Trabajos overtime en PeterboroughCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Stevenage cluster, covering areas like Stevenage, Hitchin, Letchworth Garden City, Welwyn Garden City, Hertford. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Stevenage cluster, covering areas like Stevenage, Hitchin, Letchworth Garden City, Welwyn Garden City, Hertford. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Stevenage cluster, covering areas like Stevenage, Hitchin, Letchworth Garden City, Welwyn Garden City, Hertford. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Commercial Gas Engineer Mobile Location: Peterborough (Mobile Role)Salary: Competitive + Overtime + Excellent BenefitsWe're recruiting for an experienced Commercial Gas Engineer to join a well-established facilities management company, working on a commercial supermarket contract across Peterborough and the surrounding areas.This is a fantastic opportunity to join a stable and growing business that values its engineers, offers genuine career progression, and provides an excellent benefits package.The Role As a Mobile Commercial Gas Engineer, you'll be responsible for the planned and reactive maintenance, servicing, and repair of commercial gas systems across a portfolio of supermarket sites. You'll ensure all work is completed safely, efficiently, and in line with current regulations while delivering excellent service to the client.What's on Offer Competitive salaryPaid overtime availableCompany van (personal use available)Fuel card25 days annual leave + bank holidaysCompany pension schemeLife assurancePrivate healthcareOngoing training and funded qualificationsCareer progression opportunitiesTools, uniform, and PDA providedKey Responsibilities Planned preventative maintenance (PPM)Reactive maintenance and fault findingServicing and repairing commercial gas appliances and plantCompleting compliance paperwork and reportsEnsuring high standards of health and safetyBuilding strong relationships with the clientRequirements Commercial Gas qualifications (COCN1 or CODNCO1 and relevant commercial gas modules)Experience working within commercial buildings or retail environmentsFull UK driving licenceStrong fault-finding and diagnostic skillsExcellent communication and customer service skillsIf you're a Commercial Gas Engineer looking for a secure, long-term role with an excellent employer and a great package, we'd love to hear from you.Apply today or get in touch for a confidential discussion about the opportunity.TPBN1_UKTJ

Field Service Engineer - Compressed Air Systems - UK Wide - Based Commutable To Newark\n We are recruiting on behalf of our client for a Multi-Skilled Field Service Engineer to support customers across the UK. This is an excellent opportunity for a skilled engineer with a strong electrical and mechanical background looking for a varied field-based role with excellent earning potential and ongoing training. The Role\n The successful candidate will carry out planned preventative maintenance, fault finding, servicing, and repair work on specialist compressed air equipment at customer sites nationwide. \n This is a field-based role involving travel across the UK, with occasional overnight stays required but you must be commutable to Newark. Key Responsibilities\n\n • Diagnose faults and carry out repairs on rail depot and compressed air equipment\n, • Complete planned preventative maintenance (PPM) in line with OEM and company standards\n, • Service and maintain electrical and mechanical systems including:\n \n, • Pumps\n, • Compressors\n, • Vacuum systems\n, • Hydraulic equipment\n, • Pneumatic systems\n \n, • Ensure all work is completed in accordance with health, safety, quality, and environmental procedures\n, • Complete service documentation, reports, and risk assessments accurately\n, • Liaise professionally with customers on-site to minimise disruption and maintain high service standards\n, • Participate in an on-call rota with additional standby and call-out payments\n, • Attend manufacturer and internal training to maintain technical competency\nRequirements\n\n, • Time-served or apprentice-trained engineer\n, • Engineering qualification essential (Electrical and/or Mechanical Engineering)\n, • Previous field service engineering experience preferred\n, • Strong electrical and mechanical fault-finding skills\n, • Experience working on industrial equipment, compressed air systems or heavy plant machinery would be advantageous\n, • Good understanding of health & safety procedures within engineering environments\n, • Full UK driving licence essential\n, • Strong communication and problem-solving skills\nWhat's on Offer\n\n, • Competitive salary with paid overtime (£34K-£39K basic salary with good overtime rates, £45K-£50K OTE)\n, • On-call allowance and additional call-out payments\n, • Company vehicle provided\n, • Specialist tools, PPE, mobile phone, and tablet supplied\n, • Ongoing training and development opportunities\n, • 25 days holiday plus bank holidays\n, • Pension scheme and additional company benefits\n

Fire & Security Technician - £38,000 - £40,000 + Overtime & Private Healthcare Salary: £38,000 - £40,000 Basic Salary Working Hours: 42.5 Hours Per Week Industry: Fire & Security An established and expanding technical services provider is seeking an experienced Fire & Security Technician to join its growing engineering team. With a strong portfolio of commercial contracts and continued business grow... ZIPC1_UKTJ

This Mechanical Maintenance Engineer role is working with one of the UK's leading manufacturing organisations and offers a fantastic salary of £55,000 plus a performance bonus, excellent industry benefits including pension match to 10% and fantastic overtime opportunities. \n Based near the area of Whittlesey, the role is 4 on 4 off days and nights, however, currently the nights are from 10am to 10pm... \n \n ZIPC1_UKTJ

Electrical Maintenance Engineer (Nights)£46,000 - £47,000 + Night Shift Allowance + Overtime OTE 60k + Healthcare + 23 Days HolidayPeterboroughAre you an Electrical Maintenance Engineer from a manufacturing background seeking a new challenge with a market-leading company, receiving specialist PLC training with state-of-the-art machinery?In this nights-based role you will be working on a wide range of brand new and refurbished manufacturing machinery, both mechanically and electrically. This will include 3-phase motors, drives, gearboxes, pneumatics, and PLCs with training given if needed.Founded over 25 years ago, this manufacturer has risen to the top in their niche market and pride themselves on being the UK's number one in their field. With multiple sites across the UK, they have recently moved to this large new production facility and invested heavily into the machinery.This role would suit a Maintenance Engineer who is looking to work nights for a large, reputable company who will further their skill set with ongoing training on a range of equipment.The Role:Planned and reactive maintenance on manufacturing machineryWorking on 3-phase motors, drives, hydraulics, gearboxes, and PLCsTraining given through shadowing and courses to fill in skill gapsSunday to Thursday, 10pm - 6amOvertime paid at 1.5xThe Person:Maintenance EngineerManufacturing backgroundElectrical experienceReference Number: BBBH25693abMaintenance, Engineer, Engineering, Technician, Manufacturing, Electrical, Mechanical, Machinery, Shifts, Night, Nights, Shift, Holbeach, Peterborough, Huntingdon, Stamford, Market DeepingIf you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

The Role We have an exciting opportunity for a permanent Electrician to join us on our responsive repairs team at the Amplius Housing branch. This is covering a patch of social housing properties which are based in Peterborough and stretch across to Leicestershire so travel across the A47 Corridor is essentialThe Office is based in Rushden and you will be expected to attend this site for training and monthly meetings The core working hours are Monday to Friday Start at 8am-4:30pm. + Generous paying ON CALL rota 1 in every 6-8 weeks ( This covers a wider patch across Northamptonshire for the week you are on call)You will be responsible for carrying out all aspects of maintenance and repairs on all electrical engineering services as required, ensuring all work is undertaken to a high standard with the minimum of Supervision. You will take ownership of work, aiming for 'First time Fix' on all jobs whilst remaining within budget and time parameters.The Customer Fortems successful contract with social housing provider Amplius Housing supports nearly 15,000 properties, This includes Repairs & Maintenance, Voids, Complex Works and FRA workstreams with additional Planned Works and Preventative Maintenance as well.Duties and Responsibilities The Qualified Electrician's duties and responsibilities will include the following:Installing, servicing and maintaining electrical systems and appliances in accordance with the current Edition of The IET Wiring RegulationsInstallation, repair, inspect & test electrical installations and have the ability to fill in correctly, the appropriate Electrical Certificate or Electrical Condition ReportCarry out EICRs and remedial upgrades to properties.Completing reactive maintenance work as per the specification.Advising Supervisor in a timely manner when other trades are required.Working in partnership with other operatives to complete projects.Completing daily work sheets detailing work undertaken and materials used after each job undertaken. Working in a timely and productive manner to complete projects.Provide excellent customer service to both tenants and clients.What you will need Essential criteria:C&G 2360 Part 1&2 Electrotechnical Competences plus the NVQ 3 Certificate 2356 with Technical Certs L2&3 plus the NVQ 3 Certificate or NVQ 3 2356 certificateC&G 18th Edition CertificateFull UK driving licenseDesirable but not essential:Unvented Hot Water Certificate Water Regulations Certificate Part PJIPB H&S Test Certificate with Current JIBP cardTesting & Inspecting Certificate C&G 2377 PAT CertificateBenefits Electrician benefits:We provide a company van and fuel card for work purposesAll Power Tools, Uniform and PPE providedGenerous pay for Overtime and call outs availableEligible for bonus up to 5% per annum25 days annual leave + bank holidays & your birthday off (34 days total)Pay review every year 26 weeks full pay maternity leave8 weeks full pay paternity leaveUp to £3,000 colleague referral feePrivate pensionLife InsurancePrivate healthcare and dental careCycle-to-work schemeRetail and mobile phone provider discountsDiscounted gym memberships at national and local gymsVast directory of training on bespoke in-house Learning Management SystemWho we are We are part of the Willmott Dixon group, established in 2002 Fortem provides specialist property solutions tailored to keep homes and buildings running smoothly. Our highly trained teams deliver a range of internal and external repairs as well as high quality voids, planned installations and gas services.Currently rated 4.4 on Glassdoor, 90% would recommend to a friend! Alongside our core functions, we have extensive experience in decarbonisation, specialising in making homes more energy-efficient and helping clients on their journey to become zero carbon.Our experience, commitment to best practice and exemplary quality, together with a genuine partnered approach, ensures we achieve excellent outcomes for our partners, clients and customers. We have an established track record of improving communities and creating better places for people to work and live.We are Investors in People - Gold, we believe in equality, diversity and respect for all and encourage applications from all sectors of the community.If you need any assistance with your application, please contact our teamTPBN1_UKTJ

Service & Small Works Engineer (Fire & Safety) \n Location: Peterborough, Cambridgeshire \n Salary: £35,000-£42,000 \n Hours: 08:30 – 17:00 (flexibility required),Overtime paid @ 1.5x, On call 1 every 5 weeks, £135 on call allowance with door to door paid @ 1.5x \n Full time, Permanent \n The Client \n Interaction technical has partnered with an established and growing fire and security company. Due to their exponen... \n\n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ \n \n \n \n

