Trabajos welder en Riverside, CaliforniaCrear alertas

Job Description Cryogenic Trailer / Tank Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for tanker and trailer mechanics with cryogenic experience! Shift Hours: Monday through Friday, 8:00 AM to 5:00 PM. This position is for our Bloomington, CA branch at 225 West Slover Ave. Pay Range: $22.00 to $42.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a cryogenic trailer., • Trailer suspension installation and repair, • Strong ABS maintenance skills, • Tank service and repair Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for diesel mechanics who are interested in working on trucks and trailers! Shift Hours: Monday through Friday, 8:00 AM to 5:00 PM. This position is for our Bloomington, CA branch at 225 West Slover Ave. Pay Range: $22.00 to $42.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a diesel tractor / truck / semi, • Suspension repair experience, • Experience with air brake systems and repairs, • Experience with oil changes, preventative maintenance, starters, wheel seals, and all bolt on components, • Willing and able to assist with trailer work when needed Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job DescriptionTrailer Mechanic / Registered Tank Inspector Company: Depot Connect International (DCI) Industry: Tank Trailer & ISO Tank Container Services Location: Bloomington, CA Pay Range: $22.00 – $42.00 per hour (Starting rate based on experience) Build a Career That Keeps America Moving Depot Connect International (DCI) is a global leader in Tank/ISO Tank Container Services and Tank Trailer Parts. Formed by the combined expertise of industry leaders Quala, Boasso Global, and PSC, DCI operates over 120 locations worldwide with more than 3,500 employees delivering mission-critical transportation services. We are currently seeking DOT inspection-certified Trailer Mechanics with specialized tank trailer repair experience who take pride in their craft and understand the importance of safety, precision, and reliability. If you enjoy diagnosing problems, solving complex mechanical challenges, and working on heavy-duty equipment that truly matters, this is the opportunity to grow your career within a stable, expanding global company. Role Overview The Trailer Mechanic / Registered Inspector is responsible for inspecting, diagnosing, repairing, and maintaining a diverse fleet of specialized tank trailers in strict compliance with DOT and HM183 (hazmat) regulations. This role requires strong mechanical aptitude, advanced troubleshooting ability, and an absolute commitment to safety and quality workmanship. Key Responsibilities DOT & HM183 Inspections: Conduct rigorous, compliant inspections on various cargo tank specifications, including low-pressure liquid and chemical trailers (MC 306/406, MC 307/407) and high-pressure/cryogenic gas trailers (MC 331, MC 338). Diagnostics & Repairs: Diagnose failures and perform high-quality repairs on mechanical, electrical, structural, and tank piping/valve systems. Brakes & Suspension: Inspect, service, install, and repair trailer suspension systems and air brake systems. Compliance & Documentation: Ensure all structural repairs and testing align perfectly with federal hazmat safety standards; maintain meticulously detailed inspection logs. Safety & Environment: Follow all OSHA and confined space safety procedures while maintaining a clean, organized shop floor. Welding (Plus): TIG welding experience (aluminum, stainless steel, or carbon steel) is highly preferred to align with our shop's ASME "R" Stamp capabilities. Qualifications DOT Inspection Certification Required (Meets FMCSA criteria for a Registered Cargo Tank Inspector). Experience: 2+ years of dedicated tank trailer repair and testing experience preferred (ideal candidate has 3–5 years). Technical Knowledge: Deep familiarity with DOT HM183 cargo tank testing requirements (V, I, L, P, T, K testing methodologies). System Mechanics: Proven experience troubleshooting and repairing heavy-duty air brake systems, suspensions, and industrial piping. Quality Focus: Ability to read, understand, and execute repairs according to technical manuals, blue-prints, and federal compliance standards. Physical Requirements Regularly lift and/or move up to 50 lbs (and occasionally up to 75 lbs with assistance). Ability to safely enter, exit, and work inside tank trailer manholes (Confined Space environment). Ability to stand, bend, kneel, and work in physically demanding shop conditions. Career Growth & Development At DCI, we believe in investing heavily in our mechanics. We offer: Skill-Based Pay Reviews: Earn automatic pay rate evaluations every 6 months as you level up your skills until you hit top pay! Production Bonuses: Earn extra compensation based on your efficiency and output. Advanced Certifications: Access to resources and training to become a National Board ASME Certified Welder. Tool Support: Take advantage of our Tool Purchase Program to build your professional kit. Clear Pathways: Transparent career advancement tracks within a massive, global logistics footprint. DCI Benefits Competitive pay ($22.00 – $42.00/hr) with built-in Tier Levels. Partially employer-paid medical, dental, and vision insurance. 401(k) with a generous employer match (Traditional and Roth options). 100% employer-paid short-term/long-term disability and group life insurance (up to 1.25x annual salary). Paid Time Off (PTO) plus 10 paid holidays. Optional HSA & FSA accounts. Tuition Reimbursement & Employee Referral Programs. An effective, award-winning, and proven shop safety culture. APPLY NOW and START A NEW CAREER WITH THE TANK PROS!

