Plant jobs in LiverpoolCreate job alerts

An excellent opportunity for an experienced Field Service Engineer – Mobile Welfare Units to join a well-established company. Job Type: Full-Time, Permanent Salary: Competitive Salary, Depending on Experience. Location: Liverpool – Home Based – Working in the Field. About The Company: They are a market leader in the repair and maintenance of towable and static cabins that keep site teams warm, fed and safe on construction, civils and events sites nationwide. About The Role: To attend, diagnose and repair mobile welfare cabins in the field — restoring generators, power, heating, water and waste systems to full working order, first-time wherever possible, while working safely and unsupervised at customer sites. The role is van-based and mobile, covering breakdowns and warranty/service work across customer and hire-fleet sites. A large share of faults are diagnosed remotely (via unit telemetry) before attending, so the engineer must be comfortable interpreting remote data and arriving prepared. What the Role Actually Deals With: Generators / diesel engines - Oil pressure & oil-change faults, fuel systems, exhaust/DPF, alternator, AVR, governor, glow, E-stop, servicing. Engines: HATZ, Kubota, Lombardini, Perkins, Stephill (Boss L48/L70/L100 units). Plumbing, water & waste - Frozen/burst pipes, tanks, UV filters, water pumps, toilets, waste-level sensors, leaks. Electrical & power - 12/24V DC systems, Victron kit (inverters, Cerbo, MPPT/solar), fuses, relays, wiring looms, sockets, PIR lighting, "no power" / dead-console faults, electrical-test compliance. Diesel heaters - Parking/diesel heaters — glow-pin and fuel-pump failure, re-priming, rewiring, thermostats, frost-related no-heat. Batteries - Lithium battery diagnosis (100/200Ah), BMS behaviour, Victron charge settings, deep-discharge recovery, charge/hold faults. Telemetry / comms - Units not updating/communicating — SIM/modem, Cerbo, remote-monitoring diagnosis and SIM replacement. Towing & chassis - Lifting rams/pins, wheels-down locking, coupling, brakes, tyres — getting units mobile. Hydraulics - Power packs, rams, solenoids for raising/lowering units. Fabrication - Doors, door closers, hoods, structural repair. Solar - Panels and MPPT charge faults. Roughly 1 in 5 reported faults turn out to be user error — so customer education, clear on-site communication and honest reporting matter as much as the wrench work. Candidate Requirements Essential: Proven multi-skilled field service / plant / mobile-mechanic background (welfare units, generators, plant, HGV, marine, motorhome/leisure, or similar). Diesel engine fault-finding and servicing (small industrial engines — HATZ, Kubota, Lombardini, Perkins or equivalent). 12V / 24V DC electrical competence — fault-finding wiring, fuses, relays, inverters, charging systems using a multimeter. Confident reading fault data / telemetry and working from remote diagnostics. Practical plumbing / water-system repair skills. Strong problem-solving and first-time-fix mindset; comfortable working alone and unsupervised. Full UK driving licence; B+E (trailer/towing) entitlement or willingness to obtain. Good customer-facing manner and clear written job reporting. Highly Desirable: Electrical qualification — City & Guilds 2391 (Inspection & Testing) and/or 18th Edition (BS 7671); PAT competence. Experience with Victron energy systems (Cerbo GX, MultiPlus inverters, MPPT, VRM) and lithium/BMS battery systems. Diesel parking/air heater experience (Webasto/Eberspächer-type). Hydraulics (power packs, rams, solenoids). Fabrication repairs. Solar PV, and basic IT/comms (SIM, modem, routers) familiarity. Relevant safety tickets (CSCS Card, first aid, working at height, manual handling). Personal Attributes Self-motivated and reliable — the customer's day-rate is stopped until the unit works again. Methodical and safety-first, especially around live electrics, fuel and lifting operations. Resilient and adaptable — outdoor, all-weather, sometimes remote sites. Honest reporter — records what was found and done, including when a fault is user error or unresolved. Working Conditions Field-based, mobile role with company van and tools. Regional travel to customer and hire sites; some early starts / site-hours working. Breakdown-response element — may include on-call / out-of-hours cover (to be confirmed). Physical role: lifting, working outdoors, in confined welfare-unit plant spaces and all weathers. What they offer Competitive salary (depending on experience). Company pension. Company van, tools and PPE. Manufacturer and in-house training across generators, power, heating and telemetry. Varied, hands-on work with a UK manufacturer that builds what you fix. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need

Job Title - Resident Engineer \n Location - Halewood, Merseyside \n Salary: £34,000 - £42,500 (Salary DOE) \n Shift: Monday to Friday - Double Days (Early and Lates) - 40 hours per week \n Job Role: \n We are seeking a Resident Engineer to join a leading materials handling business, based full-time at a key customer site. You will be responsible for servicing, maintaining and repairing forklift trucks and a range of other Material Handling Equipment (MHE), ensuring minimal downtime and excellent service delivery. \n Sector - Industrial Forklift/Vehicle Maintenance \n Non-Negotiable Requirements of Resident Engineer: \n\n • Must have hands on Servicing or Maintenance Experience\n\n Essential requirements of Resident Engineer: \n\n • Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles.\n, • Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics.\n, • Recognised Engineering Qualification.\n\n Desirable Requirements of Resident Engineer: \n\n • Full UK Driving License\n, • Minimum Level 3 Qualification in Engineering.\n\n The Resident Engineer will benefit from: \n\n • Full Training and Induction Scheme\n, • Company Pension Scheme\n, • Tools provided\n, • Machinery Specific training programmes.\n\n If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. \n For further details contact Stash Rowszar at Pioneer Selection \n As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. \n You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. \n \n

Your new companyAn exciting opportunity has arisen with a leading UK industrial and logistics organisation operating critical infrastructure across multiple sites. The business is investing heavily in its facilities, equipment, and people, providing long-term career opportunities within a highly skilled engineering environment. Your new roleAs an Electrical Engineer, you will be responsible for carrying out planned and reactive maintenance on a range of heavy plant, machinery, and specialist handling equipment. You will diagnose and resolve electrical faults, minimise downtime, and ensure all equipment remains compliant with current legislation and safety standards. Working on a 4-on, 4-off shift pattern (12-hour shifts), you will also have the opportunity to develop multi-skilled mechanical and electrical capabilities while working towards additional authorisations on LV and HV systems.What you'll need to succeed \n\n • Time-served Electrician with experience maintaining heavy plant, industrial machinery, or similar equipment.\n, • Strong fault-finding and diagnostic skills.\n, • Experience working within a fast-paced operational or manufacturing environment.\n, • Comfortable working at height and following safe systems of work.\n, • Committed to maintaining high health and safety standards.\n, • High Voltage and Three-Phase electrical experience would be advantageous.\n, • Full flexibility to occasionally support nearby operational sites when required.\n\n What you'll get in return \n\n • 26 days annual leave.\n, • Up to 10% matched pension contribution.\n, • Comprehensive training and development opportunities.\n, • Flexible benefits package including healthcare options, cycle-to-work scheme, retail discounts, and salary sacrifice benefits.\n, • Access to employee wellbeing and assistance programmes.\n, • The opportunity to work with cutting-edge industrial equipment and develop specialist engineering skills within a growing organisation.\n\n What you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Operations Manager What will you be doing? The Operations Manager is responsible for managing and developing the Operations and Fuel Handling teams to ensure safe, reliable, and efficient operation of the power generation facility. They are a key member of the site management team, ensuring operational performance, QHSE compliance, and delivery of contractual obligations in line with plant objectives. Summary of Responsibilities: Manage and lead the Operations team within a 24/7 power generation environment Ensure safe, efficient, and reliable plant operation in line with operational limits, OEM guidelines, and regulatory requirements Drive plant availability, reliability, and performance improvements through effective operational management Oversee operational routines, testing activities, and first-line maintenance activities within the CMMS system Ensure compliance with QHSE standards, environmental requirements, and site procedures Support the delivery of operational targets, production requirements, and contractual obligations Manage team performance, development, training, and competency requirements Work closely with Maintenance, Engineering, and Site Management teams to optimise plant performance Identify operational, process, and people challenges and implement improvement actions Support emergency response and provide operational leadership when required Manage operational budgets, cost control, and resource planning activities Maintain compliance with ISO9001, ISO14001, ISO45001, and relevant UK safety legislation Skills and knowledge required to succeed: Proven experience in Operations Management within the Power Generation sector, ideally within Energy from Waste (EfW), Biomass, Renewable Energy, or large industrial power plants. Strong background in managing operational teams, plant performance, QHSE standards, and maintenance coordination. Engineering qualification at HND level or above preferred. What do we offer? Permanent full-time position Competitive salary package Monday–Friday working schedule Additional benefits including healthcare, pension, life assurance, annual leave, and bonus opportunities * Potential for professional growth within the energy sector

Maintenance Manager What will you be doing? The Maintenance Manager is responsible for managing and developing the maintenance function to ensure the safe, reliable, and efficient operation of the power generation facility. They will oversee maintenance activities, engineering integrity, and asset performance, ensuring plant availability is maximised in line with safety, environmental, OEM, and industry best practice standards. Summary of Responsibilities: Manage and lead the Maintenance team, ensuring effective delivery of maintenance activities Develop and implement planned and preventative maintenance strategies for boilers, turbines, generators, and auxiliary systems Maximise plant availability, reliability, and efficiency through proactive maintenance management Manage CMMS systems, maintenance schedules, work planning, and performance reporting Coordinate outage planning, scheduling, and execution activities Provide technical support and engineering solutions to improve plant performance Investigate and report on plant failures, downtime events, and loss of generation incidents Manage critical spares, inventory levels, procurement activities, and supplier coordination Ensure maintenance activities comply with QHSE requirements, environmental permits, and company procedures Manage maintenance budgets, cost control, and resource planning Work closely with Operations, Engineering, and Site Management teams to optimise plant performance Support continuous improvement initiatives and long-term asset reliability strategies Skills and knowledge required to succeed: Strong experience in Maintenance Management within the Power Generation sector, ideally within Energy from Waste (EfW), Biomass, Renewable Energy, or large industrial plants. Engineering background in Mechanical, Electrical, or Marine disciplines preferred, with experience managing maintenance teams, rotating equipment, turbines, generators, and plant reliability programmes. What do we offer? Permanent full-time position Competitive salary package Monday–Friday working schedule Additional benefits including healthcare, pension, life assurance, annual leave, and bonus opportunities * Opportunity for professional growth within the energy sector

Senior Quantity Surveyor - Residential Groundworks Location - Liverpool Salary/Package - £45,000 - £75,000 + Excellent Benefits Package About the Company Our client is a leading civil engineering and groundworks contractor with an outstanding reputation for delivering high-quality infrastructure and groundworks packages across the North West. Working in partnership with many of the UK's leading housebuilders and developers, they specialise in residential developments, roads and sewers, foundations, drainage, highways, and associated civil engineering works. Through continued investment in their people, technology, and plant fleet, the business has established itself as a trusted delivery partner, recognised for its commitment to quality, safety, and delivering projects on time and within budget. As a result of continued growth and a strong pipeline of secured work, they are now looking to appoint an experienced Senior Quantity Surveyor to strengthen their commercial team. The Role As Senior Quantity Surveyor, you will be responsible for: Managing the commercial delivery of multiple residential groundworks projects from contract award through to final account Preparing and submitting applications for payment, valuations, variations, and final accounts Procuring and managing subcontractors and suppliers Producing accurate cost forecasts, CVRs, and commercial reports Monitoring project costs and ensuring commercial targets are achieved Identifying and managing commercial risks and opportunities Administering contracts and ensuring compliance with contractual obligations Working closely with operational teams to maximise project performance and profitability Building and maintaining strong relationships with clients, site teams, and key stakeholders Supporting the Commercial Manager with strategic commercial decisions and reporting The Ideal Candidate The successful Senior Quantity Surveyor will have: Proven experience as a Quantity Surveyor or Senior Quantity Surveyor within the groundworks or civil engineering sector Housing and residential groundworks experience is essential Previous experience working with residential developers or housebuilders Strong understanding of commercial management and contract administration Experience managing multiple projects simultaneously Excellent negotiation, communication, and stakeholder management skills A proactive and commercially driven approach Degree qualified in Quantity Surveying or a related commercial discipline would be advantageous What's on Offer Competitive basic salary of £45,000 - £75,000 Attractive benefits package Opportunity to join a leading North West groundworks and civil engineering contractor Long-term career progression within a growing and financially stable business Exposure to high-profile residential developments across the region Supportive and collaborative commercial team Opportunity to play a key role in the continued success of the business Apply: If you're interested in this opportunity, then please get in touch today with our Commercial Specialist, Mark Harris. Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDCOM

Plant Engineer -Company has over 40 years of experience -Competitve Salary -Overtime available

