Trabajos quality inspector en Austin, TexasCrear alertas

Job Description We are seeking a Quality Control Inspector, Assemblers & Machine Operators to inspect electronic systems, assemblies, subassemblies, components, and parts to ensure they conform to specifications. This role focuses on reliability and workmanship standards through visual and measured inspection methods. Key Responsibilities • Perform visual inspections of electronic cards, sub-assemblies, systems, and units to verify workmanship and reliability standards., • Use inspection tools and manufacturing aids such as gages, templates, microscopes, and other devices to confirm product conformance., • Verify that all required process operations have been completed prior to acceptance., • Accurately enter quality results into electronic and/or manual tracking systems., • Identify and report unusual product defects and escalate when process yields fall below acceptable levels., • Provide timely feedback to manufacturing when non-conforming product is found., • Complete required inspection documentation and other administrative activities accurately and on time., • Perform process audits and assist manufacturing with interpretation of quality/workmanship standards., • Assist with disposition of non-conforming materials/product (hold, rework, scrap, etc.) following established procedures. Apply now and one of our recruiters will reach out to you! Balance Staffing is proud to be an equal-opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law. Benefits: • Dental insurance, • Health insurance, • Vision insurance Work Location: In person Company DescriptionBalance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law.Balance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law.

Overview: Lamb's Tire & Automotive Join a Team That Respects Your Skill and Fuels Your Future! Lamb's Tire & Automotive is seeking a highly skilled and experienced Automotive Technician to join our team. If this is you and you’re ready to take the next step in your career, we want to hear from you. Join Lamb's Tire & Automotive and become a valued member of our team. Apply now!! Lamb's Tire & Automotive operates multiple locations in the Central Texas! Lamb's Tire & Automotive is part of Sun Auto Tire & Service, a leading provider of automotive services, operating under a family of trusted brands across the country. From coast to coast, we’re proud to serve our communities with integrity, excellence, and a commitment to developing our team As a Senior Automotive Technician, you will play a key role in diagnosing and repairing customer vehicles with accuracy, efficiency, and attention to quality. You’ll utilize your technical expertise to perform advanced diagnostics and repairs while ensuring every vehicle meets MAP guidelines and dealership, manufacturer, and company repair standards. Incredible Pay Awaits: $30.00/Hr. – $45.00/Hr. (flag rate), Depending on your experience and certifications. Benefits: • Closed Sundays, • Competitive Bi-Weekly Pay, • Tuition Reimbursement, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy, • Performs complex and heavy-duty repairs, • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers, • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file, • Follows all safety procedures and reports any concerns to direct supervisor, • Ability to work flexible schedules, including weekends as needed. But never Sundays! Other duties as assigned by direct supervisor, • Adheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee Handbook Qualifications: • Previous automotive technician / mechanic experience required, • ASE certifications in lieu of experience, • Ability to demonstrate proper use of computerized equipment for diagnostics, • Valid Driver’s license, • Must be at least 18 years of age, • Possess State Inspector License or ability to obtain a State Inspector license (in applicable locations) within 30 days of hire date, • High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands: The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: • Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building, • Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently, • Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently., • Communicate with customers and shop personnel, • Vision sufficient to detect color, depth, and re-focus We are committed to providing reasonable accommodations to employees with disabilities upon request Get paid like a pro, treated like a leader, and still enjoy your Sundays. Apply today to start your journey with Lamb's Tire & Automotive! Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionWho is Sonar? Sonar is driving the future of agent-centric software development. As the leader in AI code verification and governance, we solve a critical problem: ensuring that software generated by AI-assisted developers or autonomous agents is reliable, secure, and maintainable. Integrating seamlessly with Claude Code, Codex, Cursor, GitHub Copilot, Gemini, and Devin, we help over 75% of the Fortune 100 build trusted, reliable, compliant software. Customers who use Sonar are 44% less likely to report an outage due to AI-generated code. We believe code verification is the critical missing link in the Agent-Centric Development Cycle (AC/DC). Industry giants like Nvidia, ServiceNow, Booking.com, Goldman Sachs, AstraZeneca, and Ford Motor Company count on us to provide independent, explainable, consistent review and governance of their AI-generated code via products like: • SonarQube: The world’s leading AI code review and verification platform., • SonarQube Foundation Agent: Currently topping the leaderboards for agentic software repair., • SonarSweep & Sonar Context Augmentation: Providing the enterprise-grade context and constraints agents need to be truly effective. Our team operates across global hubs in Austin, Bochum, Dubai, Geneva, London, Singapore, Tokyo, and Washington D.C. We move with a mindset we call CODE: • Committed to our customers and community., • Obsessed with quality., • Deliberate in our decisions., • Effective as one team. With over $400M in revenue and profitable, fast-paced growth, we are building the backbone of the AI software revolution. If you’re hungry to have an impact, want to build at a fast pace, and ready to work at the forefront of AI, we want to hear from you. About the Role Sonar is seeking a Senior Sales Engineer to serve as the technical voice of our AWS go-to-market motion and the trusted advisor to enterprise customers evaluating Sonar's code quality, SAST, secrets detection, and AI code assurance capabilities on AWS. This is a senior pre-sales position for someone with deep, hands-on knowledge of the AWS ecosystem who can translate Sonar's value into technical wins — leading discovery, demos, proofs of value, and architecture conversations alongside AWS account teams and adjacent ISV partners. The Senior SE will partner closely with Account Executives and AWS Partner Solution Architects to drive technical validation of Sonar in customer environments — from first technical discovery through POC execution to closed-won and deployment. This individual must be equally fluent in live technical demonstration and executive business narrative, capable of representing Sonar in customer briefings, AWS-led technical workshops, and field events at the highest levels of the sales cycle. Technology Tools Cloud Platform: AWS (Compute, Storage, Containers/EKS, CodeCatalyst, CodePipeline, CodeBuild, Bedrock, Security Hub, GuardDuty, Inspector, Secrets Manager, IAM Identity Center) Marketplace & Co-Sell Motions: AWS Marketplace (SaaS Contracts, Private Offers, CPPO), ISV Accelerate co-sell, Partner Central opportunity registration Certifications: AWS Solutions Architect Associate or Professional, AWS Specialty Certifications (Security, DevOps Engineer Professional) preferred DevOps Platforms (analysis ingress): GitHub, GitLab, Bitbucket, Azure DevOps Adjacent ISV Ecosystem: Snyk, JFrog, HashiCorp, Datadog, Mend, Checkmarx, Anthropic / OpenAI (LLM code-gen providers integrated with Bedrock) What You Will Do: Partner with Account Executives as the lead technical resource on AWS-aligned enterprise opportunities — driving discovery, qualification, technical demos, and proof-of-value execution from first call to closed-won. Design and deliver tailored Sonar demonstrations against the customer's actual AWS environment, CI/CD pipelines, and use cases — covering SonarQube Server, SonarQube Cloud, AI Code Assurance, and AI CodeFix in realistic enterprise contexts. Scope, lead, and bring to successful technical close customer POCs and pilots, including those funded through AWS programs (Innovation Sandbox, MAP, ISV Accelerate), ensuring each engagement produces clear technical win criteria and measurable customer outcomes. Serve as the technical voice in joint AWS account planning and co-sell motions — collaborating with AWS Partner Solution Architects and account teams to align on customer architecture, position Sonar within AWS-native developer and security workflows, and accelerate AWS Marketplace transactions. Capture and channel customer feedback, competitive intelligence, and AWS service developments (Bedrock, CodeCatalyst, Security Hub, agentic developer tooling) back to Product Management and Alliances leadership to inform roadmap and GTM priorities. Position multi-ISV solutions that combine Sonar with AWS-native services and complementary partner tools — secrets management (HashiCorp Vault), SCA (Snyk, Mend), artifact governance (JFrog), and observability (Datadog) — in customer-facing architecture conversations and solution briefs. Represent Sonar in customer technical workshops, AWS-led field events, Executive Briefing Center sessions, and industry events including AWS re:Invent, AWS Summit, and KubeCon. The Experience You Will Need: 7–10 years of pre-sales / sales engineering experience at an enterprise software vendor, with at least 3 years selling alongside or into the AWS ecosystem; DevSecOps, application security, or developer tooling background strongly preferred. Hands-on working knowledge of the AWS service portfolio across compute, containers, developer tooling, AI/ML (Bedrock), and security, with the ability to whiteboard customer architectures live. AWS Solutions Architect Associate certification