Trabajos welder en Honolulu, HawaiiCrear alertas

Job DescriptionStructural Shipyard WeldersWork Location: In and around Joint Base Pearl Harbor Hickam. Pay: $25-$32 dependent on weld test and interview. Must be eligible to get DBIDS and TWIC, clean background going back 10 yearsProficient in welding SMAW (stick). Knowledge and experience in GTAW (TIG) and Braze. Fluxcore process is helpful but not required. Must pass NAVSEA weld test for higher rates. Will need to pass a 3-position test plate in 2g, 3g, and 4g. All plates will be sent out for RT examinations and approval with our sub KTR.

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: • Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor., • Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations., • Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements., • Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data., • Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation., • Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive., • Immediately report all symptoms or suspected symptoms as early and accurately as possible., • Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation., • Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others., • Assist in the training of new personnel or tenders., • Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits., • Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site., • Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others., • Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance., • Ensure their medical certificates are up to date and recorded in their logbook., • Present their logbook to the Diving Supervisor on every job., • Maintain current certification in first aid and CPR., • Complete administrative office duties as assigned. JOB REQUIREMENTS: • Graduate of a professional diving school., • Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability., • Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld)., • Significant physical effort required. Significant exposure to physical risk., • Ability to pass annual diving physical., • Ability to obtain a U.S. Government security clearance., • Able and willing, to travel worldwide, on short notice for indefinite periods of time. Ability to pass a pre-employment drug/alcohol screen and physical, as required. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Job Description Are you a skilled welder who enjoys the road and takes pride in quality work? Tanco Engineering is seeking dedicated Storage Tank Welders to join our traveling crew. With over 40 years of industry leadership, we offer more than just a paycheck—we provide a stable, long-term career built on safety, reliability, and mutual respect. Our team takes pride in delivering top-quality work while supporting each other every step of the way. If you’re ready to put your skills to work with a company that values craftsmanship and commitment, we want to hear from you. Requirements: • 1+ year(s) experience in welding above ground storage tanks., • Must pass the following weld tests:, • SMAW 2G, 3G, & 4G, • FCAW 2G, 3G, & 4G, • Must obtain and maintain active status within the drug testing program and pass background screening., • TWIC card may be required., • Be able to lift 50 lbs., • Must have excellent attendance and show up to work on time every day.Responsibilities:, • Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding., • Read and interpret blueprints to ensure your welding tasks meet all specifications., • Inspect your work for quality control, promptly addressing any issues you may uncover., • Work alongside your team to ensure projects are completed efficiently and on time., • Maintain a safe work environment by following all safety protocols., • Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. PAY & BENEFITS: • $125/day subsistence, • Medical, dental, and vision, • ESOP & 401k This position is a traveling position, requiring flexibility to work anywhere within the United States. We are seeking qualified candidates nationwide who thrive in a collaborative, traveling environment and are motivated to contribute to a dynamic and growing team. Hiring Nationwide with Immediate Needs In: WI, CA, IL, & TX (Corpus Christi, TX-locals only) We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Applicant must be AWSD1.1 certified and have a minimum 5 years experience in performing welding techniques on various types of materials for heavy equipment repair work, piping and fabrication. Ability to layout preferred. • TWIC preferred; DOT physical required., • Must be willing to travel, have appropriate tools and clean drivers abstract. NOTE: This position is located on Oahu, Hawaii. No relocation allowance available for this position. This is also a unionized position. You must be willing become a member of the IAMAW Local 1998 union. Salary based on collective bargaining agreement.

Job Description Lead Welder - $32/HR Full Family Medical HTM Contractors, Inc. | Honolulu, HI We are currently seeking a Lead Welder to become an integral part of our team! This person will use specialize equipment to weld and repair equipment, trucks, roll-off dumpsters, and fabricate various items. Pay & Schedule: • $32 per hour, • Monday to Friday, 7:00AM - 3:30PM, 30 minutes lunch (unpaid), • Weekly Pay Benefits: • 100% company-paid medical & dental (employee + family), • 10 paid holidays, • 160 hours PTO annually, • Birthday Pay (after 1 year), • 401(k) with 4% company match, • Profit sharing, • Metlife, • Life insurance (company paid) Company Culture: • Humble - We learn, not brag, • Teamwork - We've got each other's backs, • Accountability - We own what we say and do, • Solution-Driven - We fix problems, not complain about them, • GWC: We hire people who Get it, Want it, and have the Capacity to do it The Work: • Train and coordinate, • Estimate and take-offs for repairs and new builds, • Order materials, • Quality control, • Inventory, • Manufacture and fabricate various dumpsters and containers, • Repair, assemble, and install various dumpsters, containers, and equipment, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance, • MIG and Stick weld, • Assist in equipment maintenance and repairs Requirements: • Previous experience in welding, manufacturing, or other related fields, • Can manage and supervise 1-4 employees, • Estimating and take-offs for repair or building metal work (preferred), • Familiarity with welding tools, procedures, engineering blueprints, and schematics, • Ability to handle physical workload, • Valid Driver's License How to Apply: HTM Contractors. Inc. 130 Ohe St. Honolulu, HI 96813 (Monday to Friday, 7:00AM - 3:00PM) Online: (http://www.htmcontractors.com/) Email us your application to info@htmcontractors.comand let us know why you think you’d be a great fit for our team! If you're a welder that can lead, values teamwork, a positive work environment, you'll fit right in! Apply today!

