Trabajos van driving en DoncasterCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Barnsley / Doncaster cluster, covering areas like Barnsley, Doncaster, Mexborough, Conisbrough, Thorne, Askern, Bentley, Goldthorpe, Wath‑upon‑Dearne. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

An excellent opportunity for an experienced Air Conditioning Engineer to join a well-established company.Job Type: Full-Time, Permanent.Salary: £16.00 - £21.00 Per Hour, Depending on Experience.Location: Doncaster DN4.About The Company:Established in 2016, with foundations in building services, helping nationwide clients deliver projects from the design stage through to project completion.They are seeking a reliable engineer with proven experience installing, servicing, and maintaining VRF and split air conditioning systems. The ideal candidate will take real pride in their workmanship, deliver high standards on every job, and provide excellent customer service.Key Duties:Installation of VRF and split air conditioning systemsService, maintenance, and fault findingDiagnosing and repairing system issues efficientlyEnsuring all work is completed to a high professional standardWorking independently and as part of a teamTravelling to customer sites across the UK as requiredCandidate Requirements:Proven experience with VRF and split systemsStrong fault-finding and maintenance skillsPositive attitude and strong work ethicPride in delivering quality workmanshipFull UK driving licenceF-Gas certification preferredCompany Benefits:Competitive salary based on experienceCompany van suppliedOpportunities for overtime and working away allowancesOngoing training and career developmentA young, motivated, and growing company with excellent opportunities to grow and progress within the businessSupportive and professional working environmentCompany eventsOn-site parkingSick payIf you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration.The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.TPBN1_UKTJ

We are expanding our Aftersales capability with the launch of a brand-new Mobile Diagnostic Triage Van, dedicated to supporting our Renault customers across South Yorkshire. We are now seeking a highly skilled and customer-focused Mobile Renault Technician to join our team.This is a standout opportunity for a qualified Renault specialist who enjoys autonomy, variety, and the ability to make a real impact across multiple centres.For this role, we are offering a highly competitive annual salary of up to £50,000. You will also enjoy excellent benefits!Here at Stoneacre we are all driven by the same thing: passion. Passion that comes from our shared mission to make mobility sustainable and accessible to all.We have a can-do culture where we strive to deliver and support each other. We encourage employees to challenge the status quo and bring their whole selves to work.Joining us, we are committed to fulfilling your career ambitions. We offer fantastic opportunities for you to enjoy a diverse and successful career.Do we have your interest…?Here at Stoneacre, we are committed to creating a diverse and inclusive workplace. It is our ambition to make Stoneacre the best place to work because we recognise that it is our people that makes us a success. So, what is in it for you?- A flexible approach to working patterns - Choose your own hours! We are happy to discuss all flexible working options to help you achieve the work life balance that suits you- Industry leading competitive salary- Industry leading top-level bonuses- Dedicated manufacturer training- Fast track to EV Level 4- Minimum 30 days holiday increasing to 34 days (pro rata basis)- Industry leading career progression opportunities- Contributory workplace pension scheme- Uniform provided- Long service reward- Customer introduced reward- Employee discounts- Access to discounts on retailers, restaurants, holidays and much more- Wellness programme- Free parkingAn average day as a Motor Vehicle Technician…- Operate from our newly equipped Mobile Diagnostic Triage Van- Attend customer locations and Stoneacre sites across Chesterfield, Sheffield and Doncaster- Carry out diagnostic triage, fault finding, minor repairs and technical assessments- Support workshop teams with complex diagnostic cases- Ensure full compliance with Renault warranty processes and technical standards- Deliver a customer first experience aligned with Renault and Stoneacre expectations- Maintain accurate reporting and high-quality workmanshipAbout you…- Renault qualified Vehicle Technician (essential)- As a minimum, you will be qualified to Level 2 NVQ, or equivalent, in Vehicle Maintenance and Repair- You will have fantastic communication skills and thrive working in a challenging yet rewarding environment- You will have the ability to work well under pressure - It will be your technical ability that will help you overcome any challenge that is thrown your way.- An Electric and Hybrid vehicle qualification or certification would be advantageous but not essential as full training will be provided- MOT Licence would also be beneficial but not essential- Hold a full UK driving licence- We want you to love what you do – The rest will come naturally.“Stoneacre Motor Group are an Equal Opportunity employer committed to diversity in the workplace. We pride ourselves on creating an inclusive work environment where our employees can thrive by being themselves."TPBN1_UKTJ

Looking for a fast-paced role in the motor factor? Become a Parts Advisor at Doncaster and support the team driving The Power to Supply, making us the customers’ natural choice. What We Offer: Competitive salary (DOE) Monthly & yearly sales bonuses Monthly & yearly incentives 20 days holiday + bank holidays (increasing with service) Use of a company van to commute to & from work may be available (subject to managers discretion) What You’ll Do: Serve customers on the front counter and handle inbound calls Build strong relationships with retail and trade customers Promote offers and maximise sales opportunities Ensure accurate ordering to minimise returns Support warehouse duties when required What We’re Looking For: Experience as a Parts Advisor or within the motor trade (preferred) Good knowledge of cars or willingness to learn Sales-driven with excellent customer service skills Strong communication and organisation in a fast-paced environment Knowledge of the local areas and customer base would be a distinct advantage. Please note: We reserve the right to close this job advert early if the position is filled or we receive a high volume of applications. Apply as soon as possible to avoid missing out. Motor Parts Direct has established an enviable reputation for quality and reliability, whilst at the same time meeting all targets for successful growth. Our teams across the company network make us who we are and enable us to provide a service level beyond customer expectations. Our customers have a choice, and we aim to be that ‘natural choice’. Motor Parts Direct has been acquired by Motus. A diversified (non-manufacturing) business in the automotive sector with unrivalled scale and scope in South Africa, and a selected international presence, primarily in the United Kingdom and Australia and a limited presence in South East Asia, and Southern and East Africa. Motus Group (UK) Ltd. encompasses the UK's largest independent commercial vehicle dealer group and, with its passenger vehicle interests included, ranks inside from the Top 15 of all UK automotive dealer groups. The company has annual revenues of over £1 billion and employs almost 3000 people across its operations

