Trabajos mechanical engineer en PeterboroughCrear alertas

Job Description:This role offers the opportunity to develop your career in a supportive environment where your contribution genuinely matters and where you will be trusted to make a difference.We are looking for someone who is eager to develop, communicates clearly, works collaboratively, takes ownership and consistently delivers high standards while reflecting our values in everything they do.The ideal candidate will bring a positive, can-do attitude, a strong work ethic, and a willingness to get stuck in, embracing opportunities to learn, supporting colleagues, and contributing to the success of the wider team.You will be fully supported and encouraged to improve and progress as we want to develop and keep exceptional engineers.What We OfferWe believe in recognising and rewarding great work. Our benefits include:Competitive hourly rateCompany vehicle with fuel card or allowanceCorporate clothingEmployee profit share scheme and long service awards21 days holiday plus bank holidaysEarly finish on FridaysHealth and wellbeing support, including access to qualified Mental Health First AidersPositive working culture supported by the Princebuild Founders Trust and Princebuild Foundation, helping local community projectsOngoing training, development, and clear career progression opportunitiesAn inclusive employer, accredited by Investors in People and Positive About Disabled PeopleRegular social events and charity initiatives throughout the yearWhat Were Looking ForWe welcome applicants from a range of backgrounds and experience. To succeed in this role, you will ideally have:Essential:NVQ Level 3 in Plumbing & Heating or relevant equivalentMinimum of 3 years experience as a plumbing & heating engineer or a similar roleUnvented Hot Water and Water Supply (Water Fittings) Regulations certificationsKnowledge and strong understanding of commercial mechanical systemsWillingness to travel on a daily basis and stay away when required for the needs of the businessA proactive, positive and solutions-focused approach aligned with our values of Building, Sharing, and CaringExcellent communication and teamwork skillsConfidence using IT systems (Microsoft Office and project tools). Site based employees are issued with an iPad and relevant work programmesFull UK driving licence (minimum 6 months post-test experience)Commitment to professional standards, learning and continuous improvementDesirable:Gas QualificationsJIB PHMES CSCS CardSMSTS or SSSTSFirst Aid at Work CertificationIPAF MEWP 3a & 3b,PASMA Towers for UsersWe encourage you to apply even if you do not meet every requirement. Attitude, potential, and willingness to learn are just as important to us.Please Note: This role requires an Enhanced DBS check (including the Childrens and Adults Barred Lists), any may require additional vetting as required by clients. All checks must be maintained and renewed upon request.Job Description What Youll Be DoingReporting to the Department Manager, you will support the Building Services team in delivering a diverse range of mechanical projects valued up to £1m. Projects span commercial, retail, public sector and government properties, including shopping centres, supermarkets, police stations and other secure facilities, some of which may require additional security clearance.This is a varied, hands-on role involving installation, maintenance, fault-finding, repair and upgrade works on commercial heating and plumbing systems. Duties may include servicing and replacing boilers, maintaining heating plant and plant room equipment, carrying out planned and reactive maintenance, commissioning systems, and diagnosing faults to ensure minimal disruption to customers.TPBN1_UKTJ

Field Service Engineer - Compressed Air Systems - UK Wide - Based Commutable To Newark\n We are recruiting on behalf of our client for a Multi-Skilled Field Service Engineer to support customers across the UK. This is an excellent opportunity for a skilled engineer with a strong electrical and mechanical background looking for a varied field-based role with excellent earning potential and ongoing training. The Role\n The successful candidate will carry out planned preventative maintenance, fault finding, servicing, and repair work on specialist compressed air equipment at customer sites nationwide. \n This is a field-based role involving travel across the UK, with occasional overnight stays required but you must be commutable to Newark. Key Responsibilities\n\n • Diagnose faults and carry out repairs on rail depot and compressed air equipment\n, • Complete planned preventative maintenance (PPM) in line with OEM and company standards\n, • Service and maintain electrical and mechanical systems including:\n \n, • Pumps\n, • Compressors\n, • Vacuum systems\n, • Hydraulic equipment\n, • Pneumatic systems\n \n, • Ensure all work is completed in accordance with health, safety, quality, and environmental procedures\n, • Complete service documentation, reports, and risk assessments accurately\n, • Liaise professionally with customers on-site to minimise disruption and maintain high service standards\n, • Participate in an on-call rota with additional standby and call-out payments\n, • Attend manufacturer and internal training to maintain technical competency\nRequirements\n\n, • Time-served or apprentice-trained engineer\n, • Engineering qualification essential (Electrical and/or Mechanical Engineering)\n, • Previous field service engineering experience preferred\n, • Strong electrical and mechanical fault-finding skills\n, • Experience working on industrial equipment, compressed air systems or heavy plant machinery would be advantageous\n, • Good understanding of health & safety procedures within engineering environments\n, • Full UK driving licence essential\n, • Strong communication and problem-solving skills\nWhat's on Offer\n\n, • Competitive salary with paid overtime (£34K-£39K basic salary with good overtime rates, £45K-£50K OTE)\n, • On-call allowance and additional call-out payments\n, • Company vehicle provided\n, • Specialist tools, PPE, mobile phone, and tablet supplied\n, • Ongoing training and development opportunities\n, • 25 days holiday plus bank holidays\n, • Pension scheme and additional company benefits\n

Job Title: Electrical Maintenance EngineerLocation: NottinghamJob Reference: JBTNORJob Type: ContractDuration: OngoingRate: £36+ per hour outside of IR35Job Description - Electrical maintenance engineerMy Client is a leading manufacturing site looking for Electrical maintenance engineer with FMCG experience to join on both an ongoing basis.Duties as a Electrical maintenance engineer:Reacting to breakdowns both electrically and mechanically, fault finding, analysing and continuously improving the site.Work closely with other departments to improve the site.Attend meetings as required, analyse data and find solutions to improve equipment performance whilst ensuring safe working practice and full communications are maintained at all times.In addition, you will be involved in projects within the business to develop an effective engineering install and commissioning.PLC fault findingRequirements as a Electrical maintenance engineer:A formal qualification in an electrical or mechanical engineering subject (apprentice served, NVQ, HNC or equivalent)Strong electrical experience preferable within a FMCG environment.Knowledge / experience of working with controls, analysing faults and providing solutions.Experience of both reactive and preventative maintenanceGood technical ability relating to automation hardware and software.Strong organisation and communication skills and the ability to work in a multi-disciplined team of varying levels of technical experience.please apply ASAP if you are interested in this eletcrical maintenance engineer positionTPBN1_UKTJ

This Mechanical Maintenance Engineer role is working with one of the UK's leading manufacturing organisations and offers a fantastic salary of £55,000 plus a performance bonus, excellent industry benefits including pension match to 10% and fantastic overtime opportunities. \n Based near the area of Whittlesey, the role is 4 on 4 off days and nights, however, currently the nights are from 10am to 10pm... \n \n ZIPC1_UKTJ

Electrical Maintenance Engineer (Nights)£46,000 - £47,000 + Night Shift Allowance + Overtime OTE 60k + Healthcare + 23 Days HolidayPeterboroughAre you an Electrical Maintenance Engineer from a manufacturing background seeking a new challenge with a market-leading company, receiving specialist PLC training with state-of-the-art machinery?In this nights-based role you will be working on a wide range of brand new and refurbished manufacturing machinery, both mechanically and electrically. This will include 3-phase motors, drives, gearboxes, pneumatics, and PLCs with training given if needed.Founded over 25 years ago, this manufacturer has risen to the top in their niche market and pride themselves on being the UK's number one in their field. With multiple sites across the UK, they have recently moved to this large new production facility and invested heavily into the machinery.This role would suit a Maintenance Engineer who is looking to work nights for a large, reputable company who will further their skill set with ongoing training on a range of equipment.The Role:Planned and reactive maintenance on manufacturing machineryWorking on 3-phase motors, drives, hydraulics, gearboxes, and PLCsTraining given through shadowing and courses to fill in skill gapsSunday to Thursday, 10pm - 6amOvertime paid at 1.5xThe Person:Maintenance EngineerManufacturing backgroundElectrical experienceReference Number: BBBH25693abMaintenance, Engineer, Engineering, Technician, Manufacturing, Electrical, Mechanical, Machinery, Shifts, Night, Nights, Shift, Holbeach, Peterborough, Huntingdon, Stamford, Market DeepingIf you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

About Barhale \n Who are Barhale? \n Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including: \n\n • Water\n, • Trans...\n\n \n ZIPC1_UKTJ

Building Services Engineer Newark £40,000 - £60,000, depending on experience Job Summary We are looking for a Building Services Engineer to follow the RIBA plan of work and support the design, analysis, and delivery of mechanical, electrical, and public health (MEP) building systems. This is an exciting opportunity for someone who enjoys turning design concepts into practical, sustainable, and compliant engineering solutions, while working closely with colleagues, clients, and project teams throughout the project life cycle. The role offers the chance to contribute to high-quality project delivery through a combination of technical knowledge, digital design skills, and on-site support. Key Responsibilities - Engineering Design: Develop thoughtful, low-carbon mechanical or electrical designs from early concepts through to final construction details, helping bring each project vision to life in a practical and sustainable way. - Modelling & Physics: Prepare accurate engineering calculations, load assessments, and detailed 3D coordination models using Revit (BIM) and AutoCAD, supporting wellinformed design decisions across each project. - Compliance & Safety: Support the delivery of designs that meet relevant Building Regulations, Industry Guidances/Standards, BREEAM requirements, and safety standards under the Building Safety Act, contributing to safe, compliant, and highquality project outcomes. - Project Documentation: Prepare clear and detailed technical specifications, project briefs, material schedules, and performance reports that support clients and project teams throughout delivery. - Collaboration: Work closely with architects, structural engineers, contractors, and wider project teams, building positive working relationships and contributing to joinedup and effective project delivery. - Customer Service: Provide friendly, responsive support to clients throughout the project life cycle, answering technical queries clearly, managing expectations thoughtfully, and building strong working relationships through a high standard of service. - On-Site Inspections: Independently travel to and assist with project site visits, surveys, progress reviews, responses to technical queries, and commissioning support, helping ensure designs are delivered effectively in practice. - Process Compliance: Follow the company's established processes and ways of working, helping to create consistency across the team, support colleagues, and ensure projects are delivered smoothly and to a high standard. - Performance & KPIs: Take ownership of your contribution to the business's three key KPIs, recognising that meeting these measures is an important part of every team member's role. Work consistently to deliver high standards, support team performance, and help the business achieve its wider goals. Skills & Experience Technical Skills - Sector Experience: Ideally 5 years' experience with a minimum of 3 years experience post graduate/qualifaction experience within an MEP design consultancy or dedicated design-and-build contractor environment, with a good understanding of project delivery in practice. - Technical Software: Good working knowledge of industry-standard software, including Autodesk Revit, AutoCAD, and relevant calculation tools such as SAP, iSBEM, IESVE, Hevacomp, Dialux, or Amtech. - Low-Carbon Knowledge: A sound understanding of building physics, passive design principles, heat pump technology, and renewable energy solutions, with an interest in supporting low-carbon project outcomes. Behavioural Competencies - Collaborative Mindset: Works positively across mechanical, electrical, and wider project disciplines, contributing to joined-up thinking and helping the team deliver wellcoordinated building design solutions. - Proactive Problem Solving: Looks ahead to identify potential design clashes, regulatory challenges, or site issues early, and responds with practical, thoughtful solutions that support smooth project delivery. - Client-Centric Communication: Communicates complex technical information in a clear and accessible way, helping clients, architects, and project teams understand engineering decisions with confidence. - Adaptability & Continuous Learning: Shows a positive approach to learning, staying open to new technologies, evolving software platforms, and changes in industry guidance and building regulations. - Accountability & Integrity: Takes responsibility for the quality and accuracy of their work, recognising the importance of safe, compliant, and well-considered engineering decisions. - Commercial Awareness: Understands the commercial context of project delivery, balancing quality, sustainability, and technical ambition with programme, budget, and client expectations. - Feedback & Continuous Improvement: Actively seeks and responds positively to both internal and external feedback, using it to strengthen working relationships, support personal development, and continuously improve the quality of work delivered. Qualifications & Education - Degree: A degree in Building Services Engineering, Mechanical Engineering, Electrical Engineering, or a related built-environment discipline, providing a strong foundation for this role. - Professional Standing: Membership, or a willingness to work towards membership, with a recognised professional institution such as CIBSE, IET, or IMechE. - Chartership Status: An interest in, or progress towards, achieving Chartered Engineer (CEng) or Incorporated Engineer (IEng) status would be welcomed. \n

