Trabajos Construction & Trades en Montgomery, AlabamaCrear alertas

Job Description Laborer position/ Nail Driver Duties and Requirments • must 18 or older, • have reliable transportation, • must be able to pass a drug screening, • must be able to walk or stand for longer periods of time

Job DescriptionDescription: Are you a highly skilled Project HVAC Commercial Service Technician looking for a dynamic and immediate opportunity? Do you enjoy a fun, supportive, and team-oriented work environment? Join our team and help homeowners experience comfort and efficiency while advancing your career in a company that values your expertise. Why Join Our Team? • Comprehensive benefits: 401(k), medical, dental, vision, life, AD&D, short- and long-term disability, critical illness, accident, and hospital indemnity coverage, • Paid holidays and vacation, • Ongoing training to develop your skills and advance your career, • Supportive, team-oriented culture built on integrity and accountability What You’ll Do • Perform start-up, commissioning, and testing of newly installed equipment., • Diagnose mechanical, electrical, and control system issues., • Read and interpret blueprints, wiring diagrams, and project specifications., • Complete retrofit, replacement, and renovation projects according to schedule., • Perform preventive maintenance and recommend equipment upgrades when necessary., • Maintain accurate service records, project documentation, and daily reports., • Communicate effectively with project managers, customers, and fellow technicians., • Ensure compliance with OSHA safety regulations and company safety policies., • Maintain company vehicle, tools, and equipment in a clean and organized manner., • Provide exceptional customer service while representing the company professionally. What We’re Looking For • High school diploma or GED required., • 3+ years of commercial HVAC service experience (project experience preferred)., • EPA Section 608 Universal Certification required., • Valid driver's license with a clean driving record., • Ability to read electrical schematics and mechanical drawings., • Strong troubleshooting skills in refrigeration, electrical, and HVAC controls., • Experience with building automation systems (BAS) is a plus., • Ability to work independently with minimal supervision. Ready to Join a Company That Values Expertise and Teamwork? Apply today and start building a stable, rewarding career with our team — where your skills, growth, and impact truly matter. Requirements:

Job Description Position Summary Thompson Engineering is seeking qualified CEI Inspectors to support construction projects throughout the Alabama area. This role is responsible for inspecting construction activities and documenting project progress to ensure compliance with approved plans, specifications, and applicable standards. The CEI Inspector works closely with contractors, the Senior Inspector, and the Project Manager to support successful project delivery. Key Responsibilities • Inspect construction work in progress to verify conformance with project plans, specifications, and standards., • Inspect completed installations to ensure quality workmanship and compliance., • Prepare and maintain accurate daily inspection reports, including labor, equipment, work performed, and relevant communications with contractors., • Conduct material inspections and testing for incorporation into the project., • Prepare sketches and documentation for construction elements that deviate from original plans and assist with updating master plans., • Assist with office-related tasks, including plotting cross-sections and calculating earthwork quantities., • Safely operate a company vehicle to and from project sites., • Comply with Thompson Holdings, Inc. Health, Safety & Environmental (HSE) Management System, including all safety policies, procedures, and job safety analyses., • Actively participate in monthly safety meetings, project toolbox talks, and safety moments., • Maintain regular, punctual attendance., • Perform additional duties as assigned., • Some travel will be required to support projects as needed Minimum Qualifications • High school diploma or equivalent, • Valid driver's license, • Intermediate math and geometry skills (e.g., calculating area and volume), • Willingness to travel on a as needed basis Physical Requirements • Ability to work outdoors in varying environmental conditions up to 100% of the time, • Ability to lift a minimum of 50 pounds, • Ability to stand for a minimum of eight (8) hours per day, • Ability to bend, stoop, climb ladders, and work on uneven terrain, • Ability to walk, stand, and balance on pavements, concrete, grass, dirt, and gravel, • Ability to communicate effectively, both verbally and in writing, • Ability to safely drive a company vehicle to and from work sitesAbout Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients. Equal Employment Opportunity Employer We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionSenior Estimator / Preconstruction Manager Location: Perry, GA Position Summary We are seeking an experienced Senior Estimator / Preconstruction Manager to lead estimating and preconstruction efforts for federal construction projects. This role is responsible for developing accurate cost estimates, supporting proposal development, managing subcontractor procurement, evaluating project risk, and ensuring successful project transitions from pursuit through award. The ideal candidate brings extensive federal construction estimating experience and a strong understanding of Design-Build, Design-Bid-Build, MATOC, IDIQ, and negotiated procurement environments. Key ResponsibilitiesEstimating & Cost Analysis • Develop conceptual, schematic, design development, and final construction estimates., • Prepare quantity takeoffs and pricing for labor, materials, equipment, and subcontracted work., • Review drawings, specifications, geotechnical reports, and solicitation requirements., • Develop competitive pricing strategies while protecting project profitability., • Maintain historical cost databases and estimating benchmarks., • Present estimate reviews to executive leadership prior to submission.Federal Proposal Support, • Review RFPs, IFBs, Sources Sought notices, and federal solicitations., • Develop pricing volumes and support technical proposal development., • Coordinate subcontractor outreach, bid-day activities, and proposal schedules., • Ensure compliance with FAR, DFARS, Davis-Bacon, Buy American Act, and other federal requirements., • Conduct subcontractor bid leveling and scope analysis., • Support Design-Build pursuits alongside architects, engineers, and consultants.Preconstruction Management, • Lead project planning efforts during pre-award and transition phases., • Develop project budgets, schedules, logistics plans, and execution strategies., • Perform constructability reviews and value engineering assessments., • Identify project risks and develop mitigation strategies., • Coordinate with operations teams to ensure seamless project handoff., • Participate in site visits, client meetings, and pre-bid conferences.Leadership & Collaboration, • Mentor and support junior estimating personnel., • Establish estimating standards and best practices., • Support project teams with change order pricing and cost analysis., • Build relationships with subcontractors, suppliers, design partners, and government clients.QualificationsRequired, • Bachelor's degree in Construction Management, Engineering, Architecture, or related field, or equivalent experience., • 10+ years of construction estimating experience., • 5+ years estimating federal construction projects., • Experience estimating projects ranging from $1M to $35M+., • Strong knowledge of federal procurement and contracting requirements., • Experience with Design-Build and Design-Bid-Build delivery methods., • Proficiency with estimating software such as Bluebeam, Procore, BuildingConnected, or similar platforms., • Ability to read and interpret plans, specifications, and contract documents.Preferred, • CPE, DBIA, PMP, CCM, LEED, or related certifications., • Experience with NAVFAC, USACE, Air Force, GSA, DHS, VA, or other federal agencies., • Experience managing multiple pursuits simultaneously., • Familiarity with Primavera P6 or Microsoft Project.

Job Description MMR Group, Inc - Project HSE Technician for our Montgomery, AL site: Must haves for this site: OSHA30 and any BCSP certification Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record’s “Annual Specialty Contractors.” All of which can be further explained on our website (https://mmrgrp.com/resources) by watching the provided videos. Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada and South America. For more information, please visit our website: www.mmrgrp.com. Job Description: MMR is seeking HSE Project Technician candidates looking to work full time out of our site in Montgomery, AL. The responsibilities would include, but are not limited to, the following: Responsibilities: • Report to the Project Safety Coordinator, and/or Branch Office Safety Coordinator., • At the direction of the Project Safety Coordinator, conduct New Hire Orientation and/or Site-Specific Orientation (i.e., MMR Orientation, Site Safety Plan, Emergency Action Plan, Fall Protection, HAZCOM, and PPE)., • Accompany injured/ill employees to Medical Facilities to ensure proper treatment and Case Management if directed to do so and under guidance from the Project Safety Coordinator., • Perform field inspections and audits (i.e., JSEA’s, Equipment Inspections, Ground Assurance, safety equipment, fire extinguishers, ladders, field observations), • Actively participate in MMR’s Behavioral Based Safety Program by performing observations and providing feedback as needed., • Enter BBS Observation details from cards into BBS Observation Database., • Assist as needed entering and uploading site training in the MMR electronic database (M-Files) for proper record retention., • Perform on-site coaching as required and follow-ups to ensure the training was understood by our employees., • Ensure that safety procedures are being followed by all employees including enforcement of MMR “Life Critical Policies”., • Correct all unsafe acts or conditions., • Participate in daily JSEA and Daily Toolbox meetings., • Work with Supervisors to ensure Safe Work Practices are being followed., • Stay up to date and current on MMR HS&E Policies & Procedures and applicable regulatory (i.e. OSHA, MSHA, DOT, NFPA) requirements., • Assist in accident investigations with the Project Safety Coordinator, and/or the Site Manager. Implement corrective actions as directed by the Project Safety Coordinator., • Inspect tools and safety equipment including arc flash and shock protection before use., • Perform monthly inspections of Site Office, Tool and Calibration Trailers, including tools, appliances, equipment and safety gear., • Other duties to include additional HS&E related support not listed as requested by the Project Safety Coordinator and Site Management., • Attend required and refresher training related to company, vendor, and regulatory compliance, • Must comply with all safety and company rules and regulationsEducation and Certifications required: STSC or HIGHER certifications, OSHA 30, HS Diploma or equivalent, 3-5 years of experience as an HSE technician in Electrical. Certifications and/or Licenses Employee must possess proper forms of identification such as valid Driver’s License or State identification, and a Social Security Card. State and/or local license/certifications may be required. Certification which may be a plus: Certified Safety Professional (CSP), Associate Safety Professional (ASP), Occupational Health and Safety Technician (OHST), Construction Site Safety Technician (CSST), NFPA 70E knowledge **Bilingual in Spanish and English preferred but not required. Schedule: 58-hour workweek MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class. Powered by JazzHR 2nw91Z08QF

Job Description Picture this: a homeowner welcomes you on a sweltering day. You assess, lead your helper, install with precision, wire for performance, and deliver comfort that changes their week. At Southern Home Services—operator of residential HVAC, Plumbing, and Electrical companies nationwide—you’ll lead installs that make a visible difference while building a meaningful career. Your mission Own the install from truck door to customer walkthrough. Be the craftsperson, the teacher, and the trusted face of quality. Impact you’ll make • Lead the installation, upgrade, and replacement of residential HVAC systems to exacting standards., • Cut, thread, and connect copper or PVC; complete high- and low-voltage wiring safely and cleanly., • Mentor Install Helpers in the field and shop, sharpening their skills and judgment., • Provide outstanding customer service with clear, empathetic communication., • Manage the physical demands of the job: lift 50+ lbs, bend, and maneuver equipment safely., • Maintain meticulous tool, part, and vehicle organization., • Tackle attics, heights, and tight spaces in heat, cold, and challenging weather., • Comply with appliance standards, the Occupational Health and Safety Act, and our service standards., • Take on additional duties as assigned. What sets you apart, • 1+ years as a residential HVAC Lead Installer with strong hands-on expertise., • Valid driver’s license and clean driving record., • EPA certification., • Advanced diagnostic ability and critical thinking under pressure., • Self-driven, enthusiastic, and committed to top-tier workmanship., • Customer-centric, professional communicator across all organizational levels., • Adaptable, collaborative, and innovative in fast-moving environments. Physical capabilities, • Lift 50 lbs regularly and up to 100 lbs occasionally., • Climb ladders; access attics; navigate tight spaces and crawlspaces; push, carry, pull; use hand tools; perform fine detail work., • Drive between jobs., • Work indoors/outdoors, including attics and crawlspaces., • Stand, walk, and sit; talk or hear in person and by telephone., • Use hands to handle or feel objects/controls; reach with hands and arms., • Routinely stoop, kneel, bend, and crouch., • Operate in extreme temperatures and adverse weather such as wind, rain, ice, or snow. Southern Home Services will make reasonable accommodations to allow an employee to perform the essential functions of the job. Why you’ll thrive here • Reliable, year-round work, • Weekly paychecks, • Paid Time Off and paid holidays, • Comprehensive medical, dental, and vision benefits, • Health savings account, • Flexible spending account, • Growth opportunities, • Employee discounts, • Company paid short term life insurance, • Life insurance This is a non-exempt position. Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization.

