Trabajos quality inspection en HalifaxCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Barnsley / Doncaster cluster, covering areas like Barnsley, Doncaster, Mexborough, Conisbrough, Thorne, Askern, Bentley, Goldthorpe, Wath‑upon‑Dearne. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;} \n Pratap Partnership is proud to be partnering with a long-established UK engineering and manufacturing business that delivers high-quality solutions across the healthcare, industrial, and research sectors. Renowned for providing comprehensive end-to-end services, the company supports its loyal client base through every stage of the process, from design and manufacture through to installation, testing, commissioning, and ongoing maintenance. \n Due to continued growth and a strong order book, they are looking to recruit an experienced CNC Programmer / Operator to join their skilled and established engineering team. Key Responsibilities\n\n • Program, set, and operate CNC mills, lathes, and machining centres.\n, • Read and interpret engineering drawings and technical specifications.\n, • Create and modify CNC programs using CAM software and G-code.\n, • Set tooling, fixtures, datums, and machine offsets.\n, • Conduct first-off inspections and in-process quality checks.\n, • Measure components using precision inspection equipment.\n, • Troubleshoot machining issues and identify process improvements.\n, • Complete production documentation and maintain quality standards.\n, • Carry out routine machine maintenance.\n, • Adhere to all Health & Safety procedures and best practices.\nAbout You\n To be successful in this role, you will have: \n\n • Proven experience programming, setting, and operating CNC machinery.\n, • Strong knowledge of G-code and engineering drawings.\n, • Experience using precision measuring and inspection equipment.\n, • Excellent attention to detail and strong problem-solving skills.\n, • The ability to work independently and as part of a team.\n, • An engineering or machining qualification such as NVQ, BTEC, or City & Guilds.\n, • Experience with Fusion 360, Mastercam, or similar CAM software.\n, • Knowledge of Fanuc, Haas, Siemens, or Heidenhain control systems.\nWhat's On Offer?\n\n, • Join a highly respected specialist offering stability, variety, and genuine opportunities for career progression. \n, • Competitive salary, dependent on experience\n, • Overtime opportunities\n, • Ongoing training and development\n, • Modern, well-equipped workshop environment\n, • Long-term career prospects within a growing business\nReady for Your Next Challenge?\n If you're a skilled CNC Programmer / Operator looking to join a thriving business where your expertise will be valued and rewarded, we'd love to hear from you. \n Apply today or contact Pratap Partnership for a confidential discussion about this exciting opportunity.

QESH Manager | Cleckheaton | Full-time, Monday to Thursday 8:00 am 4:45 pm, Friday 8:00 am 12:30 pm | £45,000 per annumOur client is a long-established subcontract precision engineering manufacturer supplying the valve, filtration and defence industries. Established in 1974, the company employs 35 people and operates around 30 CNC machines, generating an annual turnover of approximately £3 million.With over 50 years of engineering expertise and a strong reputation for quality, reliability and precision manufacturing, they are looking to appoint an experienced QESH Manager to take ownership of the company's Quality, Environmental, Health and Safety activities at their Cleckheaton facility.This is a key role working closely with the Managing Director, production teams and inspection department to maintain compliance, drive continuous improvement and support the company's ongoing success.The RoleAs QESH Manager, you will be responsible for leading the company's integrated Quality, Environmental and Health & Safety systems while ensuring the highest standards are maintained across the manufacturing operation.The role will include:Taking ownership of the company's Quality Management System (ISO 9001), ensuring ongoing compliance and continual improvementSupporting the management of Environmental and Health & Safety systems (ISO 14001 and ISO 45001)Managing and developing the inspection function and supporting inspection personnelWorking closely with production teams to improve quality performance and reduce waste, scrap and non-conformancesLeading internal audits and supporting external customer and certification auditsManaging corrective and preventive actions (CAPA), including customer complaints and internal quality issuesConducting root cause investigations and implementing effective improvement actionsReviewing quality data, producing management reports and identifying opportunities for improvementSupporting health, safety and environmental initiatives across the businessDelivering toolbox talks, promoting safe working practices and supporting employee wellbeingMaintaining quality documentation, procedures and compliance recordsWorking with customers and suppliers to resolve technical and quality-related issuesRequirementsEssentialPrevious experience in a Quality, QESH, Quality Engineering or similar management role within an engineering manufacturing environmentStrong experience and understanding of machining, inspection and metrology is essentialEngineering manufacturing background with the ability to understand technical drawings, specifications and material certificationExperience managing and maintaining ISO 9001 Quality Management SystemsExperience with internal audits, non-conformance management and continuous improvement activitiesStrong understanding of manufacturing processes, quality assurance and inspection techniquesExperience carrying out root cause analysis and implementing corrective actionsProven people management skills with the ability to lead, motivate and develop a teamExcellent communication skills with the ability to work effectively with management, production teams, customers and suppliersStrong problem-solving ability with a proactive approach to improving processes and standardsDesirableExperience managing Environmental and Health & Safety activitiesExperience working with ISO 14001 and ISO 45001 systemsISO Internal Auditor or Lead Auditor qualificationIOSH Managing Safely qualificationIEMA qualification or equivalent environmental certificationApprentice-trained Mechanical EngineerExperience within subcontract precision engineering, valve, filtration or defence sectorsWhats In It For You£45,000 annual salary24 days holiday plus Bank HolidaysCompany pensionEarly finish every FridayOpportunity to join a successful and long-established engineering businessKey leadership role with direct influence on company performanceSupportive working environment with an experienced engineering teamOpportunity to shape and improve QESH standards across the businessTraining and professional development opportunitiesStable, full-time permanent positionWhats next? Its easy! Click APPLY now! We cant wait to hear from you!Your data will be handled in line with GDPR.TPBN1_UKTJ