Job Title: Mobile Maintenance Technician (AMT) Location: Liverpool / Preston (Kirkby) Contract Type: Permanent Working Hours: 40 Hours Per Week Salary: £29,111.27 Total Salary, Overtime, Travel Time, 33 Days Holiday, Private Pension & Benefits - Including Private Health Care, Life Insurance, Employee Discounts An exciting opportunity has emerged for an experienced Mobile Maintenance Technician to join our company, working with one of our major UK supermarket clients. The role will involve carrying out non-technical repairs and minor PPM’s. You will also assist in carrying out planned and reactive maintenance, electrical, and mechanical plant works at various sites within the designated region. Key Responsibilities: Assist other City Technicians with any major or minor maintenance work. Complete all necessary PPM’s and reactive maintenance schedules within agreed timescales and to ensure all necessary paperwork is completed accurately and as required. Responding promptly and positively to service call requests from the Helpdesk and to assess the requirements of the job and carry out repairs as necessary. Prioritising and completing minor maintenance and repair work to agreed timescales. Ensuring all tools and equipment necessary to complete minor maintenance and repairs are available and serviceable at all times. Qualifications / Experience: Essential City & Guilds / NVQ trade qualification (Carpentry / Plumbing / Roofing) Previous experience in building maintenance within a commercial / retail environment Desirable but not essential: Ability to maintain and repair a range of equipment. Quality of repairs and maintenance. Speed and efficiency of work. The ideal candidate: Full driving license. Experience using a PDA system. * Carried out PPM and reactive maintenance within a similar retail environment

Contracts Manager – Flat Roofing Location: Merseyside Salary: Competitive (DOE) + Company Vehicle We are recruiting on behalf of a well-established flat roofing contractor for an experienced and proactive Contracts Manager with a proven background in managing flat roofing projects. This is an excellent opportunity for a commercially aware professional to oversee multiple flat roofing contracts from pre-start through to final completion, ensuring every project is delivered safely, on time, within budget, and to the highest standards of workmanship and client satisfaction. Key Responsibilities Manage multiple flat roofing projects from contract award through to completion. Plan, programme and coordinate all aspects of flat roofing works. Oversee site teams, supervisors and specialist flat roofing subcontractors. Ensure projects are delivered safely, efficiently, on programme and within budget. Manage labour, plant, materials and procurement for flat roofing contracts. Carry out regular site inspections to monitor workmanship, quality and compliance with specifications. Monitor project costs, valuations, variations and financial performance. Build and maintain strong relationships with clients, consultants, manufacturers and supply chain partners. Ensure all works comply with current health & safety legislation, manufacturer requirements and industry best practice. Produce progress reports, attend client meetings and resolve project issues proactively. Promote a culture of quality, safety and continuous improvement across all projects. Essential Experience & Skills Proven experience as a Contracts Manager within the flat roofing industry. Extensive technical knowledge of flat roofing systems, including: Single Ply Membranes Built-Up Felt Roofing Liquid Waterproofing Systems EPDM Roofing GRP/Fibreglass Roofing Green Roofing Systems Warm Roof and Inverted Roof Construction Strong understanding of roofing specifications, detailing, waterproofing principles and manufacturer installation requirements. Experience managing multiple live flat roofing contracts simultaneously. Excellent commercial awareness with the ability to monitor costs, variations and project profitability. Strong leadership, communication and organisational skills. Ability to build lasting client relationships and deliver exceptional customer service. Full UK Driving Licence. Essential Qualifications SMSTS CSCS IOSH or NEBOSH Relevant flat roofing qualifications, manufacturer accreditations or NVQ in Roofing Occupations (desirable). What's on Offer Competitive salary dependent on experience. Company vehicle. Long-term career opportunity with an established and growing flat roofing specialist. Supportive management team and professional working environment. Opportunity to manage a diverse portfolio of high-quality flat roofing projects across the commercial, industrial and public sectors

Speedy are the UKs leading hire provider with the widest range of tools, specialist hire equipment, plant and support services everything for every job!Job Title - Hire ControllerLocation - PooleWorking Hours - Mon - Fri, 07:30 - 17:00 - 42 hours per weekBased in the depot, the Hire Controller is a vital part of operations on the front line of sales and customer service. Relationship building is the key to success, as the Hire Controller coordinates the entire hire process from taking the order through to delivery and collection, liaising with every part of the depot to ensure the needs of the customer are met and that theyre satisfied with our service.On a day-to-day basis, you can expect to be desk-based, working directly with the other departments, liaising regularly with stock teams, drivers and engineers to ensure minimal delay in fulfilling the needs of the customer with readily available equipment and close contact.For us to help you on your journey to success, heres what youll need:Strong organisational skillsStrong communication skills both verbally & writtenAdaptabilityCommitment to learn and developDriving licensePrevious experience working within the hire industry or similar sales or operational roleAbility to support your business unit/team to deliver our ESG Strategy Decade to Deliver.What we offer:26 days holiday (plus bank holidays)Life assurancePension SchemeCanteen facilities95% discount across the Speedy brandOpportunities for training, development and career progressionVoluntary Health Cash PlanMy Staff Shop: discounts and offers for shopping etc. across many suppliersGreen Commute Initiative: Work scheme for cyclingPAM Employee Assistance Program (EAP): Offers free and confidential support and counselling to help you through matters such as wellbeing, divorce, legal, and financial managementSpeedy operates an industry leading Work Life Balance initiative, demonstrating our commitment to reducing core contracted hours, supporting colleague wellbeing, and identifying more balanced work patterns for our colleagues which is a huge step in realising our ambition of putting our People First. Talk to us about a range of hybrid and flexible working arrangements to suit your needs including flexible start/finish times, shorter days, term time hours and job share opportunities.Speedy offer a Career Line of Sight which enables a detailed understanding of the route to progression and growth within the Speedy Group.Please be aware Speedy reserves the right to close our vacancies earlier than the listed date if we have received a high level of applications. We would recommend that if you wish to be considered that you complete the application as promptly as possible.Please be aware that some roles withinThe Speedy Group UK&I may require a DBS, Credit or Security Clearance Check.The Speedy Group is an equal opportunity employer where we embrace diversity in all its forms and fostering an inclusive environment for all people to do the best work of their lives with us.Link below to our policies in line with our ESG Governance.https://www.speedyservices.com/esg/governanceAll applicants will be considered for employment without attention to ethnicity, religion, sexual orientation, gender identity, family or parental status, national origin, veteran, neurodiversity status or disability status. All roles within The Speedy Group require proof of right to work in the UK by the start of employment.TPBN1_UKTJ

Job Title: Mobile Maintenance ElectricianLocation: Central LondonPay Range/details: £44,576.70 per annum (salary including on call standby 1:4)Contract Type: PermanentOmega are supporting a leading facilities management provider in the recruitment of an experienced Maintenance Electrician to join the team to work on a leading supermarket contracts. The role will involve maintaining and repairing a range of electrical, mechanical plant and equipment in retail outlets, undertaking regular planned store visits to complete reactive, PPMs and minor repairs as requested by the customer (including non-electrical).Key Responsibilities - Mobile Maintenance ElectricianComplete the Planned Preventative Maintenance (PPM) schedule within agreed timescales and to ensure all necessary paperwork is completed accurately.Deliver reactive and planned catering and bakery equipment maintenanceConduct emergency lighting and fire alarm tests and repairs.Complete general repairs and maintenance to customer sitesIdentify non-repairable faults in plant and machinery and promptly advise the Line Manager of findings, with recommendations regarding suitable replacement.Q ualifications & Requirements - Mobile Maintenance ElectricianNVQ Level 3/City and guilds 236 Part 1 + 2 or equivalent in electrical installation or maintenance.City and Guilds 18th Edition.AM2 / 2391What we can offer - Mobile Maintenance Electrician£39,093.85 per annum (including standby 1:4) + overtime + travel time.Travel time paid after half hour each way.OT paid at 1.5x Mon - Fri / 2x Sat-Sun.Company pension scheme (matched up to 5%).Private healthcare (BUPA).Various employee discount schemes.For more information on this role, please contact Michael Farrell on 01453 829768 or send a copy of your CV toCandidates who are currently a Mobile Maintenance Electrician, Building Services Engineer, Commercial Electrician, or Multiskilled Maintenance Engineer may be suitable for this position.For details of other opportunities available within your chosen field please visit our websiteOmega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

Bulk SupervisorAre you seeking a role in which you can develop your skills and experience and progress your career further into a supervisory role? Are you excited by the opportunity to lead and support other supervisors whilst also maintaining a hands-on role? We are seeking a Bulk Operations Supervisor to join our team at the Port of Liverpool and help us keep the world moving!Your RoleIn this role, you will oversee the safe and efficient operation of bulk handling and terminal operations, ensuring all activities are completed in line with company procedures and safety standards. You will be a working supervisor, responsible for your own team, coordinating their daily operational tasks, supervise loading and unloading activities, monitor plant and equipment performance, and ensure incidents, damages, and maintenance requirements are reported promptly. You will also support the achievement of operational targets while promoting a strong safety-first culture.Appointment to this role will be subject to the successful completion of an enhanced DBS check.What you'll bring You have experience operating material handling plant and equipment, ideally in a port environment, but waste handling or similar would be considered.You are proficient using Microsoft Office packages.You have experience leading or supervising a team.You hold GCSEs in English and Maths (or equivalent).Experience operating Harbour Mobile Cranes, Wheel Loaders and Skidsteers desired.Experience with SCADA systems and continuous ship unloaders desired but not essentialExperience within rail operations, port environments and vessel operations desired but not essentialAbility to multi task and adapt in a fast paced environment.Ability to communicate clearly in written and verbal format to a spectrum of people.A strong team player with the ability to work collaboratively with colleagues, build positive relationships, and contribute to the achievement of team goalsA full valid Driving Licence is essential for this role.Who are weAlready one of the UK's leading port and logistics companies, with a turnover in excess of £500 million, we are planning substantial capital investment over the next 5 years to achieve our vision of becoming the UK's leading port operator. We have ambitious plans to grow and transform the supply chain to benefit our customers. Our investments are decarbonizing our operations, which in turn is helping us work towards our goal of having Net Zero Port Operations by 2040. Much of our success depends on our unrivalled facilities and technology. But in our sector, it comes down to having the right talent to enable our organisation to grow.What we can offer youIn addition to a competitive salary, we have a strong track record of developing our people to expand their skills and experience and develop their careers. Valuing and rewarding our workforce is important to us which is why we offer a fantastic range of flexible benefits to choose from, such as: Up to 10% Matched Contribution PensionPeel Ports Flexible Benefits including salary sacrifice car scheme, healthcare cash plans, Cycle2Work Scheme, Critical Illness insurance, Gym Membership Scheme, Retail Vouchers, plus more!Commitment to learning and personal development - Last year we supported over 50,000 hours of training and personal development!We promote good physical and mental health and can provide additional support to colleagues via our Employee Assistance Programme when requiredIf you believe you have the skills and experience we are seeking and you want to join a thriving and ambitious place to work, we'd really like to hear from you!TPBN1_UKTJ

