Offres Construction & Trades à Henderson, NevadaCréer des alertes d'emploi

Responsibilities Spring Valley Hospital is a member of The Valley Health System, a network of acute care hospitals, physician practices and outpatient services that provide care for patients throughout Southern Nevada and nearby communities. Located in southwest Las Vegas, the 366-bed hospital offers emergency care, advanced cardiovascular and neurological surgeries and procedures, surgical services, women’s health, comprehensive maternity services, and a level III neonatal intensive care unit. Spring Valley Hospital is accredited by The Joint Commission (“TJC”) and has achieved TJC Advanced Certifications in Primary Heart Attack, Thrombectomy-Capable Stroke, and Hip and Knee Total Joint Replacement. Spring Valley Hospital has garnered recognition by US News & World Report for its outstanding achievements in several specialty programs. Additionally, the Advanced Wound Care and Hyperbaric Center is a distinguished Center of Excellence, providing the highest quality in care and patient satisfaction. The hospital has received numerous “Best of Las Vegas” awards, highlighting exceptional care and services for our community and patients. ER at Blue Diamond, an Extension of Spring Valley Medical Center, is a freestanding emergency department providing 24/7 emergency care to infants, children and adults. ER at Blue Diamond has achieved TJC Advanced Certifications in Acute Stroke Ready and Acute Heart Attack Ready. _ The Valley Health System (“VHS”) is an integrated system of care in Las Vegas and Southern Nevada comprised of acute care hospitals, physician practices and a variety of outpatient services. We focus on clearly defined goals designed to bring about exemplary patient care. Since 1979, we have been providing care to the more than two million people living in Southern Nevada and its surrounding communities. VHS is committed to training the next generation of healthcare providers including physicians, nurses, therapists and others in the allied health support services. The talent and dedication of the over 10,000 employees of VHS is what makes the company unique. VHS is owned and operated by a subsidiary of _ (“UHS”). About Universal Health Services One of the nation’s largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (UHS) has built an impressive record of achievement and performance. Growing steadily since its inception into an esteemed Fortune 500® corporation, annual revenues during 2025 were $17.4 billion. In 2026, UHS was again recognized as one of Fortune World’s Most Admired Companies™ and in 2025, was listed in Forbes ranking of America’s Largest Public Companies. Headquartered in King of Prussia, PA, UHS has approximately 101,500 employees and continues to grow through its subsidiaries. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located in 40U.S. states, Washington, D.C., Puerto Rico and the United Kingdom. For additional information visit www.uhs.com. Benefit Highlights: • A rewarding and engaging work environment, • Market competitive compensation and generous paid time off, • Time Off Benefit Opt Out Program in exchange for a 9% differential in pay, • Educational and tuition reimbursement up to $5,250 per year, • SoFi Student Loan Refinancing Program, • Employee Referral Bonus opportunities, • Career growth and development opportunities within the hospital and VHS, • Comprehensive insurance benefits package including Medical, Dental, Vision and Prescription Drug coverage, plus HSA savings account, • Additional insurance options such as life insurance, dependent life insurance, supplemental life insurance, accident insurance and critical illness insurance, • Voluntary benefits including Auto, Home, and Pet Insurance, • Employee Assistance Program (EAP) that offers resources for emotional health, everyday living, caregiving, personal well-being, legal and financial consultations and work-related issues available to all employees and their family members, • Ad

Job Description Triton Pools is looking for a hardworking, motivated Laborer to join our team. If hired, you’ll be an integral part of our crew, helping support crews on pool and landscaping project. Cleaning and preparing construction sites. Loading and unloading materials and equipment. Setting Forms Digging trenches, compacting earth and backfilling holes. Operating and tending machinery and heavy equipment. Following instructions from supervisors and implementing construction plans. Assisting skilled tradespeople in their duties.

Job Description Job Description The Assembly Technician works in a fast-paced manufacturing environment to build, integrate, and package server racks and related components. This hands-on role requires careful attention to detail, consistent use of hand tools, and strict adherence to assembly instructions to ensure high-quality output. You will collaborate closely with a team on a progressive assembly line to meet production goals while maintaining a clean, safe, and organized work area. Responsibilities • Open and unpack chassis and components to prepare for server assembly., • Install and replace brackets and labels according to detailed specifications and assembly instructions., • Integrate computer parts into chassis on a progressive assembly line, ensuring correct placement and secure installation., • Use small hand tools to install screws and small parts into chassis and related assemblies., • Safely handle switches and other components, affix them correctly, and apply appropriate labels in line with rack specifications., • Install rails to the correct elevation based on rack and customer specifications., • Package finished racks securely for shipment or storage, ensuring all components are protected and properly labeled., • Identify and scan labels to verify and confirm rack specifications and ensure accuracy against production requirements., • Assist with recycling materials and maintaining a clean, organized, and safe work area., • Follow detailed assembly instructions, processes, and procedures for product assembly operations., • Support production and operational needs by performing other related tasks as assigned, including general production and packaging activities. Work Environment This role is based in a manufacturing facility located near the Las Vegas Speedway. The position operates Monday through Friday, with baseline shift times of 7:00 AM–3:30 PM for day shift and 3:30 PM–12:00 AM for swing shift. Initial training for new hires will be conducted on day shift only, with training hours to be confirmed. The work involves standing for extended periods, working on ladders, lifting and moving up to 50 pounds, and using small hand tools in a progressive production line setting. The facility environment is active, fast-paced, and focused on technology manufacturing and warehouse operations. Parking may be located in a nearby building lot, with a shuttle service provided to the facility. Job Type & Location This is a Contract to Hire position based out of Las Vegas, NV. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Las Vegas,NV. Application Deadline This position is anticipated to close on Aug 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

MedPro Healthcare Staffing is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/20/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Labor & Delivery Registered Nurse for a travel assignment with one of our top healthcare clients. Requirements • Active RN License, • Degree from accredited nursing program, • BLS, ACLS, NRP, PALS AWHONN Certifications, • Eighteen months of recent experience in an Acute Care Labor and Delivery (L&D) setting, • Other requirements to be determined by our client facility Benefits • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching, • Unlimited Referral Bonuses up to $1,000 Duties Responsibilities Labor and Delivery Nurses (RN), also called perinatal nurses, provide care and support for women before, during and after delivery of the baby. They are responsible for making sure that the medical as well as the emotional needs of the patient are adequately met throughout the entire birthing process. • Labor and Delivery (LD) nurses provide care to women and their newborns during the antepartum, intrapartum, postpartum and neonatal stages., • Monitor vital signs of the mother and baby during birth., • Monitor patients for potential high risk problems., • Educate and support mothers and their families after giving birth. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Registered Nurse, RN, Labor & Delivery, Contract Nurse, Travel Nurse, Agency RN, Travel RN, Nursing, Contract, L&D, Labor and Delivery, LD *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx00000Su2dKEAR. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Labor & Delivery Registered Nurse Nursing: Labor and Delivery. About MedPro Healthcare Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits • Day 1 medical, dental, and vision benefits for you and your family, • Weekly pay and direct deposit, • Unlimited Referral Bonuses starting at $500, • On Staff Clinical Support Team, • Access to nationwide travel assignments, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matchingBenefits, • Weekly pay, • Referral bonus, • Employee assistance programs

\n Fusion Medical Staffing-Nursing is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements\n \n • Specialty: Labor and Delivery\n, • Discipline: RN\n, • Start Date: ASAP\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n Travel Labor and Delivery RN\n Company: Fusion Medical Staffing \n Location: Facility in Henderson, Nevada Job Details\n Fusion Medical Staffing is seeking a skilled Labor and Delivery RN for a 13-week travel assignment in Henderson, Nevada. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications:\n \n • One years’ recent experience as a Labor and Delivery RN\n, • Valid RN license in compliance with state regulations\n, • Current BLS certification (AHA/ARC)\n, • NRP (Neonatal Resuscitation Program) Certification\n Preferred Qualifications:\n \n, • AWHONN Fetal Monitoring Certification\n, • STABLE and ACLS Certifications (AHA / ARC)\n, • Other certifications and licenses may be required for this position\n Summary:\n The Labor and Delivery Registered Nurse provides comprehensive patient care in the obstetric setting. This role encompasses assessing maternal and fetal health, administering treatments, and collaborating with healthcare teams to ensure high-quality, patient-centered care during labor, delivery, and the immediate postpartum period. The position requires strong clinical skills in obstetrics, critical thinking abilities, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics. Essential Work Functions:\n \n • Communicate labor and delivery procedures to patients and families, providing reassurance and addressing concerns\n, • Administer prescribed medications and treatments in accordance with approved obstetric nursing techniques\n, • Prepare equipment and aid physician during labor, delivery, and examination of patients\n, • Provide immediate postpartum care, including assessment and stabilization of mother and newborn\n, • Educate patients and families on postpartum recovery, breastfeeding, and newborn care\n, • Collaborate with obstetricians, anesthesiologists, neonatologists, and other team members to deliver cohesive care\n, • Respond to obstetric emergencies, including preeclampsia, hemorrhage, or fetal distress, using evidence-based protocols\n, • Document patient care, assessments, and interventions accurately in the medical record\n, • Participate in quality improvement initiatives to enhance maternal and neonatal outcomes\n, • Perform fetal monitoring and interpret results\n, • Assist in cesarean sections and other obstetric procedures\n, • Comply with all regulatory standards, including hospital policies, state laws, and federal guidelines for obstetric nursing care\n, • Perform other duties as assigned within the scope of labor and delivery nursing\n Required Essential Skills:\n \n, • Critical thinking, service excellence, and good interpersonal communication skills\n, • The ability to read, write, and communicate in the English language\n, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills\n, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend\n, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism\n, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment\n, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail\n, • Sensory - Must possess visual acuity and ability to effectively communicate\n Benefits Include:\n \n, • Highly competitive pay for travel professionals\n, • Comprehensive medical, dental, and vision insurance with first day coverage\n, • Paid Time Off (PTO) after 1560 hours\n, • Life and Short-term disability offered\n, • 401(k) matching\n, • Aggressive Refer-a-friend Bonus Program\n, • 24/7 recruiter support\n, • Reimbursement for licensure and CEUs\n Why Choose Fusion?\n At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer:\n To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. \n Start your rewarding career as a Travel Labor and Delivery RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! \n *Fusion is an EOE/E-Verify Employer \n \n \n Fusion Medical Staffing - Nursing Job ID #1936745. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Nursing\n \n With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. \n As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. \n We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. \n \n Benefits\n \n • Benefits start day 1\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n, • Referral bonus\n, • Mileage reimbursement\n, • License and certification reimbursement\n, • Weekly pay\n, • Cancelation protection\n, • Guaranteed Hours\n, • Employee assistance programs\n, • Continuing Education\n \n