Mechanical Maintenance Engineer \n Salary: Up to £55,000 \n Shifts: 4 on 4 off \n Location: Whittlesey \n Synergi are recruiting for an Mechanical Maintenance Engineer to join a large manufacturer in Whittlesey. The successful candidate would join the Engineering Team on a 4 on 4 off basis working an average of 42.5 hours a week. This is a great opportunity for an Mechanical Maintenance Engineer/Fitter to work in... \n \n \n ZIPC1_UKTJ

Mechanical Engineer \n Job Title – Mechanical Engineer \n Location – Eye, Suffolk Salary – £35,000 – £50,000 DOE (35-40k for a Junior Engineer / 45-50k for a Maintenacne Engineer) Shift – Rotational shift pattern (days & nights – Panama shift system) \nJob Role of the Mechanical Engineer\n A fantastic opportunity has arisen for a Mechanical Engineer to join a leading UK food manufacturing business operating ... \n\n\n\n\n \n ZIPC1_UKTJ

Nights Maintenance Engineer (Electrical)£46,000 - £47,000 + Night Shift Allowance + Overtime OTE 60k + Healthcare + 23 Days HolidayPeterboroughAre you a Maintenance Engineer with electrical experience, looking for a nights-based role within a market-leading manufacturer, offering a long-term and stable career working on an array of modern, cutting-edge machinery?In this nights-based role you will be working on a wide range of brand new and refurbished manufacturing machinery, both mechanically and electrically. This will include 3-phase motors, drives, gearboxes, pneumatics, and PLCs with training given if needed.Founded over 25 years ago, this manufacturer has risen to the top in their niche market and pride themselves on being the UK's number one in their field. With multiple sites across the UK, they have recently moved to this large new production facility and invested heavily into the machinery.This role would suit a Maintenance Engineer with electrical experience, looking to work permanent nights for a long-standing a highly reputable company.The Role:PPM and RM on a mix of old and new machineryWorking on 3-phase motors, drives, hydraulics, gearboxes, and PLCsTraining given through shadowing and courses to fill in skill gapsSunday to Thursday, 10pm - 6amOvertime paid at 1.5xThe Person:Maintenance EngineerElectrical experienceLooking to work nightsReference Number: BBBH25693aMaintenance, Engineer, Engineering, Technician, Manufacturing, Electrical, Mechanical, Machinery, Shifts, Night, Nights, Shift, Holbeach, Peterborough, Huntingdon, Stamford, Market DeepingIf you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Location: Field-based / Remote, with travel across Europe and the Middle EastSalary: competitive DOE, plus overtime and overseas travel allowancesAre you an experienced Field Service Engineer, Commissioning Engineer, Service Technician or Multi-Skilled Engineer looking for a high-earning international role with major project exposure, overtime and excellent benefits?This is a standout opportunity to join a global engineering business delivering advanced combustion, fired equipment and environmental technology solutions to customers across the oil, gas, petrochemical, power generation and industrial sectors.The role will involve commissioning, troubleshooting, maintenance, fault analysis and installation supervision on highly engineered combustion and fired equipment across Europe and the Middle East.This is ideal for someone who enjoys technical problem-solving, international travel, working on customer sites and taking ownership of complex engineering challenges.Whats in it for you?Salary of £50,000 £60,000Overtime availableOverseas travel allowance: £50 per night in EuropeOverseas travel allowance: £100 per night in high-risk countries2 x annual bonus schemes12% employer pension contribution27 days holiday plus bank holidaysBUPA private healthcareMedicash healthcare supportCritical illness coverEmployee Assistance ProgrammeGym membership / wellbeing benefitsLife insuranceProfessional training and development opportunitiesInternational travel across Europe and the Middle EastOpportunity to work with world-class engineering teamsSupportive, safety-driven working cultureRegular social events and strong team environmentThe RoleAs a Field Service Engineer / Commissioning Engineer, you will carry out site-based commissioning, maintenance, troubleshooting and technical support on combustion and fired equipment.You will work closely with customers, end users and internal engineering teams to ensure equipment is commissioned, maintained and supported safely, effectively and professionally.The role will involve extensive travel, potentially over 200 days per year, usually for periods of 12 weeks at a time, with some longer trips of up to 6 weeks depending on project requirements.Key responsibilities will include:Carrying out on-site commissioning, maintenance, troubleshooting and fault analysisSupporting installation supervision and retrofit equipment activitiesWorking on combustion and fired equipment including flare systems, boiler burners, process burners, thermal oxidisers and vapour recovery systemsPreparing RAMS, site visit reports, timesheets and client documentationReading and interpreting P&IDs, electrical schematics and mechanical drawingsSupporting site turnarounds, outages and service contractsDelivering technical training to end-user personnel both on site and in classroom settingsIdentifying opportunities for aftermarket spares, service support and additional customer solutionsBuilding strong relationships with customers and end usersWorking safely at all times in line with company and customer health and safety proceduresAbout YouYou will need to be a practical, hands-on Field Service Engineer or Commissioning Engineer with strong technical capability and the flexibility to travel extensively.This role could suit someone from combustion, oil and gas, petrochemical, power generation, process plant, industrial services, controls, mechanical, electrical, instrumentation or multi-skilled engineering backgrounds.You will ideally have:Experience as a Field Service Engineer, Commissioning Engineer, Service Engineer, Multi-Skilled Engineer or Service TechnicianStrong mechanical, electrical, instrumentation or controls knowledgeExperience with PLC control systems, fault finding or industrial control systemsAbility to read P&IDs, electrical schematics and mechanical drawingsExperience working on process plant, combustion systems, fired equipment, burners, flares, thermal oxidisers, boilers or similar industrial equipmentStrong fault-finding and troubleshooting skillsGood verbal and written communication skillsStrong computer skills for reports, RAMS, timesheets and documentationA proactive, self-motivated approachWillingness to travel extensively across Europe and the Middle EastConfidence working at height, in confined spaces and potentially offshore environmentsStrong commitment to health and safetyUseful but not essential:Previous combustion experienceOil and gas, petrochemical, refinery, power generation or energy sector experienceExperience supervising outages, turnarounds, installations or retrofit projectsTime-served background working away from homeExperience delivering customer training or site-based technical supportLocation / TravelThis is a field-based / remote role involving extensive international travel across Europe and the Middle East.The companys UK base is in the Stamford / Oakham / Rutland area, but candidates with the right field service, commissioning and travel flexibility will be considered from a wider UK location.Candidates must be comfortable with regular overseas travel, periods away from home and working on customer sites in demanding industrial environments.Apply NowIf you are an experienced Field Service Engineer, Commissioning Engineer, Service Engineer, Multi-Skilled Engineer or Service Technician looking for a high-earning international role with overtime, travel allowances, excellent benefits and major technical variety, please apply today for immediate consideration.TPBN1_UKTJ

About BarhaleWho are Barhale?Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including:WaterTransportBuilt environmentEnergyWe operate as a tier one partner for blue chip, regulated and private clients, working as part of large frameworks, joint ventures and alliances, as well as on individual standalone projects, developing long-term relationships based on delivering to the Barhale values which have been integral to our business since their inception in 1985.Our direct delivery model is at the core of everything we do, as we believe that people are our greatest asset. Therefore, we robustly source, train and retain all our own frontline delivery teams as well as management and support services. We employ over 1,200 employees nationwide.We possess a range of specialist skills to support our civil engineering and infrastructure activities, including:TunnellingMEICATemporary and permanent designSteel-fabricationSigns (design and fabrication)Health & safety equipment and products, including PPECompany Website:https://www.barhale.co.uk/Company Showcase Video:https://youtu.be/ufRG5xgM8MWhy join Barhale?As Gold Investors in People, we are committed to a high standard of people practices, creating an inclusive environment and ensuring cultural alignment to business strategy, ethos and philosophies.Job security, long-term secured work through various frameworks and large infrastructure schemesA broad range of civil engineering, mechanical and electrical schemes across some of the UKs largest infrastructure projects and clientsStrong career progression as demonstrated by our track record in promoting from within, as we believe this is a key driver of our successCivil EngineerWho are we?Join the @one Alliance a collaborative partnership of eight industry-leading companies (Anglian Water, Balfour Beatty, Barhale, Binnies, MMB, MWH Treatment, Skanska, and SWECO) delivering over half of Anglian Waters capital investment programme. As we prepare for the challenges and opportunities of AMP8, were looking for talented individuals to help us shape the future of water infrastructure.At Anglian Water, were Always Exploring ensuring we remain competitive, attractive, and rewarding for both existing and prospective employees. By Doing The Right Thing, were committed to recognising and rewarding our people fairly and transparently, while Building Trust through a culture that prioritises health, safety, and wellbeing.What will you be doing as our new Civil Engineer?As a Civil Engineer within one of our four business units, youll create and develop value-driven civil designs that achieve our capital investment programme outcomes and deliver value.Under the direction of the Project Design Manager, you'll deliver a range of Civil Engineering projects which not only continue to provide the region with safe drinking water but also involve pioneering and environmentally- focussed work which enhances our regions prosperity now and in years to come.Key ResponsibilitiesProduction of civil designs, calculations and specifications for water-sector assets, design schedule and specification of pipes, including ductile iron, steelwork and plastic.Working within multi-disciplinary design teams to produce designs which are on time, within budget and meet the required standards, liaising with stakeholders including Operations, contractors, and suppliers along the way.Drive excellence in Health and Safety in design by eliminating hazards and reducing risks during design whilst complying with Alliance CDM procedures.Progress projects from the feasibility stage through detailed design to construction.Undertake site visits to assess the current condition of our assets for feasibility studies and reports, and provide survey data for integration of the assets into our design solution.Provide support to update existing Standard Products and increase the number of Standard Products that are used within our design solutions on a repeatable basis.Identify and promote opportunities to meet the project's digital, sustainability, innovation and people objectives.Essential:BEng or MEng/MSc Degree in Civil or Structural Engineering, ideally working towards attaining Chartered Engineer statusGood knowledge and experience of undertaking structural calculations for various concrete structures, and demonstrable experience in undertaking the design of various civil engineering structuresExperience with relevant engineering design software packagesConfident in the utilisation of British Standards and Eurocodes, and have the ability to interpret ground investigation reports to enable you to design the correct solutionTeamwork and collaboration skillsStrong reporting, writing and data analysis skillsAbility to professionally challenge current ways of working and suggest new approachesDepending on your skills, experience, and interests, you could be aligned with one of our four business units:Place-Based ThinkingThe Place Based Thinking team delivers some of the largest and most complex projects across the @one Alliance. Made up of six Senior Project Manager teams, we oversee 19 catchments, covering key sites such as Whitlingham, Flag Fen, Great Billing, Cotton Valley, Bedford, Colchester, and Ipswich Cliff Quays. These projects involve managing all parts of the network from rising and gravity mains, pumping stations, high spilling overflows, and water recycling centres.WaterThe Water Business Unit provides strategic support across the clean water network, covering both system performance and infrastructure planning. We assess the future hydraulic state of the network in response to population growth and increased demand, support the design and delivery of capital and infrastructure schemes to ensure hydraulic resilience, and work with optimisation teams to enhance overall network efficiency.Water Recycling (East and West)Our Water Recycling Business Unit, split into East and West regions, is responsible for the collection, conveyance, and treatment of wastewater across an extensive network. We operate over 76,000?km of sewerage infrastructure and 1,163 treatment centres, ensuring safe and sustainable discharge to the environment while driving innovation and environmental performance.Caring and investing in youOur values have been embedded at Barhale for over 40 years, and they are our guiding principles regarding how we care for and invest in people. Our values are our commitment to being a people-centric company.As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them.From the moment you join us, your well-being and career aspirations will be supported by.Competitive salaryCompany PensionLife AssurancePrivate Medical25 days of annual leave in addition to 8 public bank holidays and loyalty days8 hours volunteeringEmployee Assistance Programme to support your mental, physiological and financial wellbeingFlexible benefits via salary sacrificeCompany car/green car scheme/car allowance/Van (dependent on position)Leadership & management training and coachingRegular line management engagement and appraisal to support your career progressionDevelopment supported by internal and externally delivered trainingContinuous service awardsWould you like to know more?Please contact our Recruitment team viaTPBN1UKTJ

