Trabajos quality improvement en CoventryCrear alertas

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities • Proactive and preventative maintenance tasks on a wide range of site equipment, • Carry out reactive repairs and fault diagnosis in a live distribution warehouse, • Use the latest tools to maximise equipment effectiveness, • Uphold all health and safety policies and practices, • Support the development and progression of on-site apprentices, • Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. • NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Advanced proficiency in the local language verbally and in writing, • Associate's degree in Mechnical or Electrical, • Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards, • Experience with robotic operation and maintenance, • Experience in condition-based monitoring, • Experience working with print and apply machines, • Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Operations is the beating heart of Amazon. This key part of our business makes sure we fulfil and dispatch orders efficiently so that our customers get their items on time. As an Area Manager, you’ll make sure your site is running as smoothly as it should so that we can meet customer demand. You will be leading a team that helps keep our operations safe, efficient, and of a high quality and taking on a number of projects across our network to drive productivity. Key job responsibilities • Create, oversee, and drive a culture of safety and wellbeing, • Analyse and implement changes to keep quality and productivity at a consistently high level, • Oversee projects to streamline processes, optimize productivity and increase quality of service for customers within your area of responsibility, • Analyse shift performance against relevant business objectives, and put in place actions to improve our operational excellence, • Work collaboratively with management-level colleagues to standardize shift practices A day in the life You’ll work on a shift pattern at one of our sites, making sure it is as productive as it can be. Your main focus will be to own and drive a culture of safety and uphold quality and shift performance standards. You’ll also oversee process improvements within your area and drive implementation. A typical day is varied, including everything from routine team management and daily operational responsibilities to process improvement and wide-scale operational contingency tasks. You’ll also be a role model and mentor to new managers. • Bachelor's degree or equivalent in business, operations, logistics, supply chain or engineering, • Experience working effectively across cross-functional teams and partnering well with people at all levels within an organization, • Experience managing, motivating, and influencing team behaviors, • Experience demonstrating problem solving and root cause analysis, • Experience completing complex tasks quickly with little to no guidance and react with appropriate urgency to situations that require a quick turnaround, • Work a flexible work schedule including evenings, overnights, and weekends, • Experience within a distribution center, logistics, or manufacturing environment Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

CMM Programmer Location: Coventry Commutable from: Nuneaton, Rugby, Leamington Spa, Bedworth, Solihull, Hinckley Salary: Up to £21.00 - £23.00 per hour DOE Hours: Monday to Thursday: 07:00 - 16:45 Permanent 4 day week Friday overtime available at enhanced rates Benefits Permanent 4 day working week Enhanced overtime rates for Friday working Company pension scheme Stable long term permanent opportunity Modern aerospace manufacturing environment Training and development opportunities About the Company Our client is a well-established aerospace manufacturing business specialising in the production of high-precision components for safety-critical applications. Operating within a highly regulated environment, they supply precision engineered parts to leading aerospace programmes and are recognised for their commitment to quality, technical excellence, and continuous investment in advanced manufacturing technologies. The Role This is an excellent opportunity for an experienced CMM Programmer to join a growing quality team within a modern aerospace manufacturing environment. The successful candidate will be responsible for programming, operating, and maintaining CMM inspection processes, ensuring all components meet strict aerospace quality standards and customer specifications. Responsibilities include Programming CMM machines using MCOSMOS software Creating and editing inspection programs for complex aerospace components Conducting first-off, in-process, and final inspection activities Interpreting complex engineering drawings and GD&T specifications Supporting root cause investigations and non-conformance activities Ensuring compliance with aerospace quality standards and procedures Working closely with production and quality teams to resolve inspection issues Maintaining accurate inspection documentation and reports Supporting continuous improvement initiatives within the quality department About You Strong MCOSMOS programming experience Experience working within aerospace or other highly regulated industries Ability to read and interpret engineering drawings and GD&T Experience using a range of metrology and inspection equipment Strong understanding of quality standards and inspection processes Excellent problem-solving and analytical skills Ability to work independently and as part of a team How to Apply To apply for the CMM Programmer position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps. INDMAN

Quality Technician | Competitive Hourly Rate | Likely IR35 Friendly | Contract Opportunity \n A contract opportunity has become available for an experienced Quality Technician to support an established manufacturing business. The successful contractor will focus on carrying out product and process audits, supporting non-conformance activities, maintaining quality standards, and driving continuous improvement initiatives across manufacturing operations. \n Overview - \n Working closely with Production, Quality and Warehouse teams, you will help ensure products consistently meet customer specifications and manufacturing standards. This role would suit Quality Technicians, Manufacturing Quality Technicians and Quality professionals who enjoy working within fast-paced manufacturing environments and supporting hands-on shop-floor quality activities. \n Quality Technician responsibilities include: \n\n • Carrying out daily product and process audits throughout manufacturing operations.\n, • Reviewing products during manufacture to ensure customer specifications and quality standards are met.\n, • Supporting non-conformance investigations, quarantine activities and corrective actions.\n, • Assisting continuous improvement initiatives to improve product quality and manufacturing performance.\n, • Preparing quality reports and maintaining quality documentation and audit records.\n, • Working closely with Production and Warehouse teams to ensure quality and manufacturing procedures are consistently followed.\n\n Quality Technician desirable skills and experience: \n\n • Previous experience working within a Quality Technician or even a Quality Engineer position.\n, • Experience carrying out product and process audits within a manufacturing environment.\n, • Ability to read and interpret engineering drawings.\n, • Understanding of non-conformance management and quality control activities.\n, • Good attention to detail and a proactive approach to problem solving.\n, • Technical qualifications such as an Apprenticeship, HNC, HND or equivalent practical manufacturing experience would be advantageous.\n\n What's on offer for this Quality Technician role: \n\n • Competitive hourly rate (DOE).\n, • Immediate start available.\n, • Initial contract with the potential for extension.\n, • Hands-on manufacturing quality position with varied responsibilities.\n, • Growing manufacturing environment with long-term opportunities.\n\n If you are interested in this Contract Quality Technician opportunity, please apply through this advert immediately. \n ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

Owen Daniels are successful manufacturing business looking to strengthen its Quality function with the appointment of a Quality & Compliance Engineer. This is a varied role that sits at the heart of the manufacturing operation, ensuring processes are clearly defined, effectively controlled and consistently followed. Working across Engineering, Production, Supply Chain and Quality, you'll help maintain robust manufacturing standards, support compliance with customer and regulatory requirements, and drive continuous improvement throughout the business. You'll take ownership of manufacturing documentation, support the development of new and existing production processes, and ensure the Quality Management System remains effective as the business continues to grow. Key responsibilities Develop, review and maintain controlled manufacturing documentation, including work instructions, route cards, Bills of Materials and manufacturing standards. Support the introduction of new products and manufacturing processes, ensuring documentation is accurate and production-ready. Maintain document control, revision management and change control in line with the Quality Management System. Work closely with production teams to ensure manufacturing processes are understood, implemented and consistently followed. Deliver process training and support the rollout of new or updated procedures. Monitor compliance with manufacturing standards and support investigations into process non-conformance. Participate in internal and customer audits, supporting corrective and preventive actions where required. Contribute to continuous improvement activities, helping to improve quality, efficiency and standardisation across the manufacturing operation. Work collaboratively with Engineering, Quality, Supply Chain and Project teams to ensure manufacturing processes meet customer and business requirements.About you We're looking for an organised and proactive quality professional with experience gained within a manufacturing environment. You'll ideally have: Experience in a Quality, Compliance, Quality Systems or Manufacturing Engineering role. A good understanding of manufacturing processes and quality management systems. Experience creating and maintaining controlled documentation and manufacturing procedures. Knowledge of document control, change management and process compliance. Experience supporting audits and continuous improvement activities. Strong communication skills with the ability to work effectively across multiple departments. A methodical approach, excellent attention to detail and a passion for improving standards.In return, you'll join a collaborative business where you'll have the opportunity to influence manufacturing standards, improve processes and play a key role in maintaining product quality and operational excellence. If you're looking for a role where you can make a genuine impact across quality, compliance and manufacturing, we'd love to hear from you

Our client Coventry City Council is looking for an Approved Mental Health Professional to join their team. Job Purpose\n To undertake statutory duties under the relevant mental health legislation (such as the Mental Health Act 1983 in England and Wales), including coordinating Mental Health Act assessments, making independent decisions about compulsory admission where appropriate, and ensuring that the rights, welfare, and least restrictive options for individuals experiencing mental disorder are upheld. Key Responsibilities\n\n • Undertake assessments under the Mental Health Act and associated legislation.\n, • Coordinate Mental Health Act assessments involving medical practitioners and other professionals.\n, • Decide whether to make applications for detention under the Mental Health Act, exercising independent professional judgment.\n, • Ensure that individuals' human rights and legal safeguards are protected throughout the assessment process.\n, • Consider less restrictive alternatives to hospital admission whenever possible.\n, • Complete comprehensive risk assessments and formulate risk management plans.\n, • Work collaboratively with multidisciplinary teams, including psychiatrists, nurses, social workers, psychologists, and community services.\n, • Liaise with families, carers, advocacy services, police, ambulance services, and other partner agencies.\n, • Prepare accurate, timely, and legally compliant reports and documentation.\n, • Attend court hearings, tribunals, safeguarding meetings, and case conferences when required.\n, • Participate in an out-of-hours AMHP rota where applicable.\n, • Maintain up-to-date knowledge of mental health legislation, case law, and professional guidance.\n, • Contribute to service development, quality improvement, and professional training.\n\n Benefits of working with Remedy \n\n • A personal one-one service from your highly experienced dedicated consultant.\n, • Top tier supplier across London giving us first access to jobs\n, • Referral bonus - up to £250* per person placed.\n, • Double payrolls each week.\n\n \n *Terms & Conditions apply \n You will be required to fully register with Remedy for all locum positions. \n Remedy Social Care is a APSCo Standard agency and is committed to safeguarding and promoting the welfare of the vulnerable. Successful applicants will be required to undertake an Enhanced Disclosure via the DBS. Our objective is to be an equal opportunities employer and we welcome applications from everyone with suitable skills and ability regardless of race, colour, nationality, ethnic or national origin, gender, disability, sexual orientation, age, religion or belief. All applications will be accepted and reviewed solely on merit.

A leading aerospace manufacturing organisation is seeking an experienced Quality Engineer to support the delivery of high-integrity products in a highly regulated environment. This role plays a key part in assuring compliance, driving defect reduction and supporting continuous improvement across operations, suppliers and customers.Quality EngineerPermanentMonday to Thursday: 8:00am – 4:30pm, Friday 8:00am – 3:30pmCompetitive Salary + Benefits + Bonus CoventryQuality EngineerKey Responsibilities\n\n • Assure compliance to aerospace quality standards and regulatory requirements including AS9100, AS13100, AS9102 and Part 21.\n, • Lead product and process assurance activities such as audits, First Article Inspection reviews and quality risk mitigation.\n, • Drive containment, root cause analysis and corrective actions using structured problem-solving tools (8D, A3, RCA).\n, • Monitor and improve quality performance metrics, supporting defect reduction and Zero Defect initiatives.\n, • Act as a key quality interface across operations, engineering, suppliers and customers, supporting audits and issue resolution.\nQuality EngineerEssential Experience / Skills / Qualifications\n\n, • Proven Quality Engineering experience within aerospace or a similarly regulated manufacturing environment.\n, • Strong working knowledge of AS9100, AS9102, ISO9001 and aerospace regulatory frameworks is desirable.\n, • Ability to interpret engineering drawings, technical specifications and customer requirements.\n, • Hands-on experience with APQP, PFMEA, DFMEA, PPAP, Control Plans and Root Cause Analysis.\nQuality EngineerCompany Benefits\n\n, • Free on-site car parking\n, • An on-site restaurant and subsidised food\n, • Pension Scheme up to 10% company contribution\n, • Employee Health & Wellbeing Programme\n, • Employee Discounts\n, • Career development within a high-performing aerospace environment\n, • 10% Bonus\n

36 hours - Sun, Mon, Tue Manufacturing Coventry £55,000 + bonus + benefits Ref 10463The RoleA great opportunity with a well-established manufacturing business where you'll support maintenance and reliability across a busy production facility. As the Maintenance Engineer you'll respond to breakdowns, carry out reactive and planned maintenance, and use condition monitoring to minimise downtime. You'll also contribute to continuous improvement, identify opportunities to enhance performance and support site upgrades.The CompanyA rapidly growing UK based manufacturer with a 50-year track record of producing high-quality construction products, combining innovation with craftsmanship for British and international markets.The Candidate \n\n • 5+ years maintenance experience in manufacturing\n, • Multi-skilled (mechanical and electrical)\n, • Engineering qualification (Level 3+)\n, • Experience in a hands-on, fast-paced environment\n, • Knowledge of maintenance systems and continuous improvement\n, • Good planning and organisational skills\n, • IPAF/IOSH (or working towards) advantageous\n\n How to ApplyTo learn more about this role submit your CV in confidence, including salary expectations, quoting reference 10463.