Job Title: Milling Programmer / Setter / Operator - Heidenhain Location: Halifax, West Yorkshire Hourly Rate: £17.50 - £19.80 (Experience Dependent) Employment Type: Full-time Shift Pattern: Day Shift – 38 hours per week Working Hours: ⦁ Monday to Thursday: 7:00am – 3:30pm ⦁ Friday: 7:00am – 1:00pm Job Description My client is seeking an experienced Milling Programmer / Setter / Operator to join their precision machining team. This role is ideal for a skilled CNC machinist with hands-on experience programming, setting, and operating 3 and 4 Axis vertical milling machines using Heidenhain controls. You will be machining high-precision components from a variety of materials, including exotic and hard-to-machine alloys such as Inconel and Nitronic, to exacting quality and tolerance standards. Key Responsibilities ⦁ Program new CNC milling jobs directly at the machine using Heidenhain controls ⦁ Set up and operate vertical milling machines ⦁ Load, prove, edit, and optimise CNC programs ⦁ Accurately set up and load fixtures, vices, and tooling ⦁ Machine components from materials including Inconel, Nitronic, stainless steels, and other high-spec alloys ⦁ Interpret engineering drawings and technical specifications ⦁ Select appropriate tooling, feeds, speeds, and cutting strategies for exotic materials ⦁ Carry out first-off and in-process inspection to ensure quality compliance ⦁ Maintain tight tolerances and high surface finish standards ⦁ Identify and resolve machining, tooling, and process issues ⦁ Maintain a clean, safe, and organised working environment ⦁ Comply with all company health, safety, and quality procedures Skills & Experience Required ⦁ Proven experience as a CNC Milling Programmer / Setter / Operator ⦁ Strong working knowledge of Heidenhain CNC control systems ⦁ Experience operating vertical milling machines ⦁ Ability to program directly at the machine ⦁ Experience machining exotic or hard-to-machine materials (e.g., Inconel, Nitronic) ⦁ Confident in fixture setup, tooling selection, and work offset setting ⦁ Strong understanding of cutting tools and advanced machining practices ⦁ Ability to work accurately to tight tolerances ⦁ Self-motivated with excellent attention to detail ⦁ Able to work independently and collaboratively within a team Desirable (but not essential): ⦁ Experience with one-off, prototype, or small batch production ⦁ Background in precision or high-integrity industries (aerospace, oil & gas, medical, motorsport) ⦁ Knowledge of continuous improvement or lean manufacturing techniques Benefits ⦁ Competitive salary dependent on experience ⦁ Stable day shift working pattern (38 hours per week) ⦁ Early finish on Fridays ⦁ Modern, well-equipped machining environment ⦁ 32 days of annual leave, including: ⦁ Christmas period (approx. 5 days) ⦁ All UK statutory holidays (8 days) ⦁ 144 hours (19 days) flexible leave to use as you wish ⦁ Long-term career opportunity within a respected precision engineering company WHAT NEXT? Have you the experience? The company welcomes a site visit to ensure you are happy with the role, the environment, and the people you will work with! If you would like to speak to someone about booking a site visit, please contact Antony Brunn on (phone number removed) for more information or send an email to (url removed) Immediate starts are available! Workforce Technical place skilled and in-demand professionals on permanent and contract roles across Engineering, Technical, and Manufacturing sectors—from Shop Floor Personnel and Specialist Engineers to Supervisory and Management positions. Operating throughout Central England, our Specialist Consultants understand your skills and provide the best advice on your next career step. We’re always searching for top talent—if you know someone suitable, why not recommend them to one of our team who will be happy to help. MEAB

