penetrant Testing (PT) Levels I & II, • Ability to read and interpret:, • Engineering drawings, • Blueprints, • Welding symbols, • Hydraulic schematics, • Electrical schematics, • Strong troubleshooting and root cause analysis skills., • Excellent communication and documentation abilities., • Ability to prioritize multiple projects in a fast-paced manufacturing environment.Preferred, • Experience with SAP., • Proficiency with Microsoft Office Suite., • Working knowledge of hydraulic, electrical, diesel, and gas-powered systems., • Experience working in heavy equipment, structural steel, or industrial manufacturing.Physical Requirements, • Perform inspections using NDT and precision measuring equipment approximately 80% of the workday., • Perform computer and documentation work approximately 15% of the workday., • Occasionally work outdoors in varying weather conditions (approximately 5%)., • Ability to work safely in a manufacturing environment.Why Join Us?, • Competitive pay based on experience and certifications., • Stable, growing manufacturing environment., • Work with industry-leading heavy equipment., • Opportunities for continued training and certification., • Comprehensive benefits package including medical, dental, vision, 401(k), paid time off, and holidays.

Job DescriptionBenefits: • Health insurance, • Paid time off, • Vision insurance, • 401(k), • Dental insurance Traveling TIG Welder $27.00/hr During Training; $35.10/hr Upon Successful Completion of Training & Union Affiliation Per Diem + Paid Travel Based in St. Cloud, MN - 60% Travel Applicants must currently reside in MN, SD, ND, IA, IL or WI Are you an experienced TIG welder looking for more than a shop job? This is an opportunity to travel the country, work in power plants and power generation facilities, and build specialized skills while earning strong pay, per diem, and fully covered travel expenses. What You'll Do • Perform TIG welding on aluminum, stainless steel, copper, and steel, • Complete horizontal and vertical aluminum pipe welding, • Inspect, maintain, and install electrical bus duct systems, • Read blueprints and follow detailed procedures, • Work safely in industrial and power generation environments, • Travel to projects across the U.S. (approximately 60%)What We Offer, • $27.00/hr during training (non-union), • $35.10/hr upon successful completion of training and union affiliation, • Per diem while traveling, • 100% paid flights, hotels, and rental cars, • 3-Year Bus Duct Technician Apprenticeship Program, • Health, Dental, Vision, Life Insurance, and Retirement Benefits (after vesting period), • Career growth, certifications, and specialized trainingWhat We're Looking For, • 1 year of TIG welding experience (aluminum and/or stainless steel), • Experience outside of trade school or college, • Ability to read blueprints and follow procedures, • Comfortable with travel, heights, and industrial environments, • Valid Driver's License, • Real ID or Passport (required), • OSHA 10 Additional Requirements, • Pass background check, drug screen (including marijuana), DOT physical, and pre-placement exam, • Ability to obtain access credentials for nuclear power facilitiesIf you take pride in quality welding, enjoy travel, and want to build a long-term career in a highly specialized industry, we want to hear from you.

Job DescriptionDescription: Summary Zero-Max, Inc., a trusted leader for over 75 years specializes in the manufacturing of motion control and power transmission components. Our product offerings include Composite Disc Couplings, Servo Couplings, Offset Couplings, Torque Limiters, Right Angle Gear Drives, Linear Actuators, and Mechanical Variable Speed Drives. We deliver both off-the-shelf standard products and entirely custom designs tailored to specific application requirements. Our team is dedicated to providing innovative and reliable solutions to meet diverse engineering needs. Our Core Values: 1. Provide best in class service and solutions, 2. Do the right thing, 3. Hold ourselves accountable Zero-Max is a newly renovated office and manufacturing facility located on scenic grounds in Plymouth, MN. We are proud of our employees’ years of service and are dedicated to offering competitive benefits and pay, including: • Robust health, dental, and vision plans, • 401(k) plan with a generous 6% match plus a 4% discretionary profit-sharing plan, • Generous Paid Time Off (PTO) and paid holidays, • Employer paid disability insurance, • Training, mentorship, and coaching from leadership, • Healthy work/life balance, • Other fringe benefits in a fun and welcoming environment that sets us apart from most companies! Zero-Max is currently recruiting for a Maintenance and Tool Room Manager is responsible for all building and equipment improvements and maintenance. Designs, builds, and maintains required tooling and fixtures for production machining of all Zero-Max products; manages Tool Room and Maintenance employees. ESSENTIAL DUTIES AND RESPONSIBILITIES Machine Shop • Plan, coordinate, and schedule all preventative maintenance and repair activities, • Analyze, diagnose, and repair CNC equipment, including mechanical, hydraulic, and electrical systems, • Plan and oversee all installation activities, • Analyze and diagnose machining and tooling issues, • Oversee and support TIG welding of products, • Perform TIG welding in absence of welder, • Ensure that safety program and initiatives are followed and recommend changes to ensure safety Tool Room • Design and build tools and fixtures for production machining, • Coordinate the machining and construction of tools, gauges, fixtures, etc., • Check tools to ensure that precision standards are met., • Requisition of the purchase of small tooling requirements., • Oversee critical spare part stock and orders components as necessary Facilities • Conduct regular inspections of facilities to detect and resolve problems, • Manage relationships with contractors and service providers, • Partner with leadership and assist with all shop and office projects, • Communicate openly with leadership team and inform them of potential problems and/or solutions Supervisory Responsibilities • Provide overall supervision of Tool Room and Maintenance employees, • Responsible for all aspects of performance management including interviewing, hiring, training, planning, assigning and directing work in addition to appraising performance, resolving problems, and acting on opportunities, • Demonstrate our core values of best-in-class service and solutions, hold ourselves accountable, and do the right thing Requirements: JOB REQUIREMENTS Essential Knowledge, Skills and Abilities • Knowledge and proven success of preventive maintenance practices in a machining environment., • Ability to troubleshoot issues and coordinate timely solutions, • Ability to manage multiple priorities, • Skill in maintaining accurate records, logs, and documentation, • Ability to work independently and make sound decisions, • Strong customer service focus when working with employees at all levels and areas of the building, and vendors, • Strong communication skills at all levels, • Ability to foster a safe and positive environment, • Strong organizational skills, • Project management skills, • Contract management skills for overseeing vendor agreements, • Experience supervising staff, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plain and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. EDUCATION and/or EXPERIENCE • High School or equivalent required; with some appropriate post-secondary related education, • Eight to ten years of general machine shop experience including welding, and/or three to five years of tool & die experience, and/or three to five years maintenance experience., • Three to five years supervisory experience., • Must have experience maintaining CNC Mills and Lathes., • ERP experience; Epicor a plus, • Microsoft Office experience PHYSICAL DEMANDS AND WORK ENVIRONMENT • Typical of a Manufacturing Environment, • While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration., • The noise level in the work environment is usually loud., • Regularly required to stand; use hands to finger, handle, or feel objects, tool, or controls; and talk or hear., • Required to walk, sit, and reach with hands and arms., • Occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Zero-Max is proud to be an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. – Veteran/Disability

Job Description H2O innovation is a smart water treatment solutions company. We simplify water treatment by integrating state-of-the-art technologies to solve water challenges for good with our team of trusted experts. Our mission is to provide services on an international scale, in a people-oriented, caring environment that fosters professional and personal growth. Be part of our talent pool and grow with H2O. The TIG Welder/Assembler will hold a permanent & full-time position and will work for the Ramsey, MN plant. For this position, welding will not be required every day and can vary depending on the type of project. You will be asked to perform a wide variety of assembly tasks and opportunities to learn new skills. The Benefits Overall remuneration including: • Profit sharing bonus program;, • Group Insurance plan including dental, vision & telemedicine;, • 401K plan with employer's contribution;, • Three (3) weeks of accrued vacation & five (6) wellness days;, • Eleven (11) paid statutory holidays. The Day-to-Day • TIG welding stainless steel pipes;, • Weld and Assemble pipes, equipment, instruments and valves to frame structures;, • Welding structural frames per AWS and welding SS pipe per ASME;, • Glue PVC pipe and fittings;, • Measuring, cutting, drilling, tapping and mechanical assembly;, • Layout and follow direction on running conduit to devices;, • Thread and cut rigid metal conduits;, • Respect the product planning timescale;, • Respect and follow safety regulations;, • Ensure a good quality product;, • Support process improvements;, • Maintain the work area and equipment in a clean and orderly condition;, • Carry out all other related tasks. The Skills We Are Looking for • A minimum 3 years of welding experience;, • Ability to read technical plans;, • Personal tools;, • Candidates will be required to pass a 6G weld test;, • Good memory and capable of multi-tasking. #ZR #INDEED Company DescriptionWe Simplify Water H2O Innovation is a water solutions company dedicated to helping communities and industries solve their most pressing water challenges. Guided by its mission to Simplify Water, the Corporation delivers value through four synergistic pillars: Water Technologies & Services (WTS), Specialty Products (SP), Operation & Maintenance (O&M), and Water Infrastructure Development (WID). H2O Innovation provides equipment, chemicals, consumables, and long-term services that support the full life cycle of water, wastewater, and water reuse. Every day, the Corporation empowers its team with the resources and guidance they need to exceed customer expectations. By integrating innovation and operational excellence, H2O Innovation has become a trusted global partner for sustainable water management.We Simplify Water\r\n\r\nH2O Innovation is a water solutions company dedicated to helping communities and industries solve their most pressing water challenges. Guided by its mission to Simplify Water, the Corporation delivers value through four synergistic pillars: Water Technologies & Services (WTS), Specialty Products (SP), Operation & Maintenance (O&M), and Water Infrastructure Development (WID). H2O Innovation provides equipment, chemicals, consumables, and long-term services that support the full life cycle of water, wastewater, and water reuse. Every day, the Corporation empowers its team with the resources and guidance they need to exceed customer expectations. By integrating innovation and operational excellence, H2O Innovation has become a trusted global partner for sustainable water management.

