Offres programming à BirminghamCréer des alertes d'emploi

TRAINEE CNC Programmer Trainer | £30k - £32k | AldridgeLocation: AldridgeSalary: £30,000 - £32,000 per year Starting SalaryJob Type: Full-time, Permanent | Trainee Position (Training Provided)Career Change Opportunity: Fund Your Future, Share Your SkillsAre you a time-served CNC Programmer ready to 'down tools' and transition your expertise into a rewarding training career? This is a highly sought-after trainee trainer / assessor position - we require your CNC Programming knowledge; we will provide ALL the training and qualifications needed for you to succeed as an trainer / assessor.STARTING SALARY: Begin earning up to £32,000 immediately.FULLY FUNDED TRAINING: All trainer and assessor qualifications will be provided and funded by the employer.PREMIUM BENEFITS: Excellent Company Benefits Package, Company Pension, Health Care, Life Insurance and Sick Pay.The Role: Coaching the Next GenerationYou will be involved in teaching, coaching, and mentoring young learners undertaking CNC qualificationsDelivery: Deliver and coordinate the successful completion of all aspects of CNC qualifications.Mentorship: Provide hands-on coaching and technical guidance to learners in the training centre.Focus: Training apprentices in line with relevant awarding body standards.Environment: Work in a rewarding, self-motivated team environment that values a 'hands-on approach.'Essential Requirements (Your Experience is Your Qualification)We are looking for proven occupational experience in as a CNC Programmer:Occupational Experience: Minimum 5 years' relevant occupational experience within CNC Programming.Technical Qualification: Mandatory Level 3 Engineering or Manufacturing related qualification .Soft Skills: Good communication, presentation skills, and the ability to adapt to a dynamic, rewarding environment.Compliance: This position is subject to Enhanced DBS clearance .Ready to launch a new, stable, and highly rewarding career? Apply today to transition your engineering skills!TPBN1_UKTJ

Job DescriptionSenior Quality EngineerPermanent UK-Based - West Midlands (Hybrid working)Eligible for SC ClearanceBuild quality in from the start. Lead by example. Deliver at scale.TXP is growing, and we’re creating a new Senior Quality Engineer role to strengthen quality engineering across our internal platforms and client delivery teams.This is a hands-on senior role for someone who loves building robust test automation, embedding quality into modern delivery pipelines, and coaching others to raise the bar. You’ll work across a variety of technology stacks, environments, and delivery models, with the opportunity to influence how quality is done across TXP.What you’ll be doingYou’ll work as part of agile, cross-functional teams (typically 4–8 engineers), delivering high-quality solutions through short, iterative release cycles. Your focus will be on quality engineering, not just testing.Key responsibilities include:\n\n • Designing and building test automation solutions from scratch\n, • Leading and supporting testing across automation, performance, security, and non-functional areas\n, • Performing detailed test analysis and test design for complex, highly integrated systems, including regulated environments\n, • Applying TDD, BDD, and risk-based testing approaches\n, • Supporting CI/CD pipelines and championing shift-left quality practices\n, • Delivering testing and assurance across all levels: \n \n, • Unit, Component, CIT\n, • System, Integration, End-to-End\n, • Non-Functional Testing\n, • Supporting UAT and BAT\n \n, • Analysing business requirements and defining effective testing strategies\n, • Managing test data, test artefacts, and testing collateral\n, • Collaborating closely with developers, including pair programming\n, • Coaching and mentoring less experienced testers and quality engineers\n, • Working in line with TXP’s technical, service, and quality standards\nWhat we’re looking forYou’ll be an experienced quality professional who is comfortable operating at senior level while remaining hands-on and delivery-focused.Experience we value:\n\n, • Leading and embedding testing best practice across delivery teams\n, • Defining testing policies, standards, and guidelines at enterprise scale\n, • Strong experience building and maintaining automated test frameworks\n, • Delivery within iterative/agile environments\n, • Working with Continuous Integration and CI/CD pipelines\n, • Managing priorities to meet delivery deadlines\nTechnical skills:\n\n, • Strong software testing and quality engineering expertise\n, • CI/CD pipelines\n, • Git / GitLab\n, • Excellent communication and coaching skills\n, • Stakeholder engagement and collaboration\nExperience with some of the following is highly desirable:\n\n, • JUnit, Playwright, Selenium, Cucumber\n, • Postman, Gatling, OWASP ZAP\n, • Docker / Kubernetes\n, • Azure and/or AWS\n, • Accessibility standards and tooling (WCAG, Wave, Axe)\nAbout you\n\n, • Passionate about quality and engineering excellence\n, • Comfortable working independently and as part of a team\n, • Highly organised with strong attention to detail\n, • Confident juggling multiple priorities\n, • Positive, driven, and pragmatic in your approach\n, • Open to travelling to customer sites when required to engage and present\nWhy join TXP?At TXP, quality is not an afterthought, it’s built in. You’ll have the opportunity to:\n\n, • Shape how quality engineering is done across the business\n, • Work on varied and meaningful projects\n, • Influence standards, tooling, and ways of working\n, • Grow your career in a collaborative, people-first consultancy\nBenefits: • 25 days annual leave (plus bank holidays). • An additional day of paid leave for your birthday (or Christmas eve). • Salary sacrifice, matched employer contributed pension (4%). • Life assurance (3x). • Access to an Employee Assistance Programme (EAP). • Private medical insurance through our partner Aviva. • Cycle to work scheme. • Corporate eye-care vouchers. • Access to an independent financial advisor. • 2 x social value days per year to give back to local communities.Grow with us:Work on exciting new projects.If you want to avoid getting stuck with the mundane, you’re in the right place. We work in many sectors with fantastic clients, so you’ll always be working on something exciting and challenging.Career growth – we’ve got you!We recognise that you might have a career path planned out and you might need some support to help you move forward. We’re here to support you and make the most out of your time with us, through challenging work, opportunities to grow and learning and development opportunities.Be part of the TXP growth journey.We are a high growth, fast paced environment. We currently have 200+ employees and work with clients across the UK. Joining TXP means you’ll be part of that.

Trainee AI Engineer - No Experience Needed! \n Ready to launch a future-proof career in AI - even if you have zero experience? \n We’re looking for ambitious individuals ready to break into the world of artificial intelligence and data science. Our industry-leading AI Traineeship is designed to take you from complete beginner to a highly employable Junior AI Engineer, with full training provided and a guaranteed job offer (£25K-£45K starting salary) within 20 miles of your location. \n Whether you're working full-time, part-time, or currently unemployed, our flexible, self-paced program allows you to train around your lifestyle and be job-ready in as little as 6-12 months. \n How it works - your journey to AI successStep 1: Discover AI \n Start your journey with our beginner-friendly mini-course bundle. Explore the fundamentals of AI through interactive videos, presentations, and quizzes - all accessible anytime, anywhere, through our easy-to-use online platform. \n Step 2: Full-Stack AI Mastery \n Dive deeper with in-demand technical skills including Python programming, data handling, machine learning, and version control with Git and GitHub. You’ll work on hands-on mini projects that mirror real-world challenges, helping you build confidence and a strong portfolio as you learn. \n Step 3: Get Certified \n Prepare for and earn your Microsoft AI-900: Azure AI Fundamentals certification, an internationally recognised qualification that proves your knowledge and boosts your credibility with employers. \n Step 4: Real-World Projects \n Showcase your new skills with two industry-based, practical projects assigned by your personal tutor. These projects are designed to give you real, portfolio-worthy experience, making you stand out to employers from day one. \n Your guaranteed future \n After completing your training, you'll be placed in a Junior AI Engineer role with a guaranteed starting salary of £25K-£45K. We work with top employers across the UK to ensure you get matched with a role close to home. \n We guarantee a job offer upon completion or 100% of your course fees refunded. \n We’re proud to have helped over 1,000 people each year transform their careers. Explore our success stories on our website and see what your future could look like. \n Ready to future-proof your career? \n If you’re passionate about tech and ready to break into one of the fastest-growing industries in the world, apply now. One of our friendly advisors will be in touch to guide you through the next steps.

Become part of a mission-driven digital team helping to build reliable, secure and scalable digital services that support economic growth across the UK. The Department for Business and Trade (DBT), in partnership with Inspire People, is seeking a Senior SRE Squad Lead with experience leading and developing engineers, strong DevOps and Site Reliability Engineering expertise, cloud platform experience, infrastructure-as-code capability and a passion for building resilient distributed systems. Based in London, Cardiff, Darlington, Edinburgh, Belfast, Birmingham or Salford, this permanent Grade 7 opportunity offers hybrid working, flexible working patterns and a salary of £63,824 to £80,158 (London £67,547 to £83,778,) depending on location and technical skills assessed at interview. \n Shape Reliable Digital Services at the Department for Business and Trade \n The Department for Business and Trade has a clear mission: to grow the economy by helping businesses invest, grow and export, creating jobs and opportunities across the UK. DBT's Digital, Data and Technology directorate develops and operates the tools and services that enable this mission. As a Senior SRE Squad Lead, you will play a key role in leading engineers while remaining hands-on in the design, delivery and continuous improvement of reliable, secure and scalable platform services that underpin critical digital products and services. \n As a Senior SRE Squad Lead you will: \n\n • Lead and support a team of Site Reliability Engineers, setting clear direction while fostering an inclusive, collaborative and high-performing team culture.\n, • Build strong working relationships with product, delivery and architecture colleagues to ensure platform services meet business and user needs.\n, • Provide technical leadership across DevOps and SRE practices, guiding teams to adopt approaches that support reliability, sustainability and continuous improvement.\n, • Coach, mentor and support engineers across DDaT, contributing to a supportive and diverse engineering community.\n, • Design, build and maintain reliable, secure and scalable cloud-based infrastructure using infrastructure-as-code approaches.\n, • Enable teams to develop effective observability practices, including monitoring, logging, metrics and alerting that support proactive service management.\n, • Work with teams to define and embed Service Level Indicators (SLIs), Service Level Objectives (SLOs) and error budgets in a pragmatic and user-focused way.\n, • Support the development and continual improvement of CI/CD pipelines to enable safe, frequent and low-risk delivery of changes.\n, • Oversee live service reliability, supporting teams through incident and problem management while encouraging a learning-focused, blameless culture.\n, • Ensure security, resilience and compliance considerations are understood and embedded into engineering practices.\n\n Essential skills for the Senior SRE Squad Lead include: \n\n • Experience leading, supporting and developing engineers, including line management or strong mentoring experience.\n, • Strong communication skills, with the ability to explain technical concepts clearly and build effective relationships with a range of stakeholders.\n, • Experience of working with cloud platforms such as AWS, Azure or Google Cloud, applying modern DevOps and SRE practices.\n, • Experience designing and delivering infrastructure-as-code solutions using tools such as Terraform, CloudFormation or similar.\n, • Ability to write clean, maintainable and well-tested code in at least one programming language.\n, • Experience designing, operating and improving distributed systems, with a focus on reliability, performance and user impact.\n\n In return, you can expect a flexible working culture, including: \n\n • Flexible hybrid working, typically 2-3 days per week in the office.\n, • Full-time, part-time and flexible working options.\n, • A Civil Service pension with an average employer contribution of 27%.\n, • Annual leave starting at 25 days, rising to 30 days with service.\n, • Three paid volunteering days every year.\n, • Learning and development tailored to your role.\n, • Access to professional qualifications, certifications and technical training.\n, • An inclusive culture that encourages learning, collaboration and continuous improvement.\n, • Employee benefits including cycle-to-work and wider Civil Service benefits\n\n Why Join DBT?This is an opportunity to combine technical leadership with hands-on engineering in a modern cloud environment. You'll work alongside experienced SRE and DevOps professionals, helping shape platform strategy, improve service reliability and support the delivery of critical digital services across government. \n The team is actively investing in observability, service-level management, platform automation, developer experience and cloud engineering. You'll join a culture that values collaboration, continuous learning and the freedom to explore new ideas, while making a tangible impact on services used across the Department for Business and Trade. \n This role requires SC clearance. DBT's requirement for SC clearance is to have been present in the UK for at least 3 of the last 5 years. Failure to meet this requirement will result in your application being rejected and your offer withdrawn. \n If you're an experienced Site Reliability Engineering leader who wants to remain close to technology while helping engineers thrive and delivering services that matter, apply today via Inspire People.

