Trabajos electrical engineer en LeedsCrear alertas

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes like Amazon Robotics and our Complex Item Sorter. • NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics, • 4 years UK certified apprenticeship, • Advanced proficiency in the local language verbally and in writing, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards, • Experience with robotic operation and maintenance, • Experience in condition-based monitoring, • Experience with predictive and preventative maintenance, repair, troubleshooting, and diagnostics on material handling equipment (MHE) and automated conveyor systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

We are looking for an experienced Electrical Testing Engineer to join Operations team in an established family-owned business in Leeds (LS11). Our client is a leading manufacturer and supplier of electrical power distribution equipment and pioneers of super low loss amorphous transformer technology. The Role: Reporting to the Senior Testing Engineer; key responsibilities will be the testing, repair ... ZIPC1_UKTJ

Senior Primary Electrical Design Engineer Up to £90,000 + Excellent Benefits Leeds, West Yorkshire \n The Role \n Are you an experienced Electrical Design Engineer ready to take the lead on complex EHV and HV substation projects? Looking for a role where your expertise will help shape the future of the UK's electricity network while offering genuine career progression? \n An exciting opportunity has arisen fo... \n \n \n \n ZIPC1_UKTJ

Vehicle Electrical Installation Engineer \n Gelderd Road, Leeds \n Full Time 40hrs, Permanent, Monday to Friday. \n Salary - Dependant On Experience \n About us \n Established in 2000 the company, an auto-electrical engineering company specializing in commercial vehicle safety systems has gone from strength to strength. Operating Nationwide dealing with some of the largest fleets in the country whilst providing optim... \n \n \n ZIPC1_UKTJ

Would you like to be part of Vital Energis Strategy of Growth?If so, were looking for a BMS Commissioning Engineer to join our specialist team where they will take direct responsibility for the day-to-day operation and maintenance of a number of Vital Energis plantrooms/ solar farms and boiler rooms.This role will involve traveling and working away from home so please only apply if you are willing to travel/ work away- Travel is UK wide.The CompanyVital Energi is a leading provider of renewable energy infrastructure and systems to the public and private sectors. We are supporting Hospitals, Universities, New Build developments, Towns and Cities as well as Industrial and Commercial clients to decarbonise their buildings.We have and continue to work on ground-breaking projects throughout the UK which are supporting the UKs Net Zero targets, such as the recently announced £1 billion low-carbon infrastructure project for Westminster.With plans to double our headcount over the coming years, supported by offices opening in new locations across the country and our strong investment pipeline, coupled with our expansion into new markets such as industrial power generation with our very own Energy-from-Waste facility, there is no better time to join the family here at Vital Energi.The Role-Develop detailed commissioning plans, risk assessments, and method statements.PLC ProgrammingIdentify, diagnose, and resolve commissioning issues, escalating where necessary.Collaborate with project teams, subcontractors, and clients throughout the commissioning process.Maintain compliance with health, safety, and environmental policies at all times.Traveling to and from different sitesContribute to process improvement initiatives within the commissioning department.Plan, manage, and carry out commissioning activities across solar farms, energy centres, and boiler housesQualifications & ExperienceHNC/HND or equivalent in Electrical, Mechanical, or Building Services Engineering.Proven experience in commissioning within the energy, utilities, or renewables sectors.Strong understanding of control systems, instrumentation, and electrical safety.Knowledge of/experience with Renewable Energy technologies such as Heat Pumps and Solar will be highly advantageousFull UK manual driving licenceThe Package:Salary negotiable DOECompany CarContributory Company Pension SchemeNon-contributory death-in-service insuranceEmployee Assistance Programme25 Days Holiday plus 8 days bank holidays.Additional holidays awarded in line with length of serviceOption to purchase/sell additional holidaysOnsite gym/wellbeing centre at our Blackburn Head OfficeDiscounted gym membership across the UKEV charging points where possibleApplications will be processed within 28 days of receipt. If you have not heard from us within this time period it will mean that your application has unfortunately been unsuccessful.The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital status, physical disability or is disadvantaged by unjustifiable conditions or requirements.Only applicants who are legally entitled to work in the UK and are currently resident in the UK are invited to apply.Notice to Agency and Search Firm Representatives:Vital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you.TPBN1_UKTJ

Electrical Engineer (Product Support) Leeds | £35,000 - £40,000 + 5% Bonus + Benefits Looking for a role where you can develop beyond pure design work and become the technical expert behind a market-leading electrical product range? We're looking for an Electrical Engineer (Product Support) to join a growing engineering team supporting the manufacture, testing and ongoing development of MV electrical products (mostly switchgear) used across critical infrastructure projects. This is an excellent opportunity for someone with a background in electrical design, manufacturing, product engineering or technical support who wants broader exposure across engineering, production and product development. What's In It For You? Structured training and mentoring from experienced engineers Hands-on exposure to manufacturing, testing and product engineering Direct collaboration with international engineering and R&D teams Clear progression opportunities as the team continues to grow Take ownership of your own product portfolio A varied role combining technical problem-solving, engineering and stakeholder engagement What You'll Be Doing Supporting production teams with technical issues and product queries Investigating engineering and testing challenges Reviewing drawings and technical documentation Working with engineering and R&D teams to implement product improvements Supporting new product introductions and engineering changes Coordinating technical activities across multiple teams and stakeholders What We're Looking For Degree qualified in Electrical Engineering, Power Systems or a related discipline 2-4 years' engineering experience Experience within manufacturing, design, product engineering or technical support Switchgear knowledge would be a bonus Ready for your next step? If you're looking for a role where you can broaden your technical expertise, work closely with experienced engineers and build towards becoming a product specialist, we'd love to hear from you. Apply now or contact CRG TEC for a confidential discussion

We are recruiting for an electrically bias Engineer, however the ideal candidate will be multi-skilled with exposure to PLC's and automated equipment. This is a full time permanent role working for a well established client in the Leeds LS9 area, the successful candidate will work rotational weekly shifts Monday to Friday. \n What's on offer - \n\n • Competitive salary up to £58,000 per annum\n, • 25 days holiday...\n\n \n \n \n \n ZIPC1_UKTJ

Salary from £53,486 + Up to 10% BonusPermanent, 40 Hours Per WeekBased at our offices in Thorpe Park, Leeds or Doxford Park, Sunderland \n Shaping safe, compliant designs that power our network \n As an Investment andDesign Coordinator at Northern Gas Networks (NGN), you will be at the heart of delivering safe, high-quality capital projects that support our network and customers. You will lead and coordinate the full design lifecycle, from early concept development and scoping through to final handover, taking technical ownership throughout the process. \n Acting as the technically responsible person, you will ensure that all designs are safe, compliant, cost-effective and aligned with regulatory requirements and NGN’s strategic objectives. You will also provide design assurance across the wider project lifecycle, working closely with internal teams and delivery partners to ensure design integrity is maintained from start to finish. \n This is a hands-on technical role, working across a range of disciplines including Mechanical, Electrical and Instrumentation, Pipelines, Cathodic Protection, Civil and Security. The role requires strong technical capability, supported by relevant qualifications, authorisations and experience within your specialist discipline. \n A full UK driving licence is essential. The role involves travel across NGN’s operational area, including major cities such as Newcastle, Sunderland, Leeds, York, Hull, and Bradford, as well as rural regions like North Yorkshire and Cumbria \n In this role you will \n\n • Deliver the full early project lifecycle from concept through to final design, maintaining technical involvement through to construction handover\n, • Develop clear, comprehensive scopes that fully capture project requirements and remove technical ambiguity\n, • Embed a strong Health & Safety culture by applying Safety by Design principles across all engineering solutions\n, • Lead and manage detailed design activities across projects, ensuring consistent and effective design contract management\n, • Provide robust technical challenge to ensure designs are constructable and aligned with business and operational needs\n, • Engage with the supply chain to support timely procurement of long-lead items and achievement of key project milestones\n, • Plan, coordinate and oversee all enabling works and specialist surveys required to support project delivery\n, • Collaborate with internal and external stakeholders to support business cases, coordinate delivery activities, and embed lessons learned for continuous improvement\n, • Be responsible for business case production, CBA analysis and justification to the Investment Steering Group\n\n We are looking for \n\n • Gas Safety Passport and a relevant engineering qualification (HNC through to degree level or equivalent)\n, • Strong knowledge of CDM regulations, health, safety and environmental legislation\n, • Sound understanding of the gas distribution network or experience within a similarly regulated utility environment\n, • Proven experience delivering technically robust, compliant designs within a regulated industry\n, • Experience managing work across a portfolio of projects, coordinating multiple activities and priorities\n, • Demonstrated capability in contracting strategies and procurement across the full project lifecycle\n, • Strong stakeholder engagement skills, with the ability to collaborate effectively and remove delivery blockers\n, • Competent in leading detailed design for CAPEX projects, applying Safety by Design principles and assuring programme deliverables\n\n Desirable - Membership of a recognised engineering body such as IGEM or IET, working towards Incorporated or Chartered Engineer status \n You don’t need to tick every box above to apply. If this role sounds like a good fit and you bring relevant experience, we encourage you to put yourself forward. \n Why join NGN? \n\n • Salary from £53,486 per annum\n, • Annual bonus of up to 10% recognising your contribution and performance\n, • 25 days of annual leave, plus recognised bank holidays and 2 additional half-days over the Christmas period\n, • Occupational sick pay available after the first 2 calendar days of statutory sick pay\n, • Generous stakeholder pension scheme, doubling your contribution, up to 10%\n, • Flexible benefits and salary sacrifice options, including discounts on UK attractions, gym memberships, restaurants, experience days, plus access to a virtual GP service\n, • Family-friendly policies, including up to 6 weeks of paternity leave and 6 months of full pay for maternity leave (for eligible employees), plus shared parental leave and more\n\n About NGN \n We deliver gas to 2.9 million homes and businesses across the North East, Northern Cumbria, and much of Yorkshire, through a network of over 37,000km of underground pipes. Serving both major cities and rural communities, we are committed to safety, reliability, and innovation. Our values – Trailblazing, Empowered, Heartfelt, Community Focused, Intellectually Curious, and Happy, shape everything we do. We are proud to champion equality, diversity, and inclusion, and actively support initiatives alongside our Colleague Communities (LGBTQ/Women’s/RootsandResonance/Parents & Carers/ DisABILITY) to ensure we reflect and uplift the communities we serve. \n Next Steps – Simply click ‘Apply’ and upload your CV, making sure to highlight how your skills and experience align with the role. We aim to contact all applicants within one week of the closing date, with interviews expected to take place at the beginning of August. If you require any adjustments during the recruitment process, please contact our Recruitment Team at

