Trabajos welder en Naperville, IllinoisCrear alertas

Job DescriptionRate of Pay: $20.00 to $24.00 per hour (paid weekly) Overtime Rate: $30.00 to $36.00 per hour 1st Shift Schedule: • Monday thru Friday; 7:00am to 3:30pm., • Overtime always available; paid breaks. JOB SUMMARY: • The primary tasks of the Fabrication Welder involve building machine frames and components out of structural steel, followed by tearing down completed machines to prepare for transport., • MIG welding and fabrication of machine frames and components that consist of light gauge sheet metal to heavy gauge tube, flat bar and I-Beam., • Fabricating industrial ovens, safety guarding, vacuum tanks, swing doors, fan brackets, catwalks., • Grinding and finishing completed products., • Perform quality checks on finished components., • Installing finished components into machine structures., • Disassembling machines for painting and shipping., • Material handling with sit-down forklifts and overhead cranes. BENEFITS: • Training and teaching provided to learn a new trade., • Heavy promotion from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing available upon reaching qualified service time., • Reimbursement for qualified technical training., • Easily accessible and modern facility., • Clean environment with well-maintained equipment., • Stability of industry-leading company in business 40 years., • Equal opportunity employer; trade school graduates and veterans encouraged. DESIRED SKILLS: • MIG welding and/or fabrication experience., • Ability to read and interpret engineering blueprints (or ability to learn)., • Experience with saws, shears, drill presses, forklifts, and cranes are a plus.

Job DescriptionShape Flight-Critical Parts. Grow Your Career. Imagine starting your shift in a climate-controlled facility, badge in, review your machine status board, and open the day’s blueprints and process sheets. You mount freshly machined chuck jaws, lock tooling into the turret, upload a program, and dial in offsets to hold tight tolerances. A quick first-piece inspection with preset gauges confirms you’re on target. You record results in our ERP system, collaborate with a programmer and your supervisor to fine-tune a tricky feature, then rotate to another work center to support the team. By day’s end, you’ve produced precision components that go into engine systems, flight controls, landing gear, and airframe structures used by major engine and airframe OEMs, tier suppliers, and aircraft operators worldwide. About Regal Rexnord Aerospace We’re part of Regal Rexnord’s rapidly growing Aerospace & Defense business, supplying high‑performance spherical and cylindrical bearings, mechanical seals, gears, and electrical components for commercial air transport markets. Join a winning team where your work quite literally helps keep aircraft in the sky. What you’ll do • Set up and run multiple CNC machines (lathe, mill, and/or resistance spot welding) to perform turning, drilling, milling, tapping, or spot welding within demanding tolerances., • Work from process sheets, setup sheets/cards, blueprints, machine status boards, and clear verbal/written instructions., • Machine, install, or re‑cut chuck jaws; insert and secure tooling in machine turrets; use hand tools and manual machines when needed., • Download/upload CNC programs and make minor program edits; adjust offsets for material, tooling, and machine conditions., • Troubleshoot basic issues and make appropriate adjustments to maintain quality and throughput., • Set and verify preset gauges for proper calibration; inspect your own work and, at times, the work of other machinists; complete all required documentation., • Operate multiple machines and rotate through various department work centers as production needs shift., • Collaborate with supervisors, programmers, and support teams to resolve problems; support continuous improvement/RBS activities., • Enter production and quality data into the ERP system., • Load and unload component piece parts up to 25 lbs.What you’ll bring, • Previous experience and demonstrated proficiency operating CNC lathes, CNC mills, or a resistance spot welder (any combination of two), with intermediate-level setup capability., • Minimum of 2 years of related experience plus strong knowledge of CNC machining principles and methods., • High school diploma or equivalent experience., • Able to read/interpret English work instructions and blueprints; solid basic math skills., • External candidates must pass a Machinist test that measures mechanical aptitude., • Physical ability to stand for an entire shift and lift up to 50 lbs; frequent handling of light materials while setting up, inspecting, and adjusting machines.Compensation, perks, and extras, • Hourly pay based on experience: $24.00–$33.00/hr, • $4,000 sign-on bonus, • Day-one benefits including a competitive package (Medical, Dental, Vision, STD, LTD, AD&D, Life Insurance) and Matching 401(k); HSA & FSA savings accounts, • $2/hr shift differential for 2nd & 3rd shift, • Educational reimbursement, • Climate-controlled workplaceCompliance & EEO “Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a ‘U.S. Person’, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position.” Equal Opportunity Employer – Minority/Female/Disability/Veteran Ready to build what helps the world fly? If precision, problem-solving, and teamwork motivate you, we’d love to hear from you.