Mechanical Design Engineer \n Peterborough \n Circa £48,000 \n Permanent \n Are you looking for a new design role to work with a growing company working on a diverse range of hygienic projects from sheet metal to fluid and powder process systems which you are able to grow with future development opportunities? \n I am exclusively working with an excellent business who work within the sub contract manufacturing indust... \n \n ZIPC1_UKTJ

WELCOME TO LINAKERFor over 30 years, Linaker has built a reputation for delivering dependable, high-quality mechanical engineering services across a wide range of client environments. Our strength lies in keeping critical systems operationalsupporting organisations with technical precision, responsive maintenance, and long-term reliability. Founded on trust, care, and reliability, were more than a service providerwere a fully embedded partner in our clients operations.ABOUT THE ROLEAs an HVAC Engineer, you will be part of our National engineering team, responsible for delivering planned and reactive maintenance across a range of commercial and retail sites. You will ensure HVAC systems operate safely, efficiently, and in full compliance with statutory and client requirements.WHAT YOU WILL BE RESPONSIBLE FOR WITHIN YOUR SPECIFIED AREACarry out PPM and reactive maintenance on HVAC systems including AHUs, FCUs, VRV/VRF, split systems, and chillersFault finding, diagnosis, and repair of mechanical and electrical HVAC components Ensure work is completed in line with statutory compliance, SFG20, and company procedures Complete job documentation accurately via CAFM system Identify and report remedial works with clear technical detail Maintain van stock, tools, and plant Participate in call-out rota where applicableWHAT WE ARE LOOKING FORNVQ Level 3 in Air Conditioning & Refrigeration / HVAC (or equivalent) F-Gas Category 1 Proven commercial HVAC maintenance experience Good electrical and mechanical fault-finding skills Full UK Driving Licence Strong understanding of Health & SafetyACRIB Gold Skills Card (Desirable)Understanding of F-Gas compliance and environmental regulations.Electrical qualification or knowledgeAsbestos awareness (Desirable)Experience working under the SFG20 framework for maintenance schedules.Experience with larger complex sites, or critical plant systems (e.g. chillers, large AHUs).5 Years Industry Experience in similar position (Preferred)Air Source Heat Pump (ASHP) or Ground Source Heat Pump (GSHP) (Preferred)Be part of the on call rotaTHE PACKAGE25 Days annual leave plus bank holidays.Buy and sell holiday to suit your schedule.One paid volunteering day per year, empowering you to support causes that matter to you.Company Van for site travel.Access to our Employee assistant programme for wellbeing support.Auto enrolment in the company pension scheme.Full training by a supportive friendly team.Annual events.INTERESTEDThis is a fantastic opportunity to lead and develop a team of engineers in a business thats growing fast and investing in talent. If youre ready to step into a pivotal role, influence outcomes, and build something meaningful, wed love to hear from you.If you think youre a match, get in touch todayTPBN1_UKTJ

About BarhaleWho are Barhale?Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including:WaterTransportBuilt environmentEnergyWe operate as a tier one partner for blue chip, regulated and private clients, working as part of large frameworks, joint ventures and alliances, as well as on individual standalone projects, developing long-term relationships based on delivering to the Barhale values which have been integral to our business since their inception in 1985.Our direct delivery model is at the core of everything we do, as we believe that people are our greatest asset. Therefore, we robustly source, train and retain all our own frontline delivery teams as well as management and support services. We employ over 1,200 employees nationwide.We possess a range of specialist skills to support our civil engineering and infrastructure activities, including:TunnellingMEICATemporary and permanent designSteel-fabricationSigns (design and fabrication)Health & safety equipment and products, including PPECompany Website:https://www.barhale.co.uk/Company Showcase Video:https://youtu.be/ufRG5xgM8MWhy join Barhale?As Gold Investors in People, we are committed to a high standard of people practices, creating an inclusive environment and ensuring cultural alignment to business strategy, ethos and philosophies.Job security, long-term secured work through various frameworks and large infrastructure schemesA broad range of civil engineering, mechanical and electrical schemes across some of the UKs largest infrastructure projects and clientsStrong career progression as demonstrated by our track record in promoting from within, as we believe this is a key driver of our successProcess EngineerWho are we?Join the @one Alliance a collaborative partnership of eight industry-leading companies (Anglian Water, Balfour Beatty, Barhale, Binnies, MMB, MWH Treatment, Skanska, and SWECO) delivering over half of Anglian Waters capital investment programme. As we prepare for the challenges and opportunities of AMP8, were looking for talented individuals to help us shape the future of water infrastructure.At Anglian Water, were Always Exploring ensuring we remain competitive, attractive, and rewarding for both existing and prospective employees. By Doing The Right Thing, were committed to recognising and rewarding our people fairly and transparently, while Building Trust through a culture that prioritises health, safety, and wellbeing.What will you be doing as our new Process Engineer?As a Process Engineer within one of our four business units, you will contribute to the development and delivery of process designs for water and water recycling projects on AMP8. Youll support senior engineers in producing design outputs and help ensure these meet required standards, specifications, and project objectives.Key ResponsibilitiesSupport the delivery of process design activities, ensuring they meet safety, technical, and quality requirements.Prepare and contribute to design deliverables, including mass balances, hydraulic calculations, P&IDs, and process flow diagrams.Work collaboratively with multidisciplinary teams to support design reviews and incorporate feedback.Assist with design development tasks, contributing to the resolution of technical challenges.Ensure designs follow relevant health, safety, and environmental standards, including hazardous area regulations (DSEAR).Contribute to continuous improvement by applying innovative design approaches and supporting digital tools.Support engagement with stakeholders and suppliers as required to progress design work.Promote sustainable design practices and support carbon-reduction objectives across project delivery.Essential:A degree in Chemical, Mechanical, or Process Engineering, or equivalent experience.Some experience within the water sector or a related process-driven industry.A good understanding of process design principles, standards, and environmental considerations.Experience producing or contributing to technical design deliverables.An interest in progressing towards chartership (support provided).Familiarity with health, safety, and environmental requirements within engineering projects.Strong communication and problem-solving skills, with a collaborative and proactive approach.A genuine interest in sustainability and delivering environmentally responsible engineering solutions.Depending on your skills, experience, and interests, you could be aligned with one of our four business units:Place-Based ThinkingThe Place Based Thinking team delivers some of the largest and most complex projects across the @one Alliance. Made up of six Senior Project Manager teams, we oversee 19 catchments, covering key sites such as Whitlingham, Flag Fen, Great Billing, Cotton Valley, Bedford, Colchester, and Ipswich Cliff Quays. These projects involve managing all parts of the network from rising and gravity mains, pumping stations, high spilling overflows, and water recycling centres.WaterThe Water Business Unit provides strategic support across the clean water network, covering both system performance and infrastructure planning. We assess the future hydraulic state of the network in response to population growth and increased demand, support the design and delivery of capital and infrastructure schemes to ensure hydraulic resilience, and work with optimisation teams to enhance overall network efficiency.Water Recycling (East and West)Our Water Recycling Business Unit, split into East and West regions, is responsible for the collection, conveyance, and treatment of wastewater across an extensive network. We operate over 76,000 km of sewerage infrastructure and 1,163 treatment centres, ensuring safe and sustainable discharge to the environment while driving innovation and environmental performance.Caring and investing in youOur values have been embedded at Barhale for over 40 years, and they are our guiding principles regarding how we care and invest in people. Our values are our commitment to being a people-centric company.As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them.From the moment you join us, your well-being and career aspirations will be supported by.Competitive salaryCompany PensionLife AssurancePrivate Medical25 days of annual leave in addition to 8 public bank holidays and loyalty days8 hours volunteeringEmployee Assistance Programme to support your mental, physiological and financial wellbeingFlexible benefits via salary sacrificeCompany car/green car scheme/car allowance/Van (dependent on position)Leadership & management training and coachingRegular line management engagement and appraisal to support your career progressionDevelopment supported by internal and externally delivered trainingContinuous service awardsWould you like to know more?Please contact our Recruitment team viaTPBN1UKTJ

Maintenance EngineerUp to £46,000 + Company VanLocation: Peterborough / UK TravelHours: Monday to Friday, Days OnlyLooking for a Maintenance Engineer role that gets you away from the same four walls every day? This is a field-based position offering variety, independence, and the chance to work with food and packaging machinery at sites across the UK.We're recruiting for a Maintenance Engineer to join a growing engineering business supporting food manufacturing and packaging sites nationwide. Based from Whittlesey, you'll split your time between the workshop and customer sites, carrying out maintenance, installations, fault finding, and repairs on a wide range of production equipment.This role would suit a hands-on Maintenance Engineer who enjoys solving problems, working independently, and building strong relationships with customers. If you're looking for a Monday-to-Friday position without weekend shifts, this could be exactly what you're after.What's on Offer- Salary up to £46,000- Company van provided- Personal use of company van- Monday to Friday days role- No weekend working- Variety of work across multiple customer sites- Mix of site-based and field-based engineering- Opportunity to work independently and take ownership of jobs- Long-term opportunity with a growing business- Supportive engineering team behind you when neededWhat You'll Be Doing- Travelling to customer sites across the UK to carry out maintenance and repair work- Fault finding on mechanical and electrical systems- Installing and commissioning new machinery- Carrying out planned and reactive maintenance activities- Working on food processing and packaging equipment- Diagnosing breakdowns and implementing effective repairs- Building strong relationships with customers through excellent service- Completing service reports and maintaining accurate records- Supporting workshop-based activities from the Whittlesey site when requiredWhat We're Looking For- Experience working as a Maintenance Engineer, Service Engineer, or Field Service Engineer- Strong mechanical and electrical fault-finding skills- Experience maintaining production, food processing, or packaging machinery would be beneficial- Comfortable working independently and managing your own workload- Strong communication skills and customer-focused approach- Practical, hands-on engineer who enjoys problem solving- Full UK driving licence- Happy to travel throughout the UK as part of the roleMonday to Friday Days Only- No weekend working- Field-based role with travel across the UK- Mix of customer site work and workshop-based supportIf you're a Maintenance Engineer looking for more variety, more autonomy, and a Monday-to-Friday role where no two days are the same, we'd love to hear from you.TPBN1_UKTJ

Job Title: SolidWorks Mechanical Designer Job Type: Contract Term: 2 months (potential for extension) Start: Immediately Hourly Rate: £40 per hour Location: Herefordshire Onsite / Remote: Remote (with occasional visit to office) IR35 Status: Outside Our client is a long-established Engineering Design Consultancy, based in Herefordshire with strong skills in Mechanical and Electronic Engineering, Product Design and Analysis. Due to high workloads they are looking for an experienced SolidWorks Mechanical Design Engineer to join the team in an initial 2 month contract term. The ideal candidate will be a well rounded, mechanical designer with experience in design processes such as aluminium die casting and plastic injection moulding. The ideal candidate will be able to provide their own SolidWorks licence and workstation if working remotely. The client can provide this but you'd then need to be onsite. Skills and experience: Likely holds a relevant degree, though a strong track record and the right attitude are considered more valuable than formal qualifications. Demonstrated experience in leading the end-to-end design and development of mechanical components, assemblies, and systems-from concept through to production. Proficient in producing detailed 3D CAD models using SolidWorks, along with comprehensive engineering drawings and supporting technical documentation. Ensures all designs adhere to applicable industry standards and regulatory requirements. Collaborates effectively with cross-functional teams-including electrical, software, manufacturing, and quality assurance-to achieve fully integrated product solutions.