Associate Director, Office Lead - Building ServicesLocation: LeedsSalary: Up to £85,000 + Comprehensive Benefits PackageOur client, a leading multidisciplinary engineering consultancy, is looking to appoint an experienced Building Services Office Lead to establish, develop and grow its Building Services capability in Leeds and across the wider Yorkshire region. This is a rare opportunity to take on a strategic leadership role within a highly respected consultancy, helping to shape a regional team while delivering high-profile projects across multiple sectors. \n The Opportunity \n This role will suit an ambitious and commercially minded Building Services professional who is passionate about technical excellence, team development and business growth. Working within an established multidisciplinary environment, you will play a key role in expanding the regional Building Services offering, developing client relationships and leading the delivery of innovative engineering solutions. Projects span a diverse range of sectors including: \n\n • Commercial\n, • Education\n, • Defence\n, • Energy\n, • Healthcare\n, • Advanced Manufacturing\n, • Transport\n, • Local Government\n\n Key Responsibilities \n\n • Provide strategic leadership to establish and grow the Building Services team within the Leeds and Yorkshire market.\n, • Support recruitment, mentoring and development of technical staff.\n, • Build and maintain strong client relationships while identifying new business opportunities.\n, • Lead and coordinate MEP engineering input throughout all project stages.\n, • Take ownership of project delivery, including technical quality, programme management, commercial performance and client satisfaction.\n, • Drive technical excellence across mechanical, electrical and public health engineering disciplines.\n, • Contribute to bids, fee proposals and business development activities.\n, • Champion sustainable, low-carbon and energy-efficient design solutions.\n, • Help shape team culture, workload strategy and long-term regional growth plans.\n\n Requirements \n We are keen to speak with candidates who can demonstrate: \n\n • Degree qualification in Building Services, Mechanical or Electrical Engineering (or similar).\n, • Chartered Engineer status.\n, • A proven track record of leading Building Services projects and developing client relationships.\n, • Strong technical expertise across mechanical, electrical and/or public health engineering.\n, • Experience managing multidisciplinary design teams and coordinating project delivery.\n, • Commercial awareness with experience preparing successful bids and fee proposals.\n, • Excellent leadership, communication and stakeholder management skills.\n, • Knowledge of BIM and digital design tools such as Revit and Navisworks.\n, • A strong understanding of UK Building Services regulations, sustainability standards and industry best practice.\n\n What's On Offer \n\n • Opportunity to build and lead a regional Building Services team.\n, • High level of autonomy and influence within a growing business.\n, • Exposure to nationally significant multidisciplinary projects.\n, • Competitive salary and flexible benefits package.\n, • Hybrid working arrangements.\n, • Structured training and professional development opportunities.\n, • Excellent long-term career progression prospects.\n\n If you're an experienced Associate Director, Building Services Manager or Regional Lead looking to take ownership of a growing Leeds-based team, we'd be delighted to discuss this opportunity in confidence.What you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. \n Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Annual salary: up to £39,595.28 \n Gas Engineer \n Location: Scarborough/York/Northeast \n Salary: Up to £39,595.28 per annum plus company vehicle and fuel card \n Contract Type: Full time – Permanent, 42.5 hrs per week, Monday to Friday plus 24 hour callout commitment. Potential earnings 50K+ \n About the Role: \n We’re looking for a skilled and safety-conscious Gas Engineer to join our team in the North east , delivering high-quality gas servicing, repairs, and installations across our clients’ housing stock. Your role will be vital in ensuring that all gas appliances and systems are safe, compliant, and fit for continued use. \n You’ll carry out a range of domestic gas works including boiler diagnostics, repairs and servicing. Accuracy, attention to detail, and a commitment to safety are essential, as your work directly impacts the wellbeing of residents, staff, and the wider public. You’ll be expected to work independently and as part of a team, maintaining high standards of customer service and compliance at all times. \n Key Responsibilities: \n\n • Carry out servicing, repairs, and installations of domestic gas appliances including boilers, cookers, and fires\n, • Diagnose faults and complete remedial works efficiently and safely\n, • Perform landlord gas safety inspections and issue certificates (CP12s)\n, • Ensure all work complies with current gas regulations and internal procedures\n, • Respond to emergency call-outs and urgent repairs when required\n, • Record all work completed using handheld devices or job management systems\n, • Liaise with tenants, housing officers, and internal teams to ensure clear communication\n, • Maintain van stock levels and order materials as needed\n, • Identify and report any safeguarding concerns or property hazards\n, • Work collaboratively with other trades to complete multi-skill jobs\n, • Participate in toolbox talks, training sessions, and safety briefings\n, • Ensure PPE is worn and health & safety procedures are followed at all times\n, • Support apprentices or junior engineers when required\n\n Key Criteria \n\n • Qualified to City & Guilds or NVQ Level 3 in Gas Installation and Maintenance\n, • Hold valid ACS certification (e.g. CCN1, CENWAT, CKR1, HTR1)\n, • Experience in domestic boiler servicing, fault diagnosis, and installation\n, • Good understanding of electrical safe isolation and basic wiring principles\n, • Knowledge of current gas safety legislation and compliance standards\n, • Experience working in social housing or local authority environments (preferred)\n, • Excellent communication skills with a customer-focused approach\n, • Ability to work independently and as part of a team\n, • Comfortable using handheld devices or digital job management systems\n, • Strong attention to detail and commitment to safe working practices\n, • Flexible and willing to travel across properties and attend out-of-hours callouts\n, • Full UK driving licence\n\n Benefits we can offer you: \n\n • 25 days annual leave plus bank holidays\n, • Annual Mears Fun Day - Our annual Fun Day is organised as a massive thank you from the Executive team for all the hard work!\n, • Volunteering Leave - Mears supports employees to undertake paid volunteering in the community, in support of our social value commitment.\n, • Staff perks with Mears Rewards - discounts of up to 10% weekly groceries, holidays, eye test vouchers, Share save scheme, plus much more\n, • Family friendly policies\n, • Company Vehicle and Fuel Card\n, • Access to EAP Counselling sessions\n\n All our roles require candidates to have the entitlement to work within the UK, Mears does not currently offer visa sponsorship. \n To drive a Mears vehicle, you must be aged over 21 have held your licence over 3 months and have less than 9 points. \n Candidates should be aware that all our roles are subject to relevant Background, Identity & Security checks before commencement of employment. \n Apply below or to discuss your application further; contact: Francesca Swan () \n If you need any help with your application process, we are here to support you. We will be accessible every step of the way. \n At Mears Group, we are committed to fostering a diverse and inclusive environment where everyone can thrive, we are a Disability Confident employer, valuing individuality and ensuring equal opportunities for all. \n We proudly support the Armed Forces Covenant and are honoured to have achieved the Gold Award in the Defence Employer Recognition Scheme (ERS) to coincide with this, we hold an Endorser Award for the Career Transition Partnership, recognising our commitment to veterans transitioning into civilian careers. \n In our continued effort to promote social mobility, we invite applicants to voluntarily share their background information during the application stages to help us better understand the diverse experiences of our candidates. This is to ensure we are committed to improving social mobility. We use the Social Mobility Index to assess and enhance opportunities for individuals from diverse backgrounds. These questions are optional and will not impact your ability to apply.

Job ContextBigChange is at an inflection point. As a pioneer of AI-powered field service software now serving over 250,000 users worldwide, we're not done making big change. We've just launched BigChange Lightning — an AI intelligence layer that deploys autonomous agents across field service operations — and we need a Senior Director of Engineering to lead the teams building what comes next.Headquartered in Leeds and part of the global Simpro Group — one of the largest field service software networks in the world — BigChange has been transforming how trades and field service businesses operate since 2013. Our platform connects jobs, people, and performance across plumbing, HVAC, fire & security, facilities management, electrical contracting, and more.Trusted by over 2,200 high-growth businesses, we've processed billions in invoiced work and scheduled tens of millions of jobs. We've featured multiple times on the Sunday Times Tech Track 100, and we're just getting started with AI.BigChange Lightning represents the next chapter: AI agents that act as virtual business partners, trainers, documentation specialists, and customer success functions — delivering the headcount the economics never previously supported.The RoleThis is a senior in-person leadership position based at our Leeds HQ. You'll lead the engineering organisation responsible for BigChange's full product suite — from the legacy monolith to our rapidly evolving microservices platform and mobile applications — while embedding an AI-First engineering culture that makes every engineer more capable, every delivery faster, and every customer outcome stronger.You will report to executive leadership and be a key voice in shaping the technical future of one of the UK's most recognised field service technology businesses.Location: Leeds (LS15), on-site.What You’ll DoTeam LeadershipBuild, mentor, and inspire high-performing engineering teams. Drive a culture of ownership, craft, and continuous improvement from squad level to organisational level. Develop engineering managers and create clear career pathways for individual contributors and leaders alike.AI-First CultureChampion the integration of AI into every layer of how we build — from developer tooling and CI/CD intelligence to the AI agents at the heart of BigChange Lightning. This isn't about adopting tools; it's about fundamentally changing how engineers work and what they can achieve.Engineering StrategyPartner with Product and the C-suite to shape the technical roadmap. Balance velocity on new capabilities with architectural health across a hybrid legacy and modern stack. Translate business goals into clear engineering priorities.Platform EvolutionOversee the continued migration from AWS EC2 monolith toward AWS EKS microservices. Make the architectural decisions that protect reliability and security while enabling rapid innovation and scale.Delivery ExcellenceOwn engineering velocity, quality, and predictability. Build the processes and metrics that let teams move fast without creating tomorrow's technical debt. Hold the bar on engineering standards without becoming a bottleneck.Hiring & TalentAttract and retain exceptional engineering talent in Leeds and beyond. Make BigChange the kind of engineering organisation that people choose over the obvious alternatives. Be the reason great engineers want to stay.What You’ll BringProven track record leading high-performing engineering teams at scale — you've built, grown, and developed engineering organisations, not just managed them.Genuine conviction about AI in engineering — you've moved teams beyond AI as a curiosity to AI as a core capability multiplier.Strategic technical depth - you can engage credibly with senior engineers on architecture without needing to be the smartest technologist in the room.Experience with SaaS product companies you understand how engineering decisions compound into product and commercial outcomes.Comfort with complexity — you've navigated hybrid environments combining legacy systems and modern platforms, and you've made that transition well.Strong presence and communication — you lead in person, you build trust quickly, and you make hard decisions with clarity.Collaborative by default — you partner well with Product, Commercial, and the wider leadership team to create alignment, not just agreements.Located in or able to commute to Leeds — this is an on-site leadership role.What We Can Offer YouA generous annual leave entitlement plus a personal leave entitlementPrivate Health InsuranceEmployee Assistance Programme (24/7 confidential support on relationships, bereavement, finances)Life InsuranceCompany pension scheme, with an uncapped 5% employer contributionGenerous Parental Leave ProgramPaid Volunteer Leave DaysPublic Holiday Exchange SchemeTalent Referral Programme – get rewarded for referring a friend to join our team!Cyclescheme, a salary sacrifice to treat yourself to a bike & equipmentHome & Tech Scheme, a salary sacrifice to treat yourself to some new techA discounts and cash back schemeCasual dress and relaxed office environmentOpportunities for career progression and developmentDiverse training & internal networking opportunities across all of our product linesService recognition awardsClick here to find out more about working at Simpro Group!Our Core ValuesWe Are One TeamWe Are Customer CentricWe Are Growth MindedWe Are AccountableWe Celebrate SuccessSimpro, AroFlo, BigChange & ClockShark are equal opportunity employers with a best-of-class onboarding program and supportive team environments. This means that we want everyone to feel welcome and offer equal opportunities for everyone, regardless of age, disability, gender reassignment, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex or sexual orientation, or any other non-performance factor.If you'd like to join a fun and progressive organisation, where there are opportunities to develop your career, please apply now with your CV/Resumer.Please note: no agencies will be accepted in the recruitment of this role. Any CVs provided to Simpro Software by agencies will be treated as a gift. #J-18808-Ljbffr

Senior EHV / HV Substation Engineer –Up to £90,000 + Excellent Benefits– Leeds, West Yorkshire The Role Are you an experienced engineer who enjoys leading complex EHV/HV substation projects from concept through to commissioning? Would you like to work on major renewable energy, battery storage and transmission projects that are helping shape the UK's energy future? If so, this opportunity could be exactly what you're looking for. As a Senior EHV / HV Substation Engineer, you'll join Primary Power Consulting, a growing specialist consultancy delivering high-profile projects across the UK energy sector. Working alongside highly experienced engineers, you'll provide technical leadership and coordinate the successful delivery of projects ranging from distribution networks through to transmission-connected infrastructure. Every day brings something different, with opportunities to work on renewable energy developments, battery energy storage systems (BESS), grid connections and new-build substations. This is an excellent opportunity to expand your technical expertise, share your knowledge with junior engineers and play a meaningful role in the UK's transition to a more sustainable energy network. If you're ready to take the next step in your career, apply today and help build the infrastructure powering the UK's future. Key Responsibilities: Lead the engineering and technical delivery of EHV/HV substation projects up to and including 132kV Produce and review detailed primary and secondary electrical designs Prepare engineering calculations, specifications, layouts, single-line diagrams and equipment schedules Coordinate multidisciplinary engineering activities across design and commissioning teams Attend client meetings, technical reviews and project workshops Support feasibility studies, FEED engineering and detailed design activities Provide technical guidance during bids and tender submissions Mentor junior engineers and encourage their professional development Ensure projects meet quality, safety, programme and contractual requirementsThe Company A UK-based team of electrical designers, project managers and engineers with a reputation for providing success, Primary Power are dedicated to delivering professional expertise for EHV, HV and LV schemes across a range of sectors. The Benefits Salary up to £90,000, depending on experience Annual bonus Car allowance Private health insurance Pension contribution Death in Service cover (3x salary) 33 days' annual leave, including bank holidays Hybrid and flexible working Chartership support and ongoing professional development Clear career progression into technical or leadership roles Friendly, collaborative working environment Overtime opportunities where applicableThe Person Extensive experience in EHV/HV substation engineering up to 132kV A degree, HNC or HND in Electrical Engineering or a related discipline Experience delivering projects for National Grid, DNOs, ICPs, renewable energy developers or engineering consultancies Strong knowledge of primary plant, transformers, switchgear, cables and associated systems Experience producing or reviewing detailed substation designs Excellent communication and client relationship skills The ability to coordinate multidisciplinary engineering teams A proactive approach and commitment to quality, safety and continuous improvement A full UK driving licence and the right to work in the UK

