Welder jobs in BathgateCreate job alerts

SCOMAC CATERING EQUIPMENT LTD - FABRICATOR WELDER - RAF-4215ScoMac Catering Equipment Ltd is one of the largest independent commercial catering manufacturers / suppliers within the U.K, to which you can trace back over 120 years. An excellent and varied opportunity has arisen to recruit for an experienced Fabricator/Welder to complement our existing team.Based in Livingston, Scotland this role reports directly to the Senior Production Manager. This role is responsible for manufacturing and installing custom counters and fitments for the commercial catering industry. Other duties involved in this role are as follows:Main duties will include:Read and interpret engineering drawings.TIG weld thin sheet metal, including stainless steel.Using hand tools and polishing equipment, sand and polish to a high standards matching the finish of the sheet/box section.Assemble components by mechanical means other than welding.Be able to use a guillotine, press brake, chop saws and all workshop machinery as and when required.Maintain and ensure equipment is safe, clean and in good working order, reporting any defaults that may arise.Ensure work areas are kept clean and tidy, adhering to Health and Safety procedures and policies at all times.Any other duties commensurate within this position and skill set required.Skills & Experience Required:Experience of working on a shop floor environment, (ideally within sheet metal) and or a similar role is a distinct advantage along .Must be capable of welding thin stainless-steel sheets from 1mm to 2mm in thickness.Metal polishing experience would be an advantage.Possess knowledge of fitting and assembling.Experience of using Press Brake equipment is preferred, but not essential, as this enables a greater level of flexibility within this role.Must be flexible to attend site as and when required.Be able to agree and meet reasonable time scales for the work required.Have the ability to work within a team or on your own initiative, able to solve problems.Pay attention to detail and quality.Possess the ability to multitask.What we offer in return:Salary is negotiable dependant on skills and experienceFull time permanent Contract.Access to a contributory company pension scheme.To find out more about our Company please visit our company website.We are an equal opportunity employer.Thank you, we look forward to receiving your application.TPBN1_UKTJ

Welder Salary: Circa £40,000 - £41,000, rising to £46,000 - £48,000 after 3 monthsWorking Hours: 3 Shift Pattern (Days/Backs/Nights), moving to a 4 on, 4 off Continental Shift Pattern after training.Commutable from: Edinburgh, Livingston, Dunfermline and surrounding areas. First Achieve's Engineering Division are recruiting for an experienced Welder to join a global manufacturing leader. This is an excellent opportunity to secure a permanent position with a world-class engineering business offering long-term stability, genuine career progression and excellent earning potential. Following an initial three-month training period on a rotating days/backs/nights shift pattern, you'll move onto a 4 on, 4 off continental shift pattern, increasing your salary to circa £46,000 - £48,000 per annum. The Role Working within a busy manufacturing environment, you'll be responsible for producing high-quality welded components to exact engineering standards using a range of welding processes. Key Responsibilities • Carry out MIG, TIG and ARC welding on a variety of metal components and fabrications., • Assemble and weld components in line with engineering drawings and specifications., • Set up and operate welding equipment safely and efficiently., • Inspect completed welds to ensure they meet quality and customer standards., • Read and ...

Connect Appointments is recruiting a Welder/Fabricator to join a globally recognised manufacturing business based in Livingston. Our client is a well-established international manufacturer with a modern, well-organised workshop and a strong team culture. What's on offer? Full-time permanent position Monday to Thursday, 6am to 4pm £16 per hour + £1,000 sign-on bonus Salary sacrifice pension matched up to 8% Bonus scheme and company sick pay Group life insurance and retail discount schemeAs a Welder/Fabricator, your duties will include: TIG and MIG welding across a variety of fabrication projects Reading and working from detailed engineering drawings Working on general sheet metal and light fabrication work Using hand and power tools to trim, cut and fit components Adhering to all health and safety procedures at all timesTo be considered as a Welder/Fabricator, you will need: A minimum of 2 years experience as a Welder/Fabricator in a manufacturing environment Proven TIG and MIG welding skills The ability to read and interpret detailed engineering drawings A valid driving licence is preferred but not essentialInterested in this Welder/Fabricator role? Apply now or call us on (phone number removed). CATECH...

Fabricator / Welders x 2 Location: Bathgate The Role We are looking to recruit experienced Fabricator / Welders to join our client's main metal fabrication facility in Bathgate. You will be involved in the fabrication and welding of anti-vandal cabins, internal and external staircases, ramps, and associated steel structures used within our modular buildings. Key Responsibilities Fabrication and MIG welding of steel components in various positions Manufacture of staircases, ramps, and structural steelwork Working from engineering drawings and specifications Maintaining high standards of quality, accuracy, and safety Supporting production targets in a fast-paced environment About You Time-served Fabricator/Welder with extensive experience in steel fabrication Fully competent in MIG welding Experience working with structural steelwork (e.g. stairs, ramps) Ability to read and interpret technical drawings Strong attention to detail and commitment to quality * Flexible approach to overtime when required Basic rate of pay £17.00 per hour Start date – Monday 6th July 2026 These opportunities are initially on an ongoing temporary basis but could lead to full-time permanent for the right candidates Interested? Please forward CV in the first instance...