Nights Maintenance Engineer (Electrical)£46,000 - £47,000 + Night Shift Allowance + Overtime OTE 60k + Healthcare + 23 Days HolidayPeterboroughAre you a Maintenance Engineer with electrical experience, looking for a nights-based role within a market-leading manufacturer, offering a long-term and stable career working on an array of modern, cutting-edge machinery?In this nights-based role you will be working on a wide range of brand new and refurbished manufacturing machinery, both mechanically and electrically. This will include 3-phase motors, drives, gearboxes, pneumatics, and PLCs with training given if needed.Founded over 25 years ago, this manufacturer has risen to the top in their niche market and pride themselves on being the UK's number one in their field. With multiple sites across the UK, they have recently moved to this large new production facility and invested heavily into the machinery.This role would suit a Maintenance Engineer with electrical experience, looking to work permanent nights for a long-standing a highly reputable company.The Role:PPM and RM on a mix of old and new machineryWorking on 3-phase motors, drives, hydraulics, gearboxes, and PLCsTraining given through shadowing and courses to fill in skill gapsSunday to Thursday, 10pm - 6amOvertime paid at 1.5xThe Person:Maintenance EngineerElectrical experienceLooking to work nightsReference Number: BBBH25693aMaintenance, Engineer, Engineering, Technician, Manufacturing, Electrical, Mechanical, Machinery, Shifts, Night, Nights, Shift, Holbeach, Peterborough, Huntingdon, Stamford, Market DeepingIf you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Location: Field-based / Remote, with travel across Europe and the Middle EastSalary: competitive DOE, plus overtime and overseas travel allowancesAre you an experienced Field Service Engineer, Commissioning Engineer, Service Technician or Multi-Skilled Engineer looking for a high-earning international role with major project exposure, overtime and excellent benefits?This is a standout opportunity to join a global engineering business delivering advanced combustion, fired equipment and environmental technology solutions to customers across the oil, gas, petrochemical, power generation and industrial sectors.The role will involve commissioning, troubleshooting, maintenance, fault analysis and installation supervision on highly engineered combustion and fired equipment across Europe and the Middle East.This is ideal for someone who enjoys technical problem-solving, international travel, working on customer sites and taking ownership of complex engineering challenges.Whats in it for you?Salary of £50,000 £60,000Overtime availableOverseas travel allowance: £50 per night in EuropeOverseas travel allowance: £100 per night in high-risk countries2 x annual bonus schemes12% employer pension contribution27 days holiday plus bank holidaysBUPA private healthcareMedicash healthcare supportCritical illness coverEmployee Assistance ProgrammeGym membership / wellbeing benefitsLife insuranceProfessional training and development opportunitiesInternational travel across Europe and the Middle EastOpportunity to work with world-class engineering teamsSupportive, safety-driven working cultureRegular social events and strong team environmentThe RoleAs a Field Service Engineer / Commissioning Engineer, you will carry out site-based commissioning, maintenance, troubleshooting and technical support on combustion and fired equipment.You will work closely with customers, end users and internal engineering teams to ensure equipment is commissioned, maintained and supported safely, effectively and professionally.The role will involve extensive travel, potentially over 200 days per year, usually for periods of 12 weeks at a time, with some longer trips of up to 6 weeks depending on project requirements.Key responsibilities will include:Carrying out on-site commissioning, maintenance, troubleshooting and fault analysisSupporting installation supervision and retrofit equipment activitiesWorking on combustion and fired equipment including flare systems, boiler burners, process burners, thermal oxidisers and vapour recovery systemsPreparing RAMS, site visit reports, timesheets and client documentationReading and interpreting P&IDs, electrical schematics and mechanical drawingsSupporting site turnarounds, outages and service contractsDelivering technical training to end-user personnel both on site and in classroom settingsIdentifying opportunities for aftermarket spares, service support and additional customer solutionsBuilding strong relationships with customers and end usersWorking safely at all times in line with company and customer health and safety proceduresAbout YouYou will need to be a practical, hands-on Field Service Engineer or Commissioning Engineer with strong technical capability and the flexibility to travel extensively.This role could suit someone from combustion, oil and gas, petrochemical, power generation, process plant, industrial services, controls, mechanical, electrical, instrumentation or multi-skilled engineering backgrounds.You will ideally have:Experience as a Field Service Engineer, Commissioning Engineer, Service Engineer, Multi-Skilled Engineer or Service TechnicianStrong mechanical, electrical, instrumentation or controls knowledgeExperience with PLC control systems, fault finding or industrial control systemsAbility to read P&IDs, electrical schematics and mechanical drawingsExperience working on process plant, combustion systems, fired equipment, burners, flares, thermal oxidisers, boilers or similar industrial equipmentStrong fault-finding and troubleshooting skillsGood verbal and written communication skillsStrong computer skills for reports, RAMS, timesheets and documentationA proactive, self-motivated approachWillingness to travel extensively across Europe and the Middle EastConfidence working at height, in confined spaces and potentially offshore environmentsStrong commitment to health and safetyUseful but not essential:Previous combustion experienceOil and gas, petrochemical, refinery, power generation or energy sector experienceExperience supervising outages, turnarounds, installations or retrofit projectsTime-served background working away from homeExperience delivering customer training or site-based technical supportLocation / TravelThis is a field-based / remote role involving extensive international travel across Europe and the Middle East.The companys UK base is in the Stamford / Oakham / Rutland area, but candidates with the right field service, commissioning and travel flexibility will be considered from a wider UK location.Candidates must be comfortable with regular overseas travel, periods away from home and working on customer sites in demanding industrial environments.Apply NowIf you are an experienced Field Service Engineer, Commissioning Engineer, Service Engineer, Multi-Skilled Engineer or Service Technician looking for a high-earning international role with overtime, travel allowances, excellent benefits and major technical variety, please apply today for immediate consideration.TPBN1_UKTJ

Electrical Installation EngineerWe are currently seeking a hardworking and resourceful Electrical Installation Engineer to join our dynamic team of highly skilled Engineers. The role requires a self-motivated, practical problem solver with good communication skills.A key activity for this role will be to survey, install, commission and support site based control systems and equipment for one of our key clients. Predominantly electrical biased but there will be some elements of PLC programming (training will be provided). You could be working alone but other times with another engineer or as part of a team. The candidate will be responsible for ensuring work is completed to the highest standard within agreed deadlines.Whilst the majority of the work will be within standard working hours this operational role requires you to be flexible and will involve extensive travel to sites (approx. max of 3 hours away). Some time away from home is to be expected but it is not planned to exceed 20% of the working week. Hotels will be provided for any commute times over 1.5 hours.Full-time position (08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays)What we are looking for:Electrical qualifications C&G, BTEC, NVQ3, ONC or HNC/HND, 18th edition required.ECS Gold card holderPrevious experience in a service & support, electrical installation or maintenance role.Electrical design including EPlan, AutoCAD or equivalent would be advantageous.Control Panel design, manufacture or electrical installation skills.Experience of equipment installation and commissioning such as PLC'sWhat we require from you:A minimum of 2 years of practical experiencePervious solid understanding of electrical diagrams for control panel wiring or electrical installation.Level 3 Electrical Installation (2365)Level 3 Requirements for Electrical Installations (BS7671:2018)Good verbal and written communication skillsClean UK Driving LicenseMust be eligible to work in the UKWhat you will get in returnAuto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired)25 days holiday (rising to 30 days after 5 years service)Private Health Scheme (after 1 year service)Death in Service Plan (after 5 years service)Access to our Wellbeing programme operated through COGG (https://www.coggroup.co.uk)Access to our Training Hub (various training courses available)Free parking at all our offices (Subject to availability & any company parking policies or parking rotas that may be in effect)Access to company vans or pool cars (company car scheme also available)Access to Perkbox (https://join.perkbox.co.uk) This gives employees access to discounted shopping, eating out, cinema and even holidaysFree social events, team building days and Christmas party weekend break (partners included).TIL / Overtime and expenses schemeAdsyst hold key worker statusOur companyAt Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance.Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions.At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background.Join us to contribute to our vibrant culture and make a difference!Other positions are available in this office, as well as our other offices within the UK. Please see our website for more information at : www.adsyst.co.ukTPBN1_UKTJ

Maintenance engineer, £57,500 + bonus paid monthly – up to 3k annually + 10% company pension contribution + 29 days annual leave + overtime with OTE over 60K + fantastic share saver scheme + cycle to work scheme + gym membership discounts. \n Whittlesey, 4 on 4 off Days only \n Why join our client? \n\n • Fantastic employee engagement - over 300 employees have been with the business over 25 years.\n, • Real career pr...\n\n \n ZIPC1_UKTJ

Field Service Engineer (Generators) \n £40,000 + Overtime (44k OTE) + Training + Van + 33 Days Holiday \n Peterborough \n Are you a Service Engineer from an electrical background, looking to join a rapidly growing company that will provide tailored training with optional overtime to further boost your earnings? \n In this role you will be covering a national patch to carry out both planned and reactive maintenanc... \n \n \n ZIPC1_UKTJ

Winterhalter is seeking experienced service technicians to join our team striving to deliver ‘Best in Class’ service to our valued customers. In particular, we are interested in identifying new technicians living in / able to service the areas in and around Twickenham and Kingston upon Thames, The role is generally independent but is supported by a Regional Operations Manager and an allocation team to schedule daily calls. Operating with the use of Company van (with reasonable private use) including fuel card, laptop, and mobile phone. Core hours are 40 hours per week (door to door), Monday to Friday, plus 12 Saturdays and 4 Sundays per calendar year based on a rota. Our service division is a customer-facing function in a very demanding industry; dealing with some of the leading restaurants in the UK as well as a variety of casual dining chains, hotels, educational establishments, hospitals, government buildings, and offices. Winterhalter’s growth agenda is reliant on the continuous improvement of our service offering to strengthen customer engagement and win new business. This role demands high standards of customer engagement to deliver commercially focused service to support the success of Winterhalter & Classeq brands and our valued customers in line with agreed service levels and targets. Main accountabilities Responsible for installation, service, and repair of commercial warewashing equipment such as under-counter, pass-through, and rack conveyor dishwashers. The goal is to drive service success that improves customer satisfaction, maximizes customer retention, increases profitability, and provides exemplary standards of service and customer support during field visits. Day to day activities: • Manage all on-site installation, diagnosis, repairs, and maintenance, • Diagnose errors and technical problems and determine appropriate solutions, • Produce timely and detailed service reports, • Document processes and follow company standard procedures and protocols, • Collaborate with the technical team and share information across the organisation, • Evaluate customer requirements and make appropriate recommendations, • Taking ownership and responsibility for the delivery of the agreed goals and targets:, • Response times, • First-time fix, • Customer satisfaction, • Stock management, • Productivity, • Effective teamwork Skill & experience required: • As technicians will be working with single and 3 phase equipment - electrical competence is essential, • Excellent written and verbal communication, • Strong analytical and problem-solving skills, • Ability to troubleshoot, test, repair, and service technical equipment, • Excellent organisation and computer skills, • Familiarity with mobile tools and apps, • Proven field service experience, • Direct experience in the warewash and/or catering industry is highly desirable The ideal person to suit this role: • Able to manage time and work under pressure to tight deadlines, • Able to manage the demands of numerous tasks, • Ability to adapt quickly in a rapidly changing environment, • Keen for new experiences, responsibility, and accountability, • Capability to coach customers in the effective use and maintenance of equipment, • Reliable, tolerant and determined, • Self-driven, positive outlook, clear focus and an empathic communicator, able to see things from the other person's point of view, • Willing to undertake further training to fulfill the requirements of the role, • Pays great attention to H&S protocols, • Is diligent in complying with reporting requirements Hours of work & benefits • Core hours: 40 hours per week, Monday to Friday, plus 12 Saturdays and 4 Sundays per calendar year based on a rota, • Competitive salary for core hours + potential overtime, • Company van (with use privately) including fuel card, • Comprehensive training, • 33 days annual leave - including bank holidays (increasing with length of service), • Pension & Life Assurance, • Lifeworks employee assistance plan and discount scheme, • Salary Sacrifice - Electrical Car Scheme, • Staff events Equal Opportunities employer

