Trabajos document control en PlymouthCrear alertas

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an Engineering Surveyor (Assurance).The focus of the role is to provide secondary survey checks and assurance at key stages of construction. Project quality requirements will define the input required for secondary checks. This role will support the construction process and adherence to specifications.Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.Your team Location: Devonport Dockyard, PlymouthContract: Permanent, 42.5 hours a weekMaking Possible In this role as Engineering Surveyor (Assurance), you will be working in a live MOD facility. Your day-to-day tasks will include:Check and maintain survey control networksAssurance surveys for construction of RC structures; through pre-pour, post-pour checksAs-built surveys, through laser scanning and modelling of point cloudsEnsure survey data is collected and recorded accurately, following project QA/QC standards. Operating survey equipment to the highest of precision within a civils environmentSupport engineers with setting out activities to ensure consistent approaches to surveying and engineeringSupport the preparation of survey reports, drawings, and data outputs for engineering and construction teamsCoordinate with site engineers, supervisors, and subcontractors to ensure alignment between construction programme and survey operationsAssist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reportingManage and archive survey files and records to support project compliance and audits, using the Projects Document Management systemAttend daily briefings and provide updates on survey progress and issuesEnsure all surveying works are carried out in accordance with health, safety, and environmental regulations.Support other surveying work packages as requiredThis profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be givenWhat do you bring to the role? Essential:Degree, diploma, or relevant qualification in Civil Engineering, Surveying, or ConstructionSite based roleExperience in surveying and construction industriesConsiderable years of experience in a similar surveying position on a civil engineering projectExperience with surveying equipment; total stations, GPS/GNSS and laser scannersSurvey data processing software; AutoCAD Civil 3D, Leica Infinity, Leica Cyclone and Leica 3DRUnderstanding of QC1 procedures and quality documentation in a civils contextStrong attention to detail and organisational skillsExcellent communication and teamwork abilitiesCSCS Card and relevant site safety qualificationsMember of the CinstCES (or technical member working towards full member), or another bodyAbility to work under pressure and meet tight deadlinesDesirable:Experience working on major infrastructure or utilities projects (e.g., highways, rail, water, energy, nuclear)Knowledge of BIM or digital construction processesFirst aid and additional safety training certificationsWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an Engineering Surveyor (Machine Control).The focus of the role is to provide support for survey machine-controlled plant. This role will also support construction checks and as-built of construction operations that are completed with machine-control.Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.Your team Location: Devonport Dockyard, PlymouthContract: Permanent, 42.5 hours a weekMaking Possible In this role as Engineering Surveyor (Machine Control), you will be working in a live MOD facility. Your day-to-day tasks will include:Check and maintain survey control networksSupport machine control application for excavation, demolition and drilling operationsCheck design and create models for machine controlComplete checking of machine control operationsProvide check reports and as-builts, through laser scanning and modelling of point cloudsEnsure survey data is collected and recorded accurately, following project QA/QC standards. Operating survey equipment to the highest of precision within a civils environmentSupport engineers with surveying activities to ensure consistent approaches to surveying and engineeringCoordinate with site engineers, supervisors, and subcontractors to ensure alignment between construction programme and survey operationsAssist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reportingManage and archive survey files and records to support project compliance and audits, using the Projects Document Management systemAttend daily briefings and provide updates on survey progress and issuesEnsure all surveying works are carried out in accordance with health, safety, and environmental regulationsSupport other surveying work packages as requiredThis profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be givenWhat do you bring to the role? Essential:Degree, diploma, or relevant qualification in Civil Engineering, Surveying, or ConstructionSite based roleOperating on a 7/3/7/4 shift pattern as per programme needsExperience in surveying and construction industriesConsiderable years of experience in a similar surveying position on a civil engineering projectExperience with Leica Machine Control equipmentExperience with surveying equipment; total stations, GPS/GNSS and laser scannersSurvey data processing software; AutoCAD Civil 3D, Leica Infinity, Leica Cyclone and Leica 3DRUnderstanding of QC1 procedures and quality documentation in a civils contextStrong attention to detail and organisational skillsExcellent communication and teamwork abilitiesCSCS Card and relevant site safety qualificationsMember of the CinstCES (or technical member working towards full member), or another bodyAbility to work under pressure and meet tight deadlinesDesirable:Experience working on major infrastructure or utilities projects (e.g., highways, rail, water, energy, nuclear)Knowledge of BIM or digital construction processesFirst aid and additional safety training certificationsWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

Applications Engineer (Electronics/ Tech Support)Commutable from: Plymouth, Ivybridge, Totnes, Torquay, Newton Abbot, Exeter and the surrounding areas£40,000 - £46,000 + Progression + Autonomy + Technical Expertise + Pension + Private Healthcare + Life assurance + 33 days holidayAre you an Electronic Engineer with experience in industrial automation, electronics commissioning, electronics technical support and knowledge of drives, motors, soft starters or control systems looking to join an industry leading, innovative global company who can offer you the opportunity to be seen as a technical expert in your field, great work life balance and the exposure to new and exciting projects?On offer is the chance to work within a specialist electronic development team which looks after the end to end design, manufacturing and distribution of various electrical products and systems, where you will be seen as a technical expert and provide technical product support and insight to clients.This is an opportunity to work for a company who supplies products globally and are leading the way within the medium voltage industry. They pride themselves on on-going investment in technology and staying competitive within the market, and are there for looking to expand their applications/ technical team.In this role you will okay a pivotal part in the product management and technical support function, this will include providing technical support with valued clients pre and post sale, sales and business development support, technical document creation, technical proposal development and delivery of technical product training.This role would suit an Electronic Engineer with experience in industrial automation, electronics commissioning, electronics technical support and knowledge of drives, motors, soft starters or control systems on, looking to take the next exciting step in their career.The Role: \n\n • Applications Engineer (Electronics/ Tech Support)\n, • Providing technical support with valued clients pre and post sale\n, • Technical proposal development and delivery of technical product training\n, • Collaborating with Sales, Design, Development and Quality teams\n\n The Person: \n\n • Strong knowledge electronics technical support and knowledge of drives, motors, soft starters or control systems\n, • Ability to work independently and as part of a team\n, • Commutable from: Plymouth, Ivybridge, Totnes, Torquay, Newton Abbot, Exeter and the surrounding areas\n\n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Dyon Douglas-Whyte at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Elevations Design & Projects division are seeking a skilled and innovative Design Engineer to join a key client of ours engineering team in Plymouth. This role is responsible for designing, developing, and supporting the production of new and existing products, while ensuring technical excellence and alignment with industry standards. The successful candidate will play a pivotal role throughout the product lifecycle, from concept through to production support. Design Engineer Key Responsibilities\n\n • \n Lead the design and development of new products, guiding projects from initial specification through to production release. \n • \n Collaborate with cross-functional teams and stakeholders to deliver high-quality design outcomes. \n • \n Maintain and update 3D models and engineering drawings; ensure correct version control and document management. \n • \n Design and procure jigs, fixtures, and production tooling; provide comprehensive production engineering support. \n • \n Prepare and manage technical documentation including design specs, proposals, risk assessments, test plans, and manuals. \n • \n Perform mechanical analysis and validation of designs to ensure compliance with standards and regulations. \n • \n Support production operations by troubleshooting design-related issues and driving continuous improvement initiatives. \n • \n Provide technical support to sales and marketing teams, including product presentations and field demonstrations. \n • \n Liaise with customers, suppliers, and partner companies as needed to support engineering activities. \n • \n Assist in cost estimation, project planning, and tracking budget variance. \n • \n Contribute to departmental process improvements using PDCA and other continuous improvement methodologies. \n • \n Ensure all work is performed in line with company procedures and quality standards. \nDesign Engineer Qualifications & Experience\n\n • \n Degree in Mechanical Engineering or a related field (BEng or equivalent). \n • \n Prior experience in the railway or another regulated industry is advantageous. \nKey Skills & Competencies\n\n • \n Proficient in 3D CAD modelling and drafting (Solid Edge / Teamcenter preferred; training can be provided). \n • \n Strong design and problem-solving skills with a practical, hands-on approach. \n • \n Excellent communication skills—able to produce and present clear technical documentation and lead design reviews. \n • \n Collaborative mindset with the ability to build effective relationships across departments and with external partners. \n • \n Sound understanding of mechanical engineering principles, including best practices such as peer reviews. \n • \n Competency in mechanical analysis and customer-facing technical documentation. \n • \n Familiarity with PDCA and other continuous improvement tools. \n • \n Knowledge of welded fabrication and cast component design is highly desirable. \n • \n Experience with composite materials and/or electrical principles is a plus. \n

Are you ready to optimise manufacturing excellence? HellermannTyton has an exciting Moulding Process Engineer opportunity!Location: 39 William Prance Road , Plymouth , Devon , PL6 5WRSalary: £33,000 - £38,000Job Type: Full Time, PermanentAbout Us:At HellermannTyton, were more than just a leading manufacturer - were a trusted global partner in cable management, data connectivity, and network infrastructure solutions.Since 1935, our mission has been to provide innovative solutions for all cable management needs with customer satisfaction as our priority. Our portfolio includes more than 75,000 items, and we operate 15 world-class manufacturing facilities in 38 countries, employing over 6,000 people.You will be joining a business with ambitious growth plans, currently undergoing a period of change to enhance our performance and seize every opportunity for greater success. We strive to be elite and are looking for individuals who share this vision.Moulding Process Engineer - The Role:As a Moulding Process Engineer, you will develop, document, and optimise moulding process parameters to achieve consistent quality and performance. You will lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, while supporting the introduction and validation of new moulds. You will champion scientific moulding techniques and data-driven decision making, collaborate with Maintenance teams on continuous improvement activities, and provide technical training to setters and operators.Moulding Process Engineer - Key Responsibilities:- Develop, document, and optimise moulding process parameters to achieve consistent quality and performance- Lead troubleshooting of process-related issues and identify sustainable corrective actions- Support the introduction, commissioning, and validation of new moulds and tooling- Champion scientific moulding techniques and data-driven decision making- Collaborate with Maintenance and the CI Lead to drive TPM activities and equipment uptime- Implement and support SMED activities to reduce changeover times- Support the development and maintenance of process documentation including SOPs and validation reports- Provide technical training and coaching to setters and operators- Participate in trials, automation integration and continuous improvement projects- Support engineering change management and Quality and Validation standards- Promote a culture of right-first-time performance and continuous improvementMoulding Process Engineer - You:- Time served engineer or HNC (or equivalent) in a relevant engineering discipline- Proven experience in moulding or extrusion process engineering in rubber, silicone, or plastic environments- Strong understanding of moulding principles, tooling design, and machine control systems- Hands-on experience with process optimisation, validation, and troubleshooting techniques- Knowledge of TPM, SMED, Lean, continuous improvement principles and Six Sigma- Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE- Effective communicator and team player able to influence across departments- Methodical, safety-conscious, and resilient under pressureBenefits:- Enhanced annual leave- Enhanced family-friendly leave policies- An enhanced sick pay scheme- Comprehensive mental health and wellbeing support, including access to counselling, an employee assistance programme, mortgage brokering services, and additional resources for you and your family- Free on-site car parking- Subsidised canteen facilities at our larger locationsWe operate a strict Preferred Supplier List for recruitment agencies and are not currently seeking additional partners. Any CVs submitted speculatively by agencies outside of our PSL will be treated as a gift, and no fees will be payable.To submit your CV for this exciting Moulding Process Engineer opportunity, click Apply today!TPBN1_UKTJ