Andy File Associates Limited are working as a recruitment agency on behalf of our client with regards this permanent vacancy. This is an exciting chance to join a thriving business in Doncaster. Our client has experienced rapid growth, expanding to new premises and taking on new members of staff over all departments. There are opportunities to join as a Vehicle Conversion Fitter. Join an ever growing company with great career prospects. A four day week can provide you with a fantastic work life balance. This role will cover all duties in the vehicle conversion department. You will have the chance to join a talented team that supports our client in being one of the UK’s leading vehicle conversion specialists. We are looking for experienced van and chassis conversion fitters and technicians and you will need to be flexible, professional, have a keen eye for detail and to produce a high level of workmanship. Experienced fitters to be able to work in the below areas: Conversion of chassis vehicles – beds, tippers, box vans and more Have the basic tooling and be able to use hand and power tools Internal panelling Fit roofing accessories Internal racking installation Towbars Electrical to point of termination or full electrical Welfare vehicle installations from start to finish Seating This role will be specialising in panel vans and you would have to demonstrate competency in your area. Salary – Is negotiable depending on experience. Good earning potential available as there are higher rates for multi skilled workers (can cover other areas/jobs). If you are an experienced fitter or are multi-skilled and are able to fit out a vehicle virtually straight away you will be rewarded with the higher pay grade which is depending on experience and goes from £13.45 up to £15.24 per hour. Full-time – (40 hours per week - 10 hours per day Monday to Thursday 6.30am to 5.00pm). Additional requirements Flexible Professional Attention to detail Be able to work as a team and confident to work on your own initiative Dedication Driving licence (not essential) Pay: from £13.45 per hour - Annual Salary £27,976 Up to £15.24 per hour - Annual Salary £31,699 (with electrics experience). Job Types: Full-time, Permanent Benefits: Additional leave Free parking Health & wellbeing programme * On-site parking

1 x Lead Fire Damper & Passive Fire Engineer £40,000–£45,000 + door-to-door travel pay 🔥 2 x Assistant Engineers £25,000–£30,000 The work will include: ✅ Fire damper inspection, testing and remedial works ✅ Passive fire protection and compartmentation works ✅ Fire stopping and sealing service penetrations ✅ Identifying faults and areas of non-compliance ✅ Completing photographs, reports and compliance evidence ✅ Working across commercial, residential and public-sector sites 🔥Lead Engineer: Previous fire damper or passive fire protection experience required Responsible for leading jobs and supporting assistant engineers Must be confident dealing with clients and taking ownership on site 🔥Assistant Engineers: Previous experience is ideal but not essential Full training and development provided Practical, reliable candidates with construction, maintenance or site experience are encouraged to apply CSCS card required, or willingness to obtain one A full UK driving licence and flexibility to travel are important for all positions. These are excellent opportunities to join a great and growing fire safety business and develop a long-term career within fire dampers and passive fire protection. Location: Doncaster / Mobile Role Job Type: Full-time, Permanent Hours: Monday to Friday, 08:00 – 17:00 Working Week: 42.5 hours Salary: £40,000 - £45,000 + Door-to-door pay + benefits Fire Door Remedial Engineer – Doncaster Are you an experienced Fire Door Remedial Engineer, Fire Door Carpenter, Joiner, or Passive Fire Protection Engineer looking for a full-time, permanent role? We are recruiting for a skilled Fire Door Remedial Engineer to carry out inspections, repairs, maintenance and remedial works across a range of commercial, residential and public sector sites throughout the South East. This is a hands-on mobile role where you will be responsible for ensuring fire doors are safe, compliant and maintained to a high standard in line with current UK fire safety regulations and industry best practice. The Role As a Fire Door Remedial Engineer, you will carry out fire door inspections, identify remedial requirements and complete the necessary repair works to ensure compliance. You will work across multiple sites, liaising with clients, site managers and compliance teams while completing accurate reports and maintaining high standards of workmanship. Key Responsibilities Carry out fire door inspections and assess condition, compliance and remedial requirements. Complete fire door remedial works including adjustments, repairs and replacements. Adjust or replace hinges, closers, locks, seals and ironmongery. Repair or replace damaged door leaves, frames and glazing. Install and maintain intumescent strips and cold smoke seals. Ensure all works are completed in line with UK fire safety regulations, BS 8214:2016 and industry best practice. Complete daily service reports, compliance paperwork and job records. Identify non-compliance issues and recommend suitable corrective action. Liaise professionally with clients, site managers and internal teams. Follow site health and safety procedures and maintain safe working practices. Wear correct PPE and maintain a professional appearance on site. What We’re Looking For Experience working with fire doors, fire door remedials, joinery, carpentry, maintenance or passive fire protection. Good practical knowledge of fire door components, including closers, hinges, locks, seals and frames. Strong attention to detail and the ability to work to compliance standards. Ability to complete reports and paperwork accurately. Good communication skills and a professional approach with clients. Reliable, organised and able to manage work across multiple sites. Full UK driving licence. Benefits Full-time, permanent position. Monday to Friday working hours. Mobile role covering the South East. Competitive salary. Company van Fuel card PPE and uniform provided Ongoing training and development. Opportunity to build a long-term career within fire safety and compliance. Apply Today This is a great opportunity for an experienced Fire Door Remedial Engineer or someone with a strong background in joinery, carpentry, passive fire protection or fire door repairs. Apply today with your CV and we will be in touch to discuss the role in more detail. Experience: Damper remedial: 2 years (preferred) Language: English (required) Licence/Certification: Drivers Licence (required) Work authorisation: United Kingdom (required) 📍 Location: Doncaster / Mobile + door to door pay 📄 Full-time, permanent positions

