Trabajos steel en GlasgowCrear alertas

Industrial Door Engineer – Scotland- £38,000 £42,000 Basic Salary + Company Vehicle + Overtime £38,000 - £42,000 basic salary (depending on experience). Company vehicle. Company mobile phone, uniform and PPE provided. Overtime paid monthly. Structured on-call rota (scheduled in advance). Private healthcare. Employee Assistance Programme. Company pension. Ongoing training and support towards industry qualifications. 28 days annual leave, plus an additional 4 days over the Christmas and New Year period. Holiday entitlement increases with length of service. Long-term career with a well-established and growing business. Role Overview We are recruiting for two experienced Industrial Door Engineers to join a well established and growing business covering Scotland. This is a field based role involving the installation, service, maintenance and repair of a wide range of industrial door systems. You'll be working across commercial and industrial customer sites, delivering high quality workmanship and excellent customer service whilst representing a respected independent company. Industrial Door Engineer – Role & Responsibilities Install, service and repair industrial door systems. Carry out planned preventative maintenance and reactive repairs. Fault find and diagnose mechanical and electrical issues. Work on roller shutters, sectional doors, high-speed doors and steel doors. Complete digital job sheets and service documentation accurately. Communicate effectively with customers, colleagues and office staff. Ensure all work is completed safely and to a high standard. Work independently whilst supporting the wider engineering team. Participate in a structured on-call rota. Industrial Door Engineer – Skills & Experience Required Proven experience installing, servicing and repairing industrial door systems. Experience working on roller shutters, sectional doors, high speed doors and steel doors. Strong fault finding and problem solving skills. Experience working with a variety of industrial door manufacturers. IPAF and PASMA certification. Full UK Driving Licence or equivalent is essential. Excellent communication and customer service skills. Ability to work independently and as part of a team. DHF qualifications and/or a CSCS Card would be advantageous. Get Staff acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Ship Fitter - Govan \n We are seeking an experienced Ship Fitter / Fabricator to support the fabrication, assembly, installation, and outfitting of large steel structures within a marine and heavy engineering environment. The successful candidate will play a key role in delivering high-quality products while maintaining the highest standards of safety and workmanship. \n Key Responsibilities: \n\n • Mark off and ...\n\n \n ZIPC1_UKTJ

Principal Structural Engineer Glasgow | Hybrid Working An excellent opportunity has arisen for an experienced Principal Structural Engineer to join a growing multidisciplinary consultancy with a strong pipeline of projects across the renewable energy, commercial, residential and public sectors. This role will suit a technically strong and collaborative engineer looking to take a lead role in the delivery of complex building structures projects while supporting and mentoring junior team members within a dynamic engineering environment. The Role: You will play a key role in delivering structural solutions across a varied portfolio of projects, working closely with multidisciplinary teams including MEP, architecture and specialist consultants. Responsibilities will include: • Leading structural design delivery across steel, concrete and masonry projects, • Producing and reviewing structural calculations and technical drawings, • Coordinating BIM/CAD outputs and multidisciplinary design information, • Attending client, design and coordination meetings, • Supporting and mentoring junior engineers and technicians, • Contributing to sustainable and low-carbon design solutions, • Carrying out occasional site visits and technical inspections Requirements: • Degree qualified in Civil or Structural Engineering, • Chartered or working towards Chartership (ICE or IStructE), • Strong experience in structural design using steel and concrete, • Experience with Tekla Structural Designer and related software, • Background delivering building structures projects within the UK, • Understanding of portal frame design and industrial/energy projects desirable, • Strong communication and stakeholder management skills, • Experience working within multidisciplinary design teams What's on Offer: • Opportunity to work on high-profile renewable energy and infrastructure projects, • Hybrid and flexible working arrangements, • Strong focus on technical development and progression, • Collaborative and supportive team environment, • Competitive salary and benefits package

We're recruiting experienced Fabricators / Platers to join a major UK naval shipbuilding programme in Glasgow. Working as part of a skilled production team, you'll fabricate, assemble and install structural steelwork and ship components, contributing to the build of complex defence vessels. Key Responsibilities: Fabricate and assemble ship structures including shell plating, decks, bulkheads, frames and longitudinals. Mark out and fit steelwork from engineering drawings. Manufacture and install fabricated items including ladders, platforms, seating and panels. Install watertight doors, hatches, equipment foundations and deck coverings. Operate fabrication machinery including rollers, flanging machines, guillotines and saws. Carry out plate preparation using oxy-fuel cutting, grinding and drilling equipment. Work safely to quality and production standards within a heavy engineering environment.Requirements: Time-served Fabricator/Plater apprenticeship or equivalent. Experience within shipbuilding, heavy engineering, marine, defence or structural steel fabrication. Ability to read and interpret engineering drawings. Strong fabrication, fitting and assembly skills. Oxy-fuel cutting and fabrication machinery experience is advantageous

\n Morgan Hunt are working with a UK-wide consultancy to recruit a Structural Design Engineer to join their Glasgow team. You will take ownership of projects from concept through to completion. You must have strong experience in the design and delivery of building structures and will be confident managing multiple projects, coordinating with clients and design teams, and mentoring junior engineers where appropriate. The role sits within a team responsible for a number of building structures projects - specifically in residential, retail and commercial buildings. \n \n Key Responsibilities: \n \n • Lead the structural design and delivery of a wide range of building projects from feasibility through to construction\n, • Take responsibility for the technical delivery, programme, and quality of assigned projects\n, • Produce and review structural calculations, drawings, specifications, and technical reports\n, • Design in a variety of materials including steel, reinforced concrete, masonry, and timber\n, • Coordinate effectively with architects, contractors, MEP consultants, and other members of the design team\n, • Attend client meetings, design workshops, and site visits as required\n, • Provide practical and cost-effective engineering solutions while maintaining compliance with relevant standards and regulations\n, • Review and oversee the work of graduate and junior engineers, providing technical guidance and support\n, • Contribute to business development by building and maintaining strong client relationships\n \n \n Requirements: \n \n • Degree in Civil or Structural Engineering.\n, • Chartered Engineer, or working towards chartership\n, • Significant experience in the design of building structures within a consulting engineering environment\n, • Experience delivering projects across multiple sectors\n, • Experience mentoring junior engineers and technicians\n, • Proven ability to lead projects and manage multiple commissions simultaneously\n, • Excellent knowledge of Eurocodes and UK building regulations\n, • Experience designing in steel, concrete, masonry, and timber\n, • Proficiency with structural analysis and design softwares\n \n Benefits: \n \n • Competitive salary\n, • Flexible and hybrid working\n, • Pension scheme\n, • Generous annual leave entitlement\n, • Training and support towards continued professional development\n, • Opportunities to work on a diverse portfolio of high quality projects\n, • A collaborative and supportive working environment with genuine opportunities for career progression\n \n \n Please get in touch for further information. \n Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role. \n

Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite – Must be able to attend a recruitment day in Glasgow Salary: £40,016 – plus 33% shift allowance where applicable Shift Pattern: Days – Mon-Thurs, 07:00-16:30, Nights – Mon-Thurs 20:30-06:00, Weekends – Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. What you’ll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You’re experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade‑standard techniques You’re able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE, COSHH and risk‑assessment requirements and apply them consistently on the job You’ve worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It’s a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you’ll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK’s most advanced naval shipbuilding projects. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 28th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-AP1 #LI-Onsite

We are seeking skilled and experienced Fabricator Platers to join a major defence shipbuilding programme in Glasgow. This is an excellent opportunity to work on a long-term naval engineering project, fabricating and assembling large steel structures that contribute to the construction of complex vessels. What you'll be doing: Interpreting engineering drawings and marking out materials ready for fabrication. Preparing plate using a range of fabrication techniques, including oxy-fuel cutting, grinding and edge preparation. Fabricating and assembling structural steelwork including shell plating, decks, bulkheads, frames and longitudinals. Manufacturing a variety of fabricated components including hatches, ladders, access platforms, flooring systems, equipment foundations and other steel assemblies. Forming materials using fabrication machinery such as rollers, presses, guillotines, croppers and mechanical saws. Tack welding components to aid assembly in line with engineering drawings and quality standards. Working closely with other trades to ensure work is completed safely, accurately and to programme. Maintaining a safe working environment while adhering to all Health, Safety and Environmental procedures. Your skills and experience: Essential: Modern Apprenticeship certificate/Trade Papers (must be provided with your application). Relevant qualifications such as SVQ Level 3, City & Guilds, NVQ Level 3 or equivalent. Proven fabrication and plating experience within shipbuilding, heavy engineering, construction or manufacturing environments. Ability to read and interpret engineering and fabrication drawings. Experience operating fabrication equipment including oxy-fuel and/or plasma cutting equipment. Understanding of fabrication processes, structural assembly and tack welding techniques. Good understanding of SHE principles, COSHH and Risk Assessments. Comfortable working in confined spaces and at height.Requirements: Modern Apprenticeship/Trade Papers must be provided when submitting your application. Desirable: Previous marine or shipbuilding experience. Experience fabricating large steel structures. Current safety certifications such as Working at Height, Confined Space or SHE Induction. Experience working within the defence or heavy engineering sectors.Please ensure you attach copies of your Trade Papers and relevant qualifications when submitting your application. Overtime Pay: Monday - Thursday: Time and a Third (1.33x) Friday: Time and a Half for the first 4 hours, Double Time thereafter. Saturday: Time and a Half. Sunday: Double Time. Shift Patterns: Day Shift (Flat Rate) Monday - Thursday 07:00 - 16:30Night Shift (+33% Shift Allowance) Monday - Thursday 20:30 - 06:00Weekend Shift (+33% Shift Allowance) Friday - Sunday 07:00 - 19:30This is an excellent opportunity to join a long-term defence shipbuilding programme, offering stable work, competitive earnings, generous overtime opportunities and the chance to work on complex naval engineering projects alongside highly skilled tradespeople

PLATERS An excellent opportunity for skilled Platers to join a specialist engineering consultancy on a major industrial project in Scotland. Our client provides mechanical engineering, steelwork installation and industrial construction services to a range of highly regulated sectors across the UK. Due to continued project growth, they are seeking additional Platers to support a key installation project, with opportunities for ongoing work upon successful completion. This is an excellent opportunity for experienced Platers looking to secure long-term work on large-scale industrial projects with a well-established engineering contractor. PLATERS Scotland Hourly Rates: Basic: £23.25 Overtime A: £32.55 Overtime B: £41.84 IBA Payment: £2.37 per hour Allowances: Travel and Lodge allowances in line with the applicable industry agreement.Role: We are currently seeking experienced Platers to carry out the installation of structural support systems on a large industrial construction project. The successful candidates will be confident working from engineering drawings, setting out accurately and completing installations to strict tolerances while maintaining the highest standards of quality and safety. Key Responsibilities: Install structural steel support systems in accordance with engineering drawings. Read and interpret General Arrangement (GA) drawings. Set out and install work to specified tolerances. Work effectively as part of a site-based installation team. Adhere to all site health, safety and quality procedures. Complete work to a high standard within agreed project timescales.Qualifications & Experience: NVQ Level 3 in Plating or equivalent. Valid CCNSG, CSCS or recognised equivalent safety passport. Proven experience working from General Arrangement (GA) drawings. Experience setting out and installing steelwork to tight tolerances.Desirable: Experience using surveying equipment, including dumpy levels.Working Pattern: Minimum 100 hours worked over an 11-day rotation. Additional overtime available, with the opportunity to work in excess of 108 hours over the same period.Benefits: Competitive PAYE package with enhanced overtime rates. Industry travel and lodge allowances. Health and wellbeing support programme. Additional industry welfare benefits. Initial 6–8 week contract with the opportunity for continued work on future projects

An excellent opportunity has arisen for experienced CNC Operator/s to join a highly advanced manufacturing facility where you be expected to operate a range of CNC machining centres including turning, milling and grinding equipment producing bespoke components to exact specifications. Salary & Shift Options (please not that salaries include shift premium) £44.9k – Weekly rotating early & back shifts (6am–2pm / 2pm–10pm) £52.4k – Permanent night shift What’s in it for you Productivity bonus scheme Employer pension contributions up to 13% Life insurance 25 days holiday plus bank holidays Overtime opportunities at enhanced rates Permanent employment contract Key Responsibilities Read and interpret engineering drawings, process sheets and technical specifications Set up and operate CNC turning, milling and grinding machinery Download and manage CNC programs from DNC systems Select and install tooling for machining operations Calculate feeds and speeds for a range of materials including steel, aluminium, brass and bronze Edit and write CNC programs where required Carry out dimensional and visual quality inspections using precision measuring equipment Apply Lean Manufacturing principles to improve productivity and reduce setup times Prepare finished components for dispatch including cleaning, wrapping and packaging Ensure all completed components are correctly identified and meet quality standards Requirements Previous experience operating CNC machine tools within a precision engineering or manufacturing environment Ability to read and interpret engineering drawings Strong understanding of machining processes, tooling and inspection methods Experience working with a variety of metals and materials * Flexible approach to shift working This is an excellent opportunity to join a well-established engineering environment offering long-term stability, competitive earnings and strong employee benefits