As a Commercial Account Handler you will be responsible for managing client relationships, policy administration, risk assessment, compliance, and new business development. Your role will involve providing exceptional customer service, ensuring policy accuracy, and staying updated on industry trends and regulations. \n \n Responsibilities: \n\n • Build and maintain strong client relationships\n, • Assist clients with policy enquiries, changes, and renewals\n, • Analyse clients' risk profiles and identify coverage improvement opportunities\n, • Ensure policy compliance with industry regulations\n, • Maintain accurate client documentation and deliver regular reports\n, • Identify opportunities for upselling and cross-selling insurance products\n, • Stay updated on insurance products and industry best practices\n, • Provide exceptional customer service and address client concerns promptly\n, • Conduct quality checks on documentation and files\n\n \n Qualifications: \n\n • Strong knowledge of insurance products and industry regulations\n, • Exceptional communication and interpersonal skills\n, • Attention to detail and accuracy in policy management\n, • Strong problem-solving and analytical abilities\n, • Proficiency in Acturis insurance software and Microsoft Office Suite\n, • Commitment to ethical business practices and compliance with industry standards\n\n \n Day-to-day: \n\n • Collaborate with clients, underwriters, and team members\n, • Stay informed about industry trends and emerging risks\n, • Keep clients informed about changes in regulations and their implications\n, • Participate in ongoing training and professional development\n, • Undertake other duties as appropriate and as requested by the line manager\n\n \n Benefits: \n\n • Competitive salary (up to £40,000)\n, • Health and wellness benefits\n, • Professional development opportunities\n, • Collaborative and inclusive work environment\n, • Opportunities for career growth and advancement\n\n

Location: Stoneleigh Park, WarwickshireSalary: £25,000 – £28,000 per annumHours: Monday – Friday, 37 hours per weekContract: PermanentAbout NFU Energy NFU Energy is the go-to energy consultant for agriculture and related industries, providing advice on all aspects of energy, from procuring energy contracts to sourcing and recommending energy solutions. We're looking for an experienced and successful Sales Consultant to join our energy contract sales team in SME sales. This is an exciting opportunity to help grow our business by securing new customers, selling additional services to existing customers, and cross selling to other departments. Your role will be to oversee the end-to-end sales process for matrix and bespoke electricity and gas contracts. You must have a proven track record in delivering excellent customer service, as well as achieving individual and team targets. Experience working in the energy industry and/or brokers would be a distinct advantage. It's important that you learn quickly and demonstrate a proactive approach.The Role - Sell energy contracts to new and existing customers in order to achieve both personal and team targets - Contribute to sales reports where required by the Contract Sales Manager - Tailor relevant products to different types of clients - Identify cross-selling opportunities for other areas of the business - Be fully responsible for the quality of sale up to the supply going live - Make suggestions and contribute to the improvement of the sales process to ensure consistency and quality are maintained - Ensure sufficient support and accurate information is provided to the contract admin teamWhat We're Looking For - A minimum of 5 GCSEs grade A–C or equivalent; strong literacy and numeracy skills - Business to business sales experience including tele sales - Exceptional organisational skills and experience - Excellent communication and interpersonal skills, with the ability to communicate effectively to a range of audiences - Proven record of establishing effective working relationships - Good judgement skills – be able to identify issues and opportunities and allocate time and resource accordingly - The ability to listen and respond appropriately to instruction - Intermediate IT skills including Excel and Word - Good commercial acumen - Ability to work both under your own initiative and as part of a teamWhy Join Us Situated at the National Agriculture Exhibition Centre in Stoneleigh Park, Warwickshire, our recently refurbished office provides a perfect setting to work from. Our company values are employee focused; we believe in nurturing professionalism and resourcefulness in a united and inclusive work environment. We support work-life balance and operate a hybrid working policy with a mixture of home and office working available.Benefits - Salary of £25,000 – £28,000 depending on experience, plus commission - 33 days annual leave (including bank holidays) - Pension - Group life assurance (3 times salary) - NFU membership - Hybrid working policy - Access to mental health support - On-site facilities including gym, farm shop, nursery, free parking, walking and cycling opportunitiesTo Apply Please submit a CV and cover letter explaining your motivation for undertaking this role as well as any specific experience or strengths that you will bring, ensuring it is in line with the role description. Previous applicants need not apply. You may have experience in the following: Energy Sales Consultant, Contract Sales Executive, Energy Broker Sales, B2B Sales Consultant, SME Sales Representative, Gas and Electricity Sales, Energy Account Manager, Utility Sales Consultant, Agricultural Sales Consultant, Energy Contract Broker, etc.REF-229551

From Pipelines to Possibilities – Make Your Mark with Cadent \n We are looking for organised, customer-focused, and detail-driven individuals to join Cadent as a People Services Administrator within the HR team. \n As a People Services Administrator, you will provide key administrative support across a wide range of HR activities, acting as a first point of contact for employee queries and ensuring a high-quality, efficient service. You will play an important role in maintaining accurate HR records, supporting HR processes, and delivering excellent customer service to both internal and external stakeholders. \n This is a fantastic opportunity to gain experience within HR while contributing to the smooth running of a vital support function in one of the UK’s leading energy networks. \n How Cadent Powers Britain \n Cadent is shaping the future of UK energy. With a clear roadmap to support the UK government’s net zero targets by 2050, Cadent is driving innovation and creating a cleaner, greener future for over 11 million customers. Join Cadent and be part of something big. \n How You’ll Make an Impact \n In this role, you’ll support the delivery of HR services by providing high-quality administrative and customer support. Your responsibilities will include: \n\n • Acting as the first point of contact for HR queries via phone, email, and other channels\n, • Providing advice and guidance or signposting queries to the appropriate teams\n, • Supporting HR processes including onboarding, absence management, and employee records\n, • Maintaining accurate HR systems, databases, and employee files\n, • Preparing and issuing documentation such as contracts, letters, and forms\n, • Supporting probation reviews, exit processes, and general HR administration\n, • Managing shared inboxes and ensuring responses meet SLAs\n, • Building strong relationships with stakeholders across the business\n, • Ensuring all tasks are completed in line with Cadent policies and procedures\n, • Contributing to continuous improvement and service excellence\n\n How We’ll Know You’re the Right Fit \n We’re looking for someone who is organised, proactive, and customer-focused. You’ll ideally demonstrate: \n\n • Working towards CIPD L3 or equivalent\n, • Experience in an administrative or customer service role\n, • Strong organisational skills and ability to prioritise workload\n, • Excellent communication skills (written and verbal)\n, • High attention to detail and accuracy\n, • Confidence working with data and systems\n, • Good knowledge of Microsoft Office\n, • A collaborative approach and ability to build strong working relationships\n, • An interest in HR (CIPD or similar is desirable but not essential)\n, • A proactive mindset and willingness to learn\n\n How It All Comes Together \n\n • Pay rate: £13.53 per hour (PAYE, paid weekly)\n, • Assignment duration: 12 months\n, • Start date: ASAP\n, • Location: Pilot Way, Ansty Park, Coventry, West Midlands, CV7 9JU\n, • Working pattern: Hybrid 2 days in the office, 3 days WFH, Monday to Friday, 37 hours per week (between 8am – 5pm)\n\n \n How This Role Benefits You \n Don’t meet every single requirement listed? Cadent would still love to hear from you. \n Cadent Gas values understanding, learning, and celebrating differences. They are an equitable and diverse employer, fostering an inclusive and accessible working environment for all. \n\n • Recognised Disability Confident employer\n, • Inclusive employee communities\n, • Full training and on-the-job support\n, • Opportunity to gain HR experience within a leading UK organisation\n, • Free onsite parking\n, • Modern office facilities\n\n How to Take the Next Step \n If you’re interested, please apply today with your updated CV. \n A member of the Reed team will be in touch to guide you through the next steps, including a telephone interview, client interview, and pre-employment checks. \n \n Be part of something big. Help keep Britain connected.

Finance Analyst Salary: £54,000 - £59,000 Location: Coventry Contract: Full Time, Permanent The Opportunity We're partnering with a large, well-established organisation to recruit a talented Finance Analyst who can provide meaningful financial insight and support key business decisions across a major investment and delivery programme. This is an excellent opportunity for a commercially minded finance professional who enjoys working with complex data, influencing stakeholders, and turning financial information into actionable recommendations. You'll play a key role in supporting performance, improving reporting processes, and ensuring robust financial control across a significant portfolio of projects. Working within a collaborative finance team, you'll have regular exposure to senior stakeholders and will contribute to both operational and strategic decision-making. Key Responsibilities Produce meaningful financial and operational analysis to support business performance. Deliver regular reporting packs, highlighting key trends, risks and opportunities across the organisation. Support budgeting, forecasting and planning activities, ensuring stakeholders have clear financial visibility. Analyse business performance and provide recommendations to improve efficiency, profitability and decision-making. Partner with a range of internal stakeholders to understand business drivers and support commercial objectives. Develop and maintain reporting tools, dashboards and management information that enhance insight and transparency. Assist with financial modelling, scenario analysis and business case development to support strategic initiatives. Identify opportunities to streamline reporting processes and improve the quality of management information. Investigate variances and emerging trends, providing clear commentary and actionable recommendations. Support continuous improvement projects across finance, reporting and business performance activities. Contribute to month-end and year-end financial processes as required. Provide ad hoc analysis and insight to support senior leadership and wider business teams. Skills & Requirements Experience working in a Finance Analyst, Performance Analyst, Commercial Finance or similar analytical role. A professional accounting qualification (ACA, ACCA, CIMA or equivalent). Strong financial modelling, forecasting and reporting capabilities. The ability to interpret large and complex data sets and communicate findings clearly. Excellent stakeholder management and business partnering skills. Advanced Excel skills and experience using financial or business intelligence systems. A proactive approach with the confidence to challenge constructively and influence decision-making. Strong organisational skills with the ability to manage multiple priorities. Experience identifying and implementing reporting or process improvements. Benefits & Package Competitive salary and bonus potential Generous pension contribution Hybrid and flexible working arrangements Excellent learning and development opportunities Enhanced holiday entitlement Health and well being benefits Long-term career progression within a large and successful organisation To apply for the Finance Analyst position, please click on the apply now button and your CV will be sent directly to the responsible recruiter. We will respond to successful applicants within 7 days, however please feel free to get in touch if you would like any further information about your application. At Gleeson Recruitment Group, we embrace inclusivity and welcome applicants of all backgrounds, experiences, and abilities. We are proud to be a disability confident employer. By applying you will be registered as a candidate with Gleeson Recruitment Limited. Our Privacy Policy is available on our website and explains how we will use your data

As Finance Director, you will have full responsibility for the financial leadership of the Group, ensuring best-in-class financial control, governance, reporting, compliance and taxation. Just as importantly, you will act as a strategic business partner, providing insight, challenge and commercial guidance that supports growth and performance across the organisation. \n Client Details \n This is an opportunity to join one of the UK's most successful employee-owned businesses at a pivotal stage of its journey. As a key member of the senior leadership team, you will work directly with the CEO and COO to influence strategy, shape decision-making and drive the continued growth of a highly respected, entrepreneurial organisation. \n \n Employee ownership sits at the heart of the business. It is more than a benefit; it is a reflection of a culture built on accountability, collaboration and long-term thinking. People are genuinely invested in the success of the business, creating an environment where leaders can make a lasting impact. \n Description \n As Finance Director, you will have full responsibility for the financial leadership of the Group, ensuring best-in-class financial control, governance, reporting, compliance and taxation. Just as importantly, you will act as a strategic business partner, providing insight, challenge and commercial guidance that supports growth and performance across the organisation. \n Leading an established finance function, you will drive continuous improvement, strengthen capability and ensure the business is well positioned for future opportunities. \n \n Key Priorities \n\n • Provide strategic financial leadership to the Board and senior leadership team.\n, • Lead all group reporting, controls, compliance, tax and audit activities.\n, • Deliver high-quality commercial insight to support decision-making and growth.\n, • Drive budgeting, forecasting, investment appraisal and long-term planning.\n, • Develop and inspire a high-performing finance team.\n, • Strengthen governance, risk management and operational excellence across the function.\n\n \n Profile \n About You \n\n • ACA qualified.\n, • Outstanding technical accounting, reporting and audit expertise.\n, • Understanding of corporate tax and regulatory compliance.\n, • Commercially astute, with the ability to influence and challenge at Board level.\n, • Experience leading and developing high-performing teams.\n, • Comfortable operating in a fast-paced, entrepreneurial environment.\n\n \n Job Offer \n Few opportunities offer this level of influence, visibility and long-term impact. \n You'll join a successful, values-led business where ownership mentality drives performance and where the Finance Director is a genuine strategic partner to the leadership team. For an ambitious finance leader looking to leave a lasting mark on a thriving organisation, this represents a rare and career-defining opportunity.

