Trabajos technician en PudseyCrear alertas

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes like Amazon Robotics and our Complex Item Sorter. • NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics, • 4 years UK certified apprenticeship, • Advanced proficiency in the local language verbally and in writing, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards, • Experience with robotic operation and maintenance, • Experience in condition-based monitoring, • Experience with predictive and preventative maintenance, repair, troubleshooting, and diagnostics on material handling equipment (MHE) and automated conveyor systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Launch Your Cyber Security Career – Job Guaranteed! \n Cyber attacks are rising, and companies need skilled professionals now more than ever. \n \n With Newto Training’s Cyber Security Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Security+, CompTIA CySA+, Forescout FSCA) plus real-world project work that doubles as hands-on experience. \n 100+ hours of live training \n Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management \n Job guarantee with our hiring partners \n Get certified, get experience, get hired. \n \n Apply today and start your journey into cyber security. \n Course cost - £2295 or £191.25 per month \n \n \n We guarantee you will be offered a job upon completion, or we will refund you 100% \n of your course fees.

Kickstart Your Career in Ethical Hacking – With Guaranteed Job Opportunities \n Are you ready to break into one of the fastest-growing industries? Cyber professionals are in high demand worldwide, and Newto Training can help you become one of them. \n Our Ethical Hacker Career Programme is designed to give you industry-recognised certifications, practical work experience through project work, and the skills employers are looking for. Whether you’re new to IT or looking to transition your skills, we’ll get you job-ready and connect you with our partner companies to help you secure your first role. \n What You’ll Achieve: \n\n • Globally recognised certifications: Microsoft Azure Fundamentals, Certified Cybersecurity Technician (CTT), Certified Ethical Hacker (CEH) & Forescout FSCA (free exam re-sit included)\n, • Hands-on project work that counts as real-world experience, including:\n, • Troubleshooting, Printer Management, Back Up/Disk Partition, and Network Mapping\n, • Networking with Cisco: Wireless Management, VLANs, Routing Protocols, Server Management, and Port Security\n, • Microsoft Azure: IaaS & PaaS deployment, Storage Management, Virtual Networks, Security, and IoT solutions\n, • SIEM Technologies (Splunk) for security monitoring and analysis\n, • Vulnerability Management using Tenable\n\n What You’ll Get: \n\n • 100+ hours of live, instructor-led online training\n, • Direct experience simulating the challenges you’ll face in the workplace\n, • Skills that certify your ability to protect, monitor, and manage IT environments\n, • A guaranteed route into employment through our network of hiring partners\n\n At Newto Training, we don’t just teach you theory, we make sure you leave with the skills, certifications, and experience to step straight into your first role. \n Ready to launch your cyber career? Apply now and secure your place today. \n Course cost - £3495, or, £291.25 per month \n \n We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Cyber Security Career – Job Guaranteed! \n Cyber attacks are rising, and companies need skilled professionals now more than ever. \n \n With Newto Training’s Cyber Security Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Security+, CompTIA CySA+, Forescout FSCA) plus real-world project work that doubles as hands-on experience. \n 100+ hours of live training \n Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management \n Job guarantee with our hiring partners \n Get certified, get experience, get hired. \n \n Apply today and start your journey into cyber security. \n Course cost - £2995, or, £249.58 per month \n \n \n We guarantee you will be offered a job upon completion, or we will refund you 100% \n of your course fees. \n

Kickstart Your Career in Ethical Hacking – With Guaranteed Job Opportunities \n Are you ready to break into one of the fastest-growing industries? Cyber professionals are in high demand worldwide, and Newto Training can help you become one of them. \n Our Ethical Hacker Career Programme is designed to give you industry-recognised certifications, practical work experience through project work, and the skills employers are looking for. Whether you’re new to IT or looking to transition your skills, we’ll get you job-ready and connect you with our partner companies to help you secure your first role. \n What You’ll Achieve: \n\n • Globally recognised certifications: Microsoft Azure Fundamentals, Certified Cybersecurity Technician (CTT), Certified Ethical Hacker (CEH) & Forescout FSCA (free exam re-sit included)\n, • Hands-on project work that counts as real-world experience, including:\n, • Troubleshooting, Printer Management, Back Up/Disk Partition, and Network Mapping\n, • Networking with Cisco: Wireless Management, VLANs, Routing Protocols, Server Management, and Port Security\n, • Microsoft Azure: IaaS & PaaS deployment, Storage Management, Virtual Networks, Security, and IoT solutions\n, • SIEM Technologies (Splunk) for security monitoring and analysis\n, • Vulnerability Management using Tenable\n\n What You’ll Get: \n\n • 100+ hours of live, instructor-led online training\n, • Direct experience simulating the challenges you’ll face in the workplace\n, • Skills that certify your ability to protect, monitor, and manage IT environments\n, • A guaranteed route into employment through our network of hiring partners\n\n At Newto Training, we don’t just teach you theory, we make sure you leave with the skills, certifications, and experience to step straight into your first role. \n Ready to launch your cyber career? Apply now and secure your place today. \n Course cost - £3495, or, £291.25 per month \n \n We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Company description:Water Utility Company based in Yorkshire region of England.Job description:Project Technician ElectricalHello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water:We offer a competitive salary, depending on experience, 5a, £41,815 - £49,988A company car through company car lease schemeAnnual incentive related bonus ( £1000 maximum bonus opportunity for the performance year )Attractive pension scheme ( up to 12% company contribution )Development opportunities in line with the Project Technician Electrical progression plan25 days annual leave plus bank holidays plus two extra wellness days!Life assurance cover of 4 times pensionable salaryA great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover.Retail savings schemeOnline GP service, cycle to work scheme, gym membership discounts and many more!Work type: Permanent. 37 hours per week, Monday Friday with overtime available.We have an exciting opportunity for a Project Technician Electrical to join the Specialist Projects Team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you?What we do:Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this.We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity.New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Specialist Projects Team are a key part of how we plan to meet the changing expectations of customers and regulators.As a Project Technician Electrical , you will provide design and build project services to manage specific small projects within the Specialist Project Teams portfolio through from conception to hand-over to the relevant Business Partner.This includes liaising with operators, engineering design, project budget and cost control, project planning and reporting, site surveys, design, procurement, contractor selection and tendering, site supervision, commissioning and operator training (with support from others).Where you fit in:As our Project Technician Electrical you will;Develop and deliver cost engineered solution to in response to Business Risk ensuring adherence to correct national and internal regulations, policies and standards in terms of both the design and life cycle considerations.Ensure compliance with CDM regulations for projects including acting as named person for Principal Contractor on behalf of Yorkshire WaterProvide design and build project services to manage specific small to large scale projects within the Specialist Projects portfolioDrive excellent standards and performance in health and safety, risk management and control of work to ensure compliance with the YW Safety Policy.Manage the execution of the project ensuring alignment with all Health, Safety and Environmental and engineering standard requirements.Work as part of the team to deliver excellent performance by understanding how their individual performance links into achieving the teams wider objectives.What skills & qualifications you will need:Electrical based apprenticeship or Electrical Engineering degree or equivalent / ONC/HNC/BTEC in Electrical Engineering.Understands the principles of control of works - Permits, POWRA, RAMS etc.Has a good understanding of the design and project delivery process including hazard identification, risk assessment and site supervision.Is able to highlight technical issues and supports and contributes to resolution.Is able to manage & prioritise workload whilst maintaining effective operational relationships.Current valid driving licence and flexibility to travel across the Yorkshire region.You will also benefit from having:Experience of driving sustainable performance against challenging business targets.Previous experience in a commercially orientated and / or regulated environment.Knowledge of the range of equipment within the Water Industry including high pressure/temperature waste processing facilities, CHP and high voltage equipmentCITB SMSTS trained with valid cardAlthough we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy!Do we sound like your cup of tea?If youve got experience as a Project Technician Electrical and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you.AccessibilityWe are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible.If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required.Just a heads-up! We might start interviewing and close the position earlier based on the response. To make sure youre considered, please send in your application as soon as you can.If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance.All our roles are subject to a medical questionnaire, and further medicals when required.No agencies pleaseTPBN1_UKTJ

Vehicle Technician\n Location: Bradford\n Salary: up to £37,000 basic per annum plus bonus\n Hours: Monday to Friday 40 hours, Saturdays on rota\n Reference: 30544\n \n \n My client, a well established and reputable main dealership, is recruiting an experienced Vehicle Technician to join their friendly and professional aftersales team in Bradford. This is an excellent opportunity to work within a modern, manufac...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Are you ready to shape the future of renewable energy transport? Collett and Sons Ltd has an exciting Transport Consultant (CAD Technician/Surveyor) opportunity!Location: Bradford, West Yorkshire, BD12 0QYSalary: CompetitiveJob Type: PermanentHours: Monday to Friday 08:00 to 17:00, with occasional overtime and weekend workingAbout Us:Collett and Sons Ltd is a successful family-owned specialist transport company with a national and international reputation. Operating for decades, we provide general haulage, heavy transport, heavy lift, marine and consulting services. We are world-renowned for delivering wind turbine components and abnormal load movements in the Renewable Energy industry. The company holds ISO9001, ISO14001, ISO27001 and ISO45001 certification and continues to expand its consulting division in the renewables sector.Transport Consultant (CAD Technician/Surveyor) - The Role:Working as part of the Consulting team and reporting directly to the Consulting Manager, you will provide transport planning, assessment and reporting services for abnormal load movements. You will conduct site meetings across the UK and occasionally Europe, combining CAD expertise with surveying skills to plan the delivery of out-of-gauge components including wind turbine and renewable energy equipment. This varied role requires you to communicate with clients, drivers, local authorities and contractors while managing complex site assessments and route planning.Transport Consultant (CAD Technician/Surveyor) - Key Responsibilities:- Create route assessment reports, audits and swept path analysis using CAD software- Carry out land-based surveying using calibrated instruments for topographical surveys- Assess, review and design loading and transport methods using 2D and 3D CAD- Conduct site visits, route planning and desk-top studies using online mapping tools- Attend trail runs and communicate directly with clients, drivers, local authorities and site contractors- Undertake CDM regulation assessments and compliance reviewsTransport Consultant (CAD Technician/Surveyor) - You:- Qualified to A Level standard or equivalent, with knowledge of transport, engineering or surveying standards- Proficient in 2D and 3D AutoCAD with experience of CDM regulations- Experience with total stations and land-based surveying equipment (desirable)- Self-motivated, well-organised team player with excellent communication and attention to detail- Valid UK driving licence and passport essential for UK and European travel- Engineering knowledge in mechanical or civil disciplinesBenefits:- 28 days holiday per year including bank holidays, with holiday purchase scheme available- Company pension scheme contributions subject to conditions- Continuing Professional Development provided after probationary period completion- Opportunity to develop and grow within a dynamic, experienced consulting team- Exposure to varied and challenging projects in the renewable energy sectorTo submit your CV for this exciting Transport Consultant (CAD Technician/Surveyor) opportunity, click Apply today!TPBN1_UKTJ

