Trabajos welder en El Cajon, CaliforniaCrear alertas

Job Description Job Description This role involves performing TIG and MIG welding on a variety of assemblies, supporting a journeyman welder with fit-up and fabrication, and working from blueprints to produce high-quality welded components. You will work with exotic materials and various thicknesses while using fixtures, weld symbols, and proper documentation practices to ensure consistent, traceable results on-site in El Cajon, CA. Responsibilities • Perform TIG and MIG (GTAW and GMAW) welding on a wide range of assemblies according to engineering drawings and specifications., • Assist a journeyman welder with fit-up and fabrication tasks, including positioning and aligning components prior to welding., • Read and interpret blueprints, weld symbols, and travelers to determine welding requirements, materials, and sequence of operations., • Use fixtures and appropriate setup techniques to hold parts in place and maintain alignment during welding., • Operate hand grinders and related tools to prepare joints, clean welds, and finish welded components as required., • Weld exotic materials, including alloys, Inconel, and 300/400 series stainless steel, while following proper procedures for each material type., • Weld materials of different thicknesses, including .032, .060, .090, and .188, ensuring proper penetration and weld quality for each thickness., • Apply welding techniques using back gaps and other methods as specified to achieve strong, consistent welds., • Set up welding machines, including adjusting amperage and other parameters, to match the requirements of each job., • Document work accurately, including recording the type of rod used, weld type, materials, and other relevant details for traceability., • Identify materials correctly and record them on travelers or job documentation to ensure proper tracking and quality control., • Fabricate parts under supervision, following instructions and feedback to improve technique and efficiency., • Work on assigned jobs both within and adjacent to the welding field, contributing to related tasks as needed to support production. Essential Skills • Hands-on experience performing TIG and MIG welding on assemblies., • Proficiency in GTAW and GMAW welding processes., • Ability to read and interpret blueprints and weld symbols., • Experience using fixtures to position and hold parts during welding., • Skill in welding exotic materials such as alloys, Inconel, and 300/400 series stainless steel., • Ability to weld different material thicknesses, including .032, .060, .090, and .188., • Experience setting up weld machines, including amperage and other parameters., • Competence in operating hand grinders for weld preparation and finishing., • Ability to document work accurately, including recording rods used, weld types, and materials., • Capability to identify materials and record them on travelers or job documentation., • Willingness to work on assigned jobs inside and outside the core welding field., • Ability to fabricate parts under supervision and follow detailed instructions., • Ownership of a welding hood suitable for daily use. Additional Skills & Qualifications • Experience welding using back gaps and other specialized welding techniques., • Experience working with a variety of alloys and stainless steel grades in a production environment., • Familiarity with shop travelers and structured documentation processes., • Comfort working closely with journeyman welders and following guidance to refine skills., • Strong attention to detail and commitment to producing high-quality welds and fabrications. Why Work Here? You will join a production environment that values craftsmanship, consistency, and continuous learning, giving you the opportunity to refine your welding skills alongside experienced professionals. The schedule offers a concentrated workweek with long weekends built in, supporting a better work-life balance. You will gain exposure to exotic materials, varied thicknesses, and advanced welding techniques, helping you expand your technical capabilities and build a strong, versatile welding career. Work Environment This position is based on-site in El Cajon, CA, working primarily with TIG and MIG welding processes on exotic materials such as alloys, Inconel, and 300/400 series stainless steel. You will use welding machines, fixtures, hand grinders, and standard fabrication tools in a shop environment focused on precision and quality. The role follows a 1st shift weekend schedule, Friday through Sunday, from 5:00 a.m. to 5:30 p.m., with additional compensated hours to reach a 40-hour workweek. The environment emphasizes safe, organized, and documented work practices, with clear travelers and instructions guiding each job. Job Type & Location This is a Contract to Hire position based out of El Cajon, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Cajon,CA. Application Deadline This position is anticipated to close on Jul 31, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Dental insurance, • Vision insurance Responsibilities include diagnosing and repairing damaged vehicles, performing routine maintenance, and ensuring that all safety standards are met. Repair and replace damaged body parts. Perform welding and metal fabrication. Perform body work on vehicles, including sanding, grinding, and painting. Follow safety protocols when working with hazardous materials. Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged fenders, panels, and grills; and bolts or welds replacement parts in position and reassemble after parts are painted. Operate a variety of hand and power tools (e.g., welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.) Inspect and test drive repaired vehicles to check for compliance with safety and quality standards; Wash and prepare vehicles for customer return. Comply with all Auto Collision Group, Inc. safety rules, guidelines, and standards. Job Requirements Must be at least 18 years of age. Must have a valid drivers license. Must have 1-3 years of auto collision experience. Ability to read and understand instructions, written estimates, and work orders.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Opportunity for advancement, • Training & development Job Summary • Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc., • Lifting 50lb., • General power tool knowledge (angle grinders, drills, band saw, cold saw)., • Welding (MIG 0.035, Flux Core, Dual Shield 0.045)., • Loading and unloading trucks., • Basic knowledge on how to read a measuring tape., • 8-hour shift Monday to Friday., • Material stock check (shipping & receiving)., • Steel profiles & processes knowledge., • Forklift certification preferred., • Operating overhead crane & rigging., • Handles paperwork accurately and acquires all signatures per process. Education • Minimum education requirement: High School diploma or equivalent., • Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions., • Lift heavy objects up to 50 pounds., • Work in confined spaces, • Experience in structural steel environment (preferred). Depending on experience, you earn $20.00 - $22.00/hour.

