Field technician jobs in Paterson, New JerseyCreate job alerts

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job Description If you're a top-tier tech stuck in a mid-tier job, Efficient Air Service in Riverdale, NJ, wants to meet you. This is a full-time, year-round opportunity for an Experienced HVAC Technician ready to dominate in a high-energy, growth-oriented environment. You will work full-time, year-round in our fast-paced and supportive Riverdale, NJ environment. WHY YOU SHOULD JOIN US We offer our Experienced HVAC Technician up to $150,000/year (base plus performance bonuses) as well as generous benefits, such as: • PTO, • Medical, • Life insurance, • 401K with match, • Company vehicle, • Year-round work, • Ongoing technical and sales training, • Supportive, growth-focused environment where success is recognized and rewarded Join a family-owned powerhouse established in 2005, built on integrity, trust, and a commitment to your success. ABOUT US Efficient Air Service, a family-owned business established in 2005 by Albert Balonze, has been built on a foundation of excellence, trust, and commitment to outstanding service. From day one, we've taken pride in delivering honest, high-quality work and have earned the loyalty of repeat customers through integrity and reliability. Our highly trained staff bring a confident, can-do attitude to every job, ensuring 100% satisfaction with each service we provide. Whether in the field or in the office, we foster a supportive, fast-paced environment where teamwork and positivity thrive. Our employees are at the heart of our company, and we celebrate their individual and collective achievements as the driving force behind our success. As we grow, we remain deeply committed to our core values- upholding excellence in everything we do, maintaining a positive attitude, delivering exceptional service, and building trust with both our employees and customers. These principles continue to guide us, helping us preserve the personal touch of a small business while expanding our reach and impact. ARE YOU THE EXPERIENCED HVAC TECHNICIAN OUR TEAM NEEDS? • Several years of residential HVAC service experience and the technical skills to prove it, • Ability to diagnose, repair, and maintain heating and cooling systems, • Sales savvy and comfortable talking money and value, and you know how to close upgrades, • Strong communication skills and a "get things done" attitude, • Proven track record of delivering high-quality results and building trust, • Driven to win and advance within a fast-growing company WHAT VITAL ASSISTANCE DO YOU PROVIDE? You will work full-time, year-round in our fast-paced and supportive Riverdale, NJ environment. As an Experienced HVAC Technician, you'll arrive ready to solve problems by diagnosing, repairing, and maintaining complex heating and cooling systems with precision. You'll be the face of Efficient Air Service, building relationships as you clearly explain issues and present options that make sense for homeowners. You'll identify and recommend upgrades and accessories that improve comfort and drive sales results, all while delivering "white glove" service that earns five-star reviews and lifelong customers. ADVANCE YOUR CAREER TODAY! Start building a future with a team that rewards your hustle! Our initial application is mobile-friendly and easy to complete. Apply today!

Job Description Employment Type: Full time Our Service Managers are high energy professionals who not only lead by example, but are also a team player who supports the employees that work for them. A Service Manager performs many different roles as they manage the day-to-day operations of one of our centers, including: generating sales, communicating with customers, building client relationships, managing the technical team, and ensuring that all employees are adhering to company policies and procedures. Position Responsibilities: · Meeting and greeting customers · Managing technician workflow · Recommending services to customers · Ordering parts and inventory · Keeping customers updated on the status of their vehicles' repairs · Managing and tracking lead counts as well as customer satisfaction ratings · Generating and closing sales · Deliver a high level of customer service and quality control over all aspect of the center's business, operations, and work product What We Offer: · Competitive Compensations package · Ongoing training and field support · Daytime work hours · Paid time off · Growth opportunity JOB REQUIREMENTS · Minimum of 5 years of automotive service sales experience OR equivalent sales experience with a track record of success. Transmission sales is a big plus. · Excellent one time closing skills · Strong commitment to customer service and relationship building · Ability to communicate and use interpersonal skills at a sustained high level · Capable of multi-tasking and executing in a fast paced environment · Honest, goal-oriented and energetic team player · Must have valid driver's license Powered by JazzHR zWbawlAilv

Job DescriptionBenefits: • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Paid time off, • Training & development Job Summary: We're looking for an AV Installation & Service Technician to join our North Jersey team, based out of our Ho-Ho-Kus location. In this role, you'll split your time between our shop and clients' homes, installing and supporting smart home automation systems that bring together lighting, shades, audio, video, and security into one seamless experience. This is a hands-on, customer-facing role for someone who takes pride in doing quality work and leaving clients with systems that just work. Our Lead Technicians regularly interact with clients while representing the Daisy brand and develop trusted relationships, helping to enhance their lives through technology. Responsibilities: • Install, configure, and troubleshoot smart home automation systems, including lighting control, motorized shades, audio/video distribution, networking, and home security., • Diagnose and resolve technical issues on-site, both independently and alongside senior technicians or project leads., • Travels to various job sites and client homes to complete installs, service calls and system support; uses hand and power tools safely; maintains company-issued tools, equipment, and vehicle organized and in good working order., • Communicate clearly and professionally with clients and other industry professionals, walking them through system operation and addressing questions on-site., • Communicate daily via Dynamics Portal about the progress of the project. Maintain accurate records of work performed, materials used, and time on each job.Qualifications:, • 2-3 years of AV/Networking /Technology Integration Experience or a related field, • A professional, customer-first attitude — you represent Daisy in clients' homes., • Strong troubleshooting skills and the judgment to know when to solve a problem independently vs escalate it., • Motivated to learn new technologies and processes, • Exhibits strong management and leadership skills; capable of leading and motivating others, • Can pass a drug screen and background check, • Possess a valid NJ Real ID driver’s license and access to a reliable, insured motor vehicle, • Ability to lift and carry equipment (up to 50 lbs) and comfortably work on ladders, in attics, crawl spaces, and other tight job-site conditions.Nice to Have:, • Experience with video wall systems, including mounting, alignment, and calibration., • Manufacturer certifications in control systems, networking, or AV platforms (e.g., Control4, Lutron, Crestron, or similar).Schedule & Travel: This position is based at our Ho-Ho-Kus, NJ location, with regular travel to client homes throughout the surrounding area for installs and service calls. Occasional travel beyond the immediate area may be required as business needs dictate. (All expenses paid by Company) Company Overview: Daisy is a national smart space installation and services company that simplifies smart home and office technology to make it work optimally bringing more joy into the lives of our clients. We design smart home and smart building solutions across lighting, shades, audio, video, and home security. Our North Jersey team delivers hands-on, high-quality installation and support for residential clients throughout the area, backed by the resources and reputation of a national brand. • Our Mission: To enhance the human experience through smart spaces., • Our Vision: To be the most beloved brand in technology service.Additional Information:, • We are a smoke, alcohol, and drug-free environment. This includes our buildings, vehicles, and job sites and/or when wearing our apparel., • We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionVeterinary Technician Certified or Experienced (Surgical & Dental Focus) Location: Oradell, New Jersey Pay: $20.00 - $25.00 per hour (based on experience and qualifications) Join a Team That Makes a Difference Every Day Animal Care of Oradell is a progressive, privately owned small animal veterinary hospital dedicated to delivering compassionate, high-quality care. We are seeking a Certified Veterinary Technician (CVT/LVT/RVT) or an experienced Veterinary Technician (minimum of two years in the field) to join our growing medical team. This position offers the opportunity to use your technical skills in a supportive, team-oriented environment with a strong emphasis on surgical and dental care. Certification is preferred, but candidates with proven hands-on experience in anesthesia, surgical support, and dentistry are encouraged to apply. Key Responsibilities As a vital member of our clinical team, you will: • Assist veterinarians with surgical procedures and anesthesia monitoring Perform dental cleanings and take dental radiographs Provide compassionate patient care and safe animal restraint Prepare patients for surgery and monitor recovery Administer medications and treatments as directed Collect and process lab samples Communicate effectively with clients regarding patient care and follow-up • Maintain accurate medical records and assist with inventory management What We're Looking For Minimum of 2 years of veterinary technician or assistant experience Hands-on experience with anesthesia, surgery, and dental procedures Certification (CVT, LVT, or RVT) preferred but not required Strong communication and organizational skills Positive attitude, reliability, and a team-oriented mindset Compensation & Benefits • Hourly pay: $20.00 - $25.00 (based on skill, experience, and certification) Monthly performance bonuses • Continuing Education (CE) credits and professional development support Team-building events and a collaborative work culture Uniform allowance and tuition reimbursement Full Benefits Package Includes: 401(k) with employer match Medical, dental, and vision insurance Paid time off Employee pet care discounts Flexible scheduling Life insurance Why Animal Care of Oradell Since 2013, our practice has proudly served Oradell and surrounding communities with exceptional veterinary care. We value teamwork, respect, and a healthy work-life balance. Here, your skills and compassion make a real impact every day. How to Apply If you're a skilled veterinary professional looking to grow your career and work with a dedicated team in a positive environment, we'd love to meet you. Please submit your resume and a brief introduction for immediate consideration.

Job DescriptionVeterinary Technician Certified or Experienced (Surgical & Dental Focus) Join a Team That Makes a Difference Every Day Animal Care of Oradell is a progressive, privately owned small animal veterinary hospital dedicated to delivering compassionate, high-quality care. We are seeking a Certified Veterinary Technician (CVT/LVT/RVT) or an experienced Veterinary Technician (minimum of two years in the field) to join our growing medical team. This position offers the opportunity to use your technical skills in a supportive, team-oriented environment with a strong emphasis on surgical and dental care. Certification is preferred, but candidates with proven hands-on experience in anesthesia, surgical support, and dentistry are encouraged to apply. Key Responsibilities As a vital member of our clinical team, you will: • Assist veterinarians with surgical procedures and anesthesia monitoring Perform dental cleanings and take dental radiographs Provide compassionate patient care and safe animal restraint Prepare patients for surgery and monitor recovery Administer medications and treatments as directed Collect and process lab samples • Communicate effectively with clients regarding patient care and follow-up, • Maintain accurate medical records and assist with inventory managementWhat We're Looking For Minimum of 2 years of veterinary technician or assistant experience Hands-on experience with anesthesia, surgery, and dental procedures Certification (CVT, LVT, or RVT) preferred but not required Strong communication and organizational skills Positive attitude, reliability, and a team-oriented mindset Compensation & Benefits • Hourly pay: $20.00 - $25.00 (based on skill, experience, and certification) Monthly performance bonuses • Continuing Education (CE) credits and professional development support Team-building events and a collaborative work culture Uniform allowance and tuition reimbursement Full Benefits Package Includes: 401(k) with employer match Medical, dental, and vision insurance Paid time off Employee pet care discounts Flexible scheduling Life insurance Why Animal Care of Oradell Since 2013, our practice has proudly served Oradell and surrounding communities with exceptional veterinary care. We value teamwork, respect, and a healthy work-life balance. Here, your skills and compassion make a real impact every day. How to Apply If you're a skilled veterinary professional looking to grow your career and work with a dedicated team in a positive environment, we'd love to meet you. Please submit your resume and a brief introduction for immediate consideration.

