Trabajos lifting en DundeeCrear alertas

GEV Wind Power is seeking experienced Blade Repair Technicians to support internal blade inspections and composite repair projects on SGRE wind turbines at onshore wind farms throughout the United States. This role requires extensive travel and offers the opportunity to work on a variety of projects while maintaining the highest standards of safety, quality, and workmanship. Location: 100% travel throughout the USA Job Type: Contract Job Responsibilities: Travel 100% on a rotational basis to wind farms throughout the U.S. - cross country travel by air or truck Perform composite blade repair up-tower via platforms, rope access and/or occasionally on the ground Epoxy and Polyester resin wet layup Vacuum infusion Balsa and foam sandwich materials Structural repair Completing detailed Daily Progress Reporting Documents and QAQC reports Completing onsite stock checks Assisting site lead and project coordinator as applicable We are looking for strong, reliable technicians with the following skillset and training: 2+ years of Composite repair experience Platform and/or rope access experience Knowledge of fiberglass reinforcement and structural repair methods. Ability to safely and properly use powered hand tools. Good finger dexterity, including precise use of hand and power tools Understanding of repair specifications Ability to read and interpret complex technical drawings and processes. IT literate, including email, internet, and iPad usage. Ability to work well in a team, take guidance, and provide leadership when required. Flexibility to adapt to changes in scope and work assignments. Physically capable of meeting strenuous job requirements, including climbing ladders and scaffolding, bending, crawling, stooping, and lifting up to 75 pounds. Ability to wear a respirator and work safely with protective equipment Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment. Valid driver’s license, good MVR report, and must be 21 years of age or older to drive a company vehicle. Must successfully pass a criminal background check and maintain a drug-free status. To be considered for this role, candidates will need the following certifications: GWO BST (Basic Safety Training) – fire awareness, working at heights, manual handling, first aid GWO ART (Advanced Rescue Training Hub/Nacelle) GWO Slinger Signaller or Siemens Rigging Safety GWO Blade Repair or Advanced Blade Repair from any of the approved providers: AmuSyd, Team 1, Blade Repair Academy or Green SGBTCF Blade Technician Profile Spot Paint certification OSHA 10 General Industry (preferred; assistance available to obtain certification) EHS Regional Compliance (preferred; assistance available to obtain certification) Rigging Safety SGRE Blade C or Blade D certification (preferred but not required) What are the perks of working with GEV Wind Power? Upskilling trusted GEV technicians via GEV Academy Bespoke reporting system (time saving with training provided) Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform We listen to our technicians needs and value their feedback (consistent technician feedback surveys) Ongoing work for our top talent A little bit about us: A Career Enabling You to Make a Global Impact! You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources. At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity. Your application has been successfully submitted! _ We appreciate your interest in this position. Unfortunately, you have already applied for this job.

Business Development Manager - Inspection and Compliance Software Basic salary up to £45,000, OTE £70,000 + great benefits Home based covering Scotland, Ireland and the North East of England My client is a successful provider of software for inspection and compliance across a number of different industry sectors including oil and gas, renewables, lifting equipment and much, much more. They are currently looking for a sales professional to join the team to cover the northern region, working remotely from home. We're looking for someone with experience in inspections, either hands on, or selling services or solutions, or even just with knowledge from working within a business where this is really prevalent. If this sounds like you and you're looking for a new challenge then we'd love to hear from you! The Role: • This is a proactive sales role, selling inspection and compliance software into a range of different industries., • It's a mix of new business generation and account management (50/50) covering Scotland, Ireland and the North East of England., • You'll generate your own leads but with some additional support from a marketing team, • Working from home, you'll be able to engage with customers both through teams and from face to face meetings., • You'll also identify and target existing client growth opportunities to maximise sales revenue and wallet share., • You'll also attend trade shows and regional networking meetings to ensure maximum exposure of the business and yourself to increase engagement and brand awareness. The Person: • We're looking for someone who has a knowledge or hands on experience of industrial inspections within any technical sector. This could be from selling inspection services or software to hands on inspections or just a good knowledge from a working environment., • Strong sales experience is essential as this will be a full 360 sales role covering both new and existing customers, • Software sales experience isn't essential, we'd prefer someone with an understanding of our customer sectors and pain points., • Great communication and presentation skills are needed and experience using and recording information on a CRM system or similar are also required., • You'll be driven, able to work autonomously and be motivated to work to targets but with the ability to identify and engage new markets., • There will be some travel involved so you need a full UK driving license and we'd really like you to be based in Scotland or North East England rather than Ireland. The Package: • A basic salary of £35,000 - £45,000 is available with an OTE of £70,000 (uncapped), • 25 days holiday increasing with length of service and with some flexible bank holidays, • Life assurance, • Pension, • Medical cover, • Share scheme access, • Training and development, • A real opportunity to build a career with a company that is part of a large group of software businesses with opportunities globally. This role is available immediately so please get in touch by applying below and shortlisted candidates will be contacted within 48 working hours. Highbridge Talent is acting as a recruitment agency in relation to this role

