Trabajos it technician en Shreveport, LouisianaCrear alertas

What You'll Be Doing: Performs inspection, diagnosis and repair of assigned vehicles and equipment and preventative maintenance such as oil changes and greasing of trucks Conducts safety checks on trucks Maintains a clear line of communication to the Branch Manager and Regional Fleet Staff and other staff in the maintenance department Keeps the Hydrovac Fleet operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance Updates job knowledge by participating in educational opportunities; reading technical and regulation publications Occasionally may perform service calls for emergency breakdowns Maintains a clean, safe work area in compliance with Corporate/OSHA Standards and performs all work in accordance with established procedures What We're Looking For: Education: High School Diploma Licensed Heavy Duty Technician Driver’s License required; Class B CDL license is preferred Demands include frequent sitting, standing, walking, stooping, kneeling, bending, lifting, and reaching. Employees must also crawl under vehicles, climb ladders, work in tight spaces, stand or kneel on cement floors, and regularly lift or move heavy objects such as tires, rims, and brake drums. Regularly required to lift or move objects weighing 25 to 50 lbs, with moderate grasping, lifting, pushing, and pulling of these objects Work may require more than 40 hours per week What You'll Need For Success: Some knowledge with electronic diagnostics Experience with Peterbilt and Western Star chassis a plus Experience with troubleshooting Hydrovac equipment a plus Knowledge of DOT compliance, laws, rules, regulations, and safety is helpful Computer literate: Fleetio (our fleet services technology,) Microsoft, Outlook, and Excel Will be required to provide your own standard tools; all specialty tools will be provided If you feel you don't have the experience listed above, but still think you are qualified for the job, we encourage you to apply for consideration. What You'll Get In Return: Generous weekly pay and overtime opportunities Low-cost Medical, Dental, and Vision Insurance Retirement Plan with Employer Matching Contributions Attractive Vacation Programs Inclusive Group Life Insurance Supportive Employee Assistance Program (EAP) that allows for covered behavioral health visits Rewarding Employee Referral Program Valuable Employee Training Program(s) About Us Badger Infrastructure Solutions is the industry leader in non-destructive hydro-excavation (hydrovac) services. Since 1992, Badger has been innovating cutting-edge technology and providing services to a diverse customer base, including oil and gas, energy, industrial, construction, transportation and other markets, as well as numerous government agencies within Canada and the United States. We hire great people from a wide array of backgrounds, not because it is the right thing to do, but because it makes Badger stronger. There has never been a better time to join and grow with Badger. The compensation for this role will be commensurate based on education and/or experience. #BDGRJobsHP Badger Infrastructure Solutions is the industry leader in non-destructive hydro-excavation (hydrovac) services. Since 1992, Badger has been innovating cutting-edge technology and providing services to a diverse customer base, including oil and gas, energy, industrial, construction, transportation and other markets, as well as numerous government agencies within Canada and the United States. We hire great people from a wide array of backgrounds, not because it is the right thing to do, but because it makes Badger stronger. There has never been a better time to join and grow with Badger.

Job DescriptionDescription: The Dobbs Truck Group is a growth company that successfully expands our operations and customer base through a high-quality team of employees. Dobbs Truck Group operates 25 commercial truck dealerships through two operating companies – Dobbs Peterbilt and Western Truck Center. These dealerships represent some of the best commercial truck brands including Peterbilt, Volvo, Mack, Autocar, and Hino and include locations in Arkansas, California, Louisiana, Mississippi, Oregon, Tennessee, and Washington. We offer a competitive benefits package including medical, dental, vision, long-term disability, life insurance, and 401(k), as well as paid vacation and sick leave. Our Company is looking for long-term employees that we can invest in and grow with as we pursue our mission of being the premier commercial truck dealer group. I. General Job Description This position will be responsible for the maintenance and repair on all types of commercial trucks and equipment while working out of the fully equipped mobile service truck. This position will be responsible for the diagnosis and repair of all vehicles and equipment serviced by the Company’s facilities. This position will be expected to perform with the highest degree of professional competence, as it relates to quality of work, product knowledge, and customer service. The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Responsibilities • Complete repairs in estimated time per industry standards., • Grow and maintain the customer base, • Perform DOT inspection, troubleshooting, and repair on all areas of a vehicle including electrical, charging systems, starting systems, engine, HVAC, powertrain, and chassis components., • Repairs include diagnosis and removal of injectors, cylinder heads, camshafts, main bearings, rod bearings, and transmission/clutch components., • Utilize various diagnostic equipment, software, and technical publications/information to determine root cause of customer complaint and repair solution., • Maintain service truck, supplied tooling, and parts inventory to Company’s expectation., • Provide thorough documentation that supports complaint, cause, and correction., • Perform preventative maintenance when requested., • Respond promptly to customer requests and foster customer relationships., • Report to customer and service administration on any deferred repairs., • Flexibility to be available after hours and alternate days. II. Minimum Job Qualifications • 18 years of age., • 4 years of dealer experience as a Diesel/Service Technician., • Valid Commercial Driver’s License and a qualified MVR abstract., • Minimum tool requirements (see below). III. Desired Job Qualifications • High school graduate or GED with 5 years of experience in a truck dealership or equivalent experience., • Ability to work independently with minimal supervision., • Great customer service skills. IV. Mental Capability Requirements • Comprehension: Ability to understand complex problems, collaborate, and explore alternative solutions., • Organization: Ability to organize and prioritize work schedule on short-term basis (more than 1 month)., • Reasoning & Decision Making: Ability to make decisions with moderate impact on immediate work unit., • Communication: Ability to communicate effectively with individuals utilizing a phone., • Mathematics: Ability to compute, analyze, and interpret numerical data for reporting purposes. V. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle or feel, reach with hands and arms, and talk or hear. The employee is frequently required to stand, walk, climb or balance, stoop, kneel, crouch or crawl, and taste or smell. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 65 pounds. Specific vision abilities required by this job include color vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and risk of electrical shock. The employee is frequently exposed to wet and/or humid conditions, extreme heat, and vibration. The employee is occasionally exposed to high, precarious places, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions. The noise level is normally loud. VI. Common Expectations of Performance for all Employees The following includes common expectations for all employees of the Company. The evaluation of job performance will be based on these common expectations as well as the position-specific responsibilities described above. Communications, Teamwork, and Feedback to Others • Contribute to a work environment that is based on trust and respect., • Have discussions on a regular basis with their manager to discuss opportunities to best achieve individual performance objectives and departmental goals., • Suggest ways to improve the efficiency of conducting their job duties., • Promote continuous improvement and change to support company growth., • Mentor others unselfishly., • Give credit where it’s due. Company Loyal Policies and Work Ethic • Adhere to the policies contained in the Employee Handbook., • Adhere to the Company’s Employee Conduct Policy., • Support management decisions toward meeting company goals., • Be open and receptive to new ideas, regardless of their origin., • Make prudent decisions, which are based on the best interest of the Company and its long-term future. We are an Equal Opportunity Employer Dobbs Truck Group operates 25 commercial truck dealerships through two operating companies – Dobbs Peterbilt and Western Truck Center. Dobbs Peterbilt and Western Truck Center are equal opportunity employers that values a broad diversity of talent, knowledge, experience, and expertise. We foster a culture of inclusion that drives employee engagement to deliver superior performance to the communities we serve. Dobbs Peterbilt and Western Truck Parts do not discriminate in hiring or employment on the basis of race, color, religious creed, national origin, sex, ancestry, pregnancy, genetic information, gender identity, sexual orientation, or marital status; or on the basis of age against persons whose age is 40 and over, or on the basis of physical or mental disability; or to disabled veterans or to Vietnam veterans. We are proud to be an affirmative action employer and encourage minorities, women, individuals with disabilities, and veterans to join our team. Requirements:

Job DescriptionBenefits: • 401(k), • Company car, • Company parties, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • 401(k) matching, • Opportunity for advancement HVAC Service Technician – Residential And Light Commercial (Shreveport/Natchitoches) Aire Serv of Shreveport/Natchitoches is hiring an HVAC Service Technician for mostly residential straight cool systems with some light commercial work. If you can diagnose, communicate, and take care of customers but want better pay, better support, and a team that actually has your back, this is for you. Why service techs choose us • Pay: $90,000 to $140,000+ per year, depending on experience, schedule, and performance. Top performers who keep their schedule full can realistically earn $150,000 plus per year., • Full time, year round work with overtime and on call rotation shared across the team., • 50% employee health insurance paid by the company., • Dental, vision, and company paid life insurance., • 401 k with company match., • Company truck, gas card, uniforms, and tablet or phone., • Paid weekly., • Paid vacations, holidays, personal days, and paid birthdays., • Company paid team outings throughout the year., • Unlimited water and ice provided on the job., • No drama team culture that respects technicians and backs them up with strong office support. What you will do • Run residential and light commercial service calls, primarily straight cool systems, with some heat pumps and gas equipment if that fits your mix., • Diagnose comfort, air quality, mechanical, electrical, and refrigerant issues and present clear options to customers., • Perform repairs, maintenance, and start ups according to company standards and local codes., • Communicate findings, recommendations, and pricing clearly and professionally., • Use company software and basic forms to document work, notes, photos, and recommendations., • Collect payment or payment information on site when work is completed., • Recommend maintenance plans, IAQ, accessories, and replacement when appropriate and in the customer’s best interest., • Maintain a clean, organized truck and professional appearance. What it takes • Strong residential HVAC service experience, for example two or more years running calls independently., • Solid diagnostic skills with straight cool systems; light commercial experience is a plus., • EPA certification required; additional certifications such as NATE are a plus., • Valid driver’s license and clean driving record., • Able to work in attics, outdoors, crawlspaces, and other field conditions common in HVAC service., • Able to lift 60 pounds and handle physically demanding work., • Professional communication skills and the ability to talk with homeowners and small business owners comfortably., • Positive, can do attitude and pride in doing the job right the first time., • Able to pass a background check and drug screen. Why this role stands out • Mostly residential work with some light commercial, so your day is predictable and built around the systems you know best., • Strong earning potential when you combine base pay with overtime, spiffs, and add on sales., • Clear expectations and support from leadership that understands what it is like to be on the truck., • Opportunity to grow into senior technician, field trainer, or lead roles as the company continues to grow.

Job Description Mechanical Systems and Service (MSS) is a Crete United company in West Monroe, LA. MSS is a specialty contractor in heating ventilating and air conditioning. It is a great time to join us as we continue to expand throughout the state and beyond. Our team is looking to hire a Commercial HVAC technician to troubleshoot, maintain, repair and install HVAC systems. Technician must have 3 years of HVAC Technician Service experience as well as an EPA 608 certification. This position will entail travel to Northern MS 1-2 weeks a month from MON-THUR home on FRI, SAT, SUN, this is a union position with amazing Union benefits! If you are interested in joining a team where you can further develop your skills and work with an excellent customer base, we would like to hear from you. What You'll Do: • Perform routine repairs to pump seals, bearing, etc., • Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions., • Determine customer concerns with HVAC and boiler systems., • Follow standards, policies, and procedures, including safety procedures and the maintenance of a clean work area., • Record and report faults, deficiencies, and other unusual occurrences, as well as the time and materials expended on work orders., • Adjust system controls to setting recommended by manufacturer to balance system., • Recommend, develop, or perform maintenance procedures such as cleaning, power-washing, or vacuuming equipment, lubricate parts, or changing filters., • Install auxiliary components to heating-cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues, and stokers, following blueprints, • Study blueprints, design specifications, and manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components, • Fabricate, assemble, or install duct work or chassis parts, using portable metal-working tools or welding equipment, • Other duties as assigned Position Requirements: • 3+ years of commercial HVAC maintenance experience, • Universally EPA Certified, • Ability to troubleshoot HVAC components with built up systems and package units, which may include chiller air handler pump towers, cooling towers, control systems, boilers and air handling systems, • Ability to learn commercial expertise in boilers, chillers, pneumatic controls, digital controls and packaged HVAC equipment, • Ability to read electronic schematics, • High School diploma/GED required + equivalent work experience Benefits: • Competitive salaries, • Medical, • Dental, • Vision, • 401(k) plan, • Paid Time Off, • Career advancement opportunities, • Training and Development, • Company Vehicle Build the future with MSS! A Crete United Company MSS (a Crete United company) is an equal opportunity employer, considering all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state of federal law. Women and minorities are encouraged to apply.

