Train operator jobs in Wayne, New JerseyCreate job alerts

Job DescriptionFabrication OperatorFairfield, NJFull TimeEntry LevelFabrication Operator in Fairfield, NJ 1st Shift Pay $17.50 per hour – $19.75 Based on experience Fulltime, Benefits, and Weekly Pay iBoost Talent is hiring for a Full-Time Fabrication Operator with Turret Punch Press experience in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-round employment with paid training. We offer: • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programPay $17.50 – $19.75 per hour based on experience 1st Shift Hours - 6:00am – 2:30pm Mon – Fri Job Summary: This position is responsible for safely setting up, operating, and shutting down various CNC fabricating, forming & VMC Machines. This position will have the responsibility to ensure the machine parts and production units are meeting or exceeding the required quality standards. Work assignments will be scheduled based on training proficiency. Duties and Responsibilities: • Set up and inspect the first piece against engineering drawings, ensuring accurate information transfer for efficient production runs., • Conduct routine quality control checks during setup and production, addressing any issues promptly., • Collaborate with the Supervisor and Team Leader to prioritize tasks according to the job board., • Organize, sharpen, and maintain tools and dies as needed., • Train operators based on Supervisor's instructions and plan for upcoming jobs by preparing materials and paperwork in advance., • Perform routine setup, troubleshooting, and machine maintenance, including cleaning and checking tools., • Communicate with management regarding any issues and the priority of upcoming setups., • Conduct basic quality checks and make necessary adjustments to ensure parts meet specifications., • Load and unload machines, verifying correct part processing., • Perform lower-level tasks such as filing and sanding as required., • Adhere to safety rules and maintain good housekeeping practices., • Report hazardous situations and participate in safety programs., • Lead or participate in Continuous Improvement Teams and maintain a clean workstation according to 5S procedures., • Support overall departmental and corporate goals by performing additional duties as assigned.Job Requirements:, • Basic math, communication, and troubleshooting skills., • Proficiency in using measurement tools (e.g., tape measure, calipers) and interpreting engineering drawings and BOMs., • Ability to follow directions and work independently with minimal supervision., • Flexibility to adapt to changing priorities and tasks., • Mechanical aptitude and problem-solving skills., • Experience in setting up and operating CNC equipment., • Team-oriented with the capability to train others in CNC techniques., • Reliability in attendance and punctuality., • Understanding of basic lean principles (5S, Kanban)., • Proficiency in English is preferred.Education and Experience:, • High school diploma, GED, or technical certification preferred., • Minimum of 4 years of experience operating specialized equipment or 3 years of CNC setup experience.Working Conditions/Physical Demands:, • Stand for 8 hours a day, performing coordinated hand movements and frequently lifting up to 50 lbs., with occasional lifting up to 100 lbs., • Tasks may involve repetitive motions, overhead reaching, bending, and exposure to sharp edges, dust, and high noise levels., • Work in a non-temperature-controlled environment; steel-toed shoes are required.