.NET Developer \n Hybrid in the Midlands (1 day per week in the office)£45,000 - £50,000 DOE \n This is an excellent opportunity to join a collaborative development team working on a range of business-critical applications, including logistics, CRM, EDI and integration platforms. You'll contribute to both the development of new solutions and the ongoing enhancement of existing systems, using modern Microsoft technologies across Azure and on-premises environments. The role is well suited to a developer who enjoys solving complex problems, embracing continuous learning and driving innovative, high-quality technical solutions. \n Key Responsibilities \n\n • Design, develop and maintain scalable .NET applications using C#.\n, • Build and integrate REST and SOAP APIs with internal and external systems.\n, • Develop cloud-based solutions within the Microsoft Azure ecosystem.\n, • Contribute to the modernisation and enhancement of existing applications.\n, • Work across the full software development lifecycle, including requirements gathering, design, development, testing and documentation.\n, • Troubleshoot and resolve issues within live production environments.\n, • Collaborate with developers and stakeholders to deliver high-quality technical solutions.\n, • Take ownership of features and contribute to continuous improvement across development practices.\n, • Utilise modern development tools, including AI-assisted technologies, to improve efficiency and code quality.\n\n Experience Required \n\n • Minimum 5 years' commercial experience developing with .NET/C#.\n, • Experience developing and supporting enterprise-level business applications.\n, • Experience building and integrating APIs with third-party systems.\n, • Commercial experience developing solutions within Microsoft Azure.\n, • Experience working across both cloud-hosted and on-premise environments.\n, • Experience using AI-assisted development tools (such as GitHub Copilot or similar) would be beneficial.\n, • Strong understanding of software engineering best practices and code quality.\n\n Essential Technical Skills \n\n • C# / .NET / .NET Framework\n, • REST & SOAP APIs\n, • Azure Functions & App Services\n, • Entity Framework\n, • Microsoft SQL Server & T-SQL\n, • Object-Oriented Programming (OOP)\n, • Software architecture and design patterns\n, • Git / Azure DevOps\n, • Dependency Injection\n, • Unit Testing & Mocking Frameworks\n, • Test Driven Development (TDD)\n, • Desirable Skills\n, • EDI and data integration experience.\n, • Enterprise integration and messaging platforms.\n, • Broader Azure services and cloud architecture.\n, • Experience using AI tools to improve development productivity and software quality.\n\n What's on Offer \n\n • Private healthcare.\n, • Company pension with matched contributions.\n, • Death in Service benefit.\n, • Employee Assistance Programme.\n, • Generous annual leave with additional leave linked to attendance.\n, • Ongoing training and career development.\n, • Supportive and collaborative working environment with regular team social events.\n

Help build and operate reliable, scalable and secure digital services that support businesses across the UK. The Department for Business and Trade (DBT), in partnership with Inspire People, is seeking a Senior Site Reliability Engineer with strong software engineering capability (either experience of Python development or a desire to develop Python expertise), experience building applications hosted on cloud platforms, expertise within a modern cloud engineering environment. and a passion for automation and continuous improvement. Based from London, Cardiff, Darlington, Edinburgh, Belfast, Birmingham or Salford, this permanent opportunity offers hybrid working, flexible working patterns and a National salary of £63,824 to £80,158 (£67,547 to £83,778 for London) plus 29% Pension and Civil Service Benefits. Salary awarded based on technical skills assessed at interview. \n Shape the Future of Cloud Engineering at DBT \n The Department for Business and Trade has a clear mission: to grow the economy by helping businesses invest, grow and export, creating jobs and opportunities across the UK. DBT's Digital, Data and Technology directorate develops and operates the digital platforms and services that support this mission. \n As a Senior Site Reliability Engineer, you'll join a highly skilled engineering team responsible for developing, operating and improving cloud-based platforms and services used across DBT and wider government. Working across Python development, cloud infrastructure, CI/CD pipelines, observability and automation, you'll help improve reliability, developer experience and service performance while supporting critical business services used by thousands of users. \n As a Senior Site Reliability Engineer you will: \n\n • Build and maintain shared service products enabling developers to work more efficiently.\n, • Write clean, maintainable and well-tested code to support platform and tooling development.\n, • Work closely with development teams to provide and improve platform tooling, including monitoring, logging, metrics, dashboards and CI/CD pipelines.\n, • Build, maintain and improve reliable, secure and scalable cloud-based infrastructure using infrastructure-as-code approaches.\n, • Support teams to adopt Site Reliability Engineering practices, including Service Level Indicators (SLIs), Service Level Objectives (SLOs) and error budgets.\n, • Contribute to observability across services, helping teams better understand performance, reliability and user impact.\n, • Develop and improve CI/CD pipelines to enable safe, frequent and low-risk delivery of changes.\n, • Collaborate with product, delivery and architecture colleagues to ensure platform services meet user and business needs.\n, • Support live service operations, including incident response, troubleshooting and problem management.\n, • Share knowledge and provide coaching and mentoring across the engineering community.\n, • Contribute to improving security, resilience and compliance practices within the platform.\n\n Essential skills for the Senior Site Reliability Engineer include: \n\n • Experience writing clean, maintainable code in at least one programming language.\n, • Experience designing, operating and improving distributed systems, with a focus on reliability, performance and user impact.\n, • Experience of building applications hosted on cloud platforms such as AWS, Azure or Google Cloud.\n, • Ability to build code-defined, reliable and well-tested infrastructure using tools such as Terraform, CloudFormation or similar.\n, • Knowledge of Linux/Unix fundamentals and TCP/IP networking.\n, • Strong communication skills, with the ability to build effective working relationships with both technical and non-technical stakeholders.\n\n In return, you can expect a flexible working culture, including: \n\n • Flexible, hybrid working with employees typically spending 2-3 days per week in the office.\n, • Offices located in London, Cardiff, Darlington, Edinburgh, Belfast, Birmingham and Salford.\n, • Full-time, part-time and flexible working options.\n, • A Civil Service pension with an average employer contribution of 28.97%.\n, • Annual leave starting at 25 days, rising to 30 days with service.\n, • Three paid volunteering days every year.\n, • Learning and development tailored to your role.\n, • Access to professional training, certifications and technical development opportunities.\n, • A culture encouraging inclusion, collaboration and continuous improvement.\n, • Employee benefits including cycle to work and wider Civil Service benefits.\n\n Why Join DBT? \n Join a highly collaborative engineering team where you'll work across software engineering, cloud infrastructure, automation and developer enablement. You'll have the opportunity to develop new skills, gain industry certifications and contribute to modern cloud engineering challenges that support services used across government. \n The team encourages experimentation, continuous learning and new ideas, giving engineers the freedom to improve services, solve complex problems and shape future platform capabilities. \n This role requires SC clearance. DBT's requirement for SC clearance is to have been present in the UK for at least 3 of the last 5 years. Failure to meet this requirement will result in your application being rejected and your offer withdrawn. \n If you're a software engineer, cloud engineer, DevOps engineer or Site Reliability Engineer looking to work on modern cloud platforms while building services that support businesses across the UK, apply today via Inspire People.

Trainee AI Engineer – No Experience Needed \n Future-proof your career in Artificial Intelligence – starting today. \n Looking for a career change? Currently employed but want something better? Or maybe you're between jobs and ready for a fresh start? ITOL Recruit's AI Traineeship is designed to get you into one of the fastest-growing industries with zero experience required. \n Train online at your own pace and land your first AI Engineer role in 1-3 months. \n Please note this is a training course and fees apply \n Job guaranteed - complete the programme and get a job or get your money back. \n Our candidates earn £28,000-£45,000. \n \n Why AI? \n AI is reshaping every industry you can think of. Healthcare, finance, retail, and manufacturing – they’re all scrambling for skilled professionals. \n The demand far outstrips supply, which means excellent salaries, flexible working arrangements, and genuine job security. \n \n How It Works \n Step 1 – AI Engineering Fundamentals \n Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. \n Step 2 – Data Fundamentals \n Understand the data workflow, from collection to cleaning, and learn how to prepare data for AI applications. \n Step 3 – Notebooks & IDEs \n Get hands-on with industry-standard tools like Jupyter Notebooks and VS Code to develop AI systems. \n Step 4 – Python Programming \n Master Python, covering everything from the basics to object-oriented programming (OOP). \n Step 5 – Python Streamlit Project \n Apply your Python skills by building a car price prediction app using Python and Streamlit. \n Step 6 – Python for Data \n Learn essential Python libraries like NumPy, Pandas, and Matplotlib for data manipulation and visualisation. \n Step 7 – AI Sentiment Analysis Project \n Work with Hugging Face to build a sentiment analysis classifier using real-world AI techniques. \n Step 8 – AI Prompt Engineering \n Master prompt engineering, learning how to craft effective prompts for controlling AI outputs. \n Step 9 – Retrieval-Augmented Generation (RAG) \n Learn how to integrate external knowledge into AI systems using RAG techniques and vector databases. \n Step 10 – AI Specialised Customer Service Chatbot Project \n Combine prompt engineering and RAG to build an AI-powered customer service chatbot, delivering intelligent responses using vector databases and knowledge bases. \n Step 11 – Machine Learning Fundamentals \n Understand machine learning principles and algorithms, and how to train and test models using scikit-learn. \n Step 12 – Machine Learning Project \n Put your machine learning knowledge into practice with a hands-on project. \n Step 13 – AI & Data Ethics \n Study the ethical considerations in AI, including issues of bias, fairness, and data privacy. \n Step 14 – Oral Exam \n Complete a virtual oral exam to assess your understanding and ability to apply your learning. \n Step 15 – AWS Certified Cloud Practitioner \n Finish with the AWS Certified Cloud Practitioner course and exam to gain essential cloud computing knowledge. \n \n What You Get \n · 100% online, self-paced training \n · Microsoft AI-900 certification included \n · 1-to-1 tutor and recruitment support \n · Real-world project experience \n · Job guarantee – get a job or your money back \n · Starting salary of £28,000–£45,000 \n \n We Get You Hired \n We're not new to this. ITOL Recruit has 15+ years of experience and has placed over 5,000 people into new roles. \n Our job programmes include certified tutors, UK-accredited qualifications, and one-on-one support from a recruitment adviser focused on placing you. \n We don't believe in empty promises. Complete our programme, follow the process, and if you don't land a job, you get your money back. \n "Five months from complete beginner to AI engineer. Best decision I ever made." – Jamie W., now working as a Junior AI Engineer in London \n \n Ready to Start? \n If you’re motivated, curious, and excited about technology, we’ll help you turn that into a career you can be proud of. \n Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps. \n

Industrial Software Engineer Scunthorpe - 3 Days Onsite and 2 Days Remote Following Probation £40,000 - £45,000 + Hybrid Working + BenefitsAre you a Software Engineer with strong C# and SQL skills looking to develop and support production-critical applications within a complex industrial manufacturing environment?This is an excellent opportunity to join a specialist engineering team responsible for developing and supporting systems that underpin large-scale manufacturing operations. Working within a diverse operational technology environment, you will be involved in application development, database management, system integration and operational support for business-critical platforms.You will play a key role in improving system reliability, data integrity and overall performance while contributing to the ongoing modernisation of legacy platforms. This is a varied position offering exposure to industrial systems, data platforms, process control technologies and business-critical applications.The ideal candidate will have strong commercial experience with C# development and SQL databases, alongside a proactive approach to troubleshooting and continuous improvement. Experience within a manufacturing, industrial or process-based environment would be advantageous. A basic understanding of PLCs or industrial control systems would also be beneficial, although direct PLC programming experience is not essential.In return, you will join a business investing heavily in technology and modernisation, offering long-term technical development, varied project work and the opportunity to influence future systems and architecture.The Role: Develop and support production-critical applications primarily using C# and SQL Troubleshoot systems and integrations across complex manufacturing operations Improve system reliability, data integrity and overall performance Support reporting and visualisation solutions including Grafana and Power BI Contribute to legacy system support and major modernisation projects Work alongside operational, process control and wider technical teamsThe Person: Strong commercial experience with C# development Good SQL experience Experience working with integrated systems and data flows Excellent troubleshooting and problem-solving skills Manufacturing, industrial or process environment experience desirable Basic understanding of PLCs or industrial control systems advantageous *Python and/or PHP experience beneficial but not essentialReference Number: BBBH277135 \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

If you are looking to progress a career in website administrator, then this training and placement programme is made for you? \n Skills shortages in the IT sector is driving the need for qualified, entry-level career seekers and career changers. \n All you need is a desire to work hard and invest some time and money in yourself to build the foundations for a new career. \n We help you start your career journey in programming by firstly ensuring you have the necessary industry recognised certifications and skills required to build a career. \n We ensure you market yourself properly through a structured career driven cv and LinkedIn profile highlighting your skills, any experience, and relevant transferable skills from other roles. \n Finally, our tutors will help you create a credible portfolio to demonstrate your skills and abilities to potential new employers. \n We have many years of experience in helping graduates find their first roles in top UK companies and organisations who need to employ entry-level qualified programming staff that can hit the ground running with up-to-date skills gained from this programme. \n The programme is specifically designed for individuals with none or limited experience but a real desire to start a career. Therefore, please do not apply if you are already an experienced programmer. \n Whether you are working full-time, part-time or are unemployed, this package has the flexibility to be completed at a pace that suits you and can be completed in as little as a few weeks or a few months (see steps 1 to 4 below). Study timings are approximate and assume you can study for a minimum 5 hours per week. *Training times will be reduced if you are able to invest more time each week. \n Stage 1 - Learn HTML and CSS (*up to 12 weeks) \n The first step is completing a selection of professional and industry-recognised courses. We have carefully selected these courses to give you the most out of both your learning and employment journey. \n\n • HTML Essentials (*up to 6 weeks)\n, • CSS Essentials (*up to weeks)\n\n Training is delivered through multimedia rich video tutorials, presentations and quizzes using an online portal enabling you to study online from anywhere you choose. You will also be assigned an expert tutor and a support mentor who will work with you 1-2-1 or in group sessions to provide additional training and support. \n Once the HTML & CSS courses are complete, your trainer will move you forward to the next stage. \n Stage 2 - Additional Online Training (*up to 12 weeks) \n The second step includes a selection of more advanced courses to get you up to speed for what is required and relevant for many entry level programming roles and help you get a step ahead. \n\n • Learn the Command Line (*1.5 weeks)\n, • Learn Git & GitHub (*1.5 weeks)\n, • Learn JavaScript (*1.5 weeks)\n\n\n, • Learn Python 3 (*1.5 weeks)\n\n JavaScript forms the foundation of almost everything you see on the Internet. Therefore, this is an essential addition language in building your programming and development foundation. \n Python is a highly versatile programming language and due to its relatively "easy to understand" commands now one of the most common programming languages used. You can use it for both small and complex tasks, and it is used across many different industries broadening your scope of opportunity. \n Step 3 - Building a Portfolio Website Project (1 week) \n Your tutor will provide you with some exercises and guidelines to help you build your own personalised portfolio. Having a strong portfolio to which demonstrates and showcases your range of skills and ability is essential within a programming career. \n In addition, we will now provide additional Study Courses for your continued development and broadening of your skills. Completion of these course is voluntary but recommended. \n\n • AWS Certified Cloud Practitioner\n, • Microsoft Certified: Azure Administrator Associate\n\n Step 4 - Entry Level Web Administrator placement \n We will now work with you to help you secure your first role in a role utilising your new skills in a coding, programming, or a web development role. Entry level roles typically start between £25K - £40k dependant on any prior knowledge or experience you may have. \n There are many entry level roles where your newly learned skills can be applied meaning a vast array of opportunities are now available to you. Examples of some of these are listed below: - \n\n • Junior Developer\n, • Website Administrator\n, • Website Support Developer\n, • Junior Web Developer\n, • Content Editor\n, • Wordpress Developer\n, • Junior Software Developer\n, • Junior Front or Back End Development\n, • Development Support\n\n We have been helping career changers and new career seekers gain new careers since 2009 and we are a CompTIA Platinum Partner, accredited by the BCS (Chartered Institute of IT/ British Computer Society) to ensure we provide the highest levels of training. We also have a 4.9 Trustpilot rating and numerous testimonials available on our website. \n Our money back Job Guarantee \n Due to our success and confidence in the results we deliver, and the skills shortage for entry-level coding staff we guarantee you will secure a job upon completion of your study programme, or we will refund you 100% of your course fees back. This is subject to our terms of learning/ terms of business. \n Qualification for this programme? \n To ensure we maintain a high level of support for our candidates, we limit spaces to this programme. \n Apply before the deadline and one of our consultants will speak with you to check your eligibility for the programme.