Principal Electrical Design Engineer Leeds Full-Time £40,000 - £50,000 + Benefits Overview My client is a well-established Building Services Consultancy, renowned for delivering high-quality mechanical and electrical design solutions across a diverse range of sectors throughout the UK. Due to continued growth, they are seeking a talented and experienced Principal Electrical Design Engineer to join their dynamic team in the Leeds office. This role offers an exciting opportunity to work on a variety of innovative projects, with a clear pathway towards achieving Chartered Engineer status. If you are passionate about electrical design and thrive in a collaborative environment, we would love to hear from you. Benefits Clear and structured support towards Chartered Engineer status A supportive and collaborative working environment Exposure to a varied and exciting project portfolio Excellent opportunities for career progression and professional development Competitive salary and benefits package Day-to-Day Responsibilities Designing and developing electrical systems for a variety of building projects Collaborating with multidisciplinary teams to ensure successful project delivery Conducting technical analysis and preparing detailed reports Attending meetings with clients and stakeholders to discuss project progress and requirements Ensuring compliance with current industry standards and regulations Supporting the delivery of sustainable and energy-efficient design solutions Key Responsibilities Produce electrical building services designs across a broad range of projects Oversee project delivery from concept through to completion Prepare technical drawings, specifications, and calculations Coordinate with clients, architects, contractors, and internal design teams Attend project and client meetings, providing technical expertise and leadership Ensure all designs comply with current regulations and best practices Support and mentor junior engineers where required Required Skills & Experience Minimum 3 years' experience within Electrical Building Services Engineering Degree qualified in Electrical Engineering or a related discipline Strong technical knowledge of building services design principles Proficiency in: Revit Dialux AutoCAD Bluebeam Excellent communication and teamwork skills Ambition to progress towards Chartered Engineer status Desirable Experience Experience within the following sectors would be advantageous: Education HealthcareHowever, candidates from all project backgrounds are encouraged to apply. If you are an experienced Electrical Design Engineer looking to take the next step in your career, we would love to hear from you. Apply today or get in touch for a confidential discussion

JLL empowers you to shape a brighter way. \n \n \nOur people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real e...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Refrigeration Engineer Leeds £42,000 per annum A well-established refrigeration and HVAC specialist delivering installation, service, and maintenance solutions across commercial and industrial environments throughout the North of England. Supporting customers across sectors including retail, hospitality, food production, healthcare, and manufacturing, this company has built a strong reputation for delivering reliable, energy-efficient refrigeration solutions backed by exceptional customer service and technical expertise. Key Responsibilities: Carry out planned preventative maintenance, servicing, and reactive repairs on commercial refrigeration systems Diagnose and rectify refrigeration, electrical, and mechanical faults across a range of customer sites Attend emergency breakdowns and ensure equipment is returned to service quickly and efficiently Complete service reports and maintenance documentation accurately using company systems Maintain excellent customer relationships while delivering a high standard of workmanship Ensure all work is completed in accordance with F-Gas regulations and health & safety standards Package: £42,000 per annum Company van Overtime opportunities Pension scheme 28 days annual leave including Bank Holidays Continuous technical and manufacturer training Career progression opportunities What You'll Need: Previous experience working as a Refrigeration Engineer within commercial refrigeration Strong fault-finding and diagnostic skills F-Gas Category 1 qualification Experience servicing, maintaining, and repairing commercial refrigeration equipment Full UK driving licence Excellent communication and customer-facing skills Ability to work independently and manage your own workload Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC | M&E are the #1 recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC | M&E is acting as an Employment Agency in relation to this vacancy

Job role: Maintenance Engineer £60,000 Basic + Overtime Monday - Friday Health Care Benefits Leading Holiday Allowances Further Qualifications / Training Plans This is an excellent opportunity to join a forward-thinking business where engineering is at the heart of operations. You'll work with industry leading manufacturing equipment, playing a key role in maximising plant performance and driving continuous improvement. Key Responsibilities As a Maintenance Engineer, you will be responsible for ensuring the reliability, efficiency, and performance of production equipment by: Carrying out planned preventative maintenance (PPM) across a wide range of automated manufacturing equipment, including conveyors, robotics, and automated production systems. Responding quickly to breakdowns, carrying out effective fault finding and diagnostics on both mechanical and electrical systems to minimise downtime. Maintaining, repairing, and improving all production machinery and process equipment to ensure maximum operational efficiency. Recording maintenance activities accurately and identifying follow-up work to support continuous equipment reliability. Working closely with production teams to troubleshoot machinery issues, support equipment changeovers and optimise machine performance. Identifying opportunities to improve equipment reliability, production output, quality, health & safety, and operational costs through continuous improvement initiatives. Supporting the installation, commissioning, and optimisation of new machinery and automation projects as the business continues to invest in its manufacturing capabilities. If you are interested in this Maintenance Engineer role, please submit an up-to-date CV through this advert or call the Eko Talent on (phone number removed). Maintenance Engineer / Multi Skilled Engineer / Shift Engineer / Mechanical Engineer / Service Engineer / Technician

Why Join? This is an opportunity to play a key role in ensuring product excellence within a technically demanding, precision-led manufacturing environment. You’ll work at the interface of Engineering, Assembly and Supply Chain — influencing quality performance and driving meaningful improvement. Location: Leeds, LS12 Some travel required (occasional overnight stays) Salary: £49,319 per annum (inclusive of shift allowance) Benefits: Up to £2200 bonus annually Health cash plan Competitive pension scheme 33 days annual leave Free onsite parking Working hours: Double day shift - 6am-2pm and 2pm-10pm rotating. Cubed Talent are proud to be partnering with a market-leading, design-to-order engineering manufacturer to recruit an experienced Quality Control Engineer. This is a pivotal role focused on ensuring machines leave the factory meeting the highest standards of quality, reliability and customer expectation. Acting as the voice of the customer during Factory PDI and Buy-Offs, you will play a key role in protecting product integrity while driving improvements across assembly, supplier quality and internal processes. If you’re a technically strong quality professional with a background in complex mechanical engineering and a passion for continuous improvement, this is an opportunity to make a visible impact. The Opportunity As Quality Control Engineer, you will work within the Assembly Inspection team to ensure final product quality prior to customer testing and sign-off. You’ll support the ongoing development of business processes and product quality by identifying improvement opportunities and helping implement effective change. This role combines hands-on inspection, root cause investigation and cross-functional collaboration — ensuring that quality is built into processes, not just inspected at the end. Key Responsibilities You will ensure final product quality prior to customer testing, acting as the voice of the customer during factory PDI and Buy-Offs, and promoting a culture where process owners take accountability for quality performance. You will drive problem-solving and continuous improvement initiatives, reducing the cost of poor quality, investigating non-conformances, and improving right-first-time performance across assembly and supplied parts. You will support supplier quality and complaint processes, assist Purchasing in developing supply chain capability, and contribute to PPAP and supplier performance management. Additionally, you will monitor and report on Quality KPIs, support internal audits of the Integrated Management System (ISO 9001 & 14001), and provide analysis to inform senior leadership decision-making. What You’ll Bring You'll have a minimum 5 years’ experience within a complex design-to-order engineering organisation, operating within a Quality-focused engineering role. Strong knowledge of root cause analysis and process control techniques, strong working knowledge of mechanical engineering principles and production techniques and experience diagnosing manufacturing faults and non-conformance issues are all important pre-requisites. Ideally you will hold HND (or equivalent) in Mechanical Engineering or related discipline and have formal Quality training (e.g., CQI / IRCA trained auditor) but experience will be considered without formal qualifications. Technical Knowledge & Expertise Working knowledge of ISO 9001 & ISO 14001 fundamentals Knowledge of machining, fabrication, welding, sand/die casting Understanding of SPC and Lean Manufacturing techniques Awareness of electrical and pneumatic systems Ability to read and interpret engineering drawings Not sure if this is the right fit? Give us a call on (phone number removed). We’d rather have a five-minute conversation than have you talk yourself out of a good opportunity

Associate Director - Electrical Building Services Leeds | Hybrid Working | Excellent Salary + Comprehensive Benefits Are you an experienced Electrical Building Services Engineer ready to step into a senior leadership role? Our client is an established, award winning Building Services consultancy with an outstanding reputation for delivering innovative, sustainable engineering solutions across a diverse range of sectors. As part of their continued growth in Leeds, they're looking to appoint an Associate Director to help lead project delivery, strengthen client relationships and support the growth of their regional team. The Role This is a fantastic opportunity to combine technical expertise with leadership and commercial influence. You'll lead the delivery of complex building services projects, act as a trusted advisor to clients, mentor engineers and play a key role in developing both the team and the business. What You'll Bring Degree qualified in Electrical or Building Services Engineering. Chartered Engineer (or working towards Chartership). Strong consultancy experience delivering electrical building services projects. Excellent client-facing, communication and project management skills. Proven ability to lead teams, manage multiple projects and mentor junior engineers. Experience with BIM/Revit and industry software including AMTECH, DIALux and Relux is advantageous. A proactive, commercially aware approach with a passion for delivering high-quality engineering solutions. What's on Offer Competitive salary and enhanced pension. Private healthcare and wellbeing support. Hybrid and flexible working. Electric vehicle salary sacrifice scheme. Structured training and leadership development. Clear career progression. Modern Leeds city-centre office. Relocation support and additional lifestyle benefits. Why Apply? This is more than just another consultancy role, it's an opportunity to shape a growing regional business, work on high profile projects and become part of a collaborative team that genuinely invests in its people. If you're looking for the next step in your Building Services career and want to make a real impact, I'd love to hear from you. Please call Mica on (phone number removed). Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Job Title: FM Maintenance Site EngineerLocation: Sherburn In Elmet, LS25Salary: £38,590 per annum + up to 4% annual bonus (£1,543)Hours: 40 hours per weekStandby: 1 in 3 weeks on-call rotaAre you an electrically-biased engineer looking to work on a large static site in a stable, long-term role?Bolt Technical are hiring a Facilities Maintenance Site Engineer to join their on-site engineering team, supporting planned and re-active maintenance. You'll play a key role in ensuring the ongoing operation and safety of key infrastructure across the siteKey Responsibilities:Carry out PPM (Planned Preventative Maintenance) and reactive maintenance across electrical systems and building services.Fault finding , testing, and electrical isolation in accordance with H&S regulations.Ensure compliance with all statutory testing and building regulations.Work as part of an on-call rota (1 in every 3 weeks).What Theyre Looking For:Electrically qualified Installs and maintenance16th or 17th Edition, 18th is desirable but no essentialExperience in a warehouse or distribution centre environment would be beneficial but is not essentialStrong experience with electrical systems in industrial, warehouse or distribution settings.Competent in electrical isolation procedures and fault diagnosis.Experience working to PPM schedules and service level agreements.A team player with a flexible, hands-on approach.What They Offer:Competitive salary of £38,590Annual bonus of up to 4% (£1,543)Overtime at x1.3 for unsociable hours 18:00-06:0040 hours per weekOpportunities to work on a stable, long-term contract with a supportive FM team.Interested? Apply now to join a business that values reliability, technical skill, and long-term development.Or get in touch to find out more.TPBN1_UKTJ

