Welder jobs in Peoria, ArizonaCreate job alerts

Job Description Job Title: Structural Welder – 2nd Shift Job Description This role offers an opportunity for a skilled Structural Steel Welder to work with heavy-grade structural steel using flux core dual shield welding techniques on 2nd shift. You will focus on high-precision welding with thick wire on material ranging from 1 to over 5 inches, supporting large-scale fabrication projects in a busy industrial welding environment. The position requires strong attention to detail, consistent productivity, and the ability to perform repetitive welding tasks while maintaining high quality standards. Responsibilities • Fabricate structural steel components using heavy-grade metal ranging from 1 to over 5 inches in thickness., • Perform flux core dual shield welding using thick 3/32 inch wire on structural steel assemblies., • Measure accurately using a tape measure to 1/16 of an inch to ensure precise fit and alignment., • Interpret and follow weld symbols on shop drawings to execute correct weld types and locations., • Operate common welding shop tools and equipment safely and efficiently., • Collaborate closely with fitters who handle blueprint reading, focusing on executing welds based on provided weld symbols and directions., • Maintain consistent productivity and independence while performing repetitive welding tasks on identical pieces., • Sustain high-quality welds in an industrial steel fabrication environment that is dusty, loud, and physically demanding., • Follow safety procedures and best practices for welding and working in a structural steel shop., • Contribute to large projects involving significant man hours by meeting deadlines and supporting overall production goals. Essential Skills • Demonstrated expertise in flux core dual shield welding on thick structural steel., • Ability to work confidently with heavy structural steel ranging from 1 to 5+ inches thick., • Strong measurement skills, including reading a tape measure accurately to 1/16 of an inch., • Proficiency in interpreting shop drawings and weld symbols to perform correct welds., • Hands-on experience operating welding shop tools and equipment in an industrial environment., • Capability to maintain focus and weld quality during long periods of repetitive welding tasks., • Self-starter mindset with the ability to work independently while remaining productive., • Team-oriented approach with a commitment to completing projects efficiently and with high quality., • Approximately 3 years of structural welding experience preferred, but not required., • At least 1 year of flux core welding experience preferred. Additional Skills & Qualifications • Experience with MIG welding and structural steel fabrication., • Experience in industrial welding and steel fabrication shop environments., • Familiarity with welds related to structural applications and heavy steel components., • Bilingual communication skills are a plus., • Interest in obtaining certifications such as D1.5 seismic and restricted access welding (6G), which will be provided., • Comfort working in a non-climate-controlled, dusty, and loud fabrication shop., • Willingness to work 2nd shift hours and overtime as needed. Why Work Here? You will join a cohesive team where many employees have more than ten years of tenure, reflecting a stable and supportive work culture. The environment emphasizes teamwork, hard work, and mutual support, ensuring that everyone contributes and grows together. When converted to a permanent role, you will have access to medical, dental, and vision benefits, as well as a 401(k) plan, supporting your long-term financial and personal well-being. You will also have the opportunity to earn valuable certifications in D1.5 seismic and restricted access welding (6G), enhancing your professional credentials and career prospects. Work Environment The role is based in a structural steel fabrication shop operating under a large awning that covers the shop floor, providing shade but no climate control. The environment is a typical industrial welding setting: open area, dirty, dusty, and loud, with heavy steel fabrication taking place daily. You will work with standard welding tools and equipment on large structural steel projects, often involving substantial man hours. The position is on 2nd shift, with typical hours from 5:00 p.m. to 3:30 a.m., and an average workweek of approximately 55 to 58 hours, including overtime. The shop focuses on large-scale projects and continues to bid on jobs that involve significant labor, offering consistent work in a demanding but rewarding industrial setting. Job Type & Location This is a Permanent position based out of Peoria, AZ. Pay and Benefits The pay range for this position is $18.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Peoria,AZ. Application Deadline This position is anticipated to close on Aug 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Structural Welder $22-25/HR – 1st Shift Job Description This role focuses on welding and fabricating structural steel components for a variety of construction and industrial projects on a 1st shift schedule. You will use MIG and stick welding techniques with 3/32 and 0.45 wire to produce high-quality structural assemblies while closely following blueprints and safety standards. The position requires strong technical welding skills, attention to detail, and the ability to collaborate with engineering, fabrication, and construction teams in a busy production environment. Responsibilities • Weld and fabricate structural steel components, including beams, columns, and girders, using 3/32 and 0.45 wire., • Perform MIG and stick welding on structural steel in accordance with project specifications and codes., • Read and interpret blueprints, shop drawings, schematics, and welding symbols to ensure accurate layout and assembly., • Set up, operate, and adjust welding equipment such as MIG, TIG, and stick welders to achieve proper weld quality., • Cut and shape metal using tools such as plasma cutters, oxy-acetylene torches, grinders, and other common welding shop tools., • Inspect completed welds for quality, accuracy, and compliance with specifications and standards., • Collaborate with engineers, fabricators, and construction teams to meet project timelines and quality goals., • Maintain, clean, and