Offres sales engineer à Buffalo, New YorkCréer des alertes d'emploi

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for the operation of all fabrication equipment associated with the manufacture and assembly of metallic products supplied to the construction industry. More specifically, this position will be responsible for operating machines such as machine center helper, saw, ironworker, bender, drill press, punch, shot blaster, vulcanizing equipment, and a variety of portable hand tools. Attention to safety and quality is essential to this position, as well as the skills necessary to assemble simple expansion joints. Qualifications • High school diploma or equivalency required, additional course work with emphasis on machining processes and programming preferred., • Previous relevant experience in an industrial fabrication shop preferred., • Ability to read and understand shop drawings and other written instructions., • Ability to use hand tools and all equipment in assigned area to form, machine, and blast in the process to join components together into sub-assemblies and assemble into finished engineer-to-order products., • Ability to maintain productivity, accurately check quality, and follow pre-established procedures and guidelines from start to finish., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionJob Requirements The Senior Sales Engineer (SE) is responsible for elevating awareness to Stark Tech's core competencies and capabilities through active account management with assigned accounts to achieve revenue and profit targets. This individual will work with management and peers on account management, sales strategies and goal achievement, project design, project bidding, project management, and pipeline management. In addition, this role will be a strong technical resource for customers and will develop professional relationships with the manufacturers that Stark's Building Solutions Sales & Marketing team represents. Work Experience • Associate's degree in engineering required. Bachelor's degree preferred., • 10 years of experience in sales engineering., • A proven track record in account management., • Knowledge of construction industry., • Understanding of product and systems application and design & project management., • Strong Computer skills including Microsoft Office Suite is essential. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. Company DescriptionAt Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Mechanical Design Engineer \n \n Company Description \n \n My client, a large industrial equipment company that have customers in a wide variety of industries, are looking for a full-time Mechanical Design Engineer, at their site north of Buffalo, NY. This is an onsite position that is involved with the development and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input that perform in an efficient and reliable manner while satisfying customer needs. \n \n Role responsibilities: \n \n\n • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor.\n, • Have specific knowledge of project routings and elevate potential issues to supervisor.\n, • Have a complete understanding of project specifications and customer expectations.\n, • Read and interpret P&ID (Process and Instrumentation Diagrams).\n, • Identify discrepancies or lack of information in available project documentation to supervisor\n, • Select and source common mechanical components.\n, • Develop complete definition of mechanical components for communication to vendor for purchasing.\n, • Understand and adhere to product design standards and guidelines.\n, • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation.\n, • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits.\n, • Understand in-house fabrication and testing capabilities. Design products for manufacturability.\n, • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details.\n, • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance.\n, • Manage multiple projects and balance requirements to keep all jobs on schedule.\n, • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills.\n\n \n \n Requirements \n \n\n • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology from a 4-year accredited college or university.\n, • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques.\n, • Experience in complex equipment design.\n, • Previous manufacturing floor and design exposure experience.\n, • At least two years of experience in a similar design role.\n\n \n \n This role is paying an excellent basic salary in addition to a generous benefits package.

Remote - Western New York (within approximately two hours of Buffalo) \n Work remotely while supporting commercial and industrial power distribution projects throughout Western New York. \n Whether you're currently a Project Manager, Project Engineer, Gear Estimator, Applications Engineer, Quotations Specialist, or Inside Sales professional, we'd like to speak with you. \n We're partnering with a highly respected electrical organization seeking an experienced professional to join its project management team. This position offers the flexibility to work remotely from anywhere within approximately two hours of Buffalo, making it an excellent opportunity for professionals in Rochester, Syracuse, the Finger Lakes, or the greater Buffalo area. \n If your background includes switchgear, switchboards, panelboards, transformers, or other power distribution equipment, let's have a confidential conversation. \n We're Looking For \n\n • Experience in project management, estimating, quotations, applications engineering, or inside sales within the electrical industry\n, • Ability to interpret electrical plans and specifications\n, • Strong communication, organizational, and customer service skills\n, • Experience working with contractors, engineers, manufacturers, or electrical distributors\n\n What You'll Find \n\n • Remote work from anywhere within approximately two hours of Buffalo\n, • A stable, well-established company with an outstanding reputation\n, • Competitive compensation, excellent benefits, and REAL long-term career growth\n\n Compensation: Base $75,000–$110,000 + bonus depending on experience. \n *Those residing outside of New York state will NOT be selected to interview.

Project Engineer \n \n Company Description \n \n My client, a large industrial equipment company that have customers in a wide variety of industries, are looking for a full-time Project Engineer, at their site north of Buffalo, NY. This is an onsite position that is responsible for the coordination and completion of assigned engineering projects including analyzing customer requirements for equipment selection. \n \n Remote work is possible occasionally. \n \n Role responsibilities: \n \n\n • Direct and manage project development from beginning to end.\n, • Aid in project administration from beginning to end.\n, • Complete/support completion of cost estimates for new opportunities and sales efforts.\n, • Analyze customer project requirements and communicate to engineering and production.\n, • Single point of accountability to oversee, direct and manage deliverables of projects to customer from end to end of project.\n, • Collaborate with vendors/suppliers on pricing, productivity ideas and material substitutions.\n, • Approve vendor/supplier deviations.\n, • Create Design Change Notice(s) (DCN) for customer driven scope changes to internal teams.\n, • Track project scope changes and communicate costs to customers for review/approval.\n, • Work with Syteline ERP System or other manufacturing software to create /load part numbers and material routings, update job information and pricing as requirements change.\n, • Facilitate internal Design Review meeting with Engineering & Designers to review compliance with customer requirements.\n, • Review & Share Product Improvement Trackers (PIT Sheets) to Engineering and Design Teams.\n, • Facilitate and Schedule Project Kickoff meetings with internal teams.\n, • Assesses cost effectiveness of products, projects or services.\n, • Meet with existing and potential customers.\n, • Writing and follow-up of non-conformity reports & MRRs where applicable.\n, • Represent the customer (point of customer) during design & fabrication of projects.\n\n \n Requirements \n \n\n • Associate's or Bachelor's degree in Engineering, Project Management or a related field.\n, • Several years experience in the field or a related area.\n, • Design skills, familiarity with CAD, NX or Inventor ideally.\n, • Able to travel to Canada to facilitate work on projects manufactured in that location.\n, • Awareness of manufacturing methods and procedures.\n, • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met.\n, • Able to work cooperatively with other project team members as well as customers.\n, • Awareness of manufacturing methods and procedures.\n, • Able to manage a number of projects at one time with frequent interruptions.\n\n \n \n This role is paying an excellent basic salary in addition to a generous benefits package.