VUE Group: As industry-leaders in fleet risk management solutions, we're more experienced and proactive than other providers. The result is you get tangible results in both safety improvements and cost savings sooner. Our vehicle hardware has been developed over the 20 years we’ve been working in this field, and our easy-to-use software systems give you insights quickly, so you can make improvements sooner. All developed in-house, you have the ease of one reliable place to go. Are you a talented CCTV & vehicle telematics installation engineer looking for a new challenge? We have the perfect opportunity for you to join our dynamic team! Package: • £33k-£35k salary., • Mon-Friday, Overtime, weekend work., • Average OTE £42k+, • London living wage allowance, 3.5-7%, • Paid Door to door., • Yearly bonus scheme., • Length of service scheme., • Company events., • Sick pay., • Pension. Requirements: • x1 Saturday per month. Allowances: • Breakfast., • Uniform., • Boots., • Trousers., • Van cleaning., • Van replacement scheme., • Tool replacement scheme., • Cold weather packs., • Works laptop, phone, iPad., • Van C/w Racking, Livery, dead locks., • Ability to demonstrate good attention to detail, good judgment and showing logical decision making, • Hands-on individual that is happy to ‘rollup their sleeves’ and resolve any problems or issues that may arise within the department, • Team player who is confident and a self-starter, with the ability to operate in a dynamic environment, • Proven ability to work under pressure and to tight deadlines, • Initiative and problem solving ability, a pro-active approach and “can do” attitude, • A strong desire to effect continuous improvements to the systems and processes, • Good planning and organisational skills, • Willing to stay away overnight, • Excellent communication and listening skills, • A polite, confident and friendly manner, • Flexibility and quick thinking, • To be well-organised and diligent, even under pressure, • High level of knowledge of VUE products and different vehicle types What were looking for: • Experience in CCTV and vehicle telematics installation., • Strong problem- solving skills and attention to detail., • Excellent communication skills., • Self-motivated with great organizational skills., • Flexible and open to change. Key Responsibilities: • Installation of new CCTV and telematics systems., • The repair of CCTV and telematics systems., • Focus on customers needs and satisfaction, continuously building on and enhancing relationships with customers well on site., • On time completion of job sheets and admin work., • Engagement and proactively working towards your booked schedule of work. Benefits: • Company car, • Company events, • Company pension, • Employee discount, • Financial planning services, • Health & wellbeing programme, • Referral programme, • Sick pay Schedule: • 8 hour shift, • Monday to Friday Experience: • Vehicle Camera Installation: 2 years (required) Work Location: On the road #LI-JW1 Still Curious? If you feel we are a good match for each other, you can apply online now! If you’d like to understand more about the role or life at Radius before applying, then please contact our talent team via _. Radius is an equal opportunities employer. We are committed to welcome people regardless of age, disability, gender identity, race, faith or belief, sexual orientation or socioeconomic background. We are committed to ensuring an inclusive and accessible recruitment process for all candidates. If you require any adjustments or accommodations at any stage of the process, please let us know, and we will do our best to support you. We reserve the right to close a vacancy before the closing date in the event of an overwhelming response or a change in business priorities. Note to recruitment agencies: We do not accept speculative recruitment agency CVs or profiles. Any unsolicited CV received by Radius will be treated as a gift and not eligible for an agency fee. PSL agencies should only send CVs via our Applicant Tracking System, when approved to do so by the Radius Talent Team.

We are looking for an experienced 3rd line IT Support Engineer who is looking to join a well-established and growing IT provider. Role 3rd Line IT Support Engineer Location Remote with travel to Barnsley office and customer related travel Salary Up to £42k with full expenses - overtime & out of hours pay and bonus General Career progression, great benefits and a supportive experienced team. The Role This is a key role for the 3rd Line IT Support Engineer within the UK Technical function covering Cloud & Server infrastructure and systems. Project Delivery Working alongside the delivery team you’ll be primarily assigned to the delivery of customer projects, this will anything from a 50 users O365 migration through to a domain rationalisation exercise with cloud migration. Typical duties will include creation of cloud / server solutions (physical and virtual / cloud) designs based upon client requirements. Active Directory designs and migration. Creation of implementation and test plans for delivery. Implementation of network solutions with post implementation support. Handover of project delivery to Service Desk and, where required, training of Service Desk Analysts. Service Desk Act as 3rd Line escalation point for Service Desk incident tickets. Investigation and resolution of allocated Incident Tickets and Event Notifications with agreed client Incident Categorisations with associated Service Level Agreements. • Be an escalation point for service desk tickets for 3rd line escalations., • Accountable for tickets assigned for investigation, resolution, customer communications and SLA escalation Ownership an input to solution designs at all levels (High Level, Low Level and Technical) • Creation of test plans to ensure required quality of implementations, • Creation of deployment plans to meet customer requirements and provide relevant levels of risk management, • Implementation of agreed and approved solutions to agreed quality standard within specified timelines, • Creation and maintenance of all required Documentation and knowledge base articles, • Providing senior technical input, to internal and customer meeting The Person • You will be motivated, customer centric and a strong communicator at all levels., • It is important that you are qualified in server or a cloud-based qualification., • Desirable to have MCSP or equivalent experience but not essential, • A bonus would be any experience in CCNA or Network, VMware, VCP or any cloud fundamentals like Azure/AWS or Google, but these are not essential. Apply now to find out more and join a fantastic business with long term and loyal clients, where you can grow your career and opportunities. Red Rhino Solutions - A Rare Breed We work exclusively with our clients to hire the best talent in the market for our hand-picked clients. We only work on select roles for select clients so you can apply for an honest and straight forward discussion and interview process. Follow us on LinkedIn to see other roles.

Your Future Starts Here – Join the MKFS Talent Network Are you looking for your next opportunity in a company that values safety, innovation, and career growth? At MKFS, we’re always on the lookout for passionate, skilled, and driven individuals who want to make a real impact. Whether you're an experienced engineer, a customer service superstar, a project manager, or just starting out in the fire suppression industry—we want to connect with you. Why Join Our Talent Network? • Priority Access – Hear about roles before they go live, • Tailored Matches – We’ll reach out when a role aligns with your skills and ambitions, • Career Growth – Be part of a company that invests in your development, • Explore Opportunities – From engineering and operations to customer service and support, we offer a wide range of career paths, • Real Impact – Work with a team that makes a difference every day, • No Commitment – Registering your interest doesn’t tie you to anything – it simply keeps you in the loop Who We’re Looking For • We welcome applications from individuals across all backgrounds and experience levels. Whether you're an engineer, a customer service specialist, a project manager, or someone with a passion for fire and security services, we want to connect with you. How to Join • Click to submit your details and tell us a bit about your experience and career goals. Our Talent Acquisition team will be in touch when suitable opportunities arise. Our Commitment to Attracting, Rewarding & Retaining Talent_ At Marlowe Kitchen Fire Suppression, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary, • Overtime - Double pay at weekends, triple pay on bank hoildays_ (role specific), • £150 per week call-out (role specific), • Travel Time (role specific), • Commission (role specific), • Royal London Pension, • Life Assurance 4x Salary, • Paid Holidays plus Bank Holidays, • Paid Candidate Referral Scheme – up to £1,000 per referral, unlimited referrals., • Mental Health & Well-being Scheme, • Employee Recognition Scheme, • Free, secure, onsite parking, • Development and progression opportunities You will be provided with an Air-conditioned company van, smartphone, and all the specialist tools needed to provide a professional service to our customers. A Little More About Marlowe Kitchen Fire Suppression At our core, we are a small, regionally focused business that prides itself on delivering a bespoke and reactive service. Our clients receive undivided attention and dedication, ensuring their needs are met with precision and care. Yet, we have the luxury of being part of a larger group of businesses within the Fire Protection, Security, and Building Management Systems industry. This connection allows us to share best practices, access learning and development academies, and benefit from Human Resource specialists and industry knowledge. This synergy ensures we are constantly improving and staying ahead in the critical service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Equal Opportunities At Marlowe Kitchen Fire Suppression, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered

We are looking for an experienced Infrastructure Engineer who is looking to join a well-established and growing IT provider. Role Infrastructure Engineer Location Remote with travel to Barnsley office and customer related travel Salary Up to £42k with full expenses - overtime & out of hours pay and bonus General Career progression, great benefits and a supportive experienced team. The Role This is a key role for the Infrastructure Engineer within the UK Technical function covering Cloud & Server infrastructure and systems. Project Delivery Working alongside the delivery team you’ll be primarily assigned to the delivery of customer projects, this will anything from a 50 users O365 migration through to a domain rationalisation exercise with cloud migration. Typical duties will include creation of cloud / server solutions (physical and virtual / cloud) designs based upon client requirements. Active Directory designs and migration. Creation of implementation and test plans for delivery. Implementation of network solutions with post implementation support. Handover of project delivery to Service Desk and, where required, training of Service Desk Analysts. Service Desk Act as 3rd Line escalation point for Service Desk incident tickets. Investigation and resolution of allocated Incident Tickets and Event Notifications with agreed client Incident Categorisations with associated Service Level Agreements. • Be an escalation point for service desk tickets for 3rd line escalations., • Accountable for tickets assigned for investigation, resolution, customer communications and SLA escalation, • Ownership an input to solution designs at all levels (High Level, Low Level and Technical), • Creation of test plans to ensure required quality of implementations, • Creation of deployment plans to meet customer requirements and provide relevant levels of risk management, • Implementation of agreed and approved solutions to agreed quality standard within specified timelines, • Creation and maintenance of all required Documentation and knowledge base articles, • Providing senior technical input, to internal and customer meeting The Person • You will be motivated, customer centric and a strong communicator at all levels., • It is important that you are qualified in server or a cloud-based qualification., • Desirable to have MCSP or equivalent experience but not essential, • A bonus would be any experience in CCNA or Network, VMware, VCP or any cloud fundamentals like Azure/AWS or Google, but these are not essential. Apply now to find out more and join a fantastic business with long term and loyal clients, where you can grow your career and opportunities. Red Rhino Solutions - A Rare Breed We work exclusively with our clients to hire the best talent in the market for our hand-picked clients. We only work on select roles for select clients so you can apply for an honest and straight forward discussion and interview process. Follow us on LinkedIn to see other roles.

