Field technician jobs in Lodi, New JerseyCreate job alerts

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off, • 401(k) matching, • Dental insurance, • Opportunity for advancement, • Training & development, • Vision insurance Company Overview Kitchen Dynamics is a service provider in the commercial kitchen equipment industry. We offer commercial kitchen equipment maintenance, repairs and installations. Our clientele includes hotels, restaurants, hospitals, schools and corporate customers. Responsibilities We are seeking a Refrigeration Technician to work with us and provide service to our customers. The technician will be responsible for diagnosing and repairing equipment for commercial clients within the food service industry. The technician will report to the Service Manager as well as the Owner. We are a small, growing company and are looking for candidates that enjoy working in a small team with close collaboration. Duties Diagnosing and repairing equipment Reading and understanding manufacturer schematics Installing units to manufacturers specification Performing preventative maintenance Removing and disposing of refrigerant Repairing or upgrading systems Calibrating systems Inspecting and testing systems and components Discussing system malfunctions with customers Recommending maintenance plans to customers to improve system performance Qualifications EPA Certification Clean Drivers License Minimum of 5 years of experience Experience in servicing food and beverage industry is a plus Flexible to work some weekends when needed Skills Creative problem-solving abilities Detail oriented, organized Good communication skills Location On the field

Job DescriptionVeterinary Technician Certified or Experienced (Surgical & Dental Focus) Location: Oradell, New Jersey Pay: $20.00 - $25.00 per hour (based on experience and qualifications) Join a Team That Makes a Difference Every Day Animal Care of Oradell is a progressive, privately owned small animal veterinary hospital dedicated to delivering compassionate, high-quality care. We are seeking a Certified Veterinary Technician (CVT/LVT/RVT) or an experienced Veterinary Technician (minimum of two years in the field) to join our growing medical team. This position offers the opportunity to use your technical skills in a supportive, team-oriented environment with a strong emphasis on surgical and dental care. Certification is preferred, but candidates with proven hands-on experience in anesthesia, surgical support, and dentistry are encouraged to apply. Key Responsibilities As a vital member of our clinical team, you will: • Assist veterinarians with surgical procedures and anesthesia monitoring Perform dental cleanings and take dental radiographs Provide compassionate patient care and safe animal restraint Prepare patients for surgery and monitor recovery Administer medications and treatments as directed Collect and process lab samples Communicate effectively with clients regarding patient care and follow-up • Maintain accurate medical records and assist with inventory management What We're Looking For Minimum of 2 years of veterinary technician or assistant experience Hands-on experience with anesthesia, surgery, and dental procedures Certification (CVT, LVT, or RVT) preferred but not required Strong communication and organizational skills Positive attitude, reliability, and a team-oriented mindset Compensation & Benefits • Hourly pay: $20.00 - $25.00 (based on skill, experience, and certification) Monthly performance bonuses • Continuing Education (CE) credits and professional development support Team-building events and a collaborative work culture Uniform allowance and tuition reimbursement Full Benefits Package Includes: 401(k) with employer match Medical, dental, and vision insurance Paid time off Employee pet care discounts Flexible scheduling Life insurance Why Animal Care of Oradell Since 2013, our practice has proudly served Oradell and surrounding communities with exceptional veterinary care. We value teamwork, respect, and a healthy work-life balance. Here, your skills and compassion make a real impact every day. How to Apply If you're a skilled veterinary professional looking to grow your career and work with a dedicated team in a positive environment, we'd love to meet you. Please submit your resume and a brief introduction for immediate consideration.

Job DescriptionBenefits: • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Paid time off, • Training & development Job Summary: We're looking for an AV Installation & Service Technician to join our North Jersey team, based out of our Ho-Ho-Kus location. In this role, you'll split your time between our shop and clients' homes, installing and supporting smart home automation systems that bring together lighting, shades, audio, video, and security into one seamless experience. This is a hands-on, customer-facing role for someone who takes pride in doing quality work and leaving clients with systems that just work. Our Lead Technicians regularly interact with clients while representing the Daisy brand and develop trusted relationships, helping to enhance their lives through technology. Responsibilities: • Install, configure, and troubleshoot smart home automation systems, including lighting control, motorized shades, audio/video distribution, networking, and home security., • Diagnose and resolve technical issues on-site, both independently and alongside senior technicians or project leads., • Travels to various job sites and client homes to complete installs, service calls and system support; uses hand and power tools safely; maintains company-issued tools, equipment, and vehicle organized and in good working order., • Communicate clearly and professionally with clients and other industry professionals, walking them through system operation and addressing questions on-site., • Communicate daily via Dynamics Portal about the progress of the project. Maintain accurate records of work performed, materials used, and time on each job.Qualifications:, • 2-3 years of AV/Networking /Technology Integration Experience or a related field, • A professional, customer-first attitude — you represent Daisy in clients' homes., • Strong troubleshooting skills and the judgment to know when to solve a problem independently vs escalate it., • Motivated to learn new technologies and processes, • Exhibits strong management and leadership skills; capable of leading and motivating others, • Can pass a drug screen and background check, • Possess a valid NJ Real ID driver’s license and access to a reliable, insured motor vehicle, • Ability to lift and carry equipment (up to 50 lbs) and comfortably work on ladders, in attics, crawl spaces, and other tight job-site conditions.Nice to Have:, • Experience with video wall systems, including mounting, alignment, and calibration., • Manufacturer certifications in control systems, networking, or AV platforms (e.g., Control4, Lutron, Crestron, or similar).Schedule & Travel: This position is based at our Ho-Ho-Kus, NJ location, with regular travel to client homes throughout the surrounding area for installs and service calls. Occasional travel beyond the immediate area may be required as business needs dictate. (All expenses paid by Company) Company Overview: Daisy is a national smart space installation and services company that simplifies smart home and office technology to make it work optimally bringing more joy into the lives of our clients. We design smart home and smart building solutions across lighting, shades, audio, video, and home security. Our North Jersey team delivers hands-on, high-quality installation and support for residential clients throughout the area, backed by the resources and reputation of a national brand. • Our Mission: To enhance the human experience through smart spaces., • Our Vision: To be the most beloved brand in technology service.Additional Information:, • We are a smoke, alcohol, and drug-free environment. This includes our buildings, vehicles, and job sites and/or when wearing our apparel., • We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionVeterinary Technician Certified or Experienced (Surgical & Dental Focus) Join a Team That Makes a Difference Every Day Animal Care of Oradell is a progressive, privately owned small animal veterinary hospital dedicated to delivering compassionate, high-quality care. We are seeking a Certified Veterinary Technician (CVT/LVT/RVT) or an experienced Veterinary Technician (minimum of two years in the field) to join our growing medical team. This position offers the opportunity to use your technical skills in a supportive, team-oriented environment with a strong emphasis on surgical and dental care. Certification is preferred, but candidates with proven hands-on experience in anesthesia, surgical support, and dentistry are encouraged to apply. Key Responsibilities As a vital member of our clinical team, you will: • Assist veterinarians with surgical procedures and anesthesia monitoring Perform dental cleanings and take dental radiographs Provide compassionate patient care and safe animal restraint Prepare patients for surgery and monitor recovery Administer medications and treatments as directed Collect and process lab samples • Communicate effectively with clients regarding patient care and follow-up, • Maintain accurate medical records and assist with inventory managementWhat We're Looking For Minimum of 2 years of veterinary technician or assistant experience Hands-on experience with anesthesia, surgery, and dental procedures Certification (CVT, LVT, or RVT) preferred but not required Strong communication and organizational skills Positive attitude, reliability, and a team-oriented mindset Compensation & Benefits • Hourly pay: $20.00 - $25.00 (based on skill, experience, and certification) Monthly performance bonuses • Continuing Education (CE) credits and professional development support Team-building events and a collaborative work culture Uniform allowance and tuition reimbursement Full Benefits Package Includes: 401(k) with employer match Medical, dental, and vision insurance Paid time off Employee pet care discounts Flexible scheduling Life insurance Why Animal Care of Oradell Since 2013, our practice has proudly served Oradell and surrounding communities with exceptional veterinary care. We value teamwork, respect, and a healthy work-life balance. Here, your skills and compassion make a real impact every day. How to Apply If you're a skilled veterinary professional looking to grow your career and work with a dedicated team in a positive environment, we'd love to meet you. Please submit your resume and a brief introduction for immediate consideration.

Job DescriptionDescription: Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when required Controls, Controls Interface & Automation • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system response Preventive Maintenance & Compliance • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and procedures Customer Service & Communication • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicable Leadership & Mentorship • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluations Administrative & Technology Responsibilities • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements: Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction) Experience • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferred Technical Skills • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagrams Physical Demands • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPE Work Environment • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noise Competencies & Attributes • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