Medical Talent is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/20/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Join the Medical Talent Team! Join our dynamic team and embark on a rewarding journey with us! We are Joint Commission certified and known for our commitment to excellence and ethical practices in the industry. Offering some of the most competitive pay packages available, we prioritize the well-being and flexibility of our travelers! As a Traveler with Medical Talent, you`ll have the opportunity to work in diverse settings, expand your skill set, and make a difference in the lives of patients across various locations. We are seeking dedicated individuals who are passionate about delivering high-quality care and are adaptable to new environments. Requirements for submission: 1. Active license in the state(s) of practice, 2. Minimum of 1 year of recent experience in a clinical setting, 3. BLS/CPR certification (additional certifications may be required based on specialty), 4. Strong communication and interpersonal skills, 5. Ability to adapt to different healthcare settings and work collaboratively in a team environment, 6. Flexibility to travel and work varying shifts, including weekends and holidays, 7. Commitment to providing compassionate care and upholding ethical standards Being a Women-owned, Veteran-operated company, we take pride in supporting the individuals who work selflessly to help those in need. We will continue to make a difference by providing opportunities to advance careers and strengthen the healthcare workforce. As our team continues to grow, our mission will always stay the same: Strengthening the Future of Healthcare. Medical Talent Job ID #37225242. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:L&D,19:00:00-07:00:00 About Medical Talent About Medical Talent — Your Partner in Travel Healthcare At Medical Talent LLC, we’re not just another travel healthcare agency — we’re your career partner, your support system, and your biggest cheerleader on the road. As a woman-owned, veteran-operated, and Joint Commission-certified agency, we combine heart with professionalism to help travel nurses and allied healthcare professionals thrive in their careers while exploring the country. Why Travel With Us? Whether you’re taking your first travel assignment or you’re a seasoned pro, Medical Talent brings you more than a job — we bring you opportunity, purpose, and adventure. With positions available across all 50 states and specialties ranging from ICU to Radiology, we match you with assignments that fit your skills, goals, and lifestyle. A Supportive Team Backing Your Journey We know that the greatest travel assignment isn’t just about the location — it’s about the support you get along the way. That’s why every clinician at Medical Talent has a dedicated recruiter and credentialing expert by their side, guiding you from onboarding through contract completion and beyond. Our team works with personal attention, transparent communication, and genuine care — because you’re not just a number, you’re family. Your Success Is Our Mission At Medical Talent, we’re proud that: • 90% of our travel nurses extend their contracts — a testament to good matches and great experiences., • Our travelers consistently share stories of supportive recruiters, seamless onboarding, and fulfilling assignments. What Sets Us Apart • Personalized career guidance that meets you where you are — professionally and personally., • Nationwide opportunities so you can explore new cities, cultures, and experiences., • Credentialing support, benefits, and competitive pay packages designed for your success., • A culture built on teamwork, accountability, loyalty, and transparency — values that guide everything we do. Ready to Make Your Next Move? Traveling the country as a healthcare professional should be exhilarating — not overwhelming. At Medical Talent, we handle the logistics so you can focus on what matters most: caring for patients, growing your career, and living your best life on assignment. Employer Benefits Allow candidates to quickly see the benefits to choosing your organization. These benefits can appear in the job details for each posting as well as on your employer profile. This section is typically left blank when agencies are posting permanent positions only. You can choose to list a standard benefit or create a custom benefit. Standard benefits will show on your employer profile as well as on the job details page. Custom benefits will only show on your employer profile. Job Details Page Benefits • Dental benefits, • Medical benefits, • Guaranteed Hours, • Mileage reimbursement, • Discount program, • Vision benefits

American Traveler is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/06/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Assignment Overview • Shift: Nights, 3x12hrs, • Hours: 36 hrs/wk, • Start Date: Jul 6, 2026, • Length: 13 weeks, • Openings: 2Description American Traveler is seeking an experienced RN for a Labor & Delivery position at an acute care, Level 3 high-risk facility in Nevada, requiring active NV licensure and a minimum of 2 years of L&D experience. Details • Acute care hospital Labor & Delivery unit with 17 L&D beds, 2 OR suites for C-sections, 4 triage beds, and 16 postpartum beds, • High-volume unit averaging approximately 250 births per month, • Level 3 high-risk facility serving complex antepartum, laboring, and delivery patients, • Patient ratios follow AWHONN guidelines: 2:1 for normal laboring patients, 1:1 for high-risk labors, 4:1 for couplet care, and 2:1–4:1 for antepartum depending on acuity, • RNs are required to titrate drips including Magnesium Sulfate, Pitocin, Insulin, and Heparin, • Cerner used as the EMR and EFM system, • OB, neonatologist, and anesthesia are in-house 24/7, • Certified Surgical Techs and unit secretaries provide ancillary support, • No on-call or standby requirement, • Night shift, 12-hour shifts, every other weekend required, • Floating required to postpartum (Mother-Baby) and other units as needed; travelers are first to float, • Holiday coverage required on an as-needed basis, • 13-week contractRequirements, • Active NV RN license (Standard or Compact/NLC) required; pending licenses will not be accepted, • Current certifications required (no pending certifications accepted): BLS (AHA), ACLS (AHA), AWHONN Advanced Fetal Monitoring (AFM), and NRP, • Minimum 2 years of L&D experience required, • Proficiency with vaginal exams, internal monitor placement, and fetal monitor strip interpretation required, • Experience with high-risk laboring/delivery and antepartum patients required, • Ability to circulate and recover C-section patients independently, • Driver's license required for consideration, • Two professional references required: one supervisor from within the last 12 months worked and one peer or supervisor from within the last 3 years worked, including dates of employment and eligibility for rehire, • Candidates must reside at least 50 miles from the facility to be eligible for the travel pay rate, as determined by driver's license addressAdditional Information, • RNs manage the full scope of L&D care including laboring, delivery, antepartum, couplet care, and C-section circulation and recovery, • RNs are responsible for reading their own fetal monitor strips; no telemetry techs on unit — remote ICU monitoring is used when tele monitoring is needed, • Patients requiring mechanical ventilation are transferred to the ICU, • Scheduling is self-directed through the TEAM scheduling system, with the final schedule balanced by a nurse scheduling committee, • Orientation for travelers is 3 days, • Navy blue scrubs required; light blue OR scrubs are available for use in the OR, • Candidates may not have been directly employed (full-time, part-time, or PRN) by any CommonSpirit, CHI, or Dignity Health facility within the past year; candidates employed PRN through outside firms will be considered American Traveler Job ID #P-720620. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Travel RN - Labor & Delivery About American Traveler With over 25 years of experience, American Traveler has established a reputation for outstanding customer service. Our team ensures a smooth, worry-free experience for those starting on or expanding their travel nursing and allied careers. With thousands of travel nursing and allied jobs nationwide, our attentive and approachable recruiters find positions that align perfectly with your career aspirations and personal requirements. American Traveler offers exceptional benefits, including premium medical, dental, vision and life insurance beginning day one of your assignment, generous 401(k) match, substantial housing stipends, and more. Additionally, with 24/7 support and access to our in-house clinicians, you are assured confidence and comfort throughout your assignment. With our team behind you, you can relax and enjoy a rewarding travel career.

TRS Healthcare is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/20/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel TRS Healthcare Job ID #1479092. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: OB - Labor & Delivery Registered Nurse About TRS Healthcare TRS Healthcare has been a leader in the healthcare staffing industry for over 25 years, providing exceptional career opportunities for travel nurses and allied health professionals. An RN-founded, woman-owned company, TRS Healthcare has team members in all 50 states. We recruit and support registered nurses, licensed practical nurses, surgical technicians, respiratory therapists, imaging technologists, laboratory specialists, and other experienced nursing and allied healthcare professionals. We staff hundreds of healthcare facilities across the U.S. in urban, rural, and underserved areas, including multi-state hospital systems, critical access hospitals, rural community hospitals, long-term care facilities, trauma centers, standalone clinics, and more. Learn more about TRS Healthcare at trshealthcare.com.

Stability Healthcare is seeking a local contract nurse RN Labor and Delivery for a local contract nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Local Contract Stability Healthcare is looking for a L&D RN contract position in Henderson, NV. Labor and Delivery (L&D) Nurses care for women during labor and childbirth, monitoring the baby and the mother, coaching mothers and assisting doctors. As a L&D Nurse, you'll prepare women, and their families, for the stages of giving birth and help patients with breastfeeding after the baby is born. $600 travel bonus Day 1 health insurance with United Healthcare PTO plan -- start accruing on day 1, use during contract or cash out at the end! Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #L-852381. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: L&D About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

\n AHS Staffing is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements\n \n • Specialty: Labor and Delivery\n, • Discipline: RN\n, • Start Date: 07/20/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n \n AHS Staffing is looking for a Labor & Delivery Registered Nurse in Henderson, NV for a Long Term (Travel) position. \n \n This assignment is expected to last 13 weeks. Apply today to speak with a recruiter about the position! \n \n AHS Job ID #2413679. Posted job title: Registered Nurse Labor & Delivery About AHS Staffing\n \n At AHS Staffing, we are committed to providing a personalized, transparent, and rewarding experience. We go beyond the transactional nature of the industry by offering individualized job matching, clear communication, no-nonsense pay rates, and dedicated recruiter support 24/7. \n \n When you're on assignment with us, you'll get access to industry-leading benefits, including comprehensive medical coverage, 401(k) matching, competitive pay packages, licensure reimbursement, weekly pay, and more. Easily manage your day-to-day with our mobile app where you can view your assignment details, manage your compliance and licensing documents, submit timecards, and browse new jobs to land your next adventure. \n \n As a nationally recognized and award-winning agency, we understand the importance of providing a seamless experience from application to placement. Our top priority is matching you with assignments that align with both your personal and professional goals. Join us to experience working with an agency that truly prioritizes your success and well-being and see why thousands of healthcare professionals continue to trust us with their careers. \n \n \n

Anders Group is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/06/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Anders Group Job ID #1039699. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN (Registered Nurse) About Anders Group About Anders Group Why Anders? At Anders Group, we do things differently. As a Joint Commission–accredited healthcare staffing agency, we’re committed to one thing above all else—you. Our travelers aren’t just placements, they’re partners. That’s why we focus on delivering exceptional customer service, personalized support, and access to some of the best-paying travel opportunities nationwide. What You Can Expect From your very first assignment, you’ll have access to a comprehensive benefits package designed to support you both professionally and personally: • Day One Health Insurance (with buy-up options), • Dental & Vision Insurance, • Life Insurance, • 401(k) Retirement Plan, • Competitive, Premium Pay Packages, • Licensure & CEU Reimbursement, • Daily Per Diems & Travel Reimbursements, • Rental Car Allowances, • Continuing Education Resources, • Referral Bonuses, • And more The Anders Difference You’re committed to providing exceptional patient care and we’re committed to supporting you every step of the way. Founded in 2010 by experienced healthcare recruiters, Anders Group was built on a simple idea: people come before numbers. While many staffing firms focus on volume, we focus on relationships, quality placements, and your long-term success. By aligning your goals with the needs of top healthcare facilities across the country, we create assignments that truly fit, professionally and personally. Benefits • Medical benefits, • Dental benefits, • Vision benefits, • Life insurance, • 401k retirement plan, • License and certification reimbursement, • Continuing Education, • Referral bonus

Jackson Nurse Professionals is seeking a travel nurse RN Labor and Delivery for a travel nursing job in henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/06/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel At Jackson Nurse Professionals, we are dedicated to supporting travel nurses and helping you build a fulfilling nursing career. Whether you’re looking for your first or next travel nursing assignment, we specialize in connecting healthcare professionals with leading medical facilities. With a focus on personalized service and a wide range of opportunities, we make it easier than ever for nurses to find the right balance of adventure and professional growth. Qualifications: • 2 years of recent experience in area of specialty listed on job, • Current BLS required (certifications vary by location – job may require ACLS), • Valid license and/or certification in state of practice, • Valid Driver's License, • Background and drug screen Benefits: • Full Medical, Dental and Vision Insurance, • 401(k) with Employer Match, • 24/7/365 Support from your Recruiter available by text, phone, or email, • Referral Bonus Program: Give $200, Get $500 for every referral, • Same Day Immediate Pay Access, • Certification & Licensure Reimbursement Apply today to experience the Jackson Nurse Professionals difference! Jackson Nurse Professionals Job ID #2547150. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Jackson Nurse Professionals Filling critical needs in patient care, Jackson Nurse Professionals delivers cost-effective travel nurse staffing solutions to over 500 hospitals, outpatient clinics, and home health clients nationwide. Awarded Best of Staffing - Talent and Client 2024, and rated as a Top Workplace 2023 by the Orlando Sentinel, Jackson Nurse Professionals goes the extra mile to provide travel nurses the career they deserve, while providing clients with a large range of highly skilled nurses to fill short, long-term, and temporary assignments. As a member of Jackson Healthcare’s family of award-winning staffing companies, we’re part of a growing community that’s impacting 10 million patients nationwide. Join our mission to improve the delivery of patient care, and the lives of everyone we touch.