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Mechanical Engineer to join our growing Water Solutions team, with flexibility to be based in St Albans, Croydon, Basingstoke, Bristol, Cardiff, Exeter, or Plymouth. In this role, you’ll play a key part in delivering multi-billion-pound capital programmes across the UK water sector, contributing to projects ranging from small rural sites to complex, multi-million-pound infrastructure and non-infrastructure schemes in both water and wastewater. These long-term frameworks extend through AMP8 and AMP9, offering security, variety, and the opportunity to make a real impact in shaping sustainable water solutions. You will contribute to several major frameworks, including: Key Programmes You’ll Support: • Southern Water – £3.7 billion Capital Delivery Programme:, • Strategic Delivery Partner (SDP) Frameworks: Supporting Tier 1 Contractors on: • Lot 1: Non-infrastructure water projects, • Lot 2: Non-infrastructure wastewater projects, • Low Complexity Delivery Route & SDP Lot 3 Infrastructure Frameworks: Partnering exclusively with Tier 1 Contractors to deliver high-quality wastewater infrastructure projects. • South West Water – Engineering Consultancy Services Framework:, • Lot 3 – Multi-Discipline Engineering Design, • Wessex Water – Capital Delivery Partner Framework:, • Lot 2 – Design Consultants With flexible working from our locations, you’ll collaborate across multi-disciplinary teams to deliver innovative and sustainable solutions. As part of AECOM, you’ll engage in impactful projects from inception through to delivery, enhancing the environment and supporting communities. Here's what you'll do: • Preparing feasibility studies, outline design, detailed design and construction support., • Producing design drawings, mechanical plant selection and specification., • Liaising and collaborating with our water and other discipline teams including civil, electrical, process and mechanical engineers nationwide., • Preparing design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc., • Site visits to carry out site surveys and the support of liaisons with clients, contractors & suppliers., • Producing plant layouts, technical specifications, Wimes datasheets, valve schedules, equipment schedules, lifting strategies and P&IDs, • Producing headloss calculations and pumping system analysis / pump selection If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • A degree (or equivalent) in Mechanical Engineering., • Progress towards Chartered Engineer status with a relevant institution, such as IMechE., • A proven ability to deliver engineering designs, reports, drawings, technical specifications, and calculations with confidence and precision., • Hands-on experience in delivering innovative solutions for water and wastewater engineering projects. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