\n ARMStaffing is seeking a travel Radiology Technician for a travel job in Englewood, New Jersey. Job Description & Requirements\n \n • Specialty: Radiology Technician\n, • Discipline: Allied Health Professional\n, • Start Date: 08/03/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n Night Shift Position Schedule\n This is a night shift position with the following schedule: \n \n • Friday: 3:00 PM - 7:00 AM\n, • Saturday: 11:00 PM - 7:00 AM\n, • Monday: 4:00 PM - 12:00 AM\n, • 1 additional shift as needed\n Job Description\n We are seeking a qualified candidate to fill a night shift position. The ideal applicant will have strong experience and a commitment to providing excellent patient care. Required Experience / Certifications / Licensure\n The following certifications are required for this position: \n \n • NJDEP\n, • AART\n, • BLS\n Why ARMStaffing?\n At ARMStaffing, we take care of our employees! We offer: \n \n • Health Benefits: Medical, Dental, Vision, Life, and more\n, • Onboarding Made Easy: We handle physicals, titers, and more so you can focus on care\n, • Clinical Support: In-house clinical team available to assist and advocate\n, • 401k Retirement Plan: Eligible after waiting period; 4% match with 5% contribution\n, • Recruiter Matching: Get paired with a recruiter based on your location and specialty\n, • Extras: Travel reimbursement, housing allowance, meals, referral bonuses, and more\n \n We're not the only ones who think ARMStaffing should be your first choice. Here’s why: \n \n • SIA’s Top-50 Fastest Growing Healthcare Staffing Firms – 2019\n, • SIA’s Largest Healthcare Staffing Agencies in the U.S. – 2023\n, • Top Workplace in the Lehigh Valley – 2022, 2023\n, • Perfect scores for 'Name, Not a Number' and 'Recruiters' Personalities' on Highway Hypodermics\n, • We've earned The Joint Commission’s Gold Seal of Approval for healthcare staffing 15 years strong and counting!\n \n Contract & local rates may vary based on location and applicant residency. Ask your ARMStaffing recruiter for details! \n \n ARMStaffing Job ID #37615455. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology:X-Ray,19:00:00-07:00:00 About ARMStaffing\n \n Allied Resources Medical Staffing (ARMStaffing) places the most qualified medical professionals in the industry, including: local and travel contract, temp-to-perm, per diem, and direct-hire personnel. \n As a leader in medical staffing, we cover every segment of the healthcare market and take pride in our ability to exceed our clients' expectations. We accomplish this through our total dedication to our clients and field associates, our over 15 years of experience, a strong and diverse poor of medical professionals, and the high level of loyalty of our internal staff. \n We also make it a point to develop and maintain close relationships with staffing and office managers to ensure clear communication and proper placements based on the client's criteria. This allows us to tailor our services to best suit the staffing needs of our clients, while placing our employees in positions that match their abilities and preferences. \n Our goal is to offer unparalleled service to our valued healthcare clients, regardless of facility size or location, and to maintain a top-notch workforce of qualified, dedicated and medical professionals. \n The Experts in Healthcare Recruiting \n \n • Local and travel contracts\n, • Temp-to-perm employment\n, • Direct-hire personnel\n, • Per Diem\n, • Staffing for every segment of the healthcare industry including, RNs, LPNs, and CNAs, and Allied Health Professionals\n, • Long-term contracts, block scheduling and per diem staffing options\n, • 24-Hour customer service and on-call support 365 days a year\n, • Full-time, registered nurse on staff to provide screening, background, and reference checks\n, • Long-term and temporary career options with outstanding employee benefits\n, • Medical Benefits\n, • Company-matched 401K\n \n \n \n

\n AMN Healthcare Allied is seeking a travel Mammography Technologist for a travel job in Belleville, New Jersey. Job Description & Requirements\n \n • Specialty: Mammography Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n Job Description & Requirements \n Mammography Tech - (Mam - Mammo Tech) \n StartDate: ASAP Available Shifts: 8 D Pay Rate: $3476.00 - $3582.00 \n Mammography Technologist job in Belleville, NJ: You must have Hologic Dimensions experience, at least 1 year of mammography experience, ARRT M certification, BLS certification, and a current NJ license. You will perform screening and diagnostic mammograms using Hologic Dimensions equipment at the facility, ensuring high-quality images and patient safety. The facility offers advanced imaging services and follows strict protocols for patient care and privacy. You should be skilled in positioning, compression, and image acquisition, and comfortable using electronic medical record (EMR) systems. Belleville, NJ offers a mix of urban charm and outdoor activities for your downtime. You can enjoy pocket parks, river walks, and explore the town’s rich history, including colonial sites and the Old Dutch Reformed Church. Branch Brook Park, partly owned by Belleville, is famous for its cherry blossoms and provides space for walking, tennis, and public art. The town features bowling at Bowlero, billiards at Guys & Dolls, and golf at Hendrick’s Field Golf Course. Belleville’s neighborhoods have unique shops, local restaurants, and seasonal events, making it easy to unwind and experience the community. AMN Healthcare offers excellent compensation, discounts and perks, dedicated recruiters and clinical support, and the AMN Passport app for 24/7 career management. Apply now to join this Travel Mammography Technologist assignment in Belleville, NJ. \n Required Qualifications \n Mammography Technologist, Mammography \n Experience: 1 year \n Licenses: MAMMO-NJ \n Certifications: M-American Registry of Radiologic Technologists \n References: 1 Reference in entire work history \n Mammo Techs require the following documentation upon submisson: \n o a copy of NJ license \n o a copy of current ARRT card \n o a copy of Mammography registry certificate (if no date on it, need ARRT documentation showing registry date) \n o 8 initial hours of digital training \n o 8 initial hours of tomosynthesis training \n o 15 current mammography CME's \n o Initial 40 hours of training/ attestation \n o Current 200 mammography stats \n Preferred Qualifications \n Experienced Traveler Job Benefits \n Allied travel assignments are typically for 13 weeks and offer generous packages that include: \n \n • Competitive pay rates\n, • Medical, Dental, Vision\n, • 401(k) and Flex Spending\n, • Life Insurance\n, • Accident and Short-term Disability Coverage\n, • Free Continuing Education\n, • Competitive Housing Deal\n, • Refer a friend and earn extra cash!\n \n \n About the Company\n \n At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable. \n \n \n mammography technician, mammography tech, mammogram technician, mammogram tech, mammography, mammographer, breast care, mammogram, allied health, allied\n \n AMN Healthcare Allied Job ID #3506043. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Mammography Tech - (Mam - Mammo Tech) About AMN Healthcare Allied\n \n AMN Healthcare is a leading force in the healthcare industry, committed to being the most trusted, innovative, and influential partner for healthcare organizations. With a focus on providing quality patient care, AMN Healthcare offers holistic solutions that reduce costs, streamline processes, and improve efficiencies. The company boasts over 30 years of experience and takes pride in staffing leading healthcare facilities with the nation's best travelers. As an industry leader, AMN Healthcare offers a diverse team dedicated to supporting healthcare workers and facilities, ensuring a personalized and supportive experience for both clients and candidates. \n \n Visit https://www.vivian.com/agencies/amn-healthcare-allied/ for more information. \n Benefits\n \n • Company provided housing options\n, • Medical benefits\n, • Dental benefits\n, • Continuing Education\n \n

Job Description Job Title: HVAC Technician Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automatio Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Aug 4, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset., • DOT certification, forklift experience, or welding background is a plus. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, competitive pay, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Time Off and Holidays. All Compactor Technicians are members of a Union, and benefits will be provided as outlined in the collective bargaining agreement. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off We are seeking an experienced Senior Home Technology Installer & Project Manager to lead residential audio, video, networking, smart home, and CCTV projects from pre-wire through final commissioning. This role is ideal for a highly skilled technician who is ready to take ownership of projects, lead field teams, interface with clients and builders, and ensure exceptional execution and customer satisfaction. This is a hands-on leadership role you will both manage projects and actively participate in installation and system configuration. Key Responsibilities Project Management • Lead residential AV, smart home, networking, and surveillance projects from kickoff to completion, • Review proposals, plans, and scope of work to ensure accurate execution, • Coordinate with homeowners, builders, electricians, and other trades, • Manage job timelines, labor allocation, and material procurement, • Conduct site walks and progress meetings, • Ensure projects are delivered on time, on budget, and to company standards Installation & Technical Execution • Perform and oversee pre-wiring, trim-out, and final installation, • Install and configure:, • Distributed audio systems (e.g., Sonos, Control4, etc.), • Home theaters and media rooms, • TV mounting and structured wiring, • Networking equipment (routers, switches, access points), • CCTV systems (IP cameras, NVRs, remote access setup), • Smart home systems (lighting control, automation, water monitoring, etc.), • Terminate, label, and test low-voltage wiring, • Rack build-out and clean cable management, • System programming and client handoff Leadership & Client Experience • Supervise and mentor junior technicians, • Maintain high installation standards and jobsite cleanliness, • Communicate clearly and professionally with clients, • Conduct system walkthroughs and training at project completion, • Support service department with escalated troubleshooting when needed Qualifications • 5+ years experience in residential AV, low-voltage, or smart home installation, • Proven experience managing projects and leading teams, • Strong knowledge of:, • Home networking fundamentals (IP addressing, VLANs, WiFi optimization), • Distributed audio/video systems, • CCTV systems and remote access configuration, • Structured wiring best practices, • Ability to read blueprints and wiring schematics, • Clean, organized rack-building and cable management skills, • Strong troubleshooting abilities, • Valid drivers license and clean driving record Preferred Certifications (not required but a plus): • Control4, Savant, or Crestron certification, • Networking certifications (Ubiquiti, Araknis, Cisco, etc.) What Were Looking For • A leader who takes ownership of projects, • Detail-oriented and quality-driven, • Calm under pressure and solutions-focused, • Professional and client-friendly, • Passionate about technology and staying current with industry trends Compensation & Benefits • Competitive salary based on experience, • Performance bonuses, • Company vehicle or vehicle allowance (if applicable), • Paid time off, • Ongoing training and certification opportunities, • Career growth into senior operations or technical leadership roles Why Join Us? We are not just installers we are long-term technology partners for our clients. This role offers the opportunity to lead high-end residential projects, work with cutting-edge technology, and be part of a company that values quality, service, and long-term relationships. If youre ready to step into a leadership role and build exceptional smart home experiences, wed love to hear from you.