Dual Fuel Smart Meter Engineer Excellent rates • Pre‑booked jobs • Immediate starts We’re hiring experienced Dual Fuel Smart Meter Engineers for domestic installs. What you get 4.5–5 jobs per day £110 Dual / £60 Single 10‑day paid induction (hotel meals) Parts & consumables via local ByBox Van hire available (£200/week) Recommend‑a‑friend bonus up to £500The role Mon–Fri, 8am–5pm Call‑out 1 week in 6 Extra in‑day work availableRequirements Smart Metering qualification MOCOPA CMA1 or CCN1 MET1 Full UK driving licence Clean DBSPayment options CIS via approved Umbrella (TJW/Sapphire) Limited CompanyInterested? Call (phone number removed) to arrange a short Teams interview

VacancyField TechnicianLocation: APC DoncasterBusiness: APC is a global leader in the manufacture and sales of blood-derived functional plasma proteins and red blood cells. Our ingredients are used in animal diets, agronomy, and other industries to add value through the unique properties that positively impact billions of animals, and plants, each year. Today APC employs 500+ people in 8 countries with 17 manufacturing facilities worldwide.APC (GB) Ltd is a manufacturer of pet food ingredients and is a joint venture between the SARIA and LGI Group, America. This is a small but highly motivated operation based in Doncaster and is supplying ingredients to the main pet food Companies in the UK and distribute all over the world.The PositionAn exciting opening has arisen for a Field Technician to join our team at our APC Doncaster site. This is a great opportunity for someone who wants to join an established and growing company, that is committed to helping conserve natural resources and protect the environment. In return we will offer you the opportunity to develop your existing skillset by investing in your training and future development in order to progress you to the next level and fulfil your potential.This is a full-time, permanent position, working 45 hours per week, working Monday to Friday. The position does involve travelling (UK wide) and occasional overnight stays will be required.As a Field Technician your duties and responsibilities will vary based on business requirements but will include:- To visit abattoirs throughout the UK, maintaining various systems and equipment, ensuring the company is informed of any issues that may arise in a timely manner.- Involvement in the installations of abattoirs.- Dismantling components and equipment and assembling mechanical components.- Diagnose faults on the equipment used.- To become an integral part of the team of APC technicians and ensure product quality is achieved.- Ensure thorough investigation and corrective actions are conducted at site for all complaints and ensure these are reported accordingly.- To ensure both APC and suppliers are kept up to date with any issues highlighted internally or externally.- To work away occasionally (including overnight stays) and work on other sites ensuring all H&S requirements are fulfilled.- Any other ad hoc duties as requested by the Management Team.The Person- Candidates must hold a full UK Driving Licence.- Must have a minimum grade C in GCSE Maths, English, Science, or equivalent.- Previous mechanical / engineering experience within a continuous process / manufacturing environment.- Experience and knowledge of TIG welding and diaphragm pumps would be essential.- Have a high regard for safety, quality, and compliance.- Be accurate and have a great attention to detail.- You must be a proactive and motivated individual.- Be able to work on your own or as part of a team.- Be an effective communicator both written and verbally.Salary: Competitive Salary and Benefits, plus Company van* Please note that only shortlisted applicants will be contacted due to the high volume of CV's being received.TPBN1_UKTJ

