Fabrication jobs in CoventryCreate job alerts

Sheet Metal Worker (Manufacturing / Ventilation) \n Coventry | Full-Time | Permanent \n A well-established and growing engineering manufacturer within the ventilation sector is seeking an experienced Sheet Metal Worker to join their workshop team. \n This is a fantastic opportunity to join a specialist business producing bespoke equipment for both new build and refurbishment projects. \n The Role \n Working within a small, skilled workshop team, you will be responsible for the manufacture of bespoke ventilation and air handling components. \n Key responsibilities include: \n\n • Manufacturing bespoke ductwork, silencers, plenums, and air handling components\n, • Working with galvanised sheet metal (typically 0.9mm – 3.0mm)\n, • Operating machinery including hydraulic presses and cutting equipment\n, • Interpreting technical drawings and fabrication sketches\n, • Ensuring all work is completed to a high standard\n, • Maintaining strong health and safety practices at all times\n, • Liaising with the workshop supervisor and wider team\n\n What We’re Looking For \n\n • Previous experience as a Sheet Metal Worker or Fabricator within a relevant industry\n, • Experience working with galvanised sheet metal\n, • Ability to read and interpret technical drawings\n, • Good practical skills and attention to detail\n, • Physically capable of handling materials and tools\n, • Strong work ethic with the ability to work effectively within a team\n, • Basic maths skills\n\n What’s on Offer \n\n • Hourly rate: £14.50 per hour (negotiable depending on experience)\n, • Full-time, permanent position\n, • Long-term opportunity within a stable and growing business\n\n Working Hours \n\n • Monday to Thursday: 8:00am – 5:30pm\n, • Friday: 8:00am – 3:30pm\n\n Apply Now \n If you are an experienced sheet metal worker or fabricator looking for your next opportunity within a growing engineering business, we would like to hear from you.

Buyer – Fabrication & Timber/Joinery\n Location: Middlemarch Business Park, Coventry | Salary: up to £40,000 | Permanent, Full-TimeHybrid: 3 days on-site / 2 days WFH \n A well-established manufacturing business based on the outskirts of Coventry is looking to recruit an experienced Buyer to join their procurement team on a permanent basis. \n The company designs and manufactures bespoke fabricated products and joinery solutions, supplied to clients across the UK. With a supply chain that extends across the Far East as well as domestic and European suppliers, this is a hands-on operational buying role in a business that takes procurement seriously. \n The Buyer Role \n Reporting to the Senior Buyer, you'll take ownership of purchasing activity across fabrication and timber/joinery categories, working closely with production, engineering, and logistics to keep supply flowing and costs controlled. \n Day to day you'll be: \n\n • Placing and managing purchase orders for raw materials and components, with a focus on fabricated metal and timber/joinery categories\n, • Running MRP/ERP action messages, managing open order books and monitoring supplier lead times\n, • Coordinating with Far East and European suppliers, managing delivery schedules and resolving shortages\n, • Negotiating with suppliers on price, lead time, and terms\n, • Supporting logistics and import processes including Incoterms management\n, • Working from technical drawings and specifications to ensure accurate procurement\n, • Maintaining supplier performance data and reporting on key metrics\n, • Contributing to cost saving initiatives and identifying continuous improvement opportunities\n\n What We're Looking For in a Buyer \n\n • A background in operational buying within a manufacturing or engineering environment\n, • Hands-on experience with MRP/ERP systems (SAP experience is a genuine advantage)\n, • Comfortable working from technical drawings and specs\n, • Some exposure to Far East sourcing is strongly preferred; a clear appetite to develop in this area will also be considered\n, • Strong Excel skills (pivot tables, vlookups)\n, • Commercially sharp, well-organised, and comfortable managing a high volume of open orders\n, • Excellent communicator, able to work cross-functionally and build good supplier relationships\n\n What's On Offer \n\n • Salary up to £40,000 depending on experience\n, • Bonus scheme (3–5%)\n, • Hybrid working (3 days Coventry office / 2 days WFH)\n, • Genuine development opportunity within a growing procurement function\n\n This role is commutable from Coventry, Rugby, Leamington Spa, Birmingham, Nuneaton, and surrounding areas. INDH

Sheet Metal Worker (Manufacturing / Ventilation) Coventry | Full-Time | Permanent A well-established and growing engineering manufacturer within the ventilation sector is seeking an experienced Sheet Metal Worker to join their workshop team. This is a fantastic opportunity to join a specialist business producing bespoke equipment for both new build and refurbishment projects. The Role Working within a small, skilled workshop team, you will be responsible for the manufacture of bespoke ventilation and air handling components. Key responsibilities include: Manufacturing bespoke ductwork, silencers, plenums, and air handling components Working with galvanised sheet metal (typically 0.9mm - 3.0mm) Operating machinery including hydraulic presses and cutting equipment Interpreting technical drawings and fabrication sketches Ensuring all work is completed to a high standard Maintaining strong health and safety practices at all times Liaising with the workshop supervisor and wider teamWhat We're Looking For Previous experience as a Sheet Metal Worker or Fabricator within a relevant industry Experience working with galvanised sheet metal Ability to read and interpret technical drawings Good practical skills and attention to detail Physically capable of handling materials and tools Strong work ethic with the ability to work effectively within a team Basic maths skillsWhat's on Offer Hourly rate: £14.50 per hour (negotiable depending on experience) Full-time, permanent position Long-term opportunity within a stable and growing businessWorking Hours Monday to Thursday: 8:00am - 5:30pm Friday: 8:00am - 3:30pmApply Now If you are an experienced sheet metal worker or fabricator looking for your next opportunity within a growing engineering business, we would like to hear from you