Job DescriptionBenefits: • Paid time off We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications • Minimum 2-5 years experience in manufacturing / job-shop environment, • Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc, • Knowledge of Mitutoyu MiStar 555 desired., • The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must, • Experience inspecting close tolerance parts (.001 to .0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc, • Perform job responsibilities according to internal process specifications and third-party requirements, • Utilize proper PPE, safety equipment, and follow safety procedures, • Assist support functions in root cause analysis, • Must be able to multi-task and work within deadlines, • Proactively work to improve efficiency and quality of products, • Use manual and automated measuring / testing equipment to assure product quality, • Cross-train with employees as needed based upon knowledge and experience, • Compliantly complete all written and/or electronic labor tracking documentation, • Report problems to appropriate resource and/or Coach, • Keep all shift operators informed on special problems involving operation or set up, • Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues, • Provide feedback to appropriate support functions, • Assist leading and support team initiatives We are constantly growing and always on the look-out for both experienced candidates and those looking to learn the trade. If you are a CNC programmer or operator, manual machinist or toolmaker, or you are just looking to get into the trade, please send us your resume.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance, • 401(k), • Dental insurance JOB DESCRIPTION Title: CNC Machine Operator 1 Reports To: Mold & Machine Shop Foreman Position Summary: The CNC Machine Operator 1 is responsible for the operation of the CNC equipment including lathes and mills. The job involves repetitive tasks, and employees may be required to monitor multiple machines.. Typical job duties include, loading materials into the machine, monitoring machine operation during use, machine maintenance, deburring, and inspecting machined parts. This role will also require simple maintenance tasks such as changing coolant and oil. An individual in this role is expected to be cross-trained to operate multiple machining centers and/or to perform functions in other departments as required. Essential Functions: • Basic understanding of CNC machining, including setup procedure, operation, and quality requirements., • Basic understanding of reading and interpreting manufacturing drawings and production documentation., • Math competency required. Ability to simple-perform calculations required for machine setup and adjustments to maintain required dimensions., • Basic understanding of measurement equipment including calipers, micrometers, and other instruments needed to conduct inspection of work product., • Understand and follow all Company and OSHA safety procedures., • Maintain a well-organized, safe and clean work area at all times., • Conduct and document preventative maintenance on the machines., • Maintain standards of quality during production., • Able to stand for more than 4 hours at a time., • Work a minimum of 40 hours per week and overtime as assigned., • Follow all safety guidelines as outlined in the company safety manual., • Cross-train and perform other duties as assigned based on organizational demand. Skills/Qualifications: • High School diploma or GED required, • CNC machining and/or manufacturing industry experience preferred., • Experience with Haas, Doosan, and Fadal controls is a plus, • Proficiency with the Microsoft Office Suite is a plus, • Impeccable attention to detail, • An analytical mind with good math skills, • Great communication and interpersonal abilities, • Must be reliable and trustworthy, • Able to lift 50 lbs. or more, • Able to stand for more than 4 hours at a time, • Collaborate with warehouse employees and other staff to ensure business goals are met

Job Description Title: Machine Electronic Control Technician Reports To:Director of Package Development Scope:Provide support for the development, installation, operation, troubleshooting and repairs of packaging equipment, relating to all aspects of machine controls.Responsibilities: • Perform all duties following organization SOPs and cGMPs in accordance with CFR 21, Part 11, 210 & 211., • Work as team member or leader on coordination, design, fabrication and start-up of new projects., • Assists with PLC programming support on all machine integration projects, training of in house personnel, and documentation., • Assist with the installation, troubleshooting and replacement of electric and electronic devices., • Train engineering staff, packaging line mechanics, machine operators and QA inspectors in functions of electrical/electronic devices and basic machine control functions., • Develop and maintain setup sheets, maintenance programs related to inspection systems., • Coordinate all PLC programming, setup of vision systems, data matrix and barcode scanners and related electronic equipment or field devices, including technical and validation documentation., • Design controls and systems relating to operator interface and monitoring systems., • Ability to learn and support new systems, e.g.: Package Serialization, Servos and Vision systems., • Work as team member or leader on design, fabrication of new projects or assemblies and training of operators and the technical support staff on this equipment., • Assist in creation/ review of validation documentation and related support documents such as engineering studies, equivalency statements and test documents on all packaging equipment., • Develop and implement relevant SOPs, Change Controls, Equipment Evaluations and Engineering Studies., • Support and interact, as required, with the Sales, Business Ops, Quality, Purchasing, as well as the Packaging, and the Technical Groups to ensure project status and goals are well communicated and expectations are understood and realized., • Conduct or support investigations of field complaints, deviations or non-conformation events., • Provide direct support to production and projects on all shifts as needed., • Participate in "Off-hours" requests for assistance, • Perform all other tasks assigned.Qualifications:, • Associates degree in Electrical or Electronic Engineering or equivalent experience preferred., • 5-8 years related experience in a packaging enviroment., • Thorough knowledge of all packaging equipment and functions., • Understanding of general industrial process and control systems., • Effective problem solving skills required., • Perform all tasks following industry standards and cGMP’s., • Must be able to work independently and as part of the team., • Must have a good command of the English Language, both written and verbal., • Effective communication and problem solving skills and required., • Proficient using technical software such as PLC, Servo, Vision, HMI, Controls and support software related to the performance of the job., • Proficient using office environment software such as QAD, Excel, Word, Project, and software related to the performance of the job.Physical Demands:, • Ability to lift and transport up to 30 pounds., • Ability to safely move around machines and equipment., • Ability to work in a standing position for 100% of the time or to work in a sitting position for 100% of the time., • The person in this position is required to communicate to employees in all position levels. He/she must be able to exchange accurate information in these circumstances., • Must be able to wear all Personal Protective Equipment (PPE) and gowning as required., • Ability to tolerate fumes from heat and print processes typical in the packaging environment