Business Developer UK Are you someone who loves connecting with people, discovering opportunities, and making things happen? We’re looking for a curious, energetic Business Developer to help us grow in the UK. At IXON, we connect machines with their builders. We are at the forefront of revolutionising the way machines are connected, monitored and controlled. By providing an end-to-end solution, consisting of our in-house developed cloud platform and connectivity hardware, we empower machine builders with the tools and technology to stay future-proof and transform the way they do business. All with one goal: more efficient production with the lowest possible impact on the world. This is what energises you As Business Developer UK, you’ll be the driving force behind our local presence in the United Kingdom. While we already have a solid foundation, the potential is much higher. That is where you come in. It is your mission to be our customer's local go-to person to get the most out of IXON's solution. On a daily basis, you will be involved in the following activities: Managing and expanding the network of machine builders using IXON's solution. Strengthening relationships by understanding customer needs and clearly communicating IXON's proposition. Guiding customers through the purchasing process using "The Great Demo" method. Measuring deal success based on the number of New Customers and Gross New ARR. Inspiring customers and identifying possibilities for upsell. Working effectively with internal colleagues from Solution Engineering, Marketing, and Product Support. This makes you successful You are an entrepreneurial "hunter" who thrives on turning conversations into commercial success. You enjoy working independently but value being part of an international, fast-paced team. In addition, you identify with the following points: You have at least 2 years of experience in a B2B sales or business development role. You are able to establish strong personal connections with technical professionals. You have a technical background or experience in the machine building industry (highly preferred). You are based in the Midlands (the triangle between Birmingham, Manchester, and Nottingham). You are willing to travel to IXON HQ in the Netherlands for onboarding (1-2 weeks) and occasionally thereafter. Here’s what we offer you At IXON, you will join an international and dynamic environment, where you can make an immediate impact and grow rapidly. Together with your colleagues, you will contribute to the development of our innovative organisation. You get the opportunity to unlock your potential in a dynamic work environment where autonomy, a vibrant work culture, personal growth and meaningful contributions in industrial automation awaits you. Of course, we reward your dedication with a competitive salary and excellent secondary benefits. Ready to dive in? Start your journey and connect with IXON! Applying is quick and easy, just click the button below. Need more details? Reach out to our recruiter, Joey van Elsen, by calling +31628819109 or send an email to careers@ixon.cloud. Agency interest in this vacancy is not desired. Remote • Midlands, Derby, United KingdomSales Your application has been successfully submitted! _

Domestic Electric Vehicle Charging Point Installer/Domestic EV Installer/Electrician Leeds Exciting opportunity for you to broaden your skills and contribute to the green revolution. This is the perfect time to make the move into this forward thinking and fast-growing sector of the Electrical industry. We are working with the industry leader, with a vision to change the way people drive. They have made it their mission to install a charging point everywhere you park. To make that vision a reality we need the best talent in the industry - a vision Search Energy are proud to support. You will be responsible for installing and maintaining the network of EV Charging Points, in a localised area, while representing the company in a professional manner. Customer engagement and service are as important in this role as the technical skills to complete the installations. A keen attention and focus on Health and Safety is also paramount for our installers. What's in it for you? • Competitive basic salary of £37,300 - OTE £50,000+, • Annual £2000 bonus, • Overtime available, • Company hire van and fuel card, • 21 days annual leave plus 8 Bank Holiday days, • Employee Enhanced Benefits package EV Salary Sacrifice Car scheme Retail / Health / Gym and other services and discounts Help @ Hand Employee Assistance Programme - Wellbeing services and benefits • Workplace pension, • Full time employment What we are looking for in a candidate: • Be fully competent with completing electrical certificates using digital software, • An understanding of the current regulations and a focus to always remain compliant, • Able to follow safe working procedures., • Excellent customer services skills, with a friendly manner and effective communication skills. It is essential that the candidate has the following skills: • Level 3 electrical installations qualification, • Installation and termination of SWA cable, • BS 7671 :2018, 18th edition, • Minimum of 2 years Electrical Experience in domestic environment, • Full UK Driving Licence Ideally you will have: -Experience of 3 phase initial verification, inspection and testing • City and Guilds EV installation 2919 or equivalent. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.

An opportunity has arisen for a UPS Engineer to join is a specialist power solutions provider, delivering installation, servicing and maintenance of critical backup systems across a range of industries throughout the UK. As a UPS Engineer, you will be responsible for installing, maintaining and fault-finding on UPS systems across client sites, primarily in southern and central England. Location: Ideal candidates will be based anywhere between Oxford and the South of England, including counties such as Oxfordshire, Berkshire, Buckinghamshire, Hampshire, Surrey, West Sussex, East Sussex, Kent, Greater London, Wiltshire, Gloucestershire, Somerset, Middlesex You will be responsible for: • Attending client sites to carry out service, repair and fault diagnosis on UPS systems and associated equipment, • Supporting installations and commissioning of UPS and battery systems, • Performing battery impedance tests and replacements, • Conducting load bank testing, site surveys and standby power inspections, • Providing breakdown support and troubleshooting for critical electrical systems, • Supervising subcontractors and apprentices during on-site works, • Assisting the project and sales teams with technical input and resource estimates, • Documenting electrical test results and compliance paperwork What we are looking for: • Previously worked as a UPS Engineer, Field Service Engineer, Power Systems Engineer, Electrical Engineer, Critical Power Engineer, Uninterruptible Power Supply Engineer, Battery Systems Engineer, Service & Maintenance Engineer, Electrical Field Engineer, UPS Installation Engineer, Backup Power Engineer, Site Service Engineer, Commissioning Engineer, Emergency Power Engineer, Power Electronics Engineer, Electrician, • Proven experience of servicing and installing Uninterruptible Power Supply (UPS) systems, • 18th Edition or equivalent electrical qualification, • Willingness to travel nationally and stay overnight where required (expenses covered), • Valid CSCS or ECS card, • Full UK Driving Licence What’s on offer: • Competitive salary, • Door-to-door pay, • Overtime opportunities, • Flexible start and finish times,, • 25 days annual leave plus Bank Holidays, • Company van and fuel expenses, • Pension scheme, • On-site parking, • Ongoing training and development This is a fantastic opportunity for a UPS engineer to join a growing team in a rewarding, field-based engineering role. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.