Job DescriptionDescription: Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when required Controls, Controls Interface & Automation • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system response Preventive Maintenance & Compliance • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and procedures Customer Service & Communication • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicable Leadership & Mentorship • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluations Administrative & Technology Responsibilities • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements: Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction) Experience • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferred Technical Skills • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagrams Physical Demands • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPE Work Environment • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noise Competencies & Attributes • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job DescriptionDescription: Animal Dermatology Group (ADG) is the largest veterinary dermatology business in the U.S., providing the highest quality of specialty care to pets with acute and chronic skin conditions. ADG has over 40 locations nationwide. With over 90 doctors supporting the ADG medical team, they strive to lead in clinical practice, research and education in our field. In additional to providing advanced, dermatology specialized care to patients and supporting general practice veterinarians in our geographic service areas, ADG participates in drug/product development and clinical trials. ADG also has the largest dermatology residency program approved by the American College of Veterinary Dermatology to support the training of the next generation of dermatologists. Animal Dermatology Clinic – Wayne is seeking a Certified Veterinary Technician or Veterinary Assistant. We are looking for someone with the following qualities: • Energetic, • Positive, • Upbeat personality, • Takes initiative, • Commitment to the needs of the clinic, • Punctual, • Willingness to teach others and share ideas, • Openness to diversity, • Adaptability to change, • Accountable, • Able to see big pictureRequirements: Knowledge, Skills and Abilities (including but not limited to): · Previous experience or training/ education in a veterinary facility · Must be friendly, outgoing, “people oriented” · Excellent communication skills · Must be capable of being cross-trained for front office receptionist duties, telephone and computer skills are necessary · Must be a team player willing to learn new techniques, treatments, and accept change Medical Related Skills: · Phlebotomy (LVT applicants) · IV catheter placement (LVT applicants) · Preparing and restraining animals during procedures · Anesthetic induction (LVT applicants) · Anesthetic monitoring · Assisting with procedures · Suture cutaneous and subcutaneous tissues (LVT applicants) · Apply bandages and/or splints · Wound care · Ability to use a stethoscope and otoscope · Advising pet owners on proper care, etc. Duties (including but not limited to): · Demonstrate excellent relations with client/ pets in the waiting area and exam rooms · Exceed the client’s expectations of service · Compassionate nursing care is the top priority for all patients · Housekeeping/ maintenance · Ability to perform a cursory examination of an animal · Ability to recognize potential patient issues · Clearly communicate your findings to a doctor · Record keeping · Fill prescription and dispense medications as prescribed by the doctor, etc. Education and Physical Requirements: · High school diploma or equivalent · Dependable attendance is required · Must be able to lift 40 pounds · Must be willing to work long or irregular hours under pressure conditions · The ability to walk, bend, stand, squat, or reach constantly during a minimum 8-hour day. Benefits: • No weekends, • Competitive wages, • 401K with employer match, • CE opportunities, • Uniforms, • Discounts on services and medications for employee pets *Some traveling may be required For more information about Animal Dermatology Clinic, please visit our website animaldermatology.com!

Job DescriptionSmart, Caring and Responsible Maintenance and Service Technician wanted full-time. KEIL Heating and Air Conditioning are seeking an experienced residential Service Technician for a full-time position. KEIL has been providing comfort to homeowners in Northern New Jersey for over a century and we have a growth opening. This is a great opportunity to be part of a wonderful staff that takes care of our established customer base, some of which have been with us for three generations. We have a fun customer focused environment with friendly, caring co-workers. We're a company committed to quality service by empowering reliable & self-motivated individuals. Goal-oriented candidates will provide planned maintenance and service to our homeowner customers. We are a residential-based company that provides services on ductless, central and high-velocity air conditioning systems as well as gas and LP-fired furnaces, water and steam boilers. Knowledge of using an iPad is a plus as we dispatch, Flat Rate prices and Invoices using our proprietary software on iPads in the field and in the office. Primary Responsibilities: • Perform maintenance on gas furnaces, gas water and steam boilers and central air conditioning systems, water heaters, etc. in the manor set forth by KEIL., • Perform service on gas furnaces, gas water and steam boilers and central air conditioners and water heaters, etc. in the manor set forth by KEIL., • You must be customer focused and always be prepared to deal directly with the homeowner on their terms and always with a positive attitude., • Provide your own hand tools (A complete list is provided by KEIL). KEIL will provide all major tools., • You must be able to climb a ladder both inside and outside of the home without fear of heights., • You must be able to lift and move 75 pounds or more with frequency., • You must be able to clearly and concisely offer replacement systems, accessory items and maintenance agreements to our customers., • You will participate in our Emergency night service rotation., • Have a clean driving record and a current New Jersey driver’s license., • You must have your own transportation to and from our office., • Other responsibilities as assigned by management. Key Competencies: • We are only looking for individuals that possess a high energy level and a positive attitude., • Strong Interpersonal and communication skills - verbal and written (English)., • Strong Listening, problem analysis and problem-solving skills., • Well-organized, accurate and detail-oriented with a hands-on attitude., • Ability to make fast, accurate and logical decisions., • Ability to follow instructions and to provide instruction to others. Education and Experience: • HVAC Technical school graduate (Top 10% Only)., • 2 - 5 years of experience in the residential installation, maintenance and service field., • Continuing education proof., • Refrigeration Certification - Universal., • Gastite certification., • Manufacturer's training certifications., • Customer sales skills., • NATE Certification is a plus., • Computer skills including proficiency in windows based systems. Benefits: • On-the-job training (30 - 60 days with a series of mentors)., • 7:00 - 3:30 Monday - Friday alternate Saturdays plus additional overtime as required., • Advancement opportunities throughout the company., • Professional working environment with your co-workers and our customers., • Uniforms., • Paid holidays and personal days., • Medical Insurance., • Dental insurance., • Life Insurance., • Long-term disability insurance., • 401K plan with company match is provided., • Bonus incentives and residual income opportunities are available., • Profit sharing program based upon hitting company goals. Only those looking for a long-term career with a great team should apply. Please email your resume to be considered for this position.

Job DescriptionSmart, Caring and Responsible Residential Lead installation Technician wanted for a full time career. You owe it to yourself to take a look at this opportunity even if you think your current job is great! KEIL Heating and Air Conditioning is seeking an experienced Assistant Installation Technician for a full time position. This position is only for the individual that is experienced in all aspects of residential heating and cooling equipment installations, including gas fired furnaces, boilers and water heaters, central, ductless and high velocity air conditioners, ductwork, generators and true customer service. KEIL has been providing comfort to homeowners in Northern New Jersey for over a century and we have a growth opening. This is a great opportunity to be part of a wonderful staff that takes care of our established customer base of over 15,000, some of which have been with us for three generations. We have a fun customer focused environment with friendly, caring co-workers who will aid in your growth throughout our company. We're a company committed to quality service by empowering reliable & self-motivated individuals. Goal oriented candidates will provide replacement and new installations to our homeowner customers. Employee Benefits: • 7:00 – 3:30 Monday – Friday plus overtime as required., • Advancement opportunities throughout the company., • Professional working environment with your co-workers and our customers., • Complete uniforms provided., • Paid holidays., • Paid personal days., • Paid vacations., • Medical Insurance - Three Levels Your Choice., • Dental insurance., • Vision Insurance., • Life Insurance equal to your annual salary no charge to you., • Long term disability insurance at no charge to you., • 401K plan with a company match., • Profit sharing program based upon hitting company goals., • Bonus incentives and residual income opportunities., • Production / Quality bonuses. Primary Responsibilities: • Assistant in installing gas furnaces, gas water and steam boilers, central air conditioning systems, air duct systems, water heaters, whole house gas generators, etc. in the manor set forth by KEIL., • Perform an initial start-up on gas furnaces, gas water and steam boilers and central air conditioners and water heaters, etc. in the manor set forth by KEIL., • You must be customer focused and always be prepared to deal directly with the homeowner on their terms and always with a positive attitude., • Provide your own hand tools (A complete list of tools is provided by KEIL). KEIL will provide all large tools., • You must be able to climb a ladder both inside and outside of the home without fear of heights., • You must be able to lift and move 100 pounds or more with frequency., • You must be able to clearly and concisely offer accessory items to our homeowner customers., • Have a current New Jersey driver’s license with a clean driving record., • You must have your own transportation to and from our office., • Must be able to pass a drug test and criminal history background check., • Other responsibilities as assigned by management. Key Competencies: • Must take pride in your workmanship at all levels., • We are only looking for individuals that possess a high energy level and a positive attitude., • Strong Interpersonal and communication skills - verbal and written (English)., • Strong listening and problem solving skills., • A Team Player with the desire and drive to become a Lead Installation Technician within two years., • Well organized, accurate and detail oriented with a hands on attitude., • Ability to make fast, accurate and logical decisions., • Ability to follow instructions and to provide instruction to others. Education and Experience: • HVAC Technical school graduate., • 2 – 3 years of experience as an assistant installer in the residential field., • Continuing education certificates where necessary., • Refrigeration Certification – Universal., • Gastite Certification., • A variety of manufacturer’s equipment training certifications., • Customer communication skills.

\n AMN Healthcare Allied is seeking a travel Mammography Technologist for a travel job in Belleville, New Jersey. Job Description & Requirements\n \n • Specialty: Mammography Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n Job Description & Requirements \n Mammography Tech - (Mam - Mammo Tech) \n StartDate: ASAP Available Shifts: 8 D Pay Rate: $3476.00 - $3582.00 \n Mammography Technologist job in Belleville, NJ: You must have Hologic Dimensions experience, at least 1 year of mammography experience, ARRT M certification, BLS certification, and a current NJ license. You will perform screening and diagnostic mammograms using Hologic Dimensions equipment at the facility, ensuring high-quality images and patient safety. The facility offers advanced imaging services and follows strict protocols for patient care and privacy. You should be skilled in positioning, compression, and image acquisition, and comfortable using electronic medical record (EMR) systems. Belleville, NJ offers a mix of urban charm and outdoor activities for your downtime. You can enjoy pocket parks, river walks, and explore the town’s rich history, including colonial sites and the Old Dutch Reformed Church. Branch Brook Park, partly owned by Belleville, is famous for its cherry blossoms and provides space for walking, tennis, and public art. The town features bowling at Bowlero, billiards at Guys & Dolls, and golf at Hendrick’s Field Golf Course. Belleville’s neighborhoods have unique shops, local restaurants, and seasonal events, making it easy to unwind and experience the community. AMN Healthcare offers excellent compensation, discounts and perks, dedicated recruiters and clinical support, and the AMN Passport app for 24/7 career management. Apply now to join this Travel Mammography Technologist assignment in Belleville, NJ. \n Required Qualifications \n Mammography Technologist, Mammography \n Experience: 1 year \n Licenses: MAMMO-NJ \n Certifications: M-American Registry of Radiologic Technologists \n References: 1 Reference in entire work history \n Mammo Techs require the following documentation upon submisson: \n o a copy of NJ license \n o a copy of current ARRT card \n o a copy of Mammography registry certificate (if no date on it, need ARRT documentation showing registry date) \n o 8 initial hours of digital training \n o 8 initial hours of tomosynthesis training \n o 15 current mammography CME's \n o Initial 40 hours of training/ attestation \n o Current 200 mammography stats \n Preferred Qualifications \n Experienced Traveler Job Benefits \n Allied travel assignments are typically for 13 weeks and offer generous packages that include: \n \n • Competitive pay rates\n, • Medical, Dental, Vision\n, • 401(k) and Flex Spending\n, • Life Insurance\n, • Accident and Short-term Disability Coverage\n, • Free Continuing Education\n, • Competitive Housing Deal\n, • Refer a friend and earn extra cash!\n \n \n About the Company\n \n At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable. \n \n \n mammography technician, mammography tech, mammogram technician, mammogram tech, mammography, mammographer, breast care, mammogram, allied health, allied\n \n AMN Healthcare Allied Job ID #3506043. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Mammography Tech - (Mam - Mammo Tech) About AMN Healthcare Allied\n \n AMN Healthcare is a leading force in the healthcare industry, committed to being the most trusted, innovative, and influential partner for healthcare organizations. With a focus on providing quality patient care, AMN Healthcare offers holistic solutions that reduce costs, streamline processes, and improve efficiencies. The company boasts over 30 years of experience and takes pride in staffing leading healthcare facilities with the nation's best travelers. As an industry leader, AMN Healthcare offers a diverse team dedicated to supporting healthcare workers and facilities, ensuring a personalized and supportive experience for both clients and candidates. \n \n Visit https://www.vivian.com/agencies/amn-healthcare-allied/ for more information. \n Benefits\n \n • Company provided housing options\n, • Medical benefits\n, • Dental benefits\n, • Continuing Education\n \n

