Offres Engineering à WashingtonCréer des alertes d'emploi

Fire & Security Engineer – £55k OTE + Company Van (Private Use) Salary: £36,000 – £40,000 (depending on experience) OTE: £55,000+ with uncapped commission structure Industry: Fire & Security About the Company Join a large national Fire & Security company that is a Gent system integrator, delivering high-quality solutions across fire alarms, access control, CCTV, and intruder alarm systems. With a stro... ZIPC1_UKTJ

Rewards and Benefits on Offer;Immediate start availableCompetitive basic salaryDayshift25 days annual leave + Bank HolidaysFree on-site parkingA streamlined, quick interview processMTrecs New Opportunity;MTrec Technical are proudly representing our prestigious manufacturing client, based near Washington by recruiting a permanent Electrical Engineer. You will be joining an industry leading company, with an excellent team-based culture and fantastic long-term career prospects.The Job Youll Do;Design, development, and delivery of electrical systems for a range of projectsDesign and manufacture of electrical systems, ensuring compliance with specifications, standards, and regulations.Work closely with estimators to prepare accurate project cost estimates and schedules.Develop and review CAD designs and schematics for electrical systems, ensuring all designs meet regulatory and safety requirements.Coordinate with manufacturing and installation teams to ensure designs are translated effectively into final products.Manage project timelines, resources, and budgets to ensure successful delivery of engineering solutions.Provide technical expertise and guidance to junior engineers and other team members.Ensure quality assurance and control standards are met at all stages of the project lifecycle.Foster a culture of safety, efficiency, and innovation within the engineering teamLiaise with clients and other stakeholders, ensuring all expectations are met or exceeded.Drive continuous improvement within the electrical engineering processes and team.Oversee electrical projects from design through to installation and commissioningCoordinate with clients, contractors, suppliers, and internal teams to ensure smooth project executionAbout You;HNC or above in an Electrical discipline is essential.Proven experience (2+ years) in Electrical Engineering or similarProficiency in CAD software (AutoCAD Electrical, EPLAN or similar)Understanding of BS7671 wiring regulations, BS EN 61439 and IEC standardsStrong understanding of electrical schematicsExcellent problem-solving skillsStrong communication skills, both written and verbalTPBN1_UKTJ

Rewards and Benefits on Offer; \n\n • Competitive salary.\n, • Career progression opportunities.\n, • Stable growing organisation.\n, • Generous benefits package.\n, • Permanent employment.\n, • Immediate start.\n\n MTrecs New Opportunity; \n MTrec Technical are proudly representing our prestigious Engineering client, based near Washington, with their plans for growth and expansion, by recruiting a permanent Mechanical Design Engineer to join ... \n \n ZIPC1_UKTJ

MTrecs new career opportunity \n Our client are leaders in their industry sector, they are looking to recruit a Multi Skilled Maintenance Engineer on a permanent basis. \n The role will be working a 3 shift system (6-2, 2-10, 10-6). \n The Job youll do \n\n • Diagnosis and repair of special purpose equipment and make sure it works correctly.\n, • Formulation and execution of effective (value-added) planned maintenance (PM)...\n\n \n ZIPC1_UKTJ

HVAC Engineer\n Location: Gateshead Salary: £43,000 per annum Working Hours: Monday – Friday, 06:00 – 14:30 Contract Type: Permanent Sector: Facilities Management Job Overview\n We are currently recruiting for an experienced HVAC Engineer to join a facilities management team working within a large distribution centre in Gateshead. \n This is a fantastic opportunity for a skilled HVAC professional to join a sta... \n \n ZIPC1_UKTJ

Job Description\n Drainage engineer \n Hebburn \n Permanent/Full time \n Competitive Salary plus company benefits. \n Here at Jet Aire, were on the lookout for a skilled and motivatedDrainage Engineerto deliver high-quality drainage services, including maintenance, cleaning, and reactive works, ensuring systems are functioning effectively. The role involves the safe operation of specialist equipment, working across ... \n \n ZIPC1_UKTJ

Site based Air Conditioning Engineer - Gateshead - National Facilities Management Organisation: FMCG CBW Staffing Solutions are seeking a skilled Air Conditioning Engineer to join our clients team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems to ensure opti... ZIPC1_UKTJ

Senior Service Desk Engineer – 2nd Line \n Salary: Up to £35,000 per annum \n Location: South Tyneside \n \n My client, based in South Tyneside, is My client is a rapidly growing IT business, who provide a managed service solution to organisations across the UK. \n Due to their continued growth, they are seeking a Senior Service Desk Engineer (2nd Line), with a particular focus on Networking capabilities. \n \n The Role \n\n • Act as the second line of support for IT issues via phone, email, and ticketing systems.\n, • Troubleshoot hardware, software, and network problems, escalating when required\n, • Manage user accounts and access rights in Microsoft 365 and Active Directory\n, • Provide support across SharePoint, including setting up permissions\n, • Configure and support desktops, laptops, and mobile devices\n, • Keep tickets updated and resolved in line with SLAs\n, • Assist with IT projects, rollouts, and system improvements\n\n \n The Person \n\n • Proven experience in an IT support or service desk role, specifically within an IT Managed Services environment\n, • Strong knowledge of Windows OS, Microsoft 365, and Active Directory\n, • Holder of a current Microsoft certification (365, Azure etc.)\n, • Strong knowledge of networking (DNS, DHCP, VPN, TCP/IP) and router/firewall configuration\n, • Hold an up-to-date CompTIA N+ certificate (desired)\n, • Hold an up-to-date CompTIA A+ certificate (desired)\n, • Excellent troubleshooting and problem-solving skills\n, • Customer-focused with strong communication skills\n, • Hold a full driving licence and own vehicle, and willing to travel to client sites when required\n\n \n This is a fantastic opportunity to join a rapidly growing and ambitious organisation at an exciting time with genuine opportunities for career development and progression. \n Alongside this, their supportive environment and culture is designed to develop talent, with an ongoing commitment to your personal and professional development, with continuous product training at the heart of their offering. \n \n The role office based from their South Tyneside HQ and will involve site visits to clients. With this in mind, a driving licence and access to your own vehicle is essential in order to be considered for the role. Post a successful probationary period, they are offering a hybrid working model. The role is a Mon-Fri operation, but also offers the optional overtime for ‘on-call’ work. \n If you feel you have the qualities they seek, please forward your CV and covering letter indicating your current package to Graeme Parker at GEM Partnership or for a discreet conversation call their Peterlee office. \n \n GEM Partnership is acting as an employment agency on this vacancy. \n Due to the high volume of applications we receive, we are unable to contact every candidate individually. If you do not hear from us within 7 days of submitting your application, please assume that you have not been shortlisted on this occasion. \n We are committed to fair, consistent, and inclusive recruitment practices, and all applications are reviewed in line with relevant employment legislation and our equal opportunities principles. \n \n To stay safe in your job search we recommend that you visit JobsAware, a non-profit, joint industry and law enforcement organisation working to combat job scams. Visit the JobsAware website to get free, expert advice for safer job search.

Service Desk Engineer – 1st Line \n Salary: Up to £29,000 per annum \n Location: South Tyneside \n \n My client, based in South Tyneside, is My client is a rapidly growing IT business, who provide a managed service solution to organisations across the UK. \n Due to their continued growth, they are seeking a Service Desk Engineer (1st Line), to join their already well established Service Desk team. \n \n The Role \n\n • Act as the first line of support for IT issues via phone, email, and ticketing systems.\n, • Remotely troubleshoot hardware, software, and network problems, escalating when required\n, • Utilising strong knowledge of Microsoft 365\n, • Remote hardware maintenance and support\n, • Configure and support desktops, laptops, and mobile devices\n, • Keep tickets updated and resolved in line with SLAs\n\n \n The Person \n\n • Proven experience in an IT support or service desk role, specifically within an IT Managed Services environment\n, • Strong knowledge of Windows OS, Microsoft 365, and Active Directory\n, • Holder of a current Microsoft certification (365, Azure etc.)\n, • Hold an up-to-date CompTIA A+ certificate (desired)\n, • Excellent troubleshooting and problem-solving skills\n, • Customer-focused with strong communication skills\n\n \n This is a fantastic opportunity to join a rapidly growing and ambitious organisation at an exciting time with genuine opportunities for career development and progression. \n Alongside this, their supportive environment and culture is designed to develop talent, with an ongoing commitment to your personal and professional development, with continuous product training at the heart of their offering. \n \n The role office based from their South Tyneside HQ although hybrid working will be considered for an exceptional candidate. The role is a Mon-Fri operation, but also offers the optional overtime for ‘on-call’ work. \n If you feel you have the qualities they seek, please forward your CV and covering letter indicating your current package to Graeme Parker at GEM Partnership or for a discreet conversation call their Peterlee office. \n \n \n Due to the high volume of applications we receive, we are unable to contact every candidate individually. If you do not hear from us within 7 days of submitting your application, please assume that you have not been shortlisted on this occasion. \n We are committed to fair, consistent, and inclusive recruitment practices, and all applications are reviewed in line with relevant employment legislation and our equal opportunities principles. \n \n To stay safe in your job search we recommend that you visit JobsAware, a non-profit, joint industry and law enforcement organisation working to combat job scams. Visit the JobsAware website to get free, expert advice for safer job search.