The Job People are looking for a Production Supervisor to join a busy manufacturing site in Coventry for long term work. We require candidates with production supervisor experience with a keen eye for detail and willingness to learn new skills. Must be able to read & understand English. Must be able to sue a tape measure accurately. We are looking for hardworking, enthusiastic colleagues who are willing to work long term with the opportunity to gain a full-time contract. Self-Motivated, Friendly. Able to effectively communicate with managers and colleagues. Have a 'can-do' attitude and willing to learn new skills. This is a full time role - with the view to go permanent after a qualifying period. Shift Hours as a Production Supervisor in Coventry: Monday to Friday 8 hours per day 16.00 - 00.00 Some shifts may start earlier or finish later due to the demands of the business. Weekend support required in busy periods Long term work Opportunity to go permanent after a qualifying period.Pay Rates for Production Supervisor: £16.92 per hour - flat rate with shift allowance added - £22.50 per hour Must be prepared to train for a short period on AM shift - Monday to Friday 7am-3pm Overtime paid after 37.5 hours Pay increases reviewed Duties as a Production Supervisor in Coventry: Lead fabrication operators, which includes dealing with ER issues Ensure the safety of yourself and the team, all are working to agreed safety and quality standards Oversee production operations ensuring people and materials are in the right place at the right time Ensure quality checks take place when needed, actions arising from these are dealt with Working within the team troubleshoot issues with machinery / products Drive continuous improvement on the workshop floor Ensure production targets are met and highlight/action when falling behind Manage consumable stocks, ensure items are ordered when reorder point is reached Oversee the warehouse operation, balance labour resource where needed Leadership & Communication, ability to manage teams, handle conflict, and communicate technical information clearly. Technical knowledge, understanding of manufacturing machinery and processes. Analytical thinking, troubleshooting production issues and analyzing performance data. Willingness to learn/use a computer Willingness to work as part of a team Should not suffer from claustrophobia or fear of heights Should be able to lift 20kg consistently during the working day Accurately use various tools and be able to use a measuring tape and spirit level. Musty be able to count and work out measurements in MM, CM and Inches. Full training provided. Moving pallets and stock to various locations Support with loading and unloading deliveries. General duties as and when required.Benefits of working for The Job People: Long term work - Opportunity to gain a full-time contract. Weekly Pay Holiday Pay Canteen on site - free hot drinks Access to online payslip portal Pension Scheme Free on-site car parking PPE Work wear provided. Dedicated account team Training programme Full time hours available Fixed Shifts Consistent shifts Great work / life balancePlease click apply to be considered for our role within the manufacturing and production industry in CV2. Please note - due to increased applications we receive, we cannot always respond to every applicant. The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

Maintenance Engineer Coventry | £33,300 per Annum | Overtime: Paid at 1.3x (£20.80 per hour) The Role An opportunity has arisen for a mid-level Hands-On Maintenance Engineer to join a fast-paced industrial coatings business operating from a high-volume production facility in Coventry. The site delivers liquid paint and powder coating services to the automotive, industrial and agricultural sectors, where uptime, speed of response and equipment reliability are critical to meeting strict production schedules and customer deadlines. This is a fully floor-based, reactive and preventative maintenance role suited to a mechanically biased engineer with strong practical capability and a willingness to work in a demanding production environment. The role requires rapid physical intervention to diagnose faults, repair equipment and restore production as quickly and safely as possible. Key Responsibilities Carry out hands-on maintenance and repair of production machinery, plant equipment and associated systems within a live manufacturing environment. Rebuild and service fluid handling equipment including pumps, reciprocating spray guns, electrostatic bells and injectors. Maintain and overhaul industrial curing ovens, including burners, blowers, conveyor tracks and associated mechanical components. Clean, replace and maintain booth filtration systems, including dry filters, water-wash sludge systems and air handling units. Respond to breakdowns on the production floor, providing rapid fault diagnosis and repair to minimise downtime and protect output targets. Carry out basic electrical fault finding including tracing circuits, testing PLC inputs/outputs and resolving wiring and control issues at machine level. Undertake pneumatic system fault finding and repair, including air lines, actuators and control valves. Deliver planned preventative maintenance activities including lubrication routines, inspections and mechanical servicing across daily, weekly and monthly schedules. Support emergency maintenance interventions during breakdowns and production-critical failures. Use hand tools, power tools, multimeters and fluid handling equipment confidently and safely. Work within confined or restricted spaces including spray booths and elevated work areas where required. Maintain high standards of safety, housekeeping and compliance with site procedures and PPE requirements. Candidate Requirements Pumps, motors, bearings and general mechanical maintenance. Industrial burners, ovens and thermal systems. Basic electrical fault finding, including wiring and control diagnostics. Pneumatic systems and compressed air equipment. MIG welding and fabrication repair work. Fast-paced breakdown response and preventative maintenance routines. Working Pattern & Pay Location: Coventry (Exhall) Shift: Fixed evening shift Hours: 2:00pm – 12:00am (Monday to Friday) Hourly Rate: £16.00 per hour Overtime: Paid at 1.3x (£20.80 per hour) for hours worked over 40 per week Occasional weekend working required for maintenance windows and emergency breakdown support