Job Description About NECI NECI is an Emerson Impact Partner and provider of industrial automation and digital transformation solutions and services. We solve process, automation, and data integration challenges in therapeutics, energy, and manufacturing with a broad portfolio of product, project, and service capabilities. Our experienced team has a deep knowledge of people, process and systems and relentlessly seeks to drive the outcomes that empower our partners to advance the world. Join in our mission! The Role We are looking for an Application Engineer to own the full lifecycle of valve solutions for our customers from first conversation to final delivery. This is not a pure engineering role, and it is not a pure sales role. The best fit is someone who thrives in the space between technical problem solving, customer engagement, and commercial results. You will work closely with Account Managers and Order Management, bringing your valve expertise directly to customer conversations, and be the person customers trust to get it right. What You'll Do • Propose and sell valve solutions - including control, isolation, and safety relief valves - by listening to customer requirements and recommending the right configuration, sizing, and application approach, • Grow NECI's valve automation business by promoting our reputation as a total valve supplier for ball valves, butterfly valves, valve automation, and complete solutions across a range of industrial customers and process industries, • Achieve sales goals for new product initiatives by engaging in NECI and principal product launches, uncovering customer needs, and applying the latest technology offerings, • Provide technical support to customers through start-up, calibration, troubleshooting, and issue resolution and follow through until the problem is solved, • Coordinate on-time delivery by assessing customer needs, working with suppliers, and taking ownership when customer satisfaction is at risk, • Identify and develop new sales opportunities while maintaining accurate customer and opportunity data in our CRM platform, • Partner closely with Account Managers on account growth strategies and territory plans, • Contribute to NECI's quality management system through continuous improvement, corrective actions, and cross-functional collaboration, • Stay sharp by attending factory training, principal-based sessions, and professional development opportunities, • Keep the team informed of market conditions and competitive activity in the territory What You'll Bring • Bachelor's degree in Engineering Mechanical, Industrial, or Chemical preferred, • 0-5+ years of experience in a role involving valves, valve automation, process control, instrumentation, or related industrial technologies, • Hands-on familiarity with control valves, isolation valves, and/or safety relief valves including sizing, selection, and application, • Experience in a customer-facing role, even if your title was not "sales" what matters is that you have worked directly with customers to solve technical problems, • The ability to explain technical solutions clearly to both engineering and non-engineering audiences, • Strong follow-through - you take ownership and stay involved until the customer gets what they need, • A results-oriented mindset with genuine drive to grow a business alongside the customers you support, • Strong organizational skills, ability to work on multiple requests simultaneously and manage competing priorities Benefits • Competitive Medical, Dental & Vison Insurance, • Flexible Spending or Health Savings Accounts, • Unlimited Vacation Time Policy, • 10 Paid Holidays, • 12 Paid Weeks Birthing Parent Leave, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Pet Insurance, • Employee Referral Bonus, • Tuition Reimbursement, • Company Paid STD, LTD, and Life Insurance Compensation: This position offers a base salary range of $70,000 to $100,000, based on experience and qualifications. The role is also eligible for a variable compensation plan. The posted salary range represents a good faith estimate of the expected compensation for this role at the time of posting. Final compensation will be determined based on factors such as relevant experience, skills, qualifications, internal equity, and business needs. On-Site Requirements This position requires a full on-site presence 5 days per week during the first 4–6 months. Following that period, the role will be on-site four days per week, including Monday, Wednesday, and Thursday, with the fourth on-site day alternating between Tuesday or Friday depending on business needs. Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions: Please note that any third-party unsolicited resume submissions will immediately become the property of Stellix and its affiliates. Stellix and its affiliates will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note: Stellix and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.