Job Description We're seeking a Mobile Diesel Mechanic to join our team! In this role, you will be responsible for inspecting, diagnosing, repairing, and maintaining motorcoaches and other commercial vehicles at customer locations and in the field. This role performs advanced diagnostics and complex mechanical and electrical repairs while serving as a technical resource for customers and internal teams. The Mobile Diesel Technician operates independently from a company-provided mobile service vehicle, delivering high-quality service and support directly at customer locations. This position requires regular travel, including overnight travel as needed, to ensure timely response to customer needs while maintaining ABC's standards for safety, quality, and customer satisfaction. Benefits & Perks: At ABC Companies, we recognize that our employees are our greatest asset. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Retirement Plan, • Company-Paid Short-Term Disability Insurance, • Company-Paid Long-Term Disability Insurance, • Company-Paid Basic Life Insurance, • Voluntary Term Life Insurance, • Flexible Spending Accounts (FSA), • Hospital Indemnity Insurance, • Employee Assistance Program (EAP), • Paid Time Off (PTO), • Paid Holidays, • Training and Professional Development Opportunities, • Career Growth and Advancement Opportunities Benefits eligibility and offerings are subject to plan terms and company policies. Title: Mobile Diesel Technician Reports To: Shop Foreman Pay Rate: $45.00 - $60.00 / Hourly Responsibilities: • Inspect, diagnose, repair, and maintain motorcoaches, commercial and non-commercial vehicles, and other equipment as directed., • Perform advanced troubleshooting and diagnostics across mechanical, electrical, HVAC, and electronic vehicle systems., • Serve as a technical resource for Service Technicians I–III, assisting with complex repairs and problem resolution., • Assist shop leadership in troubleshooting difficult repairs and identifying root causes of recurring mechanical issues., • Ensure all repairs and diagnostic findings are accurately documented on work orders using shop computer systems and associated software., • Maintain and promote a safe, clean, and organized work environment and adhere to all company safety policies and procedures., • Maintain compliance with EPA, OSHA, DOT, and other applicable regulations., • Identify required parts and materials needed to complete repairs and communicate with parts personnel as needed., • Maintain accurate time and attendance reporting., • Continuously work to expand knowledge and maintain proficiency in emerging technologies, diagnostic tools, and repair techniques., • Demonstrate professionalism and uphold ABC’s core values at all times., • Other duties and responsibilities as assigned., • Perform diagnostics, repairs, maintenance, and field service work at customer locations utilizing a company-provided mobile service vehicle., • Maintain professional customer relationships while representing ABC Companies at customer facilities and job sites., • Travel regularly, including overnight travel, to support customers throughout the assigned service territory., • Maintain mobile service vehicle inventory, tools, equipment, and parts required to perform field repairs safely and efficiently. Qualifications: • 10+ years of motorcoach or heavy commercial vehicle service experience required., • Experience with heavy-duty diesel equipment strongly preferred, including tractor/trailer, heavy machinery, or material handling equipment., • High-voltage / electric vehicle (EV) experience highly valued. Candidates with significant EV experience may be considered with slightly less coach-specific experience., • Previous shop lead or senior technician experience preferred, but not required., • Demonstrated ability to perform advanced troubleshooting and diagnostics across complex mechanical, electrical, HVAC, and electronic vehicle systems., • Proven ability to serve as a technical resource for other technicians and providing guidance., • Experience performing root cause analysis and advanced diagnostics to resolve recurring mechanical or system issues., • Must possess the tools necessary to complete assigned responsibilities., • Experience with body and frame repairs and interior component repair and replacement., • Audio/Video systems knowledge preferred but not required., • EPA refrigerant certification required or ability to obtain within 30 days., • Computer proficiency required, including Microsoft Office, service writing systems, work order tracking, and shop software., • Valid driver’s license required. CDL Class B with passenger endorsement preferred., • Relevant certifications (ASE, Cummins, Detroit, Allison, etc.) preferred., • Ability and willingness to travel extensively, including overnight travel as required., • Comfortable working independently at customer locations and remote job sites utilizing a mobile service vehicle., • Demonstrated ability to manage field service responsibilities with minimal supervision while maintaining a high level of customer service. Apply today!

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description What to expect as a Commercial Security Installation Technician III: • Assist the Project Manager regarding on-site scheduling of work activities and timely delivery of equipment, • Responsible for the connection of control panels, application requirements, wire concealment, and security software installation, • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Troubleshoot new installations to ensure the systems are functioning properly and satisfy codes, • Demonstrate Allied Universal’s core values as a highly skilled leader on the Installation Team, • Supervise several teams comprised of Security Installation Technician I’s and II’s, • Manage several medium- to large-sized jobs simultaneously, doing so within approved hours and margin tolerances, • Drive to client sites with a company-issued vehicle to perform the system installation and confirm the system is operating effectively and meets contract requirements, • Installation of electrical wiring, panels, cables, and security devices, • Completes miscellaneous tasks as assigned by manager What knowledge and skills are required: • A high school diploma or equivalent is required, • Minimum 2-3 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, programming systems, and running medium- to large-sized jobs, are required, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possess or have the ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal and external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to be on-call on a rotational basis, • Must be detail-oriented and organized Must possess a valid driver’s license with at least one year of driving experience, a clean driving record (no major violations within the last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by company policy, and the ability to safely operate a vehicle. • Ability to complete time entry from home on a daily basis via the Internet, • Ability to deliver product familiarization training to end-users, • Strong proficiency in Microsoft Office products (Word, Excel, and Project), • Ability and track record of successfully loading servers with third-party applications and deploying IP video solutions, • Possess general working knowledge of network architecture, • Overnight travel may be required on an as-need basis BENEFITS: • Salary range: $35 - $45 hourly, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1630291

Job Description As an HVAC Service Manager, you will be responsible for overseeing and coordinating our service department to ensure the efficient and effective delivery of HVAC services. You will play a pivotal role in managing service technicians, assisting the dispatcher with scheduling, coordinating installations, and maintaining high standards of customer service. Key Responsibilities: • Manage a team of HVAC service technicians, providing leadership, guidance, and support to ensure optimal performance and productivity., • Assist the dispatcher with scheduling service technicians to customer locations for repair, maintenance, and installation jobs in a timely and efficient manner., • Monitor and prioritize service requests, ensuring that customer needs are met promptly and effectively., • Locate and order parts as needed for field staff., • Research and locate service manuals or troubleshooting instruction for a variety of equipment as needed. You will communicate with the field technicians directly and assist them as needed from the office., • Conduct regular performance evaluations of service technicians, providing feedback and coaching to enhance skill levels and job performance., • Oversee the implementation of safety protocols and ensure compliance with industry regulations and company policies., • Handle customer inquiries, complaints, and escalations, resolving issues promptly and professionally to ensure customer satisfaction., • Check technician notes for accuracy at the end of the day and directly communicate with field staff to ensure jobs are properly completed., • Develop and implement process improvements to enhance the efficiency and effectiveness of service operations. Qualifications: • Proven experience in HVAC service management, with a minimum of 3 years of experience in a similar role., • Strong technical knowledge of HVAC systems, including troubleshooting, repair, and installation procedures., • Excellent leadership and communication skills, with the ability to motivate and inspire a team., • Proficiency in computer software applications, including Microsoft Office and HVAC service management software., • Solid understanding of safety regulations and protocols related to HVAC service operations., • Exceptional customer service skills, with a commitment to delivering a positive customer experience., • Valid driver's license and clean driving record. HVAC certification or relevant trade qualifications preferred. Job Type: Full-time Pay: $50,000.00 - $130,000.00 per year Benefits: • 401(k) 4% Match, • Company truck, • Paid time off, • Tools provided Schedule: • 8 hour shift, • Monday to Friday, • Overtime, • Weekends as needed, • Year round work Supplemental pay types: • Overtime pay Work Location: In person

Job Description Job Title: Systems Specialist Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automatio Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Jul 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Laboratory Technician Title: Laboratory Technician Location: Secaucus, NJ Reports to: Laboratory Manager Per diem Frontage Laboratories Inc. is an award winning, publicly listed (HKSE), full-service CRO/Contract Research Organization operating over 25 state-of-the-art laboratories across the US, Canada and China, and growing over 30% YOY. Our core competencies include drug metabolism, pharmacokinetics/ pharmacodynamics (PK/PD), safety and toxicology, bioanalytical services, chemistry and manufacturing controls for drug development, and core laboratory services for clinical trials. Position/Job Summary: The laboratory technician performs a variety of laboratory procedures as required by the study protocol. Laboratory technicians are responsible for assisting the Laboratory Manager, Principal Investigator, Clinical Research Coordinators, and other medical professionals in the preparation and handling of specimens, analyzing results, and maintaining laboratory equipment. Laboratory Technicians ensure accuracy, quality control, and adherence to safety protocols, contributing directly to scientific research, development of new products, or medical diagnostics. Roles & Responsibilities: • Performs routine laboratory procedures including specimen labeling, collection, processing, and shipping in accordance with established SOPs and/or study protocol under the supervision of the Laboratory Manager, Clinical Research Coordinator, Principal Investigator, and Sub-Investigators., • Operate and maintain laboratory equipment such as centrifuges, pipettes, and refrigerators/freezers., • Develop a strong working knowledge of the study protocols and flow chart of study procedures and implement study procedures in full compliance with protocol requirements., • Maintain accurate and timely documentation in laboratory or study-specific documents, temperature logs, and shipping logs., • Perform environmental monitoring and equipment temperature checks to ensure proper specimen storage conditions., • Assist with inventory management, restocking supplies, and maintaining organized work areas., • Ensure compliance with safety, quality, and regulatory standards (GCP and internal QA procedures)., • Support weekend and surge workload coverage as needed based on operational demands., • Assist Laboratory Manager in any task as needed. Education, Experience & Skills Required: • Associate or BS in biology, chemistry, or related area, or completion and certification of Lab Technician course from an accredited or allied health training school., • 1 year of experience in clinical research laboratory or related medical field., • Proficiency in laboratory techniques and laboratory equipment operation., • Good communication skills., • Excellent organization and planning skills. Salary: $18-$22/hour Frontage Laboratories Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET IV/Resident Engineer Certified Professional with expertise of managing heavy highway / bridge construction projects, and a construction inspection team. This professional will be responsible for the project record keeping, correspondence, compiling, reviewing, and delivery of required daily inspection reports. The ideal candidate will chair various project meetings, record and prepare and distribute accurate meeting minutes. This individual will need to be well experienced in bridges, highways and have an extensive background in construction especially with clients such as NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Resident Engineer, providing extensive inspection and management of construction project and serve as the Client’s liaison with the Contractor. The RE shall be capable of managing a 3+ CM/CI staff, possess strong communication, computer, and writing skills and be experienced with CPM Scheduling, • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work with client to inform public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Manage all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Bachelor’s degree in civil engineering or construction management, • Minimum of 8 years of experience with 3+ years of experience on projects $10M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • Licensed professional engineer or NICET 4 Highway Construction Inspection required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has supervisory responsibility. The RE shall be capable of managing a 3+ CM/CI staff PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $94,000 - $122,200. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer. #LI-KS1