Job Description Come fly with Regal Rexnord and watch your career soar! We are growing! Join a company that offers excellent opportunities to grow your career. Based on experience we will offer $23.00-$30.00/Hr., along with a very competitive benefit package, including 401(k) with a match that starts day one. We are in a climate-controlled building. Regal Rexnord's Aerospace and Defense business is on an upward trajectory, we are rapidly growing, and we have opportunities to add new team members. Are you interested in joining a growing team with a fantastic culture that is offering a $4,000 sign-on bonus. Win! 2nd shift: 2pm-10pm Mon-Fri 3rd shift: 10pm-6am Sun-Thur Machinist Key Accountabilities • Work from process sheets, blueprints, setup sheets, setup cards, machine status boards, and verbal as well as written instructions., • Machine and install or re-cut chuck jaws as required., • Insert and secure tooling in machine turrets and preform machine set ups., • Download and upload programs into machine and make minor programming adjustments as needed., • Operate different types of computerized numerical controls to manufacture a finished machined product by performing a wide range of machining operations within tight tolerances., • Inspect own work for correct dimensions and ensure that company quality and quantity standards are maintained and complete required documentation. Will be required to inspect the work of other machinists., • May be required to operate multiple machines and rotating departments., • Enters data into ERP system., • Load and unload component piece parts with weights up to 25 lbs, • Other duties as assigned. Qualifications "Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a 'U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position." • Previous experience and demonstrated proficiency in operating CNC lathe, CNC mill machines, or resistance spot welder (any combination of two machines), with intermediate knowledge and experience with setting up machines., • Requires a high school education or equivalent experience., • Must be reliable with minimal call-offs during the year, we value and expect good attendance, • Minimum of 2 years of related experience, and knowledge of machining principles and methods for computer numerical controlled machine tools required, • Demonstrated ability to perform basic mathematical calculations., • Must be able to read and interpret work instructions and blueprints in English., • External candidates will be required to pass a Machinist test which measures mechanical aptitude. Compensation Based on Experience / Skills: $23.00 to $30.00/hr. Rewards • Matching 401(k) contribution, • Medical/Dental/Vision Insurance, • Short-Term and Long-Term Disability Insurance, • Accidental Death and Dismemberment Insurance, • Flexible Spending Accounts (Medical and Dependent Care) & Health Savings Accounts, • Critical illness and Accident Insurance, as well as Life Insurance, and an EAP Educational Reimbursement Equal Employment Opportunity Employer: Female/Sexual Orientation/Gender Identity/Minority/Veteran/Disabled Empty heading Benefits • Medical, Dental, Vision and Prescription Drug Coverage, • Spending accounts (HSA, Health Care FSA and Dependent Care FSA), • Paid Time Off and Holidays, • 401k Retirement Plan with Matching Employer Contributions, • Life and Accidental Death & Dismemberment (AD&D) Insurance, • Paid Leaves, • Tuition Assistance About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email Recruiting@RegalRexnord.com. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or to submit an online application, please e-mail Recruiting@RegalRexnord.com Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Job Description As a Welding Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in the industry will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern welding technology. What We Offer: $36 - $38 per hour Weekends OFF Paid Training Tuition Waiver: Enjoy a tuition waiver after 6 months of employment for you AND your immediate family offered at UTI and Concorde campuses Paid Time Off: Competitive paid time off programs for employees (Vacation, Sick, Flexible, Holiday) 401K Retirement Matching Paid Parental Leave: 4 weeks of paid leave for new parents Competitive Insurance: Health, vision, and dental coverage for you and your dependents Pet Insurance: Competitive coverage for your furry family members through ASPCA Health Plan Enrollment: Eligibility starts first of the month following completing one full month of employment Responsibilities • Inspire and Educate:Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training:Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship:Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Safety First:Instill the importance of safety procedures and best practices to ensure a secure working environment for students. Qualifications, • Education: High school diploma or GED (required), • Experience: must have at least 3 years of work experience as a welder within the past 10 years, • Technical Skills: MIG, TIG, stick and flux-cored welding, oxy-acetylene torch work, plasma cutting, and brazing, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff, • Patience and Empathy: A patient and empathetic approach to teaching, understanding that every student learns at their own pace

Job Description FABRICATOR / MIG WELDER 1st Shift Schedule: Monday thru Friday: 6:45am - 3:15pm Rate of Pay: $20.00 to $24.00 per hour (paid weekly) Location: Carol Stream, IL Our client is an industry-leading Machine Manufacturer serving the plastics industry. Established for over 40 years, the client is a privately-owned and operated business designing and building custom thermoforming machinery. Our client is experiencing growth and is looking to attract talented and motivated individuals to join our team. JOB SUMMARY: The primary tasks of the Fabrication Welder involve building machine frames and components out of structural steel, followed by tearing down completed machines to prepare for transport. • MIG welding and fabrication of machine frames and components that consist of light gauge sheet metal to heavy gauge tube, flat bar and I-Beam • Fabricating industrial ovens, safety guarding, vacuum tanks, swing doors, fan brackets, catwalks, • Grinding and finishing completed products, • Perform quality checks on finished components, • Installing finished components into machine structures, • Disassembling machines for painting and shipping, • Material handling with sit-down forklifts and overhead cranes BENEFITS: • Training and teaching provided to learn a new trade, • Heavy promoting from within; multiple career progression paths, • Annual performance review and rate increase, • Earned vacation time and paid holidays, • Health coverage available, • Purchase assistance for required personal equipment, • Teammate appreciation events, • Referral pay for referring a friend or colleague, • Reimbursement for qualified technical training, • Easily accessible and modern facility, • Clean environment with well-maintained equipment, • Equal opportunity employer; trade school graduates and veterans encouraged DESIRED SKILLS: • MIG welding and/or fabrication experience, • Ability to read and interpret engineering blueprints (or ability to learn), • Experience with saws, shears, drill presses, forklifts, and cranes are a plus Company DescriptionJust In Time Staffing seeks to pair top candidates with opportunities that will be mutually beneficial for both them and the employers.Just In Time Staffing seeks to pair top candidates with opportunities that will be mutually beneficial for both them and the employers.