Job Description Company Background: We are 24 (and growing) market-leading operating companies that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients—including Fortune 500 companies and other industry leaders across the United States—with reliable, innovative service. Learn more about us at www.kelso-industries.com Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects—delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES • Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.)., • Fit, align, and secure pipe systems and supports according to specifications and drawings., • Read and interpret blueprints, schematics, and technical drawings., • Fabricate and install copper, carbon steel, stainless steel, and PVC piping., • Perform rigging, demo, and installation work on HVAC retrofit projects., • Inspect completed welds to ensure compliance with codes and safety standards., • Collaborate with project managers, foremen, and other trades to complete projects efficiently., • Maintain a clean, safe, and organized work area in compliance with OSHA and company policies.QUALIFICATIONS, • High school diploma or GED equivalent., • 3+ years of experience in pipe welding or mechanical retrofit environments., • Proficiency in one or more of the following:, • Soldering or brazing copper pipe, • Welding carbon or stainless steel pipe, • Fitting or threading steel and PVC pipe, • Ability to pass a pipe welding test (administered at our Bloomington shop)., • Skilled at reading and following mechanical drawings and specifications., • Valid driver's license and willingness to travel throughout Southern California., • Strong attention to detail, reliability, and safety mindset.COMPENSATION & BENEFITS, • Hourly wage: $30 – $50 per hour (based on experience and certification), • Per diem and hotel accommodations provided for overnight travel, • Paid travel time to and from job sites, • Comprehensive benefits package:, • Medical and dental (50% employer paid), • 401(k) with up to 4% company match, • Eligibility after 30 days of employment, • Paid Time Off (PTO) and company holidays, • Opportunities for long-term growth within the Kelso Industries familyJOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30—$60 USD Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at www.kelso-industries.com We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job Description Company: Maverick Manufacturing Inc. Location: Riverside, California Department: Welding / Fabrication / Production Reports To: Production Manager / Operations Manager Employment Type: Full-Time, Hourly, Non-Exempt Schedule: Monday–Friday, with overtime as needed Pay Range: $28.00–$36.00 per hour, depending on experience, welding skill level, and leadership capability Position Summary Maverick Manufacturing Inc. is seeking an experienced Welder Supervisor to oversee daily MIG welding and fabrication operations. This is a hands-on leadership position responsible for supervising welders, supporting production schedules, maintaining quality standards, and ensuring safe and efficient workflow. The ideal candidate must have strong MIG welding experience, the ability to read basic drawings and measurements, and the leadership skills to guide, train, and hold team members accountable. This position will primarily oversee welding and assembly for pallet racking uprights and load beams, while also supporting fabrication of yard ramps, dock ramps, dock platforms, mezzanine staircases, diamond plate/grating components, safety cages, and other custom miscellaneous products. Bilingual communication in English and Spanish is required. Key Responsibilities • Supervise and lead the daily work of MIG welders and fabrication employees., • Assign work based on production priorities, skill level, and delivery schedules., • Perform hands-on MIG welding when needed to support production., • Oversee welding and assembly of pallet rack uprights, load beams, yard ramps, dock ramps, platforms, mezzanine staircases, cages, and miscellaneous fabricated products., • Review work orders, drawings, measurements, and production instructions before work begins., • Confirm weld quality, fit-up, dimensions, alignment, and finished product appearance., • Train employees on proper welding techniques, setup, safety practices, and production expectations., • Monitor employee productivity, attendance, work quality, and compliance with company policies., • Identify production problems early and communicate issues to management., • Coordinate with production, shipping, material handling, and quality control teams., • Ensure tools, welding machines, fixtures, jigs, and work areas are properly maintained., • Enforce safety rules, PPE requirements, housekeeping standards, and proper material handling., • Assist with corrective action, coaching, and employee performance feedback when needed., • Help reduce rework, scrap, wasted labor, and production delays., • Maintain a professional, respectful, and accountable work environment.Required Qualifications, • Minimum 5 years of MIG welding experience in a manufacturing, fabrication, or structural steel environment., • Prior lead, supervisor, foreman, or team-lead experience preferred., • Bilingual in English and Spanish required., • Strong knowledge of MIG welding procedures, fit-up, grinding, measuring, and fabrication practices., • Ability to read tape measures, basic shop drawings, work orders, and production notes., • Experience working with steel components, tubing, beams, channels, plates, grating, or similar materials., • Ability to inspect welds for quality, consistency, strength, and appearance., • Strong communication and leadership skills., • Ability to train, correct, and motivate employees in a professional manner., • Must be dependable, punctual, organized, and able to work under production deadlines., • Must be willing to work overtime when production needs require it.Preferred Qualifications, • Experience with pallet rack, material handling equipment, ramps, platforms, stairs, or industrial steel, • Forklift experience., • Familiarity with welding fixtures, jigs, saws, grinders, drills, and fabrication equipment., • Ability to assist with production planning and workflow improvements., • Prior experience in a fast-paced manufacturing environment.Physical Requirements, • Must be able to stand, bend, lift, push, pull, and work in a shop/manufacturing environment., • Must be able to lift up to 50 lbs. as needed., • Must be able to wear required PPE, including welding helmet, gloves, safety glasses, hearing protection, and steel-toe footwear., • Must be able to work around welding equipment, grinders, forklifts, steel materials, and production machinery.Work Expectations This position requires a hands-on supervisor who can lead by example. The Welder Supervisor must be able to balance production speed, quality, safety, and employee accountability. This role is best suited for someone who is experienced in welding and fabrication but also has the maturity and communication skills to lead a team effectively. Equal Employment Opportunity Maverick Manufacturing Inc. is an Equal Opportunity Employer. We consider qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law. Job Posted by ApplicantPro