12 Month ContractUp to £70 per hour umbrella (Inside IR35)Mostly Remote – onsite 2 days per month in PlymouthJob Role:The Senior Engineer will act as a key interface to the Design Manager and Principal Mechanical Engineer (Mechanical Services Lead), providing technical leadership, risk ownership, supplier oversight, and mentoring to engineers and designers.Key Responsibilities:Technical Leadership & Design Ownership:Own/manage the technical baseline and requirements for assigned packages; act as Responsible Engineer and technical focal point from need identification through handover.Check and review key deliverables: calculations, drawings, specifications, BoMs, method statements, T&IPs, installation details and as-built records.Lead design optioneering and LFE (lessons learned), ensuring solutions are buildable, maintainable and operable.Provide formal checking/verification and sign-off per project quality plans; act as Checker where authorised.Planning, Control & Reporting:Build and own the design work plan (scope, assumptions, estimates, resources), align with schedule, and track/report progress.Manage change control, configuration, and auditable records; maintain risk/issue/action registers.Provide clear status reporting to the Design Manager/Project Manager and drive recovery actions where needed.Quality, Governance & Assurance:Ensure compliance with the Business Management System and Technical Manuals, applicable codes/standards and site rules.Organise and lead package-level Design Reviews, HAZIDs, constructability and ALARP reviews; close actions as required.Deliver right-first-time outputs (coordinated, clash-checked, specification-compliant).Safety, CDM & Risk:Discharge Designer duties under CDM; lead elimination/reduction of risk through design and document residual risks.Own safety assumptions, interlocks and protection logic (e.g., cranes/machinery), ensuring compliance with LOLER/PUWER principlesStakeholder & Interface Leadership:Lead coordination with EC&I, Civils/Structural, Construction, Commissioning, Operations, Safety, Security and Supply Chain.Direct supplier engineering: manage technical queries, submittals, factory tests, concessions and design integration; review and accept vendor drawings/data.People & Capability:Mentor engineers/designers; provide task leadership, technical coaching, and quality feedback on deliverables.Support competence assessment and contribute to resource shaping and onboarding for the package team.Commercial Awareness:Support the PM in forecasting, cost/value inputs, early warning/change notices and claims/variation reviews for technical content.Required Deliverables:Design basis, scope definitions; requirements & interface schedules.Calculations (loads, strength, stability, clearances, sizing, pressure/flow) and supporting reports.GAs, details, assemblies, schematics, marking/zoning plans, interface definition.Specifications (equipment, coatings, NDT, QA requirements), BoMs and technical bid evaluations.Test & Inspection Plans, FAT/SAT plans and commissioning method statements.As built redlines, asset data packs and handover files (including safety case inputs as required).Key Attributes:Demonstrate experience and knowledge in the design and implementation of Mechanical Systems/Services, preferably fluid systems such as water/pipe systems, pneumatics or hydraulics.Demonstrate understanding of how to substantiate complex requirements, preferably from the nuclear industry.Demonstrate experience of the design support to construction, operation, refit/repair of conventional and nuclear submarines and/or facilities.Demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle.Demonstrate a sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements.Demonstrate project specification, planning, project management and budgeting experience.Lead on safety, support regulatory and nuclear processes (CDM Designer, ALARP) and HAZIDs.Maintain rigorous configuration/document control to BMS/Technical Manuals.Drive design delivery and quality (requirements, calculations, drawings/specs/BoMs, T&I, FAT/SAT, commissioning inputs), lead design reviews, and deliver packages in highly regulated (nuclear/defence) environments.Demonstrate capability with CAD systems, document management systems such as BIM/CDE/Vault and MS Office; produce clear reports/presentations, lead meetings (incl. MS Teams), mentor juniors, plan/estimate/track work, and manage stakeholders/suppliers.Qualifications:The candidate will have a degree or equivalent in Mechanical Engineering or related discipline.Preferably Chartered Engineer status and member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council at IEng or CEng level.TPBN1_UKTJ

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a C++ Software Engineer subcontractor on an initial 12 month contract, with very likely extension. The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Candidates with a strong C++ Software Engineering / Embedded Software Engineer background ideally from the Defence / Aerospace industry would be suitable for this position. Rate: £67.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote working: The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Job Description: By embracing the latest software technologies and methods the Development Simulation software department delivers exceptional software solutions for non-production based test systems that meet the unique requirements of the prime software development teams. In addition we also provide equipment simulation systems to support product integration as well as software to support and assist the manufacturing process. The successful candidate will join the development team responsible for building and integrating real-time test and data capture systems. The role will focus on developing and maintaining software in a Linux environment, working closely with high-speed multi-channel SFPDP cards, real-time data flows, and complex multi-threaded processing pipelines. Proficient in C++ and with knowledge of C#, you will play a critical part in the design, development, integration, and verification of test software solutions that are central to our system validation and delivery capabilities. Responsibilities: • Design and develop real-time test and capture software on Linux systems using C++., • Integrate and interface with high-speed SFPDP cards across multi-channel data pipelines., • Architect and implement robust, scalable, and maintainable multi-threaded applications., • Define and implement data sequencing and synchronisation logic to support deterministic capture and replay., • Work with hardware teams to ensure seamless integration and timing alignment between software and capture cards., • Lead and contribute to system integration, verification, and testing at both component and system levels., • Conduct performance analysis, debugging, and optimisation of real-time systems., • Document architecture, interface definitions, and test procedures to support handover and formal test activities. Skillset/experience required: • Extensive experience in C++ development in a Linux environment., • Proficiency in C# for tooling, test interfaces, or Windows components as needed., • Proven experience working with real-time data systems, preferably involving SFPDP or other high-speed digital protocols., • Demonstrable skills in multi-threaded and concurrent programming., • Experience with low-level I/O, DMA, or driver-level interactions with PCIe cards or similar., • Familiarity with software sequencing frameworks or custom state machines for test execution., • Strong experience with integration, system test, and debugging complex interactions between software and hardware., • Strong understanding of software design principles, memory management, and performance optimisation., • Experience with version control systems (e.g., Git) and CI/CD Desirable Skills: • Experience with SFPDP (Serial Front Panel Data Port) specifically in defence, aerospace, or data acquisition contexts., • Knowledge of FPGA-based data acquisition systems and synchronisation methods., • Familiarity with unit testing frameworks, automated test rigs, or hardware-in-the-loop (HWIL) setups., • Experience developing or integrating with real-time operating systems (RTOS) or using real-time Linux extensions.

