Trabajos welder en Denver, ColoradoCrear alertas

Job DescriptionPrimary Purpose:To manage pipeline integrity projects, O&M projects, and small capital projects. Provide technical support in all areas of pipeline systems and to be a technical resource to the company in support of projects and compliance with regulations and company standards. Essential duties and responsibilities: • Efficiently oversee the planning, scheduling, management, and reporting of multiple capital and maintenance projects across various deadlines and levels of responsibility. Such projects include new pipeline construction, pipeline replacement, inline inspection, pipeline integrity remediation, pressure testing, compression, automation and controls, measurement, corrosion, gas processing, pipeline interconnects, encroachments etc., • Develop project scope documents while tracking, managing, and reporting any increases and decreases to project scope., • Manage several contractors and consultants simultaneously such as inspectors, engineering consultants, surveyors, material suppliers, general contractors, Non-Destructive Examination (NDE) contractors, line stopping and hot tapping contractors, cross compression contractors, In-Line Inspection (ILI) consultants, etc., • Engineer pipeline and facility designs for small projects such as pipeline replacements, pipeline re-routes, pig traps, and minor station piping modifications., • Oversight and engineering of pipeline defect assessments and repairs., • Develop project schedules, cost estimates and budget forecasts as required with minimal direction from supervisor., • Develop Request for Proposal (RFP) bid documents for construction projects and materials, etc., conduct bid process, prepare detailed bid analysis, select successful contractor., • Provide technical expertise to various internal and external customers and provide engineering and project management support to field operations as necessary., • Provide technical guidance on the application of industry codes and standards as well as federal regulations governing hazardous pipeline design and construction., • Develop and/or update Company engineering, material and equipment specifications and standards., • Manage projects per Company and OSHA safety standards and Company engineering, construction and operating/maintenance standards and procedures., • Collect, review, organize and publish project and compliance related documentation into project job books that will be audited by regulatory agencies and retained for the life of the asset., • Participate in design reviews for large capital projects as required., • Participate in industry research groups as required., • Collaborate with a wide variety of people with tact, courtesy, and professionalism., • Communicate clearly and effectively, both in person and over the phone, demonstrating strong verbal skills and active listening., • Regular, dependable work attendance and a fully competent level of performance is expected., • Will work non-traditional hours as needed., • Maintain a high regard for personal safety, for the safety of company assets and employees, and the general public., • Other daily, weekly, monthly, or special project duties as identified and defined., • Other duties as assigned. Minimum requirements:Education: • Bachelor’s degree from an accredited institution in Engineering. Experience/Specific Knowledge: • A minimum of 2-6 years experience in engineering., • Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience and skill sets of the successful candidate., • Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, Visio, and Outlook. Certifications, Licenses & Registrations: • Must possess and maintain a valid driver’s license and a driving record satisfactory to the company and its insurers (for travel). Competencies, Skills & Abilities: • Knowledge of the natural gas and oil transmission industry, pipeline/facilities design, construction, operation and testing., • Proficiency in basic engineering skills., • Proficiency in basic project management skills., • Familiarity and ability to read and interpret electrical and mechanical blueprints and diagrams, including flow charts, cause/effect diagrams, and Piping and Instrument Drawings (P&IDs)., • Familiarity with pipeline and facility design calculations and equations., • Familiarity and ability to read and interpret basic GIS information and maps., • Knowledge of ROW, EHS and regulatory clearances for pipeline projects., • Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules., • Ability to organize and prioritize work to successfully perform work on simultaneous projects and tasks to meet deadlines., • Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience and skill sets of the successful candidate. Physical Demands:All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Minimal safety hazards; general office working conditions., • Must be able to sit for prolonged periods of time., • The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and listen. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 25 pounds., • Ability to work in varying, sometimes extreme, weather conditions as needed during field work., • Field activities may include walking to and amidst work and/or construction sites, climbing in and out of trenches, working around heavy equipment and working in confined spaces. Working Conditions: • Frequent overnight travel may be required., • Overtime and/or extended work hours may be required depending on the project., • Required to carry a cell phone and be available to respond during working and non-working hours., • The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed. Supervisory Responsibility: • None PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS, & ABILITIES: Over and above the minimum requirements; these are not required but advantageous for this position: • Specific experience in project management, engineering, design and construction of pipeline, compressor, and meter station facilities., • Knowledge of pipeline operation., • Knowledge and experience with pipeline and facility pressure testing., • Knowledge and experience with stress engineering calculations., • Knowledge and experience with Over Pressure Protection (OPP) sizing and review., • Knowledge and experience with welding procedures application, welder and procedure qualification., • Familiarity with weld inspection, visual and NDE such as RT, MT, UT, and PT., • Experience and knowledge of pipeline integrity, ILI tool runs and pipeline defect assessment and repair., • Familiarity with Remaining Strength (RSTRENG) calculations and programs., • Experience in investigation and root-cause determination of pipeline and equipment failures., • Advanced proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, and Outlook., • Knowledge and/or application experience with industry standards (DOT 49CFR192 and 195, API, ASME B31.8, B31.8S, B31.4, B31.3, Section VIII, Section IX, all the B16’s, ANSI, NACE, NEC, MSS-SP-44, SP-75, SP-97, etc.)., • Registered engineering intern (EI), • Registered professional engineer (PE) Compensation:The salary range for this role is $85,500-$128,550/year About UsTallgrass was named one of the Top Workplaces USA and highlighted in Colorado's Top Workplaces for the past seven consecutive years. Tallgrass is a leading energy infrastructure company focused on safely, reliably, and sustainably delivering the energy and services that power our nation and enable our quality of life. At Tallgrass, we value our teams and strive to create an environment where employees feel respected, and their contributions are valued. We aim to support employees' physical, mental, and financial well-being through a comprehensive Total Rewards Program. • Industry competitive pay., • Health insurance package options that include Flexible Spending & Health Savings Accounts., • Infertility Coverage., • Parental Leave., • 401(k) with up to a 6% match that vests immediately plus an employer discretionary contribution of up to 4%., • Wellness Programs and Mental Health Resources., • Employer-paid life insurance, short-term disability, and long-term disability coverage., • Critical Illness & Accident Insurance., • Vacation, sick days, paid caregiver leave, volunteer and bereavement paid time off., • Identity theft protection., • Annual discretionary bonus., • Generous Tuition Reimbursement Program., • Company-paid holidays and floating holidays., • Company vehicle (if applicable)., • Employee discounts; vehicles, tires, cellular plans, and more., • Networking and employee engagement events., • Personal development to grow your career with us based on your strengths and interests. Application Deadline: Recruiting timelines vary by position; however, all Tallgrass positions accept applications for at least five business days from the posting date. This position is open and still accepting applications. Compensation: Compensation ranges are provided in good faith based on what we anticipate when researching wages for this position at the state and national levels. We may ultimately pay more or less than the posted range. This salary range may also be modified in the future. Notice to External Search Firms: Tallgrass does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Tallgrass property; therefore, Tallgrass will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Approved vendors may be invited to refer talent for specific positions at Tallgrass's request only. A fully executed agreement with Tallgrass must be in place and current in these cases. EEO Statement: Tallgrass complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Tallgrass does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status, or other status protected by law.

Job Description Job Description: Auto Body Collision Repair Technician The Body Technician is a skilled craftsman with a thorough understanding of how to restore automobiles with light to heavy damage through collision repair. Key responsibilities include assessing exterior damage, repairing manufacturer guidelines, ensuring necessary parts, reshaping panels with minor damage, welding and refinishing techniques as needed. FLSA Status: Non-Exempt Work Location: Full Time Hourly/Commission Job Responsibilities: • Ensure repairs adhere to OE standards, DRP part choices, and ADAS requirements for calibrations and scanning, verifying a quality and safe repair., • Complete disassembly of vehicles, • Refit new parts such as bumpers, fenders, grills, moldings, and other bolt-on and welded items., • Complete all repairs in a manner in which the repaired areas are restored to the original manufacturer’s specifications, including door, hood and deck alignments, chassis, and frame measurements, and welded on unibody parts., • Check all parts for accuracy before starting the repair and notify the Estimator of any incorrect parts or other discrepancies., • Work efficiently to meet the target delivery date assigned to an RO., • Assume responsibility for all parts assigned to your job(s), • Protect the interior and exterior non-repair areas of all vehicles in repair from additional damage, including dust, dirt, scratches, primer, overspray., • Read and understand every line item of each vehicle’s RO as pertaining to your responsibilities and visually inspect every vehicle to ensure that all the repairs are complete., • Provide guidance, education, and assistance to the assigned apprentice in such a manner that furthers their developmental growth. Key Performance Metrics • Customer Service Index Score 95+ for Quality, Done on Time, and Net Promoter Score, • Cycle Time Efficiency Skills/Technical Qualifications: • I-CAR Gold Class and ASE certifications a plus, • Complete understanding of all facets of light to heavy automobile collision repair., • Knowledgeable in safety guidelines for repair., • Skilled welder with the ability to remove and refit welded panels as well as the bolt-on items required in a typical crash repair., • The ability to read, understand, and perform written instructions accurately and consistently and to work independently as well as with others in an organized manner. Behavioral Excellence Required: • Perform all assigned responsibilities according to the Company Standard Operating Procedures., • Maintain a clean, organized work area always, adhering to 5S organization., • Participate in training programs as required to maintain the technical and professional skills and techniques necessary for this position., • Extend normal working hours as necessary to accommodate workload and customer requirements. Physical Requirements: • Ability to work in an automotive repair shop environment for extended periods., • Ability to stand, walk, bend, stoop, kneel, crouch, crawl, and reach frequently throughout the workday., • Ability to work in various positions, including above shoulder height, below waist level, and in confined spaces., • Ability to lift, carry, push, and pull up to 50 pounds frequently and up to 75 pounds occasionally, with heavier lifting performed using assistance or mechanical equipment., • Ability to operate hand tools, power tools, welding equipment, measuring devices, and other repair-related equipment safely and effectively., • Ability to use hands and fingers for repetitive grasping, handling, manipulating, and operating tools and equipment., • Ability to visually inspect vehicle damage, measure tolerances, assess repair quality, and identify defects, including close, distance, color, and peripheral vision., • Ability to safely enter, exit, and maneuver around vehicles and equipment in various stages of repair., • Ability to work around moving vehicles, machinery, tools, sharp objects, and other shop-related hazards., • Ability to tolerate exposure to noise, dust, fumes, chemicals, paint products, and varying temperatures while using required personal protective equipment (PPE)., • Ability to communicate effectively with supervisors, coworkers, and other team members regarding repair status, safety concerns, and production needs., • Ability to maintain productivity and quality standards in a fast-paced work environment. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.