Job DescriptionDescription️ Seize the Opportunity: As a Senior Technician, You're Not Just Fixing Equipment—You're Powering Industry, Mentoring Talent, & Driving Excellence. ⚙️ Why WMH? Because Your Career Deserves More! At WMH (www.wmhsolutions.com), we don’t just offer jobs—we build unstoppable careers. With over 35 years of industry excellence, we’ve grown into the Southeast’s fastest-growing material handling leader, with 11 locations across NC, SC, TN, VA, GA & AL—and we’re just getting started. We operate on honor, integrity, and a relentless drive for excellence. Your success is our mission, which is why we invest in training, mentorship, and leadership development to accelerate your career. What sets us apart? We’re not just another dealership—we’re redefining the industry as a full-scale solutions provider, delivering cutting-edge automation, fleet technology, and next-level innovation that keeps businesses moving forward. When you join WMH, you’re stepping into a future filled with opportunity, advancement, and impact—because here, your career moves forward. WMH is seeking a Senior Mechanic/Technician to join our elite team. As a Senior Mechanic/Technician, you’ll play a critical role in ensuring peak performance, taking charge of advanced diagnostics, precision repairs, and proactive maintenance on cutting-edge equipment. But this role is more than just turning wrenches—it’s about leading by example, optimizing performance, and mentoring the next generation of skilled technicians. Your expertise will fuel operational success, maximize uptime, and push industry standards forward while fostering a team-driven culture of excellence. At WMH, we don’t just fix equipment—we keep industries moving, develop top-tier talent, and set the gold standard for reliability and innovation in material handling.️ Your Mission? To be the driving force behind operational excellence, delivering advanced diagnostics, expert-level repairs, and proactive maintenance that maximizes uptime and efficiency. You'll play a critical role in ensuring peak performance for our clients while leading, mentoring, and developing the next wave of skilled technicians. At WMH, your experience isn’t just valued—it’s the foundation for the future. Key ResponsibilitiesIndependence & Field Expertise ✅ Hit the Road: Start your workday from home, servicing customers on-site in a company-provided van with the latest tools & diagnostic technology. ✅ Own Your Territory: Maintain and repair forklifts, heavy machinery, and material handling equipment across warehousing, distribution, and manufacturing industries. ✅ Be the Expert in the Field: Deliver on-site service with speed, accuracy, and professionalism—our customers rely on you! Advanced Diagnostics & Repairs✅ Troubleshoot Like a Pro – Diagnose complex mechanical, hydraulic, and electrical issues with precision and efficiency. ✅ Fix it Right, The First Time – Execute top-quality repairs & preventive maintenance to maximize uptime & minimize breakdowns. ✅ Own the Fleet – Maintain WMH and customer equipment at peak performance through scheduled maintenance, inspections, and safety checks. Lead & Mentor the Next Generation️‍✅ Train & Develop Junior Techs – Share your expertise, foster a culture of excellence, and guide the next generation of mechanics. ✅ Be a Leader – Set the gold standard in service, helping newer technicians refine their skills and elevate their careers. Customer Engagement & Service Excellence✅ Deliver Outstanding Customer Support – Work closely with clients, providing expert consultation, service recommendations, and technical solutions. ✅ Customer-Focused Communication – Keep customers informed about service updates, repairs, and proactive maintenance. Documentation & Compliance️ ✅ Precision Documentation – Maintain accurate service reports, repair logs, and work orders to ensure seamless operations. ✅ Safety & Compliance First – Uphold OSHA standards, industry regulations, and best practices to keep work environments safe and efficient. The Field: • Diverse job sites., • Weather-ready – wet, humid, hot, or cold., • Embrace dust and noise. Power Up: This job is active, demanding your presence - standing, walking, bending, kneeling, stooping, crouching. You'll lift and move items weighing over 50 lbs. Vision? You've got it - close, distant, color, peripheral, depth perception, and a knack for adjusting focus. ️️ Skills, Knowledge and Expertise ️️✔ Experience: 5+ years as a mechanic/technician in material handling, heavy equipment, or automotive industries. ✔ Technical Expertise: Advanced knowledge of diesel engines, hydraulics, electrical systems, and industrial machinery. ✔ Certifications: ASE Certification (preferred) in brakes, electrical, diesel, and preventative maintenance. Forklift certification a plus! ✔ Mechanical & Electrical Skills: Ability to diagnose, troubleshoot, repair, and maintain complex industrial equipment. ✔ Industry Knowledge: Familiarity with OSHA regulations, equipment compliance, and workplace safety standards. ✔ Problem-Solving Mindset: Strong troubleshooting and critical-thinking skills to resolve issues efficiently. ✔ Leadership & Mentorship: Proven ability to train, coach, and guide junior technicians. ✔ Customer Service Excellence: Outstanding communication and relationship-building skills. ✔ Technical Proficiency: Experience with diagnostic software, schematics, Microsoft Office, digital work platforms, & fleet management systems. ✔ Work Ethic & Drive: Self-motivated, detail-oriented, and results-driven. ✔ Physical Requirements: Ability to lift 50+ lbs, work in various conditions, and travel within assigned territory. ✔ Valid Driver’s License: Required for company van usage. Perks of Being a WMH Team Member:Premium Health Coverage – Your well-being matters! We offer premium medical, dental, and vision insurance with HSA & PPO options + company-paid AD&D & life insurance (with additional coverage available). Exclusive Training & Career Growth – Gain cutting-edge technical skills with our OEM-exclusive and in-house training programs. We invest in your growth, leadership, and future success. Time to Recharge – Enjoy a generous PTO plan + paid holidays so you can rest, recharge, and spend time with loved ones. Competitive pay & performance-Based Incentives -Earn what you're worth! 100% of your travel time is paid—no flat rates. ️ Tool Allowance (Paid Quarterly!) – Keep your gear in top condition with regular tool reimbursements. Uniforms Provided & Laundered Weekly – Look sharp on the job without the hassle! ️‍ PPE & Safety Shoe Allowance – We’ve got you covered with protective gear and workwear support. Stay Connected – Get a monthly cell phone allowance to ensure you have the tools to communicate effectively. Company Van, Tablet & Fuel Card – Take your fully-equipped van home and work within your service area with ease. Secure Your Future – 401(k) match up to 9% + profit-sharing benefits to help you build long-term financial success. Unmatched Job Stability in a Booming Industry – Material handling is the backbone of logistics, warehousing, and supply chains. Your skills will always be in demand. ⚖️ Work-Life Balance That Works for You – We know flexibility matters, and we offer schedules that support a thriving career and personal life. Ongoing Professional Development – We invest in your success with mentorship, leadership training, skill-building opportunities & career advancement opportunities. Be Part of Something Bigger – At WMH, you're not just another employee—you’re a key player in an industry that keeps the world moving. Your Cue: Take the Wheel of Your Future! This isn’t just another job—it’s your chance to be part of a powerhouse team that’s revolutionizing the industry and redefining careers. At WMH, we don’t just keep businesses moving—we propel careers to new heights. Don’t wait. Don’t watch. Be part of something BIG, something BOLD, something that makes you excited to jump out of bed every morning! The future is calling—ignite yours today! Apply now.

Job Description TITLE: Project Facilitator, Federal Market LOCATION: Montgomery, AL REPORTS TO: Senior Project Manager U.S. Citizenship Required ABOUT BREWER-GARRETT The Brewer-Garrett Company is a facility solutions company dedicated to making buildings more energy-efficient through HVAC design, electrical upgrades, building automation systems, maintenance, and repair. We are a solutions-driven business with a proven track record of helping clients reduce energy costs while improving their carbon footprint. Our team's creativity, expertise, and dedication to providing practical solutions for our clients set us apart in the industry. We take pride in our collaborative, team-oriented approach to projects, and we are seeking an energetic Project Manager to join our talented team. ABOUT THE ROLE The Project Facilitator – Federal Market plays a critical role in supporting federally funded energy and facility improvement projects throughout their full lifecycle-from development through construction and into the performance period. This position is responsible for coordinating project documentation, ensuring quality assurance compliance, supporting energy guarantee reporting, and maintaining alignment with federal requirements. The Project Facilitator works closely with project managers, engineers, subcontractors, and federal stakeholders to ensure projects remain organized, compliant, and on track. This role is assigned to federally funded projects located in Montgomery, Alabama. WHAT YOU'LL DO • Support federal projects through development, implementation, and performance phases, • Coordinate internal and external project meetings; prepare agendas, materials, and detailed meeting minutes, • Maintain and manage project documentation, reporting logs, RFI logs, and tracking databases, • Perform quality assurance reviews of project paperwork prior to submission, • Generate and organize documentation for ECM reporting, M&V documentation, and O&M files, • Assist with energy guarantee reporting and ensure alignment with scope, pricing, and energy revisions, • Maintain compliance with federal policies, Buy American Act (BAA) requirements, and other governing standards, • Assist in subcontractor prequalification, bid package preparation, and price reviews, • Coordinate with internal departments including Safety, HR, and Administration to ensure federal reporting requirements are met, • Support construction administration activities such as purchase orders, invoicing, subcontractor agreements, and Procore documentation, • Monitor project progress and communicate status updates to project leadership, • Build strong working relationships with customers, vendors, subcontractors, and internal team members WHAT YOU'LL BRING • Bachelor's degree in a related field, preferred, • 3–5 years of administrative, operations, or project coordination experience, • Prior experience supporting federally funded or government projects preferred, • Strong proficiency in Microsoft Office (Word, Excel, PowerPoint, Project), • Exceptional written and verbal communication skills, • Strong organizational and documentation management skills, • Ability to manage multiple priorities and work independently, • Professionalism, attention to detail, and strong follow-through, • Ability to learn new systems and technologies quickly REQUIREMENTS • Proof of U.S. Citizenship required, • Ability to comply with and successfully complete federal background check processes, • REAL ID driver's license and reliable transportation for occasional travel, • Ability to adhere to base policies and federal security protocols WHY JOIN US • Work on impactful federal energy and infrastructure projects, • Collaborate with a highly experienced and mission-driven team, • Gain exposure to complex federal compliance, energy guarantees, and performance contracting, • Contribute to projects that improve energy efficiency, sustainability, and facility performance WORKING CONDITIONS & PHYSICAL DEMANDS: This position may operate in a professional office environment, at an assigned office location, and/or on active construction job sites depending on project needs. • Office environment: Use of standard office equipment (computers, phones, photocopiers, filing cabinets). Noise levels are usually quiet to moderate., • Job Sites: Frequent exposure to loud environments, airborne particles, mechanical equipment, and varying weather conditions. The employee may work at heights, near moving mechanical parts, or in confined spaces. Appropriate PPE is required., • Travel: Must be able to travel regionally and occasionally out of state; overnight stay may be required based on project assignments. Physical requirements include: • Regularly: talking, hearing, standing, walking, reaching, and handling, • Occasionally: sitting, climbing, balancing, stooping, kneeling, crouching, or crawling, • Lifting: ability to lift/move up to 10lbs frequently and up to 25lbs occasionally, • Vision: close, distance, color, peripheral vision, depth perception, and focus adjustment Job Posted by ApplicantPro

Job DescriptionDescription: Are you a highly skilled Project HVAC Commercial Service Technician looking for a dynamic and immediate opportunity? Do you enjoy a fun, supportive, and team-oriented work environment? Join our team and help homeowners experience comfort and efficiency while advancing your career in a company that values your expertise. Why Join Our Team? • Comprehensive benefits: 401(k), medical, dental, vision, life, AD&D, short- and long-term disability, critical illness, accident, and hospital indemnity coverage, • Paid holidays and vacation, • Ongoing training to develop your skills and advance your career, • Supportive, team-oriented culture built on integrity and accountability What You’ll Do • Assist with installation and service of commercial HVAC systems, • Follow safety protocols and company policies at all times, • Learn to interpret blueprints, wiring diagrams, and project specifications., • Support technicians in diagnosing system issues and performing repairs, • Help load, unload, and transport tools, materials, and equipment to job sites, • Maintain accurate service records, project documentation, and daily reports., • Communicate effectively with project managers, customers, and fellow technicians., • Attend training sessions and pursue licensing or certification as required What We’re Looking For • High school diploma or GED required., • 1-2 years of commercial HVAC service experience (project experience preferred)., • EPA Section 608 Universal Certification required., • Valid driver's license with a clean driving record., • Ability to learn electrical schematics and mechanical drawings., • Able in refrigeration, electrical, and HVAC controls., • Experience with building automation systems (BAS) is a plus., • Ability to work independently with minimal supervision. Ready to Join a Company That Values Expertise and Teamwork? Apply today and start building a stable, rewarding career with our team — where your skills, growth, and impact truly matter. Requirements:

Job DescriptionMMR Constructors, Inc. is accepting resumes for Electrical Quality Control Inspectors at our site in Montgomery, AL with industrial construction experience. • Are you willing to travel?, • Do you have at least 8-10 years industrial and/or commercial electrical constructor experience?, • Do you have E&I quality experience?Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record’s “Annual Specialty Contractors.” All of which can be further explained on our website (https://mmrgrp.com/resources) by watching the provided videos. Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada, Qatar, and South America. For more information, please visit our website: www.mmrgrp.com. Duties and Responsibilities of Electrical Quality Control Inspectors (included but not limited to): • Administration of the Quality Management System (QMS) outlined in the MMR PQP, • Organizational freedom to recognize quality problems and to provide solutions to the problems, • Perform the various periodic project jobsite audits as required, • Review provided drawings, specifications, approved RFI’s and submittals, etc. for quality requirements, • Conduct and record all MMR quality inspection and testing activities on the appropriate Inspection and Test Report’s as required, • Coordinate ITP audit, hold, monitor, and witness points with client, owner, engineer, etc. PRIOR TO any inspection and /or testing activities, • Perform periodic project jobsite audits, surveillances, along with other MMR supporting quality documentation as required, • Gather records for quality Turnover Package submission, • Attend required and refresher training related to company, vendor, and regulatory compliance, • Attend safety training as directed, • Must comply with all safety and company rules and regulations, • Managing and overseeing QC InspectorsQualifications/Experience/Skills:, • Experience in industrial and heavy construction, • Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision, • Ability to coordinate a variety of project simultaneously, • Ability to demonstrate flexibility and creativity, • Strong organizational and interpersonal skills are required, • Able to work effectively under time pressure and/or deadline, • Excellent verbal and written communication skills, • Willingness to work flexible, varied hours, including evenings and weekends as needed, • Regular and reliable attendance at work**Bilingual in Spanish and English preferred but not required.MMR offers a competitive benefits package including health, dental, vision, 401(k), 401(k) matching and numerous other voluntary benefits. MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class. Powered by JazzHR BeyogJv61M

Job Description A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. • You are expected to work onsite every day that testing, or inspections are scheduled. Responsibilities • Review available training documentation and effectively apply it to daily activities., • Communicate clearly, confidently, and professionally with Clients / Engineers of Record / GC's / Subs / Vendors., • Learn the Cx process to effectively implement in the field., • Develop Cx procedures with use of a template., • Become familiar with testing durations to assist PM with Cx Schedule development., • Learn how to develop load bank plans to effectively test mechanical systems during integrated testing., • Assist in the development of TAB Verification plan., • Conduct TAB Verification as directed., • Deploy data loggers in the proper areas for required data collection with direction., • Execute functional testing with support of team members., • Fill in a daily onsite testing log., • Perform infrared (IR) scanning/analysis and record data in spreadsheet., • Mark IR photos for mechanical equipment., • Assist in the development of an IST Report including excel charts of data collected. Requirements • Work experience: None required., • Education: 4-year college degree or equivalent field experience, • Training: None required, • General understanding of all mechanical and electrical building systems, • Military experience a plus, • Computer Skills: Microsoft Office programs, • Math Skills: Must be able to calculate figures and amounts (percentages and proportions), • Communication: Understands instructions and can convey information to others in a simple and unambiguous way, • Organizational skills, • Leadership abilities, • Ability to work from home effectively and required travel to project sites 50-75% of the time. Top Skills & Proficiencies • Initiative, • Ability to take direction, • Organization, • Responsiveness, • Decision-Making, • Data Entry Skills, • Data Processing Skills, • Dependability, • Reporting Skills, • Deadline Oriented, • Problem-Solving and Critical Thinking, • Planning and Organizing, • Communication Skills, • Meme Generation, • Integrity, • Teamwork, • Negotiation, • Adaptability, • Stress Tolerance Work Conditions & Physical Demands • Must have a dedicated home office that is conducive to daily responsibilities., • Must be able to move about the work area and travel to worksites as needed or required., • Travel rotation is typically 3 weeks onsite, 1 week work from home. If you are local to a job site, you will be expected to work onsite. This is all subject to change based on client and business needs, • Must be able to communicate with a variety of individuals; must be able to follow verbal and written instructions/directions and respond to inquiries., • Must be able to frequently perform strenuous physical activity including but not limited to: stand for eight or more hours at a time, move in rugged or unstable conditions, work in adverse weather, handle or feel objects, tools or controls which may not be visible, reach overhead. Occasionally may be required to climb ladders, stoop, kneel, crouch or crawl., • Must be able to carry test equipment up to 30 pounds. #IND1

Job DescriptionDescription: Are you a highly skilled electrician looking for a dynamic work environment where you can showcase your talents? Do you thrive in a team that values professionalism, integrity, and leaving things better than they found them? Join our team as an experienced Electrician and play a key role in delivering exceptional electrical services to our customers. Why Join Our Team • Comprehensive benefits: 401(k), medical, dental, vision, life, AD&D, short- and long-term disability, critical illness, accident, and hospital indemnity coverage, • Paid holidays and vacation, • Ongoing training to develop your skills and advance your career, • Supportive, team-oriented culture built on integrity and accountability What You’ll Do • Diagnose, repair, and install residential and light commercial electrical systems, • Educate customers on their electrical systems and recommended solutions, • Maintain a safe and clean working environment, • Collaborate effectively with team members, • Demonstrate a willingness to learn and continue developing professionally What We’re Looking For • Minimum of 2 years of residential service work experience, • Ability to lift 50–75 pounds, kneel, crawl, and stand for extended periods, • Comfortable working in crawl spaces, attics, and on ladders, • Excellent customer service and communication skills, • Strong work ethic and a positive attitude Ready to Join a Company That Values Skill and Integrity? Apply today and start building a stable, rewarding career with us — where your work truly makes a difference. Requirements:

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Mechanics Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Pike Road, AL area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description MACS (Montgomery Armored Car Service, Inc.) and MACS Freight, LLC is a family owned and operated transportation company that specializes in providing deliveries that are custom tailored to each individual customer. We have been providing these services for almost 50 years. MACS is currently searching for a Fleet Mechanic Manager that is able to service, maintain, repair and keep up with maintenance records on all company vehicles. This will involve everything from daily equipment checks to performing both minor and major repairs. We are looking for an individual who is self-motivated and able to effectively maintain vehicles with little to no supervision. You must have excellent communication and interpersonal skills and display a positive attitude. Responsibilities and Duties • Responsible for the maintenance and repair of all fleet vehicles in Montgomery and Birmingham, • Perform preventative maintenance on all fleet vehicles such as changing oil, checking batteries, belts, hoses, etc., • Troubleshoot, diagnose, rebuild, replace and complete all required repairs on vehicles ranging from small economy cars to 26' straight trucks as specified in manufacturer designed procedures or accepted industry practices., • Maintains timely and accurate maintenance and repair records on all work performed., • Examines reports and invoices for accuracy on each vehicle repaired., • Contains costs by evaluating service and parts options., • Uses shop resources in a manner that allows for optimal productivity and timely completion of work., • Dedication and adherence to all company and industry safety standards., • Must be available for emergency situations after regular work hours when necessary (Monday-Friday 8 a.m. - 5 p.m.) Qualifications and Skills • Minimum of 3 - 5 years mechanic maintenance and repairs, • Prefer ASE Certification(s)- Master Automobile or Truck Technician, • Diagnostic, Electrical and AC skills are required, • Have previous fleet experience and are familiar with diesel and gasoline systems, • Able to manage multiple functions simultaneously in a fast-paced environment with minimal supervision, • Basic computer skills with ability to use diagnostic programs, • Excellent communication skills, • Strong organizational, problem-solving, and analytical skills, • Acute attention to detail, • Able to understand and follow written and verbal instructions, • High school diploma or GED, • Valid Alabama Driver's License, • Acceptable MVR, • Clean criminal background check, • Reliable transportation to work Benefits • Paid time off, • Paid holidays, • Health Insurance (includes dental) EOE E04JI800ki24400uq8v

Job DescriptionAre we the road to your future? We are currently searching for an experienced Senior CEI Inspector to support our Gulf Region located in Alabama. Experience in environmental and/or waterline construction is a plus. To be considered for this position, applicants must have, at minimum, 8 years of inspection experience. What you’ll be doing: • Inspection for compliance with contract documents, standards, and specifications, • Testing of materials; review of plans; analysis of engineering-related data; and construction survey/layout, • Keeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor’s progress, • Monitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications, plans and contractual provisions. Also monitors utility relocation efforts by inspecting and tracking relocation work • Documenting pay records, performing construction calculation, and computer/iPad entry, • Anticipates contractual problems and advises supervisor of the need for plan revisions, supplemental agreements, or other contract adjustments to improve safety, timely delivery and/or quality of delivered product • Ensures compliance with TN EPSC standards, and that all work performed in permitted areas, is done in accordance with the permits, • Effectively communicates and coordinates work with contractors, subcontractors, utility owners, and property owners to minimize delays and disturbances while maximizing progress of the projects • Perform acceptance testing of materials in a laboratory environment and inputs test results into various computer data bases What you need to have: • High School Diploma or equivalent, • 8 + years of progressive inspection level experience or equivalent combination of education and experience, • Possess a valid driver's license and good driving record, • Ability to pass a drug test, • Must be able to perform moderate physical activity including but not limited to walking, climbing, balancing, kneeling, and standing, • Must be able to lift 70 lbs., • Must be able to work nights and weekends as required, • Must apply safety philosophy and program to all operations, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI AL Alabama

Job DescriptionHVAC Technician / AC Mechanic Operator Location: Montgomery, AL / Tuskegee, AL Pay Rate: $25.32/hour We are seeking experienced HVAC Technicians to maintain and repair air conditioning and ventilation systems supporting patient care and facility operations. This role is critical to environmental control, indoor air quality, and reliable performance across the healthcare system. Responsibilities: · Perform preventive maintenance such as changing filters, cleaning coils, and checking overall system performance. · Inspect HVAC systems for wear, efficiency, and operational issues. · Diagnose malfunctions and replace faulty components such as motors, compressors, and thermostats. · Monitor and adjust central air conditioning systems to support patient care areas. · Help maintain indoor air quality through proper ventilation and humidity control. · Coordinate with other maintenance staff and hospital departments to ensure seamless HVAC operations. Qualifications: · Minimum 3 years of documented HVAC or AC mechanic experience required. · Ability to work safely in heat, confined spaces, noisy settings, and around hazardous exposures. · Must meet respirator, PPE, OSHA 30-hour construction, and security badge requirements. · Resume submission is required for approval under the contract.