Job Description Seeking a Traveling Electrical TIG Welder for a direct hire opportunity with our client based in Minneapolis, MN. Travel will be required up to 60%. Only candidates located in Minnesota, South Dakota, North Dakota, Iowa, or Wisconsin will be considered. This position offers full benefits including PTO, Medical, Dental and 401k! Starting Pay: $35.10/hour after successful completion of the first three weeks of training. Pay increases upon completion of the Bus Duct Technician Apprenticeship Program. Benefits: Medical, Dental, Vision, 401K, per diem (while traveling), and 100% employer-paid hotels, flights, and rental vehicles. This role combines TIG welding with hands-on electrical field service at power generation facilities across the United States, including nuclear and non-nuclear power plants. You'll perform aluminum TIG welding while also inspecting, maintaining, refurbishing, and installing electrical bus duct systems. Responsibilities: • Perform aluminum TIG welding on horizontal and vertical pipe (1/8"–1" thickness), • Complete approximately 80% electrical bus duct inspection, maintenance, installation, and refurbishment work, • Perform up to 20% TIG welding, depending on project requirements, • Inspect, clean, paint, silver plate, and refurbish bus duct systems, • Install bus duct systems, including rigging, alignment, and torquing, • Read blueprints and follow detailed procedures and safety standards, • Maintain accurate field documentation and job records, • Keep work areas clean, organized, and safe, • Collaborate with foremen and crew members while actively seeking feedback and guidance, • Complete required computer-based training and testingTravel & Schedule, • Travel approximately 60% throughout the U.S., • Assignments typically last 2–8 weeks, with some extending up to 3–6 months, • Emergency outage response is required, with the ability to mobilize within 24 hours (approximately 6–8 emergency calls per year), • Expect extended schedules during outages, including 6-day/10-hour or 7-day/12-hour workweeks, • Day and night shifts are required based on project needs, • Workload is heaviest during the spring and fall outage seasons, • A REAL ID or valid passport is required for air travel Qualifications: • Minimum 2 years of TIG welding experience with aluminum or stainless steel (professional experience; school experience alone does not qualify), • Welding certification from an accredited school preferred, • Valid driver's license, • OSHA 10 certification required before start date, • Comfortable working at heights and in confined industrial environments, • Willing to travel extensively, • Ability to become certified under company welding procedures, including SMAW, GTAW, and GMAW processes, • Ability to read blueprints and technical documents, • Strong communication and teamwork skills, • Basic computer proficiency, • Ability to lift up to 50 poundsPre-Employment Requirements, • This is a safety-sensitive position supporting critical infrastructure and federal projects. Employment is contingent upon successfully completing:, • Criminal background check, • Drug screening (including marijuana), • DOT physical and obtaining a DOT Medical Card, • Pre-placement physical examination, • Applicants must also be eligible to obtain unescorted access to nuclear power facilities.Physical Requirements, • Frequently stand, walk, climb, crouch, and work in industrial environments, • Work in confined spaces and various weather conditions, • Lift and carry up to 50 pounds, • Wear required personal protective equipment (PPE), • Travel extensively by air and vehicle, • Ability to pass all required medical screenings and physical examinations If you are interested in learning more about this role, please submit your resume for immediate consideration! INDH Powered by JazzHR cDTPnfNh3D

Job Description Growing Central MN welding company seeking to hire multiple traveling welders to join their team! These roles are full-time, long-term roles with OT and full benefits available. These roles are direct hire, right into the union! Candidates will be traveling all across the US to work on a variety of different job sites doing TIG welding, mostly on aluminum, and a lot of basic preventative maintenance, installation, and inspection of products. Candidates may also be doing some Stick welding as needed. The work takes place on new construction job sites, maintenance on existing sites, and remodeling on existing sites, so will work on a variety of different projects. Candidates will be on the road for 1-2 months at a time working on a job site, then will get some time off, then will hit the road again. All hotel expenses are paid for by the company, and daily per diem is paid to employees as well. Candidates MUST be comfortable traveling / living on the road, as pretty much every job site requires traveling. Most weeks candidates are working a ton of OT, so candidates must be comfortable working long days and weeks. Candidates will train in Central MN for the first few weeks of work, then hit the road after that. Training and orientation pay starts at $27 per hour, then once training is complete after a few weeks, the pay immediately goes up to $35 per hour. Most employees are making $50-$55 per hour after 3 years. We are looking for candidates who have 2+ years of professional TIG welding experience (preferably working with Aluminum or Stainless steel) OR candidates can have a welding diploma / degree and 1+ years of professional TIG welding experience. Candidates must also posses a passport or a real ID for travel. Why work here: • Direct hire roles, start right on union payroll and benefits right away, • EXCELLENT benefits package, • Tons of OT available - realistic to make over $100K in year 1, • Travel all around the country, • Hotel is fully paid for by company and receive a daily per diem If you are interested in these career opportunities, please apply with resume and contact info for consideration! Job Type & Location This is a Permanent position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $70000.00 - $90000.00/yr. • 100% employer paid flights, hotels, and rental cars $30 per diem, • Extensive Safety Program and exceptional Safety Ratings 100% Covered Benefits (after vesting period), • Retirement plan, • Health, Dental, and Vision insurance, • Life insurance policy Workplace Type This is a fully onsite position in Minneapolis,MN. Application Deadline This position is anticipated to close on Jul 23, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Join a Team That Builds with Confidence MFC is growing and looking for skilled MIG/TIG Welders to join our team on both 1st and 2nd shift in St. Paul, MN. For more than 50 years, MFC has built trusted hose assemblies and fluid transfer solutions for customers across industries. As an ISO 9001-certified manufacturer, we take pride in quality workmanship, teamwork, and in creating a workplace where employees can build long-term careers. If you enjoy hands-on work, take pride in precision welding, and want to work with a team that values craftsmanship and reliability, we'd love to hear from you. Available Shifts • 1st Shift, • 2nd Shift Job Summary The MIG/TIG Welder is responsible for welding and fabricating metal components using MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) welding techniques. This role works with a variety of materials, including steel, aluminum, and stainless steel, ensuring welds are clean and precise and meet MFC quality standards. This position requires the ability to read blueprints and technical drawings, prepare and operate welding equipment, and safely complete fabrication work while contributing to daily production goals. Responsibilities • Perform MIG and TIG welding on metal components, ensuring strong and precise welds, • Fabricate parts and assemblies according to blueprints, work instructions, and technical drawings, • Set up and adjust welding equipment for optimal performance, • Inspect welds for proper penetration, alignment, and quality, • Perform routine maintenance and basic troubleshooting on welding equipment, • Maintain accurate records of work completed and materials used, • Work closely with fabricators, machinists, engineers, and production team members to meet deadlines, • Follow all safety procedures and maintain a clean and organized work area, • Support quality standards and continuous improvement efforts Skills & Qualifications • Previous MIG and TIG Welding experience required, • Ability to read and interpret blueprints, technical drawings, and welding symbols, • Strong knowledge of welding materials, equipment, and safety standards, • Attention to detail with commitment to producing high-quality work, • Strong hand-eye coordination and manual dexterity, • Ability to work independently and as part of a team, • Manufacturing or industrial welding experience preferred Physical Requirements • Ability to lift and move materials up to 50lbs, • Ability to stand, bend, kneel, and move throughout the shift, • Visual ability to inspect weld quality and accuracy, • Comfortable working in a production manufacturing environment Work Environment • Manufacturing/Industrial Setting, • Exposure to: noise, welding fumes, machinery, varying temperatures, • Required use of PPE and Welding safety equipment Benefits MFC offers a competitive benefits package, including: • 401(K) + Company Match, • Dental, Health, Vision, and Life insurance, • HSA, • Paid Time Off, • Retirement Plan Build your future with a company that values craftsmanship, teamwork, and quality. Apply today and join MFC in helping us continue to convey confidence every day. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Retirement plan Work Location: In person Company DescriptionAbout MFC: MFC is a leading fabricator of industrial and hydraulic hose, fittings, and formed tube products. We market our products throughout North America to various industrial and commercial customers. Based in St. Paul, MN, MFC has manufacturing and distribution facilities throughout Minnesota, Wisconsin, and Illinois.About MFC: \r\nMFC is a leading fabricator of industrial and hydraulic hose, fittings, and formed tube products. We market our products throughout North America to various industrial and commercial customers. Based in St. Paul, MN, MFC has manufacturing and distribution facilities throughout Minnesota, Wisconsin, and Illinois.

