Trabajos computer engineer en Los Angeles, CaliforniaCrear alertas

The Digital Engineer will be responsible for design and verification of digital systems on a safety-critical development program. Candidate is required to have extensive knowledge of digital design and verification concepts. Candidate will possess strong communication skills as he or she will interface with our development program leads, senior scientists, engineering and manufacturing organizations throughout the program lifecycle. The individual will also have technical foresight to integrate the appropriate requirements, processes, procedures and tools as this development program will lead to the future generation of navigation, video & cockpit products. \n Basic Qualifications: \n\n • Bachelor's degree in a STEM field with 5 years of relevant experience; Master's degree in a STEM field with 3 years of relevant experience; PhD in a STEM field with 1 year of relevant experience\n, • Experience with High-Speed Digital Design and Verification\n, • Experience with FPGA/SOC/ASIC implementation (VHDL/Verilog, Synthesis, Timing Closure)\n, • Experience with design processes including hardware requirements definition, conceptual design, detailed design, verification, production transitioning\n, • U.S. Citizenship is required\n, • A current/active U.S. Government Secret Clearance is required\n, • Ability to work onsite full-time in Woodland Hills, CA\n\n \n Preferred Qualifications: \n\n • Experience with V&V technologies (System Verilog, UVM, Hardware-In-Loop)\n, • Knowledge of Computer Architecture (Bus standards, Interrupts, Memory)\n, • Experience with Model-based Engineering (MATLAB, Simulink, Fixed Point vs. Floating Point)\n, • Experience with Sensors and Digital Signal Processing\n, • Cost Account Management (CAM) certification / experience\n, • Experience with safety critical designs (DO-254)\n, • Communication, team building and facilitation skills\n\n

Lead Engineer is responsible for the supervision and coordination of all activities concerned with the general operation and maintenance work of the mechanical, electrical and craft services. Function as a working group leader in these areas. Pay: $59.90/ The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM | _ • Team Management (Multiple Properties), • Develop and assign work tickets for each team member, ensuring tasks are clearly scoped, prioritized, and completed on time., • Supporting and proving team while conducting special work assignments, • Adhere to quality levels and standard practices for all work performed., • Assist in training personnel in proper operating procedures and techniques., • Enforce all applicable safety regulations including lockout/tagout (LOTO), PPE requirements, confined space entry, and hot work permits., • Conduct regular inspections across all assigned properties to verify work quality and identify maintenance deficiencies., • operate to support team efforts regarding maintenance and operation of mechanical, electrical, and plumbing systems, • Possess adequate license requirements for the facility., • Maintain life safety and security systems., • Perform other duties and responsibilities as requested by building management., • Team management (which includes multiple locations) daily stand-up, create schedules, track PTO, training, call-offs, provide direction and/or prioritization of tasks., • Ticket system – monitoring tickets and providing metrics to client., • Sourcing – vendors, plumbing and misc. repair parts., • Vendors – on-site contact and scheduling of maintenance agreement services., • Computer skills – Outlook, Microsoft, Teams and Service Now (or other ticket system), • Maintain all boilers, heaters, pumps, valves, appurtenances and lines used in the distribution of steam and heated or processed water., • Maintain water filters, softeners, piping and pumps used in conjunction with water distribution, including all sinks, toilet bowls, supply lines, drains and water lines., • Operate, maintain and repair all types of electrical motors and engines used to power pumps, compressors and fans., • Maintain lighting maintenance., • Work with vendor to maintain proper operation during seasonal changes and recalibrate controls based on seasonal conditions to ensure energy efficient operation., • Maintain all equipment as required per the Preventive Maintenance Program. Preventive Maintenance Program will be scheduled to meet the manufacturer’s required service specifications., • Minimum 3-4+ years as a Lead/Chief Engineer, • Proven managerial experience, • Strong HVAC, mechanical, and electrical system knowledge, • Experience in healthcare / senior living environments preferred Core Competencies: • Leadership and team development, • Technical troubleshooting, • Knowledge of NYC compliance requirements, • Resident-focused service mindset Value to Client: Ensures reliable operations, regulatory compliance, and safe, comfortable environment for residents through proactive engineering leadership. About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Pay: $ 46.26/hr The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Schedule: 8 am to 4 pm, Monday – Friday Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM Team Member Benefits | _ | (Programa de Beneficios de ABM) • Operate, maintain, and repair all boilers, heaters, pumps, valves, appurtenances, and lines used in the distribution of steam and heated or processed water., • Operate, maintain and repair refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves and float valves, together with all refrigerant lines and devices used to control temperature., • Operate, maintain and repair pumps, handling brines or other secondary refrigerating liquids, together with all valves, appurtenances and lines used in the system., • Operate, maintain, and repair air compressors, together with distribution lines and all valves and devices for air control., • Operate, maintain and repair all natural and manufactured gas distribution lines, including all valves and control devices., • Operate, maintain and repair water filters softeners, piping and pumps used in conjunction with water distribution, including all sinks, toilet bowls, supply lines, drains and water lines., • Operate, maintain and repair all types of electrical motors and engines used to power pumps, compressors and fans., • Operate, maintain and repair of fuel oil systems including pumps, valves, lines, controls and fuel tanks., • Operate, maintain and repair sanitary sewer systems, including sump pumps, basins, water closets, urinals and piping., • Maintain and repair trash compactors, including electrical and hydraulic systems., • Maintain and repair kitchen equipment., • Maintain electrical power distribution and auxiliaries for the building’s lighting, mechanical, plumbing and control components including lighting maintenance., • Maintain proper operation during seasonal changes and recalibrate controls based upon seasonal conditions to assure energy efficient operation., • Maintain all equipment as required per the Preventive Maintenance Program. The Preventive Maintenance program will be scheduled to meet the manufacturer’s required services specifications., • Life/Safety and security systems - Equipment maintenance applicable in Engineer’s scope will be included., • Other duties and responsibilities as requested by Building Management., • Formal knowledge of HVAC Components (VAV’s, Air-Handlers, Pumps, unit ventilators, etc.), • Experience that is commensurate with the specific facility for the position of Building Engineer, • Ability to read and interpret blueprints., • As required, highest-level relevant state/local license for Stationary Engineer and/or HVAC, plus universal level refrigerant recovery license, • Computer skills and building automation systems experience required., • Certification meeting OSHA ACM awareness training requirements as required., • EPA 608 Certified (preferred) About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Marking Machinist Operator Department: Marking Department/ Area: Shop Floor Position Summary: The candidate will be responsible for operating press for the purpose of impression of identification in fasteners manufactured for the aerospace industry under the tightest tolerances and quality requirements. After the training period, the candidate will be responsible for machine tooling and set-up. Daily tasks: Operate the marking press machines. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Maintain work area. Keep area clean and organized with required tools and inspection gages. Follow instructions and procedures. Monitor production data and report to supervisors. Weigh count piece production. Participate in training classes as needed and required. Minimum Qualifications: • High school diploma or equivalent, • Good communications skills, • Basic math and reading skills. Reporting Relationships: Reports to Director of Manufacturing and Plant Manager Working Conditions: Repetitive manual motion, heavy physical work. Walking to monitor several machines. Lifting to 25 lbs and moving 40lb pans with dollies. Success Factors: • Ability to read a micrometer and caliper a plus, • Understand the marking operation a plus, • Bilingual a plus, • Simple blueprint reading and use of precision measuring tools, comparators and gages a plus, • Experience on marking all types of materials (such as Inconel 718, Titanium, 8740) a plus. Position Type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Grinding Operator 2nd Shift Department/ Area: Grind Position Summary: Candidates will be responsible to set-up and operate #2 size CINCINNATTI centerless grinding machine – run small batch of blanks on machine and coach trainees. · Purpose: To prepare forged blank bolts into close tolerance machined parts ready for thread rolling, machine parts per process sketch following established procedures. Essential Functions: Install grinding and feed wheels on machine, position accessory tooling, balance, dress and adjust grinding wheel, using dresser with or without cams. Operate the machine. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Coaches a trainee and monitors quality for both. · Daily tasks: Maintain work area organized with required tools, inspection gages and instructions. Monitor production data and report at end of task or shift. Weigh count piece production. Participate in required training classes. Minimum Qualifications: • High School Diploma, • Working Knowledge of machines and tools, • Some advanced arithmetic skills required. Reporting Relationships: Reports to group lead person or department supervisor. Working Conditions: All day standing, repetitive manual motion, heavy physical work at time of some set-up. Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Position type: Schedule: • 2nd shift (02:30 PM to 11PM), • 8 hour shift, • Monday to Friday Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance and full time is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Electronic Test Technician Or Electrical Test Technician If you can find any hits under “Test Engineer” at ~30-32/hr that would be another search criteria. Time is of the essence please see if anyone in your office can do a few searches, I will be very active in my email and willing to assist/filter out details or specifications, please just have them contact me. Description: Verify, inspect, test and report on electronic material and finished systems to the electrical specifications per standard procedures, guidelines, ECNs and technical drawings. • Utilize tooling, RMS metering and electrical testing equipment against required procedures, ECNs, technical specifications, electrical engineering theory and product knowledge to verify specification of the equipment and its use case., • Utilize instrumentation to perform full specification test and data collection for reporting., • Deep understanding of schematics and theory application to assist in troubleshooting and follow training and verbal instruction to perform repair and modifications. (Any education experience in computer technology, electronics or electrical engineering. (IT experience is not valid) Requirements: • 2-3 years work experience in any field, • Senior year of studies in Bachelor of Science or equivalent completed certifications/credits (we offer the ability to test out of this education requirement), • High school diploma, • Above average technical reading comprehension and writing ability, • High computer literacy and capability, • Basic understanding of Ohms Law, AC, DC, and electrical current, • Basic understanding of electrical theory, • Independently responsible work ethic

Job Description We’re seeking an energetic and detail-oriented Hotel Engineer (General Maintenance) to join our service team at Petit Ermitage, hotel known for its warmth, charm, and elevated guest experience. The Engineer is responsible for maintaining the hotel's physical facilities, equipment, and guest rooms to ensure a safe, functional, and well-maintained environment for guests and team members. This position performs preventative maintenance, troubleshooting, repairs, and general upkeep of building systems while responding promptly to maintenance requests in accordance with hotel standards. The Engineer works throughout the property, including guest rooms, public spaces, kitchen, rooftop, mechanical rooms, and exterior areas. The position requires adherence to all safety procedures while maintaining the highest standards of property appearance and operational reliability. Responsibilities • Perform preventative maintenance on hotel equipment, guest rooms, public areas, and back-of-house facilities., • Respond promptly to maintenance requests from guests and departments., • Troubleshoot and repair electrical, plumbing, HVAC, mechanical, and general building systems., • Repair and maintain lighting, doors, locks, windows, furniture, fixtures, flooring, drywall, ceilings, and paint., • Perform routine inspections of guest rooms, mechanical equipment, and public spaces to identify maintenance needs., • Maintain swimming pool and water feature equipment, when applicable., • Assist with emergency repairs and respond to facility-related emergencies, including after-hours situations as assigned., • Complete work orders accurately and in a timely manner using the hotel's maintenance management system., • Maintain accurate records of repairs, preventative maintenance, inspections, and equipment servicing., • Monitor equipment performance and notify management of repairs requiring outside vendors or replacement., • Ensure compliance with all OSHA regulations, local building codes, fire and life safety standards, and company policies., • Properly use, maintain, and store tools, equipment, and chemicals., • Maintain clean, organized, and safe work areas, mechanical rooms, and storage spaces., • Assist with room renovations, special projects, furniture installations, and event setups as needed., • Support energy conservation initiatives and recommend improvements to building efficiency., • Work collaboratively with Housekeeping, Front Office, Security, Food & Beverage, and other departments to minimize operational disruptions., • Perform other duties as assigned. What We’re Looking For • Minimum of 2 years of general maintenance or engineering experience, preferably in a hotel, resort, healthcare, or commercial facility., • High school diploma, technical school certification, or vocational training in electrical, HVAC, plumbing, or building maintenance preferred., • Basic knowledge of:, • HVAC systems, • Plumbing, • Electrical systems, • Carpentry, • Drywall and painting, • Mechanical equipment, • Building maintenance practices, • Ability to safely operate power tools, hand tools, ladders, and maintenance equipment., • Strong troubleshooting and problem-solving skills., • Ability to prioritize multiple work orders in a fast-paced environment., • Basic computer skills to complete work orders and maintenance documentation., • Excellent communication and customer service skills., • Team-oriented mindset and willingness to support operations., • While performing the duties of this job, the employee is regularly required to bend, push, pull, stand, walk, and talk or hear., • The employee frequently is required to use hands to finger, handle, or feel objects, or telephone., • Must regularly lift and/or move up to 50 pounds., • Standing or walking during entire 8-hour or longer shifts., • Ability to read maintenance manuals, blueprints, and technical diagrams., • Commitment to workplace safety and safe work practices., • Professional appearance and demeanor., • Ability to provide courteous service while interacting with guests and colleagues., • Flexible scheduling availability including evenings, weekends, and holidays. Why Join Petit Ermitage • Work in one of Los Angeles’ most unique boutique hotel environments., • Supportive and collaborative guest services team., • Opportunities to grow within hotel operations., • Competitive pay and consistent scheduling., • Staff meals and employee perks. To Apply If you enjoy creating a warm first impression, keeping operations running smoothly, and being part of a service-focused team, we would love to meet you. Please apply directly by visiting our careers page at PetitErmitage.com Petit Ermitage is an Equal Opportunity Employer: Minorities / Females / Veterans / Disabled.

Job Description OVERVIEW Must be a US Citizen Duration - 6 month contract position with potential to be extended or converted W2 with full benefits Customer and contract specific training will be required and provided. Location - NASA Jet Propulsion Laboratory, Pasadena, CA (onsite) Offer contingent on ability to successfully pass a background check and drug screen Salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target for new hire salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. JOB DESCRIPTION This is an opportunity to be a Mechanical Design Engineer in the Engineering Design group at JPL, which engages in the engineering and design of advanced spacecraft, instruments and robotic mechanisms for exploration of the solar system. Some challenges you'll tackle • Performing as a Design Engineer for JPL on a spacecraft, instrument or robotic project., • Creating complex CAD models, assemblies and engineering drawings., • Working with world class engineers and participating on teams in a highly collaborative environment., • Developing and running configuration trades on the mechanical system of a spacecraft project., • Interfacing with space science experts, analysts, manufacturing engineers, and project staff., • Performing conceptual spacecraft design for feasibility and cost estimates of future missions. REQUIRED SKILLS Experience and knowledge in the following areas: • Mechanical design of spacecraft primary and secondary structures, mechanisms and instruments., • Engineering CAD (Computer-Aided Design) tools such as Siemens NX (preferred), CATIA or Creo., • Creating engineering drawings using the ASME Y14.100-2017 standard., • Creating detail drawings, assembly drawings, interface drawings and source control drawings., • Geometric dimensioning and tolerancing (GD&T) using ASME Y14.5-2018., • Application of advanced principles, theories, concepts and techniques in solving mechanical engineering problems., • Adept at performing trade studies and developing conceptual configurations., • Aerospace fabrication processes., • Aerospace material selection., • PLM (Product Lifecycle Management) tools such as Teamcenter (preferred), Enovia or Windchill. DESIRED SKILLS • TS/SCI

Job Description Signing Bonus - Immediate Start Onsite | M-F | Van Nuys, CA > Chatsworth, CA in Fall 2026 ITAR Compliance Required - US Citizens or legal US permanent Residents Compensation $90K-$115K Summary The Quality Engineer is responsible for applying advanced Quality Assurance principles to optimize processes, strengthen system reliability, and ensure consistent production of high-quality products. This role develops and maintains procedures that align with regulatory, industry, and customer requirements while driving continuous improvement across operations. The QE must expertly interpret customer specifications and identify or develop the appropriate tools, equipment, and methodologies needed to ensure full compliance and exceptional performance. Primary Responsibilities • Conduct comprehensive audits of the Quality Management System and collaborate with cross-functional teams to establish, train, and develop in-house auditors, • Participate in external audits of ESC suppliers, ensuring alignment with contractual and regulatory requirements, • Support the QC Inspection Lead by interpreting and applying acceptance criteria to ensure consistent and accurate inspection outcomes, • Work closely with Engineering, Manufacturing, and Supply Chain to drive compliance, strengthen processes, and promote continuous improvement, • Provide support for customer source inspection activities and ensure readiness of associated documentation and product, • Develop impactful corrective and preventive actions (CAPAs) that enhance system performance and long-term reliability, • Manage and maintain SCAR, CAR, and ICAR activities and associated records to ensure timely closure and traceability, • Schedule, coordinate, and facilitate Customer, ISO 13485, NADCAP, and AS9100 audits, including preparation activities and resource allocation, • Develop, refine, and maintain robust procedures that uphold best practices and meet ISO 13485, NADCAP, and AS9100 requirements, • Review, train, and support personnel in the preparation and accuracy of AS9102 First Article Inspection Reports (FAIR), • Lead and perform Root Cause Analysis using methodologies such as 8D, 5 Whys, and Ishikawa diagrams to resolve quality issues and prevent recurrence, • Execute all responsibilities in strict adherence to established safety procedures and company safety standards Requirements • Bachelor’s degree in Engineering, Quality Assurance, or a related technical discipline, • Minimum of 7 years of experience in a Quality Engineering role, ideally within an Electronics Manufacturing Services (EMS) environment, • Demonstrated proficiency in electronics inspection methods, acceptance criteria, and manufacturing processes, • Comprehensive knowledge of IPC standards (including IPC-A-610 and IPC-A-600), AS9100D, MIL-STD-883, and related aerospace and defense quality requirements, • Strong analytical and problem-solving capabilities with a practical, hands-on approach to resolving complex quality challenges, • Proven ability to effectively train and mentor peers, direct reports, and cross-functional stakeholders, • Experience with Quality Management Systems (QMS), Statistical Process Control (SPC), Measurement System Analysis (MSA), and Six Sigma methodologies, • Exceptional communication skills with the ability to produce clear, accurate, and detailed documentation, • Highly dependable and capable of working independently with minimal supervision, • Advanced computer proficiency, including use of quality, data analysis, and productivity software, • Ability to apply Lean principles and 5S methodologies to improve efficiency and reduce waste, • Must be a US Citizen or permanent legal US resident Preferred Qualifications • IPC-A-610 Certification, • IPC J-STD-001 Certification, • Understanding of IPC WHMA-A-620, • Experience with NASA 8739 and IPC space addendum, • Lean Six Sigma Certification, • PMI PMP CertificationCompany DescriptionEstablished in 1994, Electronic Source Company (ESC) provides quick response electronic manufacturing services utilizing world-class manufacturing equipment, practices, and technology. The printed circuit board assemblies ESC builds go into end products ranging from fiber optic transmitters and transceivers to missile guidance and satellite systems. Having grown from a staff of 12 employees in 2001 to the current employment of 160+, ESC is a fast-growing and highly successful manufacturing company.Established in 1994, Electronic Source Company (ESC) provides quick response electronic manufacturing services utilizing world-class manufacturing equipment, practices, and technology. The printed circuit board assemblies ESC builds go into end products ranging from fiber optic transmitters and transceivers to missile guidance and satellite systems. Having grown from a staff of 12 employees in 2001 to the current employment of 160+, ESC is a fast-growing and highly successful manufacturing company.