Job Description Multiple shifts available Job Title: EHS TechnicianJob Description The EHS Technician supports a safe and compliant industrial manufacturing environment by auditing critical equipment and processes, validating corrective actions, and reinforcing environmental, health, and safety standards across the facility. This role actively partners with operations teams to perform risk assessments, lead safety audits, and help drive a strong safety culture through training, communication, and continuous improvement. Responsibilities • Audit critical equipment and jobs for EHS compliance, including lockout/tagout (LOTO), combustible dust controls, cranes and hoists, machine guards and safety devices, confined spaces, electrical safety, and forklift operations., • Conduct regular 5S audits to ensure workplace organization, cleanliness, and safety standards remain in place and effective., • Review the routines and practices of Team Leaders and Supervisors who have EHS responsibilities to verify that they follow established procedures and meet compliance expectations., • Validate inspection findings that were closed the previous day to ensure corrective actions are completed, documented, and effective., • Participate in and validate EHS Toolbox Talks, Safety Alerts, and safety communication meetings to ensure key messages are accurate, relevant, and clearly delivered., • Participate in the immediate investigation of accidents and incidents, supporting root cause analysis and the development of corrective and preventive actions., • Review and validate proper authorization for high-risk activities and non-routine jobs, such as work at heights, confined space entry, electrical work, and hot work, ensuring required permits and controls are in place., • Perform risk assessments and safety audits to identify hazards, evaluate risk levels, and recommend practical controls to reduce or eliminate risks., • Support compliance auditing activities and assist in correcting identified deficiencies to maintain adherence to OSHA standards and internal EHS requirements.Essential Skills, • Experience with OSHA standards and practical application of OSHA requirements in an industrial environment., • Hands-on experience conducting risk assessments and safety audits in a manufacturing or industrial setting., • Knowledge of mechanical and manufacturing processes and how they relate to environmental, health, and safety risks., • Experience with EHS compliance activities, including auditing critical equipment and high-risk tasks., • Familiarity with ISO standards and EHS-related ISO audit practices., • Ability to participate in root cause analysis to identify underlying causes of incidents and nonconformities., • Understanding of electrical safety principles and safe work practices., • Experience supporting ergonomics assessments and improvements in industrial environments., • Strong troubleshooting skills to identify safety issues and propose effective corrective actions., • Ability to support compliance auditing and assist with correcting deficiencies identified during inspections.Additional Skills & Qualifications, • OSHA 10 Certification is preferred and considered an asset., • ISO audit experience, particularly related to EHS or quality management systems., • Experience with EHS Toolbox Talks, Safety Alerts, and safety communication activities., • Exposure to auditing or controlling high-risk activities such as work at heights, confined space entry, electrical work, and hot work., • Experience working within a stable, growth-oriented industrial or manufacturing organization. Job Type & Location This is a Contract to Hire position based out of Shreveport, LA. Pay and Benefits The pay range for this position is $30.00 - $33.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Shreveport,LA. Application Deadline This position is anticipated to close on Aug 6, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionSalary: $14.00 plus shift differential Job Title Behavioral Health Technician (BHT) Department: Nursing/Operations Operating Unit: Detox, Residential Treatment Reports To: Shift Nurse, Director of Nursing FLSA Status: Non-Exempt We are seeking a highly motivated and experienced Behavioral Health Techto join our team. The ideal candidate will possess excellent communication skills, demonstrate professional boundaries, and bring proven leadership experience in behavioral health settings. This role includes supervising direct care staff, ensuring high-quality client support, and assisting in maintaining a therapeutic and safe environment. Key Responsibilities: • Model and enforce professional boundaries and ethical practices, • Assist with scheduling, training, and performance evaluations, • Monitor client safety, behavior, and participation in treatment programs, • Respond effectively to crises and implement appropriate interventions, • Communicate clearly and professionally with clients, staff, and other stakeholders, • Ensure compliance with facility policies, procedures, and regulatory standards, • Report observations and incidents accurately and timely to clinical leadership SUMMARY The Recovery Advocate at UPRISING ADDICTION CENTER is responsible for performing advanced indirect and selected direct patient care duties in support of the clinical process in a competent manner under the direction of the program director or manager and for performing related clerical functions. AGE/PATIENT POPULATION(S) SERVED Age of Patient Population Served: Adult (18 & older) Population Served: Persons meeting DSM5 criteria for substance use disorders with or without co-occurring psychiatric illness EXPECTATIONS OF ALL EMPLOYEES • Adheres to allUPRISING ADDICTION CENTER Policies and Procedures, • Conducts self in a manner that representsUPRISING ADDICTION CENTER values at all times, • Maintains a positive and respectful attitude with all work-related contacts, • Communicates regularly with supervisor aboutdepartmental and UPRISING ADDICTION CENTER concerns, • Consistently reports to work on time, prepared to perform the duties of the position, • Meets productivity standards and performs duties as workload necessitates AGE SPECIFIC COMPETENCIES (ADULT, 18yrs+) 1. Allows patient to maintain control; involves patient in decision-making and planning of care, as appropriate to condition and situation., 2. Encourages participation in care., 3. Demonstrates clinical knowledge of expected adult vital signs., 4. Recognizes abuse/neglect potential., 5. Encourages family support., 6. Recognizes/respects concerns over interruption of work/plans/separation from family, etc., 7. Recognizes fears regarding potential life style changes., 8. Encourages verbalization of fears and anxiety; maintains age-appropriate communication Required Knowledge, Skills, and Abilities: • Knowledge of industry standards as related to the position of BHT., • Basic knowledge of PC software programs, particularly Microsoft Word and Excel is preferred., • Written and oral communication skills; must be able to concentrate on work amid distractions such as noise, conversations and foot traffic, • Must maintain self-control in volatile or hostile situations such as when verbally or physically confronted in an aggressive manner, • Must be able to work independently with little supervision in an unstructured environment with multiple demands, • Must possess a reading and writing level that provides for clear expression and/or understanding of assignments related to job description., • Ability to represent the program well in interactions both inside and outside the facility PHYSICAL DEMANDS/WORKING CONDITIONS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand or sit for extended periods of time. The employee must occasionally lift and/or move up to 25 pounds. The job requires frequent contact with water (hand washing and cleaning) and working with body fluid and hazardous chemicals. When under these working conditions, OSHA standards and universal precautions must be followed at all times. While performing the duties of this job, the employee must be able to work in a fast-paced environment with minimal to high volumes of stress. EEOC STATEMENT: It is our policy toabide by all Federal and State laws, as well as, the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a), prohibiting discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibiting discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplaceJOB SUMMARY The technicians must be able to complete diagnosis of any mechanical, electrical, or other various failures/breakdowns of a truck or its related equipment. This position will also perform disassembly, repair, and reassembly of truck engines, transmissions, carrier assemblies, clutches, brakes, electrical systems, and any other truck or related equipment adjustment/repairs. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Trained to use all tools of trade, including precision instruments and technical shop machines and diagnostic tools., • Use previous and on the job training to read and understand technical publications, including on-line service software and service bulletins. He/she must be able to use information contained in them to do their own work and to assist others concerning the content., • He/She will learn to determine usability of all component parts and must be able to list and order all needed parts using the dealer management system., • Must be able to complete work accurately and timely as outlined in published time standards guidelines., • Must be able to write and/or type a good description of all work performed on each individual repair using the dealer management system., • Ability to perform all aspects of the job safely and in accordance with OSHA and Bruckner’s rules and regulations expressed and implied., • Understands the importance of attendance and punctuality and how it directly impacts customer service., • Is a good steward of company tools and resources., • Achieves and maintains certifications as required by the company, the OEM’s or by Federal Law. EXAMPLES OF SKILLS NEEDED TO MASTER THIS LEVEL • P.M. Services, • Steam Clean, • P.D.I. Inspections, • Used Truck Inspections, • Wheel Seals, • Brake Adjustments, • Clutch Adjustments, • Pinion Seals, • Foundation brake replacement (shoes, drums, & hardware), • Battery diagnoses & replacement, • U-joints, • Shocks, • Small make ready items (mudflaps,1/4 fenders, bug screens, bug shields, & bumpers) POSITION REQUIREMENTS Education & Experience:, • High School Diploma desired., • Must possess and use good interpersonal skills to interact well with customers, vendors, and co-workers in a positive and constructive manner., • Dealership experience is preferred, • Must be able to operate various computer diagnostic devices, laptops, and tablets. Physical Demands: • Involves essential ability to maneuver around, in, on and under trucks in order to properly inspect and diagnose all types of problems and repairs., • Must be able to pass a physical and drug and alcohol screens during pre-employment screening, randomly and/or as requested throughout employment., • Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Work Conditions: The working environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Due to the urgency of some repairs, this position contains some level of stress and requires the ability to handle multiple tasks smoothly. Requires regular, predictable attendance. Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for a full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Shreveport, LA area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Alignment Technician Automotive Alignment technicians use the latest equipment to align newly-mounted tires and wheels on customer's vehicles. By measuring and adjusting caster, camber, toe and thrust angles, our Automotive Alignment Technicians reduce customer's tire wear and ensure serviced vehicles travel straight and true. Mavis's Alignment Technicians also complete state-mandated inspections, oil and filter changes and flat repairs, and perform any other required automotive service or vehicle repairs to customer vehicles. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Alignment Technicians you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess 1 year of experience and/or training in dismounting, mounting, rotating and balancing tires or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position. In addition, it is preferred that Alignment Technicians possess a state inspection license. As an active position, Automotive Alignment Technicians are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle and tire maintenance and repair. Alignment Technicians must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro Company DescriptionMavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240646

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240642

Job Description On-Call IT Field Technician – PC, Mac, POS and TV Mounting • Location: Multiple U.S. Cities (Local, Onsite Support), • Job Type: Independent Contractor (1099), • Pay: $35 per hour (on-site), • Schedule: Flexible – You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities • Troubleshoot and repair Windows and macOS issues, • Resolve WiFi, router, and wired network problems, • Install and configure printers and scanners, • Replace or upgrade hardware components, • Reinstall operating systems using bootable tools, • Document work and communicate clearly with customers, • Install and support POS systems and run Cat5e or Cat6 cabling, • Perform outdoor TV mounting and basic AV setup Requirements • Two or more years of experience in IT support or field service, • Strong networking and diagnostic skills, • Reliable transportation and valid driver’s license, • Ability to work independently and provide professional customer service, • Ability to lift up to 50 lbs, • Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits • IT and POS work: $35 per hour for time on site, • Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely What to Expect After You Apply • Intro Call – A recruiter will contact you for a quick chat, • Onboarding – Complete paperwork and tax forms electronically, • Background Check – Mandatory before activation, • Set Your Availability – You enter your availability in our tech portal, • Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills

Job DescriptionSummary Our client is a growing Managed Services Provider (MSP) in the Shreveport, LA area and they are in immediate need of aHelp Desk Support Level IITechnician. This individual should have proven experience with technology and outstanding personal communication skills. Additionally, this technician should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Required to have worked in an MSP environment in the past to be considered., • Minimum of 3years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 2-3 years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Shreveport, LA

Job DescriptionSummary Our client is a growing Managed Services Provider (MSP) in the Shreveport, LA area and they are in immediate need of a Help Desk Support Level I-2 Technician. This individual should have proven experience with technology and outstanding personal communication skills. Additionally, this technician should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Help Desk Support - Work with pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • New User On-boarding, • Help troubleshoot Windows Servers and Active Directory, • Troubleshooting Local Area Networks, • Help monitor network security, • Troubleshooting VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response.Qualifications & Requirements, • Preferred having worked in an MSP environment in the past to be considered., • Minimum of 1-2 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tools and PSA Ticketing Software solutions are a plus, • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plusIdeal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Job Description Service Technician – Automotive We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership has to treat them right by paying them well and offering room for learning and advancement. Here, you’ll work alongside some of the best in the business and make great money while doing it. If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let’s talk! Job Responsibilities • Examine and diagnose vehicles, • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work in cooperation with shop foreman, • Provide labor estimates to service advisor, • Monitor repair time and update service advisor, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Assist in mentoring technician trainees, • Attend company and factory training, • Keep current with factory technical bulletins, • Understand and follow federal, state and local regulations (such as disposal of hazardous waste) Education and/or Experience High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver's License & State Inspection License Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Benefits Offered • Medical, • Dental, • Vision, • 401(k), • Basic Life Insurance, • Accident & Critical Illness Insurance, • Paid Training, • Short Term Disability, • Employee Discount Program About Us Family Car Group is a reputable, well-established, family-owned, and operated auto dealership group with a strong presence in our community. Our dealerships are dedicated to providing an amazing car-buying experience and provide a large selection of high-quality vehicles. Our goal is to dramatically enhance the car buying and servicing experience for our customers by building relationships based on mutual respect and complete transparency. Family Car Group is interested in finding talented individuals who are looking for a rewarding and challenging career in the automotive industry. We offer an excellent benefit package and a great working environment with many different employment opportunities ranging from sales to service to management. If you want to set yourself apart from the ordinary routine of the average job, possess the unique ability to consistently provide outstanding customer service, and have a dedication to excellence. Apply today!

Job DescriptionSteerBridge Strategies is a modern technology company delivering innovative, mission‑focused solutions to the U.S. Government and private sector. Leveraging deep expertise in federal acquisition, digital transformation, and emerging technologies, we deliver agile, commercial‑grade capabilities that accelerate operational effectiveness and drive measurable mission success.At the core of SteerBridge is our people—especially the veterans whose leadership, problem‑solving mindset, and commitment to excellence elevate every project we support. We don’t simply hire exceptional talent; we cultivate it, creating meaningful career pathways for veterans, military spouses, and professionals who share our passion for advancing technology and strengthening the missions we serve. Position Overview As a Tier 1 Help Desk Technician, you will serve as the first point of contact for VA end users requiring technical assistance. You will support customers through multiple communication channels including phone, email, chat, text, and self-service portals while ensuring timely resolution and escalation of incidents and service requests. This role is ideal for customer-focused professionals who thrive in fast-paced environments and are passionate about delivering exceptional support experiences. Responsibilities • Handle incoming support requests via phone, email, chat, text, and web portal submissions, • Serve as the primary point of contact for end users regarding incidents and service requests, • Create, document, categorize, prioritize, and track tickets through resolution, • Provide end-to-end ownership of incidents and service requests, • Escalate issues to appropriate support teams when necessary, • Maintain communication with users throughout the ticket lifecycle, • Perform warm transfers to resolver groups as required, • Ensure timely response and resolution based on priority and impact, • Support business-critical and high-priority requests according to established proceduresBenefits, • Health insurance, • Dental insurance, • Vision insurance, • Life Insurance, • 401(k) Retirement Plan with matching, • Paid Time Off, • Paid Federal HolidaysRequired Qualifications, • Must be a U.S. Citizen, • Must reside in Louisiana and be able to work on-site in Bossier City, LA, • Must be eligible to obtain a Public Trust Clearance (federal background investigation), • Bachelor's degree preferred; equivalent experience may be substituted, • Strong customer service and communication skills, • Ability to support customers through phone, email, chat, and text channels, • Demonstrated ability to provide accurate information and achieve high first-call resolution rates, • Ability to work effectively in a fast-paced, team-oriented environmentPreferred Qualifications, • 1+ year of Help Desk, Service Desk, or Call Center experience, • Experience using ServiceNow or similar ticketing systems, • Previous experience supporting a federal government customer, • Technical troubleshooting experienceAdditional Information, • Training is provided, • Employment is contingent upon successful completion of the federal background process, • Position supports a 24x7x365 operation; schedules may vary based on business needsSteerBridge Strategies is proud to be an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants and employees are treated with respect and dignity—regardless of race, color, gender, age, religion, national origin, ancestry, disability, veteran status, genetic information, sexual orientation, or any other characteristic protected by law.We also provide reasonable accommodations for individuals with disabilities in accordance with applicable laws. If you require assistance during the application process, we encourage you to reach out so we can support your needs. If you would like information about how your application is processed, please contact us.