required; Professional and/or specialty certifications in Security or DevOps Engineer Professional strongly preferred. Demonstrated track record of owning the technical win — running discovery, delivering compelling demos, scoping POCs to measurable success criteria, and handling technical objections through to closed-won. Working familiarity with AWS Marketplace transactions and co-sell motions (Private Offers, ISV Accelerate, Partner Central opportunity registration). Executive-level written and verbal communication skills with the ability to flex from hands-on developer conversations to C-suite business-impact narratives in the same engagement. Based in or willing to relocate to Austin, TX, with the ability to engage in person with customers, AWS, and partner teams across the Austin tech corridor, and travel up to 30–40% for customer meetings and field events. Preferred Skills: Prior SE experience at a DevSecOps, SAST, SCA, or developer-tools vendor with a meaningful AWS co-sell motion. Comfort building and maintaining demo environments and reference integrations — including hands-on work with GitHub Actions, GitLab CI, AWS CodePipeline/CodeBuild, and container-based deployments on EKS. Experience co-selling with AWS Partner Solution Architects and account teams, including joint customer calls, joint architecture sessions, and Marketplace Private Offer execution. Familiarity with Sonar's product line (SonarQube Server, SonarQube Cloud, SonarQube for IDE, AI Code Assurance, AI CodeFix) and how SAST, secrets detection, and Clean Code methodology intersect with AWS-native developer and security services in complex enterprise environments. Experience representing a vendor at AWS-led customer events, Executive Briefing Center sessions, and major industry conferences such as AWS re:Invent and AWS Summit. In-office culture We're intentional about this. We believe the best teams are built in the room together. Three anchor days — Mondays, Tuesdays, and Thursdays — create the collaboration rhythm that makes a hub office worth having. Candidates need to be genuinely based in the location the role is posted — if that's not where you are today, we're happy to support relocation for the right person. We value diversity, equity, and inclusion At Sonar, we believe that our diversity is our strength. We are a global company that values and respects different backgrounds, perspectives, and cultures. We are committed to fostering a diverse and inclusive work environment where everyone feels valued and empowered to contribute their best. We are proud to be an equal opportunity employer and welcome all qualified applicants, regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you need any accommodation, please reach out to us at hiring@sonarsource.com. All offers of employment at Sonar are contingent upon the results of a comprehensive background check and reference verification conducted before the start date. Applications that are submitted through agencies or third party recruiters will not be considered. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. As an Electrical Quality Inspector at Allen Control Systems (ACS), you are the final line of defense for the Bullfrog™ autonomous gun turret system. You will be responsible for ensuring that every wire harness and Printed Circuit Board Assembly (PCBA) meets the rigorous standards required for tactical edge defense hardware. This is not a "check-the-box" role; you are expected to provide real-time feedback to production and engineering to eliminate bottlenecks and prevent quality escapes. This is an onsite position. You will initially work from the current facility in Austin and will transition to our new Pflugerville, TX location upon completion of the facility move, anticipated in Q3/Q4 2026. What You’ll Do Technical Inspection: Perform detailed visual and mechanical inspections of complex wire harnesses and PCBAs to IPC-A-610 and IPC/WHMA-A-620 Class 3 standards. System Ownership: Document inspection results, manage non-conforming material, and verify that all assemblies match the latest engineering revisions and BOMs. Root Cause Analysis: Collaborate directly with Engineering and Production to identify the source of workmanship defects and implement immediate corrective actions. In-Process Audits: Conduct "floor-side" audits of assembly techniques, including crimping, soldering, and component placement, to ensure quality is built-in from the start. What You’ll Need Experience: 3+ years in quality inspection within a high-stakes electronics manufacturing environment (aerospace, defense, or robotics preferred). Certifications: Current or prior certification in IPC-A-610 and/or IPC/WHMA-A-620 is required. Technical Literacy: Expert ability to read and interpret complex electrical schematics, wire run lists, and mechanical drawings. Systems Expertise: Experience using ERP systems (Odoo highly preferred) for quality documentation and inventory management. Operational Grit: A "no-excuses" approach to quality. You must be comfortable making difficult "reject" calls to prioritize the mission and product reliability. You’ll Stand Out Startup Scaling: Experience establishing quality gatekeepers in a rapidly growing production environment. Specialized Testing: High-reliability harnesses and circuit boards automated testing techniques Lean Mindset: Practical experience applying quality improvements without unnecessary corporate bureaucracy. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Headquartered in Conyers, Georgia, Batchelor & Kimball takes pride in partnering with our clients to deliver excellent results from engineering and construction to operations and maintenance. There’s not a lot of BS here, and not a lot of turnover. Good people work at Batchelor & Kimball. We’re good at our jobs, and good to each other. We have high expectations because the work is challenging, but we know the most valuable thing about the work is the people who do it. If this sounds like a good fit for you, we’d like to meet you! We’re looking for someone to support our QA/QC team in Austin, TX. The ideal candidate will perform critical tasks. We will rely heavily on this person to maintain strict confidentiality and possess strong attention to detail skills and have desire to do non routine tasks. What You’ll Do: • Deliver quality record development (hydro forms/civil forms etc.) for review and retention, • Maintain effective information storage systems to enable easy retrieval of QA/QC documents and data, • Support regular compilation and reporting of quality related QA/QC data for management reporting and review, • Maintenance of all records demonstrating full traceability of changes to construction documents, • Inputting data into software programs, and compiling data books for final turnover to clients, • Must be able to work independently while demonstrating strong qualities and integrity What you’ll need (minimum qualifications): • Strong computer application skills, • Minimum 3 years and above field experience with ability to read and interpret mechanical, structural & isometric drawings., • Plan and perform work activities independently, • Ability to prioritize, plan, perform and communicate activities in both written and verbal form., • Ability to manage multiple tasks with strong attention to detail., • Experience working with quality management systems involving ASME, AWS and AWWA mechanical codes., • Computer literacy applied to data management, collection, and reporting., • Valid driver’s license., • Experience in Quality Control activities on assigned projects at construction sites performing Welding, HVAC, Plumbing services., • Knowledge pertaining to welding (pipe, structural), pressure testing (pneumatic, hydrostatic), coating (paint, plating) and torquing (bolts, flanges, valves), • Process paperwork regarding material testing/inspection and QA/QC for NDE, Insulation, Ducting services., • Working onsite at field locations Good to have: • Ability to work in a fast-paced construction environment, • Aptitude to learn new systems, • Ability to train staff on necessary operations, • Certification or extensive experience as a CWI, API, AI or NDE inspector. NOTE: This job description is not intended to be all-inclusive. The duties described may be changed or reassigned at the discretion of management, and the employee may be required to perform duties that are not listed in the job description. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #BandK #Onsite Type Description here

Job DescriptionDescription: Position Description: The Room Inspector inspects rooms after cleaning, identifies corrections, communicates room status, and helps support quality, training, and guest satisfaction. Key Responsibilities • Inspect cleaned guest rooms and bathrooms for cleanliness, condition, supplies, and presentation., • Verify that rooms meet hotel standards before being released for guest arrival., • Report maintenance issues, damaged items, missing items, or safety concerns promptly., • Communicate room status and priorities with housekeeping leadership and the front desk., • Provide professional feedback and coaching to room attendants when needed., • Assist with touch-ups, room corrections, cleaning support, or special projects as needed., • Follow hotel safety, sanitation, key-control, and guest privacy procedures., • Help maintain consistent quality standards throughout assigned guest room areas. Equal Employment Opportunity Statement We are an Equal Employment Opportunity employer and consider all qualified applicants without regard to any legally protected status. Requirements: • Prior hotel housekeeping or room attendant experience required or strongly preferred., • Strong attention to detail and understanding of room cleanliness standards., • Ability to communicate clearly and professionally with team members and other departments., • Ability to provide respectful coaching and feedback., • Ability to use room status systems, radios, mobile devices, or inspection tools as required., • Flexible schedule required, including weekends and holidays., • Must be reliable, punctual, and quality-focused. Schedule Flexible schedule required. Must be available to work weekends, holidays, mornings, evenings, and overtime as needed based on hotel occupancy, staffing needs, and business levels.