\n \n \n \n \n We're looking for a Road Safety Engineer to join our Kier Design team based nationwide.Kier Design are a top-25 engineering consultancy, delivering a wide range of services across all sectors of the built environment, providing construction-focused, innovative and sustainable solutions. We have preferential access to Kier's £11bn+ project pipeline, including mega projects like High Speed 2 and Hinkley Point C, frameworks with national and local government and other public bodies, and a range of other interesting projects in every sector of the built environment.\n We believe in building teams around our people, rather than squeezing people into our teams, we want to help you carve out a role in which you'll grow and thrive for many years to come. Offering market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers. Actively promoting, so you can keep pushing and stretching yourself. \n \n Location: Kier Design – Nationwide - remote working available, with occasional travel to the office required. Hours: 37.5 hours per week (Monday to Friday 09:00 – 17:00) - some flexibility on hours available if desired, just let us know when you speak to us. \n We are unable to offer certificates of sponsorship to any candidates in this role. \n \n What will you be responsible for? \n As a Road Safety Engineer, you'll be working within the Road Safety Team, supporting them in delivering high-quality technical outputs for road safety initiatives. Delivering technical solutions for road safety projects across the UK, you'll be contributing to highway schemes ranging from small improvements to major infrastructure projects for both internal and external clients. This is an excellent opportunity to develop your expertise whilst making a real difference to road safety and community wellbeing. \n Your day to day will include: \n \n • Contributing to Road Safety Audits, Walking, Cycling and Horse-Riding Assessments, and Equality Impact Assessments in line with DMRB standards\n, • Preparing comprehensive reports and technical documents to meet client specifications\n, • Undertaking site visits during daytime and night time as required\n, • Providing innovative solutions to engineering challenges and technical advice to design teams\n, • Building positive relationships with clients and stakeholders, attending meetings and reporting on project progress\n \n What are we looking for? \n This role of Road Safety Engineer is great for you if: \n \n • You're a member of a professional body (IEng/CEng status or working towards it)\n, • You hold a valid CSCS Card and UK driving licence\n, • You enjoy collaborative working and building strong relationships with colleagues and clients\n, • You're thorough, disciplined and focused in your approach to delivering projects\n, • You're committed to safety, ethical practice and making a positive impact on communities\n \n We're all about finding potential here at Kier, and transferable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier. \n \n #LI-MA1 \n \n \n

\n \n \n Temporary Works Design Engineer \n \n We're looking for civil, structural and/or geotechnical engineers to join our team in various locations around the UK. \n Locations: Birmingham / Bristol / Cambridge / Cardiff / Glasgow / Leeds / Liverpool / London / Manchester / Newcastle / Norwich / Plymouth – agile working, with up to 1-2 days per week from home if desired \n Hours: 40 hours per week – flexibility on hours available if desired \n Salary: Starting from £40k per annum \n Sector: Working across all sectors of the built environment \n \n Join us as a Temporary Works Design Engineer and become part of one of the UK's leaders in temporary works design and management and construction-related technical services. As part of our 100-strong team, you'll get to work on hundreds of projects across one of the most diverse and high-profile portfolios in the country, with access to Kier's £11bn+ project pipeline – supporting complex construction and major infrastructure schemes from concept through to delivery. \n Are you… \n \n • Practically-minded, with a strong grounding in civil, structural and/or geotechnical engineering principles and knowledge of applicable design standards?\n, • Working towards Chartered Engineer or Incorporated Engineer status (CEng or IEng) or of equivalent experience?\n \n Do you… \n \n • Enjoy applying first principles thinking to real-world construction challenges, combining a keen eye for detail with sound engineering judgement, a focus on safety, buildability, sustainability and a flair for innovation and creative problem-solving?\n, • Have experience of temporary works design and/or management, or other practical construction experience?\n, • Have strong organisational and communication skills, and enjoy working as part of collaborative teams?\n, • Want to join a top-25 engineering consultancy, recognised as a one of Glassdoor's 50 best places to work?\n \n What will you be responsible for? \n Contributing to the delivery of a broad range of complex construction engineering services, including some or all of: temporary works design and checking, reviewing permanent designs for compliance and buildability, supporting tenders and preconstruction planning, and providing technical support to overcome construction-stage and post-construction issues and defects. \n Main responsibilities \n \n • Producing, checking and reviewing design outputs such as calculations, sketches, drawings, 3D models, reports and risk assessments, ensuring compliance with CDM, SHE procedures and QA processes\n, • Acting as Project Lead for simpler projects, managing technical scope, programme, budget and relationships with preconstruction and construction teams, from bid through to delivery\n, • Developing yourself, contributing to the continuous improvement of processes and systems, enabling the business to adapt to current and future challenges.\n \n \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier. \n #LI-MA1 \n \n \n \n

\n \n \n Senior Temporary Works Engineer \n \n We're looking for civil, structural and/or geotechnical engineers to join our team in various locations around the UK. \n Locations: Birmingham / Bristol / Cambridge / Cardiff / Glasgow / Leeds / Liverpool / London / Manchester / Newcastle / Norwich / Plymouth – agile working, with up to 1-2 days per week from home if desired \n Hours: 40 hours per week – flexibility on hours available if desired \n Salary: Starting from £50k per annum \n Sector: Working across all sectors of the built environment \n \n Join us as a Senior Temporary Works Engineer and become part of one of the UK's leaders in temporary works design and management and construction-related technical services. As part of our 100-strong team, you'll get to work on hundreds of projects across one of the most diverse and high-profile portfolios in the country, with access to Kier's £11bn+ project pipeline – supporting complex construction and major infrastructure schemes from concept through to delivery. \n Are you… \n \n • Practically-minded, with a strong grounding in civil, structural and/or geotechnical engineering principles and knowledge of applicable design standards?\n, • An Incorporated Engineer (IEng) or working towards Chartered Engineer status (CEng) with an equivalent level of experience?\n \n Do you… \n \n • Enjoy applying first principles thinking to real-world construction challenges, combining a keen eye for detail with sound engineering judgement, a focus on safety, buildability, sustainability and a flair for innovation and creative problem-solving?\n, • Have experience of temporary works design and/or management, or other practical construction experience?\n, • Have strong organisational and communication skills, and enjoy working as part of collaborative teams?\n, • Want to join a top-25 engineering consultancy, recognised as a one of Glassdoor's 50 best places to work?\n \n What will you be responsible for? \n Leading the delivery of a broad range of construction engineering services, including some or all of: temporary works design and checking, reviewing permanent designs for compliance and buildability, supporting tenders and preconstruction planning, and providing technical support to overcome construction-stage and post-construction issues and defects. \n Main responsibilities \n \n • Producing, checking and reviewing design outputs such as calculations, sketches, drawings, 3D models, reports and risk assessments, ensuring compliance with CDM, SHE procedures and QA processes\n, • Acting as Project Lead for multiple projects, managing technical scope, programme, budget and relationships with preconstruction and construction teams, from bid through to delivery\n, • Developing yourself, other individuals and the wider team, contributing to the continuous improvement of processes and systems, enabling the business to adapt to current and future challenges.\n \n \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier. \n #LI-MA1 \n \n \n