Job DescriptionLevel Up Your IT Career at 360 Networks! Are you an MSP pro ready to tackle complex IT challenges? At 360 Networks, we’re not just another IT company we’re a fast-growing, collaborative team where your skills are valued, your ideas make an impact, and your work directly drives client success. Benefits That Actually Matter: Healthcare costs are no joke, so we make sure you’re covered. We offer industry-leading medical plans with strong employer contributions, paid time off, professional development opportunities, and more helping you focus on IT, not your wallet. At 360 Networks, your career growth and well-being are top priorities. Healthcare You Can Count On: We offer Horizon Blue Cross Blue Shield of New Jersey medical coverage with a low $1,500 deductible real protection that helps keep medical costs down and protects you and your family. 401(k) You’ll Want to Use: Secure your future with our Fidelity Investments 401(k) plan with up to a 4% employer match we help you build retirement savings, not just pay your bills. Time Off & Growth Support: Paid time off + professional development assistance means you recharge, level up your skills, and avoid burnout because great talent thrives when supported. Low Voltage Cabling & CCTV Technician / Installer New JerseyWe are a security integration company serving the NJ/NY area, and we're looking for an experienced Field Technician to join our growing team. If you take pride in clean installs, solid troubleshooting, and showing up ready to work, we want to hear from you. What You'll Be DoingYou'll be out in the field installing structured cabling, camera systems, TVs, and access control systems for our commercial clients across New Jersey and New York. Every day looks a little different and that's part of what makes this role great. What We're Looking For: • 3+ years of hands-on experience installing low-voltage cabling, IP Cameras systems, and TVs., • Computer-literate and comfortable working with technology., • Mechanically inclined with strong knowledge of tools and equipment., • Solid troubleshooting skills you can diagnose problems and get things working., • Valid driver's license with a clean driving record., • Experience with access control systems is a plus. What We Offer: • Company vehicle provided to job sites., • Vacation and sick time., • Overtime opportunities., • Compensation based on experience.

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • Work Zone Safety The employee may also be required to accrue and/ or renew the following certifications at the discretion of the Department Head after the date of hire • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job DescriptionEnvironmental Technician III / Team Lead • 105 Jacobus Ave, Kearny, NJ 07032, USA Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Pay range: $ 26-31/hour DOE Hours: Hours can be 8-430 or 9-530 Job Description:The Environmental Technician III is a key position in supervising that the details of everyday production are executed through effective communications within the team and outside teams, departments, etc. Primary Responsibilities (Essential Functions): • Supervise segregation and packaging material for process along with the completion of required paperwork in a legible, accurate, and timely manner in accordance with appropriate regulations and Clean Earth policies, practices, and procedures., • Separate and pack hazardous material for transport., • Complete required paperwork in accordance with our practices and procedures., • Collecting samples of inbound waste for laboratory analysis., • Performs other reasonably related duties as assigned by management. Qualifications: • Ability to wear company provided personal protection equipment including eye protection, steel toed shoes, hard hat, gloves, Tyvek coveralls, and respirator., • Must be 18 years of age or older., • 2+ years of prior experience working with hazardous materials., • Have the ability to read, write and speak in English., • Ability to operate equipment, including a forklift and pallet jack, • High School diploma or General Educational Development (GED) required. Preferred Qualifications: • 2+ years of experience sampling and receiving hazardous waste., • Has the ability to operate a powered industrial truck, e.g., forklift and possesses safe driving record., • Proficiency with Windows based programs (i.e. Excel and Word)., • Demonstrates knowledge of Hazardous Materials and OSHA Regulations., • Knowledge of OSHA, DOT, and RCRA Regulations., • Bachelor’s degree in chemistry, Environmental Science, Biology or related field. Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law

Job DescriptionWhy Join Us? Competitive pay $22–$28/hr Flexible scheduling Health, dental, and vision benefits (for eligible employees) Ongoing training & supervision from experienced BCBAs About the Role As a Behavior Technician (BT/RBT), you’ll work directly with children with autism, providing 1:1 Applied Behavior Analysis (ABA) therapy in homes. You’ll help kids build communication, social, and independence skills while receiving hands-on training and mentorship. What You’ll Do Provide direct ABA therapy to children with autism (training provided) Collect data on treatment goals during each session Collaborate with a supervising BCBA to implement behavior plans Support families by sharing strategies and progress updates Requirements High school diploma (college coursework in psychology, education, or related field a plus. Reliable transportation Availability for after-school hours and/or weekends preferred Experience and passion for helping children and families Schedule Part-time Flexible shifts, mostly afternoons/evenings INDRBT

Job DescriptionCompany Description VERSANT (Nasdaq: VSNT) is an industry-changing media and entertainment business and home to trusted brands that shape culture, inform audiences, and build lasting connections. It operates across four core markets: political news and opinion, business news and personal finance, golf, and sports and genre entertainment. These markets are served through a powerful portfolio of iconic and innovative brands, including CNBC, MS NOW, USA Network, Golf Channel, Oxygen, E!, SYFY, and Versant's sports division USA Sports, along with complementary digital assets including Fandango, Rotten Tomatoes, GolfNow and GolfPass. Job Description Versant, located in Englewood Cliffs, NJ, is home to a Media Operations Center (MOC) team comprised of innovative and highly skilled professionals who oversee the acquisition, preparation, quality control, and distribution of content across Versant's media platforms. Operating in a 24/7 environment, the MOC team ensures the reliable delivery of content to linear broadcast networks, digital platforms, and distribution partners. The team is responsible for sourcing, preparing, processing, and fulfilling media assets while maintaining the highest standards of operational excellence, reliability, and service quality. The Media Operations Specialist is a senior individual contributor responsible for supporting all aspects of the media supply chain, including content ingest, quality control, transcoding, metadata management, asset preparation, first-party ad processing, and content distribution. In addition to executing operational workflows, this role serves as a key escalation point for technicians, supports training initiatives, contributes to process improvements, and collaborates closely with cross-functional teams to maintain operational excellence. This position reports directly to the MOC Manager. Responsibilities Responsibilities include, but are not limited to: • Execute Media Operations Technician workflows accurately and efficiently while adhering to established service-level agreements and operational standards., • Perform content quality control (QC), transcoding, editing, metadata validation, asset preparation, and content distribution activities., • Serve as a primary escalation point for Media Operations Technicians and partner departments regarding operational issues and workflow exceptions., • Collaborate with Technical Operations, Commercial Operations, Program Operations, On-Air Operations, Engineering, and other stakeholders to ensure the successful fulfillment and delivery of media assets., • Troubleshoot and resolve urgent operational issues in real time while identifying root causes and implementing preventative solutions., • Assist with departmental training initiatives, including onboarding new team members and supporting the rollout of new workflows, systems, and procedures., • Support testing, implementation, and validation of new technologies, systems, and operational processes., • Create, publish, maintain, and improve Standard Operating Procedures (SOPs) and workflow documentation., • Identify opportunities to improve operational efficiency, workflow effectiveness, and service reliability., • Participate in incident response and resolution activities to maintain departmental goals for reliability and availability., • Maintain the department's commitment to achieving and exceeding operational reliability and service-level objectives.Qualifications Qualifications Required Qualifications • Minimum of 10 years of experience in a broadcast, post-production, media operations, or related technical media environment., • Minimum of 10 years of experience performing transcoding, quality control, and fulfillment functions for broadcast or digital media workflows., • Experience using file-based quality control tools such as Baton or similar platforms., • Experience working with media asset management (MAM), workflow orchestration, and metadata management systems., • Demonstrated track record of meeting or exceeding performance expectations., • Strong attention to detail and ability to maintain accuracy in a fast-paced operational environment., • Strong verbal and written communication skills, with the ability to collaborate effectively across technical and non-technical teams., • Proven problem-solving skills and ability to perform under pressure during time-sensitive operational events. Preferred Qualifications • Bachelor's degree in Broadcast Engineering, Media Technology, Communications, Information Technology, or a related field, or equivalent professional experience., • Knowledge of waveform monitors, vectorscopes, audio measurement standards, and quality control best practices., • Knowledge of digital video formats, codecs, file delivery standards, and industry-standard media processing tools., • Experience with media asset management systems, workflow automation platforms, and content distribution technologies., • Understanding of digital broadcast, production, and media supply chain workflows., • Experience with platforms such as Baton, Vantage, Dalet, Avid, Harmonic, Imagine, or similar media operations systems., • Demonstrated ability to quickly learn proprietary and third-party software applications., • Highly detail-oriented with strong organizational and collaboration skills., • Demonstrated ability to manage multiple priorities and deadlines in a dynamic operational environment., • Commitment to continuous learning and adapting to new technologies and workflows. Additional Requirements • Must be willing to work onsite in Englewood Cliffs, NJ., • Must be willing to work a schedule that may include evenings, overnights, weekends, and holidays as part of a 24/7 operation., • Must be 18 years of age or older., • Must have unrestricted work authorization in the United States., • Must be willing to submit to a background investigation., • Must apply through the designated company career portal to be considered. Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to candidateaccessibility@versantmedia.com. VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job Description Job Title: Systems Specialist Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automatio Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Aug 4, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Interface with existing key company stakeholders, to grow business including Automation Specialist, Hydraulic Specialist, Pneumatic Specialist, Field Service Technicians. Qualifications: • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas., • Must be a U.S. citizen or legally authorized to work in the United States We offer comprehensive medical and dental plans, vacation days, sick days and a diverse 401k selection with Company matching. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job DescriptionBenefits: • Bonus based on performance, • Health insurance, • Training & development We are a security Integrator serving NJ/NY area. We are seeking a field technician to install cable networks, CCTV, and access control systems. Applicant must have at least 1 year of experience installing security cameras or access control readers and locks. Applicant should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills. There are overtime and year-end bonuses. We provide a company vehicle to go to job sites, medical benefits, Aflac options, pension plan, vacation/sick time. Must have a valid and clean driver's license. Compensation depends on experience. A resume must be sent to be considered.