Job DescriptionOverview We are seeking a skilled Electric Motor Mechanic to join our team in Montgomery, AL, 36117. In this role, you will be responsible for the maintenance, repair, and overhaul of electric motors and related equipment. If you have a passion for mechanics and a knack for problem-solving, we want to hear from you! Responsibilities • Diagnose and troubleshoot electrical and mechanical issues in electric motors., • Perform routine maintenance and repairs on various types of electric motors., • Disassemble and reassemble motors and related components as needed., • Test and inspect motors to ensure optimal performance and safety standards., • Maintain accurate records of repairs and maintenance activities., • Collaborate with team members to improve processes and efficiency., • Adhere to all safety protocols and regulations while working. Qualifications, • High school diploma or equivalent; technical certification in electrical or mechanical engineering preferred., • Proven experience as an Electric Motor Mechanic or similar role., • Strong understanding of electrical systems and motor mechanics., • Ability to read and interpret technical manuals and schematics., • Excellent problem-solving skills and attention to detail., • Strong communication and teamwork abilities., • Willingness to work flexible hours and overtime as needed. You should be proficient in: • Electrical Troubleshooting Skills, • Motor Replacement/Repair/Maintenance, • Electrical Systems Diagnostics & Repair, • Electrical Troubleshooting, • Electrical Repair

Job Description Join our team at IHG Mechanical as a full-time Ammonia Refrigeration Service Technician! You will have the opportunity to work directly with our clients in the Fort Worth, TX Metroplex, providing exceptional service and solving complex industrial refrigeration issues. This is an exciting opportunity for experienced technicians looking to advance their careers! If that's you, please keep reading! WHAT'S IN IT FOR YOU? We offer this position competitive compensation of up to $60/hour. In addition, our scheduling is flexible. A typical workday is from approximately 7 am - 4 pm, Monday - Friday. If you want to grow both personally and professionally, you will thrive in this position. All you need is: • 2+ years of experience in ammonia refrigeration, • Valid driver's license and a good driving record, • Great customer service skills, • Excellent attention to detail, • Expert problem-solving skills Reta certification is preferred but not required. THE TYPE OF CARE WE PROVIDE OUR TEAM Our outstanding employees deserve much of the credit for the success of our business. We are proud of the excellent customer service they deliver, and we strive to ensure that they enjoy a healthy work-life balance. We also encourage good communication within the team and cultivate a supportive, friendly work environment. On top of that, we offer great benefits and pay. Come join our tight-knit team OUR SOLID BENEFITS • Medical insurance, • Dental insurance, • Vision insurance, • 401(k) plan In addition, we provide our Ammonia Refrigeration Service Technician with a company work truck and tools. YOUR DAY-TO-DAY AS AN AMMONIA REFRIGERATION SERVICE TECHNICIAN As our Ammonia Refrigeration Service Technician, you play a vital role in helping us help our customers! Each day, you perform routine maintenance and repairs to industrial refrigeration systems. As you do, you work to ensure that they are in optimal operating condition. You enjoy that your days are never alike as you travel to various sites around the Metroplex, troubleshooting issues and managing installations and repairs. Throughout your service call, you are attentive to detail and conscientious about consulting with the customer and our service manager to determine problems and pinpoint solutions. Getting our clients' systems up and running again makes you feel great. You're proud to contribute to our success and that of our customers in such a significant way! A LITTLE BIT ABOUT US IHG Mechanical has decades of experience in maintaining, servicing, and building industrial refrigeration solutions for some of the largest companies in the nation. Whether we're working with new construction or a retrofit application, with freon or ammonia, we have the expertise to design and implement climate control systems that optimize efficiency and reduce operating costs. TAKE THE NEXT STEP! So, what do you think? If you feel this is the right industrial refrigeration job for you, go ahead and apply! We value your time, so we've got a simple application process that should take you less than 3 minutes to complete. We look forward to meeting you! Location: 76116 Job Posted by ApplicantPro

Job Description Labor One is hiring Pipefitters for a shipyard in Pascagoula, MS. Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (281)965-2749 (956)382-2631 (228)471-5063 Please send us a text if we don't answer JOB SUMMARY: The pipefitter lays out, installs, and maintains vessels' piping systems, such as heat and power, hot water, hydraulic, air pressure and oil lines. They follow blueprints and use hand tools and shop machines. The pipefitter also cuts and bores holes in bulkheads and decks for installation of pipes. They operate shop machines to cut and thread pipe and pipe fittings. Pipefitters connect pipes to fixtures and test systems for leaks, ensuring that the system meets specifications. An experienced pipefitter will often work with an apprentice, sometimes called a tacker/helper. The position is characterized by problem solving and precision work. To be successful in this type of work, a pipefitter must be able to perceive pertinent detail in objects or blueprints. The above description is general in nature. A pipefitter may be required to perform additional duties not specifically described herein. HOURS: Typical hours for Pipefitter range from 40 to 70 hours per week. TRANSPORTATION: It is the responsibility of the worker to provide his or her own transportation to and from the facility. ESSENTIAL FUNCTIONS The pipefitter reads a layout in order to determine project requirements. This planning aspect of the job occurs contiguous with other tasks. Physical Demands: This function requires the individual to stand on a continuous basis. Some degree of visual acuity is needed when deciphering a layout. Essential Function: The pipefitter is responsible for pre-fabricating segments of pipe in a shop setting. This function may involve the use of shop machinery to bend or thread pipe, or install fittings, valves, traps, and thermostats. Physical Demands: Standing is considered constant during this essential function, walking is considered occasional. In a shop setting, overhead hoists are generally available and the pipefitter will work in tandem with a less experienced man, called a tacker/helper or 3rd class pipefitter. Lifting and carrying are controlled and aided by the above mentioned characteristics. Company policy enables individuals to obtain assistance with items over 40lbs and may easily be observed. A shop setting allows for work to take place on an even, concrete surface. Essential Function: Installation of piping systems onboard and within vessel modules, to include positioning, fastening, and connecting various systems, such as heat and power, hot water, hydraulic, air pressure and oil lines. The pipefitter will weld pipe support brackets, connect pipes to fixtures and, to a lesser degree, fabricate lengths of piping systems onboard or within vessel modules. Physical Demands: Heavy items are positioned with a chainfall, overhead crane, or a come-along. Standing is again considered constant and walking occasional. Because workers commonly work in pairs, the 40lb maximum can generally be observed. The heaviest come-along can weigh in the 75lb range and could be handled occasionally during the course of a day, depending upon the job. Essential Function: An additional function is that the pipefitter is responsible for testing installed systems to ensure specifications utilizing hydrostatic and other pressurized equipment. Physical Demands: This function requires the individual to stand on a continuous basis. In addition to essential function number one, this function comprises the less physical, thinking and planning aspects of the job. Obviously, the more experienced pipefitters will bear the majority of the responsibilities outlined in functions one and four. Essential Function: Regular and predictable attendance is required. Other reasonable duties as assigned by management. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionDescription: SIGN ON BONUS- UP TO $5,000 based on experience Do you want to work for a company with excellent benefits and work for a company that values your work-life balance? Since 1908, our family-owned business has earned a reputation for quality work and unmatched customer focus. We are growing and looking for a full-time HVAC Install Technician with integrity and professionalism to join our team. Who You are: • You have great communication and strong leadership skills., • You can multi-task in a fast-paced work environment, • You work well with a team., • You have excellent work ethic and leadership skills. What You will be responsible for: • Serving the company’s clients through the expert installation of replacement systems. Replacements are an essential aspect of the company business that the company has an excellent reputation for quality installations. Take pride in every installation that you do. Let the client know what you did for them that other companies don’t usually do. Show the client through the quality of your work that your company offers superior service and quality., • Wear floor savers while in the client’s home. Use drop cloths to protect the client’s floors while performing an installation. Always maintain a neat work area where you are working., • Re-check each aspect of an installation before leaving the job to prevent unnecessary callbacks after the job is finished. Use the Installation Excellence Form for re-checking., • Always explain the system to the client when finished with an installation and make sure that they are 100% satisfied with the work., • Always be safety conscious both on the job and while driving, and make sure that the assistant installer is also working safely and neatly., • Maintain a production level minimum as determined by management and the annual plan., • Perform full system change-outs in an average of one day or less., • Trucks must be neat and clean on the inside and outside at all times. The truck is one of the best billboards that the company has. Park the truck for the maximum impact of the “billboard” when possible., • Train installation assistants, teaching them to work independently for maximum installation efficiency., • Fill out installation paperwork in a timely and accurate manner., • Obey company Code of Ethics and the Team RulesRequirements:, • At least 4 years’ experience in HVAC installation preferred., • ServiceTitan software experience preferred., • Must be able to pass drug test, background check, driving record check, and physical fitness test., • Must have a valid driver’s license., • You must be able to lift up to 50 pounds; be able to push, pull, carry or maneuver heavier items (with additional manpower or appropriate devices); carry ladders; work from heights, work in small spaces., • Must be willing to work overtime to complete an install., • Must have excellent customer service skills, • Basic mechanical aptitude, and ability to perform regular manual labor., • Follow routine verbal and written instructions well., • Have effective communication skills with coworkers, management, and customers., • Be open to learning new things and applying them quickly.

Job DescriptionDescriptionSeize the Opportunity: Become a Senior Field Service Technician! Why Us? • Propel your career with us – Join an exhilarating journey of growth., • Reap the rewards of outstanding benefits., • Be part of a dynamic team with limitless potential., • *Sign-on BONUS opportunities await* WMH (Wheeler Material Handling) (‪www.wmhsolutions.com) is your ticket to success in the material handling industry. With over 35 years of experience and a strong presence across 11 branches in NC, SC, TN, VA, GA, and AL, we're driving industry forward. ️ As a Senior Field Service Technician, you're the hero on the front lines, keeping our customers' heavy equipment in top shape and their operations running smoothly. Key ResponsibilitiesYour Impact: • Master of Machinery – Troubleshoot and resurrect heavy equipment., • Diagnose and conquer challenges, from basic repairs to complex fixes, • Perform meticulous inspections to identify issues, • Document your findings with precision, • Manage parts efficiently to keep the job flowing, • Collaborate with customers to meet their needs, • Master your tools and safety protocols, • Stay ahead of the curve with the latest industry innovations, • Be a time management pro, • Communicate effectively with everyone, • Mentor and support your colleagues The Field: • Diverse job sites., • Weather-ready – wet, humid, hot, or cold., • Embrace dust and noise. Skills, Knowledge and ExpertiseWhat We're Looking For: • High School Diploma or GED., • 5+ years of material handling experience preferred., • Valid driver's license and clean record., • Pass background check, physical, and drug screening., • Bring your arsenal of tools., • Keep learning and stay at the forefront of the industry., • Possess a professional and relentlessly positive attitude., • Technical prowess, • Customer service magic, • Problem-solving skills, • Initiative and decision-making ability, • Organizational talent BenefitsJoin us and enjoy: Top-notch health insurance. Ongoing in-house exclusive HYG technical training programs Enjoy Paid Holidays and generous PTO. Competitive pay️ Tools allowance (Paid Quarterly) Provided Stylish Uniforms, Top-Notch PPE, Generous Safety Shoes Allowance. Company service van and fuel card Stay connected with a Cell Phone Allowance. Retirement plan, Profit Sharing, and more! Sign-on bonus opportunities await!Keep your work-life balance intact with flexible hours. Ready to Ignite Your Career? Join Our Team Now! Commitment to Growth: • We believe in rewarding excellence and commitment, with opportunities for pay increases as you grow and excel in your role. Join us and be a part of a team where your efforts are not just appreciated but tangibly rewarded! This Is Urgent!We're growing fast and we need someone amazing like you NOW! Don’t miss this chance to be part of something big, something exciting, something that'll make you leap out of bed each morning! We're passionate about diversity and inclusivity, where your skills and dedication are the keys to success. Seize this opportunity, elevate your career, and be part of something extraordinary! Apply today!

Job Description D7 Pneumatics LLC is a trusted leader in the fire protection and pneumatic systems industries. We pride ourselves on delivering high-quality, reliable, and innovative solutions for a variety of sectors. We are looking for a motivated and detail-oriented Certified Sprinkler Fitter to join our team. This role offers an excellent opportunity to apply your technical expertise and contribute to safety, efficiency, and the quality of our installations. Job Overview: As a Certified Sprinkler Fitter at D7 Pneumatics LLC, you will be responsible for the installation, maintenance, and repair of fire sprinkler systems, ensuring that projects meet high-quality standards and are completed safely and efficiently. You will collaborate with other team members and provide technical guidance to apprentices and other field personnel. You will play a key role in ensuring projects are executed according to specifications and safety regulations. Key Responsibilities: • Coordinate with the Superintendent/Foreman: Work closely with the Superintendent/Foreman to determine the most efficient methods for completing assigned and special projects., • Material and Equipment Management: Help assess and determine the material, tools, and equipment needed for the successful completion of each job, ensuring timely and accurate procurement., • Quality and Safety Assurance: Ensure adherence to quality and safety controls, maintaining a safe work environment and delivering projects with zero time lost due to accidents or safety incidents., • Care and Maintenance of Company Property: Take responsibility for the proper use and care of all company-issued vehicles, equipment, and tools, protecting them from damage, deterioration, or theft. Ensure that all company property is kept clean and well-maintained., • Training and Development: Assist in the development and training of field personnel on proper installation procedures, promoting a high level of professionalism and safety awareness among the team., • Technical Consultation: Provide technical support and advice to apprentices, technicians, designers, and shop employees to resolve issues and maintain high installation standards., • Additional Duties: Respond to other responsibilities assigned by the Labor Supervisor and/or Project Foreperson, contributing to team success and project efficiency., • Other Duties as Assigned: Undertake additional tasks as requested by management, ensuring the smooth operation of projects and the company. Qualifications: • REQUIRED: 3 or more years of experience installing sprinkler systems, • Preferred: 5 or more years of experience installing sprinkler systems, • Ability to read and interpret blueprints, schematics, and technical drawings., • Skilled in the use of tools and equipment related to sprinkler fitting and fire protection systems., • Excellent problem-solving, troubleshooting, and diagnostic abilities., • Demonstrated ability to work safely in accordance with OSHA regulations and company safety protocols., • Strong communication skills, both written and verbal, with the ability to work effectively with team members, apprentices, and management., • Capable of lifting heavy materials (up to 50 lbs) and working in a variety of environments, including confined spaces and elevated areas., • Ability to take initiative and complete tasks with minimal supervision., • Must have a valid driver’s license and a clean driving record.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR j1JRAlXfXk

Job Description CRM is currently hiring an experienced Crane Operator for a commercial construction project in Montgomery, Alabama. We are looking for a dependable, safety-focused operator with experience operating various cranes in an active commercial construction environment. Responsibilities • Safely operate a Broderson IC-250 Industrial Carry Deck Crane, • Lift, move, position, and place construction materials and equipment, • Perform daily pre-operational inspections and report any mechanical issues, • Follow lift plans and communicate effectively with riggers and signal persons, • Maintain OSHA safety standards and company safety policies, • Work closely with superintendents and other trades to complete daily tasks, • Assist with general job site duties when crane operation is not required Qualifications • Previous crane operating experience required, • Valid NCCCO Crane Operator Certification (preferred; required if applicable to project requirements), • Ability to read and understand load charts, • Knowledge of proper rigging and signaling procedures, • Strong commitment to job site safety, • Ability to work outdoors in varying weather conditions, • Reliable transportation and excellent attendance, • Ability to lift up to 50 lbs. and perform physical work as neededCompany DescriptionWe offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with.We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with.