Job Description THE COMPANY: Schnabel is a nationally recognized specialty contractor with over 65 years of experience in geostructural design-build and underground construction. With a portfolio of thousands of successful projects across the country, we are known for delivering smart, safe, and cost-effective solutions to complex engineering challenges. We specialize in advanced earth retention systems and other innovative geostructural techniques that create stable, lasting foundations for buildings, infrastructure, and other critical structures. At Schnabel, we combine technical expertise with a hands-on approach to ensure every project starts on solid ground. ROLE: Schnabel is seeking a structural welder with pile driving experience to assist with the building of specialty underground structures. Your main responsibility will be cutting and welding structural steel on our projects. This would be for installation of piles, walers, handrails, and other applications. Our typical scope of work includes installation of piles, lagging, walers, tiebacks, and braces for support of excavation projects. We also take on challenging projects with underpinning, grouting, tunneling, and unique structural support as part of our scope. Candidates who have direct construction experience and familiarity with our company’s traditional scope of work are preferred. RESPONSOBILITIES: • Must be proficient in the use of hand and power tools., • Unload and assemble pile driving hammer and leads., • Unload various types of piling- concrete, pipe, H-piling, timber, and steel sheet piling., • Fuel, lubricate, and maintain the pile driving hammer., • Use oxygen/acetylene welding torch to cut steel plates, pipes, beams, etc., • Proficient with FCAW and SMAW processes, specifically 7018 rods., • Accurately position and drive piles to the required depth and alignment, to ensure structural integrity., • Inspect work to ensure welds are sound, structurally robust, and meet safety standards., • Exposure to outdoor weather conditions, noise, and dust. REQUIREMENTS: • Minimum of 2 years of documented experience in a structural welding role., • Ability to read and interpret plans and schematics., • Structural Welding Certificate such as D1.1 / D1.5 or equivalent (not required but preferred)., • Focus, stand, walk, kneel, climb, bend, and work from heights or within confined space during assigned shift., • Ability to pass pre-employment drug test., • Local and regional travel as required for projects., • Ability to lift and carry 50 pounds of materials over rough terrain., • High school diploma or equivalent., • Driver’s license, reliable transportation, and a safe driving record., • Follow all safety procedures, use proper protective equipment, and help maintain a safe job site by identifying and reporting potential hazards. SAFETY: Support the company’s safety and risk management objectives by adhering to established procedures, proactively identifying and addressing potential risks, and contributing to the achievement of safety goals through the use of metrics and continuous improvement efforts. Don’t hurt yourself, don’t hurt anyone else, and don’t let anyone hurt you; a simple philosophy that has been adopted at Schnabel. We live by this belief to provide a safe and healthy workplace for all our employees and subcontractors. COMPENSATION AND BENEFITS: Pay will be based on local union wage scales. Schnabel is a union contractor and as such, your benefits are made available based on your union affiliation. Through hard work and reliability there will be opportunities to advance within the company. Schnabel is an Equal Opportunity Employer and is fully committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, pregnancy, sexual orientation, national origin, age, disability, genetic information, veteran or military status, or any other characteristics protected by applicable laws. We are an E-Verify employer.

Job Description Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 450,000 square feet of manufacturing capacity across 12 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. With over 50 years of industry experience, Fathom is at the forefront of the Industry 4.0 digital manufacturing revolution serving clients in the technology, defense, aerospace, medical, automotive and IOT sectors. Fathom’s extensive certifications include ISO 9001:2015, ISO 9001:2015 Design, ISO 13485:2016, AS9100:2016, NIST 800-171 and ITAR. Position Summary: This is an opportunity for the right person to join a dynamic team focusing on quality and performance to exceed our customers’ expectations. Some of the duties of a Welder are to operate equipment (e.g. calipers, rulers, ) to put together metal parts or structures. Current open positions include TIG welders. Responsibilities: • Analyzing blueprints and designs, • Following all safety and healthy procedures to avoid accidents and hazards, • Operating angle grinders and other tools, • lining up specific metal components using calipers, rulers and clamps, • Produce quality in a efficient manner Qualifications/Experience: • Technical knowledge of equipment, • Must have 3 years of TIG welding experience on thin gauge steel, • Must have experience in sheet metal and the welding process, • Ability to read and interpret complex drawings, as well as weld symbols, • Ability to read calipers to verify part quality, • Own tools preferred, • High school diploma or G.E.D. required., • This is a second shift job opening What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description REPORTS TO: Lead Welder FLSA STATUS: Non-exempt SUMMARY: Welder Assistant supports welders by preparing materials, maintaining equipment, handling tools, and assisting with workpiece positioning and shop tasks. This role helps ensure the welding team works efficiently, safely, and with high-quality output. ESSENTIAL DUTIES AND RESPONSIBILITIES: Assist welders with setup, material preparation, and workpiece alignment. Move, lift, and hold parts in place for welding or fitting operations. Clean and prepare metal surfaces using grinders, wire wheels, and other tools. Perform basic cutting, deburring, and material handling tasks. Keep tools, welding equipment, and work areas clean and organized. Retrieve materials, consumables, and tools needed for ongoing jobs. Assist in fitting components before welding. Help maintain a safe working environment. Support general shop tasks such as sweeping, organizing, and staging materials for upcoming jobs. Perform other duties as assigned by welders or supervisors EDUCATION and/or EXPERIENCE: HS Diploma, GED or equivalent. Prior shop / fabrication experience preferred SKILLS and ABILITIES: Basic knowledge of hand tools, grinders, and shop equipment. Basic mechanical aptitude. Ability to follow instructions and work safely around welding operations. Comfortable lifting up to 50 lbs. and working on feet for long periods of time. Willingness to learn welding and fitting skills. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to stand and use hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. CERTIFICATES, LICENSES, REGISTRATIONS, OTHER: MUST BE A US CITIZEN - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. ATG is unable to sponsor or take over sponsorship of an employment Visa at this time. Why join us? We take care of our people with: Competitive salary 120 hours of PTO and 8 paid holidays Health, dental, and vision insurance Life and disability coverage HSA/FSA options 401k match Wellness programs Learning, growth, and development programs We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description REPORTS TO: Quality Control Supervisor FLSA STATUS: Non-Exempt SUMMARY: We are seeking a skilled Welding Inspector with a strong background in stainless steel fabrication and welding inspection in regulated industries. The successful candidate will be responsible for ensuring welded components meet applicable codes, customer specifications, and internal standards through rigorous inspection, documentation, and collaboration with our fabrication and engineering teams. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct in-process and final visual weld inspections on glovebox assemblies and subcomponents. Verify compliance with welding procedures, engineering drawings, and applicable codes (AWS D1.6, ASME Section IX, NQA-1, B31.3 etc.). Review and maintain documentation such as WPS, PQRs, and Welder Qualifications. Work closely with welders and QA to provide feedback and ensure continuous compliance. Participate in weld audits and root cause investigations for weld-related non-conformances. Coordinate or perform NDT inspections if certified (VT required; MT, PT, or UT preferred). Ensure traceability and documentation for all welds in accordance with DOE/DOD quality requirements. Support the Quality Department in CMTR and final inspection package compilation. Interface with customer representatives and third-party inspectors during source inspections. NO SUPERVISORY RESPONSIBILITIES: This position has no direct supervisory responsibilities; however, direction may be provided to project coordinators, QA and engineering personnel, and to shop personnel. Direction is provided in the spirit of organizing and prioritizing the tasks required to complete projects on time and within budget. EDUCATION and/or EXPERIENCE: High school diploma or GED required; technical certificate or associate degree preferred. Certified Welding Inspector (CWI) through AWS preferred. Minimum 3–5 years of experience in welding inspection, preferably with stainless steel and precision fabrications. Proficient in reading engineering drawings, weld symbols, tolerances, specifications, and inspection documentation. Strong attention to detail, communication skills, and documentation practices. Familiarity with glovebox fabrication or high-integrity containment systems is a plus, (DOE, DOD, or similarly regulated industries highly preferred). SKILLS and ABILITIES: Technical Skills Proficient in weld inspection techniques including visual inspection, dimensional checks, NDE/NDT methods (VT, PT, MT, UT, RT) Knowledge of welding processes (GTAW, GMAW, FCAW, etc.) and materials (metals, alloys, filler materials). Ability to evaluate procedures; WPS, PQR, and welder qualification records. Must be proficient in identifying discontinuities (cracks, porosity, undercut, lack of fusion). Ability to utilize hand-held measurement tools including micrometers, calipers, gauges, hardness testers. Stays current with welding technologies and code updates. Analytical Abilities Strong attention to detail and ability to spot inconsistencies or non-conformities. Capable of assessing compliance with standards and supporting corrective actions. Interpersonal & Professional Skills Communicates inspection findings clearly through reports and feedback while collaborating effectively with welders, QA/QC, engineering, and production teams. Maintains objectivity and sound judgment under pressure. Ability to interpret technical documents quickly and accurately. Ability to train and mentor junior inspectors or welders on quality requirements. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to stand and use hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. CERTIFICATES, LICENSES, REGISTRATIONS, OTHER: Certified Weld Inspector certification or Level II VT certification required. MUST BE A US CITIZEN - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. ATG is unable to sponsor or take over sponsorship of an employment Visa at this time. Why join us? We take care of our people with: Competitive salary 120 hours of PTO and 8 paid holidays Health, dental, and vision insurance Life and disability coverage HSA/FSA options 401k match Wellness programs Learning, growth, and development programs We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionDescription: Forge your Path to Success and join our team! Buffalo Mountain Metals is looking for an Metal Fabricator I Silverthorne location. About Buffalo Mountain Metals We are an extension of Turner Morris Commercial Roofing, and a trusted provider of sheet metal fabrication and welding services in Colorado since 2006. Serving communities like Silverthorne, Frisco, Breckenridge, Vail, Avon, and Winter Park. We emphasize quality craftsmanship and personalized service, offering custom metal fabrication and intricate welding solutions. Position Details • We are seeking a Metal Fabricator I with beginners to intermediate experience as a fabricator/welder or similar roles., • Mechanical knowledge, with solid ability to read and interpret blueprints, technical drawings to welding specifications., • Knowledge and hands on experience with welding techniques., • Perform basic mathematical calculations for layout and fabrication purposes., • Operates lifting equipment, such as forklift, • Identify problems, evaluate options, and implement effective solutions, • Ability to safely operate tools like grinders, drills, bandsaws, squares and forklifts., • Among other responsibilities. Physical Demands and Work Environment While performing the duties of this job, the employee will be required to use hands to complete detailed work, stand and walk throughout the workday on a regular basis, lifting and/or moving up to 75 lbs., kneel, squat, twist, and reach above shoulder throughout the work day. Schedule Full time 8-10 hours shift Monday to Friday Overtime may be required. Benefits Join our Buffalo Mountain Metals team for an exciting, supportive environment and fantastic pay and benefits, including: • Weekly payroll, • Ongoing recognition programs, • Paid time off such as vacation, sick and holidays, • Medical, dental, vision insurance, • Health Saving Account with company contributions, • 401 K plan with generous company match, • Company sponsored life insurance Position will remain open until filled. Buffalo Mountain Metals is an Equal Opportunity Employer and participates in E-Verify operated by the U.S. Citizenship and Immigration Services. Following conditional job offer, physical and drug test will be reviewed. Requirements: • Experience and/or knowledge of fabricator/welder or similar roles,, • Ability to read and interpret blueprints, technical drawings to welding specifications., • Knowledge of various welding techniques., • A valid driver’s license, maintaining a good driving record, and reliable transportation, is preferred., • Effective and professional communication skills.