Job DescriptionDescription: Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks. Selects torch, torch tip, filler rod and flux, according to welding chart specifications or type and thickness of metal. Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding torch. Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure, to obtain desired flame. Holds torch at proper angle to metal and guides along weld joint, applying filler rod to molten area to form weld. Examines weld for bead size and other specifications. Repairs broken or cracked metal objects, fills holes, and builds up metal parts. Applies flux to workpiece instead of filler rod. Preheats workpiece in furnace or with torch. Lays out, positions, and tack welds workpieces. Welds along vertical or overhead weld lines. Scarfs or grooves weld prior to applying filler metal. Chips or grinds off excess weld, slag, or spatter. Cleans or degreases parts. Reads job specifications to determine machine adjustments and material requirements. Sets stops or guides to specified length as indicated by scale, rule, or template. Positions workpiece against stops or aligns layout marks with die or blade. Pushes button or depresses pedal to activate machine. Observes machine operation to detect workpiece defects or machine malfunction. Measures workpiece dimensions to determine accuracy of machine operation. Removes burrs, sharp edges, rust, or scale from workpiece. Performs minor machine maintenance such as oiling machines, dies, or workpieces. Assists machine operators to set up machine, and stack, mark, pack, and transport finished workpieces. Rivets and spot welds workpieces Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills Basic Computer Skills including use of email may be required. Certificates, Licenses, Registrations N/A Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must occasionally lift and/or move up to 50 pounds.