CNC Turner (Programming) £34,000 - £39,000 + Overtime (OTE £60,000) + Progression + Days Based Chard Are you a CNC Turner with experience in programming using Mazatrol or Fanuc controls, looking for a days-based role with optional overtime to boost your earnings significantly? In this role, you will be responsible for programming, setting, and operating CNC turning machines, including both sliding head and fixed head lathes. You will also perform routine maintenance on the machines and use a range of precision measuring instruments such as callipers, micrometres, and CMMs to verify that all components meet specifications. This company has recently received substantial investment to support its ambitious expansion plans. With over 50 state-of-the-art machines like 5-axis milling centres, sliding head lathes, and the latest CNC technology, they are positioned for long-term success. With a clear goal to triple their turnover by 2030, it is an exciting time to join the company. This role would suit a CNC turner with experience in programming using Mazatrol or Fanuc controls, looking for a days-based role with a well-established company with plenty of optional overtime. The Role: • Programming, setting, and operating CNC turning machines, • Carrying out routine maintenance on CNC equipment, • Using precision measuring tools to ensure compliance with specifications, • Mon - Thurs: 8am - 5pm, Fri: 8am - 1pm or Mon - Fri, 6am - 2pm The Person: • CNC Turner, • Experience in programming using Mazatrol or Fanuc controls Reference Number: BBBH20617 CNC, Turner, Programmer, CNC, Machinist, Manufacturing, Engineering, Production, Apprentice, Chard, Taunton, Yeovil, Operator, Mazatrol, Fanuc If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a C++ Software Engineer subcontractor on an initial 12 month contract, with very likely extension. The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Candidates with a strong C++ Software Engineering / Embedded Software Engineer background ideally from the Defence / Aerospace industry would be suitable for this position. Rate: £67.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote working: The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Job Description: By embracing the latest software technologies and methods the Development Simulation software department delivers exceptional software solutions for non-production based test systems that meet the unique requirements of the prime software development teams. In addition we also provide equipment simulation systems to support product integration as well as software to support and assist the manufacturing process. The successful candidate will join the development team responsible for building and integrating real-time test and data capture systems. The role will focus on developing and maintaining software in a Linux environment, working closely with high-speed multi-channel SFPDP cards, real-time data flows, and complex multi-threaded processing pipelines. Proficient in C++ and with knowledge of C#, you will play a critical part in the design, development, integration, and verification of test software solutions that are central to our system validation and delivery capabilities. Responsibilities: • Design and develop real-time test and capture software on Linux systems using C++., • Integrate and interface with high-speed SFPDP cards across multi-channel data pipelines., • Architect and implement robust, scalable, and maintainable multi-threaded applications., • Define and implement data sequencing and synchronisation logic to support deterministic capture and replay., • Work with hardware teams to ensure seamless integration and timing alignment between software and capture cards., • Lead and contribute to system integration, verification, and testing at both component and system levels., • Conduct performance analysis, debugging, and optimisation of real-time systems., • Document architecture, interface definitions, and test procedures to support handover and formal test activities. Skillset/experience required: • Extensive experience in C++ development in a Linux environment., • Proficiency in C# for tooling, test interfaces, or Windows components as needed., • Proven experience working with real-time data systems, preferably involving SFPDP or other high-speed digital protocols., • Demonstrable skills in multi-threaded and concurrent programming., • Experience with low-level I/O, DMA, or driver-level interactions with PCIe cards or similar., • Familiarity with software sequencing frameworks or custom state machines for test execution., • Strong experience with integration, system test, and debugging complex interactions between software and hardware., • Strong understanding of software design principles, memory management, and performance optimisation., • Experience with version control systems (e.g., Git) and CI/CD Desirable Skills: • Experience with SFPDP (Serial Front Panel Data Port) specifically in defence, aerospace, or data acquisition contexts., • Knowledge of FPGA-based data acquisition systems and synchronisation methods., • Familiarity with unit testing frameworks, automated test rigs, or hardware-in-the-loop (HWIL) setups., • Experience developing or integrating with real-time operating systems (RTOS) or using real-time Linux extensions.

An opportunity has arisen for a UPS Engineer to join is a specialist power solutions provider, delivering installation, servicing and maintenance of critical backup systems across a range of industries throughout the UK. As a UPS Engineer, you will be responsible for installing, maintaining and fault-finding on UPS systems across client sites, primarily in southern and central England. Location: Ideal candidates will be based anywhere between Oxford and the South of England, including counties such as Oxfordshire, Berkshire, Buckinghamshire, Hampshire, Surrey, West Sussex, East Sussex, Kent, Greater London, Wiltshire, Gloucestershire, Somerset, Middlesex You will be responsible for: • Attending client sites to carry out service, repair and fault diagnosis on UPS systems and associated equipment, • Supporting installations and commissioning of UPS and battery systems, • Performing battery impedance tests and replacements, • Conducting load bank testing, site surveys and standby power inspections, • Providing breakdown support and troubleshooting for critical electrical systems, • Supervising subcontractors and apprentices during on-site works, • Assisting the project and sales teams with technical input and resource estimates, • Documenting electrical test results and compliance paperwork What we are looking for: • Previously worked as a UPS Engineer, Field Service Engineer, Power Systems Engineer, Electrical Engineer, Critical Power Engineer, Uninterruptible Power Supply Engineer, Battery Systems Engineer, Service & Maintenance Engineer, Electrical Field Engineer, UPS Installation Engineer, Backup Power Engineer, Site Service Engineer, Commissioning Engineer, Emergency Power Engineer, Power Electronics Engineer, Electrician, • Proven experience of servicing and installing Uninterruptible Power Supply (UPS) systems, • 18th Edition or equivalent electrical qualification, • Willingness to travel nationally and stay overnight where required (expenses covered), • Valid CSCS or ECS card, • Full UK Driving Licence What’s on offer: • Competitive salary, • Door-to-door pay, • Overtime opportunities, • Flexible start and finish times,, • 25 days annual leave plus Bank Holidays, • Company van and fuel expenses, • Pension scheme, • On-site parking, • Ongoing training and development This is a fantastic opportunity for a UPS engineer to join a growing team in a rewarding, field-based engineering role. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.

We are seeking an experienced and dedicated Field Service Engineer to join our team. The Field Service Engineer will be responsible for surveying, repair, set-up, service and providing technical support in the field to Customers, Engineers and Installers for all Grant products. Having qualifications in OFTEC, F Gas, Unvented hot water and Part P would be highly advantageous. Field Support Area : Post Codes PA, FK and G (Paisley, Falkirk and Glasgow) Duties & Responsibilities: • Attend site to carry out repair work on products covered by the manufacturer’s warranty., • When required carry out site survey and commissioning of Grant Engineering products., • Promote Customer Satisfaction throughout the department/Company ensuring that all our customers receive a valued service., • Advise customers, installers, and commissioning engineers on product installation., • Dealing with Technical issues, administration and correspondence on a day-to-day basis., • Assist in the management of your diary including providing up to date local / logistical information for your area., • Bringing matters of disrepute to FSM., • Carrying out a substantial amount of driving on a daily basis with overnight stays when required., • Responsible for the correct use of tools and equipment on and off site and ensure that appropriate Health and Safety guidelines are followed., • Provide on-site / In-house training / Assessments as requested by the company., • Identify Technical / Service trends and report all concerns to the FSM., • Identify potential sales leads (3 or more units) and pass details to relevant Area Sales Manager., • Encourage In-House training programmes for suspect Engineers / Installers by referring either to training Administrator or to the relevant Area Sales Manager., • Keep up to date with current legislation regarding Oil Fired Boilers, Air source heat pumps, Biomass, Smart controls, Solar thermal & unvented hot water and the Installation, Service and Commissioning of the appliances., • Keep up to date with new in-house developments and attend internal training programmes as required., • Ensure all Professional Qualifications are kept up to date. Our Engineers cover the following disciplines, and specific training will be provided: • Oil boilers Solar Thermal, • Air Source Heat Pumps Unvented cylinders, • Biomass Smart controls After successful completion of 2 – 4 months training you will work at least 20 Saturdays / annum either as overtime or in lieu of a weekday. Based on a 5-day working week.

We are seeking an experienced and dedicated Field Service Engineer to join our team. The Field Service Engineer will be responsible for surveying, repair, set-up, service and providing technical support in the field to Customers, Engineers and Installers for all Grant products. Having qualifications in OFTEC, F Gas, Unvented hot water and Part P would be highly advantageous. Field Support Area : Post Codes PE and NR (Peterborough and Norwich) Duties & Responsibilities: • Attend site to carry out repair work on products covered by the manufacturer’s warranty., • When required carry out site survey and commissioning of Grant Engineering products., • Promote Customer Satisfaction throughout the department/Company ensuring that all our customers receive a valued service., • Advise customers, installers, and commissioning engineers on product installation., • Dealing with Technical issues, administration and correspondence on a day-to-day basis., • Assist in the management of your diary including providing up to date local / logistical information for your area., • Bringing matters of disrepute to FSM., • Carrying out a substantial amount of driving on a daily basis with overnight stays when required., • Responsible for the correct use of tools and equipment on and off site and ensure that appropriate Health and Safety guidelines are followed., • Provide on-site / In-house training / Assessments as requested by the company., • Identify Technical / Service trends and report all concerns to the FSM., • Identify potential sales leads (3 or more units) and pass details to relevant Area Sales Manager., • Encourage In-House training programmes for suspect Engineers / Installers by referring either to training Administrator or to the relevant Area Sales Manager., • Keep up to date with current legislation regarding Oil Fired Boilers, Air source heat pumps, Biomass, Smart controls, Solar thermal & unvented hot water and the Installation, Service and Commissioning of the appliances., • Keep up to date with new in-house developments and attend internal training programmes as required., • Ensure all Professional Qualifications are kept up to date. Our Engineers cover the following disciplines, and specific training will be provided: • Oil boilers Solar Thermal, • Air Source Heat Pumps Unvented cylinders, • Biomass Smart controls After successful completion of 2 – 4 months training you will work at least 20 Saturdays / annum either as overtime or in lieu of a weekday. Based on a 5-day working week.

