Trabajos carpenter en New York, New YorkCrear alertas

Job Description Laborer / Carpenter Helper needed for basic tasks. Loading and unloading material Light Demo work Site clean up Setting up protection on site Must be able to work night shift if needed. e-mail work history. Looking for candidates that have a desire to work safely. OSHA 30 / SST card required

Job Description Description G-Net Construction is hiring a full-time Lead Carpenter to support commercial interior renovation and facility maintenance projects across NYC. This is a hands-on field position for an experienced carpenter who can work independently, coordinate with supervisors, and help guide helpers or small field teams when needed. This is not a full foreman position, but it does require field leadership, strong communication, and the ability to complete quality work in active job site conditions. Responsibilities • Perform framing, drywall, doors, hardware, trim, and finish carpentry work, • Install cement board, blocking, underlayment, and related materials, • Support kitchen, bathroom, and commercial interior renovation work, • Perform rough carpentry, patching, floor repair, and miscellaneous field work, • Read basic drawings, layouts, and field instructions, • Coordinate with supervisors and other trades, • Help guide helpers or small field teams when needed, • Keep tools, materials, and job sites clean and organized Required Qualifications • 5+ years of carpentry field experience preferred, • OSHA-40 required for NYC field work, • Must be able to work on the books, • Must have own carpentry hand tools and basic power tools, • Must communicate clearly and follow direction from supervisors, • Must work neatly and keep job sites organized, • Must be able to work independently when assigned Preferred Qualifications • Staten Island resident with a valid driver’s license is strongly preferred, but not required, • Basic blueprint reading is a plus, • Door, hardware, drywall, framing, and finish carpentry experience is a plus, • Basic painting, compound, plumbing, electrical, or HVAC knowledge is a plus, • Own vehicle or reliable transportation is a plus Growth Opportunity This role has room to grow into a foreman or supervisory position for someone who demonstrates leadership, communication, quality work, and reliability. How to Apply Please apply through our Field Positions page: https://www.gnetconstruction.com/field-positions/ Include your resume, desired hourly rate, years of experience, certifications, and examples of relevant project experience. Qualified candidates will be contacted for an in-person interview.

Job Description About the Role We are seeking a skilled Custom Carpenter/Fabricator to join our team. This position focuses on fine carpentry, custom fabrication, set construction, and field installation for unique indoor and outdoor projects. The ideal candidate enjoys hands-on craftsmanship, creative problem-solving, and collaborating with a team to bring custom projects from concept to completion. Responsibilities • Perform fine carpentry for custom indoor and outdoor projects, • Build components for set designs and specialty installations, • Complete custom wood fabrication, assembly, and finishing tasks, • Assist with project installations in shop and field environments, • Read and interpret architectural drawings, fabrication plans, and millwork details, • Troubleshoot and resolve project challenges during fabrication and installation, • Collaborate with fabrication and project teams to meet deadlines, • Support other departments as business and project needs require Qualifications • Minimum of 3 years of carpentry, millwork, or wood fabrication experience, • Experience with fine carpentry, custom builds, and specialty fabrication preferred, • Ability to read and understand architectural and fabrication drawings, • Strong attention to detail and problem-solving abilities, • High school diploma, GED, or equivalent experience, • Effective communication and organizational skills, • Valid driver’s license and reliable transportation, • Ability to perform the physical requirements of the position, including lifting up to 75 lbs. with or without reasonable accommodation What We’re Looking For • A team member who takes pride in quality craftsmanship, • Someone with a positive attitude and commitment to continuous learning, • A reliable professional who enjoys working collaboratively, • Someone interested in developing skills and growing long-term within the company Equal Employment Opportunity Statement We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions of the position.

Job Description General Contracting firm specializing in healthcare renovation. Seeks motivated individual with carpentry knowledge. Experienced in renovation and new medical spaces. Must have knowledge in reading blueprints and skilled in layout, metal stud framing, drywall installation, acoustical ceiling framing, doors and hardware installation. Must have a vehicle to be able to travel to jobs within the 5 boroughs Long Island and Westchester. Projects in 5 boroughs of NYC, Long Island, and lower Westchester. Company DescriptionGeneral Contracting Firm Specializing in Healthcare construction Incorporated in 1993 Clients include major medical facilities within New York area.General Contracting Firm Specializing in Healthcare construction\r\nIncorporated in 1993\r\nClients include major medical facilities within New York area.

Job Description Overview Tradesmen International is immediately hiring experienced Carpenter Helpers for projects located in the Orangeburg, NY area. This is a first shift opportunity, and the pay rate is $24-26/hour based on experience and skill level. If you are a Carpenter Helper looking to learn and grow in your trade alongside accomplished Craft Professionals, this is your chance to further your career! Job Scope: • Measure & cut materials, • General maintenance tasks, • Keep job-site clean, • Other tasks as assigned Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description High-End Residential Carpenter – Montclair, NJ We are among the most prestigious contracting companies in NJ with a reputation for quality, professionalism, and craftsmanship. We are currently seeking a skilled, full-time carpenter who is proficient in all phases of construction, including: • Framing & finish carpentry, • Cabinets, doors, and windows, • Tiling, painting, and spackling, • General repairs and punch list work, • Familiarity with all phases of residential construction Requirements: • Own van and full set of tools, • Legal work status in the U.S., • Speaks fluent English, • Able to work independently and take initiative, • Willing and able to learn new tasks when needed, • Must replace or purchase tools promptly if missing or broken This is a hands-on role for someone who takes pride in their work and wants to grow with a company that values excellence and accountability. Pay is competitive and based on experience and capability. Application Question(s): • Own a work van and full set of tools Ability to Commute: • Montclair, NJ 07042 (Required)Company DescriptionWe are a high end contracting company that is engaged in kitchens, bathrooms, and additions.We are a high end contracting company that is engaged in kitchens, bathrooms, and additions.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Opportunity for advancement Benefits/Perks • Performance-based bonuses, • Competitive compensation, • Paid time off (PTO) after a designated period of service, • Career growth opportunities Job Summary Seeking a talented Carpenter to join our team! In this role, you will construct, install, and repair structures and fixtures of wood, plywood, and wallboard using hand and power tools. The ideal candidate is well-rounded, hard-working and dedicated to producing quality work. If you are an experienced Carpenter with a positive attitude, we want to hear from you. Responsibilities • Follow all safety rules and regulations, • Perform installations and tasks daily without supervision, • Partition framing (wood and metal), drop ceilings, joists, subfloor work, • Trim work (base, casement and crown moldings), • Finish work (hanging cabinets, closet interiors, vanity installation, etc.), • Install interior/exterior doors, windows and hardware, • Maintain a clean and safe work environment, • Read blueprints and sketchesQualifications, • Minimum of 5 years previous Carpentry experience, • Ability to read and take action on blueprints, • Ability to safely operate hand and power carpentry tools

Job Description We are looking for a highly skilled, well-rounded professional who can work independently, take ownership of projects, and lead by example while managing and working alongside crews. The ideal candidate is a hands-on leader who is comfortable running jobs from start to finish with minimal supervision. This position is for someone who takes pride in their work, accepts responsibility, solves problems on-site, and consistently delivers high-quality workmanship while keeping projects on schedule. This is a hands-on position. You will be expected to work with the crew—not just supervise. Requirements: Must have strong hands-on experience in: • Finish and rough carpentry, • Tile installation, • Basic electrical, • Basic plumbing, • Residential renovations (houses, brownstones, apartments, etc.), • Strong communicate effectively with clients, subcontractors, and management, • Ability to work independently and solve problems on-site, • Ability to read plans is a plus, • Clean, organized, and professional, • Reliable and punctual Responsibilities: • Complete projects independently from start to finish, • Lead, supervise, and work alongside one or more crews, • Maintain quality workmanship while keeping projects on schedule, • Communicate clearly with management, • Keep job sites clean, organized, and safe Additional Information: • Work primarily in Brooklyn and Queens, • Steady, year-round work, • Must have own basic hand tools, • Valid driver's license and reliable vehicle required To Apply: Please reply with your resume or a brief description of your work experience, along with your contact information. Company DescriptionDesign Tech Contracting Inc. is a respected, family-like construction firm with over 40 years of experience, specializing in local renovations and offering a supportive environment for professional growth.Design Tech Contracting Inc. is a respected, family-like construction firm with over 40 years of experience, specializing in local renovations and offering a supportive environment for professional growth.