GitLab is the intelligent orchestration platform for DevSecOps. GitLab enables organizations to increase developer productivity, improve operational efficiency, reduce security and compliance risk, and accelerate digital transformation. More than 50 million registered users and more than 50% of the Fortune 100* trust GitLab to ship better, more secure software faster. The same principles built into our products are reflected in how our team works: we embrace AI as a core productivity multiplier, with all team members expected to incorporate AI into their daily workflows to drive efficiency, innovation, and impact. GitLab is where careers accelerate, innovation flourishes, and every voice is valued. Our high-performance culture is driven by our values and continuous knowledge exchange, enabling our team members to reach their full potential while collaborating with industry leaders to solve complex problems. _ as we build technology that transforms how the world develops software. *Fortune 500® is a registered trademark of Fortune Media IP Limited, used under license. Claim based on GitLab data. Fortune 100 refers to the top 20% ranked companies in the 2025 Fortune 500 list, published in June 2025. Fortune and Fortune Media IP Limited are not affiliated with, and do not endorse products or services of GitLab. As a Solutions Architect in GitLab's Northern Europe team, you'll be a trusted advisor to GitLab prospects and customers, helping them understand how GitLab's DevSecOps platform addresses both technical requirements and business objectives across the entire software development lifecycle. You'll guide organizations through their digital transformation journeys, from planning through monitoring, using your technical expertise, understanding of cloud and modern software development practices, and strong customer empathy. Reporting to a regional Solutions Architect manager and partnering closely with Account Executives and cross-functional teams, you'll own technical evaluations (including proof of value initiatives and workshops), shape solution architectures, and serve as the voice of the customer back to Product Management. You'll focus on driving successful platform adoption, influencing revenue growth through solution selling, and building long-term, trust-based relationships that showcase GitLab's differentiated position in an AI-driven DevSecOps landscape. • Lead technical discovery, demos, and validation to show how GitLab's AI-powered DevSecOps platform meets customers' technical and business needs across the full lifecycle., • Drive the technical evaluation process as the directly responsible individual, including solution design, POC/POV ownership, workshop design, and the technical components of tenders, audits, and value stream assessments., • Collaborate with Account Executives and regional sales teams across Northern EU to shape and execute account strategies that support new customer acquisition and expansion., • Build and deepen relationships with technical practitioners and business leaders, guiding them through GitLab-driven transformation and enabling them to become GitLab advocates., • Advise customers on modern software development, continuous integration, continuous deployment, security, and cloud practices, challenging existing approaches to improve return on investment., • Serve as the voice of the customer with Product Management, Engineering, Sales, and Marketing by sharing feedback, use cases, and competitive insights that inform roadmap and positioning., • Maintain and extend your technical expertise in GitLab, DevSecOps, AI, and related cloud technologies, creating reusable examples, best practice guidance, and technical collateral for customers and partners., • Invest in your own growth and development through ongoing learning, mentorship, and knowledge sharing to continuously improve the impact of the Solutions Architect team., • 4+ years of experience engaging with customers in technical pre-sales, consulting, or similar roles, guiding them through solution design and evaluation., • Proficiency with the end-to-end software development lifecycle, including modern DevSecOps practices and continuous integration and continuous deployment workflows., • Hands-on experience with GitLab or comparable source control, CI/CD, and collaboration platforms, and the ability to map platform capabilities to customer use cases., • Practical knowledge of cloud computing concepts and related technologies, with the ability to discuss deployment, security, and operations options with technical teams., • Ability to lead technical evaluations such as proofs of concept or proofs of value, contribute to tenders or audits, and design and run workshops or value stream assessments., • Clear technical communication and presentation skills, with the ability to adapt messages for practitioners through to senior business and technical decision makers., • Skill in building trusted relationships, listening with empathy, and acting as a customer advocate to internal teams such as Product, Engineering, Sales, and Marketing., • Motivation to continuously develop professionally, including learning new technologies, deepening GitLab platform expertise, and applying transferable experience from related fields. #LI-CM1 We, the Solutions Architect team, are part of GitLab's Sales organization and serve as the technical counterpart to Account Executives, with this role focused on opportunities across Northern EU reporting into a regional Solutions Architect Manager. Our mission is to help customers realize the full value of GitLab's AI-powered DevSecOps platform by advising on architecture, running technical evaluations such as proofs of value, and guiding customers through their digital transformation. We work closely with Sales, Product Management, Engineering, and Marketing, collaborating asynchronously across regions to share best practices, create reusable technical collateral, and act as the voice of the customer. We are focused on helping customers modernize end-to-end software delivery, adopt GitLab at scale, and navigate a rapidly evolving AI and DevSecOps landscape. How GitLab Supports Full-Time Employees • _, • _, • _, • _, • _, • _ Please note that we welcome interest from candidates with varying levels of experience; many successful candidates do not meet every single requirement. Additionally, studies have shown that people from _ are less likely to apply to a job unless they meet every single qualification. If you're excited about this role, please apply and allow our recruiters to assess your application. Country Hiring Guidelines: GitLab hires new team members in countries around the world. All of our roles are remote, however some roles may carry specific location-based eligibility requirements. Our Talent Acquisition team can help answer any questions about location after starting the recruiting process. Privacy Policy: Please review our _ Your privacy is important to us. GitLab is proud to be an equal opportunity workplace and is an affirmative action employer. GitLab’s policies and practices relating to recruitment, employment, career development and advancement, promotion, and retirement are based solely on merit, regardless of race, color, religion, ancestry, sex (including pregnancy, lactation, sexual orientation, gender identity, or gender expression), national origin, age, citizenship, marital status, mental or physical disability, genetic information (including family medical history), discharge status from the military, protected veteran status (which includes disabled veterans, recently separated veterans, active duty wartime or campaign badge veterans, and Armed Forces service medal veterans), or any other basis protected by law. GitLab will not tolerate discrimination or harassment based on any of these characteristics. See also and . If you have a disability or special need that requires , please let us know during the .

JOB ADVERT Senior Quality Engineer The Company A leading global automotive components manufacturer specialising in premium interior systems. Known for an innovative approach and commitment to excellence, the organisation is a trusted partner for major automotive manufacturers. The company prides itself on supporting colleagues through comprehensive health and wellbeing initiatives, career development pathways, and strong management support. Job Title Senior Quality Engineer (Permanent) Location North East Manufacturing Site, UK Salary £58,000 per annum Working Hours Full-time, standard manufacturing hours Benefits Comprehensive health and wellbeing package, career development pathways, and dedicated management support to help you grow within the organisation. Job Description As a Senior Quality Engineer, you will be instrumental in supporting all Interiors Quality Assurance activities across the manufacturing facility. This Senior Quality Engineer role requires a self-motivated, proactive professional with exceptional communication and leadership capabilities. The position involves maintaining quality systems, standards, and excellent customer PPM performance across all interior trim moulding and assembly operations. In this Senior Quality Engineer capacity, you will work closely with major suppliers, major automotive customers, and internal project teams. Your responsibilities will encompass QRQC activity management, customer liaison, quality audits, calibration oversight, and continuous improvement initiatives including kaizen and PHA activities. The Senior Quality Engineer will stand in for the Quality Assurance Manager when required and ensure APQP/TS16949 documentation and standards are maintained and adhered to across all operations. Skills & Experience Looking for a Senior Quality Engineer with the following qualifications and experience: • Minimum HNC level qualification in an appropriate discipline or equivalent experience • 5+ years in high-volume manufacturing, ideally CPM or injection moulding • Process auditing experience with IATF/ISO auditor qualification (preferred) • Fluent English; additional language skills valued • Strong Microsoft Office skills and excellent teamwork abilities Why Should You Apply? Join a dynamic, innovative organisation committed to driving sustainable results and making a real impact. This role offers excellent career progression within a growing, forward-thinking company where your contributions are genuinely valued. You'll work in an inclusive culture that encourages innovation and supports the development of ambitious quality professionals seeking to advance their careers in automotive manufacturing. To apply, please submit your CV and a brief covering letter

MTrec’s new career opportunity Our client are market leaders in their industry sector, they are looking to recruit a Senior Quality Engineer on a permanent basis. The Job you’ll do This Senior Quality Engineer role requires a self-motivated, proactive professional with exceptional communication and leadership capabilities. The position involves maintaining quality systems, standards, and excellent customer PPM performance across all interior trim moulding and assembly operations. In this Senior Quality Engineer capacity, you will work closely with major suppliers, major automotive customers, and internal project teams. As a Senior Quality Engineer, you will be instrumental in supporting all Interiors Quality Assurance activities across the manufacturing facility Your responsibilities will encompass QRQC activity management, customer liaison, quality audits, calibration oversight, and continuous improvement initiatives, including kaizen and PHA activities. The Senior Quality Engineer will stand in for the Quality Assurance Manager when required and ensure APQP/TS16949 documentation and standards are maintained and adhered to across all operations. About You Minimum HNC level qualification in an appropriate discipline or equivalent experience. 5+ years in high-volume manufacturing, ideally CPM or injection moulding. Process auditing experience with IATF/ISO auditor qualification (preferred). Strong Microsoft Office skills and excellent teamwork abilities. The Rewards and the benefits * Superb benefits package, please get in touch for more details

Job Title: AI Trainee Engineer – £45,000–£75,000 – Job Programme This is a self-funded programme that leads to employment, fees apply. Job Guarantee Complete the programme and get a job, or get your course fees back. Looking to start a career in AI Engineering? We are offering a structured pathway into AI Engineering, designed to help you enter one of the fastest-growing sectors in tech with no prior experience. This opportunity includes training, support, and access to our specialised recruitment support for job roles across the UK. No prior experience required. Train online at your own pace and become job-ready in as little as a few weeks. Our programme includes: • Official AWS Certified Cloud Practitioner certification • Training in Python, Machine Learning, and AI systems • Hands-on projects using real-world AI tools and technologies • Professional CV and LinkedIn support • Interview preparation • Dedicated recruitment support until placed • Personalised 1-1 tutor support • Hands-on projects to build your AI portfolio Flexible, affordable, achievable To make things easier, we offer flexible payment options, allowing you to spread the cost of your training over 12 months so you can get qualified without financial pressure. Salary expectations: • AI Engineer: £45,000 – £60,000 • Machine Learning Engineer: £60,000 – £75,000 • Progression into senior AI roles with higher earning potential We support you into employment We focus on outcomes, not just training. ITOL Recruit has over 15 years of experience supporting candidates into roles across AI, machine learning, and data science roles. From the beginning of your journey to the end, you are supported by qualified tutors, and at the end, our specialised recruitment team helps you secure your first job role. Apply now to get started.