Job Description RVE (an Ardurra company) is seeking a Construction Inspection Manager to join our team in Secaucus, New Jersey. Our Construction Inspection team provides comprehensive oversight and technical expertise to help clients successfully deliver infrastructure and capital improvement projects from pre-construction through completion. Serving as trusted partners and owner's representatives, our professionals ensure projects remain compliant with contract requirements, regulatory standards, schedules, and quality expectations while protecting our clients' interests throughout every phase of construction. Our multidisciplinary team includes licensed Professional Engineers and NICET-certified Resident Engineers with specialized certifications in concrete inspection, corrosion protection, asphalt technologies, and traffic control. Supporting projects across transportation, water, wastewater, municipal, and land development markets, we provide resident engineering, construction inspection, contract and grant administration, and program management services to help clients minimize risk, maintain quality, and deliver successful projects on time and within budget. Primary Function: The Construction Inspection Manager is a proven team leader in the construction field and has over 15 years of experience in Civil and Infrastructure construction projects. The individual’s experience should be in overseeing and managing both projects and a team of construction inspectors and contract administrators. This position is a supervisory and construction management role and will be directly responsible for all construction operations for the Secaucus Regional Office. This individual will manage and supervise a staff of construction inspectors and will collaborate with engineering project managers and administrative staff. This position will report directly to the Regional Manager. Supervised staff shall be responsible for successful inspection and contract administration of a diverse variety of projects. Such projects shall include the rehabilitation and replacement of municipal roads, underground utilities (drainage, sanitary sewer systems, combined sewer systems, potable water systems), park and recreational facilities, private land development. This individual will also collaborate with other company inspection managers for occasional overlap with water/wastewater projects and vertical/building projects. Primary Duties: • Design to construction phase transition coordination with design team including constructability reviews during design phase and assumption of project responsibility from preconstruction conference through project close-out., • Responsible for project construction phase planning, staff assignments, coordination with other departments and offices to balance dynamic construction scheduling needs (resource planning) and hiring., • Continued quality control of all payment certifications., • Lead and promote daily communication across Inspection teams and timely communication with design team and clients as needed, • Identify, scope and administer field changes for unforeseen conditions including change order cost and schedule negotiation, • Implement staff development protocols, including skills training and certifications, • Application and enforcement of company policies, • This is a full-time supervisory position of a construction inspection team Education and Experience Requirements: • Two-year technical or associate’s degree in construction technology or construction management are a plus., • Bachelor’s Degree a plus, • Excellent oral and written communication skills, • Proven leadership capabilities, • Strong organizational and time management skills, • Proficient with inspection software, Microsoft Office Suite and related programs, • OSHA Certifications 10/30 preferred, • NICET Certifications I, II, III preferred, • ACI - Field Technician Certification preferred, • New Jersey Society of Asphalt Technicians - Field Testing preferred, • NJDOT - Traffic Control Coordinator preferred, • Work Zone Safety preferred, • Confined Space Training preferred Salary Range: The salary range for this role is $94,000 - $122,200 annually. Benefits: Medical, dental, vision, 401(k), Paid Time Off Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HM1

Job DescriptionAbout Kinder Growth At Kinder Growth, we are dedicated to helping children with autism build meaningful, strong, and joyful relationships with those around them. We support each child in unlocking their potential, bringing forth a happier, more engaged child. We take tremendous pride in our collaborative and supportive work environment. Employee happiness, professional growth, and open communication are the pillars of our team culture. We know that when our staff thrives, so do the families we serve. Start your journey with us today! Job Highlights Job Type: Part-time Schedule: Flexible (primarily weekday afternoons & evenings, plus optional weekends) Pay: Competitive hourly rate Location: In-home sessions (clients matched within 30 minutes of your location) Caseload: Build gradually to fit your availability Responsibilities Provide playful, 1:1 DIRFloortime therapy to autistic children Build strong, trusting relationships through emotionally attuned play Collect light session data using your phone or tablet Collaborate with and receive ongoing support from credentialed supervisors Requirements: Reliable transportation Ability to engage physically with children (e.g., playing on the floor) Working phone or tablet to collect session data Ability to pass Federal and State background checks Valid form of ID Preferred: Bachelor's degree in a related field (education, psychology, child development, etc.) Preferred: Bilingual (Spanish-English) Preferred: Experience with the DIRFloortime® model Experience (1+ year required) Childcare (babysitting, daycare, preschool teacher, assistant teacher) Special education (educational settings, special needs) Developmental intervention (early intervention) Autism interventions (RBT/Behavioral technician, autism support specialist, ABA therapist, other DIRFloortime experience Benefits Flexible hours — build a schedule that fits your life No long commutes — clients matched within your area Paid mileage between client sessions Weekly mentorship and supervision DIRFloortime training reimbursement Growth opportunities in a dynamic and rewarding field Health insurance available for full-time employees Schedule We ask each employee and family to commit to a minimum of 10 hours per week, with sessions typically lasting 2–3 hours per day. Most sessions take place after school (between 3–8 PM on weekdays) and anytime on weekends. Apply today and help us bring joy and growth to children through play!

Job Description Electrical BIM Technician / Electrical CAD Designer Location: Lyndhurst, NJ Job Type: Full-Time or Part-Time Compensation: Competitive pay based on experience Join a Growing Construction Technology Company Elite CAD Designs is seeking an experienced Electrical BIM Technician / CAD Designer to join our growing team. We are looking for an individual with strong electrical construction knowledge who can transform design intent into accurate, constructible models and installation drawings. This position is ideal for someone with commercial electrical installation experience, electrical drafting experience, or both. Electricians looking to transition from the field into an office environment are encouraged to apply. At Elite CAD Designs, we specialize in Building Information Modeling (BIM), MEP coordination, prefabrication drawing production, Reality Capture, laser scanning, and Digital Twin solutions for commercial construction projects throughout the United States. Responsibilities • Produce detailed electrical shop drawings and installation drawings., • Develop and maintain electrical BIM models using Revit and AutoCAD., • Create coordinated 3D models for commercial construction projects., • Participate in BIM coordination and clash detection with mechanical, plumbing, fire protection, structural, and architectural trades., • Review engineering drawings and identify constructability issues before installation., • Assist with prefabrication and fabrication drawing production., • Coordinate with project managers, field personnel, contractors, and clients., • Maintain organized project documentation and ensure drawing accuracy throughout project execution. Qualifications • Commercial electrical installation experience and/or electrical drafting experience preferred., • Ability to read and interpret construction documents required., • Strong understanding of commercial electrical systems required., • Excellent communication and organizational skills., • Ability to work independently while contributing to a collaborative team environment., • Strong attention to detail and commitment to quality., • Additional experience in Mechanical, Plumbing, Fire Protection, or other MEP trades is highly desirable., • OSHA 10 or OSHA 30 certification is a plus but not required. Preferred Experience with one or more of the following: • AutoCAD, • Revit, • AutoCAD MEP, • Navisworks, • Revisto, • Autodesk Forma, • Bluebeam What We Offer • Competitive compensation based on experience., • Opportunities for career advancement., • Ongoing training in BIM, VDC, Reality Capture, and emerging construction technologies., • Exposure to large-scale commercial, healthcare, education, industrial, and infrastructure projects., • Collaborative and professional work environment., • Stable, long-term employment with a growing technology-driven company.

Job Description Are you an experienced medium/heavy truck technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything diesel? Do you ever ask yourself "I wish I had the opportunity to be a leader"? If so, we have an exciting opportunity for you to become an Instructor at Universal Technical Institute! Never taught? No problem! If you have the drive, patience, and skills we'll train you! You’ve come this far to become an amazing technician…why don’t you take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Diesel Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern diesel technology. What We Offer: • $36 - $40 per hour with opportunity for OT, • Weekends OFF, • Paid Training, • FREE Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K, Paid Holidays, Paid Time Off, • State of the Art Tools and Equipment Responsibilities, • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for diesel mechanics while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing diesel engines., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Safety First: Instill the importance of safety procedures and best practices to ensure a secure working environment for students. Qualifications, • High school diploma or GED, • Experience: 4 years of practical work experience, within the last 10 years in the field, • Certifications: ASEs are highly valued!, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff, • Patience and Empathy: A patient and empathetic approach to teaching, understanding that every student learns at their own pace About Us: It’s all about the reputation. 55+ years of experience, trusted by 35+ industry leading brands, 16 campuses, 5 technical schools. But it’s not all about the numbers. Here at Universal Technical Institute and its family of schools, we care about YOU. We care about making a change in the lives of our employees and our students. We’re on a mission to expand our reach and increase our impact, one life at a time and that starts with yours…Come and be a part of our legacy! You should be proficient in: • Electrical Systems Diagnostics & Repair, • Diesel Engine Systems, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Performance, • Service, • Diesel & Heavy Equipment Systems, • Electrical Systems & Diagnostics (Heavy Equipment)

Job DescriptionAbout Kinder Growth At Kinder Growth, we are dedicated to helping children with autism build meaningful, strong, and joyful relationships with those around them. We support each child in unlocking their potential, bringing forth a happier, more engaged child. We take tremendous pride in our collaborative and supportive work environment. Employee happiness, professional growth, and open communication are the pillars of our team culture. We know that when our staff thrives, so do the families we serve. Start your journey with us today! Job Highlights Job Type: Part-time Schedule: Flexible (primarily weekday afternoons & evenings, plus optional weekends) Pay: Competitive hourly rate Location: In-home sessions (clients matched within 30 minutes of your location) Caseload: Build gradually to fit your availability Responsibilities Provide playful, 1:1 DIRFloortime therapy to autistic children Build strong, trusting relationships through emotionally attuned play Collect light session data using your phone or tablet Collaborate with and receive ongoing support from credentialed supervisors Requirements: Reliable transportation Ability to engage physically with children (e.g., playing on the floor) Working phone or tablet to collect session data Ability to pass Federal and State background checks Valid form of ID Preferred: Bachelor's degree in a related field (education, psychology, child development, etc.) Preferred: Bilingual (Spanish-English) Preferred: Experience with the DIRFloortime® model Experience (1+ year required) Childcare (babysitting, daycare, preschool teacher, assistant teacher) Special education (educational settings, special needs) Developmental intervention (early intervention) Autism interventions (RBT/Behavioral technician, autism support specialist, ABA therapist, other DIRFloortime experience Benefits Flexible hours — build a schedule that fits your life No long commutes — clients matched within your area Paid mileage between client sessions Weekly mentorship and supervision DIRFloortime training reimbursement Growth opportunities in a dynamic and rewarding field Health insurance available for full-time employees Schedule We ask each employee and family to commit to a minimum of 10 hours per week, with sessions typically lasting 2–3 hours per day. Most sessions take place after school (between 3–8 PM on weekdays) and anytime on weekends. Apply today and help us bring joy and growth to children through play!

