Trabajos plumbing and heating engineer en LiverpoolCrear alertas

An excellent opportunity for an experienced Field Service Engineer – Mobile Welfare Units to join a well-established company. \n \n Job Type: Full-Time, Permanent \n Salary: Competitive Salary, Depending on Experience. \n Location: Liverpool – Home Based – Working in the Field. \n \n \n About The Company: \n \n They are a market leader in the repair and maintenance of towable and static cabins that keep site teams warm, fed and safe on construction, civils and events sites nationwide. \n \n About The Role: \n \n To attend, diagnose and repair mobile welfare cabins in the field — restoring generators, power, heating, water and waste systems to full working order, first-time wherever possible, while working safely and unsupervised at customer sites. \n \n The role is van-based and mobile, covering breakdowns and warranty/service work across customer and hire-fleet sites. A large share of faults are diagnosed remotely (via unit telemetry) before attending, so the engineer must be comfortable interpreting remote data and arriving prepared. \n \n What the Role Actually Deals With: \n \n\n • Generators / diesel engines - Oil pressure & oil-change faults, fuel systems, exhaust/DPF, alternator, AVR, governor, glow, E-stop, servicing. Engines: HATZ, Kubota, Lombardini, Perkins, Stephill (Boss L48/L70/L100 units).\n, • Plumbing, water & waste - Frozen/burst pipes, tanks, UV filters, water pumps, toilets, waste-level sensors, leaks.\n, • Electrical & power - 12/24V DC systems, Victron kit (inverters, Cerbo, MPPT/solar), fuses, relays, wiring looms, sockets, PIR lighting, "no power" / dead-console faults, electrical-test compliance.\n, • Diesel heaters - Parking/diesel heaters — glow-pin and fuel-pump failure, re-priming, rewiring, thermostats, frost-related no-heat.\n, • Batteries - Lithium battery diagnosis (100/200Ah), BMS behaviour, Victron charge settings, deep-discharge recovery, charge/hold faults.\n, • Telemetry / comms - Units not updating/communicating — SIM/modem, Cerbo, remote-monitoring diagnosis and SIM replacement.\n, • Towing & chassis - Lifting rams/pins, wheels-down locking, coupling, brakes, tyres — getting units mobile.\n, • Hydraulics - Power packs, rams, solenoids for raising/lowering units.\n, • Fabrication - Doors, door closers, hoods, structural repair.\n, • Solar - Panels and MPPT charge faults.\n\n Roughly 1 in 5 reported faults turn out to be user error — so customer education, clear on-site communication and honest reporting matter as much as the wrench work. \n \n Candidate Requirements \n \n Essential: \n \n\n • Proven multi-skilled field service / plant / mobile-mechanic background (welfare units, generators, plant, HGV, marine, motorhome/leisure, or similar).\n, • Diesel engine fault-finding and servicing (small industrial engines — HATZ, Kubota, Lombardini, Perkins or equivalent).\n, • 12V / 24V DC electrical competence — fault-finding wiring, fuses, relays, inverters, charging systems using a multimeter.\n, • Confident reading fault data / telemetry and working from remote diagnostics.\n, • Practical plumbing / water-system repair skills.\n, • Strong problem-solving and first-time-fix mindset; comfortable working alone and unsupervised.\n, • Full UK driving licence; B+E (trailer/towing) entitlement or willingness to obtain.\n, • Good customer-facing manner and clear written job reporting.\n\n \n Highly Desirable: \n \n\n • Electrical qualification — City & Guilds 2391 (Inspection & Testing) and/or 18th Edition (BS 7671); PAT competence.\n, • Experience with Victron energy systems (Cerbo GX, MultiPlus inverters, MPPT, VRM) and lithium/BMS battery systems.\n, • Diesel parking/air heater experience (Webasto/Eberspächer-type).\n, • Hydraulics (power packs, rams, solenoids).\n, • Fabrication repairs.\n, • Solar PV, and basic IT/comms (SIM, modem, routers) familiarity.\n, • Relevant safety tickets (CSCS Card, first aid, working at height, manual handling).\n\n Personal Attributes\n \n\n • Self-motivated and reliable — the customer's day-rate is stopped until the unit works again.\n, • Methodical and safety-first, especially around live electrics, fuel and lifting operations.\n, • Resilient and adaptable — outdoor, all-weather, sometimes remote sites.\n, • Honest reporter — records what was found and done, including when a fault is user error or unresolved.\nWorking Conditions\n \n\n • Field-based, mobile role with company van and tools.\n, • Regional travel to customer and hire sites; some early starts / site-hours working.\n, • Breakdown-response element — may include on-call / out-of-hours cover (to be confirmed).\n, • Physical role: lifting, working outdoors, in confined welfare-unit plant spaces and all weathers.\nWhat they offer\n \n\n • Competitive salary (depending on experience).\n, • Company pension.\n, • Company van, tools and PPE.\n, • Manufacturer and in-house training across generators, power, heating and telemetry.\n, • Varied, hands-on work with a UK manufacturer that builds what you fix.\n\n \n \n If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. \n \n The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.