Junior Laser Engineer (Mechanical / Electrical / Hydraulic) *Global Leading OEM Formal Training & Development to become a hands-on Technical Expert* £33,500 package including Basic Salary + Bonus + Private Healthcare + Company Car + Outstanding OEM Training + Full Expense Package + Full Tooling & Equipment Supplied + Residential Training Course Leeds / Manchester / Sheffield Are you HNC/HND qualified or a graduate in an Engineering discipline with hands-on experience with tools and machinery, looking to start or take the next steps in your career with a leading global engineering company known for developing the next generation of engineers? This is an exciting opportunity to join a well-established, world-leading manufacturer of advanced engineering, recognised globally for its innovation across industries such as automotive, aerospace and electronics. On offer is the chance to join a globally recognised organisation with a supportive and collaborative environment, where you will receive extensive training to become a hands-on engineer and technical specialist on highly advanced equipment. Training will take place through dedicated training facilities, structured development programmes and mentorship from experienced technical specialists. Are you looking to join your genuine passion for engineering with a long-term career within a global organisation that will help you develop skills on industry-leading machinery and technology? The role: Hands-on training to learn and develop Routine planned maintenance of machine tools and associated equipment. Opportunity for an engineer to move into a first-time service roleThe person: A suitable engineering qualification, such as an apprenticeship/ NVQ level 3 training or previous experience in the engineering sector Basic understanding of mechanical/electrical/hydraulic systems Full UK driving licenseIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25947A Keywords: Field Service, Electrical, Hydraulic, HND, HNC, Electrical Engineering, OEM We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Solutions Tender Engineer for Data Centre Critical Power & Cooling Location: Leeds or Hatfield (Hybrid – minimum 2 days in office: Tuesday & Wednesday) Role Overview At Schneider Electric, we believe energy is a basic human right and are committed to delivering innovative, sustainable, and resilient solutions through our EcoStruxure™ platform. We are seeking a Solutions Tender Engineer to join our UK Solution Centre tendering team, supporting the growth of our data centre business in a rapidly evolving market driven by cloud, AI, and high-density computing. In this role, you will be responsible for developing high-quality, competitive technical and commercial proposals for integrated data centre infrastructure solutions. You will work across Schneider Electric’s portfolio, including UPS systems, power distribution, indoor and outdoor cooling, rack systems, environmental monitoring (DCIM), and modular/containerised solutions, contributing to projects from concept through to delivery. You will operate within Schneider’s Customer Project Process (CPP) and work cross-functionally with sales, global product and factory teams, engineering, and key subject matter experts (SME) (procurement, finance, legal, and contracts, etc.). This collaboration ensures solutions are technically compliant, commercially robust, and aligned with both customer requirements and internal governance. This is a key role supporting complex, high-value opportunities, offering exposure to cutting-edge technologies, including high-density environments, liquid cooling, and sustainable data centre solutions. About You: • Strong understanding of data centre infrastructure systems (power, cooling, and IT environment) • Ability to develop end-to-end integrated solutions • Strong commercial awareness, including cost modelling and margin considerations • Excellent written and verbal communication skills • Strong organisational and time management capability • Ability to work under pressure and manage tight deadlines • High attention to detail and accuracy • Awareness of energy efficiency and sustainability considerations (e.g. PUE, carbon impact) • Experience working in a matrix or global organisation (desirable) Your Qualifications & Experience • Degree (or equivalent) in Electrical Engineering, Mechanical Engineering, or related discipline • Proven experience in tendering, pre-sales, or application engineering within data centres or critical infrastructure • Experience working with multi-disciplinary infrastructure solutions • Knowledge of tendering processes and commercial frameworks Desirable: • Familiarity with data centre standards (e.g. Uptime Institute) • Experience with modular or prefabricated data centre solutions • Exposure to hyperscale, colocation, or enterprise environments What we offer you: Competitive salary & Bonus Scheme, 28 Days Annual Leave + Public Holidays, Pension Scheme, Employee Share Ownership Programme, Various Health & Wellbeing Support Options, Gym Flex, Open Talent Market (internal mobility opportunities + access to mentors & projects globally), Shopping & Dining Discounts, Learning Portal and much more. At Schneider Electric, Diversity & Inclusion is at the heart of our organisation, it's an integral part of our history, culture, and identity. We recognise that embracing diversity unlocks innovation and creativity and fosters collaboration. We want our employees to reflect the diversity of our communities and the customers we serve. As a result, our teams are stronger to drive the company's future. We are proudly participating in the Disability Confident Program offering support to people in the workplace who consider themselves living with a disability. Apply now: Please submit an online application to be considered for any position with us. You know about us, so let us learn about you! Apply today. #LI-WM1

Exciting opportunities available for Electrical Engineers with high voltage (HV) experience to work for the Distribution Network Operator (DNO) Northern Powergrid! The role is to manage HV distribution projects at various voltage levels, including 11kV and 132kV and could involve new connections, network extensions, reinforcements or major substation schemes. Responsible for projects from concept to completion, the HV Engineer will lead the design phase and on-site construction and installation works. Previous experience in the HV, T&D, power distribution or new connections sectors is preferred, either as a Project Engineer, Project Manager, Field Engineer or Design Engineer. However, applications will also be considered from people working in related sectors, with strong transferable project management skills. Applications are welcome from Design Engineers employed by an Independent Connections Provider (ICP), looking for a new challenge in the HV industry. Qualifications in Electrical Engineering are required and a driving licence is essential. This is an excellent opportunity for career development in the power engineering sector - apply to Andrew Snelgrove at Deploy

Are you an experienced Senior Electrical Building Services Design Engineer seeking a role that offers not only challenging projects but also excellent benefits and career opportunities? Join a well-renowned property and construction consultancy in their Leeds office, where innovation and excellence thrive across diverse sectors including Sports, residential, education, healthcare, and more. In this role, you will experience significant investment into your personal development as the company continues to grow. They are investing heavily in their people which fosters an excellent culture of career progression and growth. Key Responsibilities: ·Lead the electrical design aspects of building services projects across various sectors, ensuring technical excellence and innovation. ·Collaborate with multidisciplinary teams to integrate electrical systems into diverse building designs. ·Conduct feasibility studies, design calculations, and performance assessments to optimize system efficiency and sustainability. ·Develop detailed design drawings, specifications, and reports in compliance with industry standards and regulations. ·Oversee project delivery, managing budgets, schedules, and ensuring quality assurance throughout. Key experience: ·Degree qualified in Electrical Engineering or Building Services Engineering ·Chartered Engineer or working towards this. ·Extensive experience in designing and delivering electrical building services projects across various sectors. ·Proficiency in design software such as AutoCAD, Revit, Amtech, Dialux ·Strong knowledge of relevant regulations and codes, including CIBSE guidelines and UK building regulations. ·Excellent communication and leadership skills, with a proven track record of managing project teams and delivering projects successfully. Benefits: ·Highly competitive salary package with performance-based bonuses. ·Flexible/Hybrid working options ·Employer pension contribution of 6%. ·Private healthcare coverage. ·25 days of annual leave, plus bank holidays with option to buy/sell ·Salary sacrifice car scheme. ·A wide range of flexible benefits including dental ·Opportunities for professional development and career advancement. If you are ready to join a leading consultancy where your skills and expertise will be valued and rewarded, please apply now by sending your CV to Charlie Weeks at (url removed)

Trainee Site Manager (Electrical) Nationwide £40,000 - £45,000 + Company Van + Fuel Card + Accommodation Paid + Meal Allowance + Annual Pay Reviews + Fast-Track Progression to Site Manager This is an excellent opportunity for an Electrician to join a specialist contractor that will provide extensive training, to enable you to progress as a Site Manager Are you an Electrician or Electrical Engineer with strong construction or site experience, looking to progress into site management as part of a 12 month succession plan? This established design and build contractor specialises in healthcare construction projects across the UK. Working on hospital refurbishments, specialist imaging suites, MRI and CT scanner installations, and complex live-environment projects, they have delivered over 1,000 projects and built a strong reputation for quality, reliability, and repeat business. Following continued growth, they are now looking to recruit an Aspiring Site Manager to strengthen their delivery team. In this role, you will work closely with experienced Site Managers and Contracts Managers, gaining hands-on experience across a wide variety of healthcare construction projects. You will remain involved in electrical installation work while gradually taking responsibility for site coordination, subcontractor management, health and safety, client liaison, project documentation, and programme management. Full support, mentoring, and training will be provided throughout your development. With that, the ideal candidate will be electrically qualified, possess strong construction site experience, and have the ambition to progress into a Site Manager position within a specialist and growing contractor. This is a fantastic opportunity to join a close-knit business who are backed by a global corporation with high staff retention, excellent training, and a genuine long-term career pathway into site management. The Role: Working alongside experienced Site Managers on specialist healthcare projects Supporting the day-to-day management of subcontractors and site operations Remaining hands-on with electrical installation work on smaller projects Assisting with health and safety management and site documentation Coordinating deliveries, logistics, and labour requirements Attending client meetings and maintaining strong stakeholder relationships Working nationwide with accommodation provided The Person: 17th or 18th Edition Electrical Qualification Strong construction site experience Motivated to progress into Site Management Comfortable remaining hands-on while developing management skills Good organisation and communication skills Client-facing and professional approach Willing to work away nationwide Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Lewis Jones at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

My Client is recruiting for a Principal Electrical Engineer in the Water Sector Are you ready to take up a vital role in shaping some of our exciting projects? How about joining our talented team, where everyone has a voice, and together we face our clients' challenges head-on. It's a diverse and inclusive work environment where world-class talent knows no distinctions. We're passionate about what we do, but we don't take ourselves too seriously. Simply put, this a great place to be. So, when it comes to your life outside of work, ask us about our flexible and remote working policies designed to help you get the most out of life. Bring your skills to the mix as a Principal Electrical Engineer, you'll play a vital role in every aspect of electrical engineering on Transformational Programmes for critical UK infrastructure with opportunities to work on iconic engineering projects at home and abroad. We specialise in all aspects of electrical engineering, within multiple challenging and engaging sectors such as Water, Aviation, Defence, Energy, Cities & Development and Education. We continue to provide industry-leading engineering solutions right through the project lifecycle, with value added through client-side support as well as construction phases. If being a part of a team with a passion for this industry is for you then we would love to talk to you. We currently have opportunities in our Bristol, Surrey, Manchester, Leed, Glasgow and Derby offices (Other locations may be considered). Your Purpose Lead a team to undertake technical design work following relevant design standards and codes, and to high-quality levels. Prepare briefs, scopes of work, and input into bid proposals. Successfully manage time and budgets to key project milestones and programmes. Work closely with teams in the UK and overseas to deliver integrated design solutions. Adhere to quality assurance standards in design.What you can bring Chartered Electrical Engineer. Good Experience in the Water Industry Experience in leading design delivery, including multidisciplinary design. Sound knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD's, earthing and bonding and familiarity with current UK design standards, including industry specific standards and working practices. Proficiency in designing within appropriate digital analysis packages, following local and national guidance. E.g. electrical design software such as Trimble/Amtech

Field Service Engineer, Imaging Systems X-ray & CT Computed Tomography Leeds, Bradford, Harrogate, Wakefield, Dewsbury, Huddersfield and Halifax *Excellent opportunities for experienced Service Engineers from a range of electronics or electro-mechanical system backgrounds to join a market leading manufacturer of imaging systems Basic Salary £45,000 to £50,000 Company Car On Call Allowance Circa £3,000 Overtime £5,000 to £15,000 Full Product Training Pension Healthcare Phone, Laptop Holidays The Role – Field Service Engineer, Imaging Systems This market leader seeks to recruit a technically motivated and customer focused Field Service Engineer, responsible for the service, installation and breakdown repair of a wide range of sophisticated imaging systems. Your Background – Field Service Engineer, Imaging Systems To succeed in this exciting role you will have the following skills or epxerience: A competent background in a service or maintenance engineering capacity gained within any high value capital equipment environment Applications are encouraged from engineers with a broad range of backgrounds, including: - imaging / printing / pre-press - semi-conductor - manufacturing - maintenance / PLC - electronics / electro-mechanical - laboratory, medical, pharmaceutical, - ex forces engineers (medical and dental, weapons systems, radar, REME electronics) A qualification in engineering, electrical or electronics is essential Applicants are welcome from engineers from a broad base of sectors, as full and comprehensive product training will be provided The Company - Field Service Engineer, Imaging Systems Well respected supplier of sophisticated imaging systems Their commitment to investment in research and development is second to none in their industry, ensuring that they remain a market leader * At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business

