Process engineer jobs in Valley Stream, New YorkCreate job alerts

Job DescriptionJob Title: Engineering System OperatorDepartment: EngineeringMTA Agency: Long Island Rail RoadPrimary Location(s): Jamaica, NYPay Rate: $57.47* (See Wage Progression Chart)Regulated/Safety Sensitive: Safety SensitiveUnion Affiliation: Brotherhood of Railroad Signalman (BRS-241)Closing Date (if applicable): Open Until FilledShift (if applicable): Various Chartered in 1834, the Long Island Rail Road (LIRR) is the largest, busiest, and oldest continuously operating commuter railroad in the United States. In 2024, this 24/7/365 operation served 75.5 million riders on a system that stretches nearly 120 miles – from Penn Station and Grand Central Madison in Manhattan to Montauk on the eastern tip of Long Island. JOB SUMMARYThis is a training position established to qualify a candidate to assume the position of Engineer Systems Operator. This program will train the candidate to become familiar with all railroad and utility power distribution, MW Operations, and physical characteristics. Assist in providing a safe and efficient transportation system for the Railroad including Power, Communications, Track and Structures Systems while maintaining on-time performance. Keep the Chief Engineer, Asst. Chief Engineers, and Principal Engineers abreast of emergencies/operational issues and status. Assist in ensuring continuous around the clock, seven days a week coverage to immediately respond to all MW related emergencies, derailments, washouts, flooding, fires, vandalism, accidents, injuries, track and structures incident. Handle 35,000 power operations yearly. DUTIES & RESPONSIBLITIES: Responsibilities may include but are not limited to: • Assist in Managing and coordinating all Engineering Department decisions and operations made concerning the distribution of the entire Power system for the Long Island Rail Road. Control the equipment associated with the Third Rail System and Signal and Speed Control System., • Assist in Coordinating and implementing an effective Engineering Department response to all off-hour emergencies and problems (i.e., derailments, flooding, fires, vandalism, loss of power, etc.). Dispatch proper personnel to answer and expedite repairs involving Track, Structures and Power (Substations, High Tension and Electric Light & Power) disciplines. Coordinate trouble calls for Substation, Third Rail, High Tension, EL&P, Structures and Maintenance of Way areas. Assist in redirecting Signal and Communication calls to the proper Trouble Desk. Assist in Dispatching Maintenance of Way and Electric Traction emergency and night crews, managing all Maintenance of Way emergency call outs on a timely basis, have proper knowledge and understanding of all Call-Out agreements., • Assist in Developing and maintaining a comprehensive computer Data Base for failure reports, daily production reports, and trouble calls. Assist in Maintaining accurate records and logs of all Maintenance of Way and Power area activities and operations. Assist in Providing necessary daily reports and documentation; these activities will be kept on memory on a P.C. utilizing the most current software application., • Assist in developing and maintaining recording and processing of only Maintenance of Way staff Sick, Personal Day and Bereavement requests made during off hours. Assist in coordinating and filing all required forms, maintaining an accurate Data Base of such requests and submitting proper documentation. Assist in the Maintenance of accurate logs relative to non-power operations such as Accident Reports and safety statistics concerning the Power Discipline (Substations, High Tension & EL&P)., • Assist in the coordination of programmed power outages with Movement Bureau, Amtrak, Con Ed, LIPA, and Engineering Disciplines (Signal, Track, ET, Structures) and Capital Department., • Assist in Monitoring weather station, 24 hours, round the clock using the WDN Weather Consultant and DTN Datalite Weather Station, Platform Video Cameras, COMPUWEATHER and Brookhaven Lab Data in order to supply Railroad Management with the information necessary to make Operation decisions as consistent with emergency conditions., • Ensure a safe working environment and adherence to guidelines of company safety policies and procedures. Lead by example., • Perform other assignments as requested by Senior Management. REQUIRED EDUCATION AND EXPERIENCE Minimum experience as agreed between the Long Island Rail Road Company and the International Brotherhood of Electrical Workers Union Contract Agreement- Appendix F. If promotion cannot be reached by agreement, a candidate not covered by the IBEW agreement, must possess one of the following criteria:, • A minimum of five years demonstrated electrical/ LIRR Power department experience., • A minimum of two years’ experience in the traction power or utility field., • Previous experience as a Power Operator., • An Associate’s degree in Electrical Engineering, Electrical Technology or related field with two years electrical experience., • A Bachelor’s Degree in Electrical Engineering, Electrical Technology or related field with related technical knowledge in the field., • Must possess the ability to learn and retain the knowledge of Substation Equipment, (CRT BKRS [circuit breakers], Motor Generator, AC Switchgear, Relay Protection), Third-Rail Equipment (Rail, Board, Meg, Return, etc.), High Tension (Pole Lines, CRT [circuit] identification, Switches) and Electric Light & Power Facilities (Building, Elevators, Emergency Generators, Platform Lighting)., • Must possess the ability to learn and retain the knowledge of Track and Structures (M of W Switches, bridges, grade crossings, etc..) work maintenance procedures and materials., • Must possess the ability to learn and retain the knowledge of LIRR physical characteristics (ROW (right of way) and facility locations, road charts, etc.) and to keep abreast of system., • Must possess the ability to learn and retain the knowledge of proper Radio Communications procedures., • Must possess the ability to learn and retain an accurate knowledge of Union Work Rules to ensure applicable agreements are followed., • Must possess concise oral communications skills to express accurate and safe directions to managers, peers and subordinates., • Must possess ability to recognize, classify problems, and take proper action to remove power while under pressure in a precise and orderly fashion., • Must possess the ability to control the entire power plant from the supervisory control system., • Must possess knowledge of software programs (Data Ease, Word, Windows, etc.)., • Must possess electrical & mechanical knowledge of power distribution equipment which is essential for trouble shooting skills via the Supervisory Control., • Must possess the ability to learn and retain the knowledge of applicable call-out rules based on contractual agreements., • Must possess the ability to learn and retain the knowledge of Sick Leave and Benefits Administration policies and procedures., • Must possess ability to read and understand third rail drawings, Track charts, and signal and speed control diagrams. PREFERRED QUALIFICATIONS, • A Bachelors Degree in Electrical Engineering Wage Progression after completion of training: 80% -$45.97 90% - $51.72 100% - $57.47 OTHER INFORMATION • Employees driving company vehicles must complete defensive driver training once every three years for current MTA drivers; or within 180 days of hire or transfer for an employee entering an authorized driving position., • LIRR: In addition to meeting the minimum requirements of the position, the selection process may include but is not limited to, a pre-screening assessment (i.e., physical, written, and/ or practical evaluation) and interview. Candidates forfeit further consideration in the process if they fail to participate in any step of the process when scheduled. Make-up dates/times will not be given. In addition, LIRR employee applicants must be in their current position for the 12 months immediately preceding the close date of this posting and must possess a satisfactory work history, including attendance and discipline record. A record of more than ten sick days without medical documentation in two of the last three years is considered unsatisfactory attendance. Not all qualified applicants are guaranteed an interview due to the competitive selection process. A medical examination and safety-sensitive drug/alcohol test may also be required. #TapYourCareers #MTACareers EQUAL EMPLOYMENT OPPORTUNITY/ADA DISCLAIMERMTA and its subsidiary and affiliated agencies are Equal Opportunity Employers and encourage qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.If you seek a reasonable accommodation for a medical condition or disability, or for a religious practice or observance, to participate in the job application or interview process, please notify your MTA representative once you have been contacted regarding the role.