Job Description We are looking for a commercial HVAC service estimator with minimum 5 years of commercial HVAC experience to join our service team. This is a commercial service estimator position; applicants with residential service experience or those seeking a sales\account manager position are not encouraged to apply. Successful applicants must have prior field experience with commercial HVAC services. Responsibilities of this position include: • Review assigned service technician reports for field and diagnostic information, • Identify HVAC parts and materials needed for a service repair, • Collect pricing information for necessary parts and materials from local vendors, • Estimate labor hours needed to make repairs, • Write a scope of work for performing identified repairs, • Use company software systems to prepare quote pricing and issue proposals for customer approval, • Respond to customer questions on repair proposals, • Order materials and parts or select them from inventory for approved proposals, • Check materials and parts for completeness prior to technician dispatch for executing repairs, • Participate in weekly estimator meetings for service quoting, • Provide phone support for field technicians performing repairs Benefits include: • flexible paid-time-off plan, • 401K plan with matching, • Multiple healthcare plans, including dental, • Vision, Life & Disability insurances, • Offices closed between Christmas and New Years, as well as other holidays, • Great team environment, • Career Development and Promotion to Leadership Roles Please find out more about Evco online at www.evcomechanical.com Company DescriptionEvco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career Support and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.Evco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career\r\n\r\nSupport and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.

Job Description Job Title: HVAC Technician Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automatio Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Aug 4, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset., • DOT certification, forklift experience, or welding background is a plus. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, competitive pay, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Time Off and Holidays. All Compactor Technicians are members of a Union, and benefits will be provided as outlined in the collective bargaining agreement. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Job DescriptionForeman Organization: Hayes Pump, Inc. Location: Fairfield, NJ FLSA Status: Non-Exempt Pay Range: $40.00 - $50.00 per hour Position Summary Hayes Pump, the largest industrial, commercial, and municipal pump distributor in the Northeast, is seeking a Foreman to lead our growing New Jersey service operation. This position combines technical pump expertise with leadership responsibilities, overseeing daily service operations, coordinating technician schedules, supporting customers, and ensuring high-quality repair and maintenance services. The ideal candidate is an experienced pump mechanic who is ready to take the next step into leadership while remaining actively involved in service operations and technical problem-solving. Benefits Competitive hourly pay Overtime opportunities Company vehicle (if applicable) Factory and manufacturer training Career advancement opportunities Team-oriented work environment Industry-leading products and technical support Comprehensive benefits package Key Responsibilities Supervise and support service technicians and shop personnel. Coordinate daily schedules, work assignments, and service priorities. Serve as the primary technical resource for pump repair and troubleshooting activities. Oversee shop operations and field service activities to ensure quality, efficiency, and safety. Assist with recruiting, interviewing, onboarding, and developing service team members. Participate in hiring decisions and support department growth initiatives. Prepare service packages, work orders, and documentation using company systems and CRM tools. Communicate with customers regarding service needs, repair recommendations, and project updates. Support field service technicians with technical guidance and troubleshooting assistance. Monitor workflow, productivity, and service quality standards. Participate in hands-on repair, maintenance, and rebuild activities as needed. Promote a culture of safety, accountability, and continuous improvement. Ensure all work is completed in accordance with company policies and customer expectations. Required Qualifications Minimum 5 years of pump repair and service experience. Strong knowledge of centrifugal, split-case, and end suction pumps. Proven ability to diagnose and troubleshoot complex pump systems. Experience coordinating work schedules and service activities. Strong customer service and communication skills. Ability to lead, mentor, and support technicians. Experience working independently and making sound operational decisions. Proficiency with computers, service documentation, and CRM systems. Valid driver's license with an acceptable driving record. Ability to obtain a DOT Medical Card. Preferred Qualifications Previous experience as a Lead Technician, Foreman, Supervisor, or Service Manager. Experience working with municipal, industrial, and commercial pumping systems. Experience managing technicians, schedules, and customer expectations. Knowledge of pump manufacturers including Goulds, Xylem, Gorman-Rupp, Fairbanks Morse, Grundfos, Viking, Aurora, or similar products. Knowledge of electrical controls and motor troubleshooting. OSHA 10 certification. Technical or trade school education in a mechanical field. Team Structure Initially supervises approximately 3 employees. Will oversee two newly hired Service Repair Mechanics. Expected to manage 4–5 employees as the department continues to grow. May assist in overseeing future assembly and service operations as responsibilities expand. Schedule & Travel Typical schedule: 7:00 AM – 3:30 PM. Based in Fairfield, NJ. Travel to customer locations and field sites as needed. Travel may increase as service operations continue to expand. Overnight travel may occasionally be required. Travel time is compensated in accordance with company policies. What Makes Someone Successful Successful Foremen are: Highly skilled pump mechanics who lead by example. Strong communicators who build trust with employees and customers. Organized professionals who can effectively balance technical work, scheduling, and leadership responsibilities. Customer-focused and responsive to service needs. Comfortable making decisions and solving problems independently. Committed to safety, quality workmanship, and continuous improvement. Why Join Hayes Pump? Hayes Pump is the Northeast's largest industrial, commercial, and municipal pump distributor. Joining our team means becoming part of an organization known for technical expertise, exceptional customer service, and long-term employee growth. This is an excellent opportunity for an experienced technician looking to advance into a leadership role and help shape the future of a growing service operation.

Job Description We are seeking an entry level technician to join our Chemistry Department. The successful candidate will support data processing, and review data. This is an excellent opportunity for someone looking to enter a career in Chemistry. Key Responsibilities: • Operate Empower software system, • Maintain workflow, • Complete Assay and Impurities Calculations, • Support lab technicians and senior lab personnel with routine lab tasks, data entry, equipment calibration, and record-keeping., • Other Duties as Assigned: Flexibly respond to the evolving needs of the lab, including participating in special projects, audits, or training sessions. Qualifications: • Associate or bachelor’s degree in chemistry or related field required., • Proficient in using Microsoft Office (Excel, Word)., • Strong attention to detail, organizational skills, and ability to follow written procedures., • Advanced understanding of lab safety protocols and chemical handling., • Ability to work independently and as part of a team in a fast-paced environment. Working Conditions: • Work is primarily performed in a laboratory setting with exposure to chemicals and lab equipment., • Requires standing, lifting (up to 50 lbs), and repetitive motion., • Use of personal protective equipment (PPE) is mandatory.

Job DescriptionASBESTOS FIELD PROJECT MONITORS/AIR SAMPLING TECHNICIANSOur firm Omega Environmental Services with its main office in S. Hackensack, NJ, and a satellite office in NYC has continued to expand and evolve as an essential environmental health and safety business during COVID-19. We currently have open asbestos and other field positions for qualified individuals with good communication skills and reliability. We are interested in both candidates with asbestos industry experience/certification(s), as well as entry-level individuals looking to make a career change and/or jumpstart a new career pathway in environmental health and safety. [Asbestos Project Monitor/AST job details]1. After orientation, training, and equipment assignment is complete, project field assignment set-up sheets are emailed out to asbestos field staff based upon their availability (days/nights/weekends). 1. For larger projects greater than 5 shifts, a Project Manager will also coordinate an on-site kick-off meeting to discuss job-specific requirements. A field tech can call the Project Manager and/or Training Coordinator at any time if they have any questions or concerns., 2. PM/AST travels to NY and/or NJ sites with air sampling equipment and required field documentation (punctuality is important because clients/contractors are waiting for us to start abatement projects)., 3. Asbestos air samples are set up at/around abatement work areas(s) according to published regulations and typically run 6-8 hours (while field tech. has to be present on-site and continuously observe and draft a sketch)., 4. After the monitoring shift, the field technician packages/ships air sample cassettes to the assigned laboratory and heads home or back to the office if there are equipment needs., 5. Air results are posted on-site following shift.Qualified candidates must have good communication, computer, and writing skills, plus be able to travel to/from project sites in New Jersey and New York. E04JI800f7i540056ki