Stairlift Engineer Stairlift Industry, Mobility Engineer, Stairlift Installation, Stairlift Repair Leeds, Yorkshire Basic salary: £32,000 - £36,000 Realistic OTE: £60,000+ Additional earnings: Inflated overtime rates, door-to-door travel pay, and commission Benefits: Private healthcare, pension scheme, 33 days holiday including bank holidays, flexible working hours - no call-out rota, full product training provided, genuine career progression opportunities, all travel expenses fully paid by the company Marmon Lift Recruitment is working with one of the UK's fastest-growing independent stairlift companies. Due to continued growth and increasing demand, they are looking for experienced Stairlift Engineers who want to maximise their earnings in a business with a constant flow of work. This is an opportunity for engineers who are motivated, reliable, and prepared to put in the hours to significantly increase their income. This role is based in Leeds and will involve regular travel across Scotland for installations, servicing, and repairs. All travel and accommodation costs are fully covered by the company. The majority of the role involves driving and attending customer sites throughout Yorkshire and Scotland, with no requirement to travel further south. Commutable from: Leeds, Bradford, York, Wakefield, Huddersfield, Dewsbury, Barnsley, Keighley, Bingley, Otley, Harrogate, Halifax, and surrounding areas. Responsibilities of a Stairlift Engineer Install, service and repair straight and curved stairlifts in customer homes Service and maintain stairlifts to manufacturer standards Travel regularly across Scotland to attend customer appointments Deliver excellent customer service Complete paperwork and maintain safety complianceThe Ideal Stairlift Engineer Candidate Minimum 2 years' stairlift engineering experience Strong mechanical and electrical fault-finding skills Knowledge of major stairlift manufacturers UK Driving Licence - comfortable with regular travel and driving CSCS / SSSTS is advantageousWhy Apply? Serious earning potential for hard-working engineers Consistent overtime and additional earning opportunities All travel expenses paid by the company Stable and growing company with long-term security & career growth potential. Flexible working without call-out disruptionApply to this Stairlift Engineer Position: For a confidential conversation, call (phone number removed) (Mon-Fri) Send your CV to: Marmon Lift Recruitment is passionate about understanding what matters most in your next move before any interview process begins. Our commitment is to represent your best interests and help secure the right long-term opportunity within the stairlift industry

Major Recruitment have an exciting and rare opportunity available for an experienced Electrical Bias Maintenance Engineer to join a well-established, long-standing packaging manufacturer based in Leeds. This is a fantastic opportunity for a skilled engineer with a strong electrical bias and proven experience within a manufacturing environment. About Our Client Our client is a highly respected UK manufacturer, operating from modern, state-of-the-art modern facilities. They specialise in delivering innovative, high-quality flexible packaging solutions, including printed packaging, bags, pouches, films, and laminated products for major UK and European brands across food, home, and consumer goods sectors. With a strong heritage and continued investment in technology and people, they remain at the forefront of their industry. Please note: sponsorship is not available for this position. Applicants must have the full right to work in the UK. What's in it for you Salary: £50,000 - £58,000 (Depdendent on experience) Shifts: Rotating (Mon-Fri: 6am-2pm / 2pm-10pm / 10pm-6am) Immediate start available for the right candidate On-site canteen facilities Company pension scheme Cycle to Work scheme Health and wellbeing programme Genuine opportunity for progression Company sick pay Staff store discounts About the Role Our client is seeking a skilled electrically biased Maintenance Engineer to join their fast-paced, high-volume manufacturing operation. This is a hands-on, technically engaging role where you'll act as a key engineering contact on shift, driving machinery performance, supporting production, and championing continuous improvement across the site. You'll ideally be multi-skilled, with exposure to PLCs and automated systems, and thrive in a preventative maintenance environment. Working alongside an experienced engineering team, you'll play a critical role in ensuring equipment reliability, minimising downtime, and enhancing operational efficiency. Maintenance Engineer - Day-to-Day Duties Providing reactive maintenance support to the production operation. Assessment, identification, modification and performance of preventive maintenance, scheduled maintenance, modifications, or failures / breakdowns on production and packaging machines / lines, mechanical, pneumatic, hydraulic and electrical. Engineering corrective actions to support the Production Line Manager in ensuring that safe product is produced in line with legislation and Quality standards. Actively identify and implement plans to eliminate unnecessary losses such as cost, waste, and inefficiencies. Undertaking fault finding, problem solving and planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance. Ensuring compliance with quality and safety standards and controls to ensure all work is carried out correctly and safely. Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness. Attend and resolve breakdowns, to ensure minimum down time. Continuous improvement of equipment, improving safety, efficiency, changeovers and minimising downtime. Undertaking improvements projects to increase machine efficiencies and output. Reporting on potential breakdowns, maintenance issues, equipment performance, and plant data. Install and commission new equipment when required. Working with PLC's to fault find and repair production equipment. Carry out checks and inspection of plant, machinery, and equipment, maximise machine utilisation, decrease cycle times. Work closely with the production team. Gain a wide, in-depth knowledge of the current production facility, equipment and processes. Responsibility for the implementation and execution of the factory asset maintenance programme and aimed to eliminate unplanned stops and optimise maintenance cost. Carry out proactive and reactive maintenance on electrical and mechanical systems on the companies state of the art production lines in a number of different areas of the business. Health, Safety & Compliance Adhere to and promote safe working practices Identify and report hazards to maintain a safe environment Accurately report incidents, near-misses, and maintenance issues Maintain high standards of hygiene and housekeeping Skills & Experience Educated to a minimum NVQ level 3 (or equivalent) in an Electrical or Mechanical Engineering time served apprenticeship. 17thor 18th edition wiring regulations is desirable Will have knowledge in electrical or mechanical maintenance, within a manufacturing industry. Have excellent fault-finding and repair skills. Demonstrate strong mechanical comprehension Have working knowledge of PLC fault-finding and repair, any programming skills would be of great interest. Experience of modern manufacturing techniques such as 5S, LEAN and TPM would be ideal. An analytical mind-set coupled with strong interpersonal and communication skills. Be familiar with working to planned and preventative maintenance schedules in a continuous improvement environment. Be keen to learn and develop your skills further with a great work ethic and can-do attitude. Driving licence and own transport. Personal Attributes Proactive, self-motivated, and able to work independently Strong communication skills across all levels of the business Well-organised with the ability to prioritise workload effectively Team-oriented with a collaborative mindset Committed to continuous learning and development This is an excellent opportunity to join a forward-thinking business offering stability, technical challenge, and the chance to make a real impact on operational performance. Why Join? This is your chance to join a company that values its people, supports career progression, and invests in high standards and continuous improvement. If you're passionate about engineering and ready to bring your skills to a dynamic production environment, this is the role for you. How to Apply Sound like the perfect fit? We'd love to see your CV. Please send us your up-to-date CV highlighting your relevant experience. If you're shortlisted, we'll be in touch within 2 working days. INDMG

Senior Mechanical Engineer UK - West Yorkshire - Leeds £35,000 Brief Senior Mechanical Engineer needed for a large, well-known Facilities Management organisation based in Leeds who are looking to employ an experienced and well-rounded Senior Mechanical Engineer that takes pride in their work with an in-depth knowledge of maintenance, repairs, testing and inspection of building, mechanical and electrical services, associated systems, plant and equipment. The successful candidate would have a relevant apprenticeship - i.e. minimum 3 years' post apprenticeship experience in Mechanical etc. - and have a keen interest in Senior Mechanical Engineer. If you have commercial experience in healthcare that would be a plus! Benefits Salary: £35,000 per annum 24 day's holidays Life Cover equivalent to 1.5 times annual salary Employee discount shopping schemes on major brands and retailers Gym membership discounts Cycle to work scheme Holiday purchase scheme 2 corporate social responsibility days per year Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes Attractive Employee Referral Rewards Scheme 24/7 Employee Assistance Program and access to mental wellbeing app What the role entails: Some of the main duties of the Senior Electrical Engineer will include: Carry out maintenance, repairs, testing and inspection of building, mechanical and electrical services, associated systems, plant and equipment in accordance with relevant standards and operational procedures. Carry out duties in accordance with safe working practices within statutory, NHS, Trust and Company guidelines. Provide cover for absent colleagues as appropriate to maintain the service Maintain records and complete service reports as appropriate. Providing regular reports on progress to your line manager On occasion carry out installation work involved in minor upgrading and adaptation works Assist other skilled trades in carrying out maintenance, repairs, testing, inspection and installation work. Undertake training to maintain and develop skills in line with the requirements of the service. Act as Competent or Authorised Person as directed and appointed. Liaise and undertake duties at other healthcare projects as directed. Carry out any other duties as required commensurate with grade.Be able to maintain, service and repair a wide range of the building services listed below: Heating and domestic water services General Electrical services such as lighting and power Air handling units Low voltage electrical distribution system and switchgear Emergency standby generating plant Fire alarm systems and emergency lighting Electrical control systems Building Management System What experience you need to be the successful Senior Mechanical Engineer: Qualified time served engineer with minimum 3 years post apprenticeship experience required Healthcare experience desirable but not essential Cross-trade experience advantageous Work with a high level of multi-skilling and flexibilityThis really is a fantastic opportunity for a Senior Mechanical Engineer to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website

Mobile Multi-Skilled Electrical Engineer Location: Leeds, Manchester, Rochdale, Wakefield, Hull About CBRE Global Workplace Solutions CBRE Global Workplace Solutions (GWS) is a leading global provider of integrated facilities management and real estate services. We are looking for a Mobile Multi-Skilled Electrical Engineer to join our team and support the delivery of maintenance services across multiple sites. This is an excellent opportunity for a skilled engineer with strong electrical and mechanical experience to work in a dynamic environment, supporting critical plant, equipment, and building services while contributing to operational excellence and safety. Key Responsibilities Carry out planned and reactive electrical and mechanical maintenance on plant equipment and building services. Diagnose faults and perform effective repairs on a wide range of industrial and building systems. Conduct preventative maintenance activities to maximise equipment reliability and performance. Support the maintenance and repair of heavy industrial machinery and overhead cranes. Work on three-phase electrical systems (up to 440V), motors, gearboxes, valves, and hydraulic and pneumatic equipment. Identify risks, contribute to safe systems of work, and ensure compliance with health and safety procedures. Update technical drawings and maintenance records as required. Use CAFM systems and mobile devices to manage work orders and maintenance activities. Liaise with site teams and stakeholders to resolve building services issues efficiently. Support departmental health and safety initiatives and deputise for the Shift Leader when required. Participate in overtime, including evenings and weekends, as business needs dictate. Skills & Experience Essential Recognised apprenticeship or equivalent time-served engineering qualification. Proven experience within a manufacturing, industrial, or facilities maintenance environment. Electrical qualification such as City & Guilds 2360/2330, NVQ, or equivalent. 18th Edition Wiring Regulations qualification. Mechanical qualification (City & Guilds, NVQ, or equivalent). Experience working with: Three-phase motors, drives, and inverters. Hydraulic and pneumatic systems. PLC fault-finding and diagnostics. NVQ Level 2 (or equivalent) in Electrical and/or Mechanical Engineering. Experience producing risk assessments, method statements, and permit-to-work documentation. Experience supervising contractors and managing safe working practices. Desirable Working at Height qualification. IPAF certification. Authorised Person (AP) qualifications. Experience within heavy engineering or manufacturing environments

Regional Sales Manager – Electrical Cables & Accessories Job Title: Regional Sales Manager – Electrical Cables & Accessories Construction Sector: Regional Sales Manager, Area Sales Manager, Business Development, Specification Sales Manager, Main Contractors, Subcontractors, End Users, Trade, Electrician, Sales Engineer, Electrical Products, Cable, Cables, Cable Accessories, Data Cable, Data Centres, Power Cable, Rail, Construction, Infrastructure Area to be covered: North East & North West (Newcastle to Crewe) Remuneration: £55,000 - £60,000 negotiable + uncapped commission Benefits: £7,500 car allowance + field sales benefits package The role of the Regional Sales Manager – Electrical Cables & Accessories will involve: Regional Sales Manager position selling a range of electrical cables & accessories All of your time will be spent selling to OEM & end-users Turnover target tbc (very achievable target as it hasn’t been serviced for a period of time) Excellent internal support in terms of quotes and follow ups etc Dealing with order values ranging from £500 - £100k+ The ideal applicant will be an Regional Sales Manager – Electrical Cables & Accessories with: Must have related product experience selling to OEM & end users Must be from an electrical / cables market sector such as; grid connectors, MV, LV, renewables, BESS, datacentres, lighting, electrical circuits etc Stable career background, no job hoppers Excellent communication skills across all levels Able to work autonomously & as part of a team Mitchell Maguire is a specialist construction field sales recruitment consultancy, dealing exclusively with construction field sales jobs, construction field sales vacancies and specification field sales positions within: Regional Sales Manager, Area Sales Manager, Business Development, Specification Sales Manager, Main Contractors, Subcontractors, End Users, Trade, Electrician, Sales Engineer, Electrical Products, Cable, Cables, Cable Accessories, Data Cable, Data Centres, Power Cable, Rail, Construction, Infrastructure