Job DescriptionCompany Description Orr BMW, located in Shreveport, LA has immediate opportunities for technicians to become part of the BMW family! Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience. Qualifications • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information All your information will be kept confidential according to EEO guidelines. #automotive #technician #mechanic #BMW #ASE

Job Description Service Technician – Automotive We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership has to treat them right by paying them well and offering room for learning and advancement. Here, you’ll work alongside some of the best in the business and make great money while doing it. If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let’s talk! Job Responsibilities • Examine and diagnose vehicles, • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work in cooperation with shop foreman, • Provide labor estimates to service advisor, • Monitor repair time and update service advisor, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Assist in mentoring technician trainees, • Attend company and factory training, • Keep current with factory technical bulletins, • Understand and follow federal, state and local regulations (such as disposal of hazardous waste) Education and/or Experience High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver's License & State Inspection License Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Benefits Offered • Medical, • Dental, • Vision, • 401(k), • Basic Life Insurance, • Accident & Critical Illness Insurance, • Paid Training, • Short Term Disability, • Employee Discount Program About Us Family Car Group is a reputable, well-established, family-owned, and operated auto dealership group with a strong presence in our community. Our dealerships are dedicated to providing an amazing car-buying experience and provide a large selection of high-quality vehicles. Our goal is to dramatically enhance the car buying and servicing experience for our customers by building relationships based on mutual respect and complete transparency. Family Car Group is interested in finding talented individuals who are looking for a rewarding and challenging career in the automotive industry. We offer an excellent benefit package and a great working environment with many different employment opportunities ranging from sales to service to management. If you want to set yourself apart from the ordinary routine of the average job, possess the unique ability to consistently provide outstanding customer service, and have a dedication to excellence. Apply today!

Job DescriptionSalary: $14 per hour DOE Job Title Behavioral Health Technician (BHT) Department: Nursing/Operations Operating Unit: Detox, Residential Treatment Reports To: Shift Nurse, Director of Nursing FLSA Status: Non-Exempt Approved By: Kristi Bierbaum, COO Approved Date: 4/5/2021 MISSION STATEMENT The mission of UPRISING ADDICTION CENTER is to offer the highest quality and professional, Inpatient Detoxification, Residential Treatment, Partial Hospital Program (PHP), Intensive Outpatient Program (IOP), and Outpatient services. We are committed to treating patients and their families with the highest regard and respect as clients work toward reaching their highest growth potential in their recovery process. This is accomplished through the strict adherence to the highest ethical standards of care and policies and procedures set forth by the Lousiana Department of State of Health Services and the Joint Commission. UPRISING ADDICTION CENTER ensures all clients are treated with compassion, respect, and dignity regardless of race, creed, age, sex, handicaps, or sexual orientation. UPRISING ADDICTION CENTER employees are competent and responsible personnel who adhere to a strict code of professional ethics which include but are not limited to the prohibition of fraternization with patients, exploitation of clients, or any criminal behaviors. UPRISING ADDICTION CENTER provides clients with accurate and complete information regarding the available services including the program rules, regulations, goals and objectives of the program. Appropriate availability of alternative treatment modalities is made at any time before during or after treatment if they are requested or the clients needs are out of the scope of our practice. UPRISING ADDICTION CENTER will ensure that discharge from treatment is conducted in accordance with Louisiana rule standards. UPRISING ADDICTION CENTER provides both Louisiana and Joint Commission environment of care standards. UPRISING ADDICTION CENTER will take all necessary and appropriate measures to maintain individual client records and information in a confidential and professional manner. UPRISING ADDICTION CENTER strives to maintain positive relations with the surrounding community and pursues every reasonable action to encourage responsible client behaviors and community safety. SUMMARY The Recovery Advocate at UPRISING ADDICTION CENTER is responsible for performing advanced indirect and selected direct patient care duties in support of the clinical process in a competent manner under the direction of the program director or manager and for performing related clerical functions. AGE/PATIENT POPULATION(S) SERVED Age of Patient Population Served: Adult (18 & older) Population Served: Persons meeting DSM5 criteria for substance use disorders with or without co-occurring psychiatric illness EXPECTATIONS OF ALL EMPLOYEES Adheres to all UPRISING ADDICTION CENTER Policies and Procedures Conducts self in a manner that represents UPRISING ADDICTION CENTER values at all times Maintains a positive and respectful attitude with all work-related contacts Communicates regularly with supervisor about departmental and UPRISING ADDICTION CENTER concerns Consistently reports to work on time, prepared to perform the duties of the position Meets productivity standards and performs duties as workload necessitates ESSENTIAL DUTIES AND RESPONSIBILITIES Delivers appropriate indirect and selected direct patient care at a competent level as directed by a program manager and/or director, physician, registered nurse or licensed vocational nurse within the scope of approved Recovery Advocate skills inventory according to the needs/age of the patient/population served; collaborates with other members of the healthcare team to plan, expedite and promote quality patient care; employs critical thinking skills when identifying and responding to patient needs. Performs, monitors and documents vital signs. Collects urine drug screens on all admissions and random UDS on all RTC, PHP and IOP patients, as appropriate. Attends facility/community meetings and groups, conducts Program Orientation, searches belongings, collects unauthorized items to be placed in a secured area; conducts patient rounds and perimeter checks every thirty minutes to ensure the safety of all patients. Observes clients self-administermedication accordingtophysician orders and/orpharmacy label. Documents if anyreasons for refusal,side effects andcomplaintsconcerning medicationand immediately notifies Operations by end of shiftby preferred method of communication. • Checks the integrity of all medicationsbrought onto the unit that are prescribed by an outside provider, family and/or client andverifiesmedicationthroughthe use of PDR., • Monitors clients whereabouts and documents anysignificantclient issues within the daily shift notes and immediately notifies Operations by end of shift bypreferredmethod of communication. Ensures safe care to patients adhering to policies, procedures, and standards of care, Promotes individual professional growth/development by meeting requirements for mandatory/continuing education/skills competency; supports department goals which contribute to the success of the organization. Performs basic housekeeping duties during course of shift, including but not limited to, cleaning rooms and bathrooms (toilets, sinks, showers), cleaning microwaves, cleaning dirty utility rooms, doing laundry, sweeping and mopping floor, trash collection, making beds, etc. Performs other duties and tasks as required. When required to transport patients: Prior to transporting patients, ensure that there are no alert signals active (i.e., check engine light, TMPS system, etc.) and that tires are properly inflated in accordance with manufacturer standards. Accompany and transport patients as assigned. Arrives promptly and ensures patients prompt arrival for appointment. Follows vehicle operation rules. Practices defensive driving techniques Be able to verbalize protocol for transportation safety and for management of out-of-control behaviors. Reports to Nursing or Lead BHT concerns and/or issues related to clients transportation. AGE SPECIFIC COMPETENCIES (ADULT, 18yrs+) 1. Allows patient to maintain control; involves patient in decision-making and planning of care, as appropriate to condition and situation., 2. Encourages participation in care., 3. Demonstrates clinical knowledge of expected adult vital signs., 4. Recognizes abuse/neglect potential., 5. Encourages family support., 6. Recognizes/respects concerns over interruption of work/plans/separation from family, etc., 7. Recognizes fears regarding potential life style changes., 8. Encourages verbalization of fears and anxiety; maintains age-appropriate communication MINIMUM JOB REQUIREMENTS Education, Training, and Experience Required: High School diploma or equivalency or 1 year work experience preferably in the field of chemical dependency and/or behavioral health. Preferred: Experienced as a BHT, Director Care Staff or Behavioral Health or Mental Health Technician, preferably in the field of chemical dependency and/or behavioral health. To transport patients: Must possess a valid, drivers license and have a clear driving record. Required Knowledge, Skills, and Abilities: Knowledge of industry standards as related to the position of BHT. Basic knowledge of PC software programs, particularly Microsoft Word and Excel is preferred. Written and oral communication skills; must be able to concentrate on work amid distractions such as noise, conversations and foot traffic Must maintain self-control in volatile or hostile situations such as when verbally or physically confronted in an aggressive manner Must be able to work independently with little supervision in an unstructured environment with multiple demands Must possess a reading and writing level that provides for clear expression and/or understanding of assignments related to job description. Ability to represent the program well in interactions both inside and outside the facility PHYSICAL DEMANDS/WORKING CONDITIONS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand or sit for extended periods of time. The employee must occasionally lift and/or move up to 25 pounds. The job requires frequent contact with water (hand washing and cleaning) and working with body fluid and hazardous chemicals. When under these working conditions, OSHA standards and universal precautions must be followed at all times. While performing the duties of this job, the employee must be able to work in a fast-paced environment with minimal to high volumes of stress. EEOC STATEMENT: It is our policy toabide by all Federal and State laws, as well as, the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a), prohibiting discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibiting discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job Description Location: 601 Milam St, Shreveport, LA 71101 POSITION SUMMARY The entry-level NOC Technician I primary role is to provide 24x7 Monitoring of Customer and DartPoints specific alerts, technical customer support to clients, and provide internal support to NOC team members. PRIMARY RESPONSIBILITIES • Assist customers with onsite installation and service requests., • Assist with colocation equipment installations., • Provide immediate customer interaction support via ACD, e-mail and portal request., • Consistent monitoring of all events related to facilities, managed services, network, and power., • Physical server monitoring, management, and support., • Perform routine routines and equipment readings throughout data center facility., • Maintain a working level of proficiency with all DartPoints’ co-location, Cloud, and Managed Service platforms. • Actively monitor all security and video surveillance systems., • Serve as backup to local teams for facility related activities., • Establish and maintain security access via badge and biometrics for all customers., • Properly identify all visitors and provide escort to specified premise equipment., • Maintain and monitor ticket queue and assist in the ticket quality and review process., • Receive, pack and ship customer equipment as required., • Ensure escalation events and issues are routed to proper departments in pre-determined periods of time. • Maintain and manage DartPoints abuse inquiries and notices to customers., • Provide Initial troubleshooting of customer related issues and events., • Routine updates DartPoints’ Knowledge Base (KB) including documentation of changes., • Other duties as assigned by Supervisor or Manager. QUALIFICATIONS & PREREQUISITES • Required, • High School Diploma or Equivalent, • College course work in related field or equivalent work experience, • Must have a valid driver’s license, reliable transportation and be able to pass a full background check. • Demonstrated ability to work in a team environment., • Experience in a customer service, technical or client support role, • Strong organizational & time management skills required., • Proficiency in MS Office products, • Excellent communication and interpersonal skills; ability to work with all levels of organization. • Employees must complete individual quarterly objectives as assigned., • Employees must demonstrate commitment to all corporate core values: Customers First, Integrity, Initiative, Problem-Solving • Preferred, • Help Desk or Data Center experience – 0 - 2 years., • Experience with ConnectWise, or other ITSM applications – 0 - 2 years, • Troubleshooting process and procedures – 0 - 2 years, • Certifications: CCNA, CCNP, Network+ Other • Must be able to work flexible day and evening hours, weekends, and holidays., • Must be able to climb ladders and assist with installations., • Must be able to lift equipment and packages of 50lbs or greater., • Exposure to moderate noise levels BENEFITS • 401K Retirement (must be 21 years old), Health Insurance, Life Insurance, Short Term Disability Disclaimer: This job description has been designed to indicate the general nature and level of work performed by employees within this position and may change at any time with or without notice. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Shift - M-F 2pm-10pm