Buyer (Supply Chain / Procurement) Location: Coventry (Hybrid working 2 days per week) Salary: circa £36,000 Hours: 37.5 per week Contract: Permanent \n We are recruiting for an experienced Buyer to join a growing manufacturing and engineering business at their new Coventry site. This is a hands-on role combining purchasing, scheduling and supply chain coordination, with real ownership of materials planning and supplier performance. \n You will be responsible for the procurement of materials, components and equipment, ensuring stock availability aligns with production and customer demand. Working closely with engineering, production, operations and logistics, you will play a key part in keeping the supply chain moving and improving supplier performance. \n Key responsibilities include: \n • Planning, scheduling and monitoring goods and services to meet production requirements, using techniques such as JIT, Kanban, blanket POs and rescheduling • Ensuring raw materials, components and production supplies are ordered accurately and delivered on time • Managing inventory and safety stock levels to balance customer service with effective use of capital • Maintaining material, supplier and planning data within the MRP/ERP system • Investigating shortages and carrying out root cause analysis with corrective actions • Supporting installation and inventory plans by providing clear guidance on material availability • Managing supplier performance, delivery metrics and quality issues • Analysing data in Excel (including pivots and lookups) to identify improvement opportunities • Supporting logistics, shipping and import processes • Working with design teams on drawings, product descriptions and codes to ensure accurate procurement • Leading supplier negotiations and driving cost saving and cost avoidance initiatives • Managing commercial risks and maintaining accurate reporting to support decision making • Building strong relationships across engineering, production, sales, operations and external suppliers \n About you: \n • Proven experience in buying, supply chain or materials planning • Experience using MRP / ERP systems • Strong Excel skills including pivot tables, vlookups and basic formulas • Confident communicator with a practical, solution-focused mindset • Strong commercial awareness and negotiation ability • Able to manage priorities in a fast-paced environment • Comfortable working cross-functionally and influencing stakeholders \n Desirable (but not essential): \n • International purchasing experience, including Far East sourcing • Logistics or import experience (or willingness to learn) \n This is a site-based role in Coventry, with occasional travel to suppliers and other UK locations as required. If you’re a Buyer who enjoys ownership, variety and making a tangible impact on supply chain performance, this is a great opportunity. \n INDL

Production Operative - relocation to Oldford Location: Oldford, Frome Salary: Starting from £31,944 per annum with the opportunity to progress to up to £38,000 per year Job Type: Permanent, Full Time Benefits 6% employer pension contribution 25 days' annual leave plus Bank Holidays Excellent overtime opportunities Subsidised staff canteen Free on-site parking Staff discount shop Employee Assistance Programme (EAP) Eye care support and health screening Life Assurance (4x annual salary) Previous manufacturing experience is helpful but not essential - full training provided. Workforce Recruitment Group is recruiting Production Operators on behalf of a leading, expanding food manufacturing business based in Oldford, Frome. This is an excellent opportunity to join a well-established manufacturer that continues to invest in its people, facilities and future. If you're reliable, motivated and enjoy working in a fast-paced production environment, we'd love to hear from you. Why Join? Excellent overtime available: 1.5x pay Monday to Saturday Double time on Sundays 35-minute paid break Stable, long-term employment Full training provided Supportive and diverse team environment Full PPE provided The Role Following full training, you will be responsible for operating and monitoring production and packing line machinery while ensuring production targets, food safety and quality standards are consistently achieved. Your responsibilities will include: Operating production machinery safely and efficiently Supplying packaging materials to production lines Carrying out quality assurance checks during production Palletising finished products Moving finished goods safely into cold storage Reducing waste and supporting continuous improvement Maintaining high housekeeping standards Following all Health & Safety and Food Hygiene procedures This is a hands-on, physically active role within a busy food manufacturing environment. Shift Pattern - Please Read Before Applying This role operates on a weekly rotating three-shift pattern. You must be able to work all three shifts, as they rotate on a regular basis: Early Shift: 6:00am - 2:00pm Afternoon Shift: 2:00pm - 10:00pm Night Shift: 10:00pm - 6:00am This is not a fixed-shift position. Successful applicants will be required to rotate between all three shifts, including nights. A 35-minute paid break is included in every shift. What We're Looking For We're looking for candidates who: Have a positive attitude and a strong work ethic Are reliable and committed to long-term employment Work well as part of a team Are comfortable working in a fast-paced manufacturing environment Are physically fit and happy carrying out manual handling duties Can commit to working a rotating shift pattern, including nights Take pride in producing high-quality work safely and efficiently Relocation support available This role is based in Oldford. However, using our bespoke "Recruit and Relocate" solution, Workforce can support candidates willing to relocate by assisting with accommodation sourcing and helping you settle into the area smoothly. If you are looking for a stable, long-term opportunity with excellent benefits and career development, we would love to hear from you. Apply today

Exciting contract opportunity available working for a Launch Quality Engineer wanted for tier 1 automotive supplier based in Coventry Working as a key member of the Quality function, the Launch Quality Engineer will be responsible for ensuring total customer satisfaction by dealing with both internal and external customer concerns promptly, identifying root cause and instigating permanent corrective actions for both day-to-day and new model launch activities. The daily duties of the Quality Engineer will include but are not limited to: MAIN RESPONSIBILITIES: KEY SKILLS AND QUALIFICATIONS: Liaising with the customer, suppliers, manufacturing and the program team on build/ quality issues. Ensure product meets as a minimum the quality targets at each project gateway, through VB to job 1 measured through MGR. Demonstrate the quality of the seats using data e.g. audit results, capability data on all measurable elements of seat construction including component capability. Problem resolution (Internal and External). New product introduction supports Glide Path timings Support for quality deliverables for new model launch Global 8D and PPS report writing. FMEA and control plan support. Facilitating CQSM introduction, internal & customer sign off. Consistently identify opportunities for improvement within the department and record all improvements. Providing feedback to the Senior Quality Engineer Supporting pre-production builds, managing LOP list. Key Skills: Experience in JIT and/or Lean Manufacturing environment New model launch Seating / Soft trim experience Lean/Six Sigma background Minitab Experience Skills required Automotive experience. Ideally Seating or interior trim experience MS Office – Word, Excel TS16949 System knowledge Root cause analysis 8D and PPS report writing. PPAP experience A minimum of a HND or equivalent qualification or experience. If you want to know more about this exciting opportunity please review and APPLY NOW

Asbestos Surveyor Location: Coventry Salary: £34,000–£38,000 Benefits: Company vehicle or car allowance, fuel card, funded training and career progression The Company Our client is a well-established asbestos consultancy delivering surveying, analytical and compliance services across domestic, commercial, industrial and public-sector environments. Due to continued growth, they are looking to recruit an experienced Asbestos Surveyor to cover Coventry and the surrounding areas. This is an excellent opportunity for an Asbestos Surveyor to join a professional and people-focused business that invests heavily in training, technical development and long-term career progression. The Role As an Asbestos Surveyor, you will carry out a range of asbestos surveys across a varied portfolio of properties and sites. You will be responsible for gathering accurate information, taking samples and producing clear, detailed survey reports in line with current legislation and industry standards. The Asbestos Surveyor will work independently while building positive relationships with clients, site teams and other stakeholders. Responsibilities Carry out Management asbestos surveys. Complete Refurbishment and Demolition surveys. Collect asbestos samples safely and accurately. Record detailed site information and survey findings. Produce clear and accurate survey reports. Work across domestic, commercial and industrial properties. Ensure all work complies with HSG264 guidance. Follow company procedures and quality standards. Maintain strong relationships with clients and site contacts. Support trainee surveyors when required. Contribute to continuous improvement and technical quality. Requirements The successful Asbestos Surveyor will ideally have: BOHS P402 qualification or equivalent. Previous experience carrying out asbestos surveys. Knowledge of HSG264 and relevant asbestos legislation. Strong report-writing and documentation skills. Excellent attention to detail. Professional and client-focused approach. Ability to manage your own workload. Full UK driving licence. Package Salary of £34,000–£38,000. Company vehicle or car allowance, with fuel card provided. 20 days’ annual leave plus bank holidays. Opportunity to earn up to five additional loyalty days. Life assurance following six months’ service. Company pension through salary exchange. Employee Assistance Programme. Fully funded professional training and qualifications. Progression into Lead Surveyor, Team Leader, Auditing, Project Lead or Project Management roles. * Smartphone, tablet, tools and PPE provided. This is a strong opportunity for an experienced Asbestos Surveyor looking to join a growing consultancy that offers stability, investment and genuine career progression

Location: Coventry Hourly Rate: £27.12 per hour Duration: 6 moths with extension or offer of a permanent contract. An established aerospace manufacturing business is seeking a Quality Engineer to support product quality, compliance, continuous improvement and customer satisfaction across a high-performance production environment. This is a hands-on manufacturing quality role focused on AS9100 compliance, root cause analysis, APQP and defect reduction within a regulated aerospace environment. Key Responsibilities: • Support manufacturing and production quality activities across the value stream • Conduct audits to AS9100, ISO9001 and aerospace quality standards • Lead root cause analysis using 8D, 5 Why and corrective action methodologies • Drive continuous improvement, Lean and Six Sigma initiatives • Support APQP, PFMEA, DFMEA, PPAP and Control Plans • Review First Article Inspection documentation to AS9102 • Monitor supplier quality and manufacturing quality performance metrics • Work closely with engineering, operations and customers to resolve quality issues Requirements: • Experience as a Quality Engineer, Manufacturing Quality Engineer or Supplier Quality Engineer • Aerospace, aviation or regulated manufacturing background • Strong knowledge of AS9100, AS9102 and ISO9001 • Experience with APQP, PFMEA, 8D and Root Cause Analysis • SAP or MRP system experience preferred • Excellent communication and stakeholder management skills This is an excellent opportunity for a quality professional looking to join a growing aerospace manufacturing environment with strong long-term progression opportunities

Join our growing team at Anglian Home Improvements, a leading provider of high-quality installation services for windows, doors, conservatories, and roof trims. We pride ourselves on delivering exceptional craftsmanship and excellent customer service. We are looking for skilled installers to help us continue our tradition of excellence. The Role Due to continued growth and demand, we are seeking experienced self-employed Conservatory Installers to join our friendly team. In this role, you will be responsible for the precise installation of conservatories in and around the local area. You will work closely with clients to ensure that all installations meet our high standards of quality and safety. Key Responsibilities Install and fit conservatories with precision and care. Install and secure products using the appropriate tools and techniques. Accurately measure and cut materials for optimal fitting. Apply insulation, weatherstripping, and caulking to prevent air and water leaks. Complete interior and exterior finishing work, including trim and moulding. Ensure proper functioning of windows, doors, locks, and hardware. Maintain a clean and safe work environment. What We`re Looking For Proven experience as a Conservatory Installer or similar role. Strong knowledge of carpentry and joinery techniques. Familiarity with building codes and safety regulations. Proficiency in using hand and power tools. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Valid driver’s license and reliable transportation. Why Join Us Uncapped earning potential, weekly payments Monthly incentives & prizes Immediate start Continuous volumes of work Opportunity to develop in the industry Van available for work purposes We install home improvement excellence - We set the standard. We are passionate about delivering a high-quality installation service to every single customer. To make sure our installations teams are the best in the industry we provide a structured on-boarding induction to all new installers. Kick start your career in the industry with the best and join our Anglian family! Our Company is committed to monitoring & aligning its Policies with up-to-date Government guidance on reducing the spread of respiratory infections in the workplace. Through the Company’s value of “Succeed Together” we are committed to Equality, Diversity and Inclusion. We recruit the ‘best person for the job’ regardless of any protected characteristics as defined by the Equality Act 2010 creating an inclusive working environment and culture for our employees

The Job People are looking for a Production Supervisor to join a busy manufacturing site in Coventry for long term work. We require candidates with production supervisor experience with a keen eye for detail and willingness to learn new skills. Must be able to read & understand English. Must be able to sue a tape measure accurately. We are looking for hardworking, enthusiastic colleagues who are willing to work long term with the opportunity to gain a full-time contract. Self-Motivated, Friendly. Able to effectively communicate with managers and colleagues. Have a 'can-do' attitude and willing to learn new skills. This is a full time role - with the view to go permanent after a qualifying period. Shift Hours as a Production Supervisor in Coventry: Monday to Friday 8 hours per day 16.00 - 00.00 Some shifts may start earlier or finish later due to the demands of the business. Weekend support required in busy periods Long term work Opportunity to go permanent after a qualifying period.Pay Rates for Production Supervisor: £16.92 per hour - flat rate with shift allowance added - £22.50 per hour Must be prepared to train for a short period on AM shift - Monday to Friday 7am-3pm Overtime paid after 37.5 hours Pay increases reviewed Duties as a Production Supervisor in Coventry: Lead fabrication operators, which includes dealing with ER issues Ensure the safety of yourself and the team, all are working to agreed safety and quality standards Oversee production operations ensuring people and materials are in the right place at the right time Ensure quality checks take place when needed, actions arising from these are dealt with Working within the team troubleshoot issues with machinery / products Drive continuous improvement on the workshop floor Ensure production targets are met and highlight/action when falling behind Manage consumable stocks, ensure items are ordered when reorder point is reached Oversee the warehouse operation, balance labour resource where needed Leadership & Communication, ability to manage teams, handle conflict, and communicate technical information clearly. Technical knowledge, understanding of manufacturing machinery and processes. Analytical thinking, troubleshooting production issues and analyzing performance data. Willingness to learn/use a computer Willingness to work as part of a team Should not suffer from claustrophobia or fear of heights Should be able to lift 20kg consistently during the working day Accurately use various tools and be able to use a measuring tape and spirit level. Musty be able to count and work out measurements in MM, CM and Inches. Full training provided. Moving pallets and stock to various locations Support with loading and unloading deliveries. General duties as and when required.Benefits of working for The Job People: Long term work - Opportunity to gain a full-time contract. Weekly Pay Holiday Pay Canteen on site - free hot drinks Access to online payslip portal Pension Scheme Free on-site car parking PPE Work wear provided. Dedicated account team Training programme Full time hours available Fixed Shifts Consistent shifts Great work / life balancePlease click apply to be considered for our role within the manufacturing and production industry in CV2. Please note - due to increased applications we receive, we cannot always respond to every applicant. The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