Job post summary Date posted: 29 June 2026 Pay: £12.71-£13.00 per hour Job Description: A1 Jobs is looking for labourers for Glasgow and Coatbridge. Our client is a leading demolition company with construction sites across Scotland and the UK. This is a great time to join the team as they experience a period of growth. This is a temporary role with the high possibility of ongoing work. Your duties will be general site labouring, assisting the team in their trades. As a CSCS Labourer, your duties will include but are not limited to the following: Maintaining a clean and tidy site Assisting the team with trade duties General labouring As a CSCS labourer you must have the following: Valid CSCS card Appropriate PPE (steel toe capped footwear and hard hat) Physically fit and able to carry heavy loads. Previous experience as a site labourer. If this sounds like you, we’d love to hear from you. Please forward your CV Job Type: Temporary contract Salary: £12.71 to £13.00 per hour Schedule: Day shift Ability to commute/relocate: Coatbridge/ Glasgow: reliably commute or plan to relocate before starting work (required) Licence/Certification: CSCS card (required) Work Location: One location

We are a premier, well-established manufacturer of high-quality steel products with 40 years of industry excellence. As a trusted market leader in Scotland, we design, test, and manufacture steel communal entrance doors, steel windows, fire screens, and curtain walling. Quality craftsmanship and customer care sit at the heart of our operations. We consistently leverage cutting-edge manufacturing processes to remain at the forefront of the architectural metalwork sector. Benefits Competitive Salary: Highly attractive annual salary between £40,000 – £50,000. Workplace Flexibility: Hybrid and remote working options available for the right candidate. Specialist Exposure: Opportunity to work directly with elite, specialist steel façade systems. Sector Diversity: Varied and engaging workload spanning social housing, facility management (FM), and major construction sectors. Dynamic Environment: A highly collaborative, hands-on role working closely with clients, suppliers, and our internal fabrication teams. Long-Term Stability: Secure employment with a highly stable, forward-thinking industry leader. Responsibilities Estimating & Commercial Costing & Estimates: Prepare competitive, comprehensive cost estimates and quotations for steel doors, windows, fire screens, and curtain walling. Tender Review: Evaluate incoming tender documents, architectural plans, structural drawings, and client briefs to determine the project scope. Material Take-Offs: Proficiently utilize specialized software to map out material quantities, labor requirements, and pricing packages. Supply Chain Liaison: Collaborate with external vendors and subcontractors to source highly competitive trade quotes for materials. Risk Management: Identify project opportunities, exclusions, and risks, building necessary contingencies and value‑engineering options into final quotes. Project Handover: Support comprehensive tender submissions and facilitate smooth handovers to production teams. Design & Technical CAD Drafting: Prepare detailed façade and workshop fabrication drawings using AutoCAD. Detail Development: Develop precise technical details for curtain walling, windows, doors, and associated ironmongery. System Integration: Apply deep working knowledge of premium steel profile systems (including Schüco, Jansen, Forster, and RP Technik). Façade Principles: Apply core façade engineering principles, including structural loads, weathering, drainage, and thermal performance. Cross-Department Synergy: Partner closely with internal fabrication and manufacturing teams to evaluate technical feasibility and support design approvals. Requirements & Qualifications Experience: 5–10 years of dedicated façade experience (focused on design, estimating, or a blend of both) with at least 3+ years specifically in steel doors, fire screens, curtain walling, or steel window manufacturing. Software Expertise: Proven, hands-on proficiency using SchüCal (Schuekal) or LogiKal estimating software is strictly essential. High competency in AutoCAD is required. Industry Knowledge: Solid understanding of steel fabrication techniques, architectural metalwork, site installation processes, and strong Excel skills. Technical Standards: Working knowledge of CWCT guidelines, BS/EN standards, and UK Building Regulations. Core Skills: Strong numeracy, exceptional commercial awareness, highly organized record-keeping, and excellent communication skills

Welders Needed Are you a skilled Welder looking to join a world-class construction environment? We are seeking experienced professionals who take pride in delivering high-quality workmanship and contributing to the construction of cutting-edge vessels. What You'll Be Doing As a Welder, you will be responsible for fabricating, assembling and installing ship components while ensuring the highest standards of quality, safety and productivity. Key responsibilities include: Welding carbon steel, stainless steel and aluminium structures using a variety of welding processes: Manual Metal Arc (MMA) MIG Welding Automatic & Semi-Automatic Welding (Submerged Arc & KAT) Resistance Welding (Stud Welding)Working from welding procedures, manufacturing instructions and technical drawings Producing high-quality, right-first-time work that contributes to successful ship construction Using air and electric power tools safely and effectively Collaborating with supervisors, apprentices and other trades to overcome production challenges Essential Requirements ? Proven FCAW (Flux Core Arc Welding) experience - essential ? Ability to weld in multiple positions using a variety of consumables ? Valid welding qualifications and trade papers ? Strong understanding of: Safe working practices Welding procedures Manufacturing processes Quality standards and tolerances? Relevant safety certifications such as: IOSH Working Safely Confined Space Working at HeightWhat We're Looking For We want team players who are: Reliable and committed Quality-focused Strong communicators Practical problem solvers Willing to learn and adapt Passionate about sharing knowledge with apprentices and colleaguesWhy Join Us? You'll become part of a highly skilled team delivering complex engineering projects while developing your expertise in advanced welding techniques, shipbuilding processes and industry-leading quality standards. If you're an experienced FCAW Welder looking for your next challenge, we'd love to hear from you. Apply today or contact us for more information. #WeldingJobs #Welder #FCAW #Shipbuilding #MarineEngineering #ManufacturingJobs #SkilledTrades #EngineeringCareers #Hiring #TradeJobs #UKJobs #ProductionJobs