Cyber Security Placement Programme - No Experience Required Are you looking to benefit from a new career in IT and Cybersecurity? Skills shortages in the IT sector are driving the need for qualified, entry-level career seekers and career changers. \n We help place graduates from this programme in top UK companies and organisations needing to employ entry-level IT and Cybersecurity staff that can hit the ground running with up-to-date skills gained from this programme. \n The best part is you will not need any previous experience as fully accredited training, which includes tutor support and mentoring, provides you with the skills, practical knowledge and qualifications for you to secure a professional job and career in IT. You will also have the reassurance of a job guarantee (£26K-£35K) upon completion. \n Whether you are working full time, part time or are unemployed, this package has the flexibility to be completed at a pace that suits you and can be completed in a few weeks or a few months (step 1 to 4 below). Your job and career goals are completed in 4 easy steps. \n Step 1 - Accredited Online Training \n The first step is completing a selection of professional, accredited and industry recognised courses from CompTIA which is the global leader in IT Technician, Networking and Cybersecurity training. The training is delivered via multimedia rich video tutorials, practice labs, presentations and quizzes through a portal that you study from home. You will also be assigned an expert tutor and a support mentor to help you throughout your training. \n Step 2 - Practical Training \n You will gain practical experience by using practice labs which enable you to practice and master what you have learned. Gaining practical hands-on experience gives you confidence to be proficient in your first IT role. This combination of theoretical and practical skills is what line managers need you to have to be effective and confident in your role. \n Step 3 - Official exams \n You will then go on to sit the CompTIA A+ and the CompTIA Network+ exams to give you the official certifications which will be recognised not only in the UK, but worldwide. The CompTIA A+ is the most asked for certificate for entry-level IT roles \n and the certification most IT Managers start their own careers with. All PCs in a professional environment are networked to servers, cloud based or otherwise and the Network+ gives you a needed foundation level of knowledge in networking. \n Step 4 - IT Technician placement (£26-£35K) \n We work with you to secure your first role as an IT Technician, with a starting salary of anywhere between £26K-35K. Ideally you will need to gain two years’ experience in this role before you can progress into a cyber security role. While working as an IT Technician, we will release your second batch of training which is specifically designed to qualify you to move into the cybersecurity field. This official, accredited training consists of online training, practical training and an official exam (CompTIA Security+). Further we can tailor the package to include courses like the Certified Ethical Hacker and Certified Network Defender depending on your requirements and future direction. \n Cybersecurity Role \n Once you have completed all the mandatory training in step four and have gained two plus years experience in the IT industry, you will be ready to move into higher paying Cybersecurity roles. Our recruitment support team specialises in the IT and Cybersecurity space and roles at this level have an average starting salary of £35K. \n We have been helping career changers and new career seekers gain new careers since 2009 and we are a CompTIA Gold Partner, accredited by the BCS (Chartered Institute of IT/ British Computer Society) and the EC-Council to ensure we provide the highest levels of training. \n In addition, we are also ELCAS approved to help members of the Armed Forces, Service Leavers and Veterans gain rewarding careers in IT and Cybersecurity. \n Job Guarantee \n Due to the success of this programme and the skills shortage of entry-level IT staff, we can guarantee you will secure a job upon completion of your study programme or we will refund you up to 100% of your course fees back. This is subject to our terms of learning/ terms of business. \n Passionate about starting a career in IT? Apply now and one of our friendly advisors will be in touch. \n Keywords: IT Technician, IT Helpdesk, IT Security, IT Field Engineer, Cyber Security, IT Support, 1st Line Support, 2nd Line Support, IT Training Course, Cyber Training Course, Cyber Security Course, First Line Support, Second Line Support, IT Security Engineer, IT Engineer, CompTIA A+, CompTIA Network+, CompTIA Security+, Ethical Hacker

Overview \n Competitive Salary + Overtime + Career Progression + £1500 JOINING BONUS* \n Join a Team That Keeps the UK Moving \n Make Your Move and join a team where your skills are valued, your growth is supported, and your work truly moves the world. At Enterprise Mobility, we operate one of the UK’s most diverse and dynamic vehicle fleets. Now, we’re looking for a skilled and motivated LCV Technician/ Mechanic to join our Flex-E-Rent Leeds workshop team. If you’re passionate about vehicles and want to work in a supportive, forward-thinking environment, this is your opportunity to thrive. \n Why Join Us? \n\n • Competitive Pay – With overtime paid at 1.25x and annual salary reviews.\n, • Structured Career Development – Our 5-stage training programme can take you to Master Technician level.\n, • Work-Life Balance – Monday to Friday schedule with no weekend shifts.\n, • Generous Leave – 25 days annual leave, increasing to 30+ with service + bank holidays + time off on your Birthday!\n, • Comprehensive Benefits – Including pension, life assurance, access to same day virtual private GP appointments & more!\n, • Employee Perks – Discounts on car hire, Cycle to Work scheme, paid volunteer days. \n\n What Division will I be working in? \n Enterprise Flex-E-Rent is our commercial vehicle rental division, providing services tailored to the needs of commercial vehicle hire customers from locations all across the UK and Ireland. Join our team and be one of the people driving our growth. \n To help understand and find out more about our Flex-E-Rent division of Enterprise Mobility, please visit: Commercial Vehicle Hire | Enterprise Flex-E-Rent (flexerent.co.uk) \n Location \n Enterprise Flex-E-Rent, 17 Parkside Lane, Leeds, LS11 5TD \n *£750 payable in first months’ pay and £750 payable after successful completion of 90-day probation review. Subject to tax and NI deductions, eligibility criteria will apply \n Responsibilities \n What You’ll Be Doing: \n\n • Diagnosing, maintaining, and repairing a wide range of vehicles\n, • Working with top brands like Mercedes, Iveco, and Ford\n, • Ensuring all vehicles meet safety and quality standards\n, • Prepare vehicles for MOT\n, • Collaborating with a skilled, friendly team\n\n Qualifications \n What We’re Looking For: \n\n • NVQ Level 3 in Vehicle Maintenance (or equivalent)\n, • Experience working with HGVs or LCVs\n, • A Full UK / Irish / EU Manual Driving Licence\n, • A proactive, detail-oriented approach and a passion for vehicle maintenance\n\n Enterprise Mobility is a family-owned business that values its people. We invest in your growth, support your ambitions, and offer a stable, rewarding career path. \n Apply now and take the next step in your journey with a company that puts technicians first. Should you require our relocation assistance please speak to a member of the Talent Acquisition Team for details. \n Please note that all applicants must have the ability to pass a security check involving financial probity and basic criminality.

Technician Location: LeedsSalary: £47,147 per year (rising to £55,000+)Shift Pattern: 4 on / 4 off \n A fantastic opportunity has opened for a Level 3 qualified Electrical Technician with strong mechanical fault finding knowledge from a heavy engineering environment who would like to step into the rail industry and work on some of the most powerful machines on the network. \n Your New Opportunity \n Join a highly skilled engineering team of Electrical Technicians responsible for keeping heavy diesel locomotives running safely and reliably.In this role, you will: \n\n • Carry out electrical and mechanical maintenance, repair, and overhaul tasks on locomotives.\n, • Diagnose, investigate, and repair faults across electrical, mechanical, pneumatic, and hydraulic systems.\n, • Use written electrical maintenance instructions (VMI) and engineering drawings to complete examinations, inspections, and routine servicing.\n\n Every shift offers variety, technical challenges and the chance to work on impressive large-scale machinery. \n The Ideal Candidate \n You’ll bring experience, precision, and a strong maintenance mindset. We’re looking for someone with: \n\n • Previous experience as an electrical and mechanical technician in a heavy engineering environment.\n, • You will have strong electrical fault finding and diagnostics skills\n, • A background from sectors such as REME (ex-forces), HGV, bus/coach fleets, aviation, large machinery, or ideally locomotives/rolling stock.\n, • Confidence working rotating shifts, including earlies, lates, and nights.\n\n Essential Criteria \n\n • Proven maintenance and fault-finding experience within transport or plant engineering.\n, • Level 3 qualification (or equivalent) in electrical or mechanical engineering.\n, • Full UK driving licence.\n, • Ability to pass a medical, drug & alcohol screening, and a DBS check.\n\n Progression & Earnings \n Your base salary starts at £47,147 per year, with clear and achievable routes to increase your earnings: \n\n • Additional £1,000 per year for train driving and shunting duties.\n, • Up to 6 technical training modules, each worth £1,500 per annum, enabling total earnings of £55,000+.\n, • Training includes shunter operations, axle & bearing engineering, electrical fault-finding, mentoring, and more.\n\n This is a brilliant chance to grow your career in a thriving sector with unmatched stability, development, and long-term prospects. \n Take the next step in your engineering journey — apply today and progress your career in the rail industry.Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom.1. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services – permanent and temporary.2. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract.3. Ford & Stanley Executive Search – Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe.4. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way.Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.Services advertised by Ford & Stanley are that of an employment consultancy business.

Motor Vehicle Lecturer\n Location: YorkshireJob Type: Full Time | PermanentSalary: £30,000 - £36,000 per annum \n Are you an experienced Motor Vehicle Technician looking for a new challenge? Or are you already teaching and looking for your next opportunity? \n We are looking for passionate and motivated Motor Vehicle Lecturers to join our growing automotive team. This is an excellent opportunity to inspire the next generation of automotive professionals while enjoying excellent work-life balance, career development and job security. \n No teaching qualification? No problem. We welcome applications from unqualified lecturers. If you hold an NVQ Level 3 in Motor Vehicle (or equivalent) and have industry experience, we'll provide all the training and support you need to gain a recognised teaching qualification while you work. \n You'll deliver engaging theory and practical lessons across Level 1 to Level 3 Motor Vehicle Service and Repair programmes, helping learners develop the technical knowledge and practical skills needed to progress into employment or apprenticeships. The Role\n As a Motor Vehicle Lecturer, you will: \n\n • Deliver engaging classroom and workshop-based teaching.\n, • Teach learners across Level 1, Level 2 and Level 3 Motor Vehicle programmes.\n, • Support full-time students, adult learners and apprentices.\n, • Inspire, motivate and develop the next generation of automotive technicians.\n, • Plan lessons, assess learner progress and provide constructive feedback.\n, • Maintain accurate learner records and contribute to high standards of teaching, learning and assessment.\n, • Promote a positive, safe and professional learning environment.\nWhat We're Looking For\n\n, • NVQ Level 3 in Motor Vehicle (or equivalent).\n, • Recent industry experience within the motor vehicle sector.\n, • Enthusiasm for developing and inspiring future technicians.\n, • Good communication and organisational skills.\n, • Basic IT skills, including Microsoft Office.\n, • Teaching experience is not essential. If you're new to education, we'll support you in achieving a recognised teaching qualification.\nWhat We Offer\n\n, • Competitive salary of £30,000 - £36,000 per annum.\n, • Full teacher training and funded professional development.\n, • Excellent opportunities for career progression.\n, • 40 - 50 days of annual leave\n, • 28.68% pension contribution\n, • A supportive working environment where you can make a genuine difference to people's lives while sharing your industry expertise.\n\n Important Notice \n Dovetail and Slate is a specialist education recruitment company. If this role isn't quite right, we welcome your CV and a call to explore other opportunities. \n We are committed to safeguarding children and vulnerable adults. All appointments are subject to satisfactory vetting, including a right to work check and, where relevant, an enhanced DBS, PVG (Scotland), or EWC (Wales) check, in line with Keeping Children Safe in Education. \n Dovetail and Slate Ltd (11351060) acts as an Employment Agency and an Employment Business under the Conduct of Employment Agencies and Employment Businesses Regulations 2003. \n We are an equal opportunities employer. By applying, you consent to your data being processed for recruitment purposes in line with our Privacy Policy. \n Because education matters. \n Dovetail and Slate Limited. \n Because education matters. Dovetail and Slate Limited (11351060) acts as an Employment Agency.