Trainee AI Engineer – No Experience Needed \n Future-proof your career in Artificial Intelligence – starting today. \n Looking for a career change? Currently employed but want something better? Or maybe you're between jobs and ready for a fresh start? ITOL Recruit's AI Traineeship is designed to get you into one of the fastest-growing industries with zero experience required. \n Train online at your own pace and land your first AI Engineer role in 1-3 months. \n Please note this is a training course and fees apply \n Job guaranteed - complete the programme and get a job or get your money back. \n Our candidates earn £28,000-£45,000. \n \n Why AI? \n AI is reshaping every industry you can think of. Healthcare, finance, retail, and manufacturing – they’re all scrambling for skilled professionals. \n The demand far outstrips supply, which means excellent salaries, flexible working arrangements, and genuine job security. \n \n How It Works \n Step 1 – AI Engineering Fundamentals \n Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. \n Step 2 – Data Fundamentals \n Understand the data workflow, from collection to cleaning, and learn how to prepare data for AI applications. \n Step 3 – Notebooks & IDEs \n Get hands-on with industry-standard tools like Jupyter Notebooks and VS Code to develop AI systems. \n Step 4 – Python Programming \n Master Python, covering everything from the basics to object-oriented programming (OOP). \n Step 5 – Python Streamlit Project \n Apply your Python skills by building a car price prediction app using Python and Streamlit. \n Step 6 – Python for Data \n Learn essential Python libraries like NumPy, Pandas, and Matplotlib for data manipulation and visualisation. \n Step 7 – AI Sentiment Analysis Project \n Work with Hugging Face to build a sentiment analysis classifier using real-world AI techniques. \n Step 8 – AI Prompt Engineering \n Master prompt engineering, learning how to craft effective prompts for controlling AI outputs. \n Step 9 – Retrieval-Augmented Generation (RAG) \n Learn how to integrate external knowledge into AI systems using RAG techniques and vector databases. \n Step 10 – AI Specialised Customer Service Chatbot Project \n Combine prompt engineering and RAG to build an AI-powered customer service chatbot, delivering intelligent responses using vector databases and knowledge bases. \n Step 11 – Machine Learning Fundamentals \n Understand machine learning principles and algorithms, and how to train and test models using scikit-learn. \n Step 12 – Machine Learning Project \n Put your machine learning knowledge into practice with a hands-on project. \n Step 13 – AI & Data Ethics \n Study the ethical considerations in AI, including issues of bias, fairness, and data privacy. \n Step 14 – Oral Exam \n Complete a virtual oral exam to assess your understanding and ability to apply your learning. \n Step 15 – AWS Certified Cloud Practitioner \n Finish with the AWS Certified Cloud Practitioner course and exam to gain essential cloud computing knowledge. \n \n What You Get \n · 100% online, self-paced training \n · Microsoft AI-900 certification included \n · 1-to-1 tutor and recruitment support \n · Real-world project experience \n · Job guarantee – get a job or your money back \n · Starting salary of £28,000–£45,000 \n \n We Get You Hired \n We're not new to this. ITOL Recruit has 15+ years of experience and has placed over 5,000 people into new roles. \n Our job programmes include certified tutors, UK-accredited qualifications, and one-on-one support from a recruitment adviser focused on placing you. \n We don't believe in empty promises. Complete our programme, follow the process, and if you don't land a job, you get your money back. \n "Five months from complete beginner to AI engineer. Best decision I ever made." – Jamie W., now working as a Junior AI Engineer in London \n \n Ready to Start? \n If you’re motivated, curious, and excited about technology, we’ll help you turn that into a career you can be proud of. \n Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps. \n

Are you looking to benefit from a new career in Software Development? \n Skills shortages in the IT sector is driving the need for qualified, entry-level career seekers and career changers. \n We help place graduates from this programme in top UK companies and organisations needing to employ entry-level software development staff that can hit the ground running with up-to-date skills gained from this programme. \n The best part is you will not need any previous experience as fully accredited training, which includes tutor support and mentoring, provides you with the skills, practical knowledge, and qualifications for you to secure a professional job and career in coding. You will also have the reassurance of a job guarantee (£25K-£40K) upon completion. \n Whether you are working full-time, part-time or are unemployed, this package has the flexibility to be completed at a pace that suits you and can be completed in a few weeks or a few months (step 1 to 4 below). Your job and career goals are completed in four simple steps. \n Step 1 -HTML and CSS Online Training (*12 weeks) \n The first step is completing a selection of professional and industry-recognised courses. We have carefully selected these courses to give you the most out of both your learning and employment journey. \n\n • HTML Essentials (6 weeks)\n, • CSS Essentials (6 weeks)\n\n The training is delivered via multimedia rich video tutorials, presentations, and quizzes through a portal that you study online from anywhere you choose. You will also be assigned an expert tutor and a support mentor to help you throughout your training. \n Once the HTML & CSS courses are complete, you will be ready to move forward. \n Step 2 -Online Training (*12 weeks) \n The second step includes a selection of more advanced courses to get you up to speed. \n\n • Learn the Command Line (1.5 weeks)\n, • Learn Git & GitHub (1.5 weeks)\n, • Learn JavaScript (1.5 weeks)\n, • Learn Python 3 (1.5 weeks)\n\n JavaScript forms the foundation of almost everything you see on the Internet, so it will be essential! Python is highly versatile. You can use it for both small and complex tasks, and it is used across many different industries. \n Step 3 - Build a Portfolio Website Project (1 week) \n Additional Courses \n\n • AWS Certified Cloud Practitioner\n, • Microsoft Certified: Azure Administrator Associate\n\n Step 4 -Entry Level Development placement (£25K - £40k) \n We work with you to secure your first role in software development, website administration or programming, with a starting salary of anywhere between £25K - £40k. While working in your first role, we will release your second batch of training which is specifically designed to increase your development knowledge to help you develop your career further to become a software developer. \n We have been helping career changers and new career seekers gain new careers since 2009 and we are a CompTIA Gold Partner, accredited by the BCS (Chartered Institute of IT/ British Computer Society) to ensure we provide the highest levels of training. \n In addition, we are also ELCAS approved to help members of the Armed Forces, Service Leavers and Veterans gain rewarding careers in IT and Cybersecurity. \n Job Guarantee \n Due to the success of this programme and the skills shortage of entry-level development staff, we can guarantee you will secure a job upon completion of your study programme, or we will refund you 100% of your course fees back. This is subject to our terms of learning/ terms of business. \n Enthusiastic about starting a career in coding? Apply now and one of our friendly advisors will be in touch. \n Keywords: Website, Web Developer, Business Development, Website, Web Design, Front End, Back End, Full Stack, Computer Programmer, Computer Systems Engineer, Systems Analyst, Programmer Analyst, Database Administrator, Front-end Developer, Mobile App Developer, Software Developer, Data Scientist, Cloud Engineer.

\n Overview\n Nexstar Media, Inc., America’s largest local broadcasting company, seeks a Vice President/General Manager to lead WIAT (CBS) in Birmingham, Alabama (DMA 45), including all digital, mobile, and social assets associated with the station. The GM will also serve as the station’s Director of Sales. \n Birmingham is a growing metro offering the feel of a big market with a close-knit community, a revitalized downtown, strong healthcare and university presence, and a recognized local culture. Responsibilities\n \n • Provide strategic leadership for WIAT, its digital assets, and related platforms across television, digital, mobile, and social channels.\n, • Lead operational and sales-driven teams with a focus on revenue growth, audience engagement, and content effectiveness.\n, • Develop and deploy locally originated content for OTT, linear, web, and social platforms to expand reach and engagement.\n, • Promote a culture of teamwork across all station departments, drive operational efficiencies, and support programming performance improvements.\n, • Engage with local community leaders and key clients to build long-term relationships and local revenue opportunities.\n, • Oversee administration of inventory, pricing, political sales processes, and revenue forecasting while ensuring strong collaboration with department heads.\n Qualifications\n \n, • Minimum five years of leadership experience at a commercial broadcast television station with accompanying digital assets.\n, • Proven track record in local broadcasting, digital service to the community, and strategic execution with demonstrated community involvement.\n, • Strong background in developing new business and revenue opportunities, including managing inventory, rates, political sales processes, and forecasting.\n, • History of managing high-performing sales and news teams and collaborating effectively with department heads and staff.\n, • Ability to engage local community leaders and develop lasting relationships with station clients.\n \n #J-18808-Ljbffr

Healthcare Architect Birmingham £35,000 – £55,000 DOE My client, an established architectural practice in Birmingham, is seeking a Healthcare Architect to join their growing team and contribute to the delivery of high-quality healthcare schemes. This is a fantastic opportunity for an Architect with strong technical expertise and healthcare sector experience to become part of a collaborative practice offering hybrid working, long-term progression, and involvement across a range of exciting projects. Key Responsibilities for this Healthcare Architect role: • Deliver healthcare projects through multiple RIBA stages from concept through to completion. • Produce detailed technical drawing packages and construction information. • Coordinate with consultants, contractors and project teams to ensure successful project delivery. • Attend site meetings and liaise with contractors throughout the construction phase. • Manage workloads, deadlines and contribute to project programming. • Support the development of healthcare schemes while ensuring compliance with relevant standards and requirements. • Work collaboratively with internal teams and external stakeholders to resolve technical challenges. Key Requirements for this Healthcare Architect role: • ARB registered Architect with a minimum of 3 years’ post-qualification experience. • Strong experience delivering healthcare projects within a UK architectural practice. • Proficient in Revit. • Confident working across multiple RIBA stages. • Strong technical detailing and coordination skills. • Experience producing construction information and technical drawing packages. • Good understanding of UK Building Regulations and healthcare design standards. • Strong communication and organisational skills. If this role is of interest, please apply below or contact Harley on or (phone number removed) for more information

\n We are currently recruiting for experienced Laser Operators/Setters/Programmers for various clients in and around the Sandwell & Dudley area. \n The role involves operating, setting and programming CNC laser cutting machines, ensuring quality output, and maintaining a safe working environment. \n Key Responsibilities: \n \n • Set up and operate CNC laser machines\n, • Read and work from technical drawings\n, • Perform basic m...\n \n \n\n \n ZIPC1_UKTJ

CNC Machinist (Fanuc/Architectural Hardware) Birmingham Up To £22 Per Hour + Early Finish Friday + 25 Days Holiday + Bank Holidays + Great Worklife Balance Are you a CNC Machinist or similar, with experience milling and turning, and preferably with experience using Fanuc controlled machines, looking for a day-based role, at a specialist manufacturer who makes specialist brass hardware for a variety of luxury industries? Do you want to work in a role where you will get to be a core part of the manufacturing process, making small batch and specialist components, at a company who value their employees through an early finish Friday and a generous holiday allowance, where you will get to work on a variety of projects for royal palaces, super yachts, castles, and luxury private residence? On offer is the chance to become a key member of a skillful manufacturing team, who are known for their specialist and luxury bespoke hardware, who supply into a varied client base across a variety of luxury settings, who value and champion their employees through a manageable working week with an early finish Friday. In this role you will be responsible for programming, setting, and operating CNC Millers and Turners, ranging from 3 to 5 axis machines. You will also be responsible for reading engineering and CAD models to manufacturer bespoke, brass hardware components. This role would suit a CNC Machinist or similar, with experience milling and turning, and preferably with experience using Fanuc controlled machined, looking for a role at a specialist manufacturer of brass hardware, who supplies a variety of high-end clients, with the added benefits of great work life balance and an early finish Friday. The Role Programming, setting, and operating CNC Millers and Turners Programming Millers and Turners using Fanuc controls Monday to Thursday 8am - 4:30pm, Friday 8am - 2pm, 38-hours per weekThe Person CNC Machinist with experience milling and turning CNC Machinist with experience using Fanuc controlled machines Commutable distance to BriminghamBBBH26205EW Key Words: CNC Programmer, CNC Machinist, Machinist, CNC, Programmer, Engineering, Engineer, Milling, Turning, Manufacturing, Manufacturer, Millers, Turners, Stourbridge, Dudley, Birmingham, Wolverhampton, Cradley Heath If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's Privacy Policy and Disclaimers which can be found on our website