Job DescriptionDescription:Forge your Path to Success and join our team! Buffalo Mountain Metals is looking for an Experienced Metal Fabricator II Silverthorne location. About Buffalo Mountain Metals We are an extension of Turner Morris Commercial Roofing, and a trusted provider of sheet metal fabrication and welding services in Colorado since 2006. Serving communities like Silverthorne, Frisco, Breckenridge, Vail, Avon, and Winter Park. We emphasize quality craftsmanship and personalized service, offering custom metal fabrication and intricate welding solutions. Position Details • We are seeking an Experienced Metal Fabricator II with two (2) to five (5) years’ experience in metal fabrication or a similar role., • Accurately ready and interpret blueprints, technical drawings, and instructions to correctly cut, fit, and assemble objects., • Set up and operate a variety of machines and hand tools to cut, bend, shape and finish metal parts., • Proficient use of welding equipment to join metal parts together, including MIG, TIG and ACR welding techniques., • Ability to drive to jobsites around Summit and Eagle counties when needed., • Ensure the fabrication and welding quality meets or exceeds welding code and the company’s standards., • Ability to safely operate tools like grinders, drills, bandsaws, squares and forklift., • Among other responsibilities. Physical Demands and Work Environment While performing the duties of this job, the employee will be required to use hands to complete detailed work, stand and walk throughout the workday on a regular basis, lifting and/or moving up to 75 lbs., kneel, squat, twist, and reach above shoulder throughout the work day. Schedule Full time 8-10 hours shift Monday to Friday Overtime may be required. Benefits Join our Buffalo Mountain Metals team for an exciting, supportive environment and fantastic pay and benefits, including: • Weekly payroll, • Ongoing recognition programs, • Paid time off such as vacation, sick and holidays, • Medical, dental, vision insurance, • Health Saving Account with company contributions, • 401 K plan with generous company match, • Company sponsored life insurance Position will remain open until filled. Buffalo Mountain Metals is an Equal Opportunity Employer and participates in E-Verify operated by the U.S. Citizenship and Immigration Services. Following conditional job offer, physical and drug test will be reviewed. Requirements: • Proven experience as a fabricator/welder or similar roles, such as certification in AWS, CWB is preferred., • Advanced mechanical knowledge., • Proficient in reading and interpretation of blueprints, technical drawings to welding specifications., • Strong knowledge of various welding techniques., • A valid driver’s license, maintain a good driving record, and reliable transportation., • Effective and professional communication skills

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for DOT inspection certified mechanics with 3 or more years of tank trailer repair experience! Shift Hours: Monday through Friday, 8:00 AM to 5:00 PM This position is for our Denver, CO branch at 4850 E 74th Ave, Commerce City, CO 80022. Pay Range: dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • TIG aluminum, stainless or carbon welding experience (optional), • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Join Crusoe Energy as a skilled Welder and play a crucial role in fabricating and assembling metal components for our innovative projects. You will utilize your expertise in various welding techniques, including MIG and TIG, to ensure high-quality welds that meet strict specifications and blueprints. Your work will directly contribute to the structural integrity and functionality of our equipment. You'll be involved in interpreting blueprints, laying out parts, and performing quality inspections to maintain our high standards. The ideal candidate is a detail-oriented team player with a strong work ethic and a commitment to safety. This is a full-time position. What You’ll Be Working On: Core Welding Operations: MIG and TIG weld steel, aluminum, and stainless steel components according to blueprints and specifications. Blueprint Interpretation: Read and understand blueprints or product specifications prior to starting projects. Fabrication and Assembly: Accurately lay out parts, assemble, and make appropriate welds based on specifications. Quality Assurance: Observe tests on welded surfaces to evaluate weld quality and conformance to specifications, and perform personal or coordinated quality inspections. Safety and Maintenance: Ensure work is done safely, maintain a clean and organized work area, and properly care for all equipment. Team & Departmental Collaboration: Work with team members to maximize productivity and efficiency. Also may require occasional cross-functional work with operating team including machine operation. Physical Tasks: Lift raw materials, final products, and items manually (up to 60 pounds). What You’ll Bring to the Team: Welding Experience: 2 to 10+ years of working experience as a welder. Welding Proficiency: Strong knowledge of all types of welding processes, with skills in Spot, MIG, and TIG welding preferred. Material Knowledge: Familiarity with stainless and mild steel. Fabrication Skills: Capable of working with tube or channel to fabricate trailers. Physical Requirements: Ability to lift, lower, push, and pull all sizes of merchandise up to 50 lbs, and ability to stand, walk, stoop, and bend for 8 hours or more daily. Detail Orientation: Must be detail-oriented. Education: High school diploma or GED. Bonus Points: Any specialized welding certifications. Experience working with exotic metals or advanced alloys. Extensive experience fabricating trailers. Experience working with automated welding equipment. Experience with formal quality inspection processes. Benefits: Competitive compensation Restricted Stock Units Paid time off & paid holidays Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Compensation: Compensation will be paid in the range of $20 - $34 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description REPORTS TO: Lead Welder FLSA STATUS: Non-exempt SUMMARY: Welder II is responsible for reading and interpreting shop drawings and travelers to layout and fabricate complex metal products. They will be familiar with and proficient at welding in accordance with AWS, ASME and Customer specifications on carbon steel, stainless steel and alloy materials using internal shop drawings and/or customer prints. ESSENTIAL DUTIES AND RESPONSIBILITIES: Able to read and understand basic blueprints for layout, fit up and weld. Complete understanding in the use of ATG’s work order/traveler documentation, material heat number tracing, weld maps, and Quality Management System Must be able to certify to ASME Sect. IX and AWS qualifications Able to perform x-ray quality welds on products fabricated from stainless steel, carbon steel and specialty alloys using certified processes, i.e. GTAW, FCAW, LBW etc. Must be able to occasionally work in confined spaces with limited access and heights. NO SUPERVISORY RESPONSIBILITIES: This position has no direct supervisory responsibilities however, direction may be provided to project coordinators, QA and engineering personnel, and to shop personnel. Direction is provided in the spirit of organizing and prioritizing the tasks required to complete projects on time and within budget. EDUCATION and/or EXPERIENCE: HS Diploma, GED or equivalent. Minimum 5 years of related experience or technical training or equivalent SKILLS and ABILITIES: Capable of reading advanced blueprints and weld symbols Understanding of GD&T Ability to produce and use fixturing necessary to complete weldments/assemblies. Capable of completing weldments with consideration of tolerances, shrinkage and warpage. Operate shop machinery (band saw, brake press, shear, drill press, plasma cutter, etc.) Advanced understanding of polishing and ability to meet desired surface finish requirements. Advanced ability to layout hole patterns, penetrations, brake lines etc. Ability to safely operate forklifts and cranes. Ability to operate and/or willingness to learn operation of capacitive discharge weld stud machines. Ability to perform various assembly tasks. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. CERTIFICATES, LICENSES, REGISTRATIONS, OTHER: MUST BE A US CITIZEN - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. ATG is unable to sponsor or take over sponsorship of an employment Visa at this time. Why join us? We take care of our people with: Competitive salary 120 hours of PTO and 8 paid holidays Health, dental, and vision insurance Life and disability coverage HSA/FSA options 401k match Wellness programs Learning, growth, and development programs We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Job Type: Full Time (Overtime when work load requires) Benefits (after 90 day probation period): • Health Insurance, • Paid Holidays, • Paid Time Off (PTO), • PPE Reimbursement Schedule: • 6:00AM – 4:30PM, M-F, plus overtime when available Qualifications: • Pipe Welding Experience: 3+ years (required), • Commercial construction or other field welding: 5+ years (required) License/Certification: • Current or prior ASME certifications on most common welding methods; require prior certification in SMAW welding procedures. Work Location: • Commerce City welding shop and across Denver Metro (occasionally across Front Range) and uncommon out-of-town assignments Responsibilities: • SMAW carbon steel spools and pipe routing based on specifications., • Read and interpret blueprints and/or drawings to determine the specific welding requirements., • Accurately lay out parts, assemble, and make appropriate welds based on specifications., • Contribute to design of solutions., • Responsible for fabrication of solutions in addition to welding., • Ensure work is done safety and meets quality standards., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and polices., • Provide a great level of attention to detail., • Follow all safety rules and quality standards., • Work with team members to maximize productivity and efficiency., • Lift raw materials, final products, and items manually (up to 60 pounds)., • Operate forklift, bandsaw, other machineries, electric and hand tools. Knowledge and Skills for this Position: • At least three years' experience with Smaw pipe welding required., • Ability to read and interpret blueprints and/or drawings., • Knowledge of raw materials, production processes, quality control, and costs to maximize effective manufacture and distribution of goods., • Knowledge of safety standards and willingness to use protective clothing (face shields, gloves, etc.), • High levels of attention to detail., • Ability to perform shop math, convert decimals to fractional equivalents and fractions to decimal equivalents., • Ability to produce quality products consistently., • Ability and willingness to follow verbal and written instructions., • Must be reliable, with a strong work ethic and desire to contribute to a team., • Willing to work 40+ hours weekly. Welding Test Requirements: • All candidates must pass dissimilar metal test - 6010/7018 SMAW 6G pipe test, • Must pass visual & bend test, • Candidates must provide their own PPE, hood, gloves for the initial testCompany DescriptionWe believe that work is a fundamental part of the human existence. That our work not only defines much of who we are as individuals, but also provides us the opportunity to become the best versions of ourselves. In work, we find meaning and purpose; we are challenged to become more than the status quo. This is also why All Workers Matter. Regardless of your position at Commercial Welding, you will be seen as an important member of the team. It also means you will be held to the same high standards as everyone else. If you love to work and come with a positive attitude every day, we encourage you to apply to see if you are a good fit with the Commercial Welding team.We believe that work is a fundamental part of the human existence. That our work not only defines much of who we are as individuals, but also provides us the opportunity to become the best versions of ourselves. In work, we find meaning and purpose; we are challenged to become more than the status quo.\r\n\r\nThis is also why All Workers Matter. Regardless of your position at Commercial Welding, you will be seen as an important member of the team. It also means you will be held to the same high standards as everyone else.\r\n\r\nIf you love to work and come with a positive attitude every day, we encourage you to apply to see if you are a good fit with the Commercial Welding team.