troubleshoot welding equipment to ensure safe and optimal performance., • Follow all safety protocols, shop procedures, and industry standards to prevent accidents and injuries., • Perform post-welding activities such as grinding, cleaning, and polishing to prepare components for further processing or installation., • Use power tools and other shop equipment safely and efficiently as part of daily fabrication tasks. Essential Skills • Proven experience in structural welding and metal fabrication., • Proficiency in MIG and stick welding techniques using 3/32 and 0.45 wire., • Ability to read and interpret blueprints, shop drawings, schematics, and welding symbols., • Experience with structural steel welding and MIG structural welding in a production or construction environment., • Ability to use oxy-acetylene torches for cutting and heating operations., • Skill in using power tools and common welding shop tools, including grinders and related equipment., • Strong attention to detail to ensure accurate fit-up, weld quality, and compliance with specifications., • Effective problem-solving skills to address fit, alignment, and fabrication challenges., • Physical stamina and the ability to work in challenging environments, including at heights and in large production areas. Additional Skills & Qualifications • Experience working in a structural steel production facility or similar industrial environment., • Familiarity with TIG welding equipment and processes, even if not used as the primary method., • Comfort collaborating with engineers, fabricators, and construction teams on multi-phase projects., • Commitment to safety practices and continuous improvement in welding and fabrication processes. Why Work Here? Employees benefit from an employee-owned culture where individual contributions directly support shared success and profit sharing. The organization offers a 401(k) plan with company matching, subsidized medical, dental, and vision coverage, and discounted premiums for completing an annual physical and refraining from tobacco use. Team members receive company-paid basic life insurance, as well as short- and long-term disability coverage, with the option to purchase additional life insurance at company-subsidized rates. The company also provides practical perks such as seasonal refreshments, periodic shop events, branded T-shirts and merchandise, and a boot voucher. After one full year of employment, employees become eligible for ownership participation, including an annual payout based on overall company performance. Work Environment The role is based in a large structural steel production facility located in El Mirage, AZ, with work performed both inside the shop and outside as needed. The facility uses swamp coolers and fans to provide a somewhat climate-controlled environment and is organized, with new production lines being added to support growing operations. Team members work with welding equipment such as MIG, TIG, and stick welders, plasma cutters, oxy-acetylene torches, grinders, and common welding shop tools. The environment is industrial and hands-on, requiring the use of appropriate work attire and protective gear suitable for a structural steel shop and field conditions, including work at heights and around heavy materials and equipment. Job Type & Location This is a Contract to Hire position based out of El Mirage, AZ. Pay and Benefits The pay range for this position is $22.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Mirage,AZ. Application Deadline This position is anticipated to close on Jul 31, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Interstate Assembly Systems is looking for experienced Welders and/or Fabricators at our Surprise Arizona location. This interesting and varied position consists of fabrication and assembly of pre-cut steel or aluminum large and small components to complete a finished product. This will include grinding and possibly wiring. Safety and cleanliness are a major part of the work. Sometimes working independently, other times as part of a team, the Welder is an important role for Assembly Systems. Job Duties: • Most work is wire feed carbon steel horizontal welding, some vertical welds required, • Handling material including moving steel or aluminum onto fixtures and jigs, • Fabrication according to print, with willingness and ability to ask for clarification whenever there are questions to ensure a product which meets customer expectations, • Adhere to all administrative policies and practices including logging time spent on a job and keeping files up to date, • Other duties as assigned Required Skills and Experience: • Must be able to perform physical work, • High school degree or G.E.D., • Ability to use and understand basic tools such as tape measure, prints/drawings, • Positive attitude, • Punctuality, • Willing and able to learn Preferred Skills and Experience: • Welding experience, • Wiring experience, • Experience with and ability to understand drawings and prints, diagrams, etc., • Experience with material handling equipment including skid steer, forklift, etc. Employee Benefits: • Competitive Wages – Be paid your worth!, • Uniforms - fully supplied by Interstate including cleaning!, • Tool program - available, • Tuition assistance - for educational and ongoing career growth, • Health, dental and vision coverage - begins on the first day of the following month., • Paid Time Off - (PTO) starts accruing day one of your full-time employment., • Holidays - 6 Holidays and 2 Floating Holidays per year, • 401(K) - with company matching., • Long Term Disability - Supplied, • Short Term Disability - Supplied, • Life Insurance - Supplied, • Healthiest You - Virtual Health Care paid by Interstate., • PPE Reimbursement- Safety Glasses and Safety Boot Reimbursement, • Pet Insurance – We care about our furry friends!, • Employee Discounts - available on products and services, • Paid Employee Assistance Program - Free 24/7 Access to a guidance consultant regarding life challenges you or family member may face., • Paid Health and Well-being screening - for employees and their spouse Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Interstate Companies is an Equal Opportunity Employer, and we encourage all qualified and interested persons to apply for this position by submitting a resume for consideration.