Job Description WE ARE SEEKING AN EXPERIENCED WELDER/FABRICATOR THE WELDER/FABRICATOR WILL BUILD STANDARD AND CUSTOMIZED TRUCK BODIES AND EQUIPMENT AND WILL ALSO BE ABLE TO WORK WITH OTHER COMPONENTS TO MAKE SURE DELIVERY IS ON TIME. RESPONSIBILITIES: • WELD/FABRICATE TRUCK BODIES, • FABRICATE, INSTALL AND REPAIR VARIOUS TRUCK EQUIPMENT AND COMPONENTS, • INSTALL TRUCK EQUIPMENT, • INSTALL LIFTGATES, TOOL BOXES, FLOORING, SIDE GATES AND ELECTRICAL COMPONENTS, • FABRICATE AND INSTALL CUSTOM RACKS QUALIFICATIONS: • MUST HAVE A MINIMUM (5) YEARS EXPERIENCE IN WELDING AND FABRICATION., • PROFFESSIONAL KNOWLEDGE OF WELDING AND FABRICATION, • ABILITY TO HANDLE PHYSICAL WORKLOAD, • MUST BE A QUICK LEARNER, • READ A TAPE MEASURE Send resume to: info@eagletruckbody.com Company DescriptionWE MANUFACTURE TRUCK BODIES - BUILD WOODEN AND STEEL GATES - MANUFACTURE AND INSTALL HITCHES - MOUNT TOOLBOXES - LIFTGATES -TARP SYSTEMS - RACKS AND CUSTOM BUILT EQUIPMENT.WE MANUFACTURE TRUCK BODIES - BUILD WOODEN AND STEEL GATES - MANUFACTURE AND INSTALL HITCHES - MOUNT TOOLBOXES - LIFTGATES -TARP SYSTEMS - RACKS AND CUSTOM BUILT EQUIPMENT.

Job Description Fabricator / Welder Depot Connect International (DCI) Location: Bloomington, CA Pay Range: $22.00 – $42.00 per hour (based on experience) Build More Than Parts — Build a Career at DCI Depot Connect International (DCI) is a global leader in Tank Trailer and ISO Tank Container Services, as well as Tank Trailer Parts manufacturing and distribution. If you’re a fabricator/welder who wants more than repetitive production work, DCI offers an opportunity to fabricate, problem-solve, and create real-world solutions on critical transportation equipment used across multiple industries. At DCI, our welders don’t just repair components — they build, modify, and improve equipment that keeps the industry moving. We’re looking for team members who bring: • Strong fabrication experience, • Solid welding skills, • Mechanical aptitude, • A creative, problem-solving mindset If you enjoy working with metal, figuring out how to repair or build something the right way, and continuously expanding your skill set, you’ll thrive here. We invest in our team through hands-on training, mentorship, and career advancement opportunities — all within a stable, growing global company that values craftsmanship and teamwork. Role Overview The Fabricator/Welder is responsible for fabricating, repairing, and modifying new and used tank trailers and ISO tank containers. This role involves welding Aluminum, Mild Steel and Stainless steel, In all Welding types: Tig, Mig and Arc. Key Responsibilities • Fabricate, repair, and modify new and used tanks, • Perform MIG and TIG welding, • Conduct gas welding, brazing, and various arc welding processes, • Perform cutting, grinding, and metal repair, • Repair cracked or damaged tank components, • Working in confined spaces, • Perform basic mechanical repairs related to tanks and trailers, • Follow all OSHA safety and environmental regulations, • Maintain a clean, organized, and safe work environment, • Perform additional duties as assigned Qualifications • Welding and fitting experience (tank, trailer, or heavy equipment preferred but not required), • Ability to operate machinery: Brake Press, Shear, etc., • Basic mechanical skills, • Ability to read and understand measurements and job documentation, • Welding certificate is a plus (not required) Employee Growth & Training • On-the-job training provided, • Steps to Success Program and 6 month reviews to grow each individual, • Opportunities to expand mechanical, fabrication, and welding skills, • Career advancement within a stable, global organization, • Support for continued learning and professional development DCI Benefits • Medical, dental, and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional HSA & FSA, • Life insurance, • Tuition Reimbursement, • Parental leave