Job Description Welder II As a Welder II you will: • Assemble, align, square up, fit, stiffen and tack weld a variety of subassemblies and assemblies of moderate to advanced complexity using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment, • Fit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assembly, • Set up and regulate pressure for oxyacetylene torch, • Select electrode size and type, tips and welding rod or wire as required, • Regulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals, • Check and straighten gasket surfaces and grind excess weld from finished work, • Lay out and secure work which may involve heavy parts and assemblies. Regulate current and voltage for proper penetration and fusion of similar and dissimilar metals, • Perform moderate to advanced Mig/Tig Welding in various positions as required, • Perform preventive maintenance procedures as needed, • Provide personal tools as required, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of welding tasks as needed, • Inspect all work and insure it meets requirements prior to passing it on to the next operation, • Document actions by completing production and quality forms, • Train others on proper welding procedures and techniques. We are looking for someone who: • Holds a High School diploma, GED or equivalent work experience, • Has at least one year of formal welding training or the equivalent level of experience, • Has 3 years of welding experience in a manufacturing environment, • Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipment, • Must be able to read and interpret Drawings and Bills of Material, • Must have basic computer skills, • Must be able to perform Mig and Tig welding in various positions The physical demands of the job are: • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent, • Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists, • Must remain medical cleared to wear PAPR or SAR welding respirator helmet What we offer you: Pay Range is typically between $27 - $30 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation, • Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job DescriptionRate of Pay: $20.00 to $24.00 per hour (paid weekly) Overtime Rate: $30.00 to $36.00 per hour 2nd Shift Schedule: • Monday thru Friday; 3:45pm to 12:15am., • Overtime is always available; paid breaks. JOB SUMMARY: • The primary tasks of the Fabrication Welder involve building machine frames and components out of structural steel, followed by tearing down completed machines to prepare for transport., • MIG welding and fabrication of machine frames and components that consist of light gauge sheet metal to heavy gauge tube, flat bar, and I-Beam., • Fabricating industrial ovens, safety guarding, vacuum tanks, swing doors, fan brackets, and catwalks., • Grinding and finishing completed products., • Perform quality checks on finished components., • Installing finished components into machine structures., • Disassembling machines for painting and shipping., • Material handling with sit-down forklifts and overhead cranes. BENEFITS: • Training and teaching provided to learn a new trade., • Heavy promotion from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage is available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing is available upon reaching qualified service time., • Reimbursement for qualified technical training., • Easily accessible and has modern facilities., • Clean environment with well-maintained equipment., • Stability of an industry-leading company in business for 40 years., • Equal opportunity employer; trade school graduates and veterans encouraged. DESIRED SKILLS: • MIG welding and/or fabrication experience., • Ability to read and interpret engineering blueprints. (or ability to learn)., • Experience with saws, shears, drill presses, forklifts, and cranes is a plus. CLOSING: Thank you for your interest in joining our team. If you would like to apply or find out more about this position and our company, please contact us at jobs@maacmachinery.com or call 630-665-1700.

Job Description FABRICATOR / MIG WELDER 1st Shift Schedule: Monday thru Friday: 6:45am - 3:15pm Rate of Pay: $20.00 to $24.00 per hour (paid weekly) Location: Carol Stream, IL Requirements: Resume, Interview, Authorized to work in the U.S. Our client is an industry-leading Machine Manufacturer serving the plastics industry. Established for over 40 years, the client is a privately-owned and operated business designing and building custom thermoforming machinery. Our client is experiencing growth and is looking to attract talented and motivated individuals to join our team. JOB SUMMARY: The primary tasks of the Fabrication Welder involve building machine frames and components out of structural steel, followed by tearing down completed machines to prepare for transport. • MIG welding and fabrication of machine frames and components that consist of light gauge sheet metal to heavy gauge tube, flat bar and I-Beam • Fabricating industrial ovens, safety guarding, vacuum tanks, swing doors, fan brackets, catwalks, • Grinding and finishing completed products, • Perform quality checks on finished components, • Installing finished components into machine structures, • Disassembling machines for painting and shipping, • Material handling with sit-down forklifts and overhead cranes BENEFITS: • Training and teaching provided to learn a new trade, • Heavy promoting from within; multiple career progression paths, • Annual performance review and rate increase, • Earned vacation time and paid holidays, • Health coverage available, • Purchase assistance for required personal equipment, • Teammate appreciation events, • Referral pay for referring a friend or colleague, • Reimbursement for qualified technical training, • Easily accessible and modern facility, • Clean environment with well-maintained equipment, • Equal opportunity employer; trade school graduates and veterans encouraged DESIRED SKILLS: • MIG welding and/or fabrication experience, • Ability to read and interpret engineering blueprints (or ability to learn), • Experience with saws, shears, drill presses, forklifts, and cranes are a plus Company DescriptionJust In Time Staffing seeks to pair top candidates with opportunities that will be mutually beneficial for both them and the employers.Just In Time Staffing seeks to pair top candidates with opportunities that will be mutually beneficial for both them and the employers.