Role: Industrial and Automatic Door Engineer Location: Scotland Salary: Up to £21ph DOE Shift: Monday – Friday (40 hours) Overtime: Offered at 1.5x On Call: Offered but not mandatory My client, a respected independent specialist in Industrial and Automatic Door Systems, is looking to recruit a skilled and motivated Industrial and Automatic Door Engineer. This is a permanent, field-based role offering consistent work, a local patch, and the opportunity to expand your technical knowledge. As an Industrial and Automatic Door Engineer you will be responsible for You will be working remotely from home as there will be no local depot You will be covering reactive call outs, PPMs, further works and installs from start to finish includes wiring and commissioning on a range of Industrial doors, roller shutters, sectional shutters, entrance doors and steel fire exits, auto doors Deliver safe and compliant work in line with industry standards The successful Industrial and Automatic Door Engineer will have the following experience Sectional doors – lead engineer who can install, carry out repairs, change springs, cable breaks, motors and competent with GFA panels and can wire and commission an install. Roller shutters - lead engineer who can install, carry out repairs, wire and commission Steel doors and Aluminium doors – survey, carry out repairs, install new Auto doors – fault find and repairs, changing motors, belts and panels The Industrial and Automatic Door Engineer will receive an excellent remuneration package which includes Competitive salary based on experience Door-to-door travel paid Company van and tools provided Enhanced overtime rates 20 days holiday + Bank holidays Pension scheme and employee benefits If you don’t meet every requirement but have relevant mechanical or electrical skills, we’d still love to hear from you. There may be other opportunities that suit your experience. Apply today or give Anja at Kemp Recruitment a call on (phone number removed) for a friendly, confidential chat about roles in your area. INDAT

Job Title: Pipefitter Location: Glasgow Salary: £40,016.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried outYour skills and experiences: Essential: Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE, COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environmentDesirable: Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe WeldingOvertime Pay: Mon - Thurs - 1.33 (Time and a 3rd) Friday - Time and a half for the first 4 hours, and double time for anything thereafter Saturday - Time and a half Sunday - Double time Shift Patterns: Night Shift - 33% Rate Weekend Shift - 33% Rate Day shift - Flat RateDayshift, Monday - Thursday, (Apply online only) Nightshift, Monday - Thursday, (Apply online only) Weekend Shift, Friday - Sunday, (Apply online only)

Our client is looking for mechancial fitters To install, maintain, repair, and refurbish,pipework, mechanical plant and equipment within the water and wastewater industry. The Mechanical Engineer / Fitter will ensure works are carried out safely, efficiently, and to the required quality standards, in compliance with WIMES (Water Industry Mechanical and Electrical Specifications), client specifications, and health and safety regulations. Job Responsibilities • Install, align, and commission mechanical plant and equipment, including pumps, pipework, valves, actuators, and associated systems. • Carry out pipework installation in a range of materials and sizes, including Ductile Iron, Stainless Steel, Carbon Steel, UPVC, and ABS. • Undertake pipe fitting, fabrication, and assembly in accordance with drawings and specifications. • Perform planned maintenance, breakdown repairs, and refurbishment of mechanical assets. • Conduct mechanical fault-finding, diagnostics, and corrective actions. • Read and interpret technical drawings, specifications, and method statements. • Ensure compliance with all Health, Safety, and Environmental requirements, including safe use of lifting/handling equipment. • Complete job records, maintenance reports, and compliance documentation. • Liaise with supervisors, engineers, and client representatives to support project delivery. • Contribute to quality control and handover documentation. No role profile can cover every issue which may arise within the post at various times. The post holder is expected to carry out other duties from time to time, which are broadly consistent with those described. Additional Information • Flexibility to travel to sites across Scotland • Willingness to undertake overnight stays as required by project needs. • Ability to work as a teams in varied and challenging site environments. Person Attributes Knowledge and Skills required Technical Knowledge · Sound understanding of mechanical engineering principles, including hydraulics, pneumatics, and rotating equipment. · In-depth knowledge of water and wastewater treatment processes and associated mechanical systems. · Familiarity with pumps, motors, gearboxes, valves, pipework, compressors, screens, and mechanical treatment equipment. · Ability to interpret engineering drawings, schematics, P&IDs, manuals, and technical specifications. · Knowledge of condition monitoring techniques, fault diagnosis, and asset maintenance strategies. · Understanding of relevant standards, codes of practice, and regulatory requirements within the water industry. Practical & Maintenance Skills · Proven ability to carry out installation, commissioning, servicing, and repair of mechanical equipment. · Competence in alignment, balancing, bearing replacement, seal replacement, and pump overhauls. · Experience with preventative, corrective, and breakdown maintenance in operational environments. · Skilled in the use of hand tools, power tools, lifting equipment, and workshop machinery. · Ability to isolate, dismantle, reassemble, and test mechanical plant safely and effectively. Safety, Compliance & Quality · Strong knowledge of health, safety, and environmental regulations, including confined space entry, permit-to-work systems, and lock-out/tag-out procedures. · Awareness of risk assessments, method statements (RAMS), and safe systems of work. · Commitment to quality workmanship, asset protection, and environmental responsibility. Problem-Solving & Communication · Strong fault-finding and troubleshooting skills, with the ability to work under pressure and minimise downtime. · Effective communication skills to liaise with operations staff, engineers, supervisors, and contractors. · Ability to accurately complete maintenance records, reports, and compliance documentation. Personal Attributes · Self-motivated with the ability to work independently or as part of a team. · Flexible and responsive to operational priorities, including call-outs and emergency work. · Continuous improvement mindset with a willingness to undertake training and develop skills. Experience required 2 Years + in the water industry or similar type industry Essential Qualifications · Recognised Mechanical Apprenticeship, NVQ Level 3 in Mechanical Engineering, or equivalent qualification. · Proven experience in mechanical installation, maintenance, and refurbishment within the water industry or heavy industrial sector. · Demonstrable competence in pipework installation across ductile iron, stainless steel, carbon steel, UPVC, and ABS materials · Knowledge of pumps, valves, rotating equipment, and mechanical systems. · Ability to read and interpret engineering drawings and specifications. · Competence in using hand tools, power tools, and pipework installation/fitting equipment. · Full UK driving licence. Desirable Qualifications · EUSR Water Hygiene card. · Confined space training. · SSSTS or equivalent site supervisory training. · Experience with welding, hot works, and advanced pipefitting techniques. · Knowledge of condition monitoring techniques (e.g., vibration analysis, laser alignment). · Familiarity with client-specific specifications and WIMES compliance