Job Title - Field Service Engineer \n Location - Covering NE, DH and SR Postcodes. (Newcastle, Durham and Sunderland) \n Salary: £30,000 - £37,000 (40 Hours) or £36,000 - £42,500 (45 Hours) \n Shift: Monday to Friday - 40 Hour or 45 Hour Week available \n Job Role: \n I'm working with a market-leading materials handling business that's looking to add an experienced Field Service Engineer to its growing team. This ro... \n \n ZIPC1_UKTJ

Power Electronics Engineer - Renewable EnergyMy client has recently made a new job available where they are looking for a Principal Power Electronics Engineer - Renewable Energy to join their multi-skilled R&D team based in Tyne & Wear, North East England.This company develops high performance permanent magnet electric motors and generators used in a variety of different application areas that include Rail, Energy and Power Sectors.My client is a technology business with diverse interests in a range of industries including the rail, defence and energy sectors where it is viewed as a developer of innovative and leading edge technologies. They have a truly global footprint with facilities in nearly every developed economy and ongoing high value, high profile technology projects.The successful candidate for thePower Electronics Engineer - Renewable Energy job- will;Be degree educated in electronic engineering or equivalent discipline.Have had experience in the design and development of analogue electronics.Ideally Have experience of SMPS, AC/DC, DC/DC.Experience within Rail, Energy or Transport sectorsAs well as being able to offer fantastic career opportunities, my client also offers a very competitive package with up to £8,000 relocating funds that you can use on everything including white goods, TV's etc.For further information regarding the job of Power Electronics Engineer - Renewable Energy based in Tyne & Wear, North East England please email an up to date CV to or call Nick Drain on 01582 878828.TPBN1_UKTJ

MTrecs new career opportunity \n Our client are market leaders in their industry sector. They are now looking to recruit a Maintenance Engineer on a permanent basis. \n The Job youll do \n\n • Plan, coordinate, and supervise maintenance activities across all plant machinery and systems to minimise downtime.\n, • Lead and manage a team of technicians, providing guidance, training, and supervision to ensure high standard...\n\n \n ZIPC1_UKTJ

MTrecs new career opportunityOur client are specialists in their industry sector.They are looking to recruit a Field Service Engineer on a permanent basis.The Job youll doTo carry out planned services and maintenance of company equipment.To accurately fault find and diagnose both mechanical and electrical issues.Identify required specialist equipment and connectors.Utilisation of the proper testing equipment for effective repair and maintenanceEnsure all equipment is set up as required by Contract Customer's SpecificationsModify generator fleet where required following instruction from the Technical Manager.Repair and maintain machinery as per company and manufacturer requirements.Attend equipment breakdowns as necessary to support the delivery of excellence customer service levels. This may require the post holder to work overtime, sometimes with short notice.Any other technical-related service as required by the business.Be part of the on-call Rota system.Support the development of high-performance teams by attending planned training, positively engaging with the training provider.Adherence to the Integrated Management Systems including Health and Safety, Environmental and Quality and all associated policies, standards, procedures and records.Ad hoc duties as the job requires.About YouWell organised and able to prioritise tasks.Ability to work autonomously and within strict deadlines to high standards with excellent attention to detail.Confident self-starter.Experience with mechanical/electrical engineering or diesel fitting.Familiar with electronic systems and mechanical components (including engines and alternators).Deep Sea knowledge and or synchronising experience.Good IT skills.Excellent organisational skills with the ability to work under pressure to meet tight deadlines.Excellent communication skills, confident, friendly and professional mannerAbility to prioritise on a daily basis a variety of tasks as and when they arise and deal with them with full confidentiality, tact and diplomacy.Strong customer focus.Field Service Engineer Job Description.Experience of working in a team and on own initiative with minimum supervision.The Rewards and the BenefitsPermanent jobCompetitive salaryTPBN1_UKTJ

We're Hiring: HVAC Engineer ❄️🔧 🚨 📍 Gateshead 💷 Up to £42,000 + Benefits 🕒 Monday to Friday | 40 Hours Per Week We're looking for an experienced HVAC Engineer ❄️🔧 to join a leading engineering team in Gateshead. This is a fantastic opportunity to work within a large-scale, fast-paced critical environment, supporting the maintenance and operation of HVAC and mechanical building services systems across a busy operational site. 🔧 What you'll be doing: ✔️ Carrying out planned preventative maintenance (PPM) and reactive maintenance on HVAC and mechanical systems ✔️ Fault finding, servicing, and repairing air conditioning and ventilation equipment ❄️ ✔️ Maintaining AHUs, FCUs, chillers, and associated plant equipment ✔️ Supporting plant room inspections and routine maintenance activities ✔️ Ensuring all work is completed in line with Health & Safety and compliance standards 🦺 ✔️ Completing maintenance reports and documentation accurately 📝 ✔️ Working closely with the wider engineering and site teams to ensure smooth operations 👷 What we're looking for: F-Gas Category 1 qualification (essential) ❄️ Previous experience within a commercial maintenance or Facilities Management environment Strong HVAC fault-finding and maintenance experience 🔧 Good understanding of mechanical building services systems Ability to work independently and as part of a team Strong communication and problem-solving skills ⭐ Desirable: Experience working within critical or fast-paced environments Multi-skilled maintenance experience * Knowledge of compliance and plant room operations 💼 What's on offer: 💷 Salary up to £42,000 per annum 🕒 Monday-Friday working pattern ⏱️ 40-hour working week 🏢 Opportunity to work on a high-profile site 📚 Ongoing training and development opportunities 📈 Career progression within a professional engineering environment 🏦 Company benefits package 🚀 If you're an experienced HVAC Engineer ❄️🔧 looking for your next opportunity within a stable and professional environment, we'd love to hear from you! RG Setsquare is acting as an Employment Agency in relation to this vacancy

Rewards & Benefits on Offer; Competitive starting salary Healthy work/life balance Company pension scheme 25 days holiday plus public holidays Ongoing training and development opportunities Opportunity to work with advanced manufacturing technologies A collaborative and supportive working environment Genuine opportunity to influence processes and contribute to business growth The Company you will be working with; MTrec Recruitment are proudly representing our industry leading client due to continued growth, on their search for an experienced CAD/CAM Programmer & Manufacturing Engineer to join their engineering team. This is an exciting opportunity for an individual who enjoys combining design, programming, and manufacturing engineering to bring innovative products to life. The successful candidate will play a key role in developing manufacturing processes, creating CNC programs, supporting new product introduction, and driving continuous improvement across the business. The Role you will be doing; Reporting to the Technical & Quality Manager, the CAD/CAM Programmer & Manufacturing Engineer will be responsible for creating manufacturing-ready designs, programming CNC equipment, and supporting the production team to ensure products are delivered safely, efficiently, and to the highest quality standards. This is a hands-on role that requires both technical expertise and a practical approach to problem-solving. Key Responsibilities Create and optimise CNC machining programs using CAD/CAM software. Produce 3D models, engineering drawings, and manufacturing documentation. Use SolidWorks to develop and maintain product and assembly designs. Utilise Rhino (Rhinoceros 3D) for complex modelling and customer-specific design requirements. Generate production-ready artwork, engraving files, and technical graphics using Adobe Illustrator. Support the introduction of new products from concept through to production. Develop manufacturing methods, tooling requirements, and setup instructions. Work closely with Production and Quality teams to resolve technical issues and improve manufacturability. Drive continuous improvement activities focused on quality, productivity, and cost reduction. Support route creation, process planning, and manufacturing documentation. Ensure compliance with company quality, health & safety, and customer requirements. About You; Essential Experience & Qualifications HNC/HND, apprenticeship, or equivalent qualification in Mechanical, Manufacturing, Product Design, or Production Engineering. Proven experience in a CAD/CAM Programmer, Manufacturing Engineer, or similar role. Strong working knowledge of SolidWorks. Experience using Rhino (Rhinoceros 3D) Proficiency with Adobe Illustrator. Experience generating CNC programs using CAD/CAM software. Excellent understanding of manufacturing processes and CNC machining. Ability to read and interpret engineering drawings and specifications. Strong problem-solving skills and attention to detail. * Ability to manage multiple projects and priorities. Desirable Experience Experience within plastics, polymers, composites, or precision manufacturing. Knowledge of CNC milling and multi-axis machining. Fixture and tooling design experience. Lean Manufacturing and Continuous Improvement methodologies. New Product Introduction (NPI) experience. Familiarity with ISO 9001 quality systems

UK-Based | Hybrid/Flexible Working | Competitive Salary + Excellent Benefits We are partnering with an award-winning Civil and Structural Engineering consultancy to recruit a Senior Civil Engineer to join their growing team. This is a fantastic opportunity for an experienced engineer to take ownership of project delivery across a diverse portfolio, while working within a supportive and technically strong team. The Role As a Senior Civil Engineer, you will play a key role in the delivery of civil engineering consultancy services from feasibility through to construction. You’ll be trusted to lead on technical output while collaborating closely with colleagues across all levels. You will work on a variety of housing, residential, commercial, and extra care developments, delivering innovative and practical infrastructure solutions. Key Responsibilities Lead day-to-day delivery of civil engineering design projects Produce and review drainage, highway, and infrastructure designs Deliver SuDS, Flood Risk Assessments, and earthworks design Prepare drawings, technical reports, calculations, and site appraisals Ensure compliance with relevant UK design standards and planning requirements Liaise with clients, local authorities, and project stakeholders Support and mentor junior engineers within the team What We’re Looking For Degree (BEng/MEng/MSc/HNC/HND) in Civil Engineering Minimum 4 years’ UK consultancy experience Strong experience in drainage and highway design Knowledge of SuDS, FRA, earthworks, and UK planning processes Familiarity with standards including Manual for Streets and DMRB Proficient in AutoCAD, Causeway Flow, and Causeway Live Experience working with residential developers Strong communication skills and a proactive approach Full UK driving licence (desirable)