Job Description Title: Welder III Status: Full Time Position - Hourly non-exempt Company Profile: Eaglestone is a premier provider of custom conveyors and equipment to food-related and other industries. Founded in 1990, EAGLESTONE continues to grow and is a recognized leader in designing and manufacturing the highest quality equipment in the industry. Job Description: We are seeking a highly talented and expert Welder III who has proven, extensive experience with industrial and construction equipment. You will be responsible for performing unusual and difficult horizontal and vertical welding operations on a broad range of metals and alloys to produce a wide variety of large and complex units with high strength and pressure requirements. You will need to be able to expertly interpret blueprints, plan complex welding sequences, and deeply understand our conveyor materials and products. Responsibilities: • Read and interpret complex blueprints, schematics, and detailed repair drawings related to equipment and machinery., • Plan welding sequences, select electrode type and size, current, and voltage to achieve proper penetration and fusion of dissimilar metals., • Align parts to exacting tolerances and secure welds of maximum strength with minimum distortion, often working in confined areas., • Repairs and fabricates various complex items and equipment using cutting, burning, and welding techniques and equipment., • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Instruct, direct, train, and assist lower graded and entry-level welders., • Prepares, assembles, and tacks weld parts and surfaces to be welded., • Maintained, organized, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered., • Travel to job sites to assist with advanced installation or complex customer concerns., • Adhere to all Safety policies and procedures continuing to promote the Company's culture of providing a safe work environment., • Maintain a positive and proactive attitude towards all colleagues, members of Management, and customers., • Ability to work on other duties as assigned by supervisor or manager. Skills/Requirements: • Advanced understanding of mathematics as related to complex welding assignments, • Strong technical knowledge and high proficiency in troubleshooting complex mechanical and welding systems., • Ability to work independently with little to no supervision and make sound decisions in a fast-paced on-site environment., • Effective communication skills to interact with customers, leadership, and Team Members., • Detail oriented with exceptional organizational and time management abilities., • Flexibility to work outside regular business hours and travel as required., • Bachelor's Degree in equivalent field or 5+ years of relevant, high-level welding experience., • Reliable transportation to and from work and customer sites., • Valid driver's license., • Ability to lift up to 50 lbs occasionally Compensation: $33.00 - $37.00 • Ability for some overtime throughout the year depending on business needs., • Paid weekly in arrears each Friday. Benefits: • Eaglestone pays approximately 70% of Team Member’s medical, dental, and vision insurance - eligible on the first day of the month following 2 full months of employment., • Short Term Disability, • Life Insurance, • Eaglestone matches 40% of Team Member’s contribution up to 5% of Team Member’s pay - eligible after 60 days of employment., • Nine (9) paid holidays., • Tuition reimbursement., • Generous PTO and Paid Holidays, • Extensive Company bonus pay out potential including Company Profit Sharing and Quarterly bonus incentives Work Location and Schedule: • 1560 Frontenac Road, Naperville IL, 60564, • In office Monday through Friday with occasional weekend work due to business needs Eaglestone offers competitive compensation and benefits packages, along with opportunities for professional growth and development. If you are a highly skilled and motivated individual with a passion for technical problem-solving and team leadership. We would love to hear from you. Due to the expected high volume of applicants for this role, EAGLESTONE Inc. will only contact individuals who possess all key requirements and skills. We want to thank all applicants for their interest. Eaglestone Inc. is an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. All employment decisions are decided on the basis of qualifications, merit, and business need. If you need assistance or an accommodation due to a disability, you may contact us. Eaglestone Inc. is proud to be a Drug Free Workplace. All offers of employment are conditioned upon the candidate passing a pre-employment drug test.

Job Description National Carwash Solutions has grown over the past 45 years to become North America’s largest equipment, service, and cleaning solutions provider in the car wash industry. NCS's bundled solutions allow you to customize services to get exactly what you need, when you need it, for a solution that truly benefits you and your business. From product assembly, installation and service, our teams are here to help every step of the way. Come join us for an extraordinary career in a high growth, team-oriented company! MUST be experienced in MIG and TIG welding with steel Pay Range: $21 - $35 per hour 1st Shift is from 6AM - 2:30PM or 7AM - 3:30PM We are interested in every qualified candidate who is eligible to work in the United States. However, we are not currently able to sponsor work visas. This position requires the candidate to be available to work in-person in our Bolingbrook, IL facility. As a Welder, you will be under the direction of the department Supervisor. Successful Welder candidates will be skilled in MIG & TIG welding of aluminum or stainless-steel assemblies. As a Welder you should be familiar with and capable of using various types of welding equipment. Job Duties: • Lay out, position, align and fit together parts of metal according to blueprints sketches in preparation for welding, • Perform MIG or stick welding of steel assemblies and operates cutting torch, • Will use crane on regular basis for moving parts, • Welds in flat, horizontal, vertical, or overhead positions, • Ensure that parts received are of satisfactory quality and that work performed meets production standards, • Discontinue work process to immediately notify supervisor of any/all quality defects, • Record and report work order information and production times as required, • Maintain clean and orderly working area at all times, • Leave equipment and materials in proper place and order at the end of shift, • Comply with all applicable OSHA, EPA, local regulatory laws, and company safety policies, • Management retains the discretion to add or change the duties of this position at any time Qualifications: • High school diploma or equivalent, • Minimum of 4 years’ welding experience in MIG and TIG., • Ability to pass a weld test and facility respiratory requirements, • Ability to use basic math, writing, and computer skills, • Ability to speak, write, read, and comprehend procedures in English, • Ability to safely operate various hand and power tools, • Ability to work assigned hours plus overtime as needed Physical Requirements: • May stand for prolonged periods, • May stoop, bend, reach, walk; perform repetitive motions using hands to grasp, push, pull or do fine manipulations, • Must have adequate sight to read blueprints, work orders and other engineering and manufacturing documents, • Ability to lift light to medium weight up to 75 lbs. Grow your career supported by an energized and passionate team, professional development, training, flexibility and opportunities for advancement. We offer competitive wages and benefits including comprehensive health, dental and vision coverage, matching 401(k), and more. National Carwash Solutions is a proud equal opportunity employer. We are a drug free, EEO employer committed to a diverse workforce. We will consider all qualified candidates regardless of race, color, national origin, sex age, marital status, personal appearance, sexual orientation, gender identity, family responsibilities, disability, education, political affiliation or veteran status.