Job Description We are seeking a qualified and motivated Line Inspector to join our team. Line inspectors constantly perform quality checks on materials and finished goods while at a designated location on the production line. They record their findings accurately and escalate quality‑related issues to the Bottling, Maintenance, and Quality teams. Responsibilities: · Visually inspect product and packaging materials for defects, communicating critical defects and trending issues to department leadership and coworkers. · Record defective product and material information on appropriate documentation. · Maintain good manufacturing practices to avoid gluten contamination. · Report any instance of gluten cross contamination to Quality Assurance leadership. · Support and complete projects assigned by department leadership. · Work overtime and weekends when required. Physical Requirements: · Required to stand in place for extended periods in a manufacturing environment. · Ability to identify and distinguish colors and small, faint print and objects at close distance. · Ability to frequently lift/lower, push, carry or pull up to 50 lbs. · Ability to respond quickly to sounds and maintain situational awareness. Will consider employees who apply to job postings if they meet the position’s minimum criteria, have held their current position for at least 6 months and were not subject to disciplinary action in the past year. Requirements Qualifications: · High school diploma or GED. · Previous experience in QA preferred. · Strong attention to detail and accuracy in record keeping. · Knowledge in O365 and Microsoft Excel a plus. Benefits • Comprehensive medical, dental, and vision insurance, • Company-paid life and disability insurance, • Voluntary insurance plans, • 401(k) plan with company match, • Paid time off, including vacation, sick, and flex time, • Paid Parental Leave, • Adoption Assistance Program, • Dependent Care Flexible Spending Account (FSA), • Health Savings Account (HSA), • Lifestyle Spending Account (LSA), • Financial Wellness Benefit, • Employee Assistance Program (EAP)

Job DescriptionQuality Control InspectorPay: $18.00 per hour Location: Austin and San Marcos, TX 78725 Schedule: Variable (32 hours per week) Start: Ongoing - hiring on a rolling basis for current and upcoming starts Job Type: Contract Pay Frequency: WeeklyAbout the RoleShareSTAFF is hiring Quality Control Inspectors for ongoing contract assignments at a Warehouse in Austin and San Marcos, TX. perform independent visual inspections of automotive and electric vehicle (EV) components and assemblies, identify defects, document findings, and help ensure that non-conforming items are properly contained before reaching the production line or end customer. This is project-based work supporting major automotive and EV manufacturers in the Reno–Sparks region, with schedules that adjust to client production needs We hire for these roles on a rolling basis and are speaking with candidates now about current and upcoming openings in Austin and San Marcos, TX.What You'll Do • Perform visual inspections of automotive and EV components and assemblies against client specifications, • Identify defects such as scratches, dents, stains, stitching or finish flaws, and missing or damaged parts, • Sort, contain, and segregate non-conforming material per client and industry quality protocols, • Document findings using client inspection forms, tracking systems, and daily reports, • Communicate quality issues to supervisors and on-site quality engineers, • Support rework and repack activities and prepare inspected items for shipment to the production line or end customer, • Maintain a clean, organized, and safe work area in compliance with facility standards, • Follow all client facility safety, PPE, and quality system requirementsWhat You Bring - Required, • At least 6 months of experience in a warehouse, manufacturing, or similar environment, • Strong attention to detail and the ability to spot small visual defects, • Ability to stand for 8–12 hours and lift up to 50 lbs continually throughout a shift, • Willingness to work variable project-based shifts, including nights, weekends, and overtime as needed, • Ability to read, write, and communicate effectively in English for documentation and team coordination (Spanish speakers welcome), • Reliable transportation to the Sparks worksite, • Must be able to complete pre-placement requirementsWhat You Bring - Preferred, • Prior experience as a Quality Control Inspector, Quality Inspector, QC Technician, Quality Auditor, or Sortation/Containment Inspector, • Experience inspecting automotive components, EV battery components, seats, interiors, or other manufactured assemblies, • Familiarity with automotive quality standards (IATF 16949, ISO 9001, PPAP, CS1/CS2), • Experience with third-party quality assurance, sorting, or containment work, • Steel-toed boots and willingness to follow a standard warehouse dress code (solid-color shirts, jeans without rips or holes), • Bilingual (English/Spanish) communication skillsWhat We Offer, • Weekly pay - every Friday, • Medical, dental, and vision benefits for eligible employees, • Temp-to-hire opportunities with many of our client partners, • Dedicated recruiter support throughout your assignment, • Referral bonuses - earn extra when you refer a friendAbout ShareSTAFFShareSTAFF has been a trusted staffing partner for businesses for more than a decade, with associates placed across 30 states and counting. We connect hardworking people with rewarding warehouse, manufacturing, and light industrial opportunities. We're more than a staffing firm - we're here to help you find the right fit, build your skills, and grow your career.How to ApplyReady to get to work? Click "Apply Now" below or contact your nearest ShareSTAFF office to speak with a recruiter today.ShareSTAFF is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions. ShareSTAFF participates in E-Verify; employment eligibility verification will be required at the time of hire. #li1 #zr