Job Description Overview Company Overview Since 1912, Sturgeon Electric Company, Inc. (Sturgeon Electric) – a subsidiary of MYR Group Inc. – has provided complex, large-scale electrical construction services for our clients throughout the western United States. As a full-service electrical provider, we offer industry leading electrical transmission, commercial and industrial, and renewable energy services. Sturgeon Electric has two divisions, offering both powerline construction and commercial/industrial electrical construction, making it a full-service electrical provider. Summary Sturgeon Electric Manufacturing has an opening for a highly skilled Welder. Your daily responsibilities will include but not limited to reviewing specifications, laying out metal components, cutting, fabricating, and welding those pieces together to create custom fabrications. We expect our welders and fabricators to complete each job within specific deadlines. Our ideal candidate has at least three years of welding experience and a working knowledge of standard welding tools and techniques. Essential Functions • Interpret drawings and plans to understand project scope and specifications., • Produce templates and other work aids, • Provide material take-off and rough drawings when needed, • Utilize industry tools and equipment, including powered saws, hydraulic press brake, shears, portable grinders, fiber laser, plasma cutter, metal lathes, and mills., • Use precision measuring tools to inspect grooves and angles., • Weld parts out of mild steel, galvanized metal, stainless steel, and sheet metal, in flat, vertical, and/or overhead positions., • Maintain proper equipment; repair when needed Responsibilities Qualifications • Hydraulic or CNC Press Brake experience, • Sheet Metal Lasers experience, • CNC Table, • High School diploma or equivalent, • Follow all safety precautions, • 3+ years of professional welding experience preferred, • Sheet metal experience necessary. Steel, Stainless Steel, Aluminum, Galvanized, 11ga. To 18ga. (cutting, forming, welding)., • MIG, TIG, Welder Certification a plus, • Working knowledge of industry tools and equipment, • Able to read blueprints, • Proficient in basic math, • Ability to work in a fast-paced environment, • Excellent communication skills and attention to detail., • Problem solving abilities Qualifications • Salary $41,500-$70,000 / year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Comprehensive benefits package - Medical, Dental, Vision, Teledoc, Hearing, Prescriptions, Mental Health, Employee Assistance Plan (EAP), Short Term Disability, Retiree Coverage, and Life Insurance under LINECo – (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage., • ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases., • Annual Paid Time Off starting at 15 days plus 10 paid Holidays (our Cultural Celebration Day is a floating holiday)., • Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential., • Superior educational assistance program (support for educational costs, internal training, and more!)., • Company-paid short and long-term disability, life, and accidental death & dismemberment., • Company-paid business travel accident insurance., • Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employee and dependents. This position will remain posted for a minimum of three days. The posting will remain active and automatically extend until the vacancy is filled. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Job Description REPORTS TO: Lead Welder FLSA STATUS: Non-exempt SUMMARY: Pipe Welder II is responsible for reading and interpreting shop drawings and travelers to layout and fabricate complex piping systems. They will be familiar with and proficient at welding in accordance with AWS, ASME and Customer specifications on stainless steel and alloy materials using internal shop drawings and/or customer prints. ESSENTIAL DUTIES AND RESPONSIBILITIES: Able to read and understand basic blueprints for layout, fit up and weld. Complete understanding in the use of ATG’s work order/traveler documentation, material heat number tracing, weld maps, and Quality Management System. Must be able to certify to ASME Sect. IX and AWS qualifications Able to perform x-ray quality welds on products fabricated from stainless steel and specialty alloys using GTAW Must be able to occasionally work in confined spaces with limited access and heights. EDUCATION and/or EXPERIENCE: HS Diploma, GED or equivalent. Minimum 5 years of related experience or technical training or equivalent SKILLS and ABILITIES: Capable of reading advanced blueprints and weld symbols. Responsible for both fit up and welding of complex pipe spools. Understanding of GD&T. Ability to produce and use fixturing necessary to complete weldments/assemblies. Capable of completing weldments with consideration of tolerances, shrinkage and warpage. Operate shop machinery (band saw, brake press, shear, drill press, plasma cutter, etc.) Advanced ability to layout hole patterns, penetrations, properly aligning flanges. Ability to safely operate forklifts and cranes. Ability to perform various assembly tasks. Ability to fit and weld a variety of pipe thicknesses and diameters (0.5”-12” ⌀) PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to stand and use hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. CERTIFICATES, LICENSES, REGISTRATIONS, OTHER: MUST BE A US CITIZEN - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. ATG is unable to sponsor or take over sponsorship of an employment Visa at this time. Why join us? We take care of our people with: Competitive salary 120 hours of PTO and 8 paid holidays Health, dental, and vision insurance Life and disability coverage HSA/FSA options 401k match Wellness programs Learning, growth, and development programs We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description MFCP (Motion & Flow Control Products, Inc.) is the largest Parker Hannifin distributor and the premier unrivaled leader in motion and flow control solutions. We offer an expansive range of cutting-edge industrial systems and solutions designed to power the future of automation, hydraulics, pneumatics, aerospace, and beyond. Position Summary: A Welder Fabricator is responsible for, layout, welding and cutting, fabrication of structural and pipe as associated with hydraulic systems. The welder fabricator assists in all aspects of the HPU system build process and collaborates with the rest of the team. Primary Duties: • Individual must be a Certified Structural Welder per AWS D1.1, Dual Shield., • Must be Certified and understand the process of Welding High Pressure Pipe., • Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment., • Examine seams for defects and rework defective joints or broken parts., • Melt and separate brazed or soldered joints to remove and straighten damaged or misaligned components, using hand torches, irons, or furnaces., • Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment., • Clean workpieces to remove dirt or excess acid, using chemical solutions, files, wire brushes, or grinders., • Guide torches and rods along joints of workpieces to heat them to brazing temperature, melt braze alloys, and bond workpieces together., • Adjust electric current and timing cycles of resistance welding machines to heat metals to bonding temperature., • Clean equipment parts, such as tips of soldering irons, using chemical solutions, or cleaning compounds., • Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises., • Sweat together workpieces coated with solder., • Smooth soldered areas with alternate strokes of paddles and torches, leaving soldered sections slightly higher than surrounding areas for later filing., • Select torch tips, flux, and brazing alloys from data charts or work orders., • Clean joints of workpieces with wire brushes or by dipping them into cleaning solutions., • Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools., • Cut carbon electrodes to specified sizes and shapes, using cutoff saws., • Develop, maintain, and share current and new product knowledge., • Provide technical resources for others in the organization., • Address and resolve all customer requests, complaints, and objections with a positive and creative approach., • Coordinate efforts with all appropriate departments and personnel to ensure customer satisfaction., • Ensure that the highest level of customer service, ethics and teamwork are followed., • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Basic Requirements: • Experience working with and on welding, fabrication and hydraulic components and equipment., • Must understand measurement techniques and units including metric/SAE conversions and fractions., • Ability to read and understand hydraulic schematics., • Good mechanical aptitude with the ability to detect technical discrepancies and malfunctions., • Excellent oral communication and strong relationship building skills required., • Detail oriented with solid organizational skills and the ability to prioritize and multi-task in a fast-paced work environment., • Understanding of the proper use of all repair tools, testing machinery and equipment., • Must supply basic hand tools (wrenches, sockets, screwdrivers, pliers, etc.) Physical Demands and Work Environment: Ability to lift to 70 lbs. occasionally and up to 50 lbs. frequently. Frequent grasping, reaching, standing, and walking with occasional bending and kneeling. Work environment: primarily inside, workshop environment involving working at a bench or test stand in relatively proximity to other technicians with occasional work completed in the field. Occasionally, the work will require working underneath or on large equipment either in the shop or directly outside the shop. The physical demands, and work environment reflected, are representative of those encountered by employees when performing the essential job functions. Reasonable accommodations may be made to accommodate individuals with disabilities to perform the essential functions of the job. Salary: $26-$33/hour DOE Benefits: • Competitive salary, • Medical, Dental, Vision, • 401(k) Investment Plan, • Life Insurance, • Paid Holidays, • 3 Weeks Personal Time Off, • Earned Wage Access, • Incentive Programs - Employee referral program, • Training and progressive development programs available Candidates are subject to pre-employment criminal background, drug screen and DMV record review, along with possible reference checks. Equal Opportunity Employer - This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Pioneer Energy is seeking a highly experienced Fabrication Welder to support the construction of pressure vessels, modular process equipment, and complex piping systems. This position requires expert-level fabrication skills, the ability to produce welds to X-ray quality, and strong proficiency in vessel layout, pipe fit-up, and interpretation of fabrication drawings. Pioneer Energy develops and manufactures proprietary equipment that solves gas processing challenges in the oilfield through the development and deployment of new technology. Focusing on delivering innovations that address complex challenges in the oil and gas industry. We develop and introduce cutting-edge technologies to allow responsible, economical, and reliable operation of both renewable technologies and traditional hydrocarbon extractions. By leveraging creative solutions in both scale and approach, Pioneer Energy solves problems neglected by traditional approaches. The production team at Pioneer Energy is a small team of highly skilled, interdisciplinary individuals in welding, electrical, and HVAC who are passionate about their work. The team is seeking an experienced Welder who is self-driven and hardworking and excited to learn new things. Job Qualifications: · Minimum 5-10 years of experience in pressure vessel fabrication. · Ability to weld carbon steel and stainless-steel pipe (Sch 40, 80, 160) and structural components to code quality. · Preform advanced fit-up and welding of pressure vessels, process vessels, tube sheets, process piping and structural components. · Execute precise layout on vessel shells, heads, nozzles, and complex piping spools. · Cut, bevel, prep, and fit materials to code tolerances using oxy-acetylene, plasma, and grinding equipment. · Using FCAW, GMAW and GTAW process to ASME section IX for X-ray quality standards. Job Duties and Responsibilities · Collaborate with engineering and production to resolve drawing discrepancies or fabrication challenges. · Must be able to work independently and with a team. · Conduct visual inspection of welds and verify compliance with WPS requirements. · High degree of attention required to prevent injury to others; promotes a safe work environment. · Execute assignments in an accurate, timely, and safe manner. · Organized · Reliable and dependable · Loading and unloading materials with a Forklift · Operation of an Overhead Crain · Assisting welders and technicians in the Shop. · Operation of a bandsaw, power tools, and hand tools. · Clean up machines and work areas. Physical demands and abilities · Frequently lift up to 50 pounds and adjust body position to bend, stoop, stand, walk, turn, pivot, and stand for long periods of time. · Have a good sense of balance. · Having good eye-hand- foot coordination. · Ability to work in a varying temperatures, depending on the season. (but most of the work will be performed inside our shop.) Company DescriptionPioneer Energy is an original equipment manufacturer (OEM) that designs and builds innovative, cloud-enabled technologies to help energy producers reduce emissions while meeting production goals. Our proprietary systems process wellhead fluids more efficiently, stabilize crude oil to meet GOR and RVP targets, and condition gas streams for in-field use. We also offer equipment that captures or eliminates emissions and turns otherwise flared or wasted streams into valuable, revenue-generating products. All our systems are modular, skid- or trailer-mounted, and autonomous, providing oil producers with maximum flexibility, uptime, and cost-efficiency—all while staying ahead of evolving regulations. Join us in transforming the energy landscape with practical innovation and real-world impact. www.pioneerenergy.comPioneer Energy is an original equipment manufacturer (OEM) that designs and builds innovative, cloud-enabled technologies to help energy producers reduce emissions while meeting production goals.\r\n\r\nOur proprietary systems process wellhead fluids more efficiently, stabilize crude oil to meet GOR and RVP targets, and condition gas streams for in-field use. We also offer equipment that captures or eliminates emissions and turns otherwise flared or wasted streams into valuable, revenue-generating products.\r\n\r\nAll our systems are modular, skid- or trailer-mounted, and autonomous, providing oil producers with maximum flexibility, uptime, and cost-efficiency—all while staying ahead of evolving regulations.\r\n\r\nJoin us in transforming the energy landscape with practical innovation and real-world impact.\r\n\r\nwww.pioneerenergy.com