Job Description Welder - Immediately Hiring - El Cajon, CA Job Description The Welder Fitter performs TIG and MIG welding on a variety of assemblies, supports a journeyman welder with fit-up and fabrication, and works from blueprints to produce high-quality welded components. This role operates in a hands-on fabrication environment, using fixtures and hand tools to weld and assemble parts made from exotic materials and various thicknesses. The position is based on-site in El Cajon, CA, four days per week. Open Shifts • First shift schedule 6:00 AM to 4:30 PM (Mon-Thurs), • Second shift schedule 4:00 PM to 2:30 AM(Mon-Thurs), • Weekend schedule 5:00 AM to 5:30 PM (Fri-Sun)Responsibilities, • Perform TIG (GTAW) and MIG (GMAW) welding on assemblies according to drawings and specifications., • Read and interpret blueprints, weld symbols, and fabrication drawings., • Assist with fit-up, fabrication, and assembly of components to required tolerances., • Set up and operate welding equipment and use fixtures, jigs, grinders, and other fabrication tools., • Weld stainless steel, Inconel, and other alloys while maintaining high quality standards., • Complete required production and traceability documentation., • Follow all safety procedures and maintain a clean work area., • Support other fabrication and production activities as needed.Required Qualifications, • Experience with TIG and MIG welding., • Ability to read blueprints and fabrication drawings., • Experience with fit-up, fixtures, and common fabrication tools., • Strong attention to detail and commitment to quality., • Ability to work safely in a manufacturing environment., • Must provide own welding hood and gloves; all other PPE is provided.Preferred Qualifications, • Experience working in a custom fabrication or manufacturing environment., • Experience welding stainless steel, Inconel, or other specialty alloys., • Familiarity with specialized welding techniques and procedures. Why Work Here? • You join a hands-on fabrication environment where you work with advanced materials and develop your welding skills alongside experienced professionals. The schedule offers a four-day on-site workweek, supporting work-life balance while still providing meaningful, technical work. You gain exposure to a variety of projects and processes, helping you build a strong foundation in both welding and fabrication practices. Environment: • The environment involves the regular use of TIG and MIG welding equipment, welding machines, fixtures, and hand grinders, as well as handling exotic materials such as alloys, Inconel, and 300/400 series stainless steel in various thicknesses. You work around typical shop noise, tools, and equipment, following standard safety practices and using appropriate personal protective equipment, including your own welding hood.Job Type & Location This is a Contract to Hire position based out of El Cajon, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Cajon,CA. Application Deadline This position is anticipated to close on Aug 1, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Training & development Are you a highly skilled and experienced welder/fabricator with a knack for leadership? Do you thrive in a dynamic environment, guiding a team to produce high-quality metal components and structures? If so, we want to hear from you! We are seeking a dedicated and motivated Welding Fabricator Lead Man to oversee our fabrication operations and ensure projects are completed efficiently, safely, and to the highest standards. About Us: We are a family-owned steel fabrication shop specializing in custom metalwork for commercial, industrial, and residential clients. With a commitment to quality, we take pride in delivering exceptional results. Responsibilities: • Lead, mentor, and train a team of skilled welders and fabricators., • Plan, assign, and direct daily welding and fabrication tasks to meet production schedules and deadlines., • Interpret blueprints, engineering drawings, and specifications to ensure accurate fabrication and assembly., • Perform various welding techniques (MIG, TIG, Arc, etc.) on different materials (steel, stainless steel, aluminum, etc.)., • Fabricate and assemble metal parts, brackets, and structures according to required dimensions and tolerances., • Conduct quality control inspections of finished products, ensuring adherence to quality standards and specifications., • Monitor project progress, track milestones, and report weekly updates to management., • Identify opportunities for process enhancements and efficiency improvements within the fabrication shop., • Ensure all safety protocols and procedures are strictly followed, maintaining a safe and organized work environment., • Estimate time and material costs for custom fabrication projects., • Operate and maintain a variety of welding and fabrication equipment, including torches, power supplies, saws, grinders, and other machine shop tools., • Troubleshoot and repair equipment as needed. Qualifications: • Proven experience as a welder/fabricator, with at least 3+ in a lead or supervisory role., • Expertise in various welding processes (MIG, TIG, Stick, Flux-Core, etc.) and ability to work with diverse metals., • Strong ability to read and interpret complex blueprints, technical drawings, and welding symbols., • Proficient in using measuring devices such as calipers, micrometers, and depth gauges., • Excellent knowledge of metal fabrication techniques, including cutting, shaping, bending, and assembly., • Demonstrated leadership skills, with the ability to motivate, train, and manage a team effectively., • Strong problem-solving abilities and attention to detail., • Commitment to maintaining a safe work environment and adhering to all safety regulations., • Ability to lift and move heavy objects (50+ lbs.) and stand/be active for extended periods., • Strong communication and interpersonal skills., • Valid driver's license (if applicable for occasional travel or material pick-up). Preferred (but not required): • Experience with CNC cutting machines., • Familiarity with lean manufacturing principles. Benefits: • Competitive salary based on experience and qualifications., • Opportunities for professional development and growth., • A supportive and collaborative team environment. To Apply: Please fill out application and we will be in contact with you. PCIW Steel Corp is an Equal Opportunity Employer.