Electrical Design Engineer - Renewable Energy (Solar PV) Location: Remote (UK-wide travel required) Salary: £50,000 - £60,000 per annum Employment Type: Full-time, Permanent A rapidly growing company in the renewable energy sector is seeking an experienced Electrical Design Engineer to join their team. This is an exciting opportunity to support the design and delivery of Solar PV systems across a wide range of commercial and industrial projects. This role is ideal for a qualified electrician or electrical engineer looking to move off the tools into a technical design-focused position, while still using their on-site expertise to drive quality and performance in sustainable infrastructure projects. Key Responsibilities Conduct on-site electrical surveys to assess suitability for solar PV installations Identify electrical defects or installation challenges and document findings clearly Prepare detailed electrical design documentation, bill of quantities, and scope of works Use design software such as Trimble or ElectricalOM to create accurate system layouts Liaise with technical teams to prioritise and coordinate survey activities Travel nationwide as required, using a company-provided van Compile and submit professional reports including photos, survey data, and recommendations Ensure designs comply with industry regulations and safety standards Requirements Strong background in electrical installations and regulations Experience with solar PV design and site assessment (commercial focus preferred) Qualified with: NVQ Level 3 18th Edition Wiring Regulations (BS 7671) AM2 Level 3 Testing & Inspection (C&G 2391, 2394/2395) Level 4 Design & Verification (C&G 2396 or EAL) - desirable Solar qualification (C&G, EAL, or BPEC) - advantageous Proficient in design software (e.g., Trimble, ElectricalOM) Excellent IT and report-writing skills Full UK driving licence (over 25 for insurance purposes) Self-motivated and organised, able to manage workload and travel independently Why Apply? This is a fantastic role for a qualified electrical professional ready to take the next step in their career, working at the forefront of the UK's clean energy transformation. Join a supportive team driving real environmental impact through cutting-edge design and engineering. Apply now to learn more about this opportunity in the fast-growing renewable energy space. Innotech Partners limited (12587274) acts as an Employment Agency and is a subsidiary of Talentia Group.

Service Engineer - Automotive Equipment £28-30k Basic + Bonus (typically upwards of £350 per month) + Company Van + Pension + Healthcare + Tax-free lunch allowance of £5 per day + Monday to Friday working Location: Field-based - Southern UK Ideal locations include Milton Keynes, Luton, Oxford, Banbury, Cheltenham, Gloucester, Reading, Swindon, High Wycombe, Slough, Newbury, Bath, Bristol, Chelmsford, Basildon, Colchester, Ashford, Maidstone, Tonbridge. Join a market-leading automotive equipment brand as a Service Engineer - enjoy premium training, a family-feel team, and the security of a global leader. An exciting opportunity has arisen for an experienced Service Engineer with knowledge of Mechanical, Electrical and Hydraulic engineering to join a market-leading and highly respected brand supplying premium capital equipment to the automotive sector. Renowned as the UK's number one in their field, this company boasts a long-standing team, a well-established client base, and a strong pipeline of future business. This is the ideal role for an experienced field-based service engineer who is comfortable in a customer facing role that requires you to think on your feet and actively solve problems. Whether you're from a bodyshop equipment or garage tools, or technical capital equipment background across agricultural, construction, off-highway, marine, mining and commercial vehicle…we'd love to hear from you! An absolute must for this role is the ability to travel throughout the South of England with overnight stays, flexibility is essential for this role. In return, you will be joining a Global business, the UK team has a family-feel where your contribution is genuinely valued. The Role: • Driving the servicing and calibration needs, installations and support of equipment through visiting customer's locations throughout Southern England., • Execute and develop service and sales needs and opportunities in the UK Market., • Product and solution demonstrations in cooperation with the Technical Sales Representative., • Installation of equipment and start-up training to deliver customer satisfaction., • Undertake service, warranty and calibration activities according to service bulletins and instructions., • Administration of service activities, update the CRM system and engage fully in regular internal meetings., • Actively work to increase the service, training and repair business potential at the customer's site. The Candidate: • Competent experience within mechanical and electronic and hydraulic engineering., • A proven background in a service engineer role, ideally this will be field based., • Our ideal candidate will have good technical knowledge of the collision repair industry and car manufacturing requirements; however, we are open to candidates that have a service background in allied sectors such as capital equipment, agricultural, construction, off-highway, marine, mining and commercial vehicle., • Sound understanding of health and safety requirements around the workplace., • Customer focussed and able to deliver on promises., • Hold a full UK driving license., • Personal situation that allows extensive travel within the UK. Personal Attributes: • Self-motivated, self-learner, driven by RCI (Rapid continuous improvement)., • Self-driven, with the ability to organise yourself to meet logistical challenges, efficiency needs, effective in time management and able to work to deadlines., • Good organisational skills., • Ability to represent the Brand in a positive way, according to our values and ethics., • First-class attention to detail with the desire to provide premium customer service. Apply in Confidence: To apply for this Service Representative (Mechanical, Electrical and Hydraulic) role, please send your CV to Kayleigh Bradley, Senior Recruiter at Glen Callum Associates Ltd. For a confidential chat, call Kayleigh directly on . Job Reference: 4288KB Service Engineer - Automotive Equipment