About the Opportunity An exciting opportunity has arisen for an experienced CAD / BIM Technician to join a growing team delivering complex mechanical and low-carbon energy projects across the UK. Working on a range of innovative schemes including energy centres, district heating networks, heat pump installations, packaged plantrooms and prefabricated pipework systems, you will play a key role in developing coordinated BIM models, construction drawings and fabrication information from concept through to installation. This role would suit someone with a strong background in mechanical building services, BIM modelling or pipework fabrication design who is looking to work on technically challenging and sustainable infrastructure projects. Key Responsibilities BIM & CAD Modelling Produce detailed 2D and 3D models using Autodesk Revit and AutoCAD. Develop coordinated mechanical plantroom, energy centre and pipework models. Create fabrication-ready layouts for prefabricated pipework, skids and modular plant systems. Produce General Arrangement (GA), installation, section and elevation drawings. Generate spool drawings, isometric drawings and fabrication information. Maintain drawing and model quality in accordance with project BIM requirements. Design Coordination Coordinate designs with mechanical, electrical, structural and civil disciplines. Participate in BIM reviews and clash detection workshops. Ensure designs are practical, buildable and suitable for manufacture and installation. Incorporate survey and point cloud information where required. Support project teams during technical design reviews. Project Delivery Produce drawing packages through design, construction and as-built stages. Manage revisions and updates following design changes and site feedback. Assist with BIM documentation and project deliverables. Support the preparation of O&M and as-installed documentation. Offsite Manufacturing Support Develop detailed fabrication models for carbon steel and stainless-steel pipework systems. Produce fully dimensioned spool and skid drawings. Liaise with workshop teams to resolve fabrication queries. Ensure designs reflect manufacturing, transportation and installation requirements. Requirements Essential HNC/HND in Mechanical Engineering, Building Services Engineering, BIM, CAD or a related discipline. Minimum 2 years' experience within a CAD or BIM role. Proficiency in Autodesk Revit and AutoCAD. Experience producing detailed mechanical layouts and construction drawings. Strong understanding of pipework systems and mechanical plant installations. Knowledge of BIM processes and coordinated design environments. Ability to interpret engineering drawings, specifications and P&IDs. Desirable Experience on energy centres, district heating schemes or heat pump projects. Previous fabrication drawing or spool drawing experience. Understanding of ISO 19650 BIM standards. Experience using Navisworks, Plant 3D or point cloud modelling software. Exposure to modular plantrooms, skids and offsite manufacturing processes. What's on Offer? Opportunity to work on innovative low-carbon energy and infrastructure projects. Involvement in projects from design through to fabrication and installation. Career development within a growing engineering and project delivery environment. Competitive salary and benefits package. Apply If you have experience with Revit, AutoCAD, mechanical building services and BIM coordination, we'd love to hear from you. Apply today with your latest CV for a confidential discussion. RG Setsquare is acting as an Employment Business in relation to this vacancy

Commercial Vehicle Technician, Nuneaton, Days, £38,000 - £44,000- Commercial Vehicle Technician jobs, HGV Mechanic jobs, HGV Technician jobs, HGV Fitter jobs, Heavy Vehicle Mechanic jobs, Fleet Engineer jobs.- Days role Monday Friday with the odd Saturday morning (spread across the team).- Competitive base salary dependent on experience + Overtime availability + 25 days holiday + pension + Training & Development Opportunities(e.g IRTEC)This Commercial Vehicle Technician role will suit:- A mechanically biased Commercial Vehicle Technician jobs, HGV Mechanic or HGV Technician.- Strong background in servicing, diagnostics and repairs on HGVs or heavy vehicles.- Level 3 qualified (NVQ, City & Guilds or IMI)- IRTEC accreditation (desirable but not essential).- Someone local to Nuneaton / CoventryThis Commercial Vehicle Technician role will involve:- Servicing, inspections, MOT prep and reactive repairs- Fault finding and diagnostics on HGVs and trailers- Welding and fabrication work where needed- Completing job cards and maintenance records- Supporting breakdown and roadside repairs when requiredThis HGV Mechanic job is commutable from Nuneaton, Coventry, Bedworth, Hinckley, Leicester and surrounding areas.To apply, send your CV to Sam Hilton. If you are not contacted within ten days, unfortunately your application has not been successTPBN1_UKTJ

MCR are currently recruiting for experienced Stainless steel TIG welders to start August for our client in Coventry. Please note: This position involves working in the workshop and also working on various sites around the UK Must be: Highly competent in TIG welding 304 and 316 stainless steel. Must have previously held recognised welding codes (current coding preferred but not essential, providing you have been coded in the past). Able to read and interpret engineering and fabrication drawings. Competent in TIG and MIG Welding, light fabrication and preparing pipework/fabricated components from drawings. Must have their own welding PPE. Full UK driving licence and own transport, with the ability to travel to various sites. Weld test will be required. Experience working on industrial mechanical installations, plant rooms, process pipework, process installations or similar engineering environments. Ideally, you will have: CSCS card - any standard Weld codes IPAF licence FLT licence If you are interested in the above position, please click on the link to register and attach a full up-to-date CV or call and speak to Mike. We DO NOT offer sponsorships so please only apply if you are a UK resident and have the correct Right to Work documentation