We are looking for a highly motivated Service and Maintenance Engineer who is ready to contribute to improving the lives of individuals in care establishments.Service & Maintenance EngineerLocation: Heckmondwike, West YorkshireJob Type: Full-Time, PermanentHours: Monday to Friday, 8:00am – 4:00pm (Overtime available)Salary: Negotiable depending on experienceYou must hold an Enhanced DBS certificate or be willing to undergo an Enhanced DBS check.Our client is a leading provider of equipment and services to the UK healthcare sector and presents an excellent opportunity for someone with a mechanical or electrical background who enjoys problem-solving, working independently and delivering exceptional customer service.Some of the duties of a Service & Maintenance Engineer:To undertake the service and maintenance of beds, hoists, pressure care equipment and other daily living aids. Predominantly within healthcare establishments.To liaise with the service centre for call outs, repairs and emergencies.To ensure all parts used are accounted and recorded correctly.To always apply exceptional standards of engineering practice, when carrying out all aspects of service work and installation projects.What we look for in a Service & Maintenance Engineer:To hold a current, clean, valid driving licence.To have previous experience in an electrical or mechanical position would be advantageous but is not essential.To have experience of PAT or LOLER Testing is an advantage, but full training is provided.Basic DIY skills and be physically fit as the role will involve lifting and carrying.Excellent customer service skills, friendly and approachable, as you will be dealing with members of the public.A good communicator, resilience when needed and have an empathetic nature.Applicants must either hold a current Enhanced DBS certificate or be willing to undergo an Enhanced DBS check as part of the recruitment process.In return, we offer you the following:A chance to work as part of a great team doing a rewarding job.Competitive salary and benefits.Career progression opportunities & training.Pension scheme.Holidays rising with service.Entitlement to Employee Assistance Programme.Apply TodayIf you're looking for a rewarding engineering role with excellent training, career development opportunities and the chance to make a real difference, we'd love to hear from you.How to apply for the role:If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to tailor your application and provide a cover letter or any supporting documents.Other suitable skills and experience include:Service Engineer, Maintenance Engineer, Field Service Engineer, Mechanical Engineer, Electrical Engineer, Medical Equipment Engineer, Installation Engineer, Repair Technician, Maintenance Technician, Engineering Technician, Workshop Engineer, PAT Tester, LOLER Engineer, Service Technician, Fault Finding, Preventative Maintenance, Reactive Maintenance, Healthcare Equipment, Mechanical Maintenance, Electrical Maintenance, Engineering Jobs.TPBN1_UKTJ

Designer – HVAC Products & Systems \n Job Title: 2x Mechanical Design Engineer – HVAC Products \n \n Job Reference Number: \n Industry Sector: Designer, CAD Designer, CAD Engineer, Engineer, Mechanical Design Engineer, Technical Engineer, Design Technician, CAD Technician, AutoCAD, Autodesk, Inventor, Vault, Air Source Heat Pumps HVAC, Air Handling Units, AHU, Acoustic, Boilers, Control Systems, Total Package Solutions, Ventilation, Air Conditioning, Fan Coils, Cooling, Data Centres, Manufacturing, Fabrication, Engineering, M&E \n Office Based: West Yorkshire \n Remuneration: £40,000 - £50,000 \n Benefits: Health and life benefits, on-site gym, company pension and strong benefits package \n The role of the Designer – HVAC Products will involve: \n\n • Designer role working on bespoke ventilation, acoustic and cooling systems for the Data Centre market\n, • Produce 3D models and technical drawings for customer approval using Autodesk Inventor and Vault software\n, • Work closely with Engineering, Projects and Operations teams to ensure designs meet budget and production requirements\n, • Attend meetings and provide design input to improve efficiency and material usage\n, • Amend drawings where required and highlight any design changes that may impact costs\n, • Ensure all drawings are accurate, high-quality and completed within project deadlines\n, • Liaise with customers and internal teams to resolve technical queries throughout the project lifecycle\n\n The ideal applicant will be a Designer – HVAC Products with: \n\n • Must have Design experience with Autodesk Inventor or Vault Software\n, • Must have experience within the HVAC market sector, may be open to a candidate from a related mechanical or engineering design background\n, • Highly advantageous to have experience working with cooling products supplied into Data Centres or related sectors\n, • Preferable to have a related degree (mechanical, electrical, etc.)\n, • Motivated individual who can work autonomously\n, • People person with strong time management and organisation skills\n, • Enthusiastic and determined\n\n Mitchell Maguire is a specialist Construction Recruitment Consultancy, dealing exclusively with Construction Jobs, Construction vacancies and Specification positions within: Designer, CAD Designer, CAD Engineer, Engineer, Mechanical Design Engineer, Technical Engineer, Design Technician, CAD Technician, AutoCAD, Autodesk, Inventor, Vault, Air Source Heat Pumps HVAC, Air Handling Units, AHU, Acoustic, Boilers, Control Systems, Total Package Solutions, Ventilation, Air Conditioning, Fan Coils, Cooling, Data Centres, Manufacturing, Fabrication, Engineering, M&E

Senior Electrical Technician (Biomethane) \n Leeds, Sheffield | £53.4k - £66.7k per annum (dependent on skills and qualifications) \n Full-time | Hybrid – Home/Site based \n Joint-contribution pension from 6% (12% total) – Enhanced maternity & family leave – Life assurance – HolidayPlus – Virtual GP & Employee Assistance Programme plus retail and leisure discounts & many more. \n REQ5659 \n \n Our Green Gas Solutions team plays a vital role in the safe operation and maintenance of biomethane plants across Yorkshire. We’re now looking for an experienced and motivated Senior Biomethane Technician (E&I) to join our expanding team and help ensure our sites operate safely, efficiently, and reliably. \n You’ll be part of a skilled biogas operations team, carrying out daily and weekly site tasks, supporting planned and statutory maintenance, diagnosing faults, and contributing to more complex project work across our biomethane assets. \n SGN Green Gas Solutions is a wholly owned subsidiary of SGN. We own and operate several biomethane gas clean-up plants and network entry facilities, and we also provide operational and maintenance services to third-party sites. \n \n We deliver safety, warmth, and comfort to homes and businesses. Every role, whether in the office or on the front line, plays a key part in this mission. Here’s how you will contribute… \n As a Senior E&I Technician, you’ll take responsibility for the safe and reliable operation of electrical, instrumentation, and control systems across our biomethane process plants in the Yorkshire region. \n\n • Maintaining E&I assets in line with SGN GGS electrical safety rules, industry standards, and regulatory requirements.\n, • Delivering operational and maintenance activities on instrumentation, control systems, gas quality systems, safety circuits, and power distribution equipment.\n, • Carrying out planned preventive maintenance, including repairs, overhauls, shutdown work, CompEx inspections, and component replacement—always following LOTO, permit-to-work, and hazardous-area procedures.\n, • Completing routine site checks, logging readings, identifying leaks, abnormal vibration, or equipment deterioration across both electrical and mechanical systems.\n, • Responding to alarms and downtime events, undertaking complex electrical fault-finding and restoring safe operation.\n, • Troubleshooting E&I issues, including diagnosing control system faults, inspecting wiring and terminations, and repairing equipment following safe systems of work.\n, • Working closely with customers, contractors, suppliers, Gas Distribution Networks, and internal teams to ensure safe and reliable plant performance.\n, • Participating in a standby rota to provide 24/7 emergency support.\n, • Travelling across a wide geographical area, working independently and as part of a team depending on operational needs.\n\n The role will require close cooperation and communication with our commercial customers and other key stakeholders including Gas Distribution Network representatives, our key contractors and suppliers, internal departments as well our biomethane team. \n This role works across a large geographical area, and you will be working as part of a team as well as on your own, depending on the work you are doing. You will be expected to participate in a standby rota to deliver a 24/7 out-of-hours emergency support service. \n \n What you will need \n\n • A strong understanding of the Electrical & Instrumentation engineering discipline within an operations and maintenance environment.\n, • NVQ Level 3 (or above) and completion of a recognised apprenticeship in electrical, electronic, or instrumentation engineering (minimum 2 years’ experience).\n, • The ability to prioritise workload effectively to meet operational and customer demands.\n, • Confident IT skills and the ability to use digital systems effectively.\n, • A safe, methodical approach to work, with the ability to react positively when required.\n, • Strong communication and customer-service skills, consistently demonstrating SGN’s core behaviours.\n, • Flexibility to participate in a standby rota and attend sites outside normal working hours.\n, • Willingness to travel across Yorkshire and occasionally to other UK locations including London, the South East, and Scotland.\n, • A full valid driving licence.\n\n \n Not sure you meet every requirement? \n Research shows some people – particularly women and those from underrepresented backgrounds – may hesitate to apply unless they meet every criteria. At SGN, we value diverse backgrounds, experiences and perspectives. \n If this role interests you but you’re not sure you tick every box, we’d still love to hear from you. You might be just who we’re looking for – now or in the future. \n \n Why SGN? \n SGN leads pioneering research and development for a energy system. Our innovative technologies are transforming the gas industry while keeping people safe and warm. We are an award-winning employer, including CCA Gold Awards for Great Places to Work and Inclusivity and Accessibility, and a proud Gold member of the Armed Forces Covenant. \n If you require any accommodations or support during the application process, reach out to us. We're here to help ensure an inclusive and accessible experience for everyone. > \n

A great opportunity has arisen for a customer focused field service engineer to join an exciting, innovative company, specialising unique machinery and plant solutions for international companies in the wood, metal, and plastic processing industries. \n Job Description: \n\n • Installation, commissioning, and training of company machinery + Supplementary Products (wood, plastic, metal)\n, • Annual Service, fault finding, repairing, refurbing of company machines + Supplementary Products.\n, • Completing Service reports and timesheets.\n, • Willingness to travel for work within and outside of UK\n\n Beneficial Skills / Qualifications: \n\n • Mechanically skilled technician, with electrical capabilities.\n, • Excellent fault-finding abilities.\n, • Excellent customer service skills.\n, • Excellent team player\n, • Ability to work on own initiative with minimum supervision.\n\n Why Join: \n\n • Part of Innovation: Embrace exciting challenges in high-tech custom machine engineering and actively contribute to success with your ideas.\n, • Teamwork: Take the opportunity to work with a highly successful technician team, here in the UK.\n, • Growth-Oriented Approach: Take advantage of ongoing training, workshops, and a well-structured career development path.\n, • Team-Oriented Company Culture: Work in a supportive team environment focused on collaboration and shared success.\n, • Open, Friendly Culture: We foster a transparent work environment where everyone communicates on a first-name basis.\n

Trainee Service Engineer£38,000 - £42,000 + regular overtime (Double time) + Training + Van + PensionWest Yorkshire \n Are you an electrically biased Engineer seeking excellent dedicated training, day to day variety, a local patch and regular overtime? \n Here is a fantastic opportunity to join an established and expanding company offering structure pay increases, a professional national employer and great support.Here is a fantastic opportunity to join an established and expanding company offering a home based role, regular overtime, training and day to day varietyThe company are a national business involved in waste handling and loading bay equipment. Due to winning new long-term contracts, they are looking to expand their operation in key areas of the UKThe role involves servicing waste handling equipment including balers and compactors through to loading bay equipment such as dock levellers and scissor lifts. You will be provided with training on the specific equipment if you don't already have itThis is a great chance to join an expanding company during an exciting period of growth for the firmThe Role:Service EngineerCovering the North East region.Monday to Friday - 50 hours (Guaranteed 50 hours pay even if you only worked 45)Overtime is time and a half1 in 7 on call rota (£700)Candidate Requirements:Electrical skills - Good*Driving LicenseElix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.Service Engineer, Field Service Engineer, Mechanical, Fitter, technician, Electrical, Hydraulics, Material Handling, Forklifts, Plant, Access, Scissor Lifts, Dock Levellers, Waste handling, compactors, balers, plant, NVQ, HND, HNC, agricultural, engineer, York, Harrogate, Darlington, Catterick, North Yorkshire, Skipton, Yorkshire, Leeds \n \n INDLP