At Zego, we know that traditional motor insurance holds good drivers back. It’s too complicated, too expensive, and it doesn't take into account how well you actually drive. That’s why, since 2016, we’ve been on a mission to change all of that. Our mission at Zego is to offer the lowest priced insurance for good drivers. From van drivers and gig workers to everyday car drivers, our customers are our driving force — they’re at the heart of everything we do. We’ve sold tens of millions of policies so far, and raised over $200 million in funding. And we’re only just getting started. Overview of the Product Team Product Managers at Zego are change-makers. We build and scale data-driven, impactful solutions that enable Zego to offer competitive and personalised insurance. Working in a fast-paced Agile environment, our team thrives on innovation, cross-functional collaboration, and driving measurable outcomes. We’re building a product organisation where AI isn’t a buzzword - it’s how we work. From rapid prototyping with generative AI to using machine learning models that power our core pricing, our PMs operate at the frontier of what technology can do for insurance. From enhancing pricing models to streamlining digital experiences, our Product team is instrumental in shaping the future of insurance. About the Role We are looking for a Lead Product Manager who combines strategic depth with a hands-on builder’s instinct. You’ll own strategic workstreams that span multiple teams and business domains, defining the 6-12 month product direction and shaping how Zego’s products evolve to meet ambitious commercial targets. This role sits at the intersection of strategy, execution, and leadership. You’ll define new product mechanics and revenue models. You’ll make build-vs-buy-vs-partner recommendations that shape Zego’s competitive position. And you’ll champion an experiment-first culture - using AI to compress discovery cycles, generate sharper insights, and ship at a velocity that sets the standard for the rest of the organisation. You’ll work closely with Zego’s Leadership Team on strategic decisions, lead cross-functional programmes, and mentor Product Managers - raising the bar for how the entire product community operates. What You’ll Be Doing • Set strategic direction: Define strategy for the 6-12 month horizon. Shape product operating models and governance. Make build-vs-buy-vs-partner recommendations that directly influence Zego’s competitive position., • Define new product mechanics and revenue models: Identify and validate new revenue opportunities - from 0-to-1 propositions to upsell and retention loops. Ground every bet in unit economics and customer insight, not gut feel., • Architect an experiment-led culture: Embed rigorous experimentation (A/B testing, multivariate, rapid prototyping) into how your teams work. Replace opinion-driven roadmaps with a data-backed cadence where “rate of learning” is the leading metric., • Champion AI adoption across Product: Go beyond personal AI use - develop reusable AI playbooks, workflows, and assets that multiply the team’s output. Identify where AI tools can materially accelerate product development, content generation, data analysis, and decision-making across the organisation., • Lead with data at every level: Design the product metrics and dashboards used by the business. Be proficient in gathering and using financial, behavioural, and usage data to ground strategic decisions. You’re as comfortable in Snowflake as you are in a board-level strategy review., • Drive company-level initiatives with P&L impact: Own programmes that move core business metrics. Be accountable for commercial outcomes, not just feature delivery., • Lead cross-functional workstreams: Partner with engineering, data science, design, marketing, legal, and compliance to ensure your strategy is technically feasible, commercially viable, and delivered with velocity., • Mentor and develop PMs: Manage the product community of practice. Coach Product Managers across the organisation, instilling a customer-first, experiment-first mindset and raising the bar for data capabilities and product craft., • Engage with the Leadership Team: Present strategic recommendations, lead pivots and sunset decisions, and shape how Product is represented in company-wide decision-making.. What You’ll Need to Be Successful • Strategic product leadership: Significant experience leading product strategy across multiple teams or domains, ideally in a high-growth environment. You’ve defined product operating models, shaped governance, and made decisions that moved business-level metrics., • Experiment-first operator: Deep, hands-on experience designing rigorous experiments and rapid prototypes. You’ve built experiment cultures - not just run individual tests. You instil the “build-measure-learn” loop as the default operating rhythm for your teams., • Commercial and financial fluency: Deep understanding of unit economics, pricing levers, and revenue modelling. You prioritise based on expected commercial impact and can credibly partner with Finance and Leadership on P&L-level decisions., • AI as a force multiplier: You don’t just use AI tools yourself - you’ve built AI-enabled workflows, playbooks, or toolchains that made your team measurably faster. You can point to concrete examples of how AI has materially accelerated your or your team’s product development., • Data mastery: Proficient in gathering and using financial, behavioural, and usage data to make strategic decisions. You design the metrics and dashboards that the business relies on., • Technical depth: Comfortable engaging with engineers on system architecture, APIs, ML pipelines, and service design. You understand the technical trade-offs well enough to make informed strategic bets., • Outstanding communication and influence: You engage with the Leadership Team on strategic decisions, lead cross-functional workstreams, and bring stakeholders along through clarity and conviction - not hierarchy., • Builder mentality: You’re not just a strategist. You’re comfortable acting as an IC when needed, getting into the detail, and leading a squad directly when the situation calls for it., • People development: Proven track record of mentoring and developing PMs. You actively contribute to the broader product community, not just your own area. Our Toolkit We believe the tools don’t make the Product Manager, but the right stack helps us move with velocity: • Collaboration: Notion, Whimsical, Slack, Google Meet, • Design, Prototyping & User Testing: Figma, Figma Make, Maze, • Data & Analytics: Snowflake, Amplitude, Hotjar, Looker, • Thinking & Strategy: Claude Cowork, • Automations: Claude Code, Zapier What’s it like to work at Zego? Joining Zego is a career-defining move. People go further here, reaching their full potential to achieve extraordinary things. We’re spread throughout the UK and Europe, and united by our drive to get things done. We’re proud of our company and our culture – a friendly and inclusive space where we can lift each other up and celebrate our wins every day. Together, we’re setting the bar higher, delivering exceptional work that makes a difference. Our people are the most important part of our story, and everyone here plays a role. There’s loads of room to learn and grow, and you’ll get the freedom to steer your career wherever you want. You’ll work alongside a talented group who embrace each other's differences and aren’t afraid of a challenge. We recognise our achievements, learn from our mistakes, and help each other to be the best we can be. Together, we’re making insurance matter. How we work We believe that teams work better when they have time to collaborate and space to get things done. We call it Zego Hybrid. While some of our team choose to come into our central London office once a week, we’re flexible - some people prefer being in once a month or even quarterly. It’s all about finding the right balance between collaborative face time and focused home-working, so we can achieve great results while maintaining a healthy work-life balance. Our approach to AI We believe in the power of AI to meaningfully improve how we work - helping us move faster, think differently, and focus on what matters most. At Zego, we encourage people to stay curious and intentional about how AI is leveraged in their work and teams to drive practical impact every day. This is your chance to do the most meaningful work of your career - and we’ll provide you with the tools, support, and freedom to do it well. Benefits We reward our people well. Join us and you’ll get a market-competitive salary, private medical insurance, company share options, generous holiday allowance, and a whole lot of wellbeing benefits. We also offer an annual flexible hybrid working contribution, which you can use to support with your travel to the office or towards your own personal development. And that’s just for starters! There’s more to Zego than just a job - Check out our_ for insights, stories, and more. We’re an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, national origin, gender, sexual orientation, age, marital status, or disability status. #LI-IL1 #LI-Hybrid