CNC Turner | Cleckheaton | Full-time, Monday to Thursday 8:00 am 4:45 pm, Friday 8:00 am 12:30 pm | £35,000 - £37,000 DOEOur client is a well-established subcontract production facility serving the valve, filtration and defence industries. Established in 1974, the company employs 35 people and operates around 30 CNC machines, generating an annual turnover of approximately £3 million.With decades of engineering expertise and a strong reputation for quality and precision, they are looking to recruit an experienced CNC Turner to join their growing team in Cleckheaton.The RoleThis role involves manufacturing high-precision components to customer drawings and specifications, as well as other duties such as:Setting and operating Fanuc-based CNC lathesEditing Fanuc programsConducting in-process inspection of your own workUsing conventional measuring equipment and coordinate measuring machines (CMMs)Working to tight tolerances in a high-precision environmentSelecting and setting cutting toolsMachining small batch and one-off componentsReading and interpreting engineering drawingsMaintaining high standards of housekeeping and qualityWorking collaboratively as part of the production teamRequirementsEssentialPrevious experience as a CNC TurnerExperience setting and operating Fanuc-based CNC lathesAbility to read and work from engineering drawings with minimal supervisionExperience using micrometres, callipers, gauges and other measuring equipmentKnowledge of machining processes, speeds and feeds for a variety of materialsExperience working to tight tolerancesStrong attention to detail and quality standardsAbility to use initiative and work independentlyA positive attitude and willingness to work as part of a teamDesirableExperience programming Fanuc CNC lathesExperience using Coordinate Measuring Machines (CMMs)Knowledge of multiple machining disciplinesWhats In It For You24 days holiday plus Bank HolidaysCompany pensionStatutory Sick Pay (SSP)Tooling providedSafety boots and overalls providedEarly finish every FridayOpportunity to work for a long-established and successful engineering businessTraining and development opportunitiesSupportive team environment with extensive engineering knowledgeStable, full-time position within a growing companyWhats next? Its easy! Click APPLY now! We cant wait to hear from you!Your data will be handled in line with GDPR.TPBN1_UKTJ