Junior / Trainee CAD Technician (Joinery) \n Morley, Leeds \n £32,000 - £42,000 + Training + Progression + Annual Pay Increase + Early Friday Finish + Bonus + On-Site Parking \n Are you from a Joinery, Woodworking or similar background with the ability to read technical drawings, looking to step off the tools and become a Fully trained CAD Technician? \n This is an excellent opportunity to move away from a workshop-based role and receive full training in CAD, draughting and technical design within a specialist bespoke joinery and woodworking manufacturer. \n You will be joining a small, family-run business where you will work closely with senior staff and directors from day one, gaining hands-on training, long-term development and clear progression as the company continues to grow. \n The company offers annual pay reviews, long-term career development and the opportunity to progress into a senior / management role over time, making this ideal for someone looking to build a proper career in CAD and technical manufacturing. \n The Role: \n\n • Learning to produce CAD drawings for bespoke joinery and woodworking projects\n, • Reading and interpreting technical drawings, sketches and client requirements\n, • Supporting the production of shop drawings, cutting lists and material schedules\n, • Working closely with senior CAD Technicians, workshop teams and management\n, • Full training to become a CAD Technician / Draughtsperson\n, • Monday to Thursday, 7:30am-4:30pm\n, • Friday, 7:30am-3:00pm\n\n The Person: \n\n • From a joinery, woodworking or similar background\n, • Able to read and understand technical drawings\n, • Interested in moving into CAD, design or draughting\n, • Looking to step off the tools into an office-based technical role\n, • Keen to learn, develop and progress long term\n\n \n The Benefits: \n\n • £35,000 - £45,000 starting salary\n, • Full CAD training and development\n, • Progression into a fully trained CAD Technician / Draughtsperson role\n, • Long-term progression into senior / management positions\n, • Annual salary increases\n, • 3pm finish every Friday\n, • Work closely with senior staff and directors\n, • Small, family-run company where you will not just be a number\n, • On-site parking\n\n \n Keywords: Trainee CAD Technician, Junior CAD Technician, CAD Technician, CAD Draughtsperson, Joinery CAD Technician, Woodworking CAD Technician, Joinery, Woodworking, Cabinet Maker, Bench Joiner, Shopfitter, Furniture, Technical Drawings, AutoCAD, Draughting, CAD Design, Leeds, Morley. \n Reference Number: BBBH1 \n This vacancy is being advertised by Roundhouse Recruitment Limited. The services advertised by Roundhouse Recruitment Limited are those of an Employment Agency.

Engineering Assistant \n Location: Leeds, West Yorkshire \n Job Type: Full-Time, Permanent \n Salary: £28,000 - £30,000 \n Hours; 8am - 5pm \n \n We are recruiting an Assistant Centre Manager for a leading engineering business in Leeds. Operating a nationwide network of Service & Supply Centres and mobile service technicians, we provide a rapid-response service to customers across construction, manufacturing, transport, utilities, waste management, agriculture, rail, and industrial sectors. \n \n We are seeking an ambitious and commercially minded Assistant Centre Manager to support the day-to-day operation of our Leeds Service & Supply Centre. \n This is a hands-on leadership role responsible for supporting operational performance, customer service, sales growth, technician productivity, stock management, health and safety compliance, and overall centre profitability. \n \n Key Responsibilities \n\n • Support the Centre Manager in the daily running of the Leeds Centre.\n, • Use mechanical experience to help build up hoses\n, • Coordinate technicians and workshop activities to maximise productivity and service levels.\n, • Monitor job scheduling, response times and completion rates.\n, • Ensure all operational processes are followed consistently and efficiently.\n, • Assist with managing the on-call rota and emergency response requirements\n, • Maintain accurate stock levels and inventory records\n, • Monitor stock usage, ordering and replenishment activities\n, • Ensure company vehicles, equipment and tools are maintained to required standards\n\n

An exciting opportunity has arisen within our business for an experienced Maintenance Technician (Mech/Elec) to be based at our Leeds Maintenance Facility.Reporting to the Shift Team Leader / Production Manager, the successful applicant will join the Maintenance and Repairs Team at our Depot in Leeds and will assist with the day-to-day Maintenance and Repair of our busy Freight Locomotive Fleet.Working as part of a busy 9-man team, you will operate on a 4 on 4off shift pattern in undertaking planned maintenance and repair of our Locomotives coming in for major repairs, maintenance and overhaulWorking days and nights (2 days, 2 nights, 4 off) start and finish times are 7 till 7 averaging a 39-hour week over the course of the yearImmediate and/or flexible starts for interested partiesStarting salary:Over £47k pa plus overtime at enhanced ratesOpportunities to earn up to £1500.00 per unit for accomplishing up to 9 technical modulesExcellent Benefits PackageKey Responsibilities include:Ensure that company engineering standards and procedures are applied and followed, under the post holder's area of control to ensure that the traction and rolling stock meet the provisions of statutory Railway Group Standards and Codes of Practice.The post holder has a general duty to ensure that there is no harm to employees. Contractors, customers or the public.Principal AccountabilitiesAdhere to health and safety and local safety policy requirements, and other safety and technical standards. Comply with all instructions, rules and regulations in force.Maintain, service, fault find and repair locomotives in accordance with the approved maintenance plans as required by the local manager.Ensure all relevant paperwork for examinations and repairs is correctly completed on time and to required company standards.Ensure that materials issued to locomotives and wagons are recorded and reported accurately.Take due care and attention to all tools and instrumentation used.Participate in all relevant training and competency assessment that the post holder is nominated for.Repair and commission all plant and equipment as required from time to time.Assist in the upkeep of maintenance vehicle history files either electronically or hard copies.Assist Team Leaders (under their direction) as required during maintenance and repair of Locomotives.Attend safety/quality and technical briefings as required.Be prepared to work in the areas of necessity to alleviate pressure, under the guidance of suitably qualified staff.Undertake general duties relative to cleanliness of workshop areas, mess room, toilets etc. as required.Assist as required by your immediate line manager.Experience & Knowledge Requirements:At least 3 years broadly based experience of motor vehicle/HGV/Agricultural and Military vehicles plus/or ideally, Traction & Rolling Stock, including maintenance, repair and fault finding.We welcome candidates looking for a career change coming from the Motor Vehicle Industry, particularly Dealerships that teach Automotive Electrical Fault Finding and DiagnosisThe ability to make sound engineering decisions.Basic communication skills, written & oral.Qualifications and TrainingA minimum of NVQ Level 3/or equivalent in an engineering or technical disciplineSuccessful candidates will be required to undertake a Safety Critical Rail related Medical and Drug & Alcohol check plus a basic Security clearance check. A pass in both is required before any offer of employment is finalisedPlease note that this post is subject to standard pre-employment checks including employment references, medical & D&A screening and successful DBS background checks.Plenty of free parking on the Depot and all PPE and training provided.Interested, then please contact Mark on or email your CV to

Company description: \n SGB \n Job description: \n HGV Technician Shift Supervisor – Leeds \n \n Working Hours: Rotating shift pattern Monday to Friday, Week 1: 06:00 to 14:00, Week 2: Tuesday to Friday 12:00 to 00:00 \n \n \n £18.64 – £22.50 per hour plus an excellent benefits package, including: \n \n • In-house training provided to support career progression and increase earnings• Enhanced parental leave • Eligibility to annual bonus scheme• Access to a great loan car scheme • 25 days holiday (increases with service) plus public holidays• Overtime available• Company matched pension scheme • 4x basic salary life insurance• Branded overalls provided• Discounts on major retail outlets, including groceries \n \n An exciting opportunity to join our team at Scania Leeds at the heart of all workshop activity. You will be an organised people leader, with proven workshop experience, who encourages and promotes a team environment. You will manage a team of skilled technicians, providing guidance, support, and ensuring a safe place to work, through excellent Health and Safety protocols. You will be passionate about the efficient running of the Workshop and pro-active communication, delivering a fantastic service to all customers. \n Key responsibilities: \n • Oversee and organise the workshop team whilst managing productivity and efficiencies.• Be the go-to for any support required for Technician and workshop staff.• Be able to provide technical knowledge to your team of technicians as well as customers when required.• Ensure all work is authorised to a high standard.• Promote high standards on job card write up to prevent warranty rejections.• Mentor apprentices to empower them to become the future of tomorrow. \n \n \n Closing Date: 06/08/2026 \n Please note, the closing date for this role is subject to change pending volume of applications. \n \n \n Next steps: \n\n • If you like the sound of this position, please apply today.\n, • Your application will be reviewed by the hiring manager or a member of the Scania Recruitment Team.\n, • If you are successful at this stage, you will be invited to have a conversation and discuss the role further.\n, • You will be welcomed to a tour of the branch and workshop.\n\n \n \n We understand that every candidate is unique, and we strive to accommodate your needs. If you require any adjustments during the application process, please reach out to our Recruitment Team at , we’ll be happy to discuss these with you.

This is an exciting opportunity to join a growing automotive manufacturer with a strong focus on innovation, quality, and customer satisfaction. The business operates across multiple international markets and is committed to developing advanced vehicle technologies, including conventional, hybrid, and electric vehicles. \n With a global presence and an expanding dealer network, the company continues to invest in product development, technical excellence, and aftersales support to deliver an exceptional customer experience. \n \n Key Responsibilities \n\n • Take ownership of reported technical issues and manage cases through to resolution using the technical support system.\n, • Provide field-based technical support to the dealer network and produce detailed visit reports.\n, • Prioritise and manage multiple complex technical cases simultaneously.\n, • Escalate unresolved issues to engineering teams, ensuring timely and customer-focused solutions.\n, • Support Quality teams in the investigation and resolution of product-related concerns.\n, • Assist Customer Experience teams with technical input relating to customer complaints.\n, • Contribute to the ongoing development and improvement of technical support processes and systems.\n, • Review technical documentation received from global teams, ensuring it is suitable for the UK market and identifying any translation requirements.\n, • Develop and deliver technical presentations, seminars, and workshops for technicians across the dealer network.\n, • Create and maintain technical service bulletins, troubleshooting guides, and training materials.\n, • Support Warranty teams by verifying technical failures and providing expert recommendations.\n, • Carry out any other duties relevant to the role as required.\n\n \n Beneficial Skills / Experience: \n\n • Minimum of 5 years' experience in a technical support role within the automotive sector.\n, • IMI Level 4 qualification.\n, • Strong diagnostic and fault-finding skills, with the ability to resolve complex technical issues.\n, • Experience using diagnostic equipment and engineering data logging tools.\n, • Ability to read and interpret engineering drawings and electrical schematics.\n, • Strong communication skills with the ability to influence and engage stakeholders at all levels.\n, • Customer-focused approach with a commitment to delivering excellent service.\n, • Good written and verbal English communication skills.\n, • Proficient in Microsoft Office applications.\n, • Full, clean UK driving licence.\n, • Willingness to travel and stay away from home when required.\n\n\n, • Experience working with electric and/or hybrid vehicles.\n, • Master Technician status, engineering qualification, or equivalent technical experience.\n, • Previous experience supporting dealer networks or field service operations.\n\n