Stability Healthcare is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Stability Healthcare is looking for a L&D RN contract position in Henderson, NV. Labor and Delivery (L&D) Nurses care for women during labor and childbirth, monitoring the baby and the mother, coaching mothers and assisting doctors. As a L&D Nurse, you'll prepare women, and their families, for the stages of giving birth and help patients with breastfeeding after the baby is born. $600 travel bonus Day 1 health insurance with United Healthcare PTO plan -- start accruing on day 1, use during contract or cash out at the end! Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #852381. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: L&D About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Host Healthcare is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/06/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Host Healthcare Job ID #a1fVX000003UcSjYAK. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN - Labor and Delivery About Host Healthcare At Host Healthcare, we provide a truly comfortable experience as you explore your travel nursing, therapy, or allied career. We make your travel healthcare journey easy by taking care of all the details, so you don’t have to. We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what’s important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits • Referral bonus, • School loan reimbursement, • Vision benefits, • Wellness and fitness programs, • Company provided housing options, • License and certification reimbursement, • Life insurance, • Medical benefits, • Mileage reimbursement, • Pet insurance, • Discount program, • Employee assistance programs, • Guaranteed Hours, • Health savings account, • Holiday Pay, • 401k retirement plan, • Continuing Education, • Dental benefits

Trustaff is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 07/20/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel As a Labor and Delivery Nurse, you are responsible for providing care and support for women during labor and childbirth. You'll monitor mother and baby before, during, and after birth and assist throughout the process, including during delivery. L&D RNs use their special training and knowledge to help ensure the safety of patients both large and small. Trustaff Job ID #1661717. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Labor & Delivery About Trustaff Our nurse-first attitude has set us apart from other travel nursing agencies When you join the Trustaff family, you’re more than just a body filling a role—you're a vibrant individual with dreams and aspirations. As one of the nation's leading travel nursing companies, your recruiter will work with you one-on-one to guide your career and help you achieve your goals. • You decide when and where you want to work, • Enjoy industry-leading pay, benefits, and bonuses, • Experience new people and places, • Grow your clinical skills and expand your experience Travel nursing lets you take your professional career to the next level while maintaining your flexibility and freedom. At Trustaff, we put you first, so you never have to compromise your work or pay. We are proud to have one of the highest nurse retention rates in the country. Some of the other reasons people choose us include: • Priority access to thousands of travel nursing jobs, • Industry-leading pay, • Guaranteed weekly hours, • Experienced recruiters, • Comprehensive benefits, including medical, dental, and vision, • 401k with employer match, • Assistance with travel, compliance, and housing, • Great bonuses for completions, referring friends, and more Benefits • Weekly pay, • Guaranteed Hours, • Wellness and fitness programs, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits

\n Triage Staffing is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Henderson, Nevada. Job Description & Requirements\n \n • Specialty: Labor and Delivery\n, • Discipline: RN\n, • Start Date: 07/20/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n Travel Nursing: Labor and Delivery Henderson, NV \n Location: Henderson, NV \n Start Date: 7/20/2026 \n Shift Details: 12H Nights \n 36 hours per week \n Length: 13 WEEKS \n Apply for specific facility details.L&D RN \n \n Triage Staffing Job ID #GQGC3QYG. Posted job title: Nursing: Labor and Delivery About Triage Staffing\n \n At Triage, we prefer to be real. Real about expectations—both ours and yours. Real about how a decision you make today could affect your tomorrows. Real about how compensation actually works. Real about how great—or grating—your next supervisor may be. \n \n Being real allows everyone at Triage to be ready. Ready to serve you with real honesty. So if that gig near the ocean is really no day at the beach, or that third shift comes with a second-class rate, we tell you. So you can be ready, too. \n \n We staff all five major divisions of acute care—nursing, lab, radiology, cardiopulmonary and rehab therapy, offering: \n • Competitive, custom pay packages \n • One point of contact for both travelers and facilities (per division) \n • A reliable recruiter who's got your back throughout your entire assignment \n • In-house compliance and accounting specialists \n • A clinical liaison team available 24/7 to offer medical and professional support and career development \n • A mentoring program that is run and managed by actual clinicians—yeah, you read that right \n • And more (because of course there’s more) \n Are we the biggest? No. Are we the best? That’s rather subjective, but we’re trying to be. Will we work like hell to get you as close to your idea of heaven as possible? Yes. Yes, we will. \n Benefits: \n \n • Day One comprehensive, nationwide insurance plans for health, vision and dental and life—including a HSA option\n, • Day One 401(k) program with employer-matching contributions once eligible\n, • Facility cancelling protection—your time is money on and off-the-clock\n, • Guaranteed hours\n, • Weekly paychecks via direct deposit\n, • Earned vacation bonuses for time worked\n, • Paid holidays\n, • Employee assistance program (EAP)—your mental health is important, too\n, • Continuing education, certification and licensing reimbursement\n, • Workers comp—because accidents happen\n, • Top-rated professional liability insurance\n, • Company provided housing options\n, • Referral bonus—$750 in your pocket after they’ve completed a 13-week assignment\n \n \n

Responsibilities West Henderson Hospital is our seventh acute care hospital in The Valley Health System. It is located at the southwest corner of Raiders Parkway and St. Rose Parkway, near the Las Vegas Raiders' headquarters. The 150-bed hospital is equipped to care for patients with a variety of medical needs. Services available include emergency care, cardiac care, neurology care, surgery, gastroenterology and inpatient care for medical needs such as pneumonia. Hospital services include: • Emergency care, 24/7, • Advanced cardiac services, including cardiac catheterization labs, • Interventional radiology lab for diagnosis and treatment of other medical conditions, • Neurology care, • Surgical procedures for general surgery, orthopedics and weight loss, • Gastroenterology/endoscopy procedures, • Advanced imaging, • Laboratory services, • Respiratory services, • Inpatient nursing _ Benefit Highlights: • Challenging and rewarding work environment, • Comprehensive education and training center, • Competitive Compensation & Generous Paid Time Off, • Excellent Medical, Dental, Vision and Prescription Drug Plans, • 401(K) with company match and discounted stock plan, • Career opportunities within VHS and UHS Subsidies Job Description: Assists Cardiologist in performing Diagnostic and interventional procedures. Qualifications Shift: PER DIEM VARIED Education: Graduate from an approved school in Radiologic Technology or other related Bachelor's degree is required. Experience: A minimum of two years prior Cath Lab and/or Radiographer experience preferred. License/Certification: Current ARRT Licensure. Non-Radiologic Technologist must have active certification with Cardiovascular Credentialing International (CCI) as an (RCIS) Registered Cardiovascular Invasive Specialist or (RCES) Registered Cardiovascular Electrophysiology Specialist. Has or will obtain Nevada State fluorography license. Current certification in Interventional Angiography preferred. Must current BCLS certification. ACLS certification is preferred. Other: Must demonstrate commitment and adherence to Compliance Program and Code of Conduct through compliance with all policies and procedures, the Code of Conduct, attendance at required training and immediately reporting suspected compliance issue(s) to the Compliance Officer. EEO Statement All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws. We believe that diversity and inclusion among our teammates is critical to our success. Notice At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skillset and experience with the best possible career path at UHS and our subsidiaries. We take pride in creating a highly efficient and best in class candidate experience. During the recruitment process, no recruiter or employee will request financial or personal information (Social Security Number, credit card or bank information, etc.) from you via email. The recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc. If you are suspicious of a job posting or job-related email mentioning UHS or its subsidiaries, let us know by contacting us at: _ or 1-800-852-3449.

Responsibilities About Henderson Hospital Henderson Hospital is a member of The Valley Health System, a network of acute care and specialty hospitals that provide care for patients throughout Southern Nevada and nearby communities. Located in Henderson, NV, the acute care hospital offers emergency care, surgical services, including an outpatient surgery center, cardiovascular care, women’s health and maternity services, including a Level III neonatal intensive care unit, outpatient wound care and two freestanding emergency departments – the ER at Green Valley Ranch and the ER at Cadence. It is accredited as an Advanced Primary Heart Attack Center, an Advanced Primary Stroke Center and as a bronze-level Geriatric Emergency Department (GEDA). Henderson Hospital has also been honored by The Leapfrog Group as a Top General Hospital, a Top Teaching Hospital and earned the “A” Patient Safety Grade from the Leapfrog Group during its last 13 award cycles. In spring 2024, Henderson Hospital was also named one of the nation’s 100 Top Hospitals® by Fortune and Premier’s PINC AITM. The hospital opened in 2016. Benefit Highlights: • Challenging and rewarding work environment, • Comprehensive education and training center, • Competitive Compensation & Generous Paid Time Off, • Excellent Medical, Dental, Vision and Prescription Drug Plans, • 401(K) with company match and discounted stock plan, • Career opportunities within VHS and UHS Subsidies Henderson, Nevada: Incorporated in 1953, Henderson is Nevada’s second largest city with more than 302,000 residents. Our city is pleased to be recognized as the Second Safest City in America by Forbes magazine and three times named to MONEY magazine’s list of “Best Places to Live in America.” Our favorable tax structure, award-winning health care locations, accredited parks, police and fire departments all contribute to these accolades setting our community apart. While our city has grown to host a variety of metropolitan cultural arts and nationally recognized special events, we retain our small-town values and atmosphere. Annual events and local parades are still held in the Water Street District, our original “main street.” Our community also celebrates the grand openings of local businesses, accomplishments of our youth and contributions of our centenarians. With numerous parks, mixed-use shopping areas, master-planned communities and senior living neighborhoods, Henderson is a place where all can live, learn, work and play. Henderson is not just a place to live, but truly a place to call home. About Universal Health Services One of the nation’s largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (UHS) has built an impressive record of achievement and performance. Growing steadily since its inception into an esteemed Fortune 500® corporation, annual revenues during 2025 were $17.4 billion. In 2026, UHS was again recognized as one of Fortune World’s Most Admired Companies™ and in 2025, was listed in Forbes ranking of America’s Largest Public Companies. Headquartered in King of Prussia, PA, UHS has approximately 101,500 employees and continues to grow through its subsidiaries. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located in 40 U.S. states, Washington, D.C., Puerto Rico and the United Kingdom. For additional information visit _ Job Description: Assists Cardiologist in performing Diagnostic and interventional procedures. #LI-POST Qualifications Shift: FULL TIME VARIED Education: Graduate from an approved school in Radiologic Technology. . Experience: A minimum of two years prior Cath Lab and/or Radiographer experience preferred. License/Certification: Current ARRT Licensure. Non-Radiologic Technologist must have active certification with Cardiovascular Credentialing International (CCI) as an (RCIS) Registered Cardiovascular Invasive Specialist or (RCES) Registered Cardiovascular Electrophysiology Specialist. Has or will obtain Nevada State fluorography license. Current certification in Interventional Angiography preferred. Must current BCLS certification. ACLS certification is preferred. Other: Must demonstrate commitment and adherence to Compliance Program and Code of Conduct through compliance with all policies and procedures, the Code of Conduct, attendance at required training and immediately reporting suspected compliance issue(s) to the Compliance Officer. EEO Statement All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws. Avoid and Report Recruitment Scams We are aware of a scam whereby imposters are posing as Recruiters from UHS, and our subsidiary hospitals and facilities. Beware of anyone requesting financial or personal information. At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skill set and experience with the best possible career path at UHS and our subsidiaries. During the recruitment process, no recruiter or employee will request financial or personal information (e.g., Social Security Number, credit card or bank information, etc.) from you via email. Our recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc. If you suspect a fraudulent job posting or job-related email mentioning UHS or its subsidiaries, we encourage you to report such concerns to appropriate law enforcement. We encourage you to refer to legitimate UHS and UHS subsidiary career websites to verify job opportunities and not rely on unsolicited calls from recruiters.