WHAT IS IN IT FOR YOU? Permanent role from day one Tyne & Wear Location Day shift office hours Salary – Engineer Level up to £44K / Senior up to £53K Annual bonus scheme Profit share bonus Salary sacrifice car scheme 25 days plus bank holidays Holiday buy and sell scheme Sports and Social funds – matched contributions Regular company activities and events to promote company engagement Company Pension Cycle to Work Scheme Private dental insurance Private medical insurance Paid membership to Professional Bodies THE BUSINESS The business fosters a supportive, inclusive, and collaborative work culture where continuous professional development is a priority. They are committed to helping our team members grow through dedicated training, mentorship, and opportunities to innovate. The business is seeking to recruit a Highways Design Engineer specialising in drainage. You will have experience working on Section 278 and Section 38 highway design projects and ideally have experience using drainage design software such as MicroDrainage or Causeway Flow Software. This role will be based in the Tyne and Wear area. THE ROLE Ensure designs are delivered within programme and within the budget provided; Managing resource allocations to ensure team members are fully utilised on the highest priority tasks; Work with Milestone’s Senior Management Team to assist with projects from other offices and disciplines; Ensuring that the requirements of all relevant Authorities and Statutory bodies are incorporated into designs, as appropriate; Undertaking and checking / authorising design information and reports providing effective feedback; Ensuring that all designs are prepared in accordance with MCHW, DMRB and/or local design guidance; Encouraging innovation and continuous improvement within the team and displaying sound independent judgement, and; Complying with relevant Health & Safety legislation, particularly the CDM Regulations and adopting a pro-active risk management / mitigation approach. THE PERSON Experience of working on Section 278 and Section 38 highway design projects; Pro-active management skills with confidence to manage teams in accordance with a growing and varied workload; Strong technical skills and experience in a range of highway design environments; Proven project management of highway projects and delivery to programme and budget; Display sound independent judgment; Experience with developing, mentoring and supervision of Highway Design staff; Robust working knowledge of highways technical documents within the DMRB; Experience managing the development of contract documents in accordance with relevant Highway contracts; Experience in highway drainage design and use of MicroDrainage or Causeway Flow software, To be able to work with or advise key clients on technical issues in the highway structures sector at a senior level, and; Demonstrate a working knowledge of the Civils 3D CAD package. Desirable Requirements Experience in the provision of cost-estimates, Member of a relevant Charted Institute, Hold a valid UK driving license TO APPLY Please send your updated CV to Tony Hutchinson or apply direct by calling Westray Recruitment Group

Exciting Opportunity: Electrical Design Engineer Are you ready to take your career to the next level in the dynamic world of Electrical Engineering? Join our client, a leading organisation in the Switchgear Manufacturing industry, as an Electrical Design Engineer! This is your chance to work on innovative projects while contributing to a supportive and flexible work environment. Location: Gateshead, Tyne and Wear Contract Type: Permanent Salary: £35,000 - £45,000 (dependent on experience) Working Pattern: Full Time About Us: Our client has been at the forefront of the Electrical Engineering sector since 1991, specialising in the design, manufacture, installation, commissioning, and maintenance of switchgear and control products. They cater to various sectors, including power, healthcare, chemical, and construction, making a significant impact across industries. Key Responsibilities: As an Electrical Design Engineer, you will: Design and Development: Create electrical schematics, wiring diagrams, and layout drawings for switchgear systems. Develop tailored solutions that comply with BS EN (phone number removed) standards. Utilise CAD tools, such as AutoCAD and EPLAN, for precise and efficient design documentation.Project Coordination: Collaborate with project engineers and production teams to ensure design feasibility and manufacturability. Provide technical support during installation and commissioning phases, backed by solid documentation.Quality and Compliance: Ensure all designs adhere to ISO 9001:2015 quality standards and health & safety policies. Maintain compliance with industry regulations and internal procedures.Continuous Improvement: Participate in design reviews and propose enhancements for performance, cost, and reliability. Contribute to retrofitting and upgrade projects for existing switchgear systems.To thrive in this role, you should possess: A degree in Electrical Engineering or an equivalent qualification Proven experience in switchgear design and electrical systems. Proficiency in design software, particularly AutoCAD and EPLAN. Solid knowledge of relevant standards (BS EN 61439, ISO 9001). Strong problem-solving and communication skills to drive collaboration and innovation.Why Join Us? Our client offers a vibrant and fast-paced working environment where your contributions are valued. Enjoy a culture that promotes: A supportive atmosphere with autonomy in your role. Flexibility to balance work and personal life. Opportunities for professional growth and continuous improvement.If you are passionate about electrical design and ready to make a difference in the switchgear manufacturing industry, we want to hear from you! Apply today and embark on a rewarding career path where your skills and ideas will shine. Let's build the future of electrical engineering together! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

An excellent opportunity for an experienced Project Design Engineer to join a well-established company based in Birtley, Gateshead.Job Type: Full-Time, Permanent.Location: Gateshead.Salary: Starting from £37,000 per annumAbout the Role:The companysDesign Engineers areresponsiblefor technicalprojectdelivery of hydraulicsystems.Their dutiesaretodesign,plananddeliverprojectstomeet customerneeds.Thescopeoftheengineeringbuilds may include hydraulic power units, control consoles, bespoke hydraulic systems, and manifolds.The project owner will be responsible for providing the technical information and documentation to the customer, suppliers, sub-contractors and our hydraulic technicians. They will be maintaining constant communicationwiththecustomerandensurethatallcommercial,technical,andfinancialtargetsaremet.Aspartofthisrolethereis anexpectationthattheprojectownerwillhavepresenceintheworkshopandon- site and may be involved in activities such as mechanical assembly and commissioning.Thispositionwillbeavariedandchallengingrolewithpositiveopportunitiesforamotivatedindividualto develop the position to achieve their own career goals.Main Duties:Communicationwith customerReviewandclarifycustomer requirementsPrepareengineeringdrawingsandhydraulic schematicsPreparequotationsandtechnical specificationsCarryoutengineering calculationsSelectandsizecomponentstooptimisesystemperformanceand costResolveproblemsandimprovemanufacturabilityandserviceabilityof productsPreparetechnicalspecificationforsub- contractorsPrepare technical documents for work files such as, work instructions & risk assessments, mechanicalandelectricaldrawings,hydraulicschematics,technicalprocedures,andreportsSupporttechniciansandengineersduringtestingand commissioningControlworkaftercompletionandissuetheas-builtfinal documentsEnsurecompliancewithcustomer requirementsEnsurethatprojectfinancialtargetsare metReviewtheprojectKPIsfor debriefingAttendsiteorworkshopwhen requiredSupportinginallareasofworkwhere appropriateEmbraceandsupportcompany valuesCandidate Requirements:2:1Bachelordegreeorequivalentin mechanical engineeringMinimum 3 years experienceAbilitytocarryoutengineering calculationsKnowledgeofhydraulic,mechanical,andelectrical/control systemTimemanagementskillstohandlemulti- taskingUnderstandingofmanufacturingprocessesandconstruction methodsGoodknowledgeofcomputerassisteddesign(CAD)softwareAutodeskInventor preferredInterestinworkingbothinadeskandworkshop environmentCreativeapproachforgeneratingnew ideasStrongbackgroundinmathand scienceClearcommunicatorbothwrittenand verbalSkilledinMicrosoftOfficepackagesincludingExceland WordEligibletoworkpermanentlyinthe UK.Fulldriving licenseKPIs:Ontime,specificationandinbudgetdeliveryofownprojectsatall timeEnsurecomplianceofdesignstocustomerspecificationandstandardsatall timePreparationoftendersandquotationsontimewithatleast10%conversion rate.If you feel that you have the relative skills/attributes to fulfil this role then please apply now!The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.TPBN1_UKTJ

Shift Maintenance EngineerLocation: Sunderland (Critical Facility)Salary: £46,500 per annum + HV Training + BenefitsShift Pattern: 2 Days / 2 Nights / 4 Off (12-hour shifts)We are currently recruiting for an Shift Electrical Engineer to join a leading FM / service provider at a major critical facility in the Sunderland area.This is an excellent opportunity for a skilled maintenance engineer to step into a high-performance environment, working as part of a structured on-site engineering team responsible for the maintenance and reliability of essential building services.The RoleAs a Shift Maintenance Engineer, you will be responsible for carrying out both planned and reactive maintenance across a range of electrical & mechanical and building services systems within a critical environment.Key responsibilities include:Carrying out planned preventative maintenance (PPM) tasksResponding to reactive breakdowns and fault findingDiagnosing and repairing electrical systems and equipmentSupporting the smooth operation of building services infrastructureEnsuring all work is completed in line with health & safety and compliance standardsWorking effectively as part of a shift team to maintain site continuityCompleting accurate maintenance records and documentationCandidate RequirementsWe are looking for electrically biased maintenance engineers with strong building services experience, ideally including:M&E maintenance experience within commercial or industrial environmentsStrong PPM and reactive maintenance backgroundConfident fault-finding and diagnostic skillsGood understanding of building services systems (power, lighting, distribution, etc.)Willingness to work within a critical environmentFlexibility to work a rotating day and night shift patternStrong teamworking and communication skillsExperience within critical environments is beneficial but not essential, as full training will be provided.Package & Benefits£46,500 per annum basic salary2 days / 2 nights / 4 off shift pattern (12-hour shifts)Fully funded HV training and development opportunitiesOngoing technical training and career progressionLong-term stability within a major FM providerStructured shift team environmentExposure to a critical, high-specification facilityOverviewThis is a fantastic opportunity for an experienced Electrical Maintenance Engineer looking to develop their career within a critical environment. The role offers excellent training, long-term progression, and the chance to work within a highly supportive engineering team on a key site.If you are interested, please apply or if you have any questions, Please reach out to Jamie Simmons at the Invictus Group.TPBN1_UKTJ

