Trabajos maintenance mechanic en Fresno, CaliforniaCrear alertas

Job Description About MGE MGE Underground is a growing utility infrastructure contractor serving utility companies from our Paso Robles headquarters and regional hubs throughout California. Our mission is to support our clients’ expanding utility and infrastructure requirements by positioning MGE as the leading provider of innovative construction solutions at the best value. Our Core Values Safety | Continuous Development | Respect | Integrity | Performance | Trust | Fun How You Can Make an Impact The Mechanic is experienced in a wide range of mechanical skills. This position will be responsible for but not limited to troubleshooting hydraulic, electrical, and gas/diesel problems, including some fabrication. Additional responsibilities also include the maintenance, inspection, and repair of company owned vehicles and equipment, assisting with audits, inspections, and general upkeep of the shop. This position has the potential for promotion and wage advancement within the department with continued on the job experience and the completion of relevant certification programs. Also, the ability to travel throughout California is required, as well as the ability to work weekends and overtime as needed. How You Will Contribute • Coach and mentor entry level Mechanics, oversee daily work/performance, inspect installations/repairs, ensure all safety standards and practices are met., • Ability to make repairs on job sites as needed., • Conduct inspection of vehicles and equipment to diagnose and troubleshoot problems for repair., • Repair and maintain construction equipment of various types and sizes from light-duty to over the road trucks and from light-duty to heavy-duty operating equipment., • Perform preventative maintenance following operations manuals as well as electrical and hydraulic diagrams/ air condition units., • Remove and replace defective parts by dismantling devices using hand and power tools., • Test repaired equipment to ensure proper performance when used., • May fabricate, weld, and cut parts, using arc-welding/ wire feed and flame cutting equipment., • Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery., • Perform Department of Transportation (DOT) ninety-day inspections. What You Bring to the Table • Required: Ability to quickly learn and understand various processes regarding MGE’s policies, procedures, and software programs., • Excellent communication skills., • Ability to read, write and follow oral and written instructions., • Ability work and drive safely in all weather and road conditions., • Ability to work flexible hours and days, to include nights, weekends, and extended hours., • Ability to read and interpret schematics., • Valid Class C Driver’s License with a clean driving record., • Desired: Valid Class A Driver’s License with a clean driving record., • Certifications in: Air Conditioning, Computer Diagnostics, Boom Inspections, Welding, Hydraulics, BIT, and Air Brakes. Your Prior Experience • High School Diploma or General Equivalency Diploma (GED), • Minimum 4 years of experience in heavy-duty equipment service and repair., • Minimum 4 years of experience with hydraulics, diesel engines, and DOT/BIT., • One year experience with air brakes., • One year experience with vehicle electrical and computer controlled systems., • Welding and fabrication experience Our Competitive Package Pay: $40.00 - $53.00 per hour This pay range is our competitive compensation at the time of this job posting. Your pay will be determined based on experience, education, skills, and applicable knowledge. Above and Beyond Benefits • Medical, dental, vision, and life insurance., • 401K, • Vacation accrual for all non-exempt employees in addition to ten paid company holidays., • Flexible Time-off Policy that promotes a culture of freedom and responsibility for paid time-off., • Multiple monitors, standing desks, and other ergonomic equipment to match your work style., • Monthly birthday celebrations, team lunches, company-wide employee recognition events, and other employee engagement opportunities., • Employer-sponsored learning/career development opportunities and conferences/seminars., • Employee Assistance Program: no-cost counseling, legal consultation, financial consultation, ID recovery, emotional well-being resources, dependent care resources, and crisis consultation. Additional Information Job Type: Full-Time, On-Site Affirmative Action/EEO MGE Underground is an equal opportunity employer and does not discriminate based on any protected characteristics. Pre-Employment and Physical Requirements Successful applicants must pass a drug screen and background check before beginning employment. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions • Employee is frequently required to walk, use hands to finger, handle, or feel objects, tools, or controls, and talk or hear. The employee is often required to stand and walk for prolonged periods of time; reach with hands and arms; and stoop, kneel, crouch, or crawl., • Employee must be able to lift to 50 pounds individually, push, pull or carry objects, use abdominal and lower back muscles to provide support over time without fatigue and to effectively jump, sprint or throw an object., • Must be able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to visually inspect machines., • Employee may be required to drive a motor vehicle and travel to various locations. Other Duties Your duties and responsibilities may change at any time, with or without notice, based on the company’s needs. Powered by JazzHR 0qZZm4yawm