At FPC Global, our people are our greatest asset. We’re a fast-growing, global consultancy where collaboration, innovation, and ambition come together to deliver exceptional outcomes across the full facility lifecycle. Founded in 2014 by our CEO, Dean Francis, we’ve grown into a team of 140+ professionals working across the Americas, EMEA, APAC, and our London headquarters. We partner with clients to deliver integrated, future-focused consultancy services—setting new benchmarks for sustainability, technology, and performance. We believe great ideas can come from anywhere. That’s why we foster a culture where voices are heard, initiative is encouraged, and careers are built with purpose. The Digital Buildings System Engineer is responsible for managing the complete process of onboarding and integrating diverse building management systems (BMS), IoT devices, and facility management solutions into a designated cloud platform. This role is platform-agnostic, designed to work across various hardware and software ecosystems, ensuring seamless data integration and compatibility. Leveraging expertise in building automation technologies and communication protocols, the engineer connects disparate systems regardless of brand or manufacturer, enabling secure and optimized data flow for real-time analytics, remote monitoring, and enhanced operational efficiency. In this highly technical role, you will collaborate with global teams in IT, security, networking, and infrastructure to deliver IoT and cloud-based solutions for a global office portfolio. You’ll demonstrate adaptability by learning and working across multiple cloud environments (AWS, Azure, Google Cloud) and diverse BMS and IoT systems. Success requires a fast learner with strong communication skills, able to respond to shifting priorities and make informed decisions quickly, even with limited information. This role supports digital transformation for smart buildings, creating data-driven, future-ready facility management solutions Key Responsibilities: The responsibilities for this role include: To ensure smooth integration, optimization, and security of applications on cloud platforms. Troubleshoot issues, manage performance, and align cloud solutions with business objectives. Delivery of technical and some non technical (as training and knowledge allows) related engineering Services and projects for clients in accordance with the Proposal, Scope of Work (SoW) and/or Engagement Letter. Manage own workload, communicating and escalating any issues to line manager accordingly • Building System Integration:, • Assess and analyze existing building systems, including BMS, HVAC, lighting, energy, and IoT devices., • Map and document building systems architecture to ensure compatibility with cloud migration strategies., • Cloud Onboarding & Configuration:, • Configure cloud infrastructure to receive and process data from various building systems., • Develop and implement data flow protocols from on-premises building systems to cloud platforms, ensuring data quality and integrity., • Work with cloud platforms (e.g., AWS, Azure, Google Cloud) to set up required services, storage, and data processing pipelines., • Device Qualification and Testing, • Testing, validating, and troubleshooting application drivers across a range of IoT devices and gateways., • Collaborating with device manufacturers to support driver development, improve compliance, and resolve integration issues., • Managing and maintaining devices in an IoT testing lab, including physical installation, setup, configuration, and lifecycle management., • Supporting MSIs with deployment of compliant solutions and onboarding of building systems to Cloud Platforms., • Working with various tools and platform developers to identify defects, suggest improvements, and support feature validation., • Data Management & Security:, • Ensure compliance with cybersecurity and data privacy policies in data transfer and cloud storage., • Implement encryption, authentication, and access control measures to protect building and operational data., • Data Analytics and Reporting, • Analyze system data to generate insights on performance, sustainability, and operations., • Prepare detailed reports on building operations for stakeholders., • Preferred knowledge of Apps Scripts, • Collaboration & Stakeholder Engagement:, • Liaise with IT, facility management, and operations teams to understand building system requirements and constraints., • Provide technical support and training to on-site staff on cloud-based building management tools., • Testing & Troubleshooting:, • Conduct pre- and post-onboarding testing to validate data integrity and system performance., • Identify, troubleshoot, and resolve issues related to data transmission, system compatibility, and network connectivity., • Documentation & Reporting:, • Maintain comprehensive documentation of onboarding processes, system configurations, and cloud settings., • Generate regular reports on onboarding status, system performance, and key metrics, • FPC Responsibilities:, • Represent FPC in a professional manner internally and externally, and achieve a high level of customer satisfaction for all work performed, • Be an effective Digital Building Services team member, communicating with colleagues and working collectively to contribute to the development of Digital Buildings Services Group and the FPC business as a whole, • Report to line manager, acting in accordance with their requests and direction and those of FPC management, • Manage own workload, communicating and escalating any issues to line manager accordingly, • Act in accordance with all FPC employment policies and procedures, including FPC Employee Handbook, Health & Safety and Time and Expenses Reporting, • Carry out any other duties reasonably requested by FPC Management Required Qualifications & Experience Experience • 7+ years of experience in the design and configuration of building automation systems, cloud integration, or IT infrastructure roles., • Hands-on experience in systems integration and related industries such as architecture, design, or construction., • Strong understanding of cybersecurity best practices for cloud integrations., • Knowledge of edge computing and data preprocessing methods for IoT systems. Technical expertise in delivering digital and smart building projects, including: • Digital Building Systems Integration (design, development, and implementation)., • Building Controls Systems & Automation., • Cybersecurity best practices., • Device Qualification and Testing, • IP Networking (IPv4, IPv6, switching, routing, DHCP, WiFi, structured cabling, etc.)., • System Audits & Site Surveys. Education • Bachelor’s degree in Controls Engineering or a related field. Certifications (Preferred but not mandatory) • Experience with BMS systems such as Niagara, Delmatic, Delta, or LoRaWAN. Certifications in these are beneficial., • Cloud platform expertise in AWS, Azure, or Google Cloud, including relevant cloud services (e.g., data storage, IoT hubs). Certifications in these platforms are a plus. At FPC, we’re not just a company—we’re a thriving community where innovation flourishes, ideas are celebrated, and careers are shaped. When you join us, you become part of a dynamic team that: Shapes the Future: Work on groundbreaking projects that are redefining industries with sustainability, cutting-edge technology, and bold ambition. Supports Your Growth: From leadership training to cross-functional collaboration, we prioritize your professional development and empower you to explore new ideas, take initiative, and grow in your career. Values Balance and Inclusion: We celebrate diversity, foster collaboration, and ensure every voice is heard—while maintaining a strong commitment to work-life balance. Creates Impact: Contribute to the delivery of iconic, high-performance buildings and innovative solutions that have a lasting, positive impact on the world.

Legal & General (L&G) is a leading UK financial services group and major global investor. We’ve been safeguarding people’s financial futures since 1836, and strive to build a better society, while improving the lives of our customers and creating value for shareholders. We are one of the world’s largest asset managers and provide powerful asset origination capabilities. Together, these underpin our retirement and protection solutions: we are an international player in pension risk transfer, in UK and US life insurance, and in UK workplace pensions and retirement income. L&G Retail supports the savings, protection and retirement needs of around 14 million people, through our portfolio of retail and workplace businesses. Our Retail division helps people enjoy a more colourful retirement, both directly and through their employers, including Lifetime Mortgages, Retirement Interest Only Mortgages and financial advice on our range of lending products. We are the UK’s number one individual life insurer, and also provide Group Protection products for employers – all helping people to plan for the unexpected. We support home buying through our Mortgage Club – the UK’s largest – and our award-winning Surveying Services team. And our fintech team finds and supports socially useful start-ups and scale-ups working in the workplace, home, insurance and wealth areas. Joining us means helping create brighter financial futures for all our customers. We are seeking a skilled RPA Developer to join our dynamic team. In this role, you will be responsible for the design, development, maintenance, and support of Robotic Process Automations (RPA) using Blue Prism, as well as solutions built with Visual Basic for Applications (VBA), across our DC Operations. The ideal candidate will bring a creative and pragmatic approach to problem-solving, identifying opportunities to streamline manual processes through automation. You will play a key role in driving operational efficiency while ensuring robust change control practices are followed and measurable benefits are consistently tracked. What you'll be doing: • Ensuring the ongoing performance and reliability of RPA solutions and VBA applications across DC Operations. Promptly resolving issues, conduct root cause analysis, and maintain comprehensive documentation in line with established standards, • Creating and deploying robust RPA solutions and VBA that align with best practices. Leveraging technical expertise to develop innovative, value-driven automation that reduces manual processing where a strong return on investment can be demonstrated, • Working closely with non-technical stakeholders to define and assess business requirements. Ensuring mutual understanding of deliverables and incorporate all value-adding elements into the final solution, • Defining, following, and continuously improving development lifecycles to ensure requirements are well-documented, agreed upon, and delivered effectively, • Managing automation projects from inception to completion. Influencing and engaging senior stakeholders to secure buy-in and ensure alignment with strategic goals and resource optimisation, • Identifying opportunities to enhance operational efficiency through data analysis and insight. Designing and implementing tools that proactively support business needs and drive performance improvements, • Providing technical support for key Management Information (MI) and work management systems. Safeguarding data integrity and develop enhancements that enable accurate, efficient information retrieval and reporting, • Offering expert guidance and mentorship in programming, testing, and automation practices. Fostering knowledge sharing and support the development of team capabilities Who we're looking for: • Knowledge of past and present products, and the purpose of the products. In addition ensure that knowledge is acquired and maintained on new product propositions., • Advanced knowledge of appropriate systems utilised across DC Savings (FPF etc), • Expert understanding of SQL (Transact & DB2) to build efficient, complex queries & Database Applications., • Extensive Expert knowledge of Robotic Process Automation and Visual Basic for Applications (VBA) so that Applications can be built and supported to best practice standards., • Ability to support defect/ issue analysis, data investigations and business acceptance testing, • Excellent numeric aptitude, having a strong analytical and problem solving ability, • Ability to recognise and define complex patterns and relationships in data held in MI systems and databases, • Ability to model and document detailed application requirements, translating technical specifications into programmed applications, • Ability to functionally test developed applications to ensure performance against technical specifications Whatever your role, we reward performance and behaviour with a package that looks after all the things that are important to you. Here are some of the benefits we offer: • The opportunity to participate in our annual, performance -related bonus plan and valuable share schemes, • Generous pension contribution, • Life assurance, • Healthcare Plan (permanent employees only), • At least 25 days holiday, plus public holidays, 26 days after 2 years’ service. There’s also the option to buy and sell holiday, • Competitive family leave, • Participate in our electric car scheme, which offers employees the option to hire a brand-new electric car through tax efficient salary sacrifice (permanent employees only), • There are the many discounts we offer – both for our own products and at a range of high street stores and online, • In 2023, some of our workspaces were redesigned. Our offices are great spaces to connect and collaborate and have your wellbeing at the heart At L&G, we believe it's possible to generate positive returns today while helping to build a better future for all. If you join us, you’ll be part of a welcoming, inclusive culture, with opportunities to collaborate with people of diverse backgrounds, views, and experiences. Guided by leaders with integrity who care about your future and wellbeing. Empowered through initiatives which support people to develop their careers and excel. We care passionately about outcomes rather than attendance and are therefore open to discussing all kinds of flexible working options including part-time, term-time and job shares. Although some roles have limited flexibility due to customer demand, we accommodate requests when we can. It doesn’t matter if you don’t meet every single criterion in this advert. Instead, think about what you excel at and what else you can bring in terms of strengths, potential and connection to our purpose.