The Rewards and Benefits on Offer:Immediate start availableCompetitive salary and benefits packageCollaborative and supportive work environmentFree onsite parkingFuel/travel coverGenerous holiday allowanceMTrecs New Opportunity:MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Controls Engineer to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer.The Job Youll Do:Design, develop and commission control systemsDevelop PLC, HMI and SCADA softwareConfigure and integrate multifunction meters, protection relays, PLCs, HMIs, gateways and communications devices.Produce and review I/O schedules, control philosophies, cause and effect documents, and functional design documentation.Interpret electrical schematics, diagrams and layouts.Support the integration of systems using protocols such as Modbus RTU/TCP, Profinet, Profibus, Ethernet/IP and BACnet.Carry out software testing, internal FAT, client FAT and support SAT/commissioning activities.Troubleshoot control system issues during design, manufacture, test and commissioning.Work with electrical design and production teams to ensure controls equipment is correctly specified, installed and wired.Maintain accurate software records, backups, revision control and project documentation.Provide technical support to clients, site teams and internal departments where required.Occasionally travel to client sites for commissioning, fault finding and project support.About You:HNC/HND or degree in Electrical, Electronic, Control Systems or Automation Engineering, or equivalent industry experience.Experience in a Controls Engineer, PLC Engineer, Automation Engineer or similar role.Strong electrical understandingExperience with at least one major PLC platform, such as Siemens TIA Portal, Rockwell Studio 5000, Schneider or Mitsubishi based systems.Experience developing HMI or SCADA systems.Ability to read and understand electrical schematics, control circuits and panel wiring diagrams.Familiarity with industrial communications protocolsPractical troubleshooting skills and a hands-on approach.Good communication skills and the ability to work with design, production, test and site teamsTPBN1_UKTJ

Rewards and Benefits on Offer; Stable growing organisation. Immediate start available Dayshift Early Friday finish The opportunity to work with a well-established and rapidly growing North East manufacturing company. Career development and progression opportunities. MTrec’s New Opportunity; MTrec Technical are proudly representing our prestigious manufacturing client, based just outside Newcastle, with their plans for growth and expansion, by recruiting a Mechanical Design Engineer to join their team. You will be joining a fast-paced, dynamic company, with an excellent team-based culture and huge opportunities to progress your career. Our client is a well-established player in their specialist sector in the North East and supplies its quality products and services nationally. You will be joining an exciting and rapidly expanding business, where you will enjoy a varied working environment, a great team culture and an excellent new career move. The Job You’ll Do; Responsible for designing mechanical components and systems using SolidWorks. Processing engineering changes (ECR’s) and Bill of material updates (BOM). Supporting technical validations of designs with the wider engineering team. Introducing product improvements R&D to drive innovations and product improvements. Design, develop and maintain 3D models and modifications to existing. designs to keep in line with current legislation, continuous improvement, and cost reduction exercises. Support New Product Introduction and Engineering Change Management. Apply DFM techniques and support manufacturing products. Ensuring completion of final design documentation. Manage CAD data within the SolidWorks environment. Collaborate with other manufacturing support functions such as Quality, Production, Procurement and Product support. About You; Bachelor’s degree or equivalent in Mechanical Engineering. Minimum of 3+ years’ experience as a Mechanical engineer. PC literate and at ease with MS Office products. Experience of 3D design (SolidWorks) Experience of material selection for mechanical structures. Experience of drawings including revisions and numbering systems. Experience of using DFM and Lean Manufacturing. Experience with FEA analysis (steel). Experience of working with electrical power and drive systems. Experience of designing hydraulic systems. Ability to read and understand hydraulic schematics. Basic level of electrical distribution and electrical system design knowledge. Ability to work in a fast-paced environment

Job Title: Electrical Maintenance Engineer Location: Gateshead Salary: £50,000 (inclusive of shift allowance) Benefits: Permanent employment from day one Continental shift pattern – 4on 4off Ongoing training and development Opportunity to work on large-scale industrial automation projects Career progression within a growing engineering business The Company: Our client is a well-established engineering services provider that delivers maintenance solutions to major manufacturing businesses across the UK. Due to continued growth and the award of a significant long-term project, they are looking to appoint experienced Electrical Maintenance Engineers to join their expanding engineering team. This is an exciting opportunity to work on technically advanced automated equipment while becoming part of a business that values long-term employment, investment in its people and high engineering standards. Benefits: Secure permanent position Long-term project pipeline Modern automated manufacturing environment Supportive engineering team Opportunity to develop automation expertise Stable employer with future project opportunities Job Description: As an Electrical Maintenance Engineer, you will join a specialist engineering team responsible for supporting a major manufacturing facility. The Electrical Maintenance Engineer will carry out planned and reactive maintenance, fault finding and repair activities on automated production equipment, ensuring machinery remains safe, reliable and operational. Working within a fast-paced industrial environment, the Electrical Maintenance Engineer will support continuous improvement initiatives, preventative maintenance programmes and equipment reliability. This Electrical Maintenance Engineer role offers excellent long-term stability through a five-year customer contract, with future opportunities across additional engineering projects. Skills & Experience: Time-served Electrical Apprentice HNC (or higher) preferred Strong electrical maintenance experience Background in automation or automated manufacturing Knowledge of PLC-controlled machinery and industrial drives Experience fault finding on electrical systems Ability to read electrical drawings and schematics Manufacturing, industrial or process industry experience Strong communication and problem-solving skills Why Should You Apply? This Electrical Maintenance Engineer opportunity offers far more than just another maintenance role. You’ll be joining a growing engineering business with a secured long-term contract, working on modern automated equipment within a technically challenging environment. If you’re looking for stability, career development and the chance to work on exciting industrial projects, this Electrical Maintenance Engineer position is well worth considering

Electrical Design Engineer 3-month initial contract - outside IR35 Sunderland - On-site Are you an Electrical Design Engineer with experience designing fire alarm and detection systems? Do you have a strong AutoCAD background and experience working on large industrial projects? If so, please read on... Essential skillset: Electrical design experience with fire alarm and detection systems Strong AutoCAD experience (Revit/BIM knowledge advantageous) Good understanding of BS 5839 and UK fire safety regulations Experience producing electrical schematics, layouts and installation drawings Ability to carry out on-site surveys and design verification Experience coordinating designs with multidisciplinary engineering teams Strong technical problem-solving skills and attention to detail Experience participating in client design reviews and resolving technical queries Ability to produce project documentation including specifications, reports and design deliverablesDesirable experience: Previous experience on large industrial or manufacturing projects BIM coordination and digital design workflows Knowledge of wider British Standards and fire engineering principles Experience supporting system testing, validation and commissioning activities

MULTI-SKILLED MAINTENANCE ENGINEER SUNDERLAND 2 SHIFT (MONDAY-THURSDAY) - 07:00-19:00/19:00-07:00 ROTATING £47,000-£53,000 We are looking for a motivated engineer to join a market leading manfacturing company within the FMCG industry. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description - Multi-Skilled Maintenance - Electrical Bias - Hydraulics & Pneumatics - Continuous Improvement Work - PLC Controlled Machinery - Siemens S7 & Allen Bradley - Planned & Reactive Maintenance - Robotic Systems - Kuka & Fanuc - Bottling, Filling, Canning, Seaming & Labelling Lines Skills and Qualifications - HND/HNC qualified - 3 Years+ FMCG Experience - 18th Edition - Desirable - Lean Manufacturing Experience - Desirable - C&G Inspection & Testing - Desirable - PLC quals - Massively Advantageous Background: Manufacturing/FMCG In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest please send your CV directly to Jordan Hindhaugh at or call for a confidential discussion on (phone number removed)

MTrecs new career opportunity \n Our client are specialists in their market sector, they have an outstanding opportunity for a Supplier Quality Engineer to join them on a permanent basis. \n The Job youll do \n\n • Conduct quality assessments and audits of suppliers to ensure compliance with company and industry standards.\n, • Evaluate new suppliers and conduct periodic audits of existing suppliers to assess performa...\n\n \n ZIPC1_UKTJ

Drainage Engineer \n\n • Depot located in Hebburn\n, • Full-time\n, • Competitive salary + Overtime\n, • On-call rota required\n, • To find out more call Beth on 07719 983 823 or email\n\n Looking for a hands-on role within the drainage and wastewater sector? We're recruiting a Drainage Engineer to join an established operational team delivering essential drainage, sewer maintenance and infrastructure support services. This is a pr... \n \n \n \n \n \n ZIPC1_UKTJ

Our client is a successful tech scale-up, a cash-generative SME currently at c.£10m turnover and c.80 staff, looking to double in size in the next five years under the guidance of its experienced, highly charismatic and driven owner, supported by a first-class senior leadership team including new CEO. We are looking to strengthen the companys Engineering capability, working closely with a world-class CTO who heads a high-performing technology function, by appointing a new Senior Backend Engineer.As Senior Backend Engineer, based at thecompany's North East headquarters, youll take hands-on technical ownership and leadership of one of our clients backend platform domains acting as the trusted technical authority, setting direction, defining standards and ensuring quality across Go and TypeScript services on AWS. This position is crucial for driving our engineering excellence and fostering a culture of continuous improvement.Your responsibilities as Senior Backend Engineer will include:Own technical direction for the backend platform architecture, coding standards, and how services are designed and evolvedBuild and evolve production-grade services in Go and TypeScript across AWS Lambda, ECS/EKS, and RDS/AuroraMake architectural decisions with clear reasoning, balancing delivery pace with long-term maintainabilityDrive quality through code review, testing culture, and engineering practicesMentor and coach backend engineers helping them grow their skills and careersCollaborate with Engineering Managers, Product and other platform Leads to align on shared standardsManage technical debt strategically and champion continuous improvementAs Senior Backend Engineer youll need:Strong technical, commercial experience as a Backend Engineer, Senior Backend Engineer or Lead Backend Engineer, ideally gained in a fast-paced, growing technology-driven business leading, setting standards and raising the bar for othersExperience in an agile, product-led environment is desirableProduction-grade experience in Go designed and shipped backend services at scaleExperience with TypeScript in a backend context (Node.js, shared libraries, or tooling)Deep familiarity with core AWS infrastructure Lambda, ECS/EKS and RDS/Aurora - specialised knowledge in Aurora performance tuning is a significant plusProficiency with AWS messaging services, specifically SQS, SNS and EventBridgeStrong communication skills across technical and non-technical audiencesRewards and Benefits:Basic salary between £65,000 and £80,000 (plus benefits)Maximum pay/rewards, dependent on all outlined experience, skills, knowledge and qualificationsFull-time, permanent role based in GatesheadHybrid and flexible working availableFree parkingOn-site health facilities, staff events and discounts, training and morePlease note: we review applications on receipt and aim to get back to shortlisted candidates within 5 days.You must be eligible to work in the UK.Senior Backend Engineer, Newcastle upon TyneTPBN1_UKTJ