Job Description GENERAL SUMMARY This position is responsible for welding on a variety of items, which may be subject to heavy stress or load. Usually welding for mechanical strength. ESSENTIAL FUNCTIONS -Responsible for welding a variety of items which may be subject to heavy stress or load. Usually welding for mechanical strength. -Responsible for quality of work performed in welding area. -Accountable for using caution in handling equipment, tools, and parts. -Responsible for the general maintenance of both machinery and plant area, including cleaning and maintenance of welding machines and all tools involved in daily production. -Responsible for good housekeeping practices in the welding area. -Abides by all policies, procedures, and guidelines of the company including good common sense safety practices. -Adheres to the Company Core Values: Performance Driven, Quality in All We Do, Act with Integrity and Professionalism, Collaborative Continuous Improvement, Be Safe, and Impress the Customer. -Adheres to the Company CARE Initiative: Commitment, Accountability, Responsiveness, Effort -Performs all job assignments as instructed by the Group Lead, Manufacturing Supervisor, and/or Vice President, Operations. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED EDUCATION and/or EXPERIENCE High School Diploma or general education degree (GED) plus one-year certificate from college or technical school and five years related experience; or equivalent combination of experience and training. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS None Required. Equal Opportunity Employer A background and drug screening will be conducted for employment purposes.

Job Description Turner Industries Group is looking for experienced Welders for maintenance and project work near the Saint Paul, MN area. • Must be able to pass background check and drug screen, • Must pass weld test, • No per diem or relocation General Job Description: Lay out, fits, and welds fabricated, cast and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Functional Requirements: Selects equipment and plans layout, assembly and welding; lays out, positions, aligns and fits components together; bolts, clamps, tack welds parts to secure in position for welding; sets up equipment and welds parts; may assemble parts by bolting and riveting; may weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, mig, tig, etc.; may weld pipe, sheet metal, structural steel, brackets or other materials; may repair products by dismantling, straightening, reshaping and reassembling parts; may use cutting torch to cut materials and demo existing assemblies. Qualification Standards: • High school or equivalent, • Minimum four (4) years of experience in specified skill, • Must be able to pass a weld test before being hired, • Must be certified as a welder, • Written pre-employment qualification test, • Post-offer drug/alcohol screen and physical evaluation, • Hazard Communication orientation/test, • Turner Industries Group, LLC indoctrination, • OSHA approved corrective eye wear (Z87), • Job site orientation, • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.), • Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.), • Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Tools/Equipment: Employee may be required to provide the following: tool box, crescent wrenches, hacksaw, pipe wrench, set of combination wrenches, striker, tip cleaner, hood, cutting goggles, soap stone holder, welding gloves, set of allen wrenches, tri square, bottle wrench, ball pein hammer, channel locks, rain suit. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction Mental Involvement: May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions Work Environment Factors: • Location: industrial maintenance and construction sites, equipment yard and/or fabrication shop, • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas, • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST Job Posted by ApplicantPro

Job Description GENERAL SUMMARY This position is responsible for welding on a variety of items, which may be subject to heavy stress or load. Usually welding for mechanical strength. ESSENTIAL FUNCTIONS -Responsible for welding a variety of items which may be subject to heavy stress or load. Usually welding for mechanical strength. -Responsible for quality of work performed in welding area. -Accountable for using caution in handling equipment, tools, and parts. -Responsible for the general maintenance of both machinery and plant area, including cleaning and maintenance of welding machines and all tools involved in daily production. -Responsible for good housekeeping practices in the welding area. -Abides by all policies, procedures, and guidelines of the company including good common sense safety practices. -Adheres to the Company Core Values: Performance Driven, Quality in All We Do, Act with Integrity and Professionalism, Collaborative Continuous Improvement, Be Safe, and Impress the Customer. -Adheres to the Company CARE Initiative: Commitment, Accountability, Responsiveness, Effort -Performs all job assignments as instructed by the Group Lead, Manufacturing Supervisor, and/or Vice President, Operations. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED EDUCATION and/or EXPERIENCE High School Diploma or general education degree (GED) plus one-year certificate from college or technical school and five years related experience; or equivalent combination of experience and training. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS None Required. EQUAL OPPORTUNITY EMPLOYER A background and drug screening will be conducted for employment purposes.

Job DescriptionOverview We are seeking a skilled Welder to perform primarly spot welding and Mig/Tig welding. Responsibilities • Perform mostly spot welding, as well as MIG/TIG welding, on various materials to meet production specifications., • Read and interpret blueprints and technical drawings to ensure accurate welding processes., • Conduct quality inspections of welds to ensure compliance with industry standards., • Maintain welding equipment and tools, ensuring they are in good working condition., • Collaborate with team members to optimize production efficiency and workflow., • Adhere to safety protocols and maintain a clean and organized work area. Qualifications High school diploma or equivalent; technical certification in welding preferred. Proven experience in Spot, MIG, and TIG welding, with a strong understanding of welding techniques. Knowledge of welding rods, gas, and equipment settings. Ability to read and interpret blueprints and technical specifications. Strong attention to detail and commitment to producing high-quality work. Excellent problem-solving skills and the ability to work independently or as part of a team. Familiarity with safety standards and practices in a welding environment.

Job Description Join Our Employee-Owned Team at Assurance Manufacturing! Assurance Manufacturing, a leader in precision sheet metal fabrication, stamping, machining, and assembly, is looking for talented individuals to join our employee-owned team. We operate in a modern manufacturing facility and are committed to providing comprehensive and rewarding work experience. We believe in sharing our success with our employees, which is why we offer an outstanding compensation and benefits package that includes: • Health & Wellness: Medical/HSA, Dental, Short-Term Disability (STD), and Long-Term Disability (LTD)., • Life Insurance: Basic Life and Voluntary Life coverage., • Retirement & Ownership: A robust 401k with company match and an Employee Stock Ownership Plan (ESOP), giving you a direct stake in our company's success., • Performance Incentives: Discretionary bonus potential. At Assurance Manufacturing, you're not just an employee; you're an owner. Come grow with us! Welder Set-Up Responsibilities: • Follows work order procedures and routings; gathers required tools and materials based on instructions, drawings, and specifications provided for the job with minimum instruction/supervision required., • Sets up welding jobs for both themselves and at other times others., • Repairs and fabricates various items, fixtures or equipment using cutting, grinding, and welding techniques with minimum instruction/supervision required., • Ensure parts are not damaged by warping, distortion, expansion, or shrinkage outside of tolerance., • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered. Follows Control of Nonconforming Product Procedure., • Follows procedures in relation to inspection of welded parts., • Crosstrain in other areas of the plant as necessary to meet production demands., • Adheres to all safety rules and guidelines., • Performs other related duties as assigned Welder Set-Up Qualifications: • Ability to work from drawings and job layouts., • Ability to work with minimum supervision and direction., • Thorough understanding of machines and tools used in welding., • Good understanding of technical plans, drawings, models, and blueprints especially weld symbols., • Excellent ability to read and listen to assignments given in a variety of forms., • Basic understanding of mathematics as related to welding assignments., • Ability to measure parts with calipers and micrometers., • Ability to use ruler, square, protractor, templates, gauges, etc., • Good teamwork skills., • Ability to pass an AWS Certified welding test. Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Assurance Manufacturing 9010 Evergreen Blvd NW, Coon Rapids, MN 55433 We participate in E-Verify Job Posted by ApplicantPro

Job Description We are seeking a Welder/fabricator to become an integral part of our team! The Welder will use MIG and TIG welder to complete short run projects Responsibilities: • Manufacture and fabricate finished metal products, • Follow blueprints to meet product specifications Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionCurrent owner is 4th generation family with the company starting in 1949. Many of our employees have been with the company for 10+ years.Current owner is 4th generation family with the company starting in 1949. Many of our employees have been with the company for 10+ years.