Job Description Quality Engineer - Defense Search OVERVIEW Are you looking for a new career opportunity with an exciting Defense/Aerospace company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below. Immediate opening for a Quality Engineer in Brea, CA who possesses: • Bachelor's degree in engineering or a related STEM discipline; mechanical, manufacturing, or chemical engineering preferred, • 3+ years of manufacturing quality engineering experience, • Experience working in an AS9100-regulated environment, • Bilingual in Spanish is a plus FULL DESCRIPTION: The Quality Engineer will lead initiatives to improve customer satisfaction by reducing internal nonconformances, preventing customer returns, and strengthening quality processes. This position will apply continuous improvement and Six Sigma methodologies, support corrective and preventive action programs, conduct audits, and help develop quality personnel through training and mentorship. The selected candidate will be responsible for: • Applying advanced quality and Six Sigma methodologies to reduce nonconformances and prevent customer returns, • Developing and maintaining corrective and preventive action programs focused on reducing scrap and rework, • Supporting the development and delivery of training for operators and inspectors, • Mentoring quality engineering and quality assurance personnel, • Facilitating customer returns through the material review process, • Conducting internal audits and following up on corrective actions in accordance with internal and customer quality requirements, • Supporting customer representatives during quality audits and responding to corrective action requests, • Evaluating and selecting product inspection and testing equipment, • Developing and updating quality procedures and work instructions, • Training appropriate personnel on quality procedures, requirements, and processes, • Performing other duties as assigned The selected candidate will also possess: • Bachelor's degree in engineering or a related STEM discipline, • 3+ years of manufacturing quality engineering experience, • Working knowledge of AS9100 and quality assurance standards, • Demonstrated experience analyzing and resolving part and process issues, • Ability to interpret contractual, technical, and specification requirements, • Aerospace, elastomer, or plastics manufacturing experience preferred, • ASQ Quality Engineer, Quality Auditor, Quality Manager, Lean, or Six Sigma certification preferred, • Bilingual English and Spanish communication skills preferred, • Excellent verbal and written communication skills in English, • Ability to work effectively with limited supervision, • Ability to lead continuous improvement activities, • Strong organizational skills with the ability to manage multiple priorities, • Ability to meet critical deadlines in a fast-paced manufacturing environment, • Intermediate proficiency with Microsoft Office, • Strong teamwork skills and the ability to work effectively with employees and customers, • High level of motivation, initiative, and urgency, • Ability to work onsite in Brea, CA Physical Requirements: • Ability to sit and work at a computer for extended periods while reviewing drawings, specifications, technical documentation, quality data, and reports, • Ability to occasionally stand, walk, bend, reach, and move throughout office and manufacturing environments, • Ability to use hands and fingers for typing, documentation, equipment review, and the use of measurement or inspection tools, • Ability to occasionally lift, carry, or move standard engineering, inspection, production, or office materials as needed, • Ability to wear required personal protective equipment while working in production or manufacturing areas Salary Range: $95,000 to $135,000/year More information can be found at www.defensesearchusa.com. Company DescriptionTalentZok was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.TalentZok was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.

Job DescriptionSummary The Senior Superintendent is responsible for managing all field operations on the project assigned in order to achieve timely and profitable completion of work. The Senior Superintendent directly supervises Superintendents, Foremen, and Laborers/Craft workers. This position must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and client service skills. Duties & Responsibilities • Direct on-site supervision of field labor force including Superintendents, Foremen, subcontractors, and other construction related personnel., • Assist Sr. Project Manager in the supervision and responsibility of the total construction effort in accordance with design, budget, quality, and schedule., • Assist with providing technical assistance (interpretation of drawings, recommendation of construction methods and equipment, etc.) as required, including mechanical, electrical, plumbing and fire protection., • Inspect contractor or subcontract operations to ensure compliance with contract., • Review and approve trade contractor payment applications with Project Manager., • Maintain good relationships with internal and external clients, including representatives of Owner, Architect/Engineer and partners., • Develop and maintain site logistics plan, in coordination with Sr. Project Manager., • Develop quality assurance & controls; conduct quality inspections., • Coordinate site testing and inspection efforts., • Monitor costs, including labor time and material., • Communicate and enforce safety and health management program., • Demonstrate commitment to an injury-free environment through own actions and mentoring others., • Manage schedules, including preparation of detailed short-term schedules and ensuring all activities take place on or ahead of scheduled dates., • Prepare and submit Superintendents daily reports to document weather and field conditions, trade and subcontractor manpower, progress and conditions impacting the project, as well as accident reports, quality reports, etc., • Conduct subcontractor meetings., • Attend and participate in project meetings., • Provide training and education to support field Superintendents and Engineers. Qualifications & Requirements • Degree in Construction Management, Business Administration, or a closely related field preferred., • OSHA Certification., • First Aid/CPR certification., • Minimum 8 years of industry experience., • Computer knowledge and efficiency, including Microsoft Office Suite., • Knowledge of project management software programs., • Broad understanding of industry., • Familiarity with requirements of drawings and specifications and with terms and conditions of project contracts, subcontracts, and purchase orders., • Strong written and verbal communication skills., • Good math/accounting skills., • Strong management skills., • Strong ability to read drawings and specifications., • Functions effectively as part of a team., • Exhibits strong leadership qualities., • Ability to maintain discretion and confidentiality., • Delegates work appropriately., • Strong decision making/problem solving skills., • Excellent time management and organizational skills., • Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Capable of traversing over construction-type terrain when under development; moving through the construction site and the materials in place for use on the site; climbing ladders and temporary stairways; conducting visual inspections of quality of construction and materials being used in construction. Conduct jobsite walks to ensure successful project completion. Conduct jobsite walks to identify and eliminate safety hazards.Benefits, • Group medical, vision and dental insurance including choice of two benefit plans – a PPO plan and a high deductible / Health Saving Account Plan with company contribution to HSA., • Company-paid Short- & Long-Term Disability plans, group Life Insurance, and AD&D plans, • Flexible Spending Account (FSA) plans (for health care and dependent care), • Untracked / Unmeasured vacation., • Sick Leave accrued at 1 hour of sick leave for every 30 hours worked with a carryover of 80 hours, • 9 paid Holidays each year, • Paid Parental Leave, • If you are in the union, please refer to your local collective bargaining agreement., • Annual Discretionary Bonus based on company profitability and your manager’s assessment of your performance., • A 401(k) savings plan under which our client matches the first three percent of your deferral with a 100% match and the next two percent with a 50% match for a total matching contribution of 4% of your pay. You are immediately 100% vested in all contributions. We provide both traditional (Pre-Tax) and Roth (post –tax) contribution options in our 401(k) plan., • We’re also proud to be an employee-owned company. This means you get an ownership stake through a benefit called an Employee Stock Ownership Plan (ESOP). It’s 100% company funded and is invested in company stock. You can participate in this long-term plan after you complete 1 year of service (with at least 1,000 hours)., • Company vehicle or vehicle allowance, toll pass and fuel card

Job DescriptionSummary The Senior Superintendent is responsible for managing all field operations on the project assigned in order to achieve timely and profitable completion of work. The Senior Superintendent directly supervises Superintendents, Foremen, and Laborers/Craft workers. This position must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and client service skills. Duties & Responsibilities • Direct on-site supervision of field labor force including Superintendents, Foremen, subcontractors, and other construction related personnel., • Assist Sr. Project Manager in the supervision and responsibility of the total construction effort in accordance with design, budget, quality, and schedule., • Assist with providing technical assistance (interpretation of drawings, recommendation of construction methods and equipment, etc.) as required, including mechanical, electrical, plumbing and fire protection., • Inspect contractor or subcontract operations to ensure compliance with contract., • Review and approve trade contractor payment applications with Project Manager., • Maintain good relationships with internal and external clients, including representatives of Owner, Architect/Engineer and partners., • Develop and maintain site logistics plan, in coordination with Sr. Project Manager., • Develop quality assurance & controls; conduct quality inspections., • Coordinate site testing and inspection efforts., • Monitor costs, including labor time and material., • Communicate and enforce safety and health management program., • Demonstrate commitment to an injury-free environment through own actions and mentoring others., • Manage schedules, including preparation of detailed short-term schedules and ensuring all activities take place on or ahead of scheduled dates., • Prepare and submit Superintendents daily reports to document weather and field conditions, trade and subcontractor manpower, progress and conditions impacting the project, as well as accident reports, quality reports, etc., • Conduct subcontractor meetings., • Attend and participate in project meetings., • Provide training and education to support field Superintendents and Engineers. Qualifications & Requirements • Degree in Construction Management, Business Administration, or a closely related field preferred., • OSHA Certification., • First Aid/CPR certification., • Minimum 8 years of industry experience., • Computer knowledge and efficiency, including Microsoft Office Suite., • Knowledge of project management software programs., • Broad understanding of industry., • Familiarity with requirements of drawings and specifications and with terms and conditions of project contracts, subcontracts, and purchase orders., • Strong written and verbal communication skills., • Good math/accounting skills., • Strong management skills., • Strong ability to read drawings and specifications., • Functions effectively as part of a team., • Exhibits strong leadership qualities., • Ability to maintain discretion and confidentiality., • Delegates work appropriately., • Strong decision making/problem solving skills., • Excellent time management and organizational skills., • Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Capable of traversing over construction-type terrain when under development; moving through the construction site and the materials in place for use on the site; climbing ladders and temporary stairways; conducting visual inspections of quality of construction and materials being used in construction. Conduct jobsite walks to ensure successful project completion. Conduct jobsite walks to identify and eliminate safety hazards. Benefits • Group medical, vision and dental insurance including choice of two benefit plans a PPO plan and a high deductible / Health Saving Account Plan with company contribution to HSA., • Company-paid Short- & Long-Term Disability plans, group Life Insurance, and AD&D plans, • Flexible Spending Account (FSA) plans (for health care and dependent care), • Untracked / Unmeasured vacation., • Sick Leave accrued at 1 hour of sick leave for every 30 hours worked with a carryover of 80 hours, • 9 paid Holidays each year, • Paid Parental Leave, • If you are in the union, please refer to your local collective bargaining agreement., • Annual Discretionary Bonus based on company profitability and your managers assessment of your performance., • A 401(k) savings plan under which our client matches the first three percent of your deferral with a 100% match and the next two percent with a 50% match for a total matching contribution of 4% of your pay. You are immediately 100% vested in all contributions. We provide both traditional (Pre-Tax) and Roth (post tax) contribution options in our 401(k) plan., • Were also proud to be an employee-owned company. This means you get an ownership stake through a benefit called an Employee Stock Ownership Plan (ESOP). Its 100% company funded and is invested in company stock. You can participate in this long-term plan after you complete 1 year of service (with at least 1,000 hours)., • Company vehicle or vehicle allowance, toll pass and fuel card Employment Type: Full time Location: Los Angeles, CA

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle, and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Shipping Clerk Department: Shipping Department/ Area: Quality Department Position Summary: Performs the packaging and shipping functions and all associated activities for shipments made to the Department of Defense. Daily tasks: Under the general supervision of the Production Control Manager plans, organizes and directs the daily activities of both the packaging and shipping of orders delivered to any of the Department of Defense locations. Performs all shipping and inventory transactions in accordance with MSA procedures and practices. Maintains accurate record of all shipments and produces daily shipping reports, and forecasts of future shipments. Ensures the department is clean, well-organized, and safe always. Minimum Qualifications: High School graduate or equivalent with experience in a shipping department with strong communication skills. Experience with the WAWF and DoD shipping preferred. The ability to learn quickly and work well under pressure and to meet rigid deadlines. Experience in a fast-paced packaging and shipping department. Strong organizational skills, good memory, and attention to detail. Above average computer skills and the ability to learn Visual Manufacturing software Reporting Relationships: Reports to Quality Director, Shipping Manger and Supervisor. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to use hands to finger to handle and feel. In addition, employee is required to talk or hear. The employee is required to stand (minimum 8 hours); walk; reach with hands and arms. The employee occasionally lifts and/or moves items up to 40 pounds. The employee must frequently perform repetitive activities using the bilateral upper and lower extremities. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Strong attention to detail and the ability to concentrate for long periods of time. Hearing level within normal/average range. Working Conditions: Second shift position. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee usually works indoors but occasionally required to work in outdoor spaces. The employee is occasionally exposed to wet and/or slippery conditions. Required to wear safety attire or protective gear on a daily basis. Regularly required to work around powered industrial trucks. The employee must have the ability to work in a fast-paced environment and meet deadlines. The noise level in the work environment is occasionally loud. Position Type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Position: QA Technician Location: Anaheim, CA Compensation: $25.00 - $27.00 DOE Shift: 7:00 AM - 3:30 PM Duties/Qualifications: • Responsible to work closely with QA Engineer to evaluate product specifications including reviewing, modifying and creating standard test procedures., • AS degree or Certificate in computer and/or electronic technology, • 1+ years experienced in the electronics industry (Professional Audio/Video experience a plus)., • Ability to read and understand schematics/drawings., • Knowledge of using oscilloscope, DMM and related test equipment., • Familiar with MS Word, Excel application and Win OS., • Excellent communication skills (written and verbal)., • Strong attention to detail, highly organized, computer literate., • Ability to work well in a fast-paced environment. About Kimco Staffing Services: With 30 years of award-winning service in California, Kimco offers flexible employment options including temporary, contract and direct hire through our specialized practices: office professionals, accounting operations, technical support, and industrial staffing. Last year we filled more than 22,000 jobs. PandoLogic. Keywords: Quality Control / Quality Assurance Technician, Location: Long Beach, CA - 90848 , PL: 603526432