Job Description Partner. Energize. Deliver. Join our Denver team as a Welder and Fabricator and become an employee-owner of a nationally recognized Top Workplace! Why Work with Us? Benefits, Compensation, Community Involvement and Employee Appreciation Each member of the Guarantee team is an essential partner in building our successful future. Guarantee offers a rewarding career path, a competitive salary, and excellent benefits package. This includes an Employee Stock Ownership Plan (ESOP), which is 100% company funded and employee owned. We own it! As employee-owners, we work with and for each other. We share a commitment to excellence and know that our efforts deliver exceptional results. We offer robust benefits with a competitive salary based on knowledge and experience. Employees are also eligible for annual discretionary bonuses. We offer a benefits package including medical, dental, vision, accidental, critical illness, life and disability insurances, vacation/sick time, and a matching 401K plan. Our GECO Gives program highlights our mission to give back to our communities through community outreach, philanthropy and volunteering. Some of our favorites being Pedal the Cause, KIDstruction, Big Brothers Big Sisters and more! Responsibilities • Proficient in MIG welding and able to pass 3G GMAW test, • TIG experience a plus but not required, • Fabricate underground steel structures used to support electrical conduit raceways, • Assemble and weld custom fabricated components through accurately reading blueprints/drawings or direction from supervisors, • Working knowledge of welding procedure specifications (WPS), • Operate fabrication equipment including saws, grinders, drills, ironworkers, and other shop tools, • Perform metal preparation including measuring, cutting, deburring, grinding, and cleaning materials, • Assist with bending, fitting, and assembly of fabricated products, • Inspect completed welds and assemblies for quality and accuracy, • Maintain a clean, organized, and safe work environment, • Follow all company safety policies and manufacturing procedures, • Support general shop operations and other fabrication-related duties as assigned Qualifications • Previous welding experience required, • Capability to qualifying procedures for carbon steel and aluminum., • Ability to read tape measures, shop drawings, and basic fabrication layouts, • Familiarity with metal fabrication tools and equipment, • Ability to safely lift materials and work in a manufacturing environment, • Strong attention to detail and commitment to quality workmanship, • Reliable attendance and positive team-oriented attitude Knowledge, Skills, and Abilities • Able to work under pressure and prioritize between competing demands, • Strong analytical and problem-solving skills, • Strong attention to detail and ability to effectively change priorities as needed if urgent needs arise, • Able to complete assigned tasks accurately and on time with minimal supervision, • Excellent interpersonal skills and ability to work in a collaborative environment, • Ability to stand for extended periods, • Ability to lift and move materials up to 50 lbs, • Ability to pass med fit test for respiratory protection and work in a manufacturing/shop environment around welding and fabrication equipment Working Environment ☒Office All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. For more information about Guarantee Electrical Company, please visit www.geco.com

Job Description Company: Rio Grande Co. Position Title: Welder Department: CRPD Reports To: Fabrication Supervisor FLSA Status: Hourly Location: Denver, CO Position Summary Welders are involved in the fabrication and welding of structural steel and ornamental iron products. Fabrication work may include cutting, bending, drilling, welding and painting of materials and are required to operate forklifts and other steel fabrication equipment. Steel fabricators are involved in assisting customers, suppliers and fellow employees. About Rio Grande Co. Founded in 1893, Rio Grande Co. has proudly served the Denver and Rocky Mountain region for over 132 years. What began as a fuel and feed business has grown into a trusted distributor, fabricator, and building materials resource supporting construction projects across Colorado. As a multi-generational, family-led company, members of the Peterson family – Erik, Elmer, Donald, and Bruce – have guided our growth and long-standing contribution to Colorado’s construction industry. At Rio Grande Co., we build more than structures — we build teams, careers, and futures. What sets us apart: • A family-founded culture that prioritizes people and relationships, • A workplace grounded in safety, respect, and accountability, • Transparent leadership and clear expectations, • Investment in employee development and training, • A commitment to doing the right thing for our employees, customers and communities Key Responsibilities • Ensures that fabrication is completed accurately, timely and in a safe and efficient manner., • Performs the appropriate calculations when cutting/fabricating materials to maximize product usage and limit the amount of waste or drop., • Set up and operate welding machines based on shop floor jobs and welding specifications., • Read and interpret drawing and prints to determine the specific welding requirements., • Calculate and use charts to convert decimals to fractions as well as the ability to use tape measures and angle gauges, • Knowledge of production processes, quality control and other production techniques that will maximize the effective manufacturing of our products, • Must be able to work in a culture of continuous improvement, where accountability for the work done is expected., • Ensures that work is accomplished safely and meets efficiency and quality standards, • Detail oriented and ability to read and interpret technical documents, drawings and blueprints, • Produce fabricated steel products in a timely manner while maintaining a high quality of workmanship., • Ensures a safe work area in compliance with Company and OSHA policies. Keeps the fabrication shop near and orderly., • Maintains all equipment in good working condition., • Processes paperwork in accordance with Company policies., • Keeps Supervisors informed of shortages, overages, or damaged materials; refers customer complaints/compliments to Supervisor., • All other duties assigned. Qualifications • 3-5 years fabrication & welding structural steel experience, • Ability to lift up to 100 pounds and stand for long periods of time, • Ability to utilize fabrication/welding equipment, such as punches, shears, press brakes and other equipment, • Welder Certifications between 1G-6G, • Personable with good communication skills, • Valid Driver’s License Physical & Environmental Requirements Work Environment: Physical Demands: Rio Grande Co. offers a competitive benefits package, including: • 401(k) Plan, • Discretionary Employer Matching & Profit Sharing, • Paid Sick, Vacation, Jury Duty, and Bereavement, • Multiple medical plan options, • Dental and Vision insurance, • Health Savings Accounts (HSA) and Flexible Spending Accounts (FSA), • Company-paid and voluntary life insurance, • Short-term and long-term disability coverage, • Accident and supplemental insurance, • Paid training and career development, • Employee Assistance Program (EAP), • Other value-added employee benefits Additional compensation may include performance-based bonuses or incentives, depending on role-specific goals and company performance. Equal Opportunity Employer Statement Rio Grande Co. is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, regardless of race, color, religion, national origin, gender, sexual orientation, age, disability status, protected veteran status, or any other characteristic protected by law, in accordance with Colorado Department of Labor regulations. Application Information This position will remain open until a sufficient pool of qualified applicants has been identified. Interested candidates are strongly encouraged to apply early.