Role: M&E EstimatorLocation: North YorkshireContract: PermanentSalary: £45,000 - £65,000 + Benefits (DOE)Omega are supporting a growing Mechanical & Electrical contractor in their search for an experienced M&E Estimator . This is an excellent opportunity to join a well-established business delivering projects across the commercial, industrial, residential, and renewable energy sectors. The successful candidate will play a key role in winning new business by preparing accurate cost estimates and competitive tenders across both mechanical and electrical disciplines, whilst supporting procurement and commercial activities.Key Responsibilities - M&E EstimatorTake ownership of the estimating process from receipt of tender documentation through to submissionPrepare detailed cost estimates and tender returns for mechanical and electrical projectsEstimate mechanical building services including HVAC, pipework, ductwork, plumbing, public health, and low-carbon heating systemsEstimate electrical services including power, lighting, containment, distribution, fire alarm, and data installationsInterpret drawings, specifications, and technical documentation to produce accurate take-offs and pricingLiaise with suppliers, manufacturers, and subcontractors to obtain competitive quotationsSupport procurement activities and supplier management across live projectsWork closely with engineers, project managers, and commercial teams to develop technically compliant and commercially viable solutionsAttend site surveys, pre-tender meetings, and client consultations as requiredEvaluate project risks, margins, and opportunities to produce competitive and profitable submissionsRequirements - M&E EstimatorEssential:Proven experience as an M&E Estimator, Mechanical Estimator, Electrical Estimator, or Building Services EstimatorStrong understanding of mechanical building services including HVAC, plumbing, pipework, and ductworkGood knowledge of electrical building services installationsAbility to interpret technical drawings, specifications, and tender documentationStrong commercial awareness with an understanding of project costing, margins, and riskExcellent numerical, analytical, and organisational skillsAbility to manage multiple tenders and work to tight deadlinesStrong communication and stakeholder management skillsDesirable:HNC/HND or Degree in Mechanical Engineering, Electrical Engineering, Building Services, or a related disciplineExperience estimating renewable energy projects including Solar PV, EV Charging, Battery Storage, and Heat PumpsKnowledge of BS7671, CIBSE Guidance, Part L Regulations, and SAP assessmentsExperience using estimating software and AutoCADProcurement and supplier management experienceBenefits - M&E EstimatorCompetitive salary packageHealth Cash PlanLife InsuranceCompany Pension SchemeBuy/Sell Annual Leave SchemeCycle to Work SchemeEmployee Referral BonusLong-term career progression opportunitiesOpportunity to join a growing technical services businessSupportive and collaborative working environmentFor more information on this role, please contact Kieren Provis on 01453 829776 or send a copy of your CV toCandidates who are currently an M&E Estimator, Mechanical Estimator, Electrical Estimator, Building Services Estimator, HVAC Estimator, Commercial Estimator, Bid Engineer, Mechanical Project Engineer, Electrical Project Engineer, or Building Services Engineer may be suitable for this position.For details of other opportunities available within your chosen field please visit our website .Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

Plumbing and Heating Engineer, Plumbing, Heating, Air Source Heat Pump Engineer, ASHP, Installing, Repairing, Installation Engineer, Service, Service, Team lead, Rotherham, Sheffield, Doncaster, Chesterfield, Barnsley. This role would suit a Plumbing and Heating Engineer or similar with experience I

The Plumber will perform drainage and plumbing services on commercial and domestic properties, including maintenance and repairs. Requires relevant qualifications and experience.

Are you a Heating Engineer / Plumber with a background in a Commercial environment looking to join a ambitious company looking to grow rapidly with plenty of progression opportunities available?This well-established company specialise within Commercial and Domestic heating & plumbing services across

Our client is a leading estate management company looking to expand it's team with the appointment of a plumbing & heating engineer to assist with the maintenance and works required on a wide range of proprieties in it's portfolio. You'll be responsible for the installation, service, maintenance and

Experienced gas engineers needed for fault finding, servicing, repairs, and CP12s in Ipswich. Requires ACS qualifications and fault-finding experience.

Seeking a Plumbing and Heating Engineer for residential installations in Didcot, performing first and second fix plumbing, boiler/radiator installation, and testing. Offers training, overtime, and progression.

Experienced Gas Safe Heating & Plumbing Engineer wanted for a full-time, permanent position with a family-run company in South Kent.

Are you an experienced plumbing and heating engineer looking to work on high end projects across the residential sector?. On offer is the opportunity to join a well-established plumbing and heating company with over 10 years of industry success and. Plumbing & Heating Engineer (Boilers / Heat Pumps)

Experienced heating and plumbing engineer needed for maintenance and installation work in domestic properties. Requires gas safe accreditation and driving license, with a salary range of £40,000 to £50,000 per year.

Service and maintain HVAC systems, including fault finding, PPMs, and ensuring compliance with industry standards.

Plumbing and Heating Engineer needed to handle tasks, installations, and represent the company professionally.