You might not have heard of us yet - that's OK, you've found us now - come and find out more about our journey... Founded in 2017, Laka set out to transform insurance by connecting passionate cyclists to form a collective and protect their bikes for when things go wrong - a better model for insurance was born. For once people come first in insurance by fairly sharing the cost amongst each other. We exist to rewrite the rules of insurance so it’s something people stand with, not against. Our model: Laka makes sure everything runs smoothly for The Collective - from exceptionally fast claims, splitting the cost fairly, guaranteeing a maximum price and all the other heavy lifting of a regulated insurance business. For that service, the collective pays Laka a fee relative to the claims in a month. Take a closer look at exactly what this means and how it works _ What have we been up to since then...? In a nutshell, we've been very busy! Here are a few of the massive achievements we've had: 🚀 Raised £31m! 🚀 Launched Laka in a total of 10 countries, essentially helping more people in more places! 🚀 70 Lakanauts also based beyond NL (France) so UK, NL, FR and beyond 🚀 Supporting riders from everyday commuters to elite athletes and pro teams 🚀 Partnering with leading leading cycling brands and retailers across Europe 🚀 Been awarded ‘Best Cycle Insurance Provider’ (for the past 8 years in a row - go us! 🎉) 🚀 Giving our all to customers and they agree, check out our 4.9 google rating! Help us continue to change an outdated industry... We’re growing real fast on our path to make the Laka collective model the industry standard and we’re expanding across segments, products, and territories. We’re looking for innovative, bold and brave minds to help us build the world’s best insurance company. Customer Experience (CX) at Laka CX are firmly at the heart of why Laka was created - we exist to be there for people when shit happens - our CX function is where this magic takes place... You'll be a key part of our Customer Experience team. Providing a great customer experience is the most important part of our plans to grow the Laka brand internationally. As part of a small, dedicated function (we currently have a team of 11 superstars), you'll be the first point of contact for general and claim-related enquiries. What you'll be getting up to: • Supporting Laka customers (& potential customers) with general questions about Laka's products & services, their bicycle insurance and new initiatives via web chat and email, • Help Laka members to file their claims and guide them through the process of replacing or repairing their bikes and kit either directly with us or by coordinating with third-parties (shops, manufacturers, distributors etc), • Be the first point of contact for our B2B partners, supporting them to get their riders back on the road, • Work closely with the CX team across both the UK and NL to provide a convenient, swift and seamless experience to our members, • Collate feedback from the collective on an ongoing basis and produce actionable intel to support decision making, both in the CX team and others around Laka, • Get stuck into our squad-based work, with the goal to continue to make Laka the best it can be (you might find yourself working on exciting projects with the Marketing, Product or Technology teams), • Speak English and French!, • Have a super strong empathy for cyclists and what it means when someone has their bike nicked, damaged or injures themselves whilst out & about on their bike, • Have a decent understanding of technical terms in cycling (we can bring you up to speed with the latest bike tech), so you can best support all types of customers with whatever query is thrown your way, • Get loads of satisfaction from helping people going through a rough patch (losing your bike isn't easy, you know) - you'll understand what it means to go the extra mile and make a member's day, • Enjoy learning new things, working with a lovely bunch of people, and ultimately playing a huge part in the future of Laka!, • Are a fast learner and can get up to speed with common tools - we use a number of systems at Laka, but don't worry, we'll give you all the training you need, • Are comfortable chatting with our members, with excellent written communication in (native) Dutch & English You might have already guessed it but it makes a lot of sense to be passionate about cycling when joining Laka. Don't worry about any insurance knowledge - we can teach you the ins-and-outs of insurance and support your knowledge on all things bike parts, too. Of course it is great if you already have previous insurance experience, "WFT" (insurance) certificates or experience as a bike mechanic. We can work together on completing your skill set. Before you apply, please make sure that you currently have the right to work in the UK (we're really sorry, but we're not able to provide visa sponsorship for this role). What can you expect from working at Laka? 🏠 Remote-first way of working - you choose whether you work from home or our beautiful offices in London & Bristol (we have no minimum expectation of how many days you come in, although we'd love to see your friendly face!) 📈 Share options - we want you to be rewarded for Laka's success - everyone in the business is granted share options when they join 💰 Company bonus scheme - if the company hits its targets, you'll get a cash bonus of 5% of your base salary annually 🌴 Annual leave - 25 days holiday (plus bank holidays), with the option to roll over up to 5 days per year 💶 Pension scheme - Laka pays 3% of your base salary into your pension to help you save for the future 💊 Private medical insurance - we’ll give you individual private cover, with the option to add partners & dependants too (at a small cost) 🖥 Home set-up allowance - in addition to letting you choose the kit you want (MacBook or Windows laptop, plus additional equipment like screens, keyboard, etc), we'll also give you a one-off budget of £200 to get anything else you want in order to make your homeworking environment a comfortable place to be 🍽 Lunch on us - £15 every first Wednesday of the month to enjoy lunch on Laka - pop out locally with people in the office, or order-in at home, the choice is yours 💃 Company-wide events - we love getting everyone together as much as possible - expect regular events throughout the year, for team building, bonding, and general good old-fashioned fun! 