Elevation Recruitment Group are currently recruiting for skilled and detail-oriented Sewing Technicians to support our clients continued growth within an innovative medical device manufacturing environment. \n This is an exciting opportunity to join a highly specialised team working in a clean room environment, contributing to the sewing and assembly of Transcatheter Heart Valves. The role is ideally suited to candidates with excellent manual dexterity, strong attention to detail, and experience in sewing, crafts, embroidery, or other precision-based work. Precision Sewing Technician\n Location: LeedsSalary: £28,500 per year + shift allowance on afternoonsHours: Monday to Friday - mornings OR afternoons - no rotationJob Type: Full-Time, Permanent Key Responsibilities\n\n • Use needles, scissors, forceps, microscopes, and specialised tooling to complete valve sewing and assembly tasks.\n, • Carry out quality checks on your own work and that of colleagues against specifications and defined standards.\n, • Complete all tasks in line with work instructions, GMP, and documentation procedures.\n, • Accurately record traceable manufacturing information within DHRs.\n, • Support wider manufacturing and operational activities as required.\n, • Follow all health, safety, environmental, and clean room procedures.\nSkills & Experience Required\n\n, • Previous experience in sewing, arts & crafts, embroidery, or other high-dexterity work is essential.\n, • Strong hand-eye coordination and ability to use small hand tools.\n, • Excellent attention to detail and ability to follow detailed instructions.\n, • Good communication and documentation skills.\n, • Basic computer literacy.\n, • Ability to work independently and within a team environment.\n, • Experience within manufacturing, GMP, clean room, or medical device environments would be advantageous.\nBenefits\n\n, • £30,000+ annual salary\n, • Monday to Friday working pattern\n, • Company pension\n, • Private medical insurance\n, • Health & wellbeing programme\n, • Generous Holiday Allowance (28 Days + Stats)\n, • Sick pay\n, • Casual dress\n, • Free parking\n\n If you are looking for an opportunity to build a career within a growing medical manufacturing company where precision and quality are highly valued, we would love to hear from you! \n

Elevation Recruitment Group are currently recruiting for skilled and detail-oriented Quality Technicians to support our clients continued growth within an innovative medical device manufacturing environment. Quality Technician\n Location: LeedsSalary: £27,000Hours: Monday to Friday - DaysJob Type: Full-Time, Permanent Key Responsibilities\n\n • Quality Control Support Activities, perform inspection and release of WIP labels and labels to be utilised in the final packaging and labelling of finished goods.\n, • Support Quality Control department administration for documents, records, reviewing and completing DHRs.\n, • Support final valve inspection and testing.\n, • Perform incoming inspection for components and goods against established specifications.\n, • Support the site in preparation for internal audits and regulatory facility inspections.\n, • Perform other related duties or tasks as assigned by Quality Control Team Leader or Quality Engineering Manager. \n, • Complete QC activities associated with the release of labels, product, product packing and incoming raw materials.\n, • Support the business with internal audit preparation\nSkills & Experience Required\n\n, • Minimum of 3 years’ experience working in a manufacturing facility preferably within medical device or pharmaceutical industries.\n, • Quality Control experience within manufacturing facility would be preferable.\n, • Experience with electronic document management systems is desired. \n, • Must possess the ability to manage multiple tasks, with high attention to detail, associated with product and document processing, and task-based processes relating to a cleanroom environment.\n, • Good computer skills required with standard MS Office software applications, including Word, Excel, and electronic equipment (e.g., printer/scanner).\n, • Proficient in spelling, grammar, and communication (verbal and writing) skills.\n, • Ability to collaborate with cross-functional team members\nBenefits\n\n, • Company pension\n, • Free parking\n, • AXA Private medical insurance\n, • Employee Referral program\n, • Company sick pay\n, • 28 days holiday plus public holidays\n, • Discretionary corporate bonus: up to 5%\n\n If you are looking for an opportunity to build a career within a growing medical manufacturing company where precision and quality are highly valued, we would love to hear from you!

CAD Technician (Woodworking / Joinery / Furniture) £40,000 - £45,000 + Progression to Management + Annual Pay Increase + Training + Early Finish on Friday + On-Site Parking + Pension Morley, Leeds Are you a CAD Technician or similar from a Joinery / Woodworking background, looking to join a family-run manufacturer offering clear progression into Management? This is an excellent opportunity to join a small, family-run woodworking manufacturer where you will play a key role in producing technical drawings for bespoke joinery projects, working closely with senior staff, directors, workshop teams and project teams from day one. The company is looking for someone who wants long-term progression, technical responsibility and the chance to grow into a more senior position as the business continues to develop. They offer annual pay reviews, progression into leadership and a close-knit working environment where you will not just be another number. The Role: Producing 2D CAD drawings for bespoke joinery and woodworking projects Creating shop drawings, manufacturing drawings and assembly drawings Preparing cutting lists, material schedules and production documentation Turning client requirements, sketches and architectural drawings into production-ready information Liaising with workshop, production, project and installation teams Working closely with directors and senior staff with progression into management The Person: CAD Technician, CAD Draughtsperson, Technical Designer or similar Background in joinery, woodworking, furniture, cabinetry, shopfitting or commercial interiors Confident using AutoCAD or similar CAD software Able to produce manufacturing / production drawings Looking for progression into a senior technical or management role The Benefits: Clear progression into management Annual salary increases Further training and technical development 3pm finish every Friday Work directly with senior staff and directors Key influence over bespoke joinery and woodworking projects Small, family-run company with a close-knit team culture On-site parking Reference Number: BBBH Keywords: CAD Technician, CAD Draughtsperson, CAD Draughtsman, Joinery CAD Technician, Joinery Draughtsperson, Woodworking CAD Technician, Technical Designer, AutoCAD Technician, AutoCAD Draughtsperson, 2D CAD, Joinery, Woodworking, Bespoke Joinery, Cabinetry, Furniture, Shopfitting, Commercial Interiors, Manufacturing Drawings, Shop Drawings, Cutting Lists, CNC, Leeds, Morley. This vacancy is being advertised by Roundhouse Recruitment Limited. The services advertised by Roundhouse Recruitment Limited are those of an Employment Agency

Senior Biomethane Technician (Mechanical) \n Leeds, Sheffield | £44.4k - £58.3k per annum (dependent on skills and qualifications) \n Full-time | Hybrid – Home/Site based \n Joint-contribution pension from 6% (12% total) – Enhanced maternity & family leave – Life assurance – HolidayPlus – Virtual GP & Employee Assistance Programme plus retail and leisure discounts & many more. \n REQ5660 \n \n Our Green Gas Solutions team plays a crucial role in the safe operation and maintenance of biomethane plants across Yorkshire. We’re now looking for an experienced and motivated Senior Biomethane Technician (Mechanical) to join us and help keep our sites running safely, efficiently, and reliably. \n You’ll be part of a skilled operations team, carrying out daily and weekly site tasks, supporting planned and statutory maintenance, diagnosing faults, and contributing to more complex project work across our biomethane assets. \n SGN Green Gas Solutions is a wholly owned subsidiary of SGN. We own and operate several biomethane gas clean-up plants and network entry facilities, and we also provide operational and maintenance services to third-party sites. \n We deliver safety, warmth, and comfort to homes and businesses. Every role, whether in the office or on the front line, plays a key part in this mission. Here’s how you will contribute… \n As a Senior Biomethane Technician (Mechanical), you’ll take responsibility for the safe and reliable operation of mechanical assets across our biomethane process plants in the Yorkshire region. \n\n • Maintaining mechanical assets in line with legislation, industry standards, and SGN procedures.\n, • Delivering operational and maintenance activities on equipment such as compressors, pumps, valves, and ancillary machinery.\n, • Carrying out planned preventive maintenance, including repairs, overhauls, shutdown work, PSSR inspections, lubrication, filter cleaning, seal checks, and replacement of wear items—always following LOTO, permit-to-work, and hazardous-area procedures.\n, • Completing routine site checks, logging readings, identifying leaks, abnormal vibration, or equipment deterioration.\n, • Responding to alarms and downtime events, carrying out complex fault-finding and restoring safe operation.\n, • Troubleshooting mechanical issues, including alignment checks, vibration/noise investigation, fluid level verification, and safe repair execution.\n, • Working closely with customers and stakeholders, including Gas Distribution Networks, contractors, suppliers, and internal teams.\n, • Participating in a standby rota to provide 24/7 emergency support.\n, • Travelling across a wide geographical area, working both independently and as part of a team.\n\n The role will require close cooperation and communication with our commercial customers and other key stakeholders including Gas Distribution Network representatives, our key contractors and suppliers, internal departments as well our biomethane team. \n This role works across a large geographical area, and you will be working as part of a team as well as on your own, depending on the work you are doing. You will be expected to participate in a standby rota to deliver a 24/7 out-of-hours emergency support service. \n \n What you will need \n\n • A strong understanding of the mechanical engineering discipline within an operations and maintenance environment.\n, • NVQ Level 3 (or equivalent) and completion of a recognised apprenticeship in Mechanical Engineering (minimum 2 years’ experience).\n, • Motivation to learn, develop, and expand your technical and industry knowledge.\n, • Confident IT skills and the ability to use digital systems effectively.\n, • A safe, methodical approach to work, with the ability to react positively when required.\n, • Strong communication and customer-service skills, consistently demonstrating SGN’s core behaviours.\n, • Flexibility to participate in a standby rota and attend sites outside normal working hours.\n, • Willingness to travel across Yorkshire and occasionally to other UK locations including London, the South East, and Scotland.\n, • A full valid driving licence.\n\n Not sure you meet every requirement? \n Research shows some people – particularly women and those from underrepresented backgrounds – may hesitate to apply unless they meet every criteria. At SGN, we value diverse backgrounds, experiences and perspectives. \n If this role interests you but you’re not sure you tick every box, we’d still love to hear from you. You might be just who we’re looking for – now or in the future. \n \n Why SGN? \n SGN leads pioneering research and development for a energy system. Our innovative technologies are transforming the gas industry while keeping people safe and warm. We are an award-winning employer, including CCA Gold Awards for Great Places to Work and Inclusivity and Accessibility, and a proud Gold member of the Armed Forces Covenant. \n If you require any accommodations or support during the application process, reach out to us. We're here to help ensure an inclusive and accessible experience for everyone. > \n