Job Description Coggins & Sons, Inc. is a caisson drilling and shoring contractor located in Littleton, Colorado. We have job sites located throughout the Denver area as well as the entire Rocky Mountain region. We are looking for motivated individuals to join our team on a long-term basis and work their way up the ranks in our company. Hours of work: Monday-Friday, 7:00 am – 3:30 pm. Must be willing to work any required overtime and weekends as needed to ensure projects are completed in a timely manner. This position starts at $26/hour, depending on experience. Benefits include health insurance after 60 days and a company profit-sharing retirement plan following 3 years with the company. Job duties/responsibilities: · Repair and maintain caisson and earth retention drilling equipment · Construction welding · Fabrication · Load and unload steel trucks, equipment, and tool trucks · Flexible enough to adhere to specialized safety rules as well as other “job-specific” rules encountered Qualifications/Requirements: · Must be authorized to work in the US · Must be at least 18 years old · Valid driver’s license and reliable transportation to get to various job sites (Class A or B CDL and a clean driving record is a plus) · Must be able to pass a criminal background check · Must be able to pass drug screenings (pre-employment and random) · Must be available for out-of-town work · Minimum of 2 years stick welding experience · Must be able to work in all weather conditions · Must be able to show up to work on time every day · Ability to receive direction and work with others as a team Coggins & Sons provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Company DescriptionCoggins & Sons, Inc. is a caisson drilling and shoring contractor located in Littleton, Colorado. We have job sites located throughout the Denver area as well as the entire Rocky Mountain region. We are looking for motivated individuals to join our team on a long term basis and grow with the company. We have more than 60 years of experience in the industry which is not possible without a strong supporting staff. We have one of the best safety records in the industry and our commitment to safety ensures that each and every employee returns home in the same condition they came to work.Coggins & Sons, Inc. is a caisson drilling and shoring contractor located in Littleton, Colorado. We have job sites located throughout the Denver area as well as the entire Rocky Mountain region. We are looking for motivated individuals to join our team on a long term basis and grow with the company. We have more than 60 years of experience in the industry which is not possible without a strong supporting staff. We have one of the best safety records in the industry and our commitment to safety ensures that each and every employee returns home in the same condition they came to work.

Job Description We are seeking an Ornamental Steel Fabricator to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload

Job Description Craftsmanship-driven metalwork, real autonomy, direct access to leadership, and room to grow with a shop that values family, quality, and pride in the finished product. MetalArc is hiring a Senior Fabricator for custom architectural and miscellaneous metalwork in Englewood, Colorado. This is a hands-on fabrication role first. We are looking for someone who can independently build from drawings, produce clean finished work, help train others, and act as a steady point-guard in the shop when needed. This is not a desk-manager role. You will be expected to fabricate, fit, weld, finish, solve problems early, and help keep work moving to a high standard. Our work includes stairs, rails, gates, canopies, ramps, fencing, structural support work, and custom one-off pieces across commercial, residential, stainless, aluminum, steel, and occasional brass projects. Much of the work is custom and detail-sensitive. Some weeks are shop-heavy; some require field work and install support. What success looks like In the first 90 days, a strong hire will: • own quality control on their work and help raise the bar around them, • reduce remake and rework through stronger planning, fit-up, and early issue flagging, • help the team hit install deadlines and stay aligned with budget goals What you will do • fabricate architectural and misc. metal projects from shop drawings, • handle layout, fit-up, welding, finishing, and final quality checks, • build stairs, rails, gates, canopies, ramps, fencing, and related custom assemblies, • identify missing dimensions, constructability issues, and RFI items before fabrication starts, • help assign or sequence work for small crews when needed, • train and correct less-experienced fabricators in the flow of work, • coordinate with field conditions and support installs as needed, • communicate clearly with ownership, teammates, installers, and site contacts about issues before they become rework, • represent MetalArc professionally on jobsites and in clients’ homes, • maintain a clean, safe, quality-driven work area Must-have qualifications • 5+ years of relevant fabrication experience, • strong stairs and rail fabrication experience, • strong blueprint reading and layout ability, • shop and field experience, • fitting, MIG, TIG, and FCAW capability, • strong finishing standards, • quality-control mindset, • rigging and forklift familiarity, • ability to work independently from drawings without constant supervision, • strong communication, jobsite professionalism, and judgment when representing the company in the field Nice to have • stainless and aluminum experience, • field measurement experience, • informal lead experience with small crews, • CAD familiarity, • install coordination, • project management awareness, • CNC laser, painting, maintenance, woodworking, or mechanical/electrical crossover experience What this role is • about 50% fabrication, • about 25% QA and final signoff, • about 15% planning and coordination, • about 10% training and supervision What this role is not • not a pure installer role, • not a pure welder role, • not a manager who stays off the tools, • not a fit for someone who does not care about clean finish standards, urgency, or helping grow the business Schedule and work environment • full-time, • Monday-Friday, • 40 hours expected, • consistent schedule preferred, with some flexibility in 5x8 or 4x10 structure, • overtime may be available as needed, but is generally voluntary, • mix of shop work and field/install work, • company truck available for local job movement around town Pay and benefits • $28–$35 per hour, • project bonus opportunities, • 3% finder’s bonus, • medical, dental, vision, retirement savings, and family leave, • paid holidays after 30 days, • PTO after introductory period, • tool allowance, • long-term growth opportunity with no fixed ceiling for the right person Why MetalArc MetalArc offers direct access to leadership, real autonomy, varied custom work, strong craftsmanship standards, solid equipment, and a shop culture built around family, pride in the work, and shared growth. Company DescriptionMetalArc builds fabricated architectural, ornamental, and miscellaneous metals in Englewood, CO. We do detail-driven work—rails, stairs, guards, and light-structural/misc steel—serving both commercial sites and high-end residential. We run on clear standards: safety, craftsmanship, reliability, and respect for the people doing the work. We care as much about tight fit/finish and clean installs as we do about throughput and schedule discipline.MetalArc builds fabricated architectural, ornamental, and miscellaneous metals in Englewood, CO. We do detail-driven work—rails, stairs, guards, and light-structural/misc steel—serving both commercial sites and high-end residential. We run on clear standards: safety, craftsmanship, reliability, and respect for the people doing the work. We care as much about tight fit/finish and clean installs as we do about throughput and schedule discipline.

Job DescriptionTop Job Located in Englewood, CO Salary: $25-$30/hr. TIG Welder / Fabricator (Aluminum) We are seeking a highly skilled and precision-focused TIG Welder / Fabricator to join our production team at Crone. This specialized role focuses entirely on custom, non-structural aluminum fabrication. You will work on lightweight components, architectural details, enclosures, or cosmetic fabrications where weld aesthetics, clean finishes, and strict dimensional accuracy are vital. This position requires exceptional torch control, a deep understanding of aluminum heat management, and the ability to work directly from technical drawings to fit and finish custom parts. • Schedule: Monday-Friday, Day Shift, • Position Type: Full-Time / Evaluation Hire Key Responsibilities • Precision TIG Welding: Perform high-quality, cosmetic-grade TIG (GTAW) welding on thin-gauge and medium-gauge aluminum sheets, tubing, and custom components., • Non-Structural Fabrication: Lay out, fit, tack, and assemble complex, non-structural parts according to engineering drawings and technical schematics., • Material Prep & Finishing: Ensure proper cleaning and prepping of aluminum joints to prevent contamination. Perform precise post-weld blending, grinding, and finishing to deliver clean, smooth, and visually flawless welds., • Blueprint & Symbol Interpretation: Accurately read and interpret blueprints, fabrication drawings, and welding symbols to verify correct angles, tolerances, and dimensional specs., • Shop Tool Operation: Safely set up and operate TIG welding machines (adjusting amperage, balance, and gas flow) along with standard fabrication equipment like band saws, grinders, notches, and precision measuring tools. Job Requirements & Physical Demands • Experience: 2+ years of dedicated TIG welding experience, specifically working with aluminum in a precision fabrication shop or custom manufacturing environment., • Technical Skills: Expert control over aluminum heat distortion, puddle manipulation, and weld penetration. Strong blueprint reading and layout layout skills., • Weld Test: Must successfully pass a non-structural aluminum TIG weld test (demonstrating clean bead profile, consistent penetration, and absence of porosity)., • Physical Ability: Fine motor skills, excellent hand-eye coordination, and the ability to stand, bend, and lift up to 50 lbs. as needed., • Detail-Oriented: A passion for meticulous workmanship, clean aesthetics, and tight tolerance compliance. #2989ST Express Office: Centennial 12200 East Briarwood Avenue #148 Centennial, CO 80112