Company description:Vitaflo (International) LimitedFor more than 25 years, Vitaflo has developed innovative specialised clinical nutritional products for inherited metabolic disorders, pediatric?kidney disease, and specialised diets such as the ketogenic diet.Vitaflo products offer patients choice, flexibility, and convenience. We combine the latest medical research, together with insights on changing modern lifestyles to best support patients in the compliance of restrictive therapeutic diets.Vitaflo continues its mission of Enhancing Lives Together with research and development at the heart of what we do.Job description:Founded in 1997, Vitaflo develops specialised clinical nutrition products for patients with inherited metabolic disorders, paediatric kidney disease and those requiring specialist diets, including the ketogenic diet. With a global presence, our research and innovation are driven by the needs of the patients we serve.Behind our products is a dedicated and collaborative team, united by a shared passion to make a meaningful difference to patients lives. This dedication is reflected in our people90% of employees said in our 2025 survey that they are proud to work at Vitaflo.Our mission, Enhancing Lives Together, sits at the centre of our business, guiding our decisions, our innovation, and our commitment to patients and their families.Quality Assurance ManagerWe are currently looking to recruit aQuality Assurance Manager to work at our Liverpool Headquarters on afull time,permanent contract. Reporting into the Quality Manager, you will lead and develop the Quality Assurance Team, ensuring our products and manufacturing processes consistently meet regulatory, customer, and internal quality standards. You will provide quality oversight across production, warehousing, and our co-manufacturing network, maintaining a strong culture of compliance while driving continuous improvement across the supply chain. You will be responsible for quality assurance activities including non-conformance management, customer complaints, quality investigations, and the effective management of co-manufacturer quality relationships, helping to ensure the highest standards of product quality, food safety and regulatory compliance.What will you do?As the Quality Assurance Manager, your main responsibilities will consist of the following:Manage and lead direct reports to achieve the operational goals of the department and driving growth through individual development plansPromote a strong quality culture across the department and wider business through quality awareness, accountability and continuous improvementLead investigations into non-conformances, customer complaints and adverse events using structured root cause analysis, ensuring timely and effective resolution.Monitor key quality assurance parameters and trend data to identify risks and drive performance of suppliers and co-manufacturers whilst maintaining strong relationshipsAct as HACCP Team Leader for the Glycosade facility and pilot plant, ensuring robust food safety systems and complianceDrive GMP excellence through auditing, ensuring compliance, identifying opportunities for improvement and delivering timely closure of corrective actions.Manage site quality assurance programmes, ensuring effective oversight of allergen management, Mandatory Allergen Declarations (MADs), pest control, and other quality compliance processes to maintain product integrity and regulatory complianceOversee the approval of suppliers and raw materials, ensuring compliance with food safety, quality and regulatory requirements.Support business readiness for external audits including ISO9001, FSSC22000 and FDA audits.Provide technical quality support for new products, process changes and other change management activitiesSupport in the development continuous improvement of quality systems, policies and procedures across the business.Who are we looking for?EssentialUniversity Graduate (preferred Microbiology, Chemistry or Food Sciences related disciplines) or equivalent experienceFlexibility for frequent travel and at short notice when requiredProven experience in leading, motivating and developing a teamStrong knowledge of Quality Management Systems (QMS), GMP, HACCP and FSSC 22000 requirements.Experience leading quality investigations and root cause analysisExperience managing customer complaints, adverse events , non-conformances and quality assurance processes within a manufacturing environment.Excellent organisational skills with the ability to prioritise and manage multiple activities.Strong communication and stakeholder management skills, with the ability to influence at all levels of the business.Good understanding of various manufacturing technologies, such as dry powder blending, can/sachet filling, aseptic liquid processing, infant nutrition requirements, and zoningDesirableKnowledge of continuous improvement methodologiesAuditing Experience (Supporting or Leading)Familiarity with data analysis and reporting tools such as Power BI.Understanding of validation activities (cleaning, heat treatment, shelf-life, verification programmes)What we offer?Competitive salary25 days annual leave (pro rata for part time) plus bank holidays and Christmas shut downDiscretionary bonus scheme (subject to qualifying period)Gym membership/allowance (subject to qualifying period)Employer pension contribution (3% rising to 5% subject to qualifying period then matched to a maximum of 10%). Employee minimum contributions applyPrivate healthcare (subject to qualifying period)Volunteering opportunitiesCycle to work scheme (subject to qualifying period)At Vitaflo (International) Ltd, our values are rooted in respect - for our employees, our customers and our patients. That's why championing diversity and inclusion is so important to us; when we embrace different perspectives and give everyone the chance to be the best they can be, we can think in new, creative ways that grow and enhance our business. We are committed to equal opportunity for all, and we may collect relevant anonymized data for monitoring purposes during our candidate registration process.TPBN1_UKTJ

Maintenance Technician Location: Liverpool (Port Environment) Salary: £42,000 + Overtime Type: Full-time, Permanent The Opportunity An established and well-respected organisation operating within a busy industrial and port environment is seeking a skilled Maintenance Technician to join its growing engineering team. This role plays a key part in ensuring the reliability and performance of heavy mobile plant and operational machinery, supporting business-critical operations on site. Offers a fantastic work culture and plenty of future opportunity. Key Responsibilities Carry out maintenance, repair, and overhaul work on heavy mobile plant Diagnose and resolve mechanical, hydraulic, and diesel-related faults Strip down and rebuild machinery components Interpret and work from technical drawings and manuals Maintain accurate records using digital systems and tablets Support operational efficiency by minimising equipment downtime Essential Experience Proven experience in a similar maintenance or engineering role Strong understanding of: Hydraulics Mechanical systems Diesel engines Ability to read and interpret technical drawings Strong problem-solving skills with the ability to work independently IT literate and comfortable using digital tools Full UK driving licence Desirable Experience Fault finding at component level (hydraulics) Knowledge of 3-phase electrics Experience with lathes, milling machines or other workshop equipment Background in heavy industry, recycling or port operations Working Environment Busy, hands-on operational site Established team with strong technical knowledge Supportive environment with structured onboarding and mentoring Opportunity to contribute ideas and improve processesThis role would suit someone confident, proactive and comfortable working as part of a close-knit team in a demanding but rewarding environment. Package & Benefits Basic salary of approximately £42,000 (based on £18.80 per hour) Overtime available (not guaranteed) 25 days annual leave plus bank holidays Pension scheme (auto-enrolment after 3 months) Health cash plan following probation Fully funded travel and accommodation if required for other UK sites Additional Information Based full-time on site in Liverpool Participation in an on-call rota during peak operational periods Potential future travel to other UK locations as required Why Apply This is an opportunity to join a stable, growing business where engineering is central to operations. The role offers long-term prospects, exposure to a wide range of machinery, and the chance to be part of a team that values reliability, problem solving, and continuous improvement. Next Steps If you are an experienced maintenance technician looking for a new challenge within a dynamic industrial environment, please apply or get in touch to discuss further. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Job Title: Plumber / Pipefitter Location: Liverpool, Wirral & Cheshire Rate: £25 per hour Hours: Full-time hours available Duration: Summer works MEP Technical Talent are currently recruiting for experienced Plumbers / Pipefitters to work on a number of school refurbishment projects across Liverpool, Wirral and Cheshire. The projects will involve mechanical installation works as part of planned summer programmes, working alongside established M&E contractors. Duties will include: Installation of copper and screwed pipework Plant room installations Heating systems Domestic services Sanitary ware installation General commercial plumbing works Working from drawings Requirements: Previous commercial plumbing / pipefitting experience Valid CSCS / JIB Skills Card preferred Own tools Ability to work independently and as part of a site team Experience working on schools, commercial projects or similar would be beneficial What’s on offer: £25 per hour Local projects across Liverpool, Wirral & Cheshire Summer work available Weekly payments * Immediate starts available

Preventative Maintenance Engineer + £39,000 Basic + Benefits + Industrial Manufacturing + Company with Strong Heritage + Liverpool + Career progression. Only 3 years Mechanical experience required with NVQ Level 3 or Equivalent Company We are recruiting on behalf of a well-established and growing manufacturing business that operates a highly automated industrial facility. The organisation is committed to investing in its people, equipment and technology, with a strong focus on engineering excellence, continuous improvement and maintaining the highest standards of safety, reliability and operational performance. This is an excellent opportunity to join a collaborative engineering team where innovation and proactive maintenance are at the heart of the operation. Role As a Predictive & Preventative Maintenance Engineer, you will play a key role in improving the reliability, safety and performance of a wide range of mechanical and process equipment. Working as part of the engineering team, you will deliver planned preventative maintenance, carry out fault finding and repairs, and develop predictive and condition-based maintenance strategies to minimise downtime. You will utilise techniques such as vibration analysis, thermography and oil analysis, while contributing to continuous improvement projects, root cause investigations, equipment standardisation and maintenance planning. The role also involves working with CMMS systems, supporting process automation and collaborating with production and engineering colleagues to optimise plant performance. Person We are looking for a mechanically qualified engineer (NVQ Level 3 or equivalent) with at least three years' experience in a manufacturing or process environment. You will have strong knowledge of mechanical maintenance, reliability engineering and condition monitoring techniques, with experience of pumps, drives, conveyors and fault finding on industrial equipment. Familiarity with CMMS systems, RCM, FMEA and PLC-controlled machinery is essential, while experience with SCADA, SQL, AutoCAD or process automation would be advantageous. You will be a proactive problem solver with excellent communication skills, a commitment to safe working practices and a passion for driving continuous improvement and engineering excellence. To apply for this career opportunity please contact Matt Martin at Russell Taylor on (phone number removed) or email (url removed) Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Mechanical Project ManagerLocal Government Location: Liverpool Sector: Transport, Infrastructure & Operational Assets Contract length: 6 months, likely to extend This Local Government is seeking an experienced Mechanical Project Manager to support the delivery of mechanical building services and infrastructure projects across our diverse and safety‑critical estate. This is a unique opportunity to work on essential operational assets including Mersey Tunnels, bus depots, ferry terminals, and wider transport facilities that keep the region moving. 🔥 About the Role You will lead and coordinate mechanical works across a wide range of operational buildings and transport environments. This includes managing projects involving: Heating systems Ventilation and cooling Pumps and pipework Water systems Fuel systems Drainage interfaces Plant replacement, refurbishment and wider mechanical upgradesYou will oversee the full project life cycle, including: Developing technical scopes and briefs Reviewing and challenging mechanical designs Managing consultants and contractors Coordinating surveys and investigations Overseeing site delivery in live operational environments Ensuring all works are compliant, maintainable and operationally aligned⭐ What You'll Bring We're looking for a technically strong and operationally aware Mechanical Project Manager with: Deep understanding of mechanical building services Knowledge of statutory compliance and safety requirements Experience in planned maintenance, life cycle replacement and asset management Awareness of energy efficiency and decarbonisation principles Strong contractor and consultant management skills Ability to manage costs, programmes and risks Experience delivering works in complex, live, safety‑critical environments🌍 Why Join the Combined Authority?You'll be part of a team delivering essential improvements to the infrastructure that underpins Liverpool's network. This role offers exposure to a wide range of unique assets and the chance to contribute to long‑term investment programmes that directly benefit residents, businesses and communities. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Are you a people-focused QA food manufacturing professional who loves coaching, mentoring, and building a true quality culture? The Oval Partnership is currently supporting a B-Corp accredited, specialist food and nutrition business to recruit a Quality Assurance (QA) Manager. Reporting to the Head of Quality, the QA Manager role is split between people development, onsite operational excellence, and international 3rd party co - manufacturer management; ensuring effective Root Cause Analysis and investigations are completed in relation to customer complaints and non-conformances. Key Responsibilities of the Quality Assurance (QA) Manager: Team Leadership: Manage, mentor, and develop a team of three direct reports. Onsite QA & Food Safety: Act as the HACCP Team Leader for the Liverpool production plant, driving GMP excellence and auditing standards. Co-Manufacturer Management: Oversee quality relationships across European co-manufacturers, leading non-conformance and complaint investigations using structured RCA. Industrialisation Support: Ensure QA presence at trials and 1st/2nd production runs. Audit Readiness: Support the wider business in maintaining readiness for internal and external audits What We Are Looking For: A Natural Coach: Proven experience in leading, motivating, and developing individuals. Technical Expertise: Strong working knowledge of QMS, GMP, HACCP, and FSSC 22000 requirements within a food manufacturing environment. Problem Solvers: Experience leading quality investigations and utilising structured Root Cause Analysis. Travel Flexibility: Willingness and availability to travel internationally (primarily Europe) at relatively short notice, typically at least once a month, to attend trials and audit co-manufacturers. Education: A university degree (Microbiology, Chemistry, or Food Sciences preferred) or equivalent industry experience. Benefits include: Bonus scheme. Hybrid working with flexible hours 25 days annual leave plus bank holidays and a Christmas shutdown. Excellent pension scheme (up to 10% employer matched contribution). * Private healthcare

Mobile Electrician role working in LiverpoolThis is a permanent, full-time position (40 hours per week) offering a £40,000 salary plus a strong benefits package.What youll be doing:Planned and reactive electrical maintenanceFault finding and minor installationsIssuing permits and following Safe Systems of WorkKeeping paperwork and CAFM systems up to dateEnsuring plant and equipment run efficientlyYoull be representing Equans , so professionalism and high safety standards are essential.What were looking for:NVQ Level 3 + AM218th EditionLV AuthorisedFM experienceSupervisory experienceFull UK driving licenceComfortable working to deadlinesWhats on offer:24 days holiday (+ bank holidays)Life cover (1.5x salary)Retail & gym discountsTraining and development opportunitiesEmployee wellbeing supportTPBN1_UKTJ

