Trabajos technician en Whitley BayCrear alertas

MTrecs new career opportunityOur market-leading clients are now looking to recruit a Panel Beater on a temporary- permanent basis.The Job youll doPanel Repair: Straighten dents, shape metal, and repair damaged body panels using specialised tools.Component Replacement: Remove and replace severely damaged panels, interior trim, and exterior parts.Welding & Bonding: Execute precision MIG/TIG welding, spot welding, and structural panel bonding.Preparation for Paint: Sand, fill, prime, and smooth surfaces to guarantee a seamless finish for the paint team.Alignment Checks: Use jigs and measuring devices to check chassis alignment and ensure structural integrity.Quality Control: Self-inspect all completed repairs to eliminate defects and maintain strict cosmetic standards.Documentation: Accurately log completed tasks and report additional vehicle damage found during teardown.About YouExperience: Proven history as a Panel Technician within a busy automotive workshop or Bodyshop.Qualifications: NVQ Level 3 or ATA qualification in Vehicle Body Repair is highly preferred.Certifications: Active Welding or Panel Bonding certifications are strong advantages.Driving Licence: A valid, clean UK driving licence is typically required to manoeuvre auction stock.The Rewards and the BenefitsCompetitive pay.Opportunity for the role to be made permanent.TPBN1_UKTJ

MTrec’s new career opportunity \n Our client are specilaists in their industry sector, they are looking to recruit a Calibration and Test Technician on a permanent basis. \n The Job you’ll do \n\n • Responsible for the assembly, repair, calibration and packing of all products in line with specification.\n, • Assembling products as directed and in line with approved drawings.\n, • Ensuring all products are built to specification and meet the quality standards defined.\n, • Ability to understand simple wiring diagrams.\n, • Repairing products in line with company procedures.\n, • Calibrating products in line with company procedures.\n, • Packing products in line with company procedures.\n, • Ensuring all Health and Safety guidelines are adhered to.\n, • Undertaking both internal and external training in line with the company skills matrix requirements.\n, • Ensuring all equipment and tooling used for the work are fit for purpose.\n, • Ensuring that the MRP system (Odoo) is accurately updated.\n, • Provide input into internal audits and contribute to continuous improvement. This to include identifying errors or technical problems that may arise.\n, • Ensuring that all workspaces are kept tidy and manageable.\n, • Ability to support other departments on the shop floor when needed.\n\n About You \n\n • Educated to GCSE/NVQ level 2 and above.\n, • Ability to interpret technical documentation/drawings.\n, • Excellent attention to detail and ability to maintain a high standard of work.\n, • PC literate.\n, • Ability to communicate clearly and effectively.\n, • Soldering experience – through-hole, basic SMD, wire-to-wire.\n, • Experience of working in a small to medium-sized company.\n, • Experience working within a regulated industry.\n, • Experience in operating equipment in a machine shop i.e., Lathe, Pillar drills, Bench grinder etc.\n, • Experience of PCB testing & fault finding an advantage.\n, • Experience in drilling/tapping of metal work.\n, • Minimum of 5 years in a Mechanical/Engineering/Production environment.\n, • Working Hours -Monday to Thursday 8.00am - 5.00pm. Friday- 8.00am - 12.45pm.\n\n The Rewards and the Benefits \n\n • Bonus scheme.\n, • Company pension.\n, • Free On-site parking.\n, • Employee Assistance Programme (EAP).\n

MTrecs new career opportunityOur client are specilaists in their industry sector, they are looking to recruit a Calibration and Test Technician on a permanent basis.The Job youll doResponsible for the assembly, repair, calibration and packing of all products in line with specification.Assembling products as directed and in line with approved drawings.Ensuring all products are built to specification and meet the quality standards defined.Ability to understand simple wiring diagrams.Repairing products in line with company procedures.Calibrating products in line with company procedures.Packing products in line with company procedures.Ensuring all Health and Safety guidelines are adhered to.Undertaking both internal and external training in line with the company skills matrix requirements.Ensuring all equipment and tooling used for the work are fit for purpose.Ensuring that the MRP system (Odoo) is accurately updated.Provide input into internal audits and contribute to continuous improvement. This to include identifying errors or technical problems that may arise.Ensuring that all workspaces are kept tidy and manageable.Ability to support other departments on the shop floor when needed.About YouEducated to GCSE/NVQ level 2 and above.Ability to interpret technical documentation/drawings.Excellent attention to detail and ability to maintain a high standard of work.PC literate.Ability to communicate clearly and effectively.Soldering experience through-hole, basic SMD, wire-to-wire.Experience of working in a small to medium-sized company.Experience working within a regulated industry.Experience in operating equipment in a machine shop i.e., Lathe, Pillar drills, Bench grinder etc.Experience of PCB testing & fault finding an advantage.Experience in drilling/tapping of metal work.Minimum of 5 years in a Mechanical/Engineering/Production environment.Working Hours -Monday to Thursday 8.00am - 5.00pm. Friday- 8.00am - 12.45pm.The Rewards and the BenefitsBonus scheme.Company pension.Free On-site parking.Employee Assistance Programme (EAP).TPBN1_UKTJ