Job Description POSITION: Heavy Equipment/Class 8 Truck Mechanic, B LOCATION: Fresno, CA REPORTS TO: Fleet Maintenance Manager SALARY: $25.00 to $32.00/ per hour, DOE COMPANY OVERVIEW: Caglia Environmental is a family-owned and operated company with a proud legacy of over 80 years in the Central Valley. We provide essential environmental services, including recycling, waste collection, and landfill management, with a strong commitment to sustainability, innovation, and community. Our team plays a vital role in helping to build cleaner, greener communities, and we're always looking for motivated individuals who want to make a meaningful impact through their work. BASIC FUNCTIONS: Maintain Heavy Equipment & Over the road Truck fleet. Ensure that equipment meets all safety and regulatory requirements before releasing into service. Assist with all daily fleet maintenance activities, and all other assigned duties. PRINCIPAL DUTIES & RESPONSIBILITIES: • Works with Fleet Manager and Leadman to determine daily workload., • Performs daily routine and repair maintenance on heavy landfill equipment, garbage collection vehicles, and satellite collection trucks., • Assists with maintaining a clean and orderly parts and materials inventory., • Communicates repair issues with Fleet Manager and/or Lead man in a timely manner., • Complies with all maintenance and facility rules, regulations, policies, procedures., • Reports any unsafe working conditions and/or practices., • Ensures work areas and equipment are kept neat, clean, and orderly each day., • Attends all safety training and meetings as required for all shop and facility employees., • Able to complete and submit all required daily reporting/paperwork to management in a timely manner., • Performs general maintenance of company buildings and facilities., • All other special projects, implementations, and tasks as assigned. CORE COMPETENCIES • Set high work standards and motivate others, • Ability to communicate with management, • Focus on safety, quality, timely repairs, and attention to detail., • Use of technical and professional knowledge and acquired skills REQUIRED QUALIFICATIONS (SKILLS, EDUCATION AND EXPERIENCE) • High School Diploma, • Minimum 3-years related maintenance experience, • Ability to utilize engine, transmission & other diagnostic software, • Ability to utilize maintenance tracking software, • Trouble shot & repair electrical components, • Repair steering & suspension systems, • Preform minor transmission & engine repairs, including tune-ups, • Preform PM inspections & repairs, • Ability to pass a random drug screen, • Ability to read and write English, • 2 or more years hydraulic experience PREFERRED QUALIFICATIONS • ASE Certifications a plus, • ASE Air Brake a plus, • Valid Class A or B Drivers License with clean driving record, • Welding Certificate a plus, • 2 or more years MIG and or stick welding experience