Job Description Our company is growing and is looking to hire a carpenter with commercial experience to help with work orders that consist of night shifts and day shifts. Must have a driver's license, be able to speak English. Need some experience. The pay is based on experience and work performance. Lots of benefits do be discussed. For further contact Mike 201-937-7467

Job Description Carpenter Foreman Serious applicants only. We are not looking for helpers or entry-level carpenters. Applicants must have hands-on experience leading residential renovation projects and be capable of working independently with minimal supervision. Responsibilities: • Supervise and lead carpentry crews on residential renovation projects., • Read and interpret blueprints, drawings, and project specifications., • Perform and oversee rough and finish carpentry work., • Install cabinetry, trim, molding, doors, hardware, flooring, framing, and other finish carpentry., • Ensure all work is completed with a high level of craftsmanship and attention to detail., • Coordinate daily tasks, materials, and manpower with the project manager., • Maintain a safe, clean, and organized job site., • Inspect completed work to ensure it meets company quality standards., • Troubleshoot field issues and provide practical solutions., • Ensure compliance with OSHA regulations and company safety policies. Requirements • Strong knowledge of residential construction methods., • Proficiency with hand tools, power tools, and woodworking equipment., • Ability to accurately read blueprints and take precise measurements., • Experience with framing, drywall, trim, cabinetry, doors, molding, flooring, and general carpentry., • Excellent leadership, communication, and problem-solving skills., • Reliable transportation to job sites throughout Manhattan. Qualifications • 5+ years of carpentry experience, • 2+ years supervising crews or serving as a foreman preferred, • OSHA 30 Certification (Required), • SST 10 Certification (Required) Work Schedule • 35-hour work week, • Payroll cycle: Tuesday through Monday, • Payday: Thursday Important Only apply if you meet the qualifications above. We are seeking a skilled Carpenter Foreman who can produce high-quality work, lead a crew, and work independently. Applicants without foreman experience or residential renovation experience will not be considered. Company DescriptionASA Building Maintenance, Inc. has proudly served New York City since 1993, specializing in high-quality apartment, condominium, and townhouse renovations. We have built our reputation on exceptional craftsmanship, professionalism, and a commitment to delivering outstanding results from project planning through completion.ASA Building Maintenance, Inc. has proudly served New York City since 1993, specializing in high-quality apartment, condominium, and townhouse renovations. We have built our reputation on exceptional craftsmanship, professionalism, and a commitment to delivering outstanding results from project planning through completion.

Job DescriptionFINISH CARPENTER...ATTENTION TO DETAIL A MUST... Self Sufficient, Go Getter... Applicant must be able to run a job and do all the carpentry work on renovation jobs. Must have clean and valid drivers license. Applicant must be able to drive box trucks. Applicant must have their own hand tools.

Job DescriptionBenefits: • Opportunity for advancement, • Training & development Home Work Renovation is a boutique, high-end residential renovation company. The owners/partners of the company are both highly experienced carpenters and builders with a combined 50+ years of experience in many different aspects of construction/renovation and project management. We love to share our knowledge and teach others via the projects we build together. We are a rapidly growing company working on several active projects in Brooklyn and Manhattan. We are seeking a High-End Rough + Finish Carpenter / Renovation Specialist with 10+ Years of Experience to work side-by-side with us. We work on a wide range of Projects including Custom Bathroom & Custom Kitchen Renovations, Full Apartment Renovations & Full Townhouse/Brownstone Renovation projects. We are looking for a reliable, responsible, efficient carpenter whose confident, has a positive/humble attitude, and is looking for long term growth. Requirements: Must be a U.S. citizen OR have a work authorization card. Assistant Carpenter, capable of directing other trades and managing a small team. Great at problem solving and avoiding typical construction issues. Must be energetic, motivated, and punctual with a skillset in fine carpentry, high end finishes and millwork installations. Pictures of past work required. Must provide references. Preferred but not required 40 hrs OSHA. Ability to lift at least 50 lbs. safely without any concerns. Must have proficient verbal and written communication skills. Proficiency in reading plans. Must be capable of handling company communication via email, WhatsApp, and project management software. Able to manage a project and stay on schedule. Must own fundamental tools of the trade.

Job Description Carpenter with experience in commercial / retail construction to add to our team. We offer competitive pay based on experience and a benefit package. Candidates should be able to perform metal stud, drywall and acoustical ceiling work. We are also looking for candidates that can in addition perform the installation of cabinets, doors, windows and mill-work. Reading/interpreting construction drawings is a plus. Basic tools of the trade / OSHA 30 / SST card / Some night work is necessary Please send work history.

Job Description Position Summary: AGC is seeking an experienced Lead Carpenter / Working Foreman to join our growing team. This is a hands-on leadership role for someone who takes pride in craftsmanship while leading a small crew and representing our company on the jobsite. The ideal candidate is equally comfortable installing trim, framing walls, solving field challenges, coordinating subcontractors, communicating with homeowners and design professionals, and ensuring projects are completed safely, efficiently, and to the highest standard. This is not a supervisor-only position. Our Lead Carpenter / Working Foreman works alongside the crew every day while taking ownership of daily jobsite operations. Responsibilities • Lead daily operations on high-end residential remodeling projects throughout New York City., • Perform hands-on carpentry and general construction work., • Lead by example while supervising and mentoring a small crew., • Serve as AGC's primary on-site representative with homeowners, architects, designers, subcontractors, inspectors, and project management., • Read construction drawings and execute work according to project plans., • Plan daily work activities and keep projects progressing on schedule., • Coordinate deliveries, materials, and subcontractor activities., • Maintain exceptional workmanship and attention to detail., • Identify and solve field issues before they become larger problems., • Maintain a clean, organized, and safe jobsite., • Train and mentor junior carpenters and laborers., • Communicate daily progress, challenges, and material needs with management. Required Qualifications • Minimum 7 years of residential construction experience., • Strong carpentry skills, including framing, drywall, finish carpentry, trim, doors, hardware, cabinetry installation, and general remodeling., • Previous experience leading crews as a Foreman, Lead Carpenter, or similar leadership role., • Excellent communication and problem-solving skills., • Professional appearance and demeanor when interacting with clients., • Valid driver's license and reliable transportation., • Ability to lift 50+ lbs and perform physical work throughout the day. Preferred Qualifications The following are not required, but candidates with these skills will be given strong preference: • Ability to read, understand, and build directly from architectural and construction drawings (blueprints)., • Ability to identify discrepancies between drawings and existing field conditions before work begins., • Ability to accurately lay out work from plans with minimal supervision., • Experience coordinating with architects, designers, engineers, and project management regarding drawing revisions and field questions. Who We're Looking For: We're looking for someone who naturally takes ownership of a jobsite. You don't wait to be told what needs to be done—you anticipate the next step, solve problems before they escalate, and lead by example. You enjoy building with your hands just as much as leading others. Whether you're installing finish trim, framing a wall, coordinating a delivery, answering a homeowner's question, or helping a crew member improve their technique, you take pride in delivering exceptional work and maintaining a professional, organized jobsite. If you're passionate about craftsmanship, enjoy leading a team, communicate well with people, and want to build some of New York City's finest residential spaces, we'd love to hear from you.

Job DescriptionJob Title: Finish Carpenter Company: WestingHouse Development Inc. Location: Suffolk, Naussau and City wide in Long Island, New York Job Type: Full-Time We are seeking a skilled finish carpenter to join our team! As a finish carpenter, you will be responsible for installing and finishing a variety of woodwork in residential an commercial settings. You must be able to work independently, manage your time efficiently, and communicate effectively with clients and coworkers. Responsibilities: • Measure and cut wood to specified dimensions, • Install and finish woodwork, including baseboards, crown molding, cabinetry, and built-in shelving, • Repair or replace damaged woodwork as needed, • Communicate with clients to ensure their needs and expectations are met, • Maintain a clean and safe work environment Requirements: • At least 3 years of experience as a finish carpenter, • Proficient in using hand and power tools, • Ability to read blueprints and follow plans, • Strong attention to detail and ability to produce high-quality work, • Good communication and customer service skills, • Reliable transportation and a valid driver's license We offer competitive pay, and opportunities for growth within our company. If you are a skilled finish carpenter looking for a challenging and rewarding career, we encourage you to apply! We look forward to hearing from you!