Bolting Technicians Required – Immediate Start | Wallsend 🚨 We're looking for experienced Bolting Technicians for a 1–2 week contract in Wallsend, with an immediate start available. 💰 £21.50 per hour PAYE with Holiday pay accrued for every hour worked 🕒 Day Shift Duties include: 🔧 Working from a MEWP (Mobile Elevating Work Platform) 🔧 Cutting out existing bobtail fixings using specialist tools 🔧 Removing and replacing brackets 🔧 Installing new brackets 🔧 Fitting new bobtail fixings using specialist installation equipment Requirements: ✅ Previous bolting experience ✅ IPAF licence desirable ✅ Available to start immediately If you're interested please email you CV to Ashton at CDM...

Zenith are looking to recruit a Geospatial Apprenticeship Trainer. The role is to deliver high-quality teaching and learning for the Level 3 Geospatial Survey Technician apprenticeship, both face-to-face and remotely. Manage a caseload of learners and employers, ensuring timely achievement and progression. Support the raising of standards in line with Zenith’s strategic objectives and the technical demands of the geospatial sector.. Role responsibilities and requirements: To deliver high quality teaching and learning sessions that will stimulate learning appropriate to learner needs covering topics including: Surveying principles and techniques - Use of GNSS, total stations, and laser scanners - Data collection, processing, and geospatial software (e.g. AutoCAD, GIS) - Health & safety in field environments - Mapping, cartography, and spatial data interpretation Prepare lesson plans and schemes of learning that meet the apprenticeship standard and reflect current industry practices. Use initial assessments to tailor learning for apprentices with varying levels of technical experience. Liaise with employers to ensure training reflects real-world surveying tasks and supports business needs. Monitor learner progress and provide feedback on technical skills, portfolio development, and EPA readiness. Support apprentices in developing core competencies such as: - Data accuracy and validat...

Our client is looking for a Mechanical Technician to work with an exciting, positive & dynamic maintenance team providing essential services, support and added value through their facilities & infrastructure to a number of leading Global Companies. You will be responsible for keeping the the plant and vehicles on site running and operational carrying out daily inspections and ppm. Responsibilities: Repairing and servicing plant and equipment when equipment breakdowns occur. Daily inspections and service of plant such as FLT’s, Trailers , Cranes etc. To ensure each operation is planned, supervised and carried out in a safe manner. Implement corrective actions identified by key maintenance performance indicators as a means to create overall equipment effectiveness. Liaising with Operations Team / Management to ensure allocated resources are effective. Ensure daily shift reports and processes are completed each day with relevant data. Conduct daily shift briefings to communicate work instructions with employees and immediate team. Working with the current supervisor to his instruction and providing supervisory support when nescasary Conform to all relevant HS&E regulations and relevant standards. The Person Knowledge of machinery, hydraulic electrical and other systems Experienced in servicing, testing and repairing vehicles, plant and equipment Experienc...

Temporary Maintenance Technician Hourly pay rate: £23 (incl shift) Shift Pattern: 2 shifts - Monday to Friday, 6am-2pm / 2pm-10pm Location: Wallsend We are seeking a temporary Maintenance Technician with either an electrical or mechanical bias to ensure the reliability and availability of plant and machinery. This role is focused on minimizing downtime through effective maintenance, SMED activities, continuous improvement projects, and strict adherence to health and safety standards. Key Responsibilities; Carry out planned and reactive maintenance to keep machinery operating efficiently. Assist with process setup and participate in SMED activities to reduce downtime. Work closely with production teams to ensure smooth operations and equipment availability. Support and actively engage in continuous improvement initiatives, promoting best operational practices. Ensure compliance with company policies and relevant legislation (Health & Safety, Quality, Environment, HSE, COSHH, ISO 14001, etc.). Coordinate audits, review SOPs, and promote best practices in health, safety, and quality. Contribute to project work as required and support other sites when needed. Skills & Competencies; Qualifications: City & Guilds or equivalent in Mechanical/Electrical Engineering. Ability to set up and adjust machines and processes using SMED. Strong mechanical and electrical knowledge, including basic PLC programming and fault-finding skills. ...