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240043

_ Join Our Community of Food People! BASIC PURPOSE Responsible for upkeep and maintenance of warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, batteries, etc). This keeps day and night warehouse operations functional to ensure efficient shipping and receiving of product. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $26.00hr - $34.00hr. As applicable this role may also receive overtime compensation. Work Schedule: • Monday - Friday: 8am - 4:30pm ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform necessary repairs and maintenance to warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, etc.) to insure that adequate machinery is available for day and night warehouse operations. Review any equipment reports submitted by warehouse associates, record actions/repairs taken, and maintains a repair log per USF policy. Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy. Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.) Maintain and secure the battery-charging area, batteries and other equipment contained therein. Responsible for company tools and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area. If authorized, may purchase tools and other equipment needs from local vendors to perform required duties. Performs light maintenance duties as assigned (i.e., replacement of light bulbs, painting, storage rack repairs, light plumbing, equipment repairs, basic drywall and concrete repairs, etc.) Benefits Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. SUPERVISION RELATIONSHIPS Internal: Warehouse personnel and supervisory staff, Operations support, Maintenance and Sanitation personnel External: Outside vendors QUALIFICATIONS Education/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred. Related Experience: A minimum of six months previous mechanic experience required. Knowledge/Skills/Abilities: Knowledge of equipment repair and operation; able to repair and overhaul warehouse equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervision Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally, 2. STAND Frequently, 3. WALK Frequently, 4. DRIVE Occasionally (Test drives equipment) JOB REQUIRES WORKER TO LIFT: 1. 1-10 lbs (Sedentary) Continuously, 2. 10-20 lbs (Light) Frequently, 3. 25-50 lbs (Medium) Occasionally, 4. 50-100 lbs (Heavy) Occasionally, 5. Over 100 lbs (Very Heavy) Never JOB REQUIRES WORKER TO CARRY: 1. 1-10 lbs (Sedentary) Frequently, 2. 10-20 lbs (Light) Frequently, 3. 25-50 lbs (Medium) Occasionally, 4. 50-100 lbs (Heavy) Occasionally, 5. Over 100 lbs (Very Heavy) Never JOB REQUIRES WORKER TO: 1. Push/pull Occasionally e.g.: Boxes, pallet jack control arm, hand tools, drive units 1. Climb/balance Occasionally e.g.: equipment Pallet Jack, fork lift, order selector 1. Stoop/squat Frequently, 2. Kneel/bend Occasionally, 3. Bend Frequently, 4. Reach above shoulder Occasionally, 5. Grasp objects Frequently, 6. Manipulate objects Frequently, 7. Twisting Occasionally Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $26.00hr - $34.00hr. As applicable this role may also receive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Job DescriptionDescription: THIS IS A UNION REPRESENTED POSITION We are proud to be affiliated with the International Association of Machinists and Aerospace Workers AFL-CIO, District Lodge 190, which represents this position at our company. This means you become part of the union within 30 days of being hired and your wages and benefits are established through the CBA negotiation process. Your starting wage will be determined based on your relevant skills and experience, and you will be placed on a development plan that leads to a wage increase every six-months based on your success. You will become a Toyota Certified Service Technician after six months, and a Bronze certified technician after 18-months. You will have the opportunity to continue to progress to additional certification levels earning more pay at each step and should achieve journeyman status within a few years depending on where you start. Here's an explanation of the job: JOB OVERVIEW: At the direction of your Service Advisor, you’ll perform the diagnoses and repair of mechanical, electronic, gas/diesel and hydraulic material handling equipment while ensuring all repairs address the problem and not the symptom. You’ll also be expected to identify additional safety, mechanical and other items in need of repair when working on the equipment. These additional repairs are to be clearly documented on the work order as well as communicated directly to the customer with the goal of gaining approval to go forward with them before the work is done, or before leaving the job site if on the road. You’ll keep track of your time throughout the day to ensure correct billing of your 8 hours each day. You will work closely with your Service Advisor to mitigate when lost, and/or overtime may be incurred, and you’ll keep them updated on your job progress through the day. KEY RESPONSIBILITIES: The following list describes what a fully trained service technician will be involved in. We hire service technicians based on level of experience (I, II, III, Journeyman), so you may come in as a Shop Technician, reporting to a branch location every day with an assigned bay, or as a Road Technician where you start in our Shop then progress to an assigned territory based on your learning plan and experience, or as a Fleet Technician, where you are dedicated to a large customer with one or a few locations. Equipment Repair and Maintenance • Troubleshoot, repair, and maintain mechanical, electronic, gas/diesel and hydraulic systems on new, used and/or rental Industrial Forklifts, Aerial equipment, industrial cleaning equipment and utility vehicles/ golf carts to name a few, • Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications, • Determine if additional parts are needed to complete the repair or as a follow-up to preventive maintenance service and order necessary parts, • Add any additional repair work and time to the work order before closing, • Complete work orders daily, to maintain a clean “Work in Progress” report, • Return warranty parts within 48hrs of warranty repair. Ensure parts are tagged and labeled for accurate identification, • Notify customer to “Red Tag” equipment if it is not safe to use. Advise Customer of the safety issue(s) and obtain signature as acknowledgement that they are aware of safety issue(s). Notify Service Advisor, • Complete Pre-Delivery Inspections on new equipment as assigned Customer Service • Check and review work order for clarity, detail, and completeness prior to presenting to the customer for signature, • Ensure customer understands what was done and what is next for every job, communicating in person, via text or email per customer preference/agreement General Duties • Regularly use personal protective equipment in the performance of each job, • Tracks parts inventory in service vehicle. Re-order parts as needed to keep vehicle stocked, • Keep van or assigned shop bay clean, organized, and ASEC compliant always, • If assigned a company vehicle, proactively stay on top of vehicle maintenance items, • Stay updated on current Toyota product(s) via on-line training, and any other information/ materials provided, • Attend all regularly scheduled service and safety meetings and complete assigned safety training on time, • Drive in accordance with established DMV and TMH driving rules and regulations, always being courteous, • Follow environmental and safety regulations, immediately reporting potential hazards that may cause injury to your supervisor, • Follow written policies and procedures in the company IIPP Program and Employee Handbook, • Willingly accept other duties, responsibilities and/or special projects as directed by managementRequirements: QUALIFICATIONS & SKILLS: Required • 7+ years of experience as a Forklift Mechanic/Technician, • High School diploma or equivalent, • Excellent written and verbal English communication skills, • Ability to work safely under pressure, take general directions and use good judgement when working independently, • Ability to work both independently and collaboratively, • Ability to shift priorities and manage multiple tasks in a fast-paced environment, • Ability to act in a way that is consistent with our values, • Basic knowledge of computer and ability to type information and take photos with a mobile device, • Ability to drive a motor vehicle and other industrial equipment if necessary to travel to customer site(s) and test equipment, • Clear Background, Drug screen and DMV report Desired • ASE certifications, • Master Certified Technician (non-Toyota considered), • Technical school certificate of completion PHYSICAL REQUIREMENTS: • Approximately 80% is spent bending, squatting, standing, or moving about the work area, • Approximately 15% could be spent driving to and from customer sites and/or forklift equipment, • Approximately 5% is spent seated at a desk, working on the telephone or at a computer terminal, • Operation of foot controls or repetitive foot movement required for driving equipment including forklift and motor vehicle, • Ability to lift 50 pounds without assistance and 100 pounds with assistance from others or utilizing a lifting device Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. The policy of RJMS Corporation is to hire, train, and promote all persons in all job groups in accordance with the law, without regard to race, color, religion, sex, sexual orientation, age, marital or military status, national origin, gender identity, the presence of any sensory, mental, or physical disability, genetic information, or any other status or characteristic protected by local, state, or federal law. RJMS CORPORATION is an equal employment opportunity and affirmative action employer.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Fresno, CA. Most positions are first shift with a pay scale of $35-$45/hour based on experience & skill level. If you are an HVAC Technician or Mechanic and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • Commercial and/or Residential HVAC Installation, • Complete Install, Hanging and Insulating Duct, Running Lines, etc., • Service, Maintenance and Troubleshooting, • Some Pipe Work, • Some Refrigeration Requirements: • 2+ Years of Experience in the Field, • Basic Tools for the Trade, • Proper PPE must be worn Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Tuition assistance, • Vision insurance, • Wellness resources Future Ford of Clovis is part of the Future Automotive Group, a family-owned and operated dealership group with over 60 years of success across Northern and Central California. With multiple locations and continued growth, we offer a team-oriented culture, career advancement opportunities, and a strong commitment to delivering quality service and support to our customers. Recent tech school graduates encouraged to apply Pay Scale: Base hourly rate ranges between $17.00 - $22.00 Why This Role Matters This is a career-building opportunity where youll gain hands-on experience, work alongside experienced technicians, and continue developing your skills in a professional dealership environment. What Youll Do • Inspect, diagnose, and repair customer vehicles, • Perform routine maintenance and standard service repairs, • Use diagnostic tools and shop equipment to identify issues, • Complete repair orders and document findings accurately, • Maintain vehicle cleanliness during service, • Follow manufacturer and dealership repair standards, • Support shop efficiency through teamwork and organization, • Stay current with ongoing training and certificationsWhat Were Looking For, • Automotive mechanic experience or recent tech school graduate, • Strong mechanical aptitude and willingness to learn, • High school diploma or GED, • Ability to work in a fast-paced environment, • Team-oriented mindset with strong work ethic, • Commitment to delivering quality work and customer satisfaction, • Valid drivers license Preferred Qualifications • Dealership experience (a plus, not required), • Some post-secondary automotive training, • Desire to grow into a high-performing, certified technicianBenefits, • Medical, Dental, Vision, • 401(k), • Paid Time Off & Holidays, • Company-paid life insurance, • Employee discounts, • Manufacturer training and certification programs, • Flexible five-day work weekApply Today If you're ready to build your career as an automotive technician and grow with a company that invests in your futurewe encourage you to apply today. All post-offer applicants must successfully complete pre-employment testing to include background checks, insurability, and drug testing to qualify for employment The Future Automotive Group is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, are based on merit, competence, performance, and business needs. We do not discriminate on the basis of, veteran status, or any status protected under federal, state, local law, regulation, or ordinance, such as race and gender.