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR DIGITAL PAYLOAD ENGINEER I/II PIPELINE Based onsite at Rocket Lab's global headquarters in Long Beach, CA, we are looking for a Senior Digital Payload Engineer I/II for a future opening who will be responsible for the development of new digital payload products including modems, processors, and network routers. The Senior Digital Payload Engineer will take the design from initial concept through inflight operations including board layout, bring-up, qualification, and production. The successful candidate will have a strong combination of RF engineering, system design, and board/circuit design skills and will thrive in a fast-paced, dynamic environment. WHAT YOU'LL GET TO DO: Product Development • Define and maintain requirements specifications, • Architect the digital product design, • Support the development process, ensuring key design decisions and developments are in alignment with the required product capabilities, • Design and prototype the digital product including component selection and PCB layout / fabrication / packaging, • Support the development of test plans and procedures, • Support the design and development of GSE and production automation, • Support the development of product documentation including ICDs and User Manuals, • Liaise with Test Engineers and Manufacturing Engineers to drive New Product Introduction Customer/Program Support • Review proposals and requirements specifications to assess compliance based on existing unit capabilities vs development needs, • Scope and drive development activities for new requirements, • Support engineering reviews such as PDRs, CDRs and TRRs, • Provide technical support to internal/external customers including general questions and anomaly troubleshooting, • Maintain broad awareness of product development and production schedules to ensure the needs of customers and programs are satisfied (Please note: this position can be hired at the Senior Digital Payload Engineer I or Senior Digital Payload Engineer II level) YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR DIGITAL PAYLOAD ENGINEER I: • Bachelor's degree in electrical engineering, computer science; or other engineering discipline, • 5+ years of experience in space electronics with technical expertise in high speed serial interfaces (SPI, PCIe, Ethernet), system on chips, microcontrollers, and digital signal processing, • Experience in developing and delivering a digital product including assessing requirements, prototyping engineering models, and producing space worthy products, • Detailed knowledge of digital signal processing (DSP) algorithms and communication theory, • U.S. citizenship required due to program requirements YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR DIGITAL PAYLOAD ENGINEER II: • Bachelors degree in electrical engineering, computer science; or other engineering discipline, • 8+ years of experience in space electronics with technical expertise in high speed serial interfaces (SPI, PCIe, Ethernet), system on chips, microcontrollers, and digital signal processing, • Experience in developing and delivering a digital product including assessing requirements, prototyping engineering models, and producing space worthy products., • Detailed knowledge of digital signal processing (DSP) algorithms and communication theory, • U.S. citizenship required due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Ability to obtain a TS/SCI clearance, • Deep experience in various modems and familiarity with latest modem components, • Extensive experience in space grade board design including parts selection and performance simulation for high-speed digital and mixed signal circuits, • Extensive experience in circuit analyses including timing analysis and physical constraints, • Extensive experience supporting and leading complex engineering programs and developing associated documentation; demonstrated code design for re-usability, maintainability, and scalability, • Experience designing, integrating, and testing communications systems for launch vehicles or satellites, • Experience leading incident management and investigations, • The ability to work under pressure and to tight deadlines, • Effective communication skills and the ability to build strong working relationships, • Project management experience ADDITIONAL REQUIREMENTS: • Sit at desk and operate computer, keyboard and office equipment for extended periods, • Use hands with dexterity to operate controls, tools and technical equipment, as needed, • Read technical documents, drawings, and computer screens requiring close and distance vision, • Move between buildings, labs, and work areas, as needed, • Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$130,000—$190,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. PRINCIPAL SPACECRAFT GUIDANCE NAVIGATION AND CONTROL (GNC) ENGINEER - SECRET CLEARANCE Based out of Rocket Lab's global headquarters in Long Beach, CA, the Principal Spacecraft GNC Engineer - Secret Clearance is responsible for leading GNC and ADCS development for Rocket Lab's growing fleet of diverse spacecraft. You will demonstrate a firm grasp of spacecraft GNC concepts and applications. You will work with all facets of the engineering life cycle: spacecraft concept and algorithm development, flight software implementation, subsystem requirements development, detailed GNC design, subsystem integration & test (I&T), and vehicle I&T. You will be responsible for planning and maintaining the development schedule to support the Space Systems Software organization in executing leading edge programs and products. You will work closely with related teams, including Systems, Avionics, Flight Software, Mission Operations, and Ground Software. You will also directly interact with customers to ensure mission success. WHAT YOU'LL GET TO DO: • Mentor a team responsible for GNC design, modeling, and analysis for a wide variety of spacecraft and space missions to include LEO, MEO, GEO, Lunar, Interplanetary, Reentry, and RPOD, • Design of flight software, algorithms, and simulation product, • Development of spacecraft autonomy tools for constellation management, • GNC component selection and GNC subsystem design, • Test process development and execution, • Define fault detection and response, • Hardware-in-the-loop and Monte Carlo simulation, • Integration of flight and simulation software with modern analysis, test, and operations tools, • Support internal and external design reviews, • Work with department leads and program managers to plan and maintain team schedule and milestones and report technical status, • Coordinate with teams in Denver, Colorado and New Zealand YOU'LL BRING THESE QUALIFICATIONS AS PRINCIPAL SPACECRAFT GNC ENGINEER : • B.S and 12+ years of industry experience in GNC/ADCS, • Active Secret clearance, with ability to obtain TS/SCI, • Prior experience directly interfacing with aerospace customers in the commercial or government sectors, • U.S citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • MS or PhD, • 2+ years of RPOD design and operations experience, • Active TS/SCI clearance, • Experience in Jira planning and workflow, • Prior experiencing mentoring a team of younger engineers, • Hands-on experience with IMU, reaction wheels, star trackers, gyroscopes, and other GNC hardware, • Experience developing blended attitude solutions from a variety of sensor data, • Demonstrated experience developing, implementing, and verifying flight software, • Demonstrated experience with spacecraft on-orbit operations and anomaly resolution, • Prior experience leading a team across a project lifecycle (not necessarily a spacecraft, not necessarily a whole GNC system), • Prior experience working multiple projects simultaneously and determining priorities for a team, • Experience with GNC-related Business Development or conceptual design work This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$170,000—$225,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role We are seeking a Senior ASIC Physical Design Engineer to help implement advanced SoCs that power next-generation satellite and space systems. In this role, you will contribute to the full physical design flow—from synthesis to GDSII—working closely with architecture, RTL, verification, and packaging teams. You'll be a key contributor in achieving timing closure, optimizing PPA, and supporting design integration with external partners. You will be part of a collaborative design team developing state-of-the-art mixed-signal SoCs to be hosted on some of the largest, most powerful, rapidly designed and rapidly manufactured satellites ever deployed in space. In your first 6 months, you will develop and implement new SoC sub-systems for satellite communications and beyond. In your first two years, you will have contributed to developing cutting-edge SoCs that will fly in space. Responsibilities • Execute the complete physical design flow for complex SoC blocks and top-level integration, including synthesis, floorplanning, place & route, CTS, STA, and physical verification., • Perform timing closure and optimization across multiple corners and modes using industry-standard tools., • Collaborate with front-end, verification, and DFT teams to ensure clean handoff and predictable convergence., • Work with external physical design service providers and internal leads to review deliverables, resolve issues, and ensure schedule alignment., • Develop and maintain scripts and automation to improve flow efficiency and consistency., • Support physical sign-off activities including DRC/LVS, IR drop, EM, and power analysis., • Assist in chip-level integration, ECOs, and tapeout preparation., • Contribute to methodology development, tool evaluation, and flow documentation., • Support your product through production and spaceflight. Required Qualifications • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related field., • 5–10 years of experience in ASIC physical design for complex SoCs., • Hands-on experience with industry-standard tools (Synopsys ICC2/Fusion Compiler, Cadence Innovus, or equivalent)., • Strong understanding of timing analysis, power optimization, and physical verification flows., • Experience with hierarchical or flat SoC design methodologies., • Familiarity with FinFET technologies., • Working knowledge of DFT, UPF/CPF power intent, and ECO implementation., • Strong problem-solving skills and ability to work cross-functionally in fast-paced environments. Preferred Qualifications • Exposure to radiation-hardened or space-qualified ASICs., • Experience with chip-package co-design or advanced packaging (2.5D/3D)., • Familiarity with physical design service vendor management or offshore collaboration., • Experience with sign-off through TSMC., • Experience with Gate-All-Around technologies., • Experience working in cross-functional, geographically distributed teams. Compensation and Benefits: • Base salary range for this role is $170,000 – $250,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $90,000 - $125,000 Job Summary The System Engineer is responsible for conducting architectural assessments, breakdown of the system into components, the component interactions and interfaces, and the technologies and resources to be used in the design. Leads the system design, development, testing, and implementation of all aspects of the RF Satellite Communications System development lifecycle, under the leadership of the given Program Manager. Outlines integrated solutions that meet performance, usability, reliability, and security needs. Develop technical documentation on applications and systems. Facilitates and leads in the evaluation and selection of commercial-off-the-shelf product evaluations. Additional responsibilities include analyzing engineered products to meet customer use-cases and assure compatibility of all physical, functional, and program interfaces to meet system requirements. Essential Job Duties and Responsibilities • Works as part of an Integrated Product Team (IPT) as Systems Engineer under the direction of the Director of Systems Engineering and with the given Program Manager., • Support the development of subsystem and system requirements by leading requirements IPT and working group meetings with the customer and subcontractors., • Identify and perform hands-on evaluation of system components, such as antennas, LNBs, amplifiers, HPAs, up-converters, down-converters, multiplexers, reference oscillators, PLLs, etc., • Review, develop, and document system-level operational concepts., • Provides effective and efficient system engineering support during the conceptual design, detailed design, integration, and test phases of a product development program and production delivery, supporting on-time completion of assigned tasks., • Performs requirement flow-down and traceability and evaluates the verification test results to satisfy requirements., • Drives continuous improvement initiatives in the areas of analysis, monitoring and performance management., • Sets systems and test requirements of new products and makes decisions relative to system architecture, components selection, and customer use-cases., • Works to support multiple programs/products simultaneously., • Prepares and presents design and analysis summary material during internal and external design reviews., • Documents system designs using ThinKom records retention procedures., • Follows Company design procedures and corporate policies., • Other duties as assigned. Skills and/or Experience Needed • BS, MS, or PhD in Physics, Engineering, or related technical field., • Technically proficient System Engineer with strong architecture skills, subject matter expertise in RF Communications Systems, and solid knowledge of all major components of RF Systems., • Minimum of 2 years of experience in systems engineering, with a track record of successfully architecting, developing, and validating complex RF Communications Systems., • Hands-on expertise with Vector Network Analyzers, oscilloscopes, spectrum analyzers, and other RF measurement equipment., • Technically proficient in MS Office products. Language Skills • Interpersonal skills to effectively work with ThinKom people internally as well as working effectively with suppliers and customers., • Ability to effectively present information in team meetings and design reviews, as needed. Other Abilities • Ability to communicate clearly in a well thought out manner, verbal and written., • Must have substantial problem-solving abilities. Additional Requirements • Must be eligible to obtain and hold a US DoD Security Clearance in support of US Government contracts/subcontracts. Physical Demands • Ability to travel up to 10% of the time., • This position uses a computer terminal to access, input, and retrieve data., • This position may be subject to interruptions that may cause a change in immediate priorities and/or work focus., • While performing duties to this position, employee is occasionally required to stand, walk, sit, stoop, reach, and/or bend., • May occasionally lift and/or move files or boxes up to 50 pounds., • May be subjected to occasional irregular or extended work hours., • May be required to sit for extended lengths of time., • Must be able to work in an environment that may be subjected to occasional loud noises, hazardous materials and chemicals. ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom Solutions is an Equal Employment Opportunity Employer. ThinKom Solutions is a Drug and Alcohol-free working environment with a zero-tolerance policy

Job DescriptionAbout D3: D3 is building the world's first purpose-built blockchain for DomainFi—bringing domain tokenization and DeFi primitives to a massive, rapidly growing $350B+ real-world asset class. We're revolutionizing how existing and future domain names are owned, traded, and leveraged in the digital economy. Our elite team is stacked with industry veterans who have spent the last three decades shaping the internet, from pioneering domain name monetization to architecting key internet protocols to launching and running major TLDs like .xyz, .inc, .tv, and .link. With a proven track record of innovation and success, we're now redefining what's possible in the domain space. We recently closed a $25M Series A led by Paradigm - one of the best investors in the industry. This will help fuel our mission to bring domains fully on-chain and unlock new financial possibilities for one of the internet's most valuable asset classes. We're based in Los Angeles, with team members all over the world. We're looking for driven, talented builders to help build a trillion-dollar DomainFi economy. Join us! Job Description We are seeking a highly skilled and experienced Senior Fullstack Engineer to join our team. In this role, you will design, develop, and optimize both frontend and backend components that power our user-facing applications, including decentralized applications (dApps), a Web2/Web3-compatible Registrar, and domain marketplaces. You will play a critical part in building scalable, secure, and user-friendly systems that bridge traditional DNS with blockchain-based naming technologies. Familiarity with token standards (ERC-721, ERC-1155, ERC-20), wallet integrations, event-driven architectures, and distributed systems is essential. ResponsibilitiesFrontend • Collaborate with the product team to translate requirements into technical specifications and user-facing features., • Develop and maintain frontend components of the domain registrar and marketplace using Next.js, Typescript, React, GraphQL, HTML, and CSS., • Design and implement dApps that seamlessly integrate Web2 and Web3 APIs., • Build pixel-perfect UI from wireframes and high-fidelity mocks with attention to detail., • Contribute to open-source SDKs enabling developers to integrate Doma Protocol into their apps., • Write and maintain unit, integration, and E2E tests., • Ensure accessibility (WCAG), SEO, web performance best practices, scalability, and security. Backend • Design, implement, and maintain backend services to support registrar features, domain tokenization, and Web2/Web3 marketplaces., • Build robust systems for payment processing, integrating fiat and crypto gateways., • Develop backend systems supporting event-driven architectures and asynchronous processing with Kafka, RabbitMQ, or similar tools., • Write scalable APIs, ensuring code quality through reviews, testing, and debugging., • Maintain and optimize existing services for performance and reliability., • Stay up to date with best practices and emerging technologies in web and blockchain development. Qualifications • Bachelor's degree in Computer Science, Software Engineering, or related field (advanced coursework and certifications are a plus)., • 5+ years frontend development (React, Vue, or Angular)., • 5+ years backend development (Node.js with MySQL/Postgres)., • Experience building highly scalable, distributed production systems., • CSS frameworks (Tailwind, Bootstrap) and responsive design., • Mobile-first design principles and optimization for small screens., • Web3 libraries (web3.js, ethers.js, wagmi)., • Event-driven architecture and asynchronous processing., • Experience with APIs, microservices, and distributed systems., • Basic understanding of blockchain architecture and smart contract interaction., • Strong problem-solving, adaptability, and self-motivation., • Familiarity with Git, Agile methodologies, and CI/CD practices., • Excellent communication and teamwork skills. Pluses • Smart contract development (Solidity)., • Experience with React Native or mobile development., • Familiarity with EPP (Extensible Provisioning Protocol) in domain systems., • Experience with NestJS, GraphQL., • DevOps experience (Kubernetes, AWS, GCP, DigitalOcean, Linux)., • Accessibility design knowledge. Why D3, Why Now? Ground-Floor Growth, Learning, and Impact: D3 is your chance to dive headfirst into an ultra-early-stage company where every move you make truly matters. You'll have the opportunity to sharpen your skills, expand your expertise, and shape the foundation of something groundbreaking. Almost everything we're building today at D3 is "zero-to-one," meaning you'll be among the first to craft, refine, and launch key initiatives that define our future success. Strong, Proven Leadership: At D3, you'll work alongside industry visionaries who have been there, done that, and are ready to do it again—only bigger. Our leadership team brings veteran industry experience, sharp insights, and a relentless drive to do big things across every function at D3. You'll gain invaluable mentorship, develop a high-impact mindset, and be challenged to grow in ways you never imagined. Unique Market Positioning – We're pioneering at the intersection of internet infrastructure, real-world assets, and blockchain communities, creating solutions that redefine what's possible in Web3. If you want to push boundaries, solve complex problems, and be part of a team that's shaping the future of the Internet, D3 is the place to do it.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: Relativity Space pioneered large-scale additive manufacturing with our Terran 1 rocket, the largest 3D-printed object to fly. Now a distinct business unit within Relativity, Horizon Manufacturing Technologies is advancing next-generation manufacturing for aerospace and beyond. The team operates at the frontier of manufacturing innovation, where creativity meets capability. This is an environment where cutting-edge R&D is put into production, industrializing advanced manufacturing capabilities to solve customer problems. As member of the Horizon's Robotics Team, you'll work alongside welders, data scientists, and material scientists, creating an end-to-end additive manufacturing platform that serves a wide variety of applications. From exploring new materials to unlocking faster print speeds, to designing complex, organic geometries that can't be built any other way, it's high-impact work that sets the foundation for the future of advanced manufacturing. About the Role: We are seeking a Robotics Kinematics Engineer to join the Robotics team at Horizon with broad technical skills and a good balance between theoretical and hands-on mindset to develop and own a crucial backbone for our software infrastructure related with kinematics and calibration. This role is ideal for a software engineer who thrives in cross-functional environments, enjoys owning full projects from design to deployment, and is comfortable navigating ambiguity in a fast-moving R&D setting. • Develop advanced kinematics algorithms for robotic systems (6+ DoF), including forward/inverse kinematics and redundancy resolution, optimized for real-time performance., • Own and maintain the kinematics library shared across multiple robotics software products., • Develop and maintain calibration tools and methodologies supporting a wide range of robot calibration workflows., • Serve as the Subject Matter Expert (SME) for robot kinematics, motion modeling, and multi-axis synchronization. About You: • BS required; MS preferred in Robotics Engineering, Control Systems Engineering, Computer Science, or a related technical field., • 5+ years of experience developing kinematics algorithms for both underactuated and redundant robotic systems., • Strong expertise in robot kinematic modeling and calibration methodologies using industrial metrology and localization hardware (Leica, OptiTrack, etc), • High proficiency in C++, Linux, and modern software engineering practices; comfortable developing in Python., • Experience designing modular, extensible software architectures that support diverse robot kinematics and configurations. • Experience with ROS and open-source robotics libraries. Nice to haves but not required: • Experience with multi-robot coordination and synchronization., • Experience with mobile manipulators., • Experience developing software for real-time robotic systems., • PhD in Robotics, Control Systems, or a related technical field. At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$146,000—$218,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job DescriptionOur client is consistently recognized as a best workplace, and for our commitment to safety, sustainability, and community partnerships. They hire the very best in the construction industry and strives to create an environment that encourages innovation, responsibility, and client satisfaction. Job Summary The Project Engineer is responsible for reading and understanding the construction design documents and specifications, ability to perform construction cost estimates and quantity surveys for various scopes of work, overall trade management and coordination, and some level of exposure to BIM. Benefits Group medical, vision, and dental insurance, including a choice of two benefit plans - a PPO plan and a High Deductible/ Health Savings Account plan with company contribution to HSA.Company-paid short and long-term disability plans, group life insurance, and AD&D plans.Untracked/unmeasured vacation.Sick leave accrued at 1 hour of sick leave for every 30 hours worked with an annual carryover of 80 hours.9 paid holidays each year.Paid parental leave.Annual discretionary bonus based on company profitability and your manager's assessment of your performance.A 401(k) savings plan under which our client matches the first 3 percent of your deferral with a 100% match and the next two percent with a 50% match for a total matching contribution of 4% of your pay. You are immediately 100% vested in all contributions. They provide both traditional (pre-tax) and Roth (post-tax) contribution options. They are proud to be an employee-owned company. This means you get an ownership stake in the company through a benefit called an Employee Stock Ownership Plan (ESOP). It's 100% company-funded and is invested in company stock. You can participate in this long-term plan after you complete 1 year of service (with at least 1,000 hours). Job Responsibilites Coordinate with project architects, designers, owners, and field personnel.Responsible for generating Request for Information (RFI) and submittals.Manage project subcontractors.Act as the information hub to ensure continuity of work.Offer technical information to project supervisor to ensure work complies with applicable codes, drawings, and specifications.May coordinate change orders, expedite material and job site equipment, assist in preparation of estimates, and compile data to assist in analyzing project progress.Monitor and track project quality control metrics and activities on a regular basis; provide timely and accurate quality reports, and raise issues to Project Manager or Superintendent, as appropriate.Inspect all work to ensure compliance with plans and specifications. Qualifications Graduate or pending graduate of a four-year degree program in Engineering or Construction Management.Full knowledge of computer software, i.e. Microsoft Office Suite.Working knowledge of Autocad or Revit a plus.Broad knowledge of LEAN and BIM techniques.Experience with BIM is a plus.Demonstrated analytical and problem-solving skills.Good oral and written communication skills. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is frequently required to sit, communicate, reach and manipulate objects, tools or controls. The position requires mobility. Duties involve moving materials weighing up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Our client believes in collaboration, team building, and a strong supervisor/employee relationship. To accomplish this, the duties of this role are not performed in a remote capacity, and we expect that all employees will complete work in an office/job site setting. This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.Employment Type: Full time Location: Los Angeles, CA