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our 2nd shift team. In this position, you will work closely on an integrated team of CesiumAstro managers, engineers, and other cross-functional personnel. You will be responsible for performing inspections on electronic assemblies and finished high reliability products in compliance with CesiumAstro Quality Management System, international standards, and regulatory requirements.JOB DUTIES AND RESPONSIBILITIES • Execute quality control processes per purchased product, manufacturing operations, and customer quality requirements., • Inspection of parts, assemblies, and finished products utilizing necessary tools and equipment in accordance with approved procedures, specifications, and drawings., • Perform measurement using calipers, height gauges, thread gauges, and CMM/VMM., • Document inspection activities using electronic systems, written logs, and labels., • Assist in the development, maintenance, and improvement of inspection methods, inspection plans, and internal quality procedures and processes., • Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies., • Assist in data analysis and department metrics reporting as required., • Assist with the continuous improvement initiatives., • Assist in the resolution of audit findings, observations, and recommendations., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • 2 –4 years relevant work experience or training required, preferably in a regulated environment (e.g., automotive, aerospace, medical device)., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE, • Experience in the aerospace or electronics industry, • Experience with Coordinate Measuring Machine (CMM), • J-STD-001, IPC-A-610, and/or IPC/WHA-A-620 certificationCesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package featuring health, dental, vision, HSA, FSA, life and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members not through our approved vendor list or Talent Acquisition will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: Allen Control Systems is seeking a highly skilled Quality Inspector to support the inspection, testing, and quality analysis. The ideal candidate has a strong eye for detail, technical aptitude, and a commitment to upholding excellence in a fast-paced production environment. This is an onsite position. You will initially work from the current facility in Austin and will transition to our new Pflugerville, TX location upon completion of the facility move, anticipated in Q3/Q4 2026. What You'll Do: Perform visual, dimensional, and functional inspections of machined parts and assemblies using tools such as calipers, micrometers, height gauges, and coordinate measuring machines (CMMs). Verify conformance to engineering drawings, blueprints, and tolerances, including geometric dimensioning and tolerancing (GD&T) requirements. Document inspection results, identify non-conformances, and initiate quarantine procedures for defective items while notifying relevant teams. Conduct first article inspections (FAI) and support supplier quality audits to ensure incoming materials meet specifications. Maintain inspection equipment through routine calibration and troubleshooting to guarantee measurement accuracy. Collaborate with production, engineering, and quality teams to resolve issues, track trends, and contribute to continuous improvement efforts. Generate reports on quality metrics, such as defect rates and yield, using basic data analysis tools. What You'll Need: Education: Associate's or Bachelor's degree in Engineering field. Experience: Minimum of 4 years of experience in quality inspection within a manufacturing or assembly setting. Proficiency with precision measurement tools and reading technical drawings/blueprints. Basic understanding of quality standards like ISO 9001 and statistical process control (SPC). Strong attention to detail, manual dexterity, and ability to work independently or in a team. Certification as a Certified Quality Inspector (CQI) from ASQ or similar. Experience with CMM programming (e.g., PC-DMIS) or automated inspection systems. Familiarity with non-conformance reporting (NCR), material review boards (MRB), and corrective action processes (CAR). What we Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job DescriptionSalary: $60,000 - $110,000 At GreenWorks Inspections, inspections arent just a service, theyre the starting point for trust, education, and better real estate decisions. We are on a mission to elevate the inspection industry by holding ourselves to higher standards, prioritizing the client experience, and empowering inspectors to operate as true professionals. This is a place for inspectors who care about quality, ownership, and making a real impact. Licenses & Certifications: • Licensed by the Texas Real Estate Commission (TREC) as a Home Inspector. (required to apply), • Minimum of two years construction or a related field experience preferred., • Must have Valid Drivers License The Benefits of Working With Us Are Simple: • Youll have the name, reputation, and instant credibility coming out the gate. Our quality is known throughout the region, making getting hired for inspection work easy and painless, • You'll be paid like the expert you are. We pay our inspectors 15-25% more than the state average income for home inspections. Making GreenWorks one of the highest paying inspection firms in the state, • Youll also get our in-house sales, marketing, PR, promotion, social media, networking, and lead-generation machine working on your behalf 24/7, • You do no marketing! Very limited networking may be requested a few times a year, but all work, • Phone service, web, email, marketing materials and anything else needed to run a successful inspection career is provided for you at no additional cost, • Want more licenses and certifications in your tool belt? We can help! Just talk to us about which areas you like, such as pool, septic, termite, or mold inspections and we can build a career plan that fits your needs and increases your income, • Our leadership style is horizontal, not vertical. Horizontal organizations empower the employee and think in terms of team, rather than a single boss laying down all the rules. What that means for you, is every inspector is given a say in the day-to-day workings of the firm. What doesn't work for our inspectors doesn't work at GreenWorks, • Bonus pay or personal time off structures exist for high performance, • We have advanced inspection career capabilities that allow our inspectors to grow as specialist or grow in leadership. This provides a greater opportunity for the inspector to truly grow as the company grows, • Thinking of moving? We are currently serving a 100 mile radius if Dallas/Ft. Worth, Austin, San Antonio and Houston. So if you are interested in flexibility of locations throughout Texas, talk to us, • Health Benefits including dental and vision, • Plus so much more The Commitment from You: • If we train you, teach you, and reveal our cutting-edge strategies: we want to know youre worth the investment., • Our attitude is simple: Were looking for people with character, a solid work ethic, people oriented and a passion for quality. Thats all we need, everything else can be learned. Essential Job Functions: • Perform home and commercial inspections for several hours a day., • Contact clients by either telephone , email or in-person at inspections., • Track inspection activities and update files/database as appropriate., • Must be available to work six days a week. The day of the week off is your choice, but you must inspect full time. We give ample personal time off to spend enjoying the fruits of your labor. Our schedule is flexible with requested shifts and days off. Knowledge, Skills & Abilities: • Comprehensive knowledge of home inspection procedures and more., • Basic skill in computers, apps and office equipment. Physical Tasks & Working Conditions: • The inspector works in a residential and commercial work-site environment; frequent exposure to unpleasant environmental conditions and/or hazards is required. Majority of work performed inside, outside or with exposure to risk., • Must be physically inclined to walk on roofs, crawl in crawlspaces and be able to lift, stand, squat for 12 plus hours a day if needed. Competencies: • Adaptability/Flexibility, • Communication, • Customer Focus, • Dependability, • Managing Conflict, • Problem Solving/Analysis, • Productivity, • Teamwork About Us: GreenWorks was founded in 2009 and specializes in Inspection, Engineering, Maintenance & Environmental Services. We do everything from first time home buyer's inspections to full structural engineering design of commercial buildings to mold consulting. We are our clients eyes to the unknown of their properties. Our services provide our clients with a peace of mind to their real estate decisions. We proudly serve Dallas, Denton, Fort Worth, Frisco, Houston, Austin, San Antonio and All Surrounding Areas. Our Founder & CEO was the 2019 Dallas Business Journals 40 Under 40 Award recipient and has been on a quest to improve the way people view the service industry. Backed by a passion for real estate, she vowed that GreenWorks would be the answer to a long-needed change. After years of training, licensing, and going with her gut, she has proven that her success is in place by her servant style leadership, hands on training, and uncanny ability to continuously grow and create demand. All of which has brought GreenWorks to where it is today, with a plan to keep growing and improving into the future. In 2019, Inc. magazine announced that GreenWorks was No. 1595 on its annual Inc. 5000 list, the most prestigious ranking of the nations fastest-growing private companies. GreenWorks Inspections & Engineering is committed to upholding the highest standards, and helping our team perform consistent, top-notch inspections each and every day. Youll offer the very best inspections (above the TREC standards), and also communicate and educate your clients on the best solutions to meet their individual needs. Whether you are an inspector with several years of experience, newly licensed or looking for retirement options towards the end of your long inspection career. We are interested in speaking with you! For more information, please visit our website: greenworksinspections.com Job Types: Full-time

Job Description Join our Team! We offer 100% employer-paid benefits and an opportunity to work on cutting edge technology in a dynamic team! Acutronic is looking for a Quality Inspector to join our team in Austin, Texas. In this role, you will be responsible for inspecting finished products, products being processed, incoming materials, parts, and assemblies for conformance to company standards. Our ideal candidate will have at least two years of relevant experience in quality control. Quality Inspector I Your Roles/Responsibilities: • Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials, • Checks randomly selected samples and verifies the accuracy of equipment or process, • Uses advanced inspection methods to develop and conduct quality programs, • Keeps records and makes reports indicating the results of inspections, • Identifies and marks non-conforming materials, • Removes minor defects such as chips and burrs, • Executes First Article Inspection requirements, • Participates in troubleshooting and root-cause analysis of RMAs (Return Merchandise Authorizations) and NCs (Non-Conformances), • Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs, • Notifies supervisor or other personnel of production problems, • Reports conditions requiring immediate repair Your Profile/Qualifications/Skills: • High school diploma, or equivalent, required, • At least two years of related experience, preferred, • Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments, strongly preferred, • A combination of experience and education will be considered, • Having knowledge in operating and programming CMM is a plus, • Experience with quality control techniques such as Six Sigma is a plus We Offer: • Employer-paid medical, dental, and vision insurance, • 401k match, • Company-paid holidays, • 4/10 schedule About Acutronic: The Acutronic Group has a proud history of building technologies and teams that are crucial to the aerospace, defense, and transportation industries. Acutronic’s Simulation & Test Division is the global market leader in high-performance motion simulation and test equipment. Our rate tables and advanced centrifuges are used to test or calibrate inertial sensors, navigation systems, and stabilized electro-optics. Hardware-In-the-Loop motion simulators replicate the flight motion profiles and engagement scenarios of missiles. Geotechnical centrifuges and their related accessories are designed to study the behavior of structures, soil mechanics, and earthquakes. Our vibration test systems (shaker tables) allow users to carry out environmental tests to ensure the robustness or quality of manufactured products. The Division also develops and refurbishes stabilized or gimbaled-platforms utilized in applications such as tracking mounts, gun turrets, and directed-energy systems. Acutronic’s Aerospace Components Divison manufactures specialty components for use on uncrewed aerial vehicles, land defense applications, and missile systems. These products are used on next-generation aerospace programs and include a range of electric power systems, servo-actuators, micro-turbines, and Hybrid-Electric-Propulsion-Systems. We offer standard products and excel at designing highly customized solutions for demanding mission requirements. The Acutronic Group employs approximately 300 employees across sites in Austin, Texas; Pittsburgh, Pennsylvania; Switzerland; Germany; France; and India. Acutronic Integrated Systems Inc. 3401 Ed Bluestein Blvd, Austin, TX 78721 acutronic.com +1 737 212 9013 Acutronic is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you have a disability or special need that requires accommodation, please contact us at HR@acutronic.com or phone 412.926.1200. Powered by JazzHR 2qKpljBt3W