Job Description Classification: Non-Exempt Hourly base pay: $25 We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred., • Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

We are currently looking to hire a full-time Welder/Tank Builder.

You will provide instructions for nuclear and non-nuclear guidance and direction to Welder shop personnel.

You will be identifying and associating metals, alloys and filler metal by color code and standard markings.You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.You will be using test methods for determining metals or alloys.You will be inspecting com

MIG, TIG, ARC Welder and Brazing Certifications. Recent Marine Welder/Mechanic shipboard experience on USN ships. Join HII's Mission Technologies division as a Marine Welder/Mechanic to serve on our SEMAT Hawaii team located in Pearl Harbor, HI.

You will serve as an Expert Welder leading a group to ensure work assignments are completed.

PLASTIC FABRICATOR LEADER (EXPERT).Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.You will serve as the principal Plastic Fabricator Expert for the crew and perform inspections of deficient coatings and work in process to ensure supervisor direction is followed, proper standards a

You will plan work assignments of personnel, equipment, facilitate scheduling qualifications, training, and develop specialized skills and procedures.You will schedule, coordinate and direct the accomplishment of work projects or operation in accordance with project needs and schedules.You will prov

Sysco Corporation - - Responsibilities: Operates electric forklift, which requires moving levers and pressing pedals to drive truck and control movement of lifting apparatus in the cooler, freezer, and dry spaces.Unloads/loads pallets of products using pallet jacks and forklifts.Stores and removes

You will serve as the principal Plastic Fabricator Expert for the crew and perform inspections of deficient coatings and work in process to ensure supervisor direction is followed, proper standards and practices are followed and rework is minimized.You will conduct random surveillance inspections of

Responsibilities: Operate and monitor production line(s) to ensure efficiency; Remove or shift materials and/or finished products to facilitate proper flow; Ensure package and product quality; Perform preventative maintenance; Operate all manufacturing equipment safely.

Job Description**: The Forklift Operator at DHL is responsible for safely operating forklifts to move, load, and unload heavy items and pallets within the warehouse.This role requires a strong understanding of warehouse operations, the ability to operate machinery safely, and a commitment to maintai

Facility Maintenance Technician.If you are highly motivated and enjoy collaborating with others, consider joining U-Haul as a Facility Maintenance Technician.In this role you will use your technical skills in concert with other technicians to accomplish complex projects, sharing and learning valuabl

You will be assisting journeyman Riggers in rigging up hoisting and pulling gear for lifting, moving, and positioning heavy loads.You will be assisting in fabricating, installing, and repairing standing and running rigging, wire and fiber rope items such as slings, towing bridles, nets, and other sh

Sales Assoc/Material Handler - Honolulu Main.Job Category: Thrift Stores - all positions Requisition Number: SALES012485.Part-Time Rate: $16 USD per hour.HON Honolulu Store 8 Honolulu, HI 96817, USA.The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

Performs work generally recognized as Storekeeper's work in storeroom areas located in maintenance bases and line operations including receiving, issuing, provisioning, checking, classifying, inventorying and storing of supplies, equipment, parts and Storekeeper, Material Handler, Handler, Operation

This is an operations position responsible for stocking received merchandise in the appropriate location, operating and maintaining equipment associated with warehouse activity and performing other related duties as required.Essential Skills and Knowledge.Ability to read a limited number of two and

Forklift Operator(s) with at least 1 year of forklift and warehouse experience to join our warehouse in Honolulu.To apply, submit your resume or visit us at 3005 Ualena Street, Honolulu, HI 96819.You can also call Mahela at (808) 459-9823 to possibly schedule an interview.Key Duties and Responsibili

Achieving our goals starts with supporting yours.Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network.Come join us to create what's next.Let's define tomorrow, together.At Un