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects—delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES • Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.)., • Fit, align, and secure pipe systems and supports according to specifications and drawings., • Read and interpret blueprints, schematics, and technical drawings., • Fabricate and install copper, carbon steel, stainless steel, and PVC piping., • Perform rigging, demo, and installation work on HVAC retrofit projects., • Inspect completed welds to ensure compliance with codes and safety standards., • Collaborate with project managers, foremen, and other trades to complete projects efficiently., • Maintain a clean, safe, and organized work area in compliance with OSHA and company policies.QUALIFICATIONS, • High school diploma or GED equivalent., • 3+ years of experience in pipe welding or mechanical retrofit environments., • Proficiency in one or more of the following:, • Soldering or brazing copper pipe, • Welding carbon or stainless steel pipe, • Fitting or threading steel and PVC pipe, • Ability to pass a pipe welding test (administered at our Bloomington shop)., • Skilled at reading and following mechanical drawings and specifications., • Valid driver's license and willingness to travel throughout Southern California., • Strong attention to detail, reliability, and safety mindset.COMPENSATION & BENEFITS, • Hourly wage: $30 – $50 per hour (based on experience and certification), • Per diem and hotel accommodations provided for overnight travel, • Paid travel time to and from job sites, • Comprehensive benefits package:, • Medical and dental (50% employer paid), • 401(k) with up to 4% company match, • Eligibility after 30 days of employment, • Paid Time Off (PTO) and company holidays, • Opportunities for long-term growth within the Kelso Industries familyJOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30—$60 USD Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Job Information Position starting pay: $25.The initial review of applications will begin starting July 13th, 2026.Applications received before the initial review date will be considered, with qualifying applicants being eligible to participate in the phone screen process.Position Summary Under gener

CJ Logistics - - Responsibilities: Repair and salvage damaged products for reuse; Assist inbound receiving and ensure items are accounted for; Support Lean Logistics Center initiatives for efficiency; Participate in training programs to develop skills; Collaborate with team to ensure accurate proce

PrideStaff - - Responsibilities: Inspect incoming loads; Check shipping documents for correct customer information; Operate propane and electric forklift vehicles; Load semi-trucks and box trucks with required finished product; Assist in inventory cycle counts as needed.

Pickup and delivery of cargo to and from various destinations usually within proximity of the consolidation/distribution center.The loading and unloading of trailers utilizing the same techniques, technology and procedures as a dock worker.Actual duties and schedule may vary depending on terminal lo

Weyerhaeuser - - Responsibilities: Safely operate propane or diesel forklift to move products from stock lines to staging and/or cut stations; Safely load products; Accurately perform basic math for shipping/receiving; Count units, record totals, and document shipping and receiving activities; Wear

CMA CGM Group - - Responsibilities: Move materials from receiving to storage; Receive, store and distribute materials; Assemble customer orders and palletize; Open containers and sort materials; Operate manual hand tools.

CEVA Logistics - - Responsibilities: Move materials from receiving to storage; Receive, store and distribute materials; Assemble customer orders and palletize; Operate manual hand tools; Sort materials on racks and bins.