Job DescriptionAre we the road to your future? We are currently searching for an experienced CEI Inspector to support our Gulf Region located in Alabama. Experience in environmental and/or waterline construction is a plus. What you’ll be doing: • Inspection for compliance with contract documents, standards, and specifications, • Testing of materials; review of plans; analysis of engineering-related data; and construction survey/layout, • Keeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor’s progress, • Monitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications, plans and contractual provisions. Also monitors utility relocation efforts by inspecting and tracking relocation work • Documenting pay records, performing construction calculation, and computer/iPad entry, • Anticipates contractual problems and advises supervisor of the need for plan revisions, supplemental agreements, or other contract adjustments to improve safety, timely delivery and/or quality of delivered product • Ensures compliance with EPSC standards, and that all work performed in permitted areas, is done in accordance with the permits, • Effectively communicates and coordinates work with contractors, subcontractors, utility owners, and property owners to minimize delays and disturbances while maximizing progress of the projects • Perform acceptance testing of materials in a laboratory environment and inputs test results into various computer data bases What you need to have: • High School Diploma or equivalent, • Possess a valid driver's license and good driving record, • Ability to pass a drug test, • Must be able to perform moderate physical activity including but not limited to walking, climbing, balancing, kneeling, and standing, • Must be able to lift 70 lbs., • Must be able to work nights and weekends as required, • Must apply safety philosophy and program to all operations, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • A satisfactory motor vehicle report (MVR), reflecting a safe driving history with no major violations, limited minor infractions, and a valid driver’s license, in accordance with company and insurance guidelines. Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI AL Alabama

Job DescriptionDescription: Are you looking for a job you can call a career? Want to work for a company that cares about you both professionally and personally? Since 1908, our family-owned business has earned a reputation for quality work and unmatched customer focus. We are growing and looking for a full-time HVAC technician with integrity and professionalism to join our team in Montgomery, Alabama. Who You are: • You have great communication and strong customer service skills., • You work well with a team., • You have excellent work ethic and leadership skills. What You will be responsible for: • Install, maintain and repair heating, ventilation, and cooling units for primarily commercial customers. Diagnose and repair of electronic, mechanical and electrical components of these systems, • Travel to job sites in service area and work with dispatch to ensure schedule is maintained and delays are properly communicated to customer, • Be available to work nights or weekends, on a rotating basis, to service emergency needs of our customers, • Participate in company provided training opportunities on latest industry technologies, • Identify, report and educate client on potential opportunities for additional business (newer system, service contracts, and additional services), • Come in every day eager to learn and develop new skills Who We are: • We believe in Doing the Right Thing, • We believe in Service Excellence, • We believe in Mutual Respect, • We believe in Delivering Happiness, • We believe in Safety, • We believe in Continuous Improvement and Dedication Perks: • Competitive Wages, • 401K Benefits with match program, • Paid Holidays, • Paid Vacation, • Health Plan for team members and their families, • Incentive Programs, • Marketplace Chaplains, • On staff National Certified Counselor, • Opportunity for professional growth and developmentRequirements:, • A current EPA certification and State registered. Nate certification and State certification is a plus., • At least 3 years of commercial HVAC experience preferred, • You must be able to lift up to 50 pounds; be able to push, pull, carry or maneuver heavier items (with additional manpower or appropriate devices); carry ladders; work from heights, work in small spaces., • Demonstrate knowledge and skills for HVAC installation, maintenance, repair of systems, and equipment., • Ability to pass a drug test, background check, driving record check, and physical fitness test., • Must have a valid driver’s license., • Authorized to work in the United States., • Passion for helping others. Present a professional, positive, and helpful attitude at all times

Job Description Heavy Equipment Diesel Technician / Mechanic (Field & Shop) Are you an experienced and highly skilled Diesel Technician ready to tackle a diverse range of heavy construction equipment? If you have a strong work ethic, are enthusiastic about your craft, and thrive in both shop and field environments, this is the perfect opportunity for you. We pride ourselves on a positive work atmosphere where our equipment rental department collaborates closely to achieve daily tasks. This role offers the chance to grow your expertise while benefiting from comprehensive support and a rewarding work environment. What You'll Do: • Perform minor and major repairs on various makes and models of heavy construction equipment., • Conduct regular preventative maintenance (PM) and periodic maintenance to ensure equipment reliability., • Execute diagnostic tests on equipment, utilizing proprietary manufacturer communication software as needed., • Collaborate effectively with colleagues and management to accurately diagnose problems and plan efficient repairs., • Maintain accurate records of all repairs performed on vehicles and equipment., • Manage parts inventory and maintain cleanliness within the shop area. What We're Looking For: • 5+ years of proven experience as a Diesel Mechanic, specifically with heavy construction equipment., • In-depth knowledge of Heavy Equipment Hydraulics and Electrical systems, with strong troubleshooting capabilities., • Ability to diagnose issues using manufacturer software., • Capable of lifting up to 45 pounds., • Excellent reading and writing skills., • Proficiency in basic computer operations., • A valid Driver's License (CDL Class A is a plus)., • Demonstrated strong work ethic and enthusiasm in the workplace., • Operates with the highest level of integrity, is humble, and follows directives. Benefits & What We Offer: • Competitive Pay commensurate with experience, plus Bonus Pay., • Comprehensive Benefits Package: Health, Dental, Vision, Life Insurance, Short-term, and Long-term Disability., • 401(k) with company match., • Paid Time Off (PTO)., • Opportunities for training and paid ASE Certifications., • Company-provided uniforms and special tooling., • Assistance with moving your toolbox if needed., • A positive, team-oriented work environment. This role requires a blend of field and on-site work at our yard. If you're a skilled Diesel Technician seeking a supportive environment where your expertise is valued, we encourage you to apply!

Job DescriptionPosition Description: Are you ready to roll up your sleeves and make a real impact in the world of commercial kitchen repair? At Day & Nite Ameriserve, we’re seeking a skilled and motivated Service Technician to join our growing team. If you’re passionate about troubleshooting, solving complex problems, and keeping kitchen equipment running smoothly for top-tier restaurants, hotels, and more, we want to hear from you! The ideal candidate is prompt and reliable, has superior support skills and excellent communication. He/she will have a proven track record of client satisfaction and is motivated to provide superior service. Company Overview: We are an excellent-oriented company that proudly serves Alabama, Georgia, Tennessee, the Carolina's, and Florida area with over 30 years of combined experience. We are a business that provides exceptional quality in the commercial/industrial in HVAC, Refrigeration, Commercial Kitchen Equipment repairs, installation, and maintenance. Ameriserve is on a mission to lead the industry by investing in technicians and owner-operators with expertise and character. We are best in class equipped with industry leading technology, training, training and safety standards. We go above and beyond with proactive, step-above service. Benefits: Competitive salary and performance-based bonuses Salary range is based on technical knowledge and years of experience Health, dental, and vision insurance Retirement plan with company match Paid time off and holidays Company vehicle and tools provided Ongoing training and professional development opportunities Job Overview: We are seeking a skilled and motivated Service Technician to join our team. The ideal candidate will have extensive experience in repairing and maintaining commercial kitchen equipment, excellent troubleshooting skills, and a strong commitment to providing exceptional customer service. This role involves diagnosing, repairing, and servicing a variety of commercial kitchen appliances and systems to ensure optimal functionality and compliance with industry standards. Responsibilities: Equipment Repair and Maintenance: Diagnose, repair, and maintain a wide range of commercial kitchen equipment, including ovens, walk in coolers/freezers, dish machines, fryers, mixers, tilt skillets, and HVAC systems Support the client: Oversee all network services and perform tests on equipment and circuits. Troubleshoot issues and resolve any requests or concerns that come up in a timely manner. Perform tests to ensure systems are error-free Customer Service: Maintain relationships with customers and follow company guidelines Troubleshooting: Identify and troubleshoot mechanical, electrical, and gas related issues with commercial kitchen equipment Requirements: High school diploma or GED required; bachelor's degree or certification preferred Experience a minimum of 2-5 years in repairing and maintaining commercial kitchen equipment Ability to build strong relationships with the customer and display excellent communication skills Ability to manage your workflow in a timely and consistent manager Ability to lift to 55 pounds Problem-solving skills and mechanical aptitude Preferred relevant certifications such as EPA 608, CFESA (Commercial Food Equipment Service Associate) in gas, electrical, steam, refrigeration, or electrical Must have a valid driver's license with a clean driving record as outlined with our company policy Must be able to pass a satisfactory background and drug screening Computer skills including Microsoft office Knowledgeable about all safety requirements Physical Requirements: Ability to lift and carry up to 50 to 75 pounds; frequently lift and or move up to 100 pounds with assistance and heavy lift equipment Comfortable working in various environments, including confined spaces and heights Ability to stand, walk, and bend for extended periods and climb up and down ladders Extensive daily travel to work site locations Exposure to electrical, steam, and high heat units that require extreme caution and safety equipment Ameriserve is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. $30.00 - $40.00 Hourly