Job Description About CENIC: Join the team that connects California to the world — advancing education and research statewide by providing the world-class computing network essential for innovation, collaboration, and economic growth. Our organization operates the California Research and Education Network (CalREN), a high-capacity computer network with more than 8,000 miles of optical fiber. The network serves over 20 million users across California, including the vast majority of K-20 students, together with educators, researchers, and individuals at other vital public-serving institutions. We are looking for Network Engineers at various levels: mid-career > senior > technical expert > and leadership roles! Please see our career center for other positions available. POSITION SUMMARY: The Principal Engineer, Network plays a strategic leadership role in designing, implementing, and evolving CENIC’s multiple networks, including CalREN, Pacific Wave, and the Western Regional Network. This position supports the organization through senior-level technical expertise, complex problem-solving, long-term planning, and mentorship. The Principal Engineer, Network works across teams and with external partners to ensure the ongoing reliability, performance, and scalability of CENIC’s backbone and member-facing infrastructure. SUPERVISORY RESPONSIBILITY: None LOCATION: Hybrid. La Mirada, CA ESSENTIAL FUNCTIONS: Network Planning and Design Lead the design and evolution of optical and Layer 2/3 backbone and access networks to support growing bandwidth, service, and resilience needs Create, publish, and maintain comprehensive written strategic and tactical goals and project plans for CENIC networks Evaluate and plan for the adoption of emerging network services, technologies, and protocols Set engineering direction through the authorship and enforcement of architectural standards, design templates, and configuration policies Conduct traffic and capacity analyses to inform long-term infrastructure decisions Keep up-to-date with emerging trends and technologies in the networking industry and the larger research & education community Occasional travel to conferences to advocate for and connect with the community Technical Leadership Serve as a senior technical authority and architectural decision-maker for CENIC’s backbone and member-serving networks and services Translate organizational strategy into technical roadmaps that align with long-term infrastructure and service goals Lead the evaluation and adoption of emerging technologies to ensure network resiliency, scalability, and relevance Represent CENIC in high-level external engagements, technical alliances, and initiatives within the wider research & education community Proactively identify systemic challenges or risks and drive coordinated solutions across departments Partner with the NOC, Security, and Program Management teams on design, deployment, and troubleshooting efforts Mentorship and Internal Support Serve as a technical resource and mentor for engineers across the team Assist with technical reviews, training, and knowledge sharing Automation and Tooling Identify and implement opportunities for automation of provisioning, monitoring, and configuration workflows Contribute to the selection and improvement of network visibility and performance tools REQUIRED EDUCATION AND/OR EXPERIENCE: Bachelor’s degree in Computer Science, Electrical Engineering, or related field with at least 10 years of advanced network engineering experience (ISP, research & education, enterprise-scale backbones) Deep mastery of IP (BGP, OSPF, IS-IS), MPLS (Segment Routing), VPN services (L2VPN, IPVPN), and traffic engineering concepts Proven track record designing and operating large-scale IP and optical networks (100G+) Familiarity with the configuration, operation, and evaluation of major vendors, such as Cisco, Juniper, Arista, and Nokia Demonstrated ability to guide others: mentor engineers, lead peer reviews, and drive adoption of best practices Strong communication skills for engaging collaborators, senior leadership, and external stakeholders Background in research & education, public sector, or nonprofit backbone networks Experience in capital planning, vendor selection, or managing high-impact network rollouts Preferred SKILLS AND EXPERIENCE Bachelor's degree in Computer Science or related discipline with 12 years or more of experience, or a combination of education and experience. Experience with DWDM networks, such as Cisco NCS2006 and/or NCS1010 platforms Understanding of network automation concepts for configuration, monitoring, and testing, and familiarity with tools such as Python, NSO, and Netbox Experience designing and implementing IP peering connectivity with other cloud, content, and service providers WORK ENVIRONMENT: This position operates in a professional office environment with standard office equipment, including computers, telephones, photocopiers, and filing cabinets. WORK HOURS: The regular workweek is Monday through Friday, 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required based on CENIC’s business demands. WORK AUTHORIZATION: Documented Proof of identity and legal eligibility to work in the United States. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. CENIC does not offer STEM OPT training opportunities and cannot complete Form I-983. WHY WORK AT CENIC? Company Culture: Small teams and a collaborative environment provide the opportunity to make a large impact in a small organization. Community Engagement: We work with research and education institutions in the largest state economy in the United States. Your work has meaning. Generous Health Benefit Package: We value our employees' wellness. We offer a variety of medical, dental, and vision benefits.. We have you covered with life, short-term, and long-term insurance. We also offer pet insurance at a discount. Paid Time Off: We offer liberal vacation, sick leave, and 15 paid holidays. Investment in Your Future: CENIC contributes to your 403(b) even if you don't. We also offer matching contributions. Pre-tax and Roth options are also available. Direct applicants only. No recruiters. CENIC is an equal opportunity employer – Vets/disabled

Job Description About CENIC: Join the team that connects California to the world — advancing education and research statewide by providing the world-class computing network essential for innovation, collaboration, and economic growth. Our organization operates the California Research and Education Network (CalREN), a high-capacity computer network with more than 8,000 miles of optical fiber. The network serves over 20 million users across California, including the vast majority of K-20 students, together with educators, researchers, and individuals at other vital public-serving institutions. We are looking for Network Engineers at various levels: mid-career > senior > technical expert > and leadership roles! Please see our career center for other positions available. POSITION SUMMARY: The Senior Network Engineer plays a strategic leadership role in designing, implementing, and evolving CENIC’s multiple networks, including CalREN, Pacific Wave, and the Western Regional Network under the guidance of the Principal Engineer, Network. This position supports the organization through high-level technical expertise, problem-solving, long-term planning, and mentorship. The Senior Network Engineer works across teams and with external partners to ensure the ongoing reliability, performance, and scalability of CENIC’s backbone and member-facing infrastructure. SUPERVISORY RESPONSIBILITY: None LOCATION: Hybrid ESSENTIAL FUNCTIONS: Network Planning and Design Under the guidance of the Principal Engineer, Network, lead the design and evolution of optical and Layer 2/3 backbone and access networks to support growing bandwidth, service, and resilience needs Create, publish, and maintain comprehensive written strategic and tactical goals and project plans for CENIC networks Set engineering direction through the authorship and enforcement of architectural standards, design templates, and configuration policies Conduct traffic and capacity analysis to inform long-term infrastructure decisions Keep up-to-date with emerging trends and technologies in the networking industry and the larger research & education community Occasional travel to conferences to advocate for and connect with the community Technical Leadership Serve as a technical authority and architectural decision-maker for CENIC’s backbone and member-serving networks and services Translate organizational strategy into technical roadmaps that align with long-term infrastructure and service goals Represent CENIC in high-level external engagements, technical alliances, and initiatives within the wider research & education community Proactively identify systemic challenges or risks and drive coordinated solutions across departments Partner with the NOC, Security, and Program Management teams on design, deployment, and troubleshooting efforts Mentorship and Internal Support Serve as a technical resource and mentor for engineers across the team Assist with technical reviews, training, and knowledge sharing Automation and Tooling Identify and implement opportunities for automation of provisioning, monitoring, and configuration workflows Contribute to the selection and improvement of network visibility and performance tools REQUIRED EDUCATION AND/OR EXPERIENCE: Bachelor's degree in Computer Science or related discipline with 10+ years of experience, or a combination of education and experience. Mastery of IP (BGP, OSPF, IS-IS), MPLS (Segment Routing), VPN services (L2VPN, IPVPN), and traffic engineering concepts Familiarity with the configuration, operation, and evaluation of major vendors, such as Cisco, Juniper, Arista, and Nokia Demonstrated ability to guide others: mentor engineers, lead peer reviews, and drive adoption of best practices Strong communication skills for engaging collaborators, senior leadership, and external stakeholders Preferred SKILLS AND EXPERIENCE Experience with DWDM networks, such as Cisco NCS2006 and/or NCS1010 platforms Understanding of network automation concepts for configuration, monitoring, and testing, and familiarity with tools such as Python, NSO, and Netbox Experience designing and implementing IP peering connectivity with other cloud, content, and service providers WORK ENVIRONMENT: This position operates in a professional office environment with standard office equipment, including computers, telephones, photocopiers, and filing cabinets. WORK HOURS: The regular workweek is Monday through Friday, 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required based on CENIC’s business demands. WORK AUTHORIZATION: Documented Proof of identity and legal eligibility to work in the United States. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. CENIC does not offer STEM OPT training opportunities and cannot complete Form I-983. WHY WORK AT CENIC? Company Culture: Small teams and a collaborative environment provide the opportunity to make a large impact in a small organization. Community Engagement: We work with research and education institutions in the largest state economy in the United States. Your work has meaning. Generous Health Benefit Package: We value our employees' wellness. We offer a variety of medical, dental, and vision benefits.. We have you covered with life, short-term, and long-term insurance. We also offer pet insurance at a discount. Paid Time Off: We offer liberal vacation, sick leave, and 15 paid holidays. Investment in Your Future: CENIC contributes to your 403(b) even if you don't. We also offer matching contributions. Pre-tax and Roth options are also available. Direct applicants only. No recruiters. CENIC is an equal opportunity employer – Vets/disabled