Job DescriptionDEPARTMENT: Service REPORTS TO: Service Manager JOB SUMMARY: This position performs basic repairs of small engine power equipment such as chainsaws, agricultural and outdoor power equipment under the direction of a Service Manager or senior technician. This position learns new processes and techniques by participating in on-the-job training. It is important for this position to have a fundamental knowledge of engines, hydraulics, power-trans, air-conditioning, and electrical systems as they apply to machines marketed by Goldman’s dealership. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform basic service job tasks as assigned., • Develop skills in removal, disassembly, and reconditioning of components., • Perform routine maintenance checks servicing fuel, power train, electrical & hydraulic systems to ensure peak performance, safety, and longevity of the equipment., • Participate in Service EDUCATE training programs required for the development of skills and knowledge of Deere products., • Assist senior technicians as needed., • Maintain the condition of service vehicles, trailers, tools and equipment., • Maintain a clean work area and perform job tasks in a neat and orderly fashion., • Follow all safety rules and procedures and participate in safety meetings and training., • Prepare all reports and forms required in conjunction with work assignments., • Account for all time and material used in performing assigned duties., • Perform pre-delivery set-up and inspection on new equipment when required. NON-ESSENTIAL DUTIES AND RESPONSIBILITIES: • Learn company philosophy regarding customer value., • Work within departmental budgetary plan., • Other duties and projects as may be assigned or re-assigned from time to time. SUPERVISORY RESPONSIBILITIES: Mentor to Service Set-up Technician QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: • High School Diploma or GED equivalent required, • Good Math skills, • Secondary education or training in heavy equipment mechanics that includes electronics and hydraulics is beneficial, • 1 year experience repairing agricultural equipment/outdoor power equipment, John Deere specifics, preferred, • 1 year experience performing simple welds, welding techniques, • 1 year experience in standard computer software, internet Knowledge, Skills, and Abilities: • Proven knowledge of methods, materials, tools, and techniques used in the repair of outdoor power equipment/agricultural equipment., • Fundamental knowledge of engines, hydraulics, power-trans, air-conditioning, and electrical systems as they apply to machines marketed by the Dealership., • Ability to work varying shifts, weekends, and holidays., • Ability to use Service Advisor and basic computer functions, • Ability to deal with employees and public in a courteous, tactful, and patient manner., • Ability to take initiative and organize responsibilities and job duties to obtain maximum effectiveness., • Ability to “think outside the box” and use creative thought processes in problem solving., • Ability to understand and carry out upper management requests., • Good skills in operating vehicles and equipment used for diagnostic purposes., • Good technical skills., • Good listening skills., • Good written communication skills., • Good observation skills., • Good interpersonal skills. SPECIAL REQUIREMENTS: • Prompt and regular attendance, • Valid driver’s license required, • Forklift certification required, • Strong Customer orientation, • Display Positive Energy, • Team player, • Must meet and exceed all requirements of the Service Set-up Technician position SERVICE EDUCATE JDU COURSE REQUIREMENTS: Following is a listing of the Basic John Deere courses required to successfully gain fundamental knowledge and skills. This is the beginning of the Technician’s “learning path” and requires a total of 62 Credit Hours. Technicians must take a MINIMUM of 20 Credit Hours per calendar year. • Basic Service Advisor, • o Service Advisor Methods & Technicians (8 Classroom Credits), • o Service Advisor Overview (6 DLM Credits), • Basic Hydraulic, • o Hydraulic Methods & Techniques (8 Classroom Credits), • o Hydraulic Systems I (6 DLM Credits), • o Hydraulic Systems II ( 6 DLM Credits), • Basic Electrical, • o Electrical Methods & Techniques (16 Classroom Credits), • o Electrical Systems I (6 DLM Credits), • o Electrical Systems II (6 DLM Credits) EQUIPMENT OPERATED: • Hand and power tools, • Computer, • Welding equipment, • Wide range of agricultural, industrial (motorized), and Consumer power equipment PHYSICAL QUALIFICATIONS AND WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to sit, stand, walk, talk, hear, use hands to finger, handle or feel objects, tools, or controls, reach with hands or arms; occasionally required to climb and maintain balance, stoop, kneel, crouch or crawl., • The employee must regularly lift and/or move up to 50 pounds with assistance if needed, frequently lift and/or move 20 pounds, and occasionally lift and/or move up to 75 or more pounds with assistance., • Specific vision abilities required by this job include close and distance vision, the ability to distinguish and identify colors, depth perception, peripheral vision, and the ability to adjust focus., • The noise level in the work environment is usually moderate to loud., • The working environment while performing the duties of this job will require the employee to frequently work near moving mechanical parts and occasionally be exposed to outdoor weather conditions, extreme cold (weather), extreme heat (weather), and vibrations. SELECTION GUIDELINES: Formal application, rating of education and experience, oral interview and reference check. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.

Job Description GENERAL JOB DESCRIPTION The Senior Technician is a heavy equipment mechanic that specializes in the modernization and repairing of cranes. This position may perform routine maintenance, troubleshooting, repairs and upgrades; as well as solving complex problems when the crane malfunctions. This position must encompass self-sufficiency, leadership abilities, effective communication and professionalism in an effort to lead field technicians and be the liaison between HCSG management and customers. The Technician position works in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES • Must be able to be on-call and provide after hour services as required., • Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations., • Train and mentor field technicians, • Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders., • Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis., • Consult with customers regarding all repair and safety related issues and discuss recommendations that will assist the customer with improving their services., • Maintain all company issued equipment, vehicle, and assets in a safe and proper working order., • Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies., • Maintain supply of HCSG forms and miscellaneous materials in the company vehicle., • Maintain the ability to work with others in team environment., • Attend company provided trainings and seminars as required., • Participate in HCSG 5 Marks program, • Other duties as assigned PHYSICAL DEMANDS The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceedingly over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20-50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS • At least 5-7 years of crane repair & maintenance experience, • At least 3-4 of years electrical and/or mechanical experience in lieu of crane repair & maintenance experience., • Must have a valid drivers license and acceptable driving record, • Must always commit to working and driving safely, • Must be willing to work off the ground at various heights, • Must have basic computer skills to work with web-based crane inspection programs, • Must be able to communicate well with others and work independently or as a team, • Knowledge of hand tools and/or possess hand tools PREFERRED QUALIFICATIONS • Vocational/Technical training certificate Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Job Description ELECTRICAL TECHNICIAN/MAINTENANCE Location: Shreveport Louisiana 71115 Position: Full-time DIRECT HIRE QUALIFICATIONS • Completed technical school in electrical or electronic technology, • 3+ years as an electric technician on industrial company, • Experience troubleshooting AC and DC motors RESPONSIBILITIES • Follow practices and procedures established for their job., • Responsible to properly operate and maintain equipment and tools related to job role., • Responsible for meeting the safety standards of his department including the use of personal protective equipment for different job tasks according to the company policies and practices. Housekeeping according to the Area Plan and after any performed job., • Works within the Quality System. Required to attend company training, safety and technical programs, when scheduled. Complying with roles, responsibilities and provisions of one’s job description. Objectives • Responsible for executing all the corrective maintenance to keep equipment utilization at maximum capacity for production plans. Support with preventive work orders schedule on shift., • Perform all types of maintenance and repairs associated with their profession or specialty. (Mechanical, Electrical, Welding, Hydraulic, etc.)., • Perform inspection and activities regarding overall Plant Maintenance Asset Conservation. Communicate detailed and accurate data regarding delays and failures., • Able to read blueprints, sketches, tables and schematics. Give supports to the reliability technical groups in all areas when opportunity and priorities are completed., • Support contract vendors with assign duties to complete outside work assignments., • Assure the necessary resources (spare parts, materials, labor, mobile equipment and construction machinery) and the implementation of services need it to perform work assignments., • Execute required maintenance duties to maintain shift operations without supervision on off shifts., • Give feedback to the Maintenance Supervisor or Leaders about operations, incidents, safety, and important follow up activities., • Ensures work order generation for every delay and maintenance emergency tasks or non-scheduled jobs in their shift., • Perform additional maintenance-related duties as assigned.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237120

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237116

Job Description Coming February 1st, 2026! We're gearing up for an exciting new chapter and are looking for great people to join us. Special Projects Team/Floor/Heavy Duty Tech $15.00-16.00/hour Full-Time THE BURKS COMPANIES, INC. (TBC) is looking to hire a full-time Specialty Technician team member who is experienced with multiple floor surfaces, a carpet technician, and has an extensive custodian background. Our Specialty Technicians are the core of who we are as a company. We achieve the highest standards of cleanliness and appearance for high profile clients by retaining an awesome team. That is why we offer a comprehensive benefits program (medical, dental, vision, life insurance as well as holiday and vacation pay), a positive work culture, opportunities for growth, and more! WHAT DOES THE DAY IN THE LIFE OF A TBC SPECIALTY TECHNICIAN LOOK LIKE? As a floor and carpet technician, custodian, our Specialty Techs enjoy floor care. Whether it is marble polishing, detail scrubbing tile, restoring grout floors in restrooms, stripping, waxing, or burnishing floors, to shampooing and extracting carpet. You are responsible for performing heavy duty floor maintenance work, refinishing tile floors, pressure washing, high-dusting and other specialty projects assigned. TBC' Specialty teams are the core of obtaining the overall goal of customer satisfaction. Specialty Techs report maintenance repair problems and make sure all floor equipment is clean and properly maintained after each use. Safety Techs often operate expensive and powerful equipment that if not properly operated can result in permanent physical and property damage. Therefore, this team must follow concise safety precautions and measures at all times. We have a reputation for quality work, and this is partly thanks to the great job that you do! QUALIFICATIONS FOR A FULL-TIME FLOOR TECHNICIAN / CUSTODIAN / PROJECTS TEAM • 21 years old or older, • Ability to occasionally lift up to 75 lbs and perform general Floor Technician / Custodian / Projects Team Service tasks including bending, kneeling, reaching, and being on your feet for an entire shift., • At least 3-5 years experience as a floor tech with knowledge of operating large machines throughout large commercial complexes., • Extensive knowledge of floor care. AND WHAT ELSE? • Specialty Techs will often be required to perform standard upkeep and maintenance of large equipment., • Maintenance repair problems will be reported directly to the Project Manager., • Specialty Techs take ownership to make sure that all floor equipment is clean and maintained after each use and that all safety precautions are followed at all times., • Specialty Techs will perform all duties of EVS cleaners and general cleaners on a larger scale., • Performs all other related duties as assigned. PHYSICAL DEMANDS AND WORKING CONDITIONS • Frequent standing, walking, climbing stairs, bending, and squatting is required., • Frequent lifting of more than 40 pounds is required. READY TO JOIN OUR AWESOME COMMERCIAL CLEANING TEAM? Please complete our initial 3-minute, mobile-friendly application. We look forward to meeting you! THIS COMPANY IS AN EQUAL OPPORTUNITY EMPLOYER The above statements are intended to describe the general nature and level of the work being performed by incumbents assigned to this position. This is not an exhaustive list of all duties and responsibilities. The Burks Companies, Inc. reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Directly relate experience/education beyond the minimum stated may be substituted where appropriate. Job Posted by ApplicantPro

Job DescriptionDescription: TAS Environmental Services, LP- Emergency Response Services & Environmental Solutions ready to respond wherever, whenever, every time. TAS Environmental Services is headquartered in the Dallas, Texas area and serves companies of all sizes across the South and into the Midwest. For over 100 years, our industrial economy has been built on Oil & Gas, technology, and infrastructure. Today, it is essential for every business and municipality to have a "go-to" vendor for environmental solutions, from industrial cleaning services to emergency response services, to hazardous waste transportation and box rentals. We are prepared 24/7 and every day of the year. We are hiring a Technician. At TAS Environmental Services, LP, the Technician will assist in the day-to-day operations to include emergency response, cleaning of equipment, inventory of supplies and assets, and industrial tank cleaning. Potential for dirty and physically demanding work environment along with strenuous physical labor. BENEFITS TAS Environmental Services offers a competitive benefits program, including comprehensive group health and related benefits plan. The following list of benefits is offered only to employees in regular (full-time) positions: • Health & Wellness:, • Comprehensive Medical, Dental, and Vision Coverage, • Mental Health Support Programs, • Supplemental Benefits - Accident, Critical Illness, etc., • Access to a company provided Employee Assistance Program, • Retirement & Financial:, • 401(k) with Company Match, • Life Insurance and Disability Coverage, • Work-Life Balance:, • Generous Paid Time Off (PTO), • Paid Time Off increases based on years of service, • Holidays - seven (7), • Floating Holidays - two (2), • Professional Development:, • Access to Online Learning Platforms, • Annual Conference and Workshop Allowances, • Additional Perks:, • Work Boot Program, • Team Building Events RESPONSIBILITIES • Handling various products, hazardous and non-hazardous materials, • Performing industrial work and biohazard cleanups, • Staging, profiling, and processing for disposal hazardous and non-hazardous waste, • Assist in the removal of soil, debris and other materials, and cleaning up spill sites, • Operate and clean equipment., • Maintaining logs of working hours in compliance with all applicable state and federal regulations, • Up to 25% travel as needed - location may differ, • Other duties as assigned COMPETENCIES/SKILLS • Strong observation skills, • Technical proficiency with field equipment, • Knowledge of environmental regulations, • Data collection and analysis skills, • Ability to work outdoors in all weather conditions, • Excellent communication skills, • Proficient in critical thinking, • Teamwork oriented Requirements: EDUCATION REQUIREMENTS • HAZWOPER and Confined Space certifications preferred PHYSICAL/MENTAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to talk and hear. This position requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing at times. The employee must frequently lift or move items up to 60 pounds. Must be able to frequently climb stairs and ladders. May occasionally deal with heights. Excellent interpersonal skills: ability to establish and maintain effective relationships with staff, employees and managers. Effective conflict resolution abilities. Ability to present facts and recommendations effectively in oral and written form. Ability to read, write and do mathematics. Ability to wear Personal Equipment, including Respiratory Protection. Consist of both office setting and physical jobsite. Able to work in confined spaces when needed. Class C (Texas) or equivalent required EEO/AA EMPLOYER/ VET/ DISABLED STATEMENT TAS Environmental Services, LP provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law TAS Environmental Services, LP is recognized as a leading regional provider of Environmental Services. Our service offer includes Emergency Response, Industrial Cleaning, Waste Management and Midstream Services and Solutions. Our mission is to build unrivaled partnerships by being an invaluable safe resource to our customers through knowledge, collaboration and the dedication of our people. We aim to deliver best-in-class performance across the business system while adhering to our core values and while owning the highest standard of ethical business practices.