Role: PLC Software Engineer Location: East/Central England (remote role with travel across the UK & Northern Ireland) Salary: Up to £55,000 depending on experience We are recruiting on behalf of a well-established MEICA specialist operating across the Water, Wastewater, and Power sectors. Since its foundation in 1999, this organisation has delivered turnkey engineering services from initial concept through to design, construction, installation, and maintenance. They are committed to becoming a world leader in water and power solutions, with a strong focus on quality and customer satisfaction. About the Role: This is a fantastic opportunity for a PLC Software Engineer to join a forward-thinking company where you'll be working on high-impact infrastructure and utility projects. You'll be instrumental in programming, commissioning, and delivering automation systems critical to environmental and energy networks. Key Responsibilities: • Program and develop PLC software (experience with Schneider, Allen Bradley, Mitsubishi, Siemens, or Omron desirable), • Design and implement logic/flow diagrams for system automation, • Troubleshoot, test and commission PLC systems both off-site and on-site, • Support the configuration and commissioning of automation/control devices, • Modify existing programs per client or site specifications, • Provide technical support to field teams and assist in improving automation processes, • Participate in the on-site commissioning of electrical and electronic systems What We’re Looking For: • Qualified in Electrical/Electronic Engineering, • Minimum 3 years’ experience in PLC programming, • Full UK driving licence, • Experience in the water or wastewater sector, • Familiarity with electrical control panels and process automation, • Experience with automation & process control equipment Benefits: • A company van & fuel card will be provided, • Laptop & mobile phone will be provided, • Private medical insurance, • Death in service x3 times annual salary, • Corporate events Apply now to be considered for this exciting role and help shape the future of automation- one project at a time!

An excellent opportunity for an experienced Air Conditioning Engineer to join a well-established company. Job Type: Full-Time, Permanent. Salary: £16.00 - £21.00 Per Hour, Depending on Experience. Location: Doncaster DN4. About The Company: Established in 2016, with foundations in building services, helping nationwide clients deliver projects from the design stage through to project completion. They are seeking a reliable engineer with proven experience installing, servicing, and maintaining VRF and split air conditioning systems. The ideal candidate will take real pride in their workmanship, deliver high standards on every job, and provide excellent customer service. Key Duties: Installation of VRF and split air conditioning systems Service, maintenance, and fault finding Diagnosing and repairing system issues efficiently Ensuring all work is completed to a high professional standard Working independently and as part of a team Travelling to customer sites across the UK as required Candidate Requirements: Proven experience with VRF and split systems Strong fault-finding and maintenance skills Positive attitude and strong work ethic Pride in delivering quality workmanship Full UK driving licence F-Gas certification preferred Company Benefits: Competitive salary based on experience Company van supplied * Opportu...

Tonne & Van Drivers to join our client based in Doncaster on a temp-to-perm basis.This is a varied driving role involving the operation of 7.Deliver delicate products to customers and construction sites.Ensure deliveries are completed accurately and on time.Carry out daily vehicle checks and report

Flexible People Ltd are currently recruiting for experienced and reliable 3.5T Van Drivers to join our client's busy delivery operation in and around Doncaster. This is a fantastic temp-to-perm opportunity for drivers who enjoy being on the road, providing excellent customer service, and working as part of a professional team. Location: Doncaster, DN6 8LS Salary: £13.00 per hour Job Type: Full-time, Temp to Perm Hours: Monday to Friday starting between 5 and 6 am No Weekends The Role - As a Multi-Drop Van Driver, you will be responsible for completing approximately 4050 deliveries per day to hospitality and business customers across Doncaster and the surrounding areas. Key Responsibilities • Safely operate a 3.5T van to complete daily multi-drop deliveries., • Load your vehicle each morning, ensuring goods are secure and handled with care., • Deliver orders to hospitality and business customers in a professional and timely manner., • Complete delivery paperwork and obtain customer signatures., • Provide excellent customer service on every delivery., • Keep the vehicle clean and roadworthy, reporting any defects promptly., • Ensure all deliveries are completed safely and within agreed timescales. Requirements • Full UK driving license with no mo...