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Company Friedman Vartolo LLP is a fast-growing, New York-based law firm specializing in real estate and default services, with over 300 employees providing top-tier legal services to our clients in seven states. While our legal expertise sets us apart, it's our mindset that drives us forward. We bring a fresh, fast-paced energy that drives our momentum and shapes how we approach every challenge. We are a company that chooses to dig deeper, solving problems at the root instead of settling for surface fixes. Here, there are no passengers because every individual adds value, owns outcomes, and moves the firm forward. With an underdog mentality, we embrace constant elevation, always sharpening, always climbing, and never coasting. When challenges come, we row together and lean in as one team to get the job done, no matter what. The Position We are seeking a Production Reliability Engineer to own the operational health of our deployed internal application portfolio. The portfolio is growing rapidly - many new applications shipping every week - and we need a dedicated owner ensuring that what we deploy stays reliable, secure, and performant over its lifetime, and that the operational footprint stays manageable as the portfolio grows. This is a hands-on role for an engineer who thinks systematically about reliability, communicates clearly during incidents, and knows when to retire a deployed application that has outlived its usefulness. You will be the source of truth for "is our portfolio healthy" and the decision-maker on what gets maintained, what gets fixed, and what gets retired. You will work closely with the Senior Technology Manager, a DevOps Engineer (counterpart role), and a group of Production Engineers who own initial deployment and 30-day iteration of each application. Key Responsibilities: • Own the operational health of the firm's deployed internal application portfolio, • Lead incident response for production issues; serve as on-call rotation lead, • Manage security patching, dependency updates, base image refreshes, and certificate rotation across the deployed portfolio, • Conduct monthly triage of every deployed application - usage levels, error rates, security posture, retire/keep recommendation, • Maintain the application retirement queue and drive retire/deprecate decisions for low-usage or obsolete applications, • Define and track Service Level Objectives (SLOs) for application uptime, performance, and reliability, • Partner with the DevOps Engineer to ensure deployment pipelines incorporate reliability requirements from day one, • Produce a weekly portfolio health report - uptime trends, open incidents, security posture, retire/deprecate decisions, • Conduct incident postmortems and drive remediation actions to completion, • Contribute to security and compliance posture work (SOC2 readiness, Vanta evidence collection) as it relates to operational reliability Required Skills & Qualifications: • 5+ years professional experience in Site Reliability Engineering, DevOps, production engineering, or equivalent, • Strong incident-response experience - leading incidents, not just participating; comfortable owning the on-call rotation, • Experience defining and tracking SLOs and error budgets for production systems, • Strong Azure cloud experience (or directly comparable AWS / GCP experience), • Hands-on experience with monitoring, alerting, and observability tooling (Azure Monitor, Application Insights, Datadog, New Relic, or equivalent), • Comfortable reading code in multiple languages (TypeScript, Python, C# preferred) for incident triage and root-cause analysis, • Understanding of cloud security fundamentals - patching cadence, dependency management, secret rotation, base image hygiene, • Excellent written communication for incident comms, postmortems, and portfolio reporting Preferred Skills & Qualifications • Experience managing a portfolio of small-to-medium applications, rather than a single monolith, • Experience with security tooling (Huntress, Microsoft Defender, Vanta, similar), • Familiarity with Databricks, data warehouses, or analytics platforms, • Experience driving retire/deprecate decisions and the conversations that accompany them, • Experience in regulated industries (legal, financial services, healthcare), • Familiarity with compliance frameworks (SOC2, ISO 27001) from an operational-evidence perspective Benefits Friedman Vartolo LLP is proud to offer a comprehensive and competitive benefits package designed to support the well-being and security of our team. Our benefits include: • Paid parental leave options, • Short and long-term disability leave options, • Comprehensive medical, dental, and vision insurance, • Flexible Spending Accounts (FSA) and Dependent Care plans, • Commuter benefits including transit, and parking options, • Pet insurance to help care for your furry family members, • 401(k) retirement plans with employer contributions, • Gym and fitness reimbursements to support a healthy lifestyle, • Annual business expense reimbursements for attorneys, • Annual $500 travel budget to attend firm sponsored social events, • Hybrid work flexibility available after 90 days of employment * *Dependent upon specific position requirements and firm business needs Equal Opportunity Employer Friedman Vartolo LLP is an equal opportunity employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. ADA Compliance Friedman Vartolo LLP is committed to providing equal employment opportunities and complying with the Americans with Disabilities Act (ADA). We will provide reasonable accommodations to qualified applicants and candidates with disabilities, unless doing so would impose an undue hardship. If you require a reasonable accommodation to complete your application, participate in a job interview, or take part in any stage of the hiring process, please contact our Recruitment Team at recruitment@friedmanvartolo.com. Job Posted by ApplicantPro