Senior Software Engineer (Rust / Robotics) West Midlands (Hybrid - can be remote for the right person) £600-£700/day (Inside IR35) | 2-3 months An engineering business in the West Midlands is looking for an experienced Senior Software Engineer to support a short-term project (2-3 months) and help get a key deliverable over the line. The role Work as part of a small, multi-disciplinary team across software, mechanical and electrical engineering. Focus on Rust development while contributing to wider engineering tasks. Support real-world deployment, working with Linux servers, data flows and system integration. What they're looking for Strong programming background with Rust (essential) Experience with C++ and solid computer science fundamentals Comfortable with Linux (development + server management) Exposure to hardware integration / real-world systems Familiarity with databases or Redis for data flows (desirable) PLC / automation experience is a bonus, but not essential The setup Day rate: £600-£700 (Inside IR35) Duration: 2-3 months (potential to extend) This is a great opportunity for someone who enjoys variety, working with modern tech in a small, agile team, and making an immediate impact on a live project.

The Role At Notpla we’re at the leading edge of sustainable innovation, creating natural alternatives to single-use plastic packaging that’s carefully engineered to create a healthier planet. Founded on the belief that nature knows best, we’re an innovative, ideas and action-oriented scale-up who develop and manufacture uncompromisingly natural packaging solutions from seaweed and plants. We are currently looking to bring in a Technical Project Manager to work on the technical category management of our flagship Ooho product and the rest of our edible packaging solutions. This is an exciting time to join Notpla, right on the brink of a record-breaking year for revenue and on-track for major growth in the next 18-24 months. Bolstering confidence in our financial performance, we have just secured a Series A+ fundraise for £20million, enabling us to scale our growth and environmental impact faster than ever. The Technical Project Manager will work directorly with our Chief Technology Officer to help define the technical direction of our range of edible packaging solutions. You will work with the Category owner to ensure that we are able to deliver the technical specifications required to meet our partners requirements, liaising with the technical team to ensure that everything is delivered on time and in full. Led by strong values, all Notpla employees are encouraged to take responsibility for their domain, giving a high level of autonomy. Our aim is to build an inspiring culture that's reflected in our working policies,environment and employees. Besides offering exciting roles and a great working environment, Notpla provides competitive salaries, the potential for EMI Share Options, a zero-carbon pension scheme, discounts with local businesses, and subsidised social activities. Our office first hybrid working policy allows you to work in the manner that maximises your productivity, while still creating a vibrant and collegiate work environment.. We are a social business with regular clubs and events, and we are proud of how our diverse workplace has created a community that is all pushing towards the common goal of making plastic disappear. Your profile We are looking for a Technical Project Manager with a desire and the experience to continue to work on hands-on maintenance and development of machinery. You will need to come from a mechanical or process engineering background, whilst having experience of running large, multi partner technical projects. As well as this you will need to have excellent communication and stakeholder management skills. This is a rare opportunity for a passionate and hands-on engineer, to take ownership of both project management pieces but also the development of processes and manufacturing techniques, whilst continuing to work hands-on with our bespoke in-house machinery. As well as the above your day to day responsibilities will include: Technical project management of our edible packaging range. Working with external suppliers and manufacturing partners to develop processes and manufacturing techniques. Liaising with our in house technical team to ensure technical delivery of all of our projects. Being the link between the formulation and ingredient requirements and the manufacturing process needs. Maintenance both planned and reactive of our in house manufacturing machinery. Working with the category owner to define the technical road map of the products. Working with the category owner to assist in the commercial development of the products. Identify and assess technical risks, ensuring proactive mitigation and resolution strategies. Chair dedicated technical meetings with technical resources, separate from standard project updates, to discuss technical progress against agreed milestones, challenges, and improvements. Foster a culture of collaboration, innovation, and continuous improvement within the technical community. Ensure technical standardization and best practices are consistently applied across the category (SOPs, Project & Trial planning, reporting). Salary £40,000 - £55,000 + EMI Share Options About us Notpla is a family of regenerative packaging materials, made from seaweed and plants. Behind these products is a company of the same name, deeply committed to making the planet a healthier place. Winner of the prestigious Earthshot Prize, Notpla are famed for their innovative, scalable alternatives to plastic. These include the edible liquid bubbles - Ooho, their seaweed-coated food containers, single-use films and rigid materials. To date, their solutions have already replaced 16 million pieces of single-use plastic from entering our environment. Notpla Limited takes inclusion and diversity seriously. It is important for us that we live by our values and our policies outline how – We work better together. Notpla is committed to encouraging equality, diversity and inclusion among our workforce, and eliminating unlawful discrimination.

Kitchensafe Engineer - London Marlowe Kitchen Fire Suppression is a leading provider of kitchen fire suppression systems. We specialize in the design, installation, and maintenance of systems for various establishments including hotels, restaurants, schools, hospitals, and fast-food outlets. We are currently seeking a skilled Account Manager to join our team. Basic Salary of £28,000 Benefits: Pension, Life Assurance, Travel Allowance, and more. Please see below for our comprehensive remuneration package._ About the Role: As a Kitchensafe Engineer, you will be responsible for installing, maintaining, and servicing Kitchensafe systems for our clients across the UK. Key Responsibilities; • Install and service Kitchensafe systems to the highest standards., • Carry out fault finding, diagnostics, and remedial work on Kitchensafe systems., • Participate in a 1-in-4 call-out rota, ensuring prompt and reliable service., • Liaise professionally with on-site concierge teams and management during works to ensure clear communication and customer satisfaction., • Accurately record all work completed using the PDA system., • Be comfortable with long-distance travel across the UK, with flexibility to stay away from home where required. Who we’re looking for As well as having all the usual attributes of a great Marlowe Kitchen Fire Suppression employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • Background knowledge of electrical or mechanical systems is advantageous but not essential., • Demonstrates a high level of attention to detail when carrying out installations and servicing., • Brings passion, energy, drive, and enthusiasm to the role., • Possesses a structured and methodical approach to work., • Strong ability to multi-task and manage workloads effectively to meet strict deadlines., • Excellent customer-facing and interpersonal skills, with the ability to build positive relationships., • Capable of working both independently and collaboratively as part of a team, using initiative when required., • Maintains a calm and professional approach under pressure., • Strong communication skills, with the ability to engage effectively with engineers, management, and customers. How we Attract, Reward & Retain Our Employees At Marlowe Kitchen Fire Suppression we recognise the importance of fairly rewarding our employees. We go above and beyond with our remuneration packages that not only meet the needs of a challenging economic climate, but we offer packages, benefits and incentives to support the broader needs of our people making their everyday lives and futures more comfortable. • Competitive base salary of £28,000, • Royal London pension scheme to help you plan for the future., • Life assurance at 4x your salary, giving peace of mind for you and your loved ones., • 25 days’ annual leave plus bank holidays, ensuring a healthy work-life balance., • Additional rewards through our referral scheme – earn up to £1,000 per successful referral, with no cap., • Comprehensive mental health and wellbeing support to help you thrive., • Employee recognition programme celebrating great work and achievements., • Free, secure onsite parking for convenience and peace of mind., • Clear career development and progression opportunities to support your long-term growth. A Little More About Marlowe Kitchen Fire Suppression We are a Fire Suppression specialist which gifts our clients a niche and bespoke service with undivided attention & dedication. However, we have the luxury and benefit of being part of a wider group of businesses within the Fire Protection, Security & Building Management Systems industry, allowing us to share best-practice, learning & development academies, Human Resource specialists and knowledge for constant improvement across the critical service industry. Big enough to provide but small enough to care. Our Business Include: • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com, • Alarm Communications acl.uk.com, • FAFS Fire & Security fafsfireandsecurity.com, • Clymac clymac.co.uk, • Marlowe Smoke Control marlowe-aov.co.uk, • Marlowe Fire & Security marlowefireandsecurity.com Equal Opportunities We strive to create a diverse, inclusive environment to encourage all our employees to be themselves. We celebrate what makes us unique and believe that adopting a culture of inclusion helps us to best serve our customers. We are committed to supporting equal opportunities, please inform us if you require any reasonable adjustments to enable you to participate in the recruitment process. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Are you passionate about engineering? Do you want to make a difference? You could be one of our 54k+ colleagues in over 30 countries working on inspiring projects in the most innovative companies. Join us and start building tomorrow’s world today! Job Title: Model Based Systems Engineer Location: Manchester (Hybrid – 1 day/month on-site) Employment: Full-Time, Permanent Sectors: Aerospace / Defence ALTEN UK is seeking a Model Based Systems Engineer to support high-profile aerospace programmes within the combat air domain. This is an exciting opportunity to work at the forefront of next-generation air platform development, where your models will contribute directly to complex system design, performance optimisation and full digital twin representations. You’ll collaborate with experienced engineers across multiple disciplines and play a key role in shaping system behaviour at a platform level. Responsibilities: • Develop and manage functional, plant, control and requirement models to represent platform systems in a model-based systems engineering (MBSE) environment., • Contribute to the creation and evolution of a digital twin of the air platform, supporting validation, verification and system optimisation activities., • Analyse system-level and aircraft performance metrics using modelling tools and real-world data., • Collaborate with engineering teams to define interfaces between systems, ensuring effective integration across platform and sub-system levels., • Support strategic modelling efforts aimed at reducing test burden and enhancing simulation and trial planning. Essential Skills & Experience • Bachelor’s degree (or higher) in a relevant engineering discipline (e.g. Aerospace, Mechanical, Systems, Electrical)., • Minimum of 2 years' experience within systems engineering, ideally within aerospace or defence., • Working knowledge of SysML, Matlab/Simulink, or Cameo Systems Modeller., • Understanding of aircraft systems and their key performance characteristics., • Familiarity with MBSE principles, tools and practices., • Must be Security Clearable (UK national), with UKEO clearance preferred. Why join us? We foster a community of dually talented individuals who are both entrepreneurs and technology specialists. Our teams embody the spirit of innovation and entrepreneurship, enabling us to develop solutions most efficiently. Our commitment to sustainable growth is unwavering, and we continuously strive for accelerated transformation and continuous improvement. Through ALTEN labs, mentoring programs, internal universities, and more, we are always pushing boundaries and embracing new possibilities. We offer incredible opportunities to join inspiring projects in the most innovative companies. We prioritise your career development with personalised support plans tailored to your own aspirations. We're here to empower you and help you reach your full potential. Join our passionate team and start building tomorrow, today! In short you get: • A personalised career path and a rewarding management style, • A chance to work on the most exciting engineering projects and technologies along with Premium Customers, • A huge diversity of engineering projects and industries, • A competitive salary, • Private Medical Insurance, • Pension Scheme, • Cycle-to-work Scheme among many additional benefits, • Social atmosphere, regular gatherings, and team buildings, • Flexible way of working (role dependent)