Job DescriptionWho We Are At All Things Metal Industries, we don’t just build steel—we build people, relationships, and lasting careers. We’re proud to be a family-owned company that’s been recognized multiple times as one of Arizona’s Best Places to Work, and we take that seriously. Our culture is fast-paced and driven, but also supportive and humble. We value teammates who are hungry to learn, smart in how they work, and humble enough to grow with others. This isn’t a place for short-term gigs—you’ll find steady work, opportunities to advance, and a team that truly has your back. Whether it’s in the shop, the field, or the office, we believe in promoting from within, investing in our people, and helping each other reach the next level. If you’re looking for a long-term home where hard work meets big opportunity, All Things Metal is the place to be. ATM Steel ATM Steel, formerly All Things Metal, is our structural steel fabrication and erection team. We focus on large-scale projects in the Phoenix area, bringing experience, capacity, and precision to every job. Our name reflects the size and scale of our work while staying true to the iron-strong relationships we’ve built over 22 years. Role Overview At All Things Metal, our Fitter/Welders are at the heart of what we do. In this role, you’ll work hands-on in our fabrication shop, fitting and welding structural steel that becomes part of projects across Arizona. Every day brings something new! From interpreting shop drawings and laying out materials, to running clean welds and ensuring the final product meets the highest quality standards. This is not a short-term project hire — it’s a steady, full-time opportunity with room to grow. You’ll have consistent hours, supportive teammates, and the chance to sharpen your skills while contributing to work you can be proud of. If you’re someone who enjoys problem-solving, working with your hands, and seeing projects come to life, this is the place for you. Key Responsibilities • Layout and fit-up steel components per shop drawings, • Set up and adjust welding machines/wire feeders for accurate welds, • Perform welds per AWS D1.1 standards (clean, consistent, and defect-free), • Verify fit-up of full penetration welds meets drawings, codes, and quality control requirements, • Grind, clean, and bevel steel as needed for weld preparation, • Remove slag, splatter, and defects to maintain clean finishes, • Maintain and properly store equipment during and after use, • Read and interpret shop drawings accurately, • Complete assigned fabrication tasks safely and efficientlyAdvantages but not required, • MIG Welding with solid core gas-shielded wire (Light welding of railings/misc. steel), • Ability to weld mild steel over 1-1/2' thickness Qualifications • 3–5 years of experience in structural steel fitting, layout, and welding (Flux Cored Arc Welding required), • Ability to read and interpret shop drawings and plans, • Must pass an in-shop layout/fit-up test (bring hood, gloves, and jacket), • Valid identification (background and drug screening required), • OSHA 10 or OSHA 30 certification a plus, • Professional working proficiency in English required, • MIG welding with solid-core gas-shielded wire (preferred), • Experience welding mild steel over 1.5' thick (preferred) Skills & Abilities • Strong attention to detail and commitment to quality, • Safety-oriented mindset, • Team player with a positive, motivated attitude, • Punctual, dependable, and accountable, • Physically capable of lifting 50+ lbs,, • Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time, • Work outdoors in all weather conditions Schedule Monday - Friday 5 am - 3 pm with a 1 hour unpaid lunch Occasional half days on Friday (depending on need and department) Compensation & Benefits • $20+/hourly depending on experience, with opportunity for advancement after the first 90 days, • Steady, long-term work in a supportive environment, • First-time homebuyer program with $500 bonus and optional realtor/mortgage support, • Dave Ramsey SmartDollar financial education resources, • Full benefits including medical, dental, vision, PTO, and sick time, • 401(k) with company match and profit-sharing contributions, • Family-friendly events and team-building activities, • Birthday and work anniversary recognition, • Cash bonuses for production roles and internal growth opportunities#priority

Job Description Overview: Now Hiring Welders – 2nd Shift | El Mirage, AZŌnin Staffing is hiring experienced Welders for both 1st and 2nd shift at a well-established structural steel manufacturing facility in El Mirage, AZ. If you have a strong background in structural welding and fabrication, this is a great opportunity to put your skills to work and grow with a company that values your expertise. • Location: El Mirage, AZ, • Shifts Available:, • 2nd Shift: 3:00 PM – 2:00 AM (includes shift differential pay), • Pay: $22-24 based on experience Skills and Experience: Key Responsibilities • Perform high-quality MIG welding (GMAW) on structural steel components., • Read and interpret blueprints and welding symbols accurately., • Use fabrication techniques to meet production standards and project specs., • Inspect welds and materials to ensure adherence to quality control requirements., • Collaborate with team members to maintain a safe, efficient work environment. Qualifications • Prior experience in structural steel fabrication., • Proficient in GMAW (MIG) welding., • Knowledge of fabrication techniques and tools., • Strong background in quality control and inspection procedures., • Ability to lift up to 50 lbs and work in a physically demanding environment., • Must pass a weld test., • Reliable transportation and consistent attendance required. Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team

Job DescriptionIron and steel company looking for a full-time Welder. We make wrought iron gates, railings, stairs, fences, and other items for the residential building industry. This is not a structural steel welding job. Job Details: • Must be able to pass a drug test., • Weld test prior to employment. Please respond to this ad with your resume and/or experience and contact information. We accept applications Tuesday thru Thursday, 9am-2pm at 10227 N El Mirage Rd El Mirage AZ 85335. Work is M-F, 5 am start time.