Pump Service Engineer, field-based, supporting clients with pumping, heating, and cooling solutions across the UK and Ireland. Includes overtime and callouts.

Must-Have Requirements forGas and Heating Engineer. Install, service, and repair domestic and commercial heating systems. Key Responsibilities forGas and Heating Engineer.

Seeking plumbers and drainage engineers with experience. Own tools and vehicle initially, company vehicle later.

Experienced Plumbing & Heating Engineer needed for installation, maintenance, and repair of systems in residential and commercial properties. Leadership role, mentoring, and ensuring projects are completed to high standards.

Experienced gas engineers needed for fault finding, servicing, repairs, and CP12s in Portsmouth and surrounding areas.

Seeking a Gas Safe Registered Plumbing Engineer to perform inspections, troubleshooting, and installations. Requires experience and good communication skills.

Seeking a qualified and experienced Gas Engineer for commercial and some domestic projects. Requires Gas Safe registration, NVQ 3, and own tools.

Responsibilities include planned and reactive maintenance of plumbing and heating systems. Seeking a Level 3 Plumbing & Heating Engineer for a stable, Monday-Friday role in a University Estate.

Experienced plumbing and heating engineer needed for diagnostics, repairs, and installations in South West London, Kent, and Sussex.

Commercial Gas Engineer needed for installation, maintenance, and client liaison in Peterborough, UK. Includes training and overtime opportunities.

The ideal candidate should be a technically strong, safety‑minded power‑electronics engineer with hands‑on site experience, excellent customer‑facing skills, and the ability to lead complex service activities on FACTS and HVDC systems with:. Perform commissioning activities on FACTS and HVDC

Apprentice Plumber The Army - United Kingdom From £26,334 a year As a full-time soldier, in a entry-level Plumber role, youll: Study plumbing and pipe fittings Learn to install and maintain heating systems including plumbing and pipework Learn how to make heat-loss calculations Become proficient in

Conduct inspections, testing, and planned maintenance of electrical installations and fire safety systems. Test, maintain and ensure compliance of emergency l.

Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption le

Able to form and maintain good working relationships at all levels, both internally and externally Ability to carry out electrical tests and fill in digital certification correctly and to high standard. Adhere with the Health and Safety at Work Act to take reasonable care of own health and safety an

Key responsibilities Respond to service requests for contracted and non-contracted customers Diagnose faults and complete effective repairs through adjustment, cleaning, or replacement of parts Carry out preventative maintenance in line with manufacturer guidance Install new equipment and ensure ful

The successful candidate will be responsible for the installation, servicing, maintenance, fault finding, and repair of a range of fire and security systems across commercial, industrial, and residential sites. We are seeking a skilled and reliable Fire & Security Engineer to join our growing team.

Our people create safety every single day, using their skills and experience to adapt to changing situations and rise to the challenges presented to them. Provide excellent customer service with internal and external customers, establishing and maintaining effective relationships with customers. Exp

Were looking for skilled and motivated Mobile Service Engineers to deliver exceptional aftersales support to our customers across the UK and beyond.

Solar PV Electrician £280-£350 a day Are you an experienced Solar PV Electrician, looking to join a well established business within the renewable sector, where you will directly influence the trajectory of the company? On offer is the opportunity to join an expanding company, giving you the chanc

Field Service Engineer HVAC / Heat Pumps Are you a skilled Field Service Engineer looking for a role with real variety, stability, and the opportunity to develop into renewable technologies? Were working with a growing and well-respected business looking to add a strong Field Service Engineer to the

Field Service Engineer HVAC / Heat Pumps Are you a skilled Field Service Engineer looking for a role with real variety, stability, and the opportunity to develop into renewable technologies? Were working with a growing and well-respected business looking to add a strong Field Service Engineer to the

Rate Job Type: Permanent, Full-Time Ready to Join a Growing Industry Leader? Interaction Technical are proud to be working with a well-established and rapidly expanding Material Handl. Field Service Engineer (Forklifts) Location: Bury St Edmunds, Suffolk Salary: £37,000 - £44,000 Basic Salary | OT

The Field Service Engineer, based in Wales, will report into the Technical Operations Manager and will be required to operate with a high degree of autonomy whilst working against pre-defined work schedules. Key Responsibilities and Accountabilities I. An exciting opportunity has arisen for a Field

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? Otis is growing and is looking for a maintenance/service engineer for to cover n West London. Your priority is to ensure the safety of passenger

Regional Field Service Engineer - Commercial Catering Equipment Location: Midlands Salary: £40,000 - £45,000 + Overtime + On-Call Allowances Shift Pattern: Days The Opportunity We are seeking an experienced Regional Field Service Engineer to join a leading service organisation specialising in comm

Fault finding, mechanical and electrical. Handrail replacement preferred but not essential. NVQ Level 3 in Escalator engineering or equivalent.

We listen closely, understand your goals, and deliver bespoke solutions that optimise processes, enhance performance, and reduce costsbecause we believe th click apply for full job details. At Argon, we are passionate about transforming how organisations in the private and public sectors leverage t