Job DescriptionCompany Description Cook’s Pest Control, Inc., a family-owned business, has over 300,000 customers, 1,700+ employees and 41 locations. Cook’s has been servicing customers for almost 100 years and is known throughout the Southeast for their integrity, community involvement, and commitment to excellence. With that kind of reputation, it’s no wonder we have been named one of the most successful Pest Control companies in the United States! Do you want to work for a company that values Faith, Family and Community? Do you need great pay and benefits? Would you enjoy a flexible, independent work environment? If the answer is YES, start a rewarding career as a Pest Control Technician with Cook’s Pest Control, Inc. TODAY! Job Description • Driving company vehicle directly to customer locations from your home; return home after last appointment, • Contacting customers to schedule pest control/termite service, • Mixing products and loading equipment into a company service vehicle, • Administering treatments, install preventative products and/or service bait/termite stations, • Collecting payments from customers, • Completing inspections and recommending solutions for pest/termite problems, • Visiting a customer to remedy a complaint or service issue, • Prospecting for new business leads, • Sometimes, Saturday and evening work is requiredQualifications, • No experience? No problem! Cook’s offers the best training in the industry!, • High School Diploma or GED, • Valid Driver’s License, • Excellent Communication Skills, • A Great Attitude and Work Ethic, • An acceptable Drug Test, Criminal Background check and Driving Record Additional Information Along with a great place to work, Cook’s employees enjoy: • Company Provided Vehicle and Gas Card (for business use, upon route assignment)!, • Starting pay $18/hour with earnings potential of up to $65,000/year!, • Health, Dental, Vision, Life, Disability!, • Flexible, Independent Work Environment!, • 401(k) Retirement Plan with Company Match!, • Paid Time Off + Holidays!, • Mentorship & Advancement opportunities!, • Cook’s is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job Description U.S. Engineering Innovations has been an industry leader through constant innovation and a willingness to evolve. The construction industry changes rapidly, and we cultivate a dynamic workplace where even our newest team members can influence change and make an impact. We know that our most valuable asset is our people. Join us! As a Superintendent, you will deliver successful mechanical installation projects that make lives and communities better. Your oversight through all phases of construction will make partners want to work with you again and produce impressive financial results. The Superintendent's primary purpose is to provide on-site administrative and technical management of field related activities on construction projects. Principal Duties and Accountabilities: • Provide technical assistance, interpret drawings, and recommend construction methods and equipment., • Build relationships with the project team (both in house and with outside partners), providing leadership and guidance., • Responsible for project profitability through field performance and site expenditures, • Assess any risk factors, making sure you meet safety, schedule and quality expectations., • Complete some paperwork, though much of that is completed digitally with our internal document workflows. Education: • Bachelor’s Degree in Construction Science Management, Architectural Engineering, or Mechanical Engineering preferred. Equivalent combination of mechanical field and leadership experience will be considered. Experience: • Minimum of 5 years of experience in mechanical construction industry., • Prior experience in role assisting with project management or field leadership preferred. Knowledge, skills, and abilities: • Ability to maximize performance of project team through innovative and effective management techniques., • Superior communication and interpersonal skills, such as diplomacy, persuasion, etc. are essential to develop and foster effective professional relationships., • Time management and organizational skills., • Basic level of financial acumen necessary to manage project budget/performance., • Knowledge of the following computer programs: MS Word, Excel. Experience with project management software a plus., • Strong problem-solving, negotiation, and conflict-management skills., • Ability to navigate a construction site. Physical and/or travel demands: • Ability to travel to all job sites for Innovations across multiple states. Benefits and compensation: • The range for this position has been established at $56.80 - $73.20 and is US Engineering Innovations good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty and training., • Your total compensation will go beyond the number on your pay check. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line. To apply, please visit https://www.usengineering.com/careers/job-postings/. This position will close on May 31st, 2026. U.S. Engineering Innovations is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering Innovationsis compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. IND# Powered by JazzHR IO9Hlo5b9F

Job Description D7 Pneumatics LLC is seeking an experienced Civil Construction Concrete Supervisor to oversee and help manage our civil concrete projects. The ideal candidate will have a strong background in supervising crews and working with concrete. As a Concrete Supervisor at D7 Pneumatics LLC, you will be responsible for ensuring that all projects are completed on time, within budget, and to the highest quality standards. You will lead the crew on-site, lay out slabs, and ensure that all operations follow safety and project specifications. Key Responsibilities: • Supervise and manage construction crews, • Interpret and read blueprints for layout and project specifications., • Ensure proper preparation, pouring, and finishing of concrete slabs., • Perform site assessments and ensure compliance with project timelines and quality standards., • Ensure the safe operation of equipment and adherence to safety protocols., • Provide clear communication with project managers, clients, and crew members., • Troubleshoot issues and provide solutions to ensure smooth project flow., • Maintain a clean and organized work site., • Ensure that all work is completed according to specifications and within project timelines. Required Qualifications & Experience: • 3-5 years of experience supervising crews in concrete and dirt work., • Strong ability to read and interpret blueprints., • Experience laying out concrete slabs., • Ability to travel for various job sites as needed., • Reliable transportation to and from job sites., • Fluency in both English and Spanish (speaking, reading, and writing)., • Strong leadership, communication, and problem-solving skills., • Ability to work well under pressure and handle multiple tasks simultaneously., • A commitment to safety and quality workmanship.

Job Description Mechanical Foreman A growing commercial construction and operational technology company is hiring a hands-on Mechanical Foreman to support commercial building projects within 30 miles of Montgomery, AL. This role is ideal for a mechanically strong field lead who can direct small crews, keep installation work moving, solve practical jobsite issues, and support high-quality commercial mechanical execution. The best-fit candidate has commercial mechanical construction experience and can work across mechanical rooms, piping, ductwork, supports, hangers, equipment setting, pumps, fans, motors, valves, rigging support, startup support, testing, balancing, commissioning support, punch lists, and commercial building infrastructure. Location: Within 30 miles of Montgomery, AL Start Date: First week of September Schedule: Field construction schedule; overtime may be available based on project needs Work Setting: Primarily onsite at commercial construction jobsites in the Montgomery area, with coordination through the Mobile, AL home office Role Type: Contract-to-hire with potential to be hired on full time day 1 based on skill set and candidate needs Openings: 1 Pay Rate: Depends on candidate skill set, leadership ability, and commercial mechanical field experience Travel: Primarily local Montgomery-area work; may include occasional travel to Mobile, AL and possible overnight stays Growth Opportunity: This is a strong opportunity to join a young, founder-led company that is growing quickly and building out its commercial mechanical and operational technology capabilities. Strong field performers can grow with the company as project volume, leadership needs, and technical service offerings expand. Benefits • Opportunity to join a 1.5-year-old, founder-led company growing faster than projected., • Holidays paid., • $300 vehicle expense monthly., • IRS rate paid for mileage., • Medical, dental, and vision benefit options., • Recruiter support throughout the assignment., • Overtime. Responsibilities • Lead small mechanical crews, apprentices, interns, helpers, and less-experienced field employees., • Help mentor and train the Montgomery intern program in safe, professional commercial mechanical field practices., • Perform hands-on commercial mechanical installation, troubleshooting, repair, maintenance, and startup support., • Work across mechanical rooms, piping, ductwork, supports, hangers, equipment pads, pumps, motors, fans, belts, bearings, valves, and related building infrastructure., • Support equipment setting, rigging coordination, layout, alignment, and field installation., • Read and interpret blueprints, specifications, submittals, shop drawings, and project documentation., • Coordinate daily work with Mechanical Superintendents, Project Managers, customers, subcontractors, and other trades., • Track material needs and communicate shortages, changes, conflicts, or jobsite issues., • Support testing, balancing, commissioning support, punch list completion, and closeout activity., • Follow OSHA, company, customer, and jobsite safety requirements., • Maintain clean, organized, and safe work areas., • Model craftsmanship, reliability, professionalism, and strong jobsite conduct. Qualifications • 4+ years of commercial or industrial mechanical construction experience preferred., • Prior foreman, lead mechanic, senior journeyman, or informal crew-lead experience preferred., • Strong commercial mechanical troubleshooting ability., • Experience with piping, ductwork, mechanical rooms, supports, hangers, equipment setting, pumps, fans, motors, valves, repairs, and maintenance., • Ability to read construction drawings, specifications, submittals, and shop drawings., • Strong field problem-solving skills and willingness to work across different commercial mechanical scopes., • Valid driver’s license required., • Willingness to travel occasionally, including possible trips to Mobile, AL., • Ability to work outdoors, climb ladders/scaffolding/rooftops/aerial lifts, lift up to 75 lbs, and work in mechanical rooms, rooftops, attics, crawlspaces, and active jobsites. Preferred Qualifications • EPA 608 certification., • OSHA 10 certification., • Experience mentoring apprentices, interns, helpers, or junior field employees., • Experience supporting startup, testing, balancing, commissioning, or punch list work., • Experience with commercial facilities, healthcare, education, municipal, aviation, industrial, or manufacturing building environments., • Experience in a smaller or growing company where field leaders wear multiple hats and help build process.

Job Description Federal Construction Professionals – QCM, Superintendent, PM Use the link below to Apply! https://hiring.elitercservices.com/fcc-2046 Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Currently looking for Quality Control Manager Construction Superintendent Project Manager Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form for fastest review Use the link below to apply! https://hiring.elitercservices.com/fcc-2046 We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Job DescriptionWork Location: Jacksonville, FL (Traveling) Job Responsibilities • Provide onsite supervision and be responsible for the proper coordination and timeliness of the work and for the proper workmanship of all trades., • Provide safety oversight to ensure compliance with OSHA and EM 385-1-1 regulations., • Responsible for keeping a clean and safe working environment., • Schedule and coordinate all subcontractors and material suppliers., • Attend all pre- construction site visits, pre-final inspections, and final inspections., • Communicate and direct the efforts of those performing the work., • Conduct weekly or bi-weekly QC / Progress meetings., • Perform USACE EM385 three phases of control. Required Qualifications • 5+ years’ experience performing as a project manager/superintendent for a general contracting firm overseeing multi-discipline commercial and industrial construction projects with a premium being placed on managing government construction projects., • Strong leadership abilities and interpersonal skills; excellent verbal and written communication., • Proficient ability to Read / Interpret blueprints and project specifications., • Computer literacy (Excel, Word, PowerPoint, MS Project, Bluebeam, etc.)., • Ability to create project schedules, pre-construction, and product submittals are a plus as well. (Knowledge of MS Project, Primavera P6, Smartsheet)., • OSHA 30-hour training with Five (5) years of continuous construction industry safety experience in supervising/ managing general construction (i.e., managing safety programs or processes, or conducting hazard analyses and developing controls), • First Aid/CPR., • Must have the ability to obtain a Security Clearance: Pass Background Check – Secret Clearance preferred. Preferred Qualifications • USACE QCM for Contractors, • NAVFAC ECATTS, • EM 385 40-hr, • HAZWOPER Training We Offer • Competitive pay, • Yearly Bonus’s, • Advancement opportunities, • Insurance Re-Imbursement, • 401K, • Company Vehicle, • Fuel Card, • Travel Per Diem, • Paid Vacation Job Type: Full-time License: • Driver's License

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Position Overview The Mobile Operating Engineer is a hands-on technical role responsible for operating, maintaining, and repairing building mechanical systems across multiple client properties. This position requires travel between assigned facilities to ensure optimal performance of HVAC, plumbing, electrical, and other building systems. Key Responsibilities System Operations & Maintenance: The engineer operates and maintains heating, ventilation, air conditioning, and refrigeration systems to ensure building comfort and energy efficiency. They perform preventive maintenance on mechanical equipment including boilers, chillers, cooling towers, air handlers, pumps, and motors according to established schedules. Regular monitoring of building automation systems and energy management systems helps identify and resolve operational issues proactively. Troubleshooting & Repairs: When equipment malfunctions occur, the engineer diagnoses problems and performs repairs on mechanical, electrical, plumbing, and HVAC systems. They respond to emergency calls and service requests from multiple locations, coordinating with property management teams and tenants to minimize disruptions. The role requires determining when to escalate issues to specialized contractors or vendors. Compliance & Safety: The engineer ensures all work complies with local, state, and federal regulations including building codes, safety standards, and environmental requirements. They maintain accurate logs of equipment operation, maintenance activities, and work orders in computerized maintenance management systems. Safety protocols must be followed consistently, including lockout/tagout procedures and proper use of personal protective equipment. Multi-Site Coordination: Travel between assigned properties is a core aspect of this role, requiring effective time management and route planning. The engineer prioritizes work orders across locations, maintains adequate tools and supplies in their service vehicle, and communicates status updates to facility managers and clients at each site. Required Qualifications Education & Certification: A high school diploma or equivalent is required, with technical training in building systems, HVAC, or related fields strongly preferred. Valid stationary or universal engineer's license appropriate to the jurisdiction is typically required. Additional certifications such as EPA Universal Refrigerant Handling, boiler operator's license, or electrical certifications are often necessary depending on local requirements. Experience: The position typically requires 3-5 years of experience in building maintenance, facilities operations, or a related technical field. Experience with commercial building systems, building automation systems, and computerized maintenance management software is valuable. Skills & Competencies: Strong mechanical aptitude and troubleshooting abilities are essential. The engineer must read and interpret blueprints, schematics, and technical manuals. Effective communication skills enable coordination with multiple stakeholders including property managers, tenants, and contractors. Physical capability to lift heavy equipment, work in confined spaces, climb ladders, and perform tasks in various weather conditions is required. A valid driver's license with a clean driving record is necessary for travel between properties. Working Conditions: This role involves regular travel to multiple client sites within an assigned territory, working in mechanical rooms, rooftops, and various indoor and outdoor environments. The position may require on-call availability for emergency response, including evenings, weekends, and holidays. Physical demands include standing, walking, bending, lifting up to 50+ pounds, and working at heights or in confined spaces. Reporting Structure: Regional Facilities Manager or Service Operations Supervisor Location: Montgomery, AL (Territory-based with multiple client sites) Estimated compensation for this position: 62,400.00 – 80.000.00 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Work Shift: 1st shift with on-call rotation responsibilities Client: AT&T This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site –Montgomery, AL If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our _. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy _. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