Mechanical Fitter / Assembly Fitter£39,604.60 per annum | Monday to Friday Days | 18 Month Fixed Term ContractWorking HoursMonday - Wednesday: 7:30am - 4PMThursday: 7:30am - 3PMFriday: 7:30am - 12:00 noonEnjoy an early finish every Friday as part of a great work-life balance.Benefits 266 hours annual leave (including bank holidays) Pension - Up to 8% employer contribution Death in Service - Up to 5x basic salary (when enrolled in the pension scheme) Health Care Cash Plan - reimbursement towards healthcare appointments, including dental, physiotherapy and other eligible treatmentsMechanical Fitter OpportunityAn exciting opportunity has arisen for an experienced Mechanical Fitter to join a global engineering manufacturer with an outstanding reputation for quality, innovation, and technical excellence.Due to continued growth and increased customer demand, we are looking to recruit a Mechanical Fitter to join a busy manufacturing team on an 18-month Fixed Term Contract.Working within a modern manufacturing facility, you'll become part of a skilled team assembling complex, precision engineered mechanical products to the highest quality standards.LocationBased in Huddersfield , with excellent access from Leeds, Bradford, Halifax, Wakefield, Rochdale, Oldham, Barnsley, Sheffield, and Manchester.Key ResponsibilitiesAs a Mechanical Fitter, you will: Assemble and disassemble precision mechanical assemblies to engineering drawings and work instructions Read and interpret technical drawings Use a variety of hand tools and measuring equipment to complete mechanical builds Complete inspection sheets and production documentation accurately Work closely with Quality and Engineering teams to ensure products meet specification Identify and report build issues, assisting with fault Maintain high standards of workmanshipWhat We're Looking ForTo be successful in this role, you will ideally have: NVQ Level 3 Mechanical Engineering, Mechanical Fitting or similar (or equivalent apprenticeship) Previous experience as a Mechanical Fitter, Assembly Fitter or Production Fitter Ability to read and interpret engineering drawings Experience working within heavy engineering, defence, aerospace, or another manufacturing environment is advantageous Ability to work independently and as part of a teamWhy Apply?This is an excellent opportunity to join a respected global engineering company. You'll benefit from excellent working hours, a competitive salary.Additional InformationAll candidates must have the right to work in the UK and will be subject to security and export control restrictions.Security clearance will be required for this role.To ApplyIf you're an experienced Mechanical Fitter looking for your next challenge, we'd like to hear from you.Please submit your CV to:TPBN1_UKTJ

We are actively recruiting for a dynamic Sales Manager who lives in the Leeds area who is very familiar with the construction industry. Your day to day duties includes selling within the testing inspection and certification arenas to SME's and corporates alike. You will be a strong communicator, utilising a combination of email, telephone and face to face engagement. You will proactively look for opportunities to improve sales and lead management process. You will be used to selling products, e-commerce, online, SEO, mobile, social media and web services. You will exceed quality and customer satisfaction targets on a regular basis. This is effectively a home working role, but you are expected to be out visiting existing/new clients most days. You will need to handle your own administration and visit the UK Head Office in the South East once per month, having team meetings with your peers. In return the company offer a salary of £50,000 - £55,000pa a commission structure, life insurance, 25 days holiday rising to 30 days plus Bank Holidays. Apply now! Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Our team has an established track record of successfully delivering major multidisciplinary rail projects working from our regional offices in London and Croydon and interfacing with other regional teams and Global design centres. We are now looking to enhance and grow this team with a Principal Rail Low Voltage Design Engineer. As an individual you will have delivered rail projects to client’s satisfaction at the appropriate standard, ensuring accuracy of drawings and calculations, ensuring designs are economic, constructable and appropriate and that the relevant codes and standards to be complied with. You will have strong business development and client relationships skills and the ability to develop and manage the work of others. The team provides design, assessment, inspection, construction support and management services on a wide range of rail projects and our services offered to our clients include feasibility studies, outline designs and detailed designs. You will take responsibility for the technical and commercial delivery of key rail projects, with a particular focus on low voltage (LV) systems, including Points Heating, Lighting, and Signalling Power. The team provides design, assessment, inspection, construction support and management services across a wide range of rail infrastructure projects. Our work spans the full lifecycle from feasibility studies and outline design through to detailed design and delivery. Provide Expertise: Be responsible for the technical and commercial delivery of projects, with a specific remit to develop AECOM’s rail LV and substation capabilities within the Electrification and Power (E&P) team. You will be an individual who holds excellent track record of delivering various projects as a CRE/Lead Engineer role. Collaborate: Receive brief from Project Manager and cascade through team members. Ensure Quality: Develop concept and detailed designs including calculations reports and specifications. Check CAD drawings and design documentation produced by team members /liaise with designers and CAD Technicians. Prepare and check the technical reports. Anticipate: Support development of project specifications for construction. Attend site during construction phase if necessary to ensure construction is in accordance with specifications/drawings. You will have a very good understanding of Health and Safety including CDM. • BSc, BEng or MEng degree in Electrical Engineering, • Chartered Engineer (or working towards) and member of a professional institution, • Proven track record in railway Electrification & Power design and delivery as a CRE or Lead Design Engineer Ideally you will be experienced in the use of Network Rail, London Underground, Railway Group Standards as well as the relevant British Standards and Eurocodes. We recognise a variety of experience and backgrounds may suit this role and that experience levels in specific technical areas may vary. If you feel you only meet some of the requirements below or have transferrable skills, we would still love to hear from you! We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _ At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you #EVB About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Electrical Design Engineer - Renewable Energy (Solar PV) Location: Remote (UK-wide travel required) Salary: £50,000 - £60,000 per annum Employment Type: Full-time, Permanent A rapidly growing company in the renewable energy sector is seeking an experienced Electrical Design Engineer to join their team. This is an exciting opportunity to support the design and delivery of Solar PV systems across a wide range of commercial and industrial projects. This role is ideal for a qualified electrician or electrical engineer looking to move off the tools into a technical design-focused position, while still using their on-site expertise to drive quality and performance in sustainable infrastructure projects. Key Responsibilities Conduct on-site electrical surveys to assess suitability for solar PV installations Identify electrical defects or installation challenges and document findings clearly Prepare detailed electrical design documentation, bill of quantities, and scope of works Use design software such as Trimble or ElectricalOM to create accurate system layouts Liaise with technical teams to prioritise and coordinate survey activities Travel nationwide as required, using a company-provided van Compile and submit professional reports including photos, survey data, and recommendations Ensure designs comply with industry regulations and safety standards Requirements Strong background in electrical installations and regulations Experience with solar PV design and site assessment (commercial focus preferred) Qualified with: NVQ Level 3 18th Edition Wiring Regulations (BS 7671) AM2 Level 3 Testing & Inspection (C&G 2391, 2394/2395) Level 4 Design & Verification (C&G 2396 or EAL) - desirable Solar qualification (C&G, EAL, or BPEC) - advantageous Proficient in design software (e.g., Trimble, ElectricalOM) Excellent IT and report-writing skills Full UK driving licence (over 25 for insurance purposes) Self-motivated and organised, able to manage workload and travel independently Why Apply? This is a fantastic role for a qualified electrical professional ready to take the next step in their career, working at the forefront of the UK's clean energy transformation. Join a supportive team driving real environmental impact through cutting-edge design and engineering. Apply now to learn more about this opportunity in the fast-growing renewable energy space. Innotech Partners limited (12587274) acts as an Employment Agency and is a subsidiary of Talentia Group.