Trainee Service Engineer £38,000 - £42,000 + regular overtime (Double time) + Training + Van + Pension West Yorkshire Are you an electrically biased Engineer seeking excellent dedicated training, day to day variety, a local patch and regular overtime? Here is a fantastic opportunity to join an established and expanding company offering structure pay increases, a professional national employer and great support. Here is a fantastic opportunity to join an established and expanding company offering a home based role, regular overtime, training and day to day variety The company are a national business involved in waste handling and loading bay equipment. Due to winning new long-term contracts, they are looking to expand their operation in key areas of the UK The role involves servicing waste handling equipment including balers and compactors through to loading bay equipment such as dock levellers and scissor lifts. You will be provided with training on the specific equipment if you don't already have it This is a great chance to join an expanding company during an exciting period of growth for the firm The Role: Service Engineer Covering the North East region. Monday to Friday - 50 hours (Guaranteed 50 hours pay even if you only worked 45) Overtime is time and a half 1 in 7 on call rota (£700) Candidate Requirements: Electrical skills - Good *Driving License Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Service Engineer, Field Service Engineer, Mechanical, Fitter, technician, Electrical, Hydraulics, Material Handling, Forklifts, Plant, Access, Scissor Lifts, Dock Levellers, Waste handling, compactors, balers, plant, NVQ, HND, HNC, agricultural, engineer, York, Harrogate, Darlington, Catterick, North Yorkshire, Skipton, Yorkshire, Leeds INDLP

Job Title: Refrigeration Engineer Location: Yorkshire and Lancashire Pay Range/details: £46,791.53 per annum (incl.13 standby payments) Contract Type: Permanent Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer Carry out reactive and planned refrigeration maintenance within agreed timescales. Diagnose faults, identify non-repairable issues and recommend replacements. Complete all PPM, technical and compliance paperwork accurately and on time. Order and fit parts in line with company procedures. Respond promptly to Helpdesk service calls and complete repairs efficiently. Communicate issues affecting store operations to GSMs and build strong working relationships. Complete surveys, reports and job documentation as required. Participate in the out-of-hours standby rota and arrange cover when needed. Working with CO? refrigeration pack systems. Planned on-call rota 1 in 4 weeks (hours of work paid in addition to standby payment) Qualifications & Requirements - Refrigeration Engineer Time-served apprenticeship with NVQ/C&G refrigeration qualification. C&G 2079 / CITB refrigerant handling certificate / F Gas Category 1 Strong refrigeration, electrical, mechanical and diagnostic skills. Ability to read technical drawings and apply relevant H&S legislation. Good communication and customer-facing skills. Self-motivated, professional and able to work at heights using access equipment. Full UK driving licence essential. What we can offer - Refrigeration Engineer 33 Days Holiday (Inc. Bank Holidays). Private Pension. HealthShield Cashback Plan - Reclaim part of your dental/optical costs. OneCity - Employee Discount Platform. Employee Value Awards up to the value of £250. Access to Costco Personal Membership Subscription. Mental and Physical Health Services (Wisdom, Thrive, SkinVision). Electric Car Scheme (Criteria Applies). First Bus Commuter Club - Discounted Bus Travel. For more information on this role, please contact Michael Farrell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Compressor Service Technician Field Service Engineer | Compressed Air Systems Yorkshire – ideally Huddersfield, Leeds, Sheffield £42,000 - £46,000 Basic + Overtime + Company Van + Excellent Benefits Are you an experienced Compressor Service Engineer looking to join a well-established engineering business that genuinely invests in its people? We're recruiting for a Field Service Compressor Engineer to maintain, service and repair a wide range of industrial compressed air systems across Yorkshire and the surrounding regions. This is an excellent opportunity to join a growing organisation offering ongoing manufacturer training, career progression and excellent earning potential. The Role Working from home, you'll attend customer sites carrying out planned preventative maintenance, breakdown repairs and installations on a variety of compressed air equipment. Key Responsibilities Service and maintain industrial air compressors and associated equipment Diagnose mechanical and electrical faults Repair oil-lubricated and oil-free screw compressors Maintain air dryers, filtration systems and compressed air networks Install and commission new compressed air systems Complete planned preventative maintenance schedules Produce accurate service reports and recommendations Ensure all work is completed safely and in accordance with current Health & Safety regulations Participate in a 1-in-7 on-call rota What We're Looking For Previous experience servicing industrial compressed air systems Experience working on manufacturers such as BOGE, Atlas Copco, HPC, CompAir, Kaeser, Ingersoll Rand or similar Strong mechanical and electrical fault-finding skills Background in field service engineering Full UK Driving Licence Excellent customer service and communication skills Ability to work independently and manage your own workload Salary & Benefits £42,000 - £46,000 Basic Salary (DOE) Excellent overtime opportunities Company Van Door-to-door travel (where applicable) Company Pension Ongoing OEM manufacturer training Career progression opportunities Uniform and specialist tools provided * 25 Days Holiday + Bank Holidays Why Apply? This is a fantastic opportunity to join a respected engineering business that values its engineers and provides genuine long-term career development. Whether you're looking to further your technical expertise or progress into senior engineering, supervisory or technical support roles, you'll be supported every step of the way. If you're an experienced Compressor Service Engineer, Compressed Air Engineer, Field Service Engineer or Maintenance Engineer with experience on industrial compressed air equipment, we'd love to hear from you. Apply today for immediate consideration. Start People are the acting agency working on this assignment

EDSB Compliance Solutions are national providers of Fire & Security, Electrical, Mechanical and Building Services. From Design and Specification through to Installation and Maintenance, our focus is to deliver compliance, alongside an unbeatable level of service.We work nationally across the UK and we pride ourselves on being a flexible, client focused organisation responding quickly and efficiently to our clients needs. Our aim is to work closely with our valued clients to ensure our service delivery is exceptional at all times.We are now looking to recruit an Area Co-ordinator to work for our Engineer Attendance team in our Leeds office. Reporting in to the Engineer Attendance Manager, the Area Co-ordinator will be responsible for their area (North/Midlands/South) and the duties are as follows:-Attend engineer planning meetings where required-Liaise with the Engineer Attendance Manager and management team to resolve customer issues-Point of contact for engineers-Log calls via phone/email where required-Ensure Engineer Attendance emails are completed/passed to relevant team to be dealt with-Dispatch engineers on a daily basis to cover callouts-Book in works with customers and re-plan where required-Ensure all engineers calls have been sent to their PDAs-React where necessary to any requests from other members of the EDSB team-React where necessary to any requests from customers, to be helpful, even if this just means passing on the correct contact info for who is best to help-Provide information to customers when requested-Liaise with contractors and co-ordinate where necessary on works being carried out-Ensure Direct Dial phone numbers are always used, not personal mobile numbers-Always use EDSB shared mailboxes for communication, not personal email addressesRequired Skills:-The ability to communicate confidently with people at all levels-Able to work under pressure to maintain deadlines-Excellent organisation, written and numerical skills-Excellent timekeeping and time management skills-Self-motivated and able to work both in a team and using your own initiative-Clear communicator with a good telephone manner-Ability to deal with multiple priorities with a structured and organised approach-To be flexible enough to adapt to the reactive environment of the roleWorking hours are 08:30 to 17:00 with a 45 minute lunch break. Salary will be discussed at interview stage. Successful candidates will be asked to undergo BS7858 Employment Screening and Enhanced DBS check.TPBN1_UKTJ

Service Engineer Multi-Skilled M62 Corridor £40,000 – £45,000 + Overtime (OTE £50k–£55k) Package Includes: 25 days holiday + bank holidays Company vehicle (fully expensed for work use) Matched pension scheme (4%) Extensive training provided (including international training at European HQs) Regular overtime opportunities (£10k typical) Average working week 50–55 hours The Company Our client is a leading distributor of premium European food processing machinery across the UK. With global roots in Canada, they now supply cutting-edge technology to fish, meat, and poultry factories worldwide. Their portfolio covers 10 specialist machinery brands, providing complete solutions for primary, secondary, and further processing. Typical equipment includes: Filleting and portioning machines Dicers and slicers Grinders and mixers Formers and moulders Packaging systems This is a company that invests heavily in training and prides itself on long-term relationships with both staff and customers. The Role – Field Service Engineer As a Field Service Engineer, you will be a key technical expert supporting customers nationwide. You will be responsible for: Installation, service, repair, and commissioning of a wide range of food processing machinery Electrical fault finding, including interpreting and working from electrical drawings Diagnosing and repairing faults on PLCs, HMIs, and 3-phase (up to 415V) systems Running and terminating Ethernet cables and network connections Mechanical work on bearings, shafts, pulleys, chains, conveyors, pneumatics, and hydraulics Completing preventive maintenance schedules to minimise downtime for customers Working away from home up to 4 nights per week, covering sites across the UK Visiting a variety of customer environments including fisheries, poultry farms, and meat processing plants This is a hands-on, varied role that requires a self-sufficient, customer-focused engineer who enjoys problem solving and working with complex machinery. Qualifications & Experience The ideal candidate will have: Recognised apprenticeship or equivalent in Electrical/Mechanical Engineering HNC/HND in Electrical Engineering (preferred) Solid experience within FMCG, ideally in food or packaging machinery environments Knowledge of PLC systems (basic fault finding and I/O diagnostics) Strong understanding of mechanical and electrical systems (pneumatics, hydraulics, conveyors, motors, drives) Willingness to travel extensively across the UK and stay away during the week Why Apply? Work with world-leading machinery brands Structured career development with international training Competitive package with significant overtime earnings Opportunity to become a specialist engineer in a niche, high-demand industry Interested? Contact Dan Walton on (phone number removed) Email: (url removed) SER-IN

Shift Engineer LeedsLocation: Gildersome, Leeds, LS27 7LHJob Type: PermanentSalary: £44,383.00We are looking for a highly versatile, professional and self-motivated individual, who will be part of an engineering team whose role will be dynamic and varied, helping to support the smooth running of our Leeds facility. This is an exciting opportunity to work within a fast-paced environment, laundering more than 750,000 pieces of linen each week.The ideal candidate will possess excellent maintenance and fault-finding skills. They must demonstrate flexibility with a hands-on approach and a can-do attitude dealing with a wide variety of tasks.The Company:Johnsons Hotel Linen, which specialises in supplying the corporate 4-star hotel market and the budget hotel sector is seeking a talented individual to take on the role of Shift Engineer in a busy and challenging environment. This is very much a hands-on role, in which you will provide vital support to the business and contribute to the smooth running of the organisation at Leeds.The Role:Lead by the Head of Engineering (HOE) whilst reporting into the Senior Engineer, you will ensure that reliability is the key metric in the effective maintenance of plant machinery, utilities & buildings. To undertake proactive and reactive maintenance tasks.To take a full and active role in the operation of the Engineering Department.To take an active role in promoting good Health & Safety practices within the department and site.To assist with the implementation of all planned preventative maintenance activities.To be pro-active in seeking remedies to minimise any down time which may affect the operation of the production facility.To follow safe systems of work for engineering activities.Liaise with the Production team to ensure any required maintenance or emergency repairs minimise disruption whilst ensuring work is carried out to the highest standards.Take a pro-active role in daily, weekly or monthly machinery checks and repairs.Deal with day-to-day housekeeping issues across the business covering electrical and mechanical equipment.Adhere to strictest confidentiality standards with regards to all company financial and salary matters.Cover shifts day or night when engineers are on holiday, sick or on training courses.Attend call outs for serious breakdowns if required.To assist with the training of engineering staff.To assist with the completion of health, safety and environmental audits at all plants and ensure completion of recommendations to an acceptable standard.To assist with risk assessments, COSHH manual and update regularly as required.To communicate effectively with all managers, supervisors and colleagues, as necessary, and to work the hours necessary to effectively discharge your duties and responsibilities.To enforce and carry out all tasks to comply with Company Policy on Health & Safety and COSHH requirements.To maintain such H&S records that may be required to comply with regulations and relevant policies.To comply with Company Policies and Terms & Conditions of Employment and follow laid down Company procedures.To ensure that work areas are maintained in a clean, tidy and safe condition always.To attend training courses as required and foster and maintain good working relations throughout the Company.To complete necessary continued personal development.To maintain confidentiality of Company business.Other Ad hoc duties as required.The Candidate:An experienced multi-skilled engineer (electrical bias preferred but not essential)Proven track record within a fast-paced production environment.Proactive and can-do attitude.Working 4 on 4 off Days & Nights. ( 2 Days followed by 2 Nights)Ideally FMCG industry background (preferred but not essential)As part of a growing organisation, Johnsons Hotel Linen offers a competitive salary £44,383.00 along with the opportunity to work in a clean, modern and contemporary production facility.Benefits:Opportunity for the right candidate to work through the engineering grading programme to progress from entry level salary based on skills & competence.SAYE schemeCompany pension,Free Life AssuranceEAP, 24/7 GP Helpline, Health4all Scheme,Discounted gym membershipWedding civil partnership leaveExtra mile awardsLong service awardsBaby boxesThorough onboarding training and induction programmeDeliver the appropriate training to enable you to do your job to the very best of your abilityApprenticeship programs LGV, Textile Care Operative, Team Leading, Management and Customer ServiceFree onsite parking at most sitesJohnsons Hotel Linen is a Disability Confident EmployerNo agencies pleaseTPBN1_UKTJ