Job Description Fitter/Welder A Responsible for utilizing safe practices, personal protective equipment (PPE), and procedural requirements while interpreting weld procedure specifications and engineered drawings. Your primary focus will be to tack and weld structural components such as beams, columns, joists, frames, stairs, and railings, all in accordance with Southwest Steel processes and procedures. Alignment with our company’s Vision & Values, Safety, and Quality policies is essential to maintaining a successful and efficient work environment. Responsibilities • Safety & Compliance: Identify, prevent, and correct potential safety hazards in accordance with, • Southwest Steel Policies and Procedures., • Always maintain a clean and safe work area., • Material Preparation: Identify and prepare materials for welding based on SWS Quality Management, • System (QMS) specifications and engineered drawings. Utilize appropriate tools and measuring devices for accuracy., • Welding Operations: Perform welding on components and assemblies using GMAW, FCAW, and GTAW* processes, following Southwest Steel weld procedure specifications., • Cutting & Shaping: Use equipment such as chop saws, band saws, and oxy/fuel torches to cut workpieces., • Heat, form, and dress metal parts using hand tools, torches, or arc welding equipment., • Quality Assurance: Achieve a pass rate of 98% or higher for all CJP (Complete Joint Penetration) and PJP (Partial Joint Penetration) weldments., • Material Handling: Move and position structural components using chain rigging, overhead cranes, jib cranes, and other material handling equipment., • Inspection & Alignment: Inspect equipment and structural components to ensure alignment with Southwest Steel processes and procedures • Additional Duties: Perform other duties as required that may fall outside the normal scope of work. Requirements • Certification: Ability to pass 3G FCAW, 2G FCAW and 2F D1.3 GMAW weld tests. (*4G D1.1 FCAW; 3F D1.6 FCAW;4F D1.6 FCAW; 3G D1.6 GTAW; 2F GTAW), • Expertise: In depth knowledge of oxy/fuel operations, welding processes, shop machinery, and repair procedures for welding discontinuities., • Fitting/Welding Skills and Quality Control: Ability to identify weld discontinuities and apply basic repair procedures to ensure high-quality welds. Expert-level knowledge of welding techniques to meet industry standards and project specifications., • Technical Skills: Proficient in interpreting blueprints, tolerances for gaps, holes, distortion control, camber, sweep, connections, splices, and cord length. Ability to identify weld discontinuities and in-depth knowledge of repair processes. In depth knowledge of weld procedure specifications and weld symbols., • Equipment Operation: In depth knowledge and ability to safely operate overhead cranes and jib cranes., • Tooling: Possess all necessary tools to effectively perform fitting, welding and fabrication tasks., • Work Ethic: Ability to multi-task, demonstrate punctuality, and maintain a strong work ethic in a team environment., • Listed skills are required for further advancement within this job classification. EEO: SME Industries, Inc. is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Company DescriptionFounded in 1992 by Jerry and Craig Moyes. Southwest Steel is a division of SME Industries. SME Industries serves a diverse range of sectors including commercial, industrial, healthcare, and more. With five plants across the Western U.S. Companies within the SME family specialize in miscellaneous metal and custom steel finishing, the most-trusted and industry standard seismic bracing and both seismic-controlled and wind-controlled moment frame connections, and logistics. Today, SME continues the legacy established by our founders. We execute the projects that are too challenging or too big for others and we do so with a focus on safety and quality for our partners and team members. At SME Steel, we’re built on hard work, skill, and pride. We don’t just build steel — we build careers you can count on. As a leader in structural steel fabrication and erection, we provide a safe, team-driven workplace where craftsmanship and accountability matter. With steady work, modern equipment, and opportunities to grow, SME Steel is a place where your skills make a real impact. Our people take pride in knowing the steel they build stands strong in projects that define skylines and communities.Founded in 1992 by Jerry and Craig Moyes.\r\n\r\nSouthwest Steel is a division of SME Industries. SME Industries serves a diverse range of sectors including commercial, industrial, healthcare, and more. With five plants across the Western U.S. Companies within the SME family specialize in miscellaneous metal and custom steel finishing, the most-trusted and industry standard seismic bracing and both seismic-controlled and wind-controlled moment frame connections, and logistics.\r\n\r\nToday, SME continues the legacy established by our founders. We execute the projects that are too challenging or too big for others and we do so with a focus on safety and quality for our partners and team members.\r\nAt SME Steel, we’re built on hard work, skill, and pride. We don’t just build steel — we build careers you can count on. As a leader in structural steel fabrication and erection, we provide a safe, team-driven workplace where craftsmanship and accountability matter. With steady work, modern equipment, and opportunities to grow, SME Steel is a place where your skills make a real impact. Our people take pride in knowing the steel they build stands strong in projects that define skylines and communities.