Responsibilities About Henderson Hospital Henderson Hospital is a member of The Valley Health System, a network of acute care and specialty hospitals that provide care for patients throughout Southern Nevada and nearby communities. Located in Henderson, NV, the acute care hospital offers emergency care, surgical services, including an outpatient surgery center, cardiovascular care, women’s health and maternity services, including a Level III neonatal intensive care unit, outpatient wound care and two freestanding emergency departments – the ER at Green Valley Ranch and the ER at Cadence. It is accredited as an Advanced Primary Heart Attack Center, an Advanced Primary Stroke Center and as a bronze-level Geriatric Emergency Department (GEDA). Henderson Hospital has also been honored by The Leapfrog Group as a Top General Hospital, a Top Teaching Hospital and earned the “A” Patient Safety Grade from the Leapfrog Group during its last 13 award cycles. In spring 2024, Henderson Hospital was also named one of the nation’s 100 Top Hospitals® by Fortune and Premier’s PINC AITM. The hospital opened in 2016. Benefit Highlights: • Challenging and rewarding work environment, • Comprehensive education and training center, • Competitive Compensation & Generous Paid Time Off, • Excellent Medical, Dental, Vision and Prescription Drug Plans, • 401(K) with company match and discounted stock plan, • Career opportunities within VHS and UHS Subsidies Henderson, Nevada: Incorporated in 1953, Henderson is Nevada’s second largest city with more than 302,000 residents. Our city is pleased to be recognized as the Second Safest City in America by Forbes magazine and three times named to MONEY magazine’s list of “Best Places to Live in America.” Our favorable tax structure, award-winning health care locations, accredited parks, police and fire departments all contribute to these accolades setting our community apart. While our city has grown to host a variety of metropolitan cultural arts and nationally recognized special events, we retain our small-town values and atmosphere. Annual events and local parades are still held in the Water Street District, our original “main street.” Our community also celebrates the grand openings of local businesses, accomplishments of our youth and contributions of our centenarians. With numerous parks, mixed-use shopping areas, master-planned communities and senior living neighborhoods, Henderson is a place where all can live, learn, work and play. Henderson is not just a place to live, but truly a place to call home. About Universal Health Services One of the nation’s largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (UHS) has built an impressive record of achievement and performance. Growing steadily since its inception into an esteemed Fortune 500® corporation, annual revenues during 2025 were $17.4 billion. In 2026, UHS was again recognized as one of Fortune World’s Most Admired Companies™ and in 2025, was listed in Forbes ranking of America’s Largest Public Companies. Headquartered in King of Prussia, PA, UHS has approximately 101,500 employees and continues to grow through its subsidiaries. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located in 40 U.S. states, Washington, D.C., Puerto Rico and the United Kingdom. For additional information visit _ Job Description: Assists Cardiologist in performing Diagnostic and interventional procedures. Qualifications Shift: FULL TIME VARIED Education: Graduate from an approved school in Radiologic Technology. . Experience: A minimum of two years prior Cath Lab and/or Radiographer experience preferred. License/Certification: Current ARRT Licensure. Non-Radiologic Technologist must have active certification with Cardiovascular Credentialing International (CCI) as an (RCIS) Registered Cardiovascular Invasive Specialist or (RCES) Registered Cardiovascular Electrophysiology Specialist. Has or will obtain Nevada State fluorography license. Current certification in Interventional Angiography preferred. Must current BCLS certification. ACLS certification is preferred. Other: Must demonstrate commitment and adherence to Compliance Program and Code of Conduct through compliance with all policies and procedures, the Code of Conduct, attendance at required training and immediately reporting suspected compliance issue(s) to the Compliance Officer. EEO Statement All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws. Avoid and Report Recruitment Scams We are aware of a scam whereby imposters are posing as Recruiters from UHS, and our subsidiary hospitals and facilities. Beware of anyone requesting financial or personal information. At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skill set and experience with the best possible career path at UHS and our subsidiaries. During the recruitment process, no recruiter or employee will request financial or personal information (e.g., Social Security Number, credit card or bank information, etc.) from you via email. Our recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc. If you suspect a fraudulent job posting or job-related email mentioning UHS or its subsidiaries, we encourage you to report such concerns to appropriate law enforcement. We encourage you to refer to legitimate UHS and UHS subsidiary career websites to verify job opportunities and not rely on unsolicited calls from recruiters.

Job DescriptionPOSITION SUMMARY The HVAC Superintendent is a critical field leadership position and is foundational to project success and safety. This role is responsible for overseeing HVAC and mechanical construction activities in the field, providing leadership to field foremen and trade partners, and ensuring successful completion of HVAC work in alignment with project schedule, quality, safety, and budget goals. The HVAC Superintendent works closely with the Project Manager and other field leadership to support timely, coordinated, and high-quality completion of the construction process. This role is intended for an experienced mechanical field leader who can independently lead complex HVAC scopes with limited oversight with labor and material resources. RESPONSIBILITIES • Assist Estimating with bidding opportunities and preconstruction services for HVAC and mechanical scopes, • Assist the Project Manager in development of the Chart of Accounts for HVAC and mechanical work, • Assist in development of detailed CPM schedules with emphasis on HVAC procurement, installation, startup, and turnover milestones, • Assist in development of detailed scope of work for HVAC and mechanical systems, • Develop and maintain project site logistics plans related to HVAC equipment deliveries, material staging, crane picks, and installation sequencing, • Maintain a thorough understanding of contract documents, mechanical drawings, specifications, coordination drawings, and project requirements, • Manage McCarthy’s labor force and/or coordinate trade foremen to achieve optimum performance on HVAC scopes, • Review and understand material budgets and provide support for equipment purchases., • Monitor project costs, labor productivity, and installation performance; identify areas for improvement, • Provide leadership in the quality process for HVAC systems, including layout, installation, testing, balancing, startup, and commissioning readiness, • Provide leadership in safety and accident prevention programs for all HVAC and mechanical field activities, • Document daily construction activities related to HVAC progress, manpower, deliveries, issues, and inspections, • Chair or support weekly subcontractor and trade coordination meetings with focus on HVAC interfaces and sequencing, • Issue and maintain short-term schedules for HVAC work activities, • Assist Project Engineers in the shop drawing and submittal process for HVAC equipment, controls, and related materials, • Verify that as-built drawings and field markups for HVAC systems are kept current, • Implement all applicable safety programs and EEO/Affirmative Action programs, • Coordinate HVAC work with other trades including electrical, plumbing, fire protection, controls, and general trades to reduce conflicts and maintain production flow, • Lead field execution for ductwork, piping, equipment setting, controls coordination, startup activities, and final turnover of HVAC systems, • Support inspections, testing requirements, punch list completion, and owner turnover documentation for HVAC systems, • Help identify and resolve field issues related to constructability, installation sequence, manpower planning, and system completionQUALIFICATIONS, • 7–10+ years of applicable field leadership experience, • Significant experience in HVAC, mechanical, or MEP construction field operations, • Experience with relevant large-scale commercial or industrial projects, • Previous experience directing and coordinating HVAC/mechanical trades, • Strong knowledge of HVAC systems, construction principles, field practices, and sequencing requirements, • Experience leading installation of ductwork, piping, mechanical equipment, and related HVAC systems, • Self-perform construction management experience highly preferred, • Previous experience working closely with Project Management teams through successful completion of project phases, • Ability to read and interpret plans, specifications, shop drawings, and coordination documents, • Strong leadership, communication, and problem-solving skills, • Demonstrated commitment to safety, quality, and production performancePREFERRED, • Experience with self-perform mechanical or HVAC work, • Experience coordinating startup, testing, balancing, commissioning, and turnover processes, • Experience working in occupied facilities, complex phasing environments, or technically challenging mechanical projects, • Familiarity with field technology, scheduling tools, and construction documentation platforms, • Strong field presence and ability to lead crews and foremen effectively, • Ability to coordinate across multiple trades and maintain schedule commitments, • Consistent focus on safety, quality, planning, and accountability, • Ability to anticipate issues, solve problems in the field, and drive work to completionADDITIONAL, • Primarily focused in Arizona but travel outside of state may be required McCarthy is proud to be an equal opportunity employer, including disability and protected veteran status. NOTICE TO EXTERNAL SEARCH FIRMS: McCarthy’s Talent Acquisition Team is the only authorized representative permitted to engage with external search firms, staffing agencies, or other third-party recruiting partners. McCarthy maintains an Approved Agency List for recruiting partners, which is reviewed and updated annually. McCarthy will only consider submissions from agencies with a signed fee agreement in place for the current year. McCarthy does not accept unsolicited resumes, candidate submissions, or referrals from agencies that do not meet these requirements. If a candidate is submitted without an active agreement, McCarthy will have no obligation to pay any fees and reserves the right to contact, engage, interview, or hire such candidate(s) without any financial or other responsibility to the submitting agency. Unsolicited resumes, including those sent directly to hiring managers or other employees, will be considered the property of McCarthy.

Job DescriptionBenefits: • Competitive salary, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Training & development This position is responsible for supervising team members, coordinating daily tasks, maintaining quality standards, communicating with management, and making sure each job is completed safely, efficiently, and professionally. The ideal candidate has strong field experience, leadership skills, attention to detail, and the ability to keep crews productive while representing Hyarch well on every jobsite. Schedule may vary based on project needs. Day, evening, weekend, and overtime opportunities may be available. Requirements: • OSHA Certification, • Must have experience leading crews in construction cleaning, commercial cleaning, janitorial, labor, or related field work, • Must have strong leadership skills and the ability to keep team members organized, productive, and accountable, • Must be able to communicate clearly with crew members, supervisors, project managers, and clients, • Ability to work days, nights, weekends, or varying schedules as needed, • Must have reliable transportation, • Bilingual English/SpanishWhat We Offer:, • Competitive pay based on experience, • Supportive team environment, • Opportunity to grow with the company, • Hands-on work with a company that values reliability and professionalism

Job DescriptionDescription: National Firm Looking for Construction Defect Partners to Join our Nevada Team! Kahana Feld is an award-winning national law firm with over ten offices nationally and growing. We are seeking Construction Defect Partners that are looking for an opportunity to: • Become an Equity Partner at a fast-growing national firm that values teamwork, does not require a “book” of business to become an equity partner, and will help you market., • Work with great attorneys at a firm that prides itself on having a supportive culture., • Contribute to an inclusive environment fundamentally built on respect for all team members and where mentorship and a positive culture are a priority., • Develop your career and make a difference in the world. KF was recognized as a 2026 Top Workplace and awarded the Gold DEI Leadership Seal from the State Bar of California. We have a unique business model designed to support the success of all our attorneys, from day one! Building a law practice with a great culture is the purpose of the firm. Here are a few of the many things that make KF a great firm: • Excellent benefits (including recently added Paid Parental Leave)., • Flexible PTO., • Leadership positions are open to all attorneys in every office., • Realistic partnership and equity partnership track. All KF attorneys are eligible for partnership, both equity and non-equity. Promotion is based on your ability to do great work and fit our culture, and not on business development. REQUIREMENTS • Partner level Construction Defect experience, including the ability to run files and manage clients and carrier relationships., • Excellent references and a record of job stability., • Member of the Nevada bar in good standing. KF offers competitive base compensation from $200,000 - $280,000 plus discretionary and hours based bonuses. This organization participates in E-Verify. Equal Opportunity Employer Kahana Feld provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Requirements:

Job Description Summary We are currently representing a reputable general contractor with over 30 years of experience delivering commercial construction projects across California. Due to continued growth, they are seeking a detail-oriented and motivated Construction Estimator to support competitive bid development and preconstruction efforts. This is a great opportunity for someone looking to contribute to a high-performing team and advance their career in a dynamic, fast-paced environment. About the Role The Estimator will be responsible for preparing accurate and comprehensive estimates for commercial and retail ground-up or renovation projects. This role involves close collaboration with project management, field operations, and business development teams to ensure complete and competitive bids. Key Responsibilities Project Estimation & Bid Preparation Analyze construction drawings, specs, and RFPs to develop accurate project estimates Perform detailed quantity takeoffs for materials, labor, and equipment Conduct site visits to evaluate site conditions and logistical considerations Prepare and submit RFIs to clarify plans and resolve potential issues Develop and present detailed bid packages on tight deadlines Maintain all estimate-related documentation and historical pricing data Subcontractor & Vendor Management Build and maintain strong relationships with subcontractors and suppliers Solicit competitive bids and ensure scope coverage across all trades Review and evaluate subcontractor proposals for accuracy and alignment with project needs Distribute plans and manage bid invitations to ensure vendor participation Post-Award Project Support Assist with subcontractor selection, scope reviews, and procurement Support the transition from estimating to project management teams Help develop project budgets and participate in project buyouts Continuous Improvement & Collaboration Identify and suggest improvements to internal estimating processes Participate in client presentations and preconstruction strategy meetings Stay current with market trends, pricing, and construction methodologies Qualifications Education & Experience Minimum 2+ years of estimating experience in commercial or retail construction General contractor experience preferred Familiar with building systems, materials, and construction sequencing Skills & Technical Expertise Strong proficiency in Microsoft Excel and estimation software (PrimeBid, Timberline, or similar) Ability to read and interpret full construction drawing sets Strong written and verbal communication skills Detail-oriented and capable of managing multiple estimates under deadline Additional Requirements Strong team player with a proactive and adaptable mindset Willingness to travel locally for pre-bid walks and client meetings Compensation + Benefits Competitive base salary based on experience Medical, dental, and vision insurance 401(k) with company match Paid holidays, vacation, and sick leave Employer-paid dental plan and FSA options Opportunities for professional development and long-term career growth