Quality Inspector AS9100 Birmingham to £33,500 Our client has been established for more than 50 years and are recognised market leaders in the manufacture of low volume, high precision complex machined parts for a range of aerospace and automotive applications and are now seeking to recruit an enthusiastic and self-motivated Quality Inspector to complement their professional Quality team. Based in Birmingham and reporting to the Quality Manager, the successful candidate will be responsible for ensuring that manufactured products, materials, and processes comply with AS9100 aerospace quality management standards, customer specifications, engineering drawings, and regulatory requirements. The Quality Inspector role involves performing inspections, conducting audits, documenting quality results, and supporting continuous improvement initiatives to maintain the highest levels of product quality and compliance, with key responsibilities including (but not being limited to): Performing first article inspections (FAI) in accordance with AS9102 requirements. Inspecting incoming materials, in-process components, and finished products against engineering drawings, specifications, and customer requirements. Verifying compliance with AS9100 quality management system standards. Using precision measuring equipment such as calipers, micrometers, height gauges, CMMs, bore gauges, and other inspection tools. Reviewing and interpreting engineering drawings, GD&T (Geometric Dimensioning & Tolerancing), specifications, and quality plans. Completing inspection reports and maintaining accurate quality records. Identifying, documenting, and reporting non-conforming products and materials. Supporting root cause analysis and corrective action investigations. Participating in internal audits and support external customer and certification audits. Monitoring manufacturing processes to ensure compliance with quality standards. Verifying certifications, traceability records, and material documentation. Collaborating with production, engineering, and supply chain teams to resolve issues. Assisting in continuous improvement activities using Lean, Six Sigma, or similar methodologies. Ensuring compliance with aerospace, customer, regulatory, and safety requirements. To be considered for this varied and challenging Quality Inspector position it is envisaged the successful candidate will hold relevant Technical certification or equivalent experience and demonstrate at least 2 years or more experience of undertaking quality inspection within an aerospace, aviation, manufacturing, or precision engineering environment - essentially with a working knowledge of AS9100 Quality Management Systems and of conducting First Article Inspections (AS9102). With the ability to read and interpret engineering drawings and technical specifications and with a strong understanding of GD&T, as Quality Inspector you will have a high level of proficiency in using precision measuring equipment along with experience of non-conformance reporting and corrective action processes. You will also be a competent user of the MS Suite of packages and QMS, with the internal auditor certification AS9100 qualification proving distinctly advantageous, as will CMM operation and programming experience and knowledge of Lean / Six Sigma manufacturing methodologies. Contact the Quality Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Application Engineer\n Midlands, Commutable from Birmingham, Manchester, Leeds, Sheffield, Nottingham\n £40,000 - £50,000 (£60,000 OTE) + Company Vehicle + Door to Door\n\nAre you an experienced CNC Programmer, Applications Engineer or Manufacturing Engineer looking for a varied, customer-facing role where you'll work with advanced machining technology and support customers across the UK and Ireland?\n\nOn offer is an exciting opportunity to join a globally recognised engineering business where you'll receive specialist training, work with cutting-edge CNC machinery, and play a key role in supporting customers while developing your technical expertise.\n\nThis company is looking to expand its engineering team with a skilled Application Engineer who can provide technical support, optimise machining processes, and work alongside the sales team to deliver outstanding customer solutions.\n\nThe day-to-day of this role includes supporting customer installations, programming and optimising CNC machines, designing fixtures, machining sample parts, providing on-site technical support and training, and collaborating with the sales team on customer demonstrations and projects.\n\nThe ideal candidate will have experience with CNC programming and machining, be proficient with Siemens or Heidenhain controls, and have experience using CAM software such as Hypermill.\n\nThe role:\n Application Engineer\n Field-based role covering the UK & Ireland\n Supporting customer installations, programming and technical support\n Working closely with sales teams, fixture design and machining\n customer site travel\n\nThe person:\n CNC Programmer, Applications Engineer or Manufacturing Engineer\n Experience with Siemens and/or Heidenhain control systems\n Knowledge of CAM software (Hypermill or similar)\n Happy to travel across the UK & Ireland\n\nRise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.\n\nThe salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.\n\nWe are an equal opportunities company and welcome applications from all suitable candidates

Senior Engineer ·Ability to make clear and concise engineering decisions. This may at times be based upon limited information. ·An approachable individual that can work in isolation or as part of a wider team. ·Willingness to help other Department members when required. ·The ability to adapt communication style to suit the target audience. ·Good written and spoken communication skills. ·Ability to write clear and concise technical reports. ·Good time management and Client management skills. ·Managing and mentoring junior members of staff. ·The ability to manage a number of projects simultaneously. ·Project management of Civil Engineering schemes, taking full responsibility for all aspects including but not limited to: oObtaining full project brief from Client. oThe ability to undertake the role of Design Team Leader for major projects with high Civil Engineering content oProduction of fee proposal. oHealth and Safety / CDM requirements. oLiaison with all key stakeholders. oResource programming and management. oCo-ordination of other RL disciplines to provide a single point of contact / response where necessary. oTechnical approvals (where applicable). oTechnical specifications. oTechnical standards. oQA. oProject deadlines. oDelegation of work as required to other staff and checking of their work. oFinancial management (project spend / fee / profitability) and the ability to identify where additional fees may be required. oInvoicing. oDebt recovery (in conjunction with accounts). ·Good problem solving capabilities. ·Highly competent user of engineering software including AutoCAD, Civil 3D, MicroDrainage and XP Site. ·Robust knowledge of all relevant technical approval processes including Section 38 and 278 of the Highways Act and Section 104, 106 and 185 of the Water Industry Act. ·Good knowledge of Sewers for Adoption, Manual for Streets, Building Regulations, CIRIA 753 and the relevant sections of the Water Industry Act, Highway Act and DMRB. ·Keep up to date with industry changes including but not limited to changes in legislation, regulations, technical standards, innovative products and software updates. ·The ability to undertake design work at all stages, from concept / feasibility through detailed design to construction issue. ·The ability to design Primary Infrastructure. ·Understanding of ground conditions and the implications on Civil Engineering design. ·The ability to undertake ground modelling and cut / fill analysis for designs such as bulk earthworks and Section 278 surfacing. ·Ability to check own work before passing to a senior member of staff for approval. ·Good knowledge of Civil Engineering construction principles. ·Ability to prepare documentation for both planning submission and planning condition sign-off. ·Good knowledge of the planning process and an understanding of other parties involved. ·Clear understanding of CDM and how it applies to the role you undertake. ·Understanding of and ability to review and recommend for sign off Appointment Documents, Letters of Reliance and Warranty Documents. ·Maintain regular liaison with Clients to develop good working relationships. ·Understand Client needs and agree best value technical solutions to meet project challenges. ·Working with internal market leads to help promote and sell company services

LS(phone number removed)CNC CNC MILLING PROGRAMMER FANUC / HEIDENHAIN CONTROLS | DAYS ROLE | BIRMINGHAM £17.00 - £21.00 PER HOUR OVERTIME AVAILABLE PERMANENT POSITION Alecto Recruitment are proud to be working in partnership with a well-established precision engineering manufacturer based in Birmingham. Due to continued growth and a strong order book, our client is looking to recruit an experienced CNC Milling Programmer to join their skilled machining team. This is an excellent opportunity for a programmer seeking a long-term career within a modern manufacturing environment, producing high-quality precision components for a diverse range of industries. The successful candidate will play a key role within the machine shop, taking responsibility for programming, setting and operating CNC milling machinery whilst helping to drive quality, efficiency and continuous improvement. The Role Programming, setting and operating CNC Milling machines Creating and editing programs using FANUC controls Manufacturing precision-engineered components to tight tolerances Reading and interpreting complex engineering drawings Selecting appropriate tooling and machining strategies Conducting first-off inspections and ensuring quality standards are maintained Troubleshooting machining issues and implementing improvements Working closely with colleagues across production to maximise efficiency and outputCandidate Requirements Essential Proven experience as a CNC Milling Programmer Strong FANUC programming experience Ability to set and operate CNC milling machinery Experience manufacturing precision components to tight tolerances Ability to read and interpret engineering drawings Strong problem-solving skills and attention to detail Self-motivated with the ability to work independentlyDesirable Experience with 3-axis and/or 5-axis machining centres Knowledge of CAD/CAM software Apprentice trained or time-served engineer Experience within precision engineering, aerospace, automotive or subcontract machining environmentsPackage & Benefits £17.00 - £21.00 per hour depending on experience Permanent days position 37-hour working week Excellent overtime opportunities available Company pension scheme Performance bonus scheme 190 hours paid holiday On-site parking Modern machining environment with ongoing investment in equipment and technology Genuine opportunities for career progressionApply Today If you are an experienced CNC Milling Programmer looking for your next opportunity in Birmingham, we'd be delighted to hear from you. To apply for this role and find out more details, please forward your CV to: Lewis Smith Alecto Recruitment (url removed) (phone number removed) INDAV All applications and enquiries will be handled in the strictest confidence. Alecto Recruitment Limited is acting as an Employment Business in relation to this vacancy. We thank all applicants for their interest; however, only shortlisted candidates will be contacted

Electronics Engineer | Birmingham £48,000 - £60,000 | Home Based (Office Optional) Our client is a Birmingham-based innovator whose novel sensing technologies convert real-world physical data into meaningful, actionable intelligence. Their work underpins strategic decision-making for some of the biggest companies in the world, giving them the hard evidence they need to move with confidence. This is a business built on precision engineering and rigorous data, not guesswork. The Role They are looking for an Electronics Engineer with embedded software capability to join their R&D team. You'll work across circuit design, PCB layout, and firmware development, helping to build the next generation of sensing instrumentation from the ground up. Work However Suits You Best This is a genuinely flexible role. Home working is fully supported, and for most of the team it is essentially work from home, with the office there if and when you want it or need it. The only fixed requirement is a fortnightly R&D team meeting, usually a Friday morning, so you stay connected with the wider engineering group. Outside of that, how and where you work is largely up to you. Part-time applicants and flexible hours will also be considered. What You'll Be Doing Collaborating on electrical circuit design and PCB layout, with an eye on minimising manufacturing variance downstream Developing, debugging, and testing firmware for next-generation digital instrumentation Diagnosing and resolving hardware and codebase issues, supporting the wider test engineering effort Taking ownership of features and components within active project workstreams Maintaining clear technical documentation and working within an agile, sprint-based environmentWhat We're Looking For A background in electronics engineering with genuine embedded software experience, comfortable working across both hardware and firmware Confidence with PCB design and schematic capture tools such as Altium or KiCad Solid understanding of circuit design, PCB layout, and digital signal processing (DSP) Awareness of design for manufacture, including EMC, RoHS, and WEEE considerations Firmware or systems programming experience, ideally C and/or Verilog A methodical, detail-focused approach and the ability to manage your own workload independentlyGood to Have Experience designing to ATEX (IEC (phone number removed) or environmental testing (IEC (phone number removed) standards PLC programming experience, particularly Siemens S7 Familiarity with STM32 or Zynq SoCsIf you want the autonomy of a home-based role without losing the option of office collaboration when it matters, this is worth a conversation

Commissioning & Critical Power Support Manager Home-Based | Planned UK Travel | Compteitive Salary + Van + Benefits Are you a Senior Commissioning Engineer ready to step up, without spending weeks at a time living on customer sites? This is a newly created role with a global power generation OEM, as they grow their UK critical power projects division. You'll lead commissioning across complex diesel generator and critical power installations, and become the technical escalation point the wider engineering team turns to when projects get difficult. It's a progression opportunity: you'll combine hands-on commissioning with increasing responsibility for commissioning strategy, contractor oversight and project delivery, building and shaping the commissioning function as the business grows, rather than inheriting one. Why this role stands out Home-based with planned UK project travel: You'll oversee commissioning through site visits, remote coordination and technical support, not months away from home. Build it, don't inherit it: You'll influence over how commissioning standards and best practice develop across the division. Direct line to senior leadership: You'll work alongside the Managing Director, Project Managers and global engineering teams. Backed by a global manufacturer: Significant investment, a recently expanded 24,000 sq ft facility, and projects delivered up to 20MW. Mission-critical work: Data centres, healthcare, utilities and standby power across FM, NHS and wider critical infrastructure. What you'll be doing Leading commissioning activities across complex diesel generator and critical power projects, from Factory Acceptance Testing (FAT) through Site Acceptance Testing (SAT) to final customer handover. Configuring, programming and troubleshooting generator control systems, synchronisation and load sharing applications. Acting as the technical escalation point for complex controls, synchronisation and fault-finding issues. Coordinating commissioning engineers, subcontractors and dealer partners, ensuring work meets standards, health & safety and project requirements. Supporting and developing engineers, helping raise commissioning standards across the business. What we're looking for Proven experience commissioning diesel generator systems in critical power, standby power or large infrastructure environments. Strong knowledge of generator control systems, synchronisation, load sharing, ATS equipment and LV switchgear. Hands-on experience configuring and fault-finding generator controllers such as ComAp, DeepSea or similar platforms. Confidence diagnosing complex electrical, controls and commissioning issues across generator installations. Someone motivated to progress into technical and commissioning leadership while staying close to the engineering. The package: Compteitive Salary Vehicle or Company Van Pension (up to 5% Employer Contribution), Vitality Health Scheme, Company Credit Card * 25 days' Holiday + Bank Holidays (Rising with Service) If you're a commissioning engineer looking for your first move into leadership, or an experienced commissioning manager who wants ownership, autonomy and a life off the road - apply now or message Harriet at Renew Consultancy for a confidential conversation. commissioning engineer · commissioning manager · critical power · diesel generator · standby power · generator control systems · synchronisation · load sharing · ATS · LV switchgear · ComAp · DeepSea · FAT · SAT · data centre · power generation · fault-finding · commissioning management