You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.

Combination pipe and structural welders with experience on marine vessels and associated systems preferred. The selected Welder** candidate will support PM, working closely with our skilled trades teams, on active class surface ships, submarines, and shore-based facilities using various welding proc

Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies.Performs other related tasks as assigned, some of which may become essential to the position.Previous experience or training is required.Must be able to qualify in

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. To receive priority consideration, the FPL must be the same grade level or equiva

Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA.Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines.Join the top team on the waterfront, working for unrivaled comp

AUTHORITIES / RESPONSIBILITIES:.Understand directions and follow instructions.Accountable for completion of daily work assignments including the completion and signatures for work completion and quality.Maintains cleanliness and organization on assigned job sites.Performs grinding and joint preparat

Epsilon Systems Solutions, Inc.Graving Dock Pipefitter Welder II in San Diego, CA.Performs various welding processes to repair, for fabricating, installing, and maintaining piping systems and welded structures foundations and fittings associated with Graving dock floating dry dock hydraulic, pneumat

SUPERSTAR FABRICATOR / WELDER WANTED**.

Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA.Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines.Join the top team on the waterfront, working for unrivaled comp

NSC Staffing is seeking Tig Welders with 2-5 years of experience for an exciting project in San Diego. If you are a certified welder ready for your next challenge, apply today!. We seek a detail-oriented, outgoing, dependable Marine Tig Welder for an established Marine and Industrial Repair Company.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Salary is based on geographical location and is subject to change with the annual

REPORTS TO: Production Supervision Overall purpose of job: To work within a team of Pipe Fitters and welders to achieve maximum production in minimum time, standards and quality in keeping with company policies, while maintaining a positive and motivated team environment. SUMMARY To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the minimum knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and the ability to follow directions. The individual must possess experience in the trade and knowledge of ship terminology. The individual must demonstrate ability to interpret job specifications and perform work on marine vessels. Must be able to follow directions and work with limited supervision. Also, must be willing to develop other team members' skill level. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include but are not limited to the following: • Read and interpret basic drawings and weld symbols., • Pass weld test for all Austal USA weld procedures in the 6GR position, • Pass Austal USA TIG weld test procedure for aluminum pipe, • Must be able to perform P1 welds and maintain associated documentation, • Ability to work to Austal Tig Welding standards, • Work to Austal housekeeping procedure, • Inspection of work, identification of potential problems, initiation of corrective actions., • Increase awareness of Quality procedures within department, • Perform as a productive working team member that meets daily goals set by the supervisor., • Continuously improve communications and flexibility within the team., • Help build the team environment., • Build pride of workmanship and quality through on job training., • Contribute towards innovation / productivity improvements., • Assist in the control of waste elimination, e.g. materials, consumables etc., • Assist supervisor to maintain control of department equipment and its maintenance., • Must have full set of personal tools, • Work towards the team goal of delivering the vessel on time., • Always be ready to start shift on time, • Follow Austal guidelines and procedures, • Do not leave job early or return late from break times, • Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage, • Performs and executes work in compliance with NAVSEA STD Items, • Must be able to travel to off-site work locations, • Must follow Austal Off-Site Temporary Assignment Policy (SUP270) EDUCATION and/or EXPERIENCE • 1 year minimum work experience as a B-class pipe welder at Austal or 2 years experience in similar role at comparative employer., • Ability to pass "A Class" skills validation test to demonstrate welding ability for restricted open root welds, • Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel and stainless steel to meet contract requirements for A Class welding on the vessel LANGUAGE SKILLS • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence. MATHEMATICAL SKILLS • Ability to add, subtract, multiply, divide, and measure using the metric system. REASONING ABILITY • Ability to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems that may arise in certain situations. LIASES WITH • Supervisors, • Foremen, • Production Manager, • PDSS Leadership ADDITIONAL GUIDELINES: • Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:, • 18 years of age or older at time of application, • Able to provide proof of US Person Status, • No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date, • No felony convictions of Drug crimes within three years from disposition date, • Willing to submit to a drug screen, • Willing to submit to a background check PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include but are not limited to the following: • Must have the ability to bend, squat, stoop, crawl, and kneel., • Perform prolonged standing., • Ability to turn head from side to side and about the vertical axis., • Lift/push/pull 50lbs on an occasional basis., • Lift/push/pull up to 20lbs on a frequent basis., • Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps)., • Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts., • Able to work at a variety of levels (ex. waist, eye, overhead)., • Demonstrate the ability to safely and appropriately use required tools and equipment., • Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., • Possess sufficient handgrip and coordination to carry and operate tools and equipment., • Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., • Ability to withstand cold and hot temperatures., • Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time within OSHA guidelines., • Able to respond to verbal and audible sounds/commands., • Able to utilize adequate visual skills., • Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., • Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud. PPE available and MUST be used correctly. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. COMPENSATION Pay Rate: $42.75 per hour Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