Job Description Airframe and Powerplant Mechanic – Waco, TX About our Client: Our client provides avionics installations and upgrade cargo conversions, maintenance, structural modifications, and more. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Lead Technician is responsible to the Maintenance Supervisor and/or Project Manager. The Lead Technician must be appropriately certificated per Federal Aviation Administration (FAA) Code of Federal Regulations (14CFR) under Part 65. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Supervising his/her department., • Coordinating work priorities., • Assigning work as required to ensure an on-time delivery for the Aircraft Services Rockford repair station, and an airworthy aircraft, article/product for the customer., • Record all data on forms, reports and inspection tags, and escalate all irregularities in the standard practices that could cause injury to personnel or make the aircraft not airworthy., • Ensure all overhauls, checks and repairs are carried out in accordance with procedures as required in applicable manuals., • Ensure FAA approved data is used for all repairs and rework on aircraft and components., • Ensure a high standard of workmanship is maintained and inform the inspection supervisor of faulty equipment and poor housekeeping practices that could make an unsafe work area., • Signing or stamping completed serviceable tag attached to all parts and units and ensures tag is properly completed., • Signing applicable paperwork prepared for units overhauled, repaired or functionally tested, and ensuring tag is completed correctly and accurately., • Other duties as directed/assigned by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND/OR EXPERIENCE • High school diploma or General Education Degree (GED) required., • Must have a minimum of 8 years of related experience and/or training., • Must have an approved FAA Airframe and Powerplant certification (A&P)., • Heavy C,D experience required. BENEFITS • Health Insurance, • Dental insurance, • Vision insurance, • Company-paid Holidays, • Paid Time Off (PTO) PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. OTHER The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description Sheet Metal Mechanic – Waco, TX About our Client: Our client provides avionics installations and upgrades, cargo conversions, maintenance, structural modifications, and more. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Sheetmetal Technician is responsible for performing scheduled and unscheduled maintenance on 767’s & 737’s in a hangar environment with little to no supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Must have an extensive background in heavy structures: experience must include evaluating corrosion, nicks, dents, installation of doublers/triplers, skins, door frames, seat tracks and etc., • Highly proficient in cold working, flap peening, and jacking/shoring aircraft., • Must have an extensive background in heavy checks., • Highly proficient in using technical data and drawings to locate part numbers and accomplish repairs., • Ensure work performed adheres to high-quality standards., • Effectively follow directions from your lead EDUCATION AND/OR EXPERIENCE • High school diploma or general education degree GED required., • Must have a minimum of 5-year related experience and/or training. BENEFITS • Health Insurance, • Dental insurance, • Vision insurance, • Company-paid Holidays, • Paid Time Off (PTO) PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach, and move about the facility. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description Airframe and Powerplant Mechanic – Waco, TX About our Client: Our client provides avionics installations and upgrade cargo conversions, maintenance, structural modifications, and more. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Lead Technician is responsible to the Maintenance Supervisor and/or Project Manager. The Lead Technician must be appropriately certificated per Federal Aviation Administration (FAA) Code of Federal Regulations (14CFR) under Part 65. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Supervising his/her department., • Coordinating work priorities., • Assigning work as required to ensure an on-time delivery for the Aircraft Services Rockford repair station, and an airworthy aircraft, article/product for the customer., • Record all data on forms, reports and inspection tags, and escalate all irregularities in the standard practices that could cause injury to personnel or make the aircraft not airworthy., • Ensure all overhauls, checks and repairs are carried out in accordance with procedures as required in applicable manuals., • Ensure FAA approved data is used for all repairs and rework on aircraft and components., • Ensure a high standard of workmanship is maintained and inform the inspection supervisor of faulty equipment and poor housekeeping practices that could make an unsafe work area., • Signing or stamping completed serviceable tag attached to all parts and units and ensures tag is properly completed., • Signing applicable paperwork prepared for units overhauled, repaired or functionally tested, and ensuring tag is completed correctly and accurately., • Other duties as directed/assigned by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND/OR EXPERIENCE • High school diploma or General Education Degree (GED) required., • Must have a minimum of 8 years of related experience and/or training., • Must have an approved FAA Airframe and Powerplant certification (A&P)., • Heavy C,D experience required. BENEFITS • Health Insurance, • Dental insurance, • Vision insurance, • Company-paid Holidays, • Paid Time Off (PTO) PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. OTHER The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionDescriptionAt Horrocks, we believe the best work comes from companies with values, that our people are our greatest resource, and that we have a responsibility to the communities where we live and work. As an Inspector, you will play a critical role in ensuring that construction projects meet design specifications, safety standards, and quality expectations while fostering trust with clients, contractors, and the public What are the core responsibilities for the role? • Perform daily field inspections of construction projects to ensure compliance with plans, specifications, and applicable codes and regulations, • Monitor contractor activities for quality, safety, and adherence to project schedules, • Document and report inspection findings, including detailed daily reports, photos, and field notes, • Coordinate with project managers, engineers, and contractors to resolve issues and maintain project progress, • Verify materials, workmanship, and construction methods meet required standards, • Identify and communicate deficiencies or non-compliant work and track corrective actions, • Attend project meetings and provide updates on inspection activities and project status, • Ensure proper implementation of traffic control, environmental controls, and safety procedures, • Maintain accurate records of quantities, progress, and completed work for payment verification Qualifications, Skills, and Competencies: • High school diploma or equivalent required; associate or bachelor’s degree in construction management, engineering, or related field preferred, • Relevant inspection certifications (e.g., ATSSA TC Supervisor, WPCM, ACI Grade I (preferred)) or ability to obtain within a specified timeframe, • Previous experience in construction inspection, civil engineering, or related field preferred, • Strong knowledge of construction practices, materials, and safety standards, • Ability to read and interpret construction plans, specifications, and technical documents, • Excellent written and verbal communication skills, • Strong attention to detail and problem-solving abilities, • Ability to work independently and collaboratively in a team environment, • Proficiency with Microsoft Office and field reporting software · Valid driver’s license and ability to travel to project sites as neededThis position requires the operation of a company vehicle. All candidates must hold a valid driver’s license and will be subject to a Motor Vehicle Record (MVR) check. Employment is contingent upon meeting Horrocks' Fleet & Safety minimum requirements. Candidates will be asked to provide consent for the MVR check as part of the hiring process. Why would a candidate want this job? At Horrocks, you can expect a competitive base salary and award-winning benefits. Including, but not limited to: • Medical, dental, vision, life, and disability insurance, • Generous paid time off, • 401(k): 50% match of contribution up to 6%, • Professional development opportunities including in-house training, • Paid professional organization membership and professional licensureFor more information, visit our website at www.horrocks.com Equal Opportunity Employer including disability and protected veteran status

Job Description We're looking for Autobody Technicians with a minimum of 1 year of professional experience in wheel/rim repair to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Automotive Wheel Repair Technician, you'll be expected to repair deep wheel damage, use a wheel repair machine, and paint and clear-coat wheels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionFord Certified Diesel Service Technician Ford Country | Henderson, NV Join a Team Where People Stay and Careers Grow Ford Country is looking for a skilled Diesel Service Technician to join our team. This is an exciting opportunity to join a dealership backed by Gaudin Motor Company, a family-owned automotive organization with over 100 years of experience serving customers and building lasting relationships in the automotive industry. At Ford Country, we believe our people are the foundation of our success. We are proud of the culture we've built—a place where employees are valued, supported, and given the opportunity to grow. We are not a revolving-door dealership; we focus on building lasting relationships with our employees and creating an environment where talented technicians can build a career, not just find another job. Our success has been built on treating people the right way—our customers, our employees, and our community. When you join Ford Country, you become part of a company with a long history of stability, integrity, and commitment to its team members. Whether you've built your career with Ford or another manufacturer, we'd love to talk. If you've been open to different brands but are looking for a dealership that offers stability, strong factory support, advanced diesel technology, and a team-first environment, Ford Country is the place to continue your career. Have certifications from another manufacturer? That's okay! We value your experience and technical background. Certifications with brands such as GM, Ram, Cummins, International, Freightliner, or other manufacturers are a plus. Ford certification is preferred, but not required—we are looking for skilled technicians with the right attitude, work ethic, and desire to grow. What You'll Do • Diagnose, repair, and maintain medium- and heavy-duty diesel vehicles., • Perform quality repairs following manufacturer standards and safety procedures., • Inspect vehicles, identify concerns, and recommend appropriate repairs., • Complete repair orders accurately and efficiently., • Stay current with technical training, repair procedures, and manufacturer updates., • Maintain a clean, organized workspace., • Deliver quality workmanship and exceptional service to every customer.What We're Looking For, • Ford Certification preferred, but not required., • Manufacturer certifications from other brands are welcome., • Previous dealership or fleet experience preferred., • At least 1 year of diesel, fleet, or dealership experience., • High school diploma or equivalent., • ASE Certification preferred., • Own tools required., • Strong work ethic, positive attitude, and commitment to teamwork., • A desire to continue learning and grow with our organization.Why Ford Country?, • Be part of a dealership backed by Gaudin Motor Company, with over 100 years of automotive experience, • Family-owned and operated with a strong team culture, • A stable workplace where employees build long-term careers, • Competitive pay, • Health, medical, and dental benefits, • 401(k), • Paid vacation and PTO, • Employee vehicle purchase program, • Flexible scheduling, • Ford factory training and career development opportunities, • A team that values respect, accountability, and doing things the right way If you're tired of bouncing from dealership to dealership and are looking for a place where your skills are appreciated, your voice is heard, and your career can grow, we'd like to meet you. Join the Ford Country family and become part of a company built on more than a century of automotive experience, trust, and commitment. Apply today! Ford Country is an Equal Opportunity Employer and considers all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected status.

Job Description About the Role: The Tower Foreman plays a critical leadership role in overseeing the construction, maintenance, and safety compliance of tower structures within the construction industry. This position is responsible for managing on-site teams, coordinating project schedules, and ensuring that all work is performed to the highest standards of quality and safety. The Tower Foreman acts as the primary point of contact between field crews and corporate management, facilitating clear communication and efficient workflow. Success in this role results in the timely and safe completion of tower projects that meet client specifications and regulatory requirements. Ultimately, the Tower Foreman ensures that all operational objectives are met while fostering a culture of safety, teamwork, and continuous improvement. Minimum Qualifications: • Minimum of 5 years of experience in tower construction or related field., • Proven leadership experience managing construction crews., • Strong knowledge of tower erection, maintenance procedures, and safety regulations., • Valid driver’s license and ability to travel to various job sites as required. Preferred Qualifications: • Certification in tower climbing and rescue techniques., • OSHA 30-hour Construction Safety certification., • Experience with project management software and reporting tools., • Technical training or certification in telecommunications or structural engineering., • First aid and CPR certification. Responsibilities: • Supervise and lead tower construction and maintenance crews to ensure efficient and safe project execution., • Coordinate daily work schedules, assign tasks, and monitor progress to meet project deadlines., • Conduct regular safety inspections and enforce compliance with OSHA and company safety standards., • Collaborate with project managers, engineers, and other stakeholders to resolve technical and logistical issues., • Maintain accurate records of work performed, materials used, and incidents reported on site., • Train and mentor crew members to enhance skills, safety awareness, and productivity., • Ensure proper use and maintenance of tools, equipment, and personal protective gear., • Respond promptly to emergencies or unexpected challenges to minimize downtime and risk. Skills: The Tower Foreman utilizes strong leadership and communication skills daily to effectively manage and motivate diverse teams, ensuring clarity in task assignments and safety protocols. Technical expertise in tower construction and maintenance allows the Foreman to oversee complex operations and troubleshoot issues efficiently. Organizational skills are essential for coordinating schedules, managing resources, and maintaining detailed documentation to support project tracking and compliance. Safety management skills are critical to enforce rigorous standards and conduct training that minimizes workplace hazards. Additionally, proficiency with project management tools enhances the Foreman’s ability to monitor progress, report status, and collaborate with stakeholders to achieve project goals.

Job DescriptionCommercial Concrete Finisher:Concrete Finishers are responsible for smoothing and finishing poured concrete floors, slabs, walls, tilt-walls, elevated slabs, and site work (curbs, sidewalks, loading docks, etc.) to specified quality using hand tools or power tools to include floats, trowels, and screeds. Key Responsibilities: • Smooths and finishes surfaces of poured concrete floors, walls, slabs, elevated slabs, and site work., • Spread concrete to a specified depth and workable consistency., • Levels, smooths, and shapes surfaces of freshly poured concrete, using straight edge, float, machine trowels, and/or power screed (Riders, Laser screeds)., • Finishes using power trowel; rub and patch concrete to meet quality standards., • Loads, transports, and unloads tools, equipment, and supplies required for each project., • Perform minor maintenance and cleaning activities with tools and equipment., • Responsible for observing and complying with all safety policies and guidelines., • Perform other duties as assigned. Requirements: • 3 years of concrete finishing experience., • Commercial construction experience preferred.