BIM Technician We're looking for an BIM technician that supports the digital delivery of mechanical, electrical, and plumbing (MEP) systems produced within an off‑site fabrication environment. Main Duties Develop, update, and maintain detailed 3D MEP models specifically designed for off‑site fabrication and modular assembly. Produce fabrication‑ready spool drawings, module layouts, bill‑of‑materials, and installation documentation for production and site teams. Coordinate with mechanical, electrical, and plumbing engineers to ensure accurate routing, supports, penetrations, and connection details. Support clash detection and multi‑discipline model coordination to ensure seamless integration during on‑site installation. Implement and maintain BIM Execution Plans (BEPs), fabrication standards, and quality control procedures. Work closely with production supervisors to resolve design‑to‑fabrication issues and incorporate feedback into future models. Maintain structured digital file management and version control within the Common Data Environment (CDE). Assist in developing and improving BIM templates, libraries, and standardised fabrication components. Provide technical support to fabrication and site teams regarding model interpretation, drawing queries, and digital workflows. What we are looking for Strong proficiency in Revit (MEP), Navisworks, and AutoCAD; experience with Revit Fabrication Parts or Autodesk Fabrication CADmep is beneficial but not essential. Solid understanding of MEP systems and off‑site fabrication or modular construction processes. Ability to interpret engineering schematics, fabrication standards, and installation drawings. High level of accuracy and attention to detail, particularly when producing fabrication‑ready outputs. Strong communication and teamwork skills, with the ability to collaborate across engineering, production, and site teams. Organised, proactive, and capable of managing multiple models and deadlines in a fast‑paced environment. Relevant qualification in building services engineering, digital construction, or a related field. Preferred Experience Experience in an MEP prefabrication, modular construction, or building services environment. Familiarity with ISO 19650 workflows and digital construction standards. Experience with CDE platforms such as BIM 360, Viewpoint, or Asite. Understanding of lean manufacturing principles or production‑line workflows

Stainless Steel TIG Welder Location: Coventry (with travel to various sites) Pay: £20.00 - £28.00 per hour (depending on experience) We are currently recruiting for an experienced Stainless Steel TIG Welder to join a busy and growing team. This is an excellent opportunity for a skilled welder with experience working on high-quality stainless steel fabrication and pipework projects. The Role You will be responsible for TIG welding and light fabrication of stainless steel components, working from engineering drawings to produce high-quality work to industry standards. Essential Requirements Highly competent in TIG welding 304 and 316 stainless steel. Previously held recognised welding codes (current coding is desirable but not essential if previously coded). Ability to read and interpret engineering and fabrication drawings. Experience with light fabrication and preparing pipework and fabricated components from drawings. Own welding PPE. Full UK driving licence and own transport, with the flexibility to travel to various client sites. Successful completion of a weld test. Desirable Experience Based in or around Coventry or willing to work from the Coventry site. Previous experience working on industrial mechanical, process, or pipework installations. What's on Offer Competitive hourly rate of £20.00 - £28.00 per hour, depending on experience. Ongoing work with a well-established company. Opportunity to work on a variety of industrial projects. * Immediate start available for the right candidate. If you're a skilled Stainless Steel TIG Welder looking for your next opportunity, we'd love to hear from you. Apply today with your CV or get in touch for more information

The Job People are looking for Fabrication Production Operatives for a rotation shift to join a busy manufacturing site in Coventry for long term work. We require candidates with some production experience with a keen eye for detail and willingness to learn new skills. Must be able to read & understand English. Must be able to work AM & PM Rotation shift Previous CNC / PRESS MACHINE / METAL GRINDING EXPERIENCE advantageous We are looking for hardworking, enthusiastic colleagues who are willing to work long term with the opportunity to gain a full-time contract. Able to effectively communicate with managers and colleagues Have a 'can-do' attitude and willing to learn new skills. This is a full time role - we do not have any part time roles. Shift Hours as a Production Operative in Coventry: Fixed shifts All will be working am/pm rotation - £12.72 per hour with shift allowance of £115.87 per week. £15.77 per hour. Monday to Thursday 6am - 2pm, Friday 6am - 12pm Monday to Thursday 2pm - 10pm, Friday 12pm - 6pm one week about rotation. Monday to Friday Weekend support required in busy periods / overtime Long term work Opportunity to go permanent after a qualifying period.Pay Rates for Production Operative: £12.72 per hour, plus shift allowance, takes you to £15.77 per hour Overtime available at enhanced rate Weekly pay Duties as a Production Operative in Coventry: Support the factory in the production of car parts Ensuring accuracy make sure no mistakes are made. Accurately use various tools and machinery Ability to use a CNC machine, PRESS machine, Metal Grinding parts Full training provided. Moving pallets and stock to various locations General duties as and when required.Benefits of working for The Job People as a Production Operative: Long term work - Opportunity to gain a full-time contract. Weekly Pay Holiday Pay Canteen on site Access to online payslip portal Pension Scheme Free on-site car parking PPE Work wear provided. Dedicated account team Full time hours available Fixed Shifts Consistent shifts Great work / life balancePlease click apply to be considered for our Production Operative role within the manufacturing and production industry in CV6. Please note due to high advert responses, we cannot always call every application, please ensure your CV is up to date with all details relevant to the job role The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