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Denver, CO. Most positions are first shift with a pay scale of $28-38/hour based on experience & skill level with Travel Work Available. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Flat/Vertical Carbon Steel Requirements: • 2+ Years of Experience in the Field, • Basic Tools for the Trade, • Must have AWS Certification, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? • Accelerated Career Growth!, • Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: • Provide technical support to production staff and troubleshoot welding related issues., • Design and implement new welding processes or improve existing ones to enhance efficiency and profitability., • Conduct research and development activities to improve welding techniques, procedures, and applications., • Perform welding procedure and welder performance qualifications in accordance with required codes and standards., • Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process., • Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes., • Provide training and guidance to production staff on advanced welding techniques and technologies., • Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met., • Utilize CAD software to design and optimize welding fixtures and tooling., • Implement Lean manufacturing principles to improve efficiency and reduce waste., • Operate and program robotic and laser welding machines. Qualifications: • Bachelor’s degree in Welding Engineering, Mechanical Engineering, or a related field., • A minimum of 2 years’ experience in a similar role within the manufacturing industry., • Strong knowledge of welding processes, procedures, and safety standards., • Proficiency in CAD software., • Experience with Lean manufacturing principles., • Experience with robotic and laser welding., • Ability to read and interpret blueprints and engineering plans., • Excellent problem-solving skills and attention to detail., • Strong communication and interpersonal skills., • Ability to work in a fast-paced, high-pressure environment., • Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Lynch Denver is seeking motivated and aspiring technicians to join our team! Alongside an experienced technician, you will be installing and building electrical and hydraulic systems, welding and fabricating, providing service information and recommendations to customers, and maintaining dealership quality standards. Lynch is a family-owned group of Automotive Dealerships and Commercial Truck Centers that has been operating for over 65 years! Lynch offers competitive compensation packages, as well as the best benefits in the industry. What this means for you is lower premiums, lower deductibles, and better overall coverage. As we continue to grow our business, we also grow our biggest asset—our talented staff! We have countless internal promotion and advancement opportunities for you to further your career! Join a family-owned company with family values! Lynch is proud to offer industry leading income and benefit opportunities: • Health Insurance, covering 100% preventative care, starting at $140/month for single coverage and $570/month for family coverage, • 401K with a company match of $0.30 cents on the dollar up to 5%, plus a fiscal year end discretionary match that in previous years was an additional 1.5%., • Dental & Vision Coverage, • Company paid Short Term Disability & Life Insurance, LTD Insurance, FSA, Employee Assistance Program, Wellness program, Gym Membership Discount, PTO & Holiday Pay, Bereavement Pay, Employee Parts & Service Discount, Employee Vehicle Discount, and Referral Bonus, • Part-Time Employees are eligible for: 401K, Employee Assistance Program, Referral Bonus, and Employee Parts & Service Discount Requirements • Valid driver's license and an excellent driving record, • Must be dedicated to arriving on time, with a positive attitude, • Motivated self-starter with a strong work ethic, • Must have the ability to multi-task, • Must have strong customer service skills, • Ability to thrive in a fast-paced environment We will consider candidates with experience in the following areas: • Forklift Mechanic, • Hydraulic Mechanic, • Electrical Technician, • General Service Mechanic, • Welder

As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services.Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collab

Set-up, thread the material through, and operate independently one machine (Shear, PNL, Turret, Brake Press, Robotic Cell, Cut-to-Length, Roll Forming/Seaming, Press Lock, Welder/Paint Booth).

As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services.Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collab

Become a valued member of our team as a Shop Welder, where you'll engage in hands-on work operating and maintaining welding equipment, interpreting blueprints, and ensuring high-quality welds. Whether you're beginning your welding career or bringing extensive experience, you'll have opportunities to grow, mentor others, and support continuous improvement in a safe, collaborative environment. • 3+ years of welding and metal processing experience (FCAW, MIG, in multiple modes of transfer), • Ability to read blueprints and weld symbols, • Can weld light metals and medium-complexity components

The Shop Pipe Welder is a highly skilled member of our fabrication team, responsible for producing precise, high-quality welds and assemblies that meet the strictest industry and customer standards. From interpreting blueprints and weld symbols to setting up fixtures and performing X-ray quality welds, this role requires technical expertise, craftsmanship, and attention to detail at every stage of production. In this position, you'll work with advanced equipmentincluding overhead cranes, weld machines, and precision measuring toolswhile collaborating with fabricators, foremen, and superintendents to keep projects on schedule. Your ability to fit, weld, and assemble process piping, hydronics, and pressure vessels to ASME and B31 codes ensures every product is built to last and delivered with excellence. Shop Fitter Welders are valued for their hands-on expertise, reliability, and commitment to safety. Their work lays the foundation for field success, ensuring every system fabricated in the shop is accurate, durable, and ready for installation. RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Perform trade specific quality work consistent with CAD/FAB and Energy procedures to ensure product meets or exceeds customer expectations. • Operate trade specific machinery and trade specific tools (i.e., calipers, weld gauges, tape measures, and other welding hand tool)., • Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, weld symbols, bills of materials, and other written instructions or procedures to accurately create equipment and products.., • Identify product defects and effectively communicate defects to project foreman., • Follow P&IDS for assembly tracks on projects., • Create specific weldment set-ups and fixturing to meet geometric requirements., • Working with overhead cranes, jib cranes, and forklifts., • Work closely with other fabricators, welders and laborers to improve their skills and provide training., • Maintain weld machines using preventative maintenance methods., • Continually evaluate weld machine performance and technology to improve cycle times., • Assist shop foreman or superintendent with production tracking and to insure production goals are met., • Communicate status of orders to the foreman or shop superintendent., • Prioritize work flow through effective communication with management staff., • Perform prioritized work flow assignments as directed by foreman or shop superintendent., • Ability to maintain welder certification per customer and company procedure specifications., • Perform X-Ray Quality Welds on process piping, hydronics, and pressure vessels., • Using shop blueprints, Fit up X-ray quality weld joints., • ASME Pressure Vessel, Piping, Welding to B31.1, 31.3, 31.9 Criteria., • Maintain a clean and safe work area., • Other Duties as assigned. Qualifications • 5 years of experience, 3 years welding experience minimum preferred., • Familiarity with welding on a rotator, understands fitting up with a rotator in mind., • Knowledge of various welding techniques, with a strong requirement of TIG welding experience. Familiarity with MIG and ARC welding processes is also preferred., • Knowledge of metallurgy., • Knowledge of manual and mechanical welding techniques., • Knowledge of pipe trade tools (Two-Hole Pins, Center-finders, Pipe wraps, Angle finders), • Prior to being hired must be capable of proficiently passing 6G FCAW weld test., • Within one week of hire must be capable of passing a 6G GMAW weld test. Also to include SMAW, GTAW, pulse highly desired skills., • At 60 Days after being hired, employee must provide his/her set of hand tools. ( Hammer, pliers, channel locks, sockets, tape measurer... etc.), • At 90 days after being hired, is able to meet productions goals., • Receives minimal supervision, coordinates own tasks with a specific range of responsibilities under established procedures., • Excellent communication skills, both verbal and written., • Requires judgment or initiative in resolving issues and making recommendations. Minimum Physical Requirements • Work outside, inside, and in dusty, noisy and hazardous areas., • Work in high places, tight places, confined spaces and/or other adverse locations., • Climb, balance, squat, kneel and crouch., • Work in all types of weather., • Must have working knowledge of all trade materials and tools., • Ability to lift and carry 51 to 75 lbs. occasionally, and/or 31 to 45 pounds of force frequently, and/or greater than negligible up to 16 to 22 pounds of force constantly to move objects What Sets RK Industries Apart • Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day., • Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry., • Benefits & Rewards: RK Industries offers competitive benefits to support your growth and well-being., • Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation., • Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program. Applications are accepted on an ongoing basis. RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law.

Set up, operate, and maintain welding and trade-specific equipment for optimal performance. Interpret work orders, blueprints, weld symbols, and technical drawings to determine requirements and specifications. Select appropriate machinery, materials, and operational sequences based on project needs. Perform welding and inspection tasks to ensure compliance with quality standards. Use precision measurement tools to maintain proper dimensions and alignment. Qualifications 2+ years of welding and metal processing experience (FCAW, MIG) Ability to pass 3g FCAW weld test Performs basic welding tasks under supervision Reads simple blueprints and weld symbols Performs basic equipment maintenance Demonstrates foundational math and safety knowledge

The Pipe Welder is a key contributor in our fabrication team, specializing in high-quality welding and fitting work that ensures the structural integrity and performance of critical systems. This role brings advanced technical skill to every step of the process, from blueprint interpretation and setup to producing X-ray quality welds. You'll work alongside experienced professionals using state-of-the-art equipment, with opportunities to expand your expertise in ASME pressure vessels, piping, and precision welding. Whether you're aiming to lead teams or become a recognized specialist, this role builds a solid foundation for your career. Qualifications • 5 years of general experience, 3 years of welding experience preferred., • Prior successful completion of a 6G FCAW weld test required before hire., • Must pass 6G FCAW weld test within one week of hire (FCAW, SMAW, GTAW, pulse preferred)., • Familiar with welding on rotators and corresponding fit-up., • Experience with MIG, ARC, and preferably TIG welding processes., • Knowledge of metallurgy and mechanical welding techniques., • Familiarity with pipe trade tools (e.g., Two-Hole Pins, pipe wraps, center-finders)., • At 60 days: must have own set of hand tools., • At 90 days: must meet production goals., • Minimal supervision required; able to coordinate own tasks., • Excellent written and verbal communication skills., • Good judgment and initiative in resolving issues.