Join our team at PepsiCo Coventry! We're looking for skilled electrical engineers who can keep our manufacturing equipment running smoothly. Your work will help ensure our production lines operate at their best every day, helping us produce some of the UK's favourite snacks - like Doritos and Wotsits. Working Hours Continental shift pattern: 4 days on, 4 days off. 42 hours/week on average, including weekends, bank holidays, and night shifts. 12-hour shifts: This will rotate between days (06:30-18:30) and nights (18:30-6:30). Includes weekends, bank holidays, and night shifts. Salary: £57,924.07 * For certain roles, we may ask you to declare any unspent criminal convictions in accordance with the Rehabilitation of Offenders Act 1974 at a later stage in the recruitment process and prior to any offer of employment being made. This information will be treated in strict confidence and considered only in relation to your suitability for the role. Carry out maintenance activities in your area of responsibility, maximizing wrench time while following safety protocols. Support continuous improvement using the PDCA (Plan-Do-Check-Act) cycle. Provide feedback to planners and leadership to help optimize schedules, frequency, and parts planning. Conduct pre- and post-maintenance quality checks. Manage lubrication mapping and execution, and support the simplification and rationalisation of our lubricants. Train the autonomous maintenance team on equipment knowledge, basic Clean-Inspect-Lubricate routine and fault diagnostics. Lead the root cause analysis sessions and offer technical expertise. Promote and maintain strong 5S standards across the plant. Formal NVQ Level 3 or equivalent engineering apprenticeship with hands-on experience. Recognized electrical academic qualification. Strong electrical knowledge. Familiarity with CMMS and SCADA systems. Solid understanding of equipment and technical standards. A sense of ownership for safety, quality, and performance. Problem-solving skills. Good communication.Salary & Benefits Quarterly performance bonuses: £325 to £750. Visa sponsorship. Relocation package. Generous pension scheme: We double your contribution! You put in 5%, we add 10%. Extended fully paid family leave: 10 weeks of parental leave and 26 weeks of extended leave. Provided PPE: Uniforms and safety shoes provided, cleaned, and maintained on-site. Further benefits: A 24-hour online GP for you and your family, Free virtual physiotherapy, A discounted gym membership, Long service rewards, Critical illness cover, Electric car scheme, Staff shop with great discounts on PepsiCo products, Day off on your birthday, Option to buy/sell holiday leave. Apply now - we're waiting to hear from you

Overview We are seeking a hands-on Quality Assurance Manager to lead the quality strategy across a portfolio of embedded software, firmware, and hardware products. This is a senior role for an experienced QA leader who can combine technical depth with people leadership, taking ownership of the full testing lifecycle across complex engineering products. You will be responsible for defining and driving the overall quality approach, from test frameworks and automation architecture through to Hardware-in-the-Loop (HIL) validation, reporting, release readiness, and continuous improvement. Working closely with R&D, product, and cross-functional engineering teams, you will help build a scalable and contribution-friendly test ecosystem that supports quality across the wider organisation. This role would suit someone with a strong background in embedded systems testing, automation, CI/CD, and system-level validation, who is comfortable leading a team while remaining close to the technical detail. Key Responsibilities Test Strategy & Framework Development Define and own the QA and test strategy across the full product lifecycle for software, firmware, and hardware-based products. Establish test frameworks, standards, and best practices to ensure consistent, scalable, and high-quality validation processes. Design modular and reusable test architecture, ensuring test assets are version-controlled, maintainable, and accessible to contributors outside the QA team. Create a contribution model including templates, governance, code review standards, and documentation to enable broader engineering participation in quality. Drive coverage across the test pyramid, including unit, integration, system, acceptance, and end-to-end testing. Automation & CI/CD Build and improve automated testing capability across embedded and system-level products. Integrate automated test execution into CI/CD pipelines using tools such as Jenkins, GitLab CI, or GitHub Actions. Implement quality gates, reporting, flaky test management, and automated feedback loops to support release confidence and development speed. Promote shift-left testing practices to improve defect prevention and increase early-stage quality ownership across engineering teams. Hardware-in-the-Loop (HIL) & Embedded Validation Plan, develop, and operate HIL test environments where the company's own hardware and embedded software are the components under test. Coordinate signal injection, fault injection, and real-time stimulus to validate behaviour under both nominal and edge-case operating conditions. Define HIL infrastructure requirements and work closely with hardware engineers on bench design, setup, calibration, and ongoing maintenance. Oversee system-level validation activities to ensure robust end-to-end product performance across hardware, firmware, and application layers. Reporting, Metrics & Release Readiness Produce clear and audience-appropriate test reporting covering execution progress, pass/fail rates, defect trends, coverage, and regression performance. Define and track quality KPIs such as test coverage, automation ratio, defect leakage, escape rate, MTTD/MTTR, and release readiness. Maintain requirements-to-test traceability to support verification, audit readiness, and confidence in delivered functionality. Provide release sign-off recommendations based on evidence, quality data, and clear risk assessment. Leadership & Team Development Lead, mentor, and develop a team of QA engineers across local and global teams. Set team objectives, conduct 1:1s, performance reviews, and support professional development and capability growth. Foster a quality-first engineering culture by supporting teams on testability, defect prevention, and continuous improvement. Run core QA ceremonies including sprint planning, defect triage, retrospectives, and alignment with wider delivery and release activities. Cross-Functional Collaboration Work closely with R&D, Product, and Customer Support teams to translate customer requirements, field issues, and product needs into robust test plans. Represent QA in architecture and design reviews to ensure quality and testability are considered from the earliest stages of development. Champion defect lifecycle management, including triage, prioritisation, root cause analysis, and post-mortem reviews. Collaborate with stakeholders across the organisation to improve quality visibility, governance, and release confidence. Required Skills & Experience Bachelor's or Master's degree in Computer Science, Electrical/Electronic Engineering, or a related technical discipline. Proven experience in QA, test engineering, or validation within embedded software and/or hardware product environments. Previous leadership experience managing and developing QA or test engineering teams. Strong hands-on experience with test automation, test framework design, and scalable validation strategies. Good understanding of the full test lifecycle, including unit testing, integration testing, system testing, BDD/acceptance testing, and end-to-end validation. Experience with Hardware-in-the-Loop (HIL) or equivalent embedded validation environments. Strong programming/scripting skills in at least one of Python, C, C++, or Java. Familiarity with CI/CD pipelines, version control systems such as Git, and automated quality reporting. Experience using defect tracking and test management tools such as Jira, Xray, Zephyr, or Polarion. Strong written and verbal communication skills, with the ability to work effectively with both technical teams and senior stakeholders. Demonstrated ability to improve QA maturity, drive process improvements, and build a collaborative quality culture. To find out more about Computer Futures please visit Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC(phone number removed) England and Wales

Hygiene Manager Location: Coventry Salary: £50,000 per annum Working Pattern: Tuesday - Saturday Job Type: Full Time, Permanent Hygiene Manager - Coventry Are you an experienced Hygiene Manager looking for your next challenge? Do you have a passion for maintaining the highest standards of hygiene, food safety, and compliance within a fast-paced manufacturing environment? We are seeking a driven and proactive Hygiene Manager to lead and develop the hygiene function at our Coventry site. This is an excellent opportunity to join a successful business where quality, safety, and continuous improvement are at the heart of everything we do. The Role As Hygiene Manager, you will be responsible for overseeing all hygiene operations across the site, ensuring the highest standards of cleanliness, food safety, and regulatory compliance are achieved and maintained. Working Tuesday to Saturday, you will lead the hygiene team, drive performance, and work closely with Production, Technical, and Quality departments to support operational excellence. Key Responsibilities Manage and lead the site hygiene team, providing direction, training, and development. Ensure all cleaning schedules and hygiene standards are completed effectively and efficiently. Maintain compliance with food safety, health & safety, BRC, and company standards. Conduct hygiene audits, inspections, and verification activities. Investigate non-conformances and implement corrective actions. Develop and continuously improve hygiene procedures and practices. Manage hygiene budgets, resources, and consumables. Liaise with internal and external auditors. Monitor KPI performance and drive continuous improvement initiatives. Ensure all team members are trained and competent in hygiene procedures and best practice. About You To be successful in this role, you will have: Previous experience as a Hygiene Manager or Senior Hygiene Supervisor. Experience within a food manufacturing or FMCG environment. Strong understanding of food safety and hygiene regulations. Knowledge of BRC standards and audit requirements. Excellent leadership and people management skills. Strong organisational and problem-solving abilities. A proactive approach and commitment to continuous improvement. HACCP knowledge and food safety qualifications are highly desirable.If you're a motivated Hygiene Manager looking to make a real impact within a growing business, we'd love to hear from you. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people

ROLE: Children's Contact Centre Deputy ManagerLOCATION: Coventry, CV4RESPONSIBLE TO: Contact Centre ManagerSalary: £29,000 per yearWorking hours: 39.5 hours per weekWorking days: Tuesday-Saturday (including bank holidays)This is initially a temporary position for 6 months, with the potential to become permanent subject to business needs and performance.Main Objectives:The Deputy Manager supports the Centre Manager in the day-to-day management of the Family Time and Family Support services offered by the organisation, ensuring the safe, child-focused delivery of services. A key part of the role is the coordination and set-up of referrals, including meeting with parents, social workers and any other professionals involved to establish clear expectations, assess risk, and agree service arrangements.The Deputy Manager also plays a central role in reviewing cases where concerns arise, holding review meetings with parents and professionals as required, and ensuring appropriate safeguarding actions are taken. The role combines operational oversight, safeguarding support, staff supervision, and quality assurance, and provides cover for the Centre Manager when required.Key Responsibilities:GeneralProactively take ownership in developing own knowledge to understand the context of the work of the company and associated risks, challenges and prioritiesMaintain at all times strict confidentiality of information relating to any sensitive informationCommunicate information effectively using the correct channels;Ensure familiarisation and adherence with Swan Familys policies and procedures at all timesMeet obligations in respect of Health and Safety, primarily not putting self and others at risk of harmCarry out responsibilities effectively, accurately, promptly and in a well-organised wayObserve and work to the Swan Familys Core ValuesDispose of confidential paperwork appropriately using secure methodsTo uphold Swan Family's core values, including treat all with respect. Swan Family operate as an anti-bullying organisation. Any abuse of this policy will be dealt with by disciplinary action, up to and including dismissal.Principal DutiesTo assist the manager in the general running of the centre and to undertake his/her responsibilities as may be designated in their absence, including attending the Centre Managers meeting at Head OfficeTo manage the daily workload of the Supervised Contact Workers, matching workers to contacts and ensure all work is covered.To maintain and develop relationships with Local Authorities, social workers, solicitors and other professionals and service users whilst ensuring contact demands are met.To ensure the centre is a safe environment to work in and visit.Ensuring timely flow of information between Swan Family, its clients and workers.To conduct Safeguarding (Warner) interviews with candidates where required.To check the content of reports submitted by Supervised Contact Worker, addressing any issues identified by these reports to the relevant channels. Liaising with service staff to improve the quality of reports where required.To coordinate planning and review meetings and booking with our clients and service users, ensuring information is shared to the appropriate people, and take payments if required.To work with Swan Family departments to share information for the business needs and service delivery including data monitoring and service performance reviews.To write and deliver safeguarding training sessions for service staff as required, upon request of Family Support Services Manager.To follow Swan Family and NACCC policies and procedures for the service; including but not limited to safeguarding and child protection, confidentiality and Health and Safety.To resolve daily operational problems and queries efficiently and effectively.To promote a professional service at all times.To provide feedback and reporting to the Contact Centre Manager on a regular basis.To be prepared to work flexibly and outside office hours as appropriate, including supervising contacts if required.To ensure the centre standards are maintained and the centre is always clean and tidy.To ensure that the centre is a welcoming environment and that high customer service standards are upheld by all staff.Performance MeasurementThe jobholders commitment to, and success in, their Personal Development Plan. Improvement in the quality and content of service provided.Ability to cope with periods of high workload and prioritise tasksContribution to the overall team effortAchievement of goals indicated in monthly performance reviewsAchievement of all areas of minimum performance standardsStrict ConfidentialityDue to the nature of the information the job holder will be exposed to, it is essential that they maintain the highest level of confidentiality at all times. Failure to do so may result in disciplinary action, up to and including dismissal.SupervisionThe jobholder works within the guidelines laid down by the Manager, being adaptable to the changes in the priorities dictated by the superior.Decision MakingThe jobholder is responsible for prioritising his/her daily workload whilst accounting for the priorities of the Manager.Job Types: Full-time, PermanentBenefits:- Company pensionWork Location: In personTPBN1_UKTJ

Senior Technical Manager Coventry £90k - £110k + Package We are currently recruiting for a Senior Technical Manager to manage a team across multiple projects, this is a technical lead role that is solely responsible for the technical function. The Company Our client is a leading Main Contractor with a strong reputation for delivering high-quality residential-led developments across the Midlands and wider UK. Their portfolio includes large-scale mixed-use schemes, high-rise residential developments, regeneration projects, Build-to-Rent, PBSA and affordable housing developments. Due to continued growth, they are seeking an experienced Senior Technical Manager to lead and manage the regional technical team from their Coventry office. The Role As Senior Technical Manager, you will be responsible for leading the technical function across multiple residential projects throughout the region. You will manage and mentor Technical Managers and Coordinators, oversee consultant teams, and ensure all projects are delivered in line with programme, budget, quality standards and statutory requirements. This is a leadership role requiring a balance of technical expertise, people management and strategic oversight. Key Responsibilities Leadership & Team Management Lead, mentor and develop the regional technical team. Manage workloads, resource planning and project allocation. Drive high performance and continuous improvement across the department. Support recruitment, training and career development initiatives. Promote best practice design management and technical delivery processes. Technical & Design Management Oversee the technical delivery of multiple residential-led developments. Manage external consultant teams including architects, structural engineers, MEP consultants and specialist subcontractors. Chair and lead design team meetings. Ensure design information is coordinated, compliant and issued in accordance with programme requirements. Identify and mitigate technical risks throughout the project lifecycle. Project Delivery Work closely with Construction, Commercial, Planning and Pre-Construction teams. Drive technical programmes to ensure key milestones are achieved. Monitor design progress and approvals to support successful project delivery. Provide technical support during procurement and construction phases. Resolve complex design and construction issues. Compliance & Building Safety Ensure compliance with Building Regulations, Building Safety Act requirements, NHBC standards and relevant legislation. Oversee Gateway submissions and statutory approvals where applicable. Maintain robust technical governance and quality assurance procedures. Support project teams in achieving regulatory and warranty approvals. Stakeholder Management Act as the senior technical representative for the region. Build strong relationships with clients, consultants, local authorities, warranty providers and key project stakeholders. Provide regular project updates and technical reporting to senior management. Requirements Proven experience in a Senior Technical Manager, Technical Lead or Head of Technical role. Strong residential construction background gained with a Main Contractor, Developer or Housebuilder. Experience managing technical teams and delivering multiple projects concurrently. Excellent understanding of Building Regulations, NHBC standards and Building Safety Act requirements. Ability to lead consultant teams and manage complex design coordination processes. Strong commercial awareness and risk management skills. Excellent leadership, communication and stakeholder management abilities