Now Hiring: Pipe Welders! Location: San Diego, CA Company: NSC Staffing Send resumes to: _ NSC Staffing is seeking Tig Welders with 2-5 years of experience for an exciting project in San Diego. This is an excellent opportunity to join a skilled team working on the repair and modernization of marine vessels, including those of the U.S. Navy, Military Sealift Command, and commercial ships. If you are a certified welder ready for your next challenge, apply today! Position Overview: We seek a detail-oriented, outgoing, dependable Marine Tig Welder for an established Marine and Industrial Repair Company. Qualified applicants will be assessed on their skill level and scheduled for an interview at our office. Essential Duties and Responsibilities: This position is responsible for the following tasks, with additional duties as assigned. • Read a tape measure, • Layout Material, • Fit-Up Material, • Rigging, • Read a blueprint/drawing/tech manual, • Comprehensive Torch and Weld Work, • Radius Gage, • Hand Power Tools, • Shop Tools/Equipment Required Education and Experience: • Must have verifiable Tig experience., • Ability to comprehend and utilize blueprints, sketches, drawings, and technical manuals to weld metals, • Must have a strong work ethic, be self-motivated, and be able to multitask, • Understand the Work Process to measure, cut, and weld metal (of multiple material types) to the required specifications, • Ability to weld metal using various requirements and procedures such as SMAW, GTAW, GMAW, and FCAW., • Able to work in a fast-paced environment with ongoing deadlines, • Must be able to work independently, • Understanding of the Ship repair industry, • Must be DBIDS and TWIC credential-eligible, • The pipe welding test is given in a restricted position (6 G) on a 5'' schedule 80 carbon steel pipe.?GTAW (TIG) process is used for root pass, and 11018 electrodes are used for the weld fill portion and cap. Working Conditions: • Open-air conditions such as noise, hot and cold, and in an office-controlled environment., • May have to visit projects aboard ships, rigs on and offshore, and confined spaces. Wear hearing, eye, and head protection and proper PPE when required., • Visits may require standing on various surfaces at differing angles, bending over, crouching, and climbing obstructions such as scaffolding, ladders, and internal barge and boat structural members. Why NSC Staffing? NSC Staffing is committed to providing innovative staffing solutions across multiple industries. We value integrity, safety, and excellence in everything we do. Benefits of Joining NSC Staffing: • Competitive pay or Salary Range: $25 + $150 per diem, • Comprehensive medical, dental, and vision coverage, • 401(k) retirement plan, • Direct deposit or Global Cash Card option, • Long-term job opportunities, • Referral bonuses for qualified candidates, • OSHA training and certification Company Overview: NSC is an innovative staffing firm that excels in placing qualified, skilled, technical, and professional talent across virtually every industry. We specialize in developing custom staffing solutions that cater to businesses of all sizes. Join Our Team Today! Apply now and advance your career with NSC Staffing - a leader in shipyard and industrial staffing. Visit our jobs page: www.nscstaffing.com / https://crm.nscstaffing.com/form/MzMzNjQ0MTYzNDY4ODQ NSC Staffing is a drug-free workplace and an equal-opportunity employer (EOE AA/M/F/V/D). #MA50