Ready to make travel easier for millions? Airalo is the world’s first and largest eSIM store, helping travellers stay connected seamlessly in over 200 countries and regions. We trust our teams to take ownership, put customers first, and do work that has a real impact every day. What’s in it for you? Airalo offers team members a range of perks, including remote work, generous PTO, wellness and learning allowances, and, of course, our annual Airalo Away retreat. Learn more about our benefits here; _ Hi, I'm Andra, Director of Data at Airalo! Our team works across the full data ecosystem, from collection to insights activation, ensuring that every piece of data drives meaningful action. We’re curious problem-solvers who love tackling challenges that haven’t been solved before and building tools and processes that scale impact across the company. Airalo’s fully remote Data team is growing. You’ll turn numbers into decisions that shape the future of our business, collaborating with cross-functional teams to solve complex problems and influence how millions of travellers stay connected. This isn’t just dashboards - it’s using data to drive strategy, inform product and growth decisions, and create real impact. You’ll have access to best-in-class tools, the freedom to experiment, and a team ready to turn insights into action. Do you thrive at the intersection of marketing science and business strategy? We're looking for a Principal Data Analyst, Marketing Analytics to own and execute our marketing measurement strategy - from Marketing Mix Modeling and incrementality testing through to attribution, channel economics, and budget allocation. This role is for someone who combines deep technical expertise with the ability to influence how a global organisation thinks about growth. You'll design experiments, build models, and deliver the insights that shape how we invest our marketing spend across 190+ countries. But measurement only matters if it changes decisions - so you'll also drive adoption of your work across the Growth organisation, build measurement literacy with stakeholders, and elevate the data culture that turns analysis into action. If you're ready to operate at the frontier of modern marketing measurement in a high-growth, global business - we'd love to hear from you. Manage and evolve Airalo’s growth MMM portfolio - driving the existing market model from validation into a production-grade decision tool, and scaling to additional markets as growth ambition and data readiness allow. Design and execute incrementality experiments (geo-holdouts, conversion lift studies, synthetic control, difference-in-differences) that calibrate the MMM and establish true causal impact of marketing spend across channels. Evolve our attribution methodology: determine the right models and attribution windows for our purchase cycle, specify the data requirements, and measure the impact of tracking remediation on attribution accuracy. Calculate and continuously optimize the CAC metrics (platform-reported, internally-attributed, incremental, and blended) and own LTV:CAC as a strategic KPI reported to leadership. Build measurement literacy within the Growth and Acquisition teams: train stakeholders to interpret the LTV/CAC related metrics, understand the difference between attributed and incremental performance, and use self-service reporting with confidence. Build and maintain the performance marketing reporting framework - with Analytics Engineering to ensure the underlying models serve both reporting and measurement needs. Act as analytics partner to the Growth and Acquisition teams: translate business questions into measurement plans, deliver the analytics that inform spend decisions, and build self-service reporting that reduces ad-hoc dependency. Drive adoption of measurement outputs-ensure MMM scenarios, incrementality results, and attribution insights translate into concrete budget allocation changes Contribute to the development of a unified decision framework that integrates signal health, attribution, and incrementality into budget allocation guidance with clear go/no-go criteria for scaling spend by market and channel. Build institutional knowledge: document every experiment result, every MMM refresh, and every signal quality trend so that each quarter’s decisions are better informed than the last. Collaborate with the Senior CDP Engineer and MarTech on the data and signal infrastructure that underpins measurement - defining what you need, so they can build it right. Several years of experience in marketing analytics, marketing science, or growth analytics, with deep expertise across at least two of Marketing Mix Modeling, Incrementality Testing (geo-experiments, RCTs), and Multi-Touch Attribution. Hands-on experience building, validating, or calibrating MMM models- whether using Robyn, Google Meridian, PyMC-Marketing, LightweightMMM, Bayesian regression, or working closely with vendors who do. Strong foundation in causal inference and experimental design: you understand difference-in-differences, synthetic control, propensity scoring, and when each method is appropriate. Expert-level SQL and Python (or R). You can write production-quality code, not just analysis notebooks. Experience with modern data warehouses (BigQuery or Snowflake) and familiarity with analytics engineering workflows (dbt preferred). Experience with data visualisation and BI tools such as LightDash, Looker Studio, Tableau, or Metabase. Proven track record of calculating and optimising channel-level CAC, LTV, churn, and ROAS, and using these metrics to influence marketing spend decisions at scale. Exceptional communicator: you navigate deep technical conversations and translate findings into clear recommendations for senior stakeholders and board-level audiences. A proactive, self-starter mindset. You thrive in ambiguity, work autonomously, and are energised by building in fast-paced, high-growth environments. Experience with Bayesian modelling frameworks (TensorFlow Probability, PyMC, Stan) and their applications in marketing measurement. Familiarity with mobile analytics platforms and MMPs: Adjust, AppsFlyer, CleverTap, or similar. Experience with ad platforms (Google Ads, Meta Ads, TikTok Ads, Apple Search Ads) and their attribution APIs, conversion modelling, and server-side event integration (cAPI, Enhanced Conversions, SKAN). Knowledge of the eSIM, telco, MNO/MVNO, or travel-tech landscape. Exposure to semantic layers, metrics-as-code, or KPI governance frameworks. Experience with privacy-first measurement strategies in the post-cookie, post-ATT world. Experience with cross-border or multi-market attribution challenges where marketing geography and conversion geography diverge. If you are interested in this position, please apply via the link. Please note that to be considered for this role, you must reside in and be fully eligible to work in either Romania, Spain, or the UK. Proof of a valid right to work in one of these three countries will be required. By applying, you acknowledge and agree that, in case of successful application, Airalo may request to run background checks as a condition for entering into an agreement with you. Rest assured that these checks will only occur upon your prior consent and at the end of the selection process, and will be strictly limited to what is allowed under the laws that are applicable to you. All data that you share or that we collect in connection with such checks will be processed in accordance with our Privacy Policy, available here: _ We sincerely thank all applicants in advance for submitting their interest in this opportunity. Airalo is an equal-opportunity employer and values diversity, equity & inclusion. We do not discriminate on the basis of race, religion, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We are committed to providing reasonable accommodations upon request for individuals with disabilities throughout our job interview process. At Airalo, we use AI-assisted tools as part of our recruitment process. Your application will be reviewed using tools that help our recruiters analyze and organize CV information. These tools support, but do not replace, human judgment; all hiring decisions are made by humans. If you progress to an interview, we may use tools to generate AI-assisted notes - you can opt out of these. For more information on how we handle your data, please see our Privacy Policy: https://www.airalo.com/more-info/privacy-policy.

Description At Spotted Zebra, we're building something we genuinely believe in: an AI-native end-to-end hiring platform that helps the world's leading organisations find the right people, faster and fairer than ever before. In short, we're making hiring something everyone loves again - both talent teams and candidates alike. We're a multi-award-winning Series A company giving talent leaders the solution they've always needed. Skills science native. AI-amplified. Built by people who've lived and breathed TA and knew there had to be a better way. Spotted Zebra brings Interview Intelligence, Skills Assessments, and AI Interview Agent together in one powerful platform, designed for intelligence and action. One powerful agent and assistant: Spot. Working the way talent teams need it to, always with humans in control. The result is talent teams get the insight to predict who will succeed, the speed to move before competitors, the governance to defend every hiring decision, and the capacity to focus on the human moments that matter most. But our product is only part of the story. Spotted Zebra isn’t just building an AI-native product; we’re building an AI-native company. AI is changing how we build, sell, support customers and make decisions. We use it to move faster, stay closer to customers, reduce unnecessary processes, and give talented people more leverage in their roles. That means joining Spotted Zebra isn’t just a chance to work on the future of hiring. It’s a chance to help shape what the future of work looks like inside a scaling company: compact, ambitious teams using AI to collaborate better, make decisions quickly, and deliver meaningful impact at speed. The FTSE100 and Fortune500 companies trusting us include British Airways, NIQ, Domino's, Lidl, Merlin Entertainments, AWE, United Utilities, and Paramount. We've been named Personnel Today's Talent Acquisition Supplier of the Year 2025, secured gold across multiple industry awards, and were recently named on the UK Top 100 Startups List. But what we’re most proud of is the team. People join Spotted Zebra because the mission is real, the product is genuinely exciting, and the opportunity to shape the future of hiring is huge. What makes it special is the way we work: smart, committed people in compact teams where trust is high, decisions happen quickly, and everyone has the chance to make a visible impact. If that sounds like the kind of place you want to do your best work - read on. Fun fact: A group of zebras is called a dazzle – and ours truly is dazzling! We create a culture in which our team thrives and gallops ahead. As we roam free and empower our dazzle, we gallop ahead on the journey to achieving our goals. We understand this journey will pose challenges along the way, yet we brighten the trail with our positive mindset and encouragement of others. The dazzle continuously moves, gaining knowledge and skills so that we can graze new grounds. As our Integration Solutions Consultant, you're the technical integration expert our enterprise customers rely on to connect Spotted Zebra seamlessy into the systems they already run on. You join implementations when the conversation turns technical - ATS, Workday and other HRIS, SSO, Outlook and Microsoft 365, data flows and field mapping - and you make integrations work. You won't own the whole implementation (our Implementation Managers and Skills Science Solutions Consultants lead that), and you won't be hands-on building every integration - we have a dedicated Product Integration Engineering team for that. You are the customer-facing front of that team: the person who scopes what's possible, designs how data should flow, and gives customers clear, credible answers on technical feasibility, then works tightly with our engineers to deliver it. If you love untangling enterprise tech stacks, can hold your own with TA Leaders, Recruiters and IT architects alike, and want to shape how a fast-evolving product plugs into the world's biggest employers - this one's for you. Key responsibilities: • Act as the technical integration expert across enterprise implementations, joining solution and discovery conversations when they turn to ATS, Workday/HRIS, SSO, Outlook/Microsoft 365, data flows, field mapping and integration options, • Lead integration discovery - understanding the customer's tech stack, map their requirements to Spotted Zebra's integration capabilities, and translate business goals into a workable technical design, • Design and document field mappings, data flows and integration approaches, including the source of truth between systems such as Workday and Spotted Zebra, and what is standard versus bespoke, • Scope and confirm technical feasibility - what's available today versus on the roadmap - giving customers honest, credible answers and escalating to the Product Delivery Manager and Product only by exception, • Support pre-sales as the integration expert - joining sales conversations with prospects to assess feasibility, answer technical questions, scope requirements, and contribute to RFPs and security questionnaires so deals are set up to succeed at implementation, • Act as the customer-facing front of our Product Integration Engineering team - translating customer requirements into clear integration specs, working primarily with that team's Product Manager (and directly with engineers when needed) to get integrations built, and keeping the customer informed throughout, • Own the integration workstream alongside the Implementation Manager - spotting risks early, coordinating with Product Integration Engineering, troubleshooting issues, and keeping delivery on track to go-live, • Partner with the Skills Science Solutions Consultant on what assessment and AI Interview evidence is appropriate to share back into the ATS, and with the Product Delivery Manager on feasibility and customer-specific product work, • Support phased approaches - enabling customers to go live without a full integration and add ATS/Workday integration later, • Build repeatable integration playbooks, templates and documentation, and feed integration insights back to Product and Engineering to make delivery more scalable, • Provide input to information security, SSO/identity and supplier onboarding conversations as needed, • Help shape the integration roadmap - channelling customer needs, recurring requirements and field insights to the Product Integration Engineering team's Product Manager to inform priorities and influence what we build next Requirements • Hands-on experience designing and delivering integrations between SaaS products and enterprise systems including Workday, SuccessFactors and Oracle, • Strong working understanding of integration methods and concepts - APIs, webhooks, data/field mapping, ETL, SSO/SAML and common HR data flows, • Customer-facing confidence - able to lead technical discovery with both senior business stakeholders and technical/IT teams, and explain complex integration topics in plain language, • Comfortable navigating ambiguity in a fast-evolving product, with the judgement to know what's standard, what's bespoke, and when to escalate, • Experience supporting sales cycles and pre-sales as a technical or solutions expert - comfortable being the integration authority in front of prospects, not just delivering after the deal is signed, • Experience contributing to RFPs, security questionnaires and technical proposals - comfortable with the written and compliance side of enterprise deals, • Strong organisational skills, able to run multiple integration workstreams across concurrent enterprise implementations, • A genuine startup mindset - adaptable, resilient, resourceful, and comfortable delivering something that's still evolving, • Familiarity with SSO/identity (SAML, OIDC), Microsoft 365/Outlook integration, and middleware/iPaaS tools (e.g. Kombo/Merge), • Data literacy or light scripting (JSON, SQL, Postman) to validate and troubleshoot integrations, • Exposure to AI governance, information security processes, or supplier onboarding requirements, • Willingness to travel occasionally for client visits, including potential international travel Benefits Meaningful share options Health insurance Enhanced pension Nursery salary sacrifice scheme ️ 25 days holiday (excluding bank holidays) Remote-first Work from home budget L&D budget Dental cover Eye-care support Co-working space budget Wellbeing allowance ✈️ Travel insurance Electric car scheme Beyond our core benefits, you'll get access to the latest AI-powered tools and technologies, giving you everything you need to do your best work. At Spotted Zebra, we welcome people of all stripes. We are committed to providing equal opportunities and an inclusive and diverse culture. We believe that each and every one of us possesses an extraordinary set of skills and abilities, waiting to be discovered, nurtured, and harnessed for the benefit of all. We are a team. And no matter your race, gender, sexual orientation, religion, civil or family status, age, or disability, we will empower you to unleash your superpower to help us create a world where everyone is able to utilise their unique blend of skills and abilities to contribute to the greater good. Everyone is unique and we encourage you to let us know in your application, or share with your recruiter directly, if there is anything we can do to make your interview experience with us more comfortable and positive. At Spotted Zebra, everyone is welcome. So even if you don't meet all the requirements, we would still love to hear from you. We are always keen to speak with people who are passionate about our mission. Ready to gallop ahead with us? We're a team that moves fast, thinks big, and isn't afraid to challenge how things have always been done. If you're excited about using AI and skills science to transform how the world hires, apply now and a member of our dazzle will be in touch!