I am working alongside a leading civil engineering contractor who are currently looking to hire an experienced Site Engineer due to a number of new contracts being awarded. My client operates across the civils sector on renewable energy projects. Site Engineer responsibilities: Setting out using total station & GPS. Works include earthworks, duct installations, troughs, and RC bases. Working alongside the project management team. Site supervision. Ensuring health and safety compliance. Ensuring works are being carried out in accordance to agreed methodology and method. Ensuring the correct documentation is held on site. Ensuring works are completed on time and to specification. Site Engineer requirements: Experience with setting out earthworks, duct installations, troughs, and RC bases. Right to work in the UK. CSCS card SSSTS/SMSTS ticket holder (preferable) Full UK driving licence. * Strong communication skills. The next steps to apply for the role: If you are interested click the apply button and send your CV

MTrec’s new career opportunity Our client are market leaders in their industry sector, they are looking to recruit a Quality Engineer on a permanent basis. The job you’ll do Primarily located in the client's Sunderland site, this role will involve supporting all New Model Quality Assurance activities across the site. You will be responsible for the development of parts & processes, creation of QA documentation and maintenance of associated QA systems to satisfy all APQP and client NPL requirements. This role will cover all aspects of Interiors assembly and component part manufacture. The person that is recruited for this role will make a significant contribution towards the improved performance of these products. This will involve working closely with NMUK, major suppliers & client project team members within the Interiors organisation. Manage QA responsibilities of New Model Launches. Provide a key customer liaison to communicate part development countermeasures (PDR) in agreed timescales. Support part development, through all aspects of the trial build process. Represent the QA department within new model project teams, working closely with other client functions, external toolmakers, Tier 2 suppliers and Customers. Ensure APQP/IATF16949 documentation and standards are maintained throughout the new model process. Co-ordinate new model metrology responsibilities, to ensure all inspection standard and key feature requirements are completed in line with APQP/Project Milestone expectations. Clear interpretation of requirements relating to technical drawing and standards. Support of continuous improvement activities such as kaizen and process audits. Coordinate the submission of supplied part APQP and part approval. Support the new launch related activities, such as SOP ramp up quality planning, Gate review Management, Quality Functional Reviews, etc. Support Quick Response Quality Circle activities in relation to internal and Customer quality issues. About You Ideally qualified to minimum of HNC level in an appropriate discipline or equivalent level of experience. English fluent, additional language is preferred. Ideally hold experience within a similar role, gained in a fast moving, automotive manufacturing environment. Self-motivated, proactive thinker and possess excellent communication, teamwork and organisational skills. Excellent understanding of all aspects of APQP management and the IATF systems and processes that support this. 5 years high volume manufacturing experience, preferably including Interior parts and associated assembly. Good IT Skills (Microsoft Applications). Excellent understanding of metrology, including CMM, gauge development and implementation in a production environment. Process auditing experience, ideally including an IATF/ISO auditor qualification. The Rewards and the benefits Superb benefits package, please ask for more details

Fire Damper Installer / Engineer Location: Sunderland (with travel to sites across the UK) Job Type: Temporary to Permanent Pay Rate: £18.00 - £19.00 per hour (DOE) Benefits Working away allowance Accommodation ("digs") paid when required Travel time paid Overtime available 20 days holiday plus Bank Holidays Permanent opportunity following successful temporary period Ongoing training and development About the Role Our client is a FIRAS-certified contractor specialising in Passive Fire Protection (PFP) services. Due to continued growth, they are seeking a Fire Damper Installer / Engineer to join their team on a temporary to permanent basis. Based in Sunderland, the successful candidate will travel to various client sites nationwide. Some projects will require working away from home, so flexibility is essential. Key Responsibilities Install, service and maintain fire dampers in line with industry regulations and company standards. Ensure correct assembly, alignment and secure installation within ductwork and ventilation systems. Carry out inspections, testing and routine maintenance. Diagnose faults and assist with repairs and component replacements. Complete service reports and compliance documentation accurately. Adhere to all health and safety procedures on-site. Requirements Full UK Driving Licence. Own transport essential. Strong mechanical aptitude and practical skills. Basic knowledge of fire damper systems, construction practices and site safety. Ability to follow technical instructions and drawings. Good communication and teamwork skills. Proactive and safety-focused approach. * Willingness to travel and work away when required. Salary £18.00 - £19.00 per hour depending on experience, plus working away allowance, paid accommodation, travel time and overtime opportunities. To apply, please submit your CV today

For over 20 years James Lewis Ltd has provided a wide variety of engineering services to the major Bus & Coach operators and manufacturers throughout the UK. We have varied projects with multiple clients throughout the UK and are looking for experienced & flexible engineers who are able to adapt to the diverse nature of our work. Job Types: Full-time Salary: £19.12-23.81 per hour Shift: 5 over 7 days rotating earlies and lates Benefits: Overtime Available Pension plan Free bus travel Duties to include: Undertaking Vehicle maintenance, servicing and running repairs on a varied fleet (including M.O.T preparation) Prompt Repair of all defective vehicles to the highest standard Ensure vehicles are maintained in accordance with the Company Operators Licence guidelines Ensure all repairs to company vehicles are carried out in a timely manner Have an ability to work to the highest Health & Safety standards Prep & Presentation for VOSA tests Preventative Maintenance Fault Diagnostics All associated paperwork, reports and admin Candidates must have a recognised qualification in PCV or HGV Engineering and ideally have +3 years of post-apprenticeship experience. Your own set of tools is essential, as is a valid driving licence. A PCV driving licence would be ideal but not essential. About us: James Lewis is the market leader in supplying contract and permanent workforce solutions to the Automotive, Transport and Heavy Power industries, we provide both white and blue-collar personnel throughout the UK working with FTSE 100 companies and SME’s. If you feel you have the right skills for the above position or you are a HGV Technician / HGV Engineer / HGV Mechanic / HGV Fitter / PCV Engineer / PSV Mechanic / Plant Engineer / Plant Technician / Plant Fitter / Diesel Technician / Diesel Mechanic / Diesel Fitter looking for a new position then please call

Fire & Security Engineer £35,000 - £42,000 OTE + Full Benefits Package Join a well-established and growing organisation delivering high-quality fire and security solutions across Sunderland. This is a field-based role centred around Sunderland, covering a regional patch, offering stability, strong earning potential, and a genuinely supportive environment. What's on Offer Competetive base salary up to 42,000 Regional coverage across Sunderland 33 days holiday Private Pension Specialist Tools Provided, Company Vehicle, IT Equipment Employee recognition programme The Role Service, maintain and install fire alarms, CCTV, intruder alarms and access control systems Deliver a high standard of customer service and build strong client relationships Manage your own workload across a regional patch Diagnose faults and carry out effective repairs Complete accurate service and compliance reports Identify system issues and recommend improvements Work to deadlines while maintaining quality standards Ensure full compliance with health & safety regulations Collaborate with internal teams to deliver efficient service Aim for first-time fixes wherever possible What We're Looking For Experience across both fire and security systems Relevant industry qualifications (FIA or equivalent advantageous) Strong fault-finding ability Comfortable with digital reporting systems Solid understanding of health & safety practices Good communication and customer-facing skills Self-motivated and organised approach Full UK driving licence INDAV

Dual Fuel Smart Meter Engineer for Ganymede Energy\n\nGanymede Energy are looking to grow our smart home workforce and are seeking safety-focused Dual Fuel engineers to become a part of our growing business.\n\nWith an industry leading operational support team combined with industry leading high-tech equipment, localised working regions, opportunities to upskill in the future to EV & PV so you can benefit from being an all-round smart home engineer, whilst working in partnership with our client who both share a clear and transparent vison as we move towards our goal of NET zero.\n\nWe believe we are offering a great work life balance solution, whilst still being able to earn one of the best salaries within the industry with long term job security.\n\nDual Fuel Engineer Overview:\n\nBasic Salary: £39,650\n\nBonus: £2,000 yearly bonus paid in December!\n\nExcellent work life balance: 40 hours per week, 8am – 4pm shifts + No Call Out!\n\nFood allowance card: £60 per month to buy your lunch on us! (£720 per year)\n\nHoliday: 31 days!\n\nEquipment: Brand New Van, Fuel Card, PPE, Tools, Equipment and Hand-Held Unit all provided \n\nAbout you\n\nMinimum Qualifications: CCN1/CMA1 & MET1 or Level 2 Smart Meter Diploma.\nYou must have a minimum of 6 months experience as a dual fuel meter installer.\nYou will need to have a passion for delivering good customer service.\nIf you are interested in joining a growing business at an exciting time, you can apply directly below or send your CV to (url removed) or call me on (phone number removed) for a full job description.\n\nGanymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