Are you passionate about engineering? Do you want to make a difference? You could be one of our 54k+ colleagues in over 30 countries working on inspiring projects in the most innovative companies. Join us and start building tomorrow’s world today! What will you be doing? We are looking for a skilled Model Based Systems Engineer to join our Defence sector projects. You will be responsible for system-level modelling and simulation, leveraging MathWorks toolsets to support the design and validation of complex systems. • Develop, model, and simulate complex systems using MATLAB and Simulink., • Apply system design principles to platforms such as Gas Turbines, Powertrains, or other large-scale engineering systems., • Collaborate with multidisciplinary teams to define and integrate system requirements., • Support system analysis, validation, and performance assessments. Experience, skills and qualifications required: • Degree in Engineering (Systems, Mechanical, Electrical, Aerospace, or related field)., • Proficiency in MathWorks toolsets (MATLAB, Simulink)., • Experience in complex system design (Gas Turbine, Powertrain, or similar)., • Strong problem-solving and analytical skills., • Must be eligible for UK SC Security Clearance (Minimum 5 Years in the UK) Why join us? We foster a community of dually talented individuals who are both entrepreneurs and technology specialists. Our teams embody the spirit of innovation and entrepreneurship, enabling us to develop solutions most efficiently. Our commitment to sustainable growth is unwavering, and we continuously strive for accelerated transformation and continuous improvement. Through ALTEN labs, mentoring programs, internal universities, and more, we are always pushing boundaries and embracing new possibilities. We offer incredible opportunities to join inspiring projects in the most innovative companies. We prioritise your career development with personalised support plans tailored to your own aspirations. We're here to empower you and help you reach your full potential. Join our passionate team and start building tomorrow, today! In short you get: • A personalised career path and a rewarding management style, • A chance to work on the most exciting engineering projects and technologies along with Premium Customers, • A huge diversity of engineering projects and industries, • A competitive salary, • Private Medical Insurance, • Pension Scheme, • Cycle-to-work Scheme among many additional benefits, • Social atmosphere, regular gatherings, and team buildings, • Flexible way of working (role dependent)

Design Engineer - Homebased Why Clymac? Are you passionate about safety and security? Since 1992, Clymac has been a leader in delivering fully integrated Fire & Security Systems across the UK. We’re looking for dedicated professionals to join our team and help us continue our mission of providing top-notch protection and peace of mind to our clients. At Clymac, you’ll have the opportunity to work with cutting-edge technology and be part of a team that values innovation, excellence, and customer satisfaction. If you’re ready to make a difference and grow your career with a trusted industry specialist, we want to hear from you! Clymac’s Design Engineers We are seeking an experienced and enthusiastic Design/Estimating Engineer to join our fast-paced design and estimating team. In this role, you will be responsible for producing accurate and compliant fire alarm system designs and cost estimates, supporting both pre-sales activities and project delivery. This position requires a strong technical understanding, attention to detail, and the ability to work collaboratively with internal teams and clients to deliver tailored, cost-effective solutions. • Lead the design and development of fire alarm system proposals, ensuring compliance with all relevant standards and regulations, including BS 5839, CDM regulations, and other applicable codes., • Proven ability to manage relationships and communicate effectively with Mechanical & Electrical (M&E) contractors, ensuring projects are delivered to the required standards and timelines., • Manage multiple design projects simultaneously, effectively prioritising workloads based on project deadlines and business needs., • Act as a customer-facing technical expert, working alongside Business Development Managers to present and deliver tailored design proposals., • Collaborate closely with Project Managers and installation teams to assess and negotiate installation costs for supply, installation, and commissioning projects., • Ensure all designs and proposals are accurately costed, aligned with company margin expectations, and appropriately approved and signed off prior to release., • Guarantee all quotations and designs are fully compliant with current legislation and industry standards, maintaining technical accuracy and integrity., • Deliver exceptional customer service by managing design enquiries efficiently—gathering and assessing necessary information, and responding promptly to client needs., • Provide ongoing technical support, guidance, and mentorship to team members, while coordinating with other internal departments to ensure cohesive project delivery., • Oversee the administration of current enquiries, including the preparation of project handover documentation and maintenance of the SRM system. Who We’re Looking For In addition to having all the usual attributes of a great Clymac employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team_, for this specific opportunity, we are looking for candidates who also offer, • Proven experience as a Fire Alarm Design Engineer, ideally supported by an FIA Design Qualification or equivalent industry certification., • Previous experience in a similar role, with a track record of liaising effectively with end users, contractors, and other stakeholders throughout the project lifecycle., • Proficient in AutoCAD, with the ability to produce accurate, standards-compliant system designs., • Excellent communication and interpersonal skills, with a strong focus on delivering outstanding customer service., • Full, clean UK driving licence, enabling site visits and client meetings as required., • Professional, relationship-driven approach, with the ability to build and maintain strong working relationships both internally and externally. Our Commitment to Attracting, Rewarding & Retaining Talent We’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary – £45,000 per annum, DOE, • Pension Plan – Helping you invest in a secure financial future, • Life Assurance – Peace of mind with coverage at 4x your annual salary, • Generous Holiday Allowance – 25 days paid leave plus all bank holidays, giving you time to recharge, • Referral Bonus Scheme – Earn up to £1,000 for every successful candidate you refer – with no limits, • Mental Health & Wellbeing Support – Access to confidential resources and support when you need it most, • Employee Recognition Programme – Celebrating your hard work and achievements throughout the year, • Career Development – Ongoing training, clear progression paths, and opportunities to grow within the business A Little More About Clymac At our core, we are a small, regionally focused business that prides itself on delivering a bespoke and reactive service. Our clients receive undivided attention and dedication, ensuring their needs are met with precision and care. Yet, we have the luxury of being part of a larger group of businesses within the Fire Protection, Security, and Building Management Systems industry. This connection allows us to share best practices, access learning and development academies, and benefit from Human Resource specialists and industry knowledge. This synergy ensures we are constantly improving and staying ahead in the critical service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Clymac, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Design Engineer - Homebased Why Clymac? Are you passionate about safety and security? Since 1992, Clymac has been a leader in delivering fully integrated Fire & Security Systems across the UK. We’re looking for dedicated professionals to join our team and help us continue our mission of providing top-notch protection and peace of mind to our clients. At Clymac, you’ll have the opportunity to work with cutting-edge technology and be part of a team that values innovation, excellence, and customer satisfaction. If you’re ready to make a difference and grow your career with a trusted industry specialist, we want to hear from you! Clymac’s Design Engineers We are seeking an experienced and enthusiastic Design/Estimating Engineer to join our fast-paced design and estimating team. In this role, you will be responsible for producing accurate and compliant fire alarm system designs and cost estimates, supporting both pre-sales activities and project delivery. This position requires a strong technical understanding, attention to detail, and the ability to work collaboratively with internal teams and clients to deliver tailored, cost-effective solutions. • Lead the design and development of fire alarm system proposals, ensuring compliance with all relevant standards and regulations, including BS 5839, CDM regulations, and other applicable codes., • Proven ability to manage relationships and communicate effectively with Mechanical & Electrical (M&E) contractors, ensuring projects are delivered to the required standards and timelines., • Manage multiple design projects simultaneously, effectively prioritising workloads based on project deadlines and business needs., • Act as a customer-facing technical expert, working alongside Business Development Managers to present and deliver tailored design proposals., • Collaborate closely with Project Managers and installation teams to assess and negotiate installation costs for supply, installation, and commissioning projects., • Ensure all designs and proposals are accurately costed, aligned with company margin expectations, and appropriately approved and signed off prior to release., • Guarantee all quotations and designs are fully compliant with current legislation and industry standards, maintaining technical accuracy and integrity., • Deliver exceptional customer service by managing design enquiries efficiently—gathering and assessing necessary information, and responding promptly to client needs., • Provide ongoing technical support, guidance, and mentorship to team members, while coordinating with other internal departments to ensure cohesive project delivery., • Oversee the administration of current enquiries, including the preparation of project handover documentation and maintenance of the SRM system. Who We’re Looking For In addition to having all the usual attributes of a great Clymac employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team_, for this specific opportunity, we are looking for candidates who also offer, • Proven experience as a Fire Alarm Design Engineer, ideally supported by an FIA Design Qualification or equivalent industry certification., • Previous experience in a similar role, with a track record of liaising effectively with end users, contractors, and other stakeholders throughout the project lifecycle., • Proficient in AutoCAD, with the ability to produce accurate, standards-compliant system designs., • Excellent communication and interpersonal skills, with a strong focus on delivering outstanding customer service., • Full, clean UK driving licence, enabling site visits and client meetings as required., • Professional, relationship-driven approach, with the ability to build and maintain strong working relationships both internally and externally. Our Commitment to Attracting, Rewarding & Retaining Talent We’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary – £45,000 per annum, DOE, • Pension Plan – Helping you invest in a secure financial future, • Life Assurance – Peace of mind with coverage at 4x your annual salary, • Generous Holiday Allowance – 25 days paid leave plus all bank holidays, giving you time to recharge, • Referral Bonus Scheme – Earn up to £1,000 for every successful candidate you refer – with no limits, • Mental Health & Wellbeing Support – Access to confidential resources and support when you need it most, • Employee Recognition Programme – Celebrating your hard work and achievements throughout the year, • Career Development – Ongoing training, clear progression paths, and opportunities to grow within the business A Little More About Clymac At our core, we are a small, regionally focused business that prides itself on delivering a bespoke and reactive service. Our clients receive undivided attention and dedication, ensuring their needs are met with precision and care. Yet, we have the luxury of being part of a larger group of businesses within the Fire Protection, Security, and Building Management Systems industry. This connection allows us to share best practices, access learning and development academies, and benefit from Human Resource specialists and industry knowledge. This synergy ensures we are constantly improving and staying ahead in the critical service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Clymac, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Senior Mechanical Engineer to join our growing Water Solutions team, with flexibility to be based in St Albans, Croydon, Basingstoke, London, Bristol, Cardiff, Exeter, or Plymouth. In this role, you’ll play a key part in delivering multi-billion-pound capital programmes across the UK water sector, contributing to projects ranging from small rural sites to complex, multi-million-pound infrastructure and non-infrastructure schemes in both water and wastewater. These long-term frameworks extend through AMP8 and AMP9, offering security, variety, and the opportunity to make a real impact in shaping sustainable water solutions. You will contribute to several major frameworks, including: Key Programmes You’ll Support: • Southern Water – £3.7 billion Capital Delivery Programme:, • Strategic Delivery Partner (SDP) Frameworks: Supporting Tier 1 Contractors on: • Lot 1: Non-infrastructure water projects, • Lot 2: Non-infrastructure wastewater projects, • Low Complexity Delivery Route & SDP Lot 3 Infrastructure Frameworks: Partnering exclusively with Tier 1 Contractors to deliver high-quality wastewater infrastructure projects. • South West Water – Engineering Consultancy Services Framework:, • Lot 3 – Multi-Discipline Engineering Design, • Wessex Water – Capital Delivery Partner Framework:, • Lot 2 – Design Consultants As part of a growing multi-disciplinary team with a long-standing presence in the region, you’ll be joining a group recognised for excellence, having won the IChemE Global Water Award 2023. You’ll have opportunities to develop your technical career not only through involvement in local projects but also by contributing to flagship initiatives across the UK&I and globally. With flexible working from our locations, you’ll collaborate across multi-disciplinary teams to deliver innovative and sustainable solutions. As part of AECOM, you’ll engage in impactful projects from inception through to delivery, enhancing the environment and supporting communities. Here's what you'll do: • Producing feasibility studies, outline design, detailed design and construction support., • Producing design drawings, mechanical plant selection and specification., • Liaising and collaborating with our water and other discipline teams including civil, electrical, process and mechanical engineers nationwide., • Deliver a high calibre of technical quality, contribute to bids, interface with clients and collaborators in design and planning., • Deliver to agreed budget, programme and quality along with supporting the preparation of project budget & programme., • Responsible for the design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc., • Site visits to carry out site surveys and the support of liaisons with clients, contractors & suppliers., • Producing plant layouts, technical specifications, Wimes datasheets, valve schedules, equipment schedules, lifting strategies and P&IDs, • Producing pumping stations designs, headloss calculations and pumping system analysis / pump selection If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • A degree (or equivalent) in Mechanical Engineering., • Progress towards Chartered Engineer status with a relevant institution, such as IMechE., • A proven ability to deliver engineering designs, reports, drawings, technical specifications, and calculations with confidence and precision., • Hands-on experience in delivering innovative solutions for water and wastewater engineering projects. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to help lead a team of talented engineers and help us shape the future of water infrastructure? Join our dynamic and multidisciplinary Water team as a Senior Electrical Engineer in our rapidly growing Glasgow office, whilst also taking advantage of our flexible hybrid working model. At AECOM, we’re at the forefront of innovation, delivering an exceptional portfolio of water programmes and projects through long-term partnerships with contractors and key clients – such as Thames Water, Scottish Water, Wessex Water, Welsh Water and Severn Trent Water. This role presents a great opportunity to develop your career as a technical expert delivering solutions on a diverse range of projects that meet the technical challenges of today and tomorrow. Here’s what you’ll do: • Electrical and ICA Design: Undertake the design and review of electrical and ICA elements in wastewater and water infrastructure treatment projects, such as chemical dosing, pumping stations and sludge treatment units, from conception to handover., • Quality: Produce and review client deliverables, including calculations, drawings and technical reports to relevant standards and procedures., • Project Management: Assist in the preparation and management of bids using internal systems and operations., • Mentor: Delegate tasks, direct and oversee the work of others and act as a technical mentor to more junior staff. If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 670 experts across the UK & Ireland, with an immediate team of 9 Mechanical & Electrical engineers in Glasgow.. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. At AECOM, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. And let's not forget about the perks at AECOM. You'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • BEng or MEng in Electrical Engineering., • Experience in the design of water and wastewater engineering deliverables with multi-disciplinary knowledge, ideally including treatment schemes., • Experience of managing projects, delegating tasks and technical mentoring., • Chartered (or near Chartered) Member of a relevant Professional Institution. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn – Katie Scales. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Start here. Grow here. Are you ready to help lead a team of talented engineers and help us shape the future of water infrastructure? Join our dynamic and multidisciplinary Water team as a Senior Electrical Engineer in our rapidly growing Glasgow office, whilst also taking advantage of our flexible hybrid working model. At AECOM, we’re at the forefront of innovation, delivering an exceptional portfolio of water programmes and projects through long-term partnerships with contractors and key clients – such as Thames Water, Scottish Water, Wessex Water, Welsh Water and Severn Trent Water. This role presents a great opportunity to develop your career as a technical expert delivering solutions on a diverse range of projects that meet the technical challenges of today and tomorrow. Here’s what you’ll do: • Electrical and ICA Design: Undertake the design and review of electrical and ICA elements in wastewater and water infrastructure treatment projects, such as chemical dosing, pumping stations and sludge treatment units, from conception to handover., • Quality: Produce and review client deliverables, including calculations, drawings and technical reports to relevant standards and procedures., • Project Management: Assist in the preparation and management of bids using internal systems and operations., • Mentor: Delegate tasks, direct and oversee the work of others and act as a technical mentor to more junior staff. If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 670 experts across the UK & Ireland, with an immediate team of 9 Mechanical & Electrical engineers in Glasgow.. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. At AECOM, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. And let's not forget about the perks at AECOM. You'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • BEng or MEng in Electrical Engineering., • Experience in the design of water and wastewater engineering deliverables with multi-disciplinary knowledge, ideally including treatment schemes., • Experience of managing projects, delegating tasks and technical mentoring., • Chartered (or near Chartered) Member of a relevant Professional Institution. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn – Katie Scales. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Senior Electronics Engineer Location: Hybrid (Office days in Coventry) Salary: £55,000 – £70,000 (depending on experience) We are hiring on behalf of one of our clients in the Coventry area for an exciting opportunity as a Senior Electronics Engineer. If you have a passion for innovative product development and a strong background in electronic design, we’d love to hear from you! As a Senior Electronics Engineer, you will experience in the end-to-end development of low powered devices. About the Role: As a Senior Electronics Engineer, you will play a key role in the end-to-end development of a wide range of products — from well-known consumer goods and advanced transport solutions to safety-critical devices. You'll collaborate closely with designers, mechanical engineers, and software developers to create cutting-edge products from concept to production. Key Responsibilities: • Lead the design and development of new electronic and electromechanical products., • Develop product specifications, technical documentation, and test protocols., • Design system architectures, including hardware/software partitioning., • Conduct feasibility studies and investigate emerging technologies., • Create and review analogue and digital electronic circuit schematics., • Oversee and manage PCB layout design and development., • Support multiple projects simultaneously with strong organizational skills., • Provide technical guidance to multidisciplinary teams and mentor junior electronics engineers. About You:, • Minimum 3 years' experience as a hardware design engineer., • Proven expertise in both analogue and digital electronic design., • Strong background in schematic capture and PCB design oversight., • Ability to lead projects from initial concept through to final product launch., • Experience working on multidisciplinary electronics projects is highly desirable.