Job DescriptionDescription: RNR Tire Express is a national franchise retailer that provides safe, quality tires and wheels with affordable payment options. At RNR we have built a culture around “SERVING our customer and not just providing them customer service”. We support and empower our employees with excellent training and tools which enables them to provide our customers with a unique and exceptional experience. RNR Tire Express started as a family business over 20 years ago in a small shop located in Tampa, Florida. Since then, we have grown to over 160 stores across 26 states, and continue to open more locations across the country each year. While we have expanded far beyond that little shop in Tampa, we have never lost our core value of FAMILY. At RNR, we believe having a healthy work / life balance is critical to the success of our team. That is why we offer flexible schedules and are closed every Sunday to make sure you don’t miss out on the most important moments in life. We also believe in rewarding our team for their hard work, which is why our hourly pay and commission structure is one of the best in the business. At RNR Tire Express, we understand that happy employees make for a productive team. We work to accomplish that by providing outstanding benefits. • Two Medical Plan Options, • Health Savings Account, • Dental & Vision, • Employer Paid Life, • 401(k) with Company Match, • Paid Vacation, • Employee Assistance Program, • And More JOB SUMMARY: Shop Technician is responsible for overseeing all activity in the installation shop. The Shop Technician ensures that all paperwork related to installs or removals is completed properly, inventory is appropriately maintained and monitored, and that proper tools and equipment are always in the shop. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Mastery of knowledge and application torque/re-torque procedures as it applies to each vehicle., • Places product and supply orders., • Check-in delivered merchandise., • Ability to mount, balance & install tires & wheels., • Use of tire and balancing machines., • Labels merchandise with item numbers., • Organizes delivered merchandise according to customer orders., • Handles “Return to Vendor” merchandise when necessary., • Identifies and properly tags turned-in products., • Cleans and maintains turned-in products., • Maintains and organizes system of storing used tires., • Controls parts spending., • Provides excellent customer service., • Other duties as assigned. SUPERVISORY RESPONSIBILITIES: None. Requirements: COMPETENCIES: To perform this job successfully, an individual should demonstrate the following competencies: • Knowledge as an automotive technician, auto tech, tire tech, wheel specialist, or alignment tech will contribute to the success of this job. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE: High school diploma or equivalent. CERTIFICATES, LICENSES, REGISTRATIONS: Tire Industry Association (TIA) Certification, provided by the company. LANGUAGE SKILLS: Ability to read work orders. MATHEMATICAL SKILLS: Basic counting skills. REASONING ABILITY: Ability to apply understanding to carry out instructions furnished in written or oral form. COMPUTER SKILLS: To perform this job successfully, an individual should have knowledge of industry standard software. OTHER QUALIFICATIONS: Must have a valid driver license and have a clean driving record. PHYSICAL DEMANDS: • Must be able to work safely in a noisy area., • Must be able to lift 30 lbs. regularly., • Must be able to inspect vehicle to determine repairs needed., • Good vision to inspect repair work., • Must be able to bend, stretch, kneel, and squat to perform repairs and inspections. WORK ENVIRONMENT: Duties are performed in a garage environment. The noise level in the work environment is usually loud. OTHER REQUIREMENTS: • Valid state driver license with a clean driving history. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243114

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243110

Job DescriptionBenefits: • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Dental insurance Construction Craftsman / Property Restoration TechnicianLocation: Shreveport-Bossier City, LA We're Not Looking for Average Construction Workers. We're building one of the most organized and professional property restoration and reconstruction teams in Louisiana. If you're looking for a job where you can show up late, leave trash behind, and do "good enough" work, this isn't the place for you. If you take pride in your craftsmanship, enjoy solving problems, like working with your hands, and want to become part of an elite team that values quality and professionalism, we'd like to meet you. What You'll Do No two days are the same. Our crews complete a variety of residential and commercial projects including: • Property Make Ready services, • Punch list repairs, • Drywall repair and finishing, • Texture matching, • Interior painting, • Trim installation, • Door and hardware installation, • Flooring repairs, • Cabinet adjustments and repairs, • Light plumbing and electrical fixture replacement, • Demolition, • Water damage reconstruction, • General carpentry, • Job site preparation and cleanup Our crews work from fully equipped company vehicles and organized trailers with professional-grade Milwaukee tools and equipment. What We're Looking For We're searching for dependable team members who take pride in doing things the right way. You should have experience in several of the following: • Carpentry, • Drywall installation and repair, • Texture matching, • Interior painting, • Trim work, • Door installation, • Flooring repairs, • Basic plumbing, • Basic electrical, • Demolition, • Safe operation of power tools The Right Person Is... • Honest, • Dependable, • Teachable, • Organized, • Positive, • Detail-oriented, • Efficient, • Customer-focused, • Professional in appearance and attitude You should enjoy leaving a home cleaner than you found it. Requirements • Valid driver's license, • Reliable transportation to and from work, • Able to lift 75+ pounds, • Comfortable using power tools, • Pass background check, • Pass drug screening, • Ability to work in residential and commercial environments What Makes Us Different We're building a culture—not just filling positions. Our crews operate with: • Exceptional craftsmanship, • Clean, organized job sites, • Respect for customers and their homes, • Continuous training and skill development, • High-quality tools and equipment, • Teamwork and accountability We believe that speed comes from preparation—not cutting corners. Our Hiring Process This position is not hired based solely on a résumé. Qualified applicants will complete a hands-on skills assessment in our warehouse where you'll demonstrate your abilities by performing real-world repairs such as drywall, texture, painting, trim, carpentry, and general repair work using professional tools and equipment. We hire based on craftsmanship, attitude, work ethic, cleanliness, organization, and problem-solving—not just years of experience. Compensation Competitive hourly pay based on experience and demonstrated skill. Opportunities for advancement into Lead Technician and Foreman positions are available for individuals who consistently demonstrate leadership, professionalism, and exceptional workmanship. If you're proud of your work and want to be part of a team that's raising the standard for construction and property restoration, we'd love to meet you.

Ready to rev up your career? Do you like the thought of spending your workday on the road? Do you have an eye for detail and a commitment to punctuality? If so, consider becoming U-Haul Company's newest Transfer Driver! In this role you will help support the U-Haul community by transporting equipment to and from the repair shop, ensuring that customers can continue to receive the highest quality of care. Whether you are looking for your first job in the industry or have vehicle-repair experience already, U-Haul is the place for you! We have the largest fleet of trucks and trailers in the industry, and we need a first-class team to keep them maintained for our customers. We add to our fleet each year, which ensures that you will always be transporting and working on the latest new equipment. As a U-Haul Transfer Driver, you will use U-Haul Company's proprietary technology to assess and care for field vehicles. U-Haul provides the support and tools you need to succeed and grow, so if you want a job with endless opportunities for career growth, apply today! Our motto is "Hire Fast, Pay Fast." You can start today and get paid today! Schedule a hands-on working interview and get paid for it. We also offer a $100 hiring bonus! Transfer Driver Primary Responsibilities: • Fill in receipt and intake paperwork electronically., • Transport U-Haul equipment between U-Haul centers, dealerships and the repair shop., • Perform visual inspections of equipment., • Maintain a driver log., • Team Members are expected to willingly lend assistance in additional areas as necessary, following the directives and guidance of their supervisor. Transfer Driver Minimum Qualifications: • Valid driver's license, • Able to use mobile transfer programs, • D.O.T. certification if required—can be sponsored by U-Haul Perks of joining the U-Haul Team: Get your career moving with a company who empowers team members to be the healthiest version of themselves! We provide robust wellness benefits, events, and resources to help team members become the happiest and healthiest they can be. We offer a Technician Training program that encompasses both Ford and GMC Training Classes, as well as a tool purchase program. U-Haul offers Transfer Drivers: • Paid holidays, vacation, and sick days, if eligible, • Career stability, • Gym Reimbursement Program, if eligible, • Opportunities for advancement, • Valuable on-the-job training, • Complete Benefit Plan, if eligible, • RRSP payroll deduction plan, • Deferred profit-sharing plan, if eligible, • You Matter Program (EAP), • Mindset App Program, • Wellness Programs, • Discounts on Apple products, Dell computers, hotels, and more Work Environment: The work involves moderate risks or discomforts which require special safety precautions, e.g., working around moving parts, machines, fumes, or chemicals. May be required to use protective clothing or gear such as masks, goggles, gloves, or shields. Physical Demands: The work requires some physical exertion, such as long periods both indoors and outdoors while remaining stationary, traversing spaces, repositioning to reach and use tools, and moving a minimum of 50 lbs. assisted or unassisted. U-Haul is an equal opportunity employer. All applications for employment will be considered without regard to race, color, religion, sex, national origin, physical or mental disability, veteran status, or any other basis protected by applicable federal, provincial, state, or local law. Individual accommodations are available on requests for applicants taking part in all aspects of the selection process. Information obtained during this process will only be shared on a need to know basis.

Job Description The Alignment / Tire & Wheel Technician (tire tech) is responsible for overseeing all activity in the installation shop. The Tire & Wheel Technician ensures that all paperwork related to installs or removals is completed properly, inventory is properly maintained and monitored, and that proper tools and equipment are always in the shop. The Alignment / Tire & Wheel Technician is generally offered as a full time positions and offers benefits plus paid vacation. Prior experience as an automotive technician, auto tech, tire technician, tire tech, wheel specialist, alignment tech is very helpful to the success at this job. Requirements/Responsibilities Alignment / Tire & Wheel Technician (tire tech) Requirements: Must have have at least 3 years experience in: • Front end steering and suspension repair, • Alignment Certified, • Ability to mount, balance, install tires & wheels, • Use of tire machine and balance machine Additionally: • Overseeing all activity in the installation shop, • Place product and supply orders, • Check-in delivered merchandise, • Label merchandise with item numbers, • Organize delivered merchandise according to the customer it was ordered for, • Handle "Return to Vendor" merchandise when necessary, • Identify and properly tag all turned-in products, • Clean and maintain turned-in products, • Maintain an organized system of storing used tires, • Control parts spending Other Requirements: Valid State Driver License with a clean driving history We conduct drug screen, & background check Prior experience as an automotive technician, auto tech, tire technician, tire tech, wheel specialist, alignment tech is important to the success at this job. Special Instructions Please do not send any emails, resumes, or call. We are making it really easy to apply for this position. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description The Tire & Wheel Technician (tire Tech) is responsible for overseeing all activity in the installation shop. The Tire & Wheel Technician should ensure that all paperwork related to installs or removals is completed properly, inventory is properly maintained and monitored, and that proper tools and equipment are always in the shop. Tire & Wheel Technician (tire Tech) is generally offered as a full time positions and offers benefits plus paid vacation. Prior experience as an automotive technician, auto tech, tire technician, tire tech, wheel specialist, alignment tech is very helpful to the success at this job. Requirements/Responsibilities Tire & Wheel Technician (tire tech) Requirements: • Overseeing all activity in the installation shop, • Place product and supply orders, • Check-in delivered merchandise, • Label merchandise with item numbers, • Organize delivered merchandise according to the customer it was ordered for, • Handle "Return to Vendor" merchandise when necessary, • Identify and properly tag all turned-in products, • Clean and maintain turned-in products, • Maintain an organized system of storing used tires, • Control parts spending Other Requirements: Valid State Driver License with a clean driving history We conduct drug screen, & background check Prior experience as an automotive technician, auto tech, tire technician, tire tech, wheel specialist, alignment tech is important to the success at this job. Special Instructions Please do not send any emails, resumes, or call. We are making it really easy to apply for this position. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description Seeking a dynamic Contract IT Field Technician with a strong background in POS repair, IoT, and cutting-edge technology solutions. In this on-site role, you'll be the front-line hero, resolving complex issues and ensuring seamless operation of our clients' technology systems. Your day-to-day will involve hands-on POS system repairs, deploying IoT solutions, and tackling diverse tech challenges. You won’t be alone; our expert remote support team will be there to guide you through troubleshooting and problem-solving, ensuring you have the knowledge and backup to succeed in the field. This position is perfect for those who love variety, enjoy solving real-world tech problems, and thrive in a supportive, team-oriented environment. Responsibilities: · Troubleshoot and repair Point of Sale (POS) systems and pin pads, ensuring timely resolution of hardware and software issues · Implement and maintain IoT solutions, including connecting and configuring IoT devices to enhance operational efficiency and data tracking EV Responsibilities – Training will be provided. · Adhere strictly to Lock-Out Tag-Out (LOTO) procedures during unit head swap-outs and follow upgrade instructions and guidelines for firmware upgrades. · Perform unit head swap-outs on charging stations and conduct firmware upgrades, following detailed step-by-step guides. · Estimate and manage time efficiently, with a target completion time of 2 hours for unit head swap-outs and approximately 15 minutes per station for firmware upgrades. · Provide detailed notes and deliverables before, during, and after each job, ensuring accurate documentation of the process. · Engage with site contacts to locate breakers, chargers, and power cycle units if necessary, ensuring a smooth and efficient process. · Collaborate with the team and communicate effectively to address any challenges that may arise during both unit head swap-outs and firmware upgrades. · Other duties as assigned. Qualifications: · Lock-Out /Tag-Out certification is required; assistance will be provided for obtaining the certification. · Technical background and previous experience in software upgrades or a related technical field are preferred. · Proficient in following step-by-step guides and the ability to follow detailed instructions both verbally and in writing. · Strong attention to detail, commitment to safety protocols, and accuracy in executing tasks. · Effective communication skills, both written and verbal, for interaction with team members and site contacts. · Must have a valid driver's license with reliable transportation to travel to various locations. · Must have a dependable vehicle. · Ability to lift and carry equipment up to 50 pounds. · Willingness to undergo additional training as required. Company DescriptionField Advantage, headquartered in Kingsport, Tennessee, is a premier national IT field services company with over 19 years of proven expertise. We deliver 24-hour on-site technology services across all 50 US states and Canada, specializing in IT deployments, site surveys, and field maintenance. Our tailored solutions serve the retail, entertainment, petroleum, and electric vehicle industries, empowering businesses to thrive in a rapidly evolving technological landscape. With a robust network of over 2,000 technicians, we ensure coverage in every market, providing reliable and efficient support. Field Advantage champions innovation, diversity, and inclusivity, setting benchmarks in the tech industry.Field Advantage, headquartered in Kingsport, Tennessee, is a premier national IT field services company with over 19 years of proven expertise. We deliver 24-hour on-site technology services across all 50 US states and Canada, specializing in IT deployments, site surveys, and field maintenance. Our tailored solutions serve the retail, entertainment, petroleum, and electric vehicle industries, empowering businesses to thrive in a rapidly evolving technological landscape. With a robust network of over 2,000 technicians, we ensure coverage in every market, providing reliable and efficient support. Field Advantage champions innovation, diversity, and inclusivity, setting benchmarks in the tech industry.