Job Description Company TRAK Machine Tools (TMT) is a manufacturer of TRAK CNC machines and Proto TRAK CNC controls. Our headquarters is located in Rancho Dominguez, CA, just south of Los Angeles with a second facility located in Henderson, NV. We have established direct and distributor sales/service organizations in America and Europe, with sales expanding in other markets internationally. Reports To Operations Supervisor / Manager Job Overview The Machine Assembler, Level I is responsible for assembling and inspecting tool room machines, installing and inspecting all options and finishing or “greening” the machine. This is further detailed in the Task Outline. The individual will accomplish this by using hand and power tools along with various inspection and calibration equipment. All work will be completed per company specifications. The individual may also temporarily work in other areas as needed by the company. Requirements • Observes all safety protocols, • Keeps work area clean and organized, • Ensures all paperwork is present and complete, • Performs work to a high workmanship standard, • Utilizes good time management skills, • Proper tool selection and uses tools in the correct manner, • Works in both warehouse locations to have a basic understanding of how a machine kit is generated and how a machine is palletized, wrapped and shipped, • Assembles machines in a consistent manner according to work instructions, • Communicate well with others, • Collaborates with management, leads and higher-level assemblers Qualifications • 2-3 years performing mechanical work in automotive, aerospace or similar fields, • Good knowledge and familiarity with basic hand tools, • Basic knowledge and use of a tablet, • Impeccable attention to detail, • Ability to work well with a team DISCLAIMER The above description is not intended to be interpreted as an exhaustive list of skills, qualifications, and duties for this role. Southwestern Industries, Inc. – TRAK Machine Tools retains the right to change or assign other duties to this position. Southwestern Industries, Inc. – TRAK Machine Tools is an Equal Opportunity and Affirmative Action Employer. All applicants will receive equal consideration for employment without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law. Southwestern Industries, Inc. – TRAK Machine Tools is committed to providing access and reasonable accommodation in its employment opportunities in accordance with the Americans with Disabilities Act and other applicable laws.

Job Description Job Description JOB TITLE: Heavy Equipment Mechanic (Journeyman Level) REPORTS TO: General Manager /Service Advisor HOURS AND PAY SCHEDULE: Normal hours are 7:00 AM to 3:30 PM Monday through Friday. This position is non-exempt. COMPANY OVERVIEW: Haaker Equipment Company employs roughly 150 employees between seven different branches in La Verne, Santee, Las Vegas, Phoenix, Colton, Centeral Valley and Hayward. We take great pride in providing the best products and service in our industry. Haaker Equipment Company empowers our employees to make the right decisions in order to take care of our customers. JOB SUMMARY: This position must have general mechanical experience. Requires individual to work under the supervision of the General Manager and Service Advisor. Individual will receive work assignments and schedule on a daily basis. Perform assigned tasks per schedule and process all required documentation. Must be able to communicate effectively with customers and internal staff, regarding repairs. TYPICAL RESPONSIBILITIES: • Perform repairs on customer equipment as directed by the General Manager or Service Advisor, in indoor or outdoor applications and in dirty or foul environments., • Perform Preventative Maintenance on customer’s equipment., • Perform required maintenance on Company owned equipment., • Report and track time worked on jobs accurately., • Complete repair orders as outlined with efficiency and accuracy., • Diagnose and perform repairs., • Ability to determine the proper tools and equipment needed for a job., • Operate, monitor and control equipment or systems to diagnose and perform repairs on equipment, • Inspect equipment to determine if additional work is required., • Ability to remain stationary, position or traverse equipment to properly diagnose repairs. Also be able to position parts up to 50 pounds into place for proper installation., • Save and tag parts per factory warranty guidelines if a warranty repair., • Create parts list for required repairs., • Read and understand electrical, hydraulic and pneumatic schematics and drawings., • Notify Service Manager and Service Writer if additional work is required or items listed on service order are not needed., • Notify Service Manager and Service Writer if repairs cannot be completed within time frame promised., • Supervise work of apprentice technicians as assigned., • Maintain 90% billable hours., • Must be able to perform basic fabrication jobs such as cutting, measuring, torching, welding, etc., • Keep shop and/or service truck work space clean., • Keep up to date with factory training, tech tips and service bulletins., • Follow all company safety policies and procedures, report any safety issues and accidents to manager. QUALIFICATIONS: • 2-5 years of mechanical experience working on hydraulic, pneumatic and electrical systems, or heavy equipment maintenance experience., • Ability to diagnose and troubleshoot equipment systems., • Ability to identify component failures, worn or damaged parts, and must be able to perform quality repairs., • Ability to work well with customers as well as internal staff., • Ability to obtain a class B license within 120 days after hire date., • Must have and maintain a clean driving record., • Ability to lift and carry up to 50lbs., • Must be able to stand, stoop, squat and sit for long periods of time as repair requires., • Must be able to work overhead for extended periods of time., • Must be able to push and/or pull with up to 25lbs of pressure., • Ability to grasp and hold tools with both hands as repair requires. Preferred Skills/Abilities: • 5+ years of mechanical experience working on hydraulic, pneumatic and electrical systems, or heavy equipment maintenance experience., • Prior experience working on product lines that we offer. At Haaker Equipment Company, our goal is to be a diverse workforce that is representative, at all job levels, of the citizens we serve. Haaker is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protect under federal, state, or local law. Haaker Equipment Company will reasonably accommodate qualified individuals with a disability so that they can perform the essential function of a job unless doing so causes a direct threat to the individuals or others in the workplace and the threat cannot be eliminated by reasonable accommodation and/or if the accommodation creates an undue hardship to Haaker Equipment Company. Contact the HR Manager with any questions or requests for accommodation. Company DescriptionHeavy Equipment Dealership with seven branches across three states (California, Nevada and Arizona).Heavy Equipment Dealership with seven branches across three states (California, Nevada and Arizona).

Job Description Sheet Metal Mechanic – Waco, TX About our Client: Our client provides avionics installations and upgrades, cargo conversions, maintenance, structural modifications, and more. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Sheetmetal Technician is responsible for performing scheduled and unscheduled maintenance on 767’s & 737’s in a hangar environment with little to no supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Must have an extensive background in heavy structures: experience must include evaluating corrosion, nicks, dents, installation of doublers/triplers, skins, door frames, seat tracks and etc., • Highly proficient in cold working, flap peening, and jacking/shoring aircraft., • Must have an extensive background in heavy checks., • Highly proficient in using technical data and drawings to locate part numbers and accomplish repairs., • Ensure work performed adheres to high-quality standards., • Effectively follow directions from your lead EDUCATION AND/OR EXPERIENCE • High school diploma or general education degree GED required., • Must have a minimum of 5-year related experience and/or training. BENEFITS • Health Insurance, • Dental insurance, • Vision insurance, • Company-paid Holidays, • Paid Time Off (PTO) PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach, and move about the facility. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description The Underground Utilities Estimator is responsible for preparing accurate and competitive cost estimates for underground utility construction projects. This role requires a strong understanding of excavation, utility installation, project specifications, and construction methods. The ideal candidate is detail-oriented, organized, and capable of managing multiple bids while working closely with operations, project management, vendors, and clients. Key Responsibilities • Review project plans, specifications, and bid documents., • Perform quantity takeoffs for underground wet and dry utility systems., • Solicit and evaluate subcontractor and supplier quotations., • Develop detailed cost estimates, budgets, and bid proposals., • Analyze labor, equipment, materials, production rates, and project risks., • Attend pre-bid meetings and conduct site visits as needed., • Identify value engineering opportunities and cost-saving alternatives., • Coordinate with project managers and field operations during bid preparation., • Maintain estimating databases, historical costs, and vendor relationships., • Prepare bid packages and ensure timely submission., • Assist with project handoff following contract award. Qualifications • 5+ years of estimating experience in underground utility construction., • Strong knowledge of:, • Wet utilities (water, sewer, storm drain), • Dry utilities (electrical, telecommunications, gas), • Concrete experience is ideal, • Trenching and shoring, • Ability to read and interpret civil plans, specifications, and utility drawings., • Experience with estimating software such as HCSS HeavyBid, B2W, Agtek, Bid2Win, or similar., • Proficiency in Microsoft Excel, Word, and Outlook., • Strong analytical, mathematical, and organizational skills., • Excellent communication and negotiation abilities., • Valid driver's license. Preferred Qualifications • Civil Engineering or Construction Management degree (preferred but not required)., • Experience with public works and private development projects., • Knowledge of PlanSwift, AutoCAD, Trimble Business Center, or Civil 3D., • Familiarity with DOT, municipal, and utility company standards. What We Offer • Competitive salary based on experience, • Performance bonuses, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid vacation and holidays, • Professional development opportunities, • Stable workload with opportunities for career advancement Ideal Candidate The successful candidate is a self-motivated professional who thrives in a fast-paced environment, understands underground utility construction from the ground up, and takes pride in producing accurate, competitive estimates that contribute to company growth. Apply Today If you have a passion for underground utility construction and enjoy turning project plans into winning bids, we'd like to hear from you. Submit your resume along with a brief summary of your estimating experience. Company DescriptionPlatinum Contracting of Nevada, LLC, is a full service general contracting firm serving the Southern Nevada market. We specialize in the installation of underground utilities, demolition, grading, and excavating. Utilizing our Las Vegas roots, we are able to provide an innovative product built with our vast knowledge of the community and expert craftmanship in a wide range of unique services and projects. Visit our website at platinumnv.com to gain more insight on what our company offers.Platinum Contracting of Nevada, LLC, is a full service general contracting firm serving the Southern Nevada market. We specialize in the installation of underground utilities, demolition, grading, and excavating. Utilizing our Las Vegas roots, we are able to provide an innovative product built with our vast knowledge of the community and expert craftmanship in a wide range of unique services and projects. Visit our website at platinumnv.com to gain more insight on what our company offers.