Carding Maintenance Engineer Shifts: Days (M - F) or Shift Based considered Salary: circa £60,000 (+ up to £8,000 relocation support) Somerset Are you a time-served engineer with hands-on carding experience? Do you understand fibre behaviour, machine tolerances and the fine adjustments needed to keep carding lines running smoothly? Yolk Recruitment are supporting a rapidly growing world leading textile manufacturer who have increased turnover by more than 150% in five years. With continued investment across the site, they're looking for a Carding Maintenance Engineer to support an existing team with carding machinery performance, reliability and quality. This is a rare opportunity to relocate to the South West and join a specialist process-driven manufacturer where your carding experience genuinely matters. This is what you'll be doing You'll be responsible for maintaining, repairing and optimising a range of carding machinery and fibre-processing equipment. Your work will ensure stable production, consistent web formation and minimal downtime. Responsibilities include: 1. Carrying out planned preventative maintenance (PPM) on carding machines 2. Responding to mechanical and electrical breakdowns across the carding lines 3. Diagnosing faults on cylinders, strippers, doffers, workers, lickers-in, feed systems and delivery sections 4. Performing alignment, clearance setting, tensioning and fine adjustments to maintain fibre flow and web quality 5. Working on machinery such as Trützschler, Spinnbau, Herguth, TAM or similar carding equipment 6. Supporting rebuilds, strip-downs and card clothing changes as required 7. Collaborating closely with production teams to resolve quality issues and improve machine performance 8. Contributing to root cause analysis, asset care and continuous improvement activity 9. Sharing knowledge with apprentices, fellow engineers and operators to build internal capability 10. Ensuring all work is completed safely and in line with company procedures Experience & Qualifications Essential: Proven hands-on experience with carding machinery (standard cards, strippers, or equivalent) NVQ Level 3 or equivalent in Mechanical Engineering Strong mechanical fault-finding and strip-down ability Good electrical awareness (motors, sensors, drives, inverters) Experience working within textiles, nonwovens or fibre-processing environments Ability to work independently and diagnose machine performance issues Understanding of web formation, fibre movement and carding tolerances Desirable: Experience with Trützschler, Spinnbau, Herguth, TAM or similar brands Apprenticeship in carding or textile engineering Exposure to continuous improvement or reliability projects And this is what you'll get in return: £60,000 basic salary Up to £8,000 relocation support for candidates moving to the Bridgwater area 22 days holiday + 8 bank holidays (rising to 25 with service) Christmas & New Year shutdown Pension - 4% employer / 5% employee Full company uniform On-site parking Access to Wellbeing 360 - discounts, GP services, wellbeing tools and more Bike2Work scheme A secure long-term role with a financially strong and growing manufacturer Are you up to the challenge? If this sounds like the right fit, I'd love to hear from you. Please get in touch today with engineering specialist recruiter Liam Reid. Apply with your CV - and feel free to include a short note about your experience with carding machinery. We also offer a referral scheme if you know someone suitable. Please note: due to the high volume of applications, we may not be able to contact everyone. If you haven't heard back within 7 days, please assume you have not been shortlisted on this occasion

Senior Geotechnical Engineer / Engineering Geologist / Geoenvironmental Engineer Leeds, North East England - Hybrid Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary Freedom (Civil) Design is looking for a professional senior (Engineering Geologist/Geotechnical Engineer & Geoenvironmental Engineer) engineer to join our growing team and work on an array of complex and challenging engineering projects that are helping to deliver the country’s Net Zero targets. Our projects span the complete energy system from generation, transmission, distribution and storage, to load-end consumers in manufacturing, processing, data and recycling. As a Senior Engineer, you will work within a specialist team delivering geotechnical and geoenvironmental design services on projects of varying scale. You will manage the production of calculations, drawings, and technical reports; supervise site works; and apply innovative and sustainable engineering solutions. You will provide integrated ground engineering advice, ensuring that geotechnical design solutions are compatible with land quality constraints, environmental legislation, and construction practicability. Some of the key deliverables in this role will include: Lead geotechnical and geoenvironmental design packages and ensure compliance with relevant standards and SHEQ requirements. Manage, interpret, and report geotechnical, geoenvironmental, and chemical ground investigation data. Produce and review interpretative reports, land contamination risk assessments, remediation strategies, and verification plans. Provide technical oversight during remediation, earthworks, and foundation construction activities. Liaise with regulators, laboratories, contractors, and environmental consultants. Identify and mitigate ground and land quality risks throughout the project lifecycle. Support sustainable development through materials reuse, low-carbon solutions, and minimisation of waste disposal. Manage project budgets, programmes, and resources for allocated scopes of work. Contribute to business development activities, including bid support and technical input. Maintain technical excellence and ensure compliance with current industry best practice. Conduct site visits for the supervision of drilling and testing (Investigation Supervisor role). Collaborate with civil and structural teams to integrate geotechnical inputs into design. What we’re looking for: As a senior (Engineering Geologist/Geotechnical Engineer) engineer you will be required to have some of the below experience: Advise on geohazards, ground improvement techniques, and foundation solutions. Familiarity using specialist software (e.g., gINT/OpenGround, HazWaste Online, WAC Analysis). Lead geotechnical design packages and ensure compliance with Eurocode 7, BS 5930, and relevant standards. Conduct site visits for logging, sampling, and supervision of drilling and in-situ testing. Delivery and review of geotechnical analyses including bearing capacity, settlement, slope stability, and ground improvement. Preparation and review of ground investigation scopes, factual reports, and interpretative reports. Land contamination assessment including PRA, GQRA, and DQRA in line with UK guidance. Design and specification of remediation strategies, including earthworks-led remediation and capping solutions. Ground gas and vapour risk assessment and design of protection measures. Waste classification and development of Materials Management Plans under CL:AIRE DOW CoP. Assessment of thermal and electrical resistivity for underground cabling and infrastructure. Provision of geotechnical and geoenvironmental support during construction phases. Benefits: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program (including counselling and legal advice) Flexible benefits including Dental Insurance, Gym Memberships, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we’re on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We’ll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be #Freedom #LI-CN1 #LI-hybrid

A leading multidisciplinary engineering consultancy is seeking an Senior Mechanical Engineer to join their growing building services team. This is an excellent opportunity for a skilled Mechanical Engineer to work on technically challenging projects across sectors including healthcare, education, residential, commercial, industrial, pharmaceutical and public sector developments. The successful candidate will play a key role in delivering high-quality mechanical design solutions, supporting project delivery, mentoring junior engineers and developing strong client relationships within a collaborative engineering environment. As a Senior Mechanical Engineer, you will: ·Lead the mechanical engineering design delivery on selected projects ·Work collaboratively within multidisciplinary project teams ·Manage mechanical design elements from concept through to completion ·Produce technical drawings, specifications and design documentation ·Carry out engineering calculations and support technical reviews ·Attend client meetings and contribute to presentations ·Provide technical guidance and support to junior engineers ·Maintain and improve technical standards within the engineering team ·Contribute to innovative, sustainable and low-carbon engineering solutions Requirements: ·A degree in Mechanical Engineering, Building Services Engineering or equivalent qualification ·Minimum 3-4 years' post-qualification experience within building services design ·Strong experience delivering mechanical engineering solutions within a consultancy environment ·Knowledge of relevant British Standards, Building Regulations and industry guidance ·Experience using design software such as: oRevit oRelux / Dialux oAmtech or equivalent engineering software ·Understanding of sustainable design principles and renewable technologies ·Experience working with BREEAM requirements would be advantageous ·Strong knowledge of HVAC systems and mechanical building services design Desirable ·Chartered Engineer status or working towards chartership ·CIBSE / IMechE membership ·Experience working on complex projects across multiple sectors ·Experience mentoring or supporting junior engineers ·Understanding of electrical engineering principles would be beneficial My client is highly motivated to hire for this position with interviews happening immediately so please apply now to avoid missing out. You must be eligible to work in the UK without visa sponsorship to be considered for this role. To apply, please follow the link or send your CV to Jack James at (url removed)

MECHANICAL MAINTENANCE ENGINEER Job Title – Mechanical Maintenance Engineer Location – Leeds, West Yorkshire Salary – £30,000 – £33,000 Shift – Monday to Friday (Days)Job Role of the Mechanical Maintenance Engineer A fantastic opportunity has arisen for a Mechanical Maintenance Engineer to join a specialist manufacturing business operating within a unique and highly technical production environment. This is an excellent opportunity for an engineer looking to build strong hands-on experience within a small, supportive engineering team.Working as part of the maintenance team, you will be responsible for carrying out both planned and reactive maintenance across specialist glass processing machinery. The role involves diagnosing breakdowns, repairing equipment, and ensuring all machinery is operating safely and efficiently.The process involves high-temperature furnaces, milling systems, and automated crushing and bagging equipment, offering exposure to a wide variety of mechanical systems.Once fully trained, you will also be included in a callout rota (very minimal callouts historically), providing additional responsibility and development.Sector – Factory MaintenanceNon-Negotiable Requirements of the Mechanical Maintenance Engineer Mechanical experienceMust live within 30 minutes of site (callout requirement)Desirable Requirements for the Mechanical Maintenance Engineer Experience within heavy process or industrial manufacturing environmentsBasic understanding of electrical systems (advantageous but not essential)Experience working within small engineering teamsThe Mechanical Maintenance Engineer will benefit from: Working for a stable and specialist manufacturing businessMonday to Friday days role (excellent work-life balance)Very low callout frequency with time off in lieuIncreasing holiday allowance up to 35 days with serviceHands-on engineering role with strong skill development opportunitiesLong-term progression opportunities within the businessTPBN1_UKTJ

Electrical Protection Engineer– Up to £90,000 + Excellent Benefits– Leeds, West Yorkshire The Role Are you an Electrical Protection Engineer with the expertise to deliver protection and control solutions for complex HV and EHV projects? Looking for a role where your knowledge will shape the future of the UK's electricity network while giving you genuine career progression? If so, this could be the perfect opportunity for you. We are looking for an experienced Electrical Protection Engineer to join our growing team in Leeds. You will work on a varied portfolio of transmission, distribution, renewable energy and battery energy storage projects across the UK. From early feasibility through to commissioning support, you'll work alongside experienced engineers and project teams to deliver high-quality protection and control solutions that keep the nation's power flowing. No two projects are the same, giving you the chance to expand your technical knowledge while working on some of the UK's most exciting energy infrastructure developments. Ready to take the next step in your career? Apply today and become part of a team helping power the UK's future. Key Responsibilities: Produce protection and control designs for HV and EHV substations up to 132kV. Prepare protection philosophies, relay requirements, AC/DC schematics and technical specifications. Develop protection single-line diagrams, interlocking schemes and control documentation. Support the integration of protection, control, SCADA and communication systems. Work closely with multidisciplinary engineering teams throughout project delivery. Attend technical meetings, design reviews and client workshops. Provide engineering support during testing, commissioning and energisation. Assist with technical proposals and mentor junior engineers where appropriate. The Company A UK-based team of electrical designers, project managers and engineers with a reputation for providing success, Primary Power are dedicated to delivering professional expertise for EHV, HV and LV schemes across a range of sectors. The Benefits Salary up to £90,000, depending on experience Annual bonus Car allowance Private health insurance Pension scheme Death in Service cover (3x salary) 33 days' annual leave, including public holidays Hybrid and flexible working Chartership support and professional development Clear progression opportunities Overtime available for weekend work where applicable Friendly, supportive working environmentThe Person A Degree, HNC or HND in Electrical Engineering or a related discipline Experience designing protection and control systems for HV and EHV substations Knowledge of protection schemes for transformers, feeders, busbars and generators Experience preparing protection and control documentation Strong communication and stakeholder management skills A full UK driving licence and the right to work in the UK