Job Description Important Notes • Training required on 2nd Shift (Mon–Fri, 3:00 PM – 11:00 PM) for initial weeks, • Safety-sensitive role – subject to random drug testing, • Eye exam and FAA drug test required, • AWS Certified Welder required Position Overview We are seeking an experienced Aerospace TIG Welder specializing in manual and orbital GTAW processes. This role involves welding high-performance aerospace alloys while ensuring strict compliance with industry standards, procedures, and quality requirements. Key Responsibilities • Set up and operate manual and automated GTAW (TIG) welding systems, • Perform precision welding on aerospace components and exotic alloys, • Read and interpret blueprints, weld symbols, and technical documentation (WPS/WPQR), • Conduct pre-weld preparation, cleaning, and post-weld inspection, • Inspect welds using visual and measurement tools to ensure compliance, • Troubleshoot welding equipment and processes, • Maintain clean, organized, and FOD-free work areas, • Collaborate with engineering teams to resolve welding issues, • Support training and mentorship of junior welders, • Follow all safety procedures and quality standards Required Qualifications • High School Diploma or equivalent, • 8+ years of welding experience (aerospace preferred), • AWS D17.1 certification (Groups IIb, IIIB, VII – 1G or higher), • Strong experience with manual GTAW (TIG) welding, • Experience with orbital GTAW systems (Orbitalum, AMI, or similar), • Ability to read and interpret WPS, WPQR, and technical drawings, • Knowledge of purge systems, backing gas control, and weld inspection methods, • Strong math skills and mechanical aptitude, • Excellent communication and teamwork skills Preferred Experience • Welding exotic aerospace alloys such as:, • Haynes 188, • Hastelloy X, • Inconel 718, • L-605 (Cobalt) Pre-Screen Requirements (Must Be Included in Resume) • AWS D17.1 certification details (groups and positions), • Total years of welding experience (including aerospace/exotic alloys), • Experience with orbital GTAW systems (Yes/No), • Ability to read and work from WPS/WPQR documents (Yes/No), • Ability to pass weld qualification testing within 2 weeks (Yes/No) Work Environment • High-precision aerospace manufacturing environment, • Requires attention to detail, manual dexterity, and adherence to strict quality standards

Job DescriptionQLM is seeking experienced 2G, 3G, and 4G Welders to join our fabrication team in Glendale, Arizona. If you can weld vertical and overhead without breaking a sweat, we want to talk to you. Responsibilities: • Perform 2G (horizontal), 3G (vertical), and 4G (overhead) welds on carbon steel, • Read and interpret blueprints and weld symbols, • Fabricate and assemble tank components to specification, • Maintain weld quality and production standards, • Follow all shop safety protocols Qualifications • Proven experience welding in 2G, 3G, and 4G positions, • 6G CERTIFIED FOR HIGHER END OF PAY SCALE, • Ability to pass an on-site weld test, • Experience with MIG, Flux Core, and/or Stick welding, • Ability to read blueprints and use measuring tools accurately, • Strong attention to detail and commitment to safety, • Reliable transportation to Glendale, AZ Quality Labor Management (QLM) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, transgender status or sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. The Company complies with applicable Federal state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Required Skills & Experience Basic Qualifications • 8+ years of manufacturing engineering, with at least 5 years focused on structural steel fabrication in a high-volume production environment., • Deep technical knowledge of structural steel fabrication: SMAW, GMAW, FCAW, and SAW welding; plasma and laser cutting; CNC drilling and coping., • Working knowledge of AWS D1.1 Structural Welding Code: WPS development, PQR testing, welder qualification, and in-process inspection., • Experience designing fabrication work instructions, welding procedures, and quality plans., • Demonstrated track record improving fabrication throughput and reducing defect rate. Nice to Have Skills & Experience • AWS Certified Welding Inspector (CWI) credential., • Experience with robotic welding integration for structural steel., • Background in AISC fabrication standards (AISC 360, AISC 303)., • Six Sigma Green Belt or equivalent. Job Description The Sr. Manufacturing Engineer for Chassis Fabrication is the technical authority on structural steel fabrication processes — cutting, drilling, coping, fit-up, welding, and surface treatment. You own the process from raw steel to completed structural frame: setting the standards, solving the hard problems, and ensuring the fabrication line sustains the throughput we need. This role leads the fabrication-focused manufacturing engineering staff and reports to the Director of Manufacturing. Responsibilities Process Ownership • Own all fabrication process standards: cutting, drilling, coping, fit-up, tack welding, weld sequencing, distortion control, and post-weld treatment., • Design and document fabrication work instructions to AWS D1.1 Structural Welding Code requirements., • Establish and maintain the welding procedure specification library; ensure all production welders are qualified per AWS D1.1., • Define and control fit-up tolerances for corner casting placement — dimensional accuracy here is non-negotiable., • Own the fabrication quality plan: in-process inspection points, dimensional verification, and weld inspection criteria. Line Performance • Own fabrication takt time analysis: measure actual cycle times, identify bottlenecks, and drive continuous improvement., • Lead root-cause analysis on fabrication defects, dimensional nonconformances, and weld rejections., • Evaluate new fabrication equipment and processes; develop capital justification for investments that improve throughput or reduce defects., • Support robotic weld cell integration: weld path programming strategy, fixturing requirements, and quality verification. Standards • Maintain the AWS D1.1 structural welding program: WPS/PQR library, welder qualification records, and inspection records., • Own the material traceability program: mill cert verification, heat/lot tracking, and floor identification.