Job Description Efficient Energy Compliance is looking for several qualified professionals dedicated to combating climate change by decarbonizing buildings and providing resilient solutions for new building systems. As a crucial part of our expanding team, this role will be contributing to EEC’s services of commissioning, retro-commissioning, energy auditing, and resiliency retrofits in the NYC area. We are seeking qualified individuals who will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below: We are seeking a Commissioning Engineer with a strong background in energy efficiency and building systems to join our team. The ideal candidate will be responsible for overseeing the commissioning process of energy-efficient systems and technologies in both new construc Responsibilities • Lead and manage the commissioning process from kickoff through closeout, keeping projects organized, on schedule, and moving forward, • Coordinate closely with ownership, design teams, contractors, and vendors to align scope, resolve issues, and maintain progress, • Conduct site inspections to verify system installations align with design intent, specifications, and energy efficiency goals, • Review submittals and shop drawings to confirm systems are being installed in accordance with project requirements, • Oversee and witness equipment startup, pre-functional checklists, and functional performance testing across all systems, • Perform system testing, diagnostics, and troubleshooting to verify proper operation and identify issues early, • Execute point-to-point verification and sequence of operations testing for HVAC, electrical, lighting controls, and BAS systems, • Maintain commissioning schedules, issue logs, and documentation, actively tracking deficiencies through resolution, • Work directly with GC and MEP trades during construction to support system readiness, coordination, and turnover, • Analyze BAS trends and system performance data to identify inefficiencies and optimize building operations, • Monitor and validate energy performance during commissioning, providing practical recommendations for improvement, • Ensure all commissioning activities align with applicable codes and standards, including NYC Energy Conservation Code (NYCECC), LEED, and ASHRAE guidelines, • Support multiple projects simultaneously while maintaining strong communication, organization, and attention to detail, • Prepare and contribute to preliminary and final commissioning reports, including all testing documentation and system verification, • Coordinate building turnover by supporting O&M documentation, as-builts, and training for facility teams, • Participate in seasonal testing and warranty phase reviews, helping identify and resolve post-occupancy issues, • Utilize commissioning platforms such as Bluerithm to manage workflows, testing, and reporting Requirements: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Energy Management, or a related field. 5+ years of experience in building systems commissioning, with a focus on energy efficiency and sustainable building practices. Strong knowledge of energy-efficient technologies, building systems (HVAC, lighting, controls), and renewable energy systems. Familiarity with commissioning processes for energy-efficient systems, including building automation, HVAC, and lighting systems. In-depth understanding of energy codes, standards, and certifications (e.g., NYC Energy Conservation Code, LEED, ASHRAE, Title 24). Experience with energy modeling and system analysis software (e.g., Trane Trace, EnergyPlus, etc.). Strong troubleshooting, diagnostic, and problem-solving skills. Excellent communication skills, with the ability to collaborate effectively with project teams, clients, and contractors. Ability to manage multiple projects and timelines, ensuring completion within scope, budget, and schedule. Preferred Skills: Certification as a Commissioning Professional (CxA) or LEED Accredited Professional (LEED AP). Knowledge of New York City’s energy codes and regulatory environment. Ideal Candidate Will Have • Excellent work ethic, • Strong verbal and written communication skills, • Excellent communication and presenter skills, • Attention to detail, • Strong time-management skills, • Strong organizational skills, • Self-motivation We thank all applicants for their interest, however, only those candidates selected for interviews will be contacted. We offer a competitive salary and good benefits package, including healthcare benefits and paid time off. 401K and Aflac & Flexible spending account. Interested candidates, please forward resume with salary requirements. Salary depending on experience. Efficient Energy Compliance LLC is proud to be an equal opportunity employer.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionBenefits: • Company parties, • Competitive salary, • Free food & snacks, • Paid time off ROSENBERG LAW GROUP PLLC Brooklyn, NY • Lawrence, NY IT Technician / AI Workflow Engineer / Cybersecurity Specialist Full-Time or Part-Time • Hybrid — Lawrence, NY / Remote • Reports to: Managing Attorney ABOUT ROSENBERG LAW GROUP PLLC Rosenberg Law Group PLLC (RLG) is a New York-based real estate law firm specializing in residential bank closings and property transactions. With offices in Brooklyn and Lawrence, NY, RLG serves lenders, buyers, sellers, and affiliated entities across the New York metropolitan area. The firm is committed to operational excellence, client confidentiality, and the strategic adoption of technology to deliver efficient, accurate, and secure legal services. As RLG continues to expand its practice and affiliated entities, we are investing in the people and systems that will power the next generation of our operations. POSITION OVERVIEW RLG is seeking a versatile and highly capable IT Technician / AI Workflow Engineer / Cybersecurity Specialist to own the firm's entire technology infrastructure. This is a unique, high-impact role that spans traditional IT management, cutting-edge AI workflow automation, cybersecurity compliance, web development, and mobile app development. The ideal candidate is a self-starter who thrives in a fast-paced legal environment, can work independently, and is excited about building technology systems from the ground up. You will work directly with firm leadership and have the opportunity to shape how RLG and its affiliated entities operate for years to come. KEY RESPONSIBILITIES 1. IT Infrastructure Management ●Administer and maintain all IT systems for RLG and its affiliated entities, including hardware, software, and network infrastructure ●Manage the Microsoft 365 environment (Exchange Online, SharePoint, OneDrive, Teams, Azure AD), including user accounts, licensing, and access controls ●Configure and maintain printers, scanners, workstations, and mobile devices across firm locations ●Coordinate with external vendors and service providers for hardware procurement, maintenance, and support contracts ●Monitor system performance, manage updates and patches, and ensure reliable uptime across all platforms 1. Cybersecurity & Compliance ●Design, implement, and maintain cybersecurity protocols across all firm systems and endpoints ●Enforce data encryption standards and secure handling protocols for confidential client documents and transaction records ●Ensure compliance with New York data privacy requirements and applicable legal industry security standards Brooklyn, NY & Lawrence, NY | Apply via CareerPlug | Page 1 Rosenberg Law Group PLLC | Confidential Posting ●Establish and manage phishing prevention measures, endpoint protection, and multi-factor authentication (MFA) policies ●Define and enforce role-based access controls (RBAC) and least-privilege principles across all platforms ●Develop and maintain an incident response plan; lead response and remediation in the event of a security event ●Conduct periodic security audits and vulnerability assessments 1. AI Workflow Development & Automation ●Build and maintain AI-powered automation workflows using Microsoft Power Automate, Microsoft Copilot, Perplexity, and similar platforms ●Automate document intake, routing, review, and processing workflows for real estate closings and legal transactions ●Develop AI-driven tools to reduce manual workload and streamline legal operations firm-wide ●Continuously evaluate emerging AI tools and automation technologies for potential adoption at RLG ●Document all automation workflows and maintain version-controlled process libraries 1. Website & Mobile App Development ●Build, maintain, and enhance firm websites and client-facing portals for RLG and affiliated entities ●Handle front-end and back-end web development, ensuring performance, accessibility, and security ●Apply SEO fundamentals to improve firm visibility and search rankings ●Implement and monitor web security protocols to protect against unauthorized access and data exposure ●Develop and maintain native iOS and Android mobile applications — this is a major plus and a significant area of investment for RLG 1. Third-Party Integrations & Connectors ●Connect, configure, and manage third-party integrations including WhatsApp Business, Plaid, SharePoint, OneDrive, CRM tools, and Meta/Facebook platforms ●Build and maintain API integrations to automate data flows between firm systems and external services ●Ensure all integrations adhere to security and data privacy requirements ●Troubleshoot integration failures and ensure continuity of business-critical workflows 1. IT Support & Staff Training ●Provide responsive, hands-on IT support to attorneys and staff at all firm locations ●Develop and deliver training sessions to onboard staff onto new tools, workflows, and platforms ●Create clear, accessible documentation and user guides for firm technology systems ●Serve as the primary technical point of contact for day-to-day technology questions and issues QUALIFICATIONS Required ●2–5 years of experience in IT support, cybersecurity, AI/automation development, or a related field ●Proficiency in the Microsoft 365 ecosystem: Azure AD, Exchange Online, SharePoint, Teams, OneDrive, and Power Automate ●Demonstrated experience building and maintaining AI tools and workflow automation platforms ●Working knowledge of cybersecurity frameworks (NIST, SOC 2, or equivalent) ●Web development skills including HTML, CSS, and JavaScript; experience with React or a similar framework is a plus ●Strong problem-solving skills and the ability to diagnose and resolve technical issues independently ●Excellent written and verbal communication skills — able to translate complex technical concepts for non-technical audiences ● Native iOS and/or Android app development (Swift, Kotlin, React Native, or Flutter) — a MAJOR plus; RLG is actively looking to develop mobile applications Advantage applicant has: ●Experience with document automation in a legal or financial services environment ●Familiarity with New York State data privacy laws and legal industry compliance requirements ●Hands-on API integration experience (REST, webhooks, OAuth) ●Prior experience working at a law firm, title company, or financial institution WHAT RLG OFFERS ●Compensation commensurate with experience across all applicable fields — candidates with broader or deeper expertise will be compensated accordingly ●Flexible schedule — the firm will consider both full-time and part-time arrangements ●Hybrid work model with remote flexibility and presence at our Lawrence, NY office as needed ●A rare opportunity to build and own the entire technology infrastructure of a growing law firm from the ground up ●Direct access to firm leadership and meaningful input into how technology shapes the practice ●A collaborative, entrepreneurial environment with significant room for professional growth as RLG and its affiliated entities expand HOW TO APPLY Rosenberg Law Group PLLC is an equal opportunity employer. We welcome candidates from all backgrounds who meet the qualifications above. Submit your resume, a brief cover letter, and any relevant portfolio or work samples via CareerPlug. Applications will be reviewed on a rolling basis. We look forward to hearing from you.