Job Description Fabricator Job Description Hollow Metal Doors & Frames Department: Manufacturing / Production Reports To: Production Supervisor Employment Type: Full-Time Position Summary The Fabricator/Welder is responsible for fabricating, welding, modifying, and assembling commercial hollow metal doors and frames according to shop drawings, work orders, and industry standards. This position requires precision welding, metal fabrication skills, and attention to detail to ensure products meet company quality standards and customer specifications. The ideal candidate has experience with MIG welding, steel fabrication, and commercial door and frame manufacturing while maintaining a strong commitment to workplace safety and productivity. Essential Duties & Responsibilities Fabricate commercial hollow metal doors and frames from work orders and shop drawings. Perform MIG welding on 16- to 14-gauge steel components. Fabricate and weld: Single door frames Double door frames Sidelight frames Borrowed lite frames Transom frames Custom frame assemblies Install hardware reinforcements for hinges, locks, closers, strikes, and specialty hardware. Cut, fit, and assemble steel components using fabrication equipment. Operate grinders, saws, punches, drill presses, presses, and other fabrication machinery safely. Grind and finish welds to company quality standards. Read and interpret architectural drawings, and fabrication schedules. Verify measurements, squareness, and tolerances using measuring tools. Inspect completed work for quality, accuracy, and compliance with specifications. Prepare finished products for painting, staging, or shipment. Maintain equipment and keep work areas clean and organized. Follow all OSHA safety regulations and company safety procedures. Assist other departments as production demands require. Perform additional duties as assigned by supervision. Required Qualifications High school diploma or GED preferred. Ability to read and interpret work orders and shop drawings. Experience using fabrication equipment and hand tools. Strong mechanical aptitude and attention to detail. Ability to work independently and within a team environment. Basic math and measuring skills. Preferred Qualifications Experience manufacturing commercial hollow metal doors and frames. Knowledge of commercial door hardware preparations. Knowledge, Skills & Abilities MIG welding Steel fabrication Mechanical aptitude Precision measuring Quality inspection Problem-solving Time management Organizational skills Effective communication Safe operation of fabrication equipment Physical Requirements Ability to stand for extended periods. Frequently lift, carry, push, or pull up to 75 pounds. Ability to bend, kneel, squat, reach, and climb as necessary. Manual dexterity to safely operate welding and fabrication equipment. Ability to wear required Personal Protective Equipment (PPE), including: Welding helmet Safety glasses Gloves Hearing protection Working Conditions Manufacturing environment with exposure to: Welding fumes Sparks Noise Dust Moving machinery Indoor production facility. Overtime and weekend work may be required to meet production schedules. Performance Expectations Employees in this position are expected to: Produce high-quality welds requiring minimal rework. Meet daily and weekly production goals. Maintain excellent attendance and reliability. Follow all safety procedures. Produce accurate work while minimizing waste. Demonstrate teamwork and professionalism. Contribute to continuous improvement efforts throughout the manufacturing process. Company DescriptionOperational since 1945, Wheeler Hardware Co. has been into the installation, maintenance and repairs of commercial doors, frames and finish hardware. Backed by some of the largest manufacturers in the world, Wheeler Hardware is dedicated to providing the highest quality industrial hardware products available to ensure our customers of consistent quality and exceptional performance. Wheeler Hardware has an ongoing commitment to providing unparalleled service solutions to all of our customers, large and small.Operational since 1945, Wheeler Hardware Co. has been into the installation, maintenance and repairs of commercial doors, frames and finish hardware. Backed by some of the largest manufacturers in the world, Wheeler Hardware is dedicated to providing the highest quality industrial hardware products available to ensure our customers of consistent quality and exceptional performance. Wheeler Hardware has an ongoing commitment to providing unparalleled service solutions to all of our customers, large and small.

Job DescriptionJob Title: MIG Welder – Heavy Gauge SteelJob Description This role focuses on setting up, operating, and tending welding, soldering, and brazing machines to produce high-quality welds on heavy gauge stainless and mild steel components. You will primarily perform MIG welding, including multi-pass welds, to fabricate compactors, pavement maintenance equipment, and paving machinery. The position requires careful interpretation of blueprints, precise layout and setup of components, and strict adherence to safety and quality standards in a busy fabrication shop environment. Responsibilities • Set up, operate, and tend welding, soldering, or brazing machines in a fabrication shop environment., • Perform MIG welding on heavy gauge stainless steel and mild steel components, including material up to one inch thick., • Execute multi-pass welds, including 3-pass welds, to meet structural and quality requirements., • Lay out, fit, and weld components according to blueprints and work instructions., • Interpret and follow blueprints and drawings to ensure accurate fabrication of compactors, pavement maintenance equipment, and paving machinery., • Apply knowledge of geometric dimensioning and tolerancing (GD&T) to ensure proper fit, alignment, and structural integrity of welded assemblies., • Use wire feed welding equipment and related tools safely and efficiently., • Maintain a clean and organized work area and handle materials such as stainless steel, mild steel, carbon steel, and structural steel appropriately., • Follow all safety procedures, including proper use of welding gear and adherence to guidelines for noise, ultraviolet exposure, and shop hazards., • Manage individual workload to support production goals and meet deadlines., • Collaborate with team members and supervisors to resolve fabrication issues and continuously improve welding quality.Essential Skills, • Minimum of 2+ years of MIG welding experience on heavy gauge steel., • Proficiency in MIG welding on stainless steel and mild steel, including multi-pass welds up to one inch thick., • Ability to weld accurately from blueprints and technical drawings., • Understanding of geometric dimensioning and tolerancing (GD&T)., • Experience in a fabrication or shop floor environment using wire feed welding equipment., • Capability to safely lay out, set up, and weld components according to specified requirements., • Strong blueprint reading skills for structural and sheet metal fabrication., • Commitment to following safety protocols in a welding and fabrication setting.Additional Skills & Qualifications, • Experience with flux core, TIG welding, stick welding, and other welding processes is beneficial., • Background in working with sheet metal, structural steel, and carbon steel components., • Familiarity with welding in a mechanic shop or non-assembly-line production environment., • Enrollment in or completion of a two-year welding program is considered a plus, and current students in such programs may be considered., • Ability to work effectively on 2nd or 3rd shift and manage tasks independently., • Attention to detail and quality in weld appearance, strength, and consistency.Why Work Here? You will join a large, established facility that manufactures and distributes the paving equipment commonly used on construction sites, offering exposure to a wide range of products and fabrication stages rather than repetitive assembly line work. The culture emphasizes respect and support for employees, with consistent weekly feedback from supervisors to help you grow and succeed. Major holidays are celebrated with events, gifts, or prizes, creating a positive and engaging workplace. Contract roles provide a clear pathway to permanent employment, giving you the opportunity to build a long-term career in a stable and well-organized environment. Work Environment The position is based on a shop floor and fabrication environment that operates like a mechanic shop rather than an assembly line, with work progressing through different stages from start to finish. You can expect occasional loud noises of 80 dB or higher and limited exposure to ultraviolet rays from welding arcs and plasma torches, making adherence to safety procedures essential. The company supplies all welding gear and equipment except steel-toed safety boots, which you must provide; if you own a preferred welding helmet, you are welcome to use it. The role is available on 2nd shift (2:00 p.m. – 10:00 p.m., Monday–Friday) and 3rd shift (10:00 p.m. – 6:00 a.m., Monday–Friday), offering structured hours in a professional, safety-focused fabrication environment. Job Type & Location This is a Contract to Hire position based out of Brooklyn Park, MN. Pay and Benefits The pay range for this position is $26.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Brooklyn Park,MN. Application Deadline This position is anticipated to close on Aug 4, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionPurposeUnder limited supervision, operates all welding equipment and performs position welding functions with a high degree of proficiency. Essential Job FunctionsReview daily welding production schedule with Production Lead to insure awareness of requirements and output required Read blue prints to determine required weld locations, components and layoutsOperate all position, stick and wire welding equipment used in the department Weld component parts as required referring to prints or product books as necessary Perform grinding, deburring and polishing duties required in the process of producing finished, high quality welding projects Report immediately to the supervisor any and all problems that may affect safety, equipment, tooling and or quality Inspect work periodically to insure that welds are consistent with approved levels of quantity and quality established by the company Manufacture prototype brackets to be used on new, changed or proposed products as requestedRepair any re-weld to German DIN/AWS standard and field weldingOperate bar code scanner/computerSet-up small fixtures as requiredOther duties as assignedRequirementsPhysical Demands:Pass Jager Eye examination, annuallyPerform work in the plant facility 100% of the timeLift up to 50 pounds, as neededEducation/Skills/Experience:Technical degree in Welding requiredMinimum 2 years welding experiencePass Schwing America, Inc. welding tests and maintain welding certification by passing periodic welding tests conducted by the Quality Control departmentKnowledge of German and American weld symbols requiredQualified to the required German and American Standards in all positionsQualified to German DIN EN StandardsQualified to Table 4.11 in the AWS D.1.1 code bookExcellent problem solving and trouble shooting skillsAbility to read blue printsFamiliarity with computers to look up work instructions, track labor and other tasks as needed