Job Description Welder II As a Welder II you will: • Assemble, align, square up, fit, stiffen and tack weld a variety of subassemblies and assemblies of moderate to advanced complexity using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment, • Fit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assembly, • Set up and regulate pressure for oxyacetylene torch, • Select electrode size and type, tips and welding rod or wire as required, • Regulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals, • Check and straighten gasket surfaces and grind excess weld from finished work, • Lay out and secure work which may involve heavy parts and assemblies. Regulate current and voltage for proper penetration and fusion of similar and dissimilar metals, • Perform moderate to advanced Mig/Tig Welding in various positions as required, • Perform preventive maintenance procedures as needed, • Provide personal tools as required, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of welding tasks as needed, • Inspect all work and insure it meets requirements prior to passing it on to the next operation, • Document actions by completing production and quality forms, • Train others on proper welding procedures and techniques. We are looking for someone who: • Holds a High School diploma, GED or equivalent work experience, • Has at least one year of formal welding training or the equivalent level of experience, • Has 3 years of welding experience in a manufacturing environment, • Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipment, • Must be able to read and interpret Drawings and Bills of Material, • Must have basic computer skills, • Must be able to perform Mig and Tig welding in various positions The physical demands of the job are: • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent, • Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists, • Must remain medical cleared to wear PAPR or SAR welding respirator helmet What we offer you: Pay Range is typically between $27 - $30 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation, • Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job DescriptionRate of Pay: $25.00 to $28.00 per hour (paid weekly).Overtime Rate: $37.50 to $42.00 per hour. 2nd Shift Schedule: • Monday thru Friday; 3:45pm to 12:15am., • Overtime always available; paid breaks. JOB SUMMARY: Ideally MAAC is looking for an individual who is a strong fabricator/welder, with some supervisory experience, who after an introductory training period of hands-on production work, would transition into a lead role. The Lead Fabricator is a full-time teammate who can lead and assist team members to meet production goals with a focus on quality and safety, along with training new co-workers to become better fabricators and welders. The primary tasks to oversee consist of building machine frames and components out of structural steel and tearing down completed machines in preparation for painting and shipping. This leader must have the ability to delegate tasks among crews and follow up on assignments to assure quality standards and production timelines are met. • Fabrication/welding and learning of machine designs and components for initial months., • Lead and coordinate fabrication, welding, and component assembly tasks., • Monitor teammate performance and offer teaching moments., • Assure quality of manufactured and assembled items., • Remain on target with operational schedules and company objectives., • Communicate with peers to maximize workflow efficiencies., • Maintain a safe working environment free of hazards and equipment concerns., • Assure teammates are motivated and engaged in their work efforts. BENEFITS: • Training and teaching provided to learn a new trade., • Heavy promoting from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing available upon reaching qualified service time., • Reimbursement for qualified technical training., • Easily accessible and modern facility., • Clean environment with well-maintained equipment., • Stability of industry-leading company in business 40 years., • Equal opportunity employer; trade school graduates and veterans encouraged. DESIRED SKILLS: • Minimum of 4 years of fabrication experience with various metals., • Basic understanding of Microsoft Outlook and Word., • Can communicate, problem-solve and have strong attention to detail., • Ability to prepare work plans and fabrication layouts., • Ability to read and interpret engineering blueprints., • Proficient in welding and fabrication skills., • Working knowledge of saw, shear, drill press, forklift and overhead crane are all a plus., • Bilingual applicants encouraged (English + Spanish). CLOSING: Thank you for your interest in joining our team. If you would like to apply or find out more about this position and our company, please contact us at jobs@maacmachinery.com or call 630-665-1700.