Quality Control Inspector | Cleckheaton | Full-time, Monday to Thursday 8:00 am 4:45 pm, Friday 8:00 am 12:30 pm | £30,000-£36,000 DOE Our client is a well-established subcontract production facility serving the valve, filtration and defence industries. Established in 1974, the company employs 35 people and operates around 30 CNC machines, generating an annual turnover of approximately £3 million. With decades of engineering expertise and a strong reputation for quality and precision, they are looking to recruit an experienced Quality Control Inspector to join their growing team in Cleckheaton. The Role This role involves inspecting high-precision components to customer drawings and specifications, as well as other duties such as: • Carrying out first-off, in-process and final inspections, • Inspecting components against customer drawings and quality standards, • Producing inspection reports to meet customer requirements, • Using conventional measuring equipment, including micrometres, callipers and gauges, • Programming and inspecting components using CMM and vision measurement equipment, • Calibrating internal measuring equipment, • Maintaining the company calibration log, • Inspecting small batches and one-off components

Nursery Manager Huddersfield Permanent – Full Time Position to start August Overview Reed Education are recruiting on behalf of a well-established, independent nursery in Huddersfield. Operating since 1986, the nursery provides 62 places for children aged 3 months to 5 years, alongside an out-of-school and holiday club. The setting is based within a spacious four-floor Victorian building. Due to upcoming changes within the leadership team, this is an exciting opportunity for an experienced Nursery Manager to take ownership and lead the nursery into its next phase. The Role As Nursery Manager, you will take full responsibility for the day-to-day running of the setting, ensuring high standards of care, education, and operational performance. Key Responsibilities • Oversee daily operations across all rooms, ensuring consistency and quality, • Lead, motivate, and develop a team of approximately 13 staff, • Maintain compliance with Ofsted, safeguarding, and EYFS requirements, • Manage staffing, including ratios, rotas, recruitment, and performance, • Build strong relationships with parents, staff, and external professionals, • Lead on inspection readiness and continuous quality improvement, • Foster a positive, high-performing team culture