Project Engineer - Covering the North West & North UK As one of the fastest-growing companies in the industry, we pride ourselves on our ability to deliver excellence—from the initial design to long-term maintenance. Our employees are our greatest asset, and we empower them with the tools they need to succeed. With Marlowe Fire & Security, you will enjoy a vibrant company culture, career progression opportunities, and a comprehensive benefits package including a competitive salary, vehicle allowance, and more! Basic Salary – up to £38,000 per annum Pension, Life Assurance & much more. – Please see our generous remuneration packages below Marlowe Fire & Security’s Project Engineer’s Take the lead in technically engineering, installing, and managing a diverse range of projects—both large and small—across the Marlowe portfolio. As a Project Engineer, you’ll play a pivotal role in planning and delivering projects and commissioning works, all while working closely with key clients to meet critical deadlines. Your focus will be on ensuring each project runs smoothly and profitably, with an unwavering commitment to health, safety, and quality in line with company standards. • Ensure project delivery aligns with the agreed programme timeline, proactively escalating any delays to the Project Manager., • Conduct technical reviews and process project orders through the Sales Order Processing system, forwarding requirements to the Purchasing Department., • Safeguard Marlowe’s commercial interests by maintaining clear and professional correspondence with customers regarding project delays and arising issues., • Plan, coordinate, and manage labour and material resources to ensure successful project delivery., • Allocate all necessary Risk Assessments, Method Statements, and engineering documentation to site teams, and verify that commissioning is completed in accordance with British Standards upon project completion., • Provide technical guidance and support to installation teams as required throughout the project lifecycle., • Attend site meetings and liaise with designers and customers to manage and implement design variations., • Manage assigned engineers and subcontractors, including oversight of timesheets, holiday schedules, and overall performance., • Monitor and report on the profitability of assigned projects, ensuring financial targets are met and reporting key metrics to the Project Manager., • Oversee on-site health and safety compliance, conducting regular audits and ensuring adherence to all safety protocols., • Ensure strict compliance with Marlowe’s Quality Management Systems, Processes, and Health, Safety & Environmental (HSE) standards. Who We’re Looking For Marlowe Fire & Security consider our people our greatest asset. All we ask is that every Team Member take pride in what they do and demonstrate commitment to delivering the highest level of service to both external and internal customers. Therefore, in addition to having all the usual attributes of a great Marlowe Fire & Security employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • Over 5 years of experience in the fire and security industry, with a focus on engineering projects across single and multi-site locations, • Highly motivated and enthusiastic professional who thrives in challenging, fast-paced environments, • Strong communication skills paired with in-depth technical knowledge of major systems and complex projects, • Proven technical expertise combined with excellent interpersonal skills to drive collaboration and project success, • Track record of delivering results through effective problem-solving and a solution-focused mindset, • Willing and flexible to travel across the UK as needed to ensure timely project completion, while strictly adhering to all Marlowe health and safety standards, • Capable of working effectively under pressure, whether independently or as part of a collaborative team Our Systems Fire: Gent, Notifier, Kentec, Ziton, Advanced, Morley, C-Tec, Protec Intruder: Galaxy, Texecom, Scantronic, Menvier, Risco CCTV: Hikvision, Dahua, Bosch, Generic Analogue Systems Access Control: Paxton, PAC. Salto Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Basic Salary – up to £38,000 per annum, • Overtime, Travel Time, • Royal London Pension, • Life Assurance 4x Salary, • Paid Holidays plus Bank Holidays, • Additional Day holiday for each full year of completed service (up to 25 days), • Additional Birthday Holiday, • Paid Candidate Referral Scheme – up to £1,000 per referral, unlimited referrals., • Mental Health & Well-being Scheme, • Employee Recognition Scheme, • Development and progression opportunities A Little More About Marlowe Fire & Security We proudly operate across the nation, serving a wide range of industries in both commercial and domestic settings. Our goal is to provide fire and security solutions tailored to the specific needs of our customers. Each of our solutions is crafted to meet the unique compliance standards of the industries we serve, helping them ensure site security and protect their teams. We also enjoy the advantage of being part of a larger group within the Fire Protection, Security & Building Management Systems sector. This collaboration allows us to share best practices, access development academies, and leverage Human Resource expertise, all contributing to continuous improvement in this vital service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Marlowe Fire & Security, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Fire & Security Installation & Commissioning Engineer - Midlands based with National coverage Marlowe Fire & Security are the fastest growing fire & security business in the UK. From initial design, supply and installation, through to ongoing maintenance and monitoring, we maintain the capability to help prevent, detect and monitor Fire and Security risks for our customers up and down the country. We are currently looking to appoint a new Fire & Security Project Engineer, we're looking for someone who is Midlands-based who is happy to accommodate frequent travel as required Basic Salary – up to £34,000 per annum Pension, Life Assurance & much more. – Please see our generous remuneration packages below Marlowe Fire & Security’s Fire Systems Project Engineer’s A self-motivated Engineer role working as part of a team in the UK. The position will involve working closely with the Project Manager on all projects from inception through to completion and will involve site supervision and man management from time to time and commissioning multisystem projects within the UK. • Possess comprehensive knowledge of CCTV, Fire, Intruder, Access Control, and Nurse Call systems to support contractual and technical project reviews, working in collaboration with the Project Manager to ensure successful delivery., • Attend project sites as required to oversee progress, provide technical input, and support project execution., • Carry out commissioning, system handovers, and end-user training for small systems when necessary., • Ensure full compliance with current industry standards, delivering multi-discipline systems efficiently, on time, and within budget., • Collaborate closely with the Sales and Installation Managers to support seamless, end-to-end project delivery., • Coordinate subcontractor resources and maintain clear communication with clients throughout the project lifecycle., • Conduct technical and quality audits as needed, including supporting NSI (National Security Inspectorate) audit compliance., • Demonstrate self-motivation and the ability to manage workload effectively, working independently when required., • Apply strong time management skills, working alongside the Project Manager to continually develop and refine project coordination capabilities., • Hold a valid UK driving licence and be flexible with travel to various site locations., • Exhibit strong IT proficiency, with the ability to configure software related to fire and security system commissioning., • Take full responsibility for ensuring systems are commissioned and handed over in accordance with relevant standards, maintaining project quality and budgetary control throughout. Who We’re Looking For Marlowe Fire & Security consider our people our greatest asset. All we ask is that every Team Member take pride in what they do and demonstrate commitment to delivering the highest level of service to both external and internal customers. Therefore, in addition to having all the usual attributes of a great Marlowe Fire & Security employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • A minimum of 5 years’ proven experience within the fire & security industry, with a strong understanding of installation, commissioning, and maintenance practices., • Solid technical knowledge of major fire & security systems and involvement in complex, large-scale projects., • Experience managing and delivering engineering projects across both single-site and multi-site environments., • Demonstrated technical expertise with the ability to communicate effectively and build strong working relationships across teams and with clients., • Demonstrates energy, drive, and enthusiasm in all aspects of work., • Previous experience in a customer-facing role is preferred, with a strong focus on delivering high-quality service., • Excellent organisational and time management skills, with the ability to prioritise effectively., • Professional demeanour, with the ability to represent the company confidently and courteously., • Committed to providing exceptional customer service and ensuring client satisfaction., • Capable of working independently as well as collaboratively within a team environment., • Full UK driving licence is essential. Our Systems Fire: Gent, Notifier, Kentec, Ziton, Advanced, Morley, C-Tec, Protec Intruder: Galaxy, Texecom, Scantronic, Menvier, Risco CCTV: Hikvision, Dahua, Bosch, Generic Analogue Systems Access Control: Paxton, PAC. Salto Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary – Earn up to £34,000 per annum, with additional opportunities to increase your earnings through overtime and paid travel time., • Enhanced Pension Scheme – Plan confidently for the future with our Royal London Pension., • Comprehensive Life Assurance – Enjoy peace of mind with life cover equal to 4x your annual salary., • Generous Holiday Package – Enjoy paid holidays plus bank holidays, with an extra day added for each full year of service (up to 25 days)., • Referral Bonus Scheme – Earn up to £1,000 for each successful candidate referral – and there’s no limit to how many referrals you can make., • Mental Health & Wellbeing Support – Access dedicated wellbeing resources, tools, and support as part of our employee wellness programme., • Employee Recognition Programme – Be rewarded and celebrated for your contribution through our structured recognition initiatives., • Career Growth & Development – Unlock your potential with ongoing training, professional development, and clear opportunities for progression. A Little More About Marlowe Fire & Security We proudly operate across the nation, serving a wide range of industries in both commercial and domestic settings. Our goal is to provide fire and security solutions tailored to the specific needs of our customers. Each of our solutions is crafted to meet the unique compliance standards of the industries we serve, helping them ensure site security and protect their teams. We also enjoy the advantage of being part of a larger group within the Fire Protection, Security & Building Management Systems sector. This collaboration allows us to share best practices, access development academies, and leverage Human Resource expertise, all contributing to continuous improvement in this vital service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Marlowe Fire & Security, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Your Future Starts Here – Join the Marlowe Fire & Security Talent Network Are you looking for your next opportunity in a company that values safety, innovation, and career growth? At Marlowe Fire & Security, we’re always on the lookout for passionate, skilled, and driven individuals who want to make a real impact. Whether you're an experienced engineer, a customer service superstar, a project manager, or just starting out in the fire and security industry—we want to connect with you. Why Join Our Talent Network? • Priority Access – Hear about roles before they go live, • Tailored Matches – We’ll reach out when a role aligns with your skills and ambitions, • Career Growth – Be part of a company that invests in your development, • Explore Opportunities – From engineering and operations to customer service and support, we offer a wide range of career paths, • Real Impact – Work with a team that makes a difference every day, • No Commitment – Registering your interest doesn’t tie you to anything – it simply keeps you in the loop Who We’re Looking For We welcome applications from individuals across all backgrounds and experience levels. Whether you're an engineer, a customer service specialist, a project manager, or someone with a passion for fire and security services, we want to connect with you. How to Join Click to submit your details and tell us a bit about your experience and career goals. Our Talent Acquisition team will be in touch when suitable opportunities arise. Marlowe Fire & Security – Protecting What Matters. Building Careers That Last. _ Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Overtime, Travel Time & Call-out (Engineers Only), • Vehicle / Vehicle Allowance – subject to role, • Royal London Pension, • Life Assurance 4x Salary, • Paid Holidays plus Bank Holidays, • Additional Day holiday for each full year of completed service (up to 25 days), • Paid Candidate Referral Scheme – up to £1,000 per referral, unlimited referrals., • Mental Health & Well-being Scheme, • Employee Recognition Scheme, • Development and progression opportunities, • Free, secure on-site parking, • Free, on-site gym Equal Opportunities We strive to create a diverse, inclusive environment to encourage all our employees to be themselves. We celebrate what makes us unique and believe that adopting a culture of inclusion helps us to best serve our customers. We are committed to supporting equal opportunities. Please inform us if you require any reasonable adjustments to enable you to participate in the hiring process. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Fire & Security Installation Engineer - Midlands-based with National coverage Marlowe Fire & Security are the fastest growing fire & security business in the UK. From initial design, supply and installation, through to ongoing maintenance and monitoring, we maintain the capability to help prevent, detect and monitor Fire and Security risks for our customers up and down the country. We are currently looking to appoint a new Fire & Security Project Engineer, we're looking for someone who is Midlands-based who is happy to accommodate frequent travel as required Basic Salary – up to £34,000 per annum Pension, Life Assurance & much more. – Please see our generous remuneration packages below Marlowe Fire & Security’s Fire Systems Project Engineer’s A self-motivated Engineer role working as part of a team in the UK. The position will involve working closely with the Project Manager on all projects from inception through to completion and will involve site supervision and man management from time to time and commissioning multisystem projects within the UK. • Demonstrate comprehensive knowledge of CCTV, Fire, Intruder, Access Control, and Nurse Call systems, carrying out contractual and technical reviews and supporting the Project Manager throughout the project lifecycle., • Attend sites as required to support installation and project delivery activities., • Conduct system handovers and provide client training for smaller installations when necessary., • Maintain a strong understanding of current industry standards to ensure the effective delivery of multi-discipline systems on time and within budget., • Collaborate closely with the Sales Team and Installations Manager to ensure seamless, end-to-end project delivery., • Coordinate and manage subcontract labour when required, acting as a key point of contact for clients throughout the duration of each project., • Complete technical audits and undertake NSI compliance audits as requested., • Work proactively and manage your own workload, demonstrating strong initiative and problem-solving capabilities., • Demonstrate effective time management, working alongside the Manager to develop key skills that support efficient project delivery., • Utilise strong computer skills to support project documentation, reporting, and communication., • Take personal responsibility for ensuring all systems are handed over in line with current standards, best practices, and within departmental budget expectations. Who We’re Looking For Marlowe Fire & Security consider our people our greatest asset. All we ask is that every Team Member take pride in what they do and demonstrate commitment to delivering the highest level of service to both external and internal customers. Therefore, in addition to having all the usual attributes of a great Marlowe Fire & Security employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • Proven experience within the fire & security industry, with a strong understanding of installation, and maintenance practices., • Solid technical knowledge of major fire & security systems and involvement in complex, large-scale projects., • Experience managing and delivering engineering projects across both single-site and multi-site environments., • Demonstrated technical expertise with the ability to communicate effectively and build strong working relationships across teams and with clients., • Demonstrates energy, drive, and enthusiasm in all aspects of work., • Previous experience in a customer-facing role is preferred, with a strong focus on delivering high-quality service., • Excellent organisational and time management skills, with the ability to prioritise effectively., • Professional demeanour, with the ability to represent the company confidently and courteously., • Committed to providing exceptional customer service and ensuring client satisfaction., • Capable of working independently as well as collaboratively within a team environment., • Full UK driving licence is essential. Our Systems Fire: Gent, Notifier, Kentec, Ziton, Advanced, Morley, C-Tec, Protec Intruder: Galaxy, Texecom, Scantronic, Menvier, Risco CCTV: Hikvision, Dahua, Bosch, Generic Analogue Systems Access Control: Paxton, PAC. Salto Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary – Earn up to £34,000 per annum, with additional opportunities to increase your earnings through overtime and paid travel time., • Enhanced Pension Scheme – Plan confidently for the future with our Royal London Pension., • Comprehensive Life Assurance – Enjoy peace of mind with life cover equal to 4x your annual salary., • Generous Holiday Package – Enjoy paid holidays plus bank holidays, with an extra day added for each full year of service (up to 25 days)., • Referral Bonus Scheme – Earn up to £1,000 for each successful candidate referral – and there’s no limit to how many referrals you can make., • Mental Health & Wellbeing Support – Access dedicated wellbeing resources, tools, and support as part of our employee wellness programme., • Employee Recognition Programme – Be rewarded and celebrated for your contribution through our structured recognition initiatives., • Career Growth & Development – Unlock your potential with ongoing training, professional development, and clear opportunities for progression. A Little More About Marlowe Fire & Security We proudly operate across the nation, serving a wide range of industries in both commercial and domestic settings. Our goal is to provide fire and security solutions tailored to the specific needs of our customers. Each of our solutions is crafted to meet the unique compliance standards of the industries we serve, helping them ensure site security and protect their teams. We also enjoy the advantage of being part of a larger group within the Fire Protection, Security & Building Management Systems sector. This collaboration allows us to share best practices, access development academies, and leverage Human Resource expertise, all contributing to continuous improvement in this vital service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Marlowe Fire & Security, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