7.5 TONNE DELIVERY DRIVER Join one of Doncaster's leading logistics operations and play a vital role in keeping deliveries moving across Yorkshire and surrounding areas! People Solutions are looking for reliable and hard working 7.5 Tonne Delivery Drivers to join our client's established delivery team. This is a fantastic opportunity to secure ongoing, full-time work with excellent earning potential, good hours, and genuine opportunities for long-term progression. This position is ideal for applicants looking for a role as a Van Driver , Truck Driver or Delivery Driver. Shift Pattern: Monday to Friday – 6:00AM Starts, Saturdays availability when required Pay Rate: £14.00 – £15.00 per hour Benefits Ongoing, long-term work with a respected logistics brand Weekly pay Full training provided Immediate starts available Employee well-being programme Supportive and professional working environment Day-to-Day Duties Safely operate a 7.5 Tonne vehicle to complete home deliveries Load and unload boxes and packages for onward delivery Load the vehicle for the following day's deliveries Conduct daily vehicle checks and report any defects or issues Ensure all loads are secured correctly and transported safely Maintain accurate delivery and compliance records Communicate effectively with depot and delivery teams Follow food hygiene and temperature control regulations when transporting food Essential Skills Valid UK Category C1 Licence Minimum 12 month's experience driving C1 vehicles Valid UK CPC Card and Digital Tachograph Card No more than six penalty points for minor offences (no IN, DR, DD, CD codes) Good communication and English language skills Reliable, punctual, and professional Understanding of traffic laws and road safety Must be able to pass a DBS background check Desirable Experience Previous commercial driving experience Experience delivering multi-drop or food-related goods Training Vehicle safety and compliance training provided Paid Induction on site prior to first shift Ongoing support and development throughout your assignment Apply Now: If you're ready to join a respected logistics team and enjoy guaranteed hours, great rates, and long-term stability, apply today by clicking the link below or contact our recruitment team for more information. People Solutions do not charge any of their candidates any fees or request deposits at any stage of the recruitment process. TPBN1_UKTJ

Delivers and collects goods, ensuring accurate paperwork completion.Requires a valid UK driver's license and experience.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). In-car coaching to build driving and teaching ability.

Self-employed Multi-Drop Van Drivers wanted. Access to a reliable long wheelbase van.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). In-car coaching to build driving and teaching ability.

A suitable vehicle and valid driving licence .

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). In-car coaching to build driving and teaching ability.

A suitable vehicle and valid driving licence .

Valid full driving license held for a minimum of 5 years due to commercial insurance requirements. No more than 6 points accepted for minor driving offenses; no DR10s. Documents Required: Valid Driving Licence, proof of address, Proof of national insurance and right to work in the UK documents.

We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). In-car coaching to build driving and teaching ability. Hold a full UK driving licence for at least .

At Hestia, we are guided by our core values and are dedicated to fostering an equitable, diverse, and inclusive organisation.Our mission is to empower individuals to rebuild their lives and achieve independence.Right now, we are looking for a Resettlement Worker to play a pivotal role in our Complex

Our 'Apollo' route planner creates efficient journeys to take the stress out of route planning Enjoy driving vehicles that are well maintained Theres more Generous Discounts: 30% off DFS and Sofology products for you, plus 15% for friends and family. Comply with all driving laws as defined by the

Employment Business, is currently recruiting.Class 1 (CE) Day & Night Container Drivers.Pay Rates (Holiday Pay Included).

Class 2 HGV Driver – No experience? No problem!.Ready to hit the road with us?.Are you ready to launch your career behind the wheel of a heavy goods vehicle? Whether you've just qualified or are looking for a fresh start, we're here to support you every step of the way.We're currently hiring Class

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). In-car coaching to build driving and teaching ability.

Why Join Evri This Summer? We continue to grow and as a Courier who is paid per delivery, your income grows with us! £250 bonus, after you have delivered your first 1,250 parcels* You can agree in advance your work package , a real job where you deliver in the same streets on the same days every

Staffline are recruiting HGV Class 1 drivers with immediate starts for our prestigious client's site based in Doncaster.Average earnings £927 (PAYE) per week, paid weekly!.Hourly pay £18 - £24 p/h (PAYE).Minimum 45hrs per week guaranteed.

What you’ll need - A suitable vehicle and valid driving licence - Appropriate insurance - A smartphone - A reliable and committed approach Ready to start? Click Apply on company site and complete the short application.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). In-car coaching to build driving and teaching ability.

Staffline are currently recruiting HGV Class 2 Drivers for our client based in Doncaster.Friday - Tuesday (5 shifts per week).AM: 05:00 - 06:00 (until finish).PM: 12:00 - 13:00 (until finish).

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expandin