Job Description TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Austin, TX in 78753. Pay is: 1st shift - $19.00 hr - 7am - 3pm 2nd shift - $19.00 hr - 3pm - 11pm 3rd shift - $19.00 hr. - 11pm - 7am Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development • Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations • Check/inspect manufactured parts or products for defects, • Read and follow work instructions and general processes, • Use measuring or testing equipment as needed, • Ensure products meet quality standards, • Display excellent customer service, • Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management • Collect and record data Technical • Utilize company portal for time recording and policy acknowledgements Other • Any other duties as assigned Knowledge, skills, abilities Hard skills • Must be able to speak and read in the English language, • Good communications skills, • Must be able to multi-task, • Ability to work in a fast-paced environment, • Ability to handle sensitive and confidential material, • Ability to walk and stand for long periods of time, • Ability to bend, lift, twist and move freely, • Ability to periodically lift/move up to 50 pounds, • Must have reliable transportation Values & attitudes Global team spirit • Team player, • Caring for people, • Open-minded Excellence • Reactive, • Resilient to pressure, • Rigorous Customer focus • Client oriented, • Reliable & trustworthy, • Flexible Initiative • Autonomous, • Innovative, • Daring Work experience Overall recommendations • No experience necessary, • Ability to read blueprints a plus Education background Overall recommendations • High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability. Job Posted by ApplicantPro

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position • Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. • Review and interpret project drawings, specifications, and quality requirements., • Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. • Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). • Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. • Verify materials and workmanship meet the project's approved submittals and standards., • Attend quality and coordination meetings as needed., • Ensure that all inspection and testing records are properly documented and archived., • Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements • High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. • Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. • In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.)., • Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). • Familiarity with construction materials and laboratory/field testing procedures., • Strong organizational and communication skills., • Proficiency with Microsoft Office Suite and QA/QC reporting tools., • Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): • ACI Concrete Field Testing Technician - Grade I, • NICET Certification in Civil/Construction Inspection, • OSHA 10 or 30 Certification, • ISO 9001 Quality Management Systems knowledge, • QMS/QA-related training or certifications Physical Requirements • Must be willing to work flexible schedules and overtime as needed by the department needs., • Ability to lift and carry a minimum of 40 lbs., • Drive a company vehicle in a safe manner, • Walk, stoop, bend, and climb up and down stairs and ladders, • Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel., • Work in high grounds and high open buildings, • Work outside for extended periods in the heat and cold, • Ability to wear appropriate PPE for hazardous materials, • Ability to read and write in EnglishAbout Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES • Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements., • Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies., • Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine)., • Documentation of inspection activities using electronic information systems, written logs, and labels., • Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes., • Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies., • Assist in data analysis and reporting of department metrics as required., • Assist with the continuous improvement initiatives., • Assist in the resolution of audit findings, observations, and recommendations., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • IPC-A-610 / J-STD-001 certification., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE, • Experience in the aerospace or electronics industry.CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Quality Control Inspector (Receiving) to our team. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel. If enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you.JOB DUTIES AND RESPONSIBILITIES • Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements., • Incoming inspection of raw materials and components using LCR meters, • Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies., • Inspection of mechanical hardware using calipers, micrometers, height gages, thread gages, and CMMs., • Generate documentation of inspection activities using electronic information systems, written logs, and labels., • Maintenance of monitoring and measuring equipment, maintaining the supplies, integrity, and cleanliness of QC inspection areas., • Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes., • Assist in data analysis and reporting of department metrics as required., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Assist with the continuous improvement initiatives., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • 3+ years relevant work experience or training required. 5+ years related experience without Associate degree required., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • Experience with mechanical measurement tools (calipers, micrometers, etc.)., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE, • Experience in the aerospace or electronics industry., • IPC-A-610 / J-STD-001 certification.CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionRaba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Growth “We dedicate ourselves to personal and business growth” Raba Kistner is seeking an organized, dependable Certified Welding Inspector – NDT Level II to join our team in Austin, TX. Responsible for inspections of structural steel, carbon steel piping fit-up, and welding. The Certified Welding Inspector – NDT Level II will also perform nondestructive evaluations, such as magnetic particle and ultrasonic testing. Other responsibilities include: • Serve as consultant in area of expertise (structural steel, pipeline, pressure vessel, and reinforcing steel)., • Prepare inspection reports and other client required letters using RK format., • Maintain close contact with all clients during the entire duration of projects., • Notify Leader of potential group involvement in legal matters., • Work with legal counsel as required and directed., • Position will require traversing uneven construction sites, climbing ladders, performing inspections from a bucket lift, performing inspections from scaffolds, and working outdoors in hot, cold, and windy conditions., • Perform other duties as assigned. Qualifications • High School Diploma or GED required., • Minimum 5 years steel inspection/welding experience., • Must be certified by the American Welding Society as a Certified Welding Inspector (AWS QC1)., • Must be certified by the American Society of Nondestructive Testing as NDT Level II or higher in both ultrasonic and magnetic particle testing., • Possess valid Texas driver’s license and meet company’s auto insurability requirements. Organizational skills to utilize company resources efficiently and effectively. Management skills to supervise project teams and evaluate progress of projects. Good oral and written communications skills and ability to work with clients and staff within the organization. Intermediate in Microsoft Office (Word, Excel, PowerPoint, Outlook). Must be self-motivated with good attendance record and be able to work independently. Able to drive company vehicle, manage and complete all assigned jobs efficiently and on time. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly stand, walk, use hands to finger, handle or feel, talk, or hear, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl, and drive vehicle short and/or long distances. Frequently sit and occasionally, taste or smell and utilize hand tools such as sledgehammers, shovels, and picks. Occasional lift and/or move up to 50 pounds with or without assistance. Vison requirements include close, distance, and color. May be required to occasionally work in high, precarious places (tall structures, bucket lifts, extension ladders, etc.), fumes or airborne particles (painting, sanding, solvents, flying lint or dust particles, etc.), toxic or caustic chemicals (including potential for chemical spills, etc.), wet or humid conditions (not weather-related, such as greenhouse, carwash, etc.), extreme cold (not weather-related, such as freezer, cold storage, etc.), extreme heat (not weather-related, such as furnace, kitchen, ovens, etc. where temperature is regularly above 100 degrees F), risk of electrical shock (live electrical wires, equipment that retains power after shutoff), risk of radiation (x-ray equipment, nuclear radiation, electromagnetic radiation, etc.), vibration (jackhammer, soil compactor, equipment that creates high vibration, etc.). Frequently required to work in outdoor weather conditions (exposure to outdoor heat, cold or inclement weather). The noise level for this position is Loud (metal can manufacturing department, large equipment, etc.) This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace

Job DescriptionQuality Inspector: 📍 Location: South Austin, TX 🕒 Full-Time Make an Impact on Quality That Matters: We’re looking for a detail-driven Quality Inspector to help ensure our products meet the highest standards of precision, safety, and performance. In this role, you’ll play a critical part in maintaining quality across incoming materials and production output—helping drive excellence from start to finish. If you’re passionate about accuracy, problem-solving, and working in a fast-paced manufacturing environment, we want to hear from you. What You’ll Do: As a Quality Inspector, you will: • Inspect & Approve Materials: Perform visual and dimensional inspections to verify incoming materials and production outputs meet specifications., • Use Precision Tools: Work with calipers, micrometers, CMMs, and other equipment to ensure exact measurements and tolerances., • Conduct First Article Inspections (FAI): Validate new or updated parts and processes before full-scale production., • Identify & Manage Non-Conformances: Segregate, document, and support disposition of defective materials to prevent production issues., • Drive Quality Improvements: Participate in root cause analysis and corrective actions to continuously improve processes and product reliability., • Maintain Accurate Documentation: Record inspection results, calibration data, and quality metrics clearly and thoroughly., • Collaborate Cross-Functionally: Work closely with production, engineering, and quality teams to resolve issues and maintain standards., • Support Equipment & Calibration: Ensure inspection tools remain accurate and compliant with calibration requirements.What You Bring:Core Qualifications, • Experience in quality inspection or quality control within a manufacturing environment, • Proficiency with precision measurement tools (calipers, micrometers, etc.), • Strong ability to read and interpret engineering drawings, BOMs, and 2D/3D models, • Hands-on experience with First Article Inspections (FAI), • Familiarity with CMM equipment or similar technologies, • Solid math and measurement skills (tolerances, counts, dimensions), • Excellent attention to detail and accuracyTechnical & Soft Skills:, • Ability to identify and escalate non-conformities effectively, • Strong documentation and reporting skills, • Comfortable using MS Office (Excel, Word, Outlook), • Excellent communication and organizational skills, • Ability to multi-task and prioritize in a fast-paced environmentNice to Have:, • Experience retrieving drawings/specs from electronic systems, • Knowledge of shipping practices and export control requirements, • Familiarity with quality assurance processes in manufacturing, • Ability to use hand tools for minor rework, • Willingness/ability to become forklift certifiedWhy Join Us? Be part of a team at the forefront of advanced engineering and innovation, supporting industries like aerospace, defense, and autonomous technologies. Here’s what you can expect: • 🚀 Work on mission-critical products where quality truly matters, • 📈 Opportunities for growth and technical development, • 🤝 A collaborative, team-driven culture focused on continuous improvement, • 🛠 Hands-on experience with cutting-edge tools and systemsWork Environment: You’ll work in a clean, indoor production environment, collaborating closely with cross-functional teams. This role is hands-on and detail-oriented, requiring the use of precision inspection tools and computer systems to maintain accuracy and documentation standards. If you’re ready to play a key role in delivering high-quality, reliable products—apply today and help us build excellence. Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $20.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Jul 29, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Overview:\n Sun Auto Tire & Service Join a Team That Respects Your Skill and Fuels Your Future! Sun Auto Tire & Service, a nationwide leader in automotive services. From coast to coast, we’re committed to integrity, excellence, and developing our people. As a Senior Automotive Technician, you will play a key role in diagnosing and repairing customer vehicles with accuracy, efficiency, and attention to quality. You’ll utilize your technical expertise to perform advanced diagnostics and repairs while ensuring every vehicle meets MAP guidelines and dealership, manufacturer, and company repair standards. Incredible Pay Awaits: $30.00/Hr. – $45.00/Hr. (flag rate), Depending on your experience and certifications. Benefits: • Closed Sundays, • Competitive Bi-Weekly Pay, • Tuition Reimbursement, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy, • Performs complex and heavy-duty repairs, • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers, • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file, • Follows all safety procedures and reports any concerns to direct supervisor, • Ability to work flexible schedules, including weekends as needed. But never Sundays! Other duties as assigned by direct supervisor, • Adheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee Handbook Qualifications: • Previous automotive technician / mechanic experience required, • ASE certifications in lieu of experience, • Ability to demonstrate proper use of computerized equipment for diagnostics, • Valid Driver’s license, • Must be at least 18 years of age, • Possess State Inspector License or ability to obtain a State Inspector license (in applicable locations) within 30 days of hire date, • High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands: The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: • Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building, • Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently, • Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently., • Communicate with customers and shop personnel, • Vision sufficient to detect color, depth, and re-focus We are committed to providing reasonable accommodations to employees with disabilities upon request This is Where Experience Meets Endless Possibility! Get paid like a pro, treated like a leader, and still enjoy your Sundays. Apply today to start your journey with Sun Auto! Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Warby Parker is searching for skilled and enthusiastic Opticians to join our growing team of in-house optical all-stars and play an integral part in what we're all about-helping people see! In this role, you'll become an expert in our brand and our glasses (take a peek at how they're made). Whether you're helping longtime Warby Parker fans or first-time wearers, you'll deliver extraordinary customer service to leave them excited and confident about our glasses. Along the way, you'll partner with motivated, collaborative individuals who take their work (but not themselves) seriously. You'll also expand your current skill set with a slew of career-advancing resources and benefits. Our ideal candidate is a lifelong learner who's eager to help WarbyParker grow. Sound a lot like you? Wonderful-read on! What you'll do Work directly with customers to help meet all of their eyewear needs Take and record measurements, adjust and fit eyewear, and execute these details with flawless accuracy Check that our finished eyewear meets our optical standards, as well as customer requirements and requests Use your expertise to explain prescription terminology and product offerings to customers Work with your team to make sure all customers receive exceptional service Help customers choose the best frames and lenses based on their prescription needs, face fit, personal style, and lifestyle Collaborate with your team to form best practices for sales and customer service that can be implemented throughout the organization Represent our brand to help educate others and get them excited about our values and mission Who you are A licensed dispensing optician in states that require a license (or an ABO-certified optician in non-licensing states) Passionate about the eyewear and retail industries A clear, effective, and professional communicator-you can break down technical terms for customers to easily understand Dedicated to going above-and-beyond to make customers (and your teammates!) happy An energetic, positive team player who's able to adapt in a fast-paced, ever-changing work environment Extremely detail-oriented and capable of juggling a wide range of responsibilities Open-minded-you're constantly learning and challenging what you know Someone who takes your work very seriously, but not yourself Not on the Office of Inspector General's List of Excluded Individuals/Entities (LEIE) In compliance with local and state requirements, Warby Parker is committed to pay transparency. We offer a comprehensive compensation package that includes not only a competitive base salary/hourly rate but also variable compensation for eligible employees. For applicable postings, the range listed is a good faith estimate of the compensation for this position at the time of posting. Final compensation is thoughtfully determined by a variety of factors, including the candidate's qualifications, experience, internal equity, and relevant market data. For applicable postings, non-exempt employees are eligible for overtime pay if you are required to work more than 40 hours in a workweek. Some benefits of working at Warby Parker for full-time employees: • Health, vision, and dental insurance, • Life and AD&D Insurance, • Paid sick leave, • Paid Holidays, • Vacation days per year, • Retirement savings plan (401(k)), • Parental leave (non-birthing parents included), • Short-term disability, • Employee Stock Purchase Plan, • Employee Assistance Program (EAP), • Bereavement Support, • Optical Education Reimbursement, • Free eyewear, • And more (just ask!) Some benefits of working at Warby Parker for part-time employees: • Employee Assistance Program (EAP), • Employee Stock Purchase Plan, • Free eyewear, • Paid sick leave, • And more (just ask!) Warby Parker will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. If you are a California resident, please review the additional privacy disclosures available in Section 8 of our Privacy Policy, which provides a summary of how we collect, use, disclose, and share personal information about you and explain your rights under the California Privacy Rights Act ("CPRA"). It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. CO only: The application window for this position is anticipated to close on the apply before date listed. We encourage interested candidates to apply through our Career website. 1 WA only: Full-Time employees' paid sick leave is accrued at a rate of 1 hour per every 26 hours worked. Full-time employees receive 5 paid holidays and 5-10 vacation days per year (after waiting period, depending on tenure and hours worked). 2 WA PT only: Paid sick leave (accrued at a rate of 1 hour per every 30 hours worked). Warby Parker was founded with a mission: to inspire and impact the world with vision, purpose, and style. We're constantly asking ourselves how we can do more and make a greater impact, and that starts by reimagining everything that a company and industry can be. We want to demonstrate that a business can scale while doing good in the world, without charging a premium for it. And we've learned that it takes creativity, empathy, and innovation to achieve that goal. Since the day we launched in 2010, we've pioneered ideas, designed products, and developed technologies that help people see. We offer everything you need for happier eyes at a price that leaves you with money in your pocket, from designer-quality glasses and contacts to eye exams and vision tests, and you can meet us online, at our stores, or even in your home. Wherever and whenever you need it, we're there to make exceptional vision care simple and accessible. (Delightful, too.) Ultimately, we believe in vision for all, which is why for every pair of glasses or sunglasses we sell, a pair of glasses is distributed to someone in need through our Buy a Pair, Give a Pair program. • Job Identification 3992, • Job Category Opticianry, • Posting Date 06/19/2026, 04:38 PM, • Job Schedule Part time, • Locations 78758 (On-site)