Job DescriptionAbout ANA: Join a recognized industry leader - Alliance North America was proudly named a 2025 Top Workplace in the Manufacturing Industry, an honor based entirely on feedback from our own employees about our culture, values, and workplace experience. Alliance North America was established in 2017 and is proud to be the sole North American supplier of AIRMAN Power Generators, AIRMAN Air Compressors, and ANA’s patented EBOSS® Hybrid Energy System and Smart load bank system. Our commitment to our customers is to Make their World Easier, by answering the phone, understanding their needs, and taking ownership to provide them solutions. With a large parts inventory and more than 90% of all orders shipping within 24 hours, you never have to worry about spare parts. We help keep your fleet in top condition with our world class Support Department, who are always ready to help and be a resource by providing training on our equipment. ANA is headquartered in Henderson, Nevada, with locations in Cypress, California, and Spartanburg, South Carolina. ANA is growing and scaling, and we are seeking a Mechanical Design Engineer II in an onsite position in Henderson, Nevada. In this role, you will focus on the mid-level mechanical design, prototyping layout, and component integration within our hybrid energy systems and power equipment. This role requires a dedicated design approach to ensure our products meet or exceed quality standards while bridging the gap between initial concepts and scalable production. You will utilize your advanced CAD skills to lead product and accessory design for the equipment rental industry, managing projects with moderate independence while collaborating closely across the engineering team to optimize manufacturing processes. The position is fully onsite, and the work schedule is weekdays from 8:00 AM-5:00 PM. This role reports to the Senior Mechanical Design Engineer. Role & Responsibilities: • Conceptual Design & Engineering: Develop innovative engineering design concepts, structural layouts, and component integrations for ANA's hybrid energy systems, battery storage, and generators., • Enclosure & Trailer Design: Design and optimize protective enclosures, sheet metal structures, and trailer configurations, ensuring proper mechanical spacing and structural integrity., • Advanced CAD Modeling: Utilize 2D/3D CAD software (SolidWorks and AutoCAD) to create highly accurate 3D models and detailed 2D production drawings to support manufacturing and accessory design., • Electrical Subsystem Integration: Interface with electrical layouts to ensure proper mechanical clearance, mounting, and routing considerations for internal electrical components and power subsystems., • Design for Manufacturability (DFM): Evaluate product designs for manufacturability, partnering closely with manufacturing and process engineers to identify strategic areas for structural improvement, waste reduction, and production floor cost efficiency., • Prototype Development: Collaborate directly with the production floor to physically assemble, build, modify, and refine physical prototype units, test fixtures, and mechanical enclosures based on design iterations., • Documentation & Technical Writing: Generate and maintain detailed engineering documentation, including Bills of Materials (BOMs), standard operating procedures (SOPs), assembly work instructions, and user manuals., • Cross-Functional Collaboration: Partner with design engineers, manufacturing teams, and product managers to define clear product specifications and implement design updates. Qualifications:, • Education: Bachelor's degree in Mechanical Engineering or a related field; Master's degree is a plus., • Experience: 3 to 5 years of experience in product design, mechanical engineering, CAD modeling, or a similar development role., • Industry Domain: Experience working in design or engineering capacities within industries such as power generation, battery storage, solar/renewable energy, compressors, or engines., • Manufacturing Knowledge: Strong knowledge of manufacturing processes, including machining, assembly, sheet metal fabrication, and quality control principles., • CAD & Engineering Tools: Advanced proficiency in 2D/3D CAD software (SolidWorks and AutoCAD) and associated engineering platforms., • Data Management: Proven experience working within Product Data Management (PDM) environments (e.g., SolidWorks PDM) to control file revisions and manage engineering workflows., • Documentation & Systems: Strong technical writing skills and high attention to detail for engineering documentation. Proficiency in utilizing engineering and enterprise software platforms, including Microsoft SharePoint and Microsoft Business Central ERP., • Innovation & Tools: Familiarity with generative AI tools (e.g., ChatGPT, Gemini, Copilot) to assist with technical problem-solving, design automation, data analysis, and workflow optimization., • Professional Skills: Excellent problem-solving, analytical skills, and strong project management capabilities, aligning with our core value of Root Cause Problem Solving. Ability to work well in a team environment and independently when required, while successfully managing multiple design projects simultaneously. ANA’s Core Values:, • Root Cause Problem Solving, • Be Creative with Solutions, • Build open and honest relationships, • Build a positive team and family spirit, • Be inclusive, • Look for better ways, • Be humble, • UrgencyBenefits & Perks:, • Competitive pay, • 401k with company contribution, • Medical, Dental, & Vision, • Life Insurance, • Voluntary Accident Insurance, • Voluntary Critical Illness Insurance, • Employee Assistance Program, • Employee Appreciation ProgramsThe salary range for this role is $85,000 – $95,000 per year, which serves as a guide for pay decisions. Final compensation will be determined by a number of factors, such as the candidate's qualifications, experience, and skills, as well as pay equity considerations.You must be based in the United States and authorized to work in the U.S. without employer sponsorship. Please be advised that ANA does not provide employment-based visa sponsorship for this position at this time. ANA is proud to be an Equal Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Job Description We are seeking an experienced and dependable In-House Fueling Equipment & UST Maintenance Technician to support the maintenance, repair, and operation of fueling systems across our locations. The ideal candidate will have hands-on experience with fuel dispensers, underground storage tanks (UST), fuel system components, and electrical troubleshooting. Responsibilities • Diagnose, repair, and maintain fueling dispensers and related equipment, • Perform maintenance and troubleshooting of underground storage tank (UST) systems, • Inspect and service pumps, nozzles, leak detectors, submersible pumps, and fuel control systems, • Troubleshoot electrical issues related to fueling equipment and controls, • Conduct preventive maintenance and ensure equipment uptime, • Coordinate and maintain compliance with environmental and safety regulations, • Maintain maintenance logs and repair documentation, • Respond to emergency service calls as needed Requirements Qualifications • Experience working on fuel dispensers and UST systems required, • Strong electrical troubleshooting and repair skills, • Knowledge of fueling system components and diagnostics, • Experience in convenience store or gas station operations is a plus, • Familiarity with EPA, state, and local compliance requirements preferred, • Ability to read wiring diagrams and technical manuals, • Self-motivated with strong problem-solving abilities, • Valid driver’s license required Preferred Skills • Experience with Gilbarco, Wayne, Veeder-Root, or similar systems, • Knowledge of POS integration and fuel monitoring systems, • Basic plumbing and general maintenance experience is a plus, • UST certifications or related technical certifications preferred Pay for this role is targeted at $30-$40 per hour Benefits • Medical, Dental, Vision and Life Insurance, • 401K Plan, • Paid Time Off

Job DescriptionDescription: VADATECH PROVIDES EQUAL EMPLOYMENT OPPORTUNITIES (EEO) TO ALL EMPLOYEES AND APPLICANTS FOR EMPLOYMENT WITHOUT REGARD TO RACE, COLOR, RELIGION, CREED, GENDER, SEX, SEXUAL ORIENTATION, GENDER IDENTITY, GENDER EXPRESSION, NATIONAL ORIGIN, AGE, DISABILITY, GENETIC INFORMATION, MARITAL STATUS, SOCIO-ECONOMIC STATUS, AMNESTY, STATUS AS A COVERED VETERAN AND ANY OTHER CLASS PROTECTED BY APPLICABLE FEDERAL, STATE AND LOCAL LAWS. THE COMPANY COMPLIES WITH APPLICABLE STATE AND LOCAL LAWS GOVERNING NONDISCRIMINATION IN EMPLOYMENT IN EVERY LOCATION IN WHICH THE COMPANY HAS FACILITIES. THIS POLICY APPLIES TO ALL TERMS AND CONDITIONS OF EMPLOYMENT, INCLUDING HIRING, PLACEMENT, PROMOTION, TERMINATION, LAYOFF, RECALL, TRANSFER, LEAVES OF ABSENCE, COMPENSATION, AND TRAINING. VADATECH IS AN EQUAL OPPORTUNITY EMPLOYER M/F/DISABILITY/VET SUMMARY: VadaTech, Inc. is a world leader in the design and manufacture of embedded computing solutions. Due to continued growth, we are seeking candidates for the Mechanical Drafter position. In this role, the Mechanical Drafter operates a Computer-Aided Design (CAD) system, including creating, updating, and modifying complex electromechanical devices and systems. RESPONSIBILITIES: REASONABLE ACCOMMODATIONS MAY BE MADE TO ENABLE INDIVIDUALS WITH DISABILITIES TO PERFORM THE ESSENTIAL FUNCTIONS. • To ensure the quality of the technical product documentation by ensuring that all drawings are produced in accordance with both published national /international standards and company design standards in a timely fashion within the program release schedule., • Contribute to the identification of any shortcomings and recommend /propose solutions., • Check and approve engineering drawings from the points of view of technical completeness, clarity, conformance with standards, dimensional accuracy, and the correct specification of material and processes., • Check and approve tolerance stack analysis for technical completeness and correctness., • Assist the departmental manager with promoting and developing a generally higher level of engineering drawing, GD&T, and tolerance stack analysis across the team through one-to-one mentoring and group training activities where required., • Provide oversight of detailed, accurate, and comprehensive technical drawings using SolidWorks., • Collaborate with engineers to translate designs into precise 3D models and 2D drawings., • Participate in reviews, identify and correct design and documentation errors, and provide valuable insights for product improvement., • Maintain and update product documentation, ensuring compliance with industry standards., • Proficiently use PDM systems and ECOs for document management and version control., • Assist in the development of bills of materials (BOMs) and assembly instructions.Requirements: QUALIFICATIONS AND EDUCATION REQUIREMENTS: • Proven experience working with SolidWorks, with a strong proficiency in creating complex assemblies and drawings, with a minimum of 5 years preparing drawings to ASME Y14.100 (or equivalent)., • Exceptional detail-oriented and examination-oriented skills., • Ability to work effectively in a fast-paced, deadline-driven environment., • Skilled in the application and understanding of GD&T (ASME Y14.5M-1994), preferably at least GDTP Technologist level or broadly equivalent combination of training and experience., • Experience with ‘Worst Case’ stack-up tolerance analysis, including the impact of GD&T., • Proficient in using Product Data Management (PDM) systems for document control and standard office productivity tools, • Excellent communication and collaboration abilities to explain drawing changes, standards requirements, and represent documentation requirements at meetings, etc., • Familiarity with common manufacturing processes, preferably with knowledge of DFMA principles., • Internal candidates should have a proven track record of complying with relevant company policies and procedures. Environment: • Indoors/Engineering Labs/Manufacturing Floor Physical Demands: • Ability to sit and stand for extended periods of time., • Required to wear Personal Protective Equipment (PPE) when working on the manufacturing floor., • Ability to handle and lift objects weighing at least 25 lbs.

Job Description TCI RENTAL AND LEASING – If you are a Diesel Mechanic with an expert touch and attention to detail, WE WANT YOU! We are looking for Diesel Mechanics with 4+ years' Experience - $35.54 to $39.54 -depending on skills and experience Shift - Monday through Friday Level Up Has Launched! New Career Growth Program for Diesel Technicians We're excited to introduce our Level Up Program, our new initiative designed to help diesel technicians take their careers to the next level. Through personalized career path planning, skills development, and support for training and certifications, Level Up empowers our team to grow, succeed, and thrive—right here at TCI. Apply now and we can schedule your in-person interview and show you around our shop while getting to know each other! https://careers.tcitransportation.com/ Minimum Requirements 4 to 6+ years Diesel Engine Repair Must possess a valid driver's license Class A or B preferred but not required Self-motivated & Leadership skills Must be available for On Call Rotation Benefits: Weekly Paychecks / Direct Deposit Available Safety Incentives up to $300 Quarterly upon meeting requirements Medical, Dental & Vision Coverage / Critical Illness Insurance Employer Paid Life and AD&D Insurance 401K with Company Match Holiday Pay Employee Discount Programs Uniforms provided Yearly Boot Allowance About Us: We are a family-owned company doing business since 1978. We are dedicated and committed to safety, each other, and our customers. Our team is positive and passionate and come to work each day with a "Can Do" attitude. We strive to be creative problem solvers who bring innovative thinking in all our work. Being ethical, transparent, and accountable has helped shape our team and how we do business. We are looking for more people that match our core values to join our team.

Job DescriptionGeneral Description: • The primary function of the Concrete Estimator is to provide accurate bid proposals and scope analysis for potential construction projects., • Additional responsibilities include quote review, project management, and material purchasing., • Prepare pricing estimates on new projects and estimate prices on change orders on existing contracts., • Exercise good judgment and experience in working with purchasing, concrete labor, equipment and transportation costs to arrive at full cost estimate with appropriate profit margins to achieve Company's goals., • Ultimately, your role will be to utilize your skills to develop new business for the company. Responsibilities: • Functions as Lead Estimator., • Read and understand job bid instructions, detailed specifications, prepare a "take off" of materials included in the job., • Estimate all necessary labor, materials, buyout items, equipment costs (including crane costs) to prepare a through price estimate., • Review proposals, specifications, drawing, attend pre-bid meetings, etc…to determine scope of work and develop quantity take-offs., • Incorporates safety in the means and methods decision making during the estimating phase., • Develops and maintains relationships with suppliers and subcontractors., • Develops and maintains relationships with owners, general contractors., • Responsible for buyout process with Project Manager. Requirements: • At least 2 years estimating successful large commercial self-perform concrete projects., • Must possess the knowledge and field experience associated with cast in place concrete construction, concrete footings, and foundations., • Good verbal and written communication skills for dealing with contractors, suppliers, purchasing, sales and others., • Ability to read and interpret technical and legal documents., • Knowledge of related structural products including joist, deck, stairs, rails, anchor rods, etc., • Ability to assemble scope of work with required information in including inclusions, exclusions and qualifications., • Knowledge of terminology customarily used in construction and knowledge of use of computer and estimating software packages., • Microsoft software applications including Excel, Word, Access, PowerPoint and Outlook., • Experience using B2W software is a plus., • Creative and results-oriented, with a strong sense of urgency., • Successful internships or Project Engineering experience is a plus., • Highly entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Are you an experienced automotive technician ready to take your career to the next level? Midas is hiring driven professionals who want to be rewarded for their skill, efficiency, and work ethic. This isnt just another shop job its a real career with uncapped earning potential, full benefits, and growth opportunities. If you're ready to join a trusted name in automotive care and be part of a high-performance team, we want to hear from you. What We Offer: • Top Industry Pay We pay for performance. Competitive Commission structure with uncapped earning potential, • Weekly Bonuses & Incentives The more you produce, the more you earn, • Full Benefits Package Medical, dental, vision, 401(k), paid time off, • Busy, Efficient Shop High car count and loyal customers keep our bays full, • Real Advancement Opportunities Move up to Master Tech, Shop Lead, or Trainer or even Management within MidasWhat Were Looking For:, • ASE Certification (or equivalent experience), • Strong diagnostic and R&R (Remove and Replace) skills, • Reliable, self-motivated, and focused on quality workmanship, • Team player who thrives in a fast-paced environment, • Driven and Motivated individualsTired of being capped, stuck, or overlooked? Come to Midas where performance drives pay, and your future is wide open.