We are proud to be recruiting for a well-renowned FMCG Manufacturer for a Maintenance Engineer to provide electrical and mechanical support for the site. Maintenance Engineer Location - Sunderland Salary - up to £53k per annum Shift Pattern - Alternating Shifts (Candidates must be flexible to work both alternations): 3-Shift Rotation: 7:00am - 3:00pm 3:00pm - 11:00pm 11:00pm - 7:00am 2-Shift (Days & Nights): 7:00am - 7:00pm 7:00pm - 7:00amResponsibilities: Repair various manufacturing equipment used for the production of FMCG products Carry out PPM's and Reactive maintenance Attending to machinery breakdowns Fault finding equipment - electrical and mechanical machineryRequirements: Experience in a similar role such as (multi skilled maintenance engineer, shift engineer, shift technician, engineering technician, maintenance technician, or electrical maintenance engineer). Possess formal Engineering qualifications, such as an Level 3/NVQ/BTEC in Engineering Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers. Experience of using CMMS or EAM systems. Proven experience in driving through continuous improvement activities.Should this position be of interest, please apply or send an email to for more information

MTrecs new career opportunityOur client are market leaders in their industry sector, they are looking to recruit a Senior Quality Engineer on a permanent basis.The Job youll doThis Senior Quality Engineer role requires a self-motivated, proactive professional with exceptional communication and leadership capabilities.The position involves maintaining quality systems, standards, and excellent customer PPM performance across all interior trim moulding and assembly operations.In this Senior Quality Engineer capacity, you will work closely with major suppliers, major automotive customers, and internal project teams.As a Senior Quality Engineer, you will be instrumental in supporting all Interiors Quality Assurance activities across the manufacturing facilityYour responsibilities will encompass QRQC activity management, customer liaison, quality audits, calibration oversight, and continuous improvement initiatives, including kaizen and PHA activities.The Senior Quality Engineer will stand in for the Quality Assurance Manager when required and ensure APQP/TS16949 documentation and standards are maintained and adhered to across all operations.About YouMinimum HNC level qualification in an appropriate discipline or equivalent experience.5+ years in high-volume manufacturing, ideally CPM or injection moulding.Process auditing experience with IATF/ISO auditor qualification (preferred).Strong Microsoft Office skills and excellent teamwork abilities.The Rewards and the benefitsSuperb benefits package, please get in touch for more details.TPBN1_UKTJ

Lead Design Engineer An established engineering business is looking to recruit a Lead Design Engineer to take ownership of design deliverables across a range of complex mechanical handling projects. This role would suit someone with strong design experience looking for a next step up or someone senior who's keen for a new challenge. The Role Lead the design and development of equipment and systems from concept through to manufacture Oversee 3D models, technical drawings, and design documentation Coordinate design reviews and manage technical interfaces across projects Ensure all outputs meet industry standards, project specifications, and quality requirements Support and mentor Design Engineers within the team Carry out site visits and surveys when required Drive improvements around safety, DfMA, standardisation, and value engineering What They’re Looking For HNC, Degree or equivalent in Mechanical Engineering or related discipline Strong background in bulk material handling, conveyors or machinery Experience using Autodesk Inventor and PDM systems (or Similar) Good understanding of BS 8888 and manufacturing processes linked to heavy fabrication Confident leading projects and checking technical documentation Able to manage workloads across multiple projects and support junior engineers Benefits Salary circa £50k 25 days holiday plus bank holidays with option to buy more Hybrid working available (typically 2/3 split) 37-hour week with 1pm finish on Fridays Flexible benefits package Employee Assistance Programme Gym membership and cinema discounts Long service awards and employee recognition scheme Contribution towards eye tests and glasses * Regular company social events Please apply if this role is of interest and we will be in touch with more information

Project Engineer / Senior Field Service Engineer Overall Earnings £60,000 To £70,000 Basic Salary £50,000 To £60,000 Car (Hybrid of Electric) Or Car Allowance Bonus Circa 10% Overnight Payment £30 / £60 Overtime - Additional Hours Returned As Time Off in Lieu Holidays - 24 Days Rising to 31 Days Plus Bank Holidays Role involves travel with on average one night a week away from home The Role - Project Engineer / Senior Field Service Engineer You will be responsible for the following: Installation and commissioning of hardware, software and electrical components at customer sites Development of design documentation (including drawings) in accordance with customer requirements Configuration of application software, Windows operating system and associated PC hardware Co-ordinating with customers and sub-contractors to schedule project activities Your Background - Project Engineer / Senior Field Service Engineer To apply you should be able to demonstrate the following: Experience working in a field service engineer, commissioning engineer, control and instrumentation engineer or project engineer role Ex-forces engineers are welcomed to apply HNC or similar in relevant engineering discipline Excellent customer service skills Computer literate with a good working knowledge of Microsoft Office Full UK driving licence and willingness to travel and be DBS checked The Company - Project Engineer / Senior Field Service Engineer You will be joining a national team of engineers who take great pride in their work and who aim to build upon long term relationships with customers For those with the desire there are opportunities to progress your career into more technical specialist roles This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business

Mobile Multi-Skilled Engineer Mobile Role - Covering Gateshead, Durham, Darlington, and Stockton-on-Tees. Join CBRE Global Workplace Solutions CBRE is the world's leading real estate services company, delivering integrated facilities management solutions to some of the world's most recognised organisations. Due to continued growth, we're seeking a skilled Mobile Multi-Skilled Engineer (Electrical or Plumbing Bias) to join our team, providing maintenance support across a portfolio of commercial and industrial client sites. The Role As a Mobile Multi-Skilled Engineer, you'll be responsible for delivering planned and reactive maintenance across multiple sites, ensuring critical plant, equipment, and building services operate safely and efficiently. This is a hands-on role that combines electrical and mechanical expertise with excellent customer service and problem-solving skills. No two days are the same-you'll travel between client locations, carrying out maintenance, fault finding, repairs, and supporting site operations to minimise downtime and maintain compliance. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive maintenance on a variety of electrical and mechanical systems. Diagnose and repair faults on plant, machinery, and building services equipment. Maintain and troubleshoot three-phase electrical systems, motors, drives, inverters, and associated controls. Work on hydraulic, pneumatic, and mechanical systems including gearboxes, valves, and rotating equipment. Complete maintenance records and reports using CAFM systems and mobile technology. Ensure all work is completed in line with health and safety regulations and company procedures. Prepare and follow risk assessments, method statements, and permit-to-work documentation. Liaise with clients and site teams to provide first-class service and technical support. Support continuous improvement initiatives and identify opportunities to increase equipment reliability and performance. Participate in an on-call rota and work occasional overtime when required. What We're Looking For Essential Recognised apprenticeship or equivalent engineering qualification. Strong experience in a maintenance engineering environment. Electrical qualifications such as City & Guilds, NVQ, or equivalent. Proven multi-skilled engineering experience with both electrical and mechanical systems. Experience working with: Three-phase electrical systems Motors, drives, and inverters Hydraulic and pneumatic equipment Fault finding and diagnostics PLC fault-finding and basic diagnostics Ability to produce and work from risk assessments, method statements, and permit systems. Full UK driving licence. Desirable Working at Height certification. IPAF qualification. Authorised Person (AP) qualifications. Experience within manufacturing, industrial, or heavy engineering environments. What's In It For You? Competitive salary and overtime opportunities. Company van and fuel card. Mobile role covering a diverse portfolio of sites. Training and career development opportunities. Industry-leading benefits package. Opportunity to work for a global market leader in facilities management

We are seeking an experienced and commercially aware Associate/Senior Civil Engineer/Team Leader to lead and develop our Civil Engineering team. This is a senior leadership position combining technical excellence, team management and business development. we are looking for someone with knowledge in Sewerage Sector Guidance, Manual for Streets, Design Manual for Roads & Bridges, Local Authority Design Guidance and preparation of technical approvals you will also have a working understanding of technical software including AutoCAD, Causeway Flow, Causeway Live

CAD/CAM Engineer Gateshead Permanent staff position Four day working week, Mon to Thu Salary bracket: £40,000 – £46,000 a year 33 days’ holiday (inc bank holidays) A specialist manufacturing business in Gateshead is seeking an experienced CAD/CAM Engineer to join their engineering department. You primarily be responsible for developing manufacturing processes, creating CNC programs, and supporting NPI and lean activity across the company. Key Duties & Responsibilities Creating designs & CNC programs using CAD/CAM Producing 3D models & graphics, utilising software such as Rhino, Adobe Illustrator and SolidWorks Supporting new product introduction from concept through to production. Developing manufacturing methods, tooling requirements, and setup instructions. Driving continuous improvement activities focused on quality, productivity, and cost reduction. What You’ll Bring to the Team A recognised apprenticeship or equivalent qualification in a relevant engineering discipline Proven experience in a CAD/CAM or manufacturing Engineer role. Knowledge of SolidWorks and/or Rhinoceros 3D Experience generating CNC programs. * Familiarity with ISO 9001 standards. For more details, apply today or contact John Dorling at Pin Point Recruitment