Job DescriptionDescription: THIS IS A UNION REPRESENTED POSITION We are proud to be affiliated with the International Association of Machinists and Aerospace Workers AFL-CIO, District Lodge 190, which represents this position at our company. This means you become part of the union within 30 days of being hired and your wages and benefits are established through the CBA negotiation process. Your starting wage will be determined based on your relevant skills and experience, and you will be placed on a development plan that leads to a wage increase every six-months based on your success. You will become a Toyota Certified Service Technician after six months, and a Bronze certified technician after 18-months. You will have the opportunity to continue to progress to additional certification levels earning more pay at each step and should achieve journeyman status within a few years depending on where you start. JOB OVERVIEW: At the direction of your Service Advisor, you’ll perform the diagnoses and repair of mechanical, electronic, gas/diesel and hydraulic material handling equipment while ensuring all repairs address the problem and not the symptom. You’ll also be expected to identify additional safety, mechanical and other items in need of repair when working on the equipment. These additional repairs are to be clearly documented on the work order as well as communicated directly to the customer with the goal of gaining approval to go forward with them before the work is done, or before leaving the job site if on the road. You’ll keep track of your time throughout the day to ensure correct billing of your 8 hours each day. You will work closely with your Service Advisor to mitigate when lost, and/or overtime may be incurred, and you’ll keep them updated on your job progress through the day. KEY RESPONSIBILITIES: The following list describes what a fully trained service technician will be involved in. We hire service technicians based on level of experience (I, II, III, Journeyman), so you may come in as a Shop Technician, reporting to a branch location every day with an assigned bay, or as a Road Technician where you start in our Shop then progress to an assigned territory based on your learning plan and experience, or as a Fleet Technician, where you are dedicated to a large customer with one or a few locations. Equipment Repair and Maintenance • Troubleshoot, repair, and maintain mechanical, electronic, gas/diesel and hydraulic systems on new, used and/or rental Industrial Forklifts, Aerial equipment, industrial cleaning equipment and utility vehicles/ golf carts to name a few, • Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications, • Determine if additional parts are needed to complete the repair or as a follow-up to preventive maintenance service and order necessary parts, • Add any additional repair work and time to the work order before closing, • Complete work orders daily, to maintain a clean “Work in Progress” report, • Return warranty parts within 48hrs of warranty repair. Ensure parts are tagged and labeled for accurate identification, • Notify customer to “Red Tag” equipment if it is not safe to use. Advise Customer of the safety issue(s) and obtain signature as acknowledgement that they are aware of safety issue(s). Notify Service Advisor, • Complete Pre-Delivery Inspections on new equipment as assigned Customer Service • Check and review work order for clarity, detail, and completeness prior to presenting to the customer for signature, • Ensure customer understands what was done and what is next for every job, communicating in person, via text or email per customer preference/agreement General Duties • Regularly use personal protective equipment in the performance of each job, • Tracks parts inventory in service vehicle. Re-order parts as needed to keep vehicle stocked, • Keep van or assigned shop bay clean, organized, and ASEC compliant always, • If assigned a company vehicle, proactively stay on top of vehicle maintenance items, • Stay updated on current Toyota product(s) via on-line training, and any other information/ materials provided, • Attend all regularly scheduled service and safety meetings and complete assigned safety training on time, • Drive in accordance with established DMV and TMH driving rules and regulations, always being courteous, • Follow environmental and safety regulations, immediately reporting potential hazards that may cause injury to your supervisor, • Follow written policies and procedures in the company IIPP Program and Employee Handbook, • Willingly accept other duties, responsibilities and/or special projects as directed by managementRequirements: Required • 7+ years of experience as a Forklift Mechanic/Technician, • Minimum Toyota Certified classification, • High School diploma or equivalent, • Excellent written and verbal English communication skills, • Ability to work safely under pressure, take general directions and use good judgement when working independently, • Ability to work both independently and collaboratively, • Ability to shift priorities and manage multiple tasks in a fast-paced environment, • Ability to act in a way that is consistent with our values, • Basic knowledge of computer and ability to type information and take photos with a mobile device, • Ability to drive a motor vehicle and other industrial equipment if necessary to travel to customer site(s) and test equipment, • Clear Background, Drug screen and DMV report Desired • ASE certifications, • Master Certified Technician (non-Toyota considered), • Technical school certificate of completion PHYSICAL REQUIREMENTS: • Approximately 80% is spent bending, squatting, standing, or moving about the work area, • Approximately 15% could be spent driving to and from customer sites and/or forklift equipment, • Approximately 5% is spent seated at a desk, working on the telephone or at a computer terminal, • Operation of foot controls or repetitive foot movement required for driving equipment including forklift and motor vehicle, • Ability to lift 50 pounds without assistance and 100 pounds with assistance from others or utilizing a lifting device