Factory Operative Pay: £35,000 Location: Liverpool, L34 Hours: 08:00-17:00| Monday-Friday About the Role An exciting opportunity has arisen to join an innovative and rapidly growing manufacturing business operating within the biotechnology sector. We are seeking a Fermentation / Chemical Process Operator to support production activities, ensuring safe, efficient, and compliant operation of fermentation and processing equipment. This role offers the chance to work with cutting-edge technologies while contributing to the scale-up of sustainable manufacturing processes. Key Responsibilities Operate fermentation, processing, and manufacturing equipment in line with standard procedures. Monitor process performance and maintain product quality standards. Clean, sanitise, and maintain production equipment and vessels. Complete batch records and production documentation accurately. Carry out routine sampling and support quality activities. Troubleshoot operational issues and escalate where required. Maintain high standards of health & safety, GMP, hygiene, and housekeeping. Support continuous improvement and process optimisation initiatives. Skills & Experience Essential: Degree, HNC/HND, or equivalent qualification in Chemistry or a related scientific discipline. Strong understanding of chemical and factory safety. Experience or knowledge of laboratory, chemical, or manufacturing processes. Excellent attention to detail and record-keeping skills. Strong communication and problem-solving abilities. Ability to work effectively in a fast-paced team environment. Willingness to work rotating shifts as operations expand. Adaptable and eager to learn. Desirable: Experience within biotechnology, fermentation, chemical, food & beverage, pharmaceutical, or bioprocessing environments. Previous experience operating production plant or automated process equipment. Food or beverage manufacturing. Pharmaceutical manufacturing. What's on Offer £35,000 salary. Career development opportunities within a growing manufacturing organisation. Collaborative and innovative working environment. Opportunity to work with pioneering biotechnology and advanced manufacturing processes. If you think you are suited to this role and would like the opportunity to progress within a growing company, then apply today! Benefits: Company pension Free parking * On-site parking

Vacancy - Electrical Shift TechnicianAre you a Technician with excellent troubleshooting and fault finding skills? Are you seeking a role which offers you the opportunity to develop your skills by working on a range of equipment, including state of the art Cranes? We are seeking an Electrical Shift Technician to join the team within the Container division, at the Port of Liverpool and help us keep the world moving! This role is working on a 4 on 4 off days and nights shift pattern.Your RoleWorking with a team of Technicians, you will carry out reactive maintenance and planned preventative maintenance in a safe and efficient manner for all plant and equipment across Terminals One and Two including Cranes, CRMGs and Straddle Carriers. You will attend and fix machine breakdowns during operations in a safe and efficient manner, reporting parts and materials needs to the Engineering Shift Manager promptly. You will demonstrate commitment to multi-skilled activity where appropriate, completing required training as and when required.You will ensure the reliability, availability and safe performance of equipment by timely delivery of the Preventative Maintenance Plan, identifying spare parts needs and liaising with relevant internal teams to ensure stock availability.Driving and delivering a safe working culture, you will work to safe systems of work for all activities, ensuring SOPs are following and Risk Assessments carried out and reviewed.What you'll bringYou will have: A strong engineering skillset, with an electrical bias.You will have a firm grasp of modern maintenance strategies and working knowledge of controls systems and principles, including PLCs.Qualified to a minimum ONC (or equivalent) in a relevant discipline, you will have an understanding of Electrical Circuit diagrams and be willing to multi-skill where deemed necessary.Experience of Motors and Variable Speed Controllers is necessary, along with a commitment to carrying out activities in the safest and most efficient manner.Previous experience on Container Handling equipment, particularly Container cranes, is advantageous but not essentialA full valid driving licence is required for this role.Who are we?Already one of the UK's leading port and logistics companies, we are planning substantial capital investment over the next 5 years to achieve our vision of becoming the UK's leading port operator. We have ambitious plans to grow and transform the supply chain to benefit our customers. Our investments are decarbonizing our operations, which in turn is helping us work towards our goal of having Net Zero Port Operations by 2040. Much of our success depends on our unrivalled facilities and technology. But in our sector, it comes down to having the right talent to enable our organisation to grow.What we can offer youIn addition to a competitive salary, we have a strong track record of developing our people to expand their skills and experience and develop their careers. Valuing and rewarding our workforce is important to us which is why we offer a fantastic range of flexible benefits to choose from, such as: 26 Days Annual LeaveUp to 10% Matched Contribution PensionPeel Ports Flexible Benefits including salary sacrifice car scheme, healthcare cash plans, Cycle2Work Scheme, Critical Illness insurance, Gym Membership Scheme, Retail Vouchers, plus more!Commitment to learning and personal development - Last year we supported over 50,000 hours of training and personal development!We promote good physical and mental health and can provide additional support to colleagues via our Employee Assistance Programme when requiredIf you believe you have the skills and experience we are seeking and you want to join a thriving and ambitious place to work, we'd really like to hear from you!TPBN1_UKTJ

Your new company An exciting opportunity has arisen with a leading UK industrial and logistics organisation operating critical infrastructure across multiple sites. The business is investing heavily in its facilities, equipment, and people, providing long-term career opportunities within a highly skilled engineering environment. Your new role As an Electrical Engineer, you will be responsible for carrying out planned and reactive maintenance on a range of heavy plant, machinery, and specialist handling equipment. You will diagnose and resolve electrical faults, minimise downtime, and ensure all equipment remains compliant with current legislation and safety standards. Working on a 4-on, 4-off shift pattern (12-hour shifts), you will also have the opportunity to develop multi-skilled mechanical and electrical capabilities while working towards additional authorisations on LV and HV systems. What you'll need to succeed Time-served Electrician with experience maintaining heavy plant, industrial machinery, or similar equipment. Strong fault-finding and diagnostic skills. Experience working within a fast-paced operational or manufacturing environment. Comfortable working at height and following safe systems of work. Committed to maintaining high health and safety standards. High Voltage and Three-Phase electrical experience would be advantageous. Full flexibility to occasionally support nearby operational sites when required.What you'll get in return 26 days annual leave. Up to 10% matched pension contribution. Comprehensive training and development opportunities. Flexible benefits package including healthcare options, cycle-to-work scheme, retail discounts, and salary sacrifice benefits. Access to employee wellbeing and assistance programmes. The opportunity to work with cutting-edge industrial equipment and develop specialist engineering skills within a growing organisation.What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Control & Automation Engineer Competitive salary & package includng: bonus scheme, life insurance, private medical, EV charging and generous pension Are you an Automation, Control Systems or EC&I Engineer who thrives on solving complex technical challenges and driving continuous improvement? We are recruiting for successful, global manufacturer at a state-of-the-art manufacturing facility in Liverpool. With significant recent investment in automation, you will be supporting a growing range of advanced manufacturing technologies including automated filling systems, high-speed rotary equipment, robotics and automated material handling solutions. The Role Working closely with Engineering, Production and Maintenance teams, you will lead automation upgrades, system integration projects, troubleshooting activities and continuous improvement initiatives across a highly automated production environment. You will: Support and develop PLC, HMI, SCADA and control systems across the manufacturing operation Drive continuous improvement and optimisation of automated production equipment Lead automation upgrades and integration of new technologies Provide technical support and root cause analysis for complex plant issues Improve reliability, performance and efficiency of existing systems Collaborate with equipment suppliers, integrators and engineering partners Mentor and coach EC&I Technicians, supporting technical development across the teamRequirements: We are keen to speak with engineers who combine strong automation expertise with a practical manufacturing mindset. Experience gained within: Chemical manufacturing Process industries Pharmaceutical production Food & beverage FMCG Advanced manufacturing Packaging or automated production environmentsExperience/Skills: Strong knowledge of industrial automation and control systems in manufacturing Experience working with PLC-controlled manufacturing equipment Knowledge of instrumentation, process control and industrial electrical systems Experience supporting automated production lines and robotic systems A structured approach to fault finding and root cause analysisWhy Join? This is a rare opportunity to join a business who continue to invest heavily in technology, automation and engineering excellence. You will be joining a company that is: Financially stable and globally recognised Investing heavily in manufacturing technology and automation Committed to continuous improvement and innovation Large enough to provide genuine career progression opportunities Small enough for your contribution to be visible and recognised What's on Offer? Competitive salary Annual discretionary bonus 25 days holiday plus the option to buy and sell additional days Private medical insurance Life assurance Enhanced pension with significant employer contributions Green car scheme Free EV charging onsite Cycle to Work scheme Additional health and wellbeing benefits Ongoing training and professional development Interested? If you're an Automation Engineer, Controls Engineer, EC&I Engineer or Industrial Automation Specialist looking to play a key role in the continued evolution of a highly automated manufacturing facility. Apply Now! At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes

JG286 – Resident Forklift Engineer Location: Liverpool Salary: £30,000 - £37,500 + Shift allowance Shift pattern: the shifts are: (Apply online only) hrs,(Apply online only) hrs, (Apply online only) hrs Overview: First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients. The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction. Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: Servicing and repair of forklift trucks and other lifting equipment. Carrying out routine maintenance. Checking oil and fuel levels. Checking all related hoses and connections. Steering and brake checks. Basic electrical checks – brake lights etc. Liaising with customers regarding their individual requirements. Submit accurate parts requisition information to Head Office. Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: A good mechanical engineering background is essential. Customer focused. Ability to work as part of a team or on an individual basis where required. Excellent time management skills Excellent communication skills – both verbal and written. Experience with forklift trucks, military, agricultural or plant equipment is highly desirable. Full UK driving licence. Location: Liverpool Salary: £30,000 - £37,500 + Shift allowance

Smiths Equipment Hire Ltd are the Northwest's Largest Independent Equipment Hire company with 19 Hire It Centres located across the region.We supply all types of customers in all types of business, specialising in many types of equipment, including; plant and machinery to the construction and industrial sectors. A large fleet of delivery vehicles are able to supply almost any type of equipment that is requested.As a Workshop Engineer you must:Have experience with repairing, servicing and maintaining small tool equipmentHave the ability to work under pressure and on own initiativeBe reliable and have aflexible proactive approachHave good literacy, numeracy and computer skillsHave the ability to diagnose faults on associated small tool hire equipmentHave experience with 2/ and 4/ petrol enginesExperience with Diesel enginesHave a full UK clean manual driving licenceHave good diagnostic skillsHave good customer service skillsThe main Responsibilities of a WorkshopEngineerare:Repairing, servicing and maintaining small tool equipment in the workshop.Must be able to diagnose faults on a variety of Small tool equipmentMaintain and widen product knowledgeCarry out other tasks and duties as requiredBe able to liaise with people at all levelsMaintain Health and Safety to Company StandardsWill be require to attend breakdowns so a full UK Manual Driving Licence essential.Working hours: Monday to FridayBenefits what we offer you- Salary: Depending on experience- 25 Days plus statutory holidays (33 days in total)- An extra 2 days holiday after 5 years service- Weekly pay- FREE tool hire for all employees - Excluding consumables and delivery- Group Life Cover is provided at three times your annual salary- My Wellbeing Services- Employee Referral Scheme- Pension scheme- Full uniform provided- Discounted personal legal servicesTPBN1_UKTJ

Lead Materials Buyer Our client is a growing construction and refurbishment contractor delivering projects across the education, healthcare, commercial, residential, and public sectors. Acting as Principal Contractor, they deliver a diverse portfolio of refurbishment, fit-out, and construction projects typically ranging from £100k to £2m in value. As the business continues to grow, they are looking to recruit a Lead Materials Buyer to take ownership of the buying function for their Contracts Division. This is a hands-on, office-based role offering the opportunity to make a real impact by leading procurement across the business, driving improvements to processes and best practice, and helping shape the future growth of the department. Key Responsibilities Lead and manage the buying function for the Contracts Division. Procure materials and plant for projects across the UK, ensuring best value, quality, and timely delivery. Negotiate with suppliers to secure competitive pricing and favourable commercial terms. Develop and implement buying processes, procedures, and best practice across the business. Build strong working relationships with site teams, commercial staff, and the accounts department to improve communication and efficiency. Monitor supplier performance and identify opportunities for cost savings and continuous improvement. * Report directly to the Commercial Director and provide updates to the Main Board. Salary & Package A competitive salary and benefits package is on offer, alongside the opportunity to build and lead a growing buying function with genuine long-term career progression into senior management. Apply If you're interested in this opportunity, please apply with a copy of your CV or get in touch with our Commercial Specialist, Jane Fairhurst

Role Type: ContractSalary: £55 - £60 an hour (inside IR35)Shift Pattern: 4 x 4 shift working (12 hours), 2 days and 2 nights on rotation (42 hour week)Location: - LiverpoolWe are currently recruiting for a Maintenance Engineer with our client based in Liverpool.Are you interested in.Proactive maintenance and inspection work AND proactive continuous improvementExposure to a rich variety of engineering equipment and processesAutomation experience; exposure to cutting-edge equipment and machineryA collaborative relationship between engineers and operationsCareer progression routes - into supervisor and management or cross-functionallyJoining a multi-site business that places high emphasis on employee supportWhat you'll be doing:Advise and assist the design, installation and commissioning of projects and small initiativesEnsure that plant and equipment systems perform to manufacture product efficiently to high quality standardsAssist with training and support of non-electrically biased engineers and electrical engineers wishing to improve their knowledge of automated machinerySupport the engineering and manufacturing functions ensuring maximum utilisation of engineering equipment to achieve KPIs and optimal line efficiency within the company safety, quality & environmental policiesContribute to and help implement continuous improvement, to enhance quality, safety, efficiency and waste reductionHelping to transform the engineering maintenance strategy from a breakdown philosophy to a Right First Time, proactive philosophyWhat we need from you:Recognised Engineering Apprenticeship, ONC/HNC or equivalent qualification in engineering for example - Level 3 Electrical/electronic engineering or similarPrevious experience of automated manufacturing environments. A working understanding of Mechanical, Electrical and Electronic technical manuals & drawingsHow to Apply:If this role sounds of interest to you then please feel free to reach out to Charlie Boulton using the details below:01453 852544Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