Architectural Metalwork Fabricator/Welder Requirements of the Fabricator / Welder: Extensive and current experience of staircase and balustrades welding & fabrication in Architectural Metalwork and MIG Must be able to TIG weld to a high standard · Accurately work from and interpret detailed drawings as and when required · Clamping, holding, tac-welding, heat-bending, bolting or grinding parts as necessary to satisfy technical requirements · Ensure parts are defect free from assembly process and previous operations Prioritize, generate and promote, safe working practices and adherence to Health and Safety standards at all times. To operate role related equipment within designated areas always using health & safety rules, whilst maintaining targeted output Consistently maintain and update all relevant documentation relating to production activities in line with agreed company standards ensuring that regulatory and quality requirements are met Maintain adherence to PPE standards Recording of quality issues and undertaking corrective action(s) Maintenance of a safe working environment, keeping areas always clear of debris and hazards and ensuring housekeeping standards are at an acceptable level, recognizing potential/actual hazards and taking corrective actions to minimize accidents. Follow company procedures relating to correct disposal of waste Not Essential but would be helpful if candidate holds a Forklift License (Counter Balance and Side Loader). Responsibility & Duties Complete all fabrication/welding tasks as assigned by the Workshop Manager accurately and efficiently, using own initiative as far as possible Notify Workshop Manager of any concerns in relation to the above You will need to be physically fit due to high levels of manual handling duties Take responsibility for the health and safety of yourself and of others who may be affected by your acts or omissions at work Must be able to work to deadlines and offer flexible working hours Key knowledge, skills & experience A valid UK Driving license A good standard of both written and spoken English Ability to work well under pressure Ability to work well as part of a team and also under your own initiative when required Well organised with excellent time management Demonstrate a desire for self-improvement and enthusiasm to learn new skills Ability to interpret and work from drawings * Ability to work on a variety of projects simultaneously Additional knowledge, experience and skills; 5 -10years experience with a proven track record working in Architectural and Metal workshop Working hours are Mon-Th- 06:30-15:30 Fri – 06:30-11:30. 39 hrs a week. Overtime at time and 3rd. Pay rate at £16/17 hr. Please call Carly at Quanta (phone number removed)

Workshop Assistant Based onsite at Coventry University Monday to Friday 9am-17.30 (1 hour lunch) £12.71 per hour To starts a.s.a.p until 31st December 2026 We are currently recruiting for 2 Workshop Assistants to support the day-to-day operation of workshop and studio spaces by assisting Technical Demonstrators and Technicians in the preparation, organisation, and maintenance of teaching environments. These roles will work under supervision to help ensure workshops are safe, clean, organised, and appropriately prepared for teaching, learning, and related activities. The role will include: Workshop & Studio Support Assist with the preparation and setup of workshop and teaching spaces for classes and activities. Prepare materials, equipment, and resources as directed by technical staff. Support the clearing, resetting, and tidying of workshop spaces following sessions. Assist with the movement of equipment, materials, and furniture as required. Maintain clean, organised, and presentable workshop environments at all times. Student Support Welcome students into workshop spaces in a professional and supportive manner. Provide basic guidance on workshop procedures, rules, and booking systems. Direct technical or specialist queries to appropriate Technical Demonstrators or Technicians. Support student inductions, demonstrations, and workshop events as required. Equipment, Resources & Digital Fabrication (3D Printing & Laser Cutting) Assist with the preparation, organisation, and storage of equipment and materials. Undertake basic cleaning of equipment under supervision. Report damaged, missing, or faulty equipment to technical staff promptly. Support the maintenance of organised storage areas and stock levels. You will have the following skills: Ability to follow instructions and work effectively as part of a team. Good organisational skills and attention to detail. Ability to carry out practical tasks in workshop or studio environments. Good communication skills when interacting with students and staff. * Understanding of the importance of health and safety in workshop settings

Job Role: Maintenance Engineer Location: Coventry Pay: £44,460 Hours: M-F 3pm-1am (15:00hrs-01:00 hrs) Contract: Full time Permanent role Benefits: 25 days holiday + bank holidays, overtime paid at 1.5 X / 2X, Weekly pay, pension, death in service, wellbeing programme, free onsite parking, excellent ongoing training, 2 x 30 minute breaks, cycle to work scheme Job Purpose of the Maintenance Engineer We are looking for a safety-focused and motivated Maintenance Engineer / Maintenance Fitter to join our maintenance team on a permanent late shift. This is an excellent opportunity for a hands-on engineer with strong mechanical maintenance experience who enjoys working in a fast-paced production environment. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM), responding to breakdowns, and ensuring the efficient operation of our MRF, SRF, and mobile plant equipment. Main duties and responsibilities of the Maintenance Engineer Carry out planned preventative maintenance (PPM) across the site. Perform routine greasing, inspection, and servicing of plant equipment. Replace bearings, shafts, rollers, and other mechanical components. Diagnose and replace hydraulic hoses and associated components. Carry out breakdown repairs and fault finding on Materials Recovery Facility (MRF) and Solid Recovered Fuel (SRF) processing equipment. Assist with maintenance and repairs on mobile plant. Reset electrical breakers and inverters and assist with basic electrical fault diagnosis. Ensure all maintenance activities are completed safely and in accordance with company procedures. Maintain accurate maintenance records and report any recurring issues. Work closely with operations teams to minimise downtime and maximise plant performance.Abilities, Skills, and Knowledge required for the Maintenance Engineer Previous experience as a Maintenance Engineer, Maintenance Fitter, or similar role. Strong mechanical maintenance and fault-finding skills. Experience working with conveyors, bearings, shafts, hydraulic systems, and production machinery. Good understanding of health and safety requirements within an industrial environment. Ability to work independently and as part of a team. Positive attitude and strong work ethic.Desirable: Experience within recycling, waste processing, MRF, SRF, quarry, manufacturing, or heavy industrial environments. Basic electrical knowledge, including breakers and inverter resets. Basic welding and fabrication skills. Mobile plant maintenance experience