Job DescriptionCOMPANY OVERVIEW We are a premier high-end residential construction company specializing in luxury residential projects in New York and California. For over three decades, I-Grace has been recognized for our exceptional craftsmanship, innovative design, and unwavering commitment to delivering the highest quality for our discerning clients. Join our team to lead prestigious projects and make a lasting impact on the future of luxury design. At I-Grace, we value top talent and provide a supportive, collaborative environment that fosters professional growth. We offer competitive compensation, comprehensive benefits, and ample opportunities for career development. Our leadership team has grown from within, and we take pride in developing the next generation of project leaders. POSITION OVERVIEW We are seeking a highly skilled Finish Carpenter with experience in luxury residential construction to join our team. This role is ideal for a craftsman who takes pride in precision, detail, and white-glove execution within occupied, finished homes. You will be responsible for delivering exceptional finish work, including millwork, hardware installation, and fine carpentry, while maintaining the highest standards of professionalism in client-facing environments. This is a hands-on role requiring technical expertise, strong judgment, and the ability to operate seamlessly in high-end, furnished residences. KEY RESPONSIBILITIESCRAFTSMANSHIP & EXECUTION • Execute high-end finish carpentry, including trim, moldings, cabinetry, and custom millwork, • Install and adjust premium hardware and finish materials with precision, • Perform detailed layout work and interpret blueprints accurately, • Maintain exceptional quality standards aligned with luxury residential expectationsSITE PROFESSIONALISM, • Work effectively in occupied, finished, and furnished residences, • Maintain a clean, organized, and respectful job site at all times, • Communicate professionally with team members, supervisors, and clientsTOOLS & PERFORMANCE, • Operate hand tools and power tools with advanced proficiency, • Maintain personal tools and ensure safe working condition, • Plan and execute daily work efficientlyREQUIREMENTS, • 2 – 5 years of experience in high-end / luxury residential construction, • Proven expertise in finish carpentry, millwork, and hardware installation, • Cabinet-making experience preferred, • Ability to read blueprints and perform layouts, • Experience working in occupied, high-end residential environments, • Driver’s License a plus, • A Background check, Drug screening and References will be requiredCERTIFICATIONS & TRAINING, • OSHA 30-Hour, • SST Card (Blue) Eight Hour Fall Prevention Training, Two Hour Drug and Alcohol Awareness Training, • 4-Hour Supported Scaffold Certification, • Must complete within 90 days of hire:, • Scaffolding Training, • Asbestos Awareness, • Lead Awareness, • Mold Awareness, • Silica AwarenessTECHNICAL SKILLS, • Proficiency in Microsoft Office Suite (preferred), • Experience with Microsoft Project (preferred)WORK ENVIRONMENT While performing the duties of this role, the employee is frequently exposed to: • Fumes, airborne particles, and moving mechanical parts, • Vibrations and loud construction environments, • Outdoor conditions including heat, humidity, and inclement weather The position regularly involves working: • Near active construction equipment, • In finished residential environments, • In conditions with dust, noise, and site activityPHYSICAL DEMANDS This role requires the ability to: • Lift, push, pull, and carry heavy materials, • Stand and walk for extended periods, • Perform strenuous physical labor under field conditions, • Maintain strong stamina and endurance Additional requirements include: • Excellent manual dexterity and coordination, • Ability to move quickly and safely on active job sites, • Sustained use of core strength for lifting and stabilityWHY JOIN US, • Work on premier luxury residential projects, • Be part of a team committed to craftsmanship, integrity, and excellence, • Opportunity to grow within a high-performance construction environment If you are a detail-driven finish carpenter who thrives in high-end environments and takes pride in delivering exceptional work, we encourage you to apply. EQUAL OPPORTUNITY STATEMENT We are committed to providing equal employment opportunities and maintaining a professional, respectful, and inclusive workplace in alignment with company policies. Powered by JazzHR HJ9boQu7P5

Job Description Qualified candidate will get a company van for daily use from job to job, must have minimum 10-15 years of wearing a tool belt and must still wear the belt- must be a master carpenter with hands on experience in wood house framing and custom trim work, must be able to read blue prints, must be able to layout for additions, new construction, and renovations, need to know how to perform structural wood framing including floor systems, wall and roof framing, and complete wood structural framing knowledge and ability, must be able to install custom trim, install cabinetry, build and install on-site built-ins Company Descriptioncustom residential builders, additions, new construction, renovations, restorationscustom residential builders, additions, new construction, renovations, restorations

Job DescriptionLane Valente a National maintenance and construction firm is recruiting Skilled Carpenter, willing to travel for a full-time commercial construction projects across the United States. Tradesperson must be proficient in following skills: -Carpentry-partition framing metal/wood studs, installation of basic cabinetry/countertops, installation of doors/window ·Painting-interior & exterior -Flooring-installation of VCT, LVT, tile, carpet squares and cove base Basic knowledge of the following skills: · Plumbing-replacement/installation of sinks, faucets, toilets and basic drainage and water lines (licensed plumbers encouraged to apply) · Electrical-replacement installation of light fixtures, switches and outlets, capable of basic data connections and able to diagnose minor electrical problems (licensed electricians encouraged to apply) ESSENTIAL FUNCTIONS: · Commercial renovations/buildouts · Basic computer skills · Ability to follow OSHA requirements · Presentable and possess the ability to communicate with customers to build relationships · Detailed when it comes to repairs made, including but not limited to measurements, pictures, recommendations for repairs and quotes · Ability to work overtime and/or on-call as workload and emergency issues dictate · Willing and able to travel and work overnight shifts throughout the United States when needed. TRAVEL IS A MUST!!! EDUCATION/EXPERIENCE: · Supply basic construction hand tools · OSHA 30hr or the completion of OSHA 30hr within 3 months of employment (paid by employer) BENEFITS OFFERED: · Medical, Dental & Vision Insurance · 401-K Retirement plan with generous company match · Paid vacations · Further Education/training · Company paid travel & per diem Powered by JazzHR fzVBdwNrFz

Job DescriptionJob Summary Our high-end plaster moulding shop in Greenpoint, Brooklyn is seeking an experienced craftsman/carpenter/pattern and mould maker to join our team. This role involves hands-on work in creating intricate forms and moulds, assisting with shop operations, and collaborating closely with our skilled team. Responsibilities • Fabricate and assemble patterns, moulds, and forms according to project specifications., • Read and interpret blueprints, technical drawings, and plans to accurately produce components., • Work with curves, wiggle boards, and various formwork materials to create precise shapes., • Operate shop tools and machinery safely and efficiently, including (but not limited to) saws, drills, and hand tools., • Collaborate with team members to complete projects on schedule while maintaining high-quality standards., • Maintain a clean, organized, and safe work environment., • Operate a waterjet machine (training provided if needed)., • Assist with general shop duties as needed.Qualifications, • Proven experience as a craftsman, carpenter, or mould/pattern maker, preferably in a high-end shop environment., • Ability to read and interpret blueprints and technical drawings with precision., • Experience with curves, wiggle boards, and formwork is highly preferred., • Familiarity with waterjet machines is a plus., • Strong attention to detail and craftsmanship., • Reliable and punctual; able to work in-person Monday-Friday, 7:00 AM – 4:00 PM., • Ability to lift and maneuver heavy materials and work on your feet for extended periods., • Willingness to learn and adapt to shop-specific techniques and processes.Benefits:, • On-the-job training for shop-specific processes., • Opportunity to work on high-end, unique plaster moulding projects.

Job Description Looking for a responsible and reliable carpenter who has 5+ years of experience doing the following labor: Wood and metal framing Install doors, windows, cabinets Sheetrock Wood trim Carpenter must have a car. No smoking or drugs. Job locations are in Nassau, Suffolk, Queens, Brooklyn, NYC. We offer weekly paychecks with competitive hourly wages. Please contact James at (516)665-2717 or WhalenRenoLB@gmail.com

Job DescriptionJob Summary We are seeking a skilled Drywall & Framing Carpenter to join our team. In this role, you will hang, finish, and repair drywall, frame interior and exterior walls, and install ceiling systems including drop ceilings, soffits, and specialty finishes. The ideal candidate takes pride in clean, precise work and thrives in a fast-paced construction environment. If you have hands-on experience in drywall and framing and a commitment to quality, we want to hear from you. Responsibilities • Follow all safety rules and maintain a clean, hazard-free work environment, • Read and interpret blueprints, sketches, and building plans to determine layout and material requirements, • Frame interior and exterior walls, partitions, soffits, and bulkheads, • Hang, tape, mud, and finish drywall to a job-ready standard, • Install ceiling systems including drop/suspended ceilings, drywall ceilings, and specialty finishes, • Operate hand and power tools including screw guns, levels, routers, and lifts, • Coordinate with other trades, suppliers, and site supervisorsQualifications, • Previous experience in drywall hanging, taping, or framing required, • Ability to read blueprints and apply accurate measurements, • Proficiency with drywall and framing tools and equipment, • Knowledge of building codes and safety regulations, • Ability to work overhead, on lifts, and on your feet for extended periods, • Ability to lift 50+ lbs and handle full sheets of drywall, • OSHA 40 & SST Required