Service Engineer (Tier 1 Automotive / F1) £48,000 - £52,000 + £6,000 Car Allowance + 37.5 Hour Week + UK & International Travel + Tier 1 OEM Clients + Automotive & F1 + Training + 33 Days Holiday + Benefits Manchester, Covering UK Are you a Service Engineer or similar who has the ability to fault-find automated equipment/machinery looking to work on high-tech test equipment found within Tier 1 Automotive and F1 R&D hubs? Do you want an autonomous position, covering the UK with optional work abroad, where you will be staying away from home on average 100 nights a year? In this role you will be servicing and commissioning cutting-edge test equipment used in the research and development of automotive power trains and engines. You'll be trained before becoming fully autonomous, with jobs planned at least 1 week in advanced and no requirement for overtime. Due to the nature of the role, you can expect to be away from home 100 nights a year, but only during the week. This company are specialists in the development of test equipment for the automotive sector. With their equipment found in research, development and manufacturing centres around the world, they are looking towards a bright future and capitalising on recent success with this new vacancy. This role would suit an Commissioning Engineer with knowledge of Automated machinery that can offer autonomy, technical development and the opportunity travel all across the UK and internationally. The Role: • Commissioning and Servicing test equipment across the UK, • Option to travel abroad to Europe, India or the Americas, • Expert training to get you up to speed, • Staying away on average 100 nights a year, • Car Allowance, all expenses paid, • No overtime requirement, • 5 Hours - Flexible start and finish times The Person: • Service Engineer or similar, • Electrical bias, • Ability to fault-find Automated Machinery, PLC's or similar such as Motion controls or CAN interfaces Job Reference BBBH: 26081e Keywords: Service, Commissioning, Engineer, Technician, PLC, CAN, Bus, PID, Tuning, Calibrating, Control, Loops, Controls, Motion, Fault-finding, Fault, Finding, Electrical, Bias, Testing, Automotive, Formula, 1, F1, Leeds, Bradford, Pudsey, Huddersfield, Wakefield If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Are you an experienced Panel Wirer looking for your next opportunity with a business that's genuinely investing in its future? \n I'm currently recruiting on behalf of a well-established and highly respected manufacturing business that is experiencing sustained growth due to continued success and an expanding order book. As a result, they are looking to add a skilled Panel Wirer to their production team. \n This is an excellent opportunity to join a company with an outstanding reputation for quality, where you'll be working on bespoke electrical control panels in a clean, modern manufacturing environment. The business values its employees, offers long-term job security, and provides genuine opportunities for career development. \n As a Panel Wirer, you'll be responsible for building and wiring electrical control panels from engineering drawings and schematics, ensuring every panel is assembled to the highest quality standards. \n Your day-to-day responsibilities will include: \n\n • Reading and interpreting electrical schematics, wiring diagrams and layout drawings.\n, • Wiring and assembling electrical control panels from start to finish.\n, • Installing and terminating cables, relays, contactors, circuit breakers and other electrical components.\n, • Carrying out point-to-point wiring.\n, • Testing completed panels and assisting with fault finding where required.\n, • Working closely with the production and engineering teams to meet project deadlines.\n, • Maintaining high standards of quality, accuracy and health & safety.\n\n What We're Looking For \n\n • Previous experience as a Panel Wirer, Electrical Fitter or Electrical Assembly Technician.\n, • The ability to confidently read and work from electrical drawings and wiring schematics (essential).\n, • Experience wiring industrial control panels.\n, • Excellent attention to detail and pride in producing high-quality work.\n, • A proactive attitude and the ability to work both independently and as part of a team.\n\n Please apply now if this sounds like you.

Role: ICT Consultant - 2 Line \n Location: Yeadon, Horsforth & Guiseley ( Must Drive ) \n Salary: £28,000 - £32,000 \n \n \n Benefits: \n\n • Pension Scheme\n, • Car scheme\n, • Cycle scheme\n, • Eye care scheme \n, • Mental health first aid \n, • Employee assistance programme\n, • Employee recognition scheme\n\n \n Role summary: \n \n This role will involve supporting a primary school where you will be the liaison between your schools and our client, ensuring that they are kept informed about the products and services can provide, and managing customer accounts which will involve maintaining the IT hardware and software across the school sites helping them to improve their ICT provision and enable them to deliver effective teaching and learning through ICT solutions. \n \n To be suitable for this role, you should a passionate interest in IT and a solid technical background, as well as being self-driven and enthusiastic about offering exceptional customer service. \n Being a team player, possessing excellent communication and organisational skills as well as having a cheerful disposition are essential prerequisites for this role. \n \n Our ideal candidate should have at least 2 years' experience in working in a previous ICT Technician/2 line in the education sector although not essential. \n You should have the ability to work independently and exhibit a flair for troubleshooting and a proactive attitude towards identifying potential avenues to enhance the services provided by the team. \n \n Responsibilities include: \n \n\n • Resolve and manage any technical issues that impact the running of the school's function by providing robust technical solutions.\n, • Google Chrome Workspace and experience needed\n, • Installation or repair of computers with standardised applications and networking software, diagnosing, and solving problems that develop in their operations.\n, • Respond to a wide range of technical duties associated with the computer network and desktop services, primarily in connection with existing installations and upgrading of these installations. (Desktop computers, iPads, printers, telephones, scanners, projectors, pa equipment, AV lecterns and hardware)\n\n \n \n INDIT \n Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. \n Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. \n Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position.

Occupational Health Advisor \n Our leading in-house client near to Leeds is looking for an experienced Occupational Health Advisor, to work on a full-time, permanent basis, within their friendly and supportive team. \n The Role: \n\n • Full-time\n, • Salary of £50k\n, • Full OH Remit \n, • Case Management \n, • Health surveillance\n, • Audiometry & Spirometry,\n, • Fitness for work assessments\n, • Pre-placement medicals\n\n Essential: \n\n • NMC Registered Nurse\n, • OH Experience\n\n The successful individual will work as part of a team to deliver an exceptional service to our client and help bring success to the Company. \n Please don't hesitate in contacting us at Gel Resourcing, and we would be more than happy to give you further details. \n Please do get in touch, whether you are an OH Technician, OH Nurse, OHA, OH Manager, OH Physio or an OH Physician, as Gel Resourcing focuses on the recruitment of professionals, UK wide, with in the Occupational Health& Wellbeing markets. \n Being a specialist OH agency has enabled us to become experts in these areas and to offer a quality service to our clients and candidates. Our reputation underlines this, and we have earnt the trust and respect of those in the OH industry. \n Feel free to pass this advert onto any colleagues who may be interested and suitable, we offer a referral bonus for any newly introduced candidates that successfully secure work via ourselves. \n

Job role: Maintenance Engineer £60,000 Basic + Overtime Monday - Friday Health Care Benefits Leading Holiday Allowances Further Qualifications / Training Plans This is an excellent opportunity to join a forward-thinking business where engineering is at the heart of operations. You'll work with industry leading manufacturing equipment, playing a key role in maximising plant performance and driving continuous improvement. Key Responsibilities As a Maintenance Engineer, you will be responsible for ensuring the reliability, efficiency, and performance of production equipment by: Carrying out planned preventative maintenance (PPM) across a wide range of automated manufacturing equipment, including conveyors, robotics, and automated production systems. Responding quickly to breakdowns, carrying out effective fault finding and diagnostics on both mechanical and electrical systems to minimise downtime. Maintaining, repairing, and improving all production machinery and process equipment to ensure maximum operational efficiency. Recording maintenance activities accurately and identifying follow-up work to support continuous equipment reliability. Working closely with production teams to troubleshoot machinery issues, support equipment changeovers and optimise machine performance. Identifying opportunities to improve equipment reliability, production output, quality, health & safety, and operational costs through continuous improvement initiatives. Supporting the installation, commissioning, and optimisation of new machinery and automation projects as the business continues to invest in its manufacturing capabilities. If you are interested in this Maintenance Engineer role, please submit an up-to-date CV through this advert or call the Eko Talent on (phone number removed). Maintenance Engineer / Multi Skilled Engineer / Shift Engineer / Mechanical Engineer / Service Engineer / Technician

This Brigg Scientific Client are a Materials testing company in Leeds and they are looking for additional help in their Testing labs. Main duties include: Preparing test specimens in terms of cutting, bonding, etc Conducting tests and completing laboratory record sheets Recording physical measurements such as timings and distances Checking and signing test reports No specific experience is required for this role, but experience of workshop/Lab work will be beneficial. Recent Graduates looking to gain some hands on experience, or experienced people looking a different challenge are encouraged to apply. The role is initially on a Temp contract for 12 weeks and pay is equivalent to a salary of £26,437 pa. Monday to Friday 9-5

Mobile Diagnostic / Vehicle Technician \n Location: Based in the Leeds area Salary: £35,000 - £38,000 per annum, DOE + Bonus after probation Contract: Full time, permanent \n Storm Auto Services are dedicated to supporting the collision sector, helping repairers calibrate, program and repair ADAS safety systems and other complex electronic systems. \n Our nationwide fleet of highly qualified automotive technici... \n \n ZIPC1_UKTJ

Trainee CAD Technician / Draughtperson Basic Salary Circa £32'000 + Training Excellent Company Benefits Package Leeds, West Yorkshire (Commutable from: Bradford, Huddersfield, Wakefield, Harrogate & Surrounding areas) Ex-Forces Candidates Encouraged to Apply Do you have an interest or basic experience in design or 3D modelling? Are you looking to kick-start your career and join a niche industry within a well-established company that will provide you with full training across a bespoke product line? This is an excellent opportunity to get on board with a highly-skilled engineering team, where you will develop as a subject matter expert and further progress your skillset, whilst designing one-off, solutions-based products. This worldwide manufacturer continues to move from strength to strength and has recently opened a brand-new local facility, making this an exciting time to work for them. You will work on a variety of projects, creating technical drawings and BOM's, with further succession planning to enable you to progress your career. This role suits an Ex-Forces professional with strong IT skills or someone with basic design or 3D modelling experience, looking to move forward with an innovative organisation. The Role Electronics industry Creating technical drawings and BOM's Full training provided across a bespoke product line The Person Ex-Forces encouraged to apply Design or CAD experience would be an advantage Wanting to develop as a subject matter expert and further progress your skillset Reference Number:BBBH(phone number removed) Please click "Apply Now" or contact Kier Rees at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

For more information, contact Lucas Ward at RGB Recruitment We are partnered with an Architectural practice in Leeds that is seeking to expand upon its experienced team. They are a multidisciplinary practice that work across a wide range of sectors. Sectors\n\n • Residential\n, • Healthcare\n, • Retail & Leisure\n, • Masterplanning\n, • Commercial & Industrial\n, • Private Homes\nThey are looking for both Senior and Architectural Technicians to equally play a key role in their team.Requirements\n\n, • Both roles require you to be proficient in Revit and experienced in AutoCAD.\n, • You should be a highly skilled and passionate designer committed to delivering design excellence at all stages of the design and construction process\n, • Understanding of the design process from planning to completion\n, • We are looking for an individual who can consistently contribute to the successful delivery of complex, small, medium, and large-scale projects\n, • Seniors should have an understanding and working knowledge of UK Building Regulations, as well as an understanding of NBS specifications\nBenefits\n\n, • Competitive salary (depending on experience)\n, • 28 days’ annual leave + Bank holidays\n, • Great progression opportunities\n, • Pension\n

THE ROLE \n My client is a firm of engineering consultants with a number of office around the U.K. \n They are now seeking a CIVIL TECHNICIAN with two years + experience post graduation who has some experience of using AutoCAD and Civils 3D and checking design calculations etc. to join them in LEEDS, WEST YORKSHIRE. \n You will work with one of the leading firms of consulting engineers who work on a good rang... \n \n ZIPC1_UKTJ