Mobile Electrician Liverpool £40,000 Brief Mobile Electrician needed for a well-known large Facilities Management organisation based in Liverpool who are looking to employ an experienced and well-rounded Mobile Electrician that takes pride in their work. This is a role for a proven LV Authorized 18th edition qualified Electrical Technician. Supported by a strong operational team, the focus is developing, maintaining and improving the Electrical systems across the Merseyside Fire & Rescue Service estate. Benefits Salary: £38,000 - £40,000 per annum 24 day's holiday Variable annual bonus based 5-15% Pension Plan Career Progression What the role entails: Some of the main duties of the Mobile Electrician will include: Carry out the defined planned maintenance regime for all contractual obligations within the contract Ensure Safe Systems of Work (SSoW) are in place. Issuing of relative working permits. Carry out repairs, reactive maintenance and minor installation works on plant. Attend, diagnose and repair faults having due regard to customer care in this specific environment. Carry out proactive plant monitoring activities to ensure efficient utilisation of plant and equipment Interrogation of operational information systems to support daily operations as well as fault diagnosis Complete the relevant paperwork and report diligently. Any other relevant duties that may be required, some of which may be outside normal working hours. What experience you need to be the successful Mobile Electrician: Full, clean UK driving licence NVQ Level 3 Technical Certificate with the NET AM2 certificate Require candidate to have prior experience supervising a team. Must be comfortable working to tight deadlines and being proactive managing their workload IT Literate due to majority of work will be office based. Including Microsoft Office, Word and Excel. Must have the balanced ability to think clearly in extreme circumstances Experience of using a CAFM system Good experience and track record in working in Facilities Management Good knowledge of building services and legislation This really is a fantastic opportunity for a Mobile Electrician to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! INDALL Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website

Maintenance Lead Competitive salary & package: bonus scheme, life insurance, private medical, EV charging and generous pension Are you an experienced Maintenance Leader/Manager looking to make a real impact within a world-class manufacturing environment? Due to a recent promotion, we are currently recruiting for a successful global manufacturer at their state-of-the-art facility in Liverpool. This is an outstanding opportunity to join a business who continue to invest heavily in its people, facilities, technology and future growth, while offering the stability and culture of a market-leading organisation. Reporting to the Engineering Manager, you will lead the site's maintenance function, driving equipment reliability, engineering performance, compliance and continuous improvement across a modern, highly automated manufacturing facility. This is a visible leadership role with significant influence across operations, engineering and continuous improvement initiatives, offering genuine scope to shape maintenance strategy and develop a high-performing team. The Opportunity As Maintenance Lead, you will take ownership of planned and reactive maintenance activities, engineering resource planning, contractor management, stores control and maintenance systems. You will play a key role in improving plant reliability, reducing downtime and supporting a culture of operational excellence. Key responsibilities will include: Lead and develop the site's maintenance team Manage preventative maintenance program and CMMS Drive improvements in equipment reliability and asset performance Manage engineering contractors and external resources Support continuous improvement and RCA activities Maintain engineering compliance, safety standards and statutory inspections Collaborating closely with Production, Operations and Engineering stakeholders to support business objectives. About You We are looking for a proactive and engaging engineering leader who combines strong technical capability with excellent people management skills. Key skills & experience: Qualified Mechanical or Electrical Engineer Experience leading maintenance teams within a manufacturing, process or industrial environment; chemical, pharmaceutical, food & beverage, FMCG, process manufacturing or similarly regulated industries. Strong understanding of preventative maintenance, asset management and reliability principles Experience working with a CMMS A background in mechanical, electrical or chemical engineering Strong leadership skills along with the ability to coach, develop and motivate teams Strong communication and stakeholder management skills * Experience operating within highly regulated manufacturing environments. Why Join? The company offers: Competitive salary Annual discretionary bonus 25 days holiday plus the option to buy or sell additional days Private medical insurance Life assurance Health cash plan options Dental and travel insurance options Cycle to Work scheme Green car scheme and free EV charging Excellent pension contribution with 8% employer contribution Ongoing professional development and long-term career progression opportunities. Apply If you are a maintenance professional who enjoys leading teams, driving reliability improvements and delivering engineering excellence within a modern manufacturing environment, apply now

Site Construction Manager Liverpool Are you an experienced Site Construction Manager with a mechanical or civil engineering background? Do you enjoy leading complex projects in live, high-hazard environments? Are you looking for your next long-term contract outside IR35? What's in it for you? £50 to £55 per hour Outside IR35 contract 50 hours per week 69 month contract August start What will you be doing? Managing the day-to-day delivery of a fire suppression pipework and civil installation project, ensuring work is completed safely and to specification Leading multi-disciplinary site teams and subcontractors, coordinating trades to maintain programme and quality Ensuring compliance with site-specific procedures and high-hazard working requirements Taking responsibility for site health and safety, including toolbox talks, permit-to-work systems and enforcing safe working practices Liaising with the client's site operations team to coordinate access, permits and interfaces with live plant Monitoring programme progress, resolving site issues and escalating risks where required Managing quality inspections of pipework and civil installations against engineering specifications Coordinating deliveries, plant and materials on a busy operational site Producing site progress reports and attending client progress meetings Where you'll be doing it? You'll be joining a specialist engineering business delivering a major fire suppression installation on a live operational port facility in Liverpool. This technically challenging project involves working within a high-hazard environment, requiring strong site leadership, close coordination with operational teams and a relentless focus on safety, quality and programme delivery. What you'll need: Valid SMSTS qualification Mechanical or civil engineering background Proven experience managing multi-disciplinary teams in hazardous or high-hazard environments Experience working on ATEX sites is highly desirable Strong site leadership skills with experience running live operational sites Experience managing subcontractors and coordinating multiple trades on complex construction programmes We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Business Development Manager Temporary Power & Energy Solutions £50,000 – £60,000 + Car Allowance + Bonus North West – National Customer Coverage An exciting opportunity for an ambitious Business Development Manager to join a rapidly growing provider of temporary power, backup generation and engineered energy solutions. This is a commercially focused role offering the autonomy to develop new markets, secure major accounts and sell everything from straightforward hire requirements to complex, high-value infrastructure projects. About the Company Our client is an established and expanding technical services business delivering complete power solutions across the UK. Its capabilities include equipment hire and sales, generator service repair and hire as well as maintenance and permanent or temporary electrical installations. The company supports customers across construction, infrastructure, facilities management, utilities, healthcare, industrial, public-sector and critical-power environments. With continued investment in its people, engineering capability and operational infrastructure, the business offers a fast-paced, entrepreneurial environment where individuals can make a genuine commercial impact. The Role Reporting to the Chief Operating Officer, you will develop new business across the company’s full range of power and energy services. You will manage the complete sales process, building relationships with key decision-makers and working alongside engineering, operational and project teams to deliver commercially viable customer solutions. Key responsibilities include: Identify and secure new customers across target sectors. Build and manage a strong pipeline of qualified opportunities. Develop relationships with contractors, facilities management providers, utilities, industrial businesses and public-sector organisations. Sell generator hire, ancillary equipment and bespoke temporary-power packages. Develop opportunities across equipment sales, fuel management and maintenance contracts. Identify large-scale temporary and permanent electrical projects. Prepare quotations, proposals and tender submissions. Negotiate commercially sound agreements and protect target margins. Cross-sell services across existing and newly acquired accounts. Maintain accurate CRM records, forecasts and customer activity. Represent the business at customer meetings, exhibitions and industry events. Person Specification Essential: Proven success in business development and new customer acquisition. Strong commercial, negotiation and relationship-building skills. Experience managing a sales pipeline from initial prospecting through to close. Confident presenting technical or service-led solutions. Self-motivated, resilient and comfortable working autonomously. Strong organisation and CRM management skills. Full UK driving licence. Experience within generator hire, temporary power, plant or equipment hire, industrial services, fuel management, electrical infrastructure or engineered solutions would be highly desirable. Knowledge of public-sector frameworks, NEC or JCT contracts would also be advantageous. What’s on Offer £50,000–£60,000 basic salary. Bonus Car allowance. Mobile phone and laptop. 25 days’ holiday plus bank holidays. Company pension scheme. Employee assistance and wellbeing programme. Ongoing technical and professional development. Genuine progression within an ambitious, growing business. Broad solution portfolio with significant cross-selling potential. Autonomy to shape the company’s business development strategy. Next Steps If you have a background in technical business development and want to join a growing company where you can directly influence its future success, apply today with your CV

Manpower are currently seeking an interim Consumer Insights Sensory Specialist, to work with our global FMCG client Unilever, renowned for brands such as Dove, Sure, Persil, and Simple, and become an integral part of their fast-paced FMCG environment.The position is based at our client's scientific Research & Development facility in Port Sunlight Village, Wirral easily accessible by train and car. This is a full-time temporary role to run for 10 months, requiring 37.5 hours per week, Monday to Friday. Compensation for this role is competitive, paying up to £42,268 per annum, pro rata, depending upon experience.Role PurposeDesigning and delivering end?to?end sensory and consumer research to support Homecare product innovation and product superiority program. Partnering closely with CI and R&D teams to translating sensory data into actionable insights and building new sensory methods to meet evolving business needs.Key ResponsibilitiesDesign and deliver research studies aligned to project needs, working with internal and external partners to execute quantitative, qualitative, and sensory research.Collaborate closely with CI and R&D teams to understand project objectives and coordinate sensory and consumer testing plans.Manage Homecare sensory panel operations, including protocol development, panel training, and data quality assurance.Utilise sensory tools and software to ensure accurate data collection, and translate results into clear, actionable insights.Contribute to claims development and product storytelling, grounded in sensory and consumer understanding.Brief and manage external agencies, ensuring effective coordination from study design through to final reporting.Ensure all activities comply with ethics, hygiene, safety, and product handling standards.Drive continuous improvement of sensory capabilities, tools, and methodologies by identifying and integrating innovative approaches, including AI and new research technologies.Skills & Capabilities & ExperienceBachelor's or Master's degree in a relevant discipline (e.g. Sensory Science, Food Science, Psychology, Statistics)Strong knowledge of consumer research and sensory methodsProven ability to plan and manage own work within a technical area.Ability to manage and communicate with stakeholders, including those from non-technical backgroundsExperimental design, familiarity with statistical tools, statistical data analysis and interpretation of results.Ability to interpret data, from multiple sources in order to identify relevant insights.Ability to communicate consumer insights to a variety of audiences.Problem solving skills with practical creativity.Ability to work with in multi-functional teams.Excellent communication & interpersonal skills.Good organisation and time-management.Additional InformationPort Sunlight working environment:Free onsite parkingStaff shop discounted productsWorking in state-of-the-art laboratory and pilot plant facilitiesFree parking onsite5 mins walk to train station serving Liverpool & Chester20-minute drive from Liverpool city centre/30-minutes drive from ChesterDisabled parkingIn the heart of picturesque Port Sunlight villageThere are also several site clubs available to join covering a range of topics including Book Club, Running, Choir, Pool, Genealogy and much more.The sites have three catering outlets which provide a range of hot and cold food and drinks daily.In addition there are a range of vending machines and cold water dispensers around the site accessible throughout the day.If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.TPBN1_UKTJ