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of 3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Following specific and general instructions, specializes in TIG welding on all types of metal including titanium, nickel alloy, stainless steel and aluminum. May also clean, tack and weld production hardware using both auto and manual TIG welding techniques on a variety of metals. Acts as mentor for junior Welders. May work with engineering to resolve problems and develop new processes and/or procedures. Job Responsibilities Performs TIG welding on titanium and aluminum jet engine components. Performs TIG welding on all types of metals to include steel, aluminum, stainless steel and titanium. Cleans, grinds, and performs inspection as required to insure conformance to specifications. Helps in the design stage as required on projects. Mentors/provides guidance assistance and training to junior Welders. Checks all work to assure that quality standards are maintained and has adhered to all specifications and procedures involving company and customer practices. Maintains a clean work environment (including assigned storage and cleaning duties) in full compliance with company standards, customer and government regulations. Assists in the development and maintenance of a business culture, which supports the Company's overall business objectives and goals, by providing leadership in issues that involve "cost, quality, process, schedule and people". Ensures the company's commitment to maintain a safe workplace and to protect the environment through the establishment and support of Company policy and adherence to various government regulations. Fully complies with the "GKN Aerospace, Inc. Policy Statement on Contracting with the United States Government" in all areas of responsibility involving direct and indirect contracting with the United States Government. Ensure subordinate staff is aware of the policy and their individual responsibility and accountability for complying with it. Performs daily preventative maintenance of equipment in adherence with a predefined schedule. Performs other duties, tasks and responsibilities as assigned. Job Qualifications Required Qualifications: High School diploma or GED 5+ year welding experience in TIG welding, or successful completion of additional welding certification/education for TIG welding. Must be able to achieve AWS certification (AWS D17.1) on all materials to be welded within 6 months of start. 3+ years of TIG welding experience working with basic math and reading blueprints and meet inspection requirements in accordance with customer specifications. This job role requires proficiency in English, both verbal and written, that is sufficient to understand and effectively follow written safety procedures, company policies, work instructions, operations manuals, and more in a manufacturing environment. Reliable and satisfactory attendance is an essential job function of this role and is critical in meeting operations and business needs". Must be a US Citizen or Green Card Holder due to program security clearance requirements and/or SSA requirements. Preferred Qualifications: GKN Experience Knowledge and experience in trouble shooting of safety, quality and technical issues with co-workers, quality and engineering functions. Must be willing to work in a repetitive production environment with concern for meeting cost, quality and schedule requirements. The ability to work as a team player as well as independently is required. Mentors/provides guidance assistance and training to junior Welders. Mental and Physical Demands: Ability to read, write and comprehend English instructions Basic Math skills Manual dexterity Ability to stand for long periods of time Lift up to 50 pounds Withstand loud noise of a machine shop environment Compensation Range The compensation range for this position is between $28.00 - $32.00 per hour. We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