🎳 Monthly socials - as if quarterly company events weren't enough, we also give each office a budget for a monthly social activity (think anything from low-key dinner & drinks through to adventure golf, paddleboarding, bowling, electric darts, trampoline parks and more!) 👚 Laka swag - we'll give you some lovely Laka kit to get you started, including a jumper & t-shirts so you can feel (& look) like part of the family 🚴 Laka credit - for all you cyclists, we'll give you £10 credit per month towards insuring your bike(s) with us - plus give you access to a bunch of cycling industry discounts 🧠 Mental health support - unlimited support via Spill, including one-to-one therapy sessions 🌈 Belonging at Laka We're committed to building and sustaining a business that promotes diversity, equity, inclusion and belonging - our customer collective is broad and inclusive, and we'd like our own people to be too. We're fast becoming a global community of people and we believe each person's unique qualities should be celebrated as they are a huge part of what makes Laka a great place to be. We'd love you to bring your authentic self to work every single day, no matter your age, ethnicity, religion, citizenship, gender identity, sexual orientation, disability status, caring responsibilities, neurodiversity, or anything else that makes you, you. If you’d like to request a reasonable adjustment as part of our application or assessment process, please let us know by emailing _.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to shape the future of water infrastructure? We’re looking for a Senior Mechanical Engineer to join our growing Water Solutions team, with flexibility to be based in St Albans, Croydon, Basingstoke, London, Bristol, Cardiff, Exeter, or Plymouth. In this role, you’ll play a key part in delivering multi-billion-pound capital programmes across the UK water sector, contributing to projects ranging from small rural sites to complex, multi-million-pound infrastructure and non-infrastructure schemes in both water and wastewater. These long-term frameworks extend through AMP8 and AMP9, offering security, variety, and the opportunity to make a real impact in shaping sustainable water solutions. You will contribute to several major frameworks, including: Key Programmes You’ll Support: • Southern Water – £3.7 billion Capital Delivery Programme:, • Strategic Delivery Partner (SDP) Frameworks: Supporting Tier 1 Contractors on: • Lot 1: Non-infrastructure water projects, • Lot 2: Non-infrastructure wastewater projects, • Low Complexity Delivery Route & SDP Lot 3 Infrastructure Frameworks: Partnering exclusively with Tier 1 Contractors to deliver high-quality wastewater infrastructure projects. • South West Water – Engineering Consultancy Services Framework:, • Lot 3 – Multi-Discipline Engineering Design, • Wessex Water – Capital Delivery Partner Framework:, • Lot 2 – Design Consultants As part of a growing multi-disciplinary team with a long-standing presence in the region, you’ll be joining a group recognised for excellence, having won the IChemE Global Water Award 2023. You’ll have opportunities to develop your technical career not only through involvement in local projects but also by contributing to flagship initiatives across the UK&I and globally. With flexible working from our locations, you’ll collaborate across multi-disciplinary teams to deliver innovative and sustainable solutions. As part of AECOM, you’ll engage in impactful projects from inception through to delivery, enhancing the environment and supporting communities. Here's what you'll do: • Producing feasibility studies, outline design, detailed design and construction support., • Producing design drawings, mechanical plant selection and specification., • Liaising and collaborating with our water and other discipline teams including civil, electrical, process and mechanical engineers nationwide., • Deliver a high calibre of technical quality, contribute to bids, interface with clients and collaborators in design and planning., • Deliver to agreed budget, programme and quality along with supporting the preparation of project budget & programme., • Responsible for the design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc., • Site visits to carry out site surveys and the support of liaisons with clients, contractors & suppliers., • Producing plant layouts, technical specifications, Wimes datasheets, valve schedules, equipment schedules, lifting strategies and P&IDs, • Producing pumping stations designs, headloss calculations and pumping system analysis / pump selection If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just construct infrastructure but also uplift communities and enhance lives. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland, including 170 specialists across our England & Wales Water Solutions team. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. Here, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • A degree (or equivalent) in Mechanical Engineering., • Progress towards Chartered Engineer status with a relevant institution, such as IMechE., • A proven ability to deliver engineering designs, reports, drawings, technical specifications, and calculations with confidence and precision., • Hands-on experience in delivering innovative solutions for water and wastewater engineering projects. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