Job DescriptionAbout Kinder Growth At Kinder Growth, we are dedicated to helping children with autism build meaningful, strong, and joyful relationships with those around them. We support each child in unlocking their potential, bringing forth a happier, more engaged child. We take tremendous pride in our collaborative and supportive work environment. Employee happiness, professional growth, and open communication are the pillars of our team culture. We know that when our staff thrives, so do the families we serve. Start your journey with us today! Job Highlights Job Type: Part-time Schedule: Flexible (primarily weekday afternoons & evenings, plus optional weekends) Pay: Competitive hourly rate Location: In-home sessions (clients matched within 30 minutes of your location) Caseload: Build gradually to fit your availability Responsibilities Provide playful, 1:1 DIRFloortime therapy to autistic children Build strong, trusting relationships through emotionally attuned play Collect light session data using your phone or tablet Collaborate with and receive ongoing support from credentialed supervisors Requirements: Reliable transportation Ability to engage physically with children (e.g., playing on the floor) Working phone or tablet to collect session data Ability to pass Federal and State background checks Valid form of ID Preferred: Bachelor's degree in a related field (education, psychology, child development, etc.) Preferred: Bilingual (Spanish-English) Preferred: Experience with the DIRFloortime® model Experience (1+ year required) Childcare (babysitting, daycare, preschool teacher, assistant teacher) Special education (educational settings, special needs) Developmental intervention (early intervention) Autism interventions (RBT/Behavioral technician, autism support specialist, ABA therapist, other DIRFloortime experience Benefits Flexible hours — build a schedule that fits your life No long commutes — clients matched within your area Paid mileage between client sessions Weekly mentorship and supervision DIRFloortime training reimbursement Growth opportunities in a dynamic and rewarding field Health insurance available for full-time employees Schedule We ask each employee and family to commit to a minimum of 10 hours per week, with sessions typically lasting 2–3 hours per day. Most sessions take place after school (between 3–8 PM on weekdays) and anytime on weekends. Apply today and help us bring joy and growth to children through play!

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal® is hiring an Engineering Manager. The Engineering Manager leads pre‑ and post‑field support engineering teams across system design, project delivery, and operational support. Serving as the primary customer-facing technical escalation, this role ensures on-time, compliant project execution while providing strong people leadership and fostering effective cross‑functional and client partnerships. RESPONSIBILITIES: • Manage, mentor and schedule a small team of field support pre and post engineers, handle performance reviews, career development and resource allocation., • Coordinate with Installation teams on the execution and delivery of infrastructure and systems projects across network, video, database and security domains (physical security, access control, CCTV, intrusion detection, and logical/security appliances)., • Supervise the quoting, RFI, RFP and engineering RFC processes for all projects, encompassing technical documents, drawings, scopes of work, and specifications; ensures compliance with the requirements of the prime contract and meets company standard processes, • Develop and maintain project plans, budgets, milestones, and technical requirements; coordinate with third-party vendors, integrators and contractors as needed., • Maintain documentation: runbooks, SOPs, topology, security diagrams, change logs and project deliverables., • Act as customer-facing technical lead for outages, escalations and project status — communicate progress, risks, mitigation plans and timelines to stakeholders and clients., • Review system design and component compatibility; exercise cost analysis procedures and value engineering for components in the project, creating opportunities for cost reduction and margin increases QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of five (5) years of management or supervisory experience, • Minimum of five (5) years hands-on experience with servers and enterprise network infrastructure with three (3) years managing projects or teams, • Extensive experience with relational databases (e.g., MySQL, PostgreSQL, MS SQL) including performance tuning, backup/recovery and HA, • Strong customer-facing experience, including presenting technical content to non-technical stakeholders and managing clear, timely incident communications, • Demonstrated project management capability, including managing multiple projects while overseeing schedules, risks, scope, and vendor deliverables, • Ability to manage competing priorities in a dynamic, team-oriented environment while developing trusted, collaborative relationships across internal teams, vendors, and executive-level clients PREFERRED QUALIFICATIONS (NICE TO HAVE): • Bachelor’s degree in computer science, Information Technology or related field, • Supervisory experience in construction or operations, • PMP, PRINCE2, or equivalent project management certification, • Network certifications (CCNA/CCNP/CCDA), security certifications (CISSP, CISM, CompTIA Security+), database certifications (Oracle, Microsoft, PostgreSQL) and/or AV certifications (CTS)., • Experience with cloud networking, cloud-hosted databases and cloud security (AWS, Azure, GCP), • Experience with ITSM/incident management tools (ServiceNow, Jira) and various physical security integration platforms BENEFITS: • Salary: $100,00 - $125,000 annually + 12% bonus potential, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1632963

Job Description RVE an Ardurra company is seeking a water/wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input after the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail Education and Experience Requirements: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • Work Zone Safety The employee may also be required to accrue and/ or renew the following certifications at the discretion of the Department Head after the date of hire • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. Documents. The role also involves reviewing plans, monitoring construction progress, promoting observance of building codes, and serving as a liaison among contractors, project managers, regulatory agencies, and the community. The Inspector supports project documentation, reporting, and issu

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job DescriptionNow Hiring: Full-Time Industrial Electro-Mechanical Technician Join our growing team as an Industrial Electro-Mechanical Technician and play a vital role in keeping our production facility operating safely and efficiently. We are seeking a skilled, hands-on maintenance professional with strong mechanical and electrical troubleshooting abilities who enjoys working in a fast-paced industrial environment. This is a full-time position with a regular schedule of 40+ hours per week, including opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You'll Do As an Industrial Electro-Mechanical Technician, you'll be responsible for maintaining, troubleshooting, repairing, and optimizing the equipment that keeps our industrial laundry operation running at peak performance. You'll perform preventive maintenance, diagnose mechanical and electrical issues, and respond quickly to equipment breakdowns to minimize downtime. You'll work on a variety of industrial systems and equipment, including: • Industrial washers and dryers, • Ironers and finishing equipment, • Conveyor systems, • Boilers and steam systems, • Air compressors, • Electrical, mechanical, pneumatic, and hydraulic systems Your expertise will help maximize equipment reliability, improve operational efficiency, and support a safe, productive work environment. What You'll DoKey Responsibilities • Diagnose and Repair Equipment: Troubleshoot and repair electrical, mechanical, pneumatic, hydraulic, and steam systems. Identify root causes of equipment failures and perform corrective repairs with minimal supervision., • Electrical & Controls: Read and interpret electrical schematics, wiring diagrams, and ladder logic. Install, troubleshoot, and maintain electrical systems and control wiring up to 480V three-phase. Perform maintenance on motors, motor controls, VFDs, PLCs, sensors, and electrical circuits., • Preventive Maintenance: Perform scheduled preventive and predictive maintenance on industrial washers, dryers, ironers, conveyors, boilers, air compressors, pumps, motors, PLC-controlled equipment, and other production machinery to maximize equipment reliability., • Industrial Systems: Maintain and troubleshoot pneumatic, hydraulic, compressed air, steam, and boiler systems. Repair and replace various water and air pumps, valves, cylinders, bearings, belts, chains, and related mechanical components., • Equipment Documentation: Accurately document maintenance activities, work orders, parts usage, and equipment history within the Computerized Maintenance Management System (CMMS)., • Safety & Compliance: Follow all company safety policies and OSHA requirements, including Lockout/Tagout (LOTO), arc flash procedures, and safe work practices. Participate in safety inspections and continuous improvement initiatives., • Continuous Improvement: Identify recurring equipment issues and recommend improvements that increase reliability, reduce downtime, and improve production efficiency., • Project Support: Assist with equipment installations, facility expansions, renovations, machinery upgrades, capital improvement projects, and equipment commissioning., • Team Collaboration: Work closely with operations, engineering, and maintenance personnel to resolve equipment issues efficiently. Provide guidance and on-the-job training to less experienced technicians as needed., • Equipment Standards: Maintain all equipment in accordance with manufacturer specifications and company maintenance standards., • Material Handling & Mobility: Safely operate forklifts, scissor lifts, and other maintenance equipment. Work comfortably at heights, outdoors in varying weather conditions, and travel occasionally between facilities when required.QualificationsQualifications, • Must be at least 18 years of age., • Associate degree, technical diploma, or trade certification in Electro-Mechanical Technology, Industrial Maintenance, Industrial Electronics, Mechatronics, or a related field preferred. Equivalent hands-on experience will be considered., • 3–5 years of industrial maintenance experience in a manufacturing, production, or industrial environment., • Strong working knowledge of electrical and mechanical systems, including AC/DC motors, motor controls, VFDs, control panels, and 480V three-phase electrical systems., • Experience troubleshooting and maintaining PLC-controlled equipment, with the ability to read and interpret ladder logic., • Proficient in reading and interpreting electrical schematics, wiring diagrams, P&IDs, and mechanical drawings., • Working knowledge of pneumatic, hydraulic, steam, compressed air, and boiler systems., • Experience using a Computerized Maintenance Management System (CMMS) is preferred., • Knowledge of Lockout/Tagout (LOTO) procedures and NFPA 70E electrical safety standards., • Ability to lift up to 50 pounds and work in industrial environments that may include heights, confined spaces, varying temperatures, and outdoor conditions., • Must possess strong troubleshooting, problem-solving, and communication skills with the ability to work independently and as part of a team.BenefitsCompensation & Benefits, • Competitive hourly pay based on experience, technical skills, and qualifications., • Excellent work-life balance with a 4-day workweek and opportunities for overtime., • Paid time off (PTO) and paid holidays., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with a generous company match., • Company-paid life insurance and long-term disability coverage., • Company-provided uniforms., • Ongoing training and professional development opportunities., • Clear career advancement opportunities, including a defined pathway to Technician III and other leadership roles.Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description 91F Small Arms/Towed Artillery Repairer Instructor - Establish and maintain a training program and ensure proficiency requirements set forth in the Performance Work Statement. Provide academic instruction; review and update academic and doctrinal publications; and maintain vehicles/equipment supported by academic instruction. Provide academic instruction to conduct classroom/laboratory conferences, discussions, demonstrations, and practical exercises in accordance with course material, POI, technical manuals, and student workbooks. Conduct student critiques in accordance with United States Army (USA) ODS Standard Operating Procedures. Between scheduled courses, the following tasks will be completed: making pen and ink changes to lesson plans, cross-training (attending classes), arranging and engaging in instructional preparation and testing material, reviewing and providing pen and ink changes to lesson plans to the Government for change considerations, serving as an Assistant Instructor in classes. Provide feedback at the end of the block of instruction. Assist in updating technical content of lesson material in accordance with this PWS. Participate as a subject matter expert (SME) in developing revisions of the POIs, Lesson Plans and Training Support Packages (TSPs). Provide remediation training, maintain classrooms by re-configuring/setting up classroom furnishings, sort and maintain training aides and equipment, stock training materials and equipment, and/or assist with outdoor training site maintenance. Requirements • High School Diploma or equivalent, • Common Faculty Development-Instructor Course (CFDIC), or its equivalent within the last five (5) years with recertification requirements for the CFDIC every five (5) years, • TRADOC Initial Military Training (IMT) Installation Staff and Contractors Course (ISCC) with ISCC refresher training every three (3) years, • Blackboard 101 Instructor Training. The Contractor shall complete Blackboard 101 Instructor refresher training every three (3) years., • Minimum of three (3) years each of technical and tactical experience in small arms technical and tactical experience as evidenced by MOS's: 91F, 91G or 91K., • Background in the 91 F/G/K series, 2111 Small Arms Repairer/Technician, 2112 Precision Weapons Repairer/Technician, Air Force Small Arms/Armorer Technician or Navy Gunners Mate, or have completed a residential small arms repairman course or a residential Gunsmith course from an accredited institution., • Ability to perform Two Level Maintenance (Field Level Maintenance and Sustainment Level Maintenance) on small arms weapons to include shoulder fired weapons, handguns, machine guns, mortars and towed artillery weapons, • Proficient in Microsoft (MS) Office computer programs (Word, PowerPoint, Outlook, Teams, and Excel) Knowledge of applicable regulations and doctrine regarding MOS or ASI-specific training, • Written and oral communication, • Detail oriented, • Excellent organization, planning, coordination and time management skills, • Effective problem solving and interpersonal skills, • Pass all hands-on and written student tests IAW the ODS Instructional Management SOP, • Meet training, technical and tactical certification of course content, • Minimum of three (3) years specific experience in teaching, developing or reviewing course materials, training aids, and manuals for vocational or military training, • Proficient in basic mathematical skills up to and including roots and powers and metric notation, • Perform duties regarding moderate assisted lifting (not to exceed 100 lbs.), long periods of standing, sitting or walking, and endure inclement weather conditions on occasion. Job Posted by ApplicantPro