Job Description Homeland Safety Systems, is a rapidly expanding and ever-changing company with a core focus in industrial and commercial security consulting, design, engineering, and installation of access control, CCTV, and communication equipment for high end, complex electronic security systems. We currently serve throughout Louisiana, Mississippi, Arkansas, and Texas. We are seeking a skilled Installation Technician with 1 to 2 years of experience to join our team and assist in the installation of electronic control systems for both new and existing customers. This role will also involve providing top-notch service and maintenance on all installed Homeland security solutions, including door access control, CCTV, intrusion detection, and communication systems. We're looking for a candidate with a proven track record of success in this field who can help us deliver unparalleled support to our customers. This position is based out of our Shreveport, Louisiana office. In this role you will... • Efficiently install and service all Homeland security solutions using installation folders and maps., • Perform necessary installations and services, including running electrical wiring in crawl spaces, drilling, trenching, and related tasks., • Connect control panels, install security software, perform wire concealment, and ensure application requirements are met., • Conduct site inspections and review work orders, building plans, and installation manuals to verify materials requirements and proper installation procedures., • Perform routine maintenance of installed equipment, • Identify, troubleshoot, and resolve issues effectively., • Train customers on software and equipment usage and navigation., • Maintain accurate documentation of all work performed and equipment used, following established policies., • Coordinate work efforts with the Operations staff and other technicians while building strong relationships with customers., • Build and maintain positive rapport with customers., • Complete Daily Project Reports., • Keep informed of new products and developments, • Perform a variety of marginal duties not listed, to be determined and assigned as needed., • Manage a technician crew and job site when required., • Maintain client privacy and confidentiality. You have what it takes if you have... • The ability to travel up to 60% for the role., • Prior experience in low voltage and access control preferred but not required., • Clean background check., • Ability to pass a state and federal background check to obtain industry licenses and security clearance, • Must pass pre-employment and random drug screens (Required by State Law), • Flexible schedule. Must be available for nights/weekend work, as well as out of town – overnight travel, as needed, • Current driver's license and clean driving record (MVR), • Possess or be able to obtain proper state licensing once hired, • A working knowledge and understanding of electronics, • Strong organizational skills that reflect ability to perform and prioritize multiple tasks with attention to detail, • Possess a dedication to working in a fast-paced environment, • Possess excellent time management, planning, and forward-thinking skills, • Possess excellent telephone etiquette, communication, and listening skills, • Possess the ability to self-motivate and work with little supervision, • Operate hand tools and equipment necessary to perform all associated tasks, • Demonstrate proficiency in reading and understanding electrical schematics, site maps and drawings, and related documents associated with the installation and service of security systems, • Present a professional image both in personal and vehicle appearance, • Maintain a professional demeanor with customers and employees, • Must be able to climb ladders and work on lifts as needed, • Must be able to lift at least 50 pounds, • Experience in one or more of the following Trades is preferred:, • Ability to troubleshoot and repair other electronic components, including board level work, relays, networking equipment, computer hardware, and other CCTV equipment (both network and analog), • Security Installation (possessing a LSFMA Security Endorsement), • Fire Alarm or other Life Safety field, • Electrician Apprentice (90v +), • Network Administration (Certification not required, but training for CCNA, MCSE, etc.), • Other relevant electronics fields – experience in access control and camera installation preferred.

Job Description Bristol Infrastructure Design Services, LLC is seeking a Construction Surveillance Engineering Technician (CSET) to support NAVFAC SE at Barksdale AFB, LA. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client’s Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: • Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.), • Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities., • Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC’s representative at the following meetings, conferences, and briefings., • Develop Quality Assurance Plans., • Prepare Construction Representatives Reports (CCRs), • The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions., • The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs., • Maintain Working Files. NAVFAC’s Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills • Specialized training for Construction Quality Verification or completed an equivalent course., • Competent computer skills for network data entry., • Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional., • Ability to communicate in English effectively orally and in writing., • Experience in maintaining official construction site records., • Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel., • In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods, • In depth experience interpreting construction drawings and specifications on construction projects., • Experience in making materials take-offs for construction work., • Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector’s area of expertise., • Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements., • Completed the 30 Hour OSHA Construction Training within the past 2 years., • Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding., • U.S. Citizen., • A valid driver’s license. Benefits • Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health plan including medical, dental, vision, life, short-term disability insurance, and 401(k) plan with employer match. Equal Opportunity Employer Statement • Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment., • Bristol grants employment preference first to BBNC and Choggiung shareholders, their spouses, or descendants, and second to Alaska Native Corporation shareholders in accordance with P.L. 93-638. Disclaimer • This job description is not intended to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice., • This job description is not a contract or employment. It does not promise or guarantee any particular benefit or specific action. All employment with Bristol is “at-will” which means that Bristol or employee can terminate the employment relationship at any time with or without cause.

Job Description Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team Mavis TODAY at our state-of-the-art automotive service and retail tire sales centers in the Shreveport, LA area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800! WHAT IS THIS GREAT CAREER OPPORTUNITY? As an Automotive Tire Technician, you're the backbone of our business. That's why you'll realize the rewards of a career with competitive, guaranteed base compensation PLUS additional earning potential through significant weekly bonus payments. The starting base rate of pay for an Automotive Tire Technician is negotiable. • NO EXPERIENCE IS NEEDED! We'll teach you everything you need to know through PAID TRAINING. To help introduce you to our weekly performance-based incentive programs and to give us an opportunity to coach you on our industry-leading processes, Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800!, • Automotive Tire Technicians install new tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely., • While providing best-in-class automotive service, you'll get weekly bonus payments tied to every single service you perform on top of your guaranteed hourly rate. Take the first step on an exciting career path by becoming an Automotive Tire Technician with Mavis! HOW DO I KNOW IF A CAREER WITH MAVIS IS RIGHT FOR ME? You'd be a great fit for the Automotive Tire Technician position if you: • like paid training and using proven processes;, • are motivated by commissions/incentive compensation;, • value reliability, punctuality and teamwork;, • love working in a fast-paced environment;, • enjoy staying active;, • are open to learning;, • care about meeting customer-promised delivery times and providing quality service;, • want to work for a growing company that promotes from within; and,, • love working in a safe, state-of-the-art environment. To be eligible for the Automotive Tire Technician position you must: • be at least 18 years of age;, • be legally authorized to work in the United States; and,, • be able to work 5 days each week. WHY WILL I LOVE WORKING WITH MAVIS? At Mavis, we understand that our people are our greatest asset. We value our team members' hard work and that's why proudly offer you benefits and rewards to support your lifestyle and well-being. As an Automotive Tire Technician, you can expect: • A safe, positive working environment;, • An excellent combination of fringe benefits, like health, vision and dental insurance;, • A 401(k) retirement savings plan with employer match;, • Paid vacations;, • Paid time off;, • Paid holidays;, • Life insurance;, • Paid on-the-job training; and,, • Opportunities for career growth and advancement What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro Company DescriptionMavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job DescriptionJob Title: RME Senior Mechanical & Robotics Maintenance Technician (Temporary)Job Description This role serves as a Maintenance Technician III, leading a team of service technicians in the installation, maintenance, and repair of automated packaging and distribution equipment. You design practical solutions for complex technical problems, support the operations maintenance team, and contribute to the reliability and performance of advanced automation and robotics systems. Responsibilities • Lead service technicians in the installation, troubleshooting, and repair of automated packaging and distribution equipment., • Support the operations maintenance team by designing and implementing solutions for difficult mechanical, electrical, and robotics-related problems., • Perform preventive maintenance on automation, robotics, electrical, hydraulic, and mechanical systems to minimize downtime and extend equipment life., • Install, maintain, and repair electrical systems, including wiring and conduit, in accordance with technical drawings and safety standards., • Read and interpret electrical schematics and mechanical blueprints to diagnose issues and guide installation and repair work., • Install and fabricate components and assemblies required for automation and robotics equipment., • Perform mechanical maintenance and repair on conveyors, robotics, and related material-handling systems., • Work with robotics systems, including tasks related to robotics maintenance and basic programming on platforms such as FANUC and ABB., • Order parts and materials needed for maintenance and repair tasks, ensuring accuracy and timely availability., • Collaborate with team members to improve maintenance processes and enhance equipment reliability within the warehouse environment.Essential Skills, • Hands-on experience as a maintenance technician working with automated packaging and distribution equipment., • Proficiency in electrical system maintenance and repair, including wiring and conduit installation., • Ability to read and interpret electrical schematics and mechanical blueprints., • Strong mechanical maintenance and repair skills, including work with hydraulics and automation equipment., • Experience performing preventive maintenance on industrial or warehouse automation systems., • Robotics maintenance experience, including exposure to robotics platforms such as FANUC and ABB., • Ability to support and lead other technicians in troubleshooting and resolving complex technical issues., • Demonstrated capability in installations and fabrication related to mechanical and electrical systems., • Competence in ordering parts and managing required components for maintenance and repair activities.Additional Skills & Qualifications, • Experience as a Robotics Technician or in a similar automation-focused maintenance role., • Familiarity with robotics programming concepts, particularly with FANUC and ABB systems., • Background in warehouse or distribution center environments with automated material-handling equipment., • Comfort working with both mechanical and electrical aspects of advanced automation systems.Why Work Here? You will work directly with advanced automation and robotics systems, gaining valuable hands-on experience with cutting-edge technology. This temporary role offers a clear pathway to transition into a full-time opportunity, with access to comprehensive benefits and stock programs upon conversion. You join a culture that values technical growth, continuous learning, and collaboration within high-performing maintenance and operations teams. Work Environment You work in a warehouse environment focused on automated packaging and distribution operations. The setting centers around industrial automation, robotics, and material-handling systems, where you regularly interact with electrical panels, conveyors, robotics cells, and related equipment. The role involves being on the floor around active machinery, requiring adherence to safety procedures and use of appropriate protective equipment. Work hours and shifts align with warehouse operations and may involve varied schedules to support uptime and maintenance needs. Job Type & Location This is a Contract to Hire position based out of Shreveport, LA. Pay and Benefits The pay range for this position is $42.65 - $42.65/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Shreveport,LA. Application Deadline This position is anticipated to close on Jul 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSynergen believes that connective, turnkey services and collaborative relationships create more innovative solutions and greater project outcomes. We develop, build, and grow services specifically designed to work together to enhance capabilities and amplify results. Were curious and determined problem-solvers, built on grit and an unwavering determination to get it done. Synergen provides an array of custom support services for the oil & gas industry and beyond, backed by decades of experience and relationship-focused service. Our offerings can carry customer projects from start to finish, while providing the reliability and support they need at every stage in between. We are actively seeking a Water Transfer Technician at Hydroline, a Synergen company, for the Haynesville District that would be responsible for assisting with rig up and rig down projects as a CMV driver and rig up or rig down task. They will be responsible for understanding and adhering to company standards and expectations. Quality & Safety will be a focal point in all matters. Essential Functions of the position are described below: • Clamp lay flat, suction hose, discharge hoses, and assisting operators, • Perform traffic control when necessary, • Monitoring tank levels, operate pumps, • Constantly communicate with supervision on issues, changes, and specific needs for executing assigned tasks, • Ensure compliance of company policies and standards are always followed, ie: JSAs, equipment inspections, checklist, etc., • Ensure facility and work is executed to the highest standard while meeting the customers expectations and is done safely and compliantlyA qualified applicant must posses the following knowledge, skills, and abilities:, • Entry level, • Mechanical troubleshooting skills, • Current safety certifications to include PEC, H2S, Forklift, First Aid/CPR preferred, • Excellent and clear communication to safely and efficiently complete job tasks with team members, • Lead by example, teach, motivate, and mentor team members, and execute daily goals, • Drive a culture where our equipment and work is organized, clean, and presentablePhysical Demands and Work Environment While performing the duties of this position, the employee frequently is required to use hands or fingers; handle or feel objects, tools, or controls. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Also includes consistently working outdoors in elements/weather. Work schedule varies according to demands of job assignments. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Benefits Offered • 401(k) with company match, • Health insurance, • Dental insurance, • Vision insurance, • Accident insurance, • Basic Life insurance, • Supplemental Life insurance, • Short Term Disability, • Paid Holidays, • Paid Time Off At Synergen, people come first. That means our crew members, our customers, and the members of the communities we serve in. Thats why, for us, safety isnt a little thing its everything. We take proactive measures to uphold the most stringent operating and safety standards on every single job site. We do it safe or not at all. Period. Synergen is more than a workplace; its where GRIT comes alive. Our people are sharp, hardworking, and eager to work as a team. Without them, we couldnt go above and beyond in the energy industry. When you work for Synergen, Synergen works for and with you to help you grow your career and achieve your goals. Our company participates in E-Verify to confirm the identity and employment eligibility of all new hires.

Job DescriptionSynergen believes that connective, turnkey services and collaborative relationships create more innovative solutions and greater project outcomes. We develop, build, and grow services specifically designed to work together to enhance capabilities and amplify results. Were curious and determined problem-solvers, built on grit and an unwavering determination to get it done. Synergen provides an array of custom support services for the oil & gas industry and beyond, backed by decades of experience and relationship-focused service. Our offerings can carry customer projects from start to finish, while providing the reliability and support they need at every stage in between. We are actively seeking a Facility Support Technician at Hydroline, a Synergen company, in Bossier City, Louisiana that would be responsible for maintaining a clean and organized facility. They will oversee all deliveries received and ensure the placement of items. They will be responsible for understanding and adhering to company standards and expectations. Quality & Safety will be a focal point in all matters. Job duties include, but are not limited to: • Operate equipment, ie: forklift, CTL, tracked carrier, etc., • Assist with loading and unloading supplies and equipment, • Maintain inventory of ancillary items in predetermined space, • Perform minor repair and maintenance tasks assigned by supervision, • Understand and assist with loading and unloading trucks and trailers coming and going from the facility, • Understand and perform periodic CMV audits and Quarterly Vehicle Inspections, • Constantly communicate with supervision on issues, changes, and specific needs for executing assigned tasks, • Ensure compliance of company policies and standards are always followed, ie: JSAs, equipment inspections, checklist, etc., • Ensure facility and work is executed to the highest standard and is done safely and compliantly A qualified applicant must posses the following knowledge, skills, and abilities: • High School Diploma or equivalent, • Knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Excellent and clear communication to safely and efficiently complete job tasks with team members, • Lead by example, teach, motivate, and mentor team members, and execute daily goals, • Drive a culture where equipment and work is organized, clean, and presentable Physical Demands and Work Environment While performing the duties of this position, the employee frequently is required to use hands or fingers; handle or feel objects, tools, or controls. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Also includes consistently working outdoors in elements/weather. Work schedule varies according to demands of job assignments. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Benefits Offered • 401(k) with company match, • Health insurance, • Dental insurance, • Vision insurance, • Accident insurance, • Basic Life insurance, • Supplemental Life insurance, • Short Term Disability, • Paid Holidays, • Paid Time Off At Synergen, people come first. That means our crew members, our customers, and the members of the communities we serve in. Thats why, for us, safety isnt a little thing its everything. We take proactive measures to uphold the most stringent operating and safety standards on every single job site. We do it safe or not at all. Period. Synergen is more than a workplace; its where GRIT comes alive. Our people are sharp, hardworking, and eager to work as a team. Without them, we couldnt go above and beyond in the energy industry. When you work for Synergen, Synergen works for and with you to help you grow your career and achieve your goals. Our company participates in E-Verify to confirm the identity and employment eligibility of all new hires.