Job Description Install wood trim, Cabinets, Frames ,doors and hardware

Job Description Eventscape has an exciting opportunity for a junior Carpenter (Custom Millwork Fabricator) to join our wood shop. The ideal candidate will be a skilled craftsperson with an excellent attitude and willingness to learn all aspects of architectural millwork fabrication and become comfortable with a variety of materials. ABOUT THE ROLE The custom millwork fabricator position will: • manufacture and assemble high-quality custom architectural elements and structures, • read and interpret blueprints, drawings, and sketches and to understand project specifications, • determine tolerances and test project elements, • operate all woodworking machinery, finishing equipment, power tools, and hand tools, • work with different materials, including solid surfaces, epoxy, metals, melamine, solid wood, wood products, • perform exact measurements, ensure precise installation of hardware and other elements, • perform wood finishing, sanding, staining, and applying finishes, • monitor quality across the team and ensure each piece is fabricated to a high standard, • plan and execute fabrication strategies; oversee and manage junior fabricators and assistants, • manage schedules to meet deadlines and provide consistent, regular project updates to management, • maintain awareness of inventory and requirements for upcoming projects, • ensure safe work practices are adhered to and follow all safety policies and procedures, • maintain a clean and tidy work area and facilitate required repairs and maintenance to all equipment ABOUT YOU To succeed in this role, you will have: • training from a relevant program such as woodworking, millwork, carpentry or cabinetmaking OR an acceptable combination of education, training, and experience, • experience in finish carpentry, • a passion for challenging fabrication and tight tolerances, • the ability to self-motivate and be schedule conscious, • a strong attention to detail and amazing problem-solving skills, • competency in reading and interpreting blueprints/drawings, • a thorough understanding of health and safety principles and practices, • a willingness to collaborate with a team and work independently when needed, • an in-depth understanding of fabrication processes and manufacturing/building materials, • experience with materials like wood, solid surfaces, fabric, acrylic, glass, leather, • flexibility to work occasional evenings and weekends WHY JOIN EVENTSCAPE? • claim your place in our collaborative and supportive network of multi-disciplinary architectural fabrication experts, • join in on frequent contests, celebrations, and unique social activities, • be inspired and challenged by our team of the most creative, talented, and passionate individuals, • a regular Monday to Friday work schedule, • a fast-growing company with opportunities for advancement, • enjoy being at the forefront of technological innovation with our state-of-the-art machinery, • the opportunity to work on unique and challenging projects and…, • the reward of seeing those projects come to life through fabrication and installation, • extended health and dental benefits, • be part of a socially conscious company APPLY NOW Apply now with your resume and 1-2 lines about your how your experience relates to advanced custom architectural fabrication. For more information or if you need disability accommodation, contact human resources at (416) 231-8855. We wish to thank all applicants for their interest in Eventscape, but only those selected for an interview will be contacted. Eventscape is committed to fostering a workplace in which individual differences are recognized, appreciated, and respected. Eventscape will consider all qualified candidates and welcomes and encourages applications from people with disabilities. Accommodations are available for all stages of the selection process. For more information or if you need disability accommodation, contact human resources at (416) 231-8855. We wish to thank all applicants for their interest in Eventscape, but only those selected for an interview will be contacted. Eventscape is committed to fostering a workplace in which individual differences are recognized, appreciated, and respected. Eventscape will consider all qualified candidates and welcomes and encourages applications from people with disabilities. Accommodations are available for all stages of the selection process. Powered by JazzHR KgXHXZqlsD

Job DescriptionCraftsman / Carpenter - Remodeling Experience Hiring Now in Whitestone, NY TruBlue Home Services is seeking full-time professional craftsman to serve our customers in the Whitestone/Queens area. Our Mission is to provide home remodeling and other home maintenance work to the community with the highest level of service possible. We focus on helping all types of homeowners around the city, but also truly have a passion for helping seniors and disabled. Our goal is to allow our clients to live safer and more independent lives with the peace of mind their home is cared for. We provide: -Year-Round Stable, Steady Work -Regular Work Hours -Competitive pay -Flexible Scheduling -Company Logo Wear and strong office support If you have 5 or more years of paid experience in remodeling, general carpentry, or handyman work, we want to hear from you. We are looking for: -General Carpentry -General Home Repairs and Handyman Work -Tile work -Drywall Repair / Patching / Caulking -Flooring Repair and Installation -Bathroom Upgrades / Remodel -Minor Plumbing and Minor Electrical -Painting Interior and Exterior What we value… RESPECT – We treat everyone as we want to be treated. Every voice matters. EXCEED EXPECTATIONS – We do more than expected, going above and beyond. ACCOUNTABILITY – We want to be known as a trusted partner clients can count on CONTINUOUS IMPROVEMENT– We know success means getting better each and every day. HONESTY – We are open and honesty in all our communications. Are you looking to reach for something better? Are you tired of being under-appreciated in your current job? Do you want to be part of a family business that values you? If so, we may have a position for you! We offer premium services to our clients and need team members willing and able to provide a first class experience. Are you passionate about what you do? Do you have a strong work ethic and take pride in your work? Do you enjoy helping others? Are you sincere and pleasant and enjoy customer interaction? If this sounds like you and something you might be interested in, please submit your resume and apply now Powered by JazzHR lBNU66RmMA

Job DescriptionBenefits: • 401(k), • Training & development We are seeking an experienced Carpenter with a minimum of 3 years of hands-on carpentry experience. The ideal candidate will be skilled in residential and/or commercial construction, able to work independently, and committed to producing high-quality workmanship. Responsibilities: • Read and interpret blueprints, drawings, and specifications., • Measure, cut, and install wood and other building materials., • Build, repair, and install walls, framing, doors, windows, cabinets, trim, and other structures., • Operate hand tools and power tools safely and efficiently., • Perform demolition, repairs, and finish carpentry as needed., • Ensure work is completed accurately and according to safety standards., • Maintain a clean and organized work area., • Collaborate with supervisors and other trades to complete projects on schedule. Qualifications: • Minimum 3 years of carpentry experience., • Ability to read blueprints and use measuring tools accurately., • Experience with framing, finish carpentry, and general construction., • Proficient with hand and power tools., • Ability to lift up to 50 lbs. and perform physically demanding work., • Reliable transportation and strong work ethic., • OSHA certification is a plus but not required. Benefits: • Competitive pay based on experience., • Full-time opportunity with overtime available.

Job Description Position Available Installing Vinyl -Look-Like Wood Flooring, Installing Kitchen Countertops, Installing Bathroom Ceramic Wall & Floor Tiles, Installing Kitchen Cabinetry & Installation of Doors & Sliding Closet Doors in Apartments . Applicant should own a Van for transportation & Material pickup . Please Apply as this Position tends to be a Permanent Position with years of Work Thank You . Carpentry Position may start with installing of many Range hoods in an 18-Floor or 10 Floor Building

Job DescriptionExperienced carpenter to work in our shop to make mouldings, doors, furniture etc.

Job Description Lead Carpenter – Residential Remodeling & New Builds Unique Home Remodeling Professionals, LLC — South Jersey Pay: $30/hr (Full-Time, Overtime Available) Schedule: Monday–Friday, occasional Saturdays during busy periods (40+ hours/week) Location: South Jersey & Surrounding Areas Experience Required: Minimum 5 years in residential carpentry About Us Unique Home Remodeling Professionals (UHRP) is a growing, family-operated general contracting company specializing in high-end residential remodeling, custom home builds, and additions throughout South Jersey. From $50k renovations to $1M+ new homes, we are known for our workmanship, reliability, and strong client relationships. We are seeking an experienced, motivated Lead Carpenter who can both manage job sites and perform hands-on carpentry at a high level. This position is critical to maintaining UHRP’s standards for quality and professionalism. Position Overview The Lead Carpenter will act as the primary on-site leader for residential construction projects. This is a fully hands-on role requiring strong carpentry skills, leadership ability, and the capacity to run job sites with little to no supervision. You will perform and oversee carpentry tasks, coordinate with subcontractors, maintain jobsite productivity, and ensure projects stay on schedule with high-quality results. Key Responsibilities Lead daily on-site operations for remodeling projects, additions, and new residential builds Perform hands-on carpentry including: Framing (rough + structural) Trim work (casing, baseboard, doors, crown molding, etc.) Installation of doors, windows, and architectural details Standard carpentry trade techniques required for residential construction Manage workflow, assign tasks, and maintain productivity Oversee subcontractors (electrical, plumbing, HVAC, masonry, etc.) to ensure quality and schedule alignment Read and interpret blueprints, plans, and architectural drawings Maintain a clean, safe, and organized job site Track materials, prevent waste, and manage inventory Communicate daily with project management and ownership regarding progress and site needs Ensure all work meets UHRP quality standards and complies with building codes Represent UHRP professionally when interacting with clients and homeowners Required Qualifications Minimum 5 years of residential carpentry experience (must be proficient in framing & trim) Strong understanding of standard carpentry techniques, tools, and safety procedures Ability to run job sites independently and lead small crews when needed Reliable transportation to job sites Must have your own carpentry tools and tool belt Ability to lift 50+ lbs regularly Ability to follow schedules, meet deadlines, and maintain a high level of organization Strong communication and problem-solving skills Dependable, punctual, self-motivated, and hardworking What We Offer Competitive pay at $30/hr 40+ hours per week during busy periods (overtime available) Consistent year-round work Opportunity for advancement as the company continues to grow Family-oriented and supportive work environment Involvement in high-end residential projects and custom home builds Why Work With UHRP? You will work directly with ownership and be a key part of a company that is rapidly expanding. We value professionalism, craftsmanship, and teamwork — and we reward employees who show initiative, leadership, and dedication. At UHRP, you’re not “just a carpenter” — you’re the driving force behind projects that homeowners rely on and trust. How to Apply Submit your resume, work history, or a brief summary of relevant experience. Candidates must meet the required qualifications to be considered.