You will be lifting and growing the client’s website and tying in to applications, working closely with the Technical Lead, which requires a degree of creativity and ambition whilst being mindful of user constraints, hence a mature user-centric approach will need to be taken.

An excellent opportunity for an experienced Field Service Engineer Mobile Welfare Units to join a well-established company. Job Type: Full-Time, Permanent Salary: Competitive Salary, Depending on Experience. Location: Dundee Home Based Working in the Field. About The Company: They are a market leader in the repair and maintenance of towable and static cabins that keep site teams warm, fed and safe on construction, civils and events sites nationwide. About The Role: To attend, diagnose and repair mobile welfare cabins in the field restoring generators, power, heating, water and waste systems to full working order, first-time wherever possible, while working safely and unsupervised at customer sites. The role is van-based and mobile, covering breakdowns and warranty/service work across customer and hire-fleet sites. A large share of faults are diagnosed remotely (via unit telemetry) before attending, so the engineer must be comfortable interpreting remote data and arriving prepared. What the Role Actually Deals With: Generators / diesel engines - Oil pressure & oil-change faults, fuel systems, exhaust/DPF, alternator, AVR, governor, glow, E-stop, servicing. Engines: HATZ, Kubota, Lombardini, Perkins, Stephill (Boss L48/L70/L100 units). Plumbing, water & waste - Frozen/burst pipes, tanks, UV filters, water pumps, toilets, waste-level sensors, leaks. Electrical & power - 12/24V DC systems, Victron kit (inverters, Cerbo, MPPT/solar), fuses, relays, wiring looms, sockets, PIR lighting, "no power" / dead-console faults, electrical-test compliance. Diesel heaters - Parking/diesel heaters glow-pin and fuel-pump failure, re-priming, rewiring, thermostats, frost-related no-heat. Batteries - Lithium battery diagnosis (100/200Ah), BMS behaviour, Victron charge settings, deep-discharge recovery, charge/hold faults. Telemetry / comms - Units not updating/communicating SIM/modem, Cerbo, remote-monitoring diagnosis and SIM replacement. Towing & chassis - Lifting rams/pins, wheels-down locking, coupling, brakes, tyres getting units mobile. Hydraulics - Power packs, rams, solenoids for raising/lowering units. Fabrication - Doors, door closers, hoods, structural repair. Solar - Panels and MPPT charge faults. Roughly 1 in 5 reported faults turn out to be user error so customer education, clear on-site communication and honest reporting matter as much as the wrench work. Candidate Requirements Essential: Proven multi-skilled field service / plant / mobile-mechanic background (welfare units, generators, plant, HGV, marine, motorhome/leisure, or similar). Diesel engine fault-finding and servicing (small industrial engines HATZ, Kubota, Lombardini, Perkins or equivalent). 12V / 24V DC electrical competence fault-finding wiring, fuses, relays, inverters, charging systems using a multimeter. Confident reading fault data / telemetry and working from remote diagnostics. Practical plumbing / water-system repair skills. Strong problem-solving and first-time-fix mindset; comfortable working alone and unsupervised . Full UK driving licence ; B+E (trailer/towing) entitlement or willingness to obtain. Good customer-facing manner and clear written job reporting. Highly Desirable: Electrical qualification City & Guilds 2391 (Inspection & Testing) and/or 18th Edition (BS 7671) ; PAT competence. Experience with Victron energy systems (Cerbo GX, MultiPlus inverters, MPPT, VRM) and lithium/BMS battery systems. Diesel parking/air heater experience (Webasto/Eberspcher-type). Hydraulics (power packs, rams, solenoids). Fabrication repairs. Solar PV, and basic IT/comms (SIM, modem, routers) familiarity. Relevant safety tickets (CSCS Card, first aid, working at height, manual handling). Personal Attributes Self-motivated and reliable the customer's day-rate is stopped until the unit works again. Methodical and safety-first, especially around live electrics, fuel and lifting operations. Resilient and adaptable outdoor, all-weather, sometimes remote sites. Honest reporter records what was found and done, including when a fault is user error or unresolved. Working Conditions Field-based, mobile role with company van and tools. Regional travel to customer and hire sites; some early starts / site-hours working. Breakdown-response element may include on-call / out-of-hours cover (to be confirmed). Physical role: lifting, working outdoors, in confined welfare-unit plant spaces and all weathers. What they offer Competitive salary (depending on experience). Company pension. Company van, tools and PPE. Manufacturer and in-house training across generators, power, heating and telemetry. Varied, hands-on work with a UK manufacturer that builds what you fix. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need. TPBN1_UKTJ

Altrad are seeking a Principal Lifting Engineer to provide specialist technical expertise in lifting operations and support operational teams with lifting engineering solutions. You will prepare and review Lift Plans and Lifting Risk Assessments, ensure compliance with LOLER, PUWER, HASAWA and relev

Excellent opportunity for an electrically biased Crane & Lifting Equipment Engineer to join a well-established company.

Inspect and certify lifting equipment and cranes, ensuring compliance with regulations, and maintaining client relationships.