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionSalary: $20 / hour Oakland Spine and Physical Therapy is actively interviewing for our Office Aide position! Set in one of our 4 state of the art offices in Oakland, Wayne, Fair Lawn, and Clifton NJ, this is a great entry level job for someone who is interested in getting hands on experience in both a physical therapy gym and medical office setting! Experience is a plus but not needed, willing to train the right candidate who has a strong customer service and patient center background. The office aide acts as a helping hand for both our physical therapy and chiropractic departments. Open to interviewing for both part and full time positions and salary , our full time hours range from Mon/Wed/Fri 8AM-4PM & Tues/Thurs 11AM-7PM What Were Looking For: We are seeking an upbeat, motivated individual who thrives in a team environment and excels at multitasking. Whether you have experience in the medical field or are eager to learn, we want to hear from you! Our ideal candidate is passionate about providing exceptional patient care and has a strong desire to grow in their career. Key Responsibilities: • Patient Support:, • Instruct patients and assist them in setting up for various therapeutic treatments and exercises., • Provide support during physical therapy and medical procedures, ensuring patients have a positive experience., • Assist therapists and medical technicians with patient care, helping them with exercises and mobility needs as directed., • Training Opportunities:, • Receive training on cutting-edge therapies includingPettibon Therapy,decompression,Class 4 Deep Tissue Laser, andshockwave therapy, among other advanced treatment techniques., • Gain hands-on experience with these therapies to support patient care and therapeutic goals., • Administrative and Clinical Support:, • Maintain accurate patient records and assist with processing insurance and billing details., • Keep the office organized and ensure the facility is clean and well-maintained., • Supply and Equipment Management:, • Monitor and manage inventory, ensuring that medical supplies and therapy equipment are adequately stocked., • Assist with ordering supplies and maintaining equipment to ensure it is clean, sanitized, and ready for use., • Team Collaboration:, • Work closely with our physical therapy and chiropractic teams , and office staff to provide seamless patient care and a five-star experience., • Ensure a positive, compassionate environment for patients during their visits. Why Join Us? • Opportunities for hands-on experience in both physical therapy and medical technician support roles., • A dynamic, supportive work environment that prioritizes growth and career advancement., • The chance to be part of a doctor-owned, growing organization committed to providing exceptional care., • Comprehensive training on advanced therapeutic techniques and technologies to enhance your career. Qualifications: • Experience in a healthcare or medical setting is preferred but not required (willing to train the right person)., • Strong communication skills and a team-oriented mindset., • Ability to multitask and stay organized in a fast-paced environment., • Positive, proactive attitude with a passion for patient care. Join Us!If you are an upbeat, self-starter looking for a rewarding career with unlimited growth potential and the opportunity to learn advanced therapeutic techniques, we would love to meet you! Apply now to join our dedicated team and make a difference in the lives of our patients.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off We are seeking an experienced Senior Home Technology Installer & Project Manager to lead residential audio, video, networking, smart home, and CCTV projects from pre-wire through final commissioning. This role is ideal for a highly skilled technician who is ready to take ownership of projects, lead field teams, interface with clients and builders, and ensure exceptional execution and customer satisfaction. This is a hands-on leadership role you will both manage projects and actively participate in installation and system configuration. Key Responsibilities Project Management • Lead residential AV, smart home, networking, and surveillance projects from kickoff to completion, • Review proposals, plans, and scope of work to ensure accurate execution, • Coordinate with homeowners, builders, electricians, and other trades, • Manage job timelines, labor allocation, and material procurement, • Conduct site walks and progress meetings, • Ensure projects are delivered on time, on budget, and to company standards Installation & Technical Execution • Perform and oversee pre-wiring, trim-out, and final installation, • Install and configure:, • Distributed audio systems (e.g., Sonos, Control4, etc.), • Home theaters and media rooms, • TV mounting and structured wiring, • Networking equipment (routers, switches, access points), • CCTV systems (IP cameras, NVRs, remote access setup), • Smart home systems (lighting control, automation, water monitoring, etc.), • Terminate, label, and test low-voltage wiring, • Rack build-out and clean cable management, • System programming and client handoff Leadership & Client Experience • Supervise and mentor junior technicians, • Maintain high installation standards and jobsite cleanliness, • Communicate clearly and professionally with clients, • Conduct system walkthroughs and training at project completion, • Support service department with escalated troubleshooting when needed Qualifications • 5+ years experience in residential AV, low-voltage, or smart home installation, • Proven experience managing projects and leading teams, • Strong knowledge of:, • Home networking fundamentals (IP addressing, VLANs, WiFi optimization), • Distributed audio/video systems, • CCTV systems and remote access configuration, • Structured wiring best practices, • Ability to read blueprints and wiring schematics, • Clean, organized rack-building and cable management skills, • Strong troubleshooting abilities, • Valid drivers license and clean driving record Preferred Certifications (not required but a plus): • Control4, Savant, or Crestron certification, • Networking certifications (Ubiquiti, Araknis, Cisco, etc.) What Were Looking For • A leader who takes ownership of projects, • Detail-oriented and quality-driven, • Calm under pressure and solutions-focused, • Professional and client-friendly, • Passionate about technology and staying current with industry trends Compensation & Benefits • Competitive salary based on experience, • Performance bonuses, • Company vehicle or vehicle allowance (if applicable), • Paid time off, • Ongoing training and certification opportunities, • Career growth into senior operations or technical leadership roles Why Join Us? We are not just installers we are long-term technology partners for our clients. This role offers the opportunity to lead high-end residential projects, work with cutting-edge technology, and be part of a company that values quality, service, and long-term relationships. If youre ready to step into a leadership role and build exceptional smart home experiences, wed love to hear from you.

Job Description Job Title: Systems Specialist Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automatio Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Jul 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description As an HVAC Service Manager, you will be responsible for overseeing and coordinating our service department to ensure the efficient and effective delivery of HVAC services. You will play a pivotal role in managing service technicians, assisting the dispatcher with scheduling, coordinating installations, and maintaining high standards of customer service. Key Responsibilities: • Manage a team of HVAC service technicians, providing leadership, guidance, and support to ensure optimal performance and productivity., • Assist the dispatcher with scheduling service technicians to customer locations for repair, maintenance, and installation jobs in a timely and efficient manner., • Monitor and prioritize service requests, ensuring that customer needs are met promptly and effectively., • Locate and order parts as needed for field staff., • Research and locate service manuals or troubleshooting instruction for a variety of equipment as needed. You will communicate with the field technicians directly and assist them as needed from the office., • Conduct regular performance evaluations of service technicians, providing feedback and coaching to enhance skill levels and job performance., • Oversee the implementation of safety protocols and ensure compliance with industry regulations and company policies., • Handle customer inquiries, complaints, and escalations, resolving issues promptly and professionally to ensure customer satisfaction., • Check technician notes for accuracy at the end of the day and directly communicate with field staff to ensure jobs are properly completed., • Develop and implement process improvements to enhance the efficiency and effectiveness of service operations. Qualifications: • Proven experience in HVAC service management, with a minimum of 3 years of experience in a similar role., • Strong technical knowledge of HVAC systems, including troubleshooting, repair, and installation procedures., • Excellent leadership and communication skills, with the ability to motivate and inspire a team., • Proficiency in computer software applications, including Microsoft Office and HVAC service management software., • Solid understanding of safety regulations and protocols related to HVAC service operations., • Exceptional customer service skills, with a commitment to delivering a positive customer experience., • Valid driver's license and clean driving record. HVAC certification or relevant trade qualifications preferred. Job Type: Full-time Pay: $50,000.00 - $130,000.00 per year Benefits: • 401(k) 4% Match, • Company truck, • Paid time off, • Tools provided Schedule: • 8 hour shift, • Monday to Friday, • Overtime, • Weekends as needed, • Year round work Supplemental pay types: • Overtime pay Work Location: In person

Job DescriptionLevel Up Your IT Career at 360 Networks! Are you an MSP pro ready to tackle complex IT challenges? At 360 Networks, we’re not just another IT company we’re a fast-growing, collaborative team where your skills are valued, your ideas make an impact, and your work directly drives client success. Benefits That Actually Matter: Healthcare costs are no joke, so we make sure you’re covered. We offer industry-leading medical plans with strong employer contributions, paid time off, professional development opportunities, and more helping you focus on IT, not your wallet. At 360 Networks, your career growth and well-being are top priorities. Healthcare You Can Count On: We offer Horizon Blue Cross Blue Shield of New Jersey medical coverage with a low $1,500 deductible real protection that helps keep medical costs down and protects you and your family. 401(k) You’ll Want to Use: Secure your future with our Fidelity Investments 401(k) plan with up to a 4% employer match we help you build retirement savings, not just pay your bills. Time Off & Growth Support: Paid time off + professional development assistance means you recharge, level up your skills, and avoid burnout because great talent thrives when supported. Low Voltage Cabling & CCTV Technician / Installer New JerseyWe are a security integration company serving the NJ/NY area, and we're looking for an experienced Field Technician to join our growing team. If you take pride in clean installs, solid troubleshooting, and showing up ready to work, we want to hear from you. What You'll Be DoingYou'll be out in the field installing structured cabling, camera systems, TVs, and access control systems for our commercial clients across New Jersey and New York. Every day looks a little different and that's part of what makes this role great. What We're Looking For: • 3+ years of hands-on experience installing low-voltage cabling, IP Cameras systems, and TVs., • Computer-literate and comfortable working with technology., • Mechanically inclined with strong knowledge of tools and equipment., • Solid troubleshooting skills you can diagnose problems and get things working., • Valid driver's license with a clean driving record., • Experience with access control systems is a plus. What We Offer: • Company vehicle provided to job sites., • Vacation and sick time., • Overtime opportunities., • Compensation based on experience.

Job Description Overview Join a leading healthcare laboratory as a Medical Laboratory Scientist, where your expertise will directly impact patient care through precise and accurate laboratory testing. This role offers the opportunity to work in a dynamic environment, utilizing your technical skills to analyze specimens, review test results, and ensure quality standards are met all while contributing to a team committed to excellence in diagnostic services. Responsibilities Follow established procedures for specimen handling, test analysis, reporting, and record keeping of patient test results. Maintain records demonstrating proficiency testing samples are processed similarly to patient specimens. Analyze specimens using approved testing techniques in accordance with department SOPs. Review and release test results accurately while adhering to quality control policies. Document and perform instrument calibrations, maintenance, and any corrective actions taken during testing. Follow safety guidelines outlined by CLIA, HIPAA, OSHA, and other relevant standards to ensure a safe working environment. Identify and resolve issues affecting test performance or reporting, escalating when necessary. Report STAT or critical results promptly to clients following departmental procedures. Maintain comprehensive records of all testing performed and ensure reagents/test kits are properly labeled with received, opened, and expiration dates. Participate in ongoing training, safety sessions, and departmental meetings to stay current with procedures and regulations. Assist in inspections and participate in quality assurance activities as needed. Maintain the general appearance of the laboratory workspace, ensuring cleanliness and organization. Required Skills Solid understanding of basic and high-complexity laboratory testing procedures. Strong computer skills with the ability to work across multiple laboratory information systems. Knowledge of quality control (QC) and quality assurance (QA) practices. Ability to review, interpret, and accurately report laboratory test results. Excellent attention to detail and problem-solving skills to identify and address testing issues. Additional Skills & Requirements Bachelor’s degree in Medical Technology, Chemistry, Biology, or a related field preferred; or an Associate degree in Laboratory Science or Medical Technology. Certification as a Medical Technologist (MT) or Medical Laboratory Technician (MLT) from recognized organizations such as ASCP or AMT is highly desirable. Minimum of one year of clinical laboratory experience, preferably in high-complexity testing. Strong interpersonal skills with the ability to interact professionally with team members and clients. Ability to prioritize multiple procedures and handle shifting demands efficiently. Must be able to work in a clinical laboratory setting and comply with safety regulations. Perform your role with precision and professionalism to support accurate diagnostics and quality patient care. Embrace this opportunity to advance your career in a reputable clinical laboratory environment. About Us: All Medical Personnel streamlines hiring to get you back to the work you love. Established in 1990, our staffing business lines place locum tenens, travel nursing, allied health, and clinical laboratory professionals from coast-to-coast. We believe in focusing and uplifting the hiring process, with a deep understanding of the unique challenges you face. We are here to ensure each experience with us is simplified, elevated, and impactful, for you and your patient. Please reference Job number: 301626