Job Description Welder II As a Welder II you will: • Assemble, align, square up, fit, stiffen and tack weld a variety of subassemblies and assemblies of moderate to advanced complexity using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment, • Fit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assembly, • Set up and regulate pressure for oxyacetylene torch, • Select electrode size and type, tips and welding rod or wire as required, • Regulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals, • Check and straighten gasket surfaces and grind excess weld from finished work, • Lay out and secure work which may involve heavy parts and assemblies. Regulate current and voltage for proper penetration and fusion of similar and dissimilar metals, • Perform moderate to advanced Mig/Tig Welding in various positions as required, • Perform preventive maintenance procedures as needed, • Provide personal tools as required, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of welding tasks as needed, • Inspect all work and insure it meets requirements prior to passing it on to the next operation, • Document actions by completing production and quality forms, • Train others on proper welding procedures and techniques. We are looking for someone who: • Holds a High School diploma, GED or equivalent work experience, • Has at least one year of formal welding training or the equivalent level of experience, • Has 3 years of welding experience in a manufacturing environment, • Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipment, • Must be able to read and interpret Drawings and Bills of Material, • Must have basic computer skills, • Must be able to perform Mig and Tig welding in various positions The physical demands of the job are: • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent, • Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists, • Must remain medical cleared to wear PAPR or SAR welding respirator helmet What we offer you: Pay Range is typically between $27 - $30 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation, • Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job DescriptionRate of Pay: $25.00 to $30.00 per hour (paid weekly).Overtime Rate: $37.50 to $45.00 per hour. 1st Shift Schedule: • Monday thru Friday; 7:00am to 3:30pm., • Overtime always available; paid breaks. JOB SUMMARY: MAAC is looking for a strong fabricator/welder with supervisory experience who, after an introductory training period of hands-on production work, would transition into a lead role. The Lead Fabricator is a full-time teammate who can lead and assist team members to meet production goals with a focus on quality and safety, along with training and mentoring co-workers to become better fabricators and welders. The primary tasks to oversee consist of building machine frames and components out of structural steel and tearing down completed machines in preparation for painting and shipping. This leader must have the ability to delegate tasks among crews and follow up on assignments to assure quality standards and production timelines are met. • Fabrication/welding and continual learning of machine designs and components., • Lead and coordinate fabrication, welding, and component assembly tasks., • Monitor teammate performance and offer teaching moments., • Assure quality of manufactured and assembled items., • Remain on target with operational schedules and company objectives., • Communicate with peers to maximize workflow efficiencies., • Maintain a safe working environment free of hazards and equipment concerns., • Assure teammates are motivated and engaged in their work efforts. BENEFITS: • Training and teaching provided to learn a new trade., • Heavy promoting from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing available upon reaching qualified service time., • Reimbursement for qualified technical training., • Easily accessible and modern facility., • Clean environment with well-maintained equipment., • Stability of industry-leading company in business 40 years., • Equal opportunity employer; trade school graduates and veterans encouraged. DESIRED SKILLS: • Minimum of 4 years of fabrication experience with various metals., • Basic understanding of Microsoft Outlook and Word., • Can communicate, problem-solve and have strong attention to detail., • Ability to prepare work plans and fabrication layouts., • Ability to read and interpret engineering blueprints., • Proficient in welding and fabrication skills., • Working knowledge of saw, shear, drill press, forklift and overhead crane are all a plus., • Bilingual applicants encouraged (English + Spanish). CLOSING:Thank you for your interest in joining our team. If you would like to apply or find out more about this position and our company, please contact us at jobs@maacmachinery.com or call 630-665-1700.

Job Description Fabrication of dump truck bodies repairs to dump truck bodies,and other truck repairs,handrail measuring and fab,staircase fab,hitch fabrication general repairs to anything and everything,one off prototypes.MUST know how to read a tape measure correctly the first time,MUST know how to tell time and be on time every day Company DescriptionBeen in business since 1997 busy western Chicago suburb shop with national accounts and many local town's and village's served busy all year roundBeen in business since 1997 busy western Chicago suburb shop with national accounts and many local town's and village's served busy all year round

Welder II As a Welder II you will: • Assemble, align, square up, fit, stiffen and tack weld a variety of subassemblies and assemblies of moderate to advanced complexity using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment, • Fit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assembly, • Set up and regulate pressure for oxyacetylene torch, • Select electrode size and type, tips and welding rod or wire as required, • Regulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals, • Check and straighten gasket surfaces and grind excess weld from finished work, • Lay out and secure work which may involve heavy parts and assemblies. Regulate current and voltage for proper penetration and fusion of similar and dissimilar metals, • Perform moderate to advanced Mig/Tig Welding in various positions as required, • Perform preventive maintenance procedures as needed, • Provide personal tools as required, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of welding tasks as needed, • Inspect all work and insure it meets requirements prior to passing it on to the next operation, • Document actions by completing production and quality forms, • Train others on proper welding procedures and techniques. We are looking for someone who: • Holds a High School diploma, GED or equivalent work experience, • Has at least one year of formal welding training or the equivalent level of experience, • Has 3 years of welding experience in a manufacturing environment, • Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipment, • Must be able to read and interpret Drawings and Bills of Material, • Must have basic computer skills, • Must be able to perform Mig and Tig welding in various positions The physical demands of the job are: • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent, • Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists, • Must remain medical cleared to wear PAPR or SAR welding respirator helmet What we offer you: Pay Range is typically between $27 - $30 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation, • Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Come fly with Regal Rexnord and watch your career soar! Join the winning team with a company that offers excellent opportunities to grow your career. Based on experience we will offer $24.00-$30.00/Hr., along with a very competitive benefit package, including 401(k) with a match, that starts day one. We are located in a state of the art, climate-controlled building. Regal Rexnord's Aerospace and Defense business is on an upward trajectory, we are rapidly growing, and we have opportunities to add new team members. Are you interested in joining a growing team with a fantastic culture that is offering a $4,000 sign-on bonus. Win! • Work from process sheets, blueprints, setup sheets, setup cards, machine status boards, and verbal as well as written instructions., • Machine and install or re-cut chuck jaws as required., • Insert and secure tooling in machine turrets and preform machine set ups., • Download and upload programs into machine and make minor programming adjustments as needed., • Operate different types of computerized numerical controls to manufacture a finished machined product by performing a wide range of machining operations within tight tolerances., • Inspect own work for correct dimensions and ensure that company quality and quantity standards are maintained and complete required documentation. Will be required to inspect the work of other machinists., • May be required to operate multiple machines and rotating departments., • Enters data into ERP system., • Load and unload component piece parts with weights up to 25 lbs, • Other duties as assigned. Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a 'U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position. Previous experience and demonstrated proficiency in operating CNC lathe, CNC mill machines, or resistance spot welder (any combination of two machines), with intermediate knowledge and experience with setting up machines. Requires a high school education or equivalent experience. Must be reliable with minimal call-offs during the year, we value and expect good attendance Minimum of 2 years of related experience, and knowledge of machining principles and methods for computer numerical controlled machine tools required Demonstrated ability to perform basic mathematical calculations. Must be able to read and interpret work instructions and blueprints in English. External candidates will be required to pass a Machinist test which measures mechanical aptitude. Compensation Based on Experience / Skills: $24.00 to $30.00/hr. Matching 401(k) contribution Medical/Dental/Vision Insurance Short-Term and Long-Term Disability Insurance Accidental Death and Dismemberment Insurance Flexible Spending Accounts (Medical and Dependent Care) & Health Savings Accounts Critical illness and Accident Insurance, as well as Life Insurance, and an EAP Educational Reimbursement External Associates please apply at www.regalrexnord.com and upload current resume. Internal Associates must sign into career site www.regalrexnord.com, click Workday Login, enter Username / Password you created then apply and upload a current resume. Regal Rexnord associates must be in good standing for consideration for job openings. This includes satisfactory or above ratings in job performance and no corrective actions, PIP's, disciplinary issues or warnings in the last 12 months. Equal Employment Opportunity Employer: Female/Sexual Orientation/Gender Identity/Minority/Veteran/Disabled