a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; } Pratap Partnership is proud to be partnering with a long-established UK engineering and manufacturing business that delivers high-quality solutions across the healthcare, industrial, and research sectors. Renowned for providing comprehensive end-to-end services, the company supports its loyal client base through every stage of the process, from design and manufacture through to installation, testing, commissioning, and ongoing maintenance. Due to continued growth and a strong order book, they are looking to recruit an experienced CNC Programmer / Operator to join their skilled and established engineering team. Key Responsibilities • Program, set, and operate CNC mills, lathes, and machining centres., • Read and interpret engineering drawings and technical specifications., • Create and modify CNC programs using CAM software and G-code., • Set tooling, fixtures, datums, and machine offsets., • Conduct first-off inspections and in-process quality checks., • Measure components using precision inspection equipment., • Troubleshoot machining issues and identify process improvements., • Complete production documentation and maintain quality standards., • Carry out routine machine maintenance., • Adhere to all Health ...

Quality Manager - Huddersfield, West Yorkshire - 12 month contract - c£400 per day (inside IR35 contract) - major infrastructure project As a Quality Manager, you will be responsible for the following: • Monitor the preparation and operation of the Project Execution Plan (PEP) in line with the context of the project and governance of client specification and design., • Support and advise the Agent and Quality Engineer on the effectiveness of the project quality system and implementation of the PEP., • Assist project staff in preparing procedures required by the project and the PEP., • Advise and report on suitability of subcontractor and supplier quality systems., • Liaise with Document Controller / Information Manager to ensure the correct naming convention (metadata) is used for issuing project quality information, • Ensure quality management system documents including site procedures, inspection and test plans, checklists, registers of NCR's, corrective actions and root cause analysis, quality inspections and audits are developed, maintained and effectively communicated., • Monitor the implementation of the quality assurance system by the site team, subcontractors, suppliers and client., • Support with the preparation of site procedures, activity plans and assurance records to ensure that staff have comprehensive and complete records for work carried out., • Maintain the programme of...

Company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Manufacturing Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables. The successful Manufacturing Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse. Key Responsibilities of the Manufacturing Engineer will include: Provide manufacturing engineering support to production and assembly teams, ensuring quality, safety, and delivery targets are met. Act as the key link between Engineering and Manufacturing, providing clear technical guidance to production teams. Support design reviews and manufacturability assessments to achieve efficient, right-first-time production. Lead PFMEA activities, process mapping, and risk reduction initiatives to improve manufacturing performance. Maintain manufacturing documentation, including drawings, work orders, routings, and technical packs. Design tooling, fixtures, and manufacturing methods while ensuring compliance with safety and quality standards. * Collaborate with internal teams and suppliers to drive continuous improvement, quality, and process efficiency. For the Manufacturing Engineer role, we are keen to receive CV's from candidates who possess: Proven experience in manufacturing engineering, with a strong understanding of machining and assembly processes. Ability to interpret technical drawings, create manufacturing documentation, and apply GD&T principles. Experience of CNC programming, process development, and continuous improvement within a manufacturing environment. Proficiency in engineering systems and software, including SAP and 2D/3D CAD packages. * Strong metrology and inspection skills, with experience using precision measurement equipment to verify component and assembly accuracy. Salary & Benefits: Competitive salary of up to £50,000, based on skills and experience Standard Monday to Friday working pattern 37.5-hour working week Generous holiday allowance of 25 days plus Bank Holidays Employer pension contributions of up to 8% Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role. To apply for the Manufacturing Engineer role, please click 'Apply Now' and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. TPBN1_UKTJ