Epsilon Systems Solutions, Inc. is seeking a full time Graving Dock Pipefitter Welder II in San Diego, CA. Summary: Performs various welding processes to repair, for fabricating, installing, and maintaining piping systems and welded structures foundations and fittings associated with Graving dock floating dry dock hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. The role involves reading blueprints, fitting pipe systems, performing precision welding, and supporting vessel construction and repair projects in shipyards or marine environments. Duties and Responsibilities: • Utilize standard mechanic's tools, ship fitting and welding equipment and tools, wood shaping equipment and tools, portable machine tools, fixtures, and various gauges in the maintenance and repair of SWRMC Graving Dock and docking block construction and disassembly., • Operate electrical, mechanical, and pneumatic equipment, including testing equipment, in the performance of duties., • Disassemble, clean, inspect, and assess materials and components to determine extent of wear and damage in justification of recommendations for reuse or disposal., • Identify materials and components requiring repair or replacement., • Support the building, set up, and removal of docking blocks for all docking operations within the SWRMC Graving Dock., • Repair and replace damaged and broken equipment components. Ensure post-repair testing to ensure proper operation., • Continuously evaluate and analyze the operational condition of machinery and equipment to ensure reliable, efficient, and safe operation., • Assist with the installation and removal of shop and dry dock equipment and components., • Researching, reading, and following technical manuals, blueprints, drawings, parts manuals, schematics, assembly instructions, and troubleshooting guides., • Provide thorough maintenance and repair reporting, documentation, and parts inventory., • Submit equipment repair trouble calls via supervision to SWRMC Facilities Division and assist with resolution and tracking., • Operate, maintain and repair a variety of graving dock machinery to include but not limited to marine centrifugal pumps of horizontal and vertical type, piston pumps, associated couplings, mechanical seals and shafts, capstans/winches/windlass, towing array equipment and slew motor gear assemblies., • Maintain various types of valves and associated piping systems., • Monitor mechanical systems on a routine basis for problems or abnormalities, when identified notify supervision, analyze causes, suggest possible solutions, performing corrective action as authorized., • Repair, set up, adjust, tear down, dismantle and reassemble various auxiliary mechanical equipment within the facility., • Perform machinery operational checks prior to and/or after dock operations as required., • Perform machinery operational checks after equipment repairs, changeouts or extended downtime., • Perform preventive maintenance equipment checks as required, reporting deficiencies to the supervision., • Adhere to strict compliance with all safety procedures and PPE requirements, to include Lockout-Tag-out procedures as required for work being performed., • Perform overtime duties as required for pre-docking, docking and undocking, as these evolutions typically take place during the night, to include required watches for the duration of vessel docking periods. Required Qualifications: • High school diploma or equivalent, • Minimum of 4 years Navy and/or Maritime industry work-related experience in the operation maintenance and repair techniques common to a variety of marine machinery, pumps, valves and associated pipping systems, • GTAW 2-1/2" steel pipe 70S2 and RN-82 in the 6G position, • SMAW steel plate 11018 in the vertical/horizontal positions, • Grade III and Grade V Brazing in the vertical/horizontal positions, to include face-feed and insert type fittings, • Knowledge of Lockout Tag-out procedures, • Ability to obtain and maintain a DOD Security Clearance, • Ability to make decisions using sound judgment while complying with policies, procedures and appropriate applicable technical guidance, • Ability to read and interpret schematics, drawings, blueprints, technical manuals, repair standards and other detailed written instructions, • Sound interpersonal skills and ability to communicate clearly, accurately and effectively across a wide range of seniority levels with both govt and active-duty military, • Effective oral and written communication skills, • Valid driver's license, • Obtain and maintain a valid forklift driver's license for operation of up to 10-ton forklifts. Obtain within 90 days of start date: • PQS 301 Craftsmen qualification, • Lock Out Tag Out training Obtain within 12 Months of start date: • Graving dock pump room qualification, • Graving dock sluice gate qualification, • Graving Dock Caison operator Pay Range: The pay range for this role is $26.26 - $32.53 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience ADA Notations: Requires working, walking, reaching, sitting and concentration in the presence of noise. Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways. Ability to lift, carry and move objects up to 50 lbs. in weight. Noise conditions range from very quiet to loud. Required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Construction Laborer/Welder (San Diego).A San Diego based Construction Company with operations throughout Southern California currently has openings for Full Time CONSTRUCTION LABORER/WELDER, in its Lakeside, California Division.The duties for this position will include and not limited to performing