Based in Orlando, Florida, Massey Services is one of the nation's largest and most respected service companies, with a history of providing quality service for more than three decades. Celebrating consecutive years of profitable growth since 1985, Massey Services and its subsidiary organizations employ over 2,800 team members and operate over 2,400 vehicles that provide residential and commercial pest prevention, termite protection, landscape and irrigation services to over 800,000 customers from 180+ service centers throughout Florida, Georgia, Louisiana, Texas, South Carolina, North Carolina, Virginia, Tennessee and Oklahoma. Compensation: $55,000 - $65,000 Due to our continued growth and expansion in our sales market, we currently have great opportunities to join our team as an outside sales inspector. No industry experience required. Our paid training program is one of the finest in our industry. We offer a competitive compensation plan along with an excellent benefits package including: • Company vehicle, • Medical, dental and vision, • Company paid life insurance, • Paid vacation, holidays and sick days, • Short- & long-term disability, • 401(k) retirement plan with company matching funds, • Tuition reimbursement program, • And many more Requirements: • Building long-term, trusting relationships with our customers, • Growing our business (sell) control expenses (make a profit), • Inspecting our customer's homes to determine services needed, • Prepare & present proposals to existing and new customers, • Networking and cold calling to generate sales leads, • Telephone prospecting and appointment setting, • Accurate & timely completion of all sales related paperwork, • Prior outside sales experience a plus, • High school diploma or equivalent (GED), • Valid driver's license and clean driving record, • Background checks completed on all candidates considered for hire Massey Services, Inc. is a drug free workplace and equal opportunity employer

WSP is currently initiating a search for a High Voltage Substation Inspector for our Power Constructors, Inc. (PCI) sector for our Baton Rouge, Louisiana office. This position will have the ability to work remotely from any mutually acceptable location. This position may be up to 100% travel. Be involved in projects with our PCI Team and be a part of a growing organization that meets our clients' objectives and solves their challenges. Provides inspection support to engineers and project managers to ensure construction compliance with plans, specifications, contract documents, and codified requirements. Responsibilities involve performing field inspections on various assigned construction projects of moderate scale, scope, and/or complexity, including examining and evaluating the placement of concrete, installation of underground pipelines, earthwork and roadway paving, buildings, structures, systems, building materials, mechanical and electrical installations, foundations, and environment. Generates accurate and concise documentation regarding assigned aspects of the project. Ensures that responsibilities are delivered and adhered to with a level of quality that meets or exceeds acceptable industry standards for design, safety, functionality, and sustainability. • Collect, compile, and analyze data from the physical work site, surveys, structural plans, blueprints, schematics, data, technical drawings, flow diagrams, material sampling, computer-generated reports, and other matrices for single, multi-phase, or multi-site field inspection activities., • Use survey instruments, metering devices, and test equipment to perform inspections on projects of moderate complexity and/or scope, including proposed and existing site conditions, equipment, construction, materials, controls, resources, layout, alignment, and elevation to determine conformance with applicable rules, standards, codes, and construction or operating permits., • Follow standard practices to provide technical assistance and guidance that accounts for the proper inspection, construction, and functioning of buildings, highways, roads, bridges, materials, structures, infrastructure, equipment, and/or mechanical systems according to design standard specifications., • Act as consultant regarding work progress and problem resolution; may serve as the only inspector on a construction project or assist in overseeing construction inspection activities for projects of a moderate scope and complexity within a district., • Verify load calculations, change orders, interpretation of contract plans and specifications; resolving differences in interpretation of plans and specifications., • Monitor project phasing plans and contractors' work to ensure quality control and contract compliance; documenting work progress and issues arising throughout scope of project., • Work with cross-functional teams in executing project work., • Attend pre-construction meetings and answer questions from contractors and other attendees., • Assist with calculating payments due to contractors for work completed., • Write technical reports summarizing inspection findings and conclusions; generating complete, accurate, and concise documentation using photographs, sketches, calculations, software, spreadsheets, technical drawings, flow diagrams, 2D/3D illustrations, and reports., • Assist technical staff, project managers, and contractors with risk identification and assessment, offering input, analysis, escalation, or resolution with construction, mitigation, and improvement activities for more intricate and involved construction or engineering problems., • Assist with work plan preparation and coordination of any field/site work, reviewing staffing, and equipment utilization data and time/cost estimates., • Provide guidance and training to entry-level inspection staff., • Engage in contact with client and contractor personnel to schedule and coordinate project inspection., • Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures., • Perform additional responsibilities as required by business needs. Required Qualifications • High School Diploma., • Minimum of 9 years of relevant post education experience in discipline with prior construction inspection experience., • Have computer skills (to properly fill out daily and weekly reports) and also be capable of photo documentation with working knowledge of Word and Excel., • Essential professional licensure/certification(s)., • Valid state driver's license., • Able to pass a Motor Vehicle Report (MVR) background check., • Well-defined knowledge of construction inspection principles, field inspection practices, process, methods and techniques., • Well-defined knowledge of relevant construction codes, regulations, compliance practices, and record-keeping requirements., • Analytical mindset with an ability to exercise sound judgement in evaluating situations and making decisions., • Strong interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to a technical and non-technical audience., • Proficient self-leadership with attention to detail, accuracy, multi-tasking, and prioritization of responsibilities in a dynamic work environment., • Ability to learn new techniques, perform multiple tasks simultaneously, follow instruction, and comply with company policies., • Ability to work independently with minimal supervision, as well as part of a team to meet business objectives., • Competent critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from inspection and testing results, data collation, load calculations, statistical analysis and arriving at the most effective, economical, and logical solution., • Ability to direct others in the field such as subcontractors and junior-level staff to consistently complete tasks safely, efficiently, and accurately according to specifications., • Able and willing to travel and stay for a minimum of 6 weeks at a time for a project., • Must be able to work in extreme weather conditions for up to 12 hours a day, • Must be able to wear company-provided PPE for the entire shift while onsite, • Able to lift a minimum of 50 lbs or more at any given time throughout the day, • Must be able to walk on average 3 to 5 miles per day across rough terrain and/or unlevel surfaces., • Ability to step in and out of a 3/4-ton pickup truck several times a day, • Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies., • Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek. Travel will be required depending on project-specific requirements. Physical Requirements included but not limited to: • This job may require you to work up to 12 hour days, 5 to 6 days a week if project requires, • Able and willing to travel and stay for a minimum of 6 weeks at a time for a project, • Must be able to work in extreme weather conditions for up to 12 hours a day, • Must be able to wear company-provided PPE for the entire shift while onsite, • Able to lift a minimum of 50 lbs or more at any given time throughout the day, • Must be able to walk on average 3 to 5 miles per day across rough terrain and/or unlevel surfaces., • Ability to step in and out of a 3/4-ton pickup truck several times a day Preferred Qualifications • Bachelor's Degree in closely related discipline is preferred., • Knowledge of transmission line work, foundations and stringing of conductors, and transmission substations and facilities.