Job DescriptionBuilt for Delivery Green Leaf Construction was founded in 2014 by professionals with decades of experience providing construction management and design build services. Our team is well positioned to support clients from project conception to final construction. By offering turnkey, client-oriented services, we are better able to act in the project’s best interest to control the value, quality, and timeliness of the end product. Our dedicated personnel work seamlessly with each client to create an integrated and efficient project team. We have a wide range of experience in construction techniques and delivery methods, and have built facilities for clients in advanced technology, healthcare, scholastic, commercial and industrial markets. The Mission As a travelling Carpenter, you’ll take senior-level ownership of high-visibility commercial builds—driving outcomes, protecting schedule, and setting the craftsmanship bar on jobs that move. Key responsibilities • Lead and shape complex framing, blocking/backing, doors/hardware, finish work, and temporary works as projects evolve, • Interpret blueprints/specs, execute precise layout, and verify dimensions with lasers/transits (total station preferred), • Coordinate daily with the superintendent and trades to keep production flowing and conflicts down, • Run tools/equipment safely and efficiently; uphold OSHA and site safety expectations, • Spot constructability issues early and propose practical field solutions, • Mentor carpenters/apprentices and uphold professional jobsite standards Required qualifications • 10+ years commercial carpentry experience; able to work independently and lead crews, • Strong layout/measurement skills; high quality, safety, and schedule focus, • OSHA 30 (or obtain immediately), valid driver’s license/clean record; able to travel/overnight If you’re ready for strategic impact in Commercial Construction and Design Build, apply now. On the Road, On Point You roll into a new site ready to make an immediate mark—checking the plan set, aligning with the Foreman/superintendent on priorities, and setting a crisp pace for the crew. Travel and overnights are part of the rhythm, and each stop brings a fresh puzzle: tight tolerances, shifting site conditions, and coordination moments where your judgment keeps momentum alive. Between lifts, layout checks, and punch-list pushes, you’re the steady hand that keeps quality sharp and clients confident. By day’s end, you’ve advanced the build, cleared tomorrow’s constraints, and left the site cleaner, safer, and closer to turnover—classic Commercial Construction, delivered with Design Build intensity. Total Rewards Medical, dental, and vision insurance; 401(k); life insurance and voluntary life insurance; Health Savings Account (HSA); AFLAC cancer, critical illness, and accident coverage; paid time off; employee discounts; pet insurance; competitive total compensation ($30–$50/hour). As part of the hiring process you may be required to submit to a background, drug and alcohol and/or motor vehicle check.

Job Description Ecotone seeks a skilled finish carpenter with experience in commercial and luxury projects in NYC. We aim to identify an individual with a background in the trades, who thrives in being hands-on with a small team, knows their way around the wood shop and job site, and enjoys building. This individual can manage detailed finish carpentry installations, technical millwork installations, fine woodworking details, and coordination between our Brooklyn shop and job site locations. A requisite for this job is a familiarity with the logistics and challenges of a city-based installation team on job sites in and around the city. This individual should also have experience in a woodshop and with production techniques of install-ready components. Work would be split between fabrication work at the shop and installation work on job sites, sometimes requiring more shop work and sometimes requiring more installation work. Responsibilities • Success in this position depends primarily on a passion for building., • This critical role player should be at home in the field and the shop with other trades, working closely with management and in-house construction and design teams., • Our operation is a design and build, so this role requires a technical understanding of custom millwork and a willingness to work alongside designers to incorporate technical knowledge of the process into the design for logistical considerations., • Comfortable with taking the lead on developing and implementing installation processes., • As a critical role player, this individual should understand what contributes positively to our culture., • Strong communication skills, excellent follow-through, and a detail-oriented inclination are prerequisites., • Takes an intermediate to lead role in various phases of millwork production and on-site millwork installations, including but not limited to the following:, • Millwork panels, • Custom wooden benches, • Plywood casework, • Tongue and Groove cladding, • Finish / Trim Carpentry, • Works alongside other installers and fabricators when required., • Willingness to travel within NY and NJ for occasional travel installations., • Provides clarifications and in-field solutions to the construction and design teams during the fabrication and installation. Qualifications • Osha 30, SST, etc. A competent person and related cards are a bonus., • 3-5 Years minimum previous experience in relevant wood shop fabrication role., • 3-5 Years of background experience hands-on in a skilled trade, ideally millwork., • Knowledge of materials, construction techniques, details, methods, and tools., • Must be able to communicate their ideas and solutions quickly., • Strong interpersonal relationship skills and emotional intelligence., • Flourishes in a role where the team is counting on them., • Ability to learn new technology and adjust to new work patterns., • Strategic, creative thinker, troubleshooter, and problem solver, capable of identifying inefficiencies, assessing issues, developing systems, and implementing solutions., • Takes ownership of installation workflow., • Collaborative and enjoys working as an integral part of a small team. Additional Details • This is a full-time position., • This position will be based out of our Brooklyn shop but is primarily in the field., • Salary Range commensurate with experience., • For the right candidate, there is room to grow with a growing company into a foreman/construction manager role., • The ability to coordinate trades and manage materials ordering / logistics provides incentives for Ecotone to fastrack the growth of this role player within the company.Company DescriptionBased in Brooklyn, Ecotone's full-service design and construction studio creates revitalizing wellness spaces, including spas, indoor gardens, and public works. As a design/build operation, Ecotone has developed expertise in several practice areas, including in-house technical & architectural design, precision fabrication, commercial construction management, and specialty trade contracting. Detail, quality, professionalism, and craftsmanship are the cornerstones of our foundation as a firm. Our team recognizes that passionate and talented people are critical to our business's success and design approach. Therefore, we seek to foster and develop long-term working relationships within our organization and network.Based in Brooklyn, Ecotone's full-service design and construction studio creates revitalizing wellness spaces, including spas, indoor gardens, and public works. As a design/build operation, Ecotone has developed expertise in several practice areas, including in-house technical & architectural design, precision fabrication, commercial construction management, and specialty trade contracting. Detail, quality, professionalism, and craftsmanship are the cornerstones of our foundation as a firm. Our team recognizes that passionate and talented people are critical to our business's success and design approach. Therefore, we seek to foster and develop long-term working relationships within our organization and network.

Job DescriptionSalary: $25hr - $35hr Over-hire Carpenters A dynamic and rapidly growing Brooklyn-based fabrication shop is looking for highly-skilled Carpenters to work with us as fabricators and builders on an overhire and project-to-project basis. Carpenters are expected to build projects while working closely with other staff members to efficiently and effectively produce a wide variety of fabrication work. Candidates for the position should have either great experience in carpentry-based builds or be proficient in most aspects of fabrication techniques within The Factory NYCs scope. Responsibilities include: • Fluent in English, • Good communication and interpersonal skills, • Ability to read and understand shop drawings, • Strong math skills, • Experience and knowledge of handheld and stationary tool use and maintenance, • Fabrication shop experience, • Excellent knowledge of wood products and dimensional lumber, • Must be able to lift 75 lbs Additional but not required Skills: • Scenic Work Experience, • Truck Driving Experience, • Advanced Metalworking and Welding, • CNC Milling Experience, • Rhino and 3D Modeling experience Position Type: Overhire Starting Compensation: $25hr -$35hr This position is Overhire / Project to project and available immediately. This position will include a compensation rate commensurate with experience level. The Factory NYC is a custom fabrication shop with multiple locations in Brooklyn NY. Although we are primarily a wood fabrication facility, we specialize in all types of fabrication and installation projects. This includes large and small experiential events, architectural millworks, custom art pieces, retail spaces, and photo sets. Our facilities have multiple CNC machines, laser cutters, 3D printers, and wood and metal shops. The current team has a variety of backgrounds that help us tackle a wide array of builds and we are looking for someone with a varied background and skill set to help facilitate a flexible and readied work environment. Please visit our website to see what we do: www.thefactorynyc.com If you think you would be a good fit at The Factory NYC and have the required experience, please send your resume and work samples.