Job Description Maintenance Technician Naperville, IL How can you make a difference at your job and can have the opportunity to grow? Join the Naperville – Spartech Team! We are currently looking for a Maintenance Technician to join our team. If you meet the qualifications and want to make a difference in a fast-paced environment with a company large enough to offer you room to grow but not so large you become "just a number", and who has a large focus on safety and success, Spartech might be the ideal company for you! The Maintenance Technician is responsible for completing maintenance assignments to build, repair and/or maintain all equipment in good operating condition as quickly and accurately as possible, while keeping associated costs to a minimum to help meet Plant goals. The Maintenance Technician is expected to be multi-skilled and able to contribute to plant maintenance activities in a variety of craft disciplines. Requirements • Completes projects with minimal guidance showing a proactive attitude to minimizing equipment down time and lost production capability., • Troubleshoots mechanical devices in operation. Dismantles and examines devices to gain access to and remove defective parts. Adjusts, repairs or replaces defective parts., • Sets up and operates shop machinery such as lathe, drill press, grinders, band saws, cutting torch, welder. etc. Uses hand tools and pneumatic tools to modify or repair parts and equipment., • Installs new or repairs/modifies hydraulic and pneumatic equipment as needed., • Improves reliability and uptime of all equipment. Takes a proactive approach to equipment issues with a preventive maintenance mentality., • Operates forklift and hydraulic working platform as needed., • Research supplies, parts and tools needed to complete work orders., • Assists in identifying and maintaining an accurate inventory of parts., • Contributes to upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc., • Supports the vision, mission and guiding principles of the company., • Follows applicable Safety, Health and Environmental rules and guidelines while performing job duties., • Maintains departmental housekeeping., • Electrical experience., • Other duties as assigned. Education & Experience • High school diploma or equivalent required., • 5 years of industrial maintenance experience or technical hands-on experience. Benefits We offer competitive salary and benefit programs! Benefits include: • Medical, • 401(k) Plan, • Life and AD&D, • Vacation, • 6 Paid Holidays Spartech LLC headquartered in Maryland Heights; Missouri is a leading manufacturing organization in the Custom Sheet & Roll Stock and Packaging markets with over a dozen locations throughout the United States. We have a broad customer base with extensive product offerings and technologies. Many of our materials are used in products you might see every day - for example, if you start your morning with a single serve yogurt, the container you ate from may be made from one of Spartech's products or the refrigerator where the yogurt was stored could have Spartech products in its interior features. More unique uses of our products can be seen in military or security applications, for example in fighter jet canopies or bullet resistant windows. From routine daily-life to life-saving applications - we make a difference. Our broad scope of products and services keep our environment interesting and challenging with a culture focused on success. Spartech, LLC provides equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, or veteran status, or other legally protected classification in the state in which a person is seeking employment. Spartech will use E-Verify to ensure employment eligibility of newly hired employees where required.

The Senior Fab Welder will be welding chambers and other devices for level and flow measuring equipment used in a variety of industrial applications worldwide. AMETEK LMS is currently seeking a first-shift Senior Fab Welder to join our production team.

PROMAN Staffing - 1552 N Aurora Rd - Responsibilities: Operate machinery including saws, grinders, benders, and cutters; Perform cut pipe and sheet metal fabrication; Complete MIG welding, brazing, and soldering tasks; Read and interpret basic drawings and measurements; Maintain a clean and organize

Aerotek - JobID: JP-005853840 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

ProLogistix - - Responsibilities: Perform high-quality TIG welding on a variety of steel parts and assemblies according to specifications.Interpret and follow blueprints, weld symbols, and technical drawings to plan weld sequences and joint designs.Set up, adjust, and maintain TIG welding equipment

Verstela - - Responsibilities: Perform welding operations according to specifications and blueprints; Set up and operate welding equipment safely and efficiently; Inspect welds to ensure quality standards; Assist with fabrication and assembly of products; Maintain a clean and safe work area.