Are you looking for a business development role ? Have you got B2B experience? Do you want to earn uncapped commission? We are the UK’s largest end to end drainage solution provider with depots strategically located across the UK from Aberdeen to Plymouth, to ensure round the clock coverage for customers and clients alike. About the Role: An opportunity has arisen to recruit an experienced Sales Professional with drive and ambition to be appointed into the role of Area Development Manager for one of our well established UK Drainage Depots. This role is reporting to the Regional Sales manager to develop new business opportunities and maintain as well develop existing relationships. Location: Inverness Hours: Monday to Friday – 37.5 Hours per week. Salary : depending on previous experience + uncapped earning potential (OTE 75k) Responsibilities – but not limited to: • Targeting and sourcing new business across the region, • Working with National accounts to develop and grow business, • Attending site visits to evaluate work requested, • Quoting for works quickly in accordance with costings, • Proactively following up on quotations to secure business, • Upselling to existing clients, maintaining relationships and understand future needs to secure business, • Managing your own diary, administration, • Working closely with depot manager to achieve sales targets and forecasting, • Travelling to various locations and regional training events & meetings, • Attending sales events, networking events, • Proactively selling the services through advertising campaigns and linkedin etc Experience and qualifications required for the role: • Business to Business Sales experience essential, • Service industry sales experience - ideally with drainage/waste management or construction related industry or multi utility essential, • Excellent work ethic who can go above and beyond to ensure the best service is delivered, • Desire to succeed in a niche but highly rewarding market What we offer: • Full induction programme and ongoing training/development with promotion opportunity, • Talent Reviews, • 24 Days holiday plus Bank Holidays, pension and death in service, • Uncapped earning potential., • Hybrid Car - fuel card About the Lanes Group: The Lanes Group are the UK’s largest independent provider of water and wastewater solutions and services, we play a vital role in always maintaining the seamless operations of the nation’s water systems. Formed in 1992, our half a billion-pound turnover ensures continued expansion for market share. Our key differentiator is our 4000+ staff and our resource pool that includes the most innovative fleet, plant, and equipment the market has to offer. The Lanes Group plc comprises of a range of established service providers subsidiaries, which complement the specialist service of Lanes, by both work type and geography. Increasing our overall capability, assets and offering to our customers. We are an equal opportunities employer and welcome applications from under-represented members of the community. Strictly no agencies please LAN

Tradin Organic, the global front-runner in organic ingredients, started its journey 40 years ago with its HQ in Amsterdam. Today, we have grown to source, process, and supply over 150 delicious organic ingredients from 60+ origins worldwide, holding a diverse range of certifications. We offer a wide range of products from frozen fruit and vegetables, dried fruits, coffee, cocoa, cereals, rice, sugar, soya, pulses, seeds, nuts, oils, fats, fruit concentrates, dairy products, seasonings, sweeteners and more. Our full-service portfolio impacts and is built on an extraordinary supply chain of farmers, traceable sourcing projects, quality assurance, sustainability initiatives, and in-house processing facilities such as Crown of Holland and Suncomo. Tradin Organic has offices worldwide, fostering a vibrant and diverse environment. We are a part of Acomo N.V. with headquarters in Rotterdam. Acomo N.V. is an international group with as its principal business the sourcing, trading, treatment, processing, packaging, and distribution of conventional and organic plant-based food products and ingredients. Acomo N.V. is listed at the Amsterdam Stock Exchange. Together, we supply organic ingredients that taste good and do good. Join us in our mission to make organic everyone’s first choice. For our office in the center of Amsterdam, The Netherlands, we are looking for a: UK Sales Manager (Tradin Organic) Location: Remote (UK) with travel opportunities Type: Full-Time About the role: As the UK Sales Manager, you will play a pivotal role in shaping and growing Tradin Organic’s presence in the UK. This position offers a clear pathway for leadership development and long-term career growth. You will have the autonomy to build and expand a diverse portfolio of strategic accounts, while also identifying new opportunities to enhance our market share. Working closely with various business units, you will develop and execute a comprehensive UK market strategy that drives commercial success. This role offers the chance to progress into a more strategic position as you contribute to Tradin Organic’s growth in the UK market. Key Responsibilities Collaborative Strategy Building: Develop and execute a comprehensive UK market strategy, driving sales growth, profitability, and market expansion in close collaboration with Business units while ensuring alignment and collaboration across different functions. Collaborative Strategy Building: Develop and execute a comprehensive UK market strategy, driving sales growth, profitability, and market expansion in close collaboration with Business units while ensuring alignment and collaboration across different functions. Collaborative Strategy Building: Develop and execute a comprehensive UK market strategy, driving sales growth, profitability, and market expansion in close collaboration with Business units while ensuring alignment and collaboration across different functions. Build and Nurture Relationships: Develop and maintain strong, trusted partnerships with existing accounts, focusing on long-term growth and mutual success. Market Expansion: Identify and secure new business opportunities within the UK food market, leveraging innovative approaches to enhance market share. Negotiation Leadership: Lead negotiations with customers of all sizes, ensuring mutually beneficial agreements that drive profitability and growth. Represent & Advocate: Represent Tradin Organic at industry events and with key stakeholders to enhance visibility and credibility in the UK market. Strategic Awareness: Continuously monitor trends, customer needs, and competitor activity to refine our UK strategy. Drive Commercial Impact: Lead efforts to maximize revenue, profitability, and market share, with a focus on achieving tangible business results. Build and Nurture Relationships: Develop and maintain strong, trusted partnerships with existing accounts, focusing on long-term growth and mutual success. Build and Nurture Relationships: Develop and maintain strong, trusted partnerships with existing accounts, focusing on long-term growth and mutual success. Market Expansion: Identify and secure new business opportunities within the UK food market, leveraging innovative approaches to enhance market share. Market Expansion: Identify and secure new business opportunities within the UK food market, leveraging innovative approaches to enhance market share. Negotiation Leadership: Lead negotiations with customers of all sizes, ensuring mutually beneficial agreements that drive profitability and growth. Negotiation Leadership: Lead negotiations with customers of all sizes, ensuring mutually beneficial agreements that drive profitability and growth. Represent & Advocate: Represent Tradin Organic at industry events and with key stakeholders to enhance visibility and credibility in the UK market. Represent & Advocate: Represent Tradin Organic at industry events and with key stakeholders to enhance visibility and credibility in the UK market. Strategic Awareness: Continuously monitor trends, customer needs, and competitor activity to refine our UK strategy. Strategic Awareness: Continuously monitor trends, customer needs, and competitor activity to refine our UK strategy. Drive Commercial Impact: Lead efforts to maximize revenue, profitability, and market share, with a focus on achieving tangible business results. Drive Commercial Impact: Lead efforts to maximize revenue, profitability, and market share, with a focus on achieving tangible business results.

Channel Manager - Southern Europe Salary to attract the best plus package Nationwide Newman Stewart are currently working on behalf of a Yorkshire-based client to source an outstanding candidate to step into the role of Channel Manager covering Southern Europe. The company: With over 100 years of history in the market, this family owned and operated business produces a range of oils and lubricants for a wide variety of industries including food manufacturing and maritime. From their office and manufacturing plant in Leeds, they serve a global market and are committed to their strong company values and core behaviours. Renowned for developing people, the vast majority of employees stay within the business once they have joined. The role: The Channel Manager for Southern Europe will be tasked with increasing market share across the the region. This will be achieved through managing multiple sales channels, end users, agents and distributors to increase sales volume and profit according to an agreed sales strategy. This will include: • Understanding current route to market and building relationship with existing partners, • Building and maintaining a pipeline of new business to track and develop opportunities, • Working with internal stakeholders including marketing and technical teams to promote new products and services, • Negotiating the best achievable commercial agreements for product sales to achieve maximum profitability Your profile: • Experience of working nationally and an understanding of the complexities of business development in new regions, • Strategic innovator, highly commercial and analytical drive, • Highly developed business networking and development skills with evidence in support, • Proven track record of new business development, • Knowledge of European languages would be an advantage In return: • A competitive salary and benefits package, • The ability to identify your own priorities and agree a sales strategy, • Generous holiday allowance, • A 'family feel' office atmosphere, • Free meals whilst on site, • Challenge, autonomy and growth To Apply This is an excellent opportunity in a challenging, fast paced and dynamic business. Interested parties should apply accordingly or contact John Pease in the first instance for a confidential conversation. Contact details can be found via the Newman Stewart website. About Us Newman Stewart is a boutique executive search firm, delivering high-performing candidates to high-profile and mission-critical assignments. With a proven track record of success globally, we are the recruitment partner of choice to many blue chip, medium and small organisations, providing Executive Search, Management Selection and Psychometric Assessment Services to its clients.

JOB TITLE: Horticultural Field Sales Executive to Propagators and Plant Growers The COMPANY Established for a century our client are the acknowledged market leaders in horticulturist sales providing seeds and young plants to growers. They have forged a deserved reputation for the quality of their plants, service and importantly their staff. The ROLE An opportunity has arisen for an Area Sales Manager with experience in horticultural sales to plant producers and plant breeders in the North West and Midlands. Managing over a 100 existing accounts (propagators, plant breeders, plant producers) in the area you will be tasked with maintaining and growing existing business plus, when the opportunity arises, winning new accounts. This is very much a field based position, it is envisaged that you will spend an average of three days a week in front of c.5 customers a day. The CANDIDATE Our client is looking for an enthusiastic an experienced horticultural Field Sales person possessing the ambition to make a significant contribution to maintaining my Client's market share. You will possess the following skills; • Experience of field sales *Knowledge of the plant industry • Logical and organised approach to sales *Take pride in doing a job well Above all you will have the drive and enthusiasm to make a difference. SALARY: £35-40K Basic Depending on Experience + £8K annual bonus + Car LOCATION: North West & Midlands This role is commutable from: Nottingham Derby Birmingham Leicester Wolverhampton Stoke-on-Trent Manchester Liverpool ALTERNATIVE JOB TITLES: Field Sales - Young Plants, External Sales - Propagators, BDM - Plant Seeds, Horticultural Business Development Manager Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike. INAND1