Job Description Experienced Carpenter / Millwork Installer Complete Carpentry Group LLC is looking for an experienced carpenter to join our growing team. We specialize in high-end residential and commercial millwork installations. Requirements • Prior carpentry experience is required, • Must be able to communicate in English, • References are required, • Valid driver’s license is a plus, • Must be reliable, punctual, and have a strong work ethic, • Ability to work independently and as part of a team, • Experience with cabinetry, millwork, trim, and finish carpentry is preferred Responsibilities • Install custom cabinetry, millwork, wall panels, trim, and other finish carpentry, • Read and follow shop drawings and installation plans, • Maintain a clean and organized job site, • Work professionally with clients and team members, • Ensure high-quality workmanship and attention to detail Competitive pay based on experience. If you’re an experienced carpenter who takes pride in quality work and wants to be part of a professional team, we’d love to hear from you. Please submit your resume along with your references.

Job Description We are seeking a skilled Finish Carpenter with experience in hanging doors, installing crown molding, and performing general trim work to join our team. Key Responsibilities: • Install and hang doors with precision and attention to detail, • Install crown molding, trim, and other finish carpentry elements, • Ensure all work meets high-quality standards and specifications, • Maintain a clean and organized work environment Qualifications: • Proven experience in finish carpentry, specifically with doors, crown molding, and trim installation • Strong attention to detail and craftsmanship, • Ability to work independently as well as part of a team, • Reliable and committed to maintaining a safe work environment Compensation Benefits: • Starting pay: $20/hour, • 2-week observation/trial period, • 1 week paid vacation, • 7 paid federal holidays We are looking for someone who is dedicated to delivering quality work and is ready to contribute to our growing team. If you meet the qualifications and are interested in joining us,

Job DescriptionG-Net Construction Corp. is looking to hire skilled Full-Time Carpenters for many ongoing projects within all Five Boroughs of NYC. We are in search of Carpenters who specialize in Kitchens and Bathrooms. Responsibilities: • Ability to read and interpret blueprints., • Assisting supervisors with structural design, planning, layout, and installation., • Conduct repair work and installation of doors, windows, drywall, cabinets, stairs, and other fixtures as required., • Demo & Install New Bathrooms & Kitchens in Group Homes & Commercial Spaces. Requirements: • Good communication skills., • Physically fit with good hand-eye coordination., • Clean Driver's License, • Fluent in English., • OSHA 40 REQUIRED!, • 10 years experience., • Own tools are a MUST., • Should live in Staten Island, Brooklyn, Queens and Bronx. Send your resume with salary requirements through the job listing. We are looking to hire those who have been in the building construction industry for over 10 years with references. Employment Ad Keywords: Carpentry, Painting, Structural, Plumbing, Electrical, Blueprint Reading, English, Communication Skills, Project Management, Managing Crew, OSHA, Detail Oriented, Construction Management, Scheduling, Construction Experience, Framing, Deck Installation, Doors, Hardware, Windows, Flooring.

Job Description We are seeking a skilled and detail-oriented Carpenter to support our high-end residential staging operations. This role is responsible for building, modifying, repairing, and installing custom furniture, millwork, and staging elements that align with our luxury design standards. The ideal candidate has strong craftsmanship, a keen eye for design, and the ability to execute quickly in a fast-paced, deadline-driven environment. Hourly range will vary depending on candidate's experience We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Busy general contractor looking for full time Residential skilled carpenter to work in South Orange and surrounding towns.. We do high end residential renovations.

Job DescriptionYNB Quality Stairs is a Brooklyn-based custom stair shop specializing in high-end residential and commercial stairways. We build custom curved staircases, custom handrails, and fine architectural fittings to exacting standards. We are looking for a skilled Custom Stair & Handrail Carpenter to join our team. This is hands-on craft work for someone who takes pride in precision joinery and finished results. What you'll do: - Build and install custom staircases, including curved and radius stairs - Fabricate and fit custom handrails, balustrades, and railing systems - Produce custom fittings and architectural millwork to spec - Read shop drawings and take precise field measurements - Layout, cut, and assemble stair components (treads, risers, stringers, newels) - Finish work to a high standard for residential and commercial installs What we're looking for: - Experience in finish carpentry, stair building, or architectural millwork - Strong understanding of stair geometry and layout - Proficiency with hand and power tools; ability to work to tight tolerances - Attention to detail and pride in craftsmanship - Reliable, able to work both in the shop and on-site Compensation: $28 - $38 per hour, depending on experience.

Job Description Carpenters helper wanted for commercial healthcare construction company. Must have knowledge of metal stud framing, drywall, door and frame installation as well as ceiling work. Work in Brooklyn and Queens we are willing to train! all applicants must be vaccinated as all work is in healthcare facilities like Nursing homes and Doctors offices. Company DescriptionGeneral Contracting Firm Specializing in Healthcare construction Incorporated in 1993 Clients include major medical facilities within New York area.General Contracting Firm Specializing in Healthcare construction\r\nIncorporated in 1993\r\nClients include major medical facilities within New York area.

Job Description We are currently seeking a highly skilled Carpenter to construct, erect, install, and/or repair structures and fixtures made of wood e.g. concrete forms and building frameworks, including partitions, joists, studding, and rafters, wood stairways, window, and door frames. Applicants should also be skilled in the installation of hardwood floors. Additional skills such as installing cabinets, siding, drywall and batt or roll insulation are also a plus. Our ideal candidate is comfortable working in diverse settings to produce steady and functional infrastructure and products, possessing great hand dexterity and an eye for detail. Good working knowledge of wood properties and other carpentry materials and the use of all necessary tools is a must. S/he should be capable of working with little supervision while following all health and safety standards. Carpenter Duties and Responsibilities • Ability to read blueprints, drawings, and sketches and to fully grasp requirements., • Accuracy taking measurements and calculating the size and amount of material needed for a project., • Skilled in use of all tools necessary to cut, shape and smooth lumber and other material (e.g. fiberglass) according to measurements., • Able to build window frames, doors, staircases, brattices, and frame buildings by using raw materials or pre-constructed items., • Able to install items such as hardwood floors, siding, cabinets, drywall, and insulation a plus, • Skills needed to lay out flooring, roofing, and drywall, ensuring they are level, plumb, and installed with as little waste possible., • Inspect products and conduct repairs or maintenance as needed., • Ability to assemble/build scaffolding and other needed construction structures. Carpenter Requirements and Qualifications • High school diploma., • Significant work history as a Carpenter., • Hands-on experience working with carpentry materials., • Strong working knowledge of carpentry techniques and methods, including installation and construction., • Proficient in using electrical and hand tools as well as measurement tools., • Ability to accurately read blueprints and technical drawings., • Willingness to comply with safety guidelines at all times., • Solid basic math skills., • Good physical condition, stamina, and dexterity. Company DescriptionMamais Construction is an experienced full service General Contractor located on the upper west side in Manhattan. A family owned and operated business proudly serving the New York area since 1968. In our long history of existence we have successfully completed numerous projects. We are a strong service based company providing excellence in Quality and Service.Mamais Construction is an experienced full service General Contractor located on the upper west side in Manhattan. A family owned and operated business proudly serving the New York area since 1968. In our long history of existence we have successfully completed numerous projects. We are a strong service based company providing excellence in Quality and Service.

Job DescriptionBenefits: • Bonus based on performance, • Paid time off, • Training & development Home Work Renovation is a boutique, high-end residential renovation company. The owners/partners of the company are both highly experienced carpenters and builders with a combined 50+ years of experience in many different aspects of construction/renovation and project management. We love to share our knowledge and teach others via the projects we build together. We are a rapidly growing company working on several active projects in Brooklyn and Manhattan. We are seeking a High-End Rough + Finish Carpenter / Renovation Specialist with 10+ Years of Experience to work side-by-side with us. We work on a wide range of Projects including Custom Bathroom & Custom Kitchen Renovations, Full Apartment Renovations & Full Townhouse/Brownstone Renovation projects. We are looking for a reliable, responsible, efficient carpenter whose confident, has a positive/humble attitude, and is looking for long term growth. Requirements: • Must be a U.S. citizen OR have a work authorization card., • Able to autonomously foresee problems, come up with a viable solution and be able to work alone or with a team., • Pictures of past work required., • Must provide references., • Preferred but not required 40 hrs OSHA., • Able to perform various manual and skilled labor tasks including but not limited to flooring, framing, trim and various other carpentry., • Ability to lift at least 50 lbs. safely without any concerns., • Must be highly motivated, consistently punctual and able to accomplish tasks with a positive/humble attitude., • Must have proficient verbal and written communication skills., • Must have experience with high-end millwork installations., • Proficiency in reading plans., • Must be competent with email, text message and company communications/software., • Able to manage a project and keep said project on schedule on a daily basis., • Must have personal tools., • Able to comfortably take the lead when needed.