Job Title: Quality Inspector Location: Birmingham, West Midlands Position Type: Full-Time, Permanent Salary: £18-19 P/H – DAYSHIFT £21-23 P/H AFTERNOON SHIFT About the Role Are you an experienced Quality Inspector with a keen eye for detail and a background in high-precision manufacturing? We are a leading advanced materials manufacturer specializing in technical and precision components. We are seeking a meticulous Quality Inspector to join our team in Birmingham. You will play a critical role in ensuring our high-performance components meet strict dimensional tolerances, aesthetic standards, and precise customer specifications before they leave our facility. Key Responsibilities No Programming of CMM’s but able to use one. Dimensional Inspection: Perform first-off, in-process, and final dimensional inspections of complex, high-tolerance components using CMM, optical comparators, micrometers, calipers, and gauges. Visual & Material Quality: Inspect technical ceramic parts for surface defects, micro-cracks, contamination, and structural integrity. Documentation & Traceability: Maintain accurate quality records, complete inspection reports, and generate Certificates of Conformity (CoC). Non-Conformance Management: Identify, log, and isolate non-conforming products (NCRs), working alongside production and engineering teams to assist with root-cause analysis (CAPA). Calibration Support: Assist in maintaining and managing the calibration schedule for shop-floor measuring equipment and tools. Process Improvement: Contribute to continuous improvement initiatives to enhance yield rates and quality control processes. Key Requirements & Qualifications Experience: Proven experience as a Quality Inspector in a high-precision engineering or manufacturing environment (ceramics, aerospace, medical devices, or precision machining preferred). Technical Drawing Literacy: Ability to interpret engineering drawings, standard geometric tolerances, and GD&T specifications. Metrology Equipment: Hands-on experience with standard measuring instruments (micrometers, height gauges) and CMM/optical measurement systems. Attention to Detail: Excellent visual acuity and high precision mindset given the technical nature of ceramic materials. Communication: Strong verbal and written communication skills for writing reports and working across departments. What We Offer Competitive salary based on experience Generous holiday allowance Company pension scheme Opportunities for training, development, and career advancement * Clean, modern high-tech manufacturing environment

We're recruiting on behalf of an innovative technology business developing cutting-edge industrial sensing technology used by manufacturers around the world. This is an exciting opportunity for an experienced Electronic Engineer to join a growing R&D team working on the next generation of intelligent sensor technology. You'll play a key role across the full product development lifecycle, from circuit design and PCB development through to embedded firmware, testing and product validation. Working within a collaborative engineering environment, you'll have the opportunity to contribute to genuinely innovative products while enjoying a high degree of autonomy and flexibility. You'll only need to attend the Birmingham office once a fortnight on a Friday for team meetings. What We're Looking For We're interested in engineers with commercial experience in areas such as: Analogue and digital electronics. PCB design and layout. Circuit design and simulation. Embedded firmware development. C programming. Digital Signal Processing (DSP). Design for manufacture. EMC awareness. Altium or KiCad. Experience with any of the following would also be advantageous: ATEX design. Environmental testing standards. Siemens S7 PLCs. STM32 microcontrollers. Xilinx Zynq devices. * Linux development

CNC Lathe Programmer / Setter Operator Required! \n Our client is an established manufacturing business, producing specialist metal components and assembly solutions to a range of industries. \n On behalf of our client, we are seeking an experienced CNC Lathe Programmer / Setter Operator to join the team. The successful candidate will be responsible for programming, setting, and operating CNC lathes to en... \n \n ZIPC1_UKTJ

Are you an experienced CNC Milling Machinist with expertise in Wire EDM,Sinker EDM and multi-axis milling? Do you enjoy producing complex, high-precision components to exacting standards? Looking for a role where your precision and craftsmanship are valued? We're looking for a skilled machinist to join our client's growing engineering team, manufacturing precision components for a range of specialist industries. If you take pride in producing quality work and enjoy working with modern machinery, we'd love to hear from you. The Role As a CNC Milling Machinist, you'll be responsible for programming, setting and operating a range of precision manufacturing equipment, ensuring components are produced accurately and efficiently while maintaining the highest quality standards. Benefits: Salary up to £34,000 DOE + Overtime available Location: Birmingham within the clean air zone Hours: Monday to Thursday 7:00am 4:00pm, Friday 7:00am 12:00pm Permanent role Free onsite parking Duties / Responsibilities Set up and operate 3, 4 & 5-axis CNC milling machines Programme, set and operate Wire EDM (Wire Erosion) and Sinker EDM (Spark Erosion) machines Manufacture precision components to tight tolerances and high-quality surface finishes Read and interpret engineering drawings, CAD models and technical specifications Select appropriate tooling, fixtures and machining methods Carry out in-process inspection using precision measuring equipment Perform routine machine maintenance and basic fault finding Work closely with colleagues to ensure production deadlines are achieved Maintain high standards of quality, safety and housekeeping Skills/Experience: Essential: Wire EDM / Wire Erosion Sinker EDM / Spark Erosion Multi-axis CNC milling Precision engineering and tight tolerance machining Reading engineering drawings and GD&T Using micrometers, verniers, gauges and other measuring equipmentDesirable Engineering apprenticeship or relevant machining qualification Experience within aerospace, tooling, mould, die or medical manufacturing Fusion 360 or similar CAD/CAM software Fanuc, Heidenhain or Siemens controls Apply Now If you're an experienced CNC Machinist looking for a new opportunity with a company that values quality workmanship and precision engineering, we'd love to hear from you. Apply today to be considered

Job Title: Electronic Engineer Location: Birmingham (one day onsite per fortnight) Salary: Up to £60K (DOE) We’re looking for an experienced Electronic Engineer to join a growing team developing innovative electronic products. This is an excellent opportunity to work across hardware design, embedded firmware and product development within a collaborative engineering environment. You’ll play a key role in the development of innovative electronic products within a supportive R&D environment, with exposure to hardware, firmware and product validation activities. The Role Supporting electrical circuit design and PCB layout improvements to optimise manufacturability. Developing, debugging and testing embedded firmware for digital electronic products. Investigating, resolving and documenting hardware and firmware issues. Supporting electrical testing, validation and performance improvements. Delivering small hardware or firmware features independently as part of wider development projects. Producing and maintaining technical documentation while contributing within an Agile/Scrum development environment. About You Previous experience designing PCBs for industrial electronic products. Strong background in electronic circuit design. Good understanding of PCB layout and design for manufacture. Knowledge of Digital Signal Processing (DSP). Knowledge of EMC best practices, RoHS and WEEE compliance. Experience with embedded or systems programming using C and Verilog. Experience using PCB design and schematic capture tools such as Altium or KiCad. Strong analytical and problem-solving skills with a systematic approach to root cause analysis. Able to work both independently and as part of a collaborative engineering team. Desirable Skills Experience designing to ATEX (IEC (phone number removed). Experience with IEC (phone number removed) environmental testing standards. PLC programming experience, particularly Siemens S7. Familiarity with STM32 microcontrollers and Zynq SoCs. Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV

Site Manager / General Foreman – Earthworks & Civil Engineering Permanent | West Midlands Are you an experienced Site Manager or General Foreman with a strong background in earthworks and civil engineering? We're working exclusively with a well-established, privately-owned civil engineering contractor to recruit an experienced operational leader for an upcoming earthworks scheme in the West Midlands. This is an excellent opportunity to join a business that has built an outstanding reputation for delivering technically challenging projects while genuinely investing in its people. The initial project is a manageable-sized earthworks scheme, making it an ideal opportunity for someone who enjoys being hands-on, leading from the front and taking ownership of site operations. The Role You'll be responsible for the day-to-day management of the site, ensuring works are delivered safely, efficiently and to the highest quality standards. Working closely with the Contracts Manager and commercial team, you'll oversee all operational aspects of the project from mobilisation through to completion. Key responsibilities will include: Managing earthworks operations including cut and fill activities. Material management, movement and control across site. Ensuring compliance with the earthworks specification, including placement, compaction and testing requirements. Coordinating subcontractors, plant and direct labour. Maintaining high standards of health, safety, environmental compliance and quality. Programming daily activities to ensure the project remains on schedule. Liaising with engineers, clients and the wider delivery team. About You We're keen to speak with candidates who have proven experience delivering earthworks and infrastructure projects. You'll ideally have: Previous experience as a Site Manager or General Foreman within civil engineering. Strong knowledge of earthworks, material management, testing and quality control. Experience delivering infrastructure or heavy civils projects. Excellent leadership and communication skills. SMSTS or SSSTS (depending on level), CSCS and First Aid. Please note: This role is not suited to candidates whose experience is predominantly within traditional housing groundworks. The projects delivered by our client are focused on wider civil engineering and infrastructure schemes rather than residential developer packages. The Company Our client is a respected civil engineering contractor with a diverse portfolio of work across the Midlands and beyond. Their projects include earthworks, ground regeneration, drainage, reinforced concrete structures, highways infrastructure, environmental improvement works, utilities, landscaping and wider civil engineering schemes. They have built a reputation for delivering quality projects through long-standing client relationships and repeat business. Unlike many larger contractors, this is a close-knit team where people are genuinely valued. Staff retention is excellent because the business offers autonomy, support and a collaborative working environment where everyone's contribution is recognised. What's on Offer? Permanent position with a secure and growing contractor. Competitive salary and benefits package. Long-term career development across a varied portfolio of civil engineering projects. Supportive management team with a genuine focus on employee wellbeing. * Opportunity to work on technically interesting schemes rather than repetitive housing developments. If you're looking for a long-term opportunity with a contractor that values quality, teamwork and its people, we'd love to hear from you. For further information on this opportunity please call Leigh or email your CV for details

At Fire Safe Services, we’re recruiting a Senior Commissioning Engineer to join our growing team. This role covers the servicing, maintenance, fault-finding, and repair of addressable and conventional fire alarm systems across a wide range of sites. You’ll act as a senior technical point of contact on site, providing leadership and mentoring junior engineers while delivering exceptional customer service. You’ll also take part in the out-of-hours on-call rota, supporting our 24/7 service commitments. The role is primarily based across the West Midlands, with occasional travel to surrounding areas. What you receive for joining us: We’re looking to offer a competitive salary depending on experience + overtime and call-out payments where applicable. In addition, we offer a bonus, a company vehicle, tools, laptop, phone, 25 days holiday plus bank holidays, your birthday off, company pension, and ongoing training and development opportunities to support your technical growth and career progression. Here’s a look at some of the things you’ll be doing: Carry out planned and reactive maintenance, servicing, fault diagnosis, repairs, full system testing, and cause & effect verification on addressable and conventional fire alarm systems, ensuring compliance with BS 5839 and integration with life safety systems including sprinklers, emergency lighting, and access control Respond to emergency call-outs as part of the on-call rota, delivering effective fault resolution while maintaining excellent customer service and accurately completing service reports, commissioning certificates, and compliance documentation Provide technical leadership on site by mentoring junior engineers, promoting best practice, supporting system upgrades, remedial works, audits, quotations, and ensuring work is completed safely and to the highest standards Liaise with clients, site managers, and contractors to manage service expectations, resolve technical issues, and ensure all work complies with fire safety legislation, health & safety requirements, and company procedures Can you show experience in some of these areas: At least 5 years' experience servicing, fault-finding, repairing, and commissioning addressable and conventional fire alarm systems, with strong knowledge of BS 5839, cause & effect programming, loop testing, panel configuration, and leading systems such as Gent, Notifier, Advanced, Kentec, Apollo, and Hochiki FIA Units 1–5 (or equivalent) with strong technical problem-solving skills, the ability to work independently on complex or high-profile sites, and confidence mentoring junior engineers while representing the company professionally Experience working with integrated life safety systems such as fire suppression, emergency lighting, access control, or BMS, together with manufacturer training and knowledge of commissioning software and laptop diagnostics would be advantageous Full UK driving licence required with flexibility to travel across the Midlands and surrounding areas, willingness to participate in the on-call rota, and ECS, CSCS, IPAF, PASMA, SSSTS, or similar health & safety qualifications considered advantageous Do you see yourself reflected in the description above? If so, we encourage you to submit your application today. Uncertain whether your skills align perfectly? Don't hesitate to apply regardless; we value candidates with diverse skill sets and will carefully consider all applicants. Introducing our organisation: Fire Safe Services is proud to be part of Complii. Complii is a leading integrated provider of safety and regulatory compliance services across our water, air, fire, electrical, and vertical transportation divisions, supporting organisations nationwide to operate safely, compliantly, and responsibly. This role offers the opportunity to lead one of our most strategically important divisions, shape the future of our Active Fire business, and play a key role in the continued growth and success of the Group

Location: Birmingham Contract Length: 6 Months (minimum) Rate: £60 p/h (Outside IR35) Start Date: ASAP An exciting opportunity has arisen for an experienced Control Systems Engineer to join a leading systems integration team delivering automation solutions in the energy sector. You'll be responsible for developing and commissioning Siemens based control systems, supporting projects from software development through to site commissioning. This is an ideal opportunity for an engineer who enjoys technically challenging projects and is comfortable working both remotely and on customer sites. Key Responsibilities: Design and develop PLC software using Siemens TIA Portal Configure Siemens HMI/SCADA systems where required Produce and modify functional design specifications Carry out software testing, FAT and SAT activities Diagnose and resolve technical issues during commissioning Ensure projects are delivered safely, on time and to specification Expereince Required: Strong experience programming Siemens TIA Portal (S7-1200/1500) Proven background delivering industrial automation or process control projects Experience commissioning PLC control systems Excellent fault-finding and problem-solving skills

CNC Programmer \n \n Solihull / £18.50 - £20 per hour / Days \n \n Monday - Thursday 7:00am - 4:00pm & Friday 7:00am - 12:00pm \n \n Join a well-established precision engineering manufacturer supplying high-quality engineered products to customers across the UK and internationally. This is an opportunity to become part of a well-established engineering business where quality, precision and continuous improvement are at the heart of everything they do. \n \n The CNC Programmer Role \n\n • Programming, setting and operating CNC milling machines.\n, • Modifying existing CNC programs to improve efficiency and quality.\n, • Working on HAAS VMC machining centres.\n, • Manufacturing precision components from engineering drawings.\n, • Supporting apprentices and sharing your machining knowledge.\n, • Troubleshooting machining issues and assisting with continuous improvement.\n, • Carrying out preventative maintenance on machinery.\n, • Working closely with production and quality teams to ensure on-time delivery.\n\n \n The ideal CNC Programmer \n You'll be an experienced CNC Programmer with CNC milling experience and the confidence to support others on the shop floor. \n \n You'll ideally have experience with: \n\n • CNC Milling\n, • HAAS controls\n, • VMC machining centres\n, • Fanuc controls\n, • G-Code editing/modification\n, • Reading engineering drawings\n, • Working to tight tolerances\n\n \n Previous mentoring experience isn't essential. What's important is having the attitude and willingness to pass on your knowledge to apprentices and less experienced engineers. \n \n What's on Offer for this CNC Programmer \n\n • £17.00 - £18.50 per hour\n, • Permanent position\n, • Monday - Thursday 7:00am - 4:00pm\n, • Friday finish at 12:00pm\n, • Stable, well-established business\n, • Opportunity to play a key role in developing future engineers\n\n \n If you're a CNC Programmer who has skills to train into Apprentices then this is the role for you. Apply now and if shortlisted we'll be in touch shortly. \n ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