Job DescriptionQuality Management Systems Supervisor Job Summary The Quality Management Systems Supervisor will oversee the development, implementation, and maintenance of the organization’s Quality Management System (QMS) to ensure compliance with industry regulations and standards (ISO 9001, ISO 13485, AS9100). Reporting to the Director of Quality Affairs, this individual will drive continuous improvement, support in leading in internal/external audits, manage CAPA processes, and provide cross-functional training to enhance quality awareness. Key Responsibilities • Manage the QMS structure, ensuring all policies, procedures, and Work Instructions (SOPs) are compliant with regulatory requirements and align with company strategic goals., • With guidance from the Quality Affairs Director, lead both internal and external audits (customer, registrar, regulatory), coordinate audit finding responses, and verify the effectiveness of corrective actions., • Lead root cause analysis (RCA) for non-conformances, customer complaints, and deviations, implementing effective Corrective and Preventive Actions (CAPA)., • Drive continuous improvement initiatives using lean methodologies, SPC (Statistical Process Control), and data analysis to enhance operational efficiency., • Manage the electronic Quality Management Systems (eQMS) and ensure Document Control processes are current, accurate, and compliant., • Confirms alignment of all Quality programs within the organization., • Monitor and ensure the organization’s commitment to quality meets or exceeds customer requirements and the relevant regulatory standards., • Develop, trend, and report key QMS performance metrics (KPIs) to senior management and provide solutions to guide data-driven decision-making., • Develop training materials and educate staff on QMS procedures, GMP (Good Manufacturing Practices), or regulatory compliance to cultivate a culture of quality., • Consistently review SOP and other services to improve quality and contain costs. Required Qualifications • Minimum of 5 years of experience in a leading role in Quality Management Systems or Quality Assurance in the medical device industry required (spine or neuro device companies a plus)., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field. Master’s degree will be considered for 1 year work experience in related QMS field in medical device industry (preferably spine or neuro)., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Leadership ability in root cause analysis tools, Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPC), and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma Certifications preferred (Black Belt and/or Green Belt)Required Skills & Competencies, • Excellent written and verbal communication skills for interfacing customers and regulators., • Proven ability to partner and influence cross-functional teams, lead/mentor through collaboration and influence without direct authority., • Strong analytical abilities to interpret data and implement effective, sustainable solutions., • Proficient in problem solving with independent thought and judgement while using resources both internally and externally., • Work efficiently and proactively cross functionally in a team setting while being sensitive to deadlines., • High level of accuracy in document review and compliance assessment., • Successful record of ability to work both independently and in a team environment., • Skilled in statistical quality methods, Lean principles, Six Sigma, and Root Cause Analysis for data-driven decision-making., • Determined and proactive mindset who is motivated to make a difference with a high standard of excellence.Preferred Qualifications, • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)., • Experience in a heavily regulated industry (Medical Device or Pharma)., • Administration experience for document control. Salary Range: 95,000-105,000/annual An employment offer is based on the candidate's professional experience, specialty, skillset, education, geography, related licenses or certifications, and other business needs. The compensation range indicated does not include other forms of compensation or benefits. We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email hr@elliquence.com. Powered by JazzHR xLI3YJSudb

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Garden City, NY, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply., • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description About EWBC Exterior Wall & Building Consultants, Inc. (EWBC) is a specialty contractor providing construction labor, carpentry, project management, and specialty contracting services throughout the New York metropolitan area. We partner with many of the region's leading owners, developers, construction managers, and general contractors on commercial, residential, institutional, and infrastructure projects. We are seeking an organized, motivated, and driven Project Engineer to join our growing operations team. This position offers an excellent opportunity to gain hands on experience in construction operations while working directly with senior management and field personnel. The ideal candidate is looking to build a long-term career with a company that promotes from within. Position Summary The Project Engineer is responsible for supporting the day to day operations of multiple active construction projects. This role combines project coordination, labor management, payroll administration, billing support, field operations, and client communication to ensure projects are executed safely, efficiently, and profitably. The successful candidate will work closely with Project Managers, Superintendents, Foremen, clients, and the accounting department while gaining exposure to all aspects of construction management. Responsibilities • Coordinate daily labor assignments with Project Managers and field supervision., • Prepare and maintain manpower reports, labor tracking logs, and daily work reports., • Process weekly payroll by reviewing timecards, labor hours, and supporting documentation for accuracy., • Assist in preparing client billings, invoices, payment applications, and supporting documentation., • Monitor accounts receivable and assist with collections by coordinating directly with clients regarding outstanding invoices., • Assist in preparing change orders, time and material tickets, and supporting cost documentation., • Monitor labor productivity and compare production against project budgets., • Assist with project scheduling and manpower planning., • Coordinate material deliveries, equipment needs, site access, and project logistics., • Track project costs and assist Project Managers with budget reporting., • Maintain project documentation, daily reports, meeting minutes, and photographic records., • Ensure employee certifications, safety documentation, and project records remain current and compliant., • Participate in site safety walkthroughs and assist with documenting corrective actions., • Coordinate communication between field personnel, clients, subcontractors, vendors, and internal departments., • Utilize Microsoft Office and project management software to maintain project records and track progress., • Assist with project closeout documentation and final project deliverables., • Support Project Managers with all aspects of project administration as required. Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Engineering Technology, Business Management, or a related field preferred., • One to three years of construction or project management experience preferred. Strong entry level candidates are encouraged to apply., • Excellent organizational and time management skills., • Strong verbal and written communication skills., • Ability to manage multiple priorities in a fast paced environment., • Proficiency in Microsoft Excel, Outlook, and Word., • Valid driver's license and willingness to travel throughout the New York City metropolitan area. What We Offer • Competitive salary based on experience., • Medical, dental, and vision insurance., • 401(k), • Paid vacation, sick time, and company holidays., • Professional development and training opportunities., • Opportunity to work on some of the New York area's most recognizable construction projects., • A collaborative, team-oriented environment with significant opportunities for career advancement. Why Join EWBC? At EWBC, you'll work alongside experienced construction professionals on challenging, high profile projects throughout the New York metropolitan area. We believe in investing in our employees, providing opportunities for growth, and promoting from within. If you're looking for a career where you can make an impact and continue to develop professionally, we'd like to hear from you.