CNC Turner (4 day week) £34,000 - £39,000 + Overtime (OTE £60,000) + Progression + Days Based Chard Are you a CNC Turner with experience in programming using Mazatrol or Fanuc controls, looking for a 4-day week with plenty of optional overtime to boost your earnings significantly? In this role, you will be responsible for programming, setting, and operating CNC turning machines, including both sliding head and fixed head lathes. You will also perform routine maintenance on the machines and use a range of precision measuring instruments such as callipers, micrometres, and CMMs to verify that all components meet specifications. This company has recently received substantial investment to support its ambitious expansion plans. With over 50 state-of-the-art machines like 5-axis milling centres, sliding head lathes, and the latest CNC technology, they are positioned for long-term success. With a clear goal to triple their turnover by 2030, it is an exciting time to join the company. This role would suit a CNC turner with experience in programming using Mazatrol or Fanuc controls, looking for a 4-day week with a well-established company with plenty of optional overtime. The Role: • Programming, setting, and operating CNC turning machines, • Carrying out routine maintenance on CNC equipment, • Using precision measuring tools to ensure compliance with specifications, • 4-day week: Mon - Thurs: 07:45 - 18:00 The Person: • CNC Turner, • Experience in programming using Mazatrol or Fanuc controls Reference Number: BBBH20617a CNC, Turner, Programmer, CNC, Machinist, Manufacturing, Engineering, Production, Apprentice, Chard, Taunton, Yeovil, Operator, Mazatrol, Fanuc If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

We are seeking an experienced and dedicated Field Service Engineer to join our team. The Field Service Engineer will be responsible for surveying, repair, set-up, service and providing technical support in the field to Customers, Engineers and Installers for all Grant products. Having qualifications in OFTEC, F Gas, Unvented hot water and Part P would be highly advantageous. Field Support Area : Post Codes LL and SY (Llandudno and Shrewsbury) Duties & Responsibilities: • Attend site to carry out repair work on products covered by the manufacturer’s warranty., • When required carry out site survey and commissioning of Grant Engineering products., • Promote Customer Satisfaction throughout the department/Company ensuring that all our customers receive a valued service., • Advise customers, installers, and commissioning engineers on product installation., • Dealing with Technical issues, administration and correspondence on a day-to-day basis., • Assist in the management of your diary including providing up to date local / logistical information for your area., • Bringing matters of disrepute to FSM., • Carrying out a substantial amount of driving on a daily basis with overnight stays when required., • Responsible for the correct use of tools and equipment on and off site and ensure that appropriate Health and Safety guidelines are followed., • Provide on-site / In-house training / Assessments as requested by the company., • Identify Technical / Service trends and report all concerns to the FSM., • Identify potential sales leads (3 or more units) and pass details to relevant Area Sales Manager., • Encourage In-House training programmes for suspect Engineers / Installers by referring either to training Administrator or to the relevant Area Sales Manager., • Keep up to date with current legislation regarding Oil Fired Boilers, Air source heat pumps, Biomass, Smart controls, Solar thermal & unvented hot water and the Installation, Service and Commissioning of the appliances., • Keep up to date with new in-house developments and attend internal training programmes as required., • Ensure all Professional Qualifications are kept up to date. Our Engineers cover the following disciplines, and specific training will be provided: • Oil boilers Solar Thermal, • Air Source Heat Pumps Unvented cylinders, • Biomass Smart controls After successful completion of 2 – 4 months training you will work at least 20 Saturdays / annum either as overtime or in lieu of a weekday. Based on a 5-day working week.

Domestic Electric Vehicle Charging Point Installer/Domestic EV Installer/Electrician Leeds Exciting opportunity for you to broaden your skills and contribute to the green revolution. This is the perfect time to make the move into this forward thinking and fast-growing sector of the Electrical industry. We are working with the industry leader, with a vision to change the way people drive. They have made it their mission to install a charging point everywhere you park. To make that vision a reality we need the best talent in the industry - a vision Search Energy are proud to support. You will be responsible for installing and maintaining the network of EV Charging Points, in a localised area, while representing the company in a professional manner. Customer engagement and service are as important in this role as the technical skills to complete the installations. A keen attention and focus on Health and Safety is also paramount for our installers. What's in it for you? • Competitive basic salary of £37,300 - OTE £50,000+, • Annual £2000 bonus, • Overtime available, • Company hire van and fuel card, • 21 days annual leave plus 8 Bank Holiday days, • Employee Enhanced Benefits package EV Salary Sacrifice Car scheme Retail / Health / Gym and other services and discounts Help @ Hand Employee Assistance Programme - Wellbeing services and benefits • Workplace pension, • Full time employment What we are looking for in a candidate: • Be fully competent with completing electrical certificates using digital software, • An understanding of the current regulations and a focus to always remain compliant, • Able to follow safe working procedures., • Excellent customer services skills, with a friendly manner and effective communication skills. It is essential that the candidate has the following skills: • Level 3 electrical installations qualification, • Installation and termination of SWA cable, • BS 7671 :2018, 18th edition, • Minimum of 2 years Electrical Experience in domestic environment, • Full UK Driving Licence Ideally you will have: -Experience of 3 phase initial verification, inspection and testing • City and Guilds EV installation 2919 or equivalent. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.