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. The team leverages close partnership between avionics design, manufacturing, and test to enable rapid iteration and feedback loops. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation. Now is a unique time to join: you'll get to help shape Terran R's fundamental avionics architecture and be given a high degree of ownership on components that will fly. About the Role: As a digital hardware engineer on the Avionics team, you will design, test, and analyze custom high-speed electronics on the Terran R launch vehicle. You will oversee hardware development through the entire product lifecycle from concept to flight maturity to include initial design, board bring-up, design verification, qualification, initial flight production, integration, and vehicle operations. You will work with cross-functional partner teams across the company to help the team make the best possible decisions for the overall vehicle. A strong candidate for the role will have a deep technical background in electronics design and sound project management skills to ensure the hardware project is both reliable and on-schedule to support Terran R's launch! About You: • Bachelors degree in Electrical Engineering, Computer Engineering, or a related field, • 5+ years of experience in electronics designed for harsh environments and mission-critical applications such as launch vehicles, spacecraft, aircraft, or robotics, • Technical expertise in high speed serial interfaces (SPI, PCIe, Ethernet, etc.); memory interfaces; design for SoCs, microcontrollers, and microprocessors, • Experience with eCAD software such as Altium or equivalent, • Experience with hardware bring-up, validation, debugging, and data analysis, • Experience with board-level design from concept to manufacturing, • Experience working with highly cross-functional teams (mechanical, thermal, electrical, software, etc.) to develop integrated electronics solutions Nice to haves but not required: • Familiarity with embedded software development and integration for avionics systems, • Experience with design for reliability and manufacturability of avionics hardware and systems At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$148,000—$222,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job DescriptionDescription: Position Overview Our seeker and terminal guidance products are moving from demonstrated capability to fielded systems across long-range strike, loitering and guided munitions, counter-UAS, air-launched effects, and rockets and mortars. We need a senior engineer to own the estimation and guidance core of that stack: the tracker, the filters, the fusion, the guidance law, and the navigation solution that keeps working when GPS does not. What You'll Do Target Tracking, Estimation & Fusion • Design and implement multi-target tracking pipelines for static and moving targets: initiation, gating, data association, track maintenance, and re-acquisition after occlusion or dropout, • Develop nonlinear estimators (EKF, UKF, IMM) for target state, relative geometry, and passive ranging solutions, • Integrate multi-modal sensor fusion across EO, IR, and inertial sources; RF where the platform provides it, • Own lock-on-after-launch (LOAL) logic: acquisition, track confirmation, and handoff into terminal guidance Terminal Guidance & Seeker Algorithms • Build image-based ATD/ATR chains feeding closed-loop guidance: detection, classification, orientation and rate estimation, and vulnerability aimpoint selection, • Develop and evaluate terminal guidance laws (proportional navigation and variants) against miss distance, seeker field-of-view, and control authority constraints, • Harden endgame performance in real-world conditions: clutter, low contrast, obscuration, and high closing rates GPS-Denied Navigation • Create visual-inertial navigation delivering drift-free, absolute positional awareness through midcourse and terminal phases without GPS or laser designators, • Characterize, align, and calibrate INS/IMU systems on low-cost, SWaP-C-constrained inertial hardware, • Implement georegistration, photogrammetry, and map-matching approaches that bound inertial drift; integrate with flight stacks (PX4, ArduPilot) Real-Time Software • Write modern, object-oriented C++ implementations of all algorithms, running inside containerized guidance modules on embedded targets (NVIDIA, Qualcomm Snapdragon, FPGA) under hard SWaP-C and timing constraints, • Prototype in Python or MATLAB, then carry it to flight-quality code yourself—there's no throwing it over the wall to a software team here Simulation, Test & Analysis • Exercise algorithms in physics-based, photorealistic simulation environments (Unreal, Unity, CSG, AFSIM, FLITES, MODTRAN, DIRSIG), • Run Monte Carlo and hardware-in-the-loop campaigns to validate performance, • Support captive-carry and live flight test; own the anomaly investigation when telemetry disagrees with the model Technical Leadership • Set the algorithm architecture and mentor engineers implementing alongside you, • Engage directly with customers and partners: technical interchanges, live demos, proposals, and SBIR/STTR white papers, • At our size, the engineer who built it is the engineer who presents itRequirements:, • BS in Electrical Engineering, Aerospace Engineering, Computer Science, Physics, Applied Mathematics, or related field., • 8+ years developing estimation, tracking, GNC, or seeker algorithms for aerospace or defense systems, • Proven expertise in nonlinear estimation (EKF, UKF, IMM or equivalent), • Production experience with multi-target tracking, data association, and track management algorithms, • Proficiency in real-time C++ for embedded systems, • Experience with sensor fusion across multiple modalities (EO, IR, inertial, RF), • Demonstrated capability shipping algorithm code to hardware under SWaP-C constraintsPreferred, • Advanced degree (MS or PhD) in relevant technical discipline, • 10+ years in aerospace or defense guidance/navigation/control, • Direct experience with terminal guidance law development and closed-loop control, • Hands-on work with image-based detection, tracking, or target recognition (ATD/ATR chains), • GPS-denied or visual-inertial navigation system design and implementation, • INS/IMU characterization, error modeling, and calibration on tactical-grade hardware, • Flight test participation (captive-carry and live fire), • Proficiency in simulation tools (Unreal, Unity, AFSIM, MODTRAN, DIRSIG, or equivalent), • MATLAB/Simulink prototyping transitioning to production code, • Customer-facing technical presentation and proposal experience, • Familiarity with containerized deployment (Docker) and flight stacks (PX4, ArduPilot), • Background in proportional navigation or advanced guidance architectures, • Experience with hardware-in-the-loop and Monte Carlo validation campaigns Compensation and Benefits • Salary range: The range for this position is $240K–$290K. New hires are typically brought into the organization at a salary between the range minimum and the salary range midpoint depending on qualifications, internal equity, and the budget allocated for this role., • Medical, dental, and vision coverage fully paid by the employer for employees, • Three weeks of vacation to start, • Automatic company contribution to 401K – 5% of earned wages (no matching required), • Educational assistance and professional development opportunities, • In-office (Jacksonville, AK or Los Angeles, CA ) or remote work (United States) available (position dependent) We provide reasonable accommodations for qualified individuals with disabilities in the application and hiring process. The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. This employer participates in E-Verify.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose We are seeking a talented and motivated Software Developer to join our Robotics & AI Software team. In this role, you will have the opportunity to work closely with experienced automation and software engineers to develop and implement innovative algorithms for task and motion planning plus computer vision in robotic systems. As a key member of our team, you will contribute to the design, development, and testing of software solutions aimed at enhancing the efficiency and reliability of robotic software algorithms. This involves symbolic task planning, robot kinematics, collision detection, optimization, and computer vision. The Role • Develop and maintain software development best practices to ensure high-quality code, efficient testing, and timely releases., • Collaborate with other teams to ensure that our software integrates seamlessly with other software products., • Collaborate with senior engineers to understand project requirements and contribute to the development of software solutions for robot task and motion planning., • Design, implement, and optimize algorithms within our planning framework, leveraging your programming skills and understanding of robotics principles., • Assist in the integration and testing of computer vision software to ensure robustness and performance in real-world scenarios., • Document your work, including code, algorithms, user manuals, and procedures, to support knowledge sharing and future development efforts., • Stay updated on advancements in robot planning algorithms and technologies, and contribute fresh ideas and insights to the team.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's in Computer Science, Robotics, or related field with 5+ years of professional experience., • Proficient in programming languages such as C++ and Python., • Strong knowledge of data-structures, algorithms, and design pattern., • Fundamental understanding of industrial robotics including manipulator kinematics & dynamics, robot trajectory generation, and communications protocols., • Expertise with search algorithms, optimization methods, and constraint satisfaction., • Experience with open source robotic planning and manipulation software packages such as MoveIt and ROS., • Knowledge of unit-testing, CI/CD pipelines, and containerization (Docker, Kubernetes)., • Excellent communication and collaboration skills., • Ability to work effectively with cross-functional teams, including product managers & owners, engineers, and internal customersPreferred Qualifications, • Master's or Ph.D. in Computer Science, Robotics, or related field with 3+ years of professional experience., • Understanding of computer vision libraries such as OpenCV and PCL., • Experience using programming languages such as C#, TypeScript., • Explored using Generative AI in robotics., • Strong publication record and/or open source contributions in the field of robotics. Environment • Hybrid Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E05 - E06 as evaluated through our interview process. E05 / Senior: $141,380 -$194.390 E06 / Staff: $163,270 - $224,500 Pay Range$141,380—$224,500 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Verification Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge phased arrays for satellites, spacecraft, and aerospace systems, we would like to hear from you.JOB DUTIES AND RESPONSIBILITIES • Contribute to the evaluation and technical implementation of FPGA and digital design simulation, verification and emulation infrastructure., • Contribute to the development, maintenance and phased deployment of continuous integration and regression testing infrastructure., • Develop state-of-the-art UVMf-based top-level and module-level testbenches using block-to-top best practices for reusability, including both control and data plane stimulation using VIP & System Verilog DPI-C integration with existing MATLAB and Python numerical models., • Lead the development of reusable custom VIP modules., • Work closely with the engineering and senior leadership teams to train and mentor engineers at all experience levels on UVMf testbench usage and modern approaches to FPGA/digital design. Work with the modeling and scientific staff to implement DPI-C dataplane verification interfaces into existing MATLAB and Python models., • Aid the Lead Verification Engineer in evaluating current processes regarding FPGA and digital design with a focus on Xilinx TLM models and QEMU-RP integration., • Work closely with vendors to define requirements of future simulation model deliverables., • Maintain up-to-date knowledge of industry best-practices regarding FPGA and digital design methodologies., • Work closely with the engineering leadership team to evaluate and non-disruptively implement process improvements.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • Minimum of 2 years of industry experience in verification and automation., • Knowledge of FPGA digital design verification techniques including VHDL, Verilog, SystemVerilog, C/C++, SystemC, UVM/UVMf, DPI-C, TLM, Formal CDC and functional analysis, QEMU and VIP., • Understanding of digital design automation infrastructure, including CI, regression testing and HIL testing., • Competency with Linux., • Knowledge of vendor-provided FPGA development tools with a focus on Xilinx tools.CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Position Overview OKSI is seeking a Sales/Solutions Engineer to bridge our engineering and Business Development teams. In this role, you'll bring deep technical fluency in OKSI's cutting-edge sensor technologies — including OKSI's passive EO/IR seeker and terminal guidance systems for precision-guided munitions and counter-UAS applications — directly into the sales process, translating customer requirements into winning technical solutions for the defense and government markets. What You Will Do Technical Sales & Demonstrations • Serve as the primary technical resource for the Business Development team, translating OKSI's sensor and autonomous platform technologies into clear, customer-facing value propositions, • Design and deliver live product demonstrations, proofs of concept, and technical presentations for prospects and customers at OKSI, customer sites, and industry events Proposal & Business Development Support • Write and contribute to technical volumes of proposals, capability statements, and white papers, • Partner with Business Development Directors and customers to understand mission requirements and translate them into deliverable technical solutions Cross-Functional & Market Engagement • Collaborate with engineering and program teams to relay customer feedback, assess technical feasibility, and scope new opportunities, • Evaluate competitor products and emerging technologies to help position OKSI's solutions effectivelyRequirements:, • Bachelor's degree in Electrical Engineering, Optical Engineering, Physics, Computer Science, or related field, • 3+ years of experience combining a technical/engineering background with customer-facing, sales engineering, or applications engineering experience, • Strong technical understanding of EO/IR sensor systems, autonomous platforms, and/or AI/ML-enabled sensing technologies, • Proven ability to translate complex technical concepts for both technical and non-technical audiences, • Exceptional written and verbal communication skills, with experience authoring technical proposal content, • Working knowledge of Department of Defense (DoD) requirements, acquisition processes, and government contracting, • Ability to obtain Department of Defense Secret clearance, • U.S. person status (export control requirement), • Willingness and ability to travel as needed to customer sites, trade shows, and industry events Preferred Qualifications • Direct experience with EO/IR sensors, hyperspectral imaging, or AI/ML applied to sensor data, • Strong understanding of DoD innovation pathways (e.g., SBIR/STTR, OTAs, Tech Transition), • Experience supporting proposal capture activities for government or defense programs, • ITAR/export-controlled environment experience Logistics & Travel • May travel up to 50% to tradeshows, demos, and industry events, • May work evenings, nights, weekends, and holidays as business needs dictate Compensation & Benefits • $100,000 - $135,000 annually. New hires are typically brought into the organization at a salary between the range minimum and the salary range midpoint depending on qualifications, internal equity, and the budget allocated for this role., • Medical, dental, vision fully paid by the employer for the employee, • Three weeks vacation, • Automatic company contribution to 401K – 5% of earned wages (no matching required), • Educational assistance, • Bonuses are tied to landed contracts We are an equal employment opportunity and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by law. We provide reasonable accommodations for qualified individuals with disabilities in the application and hiring process. The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a "U.S. person" as defined by 22 C.F.R. This employer participates in E-Verify.

Job Description Overview Information System Security Engineer LOCATION: El Segundo, CA JOB STATUS: Full-time CLEARANCE: Active TS/SCI TRAVEL: As Needed SALARY RANGE: Estimated $130,000+ USD Annually* *depending on experience, certifications, and qualifications Astrion is seeking a Information System Security Engineer to support our customer in El Segundo, CA. The Cybersecurity Analyst provides direct Assessment & Authorization support to the Space Systems Command, Space Domain Awareness and Combat Power, Innovation and Prototyping Delta. The Innovation and Prototyping Delta provides next-generation rapid, innovative & affordable technology that leverages international, commercial, & interagency partnerships. This position requires a DoD Top Secret Clearance to start. REQUIRED QUALIFICATIONS/SKILLS • Minimum 5+ years in Information Assurance functions including but not limit to the DoD Certification & Accreditation process, the RMF process, the Enterprise Information Technology Data Repository (EITDR), EMASS, monitoring and maintaining the Vulnerability Management System, CMI activities., • Top Secret clearance and SCI Eligible., • Experience with 8570 compliance., • Bachelor’s degree in business, Information Security, Information Systems, Computer Science, Engineering, or related field., • CompTIA Security+ will work providing if having Certification & Accreditation (C&A) or Assessment & Authorization (A&A) experience under Risk Management Framework (RMF)., • Familiarity with Risk Management Framework protocols., • Advanced-level competency with Microsoft Word, Excel, PowerPoint, and Outlook. PREFERRED QUALIFICATIONS/SKILLS • Certified Information Systems Security Professional (CISSP, or equivalent), • Familiarity with Space System Command (SSC) Certification and Authorization (C&A) procedures and US Space Force SAP networks., • Excellent and detail-oriented organizational, interpersonal, and communications skills. RESPONSIBILITIES • Develops, updates, accomplishes Enterprise Mission Assurance Support Service (eMASS) entries and updates, coordinates and staffs Certification and Authorization (C&A) packages for mission systems in accordance with DoDI 8510.01 Risk Management Framework (RMF), NIST 800-series, and any other RMF relevant documentation., • Administers mission systems information assurance telecoms and eMASS database updates, • Registers mission systems within the Air Force Information Technology Investment Portfolio Suite (ITIPS) in compliance with the Federal Information Security Management Act (FISMA), • Reviews mission systems certification policies, programs, procedures and reports for initial and follow-on system releases, including new and evolving cyber system requirements and documents findings with suggested changes, • Conducts and documents Security Test and Evaluation (ST&E) on mission systems., • Revalidates information assurance and cyber controls for accredited mission systems and documents findings with suggested changes., • Assesses as required, higher headquarters directed changes in the C&A policy requirements for their impact on mission system security posture or Risk Management Framework (RMF) authorized systems.

Job Description AnySignal is building the future of performant, resilient and adaptive connectivity for the space economy. As a Power Electronics Engineer on the hardware team, you will be responsible for owning the design, manufacture, and test of power circuitry for highly integrated PCBAs used by a large number of space customers. You will work with a small team of software, RF hardware, and FPGA engineers to shepherd the product from initial design to vehicle integration, taking a full-stack approach to building robust space communication systems. Responsibilities Design, analyze and test DC-DC power converters for space Work on electrical power system and sub-system level design trades and develop requirements Define and perform electrical power system verification testing and analysis Work with multidisciplinary teams of hardware, software and production engineers to create new power electronics hardware Basic Qualifications Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline 3+ years of professional experience designing power circuitry Proven experience doing schematic capture and layout in Altium Designer or similar Experience in modeling, simulation, and testing of power electronics Experience designing and debugging power converters Preferred Experience & Skills Master’s degree in electrical engineering or related field Familiar with failure mode effects and criticality analysis (FMEA) Experience designing power trees with complex sequencing requirements Experience with hand-on impedance measurement and loop-gain measurement Working experience in voltage and current mode control and compensation design Strong grasp of DC-DC topologies, with ability to select optimal architectures and components Familiarity with a wide range of topologies such as push-pull, buck, boost, buck-boost, forward, half-bridge, full-bridge, LLC resonant and phase-shifted full-bridge converters Familiarity with spacecraft electrical power systems In order to comply with the space technology export rules of the U.S. Government, such as the International Traffic in Arms Regulations (ITAR), it is necessary to be a U.S. citizen, a lawful U.S. permanent resident, a protected individual as specified by 8 U.S.C. 1324b(a)(3), or possess eligibility to secure the necessary authorizations from the U.S. Department of State. For additional information on ITAR, please seek further details. AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: careers@anysignal.com. We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations.

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: Epirus is seeking an experienced Senior ERP Solutions Engineer, Finance to support and enhance our ERP finance capabilities across Procure-to-Pay, Order-to-Cash, Record-to-Report, Project Accounting, Costing, and related business processes. This role will partner closely with Finance, Accounting, Supply Chain, Manufacturing, Contracts, and Enterprise Solutions to translate business needs into scalable solutions. The ideal candidate will bring strong functional understanding of operational business processes, hands-on ERP systems experience, and the technical ability to design reports and build automations using SaaS-based enterprise tools. The ideal candidate will have demonstrable experience in a fast-paced, agile business environment working cross-functionally with finance and accounting teams throughout the business to understand requirements and design solutions. Responsibilities: • Partner with business teams to identify and align needs, design, and validate technical solutions, deliver efficiencies and insights across all areas of finance and accounting, including P2P and O2C processes in ERP., • Support and enhance ERP-enabled operational processes, procurement, receiving, inventory, costing touchpoints, and project-driven supply chain., • Understand end-to-end ERP transaction flows and upstream/downstream impacts across operations, finance, manufacturing, supply chain, and external systems., • Identify process gaps, system limitations, recurring issues, and data quality challenges; recommend practical solutions that improve efficiency, accuracy, scalability, and user experience., • Champion ERP capabilities and align teams on best practices, driving innovation and operational excellence., • Prioritize and manage competing projects to deliver impactful tools and process enhancements that accelerate efficiencies across the business., • Lower barriers to learning and facilitate system adoption by documenting key features and offering user training to ensure effective use of systems., • Leverage SaaS-based tools and reporting platforms, including Oracle BI Publisher, Oracle BICC, and Palantir, to extract, transform, validate, and deliver ERP data for reporting, analytics, integrations, and operational decision-making., • Build relationships with customers, lead meetings to gather requirements, provide status updates, test, and obtain sign-off on deliverables., • Master critical business processes and related KPIs to ensure delivery of effective solutions.Basic Qualifications:, • 8+ years of experience as a Business Systems Analyst, ERP Functional Analyst, ERP Support Analyst, Finance Systems Analyst, or similar role supporting ERP finance processes., • Bachelor's degree in information systems, Finance, Accounting, Business, Computer Science, or equivalent practical experience., • Hands-on experience supporting a Tier 1 ERP system such as Oracle Fusion Cloud ERP, Oracle EBS, SAP, Microsoft Dynamics, Infor, or equivalent enterprise platform., • Working knowledge of finance and accounting processes such as Procure-to-Pay, Order-to-Cash, Record-to-Report, Project Accounting, Costing, Fixed Assets, Intercompany, or close processes., • Experience gathering requirements, documenting business processes, creating functional specifications, supporting UAT, troubleshooting production issues, and delivering system enhancements., • Experience supporting reports, data extracts, dashboards, or analytics using tools such as OTBI, BI Publisher, SQL, Smart View, or similar reporting tools., • Strong communication skills with the ability to work directly with Finance, Accounting, IT, Supply Chain, Manufacturing, and other business stakeholders.Preferred Skills & Experience:, • Hands-on experience with Oracle Fusion Cloud modules such as GL, AP, AR, FA, Cash Management, Procurement, Costing, Project Costing, Project Billing, Project Contracts, or Inventory., • Experience with ERP in an MES-enabled manufacturing environment, preferably servicing government/DOD as well as commercial contracts., • Experience with Oracle Cloud tools such as OIC, FBDI, ADFdi, BPM approvals, ESS jobs, OTBI, BI Publisher, Smart View, or VBCS., • Familiarity with government contracting, project-based financial accounting, burden rates, FAR/DCAA considerations, audit support, or controlled business processes., • Inclination to collaborate, elevating solutioning in a team-focused environment., • Experience in a fast-paced, agile and growing business., • Ability to efficiently plan work and meet deadlines., • Exceptional communication skills, both written and oral., • Preferred certifications in Oracle Fusion Cloud certification in Financials, Procurement, PPM, or related Oracle Cloud technologies. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. At Epirus, you'll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, "impossible" is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. Join us and rewrite the rules. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $123,700—$160,000 USD