Job DescriptionJob Requirements The Sales Engineer II will engage a designated portfolio of current and potential clients to demonstrate how Stark Equipment's Critical Power Division can tailor product and service solutions to meet both present and future facility infrastructure requirements. This role emphasizes providing design support, customizing product configurations, and assisting in establishing pricing strategies for power distribution equipment in new projects as well as existing critical power systems. Success in this position will be measured by meeting revenue and gross profit goals along with account management performance standards. Includes a car allowance and unlimited bonus opportunities based on relevant experience in power system sales. Work Experience • At least 5 years of industry (power distribution) experience required., • Technical understanding of Electrical Power systems required., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market., • Strong account management capabilities., • Minimal local travel expected., • Participation in annual training sessions and conferences held outside the region. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. Company DescriptionAt Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a full-time Mechanical Design Engineer at our Tonawanda, NY location. This is an onsite position that is involved with the development and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input that perform in an efficient and reliable manner while satisfying customer needs. Responsibilities • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor, • Have specific knowledge of project routings and elevate potential issues to supervisor, • Actively participate in project kick-off meetings, • Have a complete understanding of project specifications and customer expectations., • Read and interpret P&ID (Process and Instrumentation Diagrams), • Identify discrepancies or lack of information in available project documentation to supervisor, • Understand and adhere to product design standards and guidelines, • Select and source common mechanical components, • Develop complete definition of mechanical components for communication to vendor for purchasing, • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation, • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits, • Understand in-house fabrication and testing capabilities. Design products for manufacturability, • Utilize Syteline ERP as required throughout project, • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details, • Support production during fabrication and assembly phases of projects, • Identify Bill of Materials for product designs and select the proper components that meet the customer specifications, • Collect as-built information as required and track design updates to implement on future projects, • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance, • Manage multiple projects and balance requirements to keep all jobs on schedule, • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills, • Work with Project Engineers in a team environment to create conceptual designs to support sales and detailed designs as required Requirements: • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology from a 4-year accredited college or university, • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques, • Experience in complex custom equipment design, • Previous manufacturing floor and design exposure is a plus, • Two (2) years of fulltime verifiable experience in the field Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job Description Build the Future of Cooling – API is growing like never before as we enter into the refrigeration market, developing new technologies, building methodologies and inventing the equipment to do it. We’re looking for an Advanced Cooling Design Engineer to join our team of thermal transfer professionals who enjoy both the digital and physical work of getting things done. Help engineer the next generation of heat transfer technology powering AI, hyperscale data centers, advanced manufacturing, energy infrastructure, and the world’s most demanding thermal applications. We are looking for a highly driven, creative engineer ready to help drive explosive growth within one of the fastest evolving sectors in industrial technology. This is not a maintenance engineering role, this is an opportunity to design, innovate, and build the future alongside a world-class global engineering team. What We Offer You: • Opportunity to learn from and contribute to a premier, global engineering team!, • Be part of leading-edge technology for the heat transfer industry., • Ability to impact customers across multiple industries., • Full health & welfare benefits, 401(k), PTO, and developmental opportunities!, • Opportunity to travel 15% to API locations, clients and trade shows., • Salary Range: $95,000/year - $115,000/year What You Will Do: The Advanced Cooling Design Engineer will support our growing sales and design efforts by creating and managing designs for new product development projects, functioning as the dedicated CAD operator of the data center team. This position requires an individual with an expert level knowledge of SolidWorks, a high level of creativity, design for manufacturability knowledge, and excellent time management and communication skills. • Creation of new parts in the ERP system, manufacturing Bill Of Materials (BOM), and 3D modeling / 2D prints for production and customer approval., • Develop/execute the application engineering technology simulation into the heat exchanger design., • Work closely with both Application Engineering and Manufacturing Engineering to develop the next generation of cooling equipment., • Develop and manage product assemblies with integration of heat exchanger designs as required., • Assist the Project Engineer and Applications Engineer in detailing the standard costs of product designs., • Support manufacturing – fix, update and maintain BOMs, fix part info & drawings, provide drawings & answer questions as needed., • Author and distribute technical documents as required., • Support the team with validating each other’s output, analysis of results, and other efforts to produce world-class products., • Collaborate with internal teams to construct project scope and determine costs and manufacturing feasibility., • Collaborate on special projects with project team., • Contribute to setting project team priorities and provide technical leadership., • Stay updated on industry trends and advancements in heat exchanger technology., • Collect and share technology/application/market/competitor information. What You Bring: • Bachelor of Science in Mechanical Engineering - heat transfer is specialization preferred or 10 years of proven industry experience in lieu of degree, • Expert level knowledge and operation of SolidWorks CAD software., • Ability to set up & develop smart, self-generating automated 3D models and assemblies in Solidworks., • Setup and use automated features for 2D print generation., • Product knowledge and/or design experience of Aluminum bar & plate, shell & tube, plate heat exchangers preferred, with a specialization on refrigeration applications, • New product development processes and procedure experience., • Up to date on AI trends in 3D modeling and able to implement AI into modeling and assemblies preferred., • Knowledge of the data center industry is preferred., • Collaborative, analytical, and solution focused., • Experience in a Lean Manufacturing environment desired. APICZ