Job Description If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Part Time Automotive Technician position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. Wages: $18.00 per hour The Part Time Automotive Technician is the second level within the Hertz Corporation for our maintenance team. In this role you will be performing preventative maintenance, minor repairs, and inspection. Educational Background: • High School Diploma or equivalent preferred Professional Experience: • At minimum one (1) years of vehicle maintenance experience, • Preferred prior experience with automotive repair (personal or professional) Knowledge: • Must be able to perform vehicle repairs with oversight, • Ability to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: • Must have tools to perform necessary repairs, • Must have a Valid Driver’s License

Job Description $15 - 16.50 hourly Medical, Dental, Vision, Disability, Life, 401(k), Tuition Reimbursement Assistance Available. 8 paid holidays, and Accrued PTO available at 30 days! COMPANY Conner Industries, Inc. is a leading provider of custom wood packaging and integrated packaging solutions, serving customers across a wide range of industrial markets. Supported by our vertically integrated industrial lumber capabilities, we operate 18 manufacturing locations nationwide. With more than 40 years in the industry, Conner continues to deliver reliable, tailored packaging solutions that meet the demands of our customers. KEY JOB RESPONSIBILITIES Preparing and assembling packaging using multiple material sources such as corrugate, foam, wood, glass, repack and other materials. Requirements DUTIES AND REQUIREMENTS • Check components for quality., • Read and interpret job orders., • Must be self-motivated and meet the daily expectations of the supervisor., • Use good judgment., • Learn and understand differences in material uses and qualities., • Must be able to perform routine maintenance, repairs, and adjustments to meet quality specifications and industry standards., • Actions should ensure a safe and productive work environment, including housekeeping, for yourself and co-workers., • Maintain an acceptable attendance record., • Must be able to work in a team environment., • Perform other duties that may be assigned. QUALIFICATIONS, EDUCATION & EXPERIENCE • Manufacturing experience preferred., • Experience with air tools including nail guns and other manufacturing tools., • Able to read and interpret job orders., • Able to listen and communicate effectively with co-workers, customers and management, and respond to common inquiries or complaints., • Able to apply basic mathematical concepts like addition, subtraction, multiplication, and division to such tasks as job order verification., • Able to use and read a standard and/or metric tape measure., • Able to apply commonsense understanding to carry out detailed written or oral instructions., • Must be self-motivated and able to make limited and independent judgments based on given alternatives., • Able to define problems, establish facts, and draw valid conclusions., • Able to interpret an assorted number of tasks or instructions. PHYSICAL DEMANDS While performing the duties of this job, the employee is required to stand 100% of the time. The employee is required to use hand to finger, handle, or feel objects, tools, or controls in a fast pace environment. The employee is required to reach with hands and arms; stoop, kneel, crouch and talk or hear. The employee is required to use repetitive motions. The employee must regularly lift and/ or move up to 40 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, peripheral vision and the ability to focus. WORK ENVIRONMENT While performing the duties of this job, the employee will work in an indoor and partial outdoor manufacturing environment. The noise level is usually moderate to high and requires the use of hearing protection. The employee is required to wear PPE. The employee may be exposed to weather conditions prevalent at the time. The work environment is structured, and lunches and breaks are regulated. Must notify supervisor or group leader when leaving work area. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change. EEO Statement Conner Industries does not disqualify applicants that test positive for THC on the pre-employment drug screen. As permitted by state law, applicants being considered for positions with the following responsibilities: CDL Drivers, Forklift Operators, Sales, Maintenance, Management, and all Corporate positions, must pass a drug and alcohol test, done through an outside vendor, Quest Diagnostics, before beginning work in that position. Refusal to submit to testing will result in disqualification for the desired position. Conner Industries provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Conner Industries complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance, • Paid Time Off - Accrued Immediately, Available at 30 days, • 8 Company Paid Holidays, • Short Term & Long Term Disability, • Tuition Reimbursement Program - Including Trade Schools, • Training & Development

Job DescriptionSalary: The Rough Fab Assembler (RFA) is responsible for assembling equipment in preparation for wiring, testing, and final assembly. The RFA will fulfill many roles within the process of assembling electronics equipment. The RFA will assemble off-the-shelf OEM equipment and will integrate custom panels and custom brackets to create unique assemblies per project needs. The RFA will receive shipments, distribute parts, organize parts by project, ship assemblies, maintain warehouse, maintain tools and equipment used in the process, and fulfill any other tasks as required by supervisors and management. Rough Fab Job Duties & Responsibilities Read and understand assembly drawings Ensure that all required parts for assembly are available Mark cutting lines and drilling holes on materials Confirm proper fitting and alignment of materials to be assembled Maintain production schedule Maintain clean and organized work area Clean and maintain tools Assemble parts in equipment racks Prepare packaged assemblies for shipment Receive packages Load and ship packages and assemblies Obey safety requirements Requirements Proven work experience as a Fabricator Good dexterity Attention to detail Good organizational skills Ability to lift 50 lbs. Clean work area and warehouse Drivers license with clean driving record Physical stamina Ability to read and comprehend assembly drawings Proficiency with operating the following hand tools: • Drill, • Screw Gun, • Circular Saw, • Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F/Veteran/Disabled

Job DescriptionPosition Summary As a Welder you will be responsible for performing high mix / low volume manual TIG welding of stainless steel, mild steel, and aluminum within a high-quality medical device manufacturing environment. Shift: 11:00pm-7:00am Monday - Friday What You'll do as a Welder • Set up and operate welding equipment using prescribed methods and procedures to weld parts with acceptable tolerances and standards., • Build weldments through manual layout and manual surface prep processes when required., • Read and interpret welding blueprints, including standard welding symbols, travelers, and other work instruction documents., • Position parts to be joined using fixtures and other holding or positioning devices., • Use required measuring instruments and gages to check and ensure parts meet dimensional requirements., • Assist in problem-solving activities., • Capable of mentoring/ training Associate Welder & Welder I, • Capable of fitting, purging, and welding complete joint penetration (CJP) welds, • Ability to troubleshoot welding equipment and materials and fixturing., • Capable of performing visual welding inspection., • Ability to interpret AWS standards and welding symbols., • Ability to produce all product lines within the designated area., • Assist the Senior Welder with a review of all standard work within the designated area., • Capable of mentoring/training Welder IIThe Experience, Skills and Abilities Required: • High School Diploma or GED., • 3-5 years of welding experience required., • 2 years of experience working in a solid metal fabrication/machining environment, • Must be able to use prescribed manual processes in TIG welding of stainless, mild steel, and aluminum., • Must be able to use precision measuring instruments and gages. Preferred: • Welding experience in flux core, MIG, stick, carbon steel, preferred., • Certification in GTAW (TIG) preferred. Other: • Must have strong math and troubleshooting proficiency and basic computer skills., • Must be able to read and interpret welding blueprints, including all standard welding symbols.What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Here is just a brief overview of what we offer: • Market Competitive Pay, • Extensive Paid Time Off and (9) added holidays, • Excellent Healthcare, Dental and Vision Benefits, • Long/Short Term disability coverage, • 401(k) with company match, • Maternity & Paternal Leave, • Additional add-on benefits/discounts for programs such as Pet Insurance, • Tuition Reimbursement and continued educations programs, • Excellent opportunities for advancement and stable long-term career You should be proficient in: • Blueprint Reading Machines & technologies you'll use: • MIG Welder, • TIG Welder, • Stick Welder

Job DescriptionAre You the Welder Others Turn to for the Tough Jobs? Do you excel at manual TIG on stainless, mild steel, and aluminum? Can you move confidently through a high-mix, low-volume environment and still hit exacting medical device standards? If yes, read on. Your Mission Own the quality of every pass you make. From fit-up to final visual inspection, your work helps ensure the reliability of products used in critical healthcare settings. Work Hours Monday–Friday, 11:00pm–7:00am What Will You Be Doing? • Setting up and running welding equipment by following prescribed methods and procedures to achieve tight tolerances and meet standards., • Building weldments using manual layout and manual surface preparation as needed., • Reading and interpreting blueprints, welding symbols, travelers, and work instructions to plan and execute work., • Positioning parts using fixtures and other holding/positioning devices for accurate assembly and weld access., • Verifying dimensions with precision measuring instruments and gauges., • Jumping into problem-solving activities to remove barriers and improve flow., • Mentoring and training Associate Welder, Welder I, and Welder II colleagues., • Fitting, purging, and producing complete joint penetration (CJP) welds., • Troubleshooting welding equipment, materials, and fixturing to correct issues., • Performing visual welding inspections to confirm quality., • Interpreting and applying AWS standards and welding symbols throughout your work., • Producing all assigned product lines within your designated area., • Supporting the Senior Welder in reviewing all standard work to drive consistency and improvement.What You Need to BringRequired, • High School Diploma or GED, • 3–5 years of welding experience, • 2 years in a solid metal fabrication or machining setting, • Demonstrated manual TIG (GTAW) skill on stainless, mild steel, and aluminum, • Ability to use precision measuring instruments and gaugesPreferred, • Exposure to flux core, MIG, stick, and carbon steel, • GTAW (TIG) certificationPlus, • Strong math and troubleshooting skills and basic computer proficiency, • Ability to read and interpret welding blueprints and all standard welding symbolsEquipment You’ll Run, • MIG Welder, • TIG Welder, • Stick WelderRewards & Benefits We support your health, well-being, and financial goals with a comprehensive package: • Market Competitive Pay, • Extensive Paid Time Off and 9 added holidays, • Excellent Healthcare, Dental, and Vision Benefits, • Long/Short-Term Disability coverage, • 401(k) with company match, • Maternity & Paternal Leave, • Additional add-on benefits/discounts such as Pet Insurance, • Tuition Reimbursement and continued education programs, • Advancement opportunities and a stable, long-term career path If you’re ready to put surgical-grade precision into every weld and share your knowledge with the team, we’re ready for you.

Job Description Automotive Technician / Mechanic – Montgomery, Alabama A busy shop, steady workflow, and a service department that actually respects the techs who keep it running. This dealership in Montgomery, AL is looking for a skilled, motivated Automotive Technician who takes pride in doing the job right the first time. If you want a shop with real leadership, real support, and real opportunity, this one delivers. What You’ll Do • Diagnose, repair, and maintain a wide range of vehicles with accuracy and efficiency, • Communicate clearly with service advisors regarding findings and recommended repairs, • Document all work performed and follow OEM procedures, • Stay current on technical bulletins, repair standards, and best practices, • Maintain a clean, organized workspace and follow all safety guidelines, • Contribute to a positive, teamoriented shop cultureWhat Makes You a Strong Fit, • Experience as an Automotive Technician, Mechanic, or Diagnostic Tech, • Strong mechanical and electrical diagnostic abilities, • Familiarity with OEM systems, scan tools, and modern repair procedures, • Ability to work independently and as part of a highperforming team, • Valid driver’s license and clean driving record, • ASE or OEM certifications are a plus, but not required — experience mattersWhat This Role Offers, • A respected dealership with consistent workflow and strong leadership, • Competitive pay based on experience and certifications, • Flatrate or hourly options depending on background, • Access to training, certifications, and advancement opportunities, • A clean, wellequipped shop with solid parts support, • A team environment that values skill, reliability, and professionalism You are applying through CarGuys Inc., North America’s #1 automotive recruiting firm. Your application is 100% confidential and will be reviewed by our recruiting team before being presented to the hiring manager. Your information is never shared without your approval. Automotive Technician, Auto Mechanic, Diagnostic Technician, Dealership Technician, ASE Technician, Master Tech, Flat Rate Technician, Alabama Automotive Jobs, Montgomery Alabama Careers