This is a union represented position affiliated with the International Association of Machinists and Aerospace Workers AFL-CIO, District Lodge 190. Your wages and benefits are established through the CBA negotiation process. Your starting wage will be determined based on your relevant skills and experience, and you will be placed on a development plan that leads to a wage increase every six-months based on your success. You will become a Toyota Certified Service Technician after six months, and a Bronze certified technician after 18-months. You will have the opportunity to continue to progress to additional certification levels earning more pay at each step and should achieve journeyman status within a few years depending on where you start. At the direction of your Service Advisor, you'll perform the diagnoses and repair of mechanical, electronic, gas/diesel and hydraulic material handling equipment while ensuring all repairs address the problem and not the symptom. You'll also be expected to identify additional safety, mechanical and other items in need of repair when working on the equipment. These additional repairs are to be clearly documented on the work order as well as communicated directly to the customer with the goal of gaining approval to go forward with them before the work is done, or before leaving the job site if on the road. You'll keep track of your time throughout the day to ensure correct billing of your 8 hours each day. You will work closely with your Service Advisor to mitigate when lost, and/or overtime may be incurred, and you'll keep them updated on your job progress through the day. The following list describes what a fully trained service technician will be involved in. We hire service technicians based on level of experience (I, II, III, Journeyman), so you may come in as a Shop Technician, reporting to a branch location every day with an assigned bay, or as a Road Technician where you start in our Shop then progress to an assigned territory based on your learning plan and experience, or as a Fleet Technician, where you are dedicated to a large customer with one or a few locations. • Troubleshoot, repair, and maintain mechanical, electronic, gas/diesel and hydraulic systems on new, used and/or rental Industrial Forklifts, Aerial equipment, industrial cleaning equipment and utility vehicles/ golf carts to name a few, • Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications, • Determine if additional parts are needed to complete the repair or as a follow-up to preventive maintenance service and order necessary parts, • Add any additional repair work and time to the work order before closing, • Complete work orders daily, to maintain a clean "Work in Progress" report, • Return warranty parts within 48hrs of warranty repair. Ensure parts are tagged and labeled for accurate identification, • Notify customer to "Red Tag" equipment if it is not safe to use. Advise Customer of the safety issue(s) and obtain signature as acknowledgement that they are aware of safety issue(s). Notify Service Advisor, • Complete Pre-Delivery Inspections on new equipment as assigned, • Check and review work order for clarity, detail, and completeness prior to presenting to the customer for signature, • Ensure customer understands what was done and what is next for every job, communicating in person, via text or email per customer preference/agreement, • Regularly use personal protective equipment in the performance of each job, • Tracks parts inventory in service vehicle. Re-order parts as needed to keep vehicle stocked, • Keep van or assigned shop bay clean, organized, and ASEC compliant always, • If assigned a company vehicle, proactively stay on top of vehicle maintenance items, • Stay updated on current Toyota product(s) via on-line training, and any other information/ materials provided, • Attend all regularly scheduled service and safety meetings and complete assigned safety training on time, • Drive in accordance with established DMV and TMH driving rules and regulations, always being courteous, • Follow environmental and safety regulations, immediately reporting potential hazards that may cause injury to your supervisor, • Follow written policies and procedures in the company IIPP Program and Employee Handbook, • Willingly accept other duties, responsibilities and/or special projects as directed by management Required: • 7+ years of experience as a Forklift Mechanic/Technician, • Minimum Toyota Certified classification, • High School diploma or equivalent, • Excellent written and verbal English communication skills, • Ability to work safely under pressure, take general directions and use good judgement when working independently, • Ability to work both independently and collaboratively, • Ability to shift priorities and manage multiple tasks in a fast-paced environment, • Ability to act in a way that is consistent with our values, • Basic knowledge of computer and ability to type information and take photos with a mobile device, • Ability to drive a motor vehicle and other industrial equipment if necessary to travel to customer site(s) and test equipment, • Clear Background, Drug screen and DMV report Desired: • ASE certifications, • Master Certified Technician (non-Toyota considered), • Technical school certificate of completion, • Approximately 80% is spent bending, squatting, standing, or moving about the work area, • Approximately 15% could be spent driving to and from customer sites and/or forklift equipment, • Approximately 5% is spent seated at a desk, working on the telephone or at a computer terminal, • Operation of foot controls or repetitive foot movement required for driving equipment including forklift and motor vehicle, • Ability to lift 50 pounds without assistance and 100 pounds with assistance from others or utilizing a lifting device