Job DescriptionJob Title: Substation ElectricianDepartment: Engineering MTA Agency: Long Island Rail Road Primary Location(s): Various 100% Hourly Rate of Pay: $42.601/hour *(See Wage Progression Chart)Regulated/Safety Sensitive: Safety Sensitive Union Affiliation: International Brotherhood of Electrical Workers (IBEW)Closing Date (if applicable): Open Until FilledShift (if applicable): Day Telework Eligible: No Chartered in 1834, the Long Island Rail Road (LIRR) is the largest, busiest, and oldest continuously operating commuter railroad in the United States. In 2024, this 24/7/365 operation served 75.5 million riders on a system that stretches nearly 120 miles – from Penn Station and Grand Central Madison in Manhattan to Montauk on the eastern tip of Long Island. JOB SUMMARY: Responsible for work in maintenance/construction crews that maintain, repair, and install associated Substation equipment including, but not limited to, high voltage AC switch gears, circuit breakers, line switches, Traction Power transforms, rectifier units, bus work, motor generator frequency changers, storage battery systems and chargers. Responsible for basic housekeeping duties within the Substation Compound. Perform all other duties deemed as Substation Electricians work by the Chief Engineer, Engineering Department. DUTIES AND RESPONSIBILITIES: • Overhaul and maintain silicon rectifiers and associated auxiliary equipment., • Install and maintain various types of oil, air and vacuum circuit breakers, motor generator sets and other duties considered Electricians' work., • Read and follow schematics, diagrams, and blueprints., • Troubleshoot and test wiring, relays and control circuits using various tools/meter., • Provide protection for contractors and force account personnel from hazards within the Substation and along the Right of Way. REQUIRED EDUCATION AND EXPERIENCE:, • A four-year high school diploma or its educational equivalent (GED or TASC) approved by a State's Department of Education or recognized accredited organization., • Must possess four years of electrical experience., • Must possess the ability to read electrical schematics, use volt/ohm meters, troubleshoot electrical circuits., • Must possess the ability to climb high voltage racks., • Must pass substation electrician qualifying examination., • Must possess a valid driver's license. PREFERRED QUALIFICATIONS:, • AAS Degree in Electrical Technology or Electrical Engineering. Wage Progression: If hired prior to 9/24/14: 70% - 1st 240 days of compensated service ($29.821) 75% - 2nd 240 days of compensated service ($31.951) 80% - 3rd 240 days of compensated service ($34.081) 90% - 4th 240 days of compensated service ($38.341) 95% - 5th 240 days of compensated service ($40.471) 100% - After 1,200 days of compensated service ($42.601) If hired after 9/24/14: 70% - 1st 240 days of compensated service ($29.821) 70% - 2nd 240 days of compensated service ($29.821) 75% - 3rd 240 days of compensated service ($31.951) 80% - 4th 240 days of compensated service ($34.081) 90% - 5th 240 days of compensated service ($38.341) 90% - 6th 240 days of compensated service ($38.341) 95% - 7th 240 days of compensated service ($40.471) 100% - After 1,680 days of compensated service ($42.601) OTHER INFORMATION: • Employees driving company vehicles must complete defensive driver training once every three years for current MTA drivers; or within 180 days of hire or transfer for an employee entering an authorized driving position., • Safety Sensitive, • LIRR: In addition to meeting the minimum requirements of the position, the selection process may include but is not limited to, a pre-screening assessment (i.e., physical, written, and/ or practical evaluation) and interview. Candidates forfeit further consideration in the process if they fail to participate in any step of the process when scheduled. Make-up dates/times will not be given. In addition, LIRR employee applicants must be in their current position for the 12 months immediately preceding the close date of this posting and must possess a satisfactory work history, including attendance and discipline record. A record of more than ten sick days without medical documentation in two of the last three years is considered unsatisfactory attendance. Not all qualified applicants are guaranteed an interview due to the competitive selection process. A medical examination and safety-sensitive drug/alcohol test may also be required., • #TapYourCareers, • #MTACareers EQUAL EMPLOYMENT OPPORTUNITY / ADA DISCLAIMER: MTA and its subsidiary and affiliated agencies are Equal Opportunity Employers, including those concerning veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply. If you require reasonable accommodation for a medical condition or disability to participate in the job application or interview process, please notify your MTA representative once you have been contacted regarding the role.