Job Description Split Shift Maintenance Lead: Monday through Friday from 7:30am - 4:00pm with a 30 minute lunch break. Summary The maintenance lead is responsible for the proper repair and servicing of the company's equipment, machines, tools and the likes. Essential Duties Listed below are the typical duties and responsibilities of this position. Other duties may be assigned as needed. -Change over and adjust machines as production schedule warrants -Repair machines when needed -Follow specific PM/ Machine Inspection duties -Keep an organized and clean maintenance department -Requisite machine parts and supplies -Direct and supervise other maintenance personnel Supervisory Responsibilities -Must have strong supervisory skills and ability to work with others from all different departments. -Able to work independently with minimal supervision at times -Provide leadership for other maintenance staff -Apply organizational policies and assures adherence to departmental procedures Required Qualifications -Minimum 5 years of related work experience. Supervisor experience preferred. -Vocational or related training in mechanical fields is preferred. -Must have good knowledge of 3 Phase Electrical Power, Industrial Control Circuitry, and ability to read electrical schematics. Understanding of programmable logic controllers (PLC's) and AC Inverters. -Must have good knowledge of pneumatic operations and controls -Must be able to trouble shoot mechanical, electrical and pneumatic problems on equipment -General knowledge of safe maintenance guidelines (lock out/ tag out, etc.) -Experienced and proven welder (mig, tig and arc) -Solid fabricating experience for miscellaneous parts, guards, racks, stands, etc -Basic knowledge of a personal computer Education and Experience -High School Diploma or G.E.D -Vocational or related training in mechanical field preferred -Experience in fast paced manufacturing plant preferred -Bilingual English/Spanish is not required but is a plus. Physical Demands The physical demands here are representative of those that must be met by an employee to successfully perform the essentials of this job. -While performing duties of this job, the employee is regularly required to stand, sit, type walk, bend, kneel, lift or climb a ladder. -The employee must occasionally exert or lift up to 75 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. -Noise levels on occasion can be more than moderate -Plant temperatures on occasion can be more the moderate

Job Description Classification: Non-Exempt Monday-Friday; Saturday work after a Holiday. $21.75-$39.00/Hour We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: • 401K Plan with Company Match, • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities, • Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred., • Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

We are looking for a skilled welder to cut and join metals and other materials at our facilities or construction sites. A welder must be competent in using potentially dangerous equipment following all safety precautions.

As a Welder Level 2 here at Honeywell, you will perform skilled welding tasks to fabricate, assemble, and repair metal components and structures. Proven experience as a welder with a minimum of Level 2 certification or equivalent skills.

Welder | Metal Fabricator: Hours: Monday - Friday, 8:00 AM - 5:00 PM - Pay Rate: $19-24/hr. We are seeking experienced, skilled wel Metal Fabricator, Welder, Metal, Fabricator, Staffing, Staff, Manufacturing.

Trillium Construction is seeking AWS welders near Aurora, CO for a structural steel erection on a commercial high school build raising and connecting steel columns, beams, and joists, rigging and signaling crane picks, installing metal decking, bolting connections, and welding structural connection

MIG, TIG, Welder Certification a plus. Sturgeon Electric Manufacturing has an opening for a highly skilled welder. We expect our welders and fabricators to complete each job within specific deadlines.

The welder is responsible for fabricating, fitting, repairing, and welding metal components used in the production of building products, structural assemblies, and related equipment.

If you are a welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career!.

Welder Fabricator - Motion Solutions. Position Summary: A Welder Fabricator is responsible for, layout, welding and cutting, fabrication of structural and pipe as associated with hydraulic systems. The welder fabricator assists in all aspects of the HPU system build process and collaborates with the

Campos Fabrication is currently seeking a skilled and experienced Pipe Welder to join our team at our new facility near Commerce City, CO.

As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services.Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collab

Denver, CO or Long Beach, CA Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it. True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground. Our values: • Be the offset. We create asymmetric advantages with creativity and ingenuity., • What would it take? We challenge assumptions to deliver ambitious results., • It's the people. Our team is our competitive advantage and we are better together. Your mission: We are seeking a Manager of Tooling & Mechanical Ground Support Equipment (MGSE) Engineering to build, lead, and develop a high-performing team of tooling and MGSE engineers across our Space Systems and Missile Defense programs. This is a people leadership role that also maintains your connection to the work through executing scope. You will own the organizational health, develop department best practices, standard process, requirements, technical direction, hiring, and career development of a team spanning entry-level through staff-level engineers working on spacecraft AI&T tooling, mechanical GSE, special test equipment, and missile defense integration tooling. You will partner closely with program management, flight engineering, as well as manufacturing and test to ensure the tooling function delivers with speed, precision, and quality across all active programs and balance stakeholder needs. If you are a seasoned tooling engineer who is ready to lead a team doing some of the most consequential manufacturing engineering work in the defense space industry, this is your mission. Responsibilities: • Build, lead, and develop a team of Tooling & MGSE Design Engineers across Spacecraft and Missile Defense programs at GravityWorks Denver and Long Beach facilities., • Own all people management responsibilities: hiring, onboarding, performance management, compensation reviews, career development, and succession planning., • Partner with recruiting to define roles, calibrate levels, and close top talent; actively contribute to technical screens and hiring decisions., • Set clear performance expectations and individual development plans; identify and grow future technical leads and staff engineers., • Foster an inclusive, high-trust team culture grounded in True Anomaly's values of relentless ownership, intellectual curiosity, and first-principles thinking. Technical Authority & Engineering Standards: • Serve as the engineering authority and escalation point for tooling and MGSE design decisions across all active programs., • Develop and maintain tooling engineering standards, design practices, and configuration control disciplines; own the process from requirements definition through fabrication, acceptance, and production use., • Establish design review cadence, perform technical checker duties on high-criticality deliverables, and ensure quality and completeness of all tooling data packages., • Ensure the MGSE function is effectively represented at program-level design reviews (PDR/CDR); interface with program managers, chief engineers, and government customers on tooling status, risk, and schedule. Program Execution & Vendor Management: • Lead resource planning and capacity management; balance engineer assignments across concurrent Spacecraft and Missile Defense programs and flag resourcing gaps to leadership., • Own the vendor management framework: guide SOW/RFQ development, support source selection, and provide executive oversight of supplier performance across the fabrication portfolio., • Drive DFM/DFMA culture across the team and into upstream hardware design organizations; establish formal touchpoints between tooling engineers and external stakeholders., • Champion continuous improvement in tooling design efficiency, fabrication cycle time, and manufacturing repeatability. Qualifications: • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or related STEM field. Graduate degree strongly preferred., • Minimum 8 years of professional experience in tooling, MGSE, or manufacturing engineering within aerospace or defense, with at least 3 years in a formal people management role leading a team of engineers., • Clear understanding of product life cycles and program execution ability to develop execution plans with little information provided, • Demonstrated success hiring, developing, and retaining engineering talent across multiple experience levels (entry through staff)., • Expert proficiency in 3D CAD (CREO, NX, or CATIA V5) and PLM/PDM configuration management (Windchill or Teamcenter)., • Strong application of GD&T (ASME Y14.5) and advanced tolerance analysis; qualified to serve as technical checker for team and vendor designs., • Proven track record managing a complex tooling portfolio across multiple concurrent programs from concept through sustained production., • Deep vendor management experience: SOW development, source selection, performance management, and disposition of non-conformances., • Strong cross-functional leadership; ability to influence program management, flight engineering, manufacturing, and quality organizations without direct authority., • Executive-level communication skills; experienced presenting to senior leadership, customers, and government stakeholders., • U.S. citizenship required; active Secret clearance required. TS/SCI eligibility required for certain program assignments. Preferred Skills and Experience: • Direct management experience leading tooling or manufacturing engineering teams of 5 or more engineers in an aerospace or defense environment., • Hands-on experience in both spacecraft/satellite AI&T tooling and missile defense tooling or GSE; depth in one domain or the other is preferred - meaningful exposure to the other is a added bonus., • Experience building tooling engineering functions from the ground up at a high-growth defense or new space company, including role ladders, hiring processes, and team standards., • Structural weldment design for aerospace GSE: weld joint design, AWS A2.4 symbol specification, distortion control, material weldability, and WPS/welder certification vendor qualification., • Structural analysis capability (ANSYS, FEMAP/NASTRAN); experience qualifying lifting and handling equipment to ASME BTH-1, NASA SP-8077, and MIL-STD-882E., • Familiarity with MDA program office requirements and DoD/MDA acquisition processes for tooling and GSE on classified or sensitive programs., • Experience managing ATF Employee Possessor status programs and ordnance-adjacent manufacturing safety regimes., • Active Secret or TS/SCI clearance. Compensation: • Base Salary: $140,000-$225,000, • Equity + Benefits: including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. Additional requirements: • Ability to maintain or obtain TS//SCI clearance, • Work Location: this role will be onsite at either our Centennial, CO or Long Beach, CA location, with travel to other sites as needed., • Work environment: is in a standard office, working at a desk or in a production factory., • Physical demands: may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs. This position will be open until it is successfully filled. To submit your application, please follow the directions below. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Build a Rewarding Career with Plumbline Services.Plumbline Services is seeking motivated and customer-focused HVAC Maintenance Technicians to join our growing team.If you enjoy working with your hands, solving problems, and helping homeowners keep their systems running efficiently, we want to hear f

COLORADO - DENVER - DENVER, CO 80239.Level Experienced Position Type Full Time Job Shift Any Education Level High School Travel Percentage None Category Manufacturing.Rebar Fabricators to safely and efficiently fabricate orders that meet both company and customer expectations.Essential Functions and