Job Description21.90-27.03 We are looking for a WELDER to join our HENDERSON, NEVADA plant. As a cage welder with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work and become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees. Why apply? • Competitive pay, • Medical and prescription drug coverage, • Dental and vision coverage, • Health savings and flexible spending account, • 401(k) with company match, • Life insurance and disability coverage, • Paid vacation, • Paid holidays, • Growth & Development opportunities, • Employee Discounts, • Mental Health through our Employee Assistance Program, • Wellness benefits including low-cost gym memberships About the Role: Responsibilities: • Welding and Fabrication: Operate welding equipment to assemble and weld cages, ensuring they meet required specifications and quality standards., • Reading Blueprints: Interpret and work from engineering drawings and blueprints to accurately assemble cages according to design specifications., • Material Handling: Select and prepare materials for welding, including cutting, fitting, and positioning components, • Welding Techniques: Utilize various welding techniques, such as MIG, TIG, or stick welding, to join metal components securely., • Quality Control: Inspect finished products to ensure they meet quality and safety standards, making any necessary adjustments or repairs., • Safety Compliance: Adhere to all safety protocols and guidelines to prevent workplace accidents and injuries, • Equipment Maintenance: Maintain and perform routine checks on welding equipment to ensure it functions properly., • Collaboration: Work in coordination with other team members to achieve production goals and timelines., • Record Keeping: Maintain records of completed work and any necessary documentation for quality control and production tracking., • Continuous Improvement: Suggest and implement process improvements to enhance productivity and product quality., • Any other miscellaneous tasks assigned by management at any given time and in any given area About You We Require: • Great work ethic and impeccable attendance., • Able to read and understand work orders and complex instructions., • Familiarity with hand tools and power tools., • Ability to work outdoors or in open air environment., • Preferred – Experience working in a manufacturing environment., • Preferred – Experience operating a forklift, especially an industrial forklift., • Must be able to lift and move objects up to 50 pounds frequently. Over 50 pounds, a forklift or crane will be used. Must be able to push or pull cart with 80 pounds of force. Must be able to climb stairs and ladders. Must be able to step up 20 inches. About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? · The process is simple. Click on the “apply” button to get started. #INJM

Job Description Job Title: Heavy Equipment Mechanic Pay: $40-45/hr This is a long term position based in Las Vegas. NV Established Solar Tracking installation company is seeking a Heavy Equipment Mechanics to repair heavy duty construction equipment. Job Description This role requires a candidate with experience as a heavy equipment mechanic, specifically in troubleshooting hydraulic machinery used for post and foundation preparations. The successful candidate must possess a valid driver's license and be able to provide proof upon hiring. Responsibilities • Troubleshoot and repair hydraulic machinery used for post pounding and drilling., • Perform electrical troubleshooting and circuit diagnosis., • Conduct hydraulic, pneumatic, and valve repairs., • Repair heavy equipment, • Diagnose and troubleshoot PLC systems. Job Qualifications: • 5 years as a Heavy Equipment Mechanic, • Previous experience troubleshooting skills in the areas of hydraulics, diesel engines and electrical systems, • Experience with controls (encoders, CANBUS, linear transducers, PLC, etc.), • Heavy equipment diagnostics (CAT, Cummins), • Welding and fabrication, • Excellent judgement and able to make responsible decisions, • Ability to work independently without constant direction, • Effective verbal and written communication skills. Should be able to adapt communication style to suit different audiences both internally and externally, • This position requires the successful candidate to have a valid driver's license and provide proof that s/he has a valid driver's license upon being hired. Key words: Diesel mechanic, heavy equipment mechanic, field mechanic, PD10, Hydraulics repairs, post pounders. drill rigs, drilling platforms. Hydraulic. Job Type & Location This is a Contract to Hire position based out of Las Vegas, NV. Pay and Benefits The pay range for this position is $40.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Las Vegas,NV. Application Deadline This position is anticipated to close on Jul 28, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCompany Description EchoPark Automotive is one of the fastest growing brands within the automotive industry. We are building a business based on doing things the right way. From the way we treat our guests, take pride in our work and share opportunities for our employees to grow as we grow. We are proud of what we're doing here and would love to tell you about our opportunities! Job Description Automotive Technicians for our dealership in Henderson, NV. Eligible candidates will receive a Sign-On Bonus of $3500.00! Please ask for more details. Also, 60K-70K + Bonus | No Sundays | AC Shop What You’ll Do: The Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. Our technicians inspect and repair our selection of preowned vehicles (8 years and newer, most under 80,000 miles). • Lube, filter, flushes, • Brake and tire repair, • Suspension and alignments, • Vehicle inspection, • No heavy-line or body work What We’re Looking For: • At least 6 months of previous Automotive Mechanic experience, or Auto Tech School certification, • Own a set of tools, • Valid driver’s license and a good driving record, • High school diploma or the equivalent, • Strong work ethic and thrive in fast paced environment, • Ability to follow directions and willingness to learn, • Respect for teammates and positive outlook What We Offer: • $45,000-$70,000 annual salary with bonus potential, • Our technicians are paid a salary, based on experience, not commission, not flat rate, and guaranteed hours, • Schedule that provides work/life balance, • Health, Dental, and Vision Insurance, • 401K – 100% match up to 4%, • Paid vacation, • Tuition reimbursement, • Access to leadership and personal development programs, • Company-provided uniforms and toolboxes Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Your next opportunity awaits! Mercedes-Benz of Henderson, a leading automotive dealership, is seeking a skilled and experienced Automotive Technician to join our team. The Automotive Technician is responsible for diagnosing, repairing and maintaining vehicles to ensure optimal performance and customer satisfaction. Automotive Technicians – we've got your covered! We offer free health insurance for you and your family, paid training, competitive hourly rates and a busy shop – maximize your productivity and maximize your earnings. We offer free health insurance for you and your family All training paid by Fletcher Jones to further your career Competitive hourly rates Ability to flag over 250 hours per month Supportive Shop Foreman and Team Leaders Benefits • Health insurance, • Dental insurance, • Vision insurance, • Paid time off, • 401(k), • 401(k) matching, • Flexible spending account, • Professional development assistance, • Life insurance, • Employee assistance plan, • Disability insurance Qualifications • Valid driver's license and clean driving record., • Previous experience as a Mercedes-Benz automotive technician strongly preferred Responsibilities • Utilize diagnostic tools and equipment to accurately diagnose mechanical and electrical malfunction of vehicles and perform repairs., • Accurately document record of all repairs, services and maintenance performed on vehicles in accordance with dealership and manufacturer standards., • Collaborate with service team to ensure efficient workflow and timely completion of repairs., • Perform maintenance and repairs with efficiency and in accordance with dealership and manufacturer standards. At Mercedes-Benz of Henderson, we attract, nurture, and retain the most talented people in the industry by providing the highest quality work environment where productivity, creativity, and personal and professional growth can flourish. We believe our team sits behind the wheel of the Fletcher Jones brand that drives our company toward success. We are an Equal Opportunity Employer

Job Description Job Summary: The Senior Plumbing Technician/ Drain Technician is responsible for meeting with customers to identify and diagnose specific drain/sewer piping concerns, getting the line(s) flowing and advising customers on next steps to include a Camera Technician and a camera main inspection. Drain Technicians produce quality, on-time inspections and clearing installation of plumbing related jobs to meet the requirements of our customer agreement and in accordance with local plumbing codes. Key Responsibilities: • Safety of self as well as safety of employer vehicles, equipment, and customer homes., • Works independently with little supervision in the completion of assignments, • Performs drain clearing at customer homes and provides overall assessment of known systems, • Provides guidance to homeowners on next steps in the process to permanently repair sewer lines, • Works efficiently and keeps job areas clean and organized., • Works closely with Camera Technician, Dispatch and Sewer Supervisor in providing customer solutions., • Properly represents the company when in the public and demonstrates company ethics., • Establishes and maintains customer oriented focus., • Communicates politely and effectively with, and in front of, customers., • Works as part of a team with managers and other departments., • Participate and attend department meetings., • Demonstrates knowledge of sewer systems, repair and installation using standard tools, machinery, and equipment., • Demonstrates writing skills with a focus on technical accuracy, writing quality and clarity are also required., • Uses, applies and monitors appropriate safety practices and procedures and reports violations to Sewer Supervisor Qualifications & Requirements: • Thorough knowledge of all sewer systems, • Ability to work independently and manage time efficiently, • Strong communication skills, verbal and written, • Able to assist in evaluating assigned install team personnel on job performance and provide field coaching and as necessary., • Follows and demonstrates company policies with team members, • Diagnostic and analytical skills, • Works well under pressure, • Demonstrates effective communication skills with customers, install team members, dispatch, and management Benefits: • Competitive pay., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and holidays., • Life insurance., • Ongoing training and career advancement., • Company vehicle (for qualifying positions). Work Environment: Works in field environments across residential job sites, climbing ladders and navigating uneven surfaces. Regularly works in confined spaces and moves materials up to 50 pounds. Operates hand and power tools and vehicles. Must be able to see, hear, and exchange accurate information with customers and team members. Regular exposure to outdoor weather, noise, and dust. Reasonable accommodations may be made to perform essential functions. #FTP Pay Range$150,000—$250,000 USD About Fetch-A-Tech: At Fetch-A-Tech, our mission is to provide all residents of Las Vegas and the neighboring areas with the highest standards and quality of plumbing and indoor comfort. As plumbing & AC experts, we do this by offering top notch services and products, as well as by educating our customers and protecting our integrity at all times. We offer a competitive pay structure and ongoing training and support for all employees, ensuring our ability to serve our customers in the best way we can, and we will certainly stop at nothing until our customers are fully satisfied with our services. We are an equal-opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Privacy Policy

Job DescriptionSalary: Job Title: Service Technician Porsche Looking for the last job you will ever have. Join the best of the best Porsche Henderson Family Owned and Operated Since 1922. Summary Functions as a skilled technician who can diagnose and repair all areas. Minimum of two years of Dealership experience. In addition to a competitive compensation package, we also provide world-class benefits for Full Time Team Members, which include: • Medical, Dental, and Vision Insurance, • Basic Life Insurance (Company Paid), • Voluntary Life Insurance, • 401 (k) Retirement Savings Plan with Company Match, • Paid Vacation, • Paid Holidays, • Weekly Pay, • Technician Christmas Bonus Program, • Factory Training minimum of once a year. Essential Duties • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses the cause of any malfunction and performs repair., • Communicate with the parts department to obtain needed parts., • Saves and tags parts of the job if under warranty or if requested by the customer., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Communicate immediately with the service advisor if additional work is needed, if the work outlined is not needed, or if repairs cannot be completed within the promised time., • Documents all work performed and recommended on the repair order., • Road tests vehicles when required to ensure the vehicle is repaired., • Maintain all online training and certifications as Porsche outlined., • Keeps abreast of Porsche technical bulletins in the PPN Portal., • Reports shop or special tool defects or malfunctions to Shop Foremen., • Ensures that customers' cars are kept cleanNotifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle., • Keeps shop work area neat and clean., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment safely., • Reports any safety issues immediately to management., • Other tasks as assigned. Qualifications To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education and/or Experience • Associate's degree (A.A.) or equivalent from a two-year College or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. Language Skills • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees of the organization., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to effectively present information and respond to questions from managers, clients, customers, and the general public. Mathematical Skills • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability • Applying common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Ability to solve practical problems and deal with various concrete variables in situations where only limited standardization exists., • Ability to interpret various instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations Manufacturer Training State of Nevada Emission Certification 1G or 2G Valid Driver's License With Clean Driving Record

Job DescriptionBenefits: • Bonus based on performance, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Now Hiring: Automotive General Service Technicians at Midas Top Pay, Uncapped Earning Potential, Career Growth Are you an experienced automotive service technician ready to take your career to the next level? Midas is hiring driven professionals who want to be rewarded for their skill, efficiency, and work ethic. This isnt just another shop job its a real career with uncapped earning potential, full benefits, and growth opportunities. If you're ready to join a trusted name in automotive care and be part of a high-performance team, we want to hear from you. What We Offer: • Top Industry Pay We pay for performance. Competitive Commission structure with uncapped earning potential, • Weekly Bonuses & Incentives The more you produce, the more you earn, • Full Benefits Package Medical, dental, vision, 401(k), paid time off, • Busy, Efficient Shop High car count and loyal customers keep our bays full, • Real Advancement Opportunities Move up to Master Tech, Shop Lead, or Trainer or even Management within MidasWhat Were Looking For:, • General Service and R&R (Remove and Replace) skills, • Reliable, self-motivated, and focused on quality workmanship, • Team player who thrives in a fast-paced environment, • Driven and Motivated individualsTired of being capped, stuck, or overlooked? Come to Midas where performance drives pay, and your future is wide open.