Interstate Assembly Systems is looking for experienced welders and/or fabricators at our Surprise, Arizona location. This interesting and varied position consists of fabrication and assembly of pre-cut steel or aluminum large and small components to complete a finished product. This will include grinding and possibly wiring. Safety and cleanliness are a major part of the work. Sometimes working independently, other times as part of a team, the welder is an important role for Assembly Systems. Job Duties: • Most work is wire feed carbon steel horizontal welding, some vertical welds required, • Handling material including moving steel or aluminum onto fixtures and jigs, • Fabrication according to print, with willingness and ability to ask for clarification whenever there are questions to ensure a product which meets customer expectations, • Adhere to all administrative policies and practices including logging time spent on a job and keeping files up to date, • Other duties as assigned Required Skills and Experience: • Must be able to perform physical work, • High school degree or G.E.D., • Ability to use and understand basic tools such as tape measure, prints/drawings, • Positive attitude, • Punctuality, • Willing and able to learn Preferred Skills and Experience: • Welding experience, • Wiring experience, • Experience with and ability to understand drawings and prints, diagrams, etc., • Experience with material handling equipment including skid steer, forklift, etc. Employee Benefits: • Competitive wages be paid your worth!, • Uniforms fully supplied by Interstate including cleaning!, • Tool program available, • Tuition assistance for educational and ongoing career growth, • Health, dental and vision coverage begins on the first day of the following month., • Paid time off (PTO) starts accruing day one of your full-time employment., • Holidays 6 holidays and 2 floating holidays per year, • 401(k) with company matching., • Long term disability supplied, • Short term disability supplied, • Life insurance supplied, • Healthiest you virtual health care paid by Interstate., • PPE reimbursement safety glasses and safety boot reimbursement, • Pet insurance we care about our furry friends!, • Employee discounts available on products and services, • Paid employee assistance program free 24/7 access to a guidance consultant regarding life challenges you or family member may face., • Paid health and well-being screening for employees and their spouse Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Interstate Companies is an equal opportunity employer, and we encourage all qualified and interested persons to apply for this position by submitting a resume for consideration.

Join our team in Glendale, AZ, a vibrant city known for its diverse culture, excellent amenities, and a welcoming community. We are seeking a dedicated professional to perform welding tasks, ensuring the highest quality standards are met. Properly set up and operate manual and automatic welding systems in accordance with work instructions and best welding practices. Position and adjust fixtures, attachments, or workpieces using visual acuity, hand tools, and measuring devices. Fine-tune processes within procedural limits to achieve conformance standards. Read and understand product and process drawings, procedures, weld symbols, and quality requirements. Perform proper pre-weld cleaning and handling of parts. Inspect hardware to ensure specifications are met through visual inspection and measuring devices. Maintain a high level of performance while following appropriate procedures and observing all pertinent safety rules and requirements. Keep work area and equipment organized, clean, and free of foreign object debris (FOD). Obtain and maintain all required qualifications and certifications in all appropriate metals. Perform setup and troubleshooting of welding equipment. Understand general and weld-specific safety issues. Provide guidance to less experienced welders as necessary. Assist with skill development, safety, and other training of welders. Collaborate with Engineering to develop weld processes and resolve weld issues. Troubleshoot all weld equipment in a team environment to maintain operational needs. High school diploma or equivalent. At least 8 years of welding or related experience, or demonstrated ability to perform the described responsibilities. Ability to become certified to AWS D17.1.2001. Proficiency in reading and understanding product and process drawings, procedures, weld symbols, and quality requirements. Demonstrated manual dexterity. Ability to perform basic mathematical calculations. Proficiency in reading and understanding blueprints. Working knowledge of machine shop mathematics. Effective English verbal, written, and interpersonal communication skills. Ability to work effectively with others and be a participative team player. Benefits PEAK's benefit offerings available for our associates include medical, dental, vision, Flexible Spending Account (FSA), Dependent Care Savings Account (DCA), and 401K plan. PEAK believes that taking care of our team is essential for success and we are proud to provide benefits that enhance both your well-being and your future. Additionally, our associates may be eligible for Paid Sick Leave as required by Federal, State, or local laws. Equal Opportunity Employer (EEO) PEAK Technical Staffing is committed to creating a diverse and inclusive environment and is proud to be an Equal Opportunity Employer. PEAK does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status, or any other characteristic protected by applicable law. All employment decisions are made based on qualifications, merit, and business need. We encourage all individuals to apply. Americans Disabilities Act (ADA) The physical and mental requirements described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Must be able to perform the essential physical functions of the position, including sitting, standing, walking, stooping, kneeling, and lifting up to 25 pounds, with or without reasonable accommodation.