This position is responsible for the safety, the productivity and the quality mindset of the shop floor employees. The position is responsible for assuring their designated team is achieving productivity goals, adhering to company initiatives and culture throughout the shop floor. In this role, a candidate should expect to spend a majority of their time on the shop floor with the shop floor employees. Coaching, mentoring, training and communication are key elements of this job. Responsibilities include: • Responsible for communicating to employees, providing a link between what they do and what the business needs, • Teach lean concepts and actively engage employees to improve speed, quality and reduce cost, • Participate and champion continuous improvement events, • Coach and guide employees about proper conduct and behaviors in line with company culture, • Provide feedback and maintain documentation regarding employee behaviors (good & bad), • Ensure cell employees adhere to company policies (e.g. following operating instructions, safety protocols, etc.), • Establish and enforce policies (manufacturing, quality, safety), • Responsible for employee time and attendance, • Audit overtime usage and seek improvements to reduce as necessary, • Optimize resource allocations manpower & equipment, • Establish and sustain a 5S culture, • Assure employees have adequate training to achieve quality and productivity requirements, • Team building, • Use problem solving and critical thinking skills to overcome manufacturing obstacles, • Encourage problem solving at the operator level, • Lead and participate in Gemba walks, • Investigate safety, quality or productivity issues, • Create and assure that KPI's are being tracked and improvements are sought, • Manage and communicate resource exceptions (time off / coverage), • Produce parts to meet master production schedule requirements takt time, • Responsible to expedite jobs outside of cell/shared resources, • Provide timely commitments on WIP and ensure that all commit dates are on track and met., • Responsible for WIP quantities and accuracy. Qualifications: College helpful but not required Supervisor experience required MS Office, ERP systems helpful Additional Information: • Leadership skills: Strong communication with subordinates, peers and management. Ability to motivate others. Ability to train and delegate other. Effectively provide feedback to reports and peers, • Be accountable for the performance of the team's metrics and its members' behaviors, • Mathematical skills; calculating figures, formulas, • Organize, plan and prioritize work in a fast paced, dynamic environment, • Critical thinking, decision making, problem solving analyze information and choose best solution, • Information gathering, • Monitoring and reviewing available data (i.e. production performance or quality data) to detect and assess problems, • Lean or six sigma training or experience, • Ability to seek out opportunities independently and offer solutions, • Must be comfortable in a manufacturing environment, • Must be able to work in an office environment, i.e., sitting for long periods of time; extensive computer work (typing), • May be required to lift up to 50 lbs., • May require some travel; i.e., car, train, plane We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

WIN Waste Innovations is looking for a Plant Operator who is confident and enthusiastic individual will maintain a safe, environmentally compliant, and efficient boiler operation including maintaining productive boiler combustion, steam flows, and optimize generation, burnout, in-plant power combustion, and flue gas emissions. • Monitor plant operational and emissions data., • Detect and respond to changing conditions with regard to maximizing plant safety, environmental compliance, and efficiency., • Coordinate, direct, and train Assistant Utility Operator, Utility Operator and Assistant Plant Operator and other plant personnel, as required., • Perform equipment inspections during outages., • As needed, perform physical duties associated with maintaining boilers and various equipment within the plant., • Maintain positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management., • May lead, guide and direct 2-5 employees to maintain safety and in operation of plant., • As requested, "Fill in" as acting Shift Supervisor., • Two years working in a power plant environment as an Assistant Plant Operator (APO) or comparable position; or 5 years related experience or training in power plant environment, • Mechanical skills sufficient to perform such tasks as replacement of shear pins, valve repacking, and equipment inspections, • Skills, experience, and knowledge sufficient to acquire ASME QRO Provisional license. (ASME: American Society of Mechanical Engineers), • Math skills sufficient to complete required job functions, • Knowledge and understanding of the operation and control of a steam generating power plant, • For all Massachusetts facility's, a 2nd Class Engineers license is required., • Climb and walk on heights often greater than 4 feet, • Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations., • Lift moderate to heavy material 50 lbs., • Move about all areas of the plant, including catwalks, deck grating, wet and muddy areas, and uneven surfaces., • Operate a 1.5-inch fire hose operating at 125 PSI line pressure to the extent required to extinguish fire, • Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lbs. portable units, • Operate other equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment, • Access confined spaces and pressure vessels through standard 12" by 16" manways Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Noise in work environment, • Stand, • Sit for prolonged periods of time, • Walk, • Handle tools, equipment, fine motor skills, • Reach with hands and arms, • Climb and walk on heights often greater than 4 feet, • Stoop, kneel, bend, push, pull, crawl, • Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations, • Lift 50 lbs., • Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces, • Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise, • Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire, • Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units, • Access confined spaces and pressure vessels through standard 12" by 16" manways Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue: • Negative pressure respirator, • Positive pressure respirator, • Self-contained breathing apparatus (steel or composite bottle), • Hardhat, • Approved safety shoes, • Eye protection, • Rubber suit and gloves, • Chemical resistant suit, • Heat resistant outerwear, • Flame resistant outerwear, • Approved hearing protection, • Gloves, • Safety harness, • Industry leading benefits, • Multiple and flexible medical plans, • Outstanding PTO program, • Floating Holidays, • Strong 401k program and company match, • Tuition reimbursement plan, • College loan reimbursement, • College scholarship program for dependents, • Parental Leave Program, • Inclusive culture, • Employee engagement events, • Employee resource groups WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream. At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.