Job Title: Pipefitter Salary: £40,016 per annum + shift allowance + overtime Location: Glasgow We currently have a vacancy to join one of the world’s leading, global defence, security and aerospace companies as a Pipefitter. The role will be based in Glasgow and will require the successful candidate to be on site full time working a varied shift pattern (please see details below). The company works at the cutting edge of technology, creating more than 100 new inventions every year for customers in over 100 countries. They are looking for a skilled and experienced Pipefitter to join their team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. There are 3 shifts available (although the successful candidate would start on a day shift and would then discuss with their manager if they would prefer a different shift) and the hours of work within each shift are highlighted below. Please note that both the night shift and the weekend shift will include a 33% shift allowance on top of the basic rate. Day Shift: Monday- Thursday 7.00am- 4.30pm Night Shift: Monday- Thursday 8.30pm- 6.00am Weekend Shift: Friday- Sunday 7am- 7.30pm Overtime is also available- please see rates of pay below in the ‘Benefits’ section. All successful candidates will be required to attend a Trade test which will be held in Glasgow in October 2025. You will also be required to submit your trade certificates after an initial phone call with our recruiter. Main Responsibilities: - Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, CuNi, carbon steel and stainless steel) - Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. - Installing utilities aboard ship i.e. sinks, showers, and toilets - Install and assemble fittings, valves, and related components according to drawings and specifications. - Collaborate with other trades to ensure the timely and accurate completion of projects. - Adhere to safety regulations and company procedures at all times - Maintain accurate records of work carried out Benefits: Shift allowance of 33% on both night and weekend shifts Overtime Pay rates are as follows: Monday- Thursday: 1.33 (Time and a 3rd) Friday: 1.5 (Time and a half for the first 4 hours and 2.00 (Double time) for any hours thereafter Saturday: 1.5 (Time and a half) Sunday: 2.00 (Double time) Enhanced Pension scheme- up to 14% combined Flexible working pattern including working from home/ flexible start and finish times 25 holiday days plus bank holidays- 26 days after 5 years’ service/ 27 days after 10 years’ service Shared Incentive Plan Employee Assistance Programme Cycle to Work Scheme Life Assurance (you and your spouse/ partner)- 6 x salary * Ill Health Income Protection/ Private Medical Insurance- 50% of salary About You: Essential: - Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) - Current knowledge and experience of pipe manufacture, installation, and use of associated equipment - Strong knowledge of pipefitting techniques, tools, and safety standards - Ability to read and interpret engineering drawings and technical specifications - Clear understanding of SHE, COSHH and Risk Assessments - Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable: - Marine Pipefitting Experience - Experience in industrial or commercial settings preferred - Understanding of manufacturing processes - Experience in TIG Pipe - Welding You must be eligible to apply for SC clearance and, therefore, must hold a British passport and have lived and worked in the UK for the past 5 years About Aeropeople: Whether you’re looking for your next job or searching out the next superstar to join your team… Aeropeople’s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses. During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period. For the latest news, events and jobs please search ‘Aeropeople Ltd’ on LinkedIn and Facebook for our latest jobs

GS3 Recruitment are currently looking for a number of Heating Engineers across the Central Belt of Scotland for work in the below areas. Glasgow: Various commercial projects in the city centre plus work on the outskirts with parking available. Work here till the end of Summer £27p/h with potential weekend work also on an enhanced rate Variety of work involving screwed steel fittings Edinburgh: Large new build commercial project in the Mid Lothian with parking available Screwed Mild Steel Pipe and Fittings and Victaulic Fittings £27p/h - potential of OT in the near future work lasting for the next 4 weeks minimum Must have in date CSCS card & 2x recent references If interested in any of the above please contact (email address removed) on (phone number removed) & send through an up to date CV. We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of age, disability, gender reassignment, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex or sexual orientation

Job Title: Heating Engineer (Mechanical Installs) Location: Glasgow Base Salary: Up to £44,000.00 per annum (depending on experience) Benefits: Company Vehicle with Fuel Card (work use only), Company pension scheme, 33 days holiday (including bank holidays), Life Assurance, Bonus potential Hours: 40 hours a week – Monday to Friday | 8.00am – 4.30pm Our client, a national leader in the M&E and FM space, are seeking a Heating Engineer to install mechanical systems in plant/boiler rooms, as well as minor works. The ideal candidate will have experience with welding, live boilers & central heating systems and pipework. Job Purpose Our client are seeking a Mechanical fitter/Heating engineer primary responsibility will be working as part of team of in house fitters installing various mechanical systems including full plantroom fit outs and various minor works. The successful candidate will report directly to the Commercial Manager and play a key role in shaping the projects department to achieve fit out tasks. Key Accountabilities Installation of commercial heating, plumbing and chilled water systems New installations and maintenance across commercial plant and pipework systems Experience working with live boilers and central heating systems, as well as pipework. Understanding of the working and operation of plumbing and heating systems Working off own initiative/Running own jobs as part of small team Experience working on steam systems advantageous but not essential. Fitting types worked with - Press fit, Victaulic, Screwed, Brazed, Soldered, Welded, etc MI Steel, Stainless steel Galvanised steel, Copper etc Experience Required NVQ Level 3 (or equivalent) Heating & Ventilation. Welding experience would be prefered Qualification in Mechanical Engineering or related discipline. Proven experience in Plantroom and Boilerhouse installations. Commercial Gas qualifications advantageous – Testing & Purging Welding – Arc & Gas welding To apply for this role please submit your full and up to date CV to Andrew Bridges at PDA SEARCH & SELECTION LIMITED