Job DescriptionExperienced Welder / Technician – New Brighton, MN | $25–$35/hr If you are a skilled welder who is serious about your craft and wants to work on specialized tanker trailers at one of the most respected shops in the Midwest, Universal Truck Service is hiring. Who We Are Universal Truck Service is a family-owned company that has been built on the belief that great service and quality are not a thing of the past. Founded in 2000 with a small shop in New Brighton, Universal Truck Service has grown into a multi-location operation covering heavy-duty truck repair, tanker and trailer services, body work, and commercial truck sales. Our New Brighton Tanker and Trailer Division is home to some of the most specialized work in the industry - and this Welder / Technician role sits at the center of it. A Day in the Life As a Welder / Technician at Universal Truck Service, roughly 30% of your time is spent on precision welding - TIG and MIG in all positions on stainless steel and aluminum - and the remaining 70% is mechanical work on tanker trailers. You will work on petroleum, chemical, pneumatic, asphalt, and non-code trailers. Universal Truck Service is willing to train the mechanical side for the right welder. If you are precise, capable of becoming weld-certified through x-ray examination, and ready to expand your skill set, this is your role. What You'll Do • Perform TIG and MIG welds in all positions on stainless steel and aluminum, • Set up welds and work toward x-ray examination certification on code barrels, • Perform mechanical repairs on tanker trailers including air disc and drum brakes, • Service electrical systems, valving, venting, and overfill systems, • Work on air and spring suspensions, hydraulic systems, and pump systems, • Maintain a clean and safe work environmentSchedule Full-time. Work-life balance is a core value at Universal Truck Service. What You Bring • Proven experience with TIG and MIG welding on stainless steel and aluminum in all positions, • Ability to set up and perform weld tests at time of interview, • Mechanical aptitude and willingness to learn tanker trailer systems, • Strong attention to detail and commitment to quality, • Valid driver's licenseWhat You Get, • $25–$35/hr depending on experience, • $3,000 sign-on bonus, • $1000- $1,500 performance bonus every 90 days (80% of team members hit it), • $300 tool and boot bonus every 90 days, • Medical, Dental, and Disability Insurance, • 401K with company match, • PTO accrual and Paid Holidays, • Tool and toolbox program with 2-year commitment, • Work-life balance, • Solid company culture - birthday recognition, team BBQs, holiday events and moreReady to Join the Team? Click to fill out our 3-minute application and a member of the Universal Truck Service team will be in touch within 24–48 hours. Note: A weld test on stainless steel and aluminum will be conducted at the time of interview. Job Posted by ApplicantPro

Job DescriptionBuild Equipment That Builds the World Schwing America is seeking an experienced Welders to join our manufacturing team in White Bear Lake, Minnesota. In this role, you'll fabricate and weld components used in industry-leading concrete pumps and heavy construction equipment while working in a clean, safety-focused manufacturing environment. If you take pride in producing high-quality welds, enjoy reading blueprints, and want to be part of a team that values craftsmanship and continuous improvement, we'd like to hear from you. What You'll Do • Perform MIG welding on heavy equipment components according to blueprints and weld specifications., • Read and interpret blueprints, weld symbols, and product drawings to determine proper weld locations and layouts., • Operate welding equipment while producing high-quality welds that meet German DIN and AWS standards., • Grind, deburr, polish, and finish welded components to company quality standards., • Inspect completed work to ensure accuracy, quality, and consistency., • Repair and rework welds when necessary., • Review daily production schedules with the Production Lead to meet production goals., • Report safety, quality, tooling, or equipment concerns promptly., • Utilize barcode scanners and computer systems to review work instructions and track labor., • Maintain a clean, organized, and safe work area., • Perform other duties as assigned.What You Bring, • Technical degree in Welding required., • Qualified to AWS D1.1., • Ability to pass Schwing America's weld test and maintain welding certification., • Experience reading and interpreting blueprints and weld symbols., • Strong production welding experience in a manufacturing environment., • Excellent troubleshooting and problem-solving skills., • Comfortable using computers to access work instructions and record production information., • Strong attention to detail and commitment to producing quality work., • Dependable attendance and strong work ethic.Physical Requirements, • Perform work on the manufacturing floor throughout the shift., • Lift up to 50 pounds as needed., • Pass an annual Jaeger Eye Examination.Why Join Schwing?, • Competitive pay, • 401(k) with company match, • Medical, Dental & Vision Insurance, • Company-paid Life Insurance, • Paid Time Off, • Tuition Reimbursement, • Opportunities for Advancement, • Stable, growing manufacturing company with a strong commitment to quality and employee development If you're looking for a long-term career where your welding skills make a direct impact on building world-class heavy equipment, apply today and become part of the Schwing America team.

Job Description Join Our Employee-Owned Team at Assurance Manufacturing! Assurance Manufacturing, a leader in precision sheet metal fabrication, stamping, machining, and assembly, is looking for talented individuals to join our employee-owned team. We operate in a modern manufacturing facility and are committed to providing comprehensive and rewarding work experience. We believe in sharing our success with our employees, which is why we offer an outstanding compensation and benefits package that includes: • Health & Wellness: Medical/HSA, Dental, Short-Term Disability (STD), and Long-Term Disability (LTD)., • Life Insurance: Basic Life and Voluntary Life coverage., • Retirement & Ownership: A robust 401k with company match and an Employee Stock Ownership Plan (ESOP), giving you a direct stake in our company's success., • Performance Incentives: Discretionary bonus potential. At Assurance Manufacturing, you're not just an employee; you're an owner. Come grow with us! Spot Welder Set Up Responsibilities: • Spot welding of metal components and assemblies using various techniques., • Install various equipment, tooling, and components., • Follow blueprints to meet production specifications., • Conduct tests to evaluate weld quality and tolerance., • Follows work order procedures and routings; gathers required tools and materials based on instructions, drawings, and specifications provided for the job., • Monitors the welding, fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Prepares, assembles, and fixtures parts to be welded., • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered. Follows Control of Nonconforming Product Procedure., • Follows procedures in relation to inspection of welded parts., • Crosstrain in other areas of the plant as necessary to meet production demands., • Adheres to all safety rules and guidelines., • Performs other related duties as assigned. Spot Welder Set Up Qualifications: • Completion of welding technical training that includes Spot, MIG and TIG welding., • Spot welding experience one or more year required., • Basic welding fundamentals and use of limited technique is required., • Ability to spot weld complex parts for jobs., • Ability to operate a spot welding machine., • Thorough understanding of machines and tools used in welding., • Basic understanding of technical plans, drawings, models and blueprints especially weld symbols., • Excellent ability to read and listen to assignments given in a variety of forms., • Basic understanding of mathematics as related to welding assignments., • Ability to measure parts with calipers and micrometers., • Ability to use rule, templates and fixed gauges., • Good teamwork skills., • Spot welding experience preferred., • Ability to pass a welding assessment. Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Assurance Manufacturing 9010 Evergreen Blvd NW, Coon Rapids, MN 55433 We participate in E-Verify Job Posted by ApplicantPro