Job DescriptionDescription: JOB OVERVIEW Overall responsibility is to provide mechanical, electrical and controls support to packaging as needed, including troubleshooting, preventative maintenance (PM), changeover, modifications, and repair of line equipment to ensure operating efficiently; within FDA CFR 111, 117, 210 & 211 regulated manufacturing facility. RESPONSIBILITIES: Essential Functions: · Perform preventative maintenance on all machinery in the packaging area. · Set up production lines as instructed by daily management tracker. · Effectively and accurately troubleshoot and make routine adjustments and repairs to equipment and machinery to maintain production and maintenance schedules. · Disassemble machinery and equipment to determine worn or broken parts, repair or replace necessary parts by using new parts from stock or by fabricating manufacturing parts to machinery or equipment. · Continually check equipment and machines to proper function for quality, safety, and quantity. · Assembling, installing, and maintaining mechanical systems, machinery, and equipment. · Maintaining a schedule for inspecting, servicing, and testing machinery. · Cleaning, repairing, and installing equipment and parts as needed. · Operating a variety of hand and power tools. · Maintaining a clean and organized work area. · Manage the Operators · Train the Operators · Engage in effective communication with the official technician of the equipment they need assisting for troubleshooting or diagnosis. · Capable of performing electrical troubleshooting on the equipment. · Read and interpret documents such as SOP / GMP, Safety Rules, Operating and Maintenance Instructions. · Diagnose and repair electrical faults (PLC, fuses, relays, etc.) · Uncrating new equipment. · Perform S.A.T & F.A.T in new equipment. · Train Operator and mechanics in new upcoming equipment. Nonessential Functions/Demands: · Cover the mechanic manager function when applicable. · Uncrate machinery · Assist in maintaining a safe work environment in the production areas by performing routine audits and reporting results. · General understanding of customer specifications. · Hands on in running equipment. · Attention to detail. · Organized, motivated team player. Requirements: QUALIFICATION REQUIREMENTS: · High school diploma/GED or Technical Degree. · 5+ years’ experience as maintenance mechanic. · Knowledge and adherence to GMP’s. · Knowledge of packaging machinery, specifically bottle, pouch, cartoning, thermoform and cold form blisters. · Ability to ready and interpret equipment manuals and blueprints. · Excellent interpersonal, communication and organizational/time management skills. · Ability to prioritize work assignments in a fast-paced work environment. REPORTING RELATIONSHIP: · Manager: Mechanic Manager · Managerial Responsibility: N/A PHYSICAL/MENTAL DEMANDS: · Must be able to remain standing for up to 90% of the time. · Must be able to lift-up 10 pounds frequently and 50 pounds on occasion. · Continually required to talk or hear. · Continually required to utilize hand and finger dexterity. · While performing the duties of this job, the noise level in the work environment is usually moderate. · The person in this position will need to occasionally kneel, climb, crawl, climb and/or reach to complete job duties. · The person in this position is required to communicate to all other departments and must be able to exchange accurate information in these circumstances.