\n Morgan Hunt are working with a UK wide consultancy to recruit an experienced Structural Technician to join their Glasgow team. This role gives you the chance to work on a portfolio of projects across the residential, commercial, retail, hospitality, education, and public sectors. \n Working alongside structural engineers and multidisciplinary design teams, you will play a key role in the production and coordination of high-quality technical drawings and BIM models from concept through to construction. \n The successful candidate will have a strong technical background, excellent attention to detail, and experience delivering structural drawings for a variety of building structures projects. \n \n Key Responsibilities: \n \n • Produce accurate structural drawings and 3D models for a range of building projects using Revit and AutoCAD\n, • Develop General Arrangement (GA) drawings, detailed construction drawings, schedules, and reinforcement layouts where required\n, • Coordinate structural models with architectural, civil, and MEP disciplines using BIM workflows\n, • Assist engineers in the preparation of technical information for planning, tender, and construction stages\n, • Ensure drawings comply with current industry standards, company procedures, and project requirements\n, • Carry out drawing revisions and respond to technical comments throughout project delivery\n, • Support the continuous development of BIM standards and drawing quality within the team\n, • Assist with mentoring junior technicians where appropriate\n \n \n Requirements: \n \n • HNC/HND or equivalent qualification in Civil Engineering, Construction, or a related discipline\n, • Experience as a Structural Technician within a structural engineering consultancy\n, • Proven experience producing drawings for building structures projects\n, • Strong proficiency in Revit and AutoCAD\n, • Good understanding of structural detailing in steel, reinforced concrete, masonry, and timber\n, • Experience coordinating models within a BIM environment\n, • Knowledge of UK construction standards and engineering drawing practices\n, • Excellent communication and organisational skills\n, • Ability to manage workload across multiple projects while meeting deadlines\n, • Experience working on residential, retail, hotel, commercial projects\n, • Familiarity with Navisworks and BIM collaboration platforms\n, • Knowledge of reinforced concrete detailing software\n \n \n Benefits: \n \n • Competitive salary\n, • Flexible and hybrid working\n, • Pension scheme\n, • Generous annual leave entitlement\n, • Training and professional development\n, • Opportunities to work on a varied portfolio of building structures projects\n \n \n Please get in touch for further information. \n Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role. \n

\n Morgan Hunt are working with a UK wide consultancy to recruit a Structural Engineer to join their Building Structures team in Glasgow. This is an excellent opportunity for an ambitious engineer with around two years' post-graduate experience to develop their career within a well established engineering consultancy. You will work on a portfolio of building structures projects across the residential, commercial and retail sectors, supporting the design and delivery of projects from concept through to construction. Working alongside experienced engineers and multidisciplinary teams, you will gain exposure to all stages of project delivery while continuing to develop your technical and professional skills. \n Key Responsibilities: \n \n • Assist in the design and delivery of structural engineering projects from feasibility through to construction.\n, • Undertake structural analysis and design for a variety of building structures using steel, reinforced concrete, masonry and timber.\n, • Prepare structural calculations, technical reports and design specifications.\n, • Work closely with Structural Technicians to develop coordinated drawings and BIM models.\n, • Attend design team meetings and undertake site visits and inspections as required.\n, • Ensure designs comply with current UK Building Regulations, Eurocodes and relevant industry standards.\n, • Manage your workload effectively across multiple projects while meeting programme and quality requirements.\n, • Continue to develop technical knowledge and work towards professional chartership.\n \n \n Key Requirements: \n \n • BEng or MEng in Civil or Structural Engineering.\n, • Experience working on building structures projects.\n, • Good understanding of structural design principles for steel, reinforced concrete, masonry and timber.\n, • Familiarity with structural analysis and design software such as Tekla Structural Designer, Tedds, Robot Structural Analysis or similar.\n, • Knowledge of UK Building Regulations and Eurocodes.\n, • Ability to work effectively as part of a multidisciplinary team.\n, • Well organised with excellent attention to detail.\n, • Experience delivering residential, commercial and retail developments.\n, • Working towards Incorporated Engineer (IEng) or Chartered Engineer (CEng) status\n \n \n Benefits: \n \n • Competitive salary and benefits package\n, • Flexible and hybrid working arrangements\n, • Pension scheme\n, • Generous annual leave entitlement\n, • Structured training and mentoring from experienced engineers\n, • Full support towards ICE or IStructE chartership\n, • Opportunities to work on a wide variety of projects\n \n \n Please get in touch for further information. \n Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role. \n

Project Manager – Power & Substations Location: UK Wide (Travel Required) Salary: £50,000 – £54,000 per annum (Depending on Experience) The Opportunity An exciting opportunity has arisen for an experienced Project Manager to join a growing contractor specialising in the Power & Substations sector, delivering projects throughout the UK. Operating within the Transmission & Distribution industry, the business provides a complete in-house solution encompassing design, manufacture, fabrication, mechanical installation and project delivery for electrical substations and associated infrastructure. Their expertise includes structural steelwork, primary plant installation, above and below ground earthing, and complete substation construction packages. This role offers genuine long-term career prospects with a business experiencing significant growth within the UK power infrastructure market. The Role As Project Manager, you'll be responsible for managing multiple Power & Substation projects across the UK, ensuring works are delivered safely, on programme, within budget and to the highest quality standards. Working closely with Directors, Site Managers, Engineers, clients and subcontractors, you'll oversee projects from initial planning through to commissioning and final handover. The position will involve regular travel throughout the UK, with accommodation and expenses provided where required. Key Responsibilities - Manage the successful delivery of Power & Substation projects nationwide. - Oversee project delivery from pre-construction through to commissioning and handover. - Coordinate Site Managers, Engineers, subcontractors and specialist installation teams. - Manage project programmes, labour allocation, plant and material procurement. - Ensure projects are delivered safely, on time and within budget. - Liaise directly with clients and attend regular progress meetings. - Monitor commercial performance alongside the commercial team. - Review technical drawings, specifications and construction programmes. - Ensure compliance with all Health & Safety legislation and company procedures. - Produce project reports and maintain accurate site documentation. - Support testing, commissioning and project close-out activities. - Build long-term relationships with clients and identify opportunities for repeat business. About You We're looking for an experienced Project Manager with a background delivering projects within the Power, Utilities, Electrical Infrastructure or Transmission & Distribution sectors. You'll be confident managing multiple stakeholders, commercially aware and capable of delivering technically challenging projects across the UK. Essential Experience Previous experience as a Project Manager within construction or utilities. Background delivering electrical infrastructure, power or substation projects. Strong programme and resource management skills. Experience managing subcontractors and direct labour. Commercial awareness and budget management. Excellent client-facing and communication skills. Ability to interpret technical drawings and specifications. Strong Health & Safety knowledge. Full UK Driving Licence. Willingness to travel throughout the UK. Desirable Experience National Grid or DNO project experience. High Voltage or Substation construction experience. Structural steel, mechanical installation or electrical infrastructure knowledge. Transmission & Distribution sector experience. What's on Offer? £50,000 – £54,000 basic salary (depending on experience). OT at 1.33x for hours over 8 Mon-Fri OT at 1.5x for Saturdays OT at 2x for Sundays (providing 8 hours has been worked on the Saturday) Door-to-door travel paid. Company pool vehicle and fuel card. £30 per night overnight allowance. Company phone, laptop and tablet. Company credit card for business expenses and accommodation. Company pension scheme. 28 days annual leave including Bank Holidays. Annual Christmas shutdown. All required industry training and qualifications funded. Genuine long-term career progression within a rapidly expanding business operating across the UK's Power & Substations sector. Apply Now If you're an experienced Project Manager looking to build a long-term career delivering major Power & Substation projects across the UK, we'd love to hear from you. Apply today with your CV for a confidential discussion