Location: Mozambique with possibility of travel throughout the country and region Contract Type: Fixed Term, 6 – 8 months Start date: ASAP The HALO Trust is seeking an expert Armourer to support the development of its Weapons and Ammunition Management (WAM) programmes in Mozambique. HALO aims to reduce human suffering caused by armed violence and other drivers of migration by working with national partners to secure arsenals. Over the next 6 – 9 months, HALO will deliver an ambitious programme of institutional capacity development and advisory support to national security forces in Mozambique to strengthen the effective management of state-owned weapons and ammunition. The Armourer will lead this process, supporting the design and implementation of a new Small Arms Light Weapons (SALW) training framework to be delivered to national partners. This is a full-time position based in Mozambique and may require regional travel. HALO is an equal opportunity employer. Women and Mozambican nationals are encouraged to apply. Reporting to the HALO Mozambique WAM Project Manager, and working in collaboration with HALO’s WAM Capability Manager, the Armourer will provide technical support to WAM projects in Mozambique, including the delivery and support of SALW activities. This is primarily a training and development role, requiring someone with proven experience in designing and delivering high-level SALW training courses. The Armourer will support the development of technical standards for training and implementation of SALW activities, under the direction of the Project Manager, HALO Capability Team Manager and other Global Technical Specialists. Small Arms and Light Weapons Management • Plan, design, and deliver a SALW training framework for Mozambique., • Deliver and standardise SALW training courses in line with the context of Mozambique., • Ensure project outcomes meet national and international technical standards., • Assist the Project Manager in identifying areas for development, focusing on innovation, operational delivery, and safety., • Ensure regular coordination and communication with host country authorities and stakeholders, focusing on supporting and developing national technical standards., • Support the Project Manager and technical staff in their roles., • Ensure all SALW assessment, disposal, and transport activities are conducted safely and with appropriate risk assessments. General • Provide technical support to the programme as directed by management., • Support the orientation and development of national and international staff in Mozambique offices to enhance national operational capacity and understanding of SALW training progression., • Be willing to assist the programme management team with training courses, covering for colleagues during absences, or other tasks as directed by the Programme Manager. All international staff are expected to: • Work within HALO’s core values and standards., • Understand and comply with all HALO policies and procedures., • Operate in emerging country contexts where living standards may be basic., • Work appropriately within the cultural and legal framework of the host country. This is a non-contractual document and may change over time. It is intended to summarise the main duties and responsibilities of the role, not to be an exhaustive list. All HALO staff are expected to demonstrate flexibility and a willingness to undertake appropriate tasks as needed Essential Experience and Qualifications • Trained Armourer with 10 years of experience in a military or police role., • Civilian qualifications from recognised institutions considered on a case-by-case basis., • Military Armourer certification (e.g., Armed Forces Grade 1 or equivalent)., • Previous experience in delivery of Armoury Storekeeper, Storage Manager and Armourer courses., • Full fluency in spoken and written Portuguese. Desirable Skills/Experience/Qualifications • Knowledge and experience applying the Modular Small Arms Control Implementation Compendium (MOSAIC) in challenging environments, ideally in Africa., • Previous experience working with host nation military/police forces., • Comfortable delivering complex training to large groups in Portuguese., • Good English proficiency. HALO offers the following benefits package in Mozambique • $350/month overseas living allowance., • $750/month food allowance pro-rata., • Accommodation provided in shared flat., • 6-8 month contract with potential for extension., • 49 days of annual leave pro rata, increasing to 56 after two years of service., • Three return flights to home location., • Global insurance coverage. To apply for this role, please submit your CV and supporting statement (no more than one page) detailing why you are suitable for this role, before the closing date for applications which is 17th August 2025. If there is a sufficient calibre of applicants, we reserve the right to close the role earlier than the date noted. The HALO Trust is an Equal Opportunity Employer and does not discriminate against any applicant for employment because of age, disability, gender reassignment, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, or sexual orientation. The HALO Trust is committed to a culture that is both diverse and inclusive and we seek to recruit, develop, and retain the most talented people form a diverse candidate pool.

  About CAI  CAI Software builds digital work execution platforms and software solutions that help manufacturing businesses operate with greater clarity and control. Our people bring structure to complexity by replacing fragmented, paper-based processes with connected digital workflows that improve visibility, compliance, and decision-making in real industrial environments. With 45+ years of experience and a presence across 10+ countries, CAI combines deep industry understanding with practical technology. Our team consists of ~800 employees worldwide who work across 15 core industries and support 5,000+ customers, guided by sound judgment, long-term thinking, and outcomes that endure.     CAI Business Units and the Markets We Serve  CAI Software is organized into three business units - Graphic Communications, Process Manufacturing, and Discrete Manufacturing – aligned to the markets we serve. This structure allows our teams to stay close to customer needs while operating with the scale and support of a global software company.       This role is part of our Graphic Communications business unit, which serves the global print and Graphic Communications industry with ERP and production software designed for commercial printers, Graphic Communications manufacturers, promotional and transactional print providers, sign and display manufacturers, and in-plant print operations. Our solutions help customers manage complex production environments, improve operational visibility, and deliver high-quality products efficiently and profitably.      CAI is looking for a Project Manager to join our Graphic Communications Segment operations team.  This role is a remote role located in the UK but it would be highly desirable for the applicant to have French language skills. We are looking for someone who has experience in large-scale software implementations, has good project management experience and knows how to develop and organize a project plan from discovery to go-live.  Job Description: In this role, you will be responsible for managing the implementation of Graphic Communications ERP solutions enabling our customers to achieve their business objectives and operational results.  This will include but not be limited to project management and delivery, stakeholder and customer relationship management, aligning with customer strategy, policy and procedures, product customizations and scope management, team leadership, financial management, partnering with the customer to advise and guide on change management issues and identifying Graphic Communications PMO process improvements. Main duties and Responsibilities: Project Management and Delivery • Development of project plans – including estimation of resource requirements (skills, software, hardware etc) and timeframes, scheduling, budgeting, dependency identification and management, and change management planning, • Management of project delivery according to approved project plans, objectives, budgets and document progress, • Stakeholder management – through active involvement and regular communication with key stakeholders, • Project status reporting to key stakeholders including progress against milestones, issue and risk management details and budget versus actual costs, • Management of project issues and risks – including: issue and risk identification, logging, assessment and treatment strategies, • Management of project scope change through defined project change management processes, • Alignment of projects to strategic and operational plans of the Customer, • Conduct of Post Implementation Reviews to identify and implement process improvement for future projects, • Completion and filing of project documentation Consultative Relationship Building • Active promotion and realization of the benefits and value associated with project delivery and professional service delivery in particular., • Earn the trust of key client executives and personnel through demonstrated expertise, high quality delivery, and candid insight, • Actively seek opportunities to expand value to the client within current scope and through proposal of project extensions and additional projects Profitability Management • Managing chargeability of Graphic Communications services resources, • Managing personal chargeability, • Management of stakeholder expectations in line with delivery capability and priorities, • Alignment of deliverables and business needs and requirements. Customer awareness of an agreement with scope and contract terms.  Obtaining signoff on completion of deliverables., • Managing invoicing process including proactively building client understanding of invoiced charges. Job Requirements: • Bachelor’s degree or equivalent experience, • Fluent in English and French. A good level of competence in any other European languages would be a plus, • 8+ years including a combination of relevant industry experience and project management experience, • Ability to manage customer expectations in accordance with work priorities, • Strong inter-personal and relationship management skills, • Effective verbal and written communication skills, • High level of presentation/persuasive communication skills, • Knowledge of Print industry would be a bonus