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

Construction Laborer/Welder (San Diego). A San Diego based Construction Company with operations throughout Southern California currently has openings for Full Time CONSTRUCTION LABORER/WELDER, in its Lakeside, California Division.

The journeyman welder is also responsible for providing direction to assigned helpers.

Dynalectric Company San Diego is hiring for a Fleet Maintenance Technician.Under the supervision of the Fleet Manager, the position will be responsible for performing fleet inspections, basic & preventative maintenance, and troubleshooting and diagnostics Other responsibilities include shuttling, fu

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Maintains production and distribution of product by pulling orders from inventory, delivering production materials and supplies and staging finished product.Maintains inventory by identifying, labeling and placing materials and supplies in stock and recording location of inventory.Locates materials

Frito-Lay is seeking Warehouse Workers / Material Handlers to work in distribution centers loading, unloading, moving, and organizing snack products for delivery routes.Warehouse Workers are responsible for loading delivery trucks with product, unloading incoming shipments, moving product throughout

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Successful candidates will possess the following qualifications: 2-3 years' experience as a Material Handler.Forklift experience is required Experience in safely loading/unloading materials onto trailers and trucks.Requires frequent heavy lifting up to 75 pounds.Able to handle a very fast paced wor

Under direct supervision handles and maintains the flow of materials and products on the premises according to established guidelines.ESSENTIAL DUTIES AND RESPONSIBILITIES Physically handles materials used to construct components and finished produc Material Handler, Warehouse, Yard, Handler, Manufa

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

Operates seated and standing forklift to transfer product from warehouse floor to load trucks.Responsible for the expedient and accurate handling of merchandise into and/or out of the warehouse facility.Provides a high level of member service.Moves merchandise by hand or forklift equipment to mainta

As a Forklift Operator, you will be responsible for operating forklifts and supporting warehouse tasks, including: operate forklifts and other warehouse equipment safely.Duties and responsibilities can change depending on business needs.

Builders FirstSource Job Opportunity.Ignite your career at Builders FirstSource, America's largest supplier of building materials, value-added components and building services to the professional market.The #1 name in our industry, we help make the dream of home ownership more achievable every day.A

In this role, the Assembler, where you will provide friendly assistance to customers and team members, coordinate with other departments when needed, and respond to questions by phone, email, or in-person.Additional duties include manage simple records and enter information accurately, help organize

Inspect work for defects before turning the job over to welders.

ABC Supply is the nation's largest wholesale distributor of exterior and interior building materials.Delivery Material Handlers at ABC assist in the safe and accurate delivery of materials from the warehouse to each job site location.They unload orders according to customer specifications with the h

Pipefitter Job Duties: Selects type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications.Inspects wo

Inspect work for defects before turning the job over to welders.