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Ready to lead a multidisciplinary design team and shape the future of water infrastructure? Join our dynamic Water Solutions team as a Design Manager, based in our rapidly growing England & Wales offices with the benefit of our flexible hybrid working model. At AECOM, we’re at the forefront of delivering exceptional water programmes and projects through long-term partnerships with leading clients, including Wessex Water, Thames Water, Welsh Water, Southern Water, Severn Trent Water South West Water, and international contractors. In this role, you’ll work on high-impact projects ranging from potable water and sewage networks to treatment works of all scales, covering all stages of design and delivery, from feasibility to construction, operation, maintenance, and asset management. Examples of our major on-going projects include working with our partners to deliver design elements of Alderney and Knapp Mill water treatment plants for South West Water, Avonmouth water recycling centre for Wessex Water, the Wanlip sewage treatment plant for Severn Trent Water, and a large programme of AMP8 treatment works upgrades for Southern Water, and other water companies. This is a fantastic opportunity to take the next step in your career in technical project leadership, helping to deliver creative, sustainable solutions that address today’s challenges and anticipate tomorrow’s needs. Here’s what you’ll do: • Lead: Drive technical delivery of water and wastewater infrastructure / treatment projects, managing multi-disciplinary technical teams to deliver value added solutions to client challenges throughout the design lifecycle., • Manage: Oversee key packages of work from conception to handover, interfacing with AECOM teams, clients and suppliers to create a seamless technical solution., • Collaborate: Work closely with clients and AECOM partners to ensure stakeholder buy in to solutions, also contributing to AECOM’s wider technical capability and innovative approach., • Develop: Perform line manager duties and support the development of junior team members, managing their input to projects and mentoring them. If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just deliver infrastructure solutions, but also safeguard human health and the environment. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come & Grow with Us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. At AECOM, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Experience in managing the technical delivery of water and wastewater engineering projects with multi-disciplinary knowledge, ideally including treatment schemes and/or pipeline design. You will also have experience leading multi-disciplinary design teams., • Relevant experience in a similar role for a water company, consultancy or contractor., • Hands on experience, designing complex wastewater treatment solutions., • A degree or equivalent in a related engineering subject (e.g. civil, electrical, mechanical) and/or equivalent experience., • Chartered or Incorporated with a relevant institution e.g. ICE, CIWEM or working towards it., • Experience of undertaking feasibility studies, options appraisal and concept design, and/or outline and detailed design for water company clients and design and build contractors. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of energy infrastructure? We are seeking a highly skilled Senior CAD Engineer to join our growing team within our Transmission and Distribution division. The successful candidate will play a critical role in the delivery of high-quality substation drawing design packages across multiple client frameworks, including SSEN, SPEN, UKPN, NGED, NGET, defence, and other private developers. You will be responsible for ensuring CAD output quality and consistency, managing drawing standards compliance, and applying your understanding of substation plant layout operational, maintenance and clearance requirements in line with BS and IEC standards. You will be a key interface with our enterprise capability teams in terms of CAD quality and standards, to ensure AECOMs high quality standards are met. Here’s what you’ll do: • Develop and produce substation layout drawings and 3D models in accordance with client specifications and industry standards (BS, IEC), • Manage and enforce CAD quality standards aligned with enterprise capability and consultancy-wide best practices., • Ensure spatial planning complies with clearance regulations and substation maintenance and operational safety constraints., • Collaborate closely with electrical engineers, civil and structural designers, and project managers to ensure fully coordinated multi-disciplinary deliverables., • Interpret and implement client-specific standards including but not limited to: NGED, NGET, SSEN, SSET, SPEN and UKPN., • Conduct CAD audits, reviews, and quality assurance checks., • Support the development and maintenance of CAD libraries, drawing templates, and workflows to drive consistency and efficiency., • Mentor and provide technical guidance to junior CAD technicians., • Participate in design reviews, HAZID/HAZOP, and constructability assessments when required. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • HNC/HND or equivalent in Electrical Engineering, Design Engineering, or a related field., • Proven experience in a CAD plant engineering role within a utility environment., • Strong working knowledge of of primary plant general arrangement layout , electrical schematic and secondary cabling and wiring drawing interface designs, • Proficient in AutoCAD and at least one 3D CAD package (e.g., AutoCAD Plant 3D, Bentley Substation, Revit, or similar)., • Familiarity with BS and IEC standards for electrical installations., • Practical experience working to client standards including NGED, NGET, SSEN, SSET, SPEN, UKPN or other UK DNO/TO specifications., • Understanding of CAD layer management, drawing numbering systems, and drawing control processes. Desirable Skills: • Experience with BIM Level 2 workflows and Common Data Environments (CDE)., • Familiarity with GIS and asset data integration into CAD platforms., • Ability to script or automate CAD workflows using LISP, VBA, or similar. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of Energy infrastructure? AECOM is recruiting for an battery energy storage systems (BESS) focused Senior/Principal Electrical Engineer to join our UK Transmission and Distribution (T&D) department. Our T&D team delivers HV design for electrical power projects at transmission and distribution voltage levels. The focus of this role is renewables and energy storage, grid connections, and private networks at voltage levels normally between 11kV to 400kV. Typical projects include feasibility, optioneering, FEED, detailed design and design assurance on existing or new build renewable generation, including pumped storage hydro, PV and wind – typically with collocated Battery Energy Storage Systems (BESS). Ready to push the limits of what’s possible? Here’s what you'll be working on: • Large projects and frameworks with renewable energy generation developers, mostly in UK and Ireland but also with some global projects., • Front End Engineering Design (FEED), design for planning, feasibility studies, detailed design etc. of energy storage systems including associated grid connections, control and metering., • Working with internal AECOM clients delivering large renewable generation or private wire projects, • In addition to the engineering responsibilities, this role includes some support to bidding, project and quality management. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Here’s what we’re looking for: • Previous experience with consultancy, contractor, equipment manufacturer or electrical utility in the energy sector. Suitable experience as FEED designer, detailed design or owner’s engineer role., • A good understanding of both renewable generation and energy storage technology in general and, in particular, battery storage technology of all types and chemistries., • Experience designing the HV grid connection, metering, control requirements etc. associated with battery storage installations, including BESS collocated with renewable energy generation., • Knowledge of grid connection requirements for renewable generation and energy storage, including G99 etc., • Good understanding of electrical plant items and control systems such as transformers, cables, circuit breakers, HV Protection & Control., • Good team player with a client-focused mindset and customer facing skills., • Ability to work flexibly across multiple projects., • Ideally have a Degree in Electrical Engineering, • Ideally have Project management experience (incl. budget, time and quality)., • Ideally have experience of multi-discipline engineering projects, • Ideally have experience of design & site construction review., • The role is focused on energy storage, but knowledge of grid connection considerations will be advantageous. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of energy infrastructure? We are seeking a highly skilled CAD Plant Engineer to join our growing team within our Transmission and Distribution division. The successful candidate will play a critical role in the delivery of high-quality substation drawing design packages across multiple client frameworks, including SSEN, SPEN, UKPN, NGED, NGET, defence, and other private developers. You will be responsible for ensuring CAD output quality and consistency, managing drawing standards compliance, and applying your understanding of substation plant layout operational, maintenance and clearance requirements in line with BS and IEC standards. You will be a key interface with our enterprise capability teams in terms of CAD quality and standards, to ensure AECOMs high quality standards are met. Here’s what you’ll do: • Develop and produce substation layout drawings and 3D models in accordance with client specifications and industry standards (BS, IEC), • Manage and enforce CAD quality standards aligned with enterprise capability and consultancy-wide best practices., • Ensure spatial planning complies with clearance regulations and substation maintenance and operational safety constraints., • Collaborate closely with electrical engineers, civil and structural designers, and project managers to ensure fully coordinated multi-disciplinary deliverables., • Interpret and implement client-specific standards including but not limited to: NGED, NGET, SSEN, SSET, SPEN and UKPN., • Conduct CAD audits, reviews, and quality assurance checks., • Support the development and maintenance of CAD libraries, drawing templates, and workflows to drive consistency and efficiency., • Mentor and provide technical guidance to junior CAD technicians., • Participate in design reviews, HAZID/HAZOP, and constructability assessments when required. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • HNC/HND or equivalent in Electrical Engineering, Design Engineering, or a related field., • Proven experience in a CAD plant engineering role within a utility environment., • Strong working knowledge of of primary plant general arrangement layout , electrical schematic and secondary cabling and wiring drawing interface designs, • Proficient in AutoCAD and at least one 3D CAD package (e.g., AutoCAD Plant 3D, Bentley Substation, Revit, or similar)., • Familiarity with BS and IEC standards for electrical installations., • Practical experience working to client standards including NGED, NGET, SSEN, SSET, SPEN, UKPN or other UK DNO/TO specifications., • Understanding of CAD layer management, drawing numbering systems, and drawing control processes. Desirable Skills: • Experience with BIM Level 2 workflows and Common Data Environments (CDE)., • Familiarity with GIS and asset data integration into CAD platforms., • Ability to script or automate CAD workflows using LISP, VBA, or similar. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. At Aecom we are currently recruiting for Senior Project Controls consultants to join us at either our Birmingham, Manchester or London offices. The role will be part of the AECOM Integrated Programme Controls team and demonstrable experience in the delivery of PMO best practice in a consulting environment on infrastructure projects and programmes will be a key requirement. The primary function of this role will be the management and delivery of Project and programme controls for clients, addressing actual budget and forecast costs in order to effectively capture the business and Project status. Here’s what you’ll do: Your day to day will include but not be limited to the following tasks and responsibilities; • Establishing / building on existing AECOM cost control and management systems, • Accountable (Initially) for day-to-day collection of all cost information, • Responsible for the establishment and operation of cost management process, • A key participant in establishing and monitoring Management budgets, • Manage Project budgets - non-manual and manual people job hour and cost control, • Manage Project budgets – equipment, plant, material and subcontract cost control, • Responsible for the reporting of costs against activities and to provide metrics and comparisons between actual cost of works performed and budgeted cost of works performed, • In liaison with all parties – To be responsible for collation and the management of quantity tracking/ variances, • Prepare / collate inputs into the weekly and monthly reporting on cost flow forecast, cash flow forecast and cost value reporting, • Management of Project defined cost forecasts and all associated reporting, cost capture and allocations, • Delivery of data analysis to support project decisions and delivery of appropriate reporting dashboards and management information using the latest best practice digital tools If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Buildings + Places page on _ a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Experience in designing and managing the technical delivery of water and wastewater networks and treatment projects from feasibility and outline design to detailed design and construction support., • Strong collaboration and coordination skills between teams, clients and stakeholders., • Commercial awareness with experience in monitoring and control of engineering budgets., • A degree or equivalent in a related engineering subject., • Chartered Engineer Status (or approaching chartered status). If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on _. #LI-BG1 About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

SaaS Account Manager with a proven track record of account management within the public sector SaaS software space (ideally within the transport, logistics, plant management or national infrastructure sector) is sought on a remote basis by a SaaS scale up with a hub based near Birmingham. With a market leading cloud native solution that has attracted new private equity investment this SaaS Account Manager will play a lead role in shaping and delivering a customer account management strategy spanning customer onboarding through to new product promotion within key accounts. Due to the growth trajectory this Account Manager can expect a clear progression path within this highly flexible, forward thinking business. This SaaS Account Manager should have most of the following key skills: • At least 3 years SaaS account management experience, • Proven experience managing public sector accounts (ideally within national infrastructure, fleet, plant, transport or logistics sector), • A consultative, engaging sales/ client engagement approach, • Excellent stakeholder management & presentation skills, • A personal drive to succeed independently through hands on delivery This SaaS Account Manager will receive the following benefits • base salary of up £55,000 with realistic 80k OTE year one, • Long term remote working with flexible working hours (once a month in office), • Excellent progression opportunities, • 25 days holiday, • Pension scheme, • Regular salary and progression reviews, • A high performance, autonomous working environment So if you are a talented account manager who likes the sound of working in a PE backed,high growth, dynamic company with unparalleled earning potential and progression opportunities then please apply now to be considered. Birmingham (remote) SaaS, public sector, plant, fleet, logistics, transport, account management

Lanes Group are the UK’s largest independent provider of water and wastewater solutions and services, we play a vital role in always maintaining the seamless operations of the nation’s water systems. Formed in 1992, our half a billion-pound turnover ensures continued expansion for market share. Our key differentiator is our 4000+ staff and our resource pool that includes the most innovative fleet, plant, and equipment the market has to offer. We are the UK’s largest end to end drainage solution provider with depots strategically located across the UK from Aberdeen to Plymouth. As such we are committed to ensuring the health, safety, and wellbeing of our colleagues and customers. We are therefore looking to add a dynamic, enthusiastic, and talented individual to our team to help us achieve best practice in compliance and risk management. About the role: Lanes Group are looking to appoint a National Account Manager, based within London. The successful applicant will be responsible for managing and growing relationships with key clients, overseeing the sales activities for Lanes Groups key national customers across the UK. This role involves strategic planning, driving business growth, and ensuring client satisfaction while meeting or exceeding sales targets. What we offer: • Competitive Salary, • 24 Days holiday plus Bank Holidays, • Uncapped earning potential, • Pension, • Death in service, • Training and progression opportunities Responsibilities – but not limited to: • Build and maintain long-term relationships with national accounts, ensuring client retention and satisfaction., • Serve as the primary point of contact for key clients, addressing any concerns or needs., • Regularly meet with clients to review performance, identify opportunities, and discuss future business., • Develop and implement sales strategies for national accounts to meet or exceed revenue targets., • Collaborate with the sales team to identify and target new business opportunities., • Negotiate contracts, pricing, and terms with clients to maximize profitability., • Work with marketing and product teams to tailor solutions for clients., • Provide regular reports on sales performance, account activity, and forecast future business growth., • Analyse sales trends and market conditions to adjust strategies and improve sales results., • Work closely with internal teams, such as operations, finance, marketing and customer service, to ensure the smooth delivery of products/services to clients., • Stay informed about industry trends, competitor activities, and market dynamics to adjust sales strategies accordingly., • Identify key opportunities to upsell and cross-sell within existing national accounts. Experience and qualifications required for the role: • Past experience in sales and national account management, • Proven track record of success in sales, strategic account management, and driving revenue growth., • Experience negotiating large-scale contracts and working with major national retailers or clients Skills and behaviours: • Strong leadership and team management skills., • Excellent communication, negotiation, and presentation skills., • Ability to analyse data and develop actionable insights for sales and account strategies., • Knowledge of industry trends and the competitive landscape., • Strong problem-solving abilities and a results-oriented mindset., • Flexibility to travel to various client and company sites as per business needs., • Full UK Driving licence (No more than 6 penalty points) This position is open to Internal and External candidates. Any internal candidates currently employed within a division of Lanes Group must complete an Internal Application form and submit to recruitment. Lanes Group plc comprises of a range of established service providers subsidiaries, which complement the specialist service of Lanes, by both work type and geography. Increasing our overall capability, assets and offering to our customers. We are an equal opportunities employer and welcome applications from under-represented members of the community. Strictly no agencies please

Are you passionate about engineering? Do you want to make a difference? You could be one of our 54k+ colleagues in over 30 countries working on inspiring projects in the most innovative companies. Join us and start building tomorrow’s world today! Job Title: Model Based Systems Engineer Location: Manchester (Hybrid – 1 day/month on-site) Employment: Full-Time, Permanent Sectors: Aerospace / Defence ALTEN UK is seeking a Model Based Systems Engineer to support high-profile aerospace programmes within the combat air domain. This is an exciting opportunity to work at the forefront of next-generation air platform development, where your models will contribute directly to complex system design, performance optimisation and full digital twin representations. You’ll collaborate with experienced engineers across multiple disciplines and play a key role in shaping system behaviour at a platform level. Responsibilities: • Develop and manage functional, plant, control and requirement models to represent platform systems in a model-based systems engineering (MBSE) environment., • Contribute to the creation and evolution of a digital twin of the air platform, supporting validation, verification and system optimisation activities., • Analyse system-level and aircraft performance metrics using modelling tools and real-world data., • Collaborate with engineering teams to define interfaces between systems, ensuring effective integration across platform and sub-system levels., • Support strategic modelling efforts aimed at reducing test burden and enhancing simulation and trial planning. Essential Skills & Experience • Bachelor’s degree (or higher) in a relevant engineering discipline (e.g. Aerospace, Mechanical, Systems, Electrical)., • Minimum of 2 years' experience within systems engineering, ideally within aerospace or defence., • Working knowledge of SysML, Matlab/Simulink, or Cameo Systems Modeller., • Understanding of aircraft systems and their key performance characteristics., • Familiarity with MBSE principles, tools and practices., • Must be Security Clearable (UK national), with UKEO clearance preferred. Why join us? We foster a community of dually talented individuals who are both entrepreneurs and technology specialists. Our teams embody the spirit of innovation and entrepreneurship, enabling us to develop solutions most efficiently. Our commitment to sustainable growth is unwavering, and we continuously strive for accelerated transformation and continuous improvement. Through ALTEN labs, mentoring programs, internal universities, and more, we are always pushing boundaries and embracing new possibilities. We offer incredible opportunities to join inspiring projects in the most innovative companies. We prioritise your career development with personalised support plans tailored to your own aspirations. We're here to empower you and help you reach your full potential. Join our passionate team and start building tomorrow, today! In short you get: • A personalised career path and a rewarding management style, • A chance to work on the most exciting engineering projects and technologies along with Premium Customers, • A huge diversity of engineering projects and industries, • A competitive salary, • Private Medical Insurance, • Pension Scheme, • Cycle-to-work Scheme among many additional benefits, • Social atmosphere, regular gatherings, and team buildings, • Flexible way of working (role dependent)