About the Role Coventry City Council is seeking an experienced Qualified Social Worker to join the West Team within Children's Services. This is an excellent opportunity to join a supportive and established case-holding team, working directly with children and families to deliver effective safeguarding interventions and positive outcomes. Rate: £28.55 per hour (Umbrella) As a Social Worker within the West Team, you will manage a varied caseload and work with children and families requiring statutory support and intervention. Key responsibilities Completing Child and Family Assessments Undertaking Child Protection Enquiries Working with Children in Need, Child Protection and Looked After Children Supporting families through the Public Law Outline (PLO) process Initiating care proceedings where required Developing effective support and intervention plans Delivering direct work with children and families Assessing and managing risk to ensure children's safety and wellbeing Working collaboratively with partner agencies to achieve positive outcomes Preparing court reports and providing instructions to Legal Services when necessaryRequirements Social Work England registration A recognised Social Work qualification Experience of Child Protection, Children in Need and Looked After Children work Experience completing Child and Family Assessments Knowledge of the Public Law Outline (PLO) process and court work Strong safeguarding and risk assessment skills The ability to work autonomously while contributing positively to team practice Excellent communication, assessment and report-writing skillsExperience A thorough understanding of relevant legislation, statutory guidance and social work practice standards Knowledge of safeguarding frameworks and legal processes relating to children's social care Experience of multi-agency working and partnership engagement The ability to manage complex cases and make sound professional judgments Commitment to continuous professional development and reflective practice Strong recording and case management skills, ensuring compliance with data protection and information governance requirements Maintain accurate and up-to-date case records Contribute to meetings, reports and reviews both verbally and in writing Participate in supervision, training and development opportunities Support service improvement and contribute positively to team objectivesWhy Join Coventry City Council? Coventry City Council is committed to delivering high-quality services for children and families and offers a supportive environment where social workers can thrive professionally. This role offers the opportunity to: Work within an experienced and supportive team Develop specialist safeguarding and court skills Benefit from regular supervision and professional development Make a genuine difference to the lives of children and families across CoventryIf you are an experienced Children's Social Worker looking for your next opportunity within a supportive local authority, we would love to hear from you

Join a Global Leader in Automotive Innovation Exciting Opportunity for a Mechanical Engineer – Roles in Powertrain Component Development & Project Coordination As part of our continued growth and success, FEV UK is pleased to offer multiple opportunities for experienced Mechanical Engineers to join our team on a full-time, permanent basis. FEV UK is the agile and fast-growing UK arm of FEV Group, one of the world's largest automotive engineering consultancies, delivering advanced engineering solutions across powertrain, transmission, vehicle and mobility development. These roles support FEV lead programmes located in the Midlands (Coventry) and Woking, working directly with leading automotive manufacturers and suppliers on the development of conventional powertrains, including internal combustion engines and automatic transmissions. Depending on experience and skill we’re looking for candidates that are looking for a technically focused role or a more programme delivery project management role The Role: We are seeking motivated engineers who can combine strong technical capability with effective project coordination. The projetcs covers the complete product development process from concept through validation and release to production, acting as a key interface between customers, suppliers, design teams and test facilities. What You'll Be Doing Lead component development activities for engine and/or automatic transmission programmes. Coordinate cross-functional project teams to deliver programme objectives, timing plans and technical milestones. Support component and system design reviews, ensuring robust engineering solutions and compliance with customer requirements. Manage suppliers throughout the development lifecycle, including technical reviews, issue resolution and delivery tracking. Define and coordinate validation and durability test programmes at component, subsystem and vehicle level. Analyse test results, identify failure modes, drive root-cause investigation and corrective actions. Prepare and present technical reports, status updates and engineering recommendations to customers and stakeholders. Manage engineering changes, risk assessments and product maturity reviews. Support prototype build activities and production readiness assessments. Coordinate component sign-off activities and release parts into production. Ensure compliance with quality, safety and programme management processes. Contribute to continuous improvement activities and share engineering best practice across project teams. What You'll Bring Typically 3+ years of experience in automotive product development. Experience with conventional powertrain systems, including engines and/or automatic transmissions. Strong understanding of engineering development processes, component validation and production release. Experience working with automotive suppliers and customer engineering teams. Ability to coordinate multiple activities and manage project deliverables in a fast-paced environment. Excellent analytical, problem-solving and communication skills. Fluent written and spoken English. Education & Technical Skills Bachelor’s degree in Engineering or equivalent qualification. Knowledge of automotive product development methodologies and APQP processes. Experience with CAD review processes, engineering drawings and GD&T principles. Knowledge of testing, durability, reliability and validation activities. Strong Microsoft Office skills with confidence in data analysis and technical reporting. Familiarity with automotive quality and change management processes. Interpersonal Qualities Proactive and professional communicator. Strong team player with the ability to influence stakeholders at different levels. Ownership mindset with focus on quality, delivery and customer satisfaction. Well organised, adaptable and results driven. Passion for engineering excellence and innovation

Are you a Manufacturing Engineer with a passion for continuous improvement, process optimisation and solving complex manufacturing challenges? I want to talk to you! I am looking for a Manufacturing Engineer to join a global manufacturer of premium construction equipment, recognised for its innovative engineering and high-quality heavy machinery. This is a fantastic opportunity to play a key role in improving manufacturing performance, supporting new product introductions and driving efficiencies within a modern, low-to-medium volume assembly environment. Manufacturing Engineer Permanent Competitive Salary Monday to Thursday, 6:15am – 4:15pm (Compressed Four-Day Week) Coventry Manufacturing Engineer Job Description Drive continuous improvement initiatives across assembly and manufacturing operations, using Lean principles and structured problem-solving techniques to improve quality, efficiency and productivity. Investigate and resolve manufacturing and build quality issues, implementing corrective actions and providing hands-on technical support to production. Support new product introductions and engineering changes by carrying out feasibility reviews covering tooling, manufacturing processes, Health & Safety, labour requirements and production costs. Develop, improve and maintain manufacturing processes, assembly instructions, tooling, risk assessments and visual management documentation. Manage product configurations, Bills of Materials (BOMs) and ERP data, working closely with Design Engineering and Product Management to ensure manufacturing accuracy. Deliver manufacturing improvements through Value Engineering, Design for Manufacture & Assembly (DFMA), Line Balancing, Takt Time optimisation, Time Studies and facility layout improvements to reduce cost, eliminate waste and improve production flow. Manufacturing Engineer Essential Experience/Skills/Qualifications Proven experience as a Manufacturing Engineer within an assembly or mechanical manufacturing environment. Strong knowledge of manufacturing engineering methodologies, including Value Engineering, DFMA, Line Balancing, Takt Time, Time Studies and facility layout optimisation. Experience managing engineering change processes, product configurations and Bills of Materials (BOMs). Experience using ERP systems and advanced Microsoft Excel for manufacturing analysis. Ability to read and interpret engineering drawings. Strong problem-solving skills with experience applying Lean Manufacturing and structured continuous improvement techniques. If you feel like this is a good fit, please email me at (url removed)

The AS9100 Supplier Auditor is responsible for evaluating and auditing supplier quality management systems to ensure compliance with AS9100 standards, customer requirements, and regulatory expectations. This role focuses on supplier performance, process effectiveness, and risk mitigation within the aerospace supply chain. Key Responsibilities: Conduct on-site and remote audits of suppliers to verify compliance with AS9100 requirements. Evaluate supplier quality systems, manufacturing processes, and inspection methods. Assess compliance with customer-specific requirements (e.g., flow-down requirements). Identify non-conformances, risks, and gaps; document findings and issue audit reports. Lead or support corrective action requests (CARs) and verify effectiveness of corrective actions. Perform supplier qualification, surveillance, and re-evaluation audits. Monitor supplier performance metrics (quality, delivery, and responsiveness). Ensure compliance with regulatory and industry standards (FAA, NADCAP where applicable). Collaborate with internal quality, engineering, and procurement teams. Support supplier development and continuous improvement initiatives. Qualifications: Degree in Engineering, Quality, or related field preferred. 3-5+ years of experience in aerospace quality, supplier quality, or auditing. Strong working knowledge of AS9100 and quality management systems. Experience conducting supplier audits and managing corrective actions. Proficiency in blueprint reading, GD&T, and inspection processes. Strong understanding of manufacturing processes and special processes. Excellent analytical, communication, and reporting skills. Preferred Skills: Lead Auditor certification (e.g., AS9100 Lead Auditor or ASQ Certified Quality Auditor). Familiarity with NADCAP requirements and audits. Experience with PPAP, SPC, and Root Cause Corrective Action (RCCA). Knowledge of ERP systems (e.g., SAP) and supplier portals. Experience with risk-based auditing and process-based auditing techniques

AMJ Recruitment are looking for Manufacturing Team Leader (with an FLT License) to join our valued Manufacturing Client, based in Coventry, CV6.You must have an FLT License, and demonstrate a good background within Manufacturing Management.Salary - £17.61 per hour, weekly pay (Salary rises after 12 weeks)Hours - Weekly Rotating Shift (AM and PM)AM Shift - 06:00am to 14:15pm Mon-Thurs. Fri 06:00am to 12:30pm (5 day Working Week)PM Shift - 14.00pm to midnight Mon-Wed. Thurs 14.00pm to 23.30pm (4 day Working week)Term - PermanentStart Date - ASAPReporting into - Production ManagerJob Duties Include:- Maintain Health & Safety and Environmental Standards- Ensure team members are aware of the quality standards required- Supervise and Manage: Oversee daily operations of the team, ensuring tasks are completed efficiently and effectively.- Motivate Team Members: Inspire and encourage team members to perform at their best, fostering a positive work environment.- Set Goals and Objectives: Establish clear performance goals for the team and ensure alignment with organizational objectives.- Delegate Tasks: Assign responsibilities based on team members' strengths and skills, ensuring optimal task distribution.- Provide Training and Support: Offer guidance and training to team members, helping them develop their skills and improve performance.- Monitor Performance: Track team progress and performance, providing constructive feedback and coaching as needed.- Communicate with Management: Act as a liaison between the team and upper management, reporting on progress and addressing any issues that arise.- Able to retain and distribute information to the team- Driving Fork lift truck when required to meet production targets- Participate in root cause investigation via 8d methodology- Encourage continuous improvement throughout the team- Develop and implement cost saving ideas- Hold briefings with team members as required- Use the maintenance system to identify tools or assets that require repair/refurbishment- Identify training needs of team members and arrange for training as necessary- Ensure team members understand how they are doing, including formal performance reviews.- Pass off production runs as required- Setting of equipment (Presses or Assembly processes) in line with formal training- Operating equipment when necessary to meet customer requirements.What our client is looking for from you?- Able to demonstrate strong leadership and motivation- Able to communicate, and monitor performance against, output and quality standards- Basic IT Skills, including Microsoft Word and Excel- Good numeric and literacy ability- Punctual and good attendee- Monitor process/machines with authority to close them down id product quality, procedures and/or work instructions are not compliant with laid out standards- Follow defined escalation process and take appropriate action relating to poor Quality, Cost and Delivery Performance- Act on behalf of the company during internal, supplier and customer meetings, representing the companies best interests at all times- FLT licenceTo apply, please send your CV over to the AMJ Recruitment Team, who will be in touch to discuss next steps.TPBN1_UKTJ

Architectural Metalwork Fabricator/Welder Requirements of the Fabricator / Welder: Extensive and current experience of staircase and balustrades welding & fabrication in Architectural Metalwork and MIG Must be able to TIG weld to a high standard · Accurately work from and interpret detailed drawings as and when required · Clamping, holding, tac-welding, heat-bending, bolting or grinding parts as necessary to satisfy technical requirements · Ensure parts are defect free from assembly process and previous operations Prioritize, generate and promote, safe working practices and adherence to Health and Safety standards at all times. To operate role related equipment within designated areas always using health & safety rules, whilst maintaining targeted output Consistently maintain and update all relevant documentation relating to production activities in line with agreed company standards ensuring that regulatory and quality requirements are met Maintain adherence to PPE standards Recording of quality issues and undertaking corrective action(s) Maintenance of a safe working environment, keeping areas always clear of debris and hazards and ensuring housekeeping standards are at an acceptable level, recognizing potential/actual hazards and taking corrective actions to minimize accidents. Follow company procedures relating to correct disposal of waste Not Essential but would be helpful if candidate holds a Forklift License (Counter Balance and Side Loader). Responsibility & Duties Complete all fabrication/welding tasks as assigned by the Workshop Manager accurately and efficiently, using own initiative as far as possible Notify Workshop Manager of any concerns in relation to the above You will need to be physically fit due to high levels of manual handling duties Take responsibility for the health and safety of yourself and of others who may be affected by your acts or omissions at work Must be able to work to deadlines and offer flexible working hours Key knowledge, skills & experience A valid UK Driving license A good standard of both written and spoken English Ability to work well under pressure Ability to work well as part of a team and also under your own initiative when required Well organised with excellent time management Demonstrate a desire for self-improvement and enthusiasm to learn new skills Ability to interpret and work from drawings * Ability to work on a variety of projects simultaneously Additional knowledge, experience and skills; 5 -10years experience with a proven track record working in Architectural and Metal workshop Working hours are Mon-Th- 06:30-15:30 Fri – 06:30-11:30. 39 hrs a week. Overtime at time and 3rd. Pay rate at £16/17 hr. Please call Carly at Quanta (phone number removed)