Mechanical Engineer Surveyor – Lifting Equipment / Cranes. Are you an Engineer with hands-on experience working on cranes, lifting equipment, mobile plant or anything covered by LOLER regulations?.

Regional Relief HGV Driver - Class 2 - covering Inverness cluster (Inverness, Tain, Dingwall, Invergordon, Fort William, Elgin).Drive Your HGV Career Forward with Travis Perkins - HIAB training provided!.Sociable hours: No overnight stays or late evenings, giving you an excellent work/life balance.F

Mechanical Engineer Surveyor for lifting equipment, inspecting and certifying cranes. Requires experience with lifting equipment and relevant qualifications.

Breedon Group plc is a leading vertically integrated construction materials group in Great Britain, Ireland, and the USA.We're dedicated to providing high-quality materials and services for the construction industry, with a commitment to safety, sustainability, and innovation.Joining Breedon means b

The University of St Andrews Students’ Association (aka Your Union) sits at the heart of the .Campus - recently voted as one of the leading Universities in the UK, ranked first in the UK by the Guardian and Times/Sunday Times and with a reputation to protect.With over 11,000 members we are th

HGV Driver - Class 2 - Edinburgh East.Drive Your HGV Career Forward with Travis Perkins - HIAB training provided!.Sociable hours: No overnight stays or late evenings, giving you an excellent work/life balance.Full-time, permanent hours: Employed directly with Travis Perkins.Competitive salary: Plus

A vacancy has arisen for a Seasonal Driver 2, you will be required to drive throughout Argyll and Bute, one of Scotland's most beautiful areas.Argyll and Bute is one of Scotland’s most stunning areas.As its award-winning council, we play a vital part in the day-to-day life and long-term future of

We are recruiting a Fleet and Driver Compliance Officer to join an award-winning team.Forming part of the existing Fleet Compliance Team to strengthen you will support Operator Licence compliance across the organisation.West Lothian Council operates a fleet of around 1,100 vehicle and plant items su

This is a permanent position for a driver, transporting pupils from within the Helensburgh area.Argyll and Bute is one of Scotland’s most stunning areas.As its award-winning council, we play a vital part in the day-to-day life and long-term future of our beautiful and diverse communities.Our unwav

The University of St Andrews Students’ Association (aka Your Union) sits at the heart of the .Campus - recently voted as one of the leading Universities in the UK, ranked first in the UK by the Guardian and Times/Sunday Times and with a reputation to protect.With over 11,000 members we are th

Connect Appointments is recruiting experienced Forklift Drivers to join an established logistics business in the Leven area of Fife.Our client operates a busy warehouse facility, offering ongoing night shift work with a clear route to permanent employment for the right candidate.Temporary to permane

Distant Islands Allowance per hour).A Relief Bus Driver is sought to undertake driving duties within Lewis ensuring that the buses are operated to the standards required by the Statutory Authorities and the Comhairle.You must have a current full class D (PCV) Licence, experience in all aspects of dr

Joining our friendly and hard working family as a Multi-drop Van Driver/Customer Service Assistant, you’ll be on the front line dealing with our customers both in branch and off site (when making deliveries); playing a vital role in our continued success, providing a first class service whilst kee

Based at Tealing Primary School or Strathmartine Primary School, Dundee.This job is workstyle 2B - Fixed.In this workstyle work is regularly undertaken at a fixed point within council premises.There is no requirement for out of office working.You will have a guaranteed shared desk and you will work

Distant Islands Allowance per annum).A Bus Driver is sought to undertake driving duties within Lewis ensuring that the buses are operated to the standards required by the Statutory Authorities and the Comhairle.You must have a current full class D (PCV) Licence, experience in all aspects of driving

Connect Appointments is recruiting Forklift Drivers to join an established logistics business in the Leven area of Fife.Our client operates a busy warehouse facility, offering consistent day shift work across a Monday to Friday week with a clear route to permanent employment for the right candidate.