As a Warehouse Material Handler, you will work with the team to ensure products get where they need to be, unload delivery vehicles, receive inventory, store product, and select and pack customer orders.As an employee-owned company, our employees are key to our success and are given opportunities to

Receives, examines and determines the condition and disposition of a wide variety of materials.Reviews disposal turn-in document accompanying material.Compares data against property assuring correct information and proper documentation (e.Visually inspects usable property for obvious signs of condit

Forklift/Cherry Picker Operator - Mon-Fri - 1st Shift.This position is responsible for retrieving, moving, and stacking merchandise.Loads, unloads, moves, stacks, and stages product using material handling equipment which may include use of forklifts.Picks and Packs orders throughout the warehouse.D

Apply Summary Company ABF Freight Location Honolulu, HI Workspace Service Center Pay Type Hourly, Full-Time Pay Range: $ 34.Amount listed is the base range and may differ by location.Job ID 29001 Share this job Facebook LinkedIn X WhatsApp Em Forklift Operator, Lift Operator, Driver, Forklift, City,

Global Workplace Solutions (GWS) Local is a hard services-led, tailored facility management solution.We self-perform hard services while partnering with best-in-class soft service providers to offer custom facility and project management solutions to our clients.We focus on empowering our team with

Benefits: Competitive salary Employee discounts Free uniforms Health insurance Opportunity for advancement Training & development * Wellness resources We Empower the Fighting Spirit in You! At UFC GYM, we raise the bar of what a "Big Gym" experience should be.We offer our members ever

Job Description Pickup and delivery of cargo to and from various destinations usually within proximity of the consolidation/distribution center.The loading and unloading of trailers utilizing the same techniques, technology and procedures as a dock worker.Actual duties and schedule may vary dependi

The Maintenance Technician II performs a wide variety of Maintenance Duties.This position is expected to be able to repair and maintain most items on a property without outside vendor assistance.Generally the Maintenance Technician II works at a pr Maintenance Technician, Technician, Maintenance, Ge

Explore a career at EAH Housing.Start or continue a career in real estate development and management with EAH Housing.We are looking for talented and skilled professionals as we expand our property portfolio throughout California and Hawai`i.As a mission-based nonprofit organization and industry lea

SUMMARY: At Aloha we have great people working together, with aloha, to create an extraordinary company.We seek to be the type of workplace where we have mutual respect and teamwork.We want our fellow employees to enjoy their jobs.We care about and for one another.We believe in doing the right thin

Our Maintenance Technician II assist us to ensure guestrooms, public areas, back‑of‑house spaces, and supporting amenities operate at peak performance while maintaining an environment reflective of luxury hospitality.The Maintenance Technician II performs independently assessed and moderately co

Explore a career at EAH Housing.Start or continue a career in real estate development and management with EAH Housing.We are looking for talented and skilled professionals as we expand our property portfolio throughout California and Hawai`i.As a mission-based nonprofit organization and industry lea

CLICK HERE to view our Maintenance Mechanic Job Preview Video Position is responsible for repairing and installing production/manufacturing equipment.Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications.Diagnoses equipment malfuncti

The Maintenance Technician II performs a wide variety of Maintenance Duties.This position is expected to be able to repair and maintain most items on a property without outside vendor assistance.Generally the Maintenance Technician II works at a pr Maintenance Technician, Technician, Maintenance, Ge

About the Role: As a CBRE Maintenance Technician, you will be responsible for maintaining small to medium-sized buildings, industrial systems, and equipment.This job is part of the Engineering and Technical Services job function.They are responsible for providing support, preventive maintenance,

The Maintenance Technician I performs necessary and minor repairs and preventative maintenance on rental units as they become vacant.May also assist in Painting of Interior Units, Office Areas, Laundry Room and Common Area Maintenance.RESPONSIBILIT Maintenance Technician, Technician, Maintenance, Pa

Explore a career at EAH Housing.Start or continue a career in real estate development and management with EAH Housing.We are looking for talented and skilled professionals as we expand our property portfolio throughout California and Hawai`i.As a mission-based nonprofit organization and industry lea

Independently performs skilled mechanical repair work in the adjustment, maintenance and repair of a wide variety of machinery and equipment such as water pumps, mechanical laundry equipment, and continuing work assignments in accordance with diagrams.Other duties include the inspection, repair and

You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed.You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and steam systems.You will mentor, train and instruct Pip

You will plan work schedules of subordinates and establish priorities on the basis of general work schedules methods and instructions from higher levels of supervision.You will make recommendations concerning training requirements, skills, and qualifications of personnel.You will instruct subordinat