We are a fast-growing vertical SaaS company that leverages innovation and disruptive technologies to improve consumer experiences, outcomes, and predictability in elective medicine. Our team thrives on challenges, embraces change, and is dedicated to transforming our industry. We are looking for a Customer Success Specialist who supports clinics across their entire journey with Adoreal, from the moment they sign on through every day they operate on the platform. This role blends hands-on onboarding with ongoing technical support, training, and adoption. One week you might be on site at a clinic walking their staff through new workflows. The next you might be remotely troubleshooting a billing issue or shaping a new help center article. We want someone who works proactively rather than reactively. You should be the person who anticipates where clinics will struggle, builds resources before they need them, and treats every support interaction as a chance to improve how the platform works for everyone. You are equally comfortable running a structured implementation project and jumping into an unexpected support ticket. Travel across Europe is part of the role. When a new clinic comes on board, or an existing one needs deeper training, you will be there in person. Candidates should live in Poland, Spain, Sweden, or the United Kingdom within an hour of a major airport. Onboard new clinics • Serve as the primary point of contact during implementation, coordinating across internal teams (technical, CRM, training) and clinic stakeholders., • Support configuration of Adoreal’s EMR and CRM systems and help clinics migrate data from their existing tools., • Organize and structure clinic data so it aligns with Adoreal’s analytics framework., • Manage project timelines, track milestones and dependencies, flag risks early, and communicate status clearly., • Travel on site to deliver staff training and lead clinics through their transition to the platform. Support clinics once they’re live • Act as the first point of contact for clinic staff and patient inquiries, ensuring all requests are addressed within 24 hours., • Troubleshoot technical issues, triage support tickets, and coordinate escalations with Product and Engineering when needed., • Monitor adoption after go live and reach out proactively to clinics that are struggling, rather than waiting for problems to surface. Train and enable on an ongoing basis • Build and maintain onboarding documentation, training guides, FAQs, training videos, and other self service resources., • Keep clinics current on new features, UI updates, and bug fixes through release notes and follow up sessions., • Travel on site for refresher training, workflow audits, or whenever a clinic needs hands on guidance after going live. Close the feedback loop • Track and document bugs, recurring issues, and feature requests., • Identify patterns across clinics and translate them into product insights for the Product and Growth teams., • Explore automation opportunities (chatbots, predictive troubleshooting, smarter self service) that reduce repetitive support work and free you to focus on higher value clinic interactions., • Minimum 4 years of combined experience across customer success, software implementation, technical support, or healthcare onboarding, ideally in SaaS or digital health., • Hands on experience with EMR and CRM systems, data migration, and digital workflow tools., • Native level English fluency (C2) with strong written and verbal communication. Additional European languages are a plus., • Demonstrated success managing multiple implementation or onboarding projects simultaneously., • Familiarity with healthcare workflows including patient intake, documentation, billing, scheduling, and compliance., • Strong familiarity with support ticketing systems and escalation processes., • Experience training clinical and administrative staff on new systems., • Comfort building help center content, training documentation, and self service resources., • Awareness of regulatory requirements in healthcare data handling and access control., • Willingness and ability to travel across Europe for clinic visits and on site training. Organized, collaborative, tech savvy, and oriented toward efficiency, scalability, and proactive problem solving. At Adoreal, we believe in supporting our team’s well-being and growth through comprehensive benefits and a collaborative, people-first culture. As a globally remote company, we prioritize flexibility, inclusivity, and teamwork rooted in the Adoreal principles. Benefits & Perks: • Paid time off (PTO) and paid holidays, • Performance-based bonuses and company equity opportunities, • Fully remote work environment with flexible schedules, • Collaborative and thriving team culture guided by Adoreal’s core values Joining Adoreal means becoming part of a high-performing, ambitious team that works hard, achieves extraordinary results, and enjoys the rewards that follow. Every employee receives equity, aligning us all in our shared success. Promotions and growth opportunities are limitless, driven only by your performance and dedication to our core principles: • We do what is best for the company, not what is best for individuals of the company—we take pride in our work, but not in pride itself—the success of Adoreal is more important than our egos., • We always share relevant information and admit our mistakes freely and openly (even when it is worrisome or uncomfortable to do so). Candid communication and a solution-oriented mindset is rewarded., • We innovate by finding the right problems, then solving them. We thrive on change that minimizes complexity and improves situations for our stakeholders., • We incentivize efficient results & people over process and focus only on the work that creates the most value for our stakeholders., • We are quietly confident and openly humble, being tenacious in our quest to perform and inspire others with our thirst for excellence., • We do not bow up and knock down—we care about our teammates and treat all of them with respect, regardless of their level within the company., • We are steadfast in our pursuit to better our company, our colleagues, and ourselves. When we hire, we only hire people who bleed our principles and who will hopefully be our replacement one day. Adoreal is an equal opportunity employer committed to fostering a diverse, inclusive, and fair workplace. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, veteran status, or any other protected characteristic under applicable U.S. law (EEOC) or local employment regulations where we operate. We encourage applications from candidates of all backgrounds. Accommodations for disabilities are available upon request throughout the recruitment process. We are not working with search firms for this role, thank you

More Than Just A Job As a proud B-Corp we focus on using business as a force for good. We do this by balancing out people and planet with profit. For every Mindful Chef recipe box bought we donate the equivalent of a school meal to a child in a less developed country (over 20 million meals donated and counting...) and we have also pledged to go Net Zero by 2030 but there are so many other initiatives that we would love to tell you about! What we are looking for We're looking for a design-focused engineer to craft exceptional, user-centric interfaces using HTML, CSS, and Javascript. This is an interface first role working in our Ruby on Rails codebase, where your primary responsibility will be building clean, responsive and accessible interfaces and experiences that empower our customers and our internal teams. Collaborating closely with our product team and pairing with a Rails engineer, you’ll bring designs, features and products to life following our 6-week cycle Shape Up process. You are You're experienced with the modern web, and you're able to write HTML, CSS, and Javascript You may lack direct experience with Rails, but you're comfortable working alongside it to apply your designs to implemented code with oversight and feedback You're comfortable with using design software tools like Figma to accomplish simple tasks You have good visual taste and design sensibilities, but may sometimes require support from a senior designer You care about creating accessible, intuitive, and visually appealing interfaces and have a high attention to these details You are able to run and own small-batch projects (2-weeks) from concept to delivery alongside a backend engineer. You will Work on our customer facing website and our internal backoffice web apps to enable our kitchen and operation teams to serve our customers high quality and healthy meals Identify and implement improvements to user experience, accessibility, performance and code quality across our interfaces Work on projects within 6-week cycles to design and build new features, and improve existing functionality Document and build out our internal design system, components, and base stylesheets as changes are made Communicate what you’re working on in team calls, and async updates What you'll be working with Tech Stack: Ruby on Rails, Hotwire (Turbo, and Stimulus), Tailwind v4 Design Tools: Figma Workflow: GitHub for version control and CI/CD, Shape Up methodology Why us? A competitive package that rewards your skills and dedication. Flexibility of remote (UK only) or hybrid working from our office based in Wandsworth. Be part of a Better Business (B-Corp), making a positive impact on profit, people, and planet. Join an award-winning startup backed by the largest food and beverage company globally. Experience a workplace that feels like home, complete with free meals, a gym, a vertical farm, and pet-friendly policies. Prioritise your well-being with perks like Vitality health insurance, access to learning resources, mental health support, and a generous holiday package (30 days + bank holidays). Enjoy a 50% discount on all Mindful Chef products. Enhanced policy of 6 months full pay primary parental leave and 6 weeks full pay secondary parental leave. About us We are MINDFUL. This is intrinsic to everything we do. From the healthy recipes we design, to the local, expert and caring suppliers we select and the way we treat each other, our customers and our environment. We are PERSONAL. We started Mindful Chef with our friends and families as customers and those are the kind of relationships we want to maintain however big we grow. Being real and true to ourselves and each other. We are UNAFRAID. We want to be the best – to challenge conventions, to think differently and be imaginative in how we solve problems. Brave enough to take on the big players and to do what’s right even when it’s difficult. Equal Opportunities At Mindful Chef, we embrace diversity and inclusion as a foundation that enriches our culture and fuels the success of our business. We are mindful of everyone’s differences and we take pride in the unique perspectives, experiences, and talents that each individual brings to our team. We are unafraid to tackle biases and challenge stereotypes, fostering an inclusive environment where everyone feels valued and empowered to contribute their personal strengths. Our commitment to diversity is not just a policy; it's a personal and collective responsibility that we take to heart. We believe that by being mindful of our differences, unafraid to confront barriers, and embracing the personal stories and journeys of our team members, we can achieve greater innovation, creativity, and harmony in the workplace. Together we celebrate diversity, and together, we are better.