Greif Packaging - - Responsibilities: Operates routine production machinery in accordance with prints and specifications provided; Measures finished parts with precision tools to ensure compliance with specifications; Maintains logs and records of units produced; Inspects equipment prior to use to

Stand Up Forklift Operator - 2nd shift (816).Montgomery - Montgomery, IL 60538.Carl Buddig and Company, a respected name in the meat manufacturing industry, boasts a legacy of over 80 years.Founded as a family-owned company, we have evolved into a leading producer of premium meat products, including

Snelling - - Responsibilities: Picking and packing accurately; Load and unload product; Reach truck experience; General warehouse labor support.

Midway Staffing - - Responsibilities: Hang, count, and inspect garments for quality; Load and unload laundry equipment; Fold, transport, and pack cleaning towels, bath towels, and napkins for inventory storage; Prepare packages for customer delivery; Work in assigned production areas as scheduled a

Verstela - - Responsibilities: Operate the roll wrapping machine to help ensure quality production; Observe machine operation and notify the lead or operator of any production issues; Place glued roll headers on each side of finished rolls; Initialize and prepare headers for production; Keep the ma

Elite Staffing - 525 Crossroads Parkway - Responsibilities: Packaging food; Perform warehouse tasks related to food production; Follow posted work instructions; Ensure quality and safety standards.

Greif Packaging - - Responsibilities: Operates routine production machinery in accordance with prints and specifications; Measures finished parts with precision tools to ensure specifications; Maintains logs and records of units produced; Inspects equipment prior to use and performs basic adjustmen

PROMAN Staffing - - Responsibilities: Operate machinery on the assembly line; Assist in fabrication using hand and power tools; Maintain a clean workspace in safety standards; Perform quality checks on finished products; Move materials throughout warehouse and facility.

Advance Services Inc - - Responsibilities: Feed materials into machinery and oversee production flow; Inspect finished goods for quality; Prepare products for shipment; Maintain a clean and organized work area.

Elite Staffing - 525 Crossroads Parkway - Responsibilities: Package food items; Operate packaging equipment; Maintain clean and organized work area; Follow safety and quality protocols; Meet shift schedule.

Crate & Barrel - - Responsibilities: Troubleshoot and repair electrical and mechanical problems related to all material handling equipment and the facility building; Operates all types of material handling tools in order to perform maintenance and repair; Oversees outside service providers for nece

Covenant Living Communities - - Responsibilities: Complete assigned work requests and preventative maintenance work orders; Inspect facilities, systems and components for safety and cleanliness and identify repairs; Use a variety of hand tools and small power tools and other power tools; Troublesho

Crate & Barrel - - Responsibilities: Troubleshoot and repair electrical and mechanical problems related to all material handling equipment and the facility building, including automated conveyor systems; Troubleshoot and resolve systematic, physical, and robotic issues; Troubleshoot and repair thre

Aerotek - JobID: JP-005851384 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Our products are used in a wide variety of industries including medical, GPS, process control, transportation, homeland security, broadcast and pro audio.We currently have an opening for assemblers at our Villa Park facility.An Assembler C performs repetitive assembly operations under detailed instr

G&W Electric - - Responsibilities: Prepare and study assembly instructions and blueprints; Assemble components and subassemblies by correct fit; Assist in building prototypes; Maintain safe and clean working environment; Inspect work and document production.

Aerotek - - Responsibilities: Assemble and test wireless reader devices and docking stations to ensure proper functionality and reliability; Test analog and digital circuit boards using appropriate test equipment; Soldering, including surface mount components; Follow blueprints, work instructions,

G&W Electric - - Responsibilities: Perform sub-assembly and/or assembly operations of basic complexity; Prepare work by studying assembly instructions, blueprint specifications, and parts lists; Position parts and subassemblies by using templates or reading measurements; Assemble components by exam

What Timken makes possible begins with you.Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives.Now you can join the Timken team to write your own unique story and help drive what's next.A career at Timken means you ca

What Timken makes possible begins with you.Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives.Now you can join the Timken team to write your own unique story and help drive what's next.A career at Timken means you ca

PROMAN Staffing - - Responsibilities: Assist with assembly of electronic products containing microchips; Attach rubber molding components to electronics; Perform repetitive tasks while sitting or standing; Maintain a clean and organized work area; Follow safety, quality, and work instructions.

One Hour Heating & Air Conditioning - - Responsibilities: Perform complete HVAC duct cleaning and sanitizing services; Conduct Club Membership maintenance visits and maintenance calls; Replace basic HVAC components or parts as needed; Document all service details accurately; Provide excellent custo

G&W Electric - - Responsibilities: Prepare work by studying assembly instructions, blueprint specifications, and parts lists; Assemble components by examining connections for correct fit; fastening parts and subassemblies; Assist in the building of prototypes and/or other basic assembly projects; M

Aerotek - - Responsibilities: Perform fine hand assembly operations with precision, completing multiple tasks at low volumes while maintaining high quality standards.Follow detailed written and verbal assembly instructions accurately to ensure products meet defined specifications and control plans.

G&W Electric - - Responsibilities: Prepare work by studying assembly instructions, blueprint specifications, and parts lists; Assemble components by examining connections for correct fit; fastening parts and subassemblies; Assist in the building of prototypes and/or other basic assembly projects ou