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose We are seeking a talented and motivated Industrial Robotics Engineer to join our Robotics & AI Software team. In this role, you will have the opportunity to work closely with experienced automation and software engineers to develop and implement innovative algorithms for task and motion planning plus computer vision in robotic systems. As a key member of our team, you will contribute to the design, development, and testing of software solutions aimed at enhancing the efficiency and reliability of robotic software algorithms. This involves symbolic task planning, robot kinematics, collision detection, optimization, and computer vision. The Role • Develop and maintain software development best practices to ensure high-quality code, efficient testing, and timely releases., • Collaborate with other teams to ensure that our software integrates seamlessly with other software products., • Collaborate with senior engineers to understand project requirements and contribute to the development of software solutions for robot task and motion planning., • Design, implement, and optimize algorithms within our planning framework, leveraging your programming skills and understanding of robotics principles., • Assist in the integration and testing of computer vision software to ensure robustness and performance in real-world scenarios., • Document your work, including code, algorithms, user manuals, and procedures, to support knowledge sharing and future development efforts., • Stay updated on advancements in robot planning algorithms and technologies and contribute fresh ideas and insights to the team.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's in Computer Science, Robotics, or related field with 5+ years of professional experience., • Proficient in programming languages such as C++ and Python., • Strong knowledge of data-structures, algorithms, and design pattern., • Fundamental understanding of industrial robotics including manipulator kinematics & dynamics, robot trajectory generation, and communications protocols., • Expertise with search algorithms, optimization methods, and constraint satisfaction., • Experience with open-source robotic planning and manipulation software packages such as MoveIt and ROS., • Knowledge of unit-testing, CI/CD pipelines, and containerization (Docker, Kubernetes)., • Excellent communication and collaboration skills., • Ability to work effectively with cross-functional teams, including product managers & owners, engineers, and internal customersPreferred Qualifications, • Master's or Ph.D. in Computer Science, Robotics, or related field with 3+ years of professional experience., • Understanding of computer vision libraries such as OpenCV and PCL., • Experience using programming languages such as C#, TypeScript., • Explored using Generative AI in robotics., • Strong publication record and/or open-source contributions in the field of robotics.Work Environment, • Hybrid Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E05 - E06 as evaluated through our interview process. E05 / Senior: $141,380 -$194.390 E06 / Staff: $163,270 - $224,500 Pay Range$141,380—$224,500 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description We are looking for a Project Engineer to join our team and oversee certain aspects of construction projects, primarily the documentation and controls that support the construction process. The main goal of this position is to ensure that the project meets the intent of the contract documents. This is an exciting opportunity for an organized, detail-oriented professional with a background in construction who enjoys being at the center of project operations and ensuring all moving parts stay on track. About the Role: As a Project Engineer, you will be responsible for the oversight and organization of project control documents. This role is integral to project communication, project administration, and document control. If you’re passionate about construction management, skilled in document control and scheduling, and thrive in a fast-paced environment—this position is for you! Key Responsibilities: • Oversee and organize submittals, RFI’s, show drawings, plan logs, permit logs, procurement logs, and compliance documentation, • Coordinate and input schedules, safety inspections, and quality checks, • Manage meeting minutes, • Ensure all trades, systems, and sources have been fully examined for compliance, coordination, and appropriate approvals, • Provide support to project managers and superintendents What You Bring: • Experience: 2+ years in construction or related field, and/or bachelor’s degree in construction management or a related discipline. Moderate knowledge of multiple project types and trades. Participate in mid-size projects to large size projects., • Systems Knowledge: Proficient in Bluebeam, Procore, Excel, Word, Outlook, Zoom, MS Teams, AutoCAD (viewing)., • Skills: Proficient in plan reading, technical reading and writing, and critical thinking., • Attributes: Dedicated, resourceful, articulate, curious, analytical, reliable, organized, punctual. Position: • Reports to Project Manager and Senior Project Manager. Physical Requirements: • Desk and computer-based work., • Inspect job sites: walk 2-3 miles, climb stairs, ladders, and scaffolding., • Lift up to 15 pounds at a time., • Commute to job sites.Why Join Us?, • Work in a growing and supportive environment., • Gain exposure to a variety of construction projects., • Be part of a collaborative and knowledgeable team. If you're ready to take the next step in your career, we’d love to hear from you! Please attach a project list that includes project type, sf, and dollar value. Powered by JazzHR KLirGNt1Lj

Job DescriptionWho we are Metropolis is an artificial intelligence company that uses computer vision technology to enable frictionless, checkout-free experiences in the real world. Today, we are reimagining parking to enable millions of consumers to just "drive in and drive out." We envision a future where people transact in the real world with a speed, ease and convenience that is unparalleled, even online. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working and playing remarkable - giving us back our most valuable asset, time. Who you are Metropolis is seeking a Staff Software Engineer for our "Network Expansion" team. You will play a key role in building new functionality to support our expansion into new mobility verticals and larger, more complex parking markets. This role requires an individual who thrives in fast-paced environments, working both cross-functionally with product, design, and operations as well as working across multiple engineering teams. What you'll do • Provide technical direction that influences the entire company by formulating and implementing a technical vision and roadmap, • Lead large, cross-team initiatives through the entire development lifecycle, from ideation and requirements through successful launch, • Lead multiple engineering teams (10-15 engineers) towards a common goal, • Work cross-functionally with designers and product managers to understand, model, and solve real-world problems, • Own the outcomes! You're responsible for real-world metrics shifts and company-defining business outcomes, not just for shipping software, • Moderate technical discussions, evaluate new techniques, and ensure our platform is constantly evolving and improving, • Leverage best practices in automation testing and deployment to enable rapid iteration and launch of new features, • Help build a culture where bugs and mistakes in Production are treated as opportunities to improve the platform, • Be a great coach to bring the best out of our engineers and a key driver of hiring top talentWhat we're looking for, • MS or BS in Computer Science or equivalent work experience. Strong fundamental computer science skills, • 10+ years of experience building customer-centric applications and products, • Proven track record of designing and delivering distributed systems and software products in consumer-facing applications, • Experience with microservices, event-driven architectures, and related technologies and paradigms, • Experience with Agile engineering processes that support the entire software development life cycle, including TDD/BDD, CI/CD, and related build/test/deploy processes, • Experience with database technologies, especially MySQL and Postgres., • Excellent written and verbal communication skills with a proven ability to present complex technical information clearly and concisely to a variety of audiences, • Track record of successful cross-functional collaboration while building customer solutions in B2C and B2B settings, • Experience succeeding in situations with high levels of ambiguity, • Able to work in the office in one of Santa Monica (Los Angeles), New York City, or SeattleWhile not required, these are a plus:, • Advanced-level knowledge of Scala, • An advanced degree in a technical field, such as computer science, • Previous experience working inside innovative, high-growth environments, • Experience with leveraging AI technology to streamline engineering activitiesOur Stack, • Languages + Frameworks: TypeScript, React, Scala (principally), Java (limited), • Datastores: MySQL, PostgreSQL, Snowflake, • Cloud: AWS, • Version control: Git & GitHub, • AI Tooling: Copilot on GitHub and Claude Code, • Observability: Datadog 4 Days in Office: Metropolis values in-person collaboration to drive innovation, strengthen culture, and enhance the Member experience. Our corporate team members hold to our office-first model, which requires employees to be on-site at least four days a week, fostering organic interactions that spark creativity and connection. When you join Metropolis, you'll join a team of world-class product leaders and engineers, building an ecosystem of technologies at the intersection of parking, mobility, and real estate. Our goal is to build an inclusive culture where everyone has a voice and the best idea wins. You will play a key role in building and maintaining this culture as our organization grows. The anticipated base salary for this position is $220,000.00 USD to $250,000.00 USD annually. The actual base salary offered is determined by a number of variables, including, as appropriate, the applicant's qualifications for the position, years of relevant experience, distinctive skills, level of education attained, certifications or other professional licenses held, and the location of residence and/or place of employment. Base salary is one component of Metropolis's total compensation package, which may also include access to or eligibility for healthcare benefits, a 401(k) plan, short-term and long-term disability coverage, basic life insurance, a lucrative stock option plan, bonus plans and more.#LI-CM1 #LI-Onsite Metropolis may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate's application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, Metropolis retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. Metropolis Technologies is an equal opportunity employer. We make all hiring decisions based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including gender identity, sexual orientation, or pregnancy), national origin, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Job DescriptionPRINCIPAL ELECTRICAL ENGINEER (HARDWARE DESIGN) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Principal Electrical Engineer at Freeform, you will play an integral role in the design and development of custom electronics and compute systems that bring our AI-native metal 3D printing factory systems to life. You will solve challenging problems in fields such as high-performance compute, high speed communications, embedded hardware, motion control, autonomous robotic systems, and much more. You will use a first principles approach to solving problems and tackling new areas within electrical engineering that you may not have directly worked on before. The ideal candidate is capable of running projects from cradle to grave, acting as a technical lead, and has the ability to work effectively with other engineering disciplines. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Rapidly design, develop and test highly reliable electronics and compute systems that enable complex autonomous systems to perform reliability, repeatedly, and scalable, • Serve as the senior engineer on the team, driving technical direction, electrical architecture, product requirements, component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, productization, manufacturing, and testing, • Challenge assumptions and learn new design approaches, • Drive component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, manufacturing, and test, • Hands-on debugging of the unexpected via the use of laboratory test equipment, custom instrumentation, and testing setups, • Model and simulate circuit designs for analysis and performance, • Act as a technical lead, driving schedule and ensuring a continuous rate of innovation Basic Qualifications: • Bachelor's degree in electrical engineering, computer engineering, or similar engineering discipline, • 15+ years of professional experience designing and delivering complex electrical hardware, • Broad electrical engineering background; well versed in electrical engineering fundamentals and comfortable taking a first-principles approach to solving problems, • Experience operating as a technical lead and system owner, responsible for architectural decisions, execution quality, and technical accountability across the full lifecycle Nice to Have: • Advanced degree (Master's or PhD) in electrical engineering, • Experience with heterogeneous compute environments, including FPGA, GPU, and mixed architecture systems, with the ability to make thoughtful tradeoffs across performance, latency, and system complexity., • Experience with sensors, high speed cameras/imaging systems, and similar physical telemetry systems, • Experience with embedded microcontroller design and firmware, • Experience with high-speed data acquisition systems, high-accuracy motion systems, high-speed scanning systems, optomechanical assemblies, and complex electromechanical systems, • Familiarity with industrial automation technologies and robotics Location: Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $160,000-$300,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSENIOR SIMULATION ENGINEER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Simulation Engineer at Freeform, you will be responsible for developing physics-based, data-driven models that enable the first production scale, high quality, and fully automated metal 3D printing factory capability. We are looking for someone with deep knowledge in physical simulations and multi-physics phenomena who can develop sophisticated models from scratch for undefined or previously unsolved problem statements. This person needs to be comfortable working in an interdisciplinary environment that iterates quickly and decisively. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Develop high-performance numerical solvers for simulating the physics of advanced metal 3D printing systems, • Implement numerical simulation models for real-time or near-real-time performance on HPC or GPU platforms, • Work with software engineers to build and deploy physics-based and data-driven models of the laser powder bed fusion process, • Work with software engineers to integrate low-level solvers into simulation pipelines and interface with hardware systems, • Guide the integration of computational geometry and meshing techniques to support large-scale, physics-driven simulations, • Architect simulation modules for execution on specialized compute hardware including FPGAs and GPUs, • Contribute to the development of model-predictive control strategies alongside control engineers, • Generate and maintain documentation for all algorithms, solvers, and integrated systems Basic Qualifications: • Bachelor's degree in applied mathematics, physics, computer science, mechanical engineering, or a related technical field, • 5+ years of professional experience developing custom simulation solvers with a bachelor's degree, 2+ years of professional experience with a master's degree, or a PhD in one of the above fields in lieu of industry experience, • Demonstrated experience writing low-level numerical solvers for physical simulations, • Strong programming skills in C, C++, or CUDA, • Experience developing simulations in a high-performance compute environment (i.e. running on GPUs), • Academic or professional familiarity with solid mechanics, continuum mechanics, or other physical modeling domains Nice to Have: • MS or PhD in applied mathematics, physics, computer science, mechanical engineering, or a related field, • Experience with real-time or near-real-time simulations on GPU or parallel computing platforms, • Experience with direct numerical simulation (DNS) models, • Familiarity with solid mechanics, continuum mechanics, or other physical modeling domains, • Experience with thermo-elastic or thermo-elastoplastic modeling, • Familiarity with computational geometry and meshing techniques, • Experience with data-driven modeling techniques and hybrid physics/data simulation methods, • Familiarity with optimization techniques and control theory, • Experience with 2D and 3D meshing libraries and tools, • Creative problem solver with a strong foundation in first-principles thinking and numerical analysis, • Strong written and verbal communication skills Location: • Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country., • Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $150,000-$225,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSENIOR SOFTWARE ENGINEER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Senior Software Engineer at Freeform, you will be responsible for architecting and implementing critical software systems for our autonomous 3D printing factories. You'll have an opportunity to touch many different aspects of our software ecosystem from hardware control, to high-rate telemetry and big data storage systems, to high-performance compute and machine learning pipelines. We don't develop software in a vacuum, we develop it alongside a multi-disciplinary team with specific, real-world purposes, so collaboration and systems-level thinking are essential to success. If working in an environment where you can rapidly deploy code to solve problems on the cutting edge of AI-enabled manufacturing technology sounds exciting, we'd love to hear from you! 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Architect and develop software for an advanced, production-scale metal 3D printing system, • Work with mechanical engineers, electrical engineers, and physicists to integrate control algorithms into production software, • Improve and scale out petabyte-scale, high-rate telemetry, storage, and retrieval systems, • Use computer science and engineering fundamentals to solve notoriously challenging algorithmic and optimization problems, • Develop high-performance compute solutions using GPU parallel processing, • Move fast, innovate, don't over-engineer things, be a good teammate, be flexible and open to new ideas, and push the bounds of what's possible Basic Qualifications: • 5+ years of professional experience in software development, • Proficiency in a systems level programming language such as C/C++ or Rust, • Experience with high-performance systems software such as hardware control systems, embedded software, high-volume telemetry systems, graphics rendering, or similar Nice to Have: • Bachelor's or advanced degree in computer science or computer engineering, • 8+ years of professional software development experience, • Experience building out backend infrastructure, high-performance storage solutions, streaming processing systems, scientific analysis pipelines and workflows, • Experience writing software for industrial automation systems, robotics, or related hardware, • Experience with operations systems, computer architecture, or similar computer systems internals, • Experience with computer graphics or similar geometry-intensive problems, • Experience operating as a technical lead, driving architectural decisions and mentoring junior engineers Location: Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $150,000-$250,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. IT Rocket Lab's IT team is responsible for how our global teams access information and run operations across our computer systems, networks, and devices. Our hardworking IT team is a group of flexible problem-solvers working in a fast-paced environment, but who also thrive under the challenge of supporting all of our proprietary systems and people, from finance to launch operations. SENIOR ANALYTICS ENGINEER I Based onsite at Rocket Lab's global headquarters in Long Beach, CA, the Senior Analytics Engineer I, as part of the Business Intelligence team, is responsible for driving strategic initiatives with measurable business impact, architecting scalable data solutions, and shaping team technical direction. This role balances hands-on technical work including mentoring (70%), cross-functional collaboration (20%), and continuous learning (10%). You'll design data architectures, establish engineering standards, lead analytical initiatives, and mentor team members while delivering enterprise-level solutions that drive business strategy and operational excellence. WHAT YOU'LL GET TO DO: • Data Engineering & Architecture, • Design and build scalable data architectures using advanced SQL, dbt frameworks, and multiple ETL/ELT tools (Azure Data Factory, SSIS, Databricks or modern open-source tools), • Implement metadata-driven pipelines at scale and lead data modeling efforts across multiple subject areas, • Optimize performance at enterprise scale using cloud/on-prem advanced features, Python, and streaming/real-time data patterns, • Business Intelligence & Analytics, • Lead analytical initiatives and design comprehensive KPI frameworks that influence business strategy and establish RBAC/RLS security, • Design semantic layers and enterprise data models using TDML, Power BI (DAX, M Query), Tableau, and Grafana, • Data Governance & Quality, • Design and implement data governance frameworks including metadata management, privacy policies, and retention standards, • Lead incident response for data quality issues, conduct root cause analysis, and deliver remediation plans, • Conduct peer reviews of SQL, dbt, Python, DAX, and M Query code, ensuring adherence to best practices, • Other Collaborations, • Mentor junior engineers on engineering best practices, performance optimization, and visualization design principles, • Partner with Director-level stakeholders and business leaders to translate requirements into technical solutions, • Participate in sprint planning, technical design reviews, architecture discussions, and roadmap planning, • Other duties as reasonably required YOU'LL BRING THESE QUALIFICATIONS: • 5+ years of experience and a bachelor's degree or equivalent experience with a high school diploma or GED (9+ total years), • Technical Expertise in the following:, • Demonstrated expertise in analytics engineering or data platform development, • Expert-level data modeling and architecture design across multiple subject areas, • Proficiency with ETL/ELT tools: Azure Data Factory, SSIS, Databricks, and dbt or modern open-source tools, • Hands-on Kubernetes experience (deployment, cluster management, best practices), • Advanced Power BI development (DAX, M Query, TDML, semantic layers), • Cloud platform experience (Azure or AWS), • Proven technical leadership with ability to establish standards and mentor engineers, • Agile/Scrum methodology experience, • US citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Advanced SQL skills including execution plans, indexing, and performance tuning, • Power Automation experience such as PowerApps and Power Automate, • Microsoft Azure/AWS Certifications or any other related to BI Data Warehouse, • Cloud computing and deployment experience., • Excellent communication skills with ability to partner with Director-level stakeholders, • Excellent Problem Solving and Analysis skills. ADDITIONAL REQUIREMENTS: • Sit at desk and operate computer, keyboard, and office equipment for extended periods, • Review documents, view computer screens, and distinguish details at varying distances, • Mobility to move between buildings, attend meetings, and access different work areas, • Occasional exposure to production environments with moderate noise levels, dust, and fumes Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$101,600—$127,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionDescription: Air Treatment Corporation is a dynamic, collaborative work environment. We understand the expectations of high–quality customer service, therefore we actively search and promote a cohesive team that is formulated to exceed expectations. We are devoted to the growth of our employees and look to provide opportunities for advancement from within, while providing a robust benefit package to our team members. Job Summary: Inside Sales Engineer – Level II acts as a liaison between internal customers, and manufacturers. Constant communication is required to provide general information, service, maintenance, and repair updates related to the different stages of the product/project. Job Code: Administrative/Sales Location: Brea, CA Salary: Non-Exempt/Hourly Estimated Pay: $85k - $110k Duties / Responsibilities: Pre-Bid Duties: • Review bid calendars from customers., • Identify project opportunities to bid., • Perform takeoff – including interfacing with customer as necessary to collect relevant bid documents, plans, and specifications., • Use multiple factory software tools to create equipment selections, performance data and specifications., • Generate quote letters and price summaries based on customer requests and/or project plans and specifications., • Communicate with factories for special options and pricing., • Update and manage bid documents and quote requests in ATC CRM. Project Management Duties: • Create submittal documents for various products., • Work with sales engineers to gain approval for submittals., • Enter orders to factories., • Enter stock orders in ATC CRM., • Relay shipping information between factory and customer., • Interact with credit team and CRM coordinators as necessary., • Track orders/shipments as necessary., • Coordinate equipment startup requirements with ATC Service department., • Assemble project closeout documents., • Process warranty claims with manufacturers., • Process and track RMAs with customers and manufacturers., • Update and manage orders in ATC CRM. Additional Duties: • Provide engineering support as needed., • Attend jobsite and/or customer visits to assist sales engineers., • Attend in-house factory training, ATC trainings, factory/webinar and online trainings., • Train fellow ISEs upon attending factory training sessions., • Be knowledgeable of locations for factory literature and technical resources., • Keep current with factory software versions., • Assist and direct customers with requests., • Demonstrate a working knowledge of ISE Level 1 skillset, as well as knowledge of factory resources and proper engagement of their assistance. Requirements: Required Skills / Abilities: • Strong technical HVAC background, • Excellent verbal communication skills, demonstrating tact and diplomacy., • Excellent interpersonal and customer service skills., • Excellent organization skills and attention to detail., • Proficient in time management and ability to meet deadlines on assignments., • Demonstrated problem solving skills., • Proficient with Microsoft Office Suite (Outlook, Word, Excel), Internet Browser (Chrome), and related Microsoft CRM software. Education and Experience: • Associate degree with three years of directly related HVAC industry experience., • Bachelor’s degree in related field / B.S. in Mechanical Engineering preferred., • One to three years of related experience required. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 25 pounds at times., • Vaid driver’s license and no major driving violations., • Travel to meet with clients or potential clients will be required on occasion., • On-site, in office. At Air Treatment Corporation we are dedicated to growth, innovation, and diversity. As leading experts in HVAC & R solutions, we believe that the success of our team is the success of our company. This is echoed in our commitment to an equal and inclusive environment. We commit to fair hiring and policies, and we want you to join a team that celebrates authenticity and empowers new, diverse perspectives.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR CYBERSECURITY ENGINEER I - TOP SECRET CLEARANCE Based out of Long Beach, CA, the Senior Cybersecurity Engineer I - Top Secret Clearance will be responsible for designing, implementing, and maintaining the security infrastructure of SDA programs. This role requires a deep understanding of security principles, advanced technical skills, and the ability to stay ahead of emerging threats. The ideal candidate will have extensive experience in software security engineering, a proactive approach to problem-solving, and a passion for protecting sensitive information. WHAT YOU'LL GET TO DO: • Design, implement, and manage security solutions to protect the programs IT infrastructure, including networks, servers, and applications., • Conduct regular security assessments, vulnerability scans, and penetration tests to identify and mitigate security risks., • Develop and enforce security policies, procedures, and standards to ensure compliance with industry regulations and best practices., • Monitor security systems and respond to security incidents, providing detailed analysis and remediation., • Collaborate with IT and development teams to integrate security best practices into the software development lifecycle., • Stay current with the latest security trends, technologies, and threats, and recommend enhancements to improve the organization's security posture., • Mentor and provide guidance to junior security engineers and other IT staff. YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in Computer Science, Information Security, or a related field., • Active Top Secret security clearance required upon hire, • 5+ years of experience in system security engineering or a related role., • 8140 Intermediate or Advanced certification (e.g. Security+, Cloud+, CISSP, CISM, CEH, or equivalent), • Strong knowledge of security frameworks and standards (e.g., NIST 800, ISO 27001, CIS Controls)., • Proficiency in security tools and technologies (e.g., firewalls, IDS/IPS, SIEM, endpoint protection)., • Experience with cloud security (AWS, Azure, GCP) and securing hybrid environments., • U.S. citizenship is required, due to program requirements. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's degree In Computer Science, Information Security, or related field., • Excellent understanding of network protocols, operating systems, and application security., • Experience with DevSecOps practices and tools., • Experience with incident response and digital forensics., • Familiarity with scripting and automation (e.g., Python, PowerShell), • Strong analytical and problem-solving skills, with the ability to think critically and act decisively under pressure., • Excellent communication and interpersonal skills, with the ability to work effectively with cross-functional teams. This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$120,000—$155,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description At Commure, we're building the AI Operating System for healthcare, the foundation that defines how care is delivered, documented, and financed. Our platform spans the full care journey: Ambient AI and Dictation eliminating documentation burden at the point of care, intelligent Agents automating patient and revenue workflows, and autonomous RCM processing billions in claims, all on a single AI-native platform integrated with 60+ EHRs. Healthcare carries a $1 trillion administrative burden and we're at the center of transforming it. Today, 500,000+ clinicians across 500+ healthcare organizations nationwide trust Commure to handle $25B+ in annual claims and support over 200 million patient interactions. Our latest $70M raise at a $7B valuation reflects the confidence the market has placed in this mission. We've also been named to the Fortune Future 50 list and the 2026 AI Breakthrough Awards for “Overall NLP Company of the Year.” Our team works directly alongside clinicians, not through layers of process, which means the gap between what you build and its impact on patient care is immediate. We move fast, deploy daily, and take full ownership from early thinking to production. If you're energized by hard problems, high stakes, and a team that holds itself to a high bar, you'll find your people here. The future of healthcare is being built right now. Come deliver this transformation. About the Role At Commure, our engineering team is at the forefront of revolutionizing healthcare technology by building and scaling the systems powering our suite of healthcare products. We are looking for a talented Staff Backend Engineer to help us craft user-friendly, responsive, and secure interfaces that operate reliably at scale and enhance the healthcare experience for both providers and patients. If you are a builder and love working on important, exciting problems in healthcare and love shipping quickly, come join us! What You'll Do Drive the technical vision and architecture for critical backend systems and platform services. Lead large, cross-functional engineering initiatives from design through production. Influence engineering strategy and architectural decisions across multiple teams. Design scalable, reliable, and secure distributed systems that power mission-critical healthcare workflows. Mentor engineers through design reviews, technical guidance, and engineering best practices. Improve system reliability, observability, performance, and developer productivity. Partner closely with Product, Infrastructure, and Clinical teams to deliver impactful technical solutions. Build and operate services using Python, Go, FastAPI, Flask, Kubernetes, and cloud-native technologies. What You Have Bachelor's degree in Computer Science, Engineering, or equivalent practical experience. 8+ years of backend software engineering experience building large-scale distributed systems. Deep expertise in Python and/or Go and modern backend architectures. Experience leading technical initiatives and influencing engineering direction across teams. Strong knowledge of cloud infrastructure, Docker, Kubernetes, APIs, and microservices. Proven track record delivering scalable, reliable systems and making sound architectural decisions. Excellent communication, mentorship, and cross-functional collaboration skills. A builder mindset with a passion for moving quickly and solving complex healthcare challenges. Please be aware that all official communication from us will come exclusively from email addresses ending in @commure.com. Any emails from other domains are not affiliated with our organization. Employees will act in accordance with the organization’s information security policies, to include but not limited to protecting assets from unauthorized access, disclosure, modification, destruction or interference nor execute particular security processes or activities. Employees will report to the information security office any confirmed or potential events or other risks to the organization. Employees will be required to attest to these requirements upon hire and on an annual basis. Compensation Range: $200K - $250K