LS(phone number removed) AV Commissioning Engineer Birmingham / Midlands and surrounding area £40,000 to £45,000 per annum Are you an experienced AV Commissioning Engineer looking for your next challenge? We're working with a forward-thinking company that specialises in delivering cutting-edge Audio Visual (AV) and Video Conferencing (VC) solutions to a wide range of clients. Following a strong year of growth and exciting new projects with some of the UK's top contractors, they're looking to add a talented individual to their team. If you enjoy taking ownership of your work, thrive on problem-solving, and want to work in a modern, supportive environment, this role could be just what you're looking for. What's on Offer: Competitive Salary up to £45,000 pa: Based on your skills and experience. Vehicle Allowance: To support you with your travel needs. Overtime Opportunities: Boost your earnings with additional work. Pension Scheme: Secure your future with a solid pension plan. Holidays: 5 weeks, with the possibility of extra time at Christmas (subject to management approval). Modern Workplace: A professional, well-equipped environment to support your success. Free Refreshments and Snacks: A small perk at the company's office. The Role: As an AV Commissioning Engineer, you'll play a key role in ensuring the successful delivery of high-quality AV, VC, and collaboration projects. You'll take charge of on-site and off-site commissioning, testing, and finalising systems to meet client expectations. You'll also work closely with colleagues, clients, and subcontractors to troubleshoot, guide, and make sure everything is running smoothly. Your Responsibilities Will Include: Commissioning and debugging systems during project delivery, ensuring everything is to spec. Preparing AV racks and systems in the office, using checklists to ensure all equipment is ready before heading to site. Working with the Technical Manager on Crestron Control and Audio DSP programming, keeping all files organised. Liaising with clients to handle networking aspects like Crestron NVX, Dante Audio, IPTV, and digital signage systems. Training clients and end-users to ensure they're confident with the installed systems. Providing technical advice to junior staff and subcontractors to maintain company standards. Conducting audits, logging snags or changes, and handing over final documentation to the Project or Design Manager for system drawings. Supporting Sales and Design teams by offering product advice and technical insights. Providing second-line support to the Service Team when needed. About You: You'll be confident in your abilities and have the qualifications to back it up, with certifications in some of the following: QSC, Biamp, Crestron, Lightware, Shure, Sennheiser, Dante. Certifications like CTS/CTS-I, Avixa training, Microsoft MTR, or network-specific qualifications would also be great, but not essential. You'll have strong technical knowledge, a professional attitude, and a willingness to roll up your sleeves and get stuck in. About the Company: The company specialises in delivering high-end AV solutions to a wide range of clients, from corporate offices to cutting-edge collaboration spaces. They've built a reputation for quality and innovation, working on projects that challenge the norm and exceed expectations. This is a chance to join a growing team where your contributions will be valued, and you'll have opportunities to grow your skills and career. If this sounds like the right role for you, we'd love to hear from you. Apply now to join a team where your technical skills will make a real difference! INDAV You could be an: AV Commissioning Engineer, Commercial AV Specialist, Corporate AV Systems Expert, Audio Visual Technician, AV Systems Engineer, Video Conferencing Engineer, Networked AV Solutions Specialist, AV Project Engineer, Audio and Control Systems Engineer, AV Engineer, Digital Signage Specialist, LED Screen Installer, Video Wall Commissioning Expert, Collaboration Technology Specialist

5-Axis CNC Programmer / Machinist Birmingham Permanent £18-£22 per hour DOE Overview EMBS Engineering Ltd is working in partnership with a leading precision engineering manufacturer, located in Birmingham that is currently in the market for a 5-Axis CNC Programmer / Machinist to join their company permanently. This market leader is a well-established entity within the precision engineering industries and boasts a rich history of supporting globally recognised customers with safety-critical, highly complex components. Operating with a tight-knit, expert team, the company is undergoing exciting changes, including an imminent relocation to a brand-new, modern, state-of-the-art facility featuring excellent employee amenities and dedicated parking. What's in it for you? Stability / Longevity: Join a well-established precision manufacturer investing heavily in its future, backed by brand-new high-performance machinery and an upcoming move to a modern, state-of-the-art factory. Competitive salary: Highly competitive pay rates matching your specialized 5-axis expertise (open to negotiation based on experience). Hours: Days. Standard shift is 7:00 AM to 4:30 PM, Monday to Thursday, with a coveted early finish on Fridays to kickstart your weekend. Benefits: Working with cutting-edge tech (HyperMill, Spinner machines), leadership and mentoring opportunities, clear paths for professional development under a newly appointed Managing Director, and an upgraded working environment. Responsibilities Due to internal changes, a pending factory relocation, and off the back of continued success and investment in high-performance machinery, our client is seeking an experienced 5-axis CNC Programmer / Machinist to maximise the potential of their newly acquired assets and lead their offline programming capabilities. Your responsibilities will include: As a 5-Axis CNC Programmer / Machinist, you will be responsible for the end-to-end manufacturing process of safety-critical components using their new high-performance Spinner machining centres. You will: Create robust 5-axis CNC programs offline using HyperMill CAM software at the dedicated workstation attached to the machines. Prove out, set up, and run the programs safely and efficiently on new 5-Axis Machinery. Work with a variety of machine controls, specifically navigating Heidenhain and/or FANUC operating systems. Collaborate with the team during the upcoming factory relocation to help establish efficient, lean workflows in the new facility. Successful applicants must be able to demonstrate: Proficiency working with Heidenhain and/or FANUC machine controls. (This is essential for this role) A proven track record in 5-axis offline CNC programming, with essential, hands-on experience using HyperMill CAM software (this is a desirable requirement) Strong setting and operating capabilities on 5-axis CNC milling and/OR turning centres. A strong background in precision engineering, confidently working to tight tolerances on complex parts. If you are interested in the opportunity of joining a growing, investing precision engineering business as their 5-Axis Programming specialist and believe you meet the illustrated criteria, apply today to join our clients’ growing team located in Birmingham. About us EMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious, advanced, precision engineering companies within the Aerospace, Automotive / Motorsport, Nuclear, Oil & Gas, Green, Environmental and FMCG industries. We’ll offer you expert support and advice throughout the process to ensure you select and secure a career-defining role. Please note: Due to the nature of the markets our client supplies into, all candidates must be UK residents. We cannot offer visa sponsorship for overseas candidates

The Company Our client is an established commercial fit-out and refurbishment contractor with an excellent reputation for delivering high-quality projects across the UK. They provide a complete design and build service, specialising in workplace fit-outs, refurbishments and interior construction projects for a diverse range of commercial clients. Due to continued growth, they are looking to recruit an ambitious Assistant Project Manager to join their delivery team and support the successful delivery of a variety of exciting projects. The Role Working alongside experienced Project Managers and senior leadership, you'll support the delivery of commercial fit-out, refurbishment and design & build projects from pre-construction through to completion. This is an excellent opportunity for someone looking to develop their career within a supportive, fast-paced environment, gaining exposure to every stage of project delivery while working on high-quality projects across the UK. Key Responsibilities Assist with the day-to-day management of multiple commercial fit-out and refurbishment projects. Support the planning, programming and coordination of projects from pre-start through to completion. Attend client, design, subcontractor and site meetings, ensuring actions are followed through. Work closely with design, commercial, procurement and site teams to keep projects on programme. Monitor project progress, identifying potential risks and helping implement solutions. Assist in managing subcontractors, suppliers and specialist trades. Support procurement, material scheduling and project logistics. Help manage project documentation including RFIs, technical submissions and drawing registers. Carry out regular site visits to monitor quality, progress and Health & Safety compliance. Support cost control, change management and project reporting alongside the commercial team. Build strong working relationships with clients, consultants and the supply chain. About You We're looking for someone who is organised, proactive and keen to build a long-term career within commercial fit-out and refurbishment. Ideally you'll have: Experience within commercial fit-out, refurbishment or construction. Previous experience as an Assistant Project Manager, Project Coordinator, Site Manager, Design Coordinator or similar. A good understanding of construction processes and project delivery. Strong communication and organisational skills. The ability to manage multiple priorities in a fast-paced environment. Good IT skills, including Microsoft Office. A positive attitude with a willingness to learn and develop. A full UK Driving Licence

CNC Applications Engineer Birmingham, with UK Wide Travel (Candidates based anywhere across the UK) £Competitive£ + Company Car + Private Healthcare + Life Assurance + Training + Career Progression + Company Benefits Excellent opportunity for an experienced CNC Engineer to join a market-leading machine tool business in a varied field-based Applications role. This is a fantastic opportunity to join a well-established and successful business, offering specialist product exposure, and the chance to work with some of the most advanced CNC machine tool technologies available in the industry. This company specialise in the supply, installation and service of CNC machinery throughout the UK. Due to their continued success, they have grown year on year and are known for being a great place to work with a high staff retention. Due to continued growth, they are looking to expand their Applications Team with a skilled engineer to support customers across the UK and Ireland. In this role, you'll train customers on CNC machine operation and programming, support projects and installations, and provide technical application support on-site. The role involves regular UK travel and working away during the week. This is a fantastic opportunity to utilise your CNC background in an Applications role, working for a successful and growing company offering long-term progression, specialist product training, and excellent company benefits. THE ROLE: Training customers on CNC machine operation and programming Supporting installations and customer projects Providing technical support across the UK & Ireland Working with 5-axis and multi-tasking machines Field-based role with regular travel THE PERSON: Fanuc and Siemens programming experience essential 5-axis machining or mill/turn experience Able to read engineering drawings Heidenhain and Fusion 360 knowledge beneficial Time-served engineer preferred Reference Number - BBBH(phone number removed)d Leamington Spa, Northampton, Nuneaton, Birmingham, Stratford, Solihull, Rugby, Redditch, Worcestershire, Coventry, Leicester, Stoke-on-Trent, Walsall, Wolverhampton, Worcester. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

We are a market-leading specialist in the manufacture of ultra-precision, high-performance components. We don't work with your run-of-the-mill metals; instead, we engineer complex components from advanced, high-strength technical materials designed to withstand extreme environments. Our products are vital to pioneering industries, including aerospace, medical, semiconductor, and defense. If you are a skilled CNC Turner who loves a technical challenge and enjoys working to exceptionally tight tolerances, you'll fit right in. The Role We are looking for a skilled CNC Turner who can Program, Set, and Operate Mazak CNC Lathes. Because our materials are highly specialized, this isn't a "button-pushing" high-volume job. You will be working on low-volume, high-value runs, requiring a methodical approach, deep machining knowledge, and a high level of attention to detail. Key Responsibilities Program, set, and operate Mazak CNC Lathes using Mazatrol (and/or ISO) controls. Set up tooling, choose correct speeds/feeds, and prove out new programs safely. Manufacture low-volume, high-precision parts down to micron-level tolerances. Interpret technical engineering drawings and geometric tolerances (GD&T). Perform self-inspection on parts using micrometers, verniers, and shadowgraphs to ensure flawless quality. Collaborate with the engineering team to optimize machining processes for challenging, non-standard materials. What We Are Looking For The Mazak Expert: Strong, hands-on experience programming, setting, and operating Mazak CNC Lathes (Mazatrol controls are essential). Precision-Focused: Proven experience working to extremely tight tolerances (microns matter here). Material Savvy: While experience with our specific high-performance materials is a bonus, a background machining challenging materials (like superalloys, exotics, or hard plastics) is highly desirable. The Problem Solver: Someone who can look at a complex drawing, figure out the best machining strategy, and execute it independently. What’s in It for You? Clean & Modern Environment: Work in a clean, temperature-controlled, state-of-the-art facility. Competitive Pay: Excellent hourly rate with plenty of overtime potential. Great Benefits: Generous pension scheme, health cash plan, and [Insert Number] days holiday. Stability & Growth: We are growing rapidly, meaning genuine opportunities for long-term career progression and technical training

Mechanical Project Manager West Midlands £75,000 + Car Allowance + Benefits Mechanical Project Manager required to work for a reputable and award winning client Tier 1 contractor to deliver large scale exciting commercial projects across the West Midlands Mechanical Project Manager responsibilities: Full support and project management on large scale projects Programming of works, updating reports where required Build solid communication channels Take a lead on all Client, Contractor, Site Meetings Contribute to the progress of the project Full control of labour and materials and ensure within the given budget Ensuring Health and Safety is adhered to on-site Design input * Commercial acumen Click to apply or email/ call Narinder Rehal on the number provided I can also be contacted via LinkedIn - ( 1313 - Narinder Rehal)