Job Description About the Role: The Certified Surgical Technician plays a critical role in supporting surgical teams by preparing operating rooms, ensuring all necessary instruments and equipment are sterile and ready for use. This position is essential for maintaining a safe and efficient surgical environment, directly contributing to positive patient outcomes. The technician collaborates closely with surgeons, nurses, and anesthesiologists to anticipate the needs of each procedure and respond promptly to any changes during surgery. Attention to detail and adherence to strict protocols are paramount to prevent infection and ensure compliance with healthcare regulations. Ultimately, the role demands a commitment to patient safety, teamwork, and continuous professional development. Join our surgical team and enjoy a variety of cases in GI, Urology, Plastic Surgery and Podiatry. Availability on Wednesday is a requirement for this role. Minimum Qualifications: • Current Certification as a Surgical Technologist (CST), • Completion of a formal surgical technology training program recognized by the Commission on Accreditation of Allied Health Education Programs (CAAHEP) or equivalent., • Valid BLS and ACLS certification., • Demonstrated knowledge of sterile techniques, surgical instruments, and operating room protocols., • Ability to pass background checks and comply with healthcare facility regulations. Preferred Qualifications: • Experience working in a hospital or surgical center environment., • Advanced certifications such as Certified Surgical First Assistant (CSFA)., • Familiarity with electronic health records (EHR) and surgical documentation software., • Strong communication skills and ability to work effectively within multidisciplinary teams., • Responsibilities:, • Prepare operating rooms by setting up surgical instruments, equipment, and sterile drapes according to the specific requirements of each procedure., • Assist surgical teams during operations by passing instruments and supplies, anticipating the needs of surgeons, and maintaining a sterile field., • Ensure all surgical instruments and equipment are properly sterilized and maintained, adhering to infection control standards and hospital policies., • Monitor and manage surgical supplies inventory to guarantee availability and timely replenishment., • Collaborate with healthcare professionals to maintain a safe, organized, and efficient surgical environment, including post-operative cleanup and documentation. Skills: The Certified Surgical Technician utilizes their expertise in surgical instrumentation to prepare and maintain the operating room environment, ensuring patient safety and procedural efficiency. Strong organizational skills are essential for managing surgical supplies and coordinating with team members to anticipate procedural needs. Effective communication skills facilitate seamless collaboration with surgeons, nurses, and other healthcare professionals, enabling quick responses to dynamic surgical situations. Technical proficiency with sterilization equipment and familiarity with healthcare documentation systems support compliance with regulatory standards. Continuous learning and adaptability allow the technician to stay current with evolving surgical practices and technologies, enhancing overall team performance.

Job Description Are you seeking a career that makes a meaningful impact on the world? Join us in our mission to empower children with Autism to achieve their full potential and lead joyful, fulfilling lives. Explore lucrative opportunities in the Applied Behavior Analysis (ABA) field, where you can bring about real change for children and their families. Become a part of a devoted community of professionals in ABA, driven by a shared passion for enhancing lives. Perks: Same Day Pay! No more waiting for payday — now you can access a portion of your paycheck right after you clock out. Whether it's an emergency or you just need funds sooner, you'll have the flexibility to get paid immediately. Your time. Your money. On your schedule. Enjoy job security and advancement opportunities in the thriving ABA industry! Experience flexibility and autonomy in your schedule, making it an ideal opportunity for college students. Great opportunities for anyone in Special Education or related fields, as many positions offer afternoon or evening hours. Receive competitive compensation. Ideal for those seeking part-time positions. A fantastic entry point into the field of psychology, providing valuable real-world experience. No experience required! Responsibilities: • Provide one-on-one ABA services to clients, using evidence-based interventions supporting independence and positive behavior., • Serve as an integral member of our clinical team, responsible for the direct implementation of skill building and care plans., • Record session data accurately using electronic devices., • Foster a positive learning environment for clients and connect with families., • Collaborate with families and providers to enhance treatment effectiveness. Qualifications: • High school diploma or equivalent., • Willingness to learn and passionate about making a difference for children with Autism., • Patience, compassion, and the ability to maintain a calm demeanor in challenging situations., • Reliable method of transportation. Need to Knows: • Services will be provided in clients' homes or in the community-based locations., • All positions start off part-time., • Encouraged to take the 40-hour Registered Behavior Technician course., • Minimum 6 month commitment required. This position is perfect for anyone passionate about helping children with Autism thrive! No prior experience is required. Great Fit If You Have Experience In: Education or early childhood development Childcare, babysitting, or youth mentorship Teaching assistant, paraprofessional, or instructional aide roles After-school programs or camp counseling Behavioral health, mental health, or social services ABA therapy or working with individuals with Autism Healthcare support (DSP, CNA, HHA, PCA, caregiver) Supporting a neurodiverse family member or loved one Behavior Technician, ABA, Registered Behavior Technician No experience? No problem! If you're compassionate, patient, and passionate about making a difference, we encourage you to apply. Apply today to join our team, begin your career in ABA, and make that positive difference!

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionBenefits: • Bonus based on performance, • Health insurance, • Training & development We are a security Integrator serving NJ/NY area. We are seeking a field technician to install cable networks, CCTV, and access control systems. Applicant must have at least 1 year of experience installing security cameras or access control readers and locks. Applicant should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills. There are overtime and year-end bonuses. We provide a company vehicle to go to job sites, medical benefits, Aflac options, pension plan, vacation/sick time. Must have a valid and clean driver's license. Compensation depends on experience. A resume must be sent to be considered.

Job DescriptionSalary: Company Overview Montana Construction Inc. is a family-owned heavy construction company specializing in sewer, water, bridge, and emergency services for municipalities, utility authorities, and private entities across New Jersey, New York, and Pennsylvania. We pride ourselves on delivering efficient, dependable, and quality service to every client. Job Summary The CCTV / Grout Technician is responsible for inspecting underground pipelines using closed-circuit television (CCTV) equipment, analyzing footage to identify structural issues, and performing grout mixing and injection for pipeline repair. This is a full-time, on-site role based in Lodi, NJ, requiring strong mechanical aptitude, attention to detail, and a commitment to safety in a demanding field environment. Key Responsibilities • Set up, deploy, and maintain CCTV inspection equipment to assess the condition of underground sewer and utility pipelines., • Review and analyze inspection footage to identify structural defects, blockages, and conditions requiring repair., • Mix, prepare, and inject chemical grout to seal leaking joints, cracks, and infiltration points in pipeline infrastructure., • Maintain accurate and detailed inspection records, daily reports, and work documentation., • Perform basic troubleshooting and field repairs on CCTV and grouting equipment; report significant maintenance needs to the supervisor., • Adhere to all safety protocols, confined space entry procedures, and OSHA requirements at all times., • Drive a CDL-required inspection or grouting truck to and from job sites in compliance with DOT regulations., • Perform other duties as assigned by the Foreman or Superintendent. Required Qualifications • Experience with CCTV inspection equipment for underground pipeline assessment., • Familiarity with grout mixing, injection techniques, and pipeline repair methods., • Strong mechanical aptitude and ability to troubleshoot equipment issues in the field., • Knowledge of construction and pipeline inspection safety protocols, including confined space procedures., • Strong organizational and recordkeeping skills., • Ability to work in confined spaces and outdoors in varying weather conditions., • Valid Commercial Drivers License (CDL) with a clean driving record required., • Current DOT medical certification required. Preferred Qualifications • Experience in heavy construction or underground utility work., • NASSCO PACP/LACP certification or familiarity with pipeline defect coding standards., • OSHA 10-Hour Construction certification., • Willingness to learn and adapt to new tools, technologies, and inspection methods. Work Environment & Physical Requirements • Full-time, on-site role at active construction and inspection job sites across NJ, NY, and PA., • Daily exposure to confined spaces, sewer environments, chemical grouting agents, heavy equipment, and varying weather conditions., • Ability to lift and carry equipment up to 75 pounds regularly., • Ability to stand, bend, kneel, and work in tight or confined spaces for extended periods.

Job DescriptionCompany Summary EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. The In-Home Services field professionals lead all field operations and thousands of technicians across nearly 100 facilities across the country. Devoted to building a collaborative and committed group of employees who manage inventory, fleet and performance - IHS is the driving force that connects our customers with the industry’s best products and services for DISH. Job Duties and Responsibilities Field Resource Coordinators are key players in helping our technicians and our company reach their goals. We are responsible for ensuring that our technician resources are able to service our customers as quickly and efficiently as possible. This is done through day-of route changes and customer appointment scheduling adjustments. Key Responsibilities: • Communicating in real time with In-Home Service Professionals about any issues and the resulting changes to the routing, • Working with technicians to accommodate same day customer appointments, • Tracking and communicating appointments’ progress with field management, • Referring and assigning additional jobs to external subcontractors, • Answering incoming customer calls that arise and handling/transferring appropriately, • Remaining sharp; different tasks are done throughout the day that require significant attention and accuracySkills, Experience and Requirements Education and Experience: • Bachelor's degree from a four year college or university is a plus; or a combination of education and experience Skills and Qualifications: • Be an advocate for our customers; have the drive to build your knowledge of the tools and resources to provide best-in-class customer service, • Effectively communicate, both written and verbally, with all levels of the organization, • Appropriately organize, prioritize, and monitor tasks for effective and efficient work completion, • Adjust to changing responsibilities and priorities in a fast paced, growth-oriented, and time-critical environment, • Have the drive to learn and master DISH’s workforce management (WFM) and customer relationship management (CRM) software, • Spanish bilingual is a plus What’s in it for you? • $24.85 /hour, • Great promotional opportunities, • Comprehensive benefits package including discounted DISH Network services, paid time off, medical, dental, and vision insurance, 401K, employee stock purchase program, and tuition reimbursement Visa sponsorship not available for this role Benefits We offer versatile health perks, including flexible spending accounts, HSA, a 401(k) Plan with company match, ESPP, career opportunities, and a flexible time away plan; all benefits can be viewed here: EchoStar Benefits. The base pay range shown is a guideline. Individual total compensation will vary based on factors such as qualifications, skill level, and competencies; compensation is based on the role's location and is subject to change based on work location. Candidates need to successfully complete a pre-employment screen, which may include a drug test and DMV check. Our company is committed to fostering an inclusive and equitable workplace where every individual has the opportunity to succeed. We are dedicated to providing individuals with criminal or arrest records a fair chance of employment in accordance with local, state, and federal laws. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact leaves@dish.com if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish)