Job Description About the Role: The Certified Surgical Technician plays a critical role in supporting surgical teams by preparing operating rooms, ensuring all necessary instruments and equipment are sterile and ready for use. This position is essential for maintaining a safe and efficient surgical environment, directly contributing to positive patient outcomes. The technician collaborates closely with surgeons, nurses, and anesthesiologists to anticipate the needs of each procedure and respond promptly to any changes during surgery. Attention to detail and adherence to strict protocols are paramount to prevent infection and ensure compliance with healthcare regulations. Ultimately, the role demands a commitment to patient safety, teamwork, and continuous professional development. Join our surgical team and enjoy a variety of cases in GI, Urology, Plastic Surgery and Podiatry. Availability on Wednesday is a requirement for this role. Minimum Qualifications: • Current Certification as a Surgical Technologist (CST), • Completion of a formal surgical technology training program recognized by the Commission on Accreditation of Allied Health Education Programs (CAAHEP) or equivalent., • Valid BLS and ACLS certification., • Demonstrated knowledge of sterile techniques, surgical instruments, and operating room protocols., • Ability to pass background checks and comply with healthcare facility regulations. Preferred Qualifications: • Experience working in a hospital or surgical center environment., • Advanced certifications such as Certified Surgical First Assistant (CSFA)., • Familiarity with electronic health records (EHR) and surgical documentation software., • Strong communication skills and ability to work effectively within multidisciplinary teams., • Responsibilities:, • Prepare operating rooms by setting up surgical instruments, equipment, and sterile drapes according to the specific requirements of each procedure., • Assist surgical teams during operations by passing instruments and supplies, anticipating the needs of surgeons, and maintaining a sterile field., • Ensure all surgical instruments and equipment are properly sterilized and maintained, adhering to infection control standards and hospital policies., • Monitor and manage surgical supplies inventory to guarantee availability and timely replenishment., • Collaborate with healthcare professionals to maintain a safe, organized, and efficient surgical environment, including post-operative cleanup and documentation. Skills: The Certified Surgical Technician utilizes their expertise in surgical instrumentation to prepare and maintain the operating room environment, ensuring patient safety and procedural efficiency. Strong organizational skills are essential for managing surgical supplies and coordinating with team members to anticipate procedural needs. Effective communication skills facilitate seamless collaboration with surgeons, nurses, and other healthcare professionals, enabling quick responses to dynamic surgical situations. Technical proficiency with sterilization equipment and familiarity with healthcare documentation systems support compliance with regulatory standards. Continuous learning and adaptability allow the technician to stay current with evolving surgical practices and technologies, enhancing overall team performance.

Job Description Overview Join a leading healthcare laboratory as a Medical Laboratory Scientist, where your expertise will directly impact patient care through precise and accurate laboratory testing. This role offers the opportunity to work in a dynamic environment, utilizing your technical skills to analyze specimens, review test results, and ensure quality standards are met all while contributing to a team committed to excellence in diagnostic services. Responsibilities Follow established procedures for specimen handling, test analysis, reporting, and record keeping of patient test results. Maintain records demonstrating proficiency testing samples are processed similarly to patient specimens. Analyze specimens using approved testing techniques in accordance with department SOPs. Review and release test results accurately while adhering to quality control policies. Document and perform instrument calibrations, maintenance, and any corrective actions taken during testing. Follow safety guidelines outlined by CLIA, HIPAA, OSHA, and other relevant standards to ensure a safe working environment. Identify and resolve issues affecting test performance or reporting, escalating when necessary. Report STAT or critical results promptly to clients following departmental procedures. Maintain comprehensive records of all testing performed and ensure reagents/test kits are properly labeled with received, opened, and expiration dates. Participate in ongoing training, safety sessions, and departmental meetings to stay current with procedures and regulations. Assist in inspections and participate in quality assurance activities as needed. Maintain the general appearance of the laboratory workspace, ensuring cleanliness and organization. Required Skills Solid understanding of basic and high-complexity laboratory testing procedures. Strong computer skills with the ability to work across multiple laboratory information systems. Knowledge of quality control (QC) and quality assurance (QA) practices. Ability to review, interpret, and accurately report laboratory test results. Excellent attention to detail and problem-solving skills to identify and address testing issues. Additional Skills & Requirements Bachelor’s degree in Medical Technology, Chemistry, Biology, or a related field preferred; or an Associate degree in Laboratory Science or Medical Technology. Certification as a Medical Technologist (MT) or Medical Laboratory Technician (MLT) from recognized organizations such as ASCP or AMT is highly desirable. Minimum of one year of clinical laboratory experience, preferably in high-complexity testing. Strong interpersonal skills with the ability to interact professionally with team members and clients. Ability to prioritize multiple procedures and handle shifting demands efficiently. Must be able to work in a clinical laboratory setting and comply with safety regulations. Perform your role with precision and professionalism to support accurate diagnostics and quality patient care. Embrace this opportunity to advance your career in a reputable clinical laboratory environment. About Us: All Medical Personnel streamlines hiring to get you back to the work you love. Established in 1990, our staffing business lines place locum tenens, travel nursing, allied health, and clinical laboratory professionals from coast-to-coast. We believe in focusing and uplifting the hiring process, with a deep understanding of the unique challenges you face. We are here to ensure each experience with us is simplified, elevated, and impactful, for you and your patient. Please reference Job number: 301626

Job DescriptionASBESTOS FIELD PROJECT MONITORS/AIR SAMPLING TECHNICIANSOur firm Omega Environmental Services with its main office in S. Hackensack, NJ, and a satellite office in NYC has continued to expand and evolve as an essential environmental health and safety business during COVID-19. We currently have open asbestos and other field positions for qualified individuals with good communication skills and reliability. We are interested in both candidates with asbestos industry experience/certification(s), as well as entry-level individuals looking to make a career change and/or jumpstart a new career pathway in environmental health and safety. [Asbestos Project Monitor/AST job details]1. After orientation, training, and equipment assignment is complete, project field assignment set-up sheets are emailed out to asbestos field staff based upon their availability (days/nights/weekends). 1. For larger projects greater than 5 shifts, a Project Manager will also coordinate an on-site kick-off meeting to discuss job-specific requirements. A field tech can call the Project Manager and/or Training Coordinator at any time if they have any questions or concerns., 2. PM/AST travels to NY and/or NJ sites with air sampling equipment and required field documentation (punctuality is important because clients/contractors are waiting for us to start abatement projects)., 3. Asbestos air samples are set up at/around abatement work areas(s) according to published regulations and typically run 6-8 hours (while field tech. has to be present on-site and continuously observe and draft a sketch)., 4. After the monitoring shift, the field technician packages/ships air sample cassettes to the assigned laboratory and heads home or back to the office if there are equipment needs., 5. Air results are posted on-site following shift.Qualified candidates must have good communication, computer, and writing skills, plus be able to travel to/from project sites in New Jersey and New York. E04JI800f7i540056ki