Sales Engineer, Wind, Oil & Gas, Metals, remote position based in UK Astrantia Talent is recruiting exclusively for a highly innovative and technologically oriented globally operating business, committed to provide their customers with high-performance sealing solutions. The company not only has an extensive research and development department, but also in-house testing facilities where new designs and customer-specific material mixtures are further developed. Headquarters are located in the US with additional locations in Germany and Austria. Responsibilities: • Responsibility for a defined customer base, acquiring new customers in the wind, metal and oil & gas sectors throughout UK, • Independently develop medium and long-term customer strategies, • Conduct active contract and price negotiations with customers, • Part of customers' commercial and technical projects, also as project manager if required, • Contact person for complaints etc., • Responsibility for active observation and the exchange of technical trends Requirements • Technical degree in mechanical engineering or plastics technology or a comparable qualification, • Initial experience in the sale of complex technical products or alternatively have experience as a design engineer or application consultant in the technical field, • Strong in implementation, customer-oriented and a sense of urgency, • Analyze and evaluate complex technical topics, • An appropriate degree of persuasiveness, motivation and assertiveness, • Written and spoken German and English language skills, • Willingness to travel, • Good and friendly interaction with colleagues, • Independent, responsible and reliable way of working For more Information contact: Jenny Böhnlein Email: Jennyboehnlein@astrantiatalent.com Phone: +44 7341 890463

Are you an experienced Mechanical Projects Manager looking for your next challenge? Our client, a specialist building firm in the commercial sector, is seeking a talented individual to join their team. With a focus on delivering high-value projects, this role offers an exciting opportunity to oversee multiple live projects across the UK. What is The Job Doing: As a Mechanical Projects Manager, you'll be at the heart of the action: • Take charge of projects from the moment a tender is won through to completion and final account., • Oversee two live projects at any one time, each averaging a value of around £2 million., • Manage procurement processes and maintain strong relationships with long-standing subcontractors., • Lead and manage the site team to ensure smooth project execution., • Ensure projects are delivered on time and within budget., • While the primary focus is on the mechanical side, some responsibility for the electrical aspects will also be required., • Projects are UK-wide, often along the M4 corridor, with occasional fully expensed overnight stays. What Experience Do I Need To thrive as a Mechanical Projects Manager, you should have: • Proven experience in managing mechanical projects., • Strong procurement skills and the ability to manage subcontractors effectively., • Experience in leading site teams and delivering projects on time and within budget., • Willingness to travel across the UK and stay overnight when necessary., • A good understanding of both mechanical and electrical project requirements. Our client is a specialist building firm with a strong reputation in the commercial sector. They are known for their expertise in delivering high-quality projects across the UK, often focusing on areas along the M4 corridor. If you're a Mechanical Projects Manager ready to take on an exciting role with a leading specialist building firm, this opportunity could be perfect for you; offering the chance to work on significant projects, this role offers both challenge and reward. If you're interested in roles such as Project Manager, Mechanical Engineer, Construction Manager, Site Manager, or Electrical Projects Manager, this position as a Mechanical Projects Manager might be just what you're looking for.Coburg Banks Limited is acting as an Employment Agency in relation to this vacancy.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Principal Mechanical Engineer to join our growing Water Solutions team, with opportunities to be based across our England & Wales offices. In this role, you’ll play a key part in delivering major UK water utility investment programmes, supporting the design and delivery of projects that range from small rural sites to multi-million-pound infrastructure and non-infrastructure schemes. These frameworks are long-term and extend through AMP8 and AMP9, giving you the chance to contribute meaningfully to sustainable water solutions across multiple regions. You will support the delivery of several high-value capital programmes, including: • South West Water – Framework for Engineering Consultancy Services: Lot 3 - Multi-Discipline Engineering Design • Wessex Water – Capital Delivery Partner Framework Agreement: Lot 2 - Design Consultant • Severn Trent Water – Lot 1 Major Projects Framework: Supporting AMP8 delivery plan valued at a TotEx of £14.9 billion • Severn Trent D&B Projects – Supporting Tier 1 contractors on major non-infrastructure wastewater schemes, • Southern Water Strategic Delivery Partner (SDP) Frameworks:, • Lot 1: Non-infrastructure water projects, • Lot 2: Non-infrastructure wastewater projects, • Southern Water Low Complexity and Infrastructure Frameworks:, • Lot 2: Wastewater Infrastructure, • Lot 3: Infrastructure Framework – Partnering exclusively with Tier 1 contractors to deliver efficient and sustainable water and wastewater solutions Working flexibly, you’ll visit client sites and collaborate with teams across multi-year frameworks. As part of our thriving business, you’ll take on rewarding multi-disciplinary projects from inception to delivery, creating innovative solutions that enhance the environment and improve communities. Here's what you'll do: • Develop feasibility studies, outline and detailed designs, and provide construction support., • Create design drawings, select mechanical plant, and prepare technical specifications., • Collaborate with multidisciplinary teams, including civil, electrical, process, and mechanical engineers., • Ensure high technical quality, contribute to bids, and maintain client relationships., • Manage project budgets, schedules, and deliverables to meet agreed targets., • Design mechanical installations for water and wastewater systems, including pumps, screens, valves, and odour control., • Conduct site surveys and liaise with clients, contractors, and suppliers., • Produce layouts, technical specifications, datasheets, and P&IDs for system designs. As well as providing innovative and industry leading MEICA solutions to Clients, the team also collaborates with a wide variety of disciplines from other offices in delivering projects, including a close working relationship with our Enterprise Capabilities centres in India, South Africa and Romania. Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • A degree in Mechanical Engineering with Chartered Engineer status (or working towards it) through a recognised institution like IMechE., • Proven expertise in producing, reviewing, and approving engineering reports, designs, drawings, and specifications., • A problem-solver at heart—confident in taking ownership of challenging technical issues and seeing them through to resolution., • Strong coordination skills, ensuring the quality and consistency of deliverables produced by the wider team., • Leadership potential—able to manage direct reports, inspire technical excellence, and support the growth of fellow engineers., • Exceptional client and stakeholder engagement skills, with experience in team leadership, mentoring, and line management., • Experience in the water and/or wastewater industry. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Principal Electrical Engineer to join our growing Water Solutions team in Bristol, Cardiff, Exeter, or Plymouth. In this role, you’ll play a key part in delivering South West Water's and Wessex Water's £8 billion capital programmes. These projects span from small rural sites to multi-million-pound schemes and cover both water and wastewater (Infrastructure and Non-Infrastructure). The frameworks are long-term, extending through AMP8 and AMP9. You’ll contribute to two major frameworks as part of this investment: • South West Water: Framework for Engineering Consultancy Services - Lot 3 - Multi-Discipline Engineering Design., • Wessex Water: Capital Delivery Partner Framework Agreement - Lot 2 - Design Consultants. As part of a growing multi-disciplinary team with a long-standing presence in the region, you’ll be joining a group recognised for excellence, having won the IChemE Global Water Award 2023. You’ll have opportunities to develop your technical career not only through involvement in local projects but also by contributing to flagship initiatives across the UK&I and globally. With flexible working from our South West & Wales locations, you’ll collaborate across multi-disciplinary teams to deliver innovative and sustainable solutions. As part of AECOM, you’ll engage in impactful projects from inception through to delivery, enhancing the environment and supporting communities. Here's what you'll do: • Electrical and ICA Design: Undertake the design and review of electrical and ICA elements in wastewater and water infrastructure / treatment projects, and offer advice, where necessary in a technical expert role, • Quality: Produce and review client deliverables, make key technical decisions and identify when specialist input from the greater team is required, • Project Management: Prepare and manage the production of key packages of work using internal systems and operations, and assess design resources within the discipline, • Specification: Prepare technical specification, • Collaborate: With client and AECOM counterparts to ensure stakeholder buy in to solutions, also contributing to AECOMs wider technical capability and innovative approach, • Mentor: Delegate tasks, direct and oversee the work of others and act as a technical mentor to more junior staff If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Proven design experience in managing the technical delivery of large-scale water engineering projects with multi-disciplinary knowledge, • Strong collaboration and coordination skills between teams, clients and stakeholders, • BEng or MEng in a related engineering field with experience in water and wastewater treatment, • Chartered Member of a relevant Professional Institution We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Job Title: Field Service Engineer Industry: Machinery Manufacturing (CNC Machinery) Salary: Up to £45,000 base salary, Overtime and company bonus also available Package: Overtime, Company bonus, Car, Expenses, Progression within a market leader Location: Within 1hr of Telford – nationwide travel Company Overview: This business is a global leader in the manufacturing, commission, service, and maintenance of CNC Machines, although mainly specialising in 5 axis. They serve industries such as Aerospace, Automotive, Woodworking, Sheet Metal, and Composites. This is an excellent opportunity for an experienced CNC Service Engineer to work and progress for a true market leader. Role & Responsibilities: • Provide field-based service support for CNC machining centres, primarily working independently with occasional team collaboration., • Adapt to a varied and dynamic workload in a permanent, stable role, • Routine maintenance and servicing of CNC machines, predominantly 5-Axis, • Mechanical and electrical repairs, • Root cause analysis, fault finding, and troubleshooting About You/Required Experience • Proven field service experience in 5-axis CNC milling and routing machines, • An understanding of 5-axis programming for milling, routing, drilling, and trimming applications, • Knowledge of Step 7 PLC Setting, • Some experience of CAD/CAM programming would be a plus, • Please note, this is not a Programmer or Operator role, this is for a Field Service Engineer to install, maintain, and service the machines