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a full-time Project Engineer at our Tonawanda NY office. This is an onsite position that is responsible for providing product, application Engineering, sales, and project management support to customers and sales representatives while interfacing with a team of technical Sales Managers. The schedule for this role will be 8am-4:30pm Monday through Friday, with the opportunity to work remotely on Fridays once fully trained. Job responsibilities: • Review assigned inquiries, including customer documentation / specifications, to support the definition of appropriate products to offer, • Perform engineering and product sizing calculations to specify equipment, • Complete/support completion of cost estimates and technical proposals to inquiries for Sales team review and submittal to the customer and/or associated sales representatives., • Analyze customer project requirements and communicate to engineering, production and other Operations groups as needed; Direct and manage project execution from beginning to end supporting both internal and external customers;, • Support the Order Entry Administrator with the creation of new customer orders and job orders, • Act as a single point of accountability to oversee, direct, and manage deliverables of projects to customers from inquiry through warranty of project;, • Collaborate with vendors/suppliers on pricing, lead times and productivity ideas to support customer solutions;, • Create Design Change Notice(s) (DCN) for customer driven scope changes to internal teams when required;, • Track project scope changes and communicate updated pricing to customers for review/approval in accordance with the CPEG Buffalo protocol, • Support the definition of materials and define BOM requirements for the BOM coordinator, for creation and or loading of items into the ERP system, • Act as liaison between CPEG Buffalo customers and all departments within the CPEG Organization;, • Support internal design review meeting with Engineering & Design teams to review compliance with customer requirements and product realization, • Facilitate and Schedule Project Kickoff meetings with internal teams;, • Meet with existing and potential customers, and support trade show efforts (Travel up to 20%), • Supporting the Customer Service team, where applicable;, • Writing and follow-up of various non-conformity reports where applicable;, • Support customer and 3rd party witness points / inspections at CPEG facilities (Travel up to 5%);, • Participate in business development and marketing activities (eg, contact existing customers and new prospects to discuss new products and projects)., • Comply with all company policies, procedures, and company/customer confidentiality agreements., • Create, maintain, and improve relationships with customers, sales managers, and outside sales representatives.Requirements:, • Bachelor of Science in Engineering degree (preferably in Mechanical Engineering or Chemical Engineering)., • 2-3 years of experience in industrial or manufacturing business (preferred), • Awareness of manufacturing methods and procedures., • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met., • Have excellent communication skills, both written and verbal., • Ability to work cooperatively with other project team members as well as customers across a wide range of positions and talents;, • Intermediate to advanced proficiency level in Microsoft Word, Excel and Outlook; as well as Adobe Acrobat and Windows., • Able to carry out detailed written or oral instructions., • Able to understand proper handling of all paperwork required in department, including reporting of time, • Able to manage multiple concurrent projects and priorities with frequent interruptions, • Able to function and concentrate in a busy, noisy environment, • Ability to travel to Canada to facilitate work on projects manufactured in that location, • Technical aptitude – You understand equipment specifications and process applications and can understand equipment assembly logistics and material and labor cost contribution to overall equipment cost estimates and engineering principles. Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job Description Allient Inc. is in growth mode and currently seeking an Applications Engineer to join our team at our Corporate Headquarters in Buffalo, New York! The Applications Engineer conducts and engages with customers on a defined set of applications and solutions to determine requirements related to some manufactured products including motors, drives, gearboxes and other Allient Inc. products and systems. This individual will serve as a liaison between Allient Inc. and its customers, distributors, and reps. Apply now! Responsibilities: • Promotes the value of Allied Motion and Allient Inc. products and services to the customers within the specified geographic territory with the goal of maximizing sales revenue growth and market penetration., • Issue customer quotes and tracks the receipt of new orders, often acts as the day-to-day point of contact., • Develops appropriate sales volume, pricing and standard margin forecasts and is able to capitalize on/compensate for market changes via price changes or share gain., • Serves as a liaison to obtain and provide engineering specifications and related information and expedite material requisitions and production work orders., • Provides technical assistance to interpret, analyze and resolve procurement, manufacturing, installation and field operating problems., • Oversees product installation and trial operations and analyzes and resolves operating and other field problems related to customer installations., • Prepares reports, maintains records, files and a references library incidental to the application of products. Keeps informed of new developments in relation to engineering fields as they relate to the division’s products., • Trains in-house to gain a thorough understanding of Allied Motion and Allient Inc. products, applications, and specifications., • Other duties and/or responsibilities as assigned. Minimum Qualifications: • Bachelor’s degree in Engineering, preferably Mechanical or Electrical., • 3 – 8 years of work and/or intern/co-op experience with technical, manufactured products and systems., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Excellent communication skills with the ability to influence others at all levels, • Solid computer skills include MS Office, engineering design software such as Solidworks, MatLab, Altium, etc. Work Environment: • Mostly office-based but may visit the production floor or development lab for observations or conversation., • May be required to operate a computer and/or other office devices., • Occasionally may have to lift and/or transport items weighing between 10 and 40 pounds., • This role requires some travel. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit www.Allient.com Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training

Job Description About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards, • Must have a valid driver’s license with a clean driving record Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required., • Perform essential job functions using proper techniques that may include lifting, carrying, pushing, and pulling tools, equipment, and materials., • Lift and carry items weighing up to 50 pounds, with or without reasonable accommodation., • Engage in frequent standing, walking, bending, stooping, kneeling, crouching, and reaching during field assignments., • Work in a variety of field environments, including confined spaces, uneven surfaces, and varying weather conditions., • Follow all company safety policies and training requirements, including the use of personal protective equipment (PPE)., • Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis., • Designated as Authorized Person for LOTO. Travel: • 50% Work Location and Status: • Contract role, Hybrid role based out of the NY, MA, or NC areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description Job Posting for Applications Engineer API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Engineering Team continues to be one of the best in the industry. If you like to solve problems, work with customers and want to be part of a new API, we'd love to talk to you about our Applications Engineer position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10-minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. https://surveys.cultureindex.com/s/7Y0awCvsZZ/91889 What We Offer You: • Opportunity to learn from and contribute to a premier, global engineering team!, • Be part of leading-edge technology for the heat transfer industry, • Ability to impact customers across multiple industries, • Full health & welfare benefits, 401(k), PTO, and developmental opportunities!, • Salary: $55,000-$80,000 annually What You Will Do: The Applications Engineer will work collaboratively with both internal teams and external channel partners to provide industry leading customer experience. The Applications Engineer will be involved in all aspect of the sales process from initial inquiry through order execution. As a critical member of the team, your primary areas of responsibility will include: • Work collaboratively on solutions with customers and markets including, but not limited to, Process & Industrial, Compressor & Dryer, Food & Beverage, Pharmaceutical, Dairy and HVAC and Refrigeration markets, • Utilize API software, vendor material quotes and pricing guidelines for sizing, selection, cost estimating and market pricing, • Develop and maintain the heat transfer expertise necessary to advise and train sales agents, partners and customers on the thermal and mechanical aspects of heat exchangers, • Generate cost estimates, quotations and perform the necessary follow up activities to facilitate the award of new business, • Work closely with internal departments throughout the sales cycle to deliver an exceptional customer experience, • As appropriate, provide feedback to be used for initiating product, process and/or marketing improvements., • Review purchase orders and resolve discrepancies to thoroughly and accurately process orders, • Utilize the ERP system to process orders, • Meet and exceed department objectives and key performance indicators (KPIs), • Other duties as assigned What You Bring: • Bachelor’s degree in mechanical/chemical engineering, or appropriate, demonstrable experience in Heat Transfer Applications Engineering., • Learning aptitude to familiarize yourself with our customers, products, processes and systems, • Self-motivated individual who seeks solutions rather than problems, • Excellent time management and communication skills, • Experience in Heat Exchanger Industry is preferred INDZ