Mechanical Maintenance EngineerLocation: CoventrySalary: £49,500 per annumShift Pattern: Days Only (Monday to Friday)About the CompanyWe are a well-established and growing food manufacturing business based in Coventry, supplying high-quality products to major retailers and customers across the UK. Due to continued investment and expansion, we are looking to recruit an experienced Mechanical Maintenance Engineer to join our engineering team.The RoleAs a Mechanical Maintenance Engineer, you will be responsible for ensuring the reliability, efficiency, and performance of production equipment across our manufacturing facility. Working on a permanent days shift, you will carry out planned and reactive maintenance activities while supporting continuous improvement projects throughout the site.Key ResponsibilitiesPerform planned preventative maintenance (PPM) and reactive maintenance on manufacturing and packaging machinery.Diagnose and repair mechanical faults to minimise downtime.Carry out welding and fabrication work as required to support maintenance and improvement projects.Operate workshop machinery and undertake machining tasks including the manufacture and modification of components.Produce and amend engineering drawings using CAD software.Assist with machinery installations, upgrades, and continuous improvement initiatives.Ensure all maintenance activities are completed safely and in accordance with company procedures.Maintain accurate maintenance records and documentation.Work closely with production teams to maximise plant performance and efficiency.RequirementsTo be successful in this role, you will have:Previous experience as a Mechanical Maintenance Engineer within a manufacturing environment, ideally food manufacturing.Strong welding and fabrication skills.Experience using manual machining equipment such as lathes and milling machines.Proficiency with CAD software and the ability to create and modify engineering drawings.Excellent fault-finding and problem-solving abilities.Knowledge of conveyors, pumps, gearboxes, bearings, pneumatics, and general production equipment.A recognised engineering qualification (Apprenticeship, NVQ Level 3, City & Guilds, HNC or equivalent) is desirable.A proactive approach with strong communication and teamwork skills.Salary & BenefitsCompetitive salary of £49,500 per annum .Permanent days shift role offering excellent work-life balance.Company pension scheme.Company Sick Pay - 1 month in a rolling 12-month period (following successful completion of probation).Retail Discount Scheme .Cycle to Work Scheme and Techscheme .Long Service Awards .GEM Awards - Employee Recognition Programme.Employee Assistance Programme (available to pension scheme members).4x Death in Service Benefit (available to pension scheme members).Ongoing training and development opportunities.Stable employment within a successful and growing food manufacturing business.Opportunity to contribute to continuous improvement and engineering projects.Apply NowIf you are an experienced Mechanical Maintenance Engineer with welding, fabrication, machining, and CAD experience and are looking for a rewarding days-based role in Coventry, we would love to hear from you.TPBN1_UKTJ

The Job People are looking for Fabricator Welders to join a busy manufacturing plant in Coventry. The work is long term and can lead to a permanent contract after a qualifying period. To manufacture, repair, modify and assemble metal components and structures using welding and fabrication techniques while maintaining high standards of safety, quality and productivity Details of a Fabricator Welder in Coventry: Monday to Friday 8am till 4pm Monday to Thursday 8am till 2pm Friday 38 hours per week £21.12 per hour Overtime available Must be flexi to support business needs Ongoing work Long term opportunity Must have previous experience and certification / qualification As a Fabricator Welder, you would be required to: Read and interpret engineering drawings, specifications and work instructions. Fabricate, assemble and weld components to required standards. Operate fabrication equipment including saws, drills, grinders, presses and welding equipment. Carry out MIG, TIG and Arc welding as required. Inspect completed work to ensure compliance with quality requirements. Perform basic maintenance and care of welding and fabrication equipment. Follow health, safety and environmental procedures at all times. Support continuous improvement and TPM activities. Maintain accurate records of work completed and materials used. Work collaboratively with production, maintenance and engineering teams.Role of a Fabricator Welder in Coventry: Strong welding and fabrication skills. Ability to read and understand engineering drawings. Good problem-solving and fault-finding ability. Attention to detail and quality standards. Good communication and teamwork skills. Ability to work independently and manage workload. Knowledge of MIG, TIG and Arc welding processes Understanding of fabrication techniques and metal properties. Knowledge of health and safety regulations relating to welding and fabrication. Understanding of quality inspection methods and measuring equipment. Awareness of TPM and continuous improvement principles. Knowledge of manufacturing processes and production environmentsBenefits on working with The Job People as a Fabricator Welder: Weekly Pay. Holiday Pay. Payslip portal. 28 days holiday Pension Scheme. On-site canteen facility Outdoor area Free on-site parking. Locker Room. Prayer Room. Opportunity to go permanent. Opportunity to progress and increase your take home pay. Overtime available. Smoke / Vape area. Lovely / friendly team to work within. Supportive management.If you are interested in the role of a Fabricator Welder within the Logistics Distribution and Supply Chain Industry, we would love for you to apply. We aim to respond ASAP to our applications. Please ensure your CV is up to date. Thank you. The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