Job DescriptionDescription:G-Net Construction is hiring a full-time Carpenter Foreman to manage commercial interior renovation and facility maintenance projects across NYC. This is a hands-on supervisory position for an experienced carpenter who can manage small field crews, coordinate daily work, communicate with the office, and keep projects moving safely and efficiently. We are looking for someone who can lead by example, work neatly, communicate clearly, and help maintain G-Net’s standards for quality, teamwork, and professionalism. Responsibilities: • Supervise small field crews on commercial interior renovation projects., • Read plans, review daily work, and coordinate field tasks ., • Manage job site layout, materials, tools, equipment, and daily progress., • Coordinate with project managers, office staff, clients, and other trades., • Track manpower, schedules, deliveries, and job site needs., • Enforce safe work practices and proper use of PPE., • Perform hands-on carpentry work when needed., • Maintain clean, organized, and professional job sites., • Communicate field issues, changes, and project needs clearly and promptly. Required Qualifications: • 7+ years of carpentry field experience preferred., • Prior foreman, crew leader, or field supervisor experience preferred., • OSHA-40 required for NYC field work., • Must be able to work on the books., • Must have own carpentry hand tools and basic power tools., • Must communicate clearly with office staff, field staff, clients, and trade., • Must be able to manage small crews and maintain daily job site organization. Preferred Qualifications: • Staten Island resident with a valid driver’s license is strongly preferred, but not required., • Commercial interior renovation experience is strongly preferred., • Basic blueprint reading and layout skills are strongly preferred., • Experience with schools, healthcare, nonprofit, senior care, or occupied buildings is a plus., • Own vehicle or reliable transportation is a plus. Growth Opportunity:This role has room to grow for someone who can manage people, communicate well, maintain quality standards, and support G-Net’s commercial construction and facility maintenance work. How to Apply:Please apply through our Field Positions page: https://www.gnetconstruction.com/field-positions/ Include your resume, desired hourly rate, years of experience, certifications, and examples of relevant project experience. Qualified candidates will be contacted for an in-person interview.

Job Description Job Description Looking for a personable and experienced Site Foreman to lead the team on our projects, while fulfilling one of the skilled trade roles needed on site. You will be the point of contact for both workers and supervisors and you will be a key person for the projects success. You must be well-organized and ensure that safety is an on site priority. Physical requirements are: Stand, walk, or sit for extended periods; Stoop, kneel, or crouch; Talk, hear, see, read and write; Use your hands and fingers to handle, feel or move objects, tools or controls; Use a smartphone; tablet or other device Use first aid equipment, a fire extinguisher and power and hand tools; Lift, move and carry objects up to 75 pounds. Responsibilities Work and report directly to the Project Manager: Coordinate tasks according to priorities and plans; Monitor the attendance of crew; Plan and deligate general and daily responsibilities; Supervise workers and subcontractors; Site safety precautions are met; Resolve problems when they arise; Report on progress to Project Manager You are available and eligible to start full time employment in the U.S. Experience 5+ years experience in high-end home renovation in Brownstones or High-End Co-ops and Condos Prior experience as Site Foreman and / or Carpenter In-depth knowledge of construction procedures, equipment and OSHA guidelines General understanding of electrical and mechanical systems Ability to read drawings and plans Good physical condition and stamina OSHA 30 and / or SST 42 Worker Card / SST 62 Supervisor Card Pay & Benefits Competitive base salary based on experience and skill level Career path opportunities Generous vacation policy, 401K program, transit reimbursement and maternity & paternity leave. Company DescriptionPaid Vacation and Holidays.Paid Vacation and Holidays.

Job Description Carpenter/Apprentice for Cold Storage Specialty Construction Overview: -This role is for a member of a cold storage installation team, this crew installs insulated metal wall and ceiling panels, insulated doors, sheet metal trim, etc. The role is a great opportunity for a willing and hard working individual to turn an entry level job into a career. Requirements: -Valid Drivers License and ability and willingness to drive vans/trucks -Ability to lift more than 50lbs consistently/daily -Ability to show up on time every day -Ability to work at elevated heights -Ability/Knowledge to read a tape measure -Ability/Knowledge to read level and lasers for plumb and square -Ability to use power tools, including but not limited to circular saws, drills, reciprocating saws, etc. Competencies (A plus, but not a requirement): -Carpentry experience -Ability to read construction documents, engineering drawings and plans -Use and familiarity with use of fork lifts and aerial platform lifts Certifications (A plus, but not a requirement): -OSHA 30 -Aerial platform certification -DOT physical Company DescriptionSmall design-build construction/refrigeration company specializing in cold storage and food production facilities. Great customer base, opportunities to work on a variety of interesting projects. Make a career at S&S Refrigeration Co.Small design-build construction/refrigeration company specializing in cold storage and food production facilities. Great customer base, opportunities to work on a variety of interesting projects. Make a career at S&S Refrigeration Co.

Job DescriptionDescription: Specialty Millwork and Fixture Installation Contractor seeking Career Minded Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing cabinets, casework, wall panels, column wraps, millwork and standing and running trim in commercial and retail environments. Requirements: Education: High School, Trade School or Equivalent Experience: Five years installation and Commercial or Retail finish carpentry experience. One year minimum supervisory experience. Conditions of employment · Undergo pre-employment DRUG SCREENING, CRIMINAL BACKGROUND CHECK and MVR screening for approved driving status. · Complete a Company Sponsored CPR/First Aid Training course online. · Available to work overtime as needed. A typical workweek is 40 to 60 hours. · Flexible to work non-conventional shifts if needed (overnight projects may occur). · Able to travel from home for durations of 2-8 weeks. · Provide your basic hand tools and cordless drill. · Certifications: OSHA 10 or 30, Forklift, aerial lift (Training will be provided as needed). Responsibilities and skills · Capable of managing and motivating others. · Able to interact professionally with clients, general contractors and sub-contractors. · Clearly and effectively communicate with Project Management Team · Personnel management of various crews ranging from 3-8 people. · Interpret layouts for millwork, fixtures and other elements. · Evaluate site conditions, construction and delivery schedules. · Identify non-contract scope and generate added work changes if necessary. · Working knowledge and understanding of architectural drawings, shop drawings and floorplans, woodworking tools. · Receive, stage and manage inventory of millwork and fixture parts. · Perform all tasks of a working carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Submit time sheets, expense reports, daily reports and progress photos electronically. · Support a strong commitment to site safety. Physical Demands Ability to walk and stand for extended periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long and Short-term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. “OUR CORE VALUES DRIVE EVERY DECISION AND AREINTERWOVEN INTO EVERYTHING WE DO”We lead the pack. We are fair, honest and respectful in every interaction.We got your back. We support and encourage doing what’s right,even when it’s not easyWe have fun. We inspire, have passion, and create fun in all that we do.We get it done. We are driven to hold ourselves accountable in making “yes” happen.

Our Team as a Carpenter Apprentice! Are you looking to kickstart your career in the carpentry trade? We are seeking a Carpenter Apprentice to join our team in Queens, NY.As an entry-level position, you will receive hands-on training and mentorship from experienced carpenters while working on a varie