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Energy is seeking a Sales Engineer with a Mechanical Engineering background to serve as the technical front line for new business opportunities. This role sits within the Business Development team and acts as the primary technical owner during project intake, scoping, feasibility evaluation, and pricing development. This individual functions as a pre-sales engineer allocated to BD, bridging customer requirements, internal engineering teams, and commercial strategy to ensure new projects are accurately scoped, technically viable, and competitively priced. Responsibilities Project Intake & Technical Scoping Lead technical intake for new business opportunities, serving as the primary engineering point of contact for BD. Facilitate kickoff meetings for new projects, ensuring alignment on scope, assumptions, risks, and delivery requirements. Review customer drawings, specifications, and requirements to assess feasibility, complexity, and risk. Document and communicate estimating assumptions, technical clarifications, exclusions, and open items required from customers. Partner with NPI and Engineering teams to evaluate prototype concepts, change requests, and early production feasibility. Identify technical risks, cost drivers, and manufacturability considerations early in the sales cycle. Proposal Development & Pricing Support Develop clear, structured cost summaries and supporting documentation for new project pricing. Support Business Development in packaging final proposals, ensuring technical completeness and commercial accuracy. Translate engineering requirements into pricing inputs aligned with GTI’s manufacturing capabilities. Maintain and continuously improve standardized templates, tools, and workflows used for estimating and proposal development. Ensure scope clarity between customer requirements and internal deliverables prior to contract award. Cross-Functional Collaboration Act as a liaison between Business Development, Engineering, Operations, Supply Chain, and Quality during the pre-award phase. Support internal handoff from sales to execution teams following project award to ensure scope continuity. Contribute to lessons learned and continuous improvement initiatives related to estimating accuracy and project scoping. Requirements Required Qualifications Bachelor’s degree in Mechanical Engineering or a closely related engineering discipline. 3+ years of experience in mechanical engineering, manufacturing engineering, applications engineering, or technical pre-sales. Strong ability to interpret technical drawings, specifications, and customer requirements. Experience working cross-functionally with engineering, operations, and commercial teams. Excellent written and verbal communication skills with the ability to explain technical concepts to non-technical stakeholders. Proficiency in Microsoft Excel and standard engineering documentation tools. Preferred Qualifications Experience supporting sales, estimating, or proposal development in a manufacturing or fabrication environment. Exposure to modular construction, industrial fabrication, or engineered-to-order products. Familiarity with NPI processes, cost modeling, or early-phase project feasibility analysis. Experience standardizing processes, templates, or technical workflows. Benefits and Perks GTI Fabrication offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Allient Inc. is in growth mode and currently seeking a Staff Systems Engineer to join our team at our corporate innovation center and headquarters located in Buffalo, New York! The Systems Staff Engineer leads system-level engineering for customer applications, working closely with leadership, sales, engineering teams, suppliers, and customers. This role supports major multi-site projects built around Allient’s core technologies: Motion, Control, Power, and Lightweighting. Apply now! Responsibilities: • Lead complex system design & analysis across electrical, mechanical, software, actuation, and composite technologies., • Define system architecture from customer requirements and applicable standards., • Manage requirements, including subsystem definitions, derived requirements, tolerances, and traceability., • Use modeling and simulation to verify performance, reliability, safety, and risk mitigation., • Create and manage test plans, procedures, fixtures, and tooling globally., • Perform subsystem testing and support integration into customer vehicles or applications., • Evaluate new and modified product designs to ensure performance meets specifications., • Present technical information to support strategic, multi-site planning., • Review and critique design work from others and promote best practices., • Collaborate directly with customers and internal teams on requirements, project updates, and test results., • Contribute to standard process and procedure development., • Mentor engineers at various levels., • Serve as a technology expert and help guide innovation for products and processes., • Support proposals, including technical definitions, diagrams, and compliance documentation., • Operate with a high degree of independence; only major deliverables require senior review., • Work across multiple projects and locations simultaneously., • Some limited travel may be required (20% typical), • Other duties as needed. Minimum Qualifications: • Bachelor’s degree in electrical, mechanical, or aerospace engineering + 11 years’ experience, or Master’s degree + 9 years’ experience., • Experience with actuation systems (motors, gearing, ball screws, electronics, software)., • Extensive experience using MATLAB and Simscape for dynamic, thermal, and power-flow analysis., • Knowledge of composites/lightweighting preferred., • Experience with military/defense programs or government contracting preferred., • Strong ability to interpret and develop technical instructions, diagrams, and abstract concepts., • Proven technical expertise in one or more engineering disciplines. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit www.Allient.com Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description We have an immediate opening for an experienced Manufacturing Engineer to support the sales and manufacturing functions. This position will report to the Engineering Manager and will handle a variety of technical duties, which include: Estimating function: • Review the requests for quote (RFQ) and prepare detailed estimate sheets to include time standards, material specifications, outside vendor services and associated costs, tooling, and any notes and/or exceptions to the RFQ., • Maintain and develop inside sales relationships with customers to maximize sales potential through proactive quote follow-up to improve sales. Process Engineering function: • Responsible for process engineering functions which includes preparation of all necessary information required to run any job including: master files, blueprints, specifying material, any outside service vendors, tooling requirements, accurate machine standards, clarification of any notes and/or exceptions, and all necessary customer contact required to complete the job., • Lead/participate in Kaizen events and use Lean manufacturing techniques as required to make processes more efficient., • Develop and implement optimal, cost-effective manufacturing methods on new and existing products., • Revise methods suggested by new equipment, process changes, and special requirements. Make recommendations to improve manufacturing methods for cost-reduction, quality improvement and efficiency., • Create a work order establishing the initial job schedule. Consults with manufacturing to develop accurate lead time and shipping schedules., • Order entry and maintenance of customer record files in accordance with established policies and procedures., • Calculate materials for new orders and review any material certifications and if acceptable, pass them on to Quality Control for filing with the job., • Perform related duties as assigned, within the scope of the Engineering/Purchasing Department. The successful candidate will be proficient in AutoCAD, Microsoft Office applications (Word, Excel, Outlook) and highly organized with strong attention to detail. Experience in Solidworks would be helpful. Excellent communication skills and good problem solving skills required. A Bachelors Degree in Manufacturing, Industrial or Mechanical Engineering is preferred but not required. Candidate should have 4-6 years of manufacturing experience.