Skibound Seasonal Ops and Transport Supervisor - France.Part of the Experience Education Group, SkiBound has specialized in school and adult group travel for over 40 years.As well as our locally run hotels, SkiBound operate ClubHotels which are exclusive properties run by Skibound English speaking s

School Cook Supervisor-beaulieu Park Pr.We're currently recruiting an ambitious Chef to help us create exceptional food experiences for CH&CO on a part time basis contracted to 27.As a Chef, you will be responsible for preparing and serving the kind of food that truly brightens our clients' and cust

General Manager and Assistant Manager to ensure we are providing a great customer service journey, along with the front of house team.Supporting in the safe running of the business and having great standards to ensure every shift runs smoothly.If you interested in progressing your career with us we'

Earn £14 - £19 per hour.Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 couriers.We’re recruiting self-employed delivery drivers in your area now.We have opportunitie

A leading infrastructure and support services organisation is seeking an experienced Depot Supervisor to join its Dundee-based operations team.The business delivers essential maintenance and operational services across highways, transportation, and critical public infrastructure, supporting communit

HGV Class 2 Driver – New Passes Welcome – Edinburgh.People Solutions are currently recruiting for an.This is a fantastic opportunity offering excellent rates of pay, full training, ongoing work, and genuine long-term career prospects.Newly qualified Class 2 Drivers are encouraged to apply.HGV dr

Tonne Van Driver – Make a Real Difference!.Are you ready to drive change and help a leading UK charity make an impact? We’re looking for a motivated 3.This isn’t just a driving job – it’s a chance to support communities, deliver hope, and be part of something bigger.Every mile you drive he

We are currently recruiting for an experienced.This is a fantastic opportunity to join a successful company supplying equipment to the construction, utilities, and infrastructure sectors.As an HGV Class 2 Driver, you will be responsible for the safe loading, delivery, and collection of heavy plant e

Physical fitness – regular lifting and manual handling is part of the role.

Monday–Friday, 36 hours per week.Valid UK driving licence with D1 category.This role is subject to a PVG check – new applicants £59, update applications £18.Full training, PPE, and overtime opportunities provided.Permanent opportunities available in the next few months.Safely transport passeng

HGV Driver – Plant & Tool Hire.Salary - £33,000 + Performance Bonus.Full Time | Permanent | Immediate Start Available.A leading equipment hire business is looking for an experienced HGV Driver to join its busy Plant & Tool division in Inverness.This is a full-time, permanent opportunity o

Tuesday to Friday with 45 minute unpaid breaks.Temporary ongoing work with no end date.Immediate Starts Available .Safely operate an C2 bin lorry on designated routes within Edinburgh.Collect and transport waste and recyclables to disposal and recycling facilities.Ensure compliance with health

This is a fantastic opportunity to join a fast-paced, technically advanced environment where your expertise will play a key role in ensuring product accuracy and performance.As a CMM Operator, youll be responsible for setting and operating coordinate measuring machines to inspect complex components,

About the RoleWe are recruiting experienced.Working within a modern, fast-paced distribution centre, you will play a key role in ensuring products are stored, picked, and replenished accurately while maintaining the highest standards of safety, quality, and compliance.Operate a VNA (Very Narrow Aisl

Your new company A leading infrastructure and support services organisation is seeking an experienced Depot Supervisor to join its Dundee-based operations team.The business delivers essential maintenance and operational services across highways, transportation, and critical public infrastructure, s

Production Supervisor Leicester Monday - Thursday 2.Midnight / Fridays off £18ph to £20ph Supreme Recruitment are looking to recruit on behalf of our client based in Leicester Temp to Perm for a Production Supervisor.You will be leading skilled late shift team within a high quality s

Groundworks Supervisor - Tameside Salary: £33,000 + Package Our client is looking to recruit an experienced Groundworks Supervisor to oversee groundworks activities on a large commercial building contract based in Tameside.This is a hands-on supervisory role where you'll be responsible fo

SHIFT PRODUCTION SUPERVISOR / 3 SHIFT ROTATION - MONDAY TO FRIDAY / DUNDEE AREA / SALARY £39,000 + OVERTIME / MANUFACTURING OUR CLIENT Is a leading manufacturing company based in the Dundee area with a long history of producing high quality product’s - a requirement for a Production Supe

CNC Setter/Operator – Yeadon, LS19 | Permanent | £16.DOE) Our client is a long-established precision sub-contract machining company based in Yeadon, Leeds, supplying turned and milled components across a range of industries.We're looking for an apprentice-trained CNC Setter/Operator

CNC Turner Programmer, Setter & Operator.Monday to Friday 0600-14:00/14:00 22:00.Join a Global Engineering Leader.We are seeking an experienced CNC Turner to join a highly skilled manufacturing team producing precision-engineered components for critical industries including Oil & Gas, Power, Defen