Job DescriptionDescription: Position: Outside Sales Engineer – Equipment- Location: Orange County/Inland Empire - Remote Reports To: Vice President of Sales Classification: Exempt R.F MacDonald Co. has been in business since 1956 serving California and Nevada. We have over 250 employees involved in sales and service of boilers and pumps for commercial and industrial applications. We have over 50 employees involved in equipment sales and over 125 employees involved in our parts and field service business. We have many employees that have been with our company for ten to fifteen years or more. We have also attracted and retained many employees that have been in the industry for many years prior to joining our company. As we have grown our experienced employees have trained our new employees. We strive to be the most experienced company in the industry we serve. Our VISION STATEMENT reflects the fact that our employees make up what our company is all about: "To provide a superior growth oriented workplace environment, that attracts and retains the best employees in the industry, fostering an attitude that provides our customers with the most innovative, responsive and results oriented effort possible." Position offers health and welfare benefits where compensation will be commensurate with experience. Job Summary R.F. MacDonald Co.’s in Santa Fe Springs/Inland Empire is hiring for an Outside Sales Engineer to join our team! In this role, you will be responsible for proactively calling on contractors, specifying engineers and end-users to develop long-term relationships and generate sales prospects. The expectation is that Outside Sales Engineers will be out of the office three to four days per week and in the office one to two days per week for meetings and to complete necessary paperwork. Responsibilities • Determine client’s needs, and develop and execute an account/system specific solution., • Provide equipment selections and technical detail to engineers, contractors and end-users., • Prepare proposals and submittals., • Advise customers and RFM team on technical questions/issues., • Assist with coordination of equipment purchases with vendors., • Provides project management support over the duration of a project., • Maintain personal data quality in the company’s CRM system., • Works with the administrative personnel to process needed paperwork for vendors and customers. Requirements: • Bachelor's degree in mechanical engineering, chemical engineering, engineering technology, or equivalent from a four-year college or university is preferred., • Ideal candidate will have experience with HVAC systems, steam theory, controls, and/or technical sales., • Good knowledge in appraising the customer’s needs for the sale of various products including hydronic and steam boilers and other equipment in a hydronic system (pumps, expansion tanks, buffer tanks, air separators, chemical pot feeders) or steam system (deaerators/boiler feed systems, blowdown separators, water softeners and chemical feed systems)., • Must be willing to further their knowledge in these areas and any others that will be applicable to the Company’s growth., • Strong presentation skills and ability to present on technical topics to contractor and engineer audiences., • Strong language skills as well as industry specific vocabulary., • Computer skills. Must be proficient with Word, Excel, PowerPoint and CRM (our contact management program). Other Requirements: A valid driver's license is required. Must be insurable with no major infractions. Job will require some travel. Supervisory Responsibility This position has no direct supervisory responsibilities. Work Environment This job operates in both a professional office environment and in internal and external environments which may include inclement weather conditions. Travel to customer job sites is required, which may include outdoor work and/or work in mechanical/equipment rooms. During the site visits, the employee may be exposed to variable weather conditions; moving mechanical parts; heights, and other variable environmental conditions based on location. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This position is not entirely a deskbound role; however, filing, correlating, reproduction and binding materials are required. This would require the ability to lift files, open filing cabinets, climb stairs, and prepare training and meeting rooms/spaces as necessary. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5:00 p.m. This position regularly requires long hours and occasional travel work as job duties demand. Travel Travel is required for this position to customer sites with out-of-area and possible overnight travel expected. Travel is occasional to all RFMCo. office locations within its operating cities, with out-of-area and overnight travel expected. Other We offer competitive compensation and comprehensive benefits and training that help our employees thrive in both their professional and personal lives. We are proud of our culture which is inclusive and respectful at its core. We value our industry partnerships and are committed to maintaining a healthy and sustainable workplace. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, age, marital status, disability, status as a protected veteran, or any legally protected status.