Our Mission At Vertical Aerospace, we are pioneering the way for electric aviation. The VX4, our eVTOL (electric, vertical, take-off and landing), 'zero emissions' aircraft will set a new safety standard for how we will navigate the sky. We won't realise our mission following the same legacy processes and traditions our predecessors followed; instead, we want to 'redefine' aerospace best practices. We are growing quickly from a prototype business to a scaling SME, and the next few years will be critical to our success and delivering on our ambitious goals of having the VX4 in service by 2030. What to Expect As a Senior Structural Test Analysis Engineer, you will join our expanding Test Team as our novel aircraft development programme advances. Your role will be pivotal in delivering critical data through component, sub-system, and full-scale tests to support design development and certification. A typical day could involve leading complex structural test rig projects for prototype and certification testing, developing test assets from conception to operation, or mentoring junior engineers while driving innovation in instrumentation and test monitoring. You'll operate across our Bristol office, Kemble Test Facility, and with flexibility for home working when appropriate. What You'll Do You will plan and execute structural test campaigns, including development and certification activities for our VX4 aircraft programme. You will lead integration and operation of advanced DAQ and control systems, with particular focus on MTS and LabVIEW platforms. You will design and review instrumentation strategies including strain gauge placement, rosette configurations, and ensure understanding of signal conditioning principles. You will ensure precise load measurement practices with deep understanding of load cells, calibration, and behaviour under varying test conditions. You will lead rig commissioning, safety reviews, and test result interpretation to support design development and certification requirements. You will build collaborative relationships across Structures, Design, and Systems teams to define test needs and drive planning and delivery of rigorous structural tests. You will oversee rig design, instrumentation plans, calibration procedures, and DAQ setup from component-level coupons to full-vehicle trials. You will manage test execution and data validation, ensuring traceability for certification and proactively improving processes for data quality, test repeatability, and system monitoring. You will train and support junior engineers and technicians in instrumentation and test methodology. What You'll Bring Degree in Mechanical / Aerospace Engineering (Master's level preferred). 10+ years experience in aerospace test engineering or equivalent structural test environment. Advanced knowledge of DAQ and control systems, ideally MTS, LabVIEW, and similar platforms. Proven experience with instrumentation setup, including strain gauge application, wiring best practices, bonding techniques, and troubleshooting. Understanding of load cell behaviours, sensitivity, hysteresis, and calibration principles. Strong analytical skills, with ability to lead monitoring setups for real-time test safety and signal integrity. Hands-on experience in both developmental and certification test programmes. Strong written and verbal communication skills, including technical report writing. Capable of working cross-functionally and managing multiple priorities effectively. Desired Proven leadership in delivering structural test activities in a certification context (EASA/FAA). Familiarity with strain gauge rosette analysis, Wheatstone bridge configurations, and noise mitigation techniques. Knowledge of calibration traceability and uncertainty calculations. Practical familiarity with mechanical assembly of test rigs and prototype structures. Experience with data post-processing tools (e.g., nCode, MATLAB). Working knowledge of 3D CAD (Catia V5 or 3DEXPERIENCE preferred). What can you expect from us? We're on a mission. Where others see limits, we see opportunity, and we work at pace. Working at Vertical isn't your average role but for those seeking a challenge, a flexible, supportive organisation and an incredible team; working here is an opportunity to do the best work of your career. Our approach promotes ingenuity and courage, while our environment builds success through diligence in safety and being open in the way we work. The only way we're going to assure the next chapter of aviation history is by working as a team, relentlessly, towards our goal. Our benefits Our people matter - we're not going anywhere without them. Which is why our company benefits go beyond the essentials. 26 days holiday, plus bank holiday 5 extra days per year to buy (or sell) 5 extra days holiday when you get married or enter a civil partnership Additional 4% of your salary to spend on extra benefits Award-winning digital health and wellbeing service (Help@Hand) Company performance based bonus - rewarding company and individual performance Company Share Scheme - open to every Vertical employee Company Pension Scheme - 5% and we match it Breakfast on us, every day We may just be the hardest job you've ever had, but we're confident it will be the most rewarding. Join the team today and help us shape the future of Advanced Air Mobility. Disclaimer Statement We encourage you to apply even if you may not have all the experience listed in the advert. We recognise that talent comes in various forms and we are committed to providing opportunities that create an environment of growth, diversity, and inclusion for everyone. As part of our desire to review and make our processes fair, we may ask you questions related to these aspects during the application process. For more information on how we will use your data, see our Legal section.

Service Engineer - Automotive Equipment £28-30k Basic + Bonus (typically upwards of £350 per month) + Company Van + Pension + Healthcare + Tax-free lunch allowance of £5 per day + Monday to Friday working Location: Field-based - Southern UK Ideal locations include Milton Keynes, Luton, Oxford, Banbury, Cheltenham, Gloucester, Reading, Swindon, High Wycombe, Slough, Newbury, Bath, Bristol, Chelmsford, Basildon, Colchester, Ashford, Maidstone, Tonbridge. Join a market-leading automotive equipment brand as a Service Engineer - enjoy premium training, a family-feel team, and the security of a global leader. An exciting opportunity has arisen for an experienced Service Engineer with knowledge of Mechanical, Electrical and Hydraulic engineering to join a market-leading and highly respected brand supplying premium capital equipment to the automotive sector. Renowned as the UK's number one in their field, this company boasts a long-standing team, a well-established client base, and a strong pipeline of future business. This is the ideal role for an experienced field-based service engineer who is comfortable in a customer facing role that requires you to think on your feet and actively solve problems. Whether you're from a bodyshop equipment or garage tools, or technical capital equipment background across agricultural, construction, off-highway, marine, mining and commercial vehicle…we'd love to hear from you! An absolute must for this role is the ability to travel throughout the South of England with overnight stays, flexibility is essential for this role. In return, you will be joining a Global business, the UK team has a family-feel where your contribution is genuinely valued. The Role: • Driving the servicing and calibration needs, installations and support of equipment through visiting customer's locations throughout Southern England., • Execute and develop service and sales needs and opportunities in the UK Market., • Product and solution demonstrations in cooperation with the Technical Sales Representative., • Installation of equipment and start-up training to deliver customer satisfaction., • Undertake service, warranty and calibration activities according to service bulletins and instructions., • Administration of service activities, update the CRM system and engage fully in regular internal meetings., • Actively work to increase the service, training and repair business potential at the customer's site. The Candidate: • Competent experience within mechanical and electronic and hydraulic engineering., • A proven background in a service engineer role, ideally this will be field based., • Our ideal candidate will have good technical knowledge of the collision repair industry and car manufacturing requirements; however, we are open to candidates that have a service background in allied sectors such as capital equipment, agricultural, construction, off-highway, marine, mining and commercial vehicle., • Sound understanding of health and safety requirements around the workplace., • Customer focussed and able to deliver on promises., • Hold a full UK driving license., • Personal situation that allows extensive travel within the UK. Personal Attributes: • Self-motivated, self-learner, driven by RCI (Rapid continuous improvement)., • Self-driven, with the ability to organise yourself to meet logistical challenges, efficiency needs, effective in time management and able to work to deadlines., • Good organisational skills., • Ability to represent the Brand in a positive way, according to our values and ethics., • First-class attention to detail with the desire to provide premium customer service. Apply in Confidence: To apply for this Service Representative (Mechanical, Electrical and Hydraulic) role, please send your CV to Kayleigh Bradley, Senior Recruiter at Glen Callum Associates Ltd. For a confidential chat, call Kayleigh directly on . Job Reference: 4288KB Service Engineer - Automotive Equipment

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Mechanical Engineer to join our growing Water Solutions team, with flexibility to be based in St Albans, Croydon, Basingstoke, Bristol, Cardiff, Exeter, or Plymouth. In this role, you’ll play a key part in delivering multi-billion-pound capital programmes across the UK water sector, contributing to projects ranging from small rural sites to complex, multi-million-pound infrastructure and non-infrastructure schemes in both water and wastewater. These long-term frameworks extend through AMP8 and AMP9, offering security, variety, and the opportunity to make a real impact in shaping sustainable water solutions. You will contribute to several major frameworks, including: Key Programmes You’ll Support: • Southern Water – £3.7 billion Capital Delivery Programme:, • Strategic Delivery Partner (SDP) Frameworks: Supporting Tier 1 Contractors on: • Lot 1: Non-infrastructure water projects, • Lot 2: Non-infrastructure wastewater projects, • Low Complexity Delivery Route & SDP Lot 3 Infrastructure Frameworks: Partnering exclusively with Tier 1 Contractors to deliver high-quality wastewater infrastructure projects. • South West Water – Engineering Consultancy Services Framework:, • Lot 3 – Multi-Discipline Engineering Design, • Wessex Water – Capital Delivery Partner Framework:, • Lot 2 – Design Consultants With flexible working from our locations, you’ll collaborate across multi-disciplinary teams to deliver innovative and sustainable solutions. As part of AECOM, you’ll engage in impactful projects from inception through to delivery, enhancing the environment and supporting communities. Here's what you'll do: • Preparing feasibility studies, outline design, detailed design and construction support., • Producing design drawings, mechanical plant selection and specification., • Liaising and collaborating with our water and other discipline teams including civil, electrical, process and mechanical engineers nationwide., • Preparing design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc., • Site visits to carry out site surveys and the support of liaisons with clients, contractors & suppliers., • Producing plant layouts, technical specifications, Wimes datasheets, valve schedules, equipment schedules, lifting strategies and P&IDs, • Producing headloss calculations and pumping system analysis / pump selection If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • A degree (or equivalent) in Mechanical Engineering., • Progress towards Chartered Engineer status with a relevant institution, such as IMechE., • A proven ability to deliver engineering designs, reports, drawings, technical specifications, and calculations with confidence and precision., • Hands-on experience in delivering innovative solutions for water and wastewater engineering projects. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Business Development Manager (HVAC) Birmingham (Remote) £40,000 - £50,000 (OTE £60,000) + Remote + Training + Commission + Company Vehicle + Benefits Are you a Business Development Manager from a technical or construction background looking for a varied, hands-on role with strong earning potential, full training, and a company vehicle, at a growing business where you'll play a key part in driving expansion? On offer is the chance to join a well-established company with over 30 years of experience in the ventilation industry. You'll be part of a trusted and growing business that works on a wide variety of projects, from private homes to large commercial buildings. The company specialises in modern ventilation systems like MVHR and PIV, giving you the opportunity to work with in-demand technologies while gaining valuable industry knowledge and long-term career stability This is a varied role where you will be responsible for identifying and proactively securing new clients, managing existing relationships, attending industry events, and working with building consultants throughout Great Britain. You will be expected to develop an in-depth understanding of the company's product range, provide technical guidance and demonstrations, and stay current with emerging technologies and market trends. This role would suit a Business Development Manager from a Technical or Construction background who is looking for a role with autonomy, full product training, and the opportunity to gain deep industry knowledge within a well-established and supportive company that values long-term development and career growth. THE ROLE • Ventilation Sales across residential and industrial sectors, • Full training on specialist systems including MVHR and PIV, • Client visits, relationship management, and technical demonstrations, • Monday to Friday, • Hybrid role with nationwide travel THE PERSON • Business Development Manager with a background in HVAC or similar, • Full UK Driving Licence Reference: BBBH19892B Keywords: Business Development Manager, HVAC, Ventilation, Technical Sales, Mechanical Engineering, MVHR, PIV, Construction, Sales Engineer, Birmingham, Hybrid, UK, Remote If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment provider for this permanent position. By applying for this job, you accept the T&Cs, Privacy Policy and Disclaimers which can be found on our website.