Job DescriptionAbout Zūm:Zūm is revolutionizing mass mobility with its Connected Mobility Experience (Zūm CMX™) system that connects and coordinates people, vehicles, and operations in real time. In the $50 billion student mobility market – the largest segment of the mass mobility industry – Zūm CMX is transforming a daily source of anxiety and disruption into a reliable, transparent, and efficient mobility experience for students and families. Today, more than 4,500 schools rely on Zūm CMX. Recognized globally for its innovative approach and operational execution, Zūm has been named to Fast Company’s World’s Most Innovative Companies, CNBC Disruptor 50 and Changemakers, the World Economic Forum, and the Financial Times’ Fastest Growing Companies lists. Zūm is backed by leading investors including Sequoia Capital, GIC, TPG, and Softbank. About the Role We're seeking a skilled Technician II to contribute to maintenance operations at one of our key sites. This role encompasses vehicle diagnostics, repairs, and preventive maintenance with increasing complexity. You'll diagnose mechanical and electrical issues, assist with major component rebuilds, and ensure vehicles meet stringent safety and compliance standards. You'll be a vital part of our transportation operations, maintaining fleet reliability and safety for students and communities. Interested in joining us? We’re hiring for several roles with a July 2026 start date, and we’ll be reviewing applications and scheduling interviews in the coming weeks. What Makes You Successful in This Role You're a developing technician who excels in a dynamic maintenance environment where challenges vary daily. You balance efficiency with meticulous attention to safety and quality standards. You're a capable problem-solver who can diagnose issues across major vehicle systems and execute repairs with confidence. You're eager to expand your skills and learn from senior technicians while taking ownership of your assigned work. You're comfortable performing diagnostics with modern tools, executing complex electrical and AC repairs, and maintaining thorough documentation. You keep your workspace organized, follow proper procedures, and consistently deliver quality repairs. Responsibilities Vehicle Diagnostics & Repair ● Diagnose malfunctions and perform vehicle repairs including steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, clutches, transmissions, and oil, temperature, gas regulating components, and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements● Assist Tech I’s with the rebuilding of engines, transmissions, and differentials as assigned by the manager● Perform test drives during Preventative Maintenance inspections to identify driver reported issues and conduct test drives after service to confirm repairs have been completed successfully Maintenance Operations & Quality Control ● Arrange for and obtain appropriate inspections and approval of all major repairs before the vehicle is released from the maintenance facility● Identify and report any additional maintenance and/or repairs found necessary in conducting assigned repairs and maintenance including repairs and maintenance required to be performed by Technicians with a higher qualification level● Perform work assigned by manager or lead when supervised● Record time spent, parts used and repairs and/or maintenance conducted on the appropriate form● Perform road calls and on-the-road repairs as assigned Safety & Compliance ● Maintain a safe, clean, productive, and efficient work area including ensuring the work area is in compliance with all relevant Federal, State/Provincial, local guidelines and requirements, and company Housekeeping standards and safety regulations● Advise Lead Technician of unsafe maintenance conditions or practices and/or vehicle abuse● Work assigned shift and overtime as needed (AM/PM) Qualifications Basic Qualifications: ● Minimum of two to four years medium/heavy truck Fleet mechanic repair experience● Diagnostic, Electrical, and AC skills are a must● Technical knowledge of major vehicle systems and diesel equipment is required● Previous fleet experience with familiarity with diesel and gasoline systems● Possess the recommended minimum hand tools for a Medium and Heavy Duty and Diesel Technician● Ability to use good judgment and decision-making skills Preferred Qualifications: ● Valid CDL License (Must be able to obtain within the first 90 days of employment)● ASE Certification in brakes, suspension, engine, electrical, A/C or a Master School Bus and/or a Master Truck TechnicianThe targeted base salary range for this role is listed in the compensation section below. Actual salary may be above or below this range based on factors such as location, skills, and relevant experience. In addition, this position may include additional compensation in the form of bonus, equity, or commissions. If you are a full-time salaried or hourly worker, we offer the following benefits: Medical, Dental, Vision, 401(k), Holidays, Wellness, Vacation, and more. Zūm Services, Inc. and all its subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description POSITION: Maintenance Shop Foreman REPORTS TO: Maintenance Manager LOCATION: Fresno, CA SALARY RANGE: $32.00 - $37.00 per hour, DOE COMPANY OVERVIEW Caglia Environmental is a family-owned and operated company with a proud legacy of nearly 90 years in the Central Valley. We provide essential environmental services, including recycling, waste collection, and landfill management, with a strong commitment to sustainability, innovation, and community. Our team plays a vital role in helping to build cleaner, greener communities, and we're always looking for motivated individuals who want to make a meaningful impact through their work. POSITION SUMMARY The Maintenance Shop Foreman is a hands-on mechanic and day-to-day shop lead responsible for supporting the Maintenance Manager in coordinating preventive maintenance, diagnostics, and repairs for fleet waste collection trucks, yellow iron, and transfer station equipment. This position works alongside mechanics while helping plan, prioritize, and schedule repair work to ensure equipment is maintained safely, efficiently, and in compliance with Company safety standards and applicable federal and state regulations. The role provides direction, training, and technical support to mechanics, promotes safe work practices, and helps reduce downtime and lost productivity. PRINCIPAL RESPONSIBILITIES • Provide directions to mechanics and leads to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner., • Support maintenance and repair of fleet waste collection trucks, yellow iron, loaders, compactors, conveyors, transfer trailers, roll-off equipment, balers, forklifts, and other site support equipment used in the operation., • Monitor operational performance and efficiency and take action to redirect activities appropriately., • Report to management on performance; make recommendations for process/programmatic changes for improvement or efficiencies., • Provides day-to-day direction, training, feedback, and support to mechanics, and escalates performance or conduct concerns to the Maintenance Manager., • Perform inspections of outside repairs to ensure all work was properly completed in accordance with Company's safety and compliance procedures and federal and state regulations; follow up where appropriate., • Identify training opportunities and, as necessary, document issues and constructively discuss corrective action, as needed, with mechanics., • Conduct Quality Control Inspections, track issues and resolution to ensure all work is properly completed in accordance with Company's safety and compliance procedures and federal and state regulations., • Oversee repair diagnostics on more complex matters and provide coaching where necessary; may be required to road test vehicles to determine necessary repairs., • Oversee maintenance shop inventory to ensure necessary equipment and parts levels are maintained., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive and repair maintenance functions on heavy equipment and vehicles used by Company, including: engine chassis repair and maintenance; knowledge of vehicle & equipment of body control systems, including hydraulics and electrical systems to maintain and repair vehicles in a timely and safe manner; knowledge of heating and air conditioning systems to effectively diagnose and repair complex heating and cooling systems in vehicles in a timely and safe manner; and knowledge of welding tools to fix heavy equipment in a safe and efficient manner to ensure equipment is back in an operable condition as quickly and as safely as possible., • Manage related administrative matters for team including records of all preventive and corrective maintenance performed, recording of all information into Maintenance Software, with targets and performance objectives established by leadership., • Knowledge of CMMS systems (Computer Maintenance Management System), • Performing "hands on" repairs to the equipment is required for this position. MINIMUM REQUIREMENTS • 5 years of experience in maintenance working with class 8 truck & or heavy equipment., • 2 years of experience in a lead technician role, supervisor or other management role requiring a thorough knowledge of safe working practices, DOT, OSHA and other federal and state regulations., • Valid driver's license with satisfactory driving record., • Ability to perform physical requirements of position. PREFERRED QUALIFICATIONS • High school diploma or G.E.D., • Automotive Service Excellence (ASE) Certification (T1–T8)., • Ability to create and implement training programs to elevate the skill levels of mechanics., • Valid Commercial Class A or B driver's license., • 7 plus years of related experience, or any combination of education and experience that provides equivalent knowledge, skills and abilities., • 1 or more years' experience working with CMMS (Computer Maintenance Management System) WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS • Work is performed in a maintenance shop and transfer station environment, including indoor and outdoor areas and around moving vehicles, heavy equipment, noise, dust, and changing weather conditions., • Must be able to safely perform the physical requirements of the position, including standing, walking, bending, kneeling, climbing, reaching, lifting, carrying, pushing, pulling, and using tools and equipment as needed., • Must follow all Company safety procedures and wear required personal protective equipment (PPE). SCHEDULE AND AVAILABILITY • Work schedule may vary depending on operational and staffing needs., • May be required to support early morning operations, extended hours, weekends, urgent repairs, or breakdown response as business needs require.