Job Description Electrical Engineer Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The Electrical Engineer builds on foundational experience to take independent ownership of portions of project design, documentation, and coordination. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role is trusted to perform electrical engineering tasks with minimal supervision and supports project delivery from concept through construction. Electrical Engineer serves as a technical contributor and emerging mentor, contributing to electrical calculations, code research, QAQC, and coordination across disciplines. Individuals in this role are expected to deepen their technical knowledge, begin supporting client interaction, and develop the critical thinking required for future engineering leadership roles. Essential Functions: • Lead design development and electrical calculations for assigned electrical systems across schematic, design development, and construction document phases., • Independently perform lighting and power load calculations, feeder sizing, short circuit studies, and NEC compliance checks with minimal input., • Prepare technical documentation for electrical systems, including system descriptions, Division 26 specifications, equipment schedules, and redline markups., • Develop and review electrical system layouts in Revit—including power, lighting, fire alarm, and single-line diagrams—in coordination with architectural and structural backgrounds., • Coordinate electrical design with internal disciplines (mechanical, plumbing, lighting, sustainability) and external consultants (e.g., low voltage, civil) to resolve design conflicts., • Review and respond to electrical RFIs and submittals, with support from senior engineers as needed., • Perform field verification for electrical conditions, assist with punch walks, and participate in electrical construction observation visits., • Participate in early-phase project design strategy discussions and support electrical discipline leads with technical input., • Engage in internal QAQC processes and perform peer reviews of electrical drawings and documentation for code compliance and drafting consistency., • Begin mentoring electrical designers and interns on software use, modeling best practices, documentation standards, and calculation basics., • Participate in internal and external project meetings, and support the preparation of agendas, meeting minutes, and follow-up documentation with a focus on electrical scope., • Track and manage hours on assigned electrical work and assist in project planning discussions regarding scope and resource allocation. Requirements • Bachelor’s degree in electrical engineering or equivalent required., • P.E. licensure required., • 5+ years in the AEC Industry required along with previous experience developing electrical solutions for crime labs, medical examiner labs and other comparable facilities - required., • An understanding of the financial status of projects as they progress, development of cost budgets for projects, value of client relationships and be able to deliver projects with a focus on the quality is preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills required., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Electrical Designer - Mission Critical HED is looking to add an experienced team member to our group of talented Electrical designers. The Electrical Designer - Mission Critical builds upon foundational experience to deepen technical capabilities and take greater ownership of assigned design work. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role is trusted to perform electrical engineering tasks with minimal supervision and supports project delivery from concept through construction. Electrical Engineer serves as a technical contributor and emerging mentor, contributing to electrical calculations, code research, QAQC, and coordination across disciplines. Individuals in this role are expected to deepen their technical knowledge, begin supporting client interaction, and develop the critical thinking required for future engineering leadership roles. Essential Functions: • Lead design development and electrical calculations for assigned electrical systems across schematic, design development, and construction document phases., • Independently perform lighting and power load calculations, feeder sizing, short circuit studies, and NEC compliance checks with minimal input., • Prepare technical documentation for electrical systems, including system descriptions, Division 26 specifications, equipment schedules, and redline markups., • Develop and review electrical system layouts in Revit—including power, lighting, fire alarm, and single-line diagrams—in coordination with architectural and structural backgrounds., • Coordinate electrical design with internal disciplines (mechanical, plumbing, lighting, sustainability) and external consultants (e.g., low voltage, civil) to resolve design conflicts., • Review and respond to electrical RFIs and submittals, with support from senior engineers as needed., • Perform field verification for electrical conditions, assist with punch walks, and participate in electrical construction observation visits., • Participate in early-phase project design strategy discussions and support electrical discipline leads with technical input., • Engage in internal QAQC processes and perform peer reviews of electrical drawings and documentation for code compliance and drafting consistency., • Begin mentoring electrical designers and interns on software use, modeling best practices, documentation standards, and calculation basics., • Participate in internal and external project meetings, and support the preparation of agendas, meeting minutes, and follow-up documentation with a focus on electrical scope., • Track and manage hours on assigned electrical work and assist in project planning discussions regarding scope and resource allocation. Requirements • Bachelor’s degree in electrical engineering or equivalent required., • P.E. licensure required., • 5+ years in the AEC Industry preferred., • An understanding of the financial status of projects as they progress, development of cost budgets for projects, value of client relationships and be able to deliver projects with a focus on the quality is preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills required., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionSummaryOur client, located in Los Angeles, CA is a highly sought after, very successful mechanical general contractor. They are in immediate need of a Mechanical Project Engineer to join their high performing team. As a result of their unparalleled customer service and unique offerings, their business is experiencing impressive growth and with growth comes great opportunity for those with the ambition to accomplish great things. A career with our client is not just a job but an opportunity to join a family of people who care about each other and care about their customers.The ideal candidate will be responsible for assisting the Project Manager with project direction, planning, completion, and financial outcome. In order to succeed in this position, the candidate must be organized and have excellent time management skills. Duties & Responsibilities • Performs a key role supporting the Project Manager in all aspects of Plumbing & HVAC construction, • Works with and supports Field supervisors, • Attends project meetings as necessary, • Responsible for keeping project logs updated and current, • Prices change orders, • Handles all aspects of RFI’s (Request For Information) in conjunction with Project Manager, • Assists in Submittal process, • Assists in procurement process, • Works with BIM department in a support role, attends BIM coordination meetings as necessary, • Downloads project files and distributes to team members, • Manages responses from design team and distributes to team members, • Assists in developing Man-loading charts in conjunction with foreman and Superintendents, • Ensures timeliness of submissions to Contractor, • Assists Project Manager in project projection process, • Performs printing and copying tasks as needed and directedQualifications & Requirements, • Mechanical, business degree, or related plumbing or mechanical systems experience, • Excellent communication skills, • Computer skills to include Microsoft Excel, Word and Project, • Able to listen and follow through on directions provided, • Desire to work in a team environment while learning on the job, • Education:, • B.S. in construction engineering management, • B.S. in construction management, • B.S. in Mechanical engineeringBenefits Offered, • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job DescriptionCompany Description Why work for Fairmont? At Fairmont, our passion is to connect our guests to the very best of our destinations. From the beaches of Hawaii to the deserts of the United Arab Emirates to the heart of London, our hotels offer guests extraordinary places, created by combining unique architecture, expressive decor and artistry, and magnificent features. Add engaging service, and the result is an unforgettable guest experience. Your team and working environment: What was true in 1966 remains true to this day: The Century Plaza Hotel is part of a visionary development intent on doing what others could only imagine. Previously deemed the “Western White House,” (as the only venue outside the White House to host state dinners), Century Plaza’s place in history remains unshakeable. A modernized take on luxury and elevated guest experience from product to people enlivens the real wow factor. This experience begins with a new kind of workplace, one where the energy is contagious, the stories are invigorating, and the challenges present inspiring opportunities to make your mark. We provide an environment of trust, respect, and integrity. A home away from home. Where diversity and inclusion are celebrated. Privacy and personal information are protected. Through Accor’s Employee Value Proposition, we ensure fair treatment and a workplace free from discrimination & harassment. Job Description Director of Engineering Fairmont Century Plaza is looking for a dynamic leader who is highly organized and capable of providing leadership, guidance and direction in achieving the hotel’s vision and mission. Reporting to the Hotel Manager, the Director of Engineering will be responsible for implementing Accor engineering and work standards and overseeing the engineering department operation. What you will be doing: • Oversee the engineering department with attention to details and follow-up to ensure satisfactory completion of tasks and projects, • Maintain all equipment and systems in correct operational status including but not limited to Accor MEP standards, Fire & Life Safety standards, Risk Management, environmental standards, expenditures and project management., • Ensure proper completion of the Preventive Maintenance Program for guest rooms, public areas, and safety systems while working closely with the Rooms Division, Food & Beverage Department, Security, purchasing and other operational departments., • Maintain all mechanical rooms inclusive of Boiler Plant, chilled water circulation, air handling units, fan coils, VAVs, motors, pumps …etc., • Prepare and control of the monthly and annual engineering department budget, • Experience in yearly engineering-budget preparations and monthly forecasting of the department’s expenses, • Forecast and manage the hotel energy and water usage and all the associated costs, • Prepare CAPEX expenditures for the engineering department and assist all other departments in preparing their CAPEX needs, • Identify issues and provide solutions, inclusive of outsourcing and managing 3rd party companies, • Identify, budget for and manage projects related to renovations and or replacements within the hotel, • Run landscaping both summer and winter operations, • Pool operations knowledge inclusive of water treatment, • Understand water treatment for closed systems and maintains all the related logs for testing of chemicals balance and legionella control., • Work closely with the purchasing department to source the best products for the least cost, • Monitoring the Hotel's Energy consumption on daily and monthly basis., • Ensuring prompt and/or immediate response to maintenance requests from our guests, employees, and management of the Hotel., • Recruiting, scheduling, payroll, performance appraisals and reviews, training and development of all engineering colleagues, • Coordinate and complete all audits related to engineering and risk management, • Responsible for departmental health and safety, training programs, statutory compliance, • Manage the hotel emergency response team in coordination with Security and hotel management, • Coordination and management of outside contractors., • Ensure hotel compliance with all City and State regulations and ordinances, • Actively participate in the Hotel's Energy Management, Occupational Health & Safety, and Environmental programs., • Lead and support a diverse team in the operations and maintenance of the hotel including: general maintenance, HVAC, kitchen repairs, carpentry, electrical, plumbing and grounds, • Set up and attend monthly departmental meetings for the engineering employees, • Manage at hotel level ACCORs Energy/Sustainability Programs, • Be available on an ‘on-call’ basis during off hours for emergency situations, • Attend to all requests from the General Manager and Director of OperationsQualifications Your experience and skills include: • Bachelors’ degree in the engineering field with a minimum of 5+ years’ experience in a similar position in a hotel, OR a technical degree with 8+ years in a similar position with project management experience in the hospitality industry, • Team player and a proven team builder., • Union experience, preferred, • Professional Engineer Designation an asset, • Knowledgeable in all municipal codes, City codes, State regulations, OSHA regulations as well as the Fire Department requirements and building testing., • Proven negotiation skills with 3rd parties and contractors, • Excellent interpersonal, written and verbal communication skills, • Highly organized with the ability to be flexible, and to work well under pressure., • Must be computer literate and familiar with computerized maintenance systems, • Must lead by example by displaying a high standard of performance with the ability to communicate these expectations to the team to achieve above expectation results., • Hours of work and days off will vary according to business demands., • Able to work in a fast-paced, upscale, luxury hotel that caters to leisure, meetings & conference environments. Additional Information What is in it for you: • Salary Range: $170,000 - $200,000 USD, • Discounted hotel rooms and food & beverage rates to employees at our sister properties around the globe., • We provide learning programs through our Academies to promote growth and development so that you can perform at your full potential, • Opportunity to develop your talent and grow within your property and across the world!, • Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21 and WATCH, • Competitive Health Benefit Package within 30 days of employment, • 401(k)/Roth IRA Eligibility after 60 days of employment, • Cell Phone Usage Reimbursement Why work for Accor? We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities. By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/ Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS" Our commitment to Diversity & Inclusion: We are an inclusive company and our ambition is to attract, recruit and promote diverse talent. We commit to a future where diverse identities are celebrated, and equitable and inclusive practices are woven into the fabric of everything we do as an organization. Fairmont Century Plaza is an Equal Opportunity Employer EEO M/F/V/D Visa Requirements: Must provide proof of current eligibility to be employed in the United States of America.

Job Description Company Overview: SOE is an engineering consulting firm that specializes in electrical, electromechanical, and embedded systems. Founded in 2016, we have 30+ engineers across offices in El Segundo, CA and Redmond, WA. In that time, we've completed over 250 projects for more than 100 clients. Our designs control rocket engines, manage satellite communications, instrument fusion reactors, and are enjoyed by consumers around the world. We approach problems from first principles. We break challenges down to their most fundamental components, which is how we find solutions that hold up across industries, use cases, and engineering functions. We focus on solving the right problems and building the teams to take them on. Because we believe that training and empowering others yields a greater impact than focusing on developing any specific technology, we expect every single member of our team to participate in building up those around them. In the past two years, we've generated a new avenue of growth. We've started taking our own internal concepts and incubating separate companies that we believe will meet the emerging needs of our clients and the industry at large. We currently have two of these companies in stealth that our team is actively working on, one in nuclear energy and one in space telecommunications. Information about SOE's mission, vision, and values can be found here. Examples of the projects SOE has worked on can be found here. Job Overview: We are looking for a High Speed Digital Electrical Engineer to work across client programs that demand hardware performing at the edge of what is commercially possible. This is a hands-on design role. You will own high-speed digital PCB design, signal integrity, and FPGA development across a range of programs - from space avionics and optical communication systems to power electronics and embedded computing platforms. No two programs are identical, and you will bring the same first-principles rigor to each one. You will work alongside engineers who have shipped flight hardware and know what it takes to close a design in a real program environment. You will have direct client exposure, ownership over your technical deliverables, and access to programs that rarely show up at larger firms. As SOE grows our incubation model, high-speed digital engineering sits at the center of the most technically demanding programs we take on. This role is a direct line into that work. Key Responsibilities: • High Speed Digital Design, • Support high speed electrical architecture from concept generation through investigation including key trades, requirement definition, investigations and component selection., • Own signal integrity from component selection and schematic capture through layout and post-route simulation: impedance control, differential pair routing, crosstalk analysis, and eye diagram verification., • Work with power electronics engineers to inform and design power delivery networks for high-performance ASICs, FPGAs, and multi-channel memory; close power budgets from system architecture through regulator selection and decoupling strategy, • Develop and execute high-speed board bring-up: BERT testing, TDR characterization, eye mask compliance, and EMC pre-compliance, • Design in Altium; produce layout-ready packages with full design rule documentation for contract manufacturing, • Space Qualification & EMI/EMC, • Incorporate environmental requirements across programs: radiation tolerance, thermal cycling, vibration, shock, and vacuum outgassing where applicable, • Select and qualify components for space-grade or radiation-tolerant operation; manage parts lists and evaluate COTS mitigation strategies, • Select and implement best design practices that minimize the down-stream risk of test failures from EMI/EMC. Familiar with industry standards such as STD-461, DO-160, and MIL-STD-461., • Author and maintain design specifications, interface control documents, and test procedures at the level demanding programs require, • Client & Team Collaboration, • Work directly with clients to translate system requirements into board-level hardware specifications, • Contribute to technical reviews (PDR, CDR) as both a presenter and reviewer across programs, • Support junior engineers through design reviews and hands-on mentorship, • Contribute to SOE's internal body of knowledge: reusable design patterns, documentation standards, and lessons learned Minimum Qualifications: • Bachelor's Degree (Electrical Engineering, Computer Science, Physics, Math, or related field), • 5+ years of applied experience with a demonstrated passion for engineering and technology development, • Experience with high-speed test equipment and debug tools: BERT, VNA, TDR, high-bandwidth oscilloscopes (20 GHz+), and logic analyzers., • Excellent written and verbal technical communication skills; ability to explain technical concepts and their implications to non-technical audiences, • A systems-thinking approach, with the ability to connect engineering execution to business strategy., • A proven track record of leading technical initiatives, mentoring engineers, and driving process improvements., • A bias for action, thriving in a fast-paced consulting environment where priorities can shift quickly., • Willingness to be deeply involved in both high-level strategy and hands-on technical execution. Preferred Qualifications: • 10+ years of relevant experience, • Experience designing electronics for space-qualified or radiation-tolerant applications, including component derating, single-event effects (SEE) analysis, or environmental test campaigns (thermal vacuum, vibration, shock), • Familiarity with 400G/800G Ethernet architectures, PAM4 signaling, or co-packaged optics interfaces, • Experience with power integrity analysis tools and multi-phase VRM design for high-current, fast-transient loads, • Background in optical communication systems or the electrical interface between high-speed digital hardware and analog RF or opto-electronic signal chains, • EMI/EMC test experience to MIL-STD-461 or DO-160, • Experience with business development, sales engineering, or technical sales to support the CEO in client engagements., • Prior work in an engineering consulting or services-based firm, understanding the nuances of client-driven project work., • Understanding of operations, finance, or project management, helping streamline engineering execution at a business level., • A history of patents, publications, or open-source contributions, demonstrating thought leadership in the field. Additional Requirements: • Applicant must be willing to work 40 hours a week on-site in El Segundo, California, USA, • Applicant must be eligible to work on ITAR projects, • Job Type: Full-time (Salary) ITAR Requirements: • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Unfortunately, we are unable to provide sponsorship at this time. Benefits: • Salary range dependent on leveling, • Senior Engineer: $155,00- $200,000, • Staff Engineer: $195,000 - $235,000, • Principal Engineer: $235,000 - $270,000, • Equity (via ISOs) in Second Order Effects, Inc., • Equity (via PIUs) in our incubated companies (through our holding company, Second Order Holdings, LLC), • 100% employer-paid health insurance (Medical, Dental, Vision) for employees + 50% dependent coverage, • Flexible paid time off policy + 11 paid holidays + 12 paid sick days, • 401(k) retirement account and employer matching (Safe Harbor 4%), • Up to 22 weeks of paid parental leave dedicated to new child bonding, • Relocation assistance available if 50+ miles away from the office, • Electric Vehicle (EV) charging ports, • Daily catered lunches, snacks, and accessible kitchen, • & more! If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Second Order Effects is proud to be an Equal Opportunity Employer; employment with SOE is governed on the basis of excellence and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Job DescriptionSalary: $135,000.00 - $150,000.00 Senior Systems Engineer Job Description Summary Jeffer Mangels & Mitchell LLP (JMM) is a results-driven law firm with a relentless focus on client satisfaction. It is through this focus that our work has a purpose and develops into a passion. We take pride in providing our clients with the results they deserve. If you thrive in an environment where your colleagues' defining characteristics are achievement, adaptability, initiative, professionalism, and resourcefulness, the culture at JMM will prove rewarding. The Senior Systems Engineer is a critical part of the Firm's IT Department, supporting the Firm's technology infrastructure with deep expertise in networking and advanced Windows Server management. In this role, you will architect and maintain critical infrastructure across both networking and server environments, with responsibilities extending to certificate management and disaster recovery. You will collaborate with administrative teams and attorneys to ensure optimal performance, security, and scalability across all IT services, providing high-level technical leadership on complex infrastructure projects. Essential Duties • Deploy, manage, and optimize virtualization platforms such as VMware, VxRail, and NAS for high-performance computing and storage., • Design, implement, and manage Layer 2/Layer 3 network infrastructures, including advanced switching, routing, and inter-VLAN routing., • Configure and maintain routing protocols such as BGP, OSPF, and static routes to ensure robust network performance and high availability., • Manage network VLANs, spanning tree protocols, and link aggregation (LACP/EtherChannel) to optimize redundancy and throughput., • Administer and secure networks with firewall policies, NAT rules, and VPN management on platforms like Palo Alto and Meraki., • Lead SSL/TLS certificate lifecycle management, ensuring proper issuance, renewal, and adherence to security best practices, including PKI/CA administration., • Troubleshoot and resolve complex connectivity and performance issues across WAN/LAN, fiber optics, and network security layers., • Collaborate with security teams to implement network segmentation, address vulnerabilities, and ensure compliance with security policies., • Oversee Windows Server environments (20122019), focusing on high availability, performance, and fault-tolerant architectures., • Administer Active Directory domains, including DNS, DHCP, Group Policy, and organizational unit (OU) management., • Maintain internal infrastructure requirements, including laptop and desktop computers, printers, phones, internet, and intranet., • Ensure reliable Domain Controller operation and replication across multiple sites., • Manage Windows Server clustering technologies for both file and SQL server clusters, ensuring critical services remain available., • Administer Hybrid Exchange environments, including mail flow, security policies, and mailbox management., • Implement and manage tools for patch management, ensuring security and system compliance., • Lead backup and disaster recovery strategies using Veeam, ensuring all critical data is secured and recoverable., • Assist the help desk and other teams with troubleshooting to identify root cause and provide technical support when needed. Qualifications • Scripting and automation knowledge with PowerShell, Python, or SQL required., • Experience with MDM and application deployment tools such as MS Intune, PDQ or Kaseya required., • Experience with legal and document management systems like iManage, Relativity, or Aderant preferred., • Certifications such as CCNA, CCIE, or CISSP preferred., • Bachelor's degree in computer science/engineering or equivalent education required., • Minimum 5 years of experience as a systems administrator/engineer. Position: Exempt Location: Century City. 5 days onsite for the first 90 days, then 3 days per week onsite, 2 days remote thereafter. Salary: $135k -$150k base Internal Privacy Policy