Job Description Compensation $17.50 Hourly Job Description Text JOBS to 811DIG (811344) to connect with our hiring team today! Are you an outdoor enthusiast who enjoys independent field work and is looking to jump start your career? If you are a quality-conscious, safety focused, hard-working individual, then consider an exciting long-term career at USIC! The USIC name and brand are highly recognized and respected for our strong commitment to quality and safety. We are America's leader in underground utility damage prevention and advanced infrastructure services, performing more than 84 million locates each year for the more than 1,400 telecommunications, electric, gas, water, and sewer utilities and municipalities we serve nationwide. Our mission is to deliver quality, efficient, safe, and innovative solutions to protect our partners' infrastructure and critical assets. At USIC, we are committed to Leading from the Ground Up. We are looking for individuals who consider themselves problem solvers, take pride in public safety, and thrive in a fast-paced, exciting work environment. Our communities are your communities. If you're looking for growth, we've got you covered. We provide a quality training program and opportunities for advancement. No prior locating experience is needed, but experienced locators are encouraged to apply! Our technicians spend their workdays on the go, independently working in the field using their company-provided vehicle. We use best-in-class ticket and claims management systems to ensure clear and complete mark-out services for the excavator or property owner at the work site. Your Responsibilities as a Locator: Correctly, safely, and efficiently locate underground utilities, including telecommunications, electric power, cable TV, gas, water, and sewer systems. Thoroughly search for underground utilities in a designated area, accurately marking the location, completing the necessary documentation, and photographing each locate. These are daytime, full-time positions. We have a 48-hour turnaround time on many locates, which means we generally work the day after holidays and some weekends, as needed. Must be able to work overtime, weekend shifts, and on-call shifts (including nights and weekends), dependent upon the needs of the business. Why You'll Love Working for Us (Our Benefits): 100% paid training - We're invested in you, starting on your first day. High-quality company vehicle & fuel card - All work-related expenses are paid. This means you won't be putting mileage on your personal vehicle for work. Company phone & equipment - Advanced technology you can count on. DailyPay - Access your pay when you need it. Comprehensive insurance options - A variety of excellent insurance choices including medical, dental, vision, and life. 401(k) with company match - We'll help you save for the long term with our competitive 401(k) employer match program. PTO & paid holidays - Even in your first year, so you can spend time with your loved ones. Weekend & holiday on-call pay - Earn extra money while on call over the weekend or on a company holiday, even if not called out to an emergency. Technician Incentive Plan - Bonuses based on individual quality and safety results. Career Path Program (CPP) - Unmatched in our industry. We recognize employees who strive to be the best in their roles with distinctive titles, promotions, and more. USIC All Stars - Our employee recognition program. Earn points for living our company values and celebrating milestones. Redeem your points for gift cards or merchandise! Tenure Boots Program -$200 voucher to buy a new pair of work boots on your first anniversary and every year after. Education Partnership & Scholarship Program - Discounted tuition for USIC employees, their spouses, and dependents through Indiana Tech (courses available online nationwide). Scholarships available for employees. Credit hours for completing our utility locator training curriculum and/or for military service. Employee discounts & perks - Outstanding discounts at major retailers and service providers. What We Need from You (Our Requirements): Able and willing to work outdoors in various weather conditions. Previous outdoor experience is a plus. Proficiency with technology Available to work overtime, weekends, and on-call shifts as needed. Able to pass a drug screen (this is a safety-sensitive position). Valid driver's license and a safe driving record Able to work in a confined space; walk, bend, and lift up to 75 lbs. Able to distinguish between colors used to identify wiring and mark underground utilities. Able to read, understand, and reference locate tickets, as well as maps and prints. Able to communicate clearly with colleagues, customers, contractors, and homeowners. We are an Equal Opportunity Employer. Veterans are encouraged to apply. When texting, message and data rates may apply. View our terms and conditions here: https://www.usicllc.com/terms-and-conditions and our privacy policy here: https://usicllc.com/privacy-policy.

Job Description Maintenance Tech Position Summary We’re excited to welcome a skilled and motivated Maintenance Technician to our team! In this role, you’ll help preserve and enhance the overall quality of our property by performing routine and preventive maintenance. You’ll deliver outstanding service to current and prospective residents by completing home and building repairs with care and efficiency, while also maintaining the community’s grounds, streets, facilities, and equipment. This is a great opportunity to make a visible impact every day while supporting company goals and proudly representing our core values. Duties and Responsibilities What you will do: The qualified individual will work as an integral part of the Operations and Community teams to perform the following essential job functions: • Routine maintenance of rental homes completed by assigned work orders generated from resident requests for service., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, performing general cleaning, painting, picking up trash, mowing, trimming., • Cleans (buffing, dusting, sweeping, mopping, washing windows, tidying, etc.) community common areas and workspaces including clubhouse, community office, restrooms, laundry room and maintenance garage., • Supports cost-cutting and expense control programs by fixing rather than replacing parts, when possible, not being wasteful with materials and supplies, and practicing the correct use of tools and equipment., • Paints interior and exterior walls and trim., • Operates backhoe to dig trenches for water and sewer pipe (if applicable)., • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Provide seasonal snow removal services including removing snow from community streets, parking lots, building entrances and other areas as needed (if applicable)., • Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Provide general upkeep of vacant sites including strap-downs., • Inspect common area amenities including pool/spa, laundry, playground, and other recreational equipment to ensure proper operation and make repairs as needed., • Maintains community pool(s), tests chemical levels, and adjusts appropriately (if applicable)., • Complete checklist of duties and repairs to community and vacant sites., • Assist Community Manager with supervising onsite contracted work., • Perform duties relating to well-water system, sewer system or water meters including water testing and reading, repairing, and installing water meters., • Follow safety regulations and procedures including safely operating vehicles and machinery., • Position may require flexible hours, nights, and weekends as needed., • Position requires working one scheduled evening per week and one scheduled Saturday per month, and other non-business hours as customer traffic dictates., • Position may require temporary or permanent reassignment of work location as directed by Regional Manager or Senior Vice President., • Other duties as assigned. Qualifications What you should have: • High school diploma or general education degree (GED), or comparable experience and/or training., • Broad experience and knowledge of general maintenance techniques and repair work., • Proficient in operating equipment including hand tools, power tools and commercial machinery., • Ability to snowplow using company truck/plow according to snowfall standards., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Ability to create legible written reporting and note taking., • Able to work in a team environment and take direction., • Availability to work on call as needed during non-business hours., • Must maintain a valid driver license and clean driving record., • Must have reliable transportation to the community(ies)., • Must maintain an active and working personal mobile phone., • Computer skills required: Proficient use of email and internet, and familiarity with smartphone or tablet., • A growth mindset; always testing and learning., • Willingness and ability to present self in a neat, clean, and professional manner always throughout the workday and/or whenever present at the community. Compensation What we have to offer: We know that happy people are productive and perform. If we take good care of our team, everything else will fall in place. Supervisory Responsibilities • This job has no supervisory responsibilities. Physical Demands and Work Environment • Continually required to stand, walk, or sit., • Frequently required to utilize hand and finger dexterity., • Continually required to climb, balance, bend, stoop, kneel or crawl., • Frequently work near moving mechanical parts., • Occasionally work in high, precarious places., • Occasionally work around fumes, airborne particles, or toxic chemicals., • Continually exposure to outside weather conditions., • While performing the duties of this job, the noise level in the work environment is usually moderate to very loud., • The employee must occasionally lift and /or move more than 100 pounds / frequently lift and/or move up to 50 pounds / continually lift and/or move up to 20 pounds., • Specialized equipment, machines, or vehicles used: Lawncare equipment, snow-plow, other equipment as needed. Equal Opportunity Employer At BLC Communities, we don’t just accept difference – we celebrate it! We are committed to creating an inclusive environment for all employees and seek to support the diverse cultures, perspectives, skills, and experiences of our staff. BLC Communities is an equal opportunity employer where hiring is based solely on a person's merit and qualifications directly related to professional competence. BLC Communities does not discriminate against any applicant or employee based on their race, creed, color, religion, gender, gender identity/expression, sexual orientation, national origin, disability, age, genetic information, veteran status, marital status, medical condition, or any other non-merit factor protected by law. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job Title: Information Technology Professional (IT/CTN/IS) Category / Component: Enlisted • Both Overview Information Systems Technicians, Cryptologic Technician Networks, and Intelligence Specialists keep the Fleet connected, informed, and secure by operating and defending networks, conducting cyber operations, and producing intelligence for decision makers across the Navy. Key Responsibilities As an Information Systems Technician, design, operate, secure, and restore networks, servers, and communication systems that support naval operations; as a Cryptologic Technician Networks specialist, conduct offensive and defensive cyber operations, investigate and track adversary activity, and help protect Navy networks and critical systems; as an Intelligence Specialist, collect and analyze information on adversaries, environments, and weather and create intelligence products and briefings for commanders. What to Expect High tempo, mission critical work supporting around the clock operations and watch floors; mix of help desk and user support, network and systems administration, incident response, and planned maintenance; continuous learning in cyber tools, network defense, signals analysis, and intelligence production; strict requirements for handling classified information and complying with security and information assurance standards; shift work, duty rotations, and deployments afloat and ashore. Work Environment Worldwide assignments ashore at information warfare and intelligence commands and afloat on ships, aircraft, or submarines; work in secure facilities, server rooms, operations centers, and shipboard communications spaces; close teamwork within information warfare and intelligence teams and with supported operational units. Pathways, Training & Advancement Recruit Training followed by Class A School in an information warfare specialty, such as IT or CTN at information warfare training sites and IS at intelligence training commands; advanced C schools and follow on training in areas such as cyber operations, network defense, digital forensics, signals analysis, targeting, imagery, language, and mission systems; progressive advancement based on qualifications, performance, and warfare pins such as Information Warfare and platform specific warfare designations. Direct enlistment into IT, CTN, or IS pipelines from civilian life based on aptitude, security clearance eligibility, and Navy needs; in service conversion opportunities for qualified Sailors who meet screening criteria and community requirements; Reserve accession pathways for prior service or qualified civilian professionals when manning needs allow. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by law and policy, with most billets requiring citizenship; high school diploma or equivalent; at least 17 years of age; strong interest and aptitude in computers, networks, cyber operations, and analytical work; eligibility for a security clearance at the Secret or Top Secret level depending on the billet. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Advanced Electronics / Computer Field (ET/FC) Category / Component : Enlisted Active Overview The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navys most sophisticated electronics and computing systems, including radar, communications, navigation, local area networks, weapons fire control, and Aegis combat systems. ETs and FCs form the backbone of a ships Combat Systems department aboard carriers, cruisers, destroyers, and other surface combatants, as well as at repair and technical activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on performance and Navy needs; as an ET, maintain and repair radar, communication, and navigation equipment including transmitters, receivers, displays, and shipboard communications suites such as SATCOM and HF; as an FC, operate, maintain, and repair fire control radars, computers, large screen displays, local area networks, weapon control consoles, and automatic gun systems; troubleshoot complex electronic and electro mechanical faults using technical documentation, test equipment, and established procedures; maintain configuration control, documentation, and logs that support inspections, certifications, and combat system readiness. What to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Work Environment Assignments aboard surface combatants such as aircraft carriers, Aegis cruisers and destroyers, and amphibious ships, as well as at shore based repair and technical facilities; daily work in combat systems spaces, radar rooms, communications centers, electronics shops, and shipboard network spaces; a mix of lab style environments and shipboard spaces with noise, ladders, confined areas, and occasional exposure to heat or weather when working on topside equipment. Pathways, Training & Advancement Recruit Training followed by Apprentice Technical Training at Great Lakes, Illinois, covering basic electronics, circuitry, safety, digital theory, microcomputers, fiber optics, test equipment, and troubleshooting; strand training in either the Fire Controlman or Electronics Technician track, with FCs focusing on radar, ballistics, and fire control basics, and ETs focusing on communications suites and radar systems; follow on A School and platform or system specific C Schools, often with college credit recommended by the American Council on Education; accelerated advancement to E4 upon completion of initial school training and all advancement requirements, with continued promotion based on performance, time in rate, and professional development. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelors or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Normal hearing and color perception to work safely with electronic displays and color coded wiring and schematics; strong arithmetic and computing aptitude, with the ability to learn digital theory and complex technical systems; physical strength and manual dexterity to handle equipment, tools, ladders, and shipboard environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailors status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