Job Description Maintenance Mechanic This position will be responsible for improving the overall operating functions of the manufacturing machines to achieve the desired goals. This will include preventative maintenance programs, machine upgrades to enable difficult production orders to be more efficient, diagnostic/troubleshooting ability to resolve downtime and quality issues and overall machine efficiency improvements. Essential Duties and Responsibilities: • Diagnose, repair, and perform preventative maintenance on all equipment., • Improve the machinery efficiency and reliability through the established PM program., • Ensure that the maintenance team is productive and proactive in supporting the production team., • Ensure that fellow mechanics and any other personnel are following the inventory control systems set in place., • General Maintenance Housekeeping., • Ability to assist engineering in major projects and machine overhauls, • Support the Safety program, practice the Lockout/tag-out policy and ensure that the equipment safety devices are operational., • Takes after hour emergency phone calls for machine breakdowns, • Observe and comply with all good working practices. Requirements: Knowledge, Skills, and Abilities: • Leadership and Organizational skills, • Ability to direct and motivate other team members to complete specific tasks, • Analytical skills and advanced electrical/mechanical problem-solving skills and the ability to give technical guidance to other team members., • Experience in machine modifications and rebuilds, • Ability to work autonomously with limited supervision., • Detail oriented with the ability to maintain accurate documentation, • Flexible work schedule and the ability to work other shifts as needed and to work overtime and weekends., • Basic Computer Skills, • Understand PLC’s and ladder logic Starting at $18/hr – higher pay depending on experience Company DescriptionPrideStaff is a national staffing organization, delivering innovative solutions to the challenges employers face every day. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. With locations across the United States, we're well positioned to partner with clients and candidates to ensure a successful match of employee talent with customer needs. When it comes to your success, we leave nothing to chance! Our Mission: Consistently provide client experiences focused on what they value most.PrideStaff is a national staffing organization, delivering innovative solutions to the challenges employers face every day. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. With locations across the United States, we're well positioned to partner with clients and candidates to ensure a successful match of employee talent with customer needs. When it comes to your success, we leave nothing to chance! \r\n\r\nOur Mission: Consistently provide client experiences focused on what they value most.