Quality Auditor – Children’s Social Care Location: Covering a portfolio of homes and schools, Coventry to Wiltshire. Hybrid with 3 days onsite auditing. Salary: £40K plus mileage allowance plus great benefits! Job Type: Full Time, Permanent Agency: Diamond Search Recruitment (representing our client) Diamond Search Recruitment are delighted to represent our client in the search for an experienced Quality Auditor within the children’s social care sector. Our client is a fantastic employer, known for its positive company culture, supportive leadership, and commitment to employee wellbeing. They offer attractive benefits and the opportunity to join a company where your contribution will be genuinely valued and recognised. This role plays a crucial part in ensuring high-quality, safe and compliant services across children’s residential and supported accommodation settings. Key Responsibilities Conduct high-quality audits across children’s homes and supported accommodation settings Assess compliance against regulatory frameworks and internal quality standards Produce clear, accurate audit reports and recommendations Support services in implementing improvements Work collaboratively with managers to drive quality, safeguarding and best practice Regular travel to sites across the region (3 days per week minimum onsite) Key Requirements Strong working knowledge of: The Children’s Homes (England) Regulations 2015 The Supported Accommodation (England) Regulations 2023 Experience in auditing, inspection or quality assessment in children’s social care Full UK driving licence and willingness to travel regularly Excellent communication, report-writing and analytical skills Strong commitment to safeguarding, quality and continuous improvement Benefits & Additional Information: Blue Light Card Colleague referral scheme with cash rewards – earn up to £2500 per referral! Financial wellbeing service Life Assurance Tastecard - spectacular savings on dining, pizza, cinema tickets, supermarkets, and UK attractions! Comprehensive and tailored induction programme including face-to-face training, online modules, shadowing, and local induction period. Face-to-face therapeutic training and support for all colleagues via our SHINE programme. Access to a wide range of free online courses for all colleagues on a variety of topics Employee assistance programme – free, confidential support. Community and wellbeing - Your wellbeing matters to us, and we are committed to ensuring you get all the support you need to feel good about what you do. We’re in this together. Supportive management and senior leaders. High quality CPD opportunities. Free eye checks. Interested? Apply today to be considered for this rewarding and impactful opportunity. Diamond Search Recruitment is acting as an Employment Agency regarding this vacancy

A sector-leading manufacturing company is entering the next phase of product development and is seeking an experienced Purchasing Manager to join its growing team. You will lead purchasing and procurement activities that support engineering product development and rapid production build increases for an innovative electrification powertrain programme. Candidates are sought with experience in a similar role and gained in the automotive, aerospace, defence, marine or electrification sectors in advantageous. The Role Develop and implement purchasing strategies aligned with business objectives. Identify and source new global suppliers for a range of products including mechanical, electromechanical and electrical products and engineering services. Negotiate contracts, terms and pricing with suppliers to ensure cost-effectiveness. Develop purchasing pipelines and achieve inventory optimisation. Implement procurement processes, supplier approvals and purchasing controls. Agree pricing, commercial agreements and contract terms with suppliers. Analyse market trends, material availability and supply risks. Work closely with engineering teams to support new product development Ensure purchased commodities meet quality and sector regulatory requirements. Drive continuous improvement initiatives across purchasing and supply chain The Person A proven purchasing management professional gained in a complex engineering or manufacturing sector. A hands-on approach with excellent influencing skills. Some experience working in complex low volume manufacturing and/or prototype is advantageous. Experience working in a highly regulated sector preferred, aerospace, automotive, defence, energy, marine, etc. Excellent commercial negotiation skills and previous contractual supplier agreements experience

Electronics TechnicianLocation: Coventry, Ansty ParkHours: 37.5 hours / Permanent Day shiftSalary: £42,000 - £43,800Are you an experienced Electronics Technician who thrives on fault-finding, precision repair, and working on safety-critical systems?We're looking for a skilled Electronics Technician to join a high-performing aerospace team, supporting the repair and overhaul of advanced electronic components used in aircraft braking systems.The RoleThis is a hands-on, technical position where you'll be responsible for diagnosing, repairing, testing, and certifying electronic assemblies and units to the highest aerospace standards.You'll play a key role in ensuring components are safe, compliant, and ready to return to service - work that directly impacts aircraft performance and passenger safety.What You'll Be DoingFault-finding and repairing electronic assemblies and sub-assembliesDisassembling, inspecting, and rebuilding complex unitsReplacing and repairing electronic componentsTesting products using a range of specialist equipmentWorking from engineering drawings, schematics, and manualsEnsuring all work meets strict quality and regulatory standardsMaintaining full traceability and accurate documentationSupporting continuous improvement in a lean manufacturing environmentWhat We're Looking ForYou'll likely already be working in a similar environment, such as aerospace, defence, rail, or high-reliability electronics manufacturing.Essential:HNC (or equivalent) in Electrical/Electronic EngineeringProven experience in electronics repair within a manufacturing or MRO environmentStrong fault-finding and diagnostic skillsAbility to read and interpret schematics and engineering drawingsExperience using electronic test and inspection equipmentIf you are an experienced Electronics Technician and are looking to join a leading aerospace organisation where quality, precision and technical expertise are highly valued, we would be keen to hear from you.TPBN1_UKTJ

About the Role Coventry City Council is seeking an experienced Social Worker to join its Help & Protection Team based within the Families For All Hub. This is an exciting opportunity to work within a supportive and dynamic frontline service, helping to safeguard children and support families to achieve positive and lasting outcomes. Rate: £28.55 per hour (Umbrella) As a Social Worker within the Help & Protection Team, you will work directly with children, young people and families, undertaking statutory interventions and delivering high-quality social work practice. You will manage a varied caseload, undertaking assessments, safeguarding work and direct interventions for children and families with complex needs. The role requires confident decision-making, strong partnership working and a commitment to delivering child-centred practice. Key Responsibilities Working with children and families in accordance with relevant legislation, statutory guidance and departmental procedures Undertaking complex assessments and developing effective intervention plans Managing Children in Need and Child Protection cases Delivering direct support and interventions to children and families Assessing and managing risk to ensure the safety and welfare of children Working collaboratively with partner agencies to achieve positive outcomes Supporting families through legal planning processes where required Preparing reports and providing instructions to Legal Services for court proceedings Maintaining accurate and up-to-date case records using Coventry City Council's recording systems Participating in supervision, training and continuous professional development activities Contributing to the ongoing development and improvement of the serviceRequirements Social Work England registration A recognised Social Work qualification Experience within Children's Services, particularly safeguarding and child protection Strong knowledge of relevant legislation, guidance and social work practice standards Experience completing assessments and managing statutory casework Excellent communication, assessment and report-writing skills The ability to work independently while maintaining strong collaborative relationships with colleagues and partner agencies A commitment to delivering high-quality outcomes for children and familiesWorking Arrangements The team operates a duty rota system, with social workers on duty 1 week in every 4 During duty weeks, staff are required to be office-based all week The service is predominantly office-based to support collaborative practice and service delivery Working from home can be arranged for 1 day per week, subject to service requirementsWhy Join Coventry City Council? Opportunity to work within a well-established Help & Protection service Supportive team environment and management structure Diverse and rewarding caseload Ongoing professional development opportunities The chance to make a meaningful difference to the lives of children and families across CoventryIf you are a dedicated and experienced Children's Social Worker looking to join a supportive and forward-thinking local authority, we'd love to hear from you

Manufacturing SupervisorLocation: BulkingtonPay: £33,000 - £38,000This role requires someone with a practical manufacturing background, ideally with experience or understanding of press shops, press tooling, industrial power presses, plant, equipment and basic maintenance coordination. The role also carries responsibility for supporting raw material control, steel supplier call-offs, quality standards, productivity improvements, training needs and facilities-related issues.Key ResponsibilitiesOperational LeadershipLiaise with the Operations Manager and Production Controller to ensure the needs of the business are met.Support the overall running of the factory and warehouse operations.Oversee manufacturing processes and systems to ensure they operate safely, efficiently and effectively.Assist press setters, warehouse staff and factory personnel where needed to ensure work can be completed safely and effectively.Coordinate adequate personnel levels during holiday, sickness and absence cover.Ensure required training needs are identified and communicated for factory and warehouse personnel.Work with colleagues at all levels of the business to maintain effective daily operations.Press Tooling, Plant and EquipmentFacilitate the setting and operation of plant, press tools and equipment.Support press setters with tooling, plant and equipment requirements.Ensure machinery, press tooling and equipment are operated in a safe and proper manner.Ensure calibrations are carried out when required.Identify and report defects, faults or maintenance requirements.Support the safe and effective use of industrial power presses and associated equipment.Maintenance and FacilitiesOrganise the repair and maintenance of plant, equipment and premises as required.Support routine maintenance activity across the factory and warehouse areas.Coordinate basic facilities repairs and premises-related issues where required.Ensure the factory and warehouse areas are maintained in a safe, tidy and operational condition.Respond to call-outs in the event of security or fire alarm activation where required.Quality, Compliance and Audit SupportMaintain and adhere to company quality standards and procedures, including ISO 9001:2015 and ISO 14001:2015 requirements.Work with internal and external quality auditors when assessing the company management system.Complete relevant actions or observations raised from audits.Investigate and complete PDRs to satisfactory resolution.Ensure factory and warehouse activities comply with current legislation, company standards and safe working practices.Continuous Improvement and Product SupportIdentify and support productivity and efficiency improvements.Carry out improvements where appropriate to support safer and more effective working practices.Support product development activity as and when required.Promote a practical, problem-solving approach across manufacturing and warehouse operations.If you have the skills and experience were looking for and want to join a forward-thinking company, wed love to hear from you!Click apply or call Roger at Resolute Recruitment.Skills RequiredMachine Operating, CNCKeywordscnc, setter, set, operator, operating, setting, engineering, engineer, days, day, night, nights, perm, permanent, leicester, leicestershire, loughborough, derby, derbyshire, hinckley, market, draw, drawing, program, programmer, working, factory, full, time, vernier, haas, grind, grinder, polish, polisher, head, aerospace, oil, gas, automotive, transport, weld, welding, welder, temp, temporary, work, working, job, jobs, le4, spindle, production, product, produce, automation, auto, milling, turning, aerospace, pm, machine, operatorTPBN1_UKTJ

Parts Business ManagerCoventryFull-Time HybridAbout the OpportunityOur client is a leading manufacturer operating within the high-performance automotive sector. They are seeking an experienced Mandarin speaking Parts Business Manager Europe to support the operational delivery of their European spare parts business. This role is responsible for parts availability, inventory performance, customs compliance, dealer support and operational improvement activities across Europe. Working closely with Regional Account Managers, technical teams, suppliers, logistics providers and dealers, you will play a key role in driving operational excellence and continuous improvement throughout the parts supply chain.Role OverviewIn this role, you will be responsible for the end-to-end execution of the European parts business. You will work closely with dealers, Regional Account Managers, technical teams, suppliers, freight providers and logistics partners to ensure parts are delivered efficiently, inventory is managed effectively, and all import/export activities remain compliant. This position plays a key role in delivering excellent customer service, optimising operational performance and supporting the continued growth of European Aftersales operations.Key ResponsibilitiesCoordinate with the IT department to support the development and enhancement of spare parts systems.Execute day-to-day import and export activities across EU and non-EU markets.Prepare and verify shipping, customs and trade documentation.Coordinate with customs brokers, freight forwarders and warehouse providers to ensure on-time deliveries.Monitor shipments and resolve delays, customs issues and discrepancies.Maintain accurate HS Code and Country of Origin (COO) data for all parts.Support dealer and internal enquiries relating to customs classification, origin and duty requirements.Process customised and non-standard parts orders from order receipt through to fulfilment.Work with engineering, suppliers and planning teams to secure parts availability.Identify opportunities to reduce freight, duty, packaging and inventory costs.Support shipment consolidation and logistics optimisation activities.Operate and maintain internal controls covering inventory, order management and trade compliance.Support internal audits, external audits and SOX compliance requirements.Maintain process documentation, standard operating procedures and work instructions.Deliver packaging optimisation projects to reduce cost, damage and environmental impact.Act as an operational point of contact for dealers and Regional Account Managers.Coordinate with technical teams to resolve parts and quality-related enquiries.Monitor stock levels, back orders, supersessions and obsolete inventory.Maintain inventory parameters including reorder points and stock levels.Drive actions to improve inventory accuracy, stock turns and service levels.Coordinate cycle counts and annual stock counts with third-party logistics providers.Investigate stock variances and implement corrective actions.Produce operational reporting and inventory analysis using business systems and reporting tools.What Youll BringBachelor's degree in Supply Chain, Logistics, Business, Engineering or a related discipline.Experience working in parts, aftersales, logistics or supply chain operations.Hands-on experience managing import/export activities and inventory control.Working knowledge of EU customs regulations, HS Codes, Country of Origin requirements and Incoterms.Experience supporting inventory management and stock optimisation activities.Strong Microsoft Excel skills.Experience using ERP systems such as SAP or similar platforms.Experience using WMS systems and operational reporting tools.Knowledge of Power BI or equivalent business reporting software.Strong analytical and problem-solving skills.Excellent communication and stakeholder management capability.High level of attention to detail and organisational skills.Fluent English language skills.Additional European language skills would be advantageous.Experience within an automotive environment would be beneficial.Experience working within an audit or SOX-controlled environment would be advantageous.Location & Working PatternLocation: Coventry, United KingdomWorking Pattern: Full-TimeOffice Attendance: HybridFrequent travel to Amsterdam is may be required to support business operations, suppliers, logistics providers and dealer networks across Europe. Applicants must therefore be able to travel without restrictions.Salary & BenefitsSalary: CompetitiveBenefits include:25 days holiday plus bank holidaysPension schemeAnnual bonus (non-contractual)Private healthcareEmployee Car Ownership SchemeGroup Income Protection subject to length of serviceFamily-friendly policiesAccess to an employee wellbeing, discount and recognition platformWhy Apply?This is an opportunity to play a key role in the operational success of a growing European aftersales business, working across logistics, customs compliance, inventory management and dealer support functions within a highly respected automotive organisation.If you feel you have the skills to succeed in this role, please click to apply.Arden White specialises in technical engineering recruitment, and all job applications are managed by our team. We believe in the value of a personal touch, and we work hard to deliver aswift, professional, and friendly service for our clients and candidates. We are acting as a recruitment agency on behalf of our client for this vacancy, and whilst we are advertising the role, we are not the hiring company.Due to the high volume of applications, were unable to respond to everyone individually. If you havent heard from us within 14 days, unfortunately youve not been unsuccessful on this occasion. However, please continue to monitor our website vacancies for more opportunities.TPBN1_UKTJ