Project Engineer - Covering NW & North Wales As one of the fastest-growing companies in the industry, we pride ourselves on our ability to deliver excellence—from the initial design to long-term maintenance. Our employees are our greatest asset, and we empower them with the tools they need to succeed. With Marlowe Fire & Security, you will enjoy a vibrant company culture, career progression opportunities, and a comprehensive benefits package including a competitive salary, vehicle allowance, and more! Basic Salary – up to £38,000 per annum Pension, Life Assurance & much more. – Please see our generous remuneration packages below Marlowe Fire & Security’s Project Engineer’s Take the lead in technically engineering, installing, and managing a diverse range of projects—both large and small—across the Marlowe portfolio. As a Project Engineer, you’ll play a pivotal role in planning and delivering projects and commissioning works, all while working closely with key clients to meet critical deadlines. Your focus will be on ensuring each project runs smoothly and profitably, with an unwavering commitment to health, safety, and quality in line with company standards. • Ensure project delivery aligns with the agreed programme timeline, proactively escalating any delays to the Project Manager., • Conduct technical reviews and process project orders through the Sales Order Processing system, forwarding requirements to the Purchasing Department., • Safeguard Marlowe’s commercial interests by maintaining clear and professional correspondence with customers regarding project delays and arising issues., • Plan, coordinate, and manage labour and material resources to ensure successful project delivery., • Allocate all necessary Risk Assessments, Method Statements, and engineering documentation to site teams, and verify that commissioning is completed in accordance with British Standards upon project completion., • Provide technical guidance and support to installation teams as required throughout the project lifecycle., • Attend site meetings and liaise with designers and customers to manage and implement design variations., • Manage assigned engineers and subcontractors, including oversight of timesheets, holiday schedules, and overall performance., • Monitor and report on the profitability of assigned projects, ensuring financial targets are met and reporting key metrics to the Project Manager., • Oversee on-site health and safety compliance, conducting regular audits and ensuring adherence to all safety protocols., • Ensure strict compliance with Marlowe’s Quality Management Systems, Processes, and Health, Safety & Environmental (HSE) standards. Who We’re Looking For Marlowe Fire & Security consider our people our greatest asset. All we ask is that every Team Member take pride in what they do and demonstrate commitment to delivering the highest level of service to both external and internal customers. Therefore, in addition to having all the usual attributes of a great Marlowe Fire & Security employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • Over 5 years of experience in the fire and security industry, with a focus on engineering projects across single and multi-site locations, • Highly motivated and enthusiastic professional who thrives in challenging, fast-paced environments, • Strong communication skills paired with in-depth technical knowledge of major systems and complex projects, • Proven technical expertise combined with excellent interpersonal skills to drive collaboration and project success, • Track record of delivering results through effective problem-solving and a solution-focused mindset, • Willing and flexible to travel across the UK as needed to ensure timely project completion, while strictly adhering to all Marlowe health and safety standards, • Capable of working effectively under pressure, whether independently or as part of a collaborative team Our Systems Fire: Gent, Notifier, Kentec, Ziton, Advanced, Morley, C-Tec, Protec Intruder: Galaxy, Texecom, Scantronic, Menvier, Risco CCTV: Hikvision, Dahua, Bosch, Generic Analogue Systems Access Control: Paxton, PAC. Salto Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary – Earn up to £38,000 per annum, with additional opportunities to increase your earnings through overtime and paid travel time., • Enhanced Pension Scheme – Plan confidently for the future with our Royal London Pension., • Comprehensive Life Assurance – Enjoy peace of mind with life cover equal to 4x your annual salary., • Generous Holiday Package – Enjoy paid holidays plus bank holidays, with an extra day added for each full year of service (up to 25 days)., • Referral Bonus Scheme – Earn up to £1,000 for each successful candidate referral – and there’s no limit to how many referrals you can make., • Mental Health & Wellbeing Support – Access dedicated wellbeing resources, tools, and support as part of our employee wellness programme., • Employee Recognition Programme – Be rewarded and celebrated for your contribution through our structured recognition initiatives., • Career Growth & Development – Unlock your potential with ongoing training, professional development, and clear opportunities for progression. A Little More About Marlowe Fire & Security We proudly operate across the nation, serving a wide range of industries in both commercial and domestic settings. Our goal is to provide fire and security solutions tailored to the specific needs of our customers. Each of our solutions is crafted to meet the unique compliance standards of the industries we serve, helping them ensure site security and protect their teams. We also enjoy the advantage of being part of a larger group within the Fire Protection, Security & Building Management Systems sector. This collaboration allows us to share best practices, access development academies, and leverage Human Resource expertise, all contributing to continuous improvement in this vital service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Marlowe Fire & Security, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Job Title: Field Service Engineer Industry: Machinery Manufacturing (CNC Machinery) Salary: Up to £45,000 base salary, Overtime and company bonus also available Package: Overtime, Company bonus, Car, Expenses, Progression within a market leader Location: Within 1hr of Telford – nationwide travel Company Overview: This business is a global leader in the manufacturing, commission, service, and maintenance of CNC Machines, although mainly specialising in 5 axis. They serve industries such as Aerospace, Automotive, Woodworking, Sheet Metal, and Composites. This is an excellent opportunity for an experienced CNC Service Engineer to work and progress for a true market leader. Role & Responsibilities: • Provide field-based service support for CNC machining centres, primarily working independently with occasional team collaboration., • Adapt to a varied and dynamic workload in a permanent, stable role, • Routine maintenance and servicing of CNC machines, predominantly 5-Axis, • Mechanical and electrical repairs, • Root cause analysis, fault finding, and troubleshooting About You/Required Experience • Proven field service experience in 5-axis CNC milling and routing machines, • An understanding of 5-axis programming for milling, routing, drilling, and trimming applications, • Knowledge of Step 7 PLC Setting, • Some experience of CAD/CAM programming would be a plus, • Please note, this is not a Programmer or Operator role, this is for a Field Service Engineer to install, maintain, and service the machines

Fire & Security Project Commissioning Engineer - Scotland and UK Wide based Why Marlowe Fire & Security? As one of the fastest-growing companies in the industry, we pride ourselves on our ability to deliver excellence—from the initial design to long-term maintenance. Our employees are our greatest asset, and we empower them with the tools they need to succeed. With Marlowe Fire & Security, you will enjoy a vibrant company culture, career progression opportunities, and a comprehensive benefits package including a competitive salary, vehicle allowance, and more! Basic Salary – up to £38,000 per annum Overtime, Travel Time circa £ 10,000 per annum Pension, Life Assurance & much more. – Please see our generous remuneration packages below Marlowe Fire & Security’s Project Commissioning Engineer’s Technically engineer, install commission small and large projects across the Marlowe portfolio whilst controlling and planning the projects and commissioning works. Maintain close collaboration with key clients to ensure project milestones and deadlines are achieved, while upholding company standards for profitability, health and safety, and quality assurance. • Commission fire detection and alarm systems in full compliance with relevant industry standards and regulations., • Conduct comprehensive site surveys, installation quality checks, and performance testing to ensure system integrity and functionality., • Provide expert technical support and guidance to field engineers and project teams throughout all phases of delivery., • Ensure full compliance with health and safety legislation and site-specific requirements across all project activities., • Maintain detailed and accurate documentation of commissioning processes, producing clear reports for internal and client use., • Support the delivery of end-user and operational staff training on installed systems, ensuring effective handover and understanding., • Plan, coordinate, and manage labour and materials to meet project deadlines, budgets, and quality expectations., • Offer technical input and oversight on projects, ensuring adherence to specifications and client requirements., • Attend site and client meetings as necessary to support project progress, coordination, and issue resolution., • Provide line management and oversight of assigned engineers and subcontractors, including timesheet and leave management., • Monitor and manage project profitability, regularly reporting progress and financial performance to the Project Manager., • Oversee health and safety compliance across all sites, conducting regular audits and ensuring risk control measures are in place., • Perform hands-on installation and commissioning tasks for systems and minor works as needed., • Uphold Marlowe’s standards for quality, health, safety, and environmental (HSE) compliance across all areas of responsibility. Who We’re Looking For Marlowe Fire & Security consider our people our greatest asset. All we ask is that every Team Member take pride in what they do and demonstrate commitment to delivering the highest level of service to both external and internal customers. Therefore, in addition to having all the usual attributes of a great Marlowe Fire & Security employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • A minimum of 3 years’ proven experience in the commissioning of security systems., • In-depth technical knowledge of leading industry systems including Galaxy, Gent, Notifier, and Kentec., • NVQ Level 3 in Electrical or Electronic Engineering (or equivalent qualification) is preferred., • Experience in delivering engineering projects across both single and multi-site locations., • Strong technical expertise, complemented by effective interpersonal and communication skills., • Solid understanding of major systems and large-scale project environments, with a focus on quality and compliance. Our Fire Systems Fire: Gent, Notifier, Kentec, Ziton, Advanced, Morley, C-Tec, Protec Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Basic Salary – Earn up to £38,000 per annum, with real potential to increase your take-home pay, • Generous Overtime & Travel Time – Boost your earnings by around £10,000 annually, • Generous Pension Scheme – With Royal London, helping you plan for a secure future, • Life Assurance – Peace of mind with coverage at 4x your annual salary, • Paid Annual Leave – Including bank holidays, with extra days for long service (up to 25 days), • Referral Bonus Scheme – Earn up to £1,000 per successful referral, with no limit on how many you can make, • Well-being Support – Access to mental health and well-being resources whenever you need them, • Recognition & Rewards – Be part of a culture that values and celebrates your contributions, • Career Growth – Ongoing training, development, and genuine opportunities for career progression A Little More About Marlowe Fire & Security We operate nationally, across all industries in both commercial and domestic sectors, delivering a fire and security solution that responds to our customers particular needs. Our solutions are developed according to the industries we serve, addressing their unique compliance requirements, supporting them in maintaining their sites security and protecting their people. We have the luxury and benefit of being part of a wider group of businesses within the Fire Protection, Security & Building Management Systems industry, allowing us to share best-practice, learning & development academies, Human Resource specialists and knowledge for constant improvement across the critical service industry. Big enough to provide but small enough to care. Our Business Include: • Marlowe Fire & Security marlowefireandsecurity.com, • Alarm Communications acl.uk.com, • Clymac clymac.co.uk, • FAFS Fire & Security fafsfireandsecurity.com, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com, • Morgan Fire Protection morganfire.co.uk, • Victory Fire morganfire.co.uk, • Marlowe Smoke Control marlowe-aov.co.uk, • Hadrian Technology marlowefireandsecurity.com Equal Opportunities We strive to create a diverse, inclusive environment to encourage all our employees to be themselves. We celebrate what makes us unique and believe that adopting a culture of inclusion helps us to best serve our customers. We are committed to supporting equal opportunities, please inform us if you require any reasonable adjustments to enable you to participate in the recruitment process. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

World Class Defence Organisation based in Bolton (this role will be a split between Working From Home and Onsite) is currently looking to recruit a Quality Engineer subcontractor on an initial 6 month contract. Hourly Rate: £30 - £40 per hour (Umbrella). Hours worked over 37 hours per week are paid at a time and a quarter Overtime rate. Contract Duration: 6+ Months (very much long-term and ongoing thereafter). Quality Engineer Job Description: The department are seeking an experienced and highly motivated Quality professional to join the Quality Assurance Team in Bolton, providing support to the Manufacturing Business Units. The successful candidate will be responsible for: • To provide problem-solving expertise to overcome operational challenges, • Lead and support Kaizen events and workshops, driving rapid improvement and engaging cross-functional teams, • Assess internal and external trends to see opportunities for operational improvement, • To engage with cross functional teams, fostering a culture of continuous improvement and promoting data driven decision making, • Collate, validate and analyse complex data sets to identify trends and priorities, • Mentor, coach and build team capability to achieve sustainable process improvements Skills and Experience required: • To demonstrate relevant work experience ideally backed up with qualifications, • Ideally Black Belt or equivalent with experience, • Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements, • Some electrical / electrical test experience would be an advantage, • Ability and confidence to report to all levels of the business, • Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives, • Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks

JG251 – Forklift EngineerLocation: PeterboroughSalary: £30,000 - £37,500 + Overtime + BenefitsOverview:First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients.The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction.Our client strongly encourages applications from ex-military personnel however, all candidates will be considered.Duties and Responsibilities: • Servicing and repair of forklift trucks and other lifting equipment., • Carrying out routine maintenance., • Checking oil and fuel levels., • Checking all related hoses and connections., • Steering and brake checks., • Basic electrical checks – brake lights etc., • Liaising with customers regarding their individual requirements., • Submit accurate parts requisition information to Head Office., • Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: • A good mechanical engineering background is essential., • Customer focused., • Ability to work as part of a team or on an individual basis where required., • Ex...