CMA CGM Group - - Responsibilities: Receive and unload shipments and verify against bills of lading; Sort and store products in designated locations; Pick and pack orders for shipping; Operate warehouse management system (WMS); Maintain a safe, clean, and organized warehouse environment.

UPS - 280 North Midland Avenue - Responsibilities: Load and unload packages from UPS trailers or trucks; Sort packages to ensure correct destination; Ensure packages reach the right destination; Collaborate with team in a fast-paced environment; Maintain attention to detail.

Aerotek - - Responsibilities: Fabricate and assemble metal items using cutting, burning, and welding techniques; Perform production welding on repetitive parts; Inspect welds and finished components for quality; Set up, operate, and maintain welding equipment; Maintain a clean and organized work ar

Responsibilities: Stock drugs, supplies, and over-the-counter merchandise in the pharmacy area; Provide a high level of member service; Follow safety and security procedures; Assist in the Pharmacy as needed and directed by the Pharmacy Manager; Operate equipment and move pallets/stocking duties.

Aerotek - - Responsibilities: Receive, inspect, and store incoming materials and products; Pick, pack, and prepare orders for shipment; Accurately track inventory using RF scanners or warehouse management systems; Load and unload trucks using pallet jacks, hand trucks, or forklifts; Maintain cleanl

Aerotek - - Responsibilities: Measure dimensions and tolerances using calipers, micrometers, and gauges; Assemble pumps, blowers, and motors; Crimp, strip, and connect wires and cables; Perform daily maintenance on measuring tools and calibration; Follow diagrams or schematics and perform minor sol

Marmon - 107 North 5th Street - Responsibilities: Assemble, test, and install electrical harnesses according to engineering drawings and specifications; Read and interpret wiring diagrams and wiring documentation; Use manual and powered tools for stripping, crimping, soldering, and connector assembl

Pay Increases & Pet Care Training Programs.

PrideStaff - 574802 [Production Operator / Assembly Line Worker] As an Assembler at PrideStaff, you'll: Perform mechanical assembly which is typically highly complex; Be responsible for fitting, aligning or adjusting of components and/or assemblies to close tolerance; Perform troubleshooting, tear d

Aerotek - - Responsibilities: Crimping, stripping, and connecting wires and cables; Assembling pumps, blowers, and motors; Utilizing hand tools and doing bench work; Ability to follow diagrams or schematics; Minor Soldering.

Warehouse Associate - HVAC Products.Carrier Enterprise, a leading national distributor of residential and light commercial HVAC products, is seeking a dedicated Warehouse Associate.Join a team that excels in providing top-notch HVAC/R products, parts, and supplies through licensed HVAC/R dealers and

Aerotek - - Responsibilities: Crimp, strip, and connect wires and cables; Utilize hand tools and bench work; Follow diagrams or schematics to assemble electronics; Perform minor soldering; Work a full-time permanent role with potential overtime.

Albertsons - 125 Franklin Turnpike - Responsibilities: Stock and organize merchandise on shelves; Ensure store appearance is stocked, clean, and bright; Use store tools (box cutters, pallet jacks, etc.Provide friendly, courteous service; Potentially work as cashier or checker.

Responsibilities: Stock and straighten merchandise for sale in the warehouse; Communicate with supervisors to determine merchandising plans and priorities; Assist members by loading large items and directing them to products; Operate equipment such as pallet jacks and cardboard balers; Ensure proper

Aerotek - - Responsibilities: Assemble components and subassemblies according to drawings and operation sheets; Perform soldering and tooling operations; Handle and maintain tooling and assembly equipment; Accurately track production counts, cycle times, and quantities; document work progress; Assi

Walmart - 235 Ridgedale Ave - [Retail Associate / Store Receiver / Team Member / up to $21-hr] - As a Stocker / Unloader at Walmart, you'll: Ensure customers can find all of the items they have on their shopping list; Unload trucks; Move and sort products in the backroom; Stock products on shelves;

Aerotek - - Responsibilities: Operate and monitor cable manufacturing equipment; Ensure the quality of the cable output; Set up machines according to order specifications; Input order specifications into a computer; Troubleshoot equipment during operations and breakdowns.