Job DescriptionJob Title: Project Engineer / Project ManagerLocation: Tonawanda, NYHire Type: Direct HirePay Range: $65,000 - $95,000 +bonus potentialWork Type: Full-timeWork Model: Onsite – hybrid after training, 1 day/weekWork Schedule: Monday – Friday, 8am – 5pm Recruiter Contact: Samantha Marranca, smarranca@imaginestaffing.netNature & Scope:Positional OverviewThe Imagine Group is recruiting for a Project Engineer / Manager on behalf of our client, a leading global provider of custom engineered bulk material processing and handling solutions with operations that include manufacturing and testing facilities serving diverse industries such as chemicals, food, mining, and energy storage in Tonawanda, NY. In this role, you will be responsible for managing custom-engineered equipment projects from initial design through manufacturing and final delivery, ensuring alignment with technical specifications, budget, and schedule requirements. You will collaborate closely with engineering, production, procurement, and customers to support design reviews, resolve technical challenges, and drive successful project execution.Role & Responsibility:Tasks That Will Lead to Your Success • Learn the product line and standards., • Determine the required design parameters and specific needs for a given project through reading the customer specifications and/or through customer engagement., • Establish the proper equipment selection, proper filter media, system design and ancillary equipment., • Generate the proposal to the customer, including scope of work, design conditions, deliverables, pricing, technical and commercial exceptions, schedule, etc., • Serve as Project Engineer/Project Manager for your proposals that become contracts., • Provide back-up support to Sales as needed., • Build relationships with representatives, clients, and prospects.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor’s degree in Mechanical Engineering or Chemical Engineering. Candidates with relevant work experience who are in the process of pursuing an Engineering degree will be considered., • Experience quoting capital equipment, preferably air pollution control equipment., • Technical competency with the ability to understand industrial equipment and process design., • Strong attention to detail and ability to organize and prioritize cross-functional projects., • Proficiency in MS Office, especially Excel and Word., • Excellent communication skills and ability to interface with multiple teams and individuals., • Dust collection experience is a plus.

Job DescriptionJob Requirements The Sales Engineer is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align Siemens product and service offerings with current and future facility infrastructure needs. This position will focus on providing design assistance, configure product offerings and help set pricing strategies for power distribution equipment on new applications and existing facility critical power equipment. Successful performance will be directly related to achieving revenue & gross profit targets & account management attainment benchmarks. Includes a car allowance and unlimited bonus opportunities based on relevant experience in power system sales. Work Experience • 5 years of industry (power distribution) experience preferred., • Technical understanding of Electrical Power systems required., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market., • Strong account management capabilities., • Minimal local travel expected., • Participation in annual training sessions and conferences held outside the region. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. Company DescriptionAt Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Job Description About NECI NECI is an Emerson Impact Partner and provider of industrial automation and digital transformation solutions and services. We solve process, automation, and data integration challenges in therapeutics, energy, and manufacturing with a broad portfolio of product, project, and service capabilities. Our experienced team has a deep knowledge of people, process and systems and relentlessly seeks to drive the outcomes that empower our partners to advance the world. Join in our mission! The Role We are looking for an Application Engineer to own the full lifecycle of valve solutions for our customers from first conversation to final delivery. This is not a pure engineering role and it is not a pure sales role. The best fit is someone who thrives in the space between technical problem solving, customer engagement, and commercial results. You will work closely with Account Managers and Order Management, bringing your valve expertise directly to customer conversations, and be the person customers trust to get it right. What You'll Do • Propose and sell valve solutions - including control, isolation, and safety relief valves - by listening to customer requirements and recommending the right configuration, sizing, and application approach, • Grow NECI's valve automation business by promoting our reputation as a total valve supplier for ball valves, butterfly valves, valve automation, and complete solutions across a range of industrial customers and process industries, • Achieve sales goals for new product initiatives by engaging in NECI and principal product launches, uncovering customer needs, and applying the latest technology offerings, • Provide technical support to customers through start-up, calibration, troubleshooting, and issue resolution and follow through until the problem is solved, • Coordinate on-time delivery by assessing customer needs, working with suppliers, and taking ownership when customer satisfaction is at risk, • Identify and develop new sales opportunities while maintaining accurate customer and opportunity data in our CRM platform, • Partner closely with Account Managers on account growth strategies and territory plans, • Contribute to NECI's quality management system through continuous improvement, corrective actions, and cross-functional collaboration, • Stay sharp by attending factory training, principal-based sessions, and professional development opportunities, • Keep the team informed of market conditions and competitive activity in the territory What You'll Bring • Bachelor's degree in Engineering Mechanical, Industrial, or Chemical preferred, • 0-2 years of experience in a role involving valves, valve automation, process control, instrumentation, or related industrial technologies, • Hands-on familiarity with control valves, isolation valves, and/or safety relief valves including sizing, selection, and application, • Experience in a customer-facing role, even if your title was not "sales" what matters is that you have worked directly with customers to solve technical problems, • The ability to explain technical solutions clearly to both engineering and non-engineering audiences, • Strong follow-through - you take ownership and stay involved until the customer gets what they need, • A results-oriented mindset with genuine drive to grow a business alongside the customers you support, • Strong organizational skills, ability to work on multiple requests simultaneously and manage competing priorities Benefits • Competitive Medical, Dental & Vison Insurance, • Flexible Spending or Health Savings Accounts, • Unlimited Vacation Time Policy, • 10 Paid Holidays, • 12 Paid Weeks Birthing Parent Leave, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Pet Insurance, • Employee Referral Bonus, • Tuition Reimbursement, • Company Paid STD, LTD, and Life Insurance Compensation: This position offers a base salary range of $70,000 to $78,000, based on experience and qualifications. The role is also eligible for a variable compensation plan. The posted salary range represents a good faith estimate of the expected compensation for this role at the time of posting. Final compensation will be determined based on factors such as relevant experience, skills, qualifications, internal equity, and business needs. On-Site Requirements This position requires a full on-site presence 5 days per week during the first 4–6 months. Following that period, the role will be on-site four days per week, including Monday, Wednesday, and Thursday, with the fourth on-site day alternating between Tuesday or Friday depending on business needs. Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions: Please note that any third-party unsolicited resume submissions will immediately become the property of Stellix and its affiliates. Stellix and its affiliates will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note: Stellix and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.