Job Description WELDER FULL BENEFIT PACKAGE AVAILABLE AND AN OPPORTUNITY TO EARN UP TO 10% OF YOUR WAGES WITH OUR YEAR-END BONUS PROGRAM PLUS A $2,000.00 HIRING BONUS MUST BE HIRED BEFORE AUGUST 31 TO BE ELIGIBLE Starting Pay: $25.00/Hour - $30.00/Hour Working Schedule and Conditions: • Eight (8) hour days, Monday - Friday, • Occasional daily overtime and weekend work required, • Must work outside in varying temperatures and weather conditions, and daylight or darkness, • Duties occasionally performed indoors, • Duties occasionally performed in confined spaces, • Working on barge decks, barge covers, and in the cargo hold (hopper) Essential Functions: • Handle and use equipment and tools necessary to prep, weld, and repair barges, • Preference will be given to individuals proficient in stick and wire feed welding, • Preference will be given to individuals with the ability to weld in overhead, flat, and/or vertical locations Additional Functions: • Assist with barge cleaning as directed, • Handle lines and rigging to moor barges to docks and other barges, • Visually inspect tanks for excess water, • Operate pumps to remove excess water from tanks, • Operate Company equipment, • Perform other job duties as assigned, • Must be able to work well independently or as part of a team Physical Demands: • Climbing ladders and stairs, • Standing for extended periods of time, • Entering and working in confined spaces, • Repetitive bending, twisting, stooping, reaching, and stretching, • Lifting equipment ranging from less than ten (10lbs) to weights in excess of one hundred (100 lbs) pounds, • Walking on steel decks for extended periods of time Personal Protection Equipment (PPE): The use of PPE is required. Required PPE is provided by the Company. Must be able to wear: • Personal flotation devices, • Gloves, • Steel-toed boots, • Hard hats, • Ear and eye protection, • Welding protective equipment, • Weather dictated clothing, • Equipment designed to prevent inhaling of foreign substances Upper River Services is an equal opportunity employer and believes in equal opportunity for all employees and applicants. Accordingly, all employment decisions are based on the principles of equal opportunity. These decisions include recruitment, selection, promotion, transfer, discipline, compensation, benefits, training, and other personnel actions involving persons in all job titles and shall occur without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionWelder/FabricatorBuild Heavy-Duty Equipment. Join a Team That Invests in You. We're looking for a skilled Welder/Fabricator to join our growing team. In this role, you'll work on custom heavy-duty trucks and tractors, using your welding and fabrication expertise to build high-quality equipment that performs in the field every day. If you enjoy hands-on work, take pride in craftsmanship, and want to work in a modern, climate-controlled shop, we'd love to hear from you. What You'll Do • Perform heavy-gauge MIG welding and fabrication on heavy-duty trucks and tractor components., • Read and work from hand drawings and shop instructions., • Use fabrication equipment to cut, fit, and prepare materials., • Operate plasma cutters, drills, and other shop tools., • Inspect welds and finished assemblies to ensure quality and durability standards are met., • Collaborate with a team focused on producing custom, high-quality equipment.What We're Looking ForRequired Qualifications, • At least 2 years of heavy steel welding experience., • Strong experience with heavy-gauge MIG welding using wire-feed systems., • Experience operating a plasma torch., • Experience using an acetylene torch., • Ability to work independently and produce quality welds with minimal supervision.Preferred Qualifications, • Experience working on custom trucks or heavy equipment., • Exposure to hydraulic systems., • Comfortable using a variety of hand and power tools., • Fabrication experience beyond welding is a plus.Why You'll Love Working Here ✅ Modern, climate-controlled shop with heated floors for year-round comfort ✅ New equipment and tools to help you do your best work ✅ Voluntary life insurance and AD&D coverage for employees and dependents ✅ Generous paid time off including vacation, PTO, and sick leave ✅ Stable, full-time position with opportunities to expand your skills and grow your career Work Environment You'll work in a spacious, well-equipped mechanic and fabrication facility featuring multiple service bays, modern tools, and a clean, organized workspace. Our heated, climate-controlled building provides a comfortable environment no matter the season, allowing you to focus on producing quality work every day. If you're a welder who takes pride in building heavy-duty equipment and wants to work for a company that values quality, teamwork, and employee comfort, apply today. Job Type & Location This is a Permanent position based out of Saint Paul, MN. Pay and Benefits The pay range for this position is $25.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saint Paul,MN. Application Deadline This position is anticipated to close on Aug 5, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Overview Tradesmen International is immediately hiring experienced Flat Welders for projects located in the Coon Rapids, MN area. This is a first shift opportunity, and the pay rate is $25-28/hour based on experience and skill level. If you are a Flat Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Flux Core & MIG welding, • Use fabricating equipment such as press brakes, shears, etc, • Other tasks as assigned Responsibilities • Must pass basic flat weld test Flux & MIG Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job DescriptionAbout Lake Air Products Lake Air Products is a fast-growing contract manufacturer serving medical, aerospace & defense, industrial markets and more. We are committed to quality, performance, and building strong teams while proudly living by our Core Values: Customer Focus, Passion for Performance, and Right People – Best Teams. Position Summary We are looking for 2nd shift welders to join our growing Roseville, MN location. If you have TIG/MIG experience and enjoy working with your hands, this could be a great position for you. Essential Duties & Responsibilities • Lay out, position, and secure parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler, • Observe tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance, • Develops templates or tooling and other work aids to hold and align parts., • Determines required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques., • Examining finished products and spare parts and comparing them with samples to check whether the specifications are met., • Inspects grooves, angles, or gap allowances, using measuring instruments, • welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs Qualifications • High School Diploma or equivalent, • 7+ years of experience in TIG, MIG, and Tack-weld (TIG welding preferred), • Excellent people skills, with an ability to partner with a dynamic leadership team, • Personal qualities of integrity, credibility, and a commitment to the mission, • Ability to weld components in flat, vertical, or overhead positions., • Lift objects up to 50 pounds throughout the day, • Wear required personal protective equipment (PPE), • Reading blueprints and performing all necessary measurements Lake Air Products Offers: • Competitive Pay, • Full Benefits, • 401(k) Employer Match, • Paid Time Off (PTO) and Holiday Pay, • Gym Reimbursement, • Tuition Reimbursement Please note that this position is located our Roseville, MN facility and may be subject to export control regulations. Unless an exemption applies, candidate(s) must be a U.S. Person* within the meaning of the law or obtain an export control license. Candidates who do not meet the International Traffic in Arms Regulations (ITAR) requirements or choose not to pursue such positions are not disqualified from applying for other opportunities with Lake Air Products. Nothing in this posting should be interpreted as limiting applications based on nationality or citizenship status. *A U.S. Person under export control laws includes a U.S. citizen, U.S. national, U.S. permanent resident, or protected individual who has been lawfully admitted for temporary residence in the U.S. as a refugee or asylee under U.S. law. Apply Today! Join a company where your hard work, dedication, and growth matter. We look forward to meeting you! 3:30pm to 2:00am – Monday to Thursday (10-hour shift)

Job Description About Lake Air Products Lake Air Products is a fast-growing contract manufacturer serving medical, aerospace & defense, industrial markets and more. We are committed to quality, performance, and building strong teams while proudly living by our Core Values: Customer Focus, Passion for Performance, and Right People – Best Teams. Position Summary We are currently looking for a 2nd shift Spot Welder with set-up experience to join our growing Roseville, MN location. If you are experienced in sheet metal fabrication, this could be an excellent opportunity for you. Essential Duties & Responsibilities • Use Spot Welding equipment; apply two shaped copper alloy electrodes to concentrate welding current into a small "spot" and to simultaneously clamp the sheets together. Force a large current through the spot to melt the metal and form the weld., • Install proper electrodes on the spot-welding machine., • Adjusts control for proper heat, pressure settings, and timing of current., • Use the proper amount of heat to match the sheet's material properties, thickness, and type of electrodes., • Work from routings, prints, or instructions., • Inspect work using a micrometer, caliper, and precision measuring instruments., • Examines welded components for any defects., • Deliver the first piece to inspection for verification of dimensions and weld accuracy., • Responsible for producing the highest level of quality, utilizing control plans, customer drawings, and appropriate work instructions., • Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors Qualifications • High School Diploma or equivalent, • 2+ years’ experience in Spot Welding preferred, • Excellent people skills, with an ability to partner with the leadership team, • Personal qualities of integrity, credibility, and a commitment to the mission, • Flexible and able to multi-task; can work with an ambiguous, fast-moving environment, while also driving toward clarity and solutions; demonstrated resourcefulness in setting priorities and guiding investment in people and systems, • Bend and lift, loading and unloading work pieces into the machine, and move from one workstation to another, alternately sitting and standing Lake Air Products Offers: • Competitive Pay, • Full Benefits, • 401(k) Employer Match, • Paid Time Off (PTO) and Holiday Pay, • Gym Reimbursement, • Tuition Reimbursement Please note that if this position is located in our Roseville, MN facility, it may be subject to export control regulation. Unless an exemption applies, candidate(s) must be a U.S. Person* within the meaning of the law OR obtain an export control license. Candidates who do not meet the International Traffic in Arms Regulations (ITAR) requirements or choose not to pursue such positions are not disqualified from applying for other opportunities with Lake Air Products. Nothing in this posting should be interpreted as limiting applications based on nationality or citizenship status. *A U.S. Person under export control laws includes a U.S. citizen, U.S. national, U.S. permanent resident, or protected individual who has been lawfully admitted for temporary residence in the U.S. as a refugee or asylee under U.S. law. Apply Today! Join a company where your hard work, dedication, and growth matter. We look forward to meeting you! 3:30pm to 2:00am – Monday to Thursday (10-hour shift)