ABF Freight - - Responsibilities: Pickup and delivery of cargo within proximity of the consolidation/distribution center; Load and unload cargo and operate a forklift as needed; Perform trailer checks, tractor setup, and complete routine paperwork; Exercise independent judgment regarding trailer ha

Aerotek - JobID: JP-005853596 [Maintenance Technician / Electrical Technician] As an Electrical Worker at Aerotek, you'll: Perform electrical troubleshooting in the assigned manufacturing area; Perform programming and troubleshooting PLCs, Servos, and robotics to minimize downtime; Manage machine vi

Marmon - 107 North 5th Street - Responsibilities: Set up machines to start a production cycle on the extruder/ tower system; Load raw materials and color concentrate into the extruder hopper per job specifications; Operate and monitor extrusion machinery and related equipment to ensure smooth produc

Aerotek - - Responsibilities: Set up and operate saw cutting machines to cut materials such as metal, plastic, wood, or other materials according to production requirements; Read and interpret blueprints, work orders, drawings, and measuring instruments; Measure and verify dimensions to ensure accu

PROMAN Staffing - - Responsibilities: Operate machines and perform change-overs; Conduct quality checks and label production; Read schematics/blueprints and troubleshoot equipment; Cross-train and work independently or with a team; Lift up to 60 pounds.

Abacus Service Corporation - 700 Parsippany Road - Responsibilities: Blowing all holes in buckets and nozzles to clear the residue inside; Load and Wash all blown parts in part washer; Fill out all BOT related to each part and each work orders; Maintain tools and measuring instruments supplied by co

Aerotek - - Responsibilities: Set up and operate saw cutting machines to cut materials according to production requirements; Read and interpret blueprints, work orders, drawings, and measuring instruments; Measure and verify dimensions to ensure accurate cuts and product quality; Inspect finished p

Abacus Service Corporation - - Responsibilities: Set up and operate CNC and/or EDM machines for machining operations, including fast hole drilling and graphite shaping; Study mechanical drawings and set-up instructions to determine machining requirements and procedures; Install work holding devices

Kellermeyer Bergensons Services - 600 Washington Avenue - Responsibilities: Clean restrooms and break areas (indoor/outdoor); Sweep, mop, dust, and remove trash; Keep walkways clean and tidy at all times; Clean totes and other items; Perform deep cleaning as needed.

Aerotek - - Responsibilities: Disassemble, modify, and reassemble products; Engrave and print patterns on materials; Set up production equipment and adjust controls; Conduct visual inspections for defects; Mount materials or workpieces onto production equipment.

PrideStaff - 574803 [Production Operator / Machinist] As a Machine Operator at PrideStaff, you'll: Set up fully automated computer controlled machinery; Respond to work order requests; Coordinate material requirements with production control and stock room; Interface with production control and insp

Marmon - 107 North 5th Street - Responsibilities: Set up machines and materials prior to production runs; Monitor machine operations and production output; Perform routine quality checks during production; Report any equipment malfunctions or safety hazards to supervisors; Maintain accurate producti

Participate in required safety and operational training.

Applying for this role online is quick and easy and you could even schedule your first day of work within 20 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and sc

The pay rate is $25-30/hour based on, but not limited to, skill sets, experience and training, licensure and certifications.

Warehouse Associate/Scanning Resource.We are seeking a reliable and hardworking Warehouse Associate to support daily warehouse operations in Saddle Brook, NJ.The ideal candidate will assist with receiving, storing, picking, packing, and shipping materials while maintaining a safe and organized work

This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits and all other privileges, terms and conditions of employment.

Welcome to MCN Distributors - a Rheem Company.We are looking for a Warehouse Associate.They will be a key part of our operations team, responsible for ensuring the safe and accurate handling of HVAC equipment and materials.This role supports the flow of inventory through receiving, storage, and ship

Stocks and straightens merchandise for sale in the warehouse.Provides a high level of member service.Spots for forklift drivers to keep people out of the fall-danger zone.Follows all safety and security procedures, such as lifting properly, correct compactor operation.Follows merchandising standards

Cross-train and perform Shipper/Receiver duties such as: Print daily sales receipts and cross-check with computer software to ensure accuracy. Cross-train and perform Cutter/Slitter duties such as: Set-up and operate cutting machines and branding machines, Read work orders to determine dimensions of