Architectural Technician (Revit)£35,000 - £40,000 + Training + Progression + Company BenefitsLeedsAre you a Architectural Technician, Technologist or similar with a background working on RIBA Stages 3-6 using Revit looking to join a close-knit, award-winning architectural practice who are known for valuing their employees through investing in future progression opportunities?Do you want to join a thriving practice which cover a wide range of projects including commercial and residential properties?This award winning architectural practice are well established and have been providing services in the industry for over 60 years providing a full range of strategies from master planning to interior design and visuals.On offer is a great opportunity to build a career with a company who offer support and training including the opportunity develop your technical skills in the industry with opportunities for progression within the company. In this role you will work on designs using Revit.This role would suit an Architectural Technician, Technologist or similar with a background working on RIBA Stages 3-6 using Revit looking to join a close-knit, award-winning architectural practice who are known for valuing their employees through investing in future progression opportunities?The Role: Designing and working on plans with Revit Dealing with the lifecycle of projects Office based in Leeds Monday-FridayThe Person: Architectural Technologist Background using Revit day-today Commutable to LeedsReference: BBBH26347Key Words: Architecture, Technologist, Architectural Technologist, Building Regulations, Part 2, Architectural Assistant, Design, AutoCAD, Revit, Commercial, Project, Architect, Leeds, Bradford, Harrogate, Yeadon, Keighley, Burnley.If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Paint Sprayer Location: Leeds Salary: £35,000 - £45,000 I OTE £50,000 Job Type: Full-Time, Permanent Looking for a role where your experience is valued, your earning potential reflects your skills, and you can enjoy a great work-life balance? If you're an experienced Paint Sprayer looking for a fresh opportunity with a professional Bodyshop, this could be the move you've been waiting for. Join a well-equipped workshop where quality repairs, attention to detail and teamwork are at the heart of everything they do. Working Monday to Friday, you'll benefit from a healthy work-life balance while earning a competitive salary of around £45,000 depending on experience. This is an excellent opportunity to become part of a stable business that invests in its people and provides long-term career opportunities within a modern working environment. What's in it for you? ·Competitive salary of circa £45,000 DOE ·Monday to Friday working pattern (8am - 5pm) ·40 hour working week ·Permanent, full-time position ·Modern Bodyshop with high-quality equipment ·Stable and supportive working environment ·Ongoing training and career development opportunities The Role As a Paint Sprayer / Paint Technician, you'll be responsible for delivering high-quality paint finishes across a variety of vehicles, ensuring every repair meets manufacturer and customer expectations. Key responsibilities include: ·Preparing repaired vehicles and panels ready for the paint process. ·Mixing and colour matching paints to manufacturer specifications. ·Applying primer, basecoat and clearcoat to achieve a high-quality factory finish. ·Blending adjacent panels where required to ensure seamless repairs. ·Carrying out polishing, rectification and final quality inspections. ·Maintaining a clean, safe and organised paint booth and working area. ·Working closely with panel technicians and the wider bodyshop team to meet repair deadlines. ·Following manufacturer repair methods and health and safety procedures at all times. About You This opportunity is ideal for an experienced Paint Sprayer / Paint Technician / Paint Refinisher who takes pride in producing exceptional work and consistently achieving high standards. You'll ideally have: ·Previous experience as a Paint Sprayer, Paint Technician or Vehicle Paint Refinisher. ·Recognised qualification in Vehicle Refinishing (NVQ / IMI / City & Guilds / ATA or equivalent), with a commitment to continuous professional development. ·Strong knowledge of modern paint application techniques and repair processes. ·Experience with colour matching and paint mixing. ·Excellent attention to detail and commitment to producing high-quality finishes. ·The ability to work efficiently in a busy Bodyshop environment. ·A positive attitude with strong teamwork and communication skills. ·A full UK driving licence is preferred. Apply Today This is an excellent opportunity to join a well-established Bodyshop offering competitive pay, a Monday-to-Friday working week and long-term career stability. If you're an experienced Paint Sprayer / Paint Technician looking for your next challenge in Leeds, we'd love to hear from you. Apply today for immediate consideration. Job reference number 54102

Refrigeration Service Engineer Yorkshire Up to £48,500 DOE + Door-to-Door Travel + Overtime An excellent opportunity has arisen for an experienced Refrigeration Service Engineer to join a long-established and growing specialist refrigeration contractor covering the Yorkshire area. Established for over 20 years, the business has built an excellent reputation for delivering high-quality commercial refrigeration services to customers across the hospitality, leisure, retail and food service sectors. They pride themselves on investing in their engineers through ongoing manufacturer training, career development and a supportive working environment. This is a varied role working on commercial refrigeration equipment only - no supermarket work. Typical equipment includes cold rooms, bottle coolers, ice machines, under-counter units, integral cabinets and walk-in refrigeration systems for pubs, restaurants, clubs, convenience stores and other commercial premises. The Role Service, maintenance and repair of commercial refrigeration equipment Fault finding and diagnosis across a range of refrigeration systems Planned preventative maintenance and reactive breakdowns Providing a high level of customer service while working independently across the Midlands Requirements Time-served apprenticeship or equivalent NVQ/City & Guilds in Refrigeration & Air Conditioning F-Gas (C&G 2079 or equivalent) Full UK Driving Licence Previous experience working on commercial refrigeration systems Package Salary up to £48,500 depending on experience 42.5-hour working week Paid door to door 33 days holiday Ongoing manufacturer training and development 1 in 4 on-call rota Overtime available Company van and fuel card with private use Keywords: Refrigeration Engineer, Refrigeration Service Engineer, F-Gas Engineer, Commercial Refrigeration Engineer, Service Engineer, Field Service Engineer, Cold Rooms, Ice Machines, Bottle Coolers, Refrigeration Technician. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Heating Engineer - Heat Pump & Boiler Manufacturer Are you a Gas Engineer, Oil Engineer, OFTEC Heating Engineer, Renewables Engineer or Heat Pump Engineer with Fault-finding experience? Do you live in the BD/PR/YO and Surrounding Area? Do you want to work for a leading Heating Manufacturer?The Job: Home based and working across the Yorkshire area, you will undertake warranty & technical support of a range of products, focusing on Heat Pumps & renewables, but also boilers & cylinders. You will be a self-motivated Gas Engineer, Heat Pump Engineer, Heating Engineer or Renewables Engineer, organised with good customer facing skills and some fault-finding ability. Product training will be provided to those who possess; Excellent customer facing/communication skills Previous Boiler or Heat Pump Fault-finding or Breakdown experience Full UK Driving Licence - required Experience of working on either Boilers, Solar Thermal, Air Source Heat Pumps, along with unvented cylinders, biomass, smart controlsHours: Monday to Friday - 39.5hr Week 20 Saturdays a year paid in OT or time in lieu No CalloutRemuneration: PAYE directly employed with the a Boiler & Heat Pump Manufacturer. £43,000 basic + Saturday OT Van - Mercedes Vito, fully expensed with private use 31 days holiday (23+Banks) Uniform, laptop, uniform, pension + ALL tools Healthcare/Sick Pay/Life Assurance Manufacturer trainingIf you are a Gas Engineer, Boiler Engineer or Heat Pump Engineer live in the Highlands area & interested? Experience; Gas Engineer, Heating Engineer, Gas Technician, Boiler Engineer, Worcester Bosch Engineer, Vaillant Engineer, Viessman Engineer, Baxi Engineer, British Gas Engineer, Homeserve, Ideal Engineer

Engineering Assistant Location: Leeds, West Yorkshire Job Type: Full-Time, Permanent Hours: 8am - 5pm We are recruiting an Engineering Assistant for a leading engineering business in Leeds. Operating a nationwide network of Service & Supply Centres and mobile service technicians, we provide a rapid-response service to customers across construction, manufacturing, transport, utilities, waste management, agriculture, rail, and industrial sectors. We are seeking an ambitious and commercially minded Assistant Centre Manager to support the day-to-day operation of our Leeds Service & Supply Centre. This is a hands-on leadership role responsible for supporting operational performance, customer service, sales growth, technician productivity, stock management, health and safety compliance, and overall centre profitability. Key Responsibilities 1. Support the Centre Manager in the daily running of the Leeds Centre. 2. Use mechanical experience to help build up hoses 3. Coordinate technicians and workshop activities to maximise productivity and service levels. 4. Monitor job scheduling, response times and completion rates. 5. Ensure all operational processes are followed consistently and efficiently. 6. Assist with managing the on-call rota and emergency response requirements 7. Maintain accurate stock levels and inventory records 8. Monitor stock usage, ordering and replenishment activities 9. Ensure company vehicles, equipment and tools are maintained to required standards

An opportunity has arisen for a Graduate Engineering Geologist to join a well-established engineering consultancy delivering civil, structural and geotechnical solutions across a range of projects for public and private sector clients. As a Graduate Engineering Geologist, you will support geotechnical projects through technical assessments, site investigations, reporting and engineering solutions while developing your professional expertise. This full-time role offers a salary range of £28,000 - £32,000 and benefits. Some travel to sites is required. You will be responsible for: Supporting the preparation of desk studies, interpretative reports and geotechnical documentation. Assisting with ground models, geotechnical assessments and engineering design solutions. Applying geological and geotechnical knowledge to support project delivery. Supporting ground investigation works, including site visits and coordination activities. Maintaining accurate site records, reports and project documentation. Assisting with project management tasks, including monitoring deadlines, budgets and deliverables. Contributing to technical submissions, tenders and fee proposals with guidance from senior team members. Working with internal teams, clients, contractors and other stakeholders to support successful project outcomes. Developing technical knowledge across areas including earthworks, drilling, grouting, contaminated land and geotechnical design. What we are looking for: A degree in Geology or a related discipline (essential). Have 1-3 years of experience within engineering geology, ground investigation or geotechnical consultancy. Experience supporting ground investigations and producing interpretative reports. Understanding of geological principles, ground investigation methods and geotechnical engineering practices. Strong attention to detail with a proactive approach to learning and development. Highly skilled in Microsoft Office applications. CSCS card (or willingness to obtain if successful). * Full UK driving licence is essential due to site travel requirements. This is a great opportunity for a Graduate Engineering Geologist looking to build their career within a supportive engineering consultancy environment. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003. Relevant background: Graduate Engineering Geologist, Assistant Engineering Geologist, Engineering Geologist, Graduate Geotechnical Engineer, Junior Geotechnical Engineer, Geotechnical Engineer, Geotechnical Consultant, Ground Investigation Engineer, Site Investigation Engineer, Graduate Geo-Environmental Consultant, Geo-Environmental Engineer, Engineering Geologist Consultant, Geotechnical Technician, Graduate Civil Engineer (Geotechnical), Geology Graduate

Trainee Service Engineer £38,000 - £42,000 + regular overtime (Double time) + Training + Van + Pension West Yorkshire Are you an electrically biased Engineer seeking excellent dedicated training, day to day variety, a local patch and regular overtime? Here is a fantastic opportunity to join an established and expanding company offering structure pay increases, a professional national employer and great support. Here is a fantastic opportunity to join an established and expanding company offering a home based role, regular overtime, training and day to day variety The company are a national business involved in waste handling and loading bay equipment. Due to winning new long-term contracts, they are looking to expand their operation in key areas of the UK The role involves servicing waste handling equipment including balers and compactors through to loading bay equipment such as dock levellers and scissor lifts. You will be provided with training on the specific equipment if you don't already have it This is a great chance to join an expanding company during an exciting period of growth for the firm The Role: Service Engineer Covering the North East region. Monday to Friday - 50 hours (Guaranteed 50 hours pay even if you only worked 45) Overtime is time and a half 1 in 7 on call rota (£700) Candidate Requirements: Electrical skills - Good *Driving License Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Service Engineer, Field Service Engineer, Mechanical, Fitter, technician, Electrical, Hydraulics, Material Handling, Forklifts, Plant, Access, Scissor Lifts, Dock Levellers, Waste handling, compactors, balers, plant, NVQ, HND, HNC, agricultural, engineer, York, Harrogate, Darlington, Catterick, North Yorkshire, Skipton, Yorkshire, Leeds INDLP