Responsibilities: Operates seated and standing forklift to transfer product from warehouse floor to load trucks; Unloads and stocks incoming merchandise and loads outbound trailers when needed; Checks, verifies, and audits merchandise and enters data into remote data terminals; Operates forklift to

Menasha Corp - - Responsibilities: Maintain, diagnose, troubleshoot, and repair production equipment and machinery; Perform preventive maintenance on equipment to corporate quality and safety standards; Troubleshoot mechanical issues to maintain productivity and quality; Assist in setup and tear do

Niagara Bottling Inc - - Responsibilities: Operate sit-down motorized forklift safely; Unload and stack pallets; Maintain inventory in production area by anticipating and tracking usage; Monitor inventory by reporting discrepancies; Log movements of supplies, materials and finished goods.

Aerotek - - Responsibilities: Perform advanced troubleshooting and repair on industrial production equipment and facility-related systems.Read, interpret, and use schematics, prints, and electrical diagrams to diagnose and resolve equipment issues.Conduct preventive maintenance inspections on indus

Kellermeyer Bergensons Services - 2496 West Walnut Avenue - Responsibilities: Operate forklift or other hand truck; Load and unload goods from vehicles; Move goods around storage facility and stack in storage bays; Perform daily equipment checks and maintenance; Provide support to the janitorial cre

Aerotek - - Responsibilities: Operate sit-down and reach forklifts to safely move product loads around the facility; Pick and stage orders accurately for the next day’s shipments; Handle shipping and receiving functions, including loading, unloading, and organizing incoming and outgoing products;

CMA CGM Group - - Responsibilities: Move materials and items from receiving or production areas to storage or to other designated areas; Receive, store and distribute material, tools equipment, and products within assigned area; Assemble customer orders from stock and place orders on pallets or she

Westlake - - Responsibilities: Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems on production equipment; Learn to read and interpret safety rules and maintenance instructions; Maintain production equipment to meet production schedules and safety standards; Document w

CMA CGM Group - - Responsibilities: Move materials from receiving or production areas to storage; Receive, store and distribute materials and tools; Assemble customer orders; Open containers and sort materials on racks; Operate manual hand tools.

PrideStaff - - Responsibilities: Operate forklifts to move materials within the shipping area; Assist in loading/unloading and staging finished products; Record and verify shipping documents and inventory movements; Support cycle counts and inventory accuracy; Perform general warehouse duties as re

CMA CGM Group - - Responsibilities: Promote safe work practices.Lead team members in daily activities and assign tasks.Organize loading and unloading of products.Move materials from receiving or production areas to storage or to other designated areas.Ensure the proper labelling, tagging and packin

CMA CGM Group - - Responsibilities: Move materials from receiving or production areas to storage or to other designated areas; Receive, store and distribute material, tools equipment, and products within assigned area; Assemble customer orders from stock and place orders on pallets or shelves, or m

Raytheon - 8200 Arlington Avenue - Responsibilities: Set up and operate numerically controlled multi-axis drilling machines; Inspect parts for workmanship and dimensional accuracy; Read and interpret blueprints, sketches, and manufacturing documents; Use overhead cranes in the production environment

FedEx - JobID: 447FE00647FA9F40CEF03530A7EB0BFE [Warehouse Associate / Forklift Operator] As a Forklift Operator at FedEx, you'll: Full case order pick for replenishment, customer orders and packaging components; Perform pallet retrieval and put away in narrow aisle bulk rack storage system; Perform

ProLogistix - - Responsibilities: Operate stand up reach/Cherry Picker forklift safely in a fast-paced distribution environment; Transfer finished product from out-feed line; Load finished product in shipping trailer; Scan units into trailer using RF.

Raytheon - 8200 Arlington Avenue - Responsibilities: Set up and operate numerically controlled multi-axis drilling machines; Inspect machined parts for workmanship and dimensional accuracy; Read and interpret blueprints and manufacturing documentation; Use dial indicators and precision tools to veri