Shift: Monday-Friday- 3pm-11:30pm.ESSENTIAL DUTIES AND RESPONSIBILITIES:.Assemble panel components using hand tools and power tools, such as drills, impact drivers, and grinders to assist in the assembly process.Follow detailed assembly instructions and diagrams to accurately construct frames.Conduc

Partners Personnel is looking for qualified forklift driver for local distribution center in Phoenix, with temp to hire opportunities!.Schedule: 4am to 12:30pm, Monday-Friday + Saturday.Perform a variety of physically demanding duties according to standard work instructions, such as manually loading

ESSENTIAL DUTIES AND RESPONSIBILITIES:.Perform assembly tasks for window components using hand tools and power tools such as drills, impact drivers, grinders and banding machines.Follow assembly instructions and diagrams to accurately construct windows.Conduct quality checks to ensure that products

Warehouse Worker / Forklift Operator.U-Haul is looking for friendly, energetic and motivated individuals who enjoy interacting with customers and take pride in a job well done.U-Box Warehouse Workers are responsible for ensuring that our valued customers' needs and expectations are met by providing

Material Handlers Temp To Hire.Metal Supply warehouse in Phoenix is looking for material handlers.Temp to hire for 1st shift 7:00 AM - 3:30 PM $19/hour.Job duties include verifying the accuracy of quantity and quality of incoming deliveries, labeling every product and placing them accordingly, keepi

Tempur Sealy is committed to improving the sleep of more people, every night, all around the world.As a leading designer, manufacturer, distributor, and retailer of bedding products worldwide, we know how crucial a good night of sleep is to overall health and wellness.Utilizing over a century of kno

Temporary To Perm Material Handler.Ryder is immediately hiring a temporary to perm material handler in Phoenix, Arizona.Warehouse positions pay weekly.Schedule: Monday-Friday 9:00am-5:30pm every other Saturday.We want the right warehouse associate to join us at Ryder and work in the safest supply ch

Location 5555 West Roosevelt Street, Phoenix, AZ, 85043, United States.Employee Type Regular - Hourly.

Material Handler Associate Jobs | Glendale AZ.Focus Workforce Management is seeking material handlers for a manufacturing company in Glendale, Arizona.Ideal candidates will be able to work with minimal oversight but willing to follow detailed instructions.Job duties may include cleaning and preparin

Material Handler (Evening/Weekends).Updike Distribution Logistics is seeking a reliable and motivated Material Handler to support our fast-paced warehouse operations.This role is responsible for receiving, processing, sorting, and organizing packages while ensuring accuracy, safety, and efficiency i

As a Pipefitter III, you'll operate as a journeyman-level expert in commercial mechanical service and installation, independently handling complex piping tasks for wet-side HVAC systems (hydronic heating, chilled water, steam, boilers, chillers, process piping) in buildings, hospitals, schools, and

We are seeking a dependable and safety-focused Material Handler with forklift experience to join a fast-paced warehouse team.This role is ideal for someone who takes pride in accuracy, efficiency, and maintaining a safe work environment.If you are experienced operating forklifts and enjoy hands-on w

Job Opportunity at Veolia North America.Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader.It offers a ful

The Material Handler is responsible for the safe, accurate, and efficient movement of raw materials, finished goods, and production supplies throughout their assigned department.This role supports daily operations by staging materials, loading/unloading trucks, maintaining inventory flow, and ensuri

The Material Handler is responsible for transporting and handling materials within a structural steel manufacturing facility.This role requires operating forklifts, overhead cranes, and other equipment to efficiently and safely move materials between designated locations.Operate forklifts, overhead

As a Warehouse Material Handler, you will ensure products get where they need to be.You will receive, store, select, pack, and ship warehouse inventory.Our Zone utilizes a Warehouse Management System so technology is required to perform this job.As an employee-owned company, our employees are key to