Job DescriptionDescription: Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, Minnesota Position: Pole Winder - 1st Shift Team: Winding Primary Objective of Position: A Pole Winder will set up, mount and insulate various wind jobs. Major Areas of Accountability: • Set up winding machine, mount conductor on dereeler, clamp, cut, fit and apply insulation as necessary., • Wind jobs such as one piece rotors and all sizes of field coils on fixtures or on poles up to the capacity of the winding machines., • Record weights on field poles., • Read prints & winding specifications., • Do layer, random and step windings, assemble fabricated and wound coils onto poles applying resin when required., • Apply epoxy to winding layers., • Set up and operate various blanking presses for field straps such as trimming, notching, piercing vent holes, mashing and coining corners and straightening., • Set up and operate automatic bonding machine to fuse flat copper sections into assembled coil and coil connectors, including pole cross oversee, set up to include adjusting various settings for individual copper., • Operate portable TIG welder to make minor repairs and coil leads when required., • Paint poles per process specs when required., • Set and operate ovens per specifications., • Works in other areas of the Winding Team skills matrix, may perform duties in the Winding Team skills matrix such as coil taping, coil manufacturing, VPI, and armature winding., • Demonstrates a commitment to Continuous Improvement by identifying opportunities in day to day work., • Performs to ISO 9001 Quality Standards and abides to OSHA and EPA regulations. Knowledge/Skills/Abilities: • High School degree (preferred) with a 1 year of manufacturing experience (preferred)., • Ability to be certified in overhead crane, Jib crane and forklift operation., • Must be able to read prints and winding specifications. Physical Requirements: • Routinely lifts and moves objects up to 20 lbs., • Occasionally lifts and moves objects up to 50 lbs., • Routinely ascends/descends ladders and stairs., • Occasionally works at heights or on platforms., • Occasionally positions self in various works spaces, including low, tight or confined spaces., • Routinely remains in a stationary position, often standing or sitting for prolonged periods of time., • Routinely uses repetitive motions including the wrists, hands or fingers to operate machinery or tools., • Routinely moves from one work station to another to accomplish tasks. Skills Matrix: • The Pole Winder position is part of the Winding Team skills Matrix. This position works as a team member utilizing and performing to the Winding Team skills matrix, which outlines the comprehensive skills in the Winding Team. Salary: • 1st shift salary range $20.00 hourly to $24.00 hourly, • Will compensate with experience. Position is full-time. Pay Types Voluntary weekend overtime. Saturday is paid at time and a half, Sundays are paid at double time! Job Type Monday – Friday, 1st shift 7:00am - 3:30pm Full-time (Union) Benefits • Medical, Dental & Vision Insurance eligible your 1st day on the job, • 401K with Match 1st of the month following hire, • Quarterly Bonus Program payout potential, • Company paid Holidays (13), • Paid Time Off (PTO) accrued, • Company paid Short & Long Term Disability, • Company paid Life Insurance, • Paid Birthday (use anytime throughout the year), • $6,000 annual Tuition Reimbursement program, • Company provided tools, • Uniforms (laundered), Safety Shoes & Glasses, • Secure, onsite free parking Company cannot provide sponsorship for this position Please, no agencies Requirements:

TKI Intermodal, LLC has an immediate opening for a full-time Welder / Metal Fabricator.

TKI Intermodal, LLC has an immediate opening for a full-time Welder / Metal Fabricator.

TKI Intermodal, LLC has an immediate opening for a full-time Welder / Metal Fabricator.

Aerotek - JobID: JP-005851421 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

Ferguson - - Responsibilities: Weld outlets onto steel pipe to serve the fire sprinkler industry; Perform specialty welding tasks; spool pieces, flanges, etc.Inspects work for defects, dimensions, alignment, end preparations, and seam splits in pipe; Maintains a clean and safe welding station while

Description: Job Title: Rack & Tool Maker (Welder/Fabricator) / Maintenance Technician- Experienced Company/Location: Nico Products / Minneapolis MN Shift: 6:00am-2:00pm Monday-Friday + OT as scheduled Wage: $28.50/hour + DOQ (Employment/staffing agencies - please do not reach out about this ad. We only hire direct.) This position is specific to the Production/ Industrial/ Manufacturing trade. Please make sure to read the ENTIRE AD, and if your skills meet these requirements, then apply. Pivotal position to our success. What We Do: Metal, by it's nature, wants to corrode. We run it through various processes to stop that, along with other cosmetic or functional applications to metal parts. Metal finishing and plating touches everything - medical devices, aerospace, defense, tools, hardware, and many other critical U.S. manufacturing fields. Most people don't know this industry exists. That's okay. We do! What to Know Before Applying: Attendance matters: We rely on our team being here when scheduled. Our success depends on employees that show up to work. That means showing up every day, on time, and not leaving early. We reward strong attendance with bonuses! Strict security protocols: Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas). Warehouse environment: Exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations. Career-oriented: You'll have the chance to grow with us if you bring a strong work ethic and initiative. Growth can be becoming an expert in the position, becoming a lead/trainer, changing departments, or going into a supervisor/manager role. It all depends on what interests the employee and the effort put forth by the employee. We conduct in-person interviews only: This position is located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad. Position Duties: The Rack & Tool Maker is responsible for fabricating, modifying, maintaining, and repairing metal racks, fixtures, jigs, and tools used in production processes. This role supports production efficiency, ensures parts are held or plated correctly, and contributes to the continuous improvement of manufacturing tooling systems in a high-security environment. Will work with other Maintenance Department employees towards ensuring the smooth operation of all machinery and equipment used in the plating/ manufacturing process. What are we looking for? The following duties and requirements can help determine if you are a good fit for us, and if we are a good fit for you. Attendance is CRITICAL to our success and need people that are committed to being at work, as scheduled. DUTIES: Perform metal fabrication tasks including cutting, welding, grinding, drilling, and assembly. Design, build, and repair custom racks, fixtures, and tools based on blueprints, verbal instruction or production needs. Collaborate with engineers, production staff, and quality assurance to develop efficient and ergonomic tooling solutions. Upholds company policies and procedures Reads Work Orders/Repair Orders Modify or repair existing racks and tooling to meet updated part designs or process changes. Conduct quality checks on tools and fixtures to ensure precision and durability. Maintain a clean and organized work area, ensuring compliance with safety and security protocols. Reads Work Orders/Repair Orders- Assist in the Maintenance Department as directed. Follow all safety protocols and regulations, including Lockout/Tagout (LOTO), to maintain a safe work environment Participate in continuous improvement initiatives and lean manufacturing activities- Other duties and responsibilities as assigned. Other duties and responsibilities as assigned SKILLS REQUIRED: High school diploma or GED 2 -5 years experience in tool making, fabrication, or industrial rack manufacturing Certification in machining, metal fabrication, or welding Ability to maintain a regular and reliable attendance record Fluently read, write, speak, and understand the English language Must be a US citizen or have authorization to work in the US Must be able to read a ruler/tape measure and analog clock Ability to pay attention to detail and follow written instructions Good organizational skills and the ability to follow instructions Basic math and geometry Proven welding knowledge/experience Ability to read and interpret blueprints, schematics, and technical drawings Strong problem-solving skills and the ability to work independently or as part of a team Excellent time management and organizational skills Knowledge of safety regulations and practices in an industrial setting Comfortable with computers, tablets, and some knowledge of MS Office What We Offer (Perks & Benefits) We invest in people who invest in their work. Competitive Pay and Signing Bonus Work-Life Balance : 4-day work week (Mon-Thurs) + overtime on Friday as needed Reviews & Raises : Performance reviews at 60 days, 6 months, then twice a year—raises available if expectations are met Bonuses : Quarterly profit-sharing + attendance rewards Paid Time Off : Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary Retirement Support : 401k with company contributions Insurance Coverage : Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more! Paid Extras : Uniforms, prescription safety glasses, safety boots, referral bonuses, and more APPLICATION PROCESS: Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected. No need to reach out and verify if the application was received . If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview. If you are selected for an interview, you will be contacted via text/email. ( As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.) Expect a response within 14 days of your application. Requirements: Security: This position operates within a secure manufacturing facility. All employees must adhere to strict security policies, including restrictions on personal electronic devices, access control, and documentation procedures. Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply! Work Authorization / Security Clearance: The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice. For more information on our company, visit: www.TheLindgrenGroup.com PI2542a8cbcdc7-29400-40464267

Twin City Staffing - - Responsibilities: MIG weld in all positions, including overhead; Fabricate custom products and components; Operate plasma cutters and various power tools; Install truck accessories and components; Assemble parts for hydraulic units.

Description: Job Title: Rack & Tool Maker (Welder/Fabricator) / Maintenance Technician- Experienced Company/Location: Nico Products / Minneapolis MN Shift: 6:00am-2:00pm Monday-Friday + OT as scheduled Wage: $28.