Job Description Rosenbalm Rockery Inc has an immediate opening for a maintenance mechanic. Responsibilities include day to day equipment maintenance of our transfer trucks, loaders, forklifts and other various equipment. Knowledge of changing oil, changing tires and basics of mechanic work a must. Requirements: Driver's license with clean record, 2 years experience in industry, familiar with truck and trailers PM's and repairs, must be able to lift at least 75 lbs and good communication skills. Company DescriptionSee more information about our company at www.therockery.comSee more information about our company at www.therockery.com

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Job Summary: The Electrical Maintenance Mechanic is responsible for troubleshooting, repairing, maintaining, and installing electrical and mechanical systems on production and facility support equipment within a polystyrene tray manufacturing environment. Maintain housekeeping and organization stand

Compensation: Starting pay rate: $36.Eligible for annual and skill-based wage increases.Shift Available: This position may be assigned to any of the plant's three non-rotating shifts based on operational needs.Job Summary: The Electrical Maintenance Mechanic is responsible for troubleshooting, repai

Job Description Vie-Del is a major producer of concentrates from grapes and other fruits, brandy, spirits, and wines. We are currently seeking talented candidates to join the Vie-Del Family. We offer a competitive salary and excellent benefits package in an employee-friendly and rewarding environment. Job Description/Duties: We are currently seeking a Maintenance Mechanic who will fulfill the responsibilities and achieve the objectives assigned by the Maintenance Foreman and other members of management. • The qualified Maintenance Mechanic is responsible for diagnosing, and repairing malfunction of plant equipment, systems, and machines., • Maintain and repair all production equipment: pumps, pasteurizers, high-pressure pumps, evaporators, stills, valves, etc., • Maintain and repair all support equipment: boiler, air-compressor, ammonia compressors, thermal storage units, condensers, vacuum pumps, ammonia refrigeration systems, air conditioning units, conductivity meters, fluid meters, etc., • Handling of chemicals for support equipment operation., • Fabrication and manufacturing of equipment for production needs., • Must have 480-volt, 3-phase electrical experience. Troubleshooting 3-phase motor starters and motor control circuits., • Instrumental experience, • Welding experience; MIG & TIG, • Machine shop & pump repair experience., • Fabrication experience is required; a Fabricator Journeyman is strongly preferred. Minimum Requirements: • High School Diploma or equivalent, • Requires two (2) years of working experience as a Maintenance Mechanic, • Valid Driver License, • Must be able to work All Shifts/OT & weekends required.Pay/Salary is negotiable depending on experience. Powered by JazzHR AjvR3GkIJV

Must possess all knowledge and skills of a "B" Maintenance Mechanic and "B" Electrician.

Perform preventive scheduled maintenance on electrical and gas fired equipment as directed. Engineering & Maintenance team at the Oasis at Death Valley! The Oasis at Death Valley is situated in a lush, spring-fed desert oasis, surrounded by the vast and arid desert of Death Valley National Park.

Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises. Cleans and adjusts mechanical components. Preventive Maintenance: Performs routine checks according to documented procedures.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Electrical Maintenance Manater job duties: Accomplishes electrical maintenance human resource objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees;

Remain alert to mechanical problems and refer as necessary to maintenance. Perform routine calibrations, adjustments, and maintenance to maximize machine performance. Mechanical and technical skills/aptitude.

Carrying standard equipment and parts with you at all times.Commuting between the locations at which you will work.Performing inspections, conducting assessments, and liaising with clients to ascertain the issues that warrant attention.Choosing the most apt course of action in light of project const

Electrician Job Duties: Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring Inspect, test, and diagnose issues with electrical systems an

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

You will operate state of the art equipment to put together mechanical structures that are the foundation of our product line.

Completes and documents preventative maintenance on mechanical and electrical commercial food equipment. Mechanical Aptitude - demonstrates mechanical and electrical aptitude to operate and troubleshoot equipment. Education and Work Experience + High school diploma or GED and 2-4 years of electrica

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises.

This company has over 160 years of experience as a processing and packaging machine manufacturer with a global presence in more than 30 countries, rest assured;no day will ever be identical.The client's customers are as diverse as their products, ra Field Service Technician, Service Technician, Fiel

Schedule and manage site-wide maintenance, troubleshooting, and repair duties for chillers, cooling towers, and central plant equipment. Perform daily and monthly preventative maintenance on all associated equipment of chillers, cooling towers, and central plant equipment. Ensure completion of maint

Performs complex mechanical installations per engineering direction. Lays out and installs piping, equipment, and other mechanical systems in compliance with construction drawings and specifications.

Experience with aComputerized Maintenance Management System (CMMS). Complete andproperly document preventative maintenance routines. Cultivate positiveworking relationships with our Client and Operations Maintenance teammembers.

If you're looking to make a difference with your technical knowledge and excellent customer service, then we want to hear from you! WinnCompanies is searching for a Maintenance Technician I to join our team at Clinton Avenue Apartments, a 78-unit residential community located in Fresno, CA. In this

Conduct preventative maintenance on 15kV substations, switchgear, transformers, and breakers.

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

We provide end-to-end electrical contracting, operations and maintenance services, and energy sustainability solutions to the industrial, commercial, utility, and renewable asset markets.

Sebastian is a premier provider of communications and construction services in California.With more than 70 years of experience, Sebastian is passionate about providing people with a great place to work.Our high growth and dynamic model offers employees the opportunity for career advancement.As a fa