Job Description Job Title: Systems Specialist Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automatio Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Aug 4, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Interface with existing key company stakeholders, to grow business including Automation Specialist, Hydraulic Specialist, Pneumatic Specialist, Field Service Technicians. Qualifications: • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas., • Must be a U.S. citizen or legally authorized to work in the United States We offer comprehensive medical and dental plans, vacation days, sick days and a diverse 401k selection with Company matching. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description Is environmental sustainability a core value of yours? Do you want to help drive the strategic transformation of a mid-sized technology company? Then Hudson Technologies is the place for you! Hudson Technoligies is one of the largest refrigerant reclaimers in North America and is a technology leader in refrigeration energy efficiency solutions. Hudson Technologies has offered sustainable solutions to the HVACR industry for over 30 years. We are transforming the company and broadening the reach of our unique capabilities. Be part of the team that makes this happen! Position Overview We are looking for a Cylinder Exchange Technician to support field cylinder exchanges which provide quick, reliable, and compliant refrigerant cylinder exchange services for HVAC and mechanical contractors. The Cylinder Exchange technician will be on the front lines of this effort—building customer relationships, delivering and picking up refrigerant cylinders, setting up new accounts, and supporting recovery service operations. This role is ideal for someone who enjoys being in the field, is tech-savvy, and thrives in a fast-paced, service-focused environment. Essential Duties and Responsibilities include, but not limited to: • Work with management and sales to build new customers and maintain client base, • Strive to meet gas recovery and buyback goals, • Perform daily route-based delivery and pick-up of refrigerant cylinders to/from customer locations (e.g., HVAC contractors, mechanical shops, chiller plants), • Complete digital work orders including cylinder weights, types and quantities on a timely basis, • Identify and communicate potential sales opportunities for recovery, cylinder exchange, and refrigerant buyback, • Maintain vehicle safety, inventory control, and readiness of all field equipment. Take proper care of assigned vehicle by keeping it clean, in good condition and maintained according to the manual., • Represent Hudson Technologies with professionalism and a commitment to safety and service excellence, • Ensure compliance with all DOT, EPA, and OSHA regulations, • Assist in minor service support or recovery projects when needed, • Follow company processes, procedures, safety standards and schedules with respect to daily activities. Provide reporting on job progress for added visibility., • Demonstrate orientation toward excellent customer service by conducting daily activities, communications, and interactions in a cooperative, positive, and professional manner., • Assist with depot shipping/receiving and delivery of product and equipment with respect to recovered refrigerant., • Perform maintenance on company equipment to ensure performance when in use., • Use Microsoft Teams and other digital platforms to communicate with the operations and sales team, • Track activity using CRM software (e.g., Insightly) and maintain up-to-date communication using Microsoft Teams and other company platforms, • Perform any other duties as assigned Basic Qualifications: • A high school diploma or GED is required, • 1-3 years of related industry or mechanical experience, • Self-motivated and driven to succeed, • Excellent technical, communication, and organizational skills, • Experience with a proven track record in customer satisfaction, • Clean and valid state driver’s license, • Knowledge of Industrial Cooling and Refrigeration Systems, • Strong technical/computer skills — daily use of CRM, Microsoft Teams, digital work orders, and tablets Preferred Qualifications: • CDL Class B with HazMat Endorsement or ability to obtain within 90 days (required condition of employment), • HazMat experience a plus, • DOT Medical Card preferred, • Familiarity with common MS Office tools (MSOffice), • Must pass DOT physical, background check, and drug screening, • Willingness to work outdoors and travel within the assigned territory Physical Demands: • Must be able to work outside in the weather-related elements, • A lot of time will be spent in the truck, driving, • This position entails very heavy work which requires exerting in excess of 100 pounds of force occasionally (possibly up to 350 pounds), and/or in excess of 75 pounds of force frequently, and/or in excess of 50 pounds of force constantly to move/lift objects, • While performing the duties of this job, the employee is regularly required to stand, sit, walk, use hands to finger, handle, or feel, reach with hands and arms, stoop, kneel, crouch or crawl, and talk or hear

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionWe are a security Integrator serving NJ/NY area. We are seeking an employee to install cable networks for CCTV, and access control systems and aisst field technicians. Room for advancement to become a field technician. Applicant must have experience installing voice/data cable runs. Applicant should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills. There are overtime and year-end bonuses. We provide a company vehicle to go to job sites We offer medical benefits, Aflac options, pension plan, vacation/sick time. There is overtime and an end of the year bonus. Must have a valid and clean driver's license. Compensation depends on experience.

Job DescriptionAbout Kinder Growth At Kinder Growth, we are dedicated to helping children with autism build meaningful, strong, and joyful relationships with those around them. We support each child in unlocking their potential, bringing forth a happier, more engaged child. We take tremendous pride in our collaborative and supportive work environment. Employee happiness, professional growth, and open communication are the pillars of our team culture. We know that when our staff thrives, so do the families we serve. Start your journey with us today! Job Highlights Job Type: Part-time Schedule: Flexible (primarily weekday afternoons & evenings, plus optional weekends) Pay: Competitive hourly rate Location: In-home sessions (clients matched within 30 minutes of your location) Caseload: Build gradually to fit your availability Responsibilities Provide playful, 1:1 DIRFloortime therapy to autistic children Build strong, trusting relationships through emotionally attuned play Collect light session data using your phone or tablet Collaborate with and receive ongoing support from credentialed supervisors Requirements: Reliable transportation Ability to engage physically with children (e.g., playing on the floor) Working phone or tablet to collect session data Ability to pass Federal and State background checks Valid form of ID Preferred: Bachelor's degree in a related field (education, psychology, child development, etc.) Preferred: Bilingual (Spanish-English) Preferred: Experience with the DIRFloortime® model Experience (1+ year required) Childcare (babysitting, daycare, preschool teacher, assistant teacher) Special education (educational settings, special needs) Developmental intervention (early intervention) Autism interventions (RBT/Behavioral technician, autism support specialist, ABA therapist, other DIRFloortime experience Benefits Flexible hours — build a schedule that fits your life No long commutes — clients matched within your area Paid mileage between client sessions Weekly mentorship and supervision DIRFloortime training reimbursement Growth opportunities in a dynamic and rewarding field Health insurance available for full-time employees Schedule We ask each employee and family to commit to a minimum of 10 hours per week, with sessions typically lasting 2–3 hours per day. Most sessions take place after school (between 3–8 PM on weekdays) and anytime on weekends. Apply today and help us bring joy and growth to children through play!

Job DescriptionAbout Kinder Growth At Kinder Growth, we are dedicated to helping children with autism build meaningful, strong, and joyful relationships with those around them. We support each child in unlocking their potential, bringing forth a happier, more engaged child. We take tremendous pride in our collaborative and supportive work environment. Employee happiness, professional growth, and open communication are the pillars of our team culture. We know that when our staff thrives, so do the families we serve. Start your journey with us today! Job Highlights Job Type: Part-time Schedule: Flexible (primarily weekday afternoons & evenings, plus optional weekends) Pay: Competitive hourly rate Location: In-home sessions (clients matched within 30 minutes of your location) Caseload: Build gradually to fit your availability Responsibilities Provide playful, 1:1 DIRFloortime therapy to autistic children Build strong, trusting relationships through emotionally attuned play Collect light session data using your phone or tablet Collaborate with and receive ongoing support from credentialed supervisors Requirements: Reliable transportation Ability to engage physically with children (e.g., playing on the floor) Working phone or tablet to collect session data Ability to pass Federal and State background checks Valid form of ID Preferred: Bachelor's degree in a related field (education, psychology, child development, etc.) Preferred: Bilingual (Spanish-English) Preferred: Experience with the DIRFloortime® model Experience (1+ year required) Childcare (babysitting, daycare, preschool teacher, assistant teacher) Special education (educational settings, special needs) Developmental intervention (early intervention) Autism interventions (RBT/Behavioral technician, autism support specialist, ABA therapist, other DIRFloortime experience Benefits Flexible hours — build a schedule that fits your life No long commutes — clients matched within your area Paid mileage between client sessions Weekly mentorship and supervision DIRFloortime training reimbursement Growth opportunities in a dynamic and rewarding field Health insurance available for full-time employees Schedule We ask each employee and family to commit to a minimum of 10 hours per week, with sessions typically lasting 2–3 hours per day. Most sessions take place after school (between 3–8 PM on weekdays) and anytime on weekends. Apply today and help us bring joy and growth to children through play!

Job Description Title: Machine Electronic Control Technician Reports To:Director of Package Development Scope:Provide support for the development, installation, operation, troubleshooting and repairs of packaging equipment, relating to all aspects of machine controls.Responsibilities: • Perform all duties following organization SOPs and cGMPs in accordance with CFR 21, Part 11, 210 & 211., • Work as team member or leader on coordination, design, fabrication and start-up of new projects., • Assists with PLC programming support on all machine integration projects, training of in house personnel, and documentation., • Assist with the installation, troubleshooting and replacement of electric and electronic devices., • Train engineering staff, packaging line mechanics, machine operators and QA inspectors in functions of electrical/electronic devices and basic machine control functions., • Develop and maintain setup sheets, maintenance programs related to inspection systems., • Coordinate all PLC programming, setup of vision systems, data matrix and barcode scanners and related electronic equipment or field devices, including technical and validation documentation., • Design controls and systems relating to operator interface and monitoring systems., • Ability to learn and support new systems, e.g.: Package Serialization, Servos and Vision systems., • Work as team member or leader on design, fabrication of new projects or assemblies and training of operators and the technical support staff on this equipment., • Assist in creation/ review of validation documentation and related support documents such as engineering studies, equivalency statements and test documents on all packaging equipment., • Develop and implement relevant SOPs, Change Controls, Equipment Evaluations and Engineering Studies., • Support and interact, as required, with the Sales, Business Ops, Quality, Purchasing, as well as the Packaging, and the Technical Groups to ensure project status and goals are well communicated and expectations are understood and realized., • Conduct or support investigations of field complaints, deviations or non-conformation events., • Provide direct support to production and projects on all shifts as needed., • Participate in "Off-hours" requests for assistance, • Perform all other tasks assigned.Qualifications:, • Associates degree in Electrical or Electronic Engineering or equivalent experience preferred., • 5-8 years related experience in a packaging enviroment., • Thorough knowledge of all packaging equipment and functions., • Understanding of general industrial process and control systems., • Effective problem solving skills required., • Perform all tasks following industry standards and cGMP’s., • Must be able to work independently and as part of the team., • Must have a good command of the English Language, both written and verbal., • Effective communication and problem solving skills and required., • Proficient using technical software such as PLC, Servo, Vision, HMI, Controls and support software related to the performance of the job., • Proficient using office environment software such as QAD, Excel, Word, Project, and software related to the performance of the job.Physical Demands:, • Ability to lift and transport up to 30 pounds., • Ability to safely move around machines and equipment., • Ability to work in a standing position for 100% of the time or to work in a sitting position for 100% of the time., • The person in this position is required to communicate to employees in all position levels. He/she must be able to exchange accurate information in these circumstances., • Must be able to wear all Personal Protective Equipment (PPE) and gowning as required., • Ability to tolerate fumes from heat and print processes typical in the packaging environment

Job Description Are you an experienced medium/heavy truck technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything diesel? Do you ever ask yourself "I wish I had the opportunity to be a leader"? If so, we have an exciting opportunity for you to become an Instructor at Universal Technical Institute! Never taught? No problem! If you have the drive, patience, and skills we'll train you! You’ve come this far to become an amazing technician…why don’t you take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Diesel Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern diesel technology. What We Offer: • $36 - $40 per hour with opportunity for OT, • Weekends OFF, • Paid Training, • FREE Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K, Paid Holidays, Paid Time Off, • State of the Art Tools and Equipment Responsibilities, • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for diesel mechanics while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing diesel engines., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Safety First: Instill the importance of safety procedures and best practices to ensure a secure working environment for students. Qualifications, • High school diploma or GED, • Experience: 4 years of practical work experience, within the last 10 years in the field, • Certifications: ASEs are highly valued!, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff, • Patience and Empathy: A patient and empathetic approach to teaching, understanding that every student learns at their own pace About Us: It’s all about the reputation. 55+ years of experience, trusted by 35+ industry leading brands, 16 campuses, 5 technical schools. But it’s not all about the numbers. Here at Universal Technical Institute and its family of schools, we care about YOU. We care about making a change in the lives of our employees and our students. We’re on a mission to expand our reach and increase our impact, one life at a time and that starts with yours…Come and be a part of our legacy! You should be proficient in: • Electrical Systems Diagnostics & Repair, • Diesel Engine Systems, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Performance, • Service, • Diesel & Heavy Equipment Systems, • Electrical Systems & Diagnostics (Heavy Equipment)