Job DescriptionAccount Executive - North America Hybrid (3 days onsite, 2 days remote) role in Buffalo, NY. To get the best candidate experience, please consider applying for a maximum of 3 applications within 12 months to ensure you are not duplicating efforts. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or assume sponsorship responsibilities for employment visas at this time. About OdooOdoo is an open-source enterprise resource planning (ERP) platform that helps companies manage and streamline their operations through a single, integrated system. Our modular suite of business applications—covering everything from accounting and inventory to CRM and project management—works together seamlessly to support efficiency and growth. About the job:Odoo offers an open-source ERP SaaS platform, and our Direct Sales team is central to expanding our customer base and market presence. We're hiring Account Executives to connect businesses with Odoo’s all-in-one suite of integrated applications. In this role, you’ll work directly with companies to understand their operations and propose tailored software solutions that streamline workflows. This is a technical sales position ideal for individuals who thrive at the intersection of software and business strategy. You’ll develop deep product knowledge, work across a variety of industries, and play a key role in driving growth across multiple software verticals. We’re looking for proactive, curious professionals who are excited to deliver value and close deals. Responsibilities: • Work with other Account Executives to spearhead the growth and adoption of Odoo SaaS solutions., • Full sales cycle, from the inbound conversion through an initial close, and then post-sale account management for upselling., • Be a solution engineer who analyzes all aspects of prospects' business operations and builds out a tailored Odoo implementation package to demo., • Sell a diverse SaaS offering to almost any industry in the North American region., • Proactively look for opportunities to improve and optimize the sales process., • Hit revenue targets (quota carrying role)., • Participate in periodic team reviews and updates on business progress, best practice sharing, etc. Qualifications and Requirements: • Bachelor's Degree preferred or an equivalent combination of education and experience., • 1+ years of internship experience., • Understanding of business operations., • Knowledge landscape of software providers in different verticals., • Demonstrated ability to learn, think on your feet, and communicate effectively., • Results-oriented, analytical, self-motivated, and a "hands-on" person with a proven ability to meet objectives and targets., • Creative, outside-the-box thinker, and strategist., • Ability to perform well in a highly dynamic, rapidly changing environment. Compensation and Perks: • Healthcare, Dental, Vision, Life Insurance, Flexible Spending Account, Health Savings Account, 401K Matching, and Commuter Benefits., • PTO (Paid-time-off), paid sick days, and paid holidays., • Employee Assistance Program: 3 X 1-hour telehealth calls with certified mental health professionals., • Evolve in a nice working atmosphere with a passionate, growing team!, • Snacks, fruit, and coffee/drinks on tap!, • Chef-prepared lunches - snacks, fruit, and coffee/drinks on tap!, • Company-sponsored events for groups of 6+ employees. The estimated annual compensation range for this role is $69,000-$93,000 OTE (on-target earnings), with a base salary range of $45,000-$70,000. Please note that actual salaries may vary within, above, or below this range based on factors such as education, training, experience, professional achievement, business needs, and location.

Job Description Customer Service Representative Motion Concepts a medical device manufacturer is looking for a customer service professional with solid experience to support the sales process from quoting all the way through to shipping the final product. Requirements of the position • Quotations – receiving, processing and tracking of RFQ’s (requests for quotation) and coordinating with the Customer in providing product knowledge., • Co-coordinating customer issues such as order tracking, return processing, complaints and service parts and upgrading products., • Processing of orders all the way through to invoicing, including shipping documentation, for North American and oversea shipment., • Prepare and update various sales and tracking spreadsheets., • Perform general administration tasks and support other departments if applicable Qualifications • College diploma in business related discipline preferred, • Previous CSR/Inside sales experience – at least two years, • Familiar with ERP system Navison is an asset, • Excellent communication skills, • Extensive experience using MS office software – primarily with Excel intermediate to advanced, • Must be able to work on a variety of tasks simultaneously with frequent interruptions and with attention to timelines and details., • Enjoys working with others and being part of a team. Company DescriptionMotion Concepts is a leading manufacturer of complex rehabilitation seating and mobility solutions, serving clients across North America. We design, engineer, and build highly customized power-chair seating systems with a focus on quality, safety, and innovation. Our team works closely with clinicians and distributors to deliver products that improve comfort, independence, and quality of life for individuals with mobility challenges.Motion Concepts is a leading manufacturer of complex rehabilitation seating and mobility solutions, serving clients across North America. We design, engineer, and build highly customized power-chair seating systems with a focus on quality, safety, and innovation. Our team works closely with clinicians and distributors to deliver products that improve comfort, independence, and quality of life for individuals with mobility challenges.