Legal & General (L&G) is a leading UK financial services group and major global investor. We’ve been safeguarding people’s financial futures since 1836, and strive to build a better society, while improving the lives of our customers and creating value for shareholders. We are one of the world’s largest asset managers and provide powerful asset origination capabilities. Together, these underpin our retirement and protection solutions: we are an international player in pension risk transfer, in UK and US life insurance, and in UK workplace pensions and retirement income. L&G Retail supports the savings, protection and retirement needs of around 14 million people, through our portfolio of retail and workplace businesses. Our Retail division helps people enjoy a more colourful retirement, both directly and through their employers, including Lifetime Mortgages, Retirement Interest Only Mortgages and financial advice on our range of lending products. We are the UK’s number one individual life insurer, and also provide Group Protection products for employers – all helping people to plan for the unexpected. We support home buying through our Mortgage Club – the UK’s largest – and our award-winning Surveying Services team. And our fintech team finds and supports socially useful start-ups and scale-ups working in the workplace, home, insurance and wealth areas. Joining us means helping create brighter financial futures for all our customers. We are seeking a skilled RPA Developer to join our dynamic team. In this role, you will be responsible for the design, development, maintenance, and support of Robotic Process Automations (RPA) using Blue Prism, as well as solutions built with Visual Basic for Applications (VBA), across our DC Operations. The ideal candidate will bring a creative and pragmatic approach to problem-solving, identifying opportunities to streamline manual processes through automation. You will play a key role in driving operational efficiency while ensuring robust change control practices are followed and measurable benefits are consistently tracked. What you'll be doing: • Ensuring the ongoing performance and reliability of RPA solutions and VBA applications across DC Operations. Promptly resolving issues, conduct root cause analysis, and maintain comprehensive documentation in line with established standards, • Creating and deploying robust RPA solutions and VBA that align with best practices. Leveraging technical expertise to develop innovative, value-driven automation that reduces manual processing where a strong return on investment can be demonstrated, • Working closely with non-technical stakeholders to define and assess business requirements. Ensuring mutual understanding of deliverables and incorporate all value-adding elements into the final solution, • Defining, following, and continuously improving development lifecycles to ensure requirements are well-documented, agreed upon, and delivered effectively, • Managing automation projects from inception to completion. Influencing and engaging senior stakeholders to secure buy-in and ensure alignment with strategic goals and resource optimisation, • Identifying opportunities to enhance operational efficiency through data analysis and insight. Designing and implementing tools that proactively support business needs and drive performance improvements, • Providing technical support for key Management Information (MI) and work management systems. Safeguarding data integrity and develop enhancements that enable accurate, efficient information retrieval and reporting, • Offering expert guidance and mentorship in programming, testing, and automation practices. Fostering knowledge sharing and support the development of team capabilities Who we're looking for: • Knowledge of past and present products, and the purpose of the products. In addition ensure that knowledge is acquired and maintained on new product propositions., • Advanced knowledge of appropriate systems utilised across DC Savings (FPF etc), • Expert understanding of SQL (Transact & DB2) to build efficient, complex queries & Database Applications., • Extensive Expert knowledge of Robotic Process Automation and Visual Basic for Applications (VBA) so that Applications can be built and supported to best practice standards., • Ability to support defect/ issue analysis, data investigations and business acceptance testing, • Excellent numeric aptitude, having a strong analytical and problem solving ability, • Ability to recognise and define complex patterns and relationships in data held in MI systems and databases, • Ability to model and document detailed application requirements, translating technical specifications into programmed applications, • Ability to functionally test developed applications to ensure performance against technical specifications Whatever your role, we reward performance and behaviour with a package that looks after all the things that are important to you. Here are some of the benefits we offer: • The opportunity to participate in our annual, performance -related bonus plan and valuable share schemes, • Generous pension contribution, • Life assurance, • Healthcare Plan (permanent employees only), • At least 25 days holiday, plus public holidays, 26 days after 2 years’ service. There’s also the option to buy and sell holiday, • Competitive family leave, • Participate in our electric car scheme, which offers employees the option to hire a brand-new electric car through tax efficient salary sacrifice (permanent employees only), • There are the many discounts we offer – both for our own products and at a range of high street stores and online, • In 2023, some of our workspaces were redesigned. Our offices are great spaces to connect and collaborate and have your wellbeing at the heart At L&G, we believe it's possible to generate positive returns today while helping to build a better future for all. If you join us, you’ll be part of a welcoming, inclusive culture, with opportunities to collaborate with people of diverse backgrounds, views, and experiences. Guided by leaders with integrity who care about your future and wellbeing. Empowered through initiatives which support people to develop their careers and excel. We care passionately about outcomes rather than attendance and are therefore open to discussing all kinds of flexible working options including part-time, term-time and job shares. Although some roles have limited flexibility due to customer demand, we accommodate requests when we can. It doesn’t matter if you don’t meet every single criterion in this advert. Instead, think about what you excel at and what else you can bring in terms of strengths, potential and connection to our purpose.

Aker Systems was founded in 2017 by a team of experienced technology professionals who recognised an opportunity to provide highly secure enterprise data platforms to large organisations. We build and operate ground-breaking, ultra-secure, high performance, cloud-based data infrastructure for the enterprise. Our proprietary technology solutions drive performance and reduce costs while helping our clients to improve the management and sharing of data across their organisations. In 2024, Aker Systems won the Breakthrough Culture Awards highlighting growth companies putting culture first. In 2020 Aker Systems was recognised as a ‘One to Watch’ on the Sunday Times Tech Track. The Company was also recognised at the Thames Valley Tech Awards 2020; winning the Thames Valley Tech Company of the year, the Emerging Tech Company and High Growth Tech Business categories. We encourage people of all different backgrounds and identities to apply. We are committed to maintaining an inclusive, and supportive place for you to do your very best work. Duties & Responsibilities A UK Government Security Check (SC) clearance is required for this role. If you don’t hold SC clearance, we will support you to apply assuming you have lived and worked in the UK for a minimum of 5 years. As a Software Engineer, you will help lead the development of backend services for a government client leveraging the latest commercial and open-source technologies. This involves designing, developing, documenting and deploying backend services with a focus on high availability, low latency and scalability. • Design, develop, document and deploy new or enhanced features to our backend services that meet functional / non-functional business requirements, • Actively participate in the team’s elaboration and estimation of user stories, • Build frequent, small releases to maintain the team’s momentum, • Collaborate closely with other engineers in our cross-functional feature teams; ensuring that others can cover for you, and that you can cover for them, • Build, optimise and operate our Continuous Deployment pipelines, • Maintain operational responsibility for the services that your team owns Core Competencies The successful candidate will have a Bachelor's degree or greater in Computer Science or a related field. An equivalent of at least 5 years of working experience in a developer capacity is also acceptable for this position. You will have demonstrated the following competencies to the proficiency level appropriate to the seniority of the role; • JAVA programming experience as the core language, including Spring Boot., • Fluent in writing JAVA coding., • Experience with Kafka or a similar platform., • Experience with Scala and Spark., • Integrating with backing services, such as PostgreSQL, Redis or S3, • Good engineering practices including continuous delivery, clean code, documentation, defensive programming, automated testing and code reviews, • Working in Agile development and/or DevOps teams, • Using GitHub/GitLab for source control, • Test Driven Development with appropriate tools and frameworks, • Experience in Big Data technologies, • Experience in Public Cloud services, such as AWS Aker Systems Attributes At Aker we work as a team; we are collaborative, hardworking, open, and delivery obsessed. There is no blame culture here: try things, and take responsibility for the outcomes. You are always part of the wider Aker. We help our colleagues and take pride in successfully achieving difficult tasks. We run towards problems and help to solve them. Communicate always, do so accurately and in a timely fashion. In return, we offer a competitive salary, 25 days holiday plus bank holidays, company paid medical insurance and life assurance, pension scheme, annual training allowance, wellbeing allowance, virtual GP, Employee Assistance plan and more. Equal Opportunities Aker Systems fosters a diverse environment that encourages openness in its communications and is committed to providing equal employment opportunity for all people regardless of race, religion, gender or sexual orientation, age, marital status, national origin, citizenship status, disability, veteran status or other personal characteristics. We embrace differences of opinion and diversity because they help challenge us and find new groundbreaking technical solutions.

Our client is looking for Junior and Middle level Data Engineer to join the teams. 1 day in office every 3 months. Permanent, salary is £45k- £65k depending on experience Job Details: • Develop, document and maintain robust processes that transform and clean data for input into a variety of live systems and analytical workflows, • Liaise with colleagues across the business to elaborate requirements for new data products and translate these into technical plans, • Maintain process quality and robustness through coding best practice, including version control, documentation and peer review, • Investigate and elaborate data issues to help drive continuous improvement in data quality, • Migrate Legacy processes to new data platforms, • Learn new tools and techniques to support data processing and analytics as we expand our toolkit Skills we would love you to have: • Minimum 2:1 in a relevant technical degree., • A good understanding of database architecture and querying using SQL., • A sound understanding of data transformation and cleaning., • Programming experience using any language such as Python., • Understanding of Microsoft Azure, Power BI and Snowflake only need skills in SQL, Cognos and a data visualization tools like Tableau, Power BI or Qlik, • 2- 4 years experience, good communication to work across functional team

Shape the Industry and Your Career At Cytora, now an Applied Systems company, we’re transforming how insurers and brokers connect, operate, and grow. Our AI-powered platform is driving smarter decisions, greater efficiency, and seamless collaboration across the global insurance ecosystem. As we accelerate digital transformation, we’re looking for curious, collaborative minds ready to help shape what’s next. If you’re energized by innovation and inspired by impact, your future starts here. Position Overview As a Senior Backend Engineer at Cytora, you will be joining a backend functional team. As such, the teams are small (maximum 4/5 people) and work independently of each other. Each team has a technical lead and a product owner steering the team to make sure we deliver the right features. Regardless of team you join, you will be prototyping, implementing, shipping and supporting features that are changing the insurance industry. The core of our product is to digitize risks and to accomplish that we rely heavily on Generative AI. Our engineering and product teams are distributed across Europe. Below you can find the required and preferred qualifications. We made this list quite extensive so that you also get a taste of our tech stack! This role requires experience with: Git (we use GitHub) Python (buzzwords: msgspec, httpx, pydantic, fastapi, structlog, sqlalchemy, alembic, jinja2, pytest, ruff, mypy) Mypy (we use mypy, a lot. We also welcome candidates with experience with other static type checkers!) Rest APIs (we use openapi spec to document our apis) Relational Databases (we use Postgres) Docker (we use Docker to package our code, and docker-compose to run it locally) AWS Lambda (The vast majority of our backend code is deployed as AWS Lambda functions) AWS S3 AWS RDS AWS API Gateway AWS SQS AWS SNS AWS SES This role benefits from experience with: Redis GCP VertexAi (we use gemini a lot) GCP BigQuery (we use it to power our analytics) OCR engines (we use AWS Textract, GDocAI, and we have used tesseractOCR in the past) Prompt Engineering Kubernetes CircleCI DataDog Auth0 Role Based Access Control JsonSchema Pusher (we use it to push notifications to our Frontend Web App) LocalStack (we use it to mock AWS services locally) Terraform Why Cytora We’re building the future of insurance and we’re doing it together. At Cytora, now an Applied Systems company, we’re driven by a shared mission to transform the industry through AI-powered solutions that deliver smarter decisions, stronger connections, and better outcomes. We foster a culture that values who you are and recognizes that you’re more than your role: you’re a teammate, and you matter. We thrive on the strength of our diverse experiences and celebrate the uniqueness each person brings to work every day. We believe flexibility fuels performance. Whether remote, hybrid, or in-office, we empower our teams to work in ways that work best for them. Here’s what you can expect when you join us: Competitive salary Flexible working and remote options Professional development budget & conference access Annual company retreats A mission-driven culture that puts people first Location Cytora are a remote-first company. For this role you can be based anywhere in the UK or Ireland provided you have fluent spoken and written English, and have the permanent right to work without requiring visa sponsorship. AI Utilization We leverage AI tools to streamline parts of our recruitment workflow (such as resume parsing and interview scheduling). However, candidate screening, interviews, and final decisions are conducted by real humans. EEO Statement Applied Systems is proud to be an Equal Employment Opportunity Employer. Diversity and Inclusion is a business imperative and is a part of building our brand and reputation. At Applied, we don’t discriminate, and we are committed to recruit, develop, retain, and promote regardless of race, religion, colour, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, and other protected status as required by applicable law.