a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; } Pratap Partnership is proud to be partnering with a long-established UK engineering and manufacturing business that delivers high-quality solutions across the healthcare, industrial, and research sectors. Renowned for providing comprehensive end-to-end services, the company supports its loyal client base through every stage of the process, from design and manufacture through to installation, testing, commissioning, and ongoing maintenance. Due to continued growth and a strong order book, they are looking to recruit an experienced CNC Programmer / Operator to join their skilled and established engineering team. Key Responsibilities Program, set, and operate CNC mills, lathes, and machining centres. Read and interpret engineering drawings and technical specifications. Create and modify CNC programs using CAM software and G-code. Set tooling, fixtures, datums, and machine offsets. Conduct first-off inspections and in-process quality checks. Measure components using precision inspection equipment. Troubleshoot machining issues and identify process improvements. Complete production documentation and maintain quality standards. Carry out routine machine maintenance. Adhere to all Health & Safety procedures and best practices. About You To be successful in this role, you will have: Proven experience programming, setting, and operating CNC machinery. Strong knowledge of G-code and engineering drawings. Experience using precision measuring and inspection equipment. Excellent attention to detail and strong problem-solving skills. The ability to work independently and as part of a team. An engineering or machining qualification such as NVQ, BTEC, or City & Guilds. Experience with Fusion 360, Mastercam, or similar CAM software. Knowledge of Fanuc, Haas, Siemens, or Heidenhain control systems. What's On Offer? Join a highly respected specialist offering stability, variety, and genuine opportunities for career progression. Competitive salary, dependent on experience Overtime opportunities Ongoing training and development Modern, well-equipped workshop environment Long-term career prospects within a growing business Ready for Your Next Challenge? If you're a skilled CNC Programmer / Operator looking to join a thriving business where your expertise will be valued and rewarded, we'd love to hear from you. Apply today or contact Pratap Partnership for a confidential discussion about this exciting opportunity. TPBN1_UKTJ

Senior Mechanical Design Engineer An established engineering and manufacturing organisation specialising in industrial flow control technologies is seeking a Senior Mechanical Design Engineer to join its advanced engineering and product development function. This role offers the opportunity to lead the development of high-performance valve and pressure-containing equipment for critical industrial applications across sectors including energy, process industries, utilities, cryogenics, and infrastructure. The successful candidate will play a key role in new product development, engineering validation, design optimisation, and manufacturing support within a multidisciplinary technical environment. Position Summary The Senior Mechanical Design Engineer will be responsible for the concept generation, detailed mechanical design, and lifecycle engineering support of engineered valve products and associated actuation systems. The role requires strong expertise in pressure equipment design, mechanical integrity, materials engineering, and manufacturing integration. The engineer will collaborate closely with production, quality, testing, and project engineering teams to ensure products meet operational, regulatory, and customer performance requirements. This position is suited to an experienced engineer with a strong background in industrial valve design, pressure systems, or rotating/static mechanical equipment operating in demanding service environments. Key Responsibilities • Lead the design and development of industrial valve assemblies and flow-control products from concept through to manufacture and qualification, • Produce detailed 3D models, manufacturing drawings, assembly documentation, and engineering BOMs using CAD systems, • Perform engineering calculations and analytical assessments including:, • Stress analysis, • Pressure containment verification, • Torsional and bending analysis, • Deflection and buckling calculations, • Fatigue and mechanical integrity assessments, • Support and review Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) studies where applicable, • Ensure compliance with relevant international standards and pressure equipment regulations, including:, • PED, • ASME, • API, • ISO, • BS/EN standards, • Interpret technical specifications, datasheets, process conditions, and client engineering requirements, • Select suitable materials based on pressure, temperature, corrosion, erosion, and service conditions, • Develop actuator sizing calculations and fail-safe operating philosophies for automated valve systems, • Support manufacturing activities including machining, casting, fabrication, assembly, inspection, and hydrostatic/pneumatic testing, • Provide technical support during product validation, commissioning, root-cause investigations, and non-conformance resolution, • Generate and maintain engineering documentation including:, • Design reports, • Risk assessments, • Manufacturing procedures, • Installation, Operation & Maintenance (IOM) manuals, • Technical datasheets, • Conduct design reviews and technical verification activities to ensure compliance, quality, and manufacturability, • Manage multiple concurrent engineering projects within defined technical, cost, and schedule constraints, • Interface with internal stakeholders, suppliers, and customers on technical matters where required Technical Requirements, • Strong understanding of valve operating principles, sealing technologies, pressure boundary design, and actuation systems, • Experience designing pressure-containing mechanical equipment for industrial or process applications, • Proficiency in CAD software such as:, • SolidWorks, • AutoCAD, • Equivalent 3D modelling platforms, • Working knowledge of:, • GD&T, • Tolerancing and fits, • Material specifications, • Manufacturing methods and DFM principles, • Familiarity with:, • FEA/structural simulation tools, • CFD analysis methodologies, • Pressure testing and validation procedures, • Understanding of manufacturing processes including:, • CNC machining, • Casting, • Welding/fabrication, • Assembly and inspection, • Ability to independently produce technical calculations and engineering justification reports, • Strong analytical, problem-solving, and decision-making capabilities Qualifications & Experience, • Degree in Mechanical Engineering or related engineering discipline (or equivalent industry experience), • Minimum 5 years experience in mechanical design engineering within:, • Valve manufacturing, • Pressure equipment, • Fluid systems, • Oil & gas, • Energy, • Process engineering, • Heavy engineering sectors Additional Attributes, • Strong technical communication and documentation skills, • Ability to work within multidisciplinary engineering teams, • High attention to detail and engineering quality standards, • Commercial awareness and practical manufacturing understanding, • Proactive and solution-oriented mindset Employment Details, • Full-time, permanent position, • Competitive salary and benefits package dependent on experience, • Hybrid/flexible working may be available depending on business requirements JBRP1_UKTJ