Founded in 1979, QEP is headquartered in Boca Raton, Florida.QEP is a leading global provider of high quality, innovative and value-driven flooring installation solutions.QEP manufactures, markets and sells a comprehensive line of installation tools, adhesives, and other flooring-related products fo

Apartment Maintenance Technician / Punch-List Technician 1099 Contractor.Are you an experienced professional looking for the flexibility to manage your own schedule and earnings, or interested in picking up additional work on the side? Do you take pride in delivering high-quality craftsmanship and

Auditor/Sit Down Forklift Operator With Warehouse Computer Experience - 3rd Shift.NSG Group/Pilkington North America has been part of the Nippon Sheet Glass Group since 2006.NSG Group is one of the world's largest glassmakers, manufacturing and distributing automotive and flat glass for the automoti

General Labor - Forklift Operator.Job Category: Operations Labor Requisition Number: GENER003714.Full-Time On-site Phoenix, AZ 85040, USA.Job Duties Including, but not limited to:.Unloading pallets, boxes, and bundles.Material handling/sorting pushing, pulling, picking, lifting, carrying, and filli

Shearer's Foods, founded in 1974 and headquartered in Massillon, OH, is a leading manufacturer of salty snacks, cookies, and crackers.Specializing in private label and co-manufacturing, Shearer's is the largest supplier of private brand salty snacks and second-largest supplier of private brand cooki

Electrical Technician 1099 Contractor.Job Posting: Electrical Technician 1099 Contractor.Company: Superior Contracting & Maintenance Location: Local Technician (Proudly serving AL, AZ, GA, FL, NC, OK, SC, TN, & TX).Are you a skilled electrical technician looking for the flexibility to control your

Inspects equipment and facilities for proper operation and working condition.Service and make repairs to heating, air conditioning and refrigeration equipment including fans, motors, radiator, thermostats, and dampers.Performs a variety of routine semi-skilled to skilled maintenance duties as requir

Job Category: Operations Labor Requisition Number: FORKL005146.Including, but not limited to:.Operate metal processing equipment using safe work habits.Observe processing operations so that malfunctions can be detected, and notify maintenance of any malfunctions.Lift raw materials, finished products

From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play.At OBE, the work of our

Maintenance Technician II- Streets.The City of Tolleson is known for its strong sense of community, preserving neighborhood character and livability amid regional growth.Despite our small size, we compete in economic and community development, workforce recruitment, and retention, guided by our Visi

First (1st) Shift Forklift Operator.At DHL, you will play a part in one of the world's most essential industries.As the world's leading contract logistics provider, we believe in doing the right thing, growing together, and delivering the difference.At DHL, you have a voice that matters and can make

Application review will take into account without limitation the following criteria: union membership and qualifications, and experience specific to the job description/duties as well as prior experience with Hoffman Structures.Operate construction hoist, to lift, move, loads, such as machinery, equ

Job Family Group: Vehicle Operations.Management Level: Individual Contributor.Flexible Work Option: No remote option; must work at a specified Cox location.Compensation: Hourly base pay rate is $16.The hourly base rate may vary within the anticipated range based on factors such as the ultimate locat

As a Forklift Operator with Liberty Packaging, you will contribute to the growth of our business by being a key player in safely moving goods and materials around a high traffic industrial environment.As a Forklift Operator you will help maximize efficiency of the production process by safely operat

Use manual and air riveting guns.Handling 48" x 96" sheets of aluminum.Handle electric and air compressor sanders.

Jacket Machine Operator - 3rd Shift (10:00pm - 6:00am).Quietflex Manufacturing, a member of Daikin Industries LTD.Quietflex Manufacturing is the leading manufacturer and supplier of flexible ductwork for residential and commercial HVAC systems, as well as fiberglass mats for industrial applications.

Location: 4239 N 39th Avenue, Phoenix, Arizona 85019.Work Shift: 8hr-3rd Shift (United States of America).The Forklift Operator is responsible for operating a forklift truck to stack and retrieve supplies and materials as well as following our company's Good Manufacturing Practices.Essential Duties

Abacus Staffing and one of our national partners are looking for forklift operators for immediate start in the Litchfield Park, AZ area.Position: Sit-down forklift operator.Shift: 2nd shift Monday-Friday 3:00pm-11:15pm.Previous forklift experience preferably in a food or beverage environment.Previou

This Forklift Operator role focuses on safely and efficiently operating a motorized forklift in a manufacturing and warehouse environment to move raw materials, finished products, and inventory.You will support production by loading and unloading trucks, transporting pallets to and from production l

Mary's Food Bank is currently seeking a Forklift Operator for our Surprise location.The Forklift Operator position reports to the Client Center Manager/Supervisor of the facility and assists with order verification, order filling, proper storage of food/non-food product, receiving, distribution, inv