We've made a lot of progress since opening the doors in 1942, but one thing has never changed - our commitment to serve, heal, lead, educate, and innovate. We believe that every award earned, every record broken and every patient helped is because of the dedicated employees who fill our hallways. At Ochsner, whether you work with patients every day or support those who do, you are making a difference and that matters. Come make a difference at Ochsner Health and discover your future today! This job works as a consulting team member on client or internal assignments. Handles escalated coding related projects, new services, regulatory updates and overall coding quality. Provides coding education to various groups such as coders, billers, nurses, physicians, etc. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential duties. This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at the company's discretion. Required High school diploma or equivalent. Preferred Bachelor's degree in information technology (IT), computer science, health information management (HIM) or related field. Required 5 years of experience working in a hospital or ambulatory surgery center (ASC) as a coder required including experience in consulting and in client facing positions. Required Certification as Registered Health Information Administrator, Registered Health Information Technician, Certified Coding Specialist, Certified Coding Specialist-Physician based, Certified Professional Coder, Licensed Practical Nurse, OR Registered Nurse. • Proficiency in using computers, software, and web-based applications including Microsoft Office Applications such as Word, Excel, PowerPoint, Outlook, Project, and Visio., • Effective verbal and written communication skills and ability to present information clearly and professionally., • Strong interpersonal skills., • Advanced knowledge of coding/documentation and billing regulations., • Strong analytical skills and ability to gather and interpret data, evaluate reports and track progress., • Ability to travel throughout and between facilities., • Participates in hospital revenue cycle assessments and process improvement engagements., • Prepares appropriate written reports to include findings and recommendations., • Conducts periodic status checks with the clients and project team to assess progress against plan and communicates progress to supervisors., • Oversees and provides training and mentoring to help team members increase their effectiveness., • Adapts behavior to the specific patient population, including but not limited to respect for privacy, method of introduction to the patient, adapting explanation of services or procedures to be performed, requesting permissions and communication style., • Performs other related duties as required. The above statements describe the general nature and level of work only. They are not an exhaustive list of all required responsibilities, duties, and skills. Other duties may be added, or this description amended at any time. Remains knowledgeable on current federal, state and local laws, accreditation standards or regulatory agency requirements that apply to the assigned area of responsibility and ensures compliance with all such laws, regulations and standards. This employer maintains and complies with its Compliance & Privacy Program and Standards of Conduct, including the immediate reporting of any known or suspected unethical or questionable behaviors or conduct; patient/employee safety, patient privacy, and/or other compliance-related concerns. The employer is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. Physical and Environmental Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Light Work - Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly (Constantly: activity or condition exists 2/3 or more of the time) to move objects. Physical demand requirements are in excess of those for Sedentary Work. Even though the weight lifted may be only a negligible amount, a job should be rated Light Work: (1) when it requires walking or standing to a significant degree; or (2) when it requires sitting most of the time but entails pushing and/or pulling of arm or leg controls; and/or (3) when the job requires working at a production rate pace entailing the constant pushing and/or pulling of materials even though the weight of those materials is negligible. NOTE: The constant stress and strain of maintaining a production rate pace, especially in an industrial setting, can be and is physically demanding of a worker even though the amount of force exerted is negligible. Normal routine involves no exposure to blood, body fluid or tissue and as part of their employment, incumbents are not called upon to perform or assist in emergency care or first aid. The incumbent has no occupational risk for exposure to communicable diseases. Because the incumbent works within a healthcare setting, there may be occupational risk for exposure to hazardous medications or hazardous waste within the environment through receipt, transport, storage, preparation, dispensing, administration, cleaning and/or disposal of contaminated waste. The risk level of exposure may increase depending on the essential job duties of the role.

This job assumes responsibility for maintaining high patient care standards in all aspects of a hospital and/or clinic setting. Coordinates and supervises the schedules and activities of the Therapists and EKG Technicians. Regularly attends meetings and communicates with physicians and supporting clinicians. Actively participates in chart audits and continuous quality improvement, as well as assists with routine maintenance on equipment in assigned department. Required - Must either be a graduate of an Accredited Respiratory Care Program or grandfathered in by the state of practice Required - 2 years' experience as technician or therapist in general adult care to adequately and effectively counsel subordinates. (Neonatal and pediatric experience may be required per certain facilities.) Required - Current License as a Respiratory Therapist in the state of practice Certification by the National Board of Respiratory Care as a Certified Respiratory Therapist or Registered Respiratory Therapist Basic Life Support (BLS) Certification from the American Heart Association Advanced Cardiovascular Life Support (ACLS) from the American Heart Association Preferred - Pediatric Advanced Life Support (PALS) from the American Heart Association • Must have computer skills and dexterity required for data entry and retrieval of patient information., • Must be proficient with Windows-style applications and keyboard., • Excellent verbal and written communication skills to effectively present information clearly and professionally to varying levels of individuals throughout the patient care process., • Serves as a resource person to the Respiratory Care staff., • Supervises staff through effective human resource management., • Serves as resource to Medical Staff., • Serves as the chart auditor for all quality review in department., • Ensures appropriate administration of and security of medications used in Respiratory Care., • Ensures maintenance of Blood Gas Analyzers and equipment., • Provides care based on physical psycho/social educational, safety and related criteria appropriate to the age of patients in assigned area., • Adapts behavior to the specific patient population, including but not limited to: respect for privacy, method of introduction to the patient, adapting explanation of services or procedures to be performed, requesting permissions and communication style., • Other related duties as required. The above statements describe the general nature and level of work only. They are not an exhaustive list of all required responsibilities, duties, and skills. Other duties may be added, or this description amended at any time. Remains knowledgeable on current federal, state and local laws, accreditation standards or regulatory agency requirements that apply to the assigned area of responsibility and ensures compliance with all such laws, regulations and standards. This employer maintains and complies with its Compliance & Privacy Program and Standards of Conduct, including the immediate reporting of any known or suspected unethical or questionable behaviors or conduct; patient/employee safety, patient privacy, and/or other compliance-related concerns. The employer is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. Physical and Environmental Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Very Heavy Work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move objects. Physical Demand requirements are in excess of those for Heavy Work. (Constantly: activity or condition exists 2/3 or more of the time) to move objects. Physical demand requirements are in excess of those for Sedentary Work. Even though the weight lifted may be only a negligible amount, a job should be rated Light Work: (1) when it requires walking or standing to a significant degree; or (2) when it requires sitting most of the time but entails pushing and/or pulling of arm or leg controls; and/or (3) when the job requires working at a production rate pace entailing the constant pushing and/or pulling of materials even though the weight of those materials is negligible. NOTE: The constant stress and strain of maintaining a production rate pace, especially in an industrial setting, can be and is physically demanding of a worker even though the amount of force exerted is negligible. Duties performed routinely require exposure to blood, body fluid and tissue. The incumbent works in a patient care area; works in an area where patients enter; works directly with patients; and/or works with specimens that could contain communicable diseases. There may be an occupational risk for exposure to communicable diseases. Because the incumbent works within a healthcare setting, there may be occupational risk for exposure to hazardous medications or hazardous waste within the environment through receipt, transport, storage, preparation, dispensing, administration, cleaning and/or disposal of contaminated waste. The risk level of exposure may increase depending on the essential job duties of the role.

DOD SkillBridge Medical Equipment Technician Internship Thank you for your service in the military! Join Agiliti and make a difference in your new career as a Medical Equipment Technician or Biomedical Equipment Technician. Our internships are for all technician levels! Agiliti is a nationwide company of passionate medical equipment management experts who believe every interaction has the power to change a life. Our industry-leading commitment to quality and team of expert technicians helps ensure clinicians have access to patient-ready equipment needed for patient care. Make an impact in healthcare and grow your career with Team Agiliti! DOD SkillBridge Technician Program Agiliti has created a 4-6 month SkillBridge program for transitioning service members to meet our specific workforce needs. We have successfully matched those needs to the skills and abilities of highly motivated service members. The Medical Equipment Technician works under the guidance of a qualified Biomedical Equipment Technician or supervisor. Key Skills Electronics General maintenance Mechanical maintenance Training Plan Participate in an individualized training plan that meets the soldiers needs and the work at the Agiliti location Training is conducted via a mixture of CBT (computer-based training), OJT (on the job) and classroom learning Interns will receive extensive opportunity for hands on experience and will participate in Agiliti's competency verification program Interns will be assigned a mentor at their location Benefits of our SkillBridge program TRAINING: Both internal Agiliti and potential for formal Original Equipment Manufacturer Wide range of positions and career paths available Nationwide: Over 90 locations for relocation Hands-on experience in the medical field Highly sought-after skills Meaningful work: Support hospitals including many DOD facilities 25% of open positions are filled with internal talent through promotions What Will You Do in This Role Provide cost-effective equipment inspection, maintenance, calibration, and repair service on a variety of medical devices Complete all paperwork and computer data entry accurately and promptly to ensure complete documentation for billing and required regulatory compliance. Communicate with clinical staff on the topics of equipment features, functionality, etc. What You Will Need for This Role High school diploma or equivalent required. Must hold a current, valid, and unrestricted driver's license. Must have a safe driving record based on Agiliti policies. Basic computer skills; understanding of computer networks and equipment interfacing. Willing to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as required to support a 24/7 schedule. Willing to travel periodically to support business needs. Able to lift and/or push up to 75 pounds. Able to stand and walk for extended periods of time. Able to frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, and stand for long periods of time. Permanent employees also enjoy Tuition assistance 401k Health benefits * Continued technical training It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination. Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs. Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact recruiting@agilitihealth.com. Primary Job Location: Chicago District Additional Locations (if applicable): Albuquerque District, Albuquerque District, Atlanta District/COE, Atlanta Service Center, Baltimore District, Birmingham District, Boston District, Burbank District, Charlotte District, Cincinnati District, Cleveland District, Columbus District, Dallas District, Denver District, Detroit District, El Paso District, Fargo District, Ft. Lauderdale FL Branch (inactive), Fullerton District/COE, Green Bay District, Harrisburg District, Houston District, Indianapolis District, Iowa City District, Jacksonville District {+ 30 more} Job Title: Medical Equipment Technician I Company: Agiliti Location City: Downers Grove Location State: Illinois Pay Range for All Locations Listed: $15.15 - $38.43 This range represents the low and high ends of the Agiliti pay range for this position. This base pay range information is based on the market locations shown. The actual pay offered may vary depending on several factors including geographic location, experience, job-related knowledge, skills, and related factors. Dependent on the position offered, short-term and/or long-term incentives may be provided as part of the compensation. Applicants should apply via Agiliti's internal or external career site.

Alpine Silica, a PF Holdings company based in Willow Park, TX, operates advanced facilities in key U.S. oil and gas regions like Haynesville, Eagle Ford, and Permian Basins. It produces frac sand and provides in-basin solutions to enhance efficiency for top oil and gas producers. • Follows and role models site safety, quality SOPs, and site standards., • Operates instrument, electrical tools, and equipment as required to troubleshoot, fabricate, replace and/or repair industrial parts and equipment per demonstrated skill level competency. This includes VOM, DLRO, megger, hi-pot, simulators, and AMS software as required to maintain reliability and cost goals., • Improves equipment and system reliability and cost effectiveness through demonstrated equipment, component, and system ownership. IE- safety lead, quality lead, equipment standardization..., • Functions as the owner of a technology and/or equipment subject matter expert through the personal development of in-depth technical skills to support PM and troubleshooting of complex issues. Includes disaster recovery planning, spare parts inventory and obsolescence planning of parts and components., • Operates mobile equipment as required., • Qualified electrical low voltage troubleshooting, • Troubleshoots instrument/s, electrical and mechanical problems, and performs root cause analysis in partnership with operations and engineering to solve routine and non-routine problems., • Implements proven counter measures and systemic improvements to eliminate recurring problems., • Ensures operation of machinery and equipment by developing and completing preventive maintenance requirements, interpreting technical drawings or diagrams, sketches, operation manuals, manufacturer's instruction, engineering specifications and plant equipment component standards. This includes maintaining and developing preventative and predictive maintenance standards and practices., • Tests, calibrates, and troubleshoots digital and pneumatic controls and plant instruments such as flow pressure, temperature, mass, moisture, and density., • Documents work performed in the maintenance-computerized database (Upkeep) to build equipment history by creating, retrieving, and closing work orders. Reviews equipment repair history for PM/PD creation or changes to current practices., • Improves site and equipment technical database through standards and site technical documentation improvements. This includes documenting work completion in Upkeep as well as supporting documentation., • Delivers red-lined drawings (as built) to appropriate person when discrepancies are identified between a drawing and actual plant conditions., • Maintains a clean, organized, and safe work area by complying with documentation, procedural and applicable regulatory requirements (such as safety, environmental and housekeeping.), • Attends and participates in required training, trains others in areas of proficiency or expertise., • Understands and follows all organizational policies, procedures, and rules, ensuring that all laws are obeyed, and equal employment, safety and environmental protection are practiced., • Must be able to work in excess of eight hours per day or forty hours per week on any shift or travel as needed. Willing to provide off-shift call-in and planned shift coverage when necessary., • Contributes to team effort by accomplishing related results as needed., • All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed., • Five (5) or more years' experience as an Electrical & Instrumentation Technician, • PLC experience, • 3 phase motor control experience, • Mechanical experience, specifically, knowledge of machines and tools, including their designs, uses, repair, and maintenance., • Ability to inspect equipment, structures, or materials to identify the cause of errors or other problems or defects., • Knowledge of pressure, flow, level, and temperature instrumentation., • Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models., • Strong problem resolution skills, • The ability to concentrate on a task over a period of time without being distracted., • The ability to respond quickly., • Must be able to perform duties in a safe manner., • Must be able to work in adverse working conditions such as heat, wet, cold, noise, etc., • Must be able to work 12-hour shifts, nights, weekends, overtime, and holidays as needed., • Strong communication skills, • Safety-sensitivity position, • Must be able to stand and walk for long periods of time., • Ability to tolerate working outdoors in all environmental temperatures and weather., • Ability to lift and carry up to 20 pounds continuously., • Repetitive movements of both hands and both feet, • Requires continuous pushing, pulling, climbing, squatting, bending, and above shoulder reach movements., • Ability to multi-task and work in fast paced environment This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and is subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible. We are an equal opportunity employer and do not make employment decisions based on a person's race, color, religion, sex, gender, sexual orientation, age, national origin, ancestry, disability, veteran status, or any other protected category under applicable federal, state, and local laws.