Mechanical Engineer – Energy from WasteExcellent salary + bonus + private medical + pensionGlasgow, ScotlandSCINERGY Recruitment are recruiting a Mechanical Engineer to join an established Energy from Waste plant in Glasgow. Working alongside the Electrical and C&I Engineers, you will lead mechanical engineering and maintenance activities to maximise plant availability, protect asset value and support the site's safety, environmental and financial targets.Roles and ResponsibilitiesLeading and supporting the site's Mechanical TechniciansPlanning and delivering preventative, planned and reactive maintenanceFault-finding and maintenance across pumps, valves, gearboxes, compressors and conveyorsManaging statutory inspections and compliance with PSSR, LOLER and PUWERSupporting planned outages, shutdowns and plant improvement projectsMaintaining accurate records through the CMMSManaging contractors, site stores and the mechanical workshopWorking closely with operations, electrical and C&I teamsExperience and QualificationsMechanical engineering apprenticeship with an HNC/HND or equivalentMaintenance / engineering experience within heavy process environments – power generation, steel making, petrochemical, refining etcPrevious supervisory or team leadership experienceStrong knowledge of industrial mechanical plant and maintenance practicesExperience using a CMMS and working within relevant safety legislationWhat's on Offer?Excellent basic salary depending on experienceAnnual bonusPrivate medical coverCompany pensionThe chance to join the growing EFW industryFor further information or to apply please contact Steve at SCINERGY Recruitment on 02030 386 115 or emailTPBN1_UKTJ

MIG Welder Fabricator – Earn £1,000+ Per Week – Hamilton Benefits: Pay: Competitive hourly rates up to £18. Experience & Requirements: Proven background as a MIG Welder Fabricator in heavy engineering or structural steel.

Job: Welder Location: Govan/Scotstoun (Glasgow), United Kingdom Salary & Shifts: Range of payrates based on shift patterns, full breakdown below Contract length: 10 months (extensions available) Contracted hours: 37 hours (overtime available) Rate card: Available on request Morson are partnered up with a prestigious defence client (leader in the Defence and Security sector) in search for time served Welders. You’ll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. What is expected from me? As a qualified Welder you will have an important role within the business to stay professional throughout your contract delivering to the highest standard ensuring Safety, Health and Environmental regulations are followed. Job Description - Welding different materials (carbon & stainless steel & aluminium) - Welding using different welding processes i.e., Manual Metal Arc, Metal Active Gas, Metal Inert Gas, Automatic & Semi-Automatic Machine Welding (Submerged – Arc & KAT) & Resistance Welding (Stud Welding) - Welding butts and fillets to a high standard - Main process – FCAW / MAG – using ceramic tiles Requirements - Qualifications & Compliance: Holds a full Engineering Modern Apprenticeship, trade papers. - Flux core arc welding experience - Know...

Steel Fitter / Steel Erector / Fabricator Permanent and Contract Temp-to-Perm Opportunities Available Global Recruitment has excellent opportunities for experienced Steel Fabricators / Fitters / Erectors to join our clients highly skilled team. We are currently recruiting for both: • Straight Permanent PAYE positions £19.00 per hour, • Contract Temp-to-Perm positions £25.00 per hour CIS Both opportunities offer long-term work, with the potential for career progression and ongoing opportunities across multiple UK sites. The initial project will be based in Dalry, with future work available across the UK. Salary & BenefitsStraight Permanent PAYE Position • £19.00 per hour PAYE, • Overtime paid at time and a half after 39 hours, • £120 monthly overtime bonus qualify by working 32 hours of overtime over a four-week period, • Holiday pay equivalent to £25£30 per hour, • 30 days holiday, • 3% pension contribution on total earnings, • £150 annual attendance bonus paid in your first January wage if you have fewer than 3 days absence during the year, • Rates and job roles are under constant review, with opportunities f...

Our client is a well-established and highly respected structural steel contractor, delivering major building, infrastructure and industrial projects across the UK. Due to continued growth, they are seeking an experienced Quantity Surveyor to join their commercial team and support the successful delivery of large-scale steelwork and construction projects. This role offers an excellent opportunity for a commercially driven professional to take ownership of cost control, contract administration and financial reporting, working closely with project managers, clients and subcontractors to ensure projects are delivered efficiently and profitably. The successful candidate will manage valuations, variations, procurement and commercial documentation, providing clear commercial guidance throughout the project lifecycle. Quantity Surveyor - Position Remuneration • Competitive salary depending on experience, • Long-term career progression within a growing structural steel contractor, • Supportive commercial team with strong internal collaboration, • Exposure to major UK projects across construction and steelwork, • 30 days annual leave plus private medical insurance with cinema, entertainment and gym discounts Quantity Surveyor - Position Overview • Support commercial delivery of large-scale structural steel and construction projects, • Manage project costs from tender through to final account, • Handle valuations and variations and prepare applications for payment, • Review and administer contracts to ensure compliance, • Liaise with project teams to resolve commercial queries, • Prepare commercial documentation including cost reports and forecasts, • Provide commercial guidance throughout the project lifecycle, • Support long-term business growth within a reputable contractor Quantity Surveyor - Position Requirements • Proven Quantity Surveyor experience within construction or steelwork, • Strong understanding of commercial processes and cost control, • Ability to manage valuations, variations and financial reporting, • Experience reviewing contracts and ensuring compliance, • Competence in procurement and subcontractor engagement, • Excellent communication skills with clients and internal teams, • Strong analytical ability and attention to detail, • Ability to work independently within a collaborative team, • Proficiency with industry software including MS Office, • Full UK driving licence and willingness to travel Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application. JBRP1_UKTJ