Vehicle Technician/Auto Electrician {.Local Mobile Patch in and around Bradford.Lots of Overtime + Door to Door Pay.Progression+ Training + Company Benefits and more.Vehicle Technician/Auto Electrician.

Job Description: Job description We require experienced electricians to start on a commercial project based in Halifax working on a Hospital.Description commercial electrical installation Monday to Friday 3 months - £26ph Person Specification JIB IPAF (preferred not essential ) Commercial experienc

Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Supplier Quality Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations

Hours – Monday to Friday, 8:00am – 4:30pm.We are looking for an experienced Electrical Installation Engineer to join our workshop team, specialising in the installation of electrical systems and equipment into commercial vehicles.This is a hands-on role suited to someone with a strong electrical

Electricians - Required near Bradford, West Yorkshire.I am recruiting for 2 x experienced Industrial Electricians for a project in Shipley (BD18).If you are an Industrial Electrician with a JIB Gold Card (and ideally an IPAF), who has previous experience of working with conveyors or automated equipm

Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 couriers.Were recruiting self-employed delivery drivers in your area now.We have opportunities ranging from a few agreed days each week

Conduct inspections, testing, and planned maintenance of electrical installations and fire safety systems.

Job Title: Electrician (Summer Refurbishment).Contract Duration: 6 Weeks (Summer Holiday Period).Hours: 8am/4pm - Monday to Friday.To support the school's summer refurbishment programme by carrying out electrical installation, alteration, testing, and maintenance works.The successful contractor will

Work collaboratively with production, engineering, and quality teams to meet build deadlines. Complete quality checks and documentation to support vehicle handover and compliance.

We are looking for an Auto Electrician to join our busy depot located in Keighley.This is a highly rewarding, specialized career that offers the chance to work with complex diagnostics, keep local communities moving, and help drive the transition to sustainable, green transportation.

Are you looking for a role that offers steady work, genuine long-term prospects, and plenty of overtime? CDS Labour are currently looking for an experienced 18th Edition Electrician to join an award-winning construction and maintenance company where you will be working across various commercial and

Job DescriptionJOIN EVRI PREMIUM, A NETWORK OF DHL THIS SUMMER Is this your next job Read the full description below to find out, and do not hesitate to make an application.Self-employed Multi-Drop Van Drivers wanted.This summer, hit the road

Solar PV Electrician £280-£350 a day Are you an experienced Solar PV Electrician, looking to join a well established business within the renewable sector, where you will directly influence the trajectory of the company? On offer is the opportunity to join an expanding company, giving you the chanc

Job DescriptionBe your own boss.Qualifications, skills, and all relevant experience needed for this role can be found in the full description below.Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through

Early Morning Delivery Drivers Needed!.Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK.Were looking for reliable, self-employed delivery drivers who are ready to hit the road and make an impact in their local community.Join a tea

We pride ourselves on our commitment to quality, customer satisfaction, and environmental responsibility.

Job DescriptionBe your own boss.Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first.Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion p

Salary: Competitive Salary + Bonus + Excellent Benefits Delivery Driver 7.Leeds - Pipe Centre So, who are we?.We are Pipe Centre, part of the Wolseley Group - a leading specialist trade merchant across the UK and Ireland.We pride ourselves in putting our people and customers at the heart of everythi