MTrec’s new career opportunity Our client are specilaists in their industry sector, they are looking to recruit a Calibration and Test Technician on a permanent basis.

An exciting opportunity has just opened at Stoneacre, Toyota! We are excited to be recruiting for a Motor Vehicle Technician.

Join the largest car manufacturer, Toyota, as a Motor Vehicle Technician.

Electronics Technician needed to test, verify, and support electronic products, including customer support and documentation.

My client, who is an award-winning practice of Architects, Engineers, and Project Managers, based in Newcastle are looking to bolster an established, successful team with an Architectural Technician / Technologist. This practice uses Revit on a daily basis so it is essential that the successful Arch

VEHICLE TECHNICIAN Location: Newcastle Salary: OTE Up to £39,730 (Uncapped) | Basic Salary £31,000 - £34,000 (Depending on Qualifications) Hours: 40 Hours, Monday to Friday, 8:30am - 5:00pm | 1 in 3 Saturdays, 8:30am - 12:30pm Job Type: Full-Time, Permanent Looking for

Opportunity for Laboratory Technician Our client is a largest soft drinks manufacturer and they are looking for the Laboratory Technician to join theirs team you will support the Laboratory Supervisor with the following:.

VEHICLE TECHNICIAN Location: Sunderland Salary: Up to £34,000 Basic Salary | OTE Up to £41,000 Job Type: Full-Time, Permanent Looking for a role where your technical skills are recognised, your earning potential is rewarded, and your career can continue to progress? If you&#

As a Operations Support Technician, you will be responsible for:.

Facilities Maintenance Technician. Facilities Maintenance Technician.

Are you a Project Manager/Coordinator/CAD Technician or similar coming from a background in the Construction/MEP/Leisure/Wellness Industry or a related field, looking to join a well-established, rapidly growing company, taking the leisure industry by storm?. On offer for the successful Project Manag

Job Title: Lab/Chromascan Technician. Join our team as a Chromascan Technician!.

Were looking for 2 proactive individuals to join our clients growing team, working in a fast-paced production environment assembling self-checkout systems and performing light IT configuration.If you enjoy working with your hands, have a keen eye for detail, and are comfortable around tech, this cou

GBR Recruitment Ltd are working exclusively with a leading Groundcare machinery business recruiting for an experienced Groundcare Technician / Groundcare Machinery Engineer to work across a multitude of different groundcare / landscaping & greenkeeping machinery inc. As the Agricultural Technician y

Role: CAD Technician Location: Norfolk Sector: Water Contract: 6 months Hybrid: Possible Skills: Mid-level seniority Experience with AutoCAD (essential) and Revit (preferred) Water sector experience designing pipework and chambers Able to work independently & within a team Good communication

Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter with

Join Halfords as a Vehicle Service Technician where you will carry out interim, full and major services as well as any follow up repair and replacement work. Qualified Mechanic or Technician??.

Catch 22 are recruiting on Trainee Validation Technicians on behalf of a growing specialist technical services business operating within highly regulated environments across the UK.

North East 💷 Up to £35,000 🕒 Dayshift | 9-Day Fortnight | Every Other Friday Off CDM Recruitment are working with a well-established and highly successful manufacturing business who are looking to recruit a Design Technician to join their growing engineering team.

The Role As a Process Technician, you'll be responsible for directing product formulation activities, testing materials throughout the manufacturing process and approving finished products for packing and dispatch. Process Technician Hull (HU12) Starting Salary: £33,373 ⬆࿠

Multiskilled Maintenance Technician Location: Sunderland Permanent staff role Salary: £48,324. Shift Pattern: DAYS: Monday – Thursday: 07:00 - 15:15 Friday: 07:00 - 14:45 LATES: Monday – Thursday: 16:20 - 00:35 Friday: 14:55 - 22:40 We’re looking for a proacti

Maintenance Technician Salary £29,120 - £31,512 per year dependent on experience Hours:40 Hours per week Monday to Friday - to include 3pm - 8pm - Additional 3 hours per day to be agreed Location: KT24 5JPMaintenance Technician School Staffing Solutions are currently looking to recruit

Vehicle Technician role: Strong Basic Salary subject to experience as MET Technician £48000 OTE Manufacturers Training Pensio, Critical Illness Cover Generous holidays Recognised as Top Employer in Motor Industry The Ideal Vehicle Technician: * At least 3 years experi