Registered Home Manager Location: Godiva Lodge, Coventry, CV2 4PR Size: 40-bed Dementia Care Home Contract: Full Time, Permanent Salary: £44,500 per annum At Godiva Lodge, we believe great care starts with great leadership. We’re looking for an experienced and passionate Registered Care Home Manager to lead our 40 bed home in Coventry. Godiva Lodge is a fully Local Authority funded home, providing specialist care exclusively for people living with dementia. This is an opportunity to take ownership of a well-established service, influence its future direction, and create an environment where residents, families and colleagues feel valued. What You’ll Do: Champion Outstanding Care: Lead the delivery of personalised, person-centred care that respects the dignity, individuality and choices of every resident. You will create an environment where residents feel safe, valued and supported, while continuously seeking ways to improve quality and enhance the experience for those who call Godiva Lodge home. Lead with Confidence: Take ownership of regulatory compliance, audits and inspections, maintaining high standards in line with CQC requirements and best practice. You will be a visible and approachable leader who inspires confidence, supports your team through change and drives continuous improvement across the home. Inspire Success: Have overall responsibility for the home’s performance, including occupancy, budget management and community reputation. Working closely with central support teams, you will help ensure Godiva Lodge remains a home of choice for residents, families and prospective colleagues. Build Meaningful Relationships: Develop strong relationships with residents, relatives, healthcare professionals and local stakeholders. You will listen, communicate openly and work collaboratively to ensure residents receive the support they need to live well. Empower your Team: Create a positive and inclusive culture where colleagues feel valued, supported and proud of the work they do. Through coaching, mentoring and development opportunities, you will nurture talent, build future leaders and help your team deliver exceptional care every day. Who are we looking for? Previous experience as a Registered Manager with a proven track record of achieving Good or Outstanding CQC outcomes. A genuine commitment to person-centred care and improving the lives of older people Strong knowledge of CQC regulations, safeguarding, Mental Capacity Act and wider regulatory requirements. Experience managing budgets, occupancy and operational performance. The ability to lead, inspire and develop high-performing teams. A proactive approach to problem solving, continuous improvement and delivering positive outcomes. Qualifications: Level 5 Diploma in Leadership for Health & Social Care (or equivalent), or a willingness to work towards achieving the qualification

About the Role Coventry City Council is seeking an experienced Senior Practitioner to join its West Help & Protection Team. This is an excellent opportunity for a skilled and motivated social work professional to take on a leadership-focused role within a supportive frontline safeguarding service. Rate: £33.30 per hour (Umbrella) As a Senior Practitioner, you will play a key role in supporting the Team Manager and driving high-quality practice across the team. You will work closely with Social Workers, helping to maintain performance standards, promote best practice and ensure positive outcomes for children and families. This is an ideal opportunity for an experienced practitioner who is confident managing complex safeguarding work while also supporting colleagues with professional development and performance improvement. Key Responsibilities Supporting the Help & Protection Team with practice and performance management Assisting Team Managers in the oversight of caseloads and service delivery Providing guidance, mentoring and support to Social Workers across the team Managing complex child protection and safeguarding cases where required Promoting high standards of social work practice Supporting effective decision-making and risk management Working collaboratively with partner agencies to safeguard children and young people Ensuring statutory responsibilities and timescales are metRequirements Social Work England registration A recognised Social Work qualification Significant post-qualified experience within Children's Services Strong experience within Help & Protection/Safeguarding teams Experience managing complex child protection cases The ability to support and develop colleagues within a team environment Excellent assessment, analytical and leadership skills A strong understanding of statutory children's social care responsibilitiesWorking Arrangements Minimum of 3 days per week office-based Up to 2 days per week working from homeThis arrangement supports both team collaboration and flexible working. Why Join Coventry City Council? Opportunity to work within an established Help & Protection Team Supportive management structure Leadership and mentoring responsibilities Flexible hybrid working arrangements Chance to make a significant impact on outcomes for children and familiesIf you are an experienced Senior Practitioner looking for your next opportunity within a progressive local authority, we'd love to hear from you

Mechanical Maintenance EngineerLocation: CoventrySalary: £49,500 per annumShift Pattern: Days Only (Monday to Friday)About the CompanyWe are a well-established and growing food manufacturing business based in Coventry, supplying high-quality products to major retailers and customers across the UK. Due to continued investment and expansion, we are looking to recruit an experienced Mechanical Maintenance Engineer to join our engineering team.The RoleAs a Mechanical Maintenance Engineer, you will be responsible for ensuring the reliability, efficiency, and performance of production equipment across our manufacturing facility. Working on a permanent days shift, you will carry out planned and reactive maintenance activities while supporting continuous improvement projects throughout the site.Key ResponsibilitiesPerform planned preventative maintenance (PPM) and reactive maintenance on manufacturing and packaging machinery.Diagnose and repair mechanical faults to minimise downtime.Carry out welding and fabrication work as required to support maintenance and improvement projects.Operate workshop machinery and undertake machining tasks including the manufacture and modification of components.Produce and amend engineering drawings using CAD software.Assist with machinery installations, upgrades, and continuous improvement initiatives.Ensure all maintenance activities are completed safely and in accordance with company procedures.Maintain accurate maintenance records and documentation.Work closely with production teams to maximise plant performance and efficiency.RequirementsTo be successful in this role, you will have:Previous experience as a Mechanical Maintenance Engineer within a manufacturing environment, ideally food manufacturing.Strong welding and fabrication skills.Experience using manual machining equipment such as lathes and milling machines.Proficiency with CAD software and the ability to create and modify engineering drawings.Excellent fault-finding and problem-solving abilities.Knowledge of conveyors, pumps, gearboxes, bearings, pneumatics, and general production equipment.A recognised engineering qualification (Apprenticeship, NVQ Level 3, City & Guilds, HNC or equivalent) is desirable.A proactive approach with strong communication and teamwork skills.Salary & BenefitsCompetitive salary of £49,500 per annum .Permanent days shift role offering excellent work-life balance.Company pension scheme.Company Sick Pay - 1 month in a rolling 12-month period (following successful completion of probation).Retail Discount Scheme .Cycle to Work Scheme and Techscheme .Long Service Awards .GEM Awards - Employee Recognition Programme.Employee Assistance Programme (available to pension scheme members).4x Death in Service Benefit (available to pension scheme members).Ongoing training and development opportunities.Stable employment within a successful and growing food manufacturing business.Opportunity to contribute to continuous improvement and engineering projects.Apply NowIf you are an experienced Mechanical Maintenance Engineer with welding, fabrication, machining, and CAD experience and are looking for a rewarding days-based role in Coventry, we would love to hear from you.TPBN1_UKTJ

SHEQ Lead Solihull, Telford, or Colchester (Hybrid with Travel) £73,000 + Car Allowance + Excellent Benefits We're pleased to have been engaged by a major specialist contractor who is looking to appoint a SHEQ Lead. The organisation has over 3,000 employees, and this role reports into the Health and Safety Director. This role requires a confident self-starter who can drive forward a positive HSEQ culture in a fast-paced environment. This role would suit a forward-thinking safety professional with excellent communication skills and the ability to work autonomously. Responsibilities of the SHEQ Lead will include: Leading the delivery of the health and safety strategy across multiple projects while managing and developing the Health and Safety team. Proactively supporting site teams by providing expert advice and guidance on Safety, Health, Environment and Quality (SHEQ) matters, identifying opportunities for improvement and promoting best practice. Conducting site inspections and audits across the region, monitoring compliance, raising awareness of SHEQ standards and encouraging continuous improvement. Liaising with regulators where required, including the HSE, Environment Agency, and SEPA.The successful SHEQ Lead will have: Previous experience supporting multiple sites within the facilities management, construction, civil engineering or maintenance sectors. NEBOSH Certificate and ideally working towards the NEBOSH Diploma (or equivalent). Good working knowledge of ISO standards, with experience maintaining and improving integrated management systems. Excellent interpersonal and communication skills, with a proactive, positive and flexible approach to Safety, Health, Environment and Quality. This is a fantastic opportunity to roll out new initiatives, drive forward best practice and implement change within an industry-leading organisation. For further details, please contact Bethany at or (phone number removed). Job Reference: 4862. Irwin & Colton are a specialist Health and Safety recruitment company, based in the South East of England we recruit across the UK. We recruit all roles in the health and safety industry from Health and Safety Manager, Health and Safety Advisor, through to Health and Safety Director positions. Irwin & Colton Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website (url removed)

Role: Manufacturing / Process Engineer Location: Coventry Contract: 3 Months – Inside IR35 Day Rate: c£300 per day (Depending on Experience) Role Purpose The Manufacturing / Process Engineer is responsible for reviewing, optimising, and standardising manufacturing processes across production operations. The role focuses on ensuring alignment between physical manufacturing activities and documented procedures, improving operational efficiency through Lean methodologies, supporting continuous improvement initiatives, and assisting in the implementation of ISO 14001 environmental management standards. Key Responsibilities Process Review and Standardisation Conduct a comprehensive review of all existing production lines to ensure alignment between manufacturing processes and supporting documentation. Perform detailed gap analyses to identify discrepancies between documented and actual production practices. Determine and agree the correct process by assessing whether the physical manufacturing process is correct and documentation requires updating; or the documentation is correct and the manufacturing process requires adjustment. Review, verify, and update key manufacturing documentation, including Process Flow Diagrams, Control Plans, Work Instructions, Standard Operating Procedures (SOPs) Other associated manufacturing and quality documents Produce reports detailing findings, recommendations, and corrective actions. Bills of Materials Management Create and maintain accurate Indented Bills of Materials (BOMs) that reflect agreed manufacturing processes. Ensure BOM structures are aligned with operational requirements and support efficient production planning and control. Continuous Improvement and Lean Manufacturing Identify process improvement opportunities across production areas, including: Process flow optimisation, Factory and workstation layout improvements, Production line balancing Identify and eliminate sources of waste using Lean Manufacturing principles. Develop and manage Continuous Improvement (CI) projects to deliver measurable gains in efficiency, quality, productivity, and cost reduction. Support the implementation of Lean tools and best practices throughout the manufacturing environment. Environmental Management Systems Support the implementation and integration of ISO 14001 Environmental Management System requirements across the sites. Assist with environmental process reviews, documentation, compliance activities, and continuous improvement initiatives related to ISO 14001 certification and maintenance. Work with operational teams to ensure environmental objectives and standards are effectively embedded within manufacturing processes. Key Skills and Experience Experience in a Manufacturing Engineer, Process Engineer, Industrial Engineer, or similar role. Strong understanding of manufacturing processes, process mapping, and production documentation. Knowledge of Lean Manufacturing principles and continuous improvement methodologies. Experience creating and maintaining Bills of Materials (BOMs). Familiarity with Control Plans, Process Flows, Work Instructions, and quality management systems. Understanding of ISO 14001 environmental management systems is desirable. Strong analytical and problem-solving skills. Excellent communication and stakeholder management abilities. Proficiency in Microsoft Office and manufacturing/ERP systems. **You must have the right to work in the UK as sponsoship is not available

Job Title: MFL Teacher - Specialising in Spanish Location: Coventry Salary: £175-£255 (MPS/UPS, dependent on experience) Job Type: Full Time Start Date: New Term Start Are you passionate about the Spanish language and culture? Do you have the enthusiasm and ambition to inspire young people to become confident linguists and global citizens? We are looking for an exceptional Teacher of Spanish to join a successful Modern Foreign Languages department in Coventry. The successful candidate will have the ability to deliver engaging and challenging lessons that motivate students to develop their communication skills, cultural understanding, and confidence in language learning. This is an exciting opportunity to join a supportive and forward-thinking school where languages are valued, and students are encouraged to achieve their full potential. Your Contribution In this role, you will: Teach Spanish across Key Stage 3 and Key Stage 4, delivering lessons that inspire curiosity and enjoyment. Create a positive and inclusive classroom environment where students feel confident to communicate in Spanish. Use a range of teaching strategies to engage learners of all abilities and promote excellent progress. Assess student learning effectively and provide meaningful feedback that supports continued improvement. Play an active role in developing the Spanish curriculum and sharing best practice within the department. Support enrichment activities, including cultural events, language competitions, educational visits, or exchange opportunities where appropriate.We're Looking For The ideal candidate will: Hold Qualified Teacher Status (QTS) or be working towards achieving it. Have excellent subject knowledge and a genuine enthusiasm for teaching Spanish. Demonstrate high expectations for student achievement, behaviour, and participation. Be committed to delivering high-quality teaching and continually developing their own practice. Thrive as part of a collaborative department and contribute positively to the wider school community.Applications are welcomed from experienced teachers and Early Career Teachers (ECTs). Benefits for You: A welcoming and inclusive school community. A supportive Languages department that values collaboration and innovation. Excellent opportunities for professional development and career progression. A strong commitment to staff wellbeing and work-life balance. The opportunity to make a lasting impact on students' academic success and appreciation of languages.About Clarence Recruitment We are highly experienced recruitment specialists operating in the Education Sector. We work with exceptionally talented candidates whom we place into outstanding opportunities. As an independent agency, we're agile and responsive, ensuring your career goals are met. Apply Now If you're a passionate educator looking for your next opportunity, apply today. Interviews and placements are moving quickly. We are currently working with numerous vacancies so if this position is not quite for you, please do send us your CV to discuss other opportunities more suitable to your requirements. Safeguarding Clarence Recruitment is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. The successful candidate will need an enhanced DBS check in line with Keeping Children Safe in Education 2025