Job DescriptionSalary: $18 to $22 per HR Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success! We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the NY Metro area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various businesses including retail, hospital, and educational institutions, looking for strong communication skills and enjoyment of working with the public. All training provided by the company. Please email resume to jobs@beveragesystems.org Benefits Offered: • Medical, dental and vision, • Retirement, • EAP Benefits, • Paid-Time-Off, • Company cell phone Here is a brief description of the job: The Technician will professionally diagnose, restore, and repair beverageequipment throughout the day.Responsible for properly installing, repairing and maintaining field beverage equipment. Must represent the company and its customers in a professional manner. Maintain an acceptable level of productivity related to the amount of completed calls. Primary Responsibilities: • Perform installations, repairs and maintenance on commercial beverage and related equipment at our customers location., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform mechanic skills including, but not limited to, mechanical, electrical, plumbing, troubleshooting and repair of beverage equipment., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Demonstrate proper knowledge of equipment. Communicate with the supervisor when extra training may be needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with regulations and maintain a clean and orderly work area., • Conduct yourself in a professional manner at all times while treating customers, driving company vehicles, etc. Treat others how you would like to be treated, • Fill out field service reports properly, legible and with as much information as possible. When eligible., • Maintain frequent communication with the dispatcher to assure that the right information is relayed and entered into our system., • Maintain company vehicles in good working condition, both mechanically and organized., • Arrange for company vehicles to get routine maintenance and any required service. Make sure proper documentation is kept up-to-date and kept in company vehicles at all times.All repairs and service on vehicles covered by the company through our fleet management company., • Fulfill all new and existing training requirements as set by service managers and/or technician development directors., • Must be able to cover emergency calls on weekends on a rotating basis as laid out by the manager to satisfy the market needs., • Other duties as assigned. Qualifications & Requirements: • Must be able to maintain a valid driver's license., • Clean Driver Record, • Occasional Weekend Availability, • Must have some electrical troubleshooting knowledge., • Be able to read volts, amps, ohms and continuity on multimeters., • Must have some plumbing knowledge., • Must provide your own general tools. Specialty industry tools provided to the technician on loan by the company. Working Conditions: Work includes long distance driving. Occasionally lifting of machinery and/or items that may exceed 75 lbs. Must be able to work overtime as requested by management, within reason. If you want to be a part of a growing family business who has a passion for their employees and their customers please email resume to jobs@beveragesystems.org

Job DescriptionNow Hiring: Full-Time Industrial Electro-Mechanical Technician Join our growing team as an Industrial Electro-Mechanical Technician and play a vital role in keeping our production facility operating safely and efficiently. We are seeking a skilled, hands-on maintenance professional with strong mechanical and electrical troubleshooting abilities who enjoys working in a fast-paced industrial environment. This is a full-time position with a regular schedule of 40+ hours per week, including opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You'll Do As an Industrial Electro-Mechanical Technician, you'll be responsible for maintaining, troubleshooting, repairing, and optimizing the equipment that keeps our industrial laundry operation running at peak performance. You'll perform preventive maintenance, diagnose mechanical and electrical issues, and respond quickly to equipment breakdowns to minimize downtime. You'll work on a variety of industrial systems and equipment, including: • Industrial washers and dryers, • Ironers and finishing equipment, • Conveyor systems, • Boilers and steam systems, • Air compressors, • Electrical, mechanical, pneumatic, and hydraulic systems Your expertise will help maximize equipment reliability, improve operational efficiency, and support a safe, productive work environment. What You'll DoKey Responsibilities • Diagnose and Repair Equipment: Troubleshoot and repair electrical, mechanical, pneumatic, hydraulic, and steam systems. Identify root causes of equipment failures and perform corrective repairs with minimal supervision., • Electrical & Controls: Read and interpret electrical schematics, wiring diagrams, and ladder logic. Install, troubleshoot, and maintain electrical systems and control wiring up to 480V three-phase. Perform maintenance on motors, motor controls, VFDs, PLCs, sensors, and electrical circuits., • Preventive Maintenance: Perform scheduled preventive and predictive maintenance on industrial washers, dryers, ironers, conveyors, boilers, air compressors, pumps, motors, PLC-controlled equipment, and other production machinery to maximize equipment reliability., • Industrial Systems: Maintain and troubleshoot pneumatic, hydraulic, compressed air, steam, and boiler systems. Repair and replace various water and air pumps, valves, cylinders, bearings, belts, chains, and related mechanical components., • Equipment Documentation: Accurately document maintenance activities, work orders, parts usage, and equipment history within the Computerized Maintenance Management System (CMMS)., • Safety & Compliance: Follow all company safety policies and OSHA requirements, including Lockout/Tagout (LOTO), arc flash procedures, and safe work practices. Participate in safety inspections and continuous improvement initiatives., • Continuous Improvement: Identify recurring equipment issues and recommend improvements that increase reliability, reduce downtime, and improve production efficiency., • Project Support: Assist with equipment installations, facility expansions, renovations, machinery upgrades, capital improvement projects, and equipment commissioning., • Team Collaboration: Work closely with operations, engineering, and maintenance personnel to resolve equipment issues efficiently. Provide guidance and on-the-job training to less experienced technicians as needed., • Equipment Standards: Maintain all equipment in accordance with manufacturer specifications and company maintenance standards., • Material Handling & Mobility: Safely operate forklifts, scissor lifts, and other maintenance equipment. Work comfortably at heights, outdoors in varying weather conditions, and travel occasionally between facilities when required.QualificationsQualifications, • Must be at least 18 years of age., • Associate degree, technical diploma, or trade certification in Electro-Mechanical Technology, Industrial Maintenance, Industrial Electronics, Mechatronics, or a related field preferred. Equivalent hands-on experience will be considered., • 3–5 years of industrial maintenance experience in a manufacturing, production, or industrial environment., • Strong working knowledge of electrical and mechanical systems, including AC/DC motors, motor controls, VFDs, control panels, and 480V three-phase electrical systems., • Experience troubleshooting and maintaining PLC-controlled equipment, with the ability to read and interpret ladder logic., • Proficient in reading and interpreting electrical schematics, wiring diagrams, P&IDs, and mechanical drawings., • Working knowledge of pneumatic, hydraulic, steam, compressed air, and boiler systems., • Experience using a Computerized Maintenance Management System (CMMS) is preferred., • Knowledge of Lockout/Tagout (LOTO) procedures and NFPA 70E electrical safety standards., • Ability to lift up to 50 pounds and work in industrial environments that may include heights, confined spaces, varying temperatures, and outdoor conditions., • Must possess strong troubleshooting, problem-solving, and communication skills with the ability to work independently and as part of a team.BenefitsCompensation & Benefits, • Competitive hourly pay based on experience, technical skills, and qualifications., • Excellent work-life balance with a 4-day workweek and opportunities for overtime., • Paid time off (PTO) and paid holidays., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with a generous company match., • Company-paid life insurance and long-term disability coverage., • Company-provided uniforms., • Ongoing training and professional development opportunities., • Clear career advancement opportunities, including a defined pathway to Technician III and other leadership roles.Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Engineering Technician Job Description This Engineering Technician role focuses on supporting and enhancing PLC-controlled packaging equipment and automation systems in a regulated manufacturing environment. You will troubleshoot and repair electrical and electronic components, support new machine integration and equipment startups, and help drive continuous improvement initiatives. The position offers hands-on exposure to advanced automation technologies, including PLCs, vision systems, serialization, and servo-driven equipment, while collaborating closely with engineering, quality, and operations teams. Responsibilities • Troubleshoot and support PLC-controlled packaging equipment and automation systems to ensure reliable and efficient operation., • Install, maintain, and repair electrical and electronic components on manufacturing and packaging equipment., • Support machine integration projects, including new equipment installations, start-ups, and controls-related improvements., • Configure, program, and maintain vision systems, barcode and data matrix systems, HMIs, and servo-driven equipment., • Develop, update, and maintain technical documentation, including standard operating procedures (SOPs), setup sheets, engineering studies, and validation documentation., • Train operators, mechanics, and engineering personnel on machine controls, automation systems, and best practices for equipment use and troubleshooting., • Support investigations, change controls, equipment evaluations, and continuous improvement initiatives related to packaging and automation systems., • Provide technical support to production and project teams, responding to issues and helping to optimize equipment performance., • Use technical software tools for PLC, servo, vision, and control platforms to diagnose issues and implement improvements., • Participate in validation, debugging, and optimization activities for new and existing packaging lines and automation systems., • Maintain compliance with regulated manufacturing standards while performing all technical and documentation-related tasks., • Support multiple shifts and occasional off-hours requests to address urgent technical issues or project needs. Essential Skills • Hands-on experience with automation and industrial control systems, including PLC-controlled equipment in a manufacturing environment., • Strong troubleshooting skills in electrical and electronic systems, including field devices and control circuits., • Experience with PLC programming and troubleshooting for automation and integration projects., • Proficiency with servo systems and servo-driven equipment., • Experience with HMI interface design, configuration, and monitoring systems., • Knowledge of packaging line equipment, including design, operation, and maintenance., • Experience with serialization systems used in packaging or regulated manufacturing., • Proficiency with vision inspection systems and image-based quality or verification tools., • Experience with data matrix and barcode systems for product identification and tracking., • Ability to use technical software for PLCs, servo systems, vision systems, and control platforms., • Proficiency with office software, including Excel, Word, Project, and QAD or similar systems., • Ability to interpret electrical and electronic schematics accurately., • Experience working in an industrial automation environment, preferably within regulated manufacturing., • Strong written and verbal communication skills in English., • Demonstrated technical problem-solving ability and analytical thinking., • Ability to work independently and as part of a cross-functional team., • Ability to maintain compliance with regulated manufacturing standards., • Physical ability to lift up to 30 lbs, stand for long periods, work around machinery, and wear required PPE and gowning., • Ability to work safely in environments with exposure to fumes and heat in a packaging setting., • Flexibility to support multiple shifts and occasional off-hours requests as needed. Additional Skills & Qualifications • Experience developing and maintaining technical documentation such as SOPs, setup sheets, engineering studies, and validation documents., • Experience in supporting investigations, change controls, and equipment evaluations., • Experience training operators, mechanics, and engineering personnel on machine controls and automated systems., • Exposure to high-tech packaging systems and regulated manufacturing processes., • Experience participating in continuous improvement initiatives for packaging or automation systems., • Comfort working in a cross-functional environment with engineering, quality assurance, and operations teams., • Interest in leading projects and mentoring or training others in automation technologies., • Mechanical aptitude and familiarity with mechanical aspects of packaging equipment. Work Environment This role is based in a regulated manufacturing and packaging environment with advanced automation technologies, including PLCs, vision systems, serialization, and servo-driven equipment. You will work standard weekday hours, Monday through Friday, typically from 8:30 a.m. to 5:00 p.m. or 9:00 a.m. to 5:30 p.m., with flexibility to support multiple shifts and occasional off-hours requests when needed. The position involves working around operating machinery, standing for extended periods, and lifting up to 30 lbs. You will wear appropriate personal protective equipment (PPE) and gowning and may experience exposure to fumes and heat in the packaging area. The environment encourages cross-functional collaboration with engineering, quality, and operations teams, and offers opportunities to lead projects, train others, and work on installation, debugging, validation, and continuous improvement activities in a high-retention, technology-driven setting. Job Type & Location This is a Permanent position based out of Wayne, NJ. Pay and Benefits The pay range for this position is $72000.00 - $83000.00/yr. Competitive compensation, health insurance, retirement plan, paid time off, and opportunities for training and advancement. Workplace Type This is a fully onsite position in Wayne,NJ. Application Deadline This position is anticipated to close on Aug 3, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Electrical BIM Technician / Electrical CAD Designer Location: Lyndhurst, NJ Job Type: Full-Time or Part-Time Compensation: Competitive pay based on experience Join a Growing Construction Technology Company Elite CAD Designs is seeking an experienced Electrical BIM Technician / CAD Designer to join our growing team. We are looking for an individual with strong electrical construction knowledge who can transform design intent into accurate, constructible models and installation drawings. This position is ideal for someone with commercial electrical installation experience, electrical drafting experience, or both. Electricians looking to transition from the field into an office environment are encouraged to apply. At Elite CAD Designs, we specialize in Building Information Modeling (BIM), MEP coordination, prefabrication drawing production, Reality Capture, laser scanning, and Digital Twin solutions for commercial construction projects throughout the United States. Responsibilities • Produce detailed electrical shop drawings and installation drawings., • Develop and maintain electrical BIM models using Revit and AutoCAD., • Create coordinated 3D models for commercial construction projects., • Participate in BIM coordination and clash detection with mechanical, plumbing, fire protection, structural, and architectural trades., • Review engineering drawings and identify constructability issues before installation., • Assist with prefabrication and fabrication drawing production., • Coordinate with project managers, field personnel, contractors, and clients., • Maintain organized project documentation and ensure drawing accuracy throughout project execution. Qualifications • Commercial electrical installation experience and/or electrical drafting experience preferred., • Ability to read and interpret construction documents required., • Strong understanding of commercial electrical systems required., • Excellent communication and organizational skills., • Ability to work independently while contributing to a collaborative team environment., • Strong attention to detail and commitment to quality., • Additional experience in Mechanical, Plumbing, Fire Protection, or other MEP trades is highly desirable., • OSHA 10 or OSHA 30 certification is a plus but not required. Preferred Experience with one or more of the following: • AutoCAD, • Revit, • AutoCAD MEP, • Navisworks, • Revisto, • Autodesk Forma, • Bluebeam What We Offer • Competitive compensation based on experience., • Opportunities for career advancement., • Ongoing training in BIM, VDC, Reality Capture, and emerging construction technologies., • Exposure to large-scale commercial, healthcare, education, industrial, and infrastructure projects., • Collaborative and professional work environment., • Stable, long-term employment with a growing technology-driven company.