Semi-Skilled Maintenance Engineer - Hospital Environment.This is a role for a Semi-Skilled Maintenance Engineer supporting essential building services across a major hospital site.You'll help keep critical systems safe, compliant, and fully operational across electrical, mechanical, and fabric disci

JG251 – Forklift EngineerLocation: PeterboroughSalary: £30,000 - £37,500 + Overtime + BenefitsOverview:First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients.The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction.Our client strongly encourages applications from ex-military personnel however, all candidates will be considered.Duties and Responsibilities: • Servicing and repair of forklift trucks and other lifting equipment., • Carrying out routine maintenance., • Checking oil and fuel levels., • Checking all related hoses and connections., • Steering and brake checks., • Basic electrical checks – brake lights etc., • Liaising with customers regarding their individual requirements., • Submit accurate parts requisition information to Head Office., • Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: • A good mechanical engineering background is essential., • Customer focused., • Ability to work as part of a team or on an individual basis where required., • Ex...

Field Service Engineer - Compactors & Balers East of England - Ideally based in Peterborough, Corby, Grantham, Spalding or surrounding areas £38,000 - £39,000 + Overtime (OTE £45,000) + Company Vehicle + Benefits A well-established and growing environmental services business is looking to add an experienced service engineer to cover their regional East of England patch (no national travel & constant stayaways). This role is primarily focused along the A1 corridor. You'll be joining a team of 20+ Service Engineers, supporting a wide range of customers across multiple industries. This is an excellent opportunity for an engineer who has experience working on compactors and balers, or similiar Electrical/Mechanical/Hydraulic equipment. You'll be exposed to a variety of machine types, manufacturers, and customer environments, making this a varied and rewarding field-based position. The Role Service, maintenance and repair of compactors and balers Fault finding and breakdown response across customer sites Planned preventative maintenance and inspections Working on a wide range of equipment and machine types Covering a regional patch across the East of England The Candidate Previous experience working on compactors and/or balers is desirable Strong electrical and mechanical fault-finding skills Ability to work independently in a field-based role Full UK driving licence Customer-focused approach ...

Permanent Nights Continental Shift Pattern (flexible) Average 42 hours per week Company Overview Our client is a well-established food manufacturing business with a strong reputation for quality, innovation, and investment in both people and equipment. Operating from a modern production facility, they supply a range of products to major customers across the UK and continue to invest in their engineering function to support future growth. Due to continued expansion, they are now looking to recruit a Multi-Skilled Shift Engineer to join their night shift engineering team. Role Overview As a Multi-Skilled Shift Engineer, you will play a key role in ensuring the reliability and performance of a highly automated manufacturing facility. Working within a fast-paced production environment, you will be responsible for carrying out planned and reactive maintenance activities across a range of processing and packaging equipment. This position would suit an engineer with strong electrical and mechanical fault-finding abilities who enjoys working autonomously while contributing to wider continuous improvement initiatives. Experience with PLCs, inverters, and automated production equipment would be highly advantageous. Key Responsibilities Carry out planned preventative maintenance (PPM) activities across site equipment. Respond quickly and effectively to equipment breakdowns, diagnosing and resolving faults to minimise downt...

Maintenance Engineer Peterborough 4 on 4 off Days (Average 36 hour work week) Up to £50,000 23 Shifts Holidays Employee Assistance Program Healthcare Cashback Plan Discounts Platform Join a leading manufacturing business in Peterborough that's investing in growth and innovation. We're looking for a skilled Maintenance Engineer to support site operations and ensure machinery runs smoothly and efficiently. You'll be part of a collaborative engineering team, reporting to the Engineering Manager or Shift Lead, and working on a mix of planned maintenance (PPM) and reactive breakdowns across a fast-paced production environment. This company is passionate about developing its people-whether you're looking to expand your technical skillset or step into leadership, you'll be supported every step of the way. What You'll Need: 5+ years of engineering experience in a manufacturing setting Level 3 or higher qualification in an engineering discipline A proactive, team-oriented mindset Multi-skilled (mechanical or electrical bias) FMCG experience is a strong advantage If you're ready for a new challenge with a company that values its engineers and offers real career progression, apply now or get in touch for more info. Consultant: Jackson Code: INDENM If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with office...

Mechanical Design Engineer - Peterborough - 40/50k ALH Recruitment are looking to recruit a Mechanical Design Engineer position with immediate effect for our client who continue to grow and are based in the Peterborough area. This is an exciting new role to join the Engineering Design Team as a Design Engineer to support the demands of our clients growing business in liquid and powder process solution equipment. As an engineering solutions supplier to the food, beverage, brewery, bakery, dairy and utility industries throughout the UK, they are providing an opportunity to bring forward your own ideas. Reporting to the Processing Engineering Manager, you will work on small to major projects within a team of design engineers responsible for delivering cradle-to-grave design deliverables to the liquid & powder process & food industry in the UK. You will be responsible for ensuring your designs conform to all relevant UK standards and align to the high standards of the department. Role - responsibilities: • Maintain and amend existing designs., • Incorporate the principles of hygienic design within all aspects of your work., • Produce accurate technical drawings and designs for the engineering department, customers, and suppliers., • Produce and manage BOMs, ensuring all changes are recorded., • Perform mechanical design and development using SOLIDWORKS and autoCAD with a "Hands on" appro...

Maintenance Engineer | Peterborough | £46,000 + Benefits Are you a skilled Maintenance Engineer looking to join a global leader in the food industry? We're recruiting on behalf of a well-established FMCG business in Peterborough, where quality and production continuity are at the heart of everything they do. The Role Working as part of a close-knit maintenance team, you'll be responsible for both planned preventative maintenance (PPMs) and reactive maintenance across a busy, fast-paced production facility. You'll play a key role in keeping the lines running and ensuring the uninterrupted production of a wide range of great-tasting food products. Shift Pattern Rotating shifts, Monday to Friday: • 6:00am - 2:00pm, • 2:00pm - 10:00pm What We're Looking For • Dual-skilled: qualified to both mechanical and electrical level, • Proven experience in a fast-paced food, FMCG, or pharmaceutical manufacturing environment, • Comfortable carrying out both PPMs and reactive maintenance, • A team player who thrives under pressure and takes pride in their work What's On Offer • £46,000 per annum, • Competitive benefits package, • Monday to Friday only - no weekends, • The opportunity to be part of a global business with genuine stability and long-term career prospects If you're ready to bring your skills to a company that truly values its engineering team, we'd love to hear fr...

WELCOME TO LINAKER For over 30 years, Linaker has built a reputation for delivering dependable, high-quality mechanical engineering services across a wide range of client environments. Our strength lies in keeping critical systems operationalsupporting organisations with technical precision, responsive maintenance, and long-term reliability. Founded on trust, care, and reliability, were more than a service providerwere a fully embedded partner in our clients operations. ABOUT THE ROLE As an HVAC Engineer, you will be part of our National engineering team, responsible for delivering planned and reactive maintenance across a range of commercial and retail sites. You will ensure HVAC systems operate safely, efficiently, and in full compliance with statutory and client requirements. WHAT YOU WILL BE RESPONSIBLE FOR WITHIN YOUR SPECIFIED AREA Carry out PPM and reactive maintenance on HVAC systems including AHUs, FCUs, VRV/VRF, split systems, and chillers Fault finding, diagnosis, and repair of mechanical and electrical HVAC components Ensure work is completed in line with statutory compliance, SFG20, and company procedures Complete job documentation accurately via CAFM system Identify and report remedial works with clear technical detail Maintain van stock, tools, and plant Participate in call-out rota where applicable WHAT WE ARE LOOKING FOR NVQ Level 3 in Air Conditioning & Refrigeration / HVAC (or...

Junior Mechanical Design Engineer (AutoCAD) £30,000 - £35,000 + Progression + Training + Company Benefits + Early Finish Fridays Newark (Commutable from Nottingham, Mansfield, Lincoln) Do you have a background using AutoCAD? Are you looking for a junior role with a well-established manufacturing company who will give you industry training, a variety of interesting projects to work on and the opportunity to progress long-term? On offer is the opportunity to join an established company that have been in operation for over 40 years and have consistently grown due to working across lucrative sectors including defence, aerospace and manufacturing. They are responsible for the full product lifecycle, from conception to installation. This varied role, will see you responsible for drawing mechanical systems using AutoCAD 2D. You will be customer facing, providing solutions and expertise to assist in bringing their requirements to life and providing project timelines and handling any amendments. This is a Monday to Friday role, with an early finish on the Friday. This role would suit someone looking for a Mechanical Design position with a well-established business, who will provide training, progression and a variety of interesting customers to be involved with. The Role • Completing drawings using AutoCAD in 2D, • Communicating ...

JG251 – Forklift Engineer Location: Peterborough Salary: £30,000 - £37,500 + Overtime + Benefits Overview: First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients. The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction. Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: Servicing and repair of forklift trucks and other lifting equipment. Carrying out routine maintenance. Checking oil and fuel levels. Checking all related hoses and connections. Steering and brake checks. Basic electrical checks – brake lights etc. Liaising with customers regarding their individual requirements. Submit accurate parts requisition information to Head Office. Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: A good mechanical engineering background is essential. Customer focused. Ability to work as part of a team or on an individual basis where required. Excellent time management skills Excellent communication skills – both verbal and written. Experience with forklift trucks, military, agricultural or p...

Field Service Engineer - Compressed Air Systems - UK Wide - Based Commutable To Newark We are recruiting on behalf of our client for a Multi-Skilled Field Service Engineer to support customers across the UK. This is an excellent opportunity for a skilled engineer with a strong electrical and mechanical background looking for a varied field-based role with excellent earning potential and ongoing training. The Role The successful candidate will carry out planned preventative maintenance, fault finding, servicing, and repair work on specialist compressed air equipment at customer sites nationwide. This is a field-based role involving travel across the UK, with occasional overnight stays required but you must be commutable to Newark. Key Responsibilities • Diagnose faults and carry out repairs on rail depot and compressed air equipment, • Complete planned preventative maintenance (PPM) in line with OEM and company standards, • Service and maintain electrical and mechanical systems including:, • Pumps, • Compressors, • Vacuum systems