Night Shift Quality InspectorLocation: CoventryPay: £21.72 p/h - PAYEContract length: 6 monthsIf you're at your best when details matter, and you take pride in getting things right first time, this is a great opportunity. Our client is hiring for a Night Shift Inspector to support product quality through precise inspection, testing, and process control-helping ensure products meet the required standards and production stays on track.What you'll be doing: Programme and operate CMM equipment, generating reports to confirm product conformance Operate specialist test and measuring equipment to support quality outcomes Carry out Process Control Audits across key areas including Supplies, Manufacturing, Assembly and Despatch Undertake First Article Inspection in line with the Quality Procedure (QP) requirements Record and process non-conformances using the appropriate Systems, helping eliminate/minimise undetected errors Maintain calibration and quality standards by following required processes and completing associated checks Support production requirements with product assurance paperwork and documentation accuracy Maintain component traceability throughout manufacturing and report documentation errors to supervision Use the business system to record stock entry and make stock adjustments, and raise concessions/production permits where needed Attend and contribute to Daily Team meetings and support continual improvement and progression of processes within the cellWhat you'll bring: A strong quality mindset-accountable for accuracy, correctness and the standard of your work Confidence working to quality procedures and being meticulous with records and paperwork The ability to follow HS&E procedures and maintain a clean, well-organised workspace (including 6-S standards) Team working skills, with the ability to contribute to daily objectives and work collaboratively Comfort interfacing with people external to the Company when required Willingness to undergo training if required, and support others by sharing knowledge when needed The flexibility to work shift patterns to meet ongoing business requirementsAdditional information: You'll also be expected to comply with regulations for the control of technical data (as applicable) and undertake special duties as assigned.Ready to take ownership of quality on a night shift? Apply now to be considered for this Night Shift Quality Inspector role in Coventry.If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.TPBN1_UKTJ

The Job People are looking for Fabricator Welders to join a busy manufacturing plant in Coventry. The work is long term and can lead to a permanent contract after a qualifying period. To manufacture, repair, modify and assemble metal components and structures using welding and fabrication techniques while maintaining high standards of safety, quality and productivity Details of a Fabricator Welder in Coventry: Monday to Friday 8am till 4pm Monday to Thursday 8am till 2pm Friday 38 hours per week £21.12 per hour Overtime available Must be flexi to support business needs Ongoing work Long term opportunity Must have previous experience and certification / qualification As a Fabricator Welder, you would be required to: Read and interpret engineering drawings, specifications and work instructions. Fabricate, assemble and weld components to required standards. Operate fabrication equipment including saws, drills, grinders, presses and welding equipment. Carry out MIG, TIG and Arc welding as required. Inspect completed work to ensure compliance with quality requirements. Perform basic maintenance and care of welding and fabrication equipment. Follow health, safety and environmental procedures at all times. Support continuous improvement and TPM activities. Maintain accurate records of work completed and materials used. Work collaboratively with production, maintenance and engineering teams.Role of a Fabricator Welder in Coventry: Strong welding and fabrication skills. Ability to read and understand engineering drawings. Good problem-solving and fault-finding ability. Attention to detail and quality standards. Good communication and teamwork skills. Ability to work independently and manage workload. Knowledge of MIG, TIG and Arc welding processes Understanding of fabrication techniques and metal properties. Knowledge of health and safety regulations relating to welding and fabrication. Understanding of quality inspection methods and measuring equipment. Awareness of TPM and continuous improvement principles. Knowledge of manufacturing processes and production environmentsBenefits on working with The Job People as a Fabricator Welder: Weekly Pay. Holiday Pay. Payslip portal. 28 days holiday Pension Scheme. On-site canteen facility Outdoor area Free on-site parking. Locker Room. Prayer Room. Opportunity to go permanent. Opportunity to progress and increase your take home pay. Overtime available. Smoke / Vape area. Lovely / friendly team to work within. Supportive management.If you are interested in the role of a Fabricator Welder within the Logistics Distribution and Supply Chain Industry, we would love for you to apply. We aim to respond ASAP to our applications. Please ensure your CV is up to date. Thank you. The Job People is acting as an Employment Business in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

Hairdressing Trainer Assessor Location: Coventry and surrounding areas Free Parking Classroom teaching twice a week and then face to face delivery with travel to employer premises Ever felt that your hairdressing experience could go further than the salon floor and instead shape the next generation of industry professionals? At Able Personnel, we are recruiting on behalf of a respected and growing training provider for a passionate Hairdressing Trainer Assessor to join their expanding team. This is a face to face delivery Hairdressing Trainer Assessor role based in Coventry and surrounding areas with travel required to employer premises and training facilities. You will play a key role in delivering, coaching and assessing Hairdressing apprenticeship programmes at Levels 2 and 3, supporting learners through structured training and workplace assessment to achieve successful outcomes. What you will be doing: • Deliver Hairdressing apprenticeship training at Levels 2 and 3 as a Hairdressing Trainer Assessor – classroom delivery and in the workplace with learners • Plan and design curriculum content in line with apprenticeship standards and employer needs • Develop schemes of work, lesson plans and high quality learning resources • Complete inductions with apprentices and employers in the workplace • Create individual training plans based on initial assessments and learner needs • Deliver engaging training sessions using a range of teaching and digital tools • Embed Maths, English and professional behaviours into learning delivery • Support, coach and motivate apprentices to complete work within agreed timescales • Conduct workplace assessments using appropriate methods and technology • Provide clear, constructive feedback to apprentices and employers • Monitor learner progress and maintain accurate records and documentation • Carry out regular progress reviews with apprentices and employers • Prepare apprentices for End Point Assessment and support readiness • Liaise closely with employers to ensure effective workplace learning • Evaluate training effectiveness and support continuous improvement What we are looking for: • Level 3 Hairdressing qualification essential • Minimum two years industry experience in hairdressing • Experience delivering training, teaching or assessing learners • Strong communication, organisation and time management skills • Ability to engage and motivate learners in a face to face setting • Full UK driving licence with access to a vehicle • Enhanced DBS or willingness to complete DBS check Desirable: • Assessor qualification such as CAVA, TAQA or equivalent or teaching qualification such as PTLLS, AET or equivalent • Experience in teaching or assessing hairdressing Salary and benefits: • Salary £27,500 to £29,500 per annum • Full time 37 hours per week • Flexible and supportive working arrangements • Life assurance at three times annual salary • Employee assistance programme • Holiday purchase scheme up to five days • Increased annual leave after five years service • Cycle to work scheme • Electric car scheme • Salary sacrifice pension scheme If you are ready to use your hairdressing experience to train, assess and inspire apprentices into successful careers in the industry, this Hairdressing Trainer Assessor role offers purpose, stability and the opportunity to make a real impact in education and skills development

Our client Coventry City Council is looking for an Approved Mental Health Professional to join their team. Job Purpose To undertake statutory duties under the relevant mental health legislation (such as the Mental Health Act 1983 in England and Wales), including coordinating Mental Health Act assessments, making independent decisions about compulsory admission where appropriate, and ensuring that the rights, welfare, and least restrictive options for individuals experiencing mental disorder are upheld. Key Responsibilities Undertake assessments under the Mental Health Act and associated legislation. Coordinate Mental Health Act assessments involving medical practitioners and other professionals. Decide whether to make applications for detention under the Mental Health Act, exercising independent professional judgment. Ensure that individuals' human rights and legal safeguards are protected throughout the assessment process. Consider less restrictive alternatives to hospital admission whenever possible. Complete comprehensive risk assessments and formulate risk management plans. Work collaboratively with multidisciplinary teams, including psychiatrists, nurses, social workers, psychologists, and community services. Liaise with families, carers, advocacy services, police, ambulance services, and other partner agencies. Prepare accurate, timely, and legally compliant reports and documentation. Attend court hearings, tribunals, safeguarding meetings, and case conferences when required. Participate in an out-of-hours AMHP rota where applicable. Maintain up-to-date knowledge of mental health legislation, case law, and professional guidance. Contribute to service development, quality improvement, and professional training.Benefits of working with Remedy A personal one-one service from your highly experienced dedicated consultant. Top tier supplier across London giving us first access to jobs Referral bonus - up to £250 per person placed. Double payrolls each week. Terms & Conditions apply You will be required to fully register with Remedy for all locum positions. Remedy Social Care is a APSCo Standard agency and is committed to safeguarding and promoting the welfare of the vulnerable. Successful applicants will be required to undertake an Enhanced Disclosure via the DBS. Our objective is to be an equal opportunities employer and we welcome applications from everyone with suitable skills and ability regardless of race, colour, nationality, ethnic or national origin, gender, disability, sexual orientation, age, religion or belief. All applications will be accepted and reviewed solely on merit

Deputy Distribution Centre & Hub Manager Location: Coventry (CV6 5RY) Salary: £43,500 per annum Contract: Permanent Hours: 37.5 hours per week, working between 4:00pm – 12:00am (30-minute lunch break) Working Pattern: Monday to Friday Flexibility: Flexibility is essential to support operational requirements About the Company Our client is a leading provider of inventory management and logistics solutions, supporting businesses across the UK with the storage, management and distribution of critical parts and equipment. Their Coventry operation plays a key role in ensuring customers receive a reliable, efficient and high-quality service. They operate within a fast-paced environment where safety, accuracy, service delivery and operational excellence are at the heart of everything they do. They are now looking for an experienced Deputy Distribution Centre & Hub Manager to join their team and support the continued success of their National Hub and Distribution Centre. The Role As Deputy Distribution Centre & Hub Manager, you will be responsible for the operational performance of the Hub and Distribution Centre during your shift, ensuring the operation runs safely, efficiently and to schedule. This is a hands-on leadership role where you will lead operational teams, manage performance, support colleagues and work closely with business partners and suppliers to deliver excellent service levels. You will be responsible for ensuring operational targets, KPIs and customer expectations are achieved, while maintaining the highest standards of Health & Safety, security, compliance and continuous improvement. In the absence of the Hub & Distribution Centre Manager, you will assume responsibility for the overall management and performance of the site. Key Responsibilities Lead, motivate and support operational colleagues, business partners and suppliers to achieve operational and service objectives. Manage the day-to-day running of the National Hub and Distribution Centre during shift. Ensure the linehaul network operates safely, efficiently and on schedule. Monitor operational performance, ensuring service levels, KPIs, SLAs and productivity targets are achieved or exceeded. Support colleague performance, development, attendance and wellbeing through effective leadership and communication. Build and maintain strong working relationships with customers, suppliers and internal stakeholders. Ensure the security, integrity and safe handling of customer freight at all times. Identify and resolve operational issues quickly to minimise disruption to service. Drive performance improvement and support a culture of continuous improvement across the operation. Ensure excellent housekeeping standards are maintained throughout the site. Maintain high standards of site security and attend site outside normal working hours when required. Support compliance activities including audits, operational checks and monitoring of processes and procedures. Ensure all Health & Safety, environmental and ISO requirements are embedded within daily operations. Maintain up-to-date knowledge of operational procedures, company policies and business developments. Communicate key information effectively to colleagues and ensure teams are aligned with operational priorities. Work collaboratively with audit and compliance teams to maintain service quality and measure performance. Deliver excellent customer service by understanding customer requirements and responding to service expectations. Deputise for the Hub & Distribution Centre Manager when required. About You We are looking for an experienced operational leader who thrives in a fast-paced environment and has the ability to motivate teams, solve problems and deliver results. You will have: Previous experience managing teams within a warehouse, distribution, logistics or transport environment. Proven experience delivering against operational KPIs, SLAs and performance targets. Strong leadership skills with the ability to motivate, support and develop colleagues. The ability to work effectively under pressure in a busy operational environment. Strong analytical, problem-solving and decision-making skills. The confidence to make sound decisions and take ownership, even when information is limited or time-sensitive. Excellent organisational skills with the ability to prioritise competing demands. Excellent verbal and written communication skills. Experience managing relationships with customers, suppliers or business partners. A proactive approach with a focus on continuous improvement and operational excellence. Good knowledge of Health & Safety, compliance and operational standards. Strong IT skills, including Microsoft Office. Flexibility to support changing operational requirements. What We Offer Salary of £43,500 per annum. Permanent full-time position. 37.5 hours per week, Monday to Friday. 25 days annual leave plus public holidays, increasing to 30 days plus public holidays after 5 years’ service. Membership of the company pension scheme: 3% employer contribution 5% employee contribution Life assurance at 2x basic annual salary. Access to Perkbox rewards and benefits platform. Automatic enrolment into a healthcare cashback plan. Eligibility to join the EV salary sacrifice scheme following successful completion of probation. The opportunity to join a growing logistics operation with excellent development opportunities