OTE (comprising of salary, bonus, overtime & callout rates).Uncapped bonus scheme, including Overtime & Call-out rates.Mobile role Van, Tools & PPE provided.Are you an experienced CommercialVehicle Tyre Fitter looking for the next step in your career? If so, then look no further - apply today to th

Field / Workshop Service Engineer (CNC) Contract: Full-time, Permanent Experience: Ideally 6+ years' practical experience (engineers with less experience may also be considered depending on their skill set).Our client is seeking an experienced Field / Workshop Service Engineer to join their gr

Commercial Vehicle Technician Location: Lincoln Salary: £44,395 salary + Overtime + Call-Out Payments Hours: 45 Hours Per Week | Early or Late Shift Pattern | Alternate Saturday Mornings Are you an experienced Commercial Vehicle Technician looking to join a well-established dealership that

Benefits for Vehicle Technician: • Starting salary competitive within the industry or Attractive starting salary • Company pension scheme • Generous holiday allowance Role Overview – Vehicle Technician: • &n

We’re currently recruiting for a Mobile HGV Technician – (South East), Door-to-Door Paid) Hours: Full Time, 45 hours per week, Monday to Friday Salary: Basic salary is £48,000 to £50,000 per year (permanent), with overtime paid at 1. The successful Mobile HGV Technician will

Candidates MUST HAVE demonstrable experience within injection moulding manufacturing with good mould setting and processing skills This opportunity will suit an Injection Moulding Technician who is looking to continue their development and further their career within the industry Role: Th

Senior Payroll Technician | Permanent | Lincoln | Hybrid | £35,000-£37,000. Following continued growth and positive change, they are now looking to appoint an experienced Senior Payroll Technician to join their Lincoln team.

Mobile Vehicle Technician - Night Shift. Our client, a highly regarded main dealer is seeking a motivated Mobile Vehicle Technician to join their busy Mobile Service Team on the night shift.

Job Title: Design and Technology (DT) Technician Location: East London Job Type: Full-Time, Long-Term About Us: Remedy connects skilled professionals with schools across London. We are currently seeking a reliable and experienced Design and Technology (DT) Technician to join a secondary school i

No previous experience is needed — just a.Working Hours: Days and Nights roles available – 40 hours per week.Full training provided – including industry-recognised qualifications.Company van & fuel card for work use.Clear long-term career progression.Temporary-to-permanent opportunity.You

NORTH WEST AMBULANCE SERVICE Motor Vehicle Technician Keeping Frontline Ambulances Safe, Roadworthy and Ready to Respond The Role We are seeking a highly skilled and motivated Vehicle Technician / Fleet Engineer to join our Fleet Services team. This is an excellent opportunity for an experienced

SERVICE & PREPARATION TECHNICIAN Location: Newcastle Salary: Realistic Annual Earnings of £38,000 - £52,500 (Depending on Experience, Qualifications & Bonus Structure) Hours: Choose 40 Hours Monday to Friday (8:30am - 5:00pm) plus 1 in 3 Saturdays (8:30am - 12:30pm) or a Fixed 4-Day W

Contributes to an exceptional resident experience alongside the Community team and Estates Management team through the provision of a high standard of repairs, maintenance tasks, planned and unplanned works and statutory compliance of the building fabric and mechanical and electrical systems.Inspect

We are currently recruiting for the position of Roadside Vehicle Technician on behalf of our client, a reputable UK-wide recovery business. Benefits: Competitive basic salary of £50,669, with an OTE of up to £57,000 per annum Working hours of 40 hours per week with flexible shifts betwe

Due to continued growth, they are looking to recruit experienced HGV & Trailer Technicians to join their workshop team.

Lift Technician (NVQ Level 4 Qualified). The Lift Technician is responsible for the installation, maintenance, servicing, repair, fault diagnosis, and testing of passenger, goods, platform, and specialist lift systems.

Field Service Technician (Full Training) Home Based: South West England £30,000 + Overtime + Full training + Bonus + Van + Excellent Company Benefits Do you have hands on experience, looking for structured training, a highly varied role and plenty of overtime? This is an excellent opportu

What We Are Looking For Relevant Experience: Proven experience as an Electrical Technician with a strong background in control p. Job Title: Electrical Technician - Control Panels Location: Newcastle Upon Tyne Position Type: Long-Term Temporary Contract Pay Rate: £20. Hours: Dayshift (Initia