Pay: £16.00-£17.00 per hour Job Description: Welder Fabricator We are seeking a skilled and experienced Welder Fabricator to join our team in Coventry. The ideal candidate will have proven experience in both architectural metalwork and structural steelwork, demonstrating a high standard of craftsmanship and attention to detail. This role offers a competitive salary and opportunities for overtime. Job Details Position: Welder Fabricator Location: Coventry Salary: £16.00 - £17.00 per hour (dependent on experience) Hours: 39 hours per week (full-time, permanent) Working Pattern: Monday - Thursday: 6:30 AM - 3:30 PM or 7:00 AM - 4:00 PM Friday: 6:30 AM - 11:00 AM or 7:00 AM - 11:30 AM (early finish Friday) Overtime (OT): During the week: x 1.3 Friday - Sunday: x 1.5 Benefits: Company pension scheme, potential for career development (specifics would need to be added by the employer, e.g., on-site parking, life insurance) Key Responsibilities Read and accurately interpret engineering drawings, blueprints, and project specifications to plan fabrication sequences. Fabricate and assemble architectural metalwork and structural steel components to precise specifications and quality standards (balustrades and staircases) Perform high-quality welding using various techniques, primarily MIG and potentially TIG or Stick welding, depending on material requirements. Use a range of hand tools, power tools, and fabrication equipment such as grinders, drills, guillotines, and press brakes. Conduct routine inspections and quality checks of welds and finished products, identifying and rectifying any defects. Operate overhead cranes and material handling equipment safely to move large components where necessary. Maintain a clean, safe, and organised work area, adhering strictly to all health and safety guidelines and procedures. Collaborate effectively with team members, supervisors, and other departments to ensure efficient project delivery. Complete all required paperwork and documentation accurately, including time sheets and material lists for traceability. Skills and Qualifications Proven experience as a Welder Fabricator, with specific expertise in architectural metalwork and structural steelwork. Proficiency in MIG welding is essential; competence in TIG and/or Stick welding is highly desirable. Ability to read, interpret, and work accurately from complex engineering drawings and technical plans. Relevant welding qualifications (e.g., Level 2 or Level 3 Diploma in Fabrication and Welding Engineering, or equivalent experience/certifications). Strong attention to detail and a commitment to producing high-quality work. Good mathematical skills for measurements and calculations. Manual dexterity and physical stamina to perform the demands of the role. Knowledge of health and safety procedures and the ability to work safely and responsibly

Sales and Business Development Manager, Engineering, £60,000 - £70,000 Basic, £100K OTE + company car + pension. This is a senior business development role with a specialised fabricator of machinery that has a long history of addressing unique client challenges. Each client represents a blank slate, where you will identify their needs, propose practical solutions, and collaborate with the technical team to bring the machine from concept to design and fabrication. Order values range from £40,000 to £1.5 million, and clients are located globally. The entire process, from concept to finished machine, is carried out in-house in the UK to ensure the highest quality of the final product. Example projects for 2025 include industrial furnaces, turbines, compactors, and pulping machines. We're looking for a Sales and Business Development Manager with the technical knowledge to understand complex customer problems and have the commercial and engineering knowledge to suggest practical solutions. This is a remote role, working from home and meeting clients as needed. However, to apply, you need to live in the North-West of England. About the Role of Sales and Business Development Manager This is a fantastic opportunity for you to take ownership of the sales process from day one. Until now, all generated leads have been handled by third-party sales agencies, but the firm is now looking to bring this function in-house. You will have the freedom to implement sales processes and systems that have proven effective for you in the past, including CRM, inbound marketing tools, and outreach strategies. You will be responsible for identifying and securing new business opportunities on a global scale. Your success in this role will be rewarded with the opportunity to grow your own team and become a member of the senior leadership team. What we're looking for • We need someone with a background in mechanical engineering who has experience selling bespoke engineering solutions., • The ideal candidate will have the technical know-how to meet with clients, understand their challenges, and then work with the internal technical team to develop and quote a solution., • This is a role that requires resilience and self-motivation. You'll be managing your own sales pipeline using a CRM system that you will implement, so you'll need to be organised and proactive. In Return, You Will Receive • A competitive salary of £60,000 to £70,000, depending on experience., • A commission/bonus scheme to be agreed between you and the company with a realistic OTE of £100,000, • 25 days of annual leave, plus Bank Holidays., • A company car and a pension plan. Interviews for this position will be held in early September, with a view to a start date in October. To Apply Email your CV to This vacancy is being advertised by Aaron Wallis Recruitment and Training Limited operating as an Employment Agency, registered in England No. 6356563. View our Privacy Policy and Candidate Privacy Notice

Buyer – Fabrication & Timber/Joinery.

We are looking for a MIG Welder for the CV7 area Location: Coventry, CV7 Pay Rate: From £14.00 per hour Shift: Day Shift Monday to Friday Job Type:Temporary Start Date: Immediate starts available MIG Welder Required Weekly Pay Quest Employment are currently recruiting for an experienced MIG Welder to join a busy and growing business based in Coventry, CV7, working within a farm-based environment. This is an excellent opportunity for a skilled welder looking for immediate start work. You will be working on the fabrication and repair of agricultural frames, jigs and metal components in a hands-on workshop setting. The Role As a MIG Welder, your duties may include: MIG welding steel frames, jigs and agricultural equipment Fabricating and repairing bespoke metal components to a high standard Reading and working from engineering drawings where required Preparing materials for welding and fabrication Using hand and power tools safely and effectively Inspecting completed welds to ensure quality standards are met Carrying out general workshop duties as required Maintaining a clean, safe an...

Undertake fabrication, welding, repair, refurbishment and modification works to support operational delivery. Relevant plant maintenance, mechanical, fabrication, welding or engineering qualification. Relevant welding/fabrication training desirable.

A recruitment agency is seeking an experienced Operations Manager to lead the production facility for a growing offsite fabrication business in Coventry. The ideal candidate will have experience in offsite fabrication, mechanical services, or modular construction.

Steel Fabricator, Stainless Steel Fabricator, Carbon Steel Fabricator, TIG Welder, MIG Welder, Sheet Metal Worker, Metal Fabrication, Engineering Jobs Dublin, Fabrication Technician, CNC Fabrication, Workshop Fabricator, Site Fabricator, Manufacturing Jobs Ireland. Proven experience in stainless ste

Industry Expertise: Strong, verifiable background in practical Fabrication & Welding. Fabrication and Welding Instructor. We are seeking a skilled and passionate Fabrication and Welding Specialist to join an established training provider in the region.