Job DescriptionCompany Description BMW of Montgomery, located in Montgomery, AL, has immediate opportunities for skilled technicians to join our team and become part of the prestigious BMW family! This is a fantastic chance to work in a state-of-the-art facility, receive advanced training, and be a part of a dynamic environment focused on excellence in automotive service. We're looking for motivated technicians passionate about quality work and career growth. If you're ready to take your skills to the next level, this is the perfect opportunity! Job Description As a BMW Technician at BMW of Montgomery, you will be at the forefront of automotive innovation, responsible for performing diagnoses, repairs, and maintenance on both customer and dealership vehicles. You'll work with cutting-edge diagnostic technologies and be part of a highly skilled team. Key Responsibilities: • Receive and carry out repair orders as dispatched., • Perform diagnostic services and troubleshoot to accurately determine repair needs., • Provide labor, time, and parts estimates for required repairs., • Execute high-quality, efficient repairs on various automotive systems, including engines, steering, suspension, brakes, and air conditioning, following BMW Center and Factory standards., • Conduct Quality Control checks to ensure repairs are completed to the highest standards., • Complete all necessary paperwork and documentation for repair services., • Maintain a clean, organized workspace, and ensure accountability for both dealership and personal tools., • Communicate directly and efficiently with Service Advisors and Parts Department employees to ensure seamless workflow., • Participate in continuous BMW proprietary training to enhance skills and stay updated on BMW's industry-leading technologies and processes., • Demonstrate behaviors that align with our company values in all interactions. What We're Looking For: • A passionate, skilled, and dedicated individual excited to work on The Ultimate Driving Machine., • Highly self-motivated, detail-oriented, with excellent organizational and time-management skills., • Enthusiastic about innovative technologies, with ideally some prior experience in European brand service and repair., • Committed to "Fix it Right the First Time," ensuring the ultimate customer experience Qualifications • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 5+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information All your information will be kept confidential according to EEO guidelines. #automotive #technician #mechanic #BMW #ASE

Job Description McKinnon Toyota is hiring, and we want to talk to you! Hiring an experienced Master Certified Toyota Technician. Are you an experienced Toyota Master Tech? We are looking for the best! We are a fast-growing Toyota dealership in the Birmingham/Montgomery market looking for individuals to join our team! We are your local, family-owned Toyota dealership! Proudly serving our area for over 50 years. Since opening our doors in 1964, we have strived to exceptionally serve our community and our staff. We've held true to our values while servicing our community and pursuing continuous growth. We strongly believe in continuous improvement for our employees. We've been continuing to grow, while holding true to our values of professionalism, positivity, teamwork and honesty! We strive to make our employees happy, resulting in long-term employee retention! We have technicians that have been here 10+ years. We would like to add you to our great team! At McKinnon Toyota, we strongly believe in growth opportunities for our employees and therefore offer ongoing training and strive to promote from within! Are you ready to jump-start your career and grow with our organization? If the answer is yes, apply below! We Offer: • $2,500 Sign-on Bonus, • Full Time, • Competitive Pay, • Health, Dental, Vision & Life Insurance, • 401K, • Direct Deposit, • Sundays off, • Paid vacation, • Paid instructor-led training, • Ongoing training, • Promote from within, • Excellent work environment, • Great team culture, • Family owned and operated Responsibilities: • Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards, • Diagnose cause of any malfunction and preform repair, • Communicate with parts department to obtain needed parts, • Save and tag parts if the job is under warranty of if requested by the customer, • Examine assigned vehicle to determine if further safety or service work is required or recommended, • Communicate with service advisor immediately if additional work is needed, if work outlined is not needed or if repairs cannot be completed within the promised time, • Document all work preformed and recommended on the repair order, • Road-test vehicles when required, • Participate in manufacturer-sponsored training programs, schools and events, • Keep abreast of manufacturer technical bulletins, • Supervise work of apprentice technicians as assigned, • Report machinery defects or malfunctions to supervisor, • Ensure that customers' cars are kept clean. Notify service advisor immediately of anything that has happened to change the appearance or condition of the vehicle., • Keep shop area neat and clean, • Maintain and is accountable for all dealership tools and manuals. Returns them to the proper place and in the same condition they were received., • Understand, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operate all tools and equipment in a safe manner., • Report any safety issues immediately to management. Requirements: • Must have Toyota Certifications, • Clean DMV record for previous 2 years, • Knowledge in all aspects of automotive repair and maintenance, • Fast learner, • Excellent written and verbal communication skills, • Excellent customer service skills, • Team player, • Computer literate, • Able to operate electronic diagnostic equipment, • Valid driver’s license, • High School Diploma preferred We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 350 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The Automotive Technician, reporting to the Store and Service Managers, is responsible for performing basic and advanced car maintenance and repair tasks, inspecting vehicles for potential problems, and troubleshooting issues to ensure vehicle is performing appropriately and the customer is taken care of. Primary Responsibilities include (but are not limited to): • Application of in-depth automotive repair knowledge, • Providing service of the highest quality to our customers, • Performs skilled mechanical work while analyzing and diagnosing problems, • Inspect, replace and/or repair defective parts while performing preventative maintenance on automobiles, • Continuously learn new technical information and techniques to stay abreast with rapidly changing automotive technology, • Demonstrate behaviors consistent with the company’s vision, mission, and core values in all interaction with customers, co-workers, managers, and suppliers, • Adhere to all company policies, procedures, and safety standards, • Maintain a safe, clean, and organized work areaQualifications We are looking for: • A minimum of 2 years’ automotive service, automotive mechanic, and/or engine diagnostic experience in a professional capacity, • ASE Certification preferred, but not required, • Must have Technician Tools, • Valid driver’s license, • Ability to operate and drive vehicles, • Ability to pass a pre-employment drug test and background screen, • Effective communication and interpersonal skills, • Top-notch customer service skills with a desire to build long term trust and relationships with our customers, • Willingness to work Saturdays and/or Sundays Additional Information All of your information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects, • Requires working at a production rate pace entailing the constant pushing and/or pulling of materials By completing this application, you are agreeing that you are able to meet the physical requirements listed for this role.

Job DescriptionDescription: Responsibilities: • Perform routine vehicle maintenance tasks, such as oil changes, tire rotations, and filter replacements, • Inspect and diagnose vehicle issues, including breaks, shocks, struts, and other small suspension components, • Assist with automotive repairs, check and replacing lights., • Provide excellent customer service by addressing customer concerns and answering questions if needed., • Utilize mechanical knowledge to effectively troubleshoot and resolve issues, • Use power tools and other equipment to perform necessary repairs and maintenance Drivers License is a MUST for test driving vehicles to help diagnose service issues. BASIC TOOLS is a MUST when applying. Must be comfortable working in a Fast Pace work environment. Job Type: Full-time Pay: $15.00 - $17.00 per hour (Pay based on experience) Expected hours: 40 per week Benefits: • Health insurance, • On-the-job training Schedule: • 8 hour shift, • Monday to Friday, • No weekendsRequirements:Requirements Qualifications:- Previous experience in automotive service or repair is preferred but not required • Basic mechanical knowledge and understanding of vehicle systems, • MUST HAVE YOUR OWN BASIC TOOLS for this job., • Ability to use power tools and other equipment safely and effectively, • Strong attention to detail and ability to follow instructions, • Must remain in a professional manner at all times. Note: This is an entry-level position, so training will be provided for candidates who demonstrate the willingness to learn and grow within the role.

Job Description <> McKinnon Nissan is hiring, and we want to talk to you! Hiring an experienced Master Certified Nissan Technician. Are you an experienced Nissan Master Tech? We are looking for the best! We are a fast-growing Nissan dealership in the Birmingham/Montgomery market looking for individuals to join our team! We are your local, family-owned Nissan dealership! Proudly serving our area for over 50 years. Since opening our doors in 1964, we strive to exceptionally serve our community and our staff. We've held true to our values while servicing our community and pursuing continuous growth. We strongly believe in continuous improvement for our employees. We've been continuing to grow, while holding true to our values of professionalism, positivity, teamwork and honesty! We strive to make our employees happy, resulting in long-term employee retention! We have technicians that have been here 10+ years. We would like to add you to our great team! At McKinnon Nissan, we strongly believe in growth opportunities for our employees and therefore offer ongoing training and strive to promote from within! Are you ready to jump-start your career and grow with our organization? If the answer is yes, apply below! We Offer: • Competitive Pay, • Health, Dental, Vision & Life Insurance, • 401K, • Direct Deposit, • Sundays off, • Paid vacation, • Paid instructor-led training, • Ongoing training, • Promote from within, • Excellent work environment, • Great team culture, • Family owned and operated Responsibilities: • Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards, • Diagnose cause of any malfunction and preform repair, • Communicate with parts department to obtain needed parts, • Save and tag parts if the job is under warranty of if requested by the customer, • Examine assigned vehicle to determine if further safety or service work is required or recommended, • Communicate with service advisor immediately if additional work is needed, if work outlined is not needed or if repairs cannot be completed within the promised time, • Document all work preformed and recommended on the repair order, • Road-test vehicles when required, • Participate in manufacturer-sponsored training programs, schools and events, • Keep abreast of manufacturer technical bulletins, • Supervise work of apprentice technicians as assigned, • Report machinery defects or malfunctions to supervisor, • Ensure that customers' cars are kept clean. Notify service advisor immediately of anything that has happened to change the appearance or condition of the vehicle., • Keep shop area neat and clean, • Maintain and is accountable for all dealership tools and manuals. Returns them to the proper place and in the same condition they were received., • Understand, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operate all tools and equipment in a safe manner., • Report any safety issues immediately to management. Requirements: • Must have at least 2 years of experience as a Nissan Master Auto Technician, • Clean DMV record for previous 2 years, • Knowledge in all aspects of automotive repair and maintenance, • Fast learner, • Excellent written and verbal communication skills, • Excellent customer service skills, • Team player, • Computer literate, • Able to operate electronic diagnostic equipment, • Valid driver’s license, • High School Diploma preferred We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Job Description • MUST BE ABLE TO REMOVE/REPLACE/SWAP ENGINE AND TRANSMISSIONS., • Looking for Certified Auto Technician capable of diagnosing a wide range of electrical and mechanical issues., • Having your own tools is a MUST., • VALID Driver's License required., • Our Service Tech's are paid Hourly vs Flat Rate Strong willingness to learn, take direction to task and grow., • Maintain a positive dynamic attitude with the ability to recover quickly from setbacks., • Self-motivated, goal-oriented and enthusiastic presence in a team environment, • Full-time, • Monday - Friday., • No weekends., • 8 hour shifts. Requirements: Experience: • Certified Automotive Technician: 2 years (Preferred), • Automotive Repair: 1 years (Preferred), • Mechanic: 2 years (Preferred)

Job Description Mullinax Automotive Since we opened our first dealership in 1970, we've steadily grown to one of the nation’s best dealerships, regardless of brand! Over the past few years, we've continued to build our loyal customer base, which speaks to how enthusiastic we are for the future! Today, there are 12 Award Winning Mullinax Ford, Hyundai, Genesis, Buick, GMC, Cadillac dealerships located in Washington, Florida, and Alabama. Our team enjoys training programs, a fantastic culture and opportunities for advancement, which are company-wide. Mullinax focuses to help you grow both personally and professionally. We're interested in helping your career because we know that happy employees lead to happier customers! Due to extreme growth, Mullinax Montgomery Cadillac Buick GMC has one opening for a Used Car Technician to join our Award-Winning team. PAYING TOP DOLLAR Responsibilities include but are not limited to: • Perform vehicle inspections, diagnostics, repair, and maintenance in accordance with dealer and factory standards., • Follow checklists to ensure thorough examination of all parts and systems., • Identify mechanical and electrical problems with both computerized diagnostic equipment and through visual inspection process., • Perform repairs thoroughly and accurately., • Participate in manufacturer training programs, keeping informed of changes in technology and processes., • Maintain accurate, detailed records of repairs, parts used, and time for spent for invoicing., • Communicate effectively with managers regarding necessary repairs timelines., • Maintain a clean, safe, organized work area. Qualifications for this job: • Must be at least 18 years old, • Minimum of 3+ years experience as an automotive technician preferred., • Must provide own tools, • Basic computer, email, and internet proficiency, • Strong time management skills, • Able to bend, kneel, squat, stand, and lift heavy objects as needed, • Lifting of heavy items of up to 75 pounds, • Able to withstand exposure to adverse weather conditions, chemicals, odors, dirt and dust, • Certificate from accredited automotive school., • High school diploma or equivalent, • Valid Driver’s license with an acceptable motor vehicle driving record according to dealership guidelines, • Must be able to pass background screening and drug test Benefits package for full time employees includes: • Medical, Dental, and Vision Plans, • Paid Basic Employer Life Insurance, • Additional Supplemental Insurance, • Wellness Program, • 401(k) Plan with match, • Paid Time Off, • Employee Purchase Program, • Training Programs We are a Drug Free Work Place and an Equal Opportunity Employer. Full Time Position No phone calls, please email resume