Zero-Max, Inc., a trusted leader for over 75 years specializes in the manufacturing of motion control and power transmission components. Our product offerings include Composite Disc Couplings, Servo Couplings, Offset Couplings, Torque Limiters, Right Angle Gear Drives, Linear Actuators, and Mechanical Variable Speed Drives. We deliver both off-the-shelf standard products and entirely custom designs tailored to specific application requirements. Our team is dedicated to providing innovative and reliable solutions to meet diverse engineering needs. Zero-Max is a newly renovated office and manufacturing facility located on scenic grounds in Plymouth, MN. We are proud of our employees' years of service and are dedicated to offering competitive benefits and pay, including: • Robust health, dental, and vision plans, • 401(k) plan with a generous 6% match plus a 4% discretionary profit-sharing plan, • Generous Paid Time Off (PTO) and paid holidays, • Employer paid disability insurance, • Training, mentorship, and coaching from leadership, • Healthy work/life balance, • Other fringe benefits in a fun and welcoming environment that sets us apart from most companies! Zero-Max is currently recruiting for a Maintenance And Tool Room Manager. The Maintenance And Tool Room Manager is responsible for all building and equipment improvements and maintenance. Designs, builds, and maintains required tooling and fixtures for production machining of all Zero-Max products; manages Tool Room and Maintenance employees. Essential Duties And Responsibilities Machine Shop • Plan, coordinate, and schedule all preventative maintenance and repair activities, • Analyze, diagnose, and repair CNC equipment, including mechanical, hydraulic, and electrical systems, • Plan and oversee all installation activities, • Analyze and diagnose machining and tooling issues, • Oversee and support TIG welding of products, • Perform TIG welding in absence of welder, • Ensure that safety program and initiatives are followed and recommend changes to ensure safety Tool Room • Design and build tools and fixtures for production machining, • Coordinate the machining and construction of tools, gauges, fixtures, etc., • Check tools to ensure that precision standards are met., • Requisition of the purchase of small tooling requirements., • Oversee critical spare part stock and orders components as necessary Facilities • Conduct regular inspections of facilities to detect and resolve problems, • Manage relationships with contractors and service providers, • Partner with leadership and assist with all shop and office projects, • Communicate openly with leadership team and inform them of potential problems and/or solutions Supervisory Responsibilities • Provide overall supervision of Tool Room and Maintenance employees, • Responsible for all aspects of performance management including interviewing, hiring, training, planning, assigning and directing work in addition to appraising performance, resolving problems, and acting on opportunities, • Demonstrate our core values of best-in-class service and solutions, hold ourselves accountable, and do the right thing Requirements Essential Knowledge, Skills and Abilities • Knowledge and proven success of preventive maintenance practices in a machining environment., • Ability to troubleshoot issues and coordinate timely solutions, • Ability to manage multiple priorities, • Skill in maintaining accurate records, logs, and documentation, • Ability to work independently and make sound decisions, • Strong customer service focus when working with employees at all levels and areas of the building, and vendors, • Strong communication skills at all levels, • Ability to foster a safe and positive environment, • Strong organizational skills, • Project management skills, • Contract management skills for overseeing vendor agreements, • Experience supervising staff, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plain and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Education and/or Experience • High School or equivalent required; with some appropriate post-secondary related education, • Eight to ten years of general machine shop experience including welding, and/or three to five years of tool & die experience, and/or three to five years maintenance experience., • Three to five years supervisory experience., • Must have experience maintaining CNC Mills and Lathes., • ERP experience; Epicor a plus, • Microsoft Office experience Physical Demands And Work Environment • Typical of a Manufacturing Environment, • While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration., • The noise level in the work environment is usually loud., • Regularly required to stand; use hands to finger, handle, or feel objects, tool, or controls; and talk or hear., • Required to walk, sit, and reach with hands and arms., • Occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Zero-Max is proud to be an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. Veteran/Disability

Join Our Employee-Owned Team at Assurance Manufacturing! Assurance Manufacturing, a leader in precision sheet metal fabrication, stamping, machining, and assembly, is looking for talented individuals to join our employee-owned team. We operate in a modern manufacturing facility and are committed to providing comprehensive and rewarding work experience. We believe in sharing our success with our employees, which is why we offer an outstanding compensation and benefits package that includes: • Health & Wellness: Medical/HSA, Dental, Short-Term Disability (STD), and Long-Term Disability (LTD)., • Life Insurance: Basic Life and Voluntary Life coverage., • Retirement & Ownership: A robust 401k with company match and an Employee Stock Ownership Plan (ESOP), giving you a direct stake in our company's success., • Performance Incentives: Discretionary bonus potential. At Assurance Manufacturing, you're not just an employee; you're an owner. Come grow with us! • Spot welding of metal components and assemblies using various techniques., • Install various equipment, tooling, and components., • Follow blueprints to meet production specifications., • Conduct tests to evaluate weld quality and tolerance., • Follows work order procedures and routings; gathers required tools and materials based on instructions, drawings, and specifications provided for the job., • Monitors the welding, fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Prepares, assembles, and fixtures parts to be welded., • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered. Follows Control of Nonconforming Product Procedure., • Follows procedures in relation to inspection of welded parts., • Crosstrain in other areas of the plant as necessary to meet production demands., • Adheres to all safety rules and guidelines., • Performs other related duties as assigned., • Completion of welding technical training that includes Spot, MIG and TIG welding., • Spot welding experience one or more year required., • Basic welding fundamentals and use of limited technique is required., • Ability to spot weld complex parts for jobs., • Ability to operate a spot welding machine., • Thorough understanding of machines and tools used in welding., • Basic understanding of technical plans, drawings, models and blueprints especially weld symbols., • Excellent ability to read and listen to assignments given in a variety of forms., • Basic understanding of mathematics as related to welding assignments., • Ability to measure parts with calipers and micrometers., • Ability to use rule, templates and fixed gauges., • Good teamwork skills., • Spot welding experience preferred., • Ability to pass a welding assessment. Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

This position is based in Hammond, WI About ArchKey ArchKey is one of the nation's largest privately held specialty trade installation and integrated facility service companies. We are a leader in designing, building and maintaining electrical, technologies and specialty systems. We're the POWER behind making the improbable possible. We're electrifying the nation, energizing the future and bringing communities to life like never before. What we do today shapes the vision of tomorrow. Our work impacts lives long after the building is done. This means we are committed to building in ways that are not just technologically advanced, but sustainable, scalable and equitable by all. We're not just energizing infrastructure, we're energizing careers, communities, and the future. Made up of the brightest minds in the industry, our team is our greatest asset bringing knowledge, skills, and experience to every project. This is more than a call to join us, it's an invitation to be part of a visionary journey, to grow with us as we scale. About the Position Join our dynamic team as an Installer in our Prefabrication Shop and play a vital role in bringing innovative construction projects to life! In this energetic position, you will be responsible for assembling, installing, and verifying prefabricated components with precision and efficiency. Entry level candidates welcome to apply. You will help ensure that each project meets quality standards and is completed on schedule. This role offers an exciting opportunity to work in a fast-paced environment where your skills directly contribute to building solutions that make a difference. Our Ideal Candidate • Can flex and adapt with the growing needs of the business., • Can work autonomously and creatively solve problems., • Has a growth mindset and is always looking to continually learn and grow. Day in the Life • Fabricate metal structures by cutting, bending, assembling, and welding components according to project requirements., • Read and interpret blueprints, schematics, and technical drawings to guide fabrication processes., • Operate various power tools, hand tools, plasma cutters, press brake machines, and machining equipment to shape sheet metal and ductwork components., • Conduct rigging and pipe threading tasks for assembly or installation purposes., • Maintain a clean and safe work environment by adhering to safety protocols related to construction site practices, mechanical handling, and use of power tools. Minimum Qualifications • High School diploma or equivalent, • Trade school diploma/certification preferred, • Ability to work as a team with a positive attitude and strong work ethic., • Open to learning new skills and willingly accepts feedback for continuous improvement., • Dedicated team player with strong customer service orientation.

Tradesmen International is immediately hiring experienced Flat Welders for projects located in the Coon Rapids, MN area. This is a first shift opportunity, and the pay rate is $25-28/hour based on experience and skill level. If you are a Flat Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Flux Core & MIG welding, • Use fabricating equipment such as press brakes, shears, etc, • Other tasks as assigned Requirements: • Must pass basic flat weld test Flux & MIG Company Details: Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability Be Safe from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other "up front" costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Location: US-MN-COON RAPIDS

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc.When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other.We are the makers, problem solvers, and future world builders who are creating stronge

GRE HERC Services LLC (GHS) has an opening for a full-time.GHS operates the Hennepin Energy Recovery Center (HERC), on behalf of Hennepin County.HERC provides the county with cost effective resource recovery in harmony with a sustainable environment.We help the county manage waste by burning garbage