Mobile Air Conditioning Engineer - Leeds - Global Facilities Management Organisation: Commercial CBW Staffing Solutions are seeking a skilled Air Conditioning Engineer to join our client’s team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems to ensure optimal performance and end-client satisfaction. The ideal candidate will have experience of pressure leak tests, compressor changes and braising. This is a mobile role, covering Leeds and the surrounding area. Package Competitive salary up to £45,000 per annum (depending on experience) Van & fuel card supplied (private use permitted!) Core hours are Monday - Friday (40 hours per week) Participation in an ‘out of hours’ on call rota (to be confirmed) 25 days annual leave plus bank holidays Generous workplace pension scheme Training, development & progression opportunitiesResponsibilities Maintain, service and troubleshoot a variety of air conditioning systems, including split systems, VRV/VRF systems, and chillers Perform routine maintenance tasks, such as cleaning coils, replacing filters, moving parts, to prolong the lifespan of HVAC equipment Diagnose and repair mechanical and electrical faults in air conditioning units, ensuring minimal downtime and maximum efficiency Conduct inspections and assessments of HVAC systems to identify potential issues and recommend appropriate solutions Collaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgrades Adhere to safety protocols and industry regulations to promote a safe working environmentQualifications Proven experience as an Air Conditioning Engineer or similar role within the facilities management industry Hold your F-Gas Cat 1 Regulations certification Full UK driving licence Strong knowledge of HVAC systems, including installation, maintenance, and repair techniques Familiarity with refrigeration principles and equipment Proficiency in diagnosing and troubleshooting mechanical and electrical faults Excellent problem-solving skills and attention to detail Ability to work independently and as part of a team Effective communication and customer service skills If you are a dedicated Air Conditioning Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Amy O'Shea at CBW Staffing Solutions

Mobile Electrical Maintenance EngineerLocation Leeds & North West RegionHours Monday Friday, 40 hours per week 08:00 - 17:00.Benefits include:25 days holiday plus BHCompany VanLife assuranceEmployee discounts via Reward GatewayAccess to a virtual GPAccess to a health & wellbeing appTraining & DevelopmentWe are currently seeking a professional Mobile Electrical Maintenance Engineer . The role is focused on delivery of planned preventative maintenance along with additional works, reactive fault finding , repairs, installations at our prestigious client sites across Leeds City Centre / North West.As an electrically qualified Mobile Maintenance Engineer , the role will be orientated around electrical maintenance works with a requirement for flexibility and willingness to undertake other basic works which fall within the scope of the contract. This could be a variety of jobs relating to maintaining, repairing, and installing assets around the site whether it be a specific piece of equipment, works to a building or the site infrastructure.The Mobile Electrical Maintenance Engineer will work within a team and contribute at both an individual and team level to provide exceptional services and levels of compliance to our client and customers. The ability to develop good working relationships with our client, customers and colleagues with interaction on a professional level being a key requirement for this position.Skills & Experience:Level 3 qualification electrical Engineering or similar recognised qualification18 th Edition.Knowledge of Building Services BMS, Fire Alarm preferableMaintenance and Cleaning of FCUsWater Testing (L8), Fire Alarm testing and general fabric, handyperson tasksWorking on and managing PPMS from CAFM systemWorked within the FM industryMust hold a valid UK driving licenseWell provide you with full training on specialist items once you start and make sure that you have everything you need to do a great job. You will already have experience of working in a similar front of house environment.You will work the above hours and you will have access to employee benefits that will be available to you as soon as you start.Apleona are an equal opportunities employer who deliver facilities management services to clients all over the UK and with vacancies in your area this is a great time to join our teams.If this sounds like a job for you then click on the apply button and well start the process and if youre a good match well be in touch to discuss the next steps.TPBN1_UKTJ

LS33628 Senior AV Installation Engineer £35,000 to £40,000 per annum Leeds (Yorkshire / National coverage) Ready to Lead Projects, Not Just Pull Cable? If you're the engineer everyone turns to when an installation gets complicated, a system won't commission, or a project needs bringing back on track, this could be the role you've been looking for. We're seeking an experienced AV professional who takes pride in delivering exceptional installations, mentoring others, and representing a business professionally on-site. This isn't a role for someone who wants to be told what to do every day. It's for someone who wants ownership. What You'll Be Responsible For You'll take the lead on commercial AV installation projects from first fix through to final handover, ensuring every system is installed, tested, commissioned and delivered to the highest standard. You'll: Lead installation teams on customer sites across the UK Deliver structured cabling, rack builds, equipment installation and system integration Test, fault-find and commission AV systems Work closely with project managers and technical designers to ensure projects are delivered exactly as specified Act as the key point of contact for clients, contractors and site teams Maintain accurate installation records and quality documentation Conduct site quality checks and ensure compliance with company and industry standards Support, coach and develop junior engineers and apprentices Contribute to service, maintenance and remedial works when requiredWhat Makes Someone Successful in This Role? You are technically strong, calm under pressure and confident making decisions on-site. You understand that great AV installations aren't just about technical ability-they're about communication, leadership and attention to detail. You'll likely have: Significant experience installing commercial AV systems Strong understanding of AV signal flow and integration Excellent troubleshooting and fault-finding skills Experience leading engineers on-site A full UK driving licence SSSTS certificationBonus Points If You Have CTS or CTS-I certification Experience delivering large, multi-room or high-profile AV projects Electrical, electronic or network engineering training What's In It For You? We believe experienced engineers should be recognised and rewarded appropriately. You'll receive: £35,000 to £40,000 per annum Company pension Company vehicle (where required) Ongoing manufacturer and industry training Professional certification support Opportunities to progress into senior technical and project leadership rolesThe Role Location: West Yorkshire coverage and Nationwide Travel: Regular site visits with occasional overnight stays Team Leadership: AV Technicians and Apprentices Environment: Commercial AV installation projects across a variety of customer sectors Why Join Us? Because you'll be trusted to do what you do best. You'll work with a company that values quality over shortcuts, invests in its people, and gives experienced engineers the authority to lead projects properly. If you're looking for your next challenge and want to play a key role in delivering outstanding AV installations across the UK, we'd like to hear from you. Apply today and let's discuss where your experience can take you next. Send your CV to: (url removed) or call me on (phone number removed) for a confidential chat. INDAV Key Skills & Keywords Audio Visual (AV) Installation | AV Engineer | Senior AV Engineer | Commercial AV Systems | AV Integration | AV Commissioning | Structured Cabling | Rack Building | AV Signal Flow | Digital Signage | Video Conferencing | Teams Rooms | Control Systems | DSP Configuration | System Testing | Fault Finding | Troubleshooting | Installation Supervisor | Site Lead | Technical Lead | Client-Facing Engineer | AV Technology | Networked AV | Project Delivery | Quality Assurance | CTS | CTS-I | SSSTS | Health & Safety | Commercial Installations | UK-Wide Travel | Team Leadership | Mentoring Engineers | Cable Termination | Equipment Mounting | System Handover | Large-Scale AV Projects | Unified Communications | AV Maintenance | Service Support

Multi-Skilled Maintenance Engineer (Electrical) Location: Leeds Salary range:up to £65,000 + Benefits (depends on level of experience) Working hours: 12-hour shifts (days and nights) - 4 on 4 off Permanent contract Please note: Sponsorship is not available for this role. The Role As a Maintenance Engineer, you will be responsible for ensuring the reliability and performance of production equipment by carrying out planned and reactive maintenance activities. You will work closely with operations teams to minimise downtime and improve machine performance. An exciting opportunity has arisen to join a large, well-established manufacturing business with modern facilities in the Leeds area offering career progression opportunities and PLC training. Due to expansion and increased staffing across shift teams, we are currently recruiting 05 Maintenance Engineers to support operations within a highly automated production environment. Key Responsibilities Perform planned preventative maintenance (PPM) and reactive maintenance on production equipment Diagnose and resolve mechanical and electrical faults Work with automated and PLC-controlled machinery Support continuous improvement initiatives across the site Ensure all maintenance work is completed safely and in line with company standards Collaborate with engineering and production teams to maximise equipment reliability Requirements Experience working in a large manufacturing or industrial environment with complex machinery Multi-skilled maintenance background (electrical) Candidates with strong mechanical experience and an electrical qualification are also encouraged to apply Experience with PLC systems would be highly advantageous Relevant engineering qualification (Apprenticeship, NVQ, HNC/HND or equivalent) Benefits Pension matching up to 6% 12-hour shifts (days and nights) Opportunity for overtime Interested in this role? Send your CV to Luana Ferreira at (url removed) or call her on (phone number removed). Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Job Title: Multi-Skilled Maintenance Engineer (electrical bias) Shift Pattern: 4 on 4 off, days and nights Overview: We are currently recruiting for a Multi-Skilled Maintenance Engineer to join a fast-paced, highly automated manufacturing site. This is an excellent opportunity to become part of a well-established engineering team within a business that continues to invest in its people, processes, and technology. The Role: As a Multi-Skilled Maintenance Engineer, you will play a key role in ensuring the smooth running of production equipment across the site. Working in a 12-hour shift pattern (days and nights), you’ll be responsible for both reactive and planned maintenance, helping to minimise downtime and maximise operational efficiency. Multiskilled Maintenance Engineer - Key Responsibilities: Carry out planned and reactive maintenance on a range of automated production machinery Diagnose faults and carry out electrical and mechanical repairs efficiently Support continuous improvement initiatives to enhance equipment reliability and performance Work collaboratively with production teams to reduce downtime and improve output Ensure all work is completed in line with health & safety and site standards Contribute to root cause analysis and implement corrective actions Multiskilled Maintenance Engineer - About You: Proven experience as a Multi-Skilled Maintenance Engineer within a highly automated manufacturing environment Strong electrical engineering background and relevant qualifications Experience working with automated or high-speed machinery is essential Ability to work effectively in a fast-paced, shift-based environment Proactive approach with a strong focus on reliability and continuous improvement Relevant engineering qualifications (e.g. NVQ Level 3, HNC/HND or equivalent) If you’re a skilled maintenance engineer with an electrical bias looking for a new challenge in a dynamic and growing environment, we’d love to hear from you

Multi Skilled Maintenance EngineerLocation: LeedsSalary: £39,275 + Overtime Available (OTE £42k+)Shifts: Rotating 3-Shift Pattern (2-Week Cycle)Mornings: 06:15 14:15Afternoons: 14:15 22:15Nights: 22:15 06:15About the RoleWe are seeking a Multi Skilled Maintenance Engineer with a balanced mechanical and electrical skillset (50/50) to join a busy and well-established manufacturing operation in Leeds. You will play a key role in maintaining production reliability by carrying out both planned and reactive maintenance across plant and equipment.This opportunity would suit a hands-on engineer comfortable fault finding across both disciplines within a fast-paced manufacturing or production environment.Key ResponsibilitiesCarry out planned preventative maintenance (PPM) and respond to breakdownsDiagnose and repair electrical and mechanical faults on production machineryLog maintenance activity accurately on the CMMS systemSupport continuous improvement initiatives (RCA, 5S, TPM, SMED)Ensure all work is completed in line with health & safety proceduresWork closely with production teams to minimise downtimeAssist with maintenance projects and improvement workSkills & Experience RequiredApprentice trained in Electrical or Mechanical EngineeringExperience within manufacturing or production environmentsBalanced mechanical and electrical fault-finding capabilityMechanical knowledge including bearings, belts, gearboxes, pneumatics, hydraulicsElectrical experience including motors, sensors, control systems or fault diagnosisExperience using CMMS systemsAbility to read engineering drawings and electrical schematicsIT literate (Word / Excel)Flexible to work rotating shiftsWhats on Offer£39,275 base salary + Overtime Available (OTE £42k+)Overtime available21 days holiday + bank holidaysPension schemeOngoing training and developmentLong-term stable opportunity within a growing businessThis is an excellent opportunity for a multi-skilled engineer looking for stability and development within a supportive maintenance team.Apply now to be consideredTPBN1_UKTJ