Field Service Engineer - Compactors & Balers East of England - Ideally based in Peterborough, Corby, Grantham, Spalding or surrounding areas £38,000 - £39,000 + Overtime (OTE £45,000) + Company Vehicle + Benefits A well-established and growing environmental services business is looking to add an experienced service engineer to cover their regional East of England patch (no national travel & constant stayaways). This role is primarily focused along the A1 corridor. You'll be joining a team of 20+ Service Engineers, supporting a wide range of customers across multiple industries. This is an excellent opportunity for an engineer who has experience working on compactors and balers, or similiar Electrical/Mechanical/Hydraulic equipment. You'll be exposed to a variety of machine types, manufacturers, and customer environments, making this a varied and rewarding field-based position. The Role Service, maintenance and repair of compactors and balers Fault finding and breakdown response across customer sites Planned preventative maintenance and inspections Working on a wide range of equipment and machine types Covering a regional patch across the East of England The Candidate Previous experience working on compactors and/or balers is desirable Strong electrical and mechanical fault-finding skills Ability to work independently in a field-based role Full UK driving licence Customer-focused approach ...

Electrical Maintenance Engineer (Nights) £46,000 - £47,000 + Night Shift Allowance + Overtime OTE 60k + Healthcare + 23 Days Holiday Peterborough Are you an Electrical Maintenance Engineer from a manufacturing background seeking a new challenge with a market-leading company, receiving specialist PLC training with state-of-the-art machinery? In this nights-based role you will be working on a wide range of brand new and refurbished manufacturing machinery, both mechanically and electrically. This will include 3-phase motors, drives, gearboxes, pneumatics, and PLCs with training given if needed. Founded over 25 years ago, this manufacturer has risen to the top in their niche market and pride themselves on being the UK's number one in their field. With multiple sites across the UK, they have recently moved to this large new production facility and invested heavily into the machinery. This role would suit a Maintenance Engineer who is looking to work nights for a large, reputable company who will further their skill set with ongoing training on a range of equipment. The Role: Planned and reactive maintenance on manufacturing machinery Working on 3-phase motors, drives, hydraulics, gearboxes, and PLCs Training given through shadowing and courses to fill in skill gaps Sunday to Thursday, 10pm - 6am Overtime paid at 1.5x The Person: Maintenance Engineer Manufacturing background Electrical experience Refer...

SENIOR VEHICLE TECHNICIAN Basic Salary: £38,000 Depending on Experience OTE: £42,000+ Location: Peterborough Hours: Monday - Friday 8:00am - 5:00pm | 1 in 4 Saturday Mornings Paid at 1.Overtime Rate Our client is looking for an experienced Senior Vehicle Technician to join their

Vehicle Prepper (Back shift) PERMANENT Job Up to £18.70 Per Hour (temp equivalent) only 40 hours a week Location: Peterborough Salary: Up to £39,000 per annum + Overtime Hours: Monday to Thursday, 3:00 pm - 1:00 am, with an early finish on Fridays, as only 3 pm-7 pm The Opportunity Our client is a well-established and highly respected automotive preparation centre based in Peterborough, with over 30 years of industry success. They are known for delivering exceptional vehicle standards, ensuring every car is presented in excellent condition both cosmetically and mechanically. Due to continued growth, they are now looking to recruit an experienced Vehicle Prepper to join their team on the late shift. Key Responsibilities Preparing vehicles to a high standard prior to delivery Ensuring all work meets quality and manufacturer standards Working on a variety of vehicles within a busy preparation centre Maintaining a clean and organised working environment Working both independently and as part of a team to meet deadlines Requirements Previous experience in a vehicle preparation or bodyshop role Strong attention to detail and pride in delivering quality work Ability to work independently and within a team Good time management and organisational skills Consistent and reliable work ethic What's on Offer Salary up to £39,000 per annum Monday to Friday, and only 40 hours a week Ove...

Generous, competitive package; as a Maintenance Engineer, Shift Engineer, MON to FRI role, you will be joining a leading specialist that transforms materials into high-quality products for the construction and manufacturing sectors, based near Peterborough. Excellent training, ongoing development and clear career advancement opportunities are provided. Location: Peterborough What's in it for you as a Maintenance Engineer? • A Salary of £56,000 salary Overtime available at 1.5x and 2x • Monday to Friday - 3 Shift (6-2/2-10/10-6), • 31 days' holiday (pro rata), increasing by one day each year up to 36 days, including bank holidays., • KPI Bonus, • Company pension, • Excellent training, ongoing development and clear career advancement opportunities Peterborough location is easily accessible from Stamford, Huntingdon, March, Spalding, Bourne, Wisbech, Grantham, Oundle, Ely, Northampton, Bedford, Corby, Kettering Main Responsibilities of the Maintenance Engineer? • Providing full plant-wide maintenance support, repairs and technical assistance to ensure production output and efficiency targets are consistently achieved, • Carrying out maintenance on a wide range of factory manufacturing machinery and automated equipment, • Supporting machine set-ups and changeovers, ensuring compliance with QA standards and maximising efficiency during production transiti...

Days Cambridgeshire £45,000 + Overtime + Benefits Looking to get off nights? This could be the move you've been waiting for.A growing manufacturer is looking for a Maintenance Engineer to join their close-knit team on a 4 on 4 off days shift.With major investment, new automation projec

IT Support (MSP / Luxury Brands) Loughton - Hybrid £38,000 - £42,000 + Overtime + Company Bonus (1 months pay)+ Progression + Company Benefits Are you an IT Support Engineer from an MSP background looking to join a fast-growing, award-winning support company that works with luxury brands? Do you want to join a tight-knit company which offers comprehensive software training above the fundamentals, a good team culture and has tangible goals and incentives? On offer is the chance to join a business that has gone from strength to strength in the last decade and are now working with blue chip companies and some of the most recognisable names in fashion and offers un-paralleled progression In this role you will be going through support tickets, ensuring SLA's are met, offer support & implementation services to clients, resolve helpdesk issues and provide support on Microsoft Operating Systems. The range of brands you will be liaising and building rapport with offers a fresh approach to every day. The ideal candidate has experience in MSP environment and an technical support background. The job: • Trouble Shooting, • Managing multiple IT Support Tickets, • Ensuring SLAs are met, • Learn from industry experts to upskill yourself The person • MSP Background, • Good communicator, • Commutable to Loughton Reference: BBBH19847 Keywords: IT, Excel, Microsoft, ConnectWise, Azure, Support tickets, Customer service, High profile clients, Retail & IT, Hardware, Risk mitigation, If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Mobile Plant Fitter Peterborough £45,000 basic Van with personal use, 32 days holiday, overtime paid at 1.5x, sick pay and more Overview We are seeking a skilled and dedicated Mobile Plant Fitter to join our team. This is an exciting opportunity to work on a wide range of plant machinery, including excavators up to 50 tons, dumpers, loading shovels, dozers, ADTs, and more. With exposure to a variety of manufacturers such as CAT, Volvo, Komatsu, and others, this role offers a dynamic and rewarding career for the right candidate. Responsibilities Conduct maintenance, servicing, and repairs on a wide range of plant machinery. Diagnose and troubleshoot mechanical and electrical faults efficiently. Ensure all machinery is maintained to the highest standards to minimize downtime. Work on-site and off-site, providing mobile support to clients as required. Maintain accurate records of work completed and parts used. Adhere to health and safety regulations at all times. Provide excellent customer service and represent the company professionally. Qualifications Proven experience as a Plant Fitter or similar role. Strong knowledge of plant machinery, including excavators, dumpers, dozers, and ADTs. Familiarity with manufacturers such as CAT, Volvo, Komatsu, and others. Ability to diagnose and repair mechanical and electrical faults. Full UK driving license. Strong problem-solving skills and attention to detail. Excellent comm...

Job Title: Senior HGV Mechanic Location: Newark, Nottingham Salary: £24.00 per hour (Days/Afters) or £27.00 per hour (Nights) Shift Patterns: Days/Afters: Rotating shifts (5:00am 2:00pm / 2:00pm 11:00pm) 45 hours per week Nights: Monday to Friday, 10:00pm 6:00am Average 40 hours per week HGV Mechanic Benefits: Competitive hourly rate of £24.00 or £27.00 per hour depending on shift pattern Overtime paid at time and a quarter after contracted weekly hours Retention bonus after qualifying period £10.00 shift allowance for each afternoon shift worked 100% MOT pass rate bonus scheme 28 days holiday entitlement (pro-rata) Paid breaks Company pension scheme Company sick pay scheme Free on-site parking Key Senior HGV Mechanic Responsibilities: Carry out servicing, maintenance and repairs on HGV trucks and trailers Diagnose and repair mechanical, electrical and hydraulic faults Complete routine inspections and preventative maintenance activities Prepare vehicles and trailers for MOT testing and ensure DVSA compliance Conduct safety inspections and identify defects promptly Accurately complet...

JG251 – Forklift Engineer Location: Peterborough Salary: £30,000 - £37,500 + Overtime + Benefits Overview: First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients. The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction. Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: Servicing and repair of forklift trucks and other lifting equipment. Carrying out routine maintenance. Checking oil and fuel levels. Checking all related hoses and connections. Steering and brake checks. Basic electrical checks – brake lights etc. Liaising with customers regarding their individual requirements. Submit accurate parts requisition information to Head Office. Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: A good mechanical engineering background is essential. Customer focused. Ability to work as part of a team or on an individual basis where required. Excellent time management skills Excellent communication skills – both verbal and written. Experience with forklift trucks, military, agricultural or p...

Fire and Security Engineer – Peterborough – £36,000- £43,000 Per Annum Fire and Security Engineer Package Overview: £36,000 - £43,000 Basic Salary + Overtime (Negotiable depending on experience) Full-Time, Permanent Monday to Friday Hours Area