Job Description Part-Time Certified Surgical Technician / Sterile Processing Technician Tenafly Surgery Center is seeking an experienced and reliable Part-Time Certified Surgical Technician who is also able to assist with sterile processing responsibilities. The ideal candidate will support the surgical team during procedures while also ensuring proper cleaning, sterilization, and processing of surgical instruments and equipment. Responsibilities: • Prepare and maintain the sterile field during surgical procedures, • Assist surgeons, anesthesia providers, and nursing staff during procedures, • Perform surgical counts according to policy, • Clean, decontaminate, inspect, assemble, sterilize, and store surgical instruments and trays, • Operate and monitor sterilization equipment according to policy and manufacturer guidelines, • Maintain accurate sterilization and biological testing logs, • Ensure compliance with infection control, OSHA, and aseptic technique standards, • Assist with room turnover and preparation for cases, • Maintain organization and cleanliness of the operating room and sterile processing area, • Report equipment or supply issues promptly Requirements: • Current Certified Surgical Technologist (CST) certification preferred, • Sterile processing experience required, • Knowledge of sterilization procedures, infection control, and aseptic technique, • Previous ambulatory surgery center or operating room experience preferred, • Strong organizational, communication, and teamwork skills, • Ability to multitask in a fast-paced surgical environment, • Flexible availability preferred Position Details: • Part-time position, • Ambulatory Surgery Center setting, • Competitive pay based on experience Please submit your resume for consideration.

Job Description Fire Alarm Technician Currently looking for an experienced and capable alarm technician(s). The ideal candidates should have 4 plus years’ experience, be knowledgeable installing & programming most commonly installed equipment, such as Fire Alarm, CCTV, & Access Control and be able to work independently and manage all field related responsibilities. To be considered for this position please reply to this email with a current resume. Should we be interested in discussing this position in greater detail someone from our office will reach out to schedule an interview. Looking forward to hearing from you! Expected Start Date: Immediately Job Type: Full-time Pay: Up to $35.00 per hour

Job DescriptionSalary: Company Overview Montana Construction Inc. is a family-owned heavy construction company specializing in sewer, water, bridge, and emergency services for municipalities, utility authorities, and private entities across New Jersey, New York, and Pennsylvania. We pride ourselves on delivering efficient, dependable, and quality service to every client. Job Summary The CCTV / Grout Technician is responsible for inspecting underground pipelines using closed-circuit television (CCTV) equipment, analyzing footage to identify structural issues, and performing grout mixing and injection for pipeline repair. This is a full-time, on-site role based in Lodi, NJ, requiring strong mechanical aptitude, attention to detail, and a commitment to safety in a demanding field environment. Key Responsibilities • Set up, deploy, and maintain CCTV inspection equipment to assess the condition of underground sewer and utility pipelines., • Review and analyze inspection footage to identify structural defects, blockages, and conditions requiring repair., • Mix, prepare, and inject chemical grout to seal leaking joints, cracks, and infiltration points in pipeline infrastructure., • Maintain accurate and detailed inspection records, daily reports, and work documentation., • Perform basic troubleshooting and field repairs on CCTV and grouting equipment; report significant maintenance needs to the supervisor., • Adhere to all safety protocols, confined space entry procedures, and OSHA requirements at all times., • Drive a CDL-required inspection or grouting truck to and from job sites in compliance with DOT regulations., • Perform other duties as assigned by the Foreman or Superintendent. Required Qualifications • Experience with CCTV inspection equipment for underground pipeline assessment., • Familiarity with grout mixing, injection techniques, and pipeline repair methods., • Strong mechanical aptitude and ability to troubleshoot equipment issues in the field., • Knowledge of construction and pipeline inspection safety protocols, including confined space procedures., • Strong organizational and recordkeeping skills., • Ability to work in confined spaces and outdoors in varying weather conditions., • Valid Commercial Drivers License (CDL) with a clean driving record required., • Current DOT medical certification required. Preferred Qualifications • Experience in heavy construction or underground utility work., • NASSCO PACP/LACP certification or familiarity with pipeline defect coding standards., • OSHA 10-Hour Construction certification., • Willingness to learn and adapt to new tools, technologies, and inspection methods. Work Environment & Physical Requirements • Full-time, on-site role at active construction and inspection job sites across NJ, NY, and PA., • Daily exposure to confined spaces, sewer environments, chemical grouting agents, heavy equipment, and varying weather conditions., • Ability to lift and carry equipment up to 75 pounds regularly., • Ability to stand, bend, kneel, and work in tight or confined spaces for extended periods.

Job DescriptionWe are a security Integrator serving NJ/NY area. We are seeking an employee to install cable networks for CCTV, and access control systems and aisst field technicians. Room for advancement to become a field technician. Applicant must have experience installing voice/data cable runs. Applicant should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills. There are overtime and year-end bonuses. We provide a company vehicle to go to job sites We offer medical benefits, Aflac options, pension plan, vacation/sick time. There is overtime and an end of the year bonus. Must have a valid and clean driver's license. Compensation depends on experience.

Job DescriptionSalary: $18 to $22 per HR Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success! We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the NY Metro area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various businesses including retail, hospital, and educational institutions, looking for strong communication skills and enjoyment of working with the public. All training provided by the company. Please email resume to jobs@beveragesystems.org Benefits Offered: • Medical, dental and vision, • Retirement, • EAP Benefits, • Paid-Time-Off, • Company cell phone Here is a brief description of the job: The Technician will professionally diagnose, restore, and repair beverageequipment throughout the day.Responsible for properly installing, repairing and maintaining field beverage equipment. Must represent the company and its customers in a professional manner. Maintain an acceptable level of productivity related to the amount of completed calls. Primary Responsibilities: • Perform installations, repairs and maintenance on commercial beverage and related equipment at our customers location., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform mechanic skills including, but not limited to, mechanical, electrical, plumbing, troubleshooting and repair of beverage equipment., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Demonstrate proper knowledge of equipment. Communicate with the supervisor when extra training may be needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with regulations and maintain a clean and orderly work area., • Conduct yourself in a professional manner at all times while treating customers, driving company vehicles, etc. Treat others how you would like to be treated, • Fill out field service reports properly, legible and with as much information as possible. When eligible., • Maintain frequent communication with the dispatcher to assure that the right information is relayed and entered into our system., • Maintain company vehicles in good working condition, both mechanically and organized., • Arrange for company vehicles to get routine maintenance and any required service. Make sure proper documentation is kept up-to-date and kept in company vehicles at all times.All repairs and service on vehicles covered by the company through our fleet management company., • Fulfill all new and existing training requirements as set by service managers and/or technician development directors., • Must be able to cover emergency calls on weekends on a rotating basis as laid out by the manager to satisfy the market needs., • Other duties as assigned. Qualifications & Requirements: • Must be able to maintain a valid driver's license., • Clean Driver Record, • Occasional Weekend Availability, • Must have some electrical troubleshooting knowledge., • Be able to read volts, amps, ohms and continuity on multimeters., • Must have some plumbing knowledge., • Must provide your own general tools. Specialty industry tools provided to the technician on loan by the company. Working Conditions: Work includes long distance driving. Occasionally lifting of machinery and/or items that may exceed 75 lbs. Must be able to work overtime as requested by management, within reason. If you want to be a part of a growing family business who has a passion for their employees and their customers please email resume to jobs@beveragesystems.org

Job DescriptionTITLE: HELPDESK TECHNICIANLOCATION: HACKENSACK, NJ Seeking a Help Desk Technician for our client’s Hackensack, New Jersey office. The schedule is Monday through Friday, 9:30 a.m. to 5:30 p.m.JOB SUMMARY:The position involves providing technical assistance for hardware, software, and mobile devices, supporting video conferences through Teams and Zoom, maintaining equipment inventory, and documenting support activity in the Firm’s ticketing system. The role requires adherence to established procedures, strong documentation discipline, and the ability to work effectively both independently and in a team environmentREQUIREMENTS: • Candidates should have experience with Microsoft Windows 11, Microsoft 365 (especially Outlook and Word), and iManage (strongly preferred)., • Applicants must have excellent written and verbal communication skills, strong interpersonal ability, and the aptitude to learn new tasks quickly., • Periodic travel to other Firm offices is required, along with additional travel for office buildouts and expansions., • The position also requires flexibility to provide occasional shift coverage or extended hours when needed., • A law firm or professional services background is preferred., • An associate’s or bachelor’s degree in information systems or a related field, or equivalent work experience, is also preferred.

Job DescriptionTITLE: HELP DESK TECHNICIANLOCATION: HACKENSACK, NJSCHEDULE: M-F (9:30AM-5:30PM) Job Summary: Seeking a Help Desk Technician to complete our client’s four-person Helpdesk team. The position involves providing technical assistance for hardware, software, and mobile devices, supporting video conferences through Teams and Zoom, maintaining equipment inventory, and documenting support activity in the Firm’s ticketing system. Applicants must have excellent written and verbal communication skills, strong interpersonal ability, and the aptitude to learn new tasks quickly. The role requires adherence to established procedures, strong documentation discipline, and the ability to work effectively both independently and in a team environment. Requirements: • Significant experience with Microsoft Windows 11, Microsoft 365 (especially Outlook and Word),, • I Manage experience (strongly preferred), • Ticketing system experience, • A law firm or professional services background is preferred., • An associate’s or bachelor’s degree in information systems or a related field, or equivalent work experience, is also preferred., • Periodic travel to other Firm offices is required by a team member every few months, along with a couple of additional trips each year by some team members for office buildouts and expansions., • Flexibility to provide occasional shift coverage or extended hours to cover planned and unplanned PTO.