Job Description We’re hiring a Foreman for one-of-a-kind, high-end residential project. Dowbuilt foremen are bags-on lead carpenters and the right hand of our site superintendents. They are responsible for reading plans and lining-out subcontractors and crew. About 50% of their time is spent on tools and putting high-quality work in place, while communicating expectations with precision and clarity. This position sets a well-rounded lead carpenter up for a successful transition into a superintendent role over time, while working with teams, that are dedicated to the highest levels of quality and craftsmanship. WHAT YOU’LL DO As a foreman, you’ll show an aptitude for leadership, build positive relationships, and demonstrate a willingness to go above and beyond to ensure that the design intent and project goals are met. You’ll be responsible for: • Putting work in place; this is a bags-on role, executing framing carpentry, while also lining out other crew members and sub trades, • Layout, • Participation in quality control for all scopes of work - self performed as well as subcontracted, • Assisting in creating site documentation and as-built drawings, • Serve as first point of contact for subcontractor questions, • Collaborate with subcontractors to find solutions; come to superintendent with possible solutions to problems, be willing to come to the table prepared and engaged in the process, • Estimating materials and time to perform work proposed, • Being able to run small projects as a working lead; coordinate crew to maximize productivity, • Working with the superintendent to create daily schedule and take responsibility for its execution, • Being the company representative when the superintendent is unavailable, • Opening and closing the job site as requested, • Discussing work with clients, architects, partners and inspectors with diplomacy, clarity, and patience as necessary, • Maintaining effective, respectful communication with field crew, subs, clients, partners, and team, always, • Minimizing material use to prevent waste and unnecessary cost, • Managing material deliveries, handling, storage, and placement, • Being a positive advocate for safety in action and attitude; reinforce awareness to reduce the risk of injury or citation and know OSHA requirements for your location and site, • Maintaining a safe and secure site (i.e., ensure safety of all people, tools, and materials), • Maintain accurate documentation in the daily job log WHAT YOU NEED TO SUCCEED To be successful as a Dowbuilt foreman, you’ll need: • 6+ years high-end residential carpentry experience; highly competent and skilled in framing, • The ability to read and interpret architectural drawings and specifications; understand vertical and horizontal control lines, • Advanced construction math skills, • The ability to think ahead and see the big picture. Understand the WHY behind the work and how what you're doing today will impact what's coming next, • Proficiency with proper use of tools and equipment and full complement of tools including specialty tools, • Excellent communication and team-building skills, • Ability to take and give direction, • Technical constructability knowledge and experience with both traditional and new materials, • Reliable transportation and a clean driving record, • U.S. work authorization, • The ability to communicate in Spanish at a conversational level is highly preferred WHAT WE OFFER We are a fun, easygoing bunch of professionals who take a lot of pride in the work we do. We acknowledge the contributions and talents of our team members by providing benefits that support you at work and in life: • Competitive pay commensurate with skills and experience, • 100% paid Medical, Dental, Vision, short-term disability and $50k in basic life insurance for full-time employees – 1st of the month following DOH, • 35% Medical and 30% Dental + Vision coverage for eligible dependents, • 401(k) retirement savings plan with 3% employer safe harbor contribution, • 8 paid holidays each year, no waiting period, • Paid Time-Off (PTO) – 0.046 hours per 1 hour worked (approx. 12 days for full-time employees) with an increase to this accrual each January with years of service up to max of 176 hours/22 days annually, • Annual tool stipend and tool loan policy, • Education/Tuition Reimbursement program, • Opportunities to build for Dowbuilt in other regions, if desiredThe base pay range for this position is $42.00 - $54.00 per hour. Actual compensation within this range will be determined based on factors including, but not limited to, relevant experience, skills, education, certifications, geographic location, and internal equity. New hires typically start below the midpoint of the range, with the opportunity for growth and advancement over time WHO WE ARE Dowbuilt is a construction company founded in 1980, and today our talented teams can be found from coast to coast. We excel at cutting-edge, innovative, never-been-done-before residential projects and home service—all of which require precision and impeccable attention to detail. We work with top architects, and our builds are regularly featured in publications such as Architectural Digest and Architectural Record. The Dowbuilt culture is one of care—care for our employees, clients, and the talented craftspeople we partner with—resulting in care for the incredible designs we bring to life. HOW YOU'LL GROW We’re committed to investing in our team members’ ongoing professional development. At Dowbuilt, we want everyone to have equal opportunity to play to their strengths, fill gaps in knowledge, and grow professionally. We believe that effective career development requires two-way, open communication between employee and manager. Expectation setting happens on both sides, along with support, mentorship, and goal setting at regular intervals. Find out where your career will take you at Dowbuilt. Dowbuilt is an equal opportunity employer that values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Powered by JazzHR kerzpr2XPa

Job Description General Summary The building Superintendent is to maintain the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. Essential Job Functions/Responsibilities: A building Superintendent must possess a variety of skills encompassing most of the construction trades, including basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as being able to perform all the responsibilities of a porter, should the situation warrant. The building Superintendent must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. The building Superintendent will oversee or be involved with such items as touch up paint in the lobby, repair of a faulty house lock, troubleshooting an open electrical short, replacement of a faucet, proper handling of an extension ladder and inspection of resident issues all in the same day. The work involves building management, project management, report production, and using state of the art property management software to achieve results at the residential building. • Vacant Apartments: Daily inspections of all vacant apartments. Direct staff accordingly to complete tasks in vacant apartments. Ensure apartments labeled as ‘READY” are perfect on a daily basis., • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights and GFI receptacles., • Painting: Oversee and schedule painting needs in common area and apartments, • Appliance repair: includes the repair, replacement, or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Groundskeeping: maintain neat and safe conditions between weekly landscape contractor visits. Report, • Cleaning/housekeeping includes supervision of staff to ensure we maintain a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas., • Snow removal: includes shoveling, blowing, or plowing snow away from covered walkways and driveways, and laying down rock salt/ice melt products atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with residents when providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent Gateway in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner following company guidelines., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner as per company guidelines., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide a high level of service to the residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent and/or management personnel of shortages., • Mechanical systems: Inspect and maintain boilers, pumps & other mechanical systems. Report concerning issues to the superintendent or management personnel., • Supervise: As part of a management team effort provide supervision of building staff (Security Guards / Handymen / Porters/ Doormen), • Identify: Responsible for identifying any building work that is required and communicate it to the Sr. Superintendent /Property Manager., • Vendor Management: Shared responsibilities to supervise any contractor work in the building., • Compliance: Shared responsibilities to ensure overall compliance of all equipment and systems., • Service Contracts: Responsible for monitoring & managing all service contracts for the building., • Cleanliness / Curb Appeal: Responsible for cleanliness & appearance of the building., • Inventory: Responsible for inventory management of all cleaning supplies & materials., • Service Requests: Responsible for the timely completion of all tenant service requests., • Apartment Turnover: Responsible for the timely preparation of apartment turn-over process, • ADP Payroll & Union Staff Time Off Management – Work with Sr. Superintendent to ensure union payroll is completed as per deadlines. Manage union staff time off to make sure all positions are properly covered. Qualifications: • Appearance: Neat, clean well-groomed appearance, • Education: College degree in Engineering or related studies or equivalent - a plus, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler and residential sprinkler systems., • Experience: 5 to 8 years of experience as a building Superintendent., • Manage Staff: 3-to-5-year experience supervising a diverse staff., • Interpersonal & Communication: Excellent verbal & written communication and interpersonal skill including conflict resolution necessary for working with staff and coworkers., • Diversity: Experience working with people of different income levels and ethnic backgrounds., • Organization: Proficient in the use of paper and software organizational systems., • Computer Skills: Must be proficient and comfortable using the computer and a full suite of software programs, • Must be able to work effectively in a fast paced, dynamic environment, • Must be able to quickly organize and shift priorities, • Must be able to meet tight deadlines with quality work, • Must have a strong & committed work ethic, • Bi-lingual or Tri-lingual - a plus Skills: An employee in this position must be knowledgeable and skilled in a variety of trades: • Working knowledge of boilers and building systems, • Working knowledge of mechanical systems, • Working knowledge of general plumbing, • Working knowledge of electricity and electrical systems, • Working knowledge of carpentry, • Working knowledge of DHCR rules and regulations Requirements • Constant need (66% to 100% of the time) to document maintenance and complete forms, review manuals and operating instructions, read cautionary labels, respond to written instruction from staff and residents. Constant needs to see small detail when performing routine maintenance duties., • Frequent need (33% to 60% of the time) to see things clearly beyond arm’s reach (oversee assistants, observe problems throughout the property)., • Constant need (66% to 100% of the time) to communicate with assistants, resident staff, vendors and residents. Must use listening skills to diagnose needed repairs, etc., • Constant need (66% to 100% of the time) to verbally communicate with assistants, staff, peers, supervisors, vendors and residents., • Indoors (66% to 100% of the time). Frequently outdoors (33% to 66% of the time), all conditions, often for extended periods., • Occasional exposure (1% to 33% of time) to paint fumes, solvents, adhesives, etc. Example: Apartments during/after make-ready., • Frequent need (33% to 66% of the time) to work in awkward and confining positions. Reasoning Development Must be able to apply principles of logical thinking to a variety of practical situations and accurately follow standardized procedures that may occasionally involve minor deviations. Needs ability to think rationally beyond a specific set of instructions and problem solve. In order to achieve success, the Management team must embrace certain core principles and values. • Honesty, • Integrity, • Competence, • Tenacity & Enthusiasm, • Creativity, • Professionalism This job description in no way states or implies that these are the only duties to be performed by the employee(s)/ incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. The organization is an equal opportunity employer.

Job DescriptionWe are looking for a skilled and reliable CARPENTER to join our team! The ideal candidate should be experienced in: • Framing., • Crown Molding., • Trim Work., • Cabinet Installation., • Decking Installation. Requirements: • Must have proven carpentry experience., • Must be bilingual in English and Spanish., • Must have a valid driver's license and reliable transportation., • Must be dependable, detail-oriented, and able to work. Independently or As Part of A Team: • Pay Based on EXPERIENCE., • Great opportunity to grow with a busy, well-established company., • Work primarily in Nutley, New Jersey. FULL-TIME POSITION. To apply, please call our office at 201-280-4122 or send your resume/work history to our email: Fsg_construction@aol.com.