Key Duties & Responsibilities: Interpret structural drawings, specifications and bills of quantities Carry out steel take-offs and prepare detailed cost estimates Source and compare supplier and subcontractor pricing Prepare, submit and follow up tenders and BAFO responses* Liaise with clien

Fabrication and Welding Instructor Location: Hull & surrounding areas (Multi-site travel required) Position Type: Full-time, Permanent Hours: Monday - Thursday (08:00 - 16:15), Friday (08:00 - 16:00) About the Role We are seeking a skilled and passionate Fabrication and Welding Specialist to jo

DT Technician – Maintain Laser Cutters, 3D Printers, and CAD/CAM Systems – Lewisham A technology-focused secondary school in Lewisham is seeking a highly skilled DT Technician specializing in Digital Fabrication and CAD/CAM systems from January 2026. Specialist role in maintaining state-of-the-a

Quality Inspector (Fabrication Rail Manufacturing).

DT Technician – Maintain Laser Cutters, 3D Printers, and CAD/CAM Systems – Camden A technology-focused secondary school in Camden is seeking a highly skilled DT Technician specializing in Digital Fabrication and CAD/CAM systems from January 2026. Specialist role in maintaining state-of-the-art d

CAD CAM Programmer position in sheet metal fabrication, focusing on laser cutting, metal forming, and bending.

DT Technician – Maintain Laser Cutters, 3D Printers, and CAD/CAM Systems – Sheffield A technology-focused secondary school in Sheffield is seeking a highly skilled DT Technician specializing in Digital Fabrication and CAD/CAM systems from January 2026. Specialist role in maintaining state-of-the

Seeking an experienced Fabrication Welder for a role in Skelmersdale, Lancashire, offering top hourly rates.

DT Technician – Maintain Laser Cutters, 3D Printers, and CAD/CAM Systems – Richmond A technology-focused secondary school in Richmond is seeking a highly skilled DT Technician specializing in Digital Fabrication and CAD/CAM systems from January 2026. Specialist role in maintaining state-of-the-a

Seeking a Project Manager to join a growing company, managing projects within a fast-paced team.

Mechanical Engineer needed for project management in fabrication/structural industry.

Are you a Fabrication/Workshop Manager or a Fabricator looking to take the next step in their career and step into a managerial role, from a Sheet Metal/Engineering background, looking for a role at a precision Engineering company with ov. Fabrication/Workshop Manager (Early Finish Friday).

General Manager and Assistant Manager to ensure we are providing a great customer service journey, along with the front of house team.Supporting in the safe running of the business and having great standards to ensure every shift runs smoothly.If you interested in progressing your career with us we'

Skibound Seasonal Ops and Transport Supervisor - France.Part of the Experience Education Group, SkiBound has specialized in school and adult group travel for over 40 years.As well as our locally run hotels, SkiBound operate ClubHotels which are exclusive properties run by Skibound English speaking s

School Cook Supervisor-beaulieu Park Pr.We're currently recruiting an ambitious Chef to help us create exceptional food experiences for CH&CO on a part time basis contracted to 27.As a Chef, you will be responsible for preparing and serving the kind of food that truly brightens our clients' and cust

Cover Supervisor Opportunities – Warwickshire.Recruiting on behalf of Tudor Grange Academies Trust.Day-to-day, short-term and long-term assignments.Competitive daily rates, dependent on experience.The Supply Register is proud to be working in partnership with.Cover Supervisors to support secondary

Role: Secondary school Cover Supervisor.The suitable candidate will have the following skills;.Excellent classroom management skills.Be able to inspire and motivate.Provide new and innovative ideas for the faculty.Are you a Cover Supervisor looking for a new opportunity?.Remedy Education are seeking

Primary School on the wirral is seeking a.As a Midday Supervisor, you will play an important part in ensuring children have a safe, happy, and enjoyable lunchtime.Supervising children during lunch and on the playground.Ensuring pupils are safe, well cared for, and supported throughout the lunchtime

Cover Supervisor - RutlandPermanent | Full-Time | September Start | Salary: £19,392-£20,669 per annumReady to take the next step in your education career?Whether you're an experienced Cover Supervisor, an aspiring teacher, or someone with experience working with young people, we have an exciting p

SCALE 7-11 £19,940 TO £21,631 PRO-RATA SALARY.Permanent, Part Time (Term-time plus 1 week).With effect from September 2026, we are seeking to appoint a Cover Supervisor to join theAcademy’s Student Support Team.The Student Support Team is a very close-knit and effective group of individuals who

Cover Supervisor - RutlandPermanent | Full-Time | September Start | £19,392-£20,669 per annumMake a difference in the classroom every day.Are you looking for a rewarding role within education where every day brings something new?Aspire People are recruiting on behalf of a welcoming secondary schoo

Rate: £300 per day via an umbrella company.We are seeking an experienced Fabric Supervisor to join the Property Services team within a busy local authority.This role is key to maintaining the condition, safety, and usability of our corporate estate, ensuring buildings are fit for purpose for staff,

Cover Supervisor - Secondary School | RutlandPermanent Opportunity | September Start | £19,392-£20,669 per annumThinking about a career in teaching?This could be the perfect opportunity to gain valuable classroom experience before taking the next step.Aspire People are working with a supportive se

Rate: £300 per day via an umbrella company.We’re looking for an experienced M&E Supervisor to join the Property Services team within a local authority.You’ll play a key role in ensuring the safe, compliant, and efficient operation of the corporate estate, supporting essential public service