Steel Fitter / Steel Erector / Fabricator Permanent and Contract Temp-to-Perm Opportunities Available Global Recruitment has excellent opportunities for experienced Steel Fabricators / Fitters / Erectors to join our clients highly skilled team. We are currently recruiting for both: Straight Permanent PAYE positions £19.00 per hour Contract Temp-to-Perm positions £25.00 per hour CIS Both opportunities offer long-term work, with the potential for career progression and ongoing opportunities across multiple UK sites. The initial project will be based in Dalry , with future work available across the UK. Salary & Benefits Straight Permanent PAYE Position £19.00 per hour PAYE Overtime paid at time and a half after 39 hours £120 monthly overtime bonus qualify by working 32 hours of overtime over a four-week period Holiday pay equivalent to £25£30 per hour 30 days holiday 3% pension contribution on total earnings £150 annual attendance bonus paid in your first January wage if you have fewer than 3 days absence during the year Rates and job roles are under constant review, with opportunities for progression Contract Temp-to-Perm Position £25.00 per hour CIS Overtime paid at time and a half Opportunity to move into a permanent position The Role The successful candidate will be an experienced Steel Fitter / Fabricator with a strong background in architectural and structural steelwork . You must be confident working to a high standard across all aspects of fitting, fabrication and welding , both in a workshop environment and on customer premises. Requirements Proven experience in steel fitting, fabrication and welding Experience fabricating both architectural and structural steelwork Strong ability to read and work from engineering drawings Ability to work independently and use your own initiative Excellent communication skills A positive attitude and flexible approach to engineering work and working hours Valid CSCS Card essential IPAF preferred Supervisory or leadership experience would be an advantage, but is not essential To apply, please submit your CV directly. TPBN1_UKTJ

Are you an experienced Site Fitter itching to work on industrial-scale plant installations? Join our high-performing team delivering cutting-edge storage, transfer, batching, and heat-processing equipment, including steel fabrication, bespoke process heaters, and civil-grade engineering, across sect

Seeking a Technical Sales or Business Development professional with steel industry and Purlin/Mezzanine floor experience for a market-leading company.

Fabricates and installs pipework systems using various materials, including copper, steel, and stainless steel, for shipbuilding projects.

Job Title: HGV Welder / Fabricator Location: Glasgow Salary: £42,494 – £45,396 DOE Shift Pattern: • Weeks 1 & 2: Monday – Thursday | 7am – 7pm - Weeks 3 & 4: Wednesday – Saturday | 7am – 7pm About Your New Company This is a rare opportunity to join one of Scotland’s most established and respected independent HGV maintenance organisations. With over 60 years of industry experience, multiple depots nationwide, and a reputation as a leader in bulk transport, this business continues to set the standard in fleet investment, engineering excellence, and working conditions. Their operation includes a modern fleet of over 160 vehicles, 500+ trailers and tankers, supported by continuous investment in facilities, tooling, and staff development. Due to sustained growth and continued success, they are now expanding their engineering team and seeking a skilled HGV Welder / Fabricator to join their Glasgow depot. About the HGV Welder / Fabricator Role This is a hands-on, workshop-based role focused on high-quality fabrication and structural welding within a commercial vehicle maintenance and refurbishment environment. You will be responsible for: • Welding and fabrication of commercial vehicle bodies and chassis - Structural repair and refurbishment work - Fabrication of steel components for trucks, trailers, and tankers - Working from engineering drawings to produce accurate builds - Ensuring high standards of safety, quality, and workmanship What We’re Looking For The successful HGV Welder / Fabricator will have: • Proven experience in medium to heavy steel fabrication and welding (2mm – 10mm) - Ability to build, tack, and fully weld fabrications from drawings - Strong fault-finding ability with attention to detail in fabricated structures - Confident reading and interpreting engineering drawings - Experience working on trucks, trailers, and commercial vehicles - A professional, safety-focused, and quality-driven approach to work What You’ll Receive • Competitive basic salary of £42,494 – £45,396 - Attractive pension scheme - Structured performance-based development and support - Cycle to work scheme - Long-term job security with a stable, growing employer - Investment in tools, training, and working conditions Next Steps If you are an experienced HGV Welder / Fabricator looking to join one of Scotland’s leading commercial vehicle engineering organisations, apply directly via this advert. INDCG

Steel Fitter / Steel Erector / Fabricator Permanent and Contract Temp-to-Perm Opportunities Available Global Recruitment has excellent opportunities for experienced Steel Fabricators / Fitters / Erectors to join our client’s highly skilled team.

West Midlands' leading structural steelwork contractors and fabricators. Renowned for delivering high-quality structural steel solutions across a range of sectors, the company offers a stable, long-term career within a well-established and growing business.

Overtime Are you an experienced Structural Steel Fabricator looking to work on large, challenging fabrication projects? Global Recruitment is recruiting skilled Structural Steel Fabricators / Platers to join one of Scotland's leading heavy engineering and structural steel fabrication workshops i

Quantity Surveyor (Structural Steel).

BlueSteps Connect is seeking a Head of Stainless Steel to lead its global stainless-steel trading activities from the United Kingdom.

Fabricates stainless steel components and systems for various industries, including welding and using fabrication equipment, based on engineering drawings.

Experienced Stainless & Carbon Steel Fabricator needed for workshop and site work.

Field sales position selling a high quality manufactured range of steel roofing & cladding supplies & associated services such as;. The ideal applicant will be an Business Development Manager Steel Roofing & Cladding with:. Mitchell Maguire is a specialist Construction Field Sales Recruitment Consul

Seeking a MIG Mild Steel Welder/Fabricator for a full-time position.

Undertake normally as part of a team, the cleaning of a designated area within school/ council premises to ensure that they are kept in a clean and hygienic condition.If you apply for this post, please ensure your email provider accepts emails from noreply@myjobscotland.Myjobscotland as a safe sende

Connect Appointments are recruiting.This is a fantastic opportunity to work in a modern, fast-paced environment, with the potential of permanent employment for the right candidate.Monday to Thursday, 4pm/5pm starts.Working as a Production Operative, your duties will include:.Operating and cleaning a