Job Description POSITION DESCRIPTION Job Title: Maintenance Coordinator Supervisor: Executive Director or Maintenance Director FLSA Status: Hourly, non-exempt Date Approved: September 2025 OVERALL JOB PURPOSE Assures preventative maintenance of Community, including building exterior and interior, grounds, walkways, driveways, and parking lot to ensure the Community is safe, attractive, and operating within budget. May provide back up support for Community Driver to safely transport residents in Community vehicle. MINIMUM JOB QUALIFICATIONS AND REQUIREMENTS • Must be 21 years of age, • High school diploma or equivalent, • Minimum of two (2) years’ verifiable hands-on maintenance experience in areas such as plumbing, electrical, carpentry, HVAC, etc. is necessary, • Ability to perform and/or coordinate emergency building repairs at the Communities; includes contacting and contracting subcontractors to complete repairs, • Provide training for Executive Director in the operation of emergency systems, • Experience in the safe handling and use of power tools normally used in construction, maintenance, and landscaping, • A valid driver’s license and good driving record are required along with proof of auto insurance. May be required to assume the duties and responsibilities of the Community Driver position as needed, • Ability to lift up to one hundred (100) pounds, • Demonstrated ability to communicate effectively and positively (in English), both verbally and in writing, with residents and staff, • Meets state health related requirements (as applicable for position), • Ability to work in a team setting and be a positive team player, • Maintain a positive, respectful, and professional approach with coworkers and residents, • Possess excellent customer service and organizational skills, • Ability to work under time constraints and meet department deadlines, • Satisfactorily pass company’s and state regulated criminal record clearance, health screening and TB clearance (if applicable) ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Assures maintenance and repair of Community interior, exterior, and equipment, including resident apartments, by performing or supervising maintenance tasks or facilitating such performance by outside maintenance services personnel, as directed by Executive Director, • Inspects Community and monitors Maintenance log daily to promptly address maintenance concerns, • Implements and assures adherence to Community maintenance programs such as HVAC-related, carpet-related, mold-related, etc., • Meets deadlines in repairs to Community equipment and performs various other Community and resident maintenance tasks or facilitates repair by outside maintenance services personnel as directed by Executive Director, • Orders maintenance equipment, parts, supplies, and maintenance services from outside personnel, as needed following company procedures, • Assists in monitoring capital improvement projects, • Recommends maintenance repairs and replacements to Executive Director, Maintenance Director, or Regional Director of Maintenance, • Assures safe, orderly, and functional condition of mechanical room, • Assures all maintenance equipment and supplies are stored appropriately and safely, • Performs emergency maintenance services at Community on an on-call basis, • Assists housekeeping employees in deep cleaning of resident apartments and common areas with attention to detail and according to schedule, • Maintain company standards with an eye for detail on all apartment turns, • Performs duties associated with Community emergency preparation and response systems, as directed by Executive Director, Maintenance Director, or Regional Director of Maintenance, • Maintains Hazardous Chemical Inventory and Safety Data Sheets according to Community Hazard Communication Program and local, county, state, and federal guidelines, • Review SDS as requested for potential exposure to hazardous chemicals and take necessary precautions, • Maintain positive communication with local fire marshal, building inspector, state elevator inspector, and any other jurisdictions governing the community, • Conducts certain components of new employee orientation and education and training classes for employees as directed by Executive Director or Maintenance Director, • Performs quality assurance audits as assigned by Executive Director or Maintenance Director, • Effectively interacts with any Regional or Support Office maintenance services consultants and contracted services personnel, • Participate in monthly Safety Committee meetings, • Perform other duties as assigned by the Maintenance Director or Executive Director OTHER JOB DUTIES AND RESPONSIBILITIES • Perform all work assigned for the agreed-upon salary, accepting no additional payment or non-perishable gifts from residents, vendors, Community management, or others, • Meet the assigned work requirements of the job. Regular attendance is required, • Serve as a role model for all employees by displaying a responsible, cooperative, and positive attitude, • Represent the Community in a professional, courteous, and friendly manner, • Adhere to dress/appearance code. Changes in attire may be dictated by special occasion or weather conditions. If you have questions, check with your supervisor, • Adhere to company policies, procedures, and standards, • Promote resident advocacy and demonstrate excellent customer service at all times, • Follow specified procedures as outlined in the Safety Manual regarding the handling of contaminated material encountered in accidents or injuries on the Community premises, • Attend education and training classes as necessary to fulfill state applicable to the position, • Maintain personnel, resident, and business proprietary and/or confidential matters/material in strict confidence with management of the company (and/or other company staff as needed), • This position is considered a universal employee worker and will be crossed trained in other positions as directed by the supervisor, • Maintains certifications as necessary such as First Aid, to fulfill state regulations (if applicable), • This position has no supervisory responsibilities Equal Employment Opportunity Statement: Sunshine Retirement Living (The Company) proudly provides equal employment opportunities to all employees and applicants. We celebrate diversity and are committed to creating an inclusive environment where residents, employees, and families feel respected and valued, regardless of race, color, religion, sex, national origin, age, disability, or any other protected status. Salary-History Statement: Sunshine Retirement Living (The Company) is committed to fair and equitable pay practices. We do not request or consider an applicant’s past or current salary when making compensation decisions, in compliance with applicable salary history and pay equity laws. PHYSICAL REQUIREMENTS Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Stand X Walk X Sit X Pushing, pulling and/or reaching X Grasping and fine manipulation X Climb or balance X Stoop, kneel, crouch, or crawl X Talk or hear X Taste or smell X Uses chemicals/paint/toxics X Lifts Weight or Exerts Force 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Up to 10 pounds Up to 25 pounds Up to 50 pounds X Up to 100 pounds X More than 100 pounds The Community reserves the right to revise the duties set forth in this job description at its discretion.

Write reports, business correspondence and document quality related issues and activitiesEffectively present information and respond to questions from project managers, superintendents, clients, customers and the general publicEffectively communicate and develop positive working relationships with t

Hilton in Austin, Texas is seeking a Housekeeping Inspector to ensure the highest standards of cleanliness and guest satisfaction. You will conduct room inspections, support housekeeping operations, and assist in training staff to uphold quality standards.

Quality Coordination: Collaborate with Quality Managers to ensure all requested inspections and tests are completed accurately and on time. Join Velocity Electronics as our next QUALITY INSPECTOR in Austin, Texas. We are seeking a Quality Inspector who utilizes state-of-the-art tools and techniques

Quality Inspector Job Duties: Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Docum

Webber, a Ferrovial company, is seeking an inspector to oversee construction inspection activities for large projects in Austin, Texas. The inspector will ensure that contractor work meets specifications, document findings, and monitor site safety.

Quality Inspector Location: Fort Worth Alliance, TX Department: Quality Assurance Reports To: QA Supervisor Employment Type: Full-Time Position Summary The Quality Inspector is responsible for inspecting and testing manufactured products, documenting defects, and verifying corrective actions in the

Make an impact in the role of Coca-Cola Quality Control Technician to follow safety procedures and company policies, provide excellent service to customers and team members, and gain knowledge of company offerings to better serve clients. Other duties include assist with processing returns and excha

Monitor product quality, inventory levels, and shelf-life of materials and chemicals.

Documents actions by completing production and quality forms.

National Assemblers - - Responsibilities: Assemble furniture and install home fixtures; Mount TVs and set up entertainment systems; Provide customer service and educate customers; Maintain accurate records of work performed; Follow safety and quality control procedures.

As a Warehouse Quality Control Specialist, you will be responsible for assisting with warehouse operations and ensuring smooth logistics, including: organize inventory and ensure items are stored properly.

Documents actions by completing production and quality forms.

W Slaughter Ln #106 - [Production Worker] - Weekly Pay (Direct Deposit/Onsite Check Delivery) / ACA Compliant Healthcare Benefits (Dental + Vision Coverage) / Employee Bonus Options - As a Wire Tech Assembler with Luxor Staffing, you will: Assemble wires and cables according to blueprints and specif

Mechanical Assembler Robotics.Our client, a leader in innovative robotics technology, is seeking a Mechanical Assembler Robotics to join their dynamic team.As a Mechanical Assembler Robotics, you will be part of the Manufacturing Department supporting the Robotics Production Team.The ideal candid

In this role, the Assembler, where you will provide friendly assistance to customers and team members, coordinate with other departments when needed, and respond to questions by phone, email, or in-person.Additional duties include manage simple records and enter information accurately, help organize

Execute quality control processes per purchased product, manufacturing operations, and customer quality requirements. Drive scheduling of day-to-day quality activities and ensure timely and accurate turnaround of inspection and quality processes. Assist in the development, maintenance, and continuou

What You'll Do Support discrete quality improvement projects and new cell programs from "concept, design, validation, ramp, and production handover" in dynamic manufacturing environments Support quality validations during new cell launches with the goal of implementing quality improvements and

Responsibilities Expertise in ERP Automation testing combined with Quality Engineering Lead teams and manage client accounts with strategic planning Advocate and uphold quality assurance standards and practices Mentor and develop junior staff to enhance their skills * Assure project success

Bring passion and dedication to your job and there's no telling what you could accomplish! Join the AppleCare Enterprise Services (ACES) Product Support Engineering (PSE) group as a Senior Software Quality & Validation Engineer, in this role, you will validate and strengthen Apple's software offeri