Architect Location: Birmingham City Centre Salary: up to £60,00 DOE Are you a talented ARB-registered Architect looking to join a progressive and design-led architectural practice? Our client is seeking a motivated Architect to play a key role in the design and delivery of projects across a diverse range of sectors. This is an excellent opportunity to work within a collaborative studio environment that values creativity, innovation, sustainability, and professional development. The Role Reporting to a Senior Architect, Associate, or Partner, you will contribute to the successful delivery of projects from concept through to completion, working closely with clients, consultants, and contractors to achieve outstanding design outcomes. The successful candidate will be involved in all stages of the design and construction process while supporting the practice's commitment to high-quality architecture and exceptional client service. Key Responsibilities Design & Technical Delivery Develop creative and practical design solutions in line with project briefs and regulatory requirements. Produce drawings, specifications, and technical documentation across all RIBA Stages 0-7. Support planning applications and technical submissions, ensuring compliance and accuracy. Maintain a strong understanding of UK Building Regulations, planning policies, and industry standards. Participate in internal design reviews and CPD activities.Project Coordination Collaborate with internal teams, consultants, contractors, and stakeholders. Attend site visits, client meetings, and design workshops. Assist with project programming and deliverables under the guidance of senior team members. Ensure effective communication and coordination throughout project lifecycles. About You To be considered for this position, you will have: ARB registration (RIBA Parts I, II & III qualification pathway). Strong design, presentation, and technical skills. Proficiency in Revit, AutoCAD, Adobe Creative Suite, and Microsoft Office. Good understanding of UK construction methods, Building Regulations, and planning processes. Excellent communication and organisational abilities. The ability to work effectively both independently and within a multidisciplinary team.Professional Development Our client is committed to supporting career growth and continuous learning through: RIBA-accredited CPD programmes. Internal knowledge-sharing initiatives. Access to external courses, seminars, and professional development opportunities. Ongoing support in maintaining ARB and RIBA CPD requirements. Career Progression This role offers a clear pathway towards Senior Architect level, with progression based on performance, experience, and contribution to the practice. What's on Offer? Opportunity to work on a varied portfolio of exciting projects. Supportive and collaborative studio environment. Clear career progression opportunities. Commitment to professional development and training. Salary up to £60,000 DOE If you're an ambitious Architect looking to further your career within a forward-thinking practice, we'd love to hear from you. Apply today or contact Dara Gedge at Options Resourcing for a confidential discussion

CNC Operator (Defence/Engineering) Birmingham Up to £42,000 (£60,000+ with overtime) + Flexitime + In-House Training + Early Finish Friday Are you a CNC Operator with programming experience looking for a role at a well-established Precision Engineering company, who work with a variety of materials in a variety of industries such as Defense, in a role that provides great company benefits including flexitime and early finish Friday? Do you want to work in a role at a leading UK manufacturer with great company benefits, including but not limited to extensive overtime earning potential at a 1.5x rate, flextime opportunities enabling you to work your week to best fit you, in-house training on the company's expertise, and an early finish every Friday? On offer is a fantastic opening at an extremely well-established bespoke Precision Engineering manufacturer with a distinguished reputation spanning for over 30 years, enabling them to become one of the most trusted and high-quality manufacturers in the West Midlands for a variety of exciting and varied industries. In this role you will be responsible for operating and programming CNC Millers and reading and interpreting engineering drawings, helping in the production of industry leading bespoke Precision parts with a variety of materials for a variety of exciting industries. These will be FANUC controlled machines. This role would suit a CNC Miller with experience in FANUC programming, looking for a role at a Trusted UK leading manufacturer known for their high quality of work and great company benefits, including excessive overtime earning potential, flextime, in-house training, and an early finish Friday. The Role Operating and Programming CNC Millers Programming CNC Millers using Fanuc, other programming package experience is suitable Monday to Thursday 7:30 am to 4:30 pm and Friday 7:30 am to 1:30 pmThe Person CNC Miller with programming experience Commutable distance to West BromwichRef: BBBH26340 Keywords: CNC, CNC Miller, Miller, Milling, CNC Operator, CNC Machinist, Programmer, CNC Programmer, Precision Parts, Manufacturing, Training, Programming, Overtime, West Bromwich, Birmingham If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website

Quality Inspector Location: Birmingham Salary: Negotiable Company Overview Precision Ceramics is a specialist in advanced ceramic materials and components, delivering world-class solutions for demanding applications across industries including aerospace, defence, medical, and electronics. We pride ourselves on technical expertise, innovation, and a commitment to the highest quality standards. Role Summary The Quality Inspector will be responsible for ensuring that all ceramic products meet the company’s rigorous quality standards and customer specifications. The role involves inspecting raw materials, in-process components, and finished products, identifying defects, and supporting continuous improvement within the quality management system. Key Responsibilities Conduct visual, dimensional, and functional inspections of ceramic components at various stages of production. Use precision measuring equipment (micrometers, calipers, gauges, CMM, optical equipment, etc.) to verify product conformity. Operate and program CMM (Coordinate Measuring Machine) equipment to perform complex inspections. Review engineering drawings, technical specifications, and inspection plans to ensure accurate assessments. Record and maintain inspection results in accordance with internal documentation and ISO standards. Identify, report, and document non-conformances and assist with root cause analysis and corrective actions. Support calibration and maintenance of measuring equipment. Collaborate with production teams to resolve quality issues promptly and effectively. Contribute to continuous improvement initiatives in line with company quality objectives. Skills & Experience Required Proven experience in a quality inspection role, preferably within ceramics, aerospace, precision engineering, or advanced manufacturing. Strong CMM experience (operation and ideally programming) – essential. Strong knowledge of dimensional inspection techniques and use of metrology equipment. Ability to read and interpret complex engineering drawings and technical documents. Familiarity with ISO 9001 or AS9100 quality standards. Good IT skills for data entry and use of inspection software. Excellent attention to detail, problem-solving ability, and communication skills. Desirable Experience with ceramic materials or high-precision components. Knowledge of statistical process control (SPC) and lean manufacturing principles. What We Offer Competitive salary and benefits package. Training and development opportunities. A supportive environment in a growing, innovative company. The chance to work with advanced materials for high-performance applications worldwide. Hours AM: Monday to Thursday 0730 – 1600 and Friday 0730 – 1230 PM: Monday to Thursday 1300 – 21300 and Friday 0900 – 1400 There are 2 positions available in total. The above shifts are set working patterns, and the successful candidates will be required to work either the AM pattern or the PM pattern depending no your preference. To Apply If you feel you are a suitable candidate and would like to work for Precision Ceramics, please do not hesitate to apply

BMS Project Engineer Location: Birmingham Salary: £50,000 - £55,000 Hours: 40 hours per week (8:00am - 5:00pm, onsite) Commutable from: Worcester, Redditch, Kidderminster, Droitwich, Bromsgrove Benefits 24 days holiday + bank holidays Overtime available Company Overview A well-established engineering business delivering building systems and technical solutions across a range of commercial and industrial environments. Role & Responsibilities (BMS Project Engineer) Programming and commissioning of building management systems Creation of control strategies and system graphics Supporting project delivery from design through to completion Site visits for commissioning and technical support Knowledge, Skills & Experience (BMS Project Engineer) Proven experience commissioning BMS systems in a UK environment Strong knowledge of Trend or Niagara platforms Ability to produce software logic and interpret control schematics Electrical or controls engineering background with hands-on experience Full, clean driving license is essential This is a great opportunity for an experienced BMS Project Engineer looking to join a stable and growing business delivering varied projects across the region. Your application will be sent directly to our consultant Itzel. After reviewing your application, she will be in touch within 48 hours. If you haven't heard back within this time, please feel free to get in touch. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

CNC Lathe Programmer / Setter Operator Required! \n Our client is an established manufacturing business, producing specialist metal components and assembly solutions to a range of industries. \n On behalf of our client, we are seeking an experienced CNC Lathe Programmer / Setter Operator to join the team. The successful candidate will be responsible for programming, setting, and operating CNC lathes to ensure efficient production in line with the build plan, maintaining high-quality standards, and maximising machine utilisation and output. \n Package: \n\n • Rotating shift pattern - 6am - 2pm & 2pm - 10pm\n, • £17 - £21 per hour (DOE)\n, • Company pension scheme\n, • 20 days holiday plus bank holidays\n\n CNC Lathe Programmer / Setter Operator - Responsibilities: \n\n • Program, set, operate, and monitor CNC lathes to meet production targets in line with the build plan.\n, • Ensure machines run efficiently with minimal downtime and support breakdown resolution.\n, • Carry out job and tool changes, ensuring smooth production flow.\n, • Produce and gain approval for first-off and in-process quality checks in line with procedures.\n, • Support new product introduction by manufacturing prototype and development parts.\n, • Maintain accurate real-time production records using the Mietrak MRP system.\n, • Monitor tooling levels and request replacements to avoid disruption to production.\n, • Maintain high housekeeping standards and ensure a safe, organised work area (5S).\n, • Liaise with warehouse and FLT teams to ensure timely movement of finished goods.\n, • Communicate issues, risks, and improvements to the Team Leader.\n, • Support, guide, and assist other operators, including training new starters.\n, • Ensure machines are correctly set and running with clear shift handovers.\n, • Undertake other reasonable tasks within capability as required by the Team Leader.\n\n CNC Lathe Programmer / Setter Operator - Requirements: \n\n • Experience in programming, setting, and operating CNC lathes.\n, • Knowledge of Haas or Dugard VMC (Fanuc controlled) preferred.\n, • NVQ or C&G in Mechanical Engineering / CNC Setting & Programming (or equivalent experience).\n, • Ability to read and interpret technical engineering drawings.\n, • Competent in the use of engineering measuring equipment.\n, • Forklift licence (desirable but not essential).\n, • Knowledge of abrasive wheel regulations (desirable).\n\n \n \n Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.

Our client is a well-established Tier 1 Main Contractor with a strong reputation for delivering high-quality construction projects across the West Midlands. They operate across multiple sectors including commercial, industrial, education, residential, and leisure. Due to continued growth and a strong project pipeline, they are seeking an experienced Senior Site Manager to join their production team and support the delivery of major construction schemes. Senior Site Manager roles and responsibilities Take overall responsibility for the successful delivery of projects or major sections of works, ensuring safe, timely, and high-quality completion. Plan, coordinate, and manage all on-site activities in line with the construction programme and project requirements. Monitor progress against programme targets, identifying risks and implementing corrective actions to maintain delivery. Lead and coordinate subcontractors and site teams to ensure efficient sequencing of works. Promote and enforce a strong health, safety, and environmental culture across all site operations. Ensure full compliance with HSE legislation, CDM Regulations, and company procedures. Carry out regular site inspections, audits, and risk assessments. Manage incident reporting and ensure corrective and preventative actions are implemented. Lead, mentor, and manage Site Managers, Assistant Site Managers, and site operatives. Act as the main point of contact for clients, consultants, and supply chain partners on site. Chair progress meetings and provide accurate reporting on programme, quality, safety, and site performance. Maintain high standards of workmanship and ensure quality expectations are consistently achieved. Senior Site Manager requirements HNC, HND, NVQ Level 6/7, or Degree in a construction-related discipline. Extensive experience as a Site Manager or Senior Site Manager within the construction industry. Proven track record of delivering medium to large-scale construction projects, ideally £30m+. Experience working for a Tier 1 Main Contractor is highly desirable. Experience across sectors such as commercial, education, industrial, healthcare, or residential. SMSTS certification. Valid Black CSCS Card. Strong planning, programming, and commercial awareness skills. In-depth understanding of construction methods and best practice. Strong leadership, communication, and decision-making abilities. Senior Site Manager benefits Opportunity to work with a leading Tier 1 Main Contractor with a strong regional presence. Long-term career progression within a growing and stable business. Exposure to high-value, landmark projects across the Midlands. Competitive salary and comprehensive benefits package. * Supportive team environment with strong focus on professional development and leadership growth

Python Risk Developer (Contract) - FICC / Emerging MarketsDublin, Ireland | Remote WorkingContract Role Overview Our client, a prestigious financial institution in Dublin, is seeking an experienced Python Risk Developer for an exciting contract opportunity. The successful candidate will be working on cutting-edge risk management solutions for Emerging Markets within Fixed Income, Currencies, and Commodities (FICC). Key Responsibilities • Develop algorithms and strategic frameworks for next-generation risk management platforms, • Participate in all stages of the software development lifecycle, • Collaborate daily with traders, quantitative analysts, and senior stakeholders, • Design and implement robust risk calculation and reporting solutions, • Contribute to system architecture and technical design decisions Required Skills & Experience, • Strong Python programming skills, including proficiency with NumPy, SciPy, and other scientific libraries, • Demonstrated experience in financial risk management systems development, • Understanding of FICC products, particularly in Emerging Markets, • Knowledge of software engineering design patterns and best practices, • Experience with market data feeds and consumption technology (e.g., Reuters, Bloomberg), • Familiarity with yield curves and their construction methodologies Preferred Qualifications, • Experience working in tier-one financial institutions, • Background in Market Risk or Trader Risk development, • Strong knowledge of rates and fixed income products, • Experience working in fast-paced delivery environments, • Ability to communicate complex technical concepts to non-technical stakeholders What Our Client Offers, • Competitive contract rates, • Hybrid/ remote working arrangement, • Opportunity to work on high-profile projects with exposure to senior business sponsors, • Collaborative environment with cutting-edge technology, • Professional development in advanced risk management technologies If you're an experienced Python developer with a strong interest in financial risk systems and are looking for your next challenging contract role, please get in touch with us today! McGregor Boyall is an equal opportunity employer and do not discriminate on any grounds.

Job Title: Devops engineer Location : Edinburgh UK Work mode : Hybrid Experience: 8 + Years Key Responsibilities: Design, implement, and manage CI/CD pipelines for automated builds, testing, and deployments. Maintain and optimize infrastructure as code (IaC) using tools like Terraform, Ansible, or CloudFormation. Manage cloud infrastructure (AWS, Azure, or GCP) for high availability and scalability. Implement and monitor container orchestration platforms (Kubernetes, Docker, EKS, AKS, GKE). Ensure system reliability through logging, monitoring, and alerting solutions (Prometheus, Grafana, ELK/EFK, CloudWatch). Drive automation initiatives to reduce manual effort and improve system efficiency. Collaborate with development, QA, and security teams to enable DevSecOps practices. Troubleshoot production issues, perform root cause analysis, and apply permanent fixes. Contribute to disaster recovery and backup planning. Mentor junior engineers and share best practices within the team. Required Skills & Qualifications: 8–12 years of proven experience in DevOps, Site Reliability Engineering, or Cloud Infrastructure roles. Strong expertise in cloud platforms: AWS / Azure / GCP. Hands-on experience with CI/CD tools: Jenkins, GitLab CI, GitHub Actions, ArgoCD, etc. Proficiency in Infrastructure as Code (IaC): Terraform, Ansible, Helm. Solid understanding of Kubernetes & containerization. Knowledge of networking, load balancing, security, and firewalls in cloud environments. Expertise in monitoring, logging, and observability. Scripting/programming skills in Python, Bash, or Go. Familiarity with DevSecOps practices and security compliance standards.