Job DescriptionJob Title: Junior Engineer-Communications Department: EngineeringMTA Agency: Long Island Rail RoadPrimary Location(s): Bethpage, NY 100% Hourly Rate of Pay: $40.385458*(See Wage Progression Chart)Regulated/Safety Sensitive: Safety SensitiveUnion Affiliation: Brotherhood of Railroad Signalman (BRS)-Local 241Closing Date (if applicable): Open till filledShift (if applicable): Day Telework Eligible: No Chartered in 1834, the Long Island Rail Road (LIRR) is the largest, busiest, and oldest continuously operating commuter railroad in the United States. In 2024, this 24/7/365 operation served 75.5 million riders on a system that stretches nearly 120 miles – from Penn Station and Grand Central Madison in Manhattan to Montauk on the eastern tip of Long Island. JOB SUMMARY:This is a training position designed to develop the employee for future management positions within the Signal Department. The employee will be required to learn and apply knowledge gained from classroom training, task assignments, field rotations, circuit plans, reading materials and on-the-job experiences. DUTIES AND RESPONSIBILITIES: • Observe, learn, and implement teachings in field and office., • Understand and learn principles of Railroad construction., • Demonstrate known engineering principles; learn and demonstrate daily on large construction jobs., • Must learn and demonstrate control of the following: manpower, material, equipment, track, budget and quality control., • Effectively communicate to form positive relationships and develop motivational skills, • Assume responsibility and initiative to get job done productively through the learned process of supervising., • Apply what is learned from LIRR references (i.e., textbooks, policies & procedures, such as CE-1, MW 1 & FRA)., • Learn union rules and agreements and apply to crafts under jurisdiction., • Become familiar with administrative forms required for project control, payroll, material, requisition, etc., • Ensure a safe working environment and adherence to guidelines of company safety policies and procedures. Lead by example., • Perform other assignments as requested by Senior. Management REQUIRED EDUCATION AND EXPERIENCE: • Bachelor's Degree from an accredited college in Telecommunications, Electrical/Electronic Engineering, Networking or a related field., • Must possess strong human relations, communication, interpersonal and judgment skills., • Must be self-motivated with the ability to provide solutions to complex problems., • Must be a detail oriented individual, with excellent comprehension and research skills., • Must be a critical thinker with excellent problem solving skills., • Must be available 24/7/365, • Valid Driver's License PREFERRED: • A minor in Computer Science or Business Management., • A Masters Degree with applicable work experience., • Technical writing skills, specification writing skills.WAGE PROGRESSION: First 6 months - $33.225216 6-12 months of service - $34.886476 12-18 months of service - $36.630800 18-24 months of service - $38.462341 24 months of service - $40.385458 BENEFITS: • Commuting Assistance – based on operating MTA agency (complimentary transportation pass within the MTA’s jurisdiction and tax-advantaged accounts), • Low Premium – High Quality Health Insurance Plans (lifetime coverage for eligible retirees and their dependents), • Pension plans and retirement savings accounts for eligible employees, • Generous Paid Time Off and Holidays provided., • Tuition Reimbursement for eligible employees, • Employee Assistance Programs, • MTA Exclusive Employee Discount Programs, • Work Life Services team and Office of the Chaplains unit, • Employee Resource Groups, • #TapYourCareer, • #MTACareersOTHER INFORMATION:, • Employees driving company vehicles must complete defensive driver training once every three years for current MTA drivers; or within 180 days of hire or transfer for an employee entering an authorized driving position., • Safety Sensitive, • LIRR: In addition to meeting the minimum requirements of the position, the selection process may include but is not limited to, a pre-screening assessment (i.e., physical, written, and/ or practical evaluation) and interview. Candidates forfeit further consideration in the process if they fail to participate in any step of the process when scheduled. Make-up dates/times will not be given. In addition, LIRR employee applicants must be in their current position for the 12 months immediately preceding the close date of this posting and must possess a satisfactory work history, including attendance and discipline record. A record of more than ten sick days without medical documentation in two of the last three years is considered unsatisfactory attendance. Not all qualified applicants are guaranteed an interview due to the competitive selection process. A medical examination and safety-sensitive drug/alcohol test may also be required., • #TapYourCareers, • #MTACareers EQUAL EMPLOYMENT OPPORTUNITY / ADA DISCLAIMER:MTA and its subsidiary and affiliated agencies are Equal Opportunity Employers, including those concerning veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply. If you require reasonable accommodation for a medical condition or disability to participate in the job application or interview process, please notify your MTA representative once you have been contacted regarding the role.

Job Description Job Type: Full-time Dept.: Information Technology Classification: Exempt EEO Code: Professionals Supervisor’s Title: CTO Hours: Monday- Friday, 830am to 5pm. Additional hours may be required as business necessitates. Date updated: November 2023 Job Summary: The Jr. System Administrator will provide stable and uninterrupted operation of all in-house computer systems, peripherals, tablets, and mobile devices, including assisting in planning, developing, installing, configuring, maintaining, supporting, and optimizing systems hardware, software, and communication links. This position requires independent analyses, effective and efficient communications, and complex problem-solving skills with a heavy focus on application-level support. Essential Job Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Provide front-end support to internal and external customers; diagnose and troubleshoot desktop-related issues (software installs, email configuration, and routing, hardware, applications, and peripherals), • Serve as an escalation point for the Service Desk, ensuring completion of Service Desk Tickets within required SLAs and to the customer’s satisfaction; perform advanced diagnoses of hardware and software, communicating the remediation plans to the team, the end-user, and to management as required, • Support the ERP system and all related modules; perform advanced application-level troubleshooting on the ERP platform as well as other industry-standard software, • Assist with conducting UAT and QAT on software and hardware releases as applicable to the business, • Assist with administration and maintenance of (systems-based and application) user accounts, permissions, and access rights, • Work with the Systems Engineer to perform routine system maintenance and system upgrades including service packs, patches/updates, hotfixes, and security configurations; conduct routine environment health checks, • Work within established configuration and change management policies to ensure awareness, approval, and success of changes made to the IT infrastructure (front and backend), • Maintain Department standardization of all hardware and software adhering to internal IT Controls and compliance policies, • Document and update technical procedures, administrative processes, and configuration management, • Assist with managing infrastructure assets: vendor support agreements, software licenses, hardware leases, and service contracts; assist with inventory management - monitoring and controlling inventory of IT equipment and consumables, • Protect the organization's value by keeping information confidential and maintaining safe/ethical computing practices, • Provide on-call emergency services after business hours, holidays, and weekends (as required) Must be familiar with all or some of the following technologies • Network troubleshooting (DNS, DHCP, and TCP/IP), • MS Windows 11, MS Windows Server platforms (2016 and greater) / Active Directory, • Application troubleshooting - Microsoft OS, Office 2016 (and greater), ERP/CRM type applications, • Mobile Device Management, • Virtualization technology, • Cloud based technology, • Antivirus and Anti-Spam technologies, • Backup software technologies and methodology, • Business Continuity Practice, • Remote access configuration & troubleshooting (VPN), • VOIP telephony services, • Website implementation and administration, • Video Conferencing technologies, • Ticketing System Position Requirements/Experience/ Education: • Bachelor’s Degree in Information Systems, Computer Science, or a related field is a must., • 2 years prior experience proving Tier 2 IT Support is a must., • Strong Application-level troubleshooting skills are a must., • Industry Standard Certifications (i.e. Microsoft) preferred., • Strong coordination, organization, teaming, and communication abilities., • Works well individually or in a group setting., • Strong interpersonal skills, able to deal effectively with people at all levels., • Consistent high level of customer care and responsiveness., • Good written and verbal communication skills., • Good organizational and time management skills., • Ability to work under pressure and with time constraints., • Successfully presents technical information to people at all levels ., • Technical knowledge base and excellent problem-solving skills., • Process improvement techniques., • IT Documentation. Ability Requirements: • Excellent follow-up skills, • Ability to set clear expectations within the division and multitask., • Solid decision-making skills within the scope of the position., • Ability to meet deadlines. Qualification Requirements: • Prioritizing, flexibility, adaptability, • Problem assessment and problem-solving, • Information gathering and information monitoring, • Demonstrated accuracy and attention to detail Functional Details: • Is this position closely, moderately, or minimally supervised? Minimally supervised., • Does this position have supervisory responsibility (i.e., responsible for hiring, firing, performance appraisals, etc.)? Yes No X_ If yes, list the number and title for positions that directly or indirectly report to this position (i.e., three secretaries, four programmers, etc.):, • Does this position have access to confidential information? Yes X No If yes, please explain: While servicing an employee’s PC, they have access to all information in the system., • Does this position have authorization to obligate company funds? Yes X No If yes, please explain: They have the ability to access P.O’s through GE., • This position requires what level of understanding of the English language? Fluent X Basic None • Will this person be required to pass a criminal background check, drug screening, DMV search, and reference verification? Yes X No If yes, please explain: He/she will need to successfully pass all the above screening requirements. • What type of equipment will this person need to do their job? Computer, office phone, mobile phone, external hard drive. Physical Requirements: Are there specific physical or environmental demands associated with this position? (Mark each activity with frequency level of either “C” constant; “F” frequent; “O” occasional; or “N” never.) Environmental/Equipment: O Around moving machinery O Exposed to marked changes in temperature O Exposed to dust, fumes, gases, etc. O Operates motorized equipment/tools O Works in confined spaces O Exposed to electrical wiring N Works at levels at or above 6 feet Physical: O Standing O Walking F Sitting O Bending O Squatting O Crawling O Kneeling O Climbing O Balancing O Pushing/Pulling F Handling Objects (manual dexterity) F Reaching above shoulder level F Using fine finger movements F Speaking C Hearing Carry/Lift Loads up to: Y 25 lbs Y 25-50 lbs N over 50 lbs