Job DescriptionTITLE: HELPDESK TECHNICIANLOCATION: HACKENSACK, NJ Seeking a Help Desk Technician for our client’s Hackensack, New Jersey office. The schedule is Monday through Friday, 9:30 a.m. to 5:30 p.m.JOB SUMMARY:The position involves providing technical assistance for hardware, software, and mobile devices, supporting video conferences through Teams and Zoom, maintaining equipment inventory, and documenting support activity in the Firm’s ticketing system. The role requires adherence to established procedures, strong documentation discipline, and the ability to work effectively both independently and in a team environmentREQUIREMENTS: • Candidates should have experience with Microsoft Windows 11, Microsoft 365 (especially Outlook and Word), and iManage (strongly preferred)., • Applicants must have excellent written and verbal communication skills, strong interpersonal ability, and the aptitude to learn new tasks quickly., • Periodic travel to other Firm offices is required, along with additional travel for office buildouts and expansions., • The position also requires flexibility to provide occasional shift coverage or extended hours when needed., • A law firm or professional services background is preferred., • An associate’s or bachelor’s degree in information systems or a related field, or equivalent work experience, is also preferred.

Job Description Purpose of Role: We are seeking a skilled IT Application & Systems Support (Level III) professional to join our law firm in Roseland, NJ. This role is designed for an experienced support technician who combines hands-on technical troubleshooting with systems administration responsibilities. The ideal candidate is a team player who enjoys working directly with employees, onboarding new technologies, and augmenting department workflows to increase productivity. This role will support the firm’s technology stack across applications, identity management, networking, firewalls, switches, and endpoint systems, ensuring stability, security, and efficiency across all offices and remote environments. Responsibilities: • Provide exceptional technical support via phone, email, and in-person assistance to employees., • Administer Active Directory and Azure AD / Entra ID including group policies., • Manage user accounts, permissions, and role-based access controls., • Deploy, manage, and troubleshoot switch, access point, and firewall infrastructure., • Deliver remote and on-site assistance to users to enhance productivity., • Support business applications used by legal teams including Microsoft 365 and document management systems., • Support Microsoft 365 administration including Exchange Online, Teams, SharePoint, and OneDrive., • Troubleshoot network issues including DNS, DHCP, VPNs, and wireless networking., • Support and maintain print servers and enterprise printing environments., • Manage patch deployment across the firm’s fleet of desktops, laptops, and mobile devices., • Maintain IT documentation and configurations., • Track support requests through the ticketing system and ensure SLA compliance., • Coordinate with vendors for escalation and issue resolution., • Audit and augment departmental workflows via automation and new technologies., • Assist with system upgrades, infrastructure improvements, and new technology deployments., • Support implementation of security best practices and vulnerability remediation., • Travel to external locations as necessary to provide on-site support., • Be available for on-call support during nights, weekends, and holidays as needed. Qualifications: • Bachelor’s degree in IT, Computer Science, or related field preferred., • Industry certification such as Network+, Security+, Microsoft SC-200, MD-102, and CCNA preferred, • 3+ years of experience in IT support, systems administration, or infrastructure support., • Strong knowledge of Windows environments, Active Directory, and Microsoft 365 administration., • Experience with networking and security solutions from Cisco, Aruba, Ruckus, Juniper, Meraki, Fortinet, and/or Palo Alto Networks is preferred., • Proficiency in Microsoft 365 collaboration tools., • Experience supporting network infrastructure including TCP/IP, DNS, DHCP, VPN, and wireless., • Experience managing endpoint fleets and patch management systems., • Experience managing print servers and enterprise printing environments., • Experience with scripting or automation tools such as PowerShell or Python., • Understanding of identity management, endpoint protection, and security practices., • Strong troubleshooting and analytical skills., • Excellent communication skills and ability to support non-technical users. Compensation & Benefits: This position offers a salary range of $65,000 - $75,000 annually, commensurate with experience and qualifications. Final compensation will be determined based on factors such as experience, skills, and qualifications. Support staff may also be eligible for discretionary year-end bonuses and a merit-based increase. Our comprehensive benefits package includes medical, dental, vision, life and disability insurance, a 401 (k) retirement plan, paid time off, and access to additional voluntary programs. The posted salary range reflects the base pay range for this position. Equal Opportunity Employer: Mandelbaum Barrett PC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, veteran status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionTITLE: HELP DESK TECHNICIANLOCATION: HACKENSACK, NJSCHEDULE: M-F (9:30AM-5:30PM) Job Summary: Seeking a Help Desk Technician to complete our client’s four-person Helpdesk team. The position involves providing technical assistance for hardware, software, and mobile devices, supporting video conferences through Teams and Zoom, maintaining equipment inventory, and documenting support activity in the Firm’s ticketing system. Applicants must have excellent written and verbal communication skills, strong interpersonal ability, and the aptitude to learn new tasks quickly. The role requires adherence to established procedures, strong documentation discipline, and the ability to work effectively both independently and in a team environment. Requirements: • Significant experience with Microsoft Windows 11, Microsoft 365 (especially Outlook and Word),, • I Manage experience (strongly preferred), • Ticketing system experience, • A law firm or professional services background is preferred., • An associate’s or bachelor’s degree in information systems or a related field, or equivalent work experience, is also preferred., • Periodic travel to other Firm offices is required by a team member every few months, along with a couple of additional trips each year by some team members for office buildouts and expansions., • Flexibility to provide occasional shift coverage or extended hours to cover planned and unplanned PTO.

Job Description Freedom to Perform. Opportunity to Earn. This opportunity is built for a self-directed sales professional who enjoys variety, thinks quickly, and stays focused on results. Each day brings different homeowners, different comfort challenges, and the freedom to lead the conversation without constant supervision. Efficient Air Service is hiring a full-time In-Home HVAC Sales Representative in Riverdale, NJ. This is a commission-only position with uncapped earning potential of $160,000–$300,000+ annually, based on individual sales performance. Strong performers build genuine relationships while keeping the appointment moving toward a decision. They bring confidence, adaptability, follow-through, and personal accountability. Why Join Efficient Air Service? Efficient Air Service is a family-owned company that has served local homeowners since 2005. We have earned customer loyalty by providing honest recommendations, dependable service, and quality work. Sales representatives receive support from experienced office, service, and installation teams. There is room to work independently, along with clear expectations for communication, documentation, and customer follow-through. What You Will Do Meet with homeowners who are considering replacing or upgrading their heating and cooling systems. Each appointment includes evaluating the existing system, uncovering comfort and reliability concerns, presenting replacement options, explaining pricing and financing, handling objections, and guiding the homeowner toward a decision. This is a consultative role, but it is also a closing role. Success requires the ability to listen, lead the conversation, and confidently ask for the sale. Who We Are Looking For The ideal candidate has experience as an HVAC Comfort Advisor, HVAC Sales Representative, or residential in-home sales professional. HVAC Service Technicians and HVAC Installers with strong communication skills and an interest in sales are also encouraged to apply. Proven in-home salespeople from roofing, windows, siding, solar, remodeling, plumbing, electrical, pest control, painting, automotive, and other high-ticket industries will also be considered. HVAC experience is preferred, but strong sales ability, initiative, accountability, and follow-through are just as important. Required Qualifications You must be comfortable working independently, managing customer appointments, discussing pricing, handling objections, and following through without constant reminders. A valid driver's license and an acceptable driving record are required. This is a full-time, appointment-based position serving residential customers in Riverdale, NJ, and the surrounding area. Relevant Experience Strong candidates may come from roles such as HVAC Comfort Advisor, HVAC Sales Representative, HVAC Service Technician, HVAC Installer, or residential home-comfort sales. We will also consider proven in-home sales professionals from roofing, windows, siding, solar, remodeling, plumbing, electrical, pest control, painting, automotive, and other high-ticket industries. Compensation and Benefits • Commission-only with uncapped earning potential of $160,000–$300,000+ annually, • Health and vision insurance, • 401(k) with company match, • Company vehicle, • Year-round work, • HVAC product and on-the-job training Take Ownership of Your Next Opportunity This role is built for someone who enjoys meeting new people, working through different challenges, and being rewarded for personal performance. Whether you are an experienced HVAC salesperson, an HVAC field professional ready for a new direction, or a proven in-home closer from a related industry, we want to hear from you. Apply today to join Efficient Air Service. Our application is quick, easy, and mobile-friendly.