Software Engineer, Consensus - Anza Anza is a Solana R&D lab pushing the boundaries of blockchain performance and scalability. Anza was founded by experienced executives and core engineers solving the toughest problems in Web3. Crypto ecosystems rely on robust protocols, and we believe those are best built out in the open, with multiple contributors. We pioneer advanced solutions to meet the evolving demands of decentralized applications. As a Software Engineer specializing in consensus, you will play a critical role in fortifying Anza's Agave client and the broader Solana network. Your work will directly improve the efficiency and reliability of our blockchain infrastructure, ensuring robust, timely consensus mechanisms. You will focus on optimizing the processes that underpin the agreement on block validity and order, ensuring they are secure, performant, and scalable to support future growth. • Develop and Optimize Consensus Mechanisms: Design, implement, and optimize the mechanisms for consensus to enhance the throughput and stability of the Solana network., • Efficient Coordination: Develop and refine algorithms to ensure fair and efficient agreement on block production among validators., • Ensure Security and Integrity: Identify and mitigate potential security vulnerabilities within the consensus mechanisms, ensuring robust protection against emerging threats., • Scalability and Performance: Work on improving the scalability of the consensus system to handle increasing transaction volumes and validator participation without compromising on performance., • Testing and Validation: Create and execute comprehensive tests to validate the reliability and efficiency of the consensus mechanisms, including stress tests, fault injection, and performance benchmarking., • Collaboration: Collaborate with cross-functional teams, including core protocol engineers, security experts, and infrastructure teams, to ensure the seamless integration and functioning of the consensus components., • Documentation and Code Review: Maintain thorough documentation of the consensus protocols and conduct peer code reviews to uphold high standards of code quality and consistency., • Experience: A Bachelor's degree in Computer Science, Engineering, or equivalent practical experience and 3+ years of hands-on experience with core infrastructure software and distributed systems., • Technical Expertise: Strong proficiency in systems programming languages such as Rust or C++. Experience with consensus algorithms, distributed systems, and blockchain technology is highly desirable., • Problem-Solving Skills: Ability to analyze complex systems, identify potential issues, and develop effective, flexible solutions., • Security Mindset: Knowledge of common security threats and best practices in securing consensus processes., • Growth Mindset: Actively consuming research papers, designing, and investigating new solutions., • Performance Optimization: Experience with performance profiling and optimization techniques., • Collaboration and Communication: Excellent teamwork and communication skills, with the ability to work effectively in a collaborative environment., • Familiarity with Linux, systems automation tools, and systems architecture., • Understanding of networking, architecture, and principles underlying distributed systems., • A knack for designing secure protocols, software, and algorithms that minimize trust requirements., • Self-driven, research oriented, and the ability to learn independently., • Active participation in Bitcoin/Ethereum/Blockchain projects or the open-source community is highly desirable. We offer a dynamic, fast-paced environment where innovation and problem-solving are at the heart of everything we do. Here, your work will have a direct impact on the security and scalability of blockchain technology, contributing to the foundation of decentralized applications worldwide. We're excited to welcome individuals who share our passion for pushing the boundaries of blockchain technology. If you're ready to take on the challenge and contribute to the next generation of blockchain infrastructure, we'd love to hear from you. The salary range for US-based candidates will be determined throughout the interview process depending on experience, skill, and location. Candidates should anticipate an annual base salary (not including incentive compensation or other benefits) of $180,000 USD to $300,000 USD.

Role: AI Engineer Experience: 8-10years Location: London Contract duration: 12 months Job Description: Proven experience as an AI, Machine Learning, or Privacy Engineer. • Proficiency in programming languages such as Python is added advantage., • Experience with deep learning frameworks like TensorFlow, PyTorch, or JAX., • Experience working with multi-cloud technologies. GCP is mandatory., • Excellent analytical and communication skills, with the ability to explain complex technical and privacy concepts to non-technical stakeholders, • Experience with adversarial testing and robustness evaluation of AI models., • Experience in the end-to-end development of AI/ML models and applications., • Ability to lead and train the team on model training

Grafana Labs is a remote-first, open-source powerhouse. There are more than 20M users of Grafana, the open source visualization tool, around the globe, monitoring everything from beehives to climate change in the Alps. The instantly recognizable dashboards have been spotted everywhere from a NASA launch and Minecraft HQ to Wimbledon and the Tour de France. Grafana Labs also helps more than 3,000 companies -- including Bloomberg, JPMorgan Chase, and eBay -- manage their observability strategies with the Grafana LGTM Stack, which can be run fully managed with or self-managed with the , both featuring scalable metrics (), logs (), and traces (_). We’re scaling fast and staying true to what makes us different: an open-source legacy, a global collaborative culture, and a passion for meaningful work. Our team thrives in an innovation-driven environment where transparency, autonomy, and trust fuel everything we do. You may not meet every requirement, and that’s okay. If this role excites you, we’d love you to raise your hand for what could be a truly career-defining opportunity. This is a remote opportunity and we would be interested in applicants based in Spain, Germany, the UK or Sweden at this time. The Opportunity: As a Mimir Engineer you’ll join one of two sub-squads, Ingest or Query, that together maintain the open source _ and operate Grafana Cloud Metrics across three major cloud providers. This role offers the opportunity to work on large-scale, high-performance distributed systems where efficiency, resilience, and reliability are essential to keeping our metrics offerings competitive and smooth at massive volumes. Mimir engineers work across a variety of streams. You’ll typically collaborate with another engineer on a larger project while also driving performance and reliability improvements identified from operating the system in production. In this role, you’ll write and review PRs and design documents, help guide automated release rollouts, and participate in the on-call rotation for the systems you own. This is a chance to directly shape, optimize, and scale one of the industry’s most advanced metrics platforms. What You’ll Be Doing: • Take an active role in influencing our roadmap and your own career objectives, • Work with your team to deliver new features, then use the results to iterate and improve., • Drive projects from initial idea all the way to operations once it is in the hands of customers, • Embrace our open-source culture and contribute to other projects that may not directly fall within your team’s scope, • Design, build, operate, and maintain critical systems, owning the reliability, performance, and availability, • Be a part of your team’s follow-the-sun on-call rotations and take ownership of the services you’re running, • Support other team members, participate in design discussions and collaborate with the team, • Learn new skills by gaining a deeper understanding of our cloud product and our customers and getting to know the codebase of a large distributed system What Makes You a Great Fit: • Pragmatism: You are able to take on complex challenges and break them down to achieve short feedback loops: to analyze, design, and build modular solutions, deliver MVPs, gather data and feedback and then progress iteratively, • Collaboration and communication: The smallest unit we have is a squad. You’ll be working with your teammates in a fully remote setup. Good communication skills are a must., • Solid experience with at least one programming language. We use Go, but if you have familiarity with Python, C, C++, Rust or similar then that translates well, • Some experience with delivering projects from gathering requirements, brainstorming ideas all the way to shipping a product to the customer’s hands in a self-driven way, • Some experience with developing software that runs in the Cloud or some experience with systems engineering, • Some experience with being on-call and following the DevOps model, • Experience writing clean, robust, and performant software that is easily maintained by others, • Familiarity with observability systems, know when to use metrics, logs, traces, to debug a problem. Bonus Points For: • Experience working with Kubernetes, • Experience working with queue systems, e.g. the Kafka protocol, • Been a user of Grafana and Prometheus in operational roles (including on-call for your team at a previous employer or just using these tools on hobby/homelab projects), • Exposure to microservices architecture and distributed systems, or a desire to learn, • Familiarity with the concept of infrastructure as code In United Kingdom, the compensation range for this role is GBP 91,755 - GBP 110,106. Actual compensation may vary based on level, experience, and skillset as assessed throughout the interview process. All of our roles include Restricted Stock Units (RSUs), giving every team member ownership in Grafana Labs' success. We believe in shared outcomes—RSUs help us stay aligned and invested as we scale globally. *Compensation ranges are country specific. If you are applying for this role from a different location than listed above, your recruiter will discuss your specific market’s defined pay range & benefits at the beginning of the process. Why You’ll Thrive at Grafana Labs: • 100% Remote, Global Culture - As a remote-only company, we bring together talent from around the world, united by a culture of collaboration and shared purpose., • Scaling Organization – Tackle meaningful work in a high-growth, ever-evolving environment., • Transparent Communication – Expect open decision-making and regular company-wide updates., • Innovation-Driven – Autonomy and support to ship great work and try new things., • Open Source Roots – Built on community-driven values that shape how we work., • Empowered Teams – High trust, low ego culture that values outcomes over optics., • Career Growth Pathways – Defined opportunities to grow and develop your career., • Approachable Leadership – Transparent execs who are involved, visible, and human., • Passionate People – Join a team of smart, supportive folks who care deeply about what they do., • In-Person onboarding - We want you to thrive from day 1 with your fellow new ‘Grafanistas’ to learn all about what we do and how we do it., • Balance is Key - We operate a global annual leave policy of 30 days per annum. 3 days of your annual leave entitlement are reserved for Grafana Shutdown Days to allow the team to really disconnect. *We will comply with local legislation where applicable. Equal Opportunity Employer: We will recruit, train, compensate and promote regardless of race, religion, color, national origin, gender, disability, age, veteran status, and all the other fascinating characteristics that make us different and unique. We believe that equality and diversity builds a strong organization and we’re working hard to make sure that’s the foundation of our organization as we grow. Grafana Labs may utilize AI tools in its recruitment process to assist in matching information provided in CVs to job postings. The recruitment team will continue to review inbound CVs manually to identify alignment with current openings. #LI-Remote For information about how your personal data is used once you’ve applied to a job, check out our .

Who We Are Having surpassed $300M ARR and continuing to grow, Optro is the leading audit, risk, ESG, and InfoSec platform on the market. More than 50% of the Fortune 500, including 7 of the Fortune 10, leverage our award-winning technology to move their businesses forward with greater clarity and agility. And our customers love us: Optro is top-rated on _ and Gartner Peer Insights. At Optro, we inspire each other to innovate and are proud of what we are producing. We spend each day thinking of new ways to help our customers and contribute to the greater good of our company and our surrounding communities. We are all about assisting each other and breaking through barriers to create the most loved audit, risk, ESG, and InfoSec platform by our customers. This is how we have become one of the 500 fastest-growing tech companies in North America for the seventh year in a row, as ranked by Deloitte! Why This Role is Exciting Optro has a stateless containerized application architecture built on Kubernetes, hosted on multiple cloud platforms and regions, and maintained with our custom automation infrastructure software. Optro is looking for a Senior Software Engineer II specialized in Infrastructure Engineering who has industry experience scaling reliable and secure cloud infrastructure at a global scale. You'll bring end-to-end experience building, designing, and supporting a cloud-based infrastructure stack, and you're comfortable driving infrastructure projects from concept through to production as an individual contributor - taking requirements from QA, Engineering, Technical Support, and others, writing clear design documentation, and producing secure, scalable, robust implementations. You love to collaborate but can also work independently, and you're energized by mentoring fellow engineers and helping shape architecture decisions on the team. Key Responsibilities Architect and implement new cloud infrastructure to enable high-performance SaaS applications globally in the cloud. Drive infrastructure features end-to-end, from design documentation through implementation, rollout, and operational ownership. Build and deliver observability tools and analyze data, working with the application development team to ensure a consistently superb customer experience. Continue to grow automation for infrastructure provisioning, developer efficiency, and internal tooling efficiency. Apply AI-assisted development tools to accelerate IaC, automation, code review, and on-call workflows, while maintaining a high bar for security, correctness, and review discipline. Mentor fellow engineers and contribute to team-wide architecture decisions. Assist our customer support and sales teams with technical issues regarding the Optro application. Maintain reliability for our production systems to exceed our SLA requirements, including participation in an on-call rotation for production issues. Help define internal Service Level Objectives and Service Level Indicators for the Infrastructure Engineering team to drive better reliability. Collaborate with engineers, designers, and product managers; give and receive feedback well in a dynamic environment. Attributes for a Successful Candidate 5+ years of software development experience, with a track record of taking projects from concept to production Strong software development background with strong expertise in at least one programming language (Go, Python, TypeScript, or similar) Experience with Docker and running container orchestration systems (Kubernetes preferred) Experience working with cloud services providers (AWS or Azure preferred) Experience with Infrastructure as Code and other cloud automation tools (HashiCorp suite) Experience building observability tooling, dashboards, and alerting for monitoring distributed systems Experience designing globally distributed systems in a cloud-based, container-based world Comfort writing clear design documentation and influencing architecture decisions Fluency with AI-assisted development tools (e.g., Claude Code, Cursor, Copilot) and good judgment about when and how to apply them Bonus: open-source contributions or prior experience defining SLOs/SLIs for production services *perks may vary based on eligibility/location Our Company Values Customer obsession: It starts and ends here. Consistently ask yourself how what you’re doing creates value for our customers. It’s a mindset. Gritty resilience: Make it happen. Find a way. Move fast, stay positive, and do what it takes. Drive innovation: Create the future. Continuously improve what exists and invent what’s next. Win, together: One team. No silos, no egos. Drive to be the best and support each other’s success. Growth mindset: 10x, not 10%. Think in orders of magnitude, not increments. Seek feedback, learn, and improve. Please note that background checks are required. Qualified Applicants with arrest or conviction records will be considered for Employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. This role may have access to highly sensitive data, including employee data, customer data, company financials, and proprietary product information. We love building strong partnerships, but please note that Optro cannot accept unsolicited resumes from agencies. Any submissions without a signed agreement in place will not create a fee obligation. #LI-Remote