Job DescriptionJob Title: QMS Supervisor - Medical Devices Job Description The Quality Management Systems (QMS) Supervisor oversees the development, implementation, and continuous improvement of the organization’s Quality Management System to ensure full compliance with applicable regulatory and industry standards. This role partners closely with cross-functional teams to foster a strong culture of quality, maintain audit readiness, and drive continuous improvement initiatives across the organization. Reporting into senior Quality leadership, the QMS Supervisor plays a hands-on role in audit management, CAPA oversight, document control, and QMS performance monitoring, while serving as a key resource for quality training and compliance guidance. Responsibilities • Own and maintain the Quality Management System structure, including policies, procedures, standard operating procedures (SOPs), and work instructions, ensuring alignment with regulatory requirements and organizational objectives., • Support and lead internal and external audits, including registrar, customer, supplier, and regulatory audits, covering audit preparation, hosting, and response execution., • Lead root cause investigations for nonconformances, deviations, and customer complaints, and develop, implement, and verify effective Corrective and Preventive Actions (CAPAs)., • Drive continuous improvement initiatives using Lean principles, statistical tools, and data analysis to enhance product quality and operational efficiency., • Oversee electronic Quality Management Systems (eQMS) and document control processes to ensure data accuracy, robust version control, and ongoing compliance., • Develop, track, and present quality metrics and key performance indicators (KPIs) to leadership to support informed decision-making and strategic planning., • Deliver QMS, Good Manufacturing Practice (GMP), and compliance training to cross-functional personnel to reinforce quality awareness and accountability throughout the organization., • Ensure alignment and consistency of quality programs and processes across all relevant departments and functions., • Regularly review, assess, and improve quality processes to enhance effectiveness, manage risk, and control costs within the quality system., • Collaborate closely with cross-functional teams, including manufacturing, R&D, and operations, to support compliance-driven activities and initiatives.Essential Skills, • Minimum of 5 years of experience in a Quality Management Systems or Quality Assurance leadership role within a regulated industry., • Strong working knowledge of quality management standards and audit processes, including ISO-based quality system frameworks., • Proven experience leading CAPA investigations, including root cause analysis, development of corrective and preventive actions, and verification of effectiveness., • Hands-on experience administering and maintaining an electronic Quality Management System (eQMS) platform., • Expertise in document control systems, including change management and training record management in a regulated environment., • Ability to analyze quality data, identify trends, and implement sustainable corrective and preventive actions based on data-driven insights., • Demonstrated experience in quality assurance for medical devices, including exposure to spine, neurology, or implantable device products., • Experience with internal and external audits within a quality-regulated environment., • Strong understanding of regulatory affairs and quality assurance practices in regulated industries., • Excellent written and verbal communication skills, with the ability to interface effectively with auditors, customers, and internal stakeholders at all levels., • Demonstrated ability to influence cross-functional teams and lead through collaboration without direct authority., • Strong organizational skills and high attention to detail, particularly in managing regulated documentation and records.Additional Skills & Qualifications, • Experience working in the medical device industry., • Knowledge of FDA Quality System Regulation (QSR) and Good Manufacturing Practice (GMP) requirements., • Certified Internal Auditor or equivalent certification in ISO-based quality management systems., • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE) credentials., • Lean Six Sigma Green Belt or Black Belt certification or training., • Experience supporting manufacturing, research and development (R&D), and operations teams within a compliance-driven environment., • Familiarity with quality management standards such as AS9100 and ISO 9001., • Background in quality management for specialized medical device areas such as spine, neurology, or implantable devices.Work Environment This role is 100% office-based in a cubicle work environment, providing a structured and professional setting focused on quality and compliance activities. The position centers on the use of electronic Quality Management Systems and other office-based tools to manage documentation, audits, metrics, and training. The work environment supports collaboration with cross-functional teams, including quality, manufacturing, R&D, and operations. Eligible employees may receive a discretionary year-end bonus, which is not tied to individual performance. Job Type & Location This is a Permanent position based out of Baldwin, NY. Pay and Benefits The pay range for this position is $95000.00 - $105000.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available - They match 25% of 1%, up to 4%., • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) - 18 total days of PTO + 13 holidays Workplace Type This is a fully onsite position in Baldwin,NY. Application Deadline This position is anticipated to close on Jul 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Core team$200K - $300K/yr compensationGCPDevOpsCloud infrastructureKubernetesmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. GCP DevOps Engineer Job Type: Full-time Location: Remote - US Job Summary: Join our team as a GCP DevOps Engineer and play a crucial role in designing, building, and maintaining modern cloud infrastructure solutions. You will collaborate closely with talented engineers and stakeholders to deliver scalable, reliable, and secure environments on Google Cloud Platform (GCP). We are seeking a proactive professional with a passion for infrastructure automation and a strong commitment to clear, effective communication. Key Responsibilities: • Design, implement, and manage scalable cloud infrastructure solutions on GCP., • Automate deployment, monitoring, and management processes using industry-leading DevOps practices., • Administer and optimize Kubernetes clusters for maximum reliability and performance., • Collaborate with development teams to streamline CI/CD pipelines and refine workflows., • Ensure the security and compliance of cloud environments by applying best practices., • Proactively identify and resolve infrastructure bottlenecks and incidents., • Document solutions and processes with a focus on clarity and thoroughness to support team knowledge sharing. Required Skills and Qualifications: • Strong hands-on experience with Google Cloud Platform (GCP)., • Deep expertise in implementing and operating cloud infrastructure in production settings., • Proficiency with Kubernetes administration and orchestration., • Solid understanding of DevOps methodologies, tools, and best practices., • Experience building and maintaining CI/CD pipelines., • Competence with infrastructure-as-code tools (e.g., Terraform, Deployment Manager)., • Excellent written and verbal communication skills; ability to convey complex concepts clearly. Preferred Qualifications: • GCP certifications such as Associate Cloud Engineer or Professional DevOps Engineer., • Experience with hybrid or multi-cloud environments., • Familiarity with security best practices and compliance standards relevant to cloud-native architectures. Compensation & Benefits Notice The national pay range for this full-time position is base salary of $160,000-$220,000. All employees are eligible for equity compensation, and employees may also receive performance-based bonuses, dependent on role and subject to company policies. micro1 provides a comprehensive benefits package, including up to 100% reimbursement for health-insurance premiums, paid time off, a 401(K) plan with a company match, and additional benefits designed to support a high-performing, remote-first workforce. micro1 is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation during the application process, reach out to support@micro1.ai. Our hiring process utilizes artificial intelligence tools to assist in candidate screening and assessment. Our AI tools are designed to complement, not replace, human decision-making. Disclaimer The information contained in this job posting, including but not limited to role responsibilities, qualifications, compensation, and benefits, is provided for informational purposes only and does not constitute a binding offer of employment. micro1 reserves the right to amend, modify, or withdraw any portion of this posting at its sole discretion and without prior notice. All employment decisions are made in accordance with applicable laws and regulations.