The Lanes Group are the UK’s largest independent provider of water and wastewater solutions and services, we play a vital role in always maintaining the seamless operations of the nation’s water systems. Formed in 1992, our half a billion-pound turnover ensures continued expansion for market share. Our key differentiator is our 4000+ staff and our resource pool that includes the most innovative fleet, plant, and equipment the market has to offer. We are the UK’s largest end to end drainage solution provider with depots strategically located across the UK from Aberdeen to Plymouth, to ensure round the clock coverage for customers and clients alike. About the Role: We are a rapidly expanding team within an IT department that supports over 4,000 staff. As we continue to grow, we are looking for a skilled Microsoft 365 Developer to join us as a senior team member. Hours: Monday to Friday – 37.5 Hours per week Employment Type: Permanent Salary: £35,000 - £45,000 Location: Remote (A full UK Driving Licence is essential, as some travel will be required) Responsibilities – but not limited to: • Develop, configure, and deploy custom solutions within Microsoft 365, including SharePoint, Teams, Power Apps, Power Automate, and related applications., • Design and manage integrations between Microsoft 365 applications and third party systems using REST APIs, Microsoft Graph API, and custom connectors., • Create and manage custom connectors within Power Automate and Power Apps to facilitate efficient data flow across multiple platforms., • Collaborate with stakeholders and the Business Excellence Team to understand business requirements, translating them into technical specifications and scalable solutions., • Maintain, troubleshoot, and optimize existing integrations to ensure security, reliability, and performance., • Build automated workflows and solutions that enhance productivity and streamline business operations., • Document all integration processes, customizations, and best practices for reference and training. Experience and qualifications required for the role: • Degree in Computer Science, Information Technology, or a related field (or equivalent experience)., • Proven experience (2+ years) as a Microsoft 365 Developer or a similar role focused on integrations., • In depth knowledge of Microsoft 365 applications (SharePoint, Teams, Power Apps, Power Automate) and services., • Extensive experience with API integrations, particularly Microsoft Graph API, REST APIs, and third party APIs., • Strong proficiency in Power Platform development, including Power Apps and Power Automate custom solutions., • Knowledge of Azure services (Logic Apps, Functions, and API Management) for advanced integration capabilities. Familiarity with JSON, XML, OAuth, and other web technologies relevant to API development., • Strong problem solving skills and a proactive approach to troubleshooting integration issues., • Excellent communication skills for collaborating with cross functional teams and stakeholders., • Strong documentation skills and attention to detail., • Full UK Driving Licence with own transport. Desirable • Mulesoft exposure or equivalent, • Dynamics 365 experience, • Powershell/Python scripting What you will get in return: In joining the Lanes Group, the UK’s largest independent provider we are committed to fostering a workplace culture that prioritises the well-being, growth, and safety of our employees. Through continuous training, professional development opportunities, and a supportive environment that values every individual's unique contribution, we empower our team to uphold the highest standards of integrity, collaboration, and inclusivity. What we offer: • 24 Days holiday plus Bank Holidays, • Pension, • Death in service

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Senior Mechanical Engineer to join our growing Water Solutions team, with flexibility to be based in St Albans, Croydon, Basingstoke, London, Bristol, Cardiff, Exeter, or Plymouth. In this role, you’ll play a key part in delivering multi-billion-pound capital programmes across the UK water sector, contributing to projects ranging from small rural sites to complex, multi-million-pound infrastructure and non-infrastructure schemes in both water and wastewater. These long-term frameworks extend through AMP8 and AMP9, offering security, variety, and the opportunity to make a real impact in shaping sustainable water solutions. You will contribute to several major frameworks, including: Key Programmes You’ll Support: • Southern Water – £3.7 billion Capital Delivery Programme:, • Strategic Delivery Partner (SDP) Frameworks: Supporting Tier 1 Contractors on: • Lot 1: Non-infrastructure water projects, • Lot 2: Non-infrastructure wastewater projects, • Low Complexity Delivery Route & SDP Lot 3 Infrastructure Frameworks: Partnering exclusively with Tier 1 Contractors to deliver high-quality wastewater infrastructure projects. • South West Water – Engineering Consultancy Services Framework:, • Lot 3 – Multi-Discipline Engineering Design, • Wessex Water – Capital Delivery Partner Framework:, • Lot 2 – Design Consultants As part of a growing multi-disciplinary team with a long-standing presence in the region, you’ll be joining a group recognised for excellence, having won the IChemE Global Water Award 2023. You’ll have opportunities to develop your technical career not only through involvement in local projects but also by contributing to flagship initiatives across the UK&I and globally. With flexible working from our locations, you’ll collaborate across multi-disciplinary teams to deliver innovative and sustainable solutions. As part of AECOM, you’ll engage in impactful projects from inception through to delivery, enhancing the environment and supporting communities. Here's what you'll do: • Producing feasibility studies, outline design, detailed design and construction support., • Producing design drawings, mechanical plant selection and specification., • Liaising and collaborating with our water and other discipline teams including civil, electrical, process and mechanical engineers nationwide., • Deliver a high calibre of technical quality, contribute to bids, interface with clients and collaborators in design and planning., • Deliver to agreed budget, programme and quality along with supporting the preparation of project budget & programme., • Responsible for the design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc., • Site visits to carry out site surveys and the support of liaisons with clients, contractors & suppliers., • Producing plant layouts, technical specifications, Wimes datasheets, valve schedules, equipment schedules, lifting strategies and P&IDs, • Producing pumping stations designs, headloss calculations and pumping system analysis / pump selection If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • A degree (or equivalent) in Mechanical Engineering., • Progress towards Chartered Engineer status with a relevant institution, such as IMechE., • A proven ability to deliver engineering designs, reports, drawings, technical specifications, and calculations with confidence and precision., • Hands-on experience in delivering innovative solutions for water and wastewater engineering projects. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

  About CAI  CAI Software builds digital work execution platforms and software solutions that help manufacturing businesses operate with greater clarity and control. Our people bring structure to complexity by replacing fragmented, paper-based processes with connected digital workflows that improve visibility, compliance, and decision-making in real industrial environments. With 45+ years of experience and a presence across 10+ countries, CAI combines deep industry understanding with practical technology. Our team consists of ~800 employees worldwide who work across 15 core industries and support 5,000+ customers, guided by sound judgment, long-term thinking, and outcomes that endure.     CAI Business Units and the Markets We Serve  CAI Software is organized into three business units - Graphic Communications, Process Manufacturing, and Discrete Manufacturing – aligned to the markets we serve. This structure allows our teams to stay close to customer needs while operating with the scale and support of a global software company.       This role is part of our Graphic Communications business unit, which serves the global print and Graphic Communications industry with ERP and production software designed for commercial printers, Graphic Communications manufacturers, promotional and transactional print providers, sign and display manufacturers, and in-plant print operations. Our solutions help customers manage complex production environments, improve operational visibility, and deliver high-quality products efficiently and profitably.      CAI is looking for a Project Manager to join our Graphic Communications Segment operations team.  This role is a remote role located in the UK but it would be highly desirable for the applicant to have French language skills. We are looking for someone who has experience in large-scale software implementations, has good project management experience and knows how to develop and organize a project plan from discovery to go-live.  Job Description: In this role, you will be responsible for managing the implementation of Graphic Communications ERP solutions enabling our customers to achieve their business objectives and operational results.  This will include but not be limited to project management and delivery, stakeholder and customer relationship management, aligning with customer strategy, policy and procedures, product customizations and scope management, team leadership, financial management, partnering with the customer to advise and guide on change management issues and identifying Graphic Communications PMO process improvements. Main duties and Responsibilities: Project Management and Delivery • Development of project plans – including estimation of resource requirements (skills, software, hardware etc) and timeframes, scheduling, budgeting, dependency identification and management, and change management planning, • Management of project delivery according to approved project plans, objectives, budgets and document progress, • Stakeholder management – through active involvement and regular communication with key stakeholders, • Project status reporting to key stakeholders including progress against milestones, issue and risk management details and budget versus actual costs, • Management of project issues and risks – including: issue and risk identification, logging, assessment and treatment strategies, • Management of project scope change through defined project change management processes, • Alignment of projects to strategic and operational plans of the Customer, • Conduct of Post Implementation Reviews to identify and implement process improvement for future projects, • Completion and filing of project documentation Consultative Relationship Building • Active promotion and realization of the benefits and value associated with project delivery and professional service delivery in particular., • Earn the trust of key client executives and personnel through demonstrated expertise, high quality delivery, and candid insight, • Actively seek opportunities to expand value to the client within current scope and through proposal of project extensions and additional projects Profitability Management • Managing chargeability of Graphic Communications services resources, • Managing personal chargeability, • Management of stakeholder expectations in line with delivery capability and priorities, • Alignment of deliverables and business needs and requirements. Customer awareness of an agreement with scope and contract terms.  Obtaining signoff on completion of deliverables., • Managing invoicing process including proactively building client understanding of invoiced charges. Job Requirements: • Bachelor’s degree or equivalent experience, • Fluent in English and French. A good level of competence in any other European languages would be a plus, • 8+ years including a combination of relevant industry experience and project management experience, • Ability to manage customer expectations in accordance with work priorities, • Strong inter-personal and relationship management skills, • Effective verbal and written communication skills, • High level of presentation/persuasive communication skills, • Knowledge of Print industry would be a bonus

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of energy infrastructure? Join our Transmission & Distribution team and work on engineering and construction projects in private, industrial, transmission/distribution, and renewables sectors. This role will give you the opportunity to become part be part of an innovative design team, responsible for delivering practical electrical design solutions throughout the project lifecycle. You will also get to work under the guidance of the project technical lead, as well as provide guidance to junior staff such as graduates and apprentices. Here’s what you’ll do: • Carry out Medium Voltage and Low Voltage network design work to DNO Standards, • Provide distribution Open and Closed Ring and Radial feeder supply network solutions, • Carry out Medium Voltage and Low Voltage Intake and Distribution Substation Layout design, as well as main primary plant and equipment design, • Provide secondary protection and control solutions, digesting equipment scheme circuit and wiring diagrams, • Provide Medium Voltage and Low Voltage cable sizing calculations, routing, section, and termination drawings, • Produce electrical system, earthing grid design and modelling, and calculations for touch, step and transfer potential, • Undertake SCADA System, Auxiliary supply and COP metering interface designs, • Provide Medium Voltage and Low Voltage Local Standby and Back-up power supply (automatic and manual changeover solutions), • Write technical specifications and support with the down selection and placing of equipment orders/Procurement, • Liaise and collaborate with external suppliers and customers, • Provide input into electrical system studies for Low voltage and Medium voltage network modelling and verification, • Provide Arc-flash / Blast requirements and mitigation solutions, • Review design submissions within the team against client scope, • Be part of a design review process with Team Lead Verifier Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Degree or relevant qualification in Electrical Engineering, • Knowledge of British, European and DNO specific design standards, • Knowledge and Understanding of Protection Setting co-ordination and grading, • A proven track record as a Trainee or Assistant Electrical Engineer, or completion of a Graduate Training programme post degree in both a design office and/or a construction environment within the Energy /Power Sector, • Understanding of functional characteristics of Power Systems, • Ability of working with internal and external parties and working within a strong team-working culture, • Experience in writing clear and concise documentation Desirable experience: • Experience of working under engineering design governance structure, • Experience of preparing pre-construction information, carrying out design risk assessments, design risk review and knowledge of CDM regulations, • Experience in MV & HV cable design, • Experience in Protection & Control We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.