Remedial Plumber – Leeds £34000-£36000 + Van + Benefits + Overtime Specialist Building Services Consultancy who provide a host of services, are currently looking for 2x Remedial Plumbers to join their compliance team and cover projects around the North and North-East of the UK. Some sites may take you out of this region, but this would be infrequent. To apply for the Remedial Plumber role, the successful candidate will come with the following background. 5+ years post qualification experience working as a Remedial Plumber or Maintenance Plumber carrying out PPM, reactive and where needed upgrades/small installs. Have a stable career track record demonstrating longevity and commitment to all client contracts that they work on. Be experienced working on commercial sites including offices, health care, education and retail. Be Level 2 NVQ in Plumbing as a minimum. Full driving license and be DBS checked (enhanced preferred). Basic knowledge of legionella compliance would be beneficial, but training is provided. The Remedial Plumber will work on a range of sites, will where possible be given regional work and will carry out duties including – PPM, deadleg removals and capping, stabbing points, TMV install/servicing, pipe refits/existing modifications, routine water hygiene monitoring and testing. Working to a 40-hour week, our client offers optional overtime, excellent opportunities to pick up new training and additional qualifications. With a company vehicle, fuel card and expenses card, for more information, please email Nick Lewis with a copy of your CV Similar job titles and keywords - Water Hygiene Technician, Water Treatment Technician, Legionella Compliance Technician, Legionella Consultant, Water Monitoring Technician, Legionella Technician, Legionella Surveyor, Water Risk Assessor, Water Systems Assessor, Environmental Risk Assessor, Water Treatment Engineer, Cooling Tower Specialist, Plumber, Water Hygiene Technician, Maintenance Technician, Water Treatment Engineer, Legionella Risk Assessor, Environmental Water Technician, Water Compliance Engineer, Water Safety Technician, Remedial Plumber, Water Softener Engineer, Field Service Technician, Water Services Engineer, Plumbing and Water Hygiene Technician. Commutable Locations - Leeds, York, Bradford, Wakefield, Harrogate, Huddersfield, Halifax, Dewsbury, Batley, Keighley, Wetherby, Castleford, Ripon, Knaresborough, Thirsk, Skipton, Colne, Barnsley, Doncaster, Rotherham

This is an exciting opportunity to join a growing automotive manufacturer with a strong focus on innovation, quality, and customer satisfaction. The business operates across multiple international markets and is committed to developing advanced vehicle technologies, including conventional, hybrid, and electric vehicles. With a global presence and an expanding dealer network, the company continues to invest in product development, technical excellence, and aftersales support to deliver an exceptional customer experience. Key Responsibilities Take ownership of reported technical issues and manage cases through to resolution using the technical support system. Provide field-based technical support to the dealer network and produce detailed visit reports. Prioritise and manage multiple complex technical cases simultaneously. Escalate unresolved issues to engineering teams, ensuring timely and customer-focused solutions. Support Quality teams in the investigation and resolution of product-related concerns. Assist Customer Experience teams with technical input relating to customer complaints. Contribute to the ongoing development and improvement of technical support processes and systems. Review technical documentation received from global teams, ensuring it is suitable for the UK market and identifying any translation requirements. Develop and deliver technical presentations, seminars, and workshops for technicians across the dealer network. Create and maintain technical service bulletins, troubleshooting guides, and training materials. Support Warranty teams by verifying technical failures and providing expert recommendations. Carry out any other duties relevant to the role as required. Beneficial Skills / Experience: Minimum of 5 years' experience in a technical support role within the automotive sector. IMI Level 4 qualification. Strong diagnostic and fault-finding skills, with the ability to resolve complex technical issues. Experience using diagnostic equipment and engineering data logging tools. Ability to read and interpret engineering drawings and electrical schematics. Strong communication skills with the ability to influence and engage stakeholders at all levels. Customer-focused approach with a commitment to delivering excellent service. Good written and verbal English communication skills. Proficient in Microsoft Office applications. Full, clean UK driving licence. Willingness to travel and stay away from home when required. Experience working with electric and/or hybrid vehicles. Master Technician status, engineering qualification, or equivalent technical experience. Previous experience supporting dealer networks or field service operations

Motor Vehicle Lecturer Location: Yorkshire Job Type: Full Time | Permanent Salary: £30,000 - £36,000 per annum Are you an experienced Motor Vehicle Technician looking for a new challenge? Or are you already teaching and looking for your next opportunity? We are looking for passionate and motivated Motor Vehicle Lecturers to join our growing automotive team. This is an excellent opportunity to inspire the next generation of automotive professionals while enjoying excellent work-life balance, career development and job security. No teaching qualification? No problem. We welcome applications from unqualified lecturers. If you hold an NVQ Level 3 in Motor Vehicle (or equivalent) and have industry experience, we'll provide all the training and support you need to gain a recognised teaching qualification while you work. You'll deliver engaging theory and practical lessons across Level 1 to Level 3 Motor Vehicle Service and Repair programmes, helping learners develop the technical knowledge and practical skills needed to progress into employment or apprenticeships. The Role As a Motor Vehicle Lecturer, you will: Deliver engaging classroom and workshop-based teaching. Teach learners across Level 1, Level 2 and Level 3 Motor Vehicle programmes. Support full-time students, adult learners and apprentices. Inspire, motivate and develop the next generation of automotive technicians. Plan lessons, assess learner progress and provide constructive feedback. Maintain accurate learner records and contribute to high standards of teaching, learning and assessment. Promote a positive, safe and professional learning environment. What We're Looking For NVQ Level 3 in Motor Vehicle (or equivalent). Recent industry experience within the motor vehicle sector. Enthusiasm for developing and inspiring future technicians. Good communication and organisational skills. Basic IT skills, including Microsoft Office. Teaching experience is not essential. If you're new to education, we'll support you in achieving a recognised teaching qualification. What We Offer Competitive salary of £30,000 - £36,000 per annum. Full teacher training and funded professional development. Excellent opportunities for career progression. 40 - 50 days of annual leave 28.68% pension contribution A supportive working environment where you can make a genuine difference to people's lives while sharing your industry expertise.Important Notice Dovetail and Slate is a specialist education recruitment company. If this role isn't quite right, we welcome your CV and a call to explore other opportunities. We are committed to safeguarding children and vulnerable adults. All appointments are subject to satisfactory vetting, including a right to work check and, where relevant, an enhanced DBS, PVG (Scotland), or EWC (Wales) check, in line with Keeping Children Safe in Education. Dovetail and Slate Ltd ((phone number removed)) acts as an Employment Agency and an Employment Business under the Conduct of Employment Agencies and Employment Businesses Regulations 2003. We are an equal opportunities employer. By applying, you consent to your data being processed for recruitment purposes in line with our Privacy Policy. Because education matters. © Dovetail and Slate Limited. Because education matters. Dovetail and Slate Limited ((phone number removed)) acts as an Employment Agency

Insurance Manager (Automotive Aftersales) Based, West Yorkshire, Package 55-60k plus bonus plus company benefits. Hybrid working. Overview of position We are seeking a highly organised and analytical Insurance Manager specialising in Automotive Aftersales. The successful candidate will oversee insurance operations related to vehicle service and parts, ensuring compliance with company policies and industry standards. This role offers an excellent opportunity to lead insurance processes, optimise claims management, and contribute to the overall efficiency of the aftersales department. The position is paid and suitable for individuals with a keen eye for detail and strong organisational skills. Oversee the Parts process and ensure that savings for parts supply are maximized for the benefit of the Company plus support future strategy and objectives. Oversee the audit of dealers through the CQA team, pinpointing the dealers that require audit and ensuring a schedule of dealer audits is planned and the CQA audit team are efficiently organized. Manager a small team of underwriters. Some travel required including overseas to facilitate audits. Key job functions To be the technical ‘go to’ expert on technical vehicle queries that the underwriting team may have. Maintain wide industry knowledge of vehicles and mechanical issues Ensure all underwriting philosophies and procedures are followed according to Company and market conditions. Proactively manage relationships and communications with claims administrators to promote improvements to risk management Manage customer complaints through to resolution and act as point of contact for Financial Ombudsman Service Conduct site surveys to assess suitability for vehicle storage Monitor the performance of dealers and identify audit opportunities. Take full ownership of the Audit Programme. Proactively manage the programme to ensure that Underwriting Managers understand the business imperative and influence the Underwriting Managers to make sure audits take place according to the timetable planned and agreed with the CUO. Ensure the audit process constantly evolves in a dynamic way to keep pace with business needs. Take opportunities to liaise with colleagues in other parts of the business to get feedback on personal performance. Proactively liaise with all stakeholders prior to audits to ensure that key areas are focused on during the audit. Ensure that the audits are thorough and that all areas of weakness are identified and that recommended actions are well thought through and have high intellectual rigour. Highlight the key action points and follow up on a regular basis to ensure that they have been implemented with the result that we have made change happen. If actions have not been implemented in accordance with agreed timescales challenge the business to resolve them. Provide reports on audits, parts savings and registration audits to the Coverholder Oversight Committee To respond to all internal and external underwriting and claims related queries relating to programmes and to involve other Departments (e.g. Claims or Actuarial / Pricing) as necessary before issuing a response. Ensure that personnel are adequately managed with 1-2-1s, development plans and succession plans in place for the teams you are responsible for Constantly review the adequacy of resource and people plans for the areas for which you are responsible Qualifications, experience required. Experience in Automotive Management especially in the Aftersales Market, bachelor’s degree in business management (preferred). Must be at least NVQ level 3 Qualified in vehicle maintenance and repair, Senior or Master technician preferred. Minimum of 5 years’ experience in claims and administration environment is essential. Minimum of 5 years’ experience of claims handling of Aftersales insured products is strongly desirable. Knowledge of FCA regulation, FOS procedures, Conduct Risk, TCF and other relevant regulation is essential. Proven experience in: Complex decision making on complex customer and claims issues; essential The motor trade and knowledge of how motor vehicles work, is essential. * Financial acumen relating to insurance performance on an underwriting and financial year basis; is desirable MS Office competence is essential

GBR Recruitment Ltd are working exclusively with a leading Groundcare machinery business recruiting for an experienced Groundcare Technician / Groundcare Machinery Engineer to work across a multitude of different groundcare / landscaping & greenkeeping machinery inc. compact tractors, large scale rotary mower & ride-on mowers, slope & remote-controlled mowers, utility vehicles (UTVs/Gators), attachments & more. This is a great opportunity to test your groundcare machinery engineering skills on a wide variety of machinery & vehicles, keeping your daily workloads varied & interesting. As the Agricultural Technician you will work 50% of your time in the workshop & 50% of your time out in the field on customers sites across the South Yorkshire area. Duties: Carry out groundcare vehicle & machinery maintenance for customers Diagnose groundcare machinery faults & carry out repairs both on site & in the workshop Complete all machinery servicing & machinery repairs to a high standard Assemble & prepare (PDI) all new & used machinery, ready for delivery Give technical & operating advice to customers Attributes: Level 3 qualified in an engineering discipline (L2 also considered) Groundcare, greenkeeping, turfcare, agricultural, plant machinery or similar machinery experience is required for this role Prepared to work out in the field & in the workshop when needed Flexible with working hours & working patterns for peak seasons Strong communicator & used to working in a customer facing role Sheffield, Barnsley, Rotherham, Doncaster, Barnsley, Wakefield, Leeds, Derby, York, Worksop, Retford, Gainsborough, Mansfield, Pontefract, Wakefield, Huddersfield & other area close to these locations. Interviews to take place ASAP, apply today