Process Engineer Job Duties: Oversees and assesses existing processes and workflows. Assembles reports to document process status and changes. Utilizes process simulation software to test and find the

Collaborate with engineering teams to ensure new supplier products meet design specifications and quality requirements throughout the development process. Provide guidance and coaching to junior quality engineers on supplier quality management practices. Bachelor’s degree in Engineering, Quality,

To request reasonable accommodation to participate in the job application or interview process, contact Sye-Eun Ahn, Director of the Office of Equal Employment Opportunity, at sahn1@health.

Welsbach Electric is seeking a Project Manager to lead electrical construction and maintenance projects from turnover through closeout.Based in College Point, NY, this role is responsible for coordinating project scope, schedule, budget, documentati Project Manager, Manager, Project Management, Lead

A baccalaureate degree from an accredited college with a major in geology, engineering, earth sciences, environmental sciences, or a closely related field, including or supplemented by 24 semester credits in any of the following areas: rock and soil mechanics; structural geology; soils; sedimentatio

Collaborate with engineering teams to ensure new supplier products meet design specifications and quality requirements throughout the development process. Experience with Department of War (DoW) programs, procedures, and processes. Senior Supplier Quality Engineer (SQE) to join our Quality team.

A baccalaureate degree from an accredited college with a major in geology, engineering, earth sciences, environmental sciences, or a closely related field, including or supplemented by 24 semester credits in any of the following areas: rock and soil mechanics; structural geology; soils; sedimentatio

Computer Science, Electrical Engineering, or related disciplines OR Master’s degree in Computer Science, Electrical Engineering, or related disciplines with a minimum of 2 years of industry experience OR Bachelor’s degree in Computer Science, Electrical Engineering, or related disciplines with a

A baccalaureate degree from an accredited college or university in engineering, engineering technology, architecture, landscape architecture, architectural technology, construction, construction management, construction technology, sustainable design, urban planning, urban studies, city planning, tr

Minimum 15 years of environmental engineering experience, including significant project engineering, proposal preparation, and budgeting responsibilities. TRC, member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. This is a sen

This opportunity is with a small-sized organization that specializes in providing exceptional engineering solutions for the construction industry. A strong understanding of MEP construction, design, and installation processes.

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Bachelor's BS in Engineering from a four-year college or university. Contribute to the continuous improvement of project management processes and documentation.

Strong understanding of construction processes including scheduling, budgeting, and subcontractor coordination. Bachelor's degree in Construction Management, Mechanical Engineering, or related field.

Perform project management duties for complex IT projects, including those involving AI solutions, in accordance with PMLC and SDLC processes. Collaborate with these stakeholders to understand business needs, processes, and data sources.

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Through a direct-to-consumer model, we deliver premium fiberglass products, personalized in-home consultations, and professional installationmaking the window replacement process simple, seamless, and satisfying. For more than a century, we've been at the forefront of designing, building, and engine

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Bachelor's Degree in Construction Management, Engineering, or a related field is highly desirable. If an individual is contacted for services outside of EMCOR's normal application process it is probably fraudulent.

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

As a Project Manager, you will assist through proposal development and then lead the process through project closeout punch lists. Knowledge of creative processes and terminology is a plus.

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Linde Engineering Americas (LEA) is a member of the Linde Engineering Division of Linde plc. Areas of expertise include hydrogen solutions, air separation, carbon capture, adsorption, gas processing, deep cryogenics, liquefied natural gas (LNG) and fired process equipment. Experience in engineering,

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Coordinating architects, engineers, owners, and subcontractors. Supporting project turnover and closeout processes. Bachelor's degree in Construction Management, Engineering, Architecture, or related field.

Lead the change management process to include:. Participate in problem solving and value engineering planning. Meet regularly with Superintendent(s) and/or Project Engineer(s) to review and coordinate upcoming work and needs such as equipment, material, and subcontractors.

Develops project initiation process by defining project scope, determining action items, assigning ownership, creating project timetables, and tracking execution and workflow; prepares, presents and distributes project status reports. Ensures availability of performance measurement data for review a

Influence senior leaders and stakeholders to adopt new ideas, approaches, processes, or tools that improve execution and outcomes.

Business Objective: Own the creation of business processes and controls to maintain compliance by partnering with stakeholders within the Business, Legal, Risk, Controls and Compliance. Project Management: Manage smaller projects supporting the JPMorgan Private Client agenda and the implementation o

Perform project management duties for complex IT projects, including those involving AI solutions, in accordance with PMLC and SDLC processes. Collaborate with these stakeholders to understand business needs, processes, and data sources.

Gadge USA was established in 1993.Our company is a national packaging supply and supply-chain solutions company with an expansive distribution network.We manage packaging portfolios across multiple categories, combined with a scalable service model, which delivers packaging solutions and continuous

Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.