SCOMAC CATERING EQUIPMENT LTD - FABRICATOR WELDER - RAF-4215 ScoMac Catering Equipment Ltd is one of the largest independent commercial catering manufacturers / suppliers within the U.K, to which you can trace back over 120 years. An excellent and varied opportunity has arisen to recruit for an experienced Fabricator/Welder to complement our existing team. Based in Livingston, Scotland this role reports directly to the Senior Production Manager. This role is responsible for manufacturing and installing custom counters and fitments for the commercial catering industry.Other duties involved in this role are as follows: Main duties will include: Read and interpret engineering drawings. TIG weld thin sheet metal, including stainless steel. Using hand tools and polishing equipment, sand and polish to a high standards matching the finish of the sheet/box section. Assemble components by mechanical mea...

Experienced Welder (Sub Arc) needed for welding, fabrication, and repair work in a manufacturing environment.

SVQ3, City & Guilds, or equivalent) Ensure you are experienced in ceramic‑tile welding, Flux‑Cored Arc Welding, Metal‑Cored Arc Welding, and associated equipment Demonstrate your ability to produce welds that consistently meet visual and NDE examination standards You will be skilled in wel

Are you a MIG Welder from a manufacturing or construction background looking for a days-based permeant role, with a fantastic work life balance, within a company who will further boost your earnings through generously paid overtime?.

Seeking an experienced Tig Welder / Fabricator to perform welding and fabrication tasks, working with stainless and mild steel, reading engineering drawings, and meeting deadlines.

Skilled fabricator needed to read technical drawings and use measuring tools for gas turbine repair.

Seeking an experienced Tig Welder/Fabricator for a permanent, full-time role involving metal manufacturing with stainless steel and mild steel.

Experienced Fabricator/Welder needed for structural steel and metal work, MIG & TIG welding, working from drawings.

MIG Welder / Fabricator – Rotherham. Winner Recruitment are working with a growing engineering company in Rotherham who are looking to recruit an experienced MIG Welder / Fabricator to join their workshop team.

Welder/Fabricator (Company Funded Training). Are you an Junior Welder/Fabricator or someone with basic engineering experience looking to develop a career in welding within a busy and supportive xxuwjjq workshop environment?.

MIG Welder needed in Prestwick for a manufacturing client.

Experienced Plater Welder needed for fabricating steel.

Well established and Based in Blackburn, Lancashire our clientspecialise in the design, manufacture and installation of structural steelwork, laser cutting, sheet metal fabrication and platforming.Ideally, located within commutable distance to Blackburn.The successful applicant will have a proven tr

Experienced Welder needed for a structural steel company in New Milton, UK.

TIG welder needed for sheet metal fabrication.

Seeking a MIG Welder/Fabricator with experience on heavy machinery for a permanent, days-based role.

Seeking a welder with MIG welding and fabrication experience for a full-time role in Alsager, involving working from engineering drawings and inspecting welds.

Our client is a leading manufacturer and is looking for a welder and fabricator to join their busy manufacturing team. Role Welder and Fabricator role.

Now Available: Class 1 Coded Welders – Plymouth. We are seeking skilled Class 1 Coded Welders to join a dynamic team in Plymouth. If you are a Class 1 Coded Welder looking for your next challenge in Plymouth, we want to hear from you!.

Seeking a self-motivated Metal Fabricator and Welder for a full-time, permanent position.

Skilled Welder to work at their facility based near Burnley.

As a welder you will be working with goods on-site to get them cut and ready to go out dependant on clients specification. EARN UPWARDS OF £680 A WEEK AS A MIG/TIG WELDER IN DERBY. Looking for a new opportunity as a welder in Derby? We have a role for you!.

Seeking a MIG Mild Steel Welder/Fabricator for a full-time position.

CDS Labour are currently looking for an experienced Plater/Welder/Fabricator to join a well-established Engineering Business based in Sheffield who are adding to their growing team on xdjnayx a temp to perm basis.

Seeking a Welder to join a team, responsible for quality checking, fusing metal, operating welding machinery, and adhering to safety requirements in a workshop environment.

Are you an experienced welder with experience in manufacturing or engineering? xxuwjjq Are you seeking a new role that matches your career development and aspirations? Well, read on!! My client has secured several major aerospace projects and have an orderbook bur.

They are looking to bring onboard a number of skilled and experienced Aluminium Welders to bolster their team in Heysham. Aluminium Welder Job Requirements. Aluminium Welder Salary & Benefits.

Experienced Welder needed for structural steel welding.

Seeking an experienced MIG Welder for a manufacturing team.

MIG/MAG Welder wanted for a UK leading Heavy Goods Vehicle manufacturer in Warwick.

Skilled Fabricator Welder needed for workshop to fabricate and weld steel components using MIG, ARC, and TIG welding.

Were working with a well-established engineering company thats busy and growing, and theyre looking for a skilled Fabricator Welder to join the team on a temp to perm basis.

Seeking an experienced Fabrication Welder for a role in Skelmersdale, Lancashire, offering top hourly rates.

TIG Welder needed for a manufacturing company in Wolverhampton.

The Welder Fabricator will perform MIG welding, build and assemble fabrications using engineering drawings, and inspect their work.

Are you a skilled welder and fabricator looking to apply your expertise in a specialist engineering environment? We are looking for a Welder/Fabricator to join our team and play a key role in the fabrication and assembly of high-quality process equipment.

Seeking a time-served welder experienced in MIG flux-core welding for a heavy engineering and manufacturing company in Lanarkshire.

Seeking a skilled welder and fabricator to join a specialist engineering team, responsible for the fabrication and assembly of high-quality process equipment.