Shimadzu Scientific Instruments is seeking a highly motivated Field Sales Engineer to join our team! In this field-based role, you will promote and grow sales of Shimadzu's premier market-leading analytical instrumentation portfolio. As a consultative technical sales expert, you will take ownership of a defined territory and associated product lines while strategically developing the territory for sustainable year-over-year growth. The Field Sales Engineer will pursue new business opportunities, develop strategic account plans, expand relationships within key accounts, and identify opportunities to penetrate new and differentiating accounts. Success in this role requires strong technical aptitude, disciplined territory management, and regular hands-on engagement with customers. This is not a remote work-from-home position. While some administrative responsibilities may be handled from home or from the regional office in Marlborough, MA, this is a true field sales role requiring frequent customer site visits throughout the assigned territory. Job functions include, but are not limited to: • Sales & Business Development: Identify and prioritize new client opportunities; manage and grow existing accounts., • Develop and execute strategic sales plans to achieve revenue goals., • Maintain a robust pipeline of qualified prospects., • Customer Engagement: Provide consultative support and product guidance to customers., • Deliver technical presentations and represent Shimadzu at trade shows and industry events., • Leverage internal and external resources to meet customer needs., • Collaboration & Teamwork: Coordinate with field application specialists and lab teams to deliver technical solutions., • Operate in a collaborative, team-based sales environment., • Share account insights and sales leads across functional teams., • Sales Operations: Generate quotes, negotiate terms, and manage the closing process., • Ensure compliance with procurement processes and purchasing protocols. Education and qualifications: • Bachelor's degree in a life science discipline; Chemistry strongly preferred, • Minimum of 3 years of successful sales experience with relevant analytical instruments, including:, • Chromatography (GC and HPLC), • Mass Spectrometry (GCMS and LCMS Single Quadrupoles), • Spectroscopy (atomic and molecular) or similar technologies, • Strong technical aptitude with demonstrated ability to understand instrumentation, customer applications and workflows, • Proven track record of achieving or exceeding sales targets, • Excellent verbal and written communication, presentation and negotiation skills, • Strong analytical thinking and strategic territory planning capabilities, • Proficient in the use of CRM systems for pipeline management, forecasting, and reporting, • Willingness and ability to travel to customer sites approximately 80% of the time, • Valid driver's license required

The Lead Project Manager is responsible for leading the planning, coordination, execution, and delivery of complex engineer-to-order manufacturing projects and associated contracts.This role serves as the primary point of accountability for project success, ensuring alignment across Sales, Engineeri

Year 1 Earning Potential: $65,000+ Year 2 Earning Potential: $150,000+ Top Performers: Exceed $1M in annual sales. What You Bring: Sales Acumen: Experience in negotiating and closing; familiarity with digital and print advertising is a plus.

This is not a traditional software engineering role. Your frontend engineering knowledge is what matters. Create high-quality technical documentation and structured examples based on real-world frontend engineering scenarios.

Faces, fills, and recovers products to meet sales floor standards. Retail Sales Associate Full Time. Pet Associate (Retail Sales Associate).

Track marketplace promotions, seasonal opportunities, and key events such as Prime Day, holiday sales, TikTok campaigns, and Walmart promotional periods. Identify risks early and follow up quickly to avoid lost sales, listing issues, or account delays. Look for ways to improve sales, listings, opera

PhD Engineer (Electrical, Mechanical, Chemical). PhD-level Engineers in Electrical, Mechanical, or Chemical disciplines to contribute to a high-impact customer project. Deliver authoritative written responses to complex engineering prompts in your area of expertise.

Set up personal sales expectations with immediate supervisor and prepare to meet sales goals. Responsible for all areas of sales within a defined territory, including selling, marketing, customer service, administration, production, and training. Prepare and provide proposals to clients utilizing sa

Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and solve c

Jennifer Miller Boutique Jewelry Sales Associate. We are looking for summer sales associates for our Southampton location. The sales associate is a valuable member of the Jennifer Miller team.

Smart Home Integration offers a tremendous growth opportunity for a variety of skill sets including sales, technician, project management, operations and more. Smart Home Integrators offer careers in sales, operations, marketing, project management, finance, merchandising, purchasing, technical trad

At Groundworks, North America's leader in foundation solutions, our outside sales representatives don't just sell a servicethey deliver real solutions that protect what matters most to our customers: their homes. Manage and grow your sales territory. Maintain relationships with customers while track

As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. Experience in insurance sales or account management preferred. Proven track record of meeting sales targets.

Support with development and execution of strategies to expand MD&A's Parts Division sales footprint across key domestic and international regions, aiming to achieve predetermined sales and order targets, develop, and close business opportunities within the Industrial, Gas, and Steam Turbine/Generat

Job Opportunity At Stewart's Shops.Stewart's Shops is a fast growing convenience store chain in New York and Vermont with friendly store associates and great customers! We are looking for full-time shop partners with flexible schedules to provide excellent customer service in our shops.When we say p

The Strategic Account Manager fosters and maintains relationships with new and existing business accounts by delivering excellent account management, providing innovative solutions to solve unique business needs, and identifying service enhancements for customers that increases customer loyalty, ret

As part of a fast-paced, dynamic sales team, you will develop relationships with our customers and ensure that each customer's needs are met in a quick and efficient manner. Whether you have previous sales experience OR customer service experience, this is a great opportunity to pursue a rewarding c

As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Route Sales Representatives are critical to our success at Fri

Collaborate with sales and internal teams to ensure successful service delivery and support strategic marketing initiatives. Maintain accurate and organized client records, including sales activity, communications, and project details.

Consult with electrical engineers and other engineering staff to evaluate interface between hardware and software and operational performance requirements of the overall system. Job Title: Lead, Software Engineering - DSP. The L3Harris Communications and Mission Critical Communications sector is see

Sales Confidence: 2+ years of retail or service sales (membership sales experience is a huge plus). Sales & Service Specialist Elements Massage Clifton Park. Elements Massage Clifton Park is seeking a confident, focused, and friendly Sales Specialist who takes complete ownership of the client exper

A mechanical industry leader with over 100 years of experience as one of the largest contractors in the Northeast, they are known for supplying turn-key solutions for virtually any HVAC refrigeration, plumbing, metal fabrication, or specialty mechanical project.Primarily serving the healthcare, data

A degree in Construction Management, Civil Engineering, or a related field is preferred.

Specialist engineers are technical contributors on a multidisciplinary engineering team helping create the best overall system design. Bachelor's Degree in Mechanical Engineering or other related engineering or science degree and minimum 4 years of prior relevant experience. Experience as a lead eng

Senior Sales Representative Job Duties: Enhances sales staff accomplishments and competence by planning delivery of solutions; answering technical and procedural questions for less experienced team members; teaching impr