PLEASE READ BEFORE APPLYING: In order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Description A hybrid role with BAE Systems delivering procurement activity for the specific item/scope of work assigned, including the execution of the end-to-end procurement process e.g. delivery of information, products and services to quality, cost and schedule requirements. The project of work involves a training centre based in the heart of Barrow-in-Furness You will manage supplier performance and improvement activity, including proactive risk and opportunity management and developing, maintaining and managing stakeholders. As well as transact Major Subcontract Management activities from Market Analysis to Delivery of equipment and submarine units for Portland Walk Campus Simulated Environment Facility this is a hybrid position with a minimum of 2 days a week on site at the clients facility in Barrow Core Duties • Plan, control, execute and monitor all in-scope transactional procurement and major subcontracting activity with minimal supervision., • Develop and agree the procurement strategies for individuals' assigned area and lead implementation of plans. Promote cross functional collaboration to ensure full, thorough engagement and buy-in to contracting strategies., • Undertake and support the team in supplier assessment and due diligence activity to ensure the effective selection of suppliers to meet business needs., • Adapt approach to ensure that negotiations are concluded for an optimised business outcome., • Record and report cost savings / cost avoidance and deliver ongoing cost analysis and robust project / contract management., • Effectively manage sub-contract change., • Lead the timely identification, analysis and resolution of internal and external issues which may potentially affect the supply of material to programme requirements – escalating only when the context is particularly complex or high risk., • Update SAP eDMS / Teamcenter with quality, accurate information relating to the procurement activity and in accordance with document management policy and process., • Undertake the continuous review of supplier performance against quality, cost and delivery metrics to ensure Submarines' requirements are met, to secure improvements and to inform future Supply Chain strategy., • Develop and maintain supplier relationships as appropriate and undertake supplier development activities, with support and, in liaison with Supply Chain strategy team and Supplier Quality Assurance (support the delivery of Supplier Improvement Plans)., • Develop and maintain strong relationships with internal customers to optimise engagement and communication at all times., • Contribute to business wide change / improvement projects., • Delivery of a coherent subcontract document. Knowledge, Skills and Qualifications • prior procurement / supply chain experience ESSENTIAL, • any experience within the engineering/maritime/defence industries would be extremely beneficial, • In-depth knowledge of in-scope product / service being managed., • Knowledge of product nuclear safety and environmental impact., • Building understanding of the suppliers' operation and working with them to optimise their service to the Submarines' business., • Building understanding of Control Account Management duties., • Deliver value for money through a variety of commercial activities (including financial and pricing requirements). Why BAE Systems This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.” Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.

Job Purpose As a Specialist IT, you will report to the Head of IT and serve as a key technical person for our Cambridge site, while providing essential support in managing our IT infrastructure and ensuring the smooth operation of our Microsoft 365 ecosystem in collaboration with the rest of the Team. Your role will encompass a diverse range of responsibilities, making this an exciting and dynamic opportunity for IT professionals who thrive in a collaborative and evolving environment. You will have a some focus on our ERP systems such as Veeva and/or SAP. Your profile Major Accountabilities: Microsoft Expertise: Leverage your strong knowledge of Microsoft Azure and Microsoft 365 tools, including but not limited to Intune, Autopilot, Defender, SharePoint, Teams, to optimize and secure our IT environment. Veeva & ERP Support: User and systems support for our Veeva and SAP products. Collaborate with business stakeholders to ensure these systems align with operational needs and compliance standards IT Support: Provide top-notch technical support to our employees both remote or onsite, troubleshooting issues and ensuring smooth IT experience for all. Deliver training to enhance adoption and efficiency. Assist with onboarding and offboarding of users and devices, ensuring smooth transitions and access control. Infrastructure Management: Assist in the management, implementation and maintenance of our IT infrastructure, including servers, networks and cloud-based systems. Security and Compliance: You will have a very strong security mindset and will collaborate to implement and monitor with security measures to protect our sensitive data and ensure compliance with industry standards. Collaboration: Facilitate collaboration among teams by proposing new solutions and optimizing tools like Microsoft Teams, SharePoint, Zoom, etc. Project Participation: Contribute with your expertise to IT projects aimed at enhancing our technology capabilities and efficiency. Document technical solutions and contribute to the IT knowledge base to support continuous improvement and team learning. Adaptability: In the early stages of our IT department’s growth, be prepared to wear multiple hats and assist with various IT-related tasks and challenges as needed. Job Requirements: • Education: Bachelor’s degree in Information Technology, Computer Science or a related field or proven experience., • Good knowledge of Veeva products or SAP products is a plus., • Strong proficiency in Microsoft 365 tools and services., • Proven experience in IT system administration and support., • Excellent problem-solving and communication skills., • Ability to work collaboratively in a fast-paced, dynamic environment. Work Location: • 2 to 3 days a week in our brand new Cambridge Office. Why us? An exciting job opportunity awaits you! MoonLake is a dynamic and innovative company pushing the boundaries of possibility, and we are looking for passionate individuals to join our stellar team. What we offer: Learning Environment: An opportunity to learn and grow alongside experienced professionals in a supportive and innovative biotech environment. Impactful Work: Contribute to groundbreaking projects that have the potential to transform global healthcare. Flexibility and Balance: Work remotely/hybrid, enjoying a healthy work-life balance while making meaningful contributions to our team. Career Growth: A clear path for career progression, with the chance to take on more responsibilities as you develop your skills. About us MoonLake Immunotherapeutics is a clinical-stage biopharmaceutical company unlocking the potential of sonelokimab, a novel investigational Nanobody® for the treatment of the inflammatory disease, to revolutionize outcomes for patients. We continue to make significant progress in our Global Clinical Development Programs. The company’s focus is on inflammatory diseases with a major unmet need, including hidradenitis suppurativa and psoriatic arthritis – conditions affecting millions of people worldwide with a large need for improved treatment options. MoonLake was founded in 2021 and is headquarted in Zug, with hubs in Cambridge & Porto. Further information is available at _

£70,000 - £95,000 a yearHello 👋 Hello Senior Full Stack Engineers! The ideal candidate is motivated by creating real impact — producing practical, usable outcomes rather than overengineered or purely experimental solutions. Operating in a small, autonomous team, this person will combine strong technical execution with product-oriented thinking to help shape the future of Matomo. Efficiency, creativity, and execution are paramount. About InnoCraft and Matomo 📊 At _, we’re building a more ethical, privacy-first digital world. As the leading open-source web analytics platform, Matomo powers over 1 million websites and apps in 190+ countries, offering organisations the insights they need while maintaining full data ownership and user trust. In Germany, Matomo is particularly popular with public institutions, universities, and companies that take GDPR compliance seriously. We believe in openness, privacy, and transparency. Every month, our platform processes billions of data points — transforming complex information into intuitive, powerful reports that delight users. Matomo is available in 50+ languages and supported by a global, fully remote community with strong hubs in New Zealand, Germany and France. If you are interested you can take a look at our Github _. Why Matomo 💡 • Privacy-first: Ethical analytics built around GDPR and user trust. - Open Source: Shape a platform used in 190+ countries. - Global team: Work with colleagues across Europe, New Zealand, and Canada. - Established & Growing: Profitable and self-funded, with double-digit growth for 5+ years and a steadily expanding global team. - Fully Remote: 100% work-from-home within Germany, with flexible hours. - Career Growth: Clear Engineering Career Development Framework supporting skill progression and leadership growth. - High Calibre Team: Join a collaborative group of experienced engineers focused on innovation and impact. - AI-Empowered Development: Use AI tools and practices to accelerate experimentation, development, and quality. What you will do 🚀 • Full-Stack Innovation Development: You will design, prototype, and deliver new features across backend (PHP) and frontend (JS) that extend Matomo’s capabilities. Python and _ may be involved too. - Rapid Prototyping & Validation: Quickly test new product ideas — including but not limited to AI/insights — and validate them with real-world use cases. - End-to-End Ownership: Own ideas end-to-end, from concept through deployment. - Product-Centric Engineering: Think beyond code — consider usability, scalability, security, and long-term value when shaping new features. - Cross-Functional Collaboration: Collaborate directly with Matomo’s co-founders and senior engineers using Slack, Jira and Confluence. - Autonomous Execution: Operate effectively in a small, lean team with minimal oversight, driving projects forward independently. - Impediment Management: Proactively identify and resolve blockers to progress; escalate appropriately when outside support is needed to keep innovation moving. - Exploration Beyond AI: Identify and develop innovation opportunities across analytics, visualization, integrations, and user experience — not just AI. - Knowledge Sharing: Document and communicate concepts, prototypes, and learnings to spread innovation practices across the company. - Continuous Learning: Stay current with emerging technologies, frameworks, and product trends to bring fresh perspectives into Matomo. Qualifications 🤓 Essential Skills • 5+ years experience with backend development in PHP and experience in frontend development in _ / JavaScript - Track record of delivering features end-to-end — from concept through prototyping to production. - Ability to work autonomously in a small, fast-moving team, managing priorities and driving output without heavy oversight. - A product-oriented mindset: able to translate user needs and strategic goals into practical, impactful solutions. - Comfort balancing speed and quality: delivering quickly while avoiding over-engineering. - Strong problem-solving skills with a pragmatic approach to new technologies and innovation. - Understanding of security vulnerabilities and how to avoid them. - Skilled at writing automated tests, reviewing code and writing documentation. - professional English communication skills, with the ability to clearly share ideas, rationale, and trade-offs. - Must be comfortable working in a 100% remote, global and agile environment. Nice to Have • Experience with analytics, reporting, data visualisation, or AI/ML integrations. - Background contributing to or building on open source projects. - Familiarity with UX principles and/or data-driven product design. - Prior experience in an innovation, R&D, or product prototyping role. - German language proficiency. Benefits 💪 • Fully remote within United Kingdom - Budget for co-working space or work from home - Home office equipment (desk, chair etc) supplied after probation period - Flexible hours - we respect work life balance - 25 Paid holidays per year plus your national public holidays - Sick leave - Health Insurance: Your Well-being, Our Priority - A huge “playground” to grow your skill set - Volunteering Day: Empower Your Impact - Compassionate leave, including for pet loss. - Training Opportunities - Mental Health Support Services - Opportunity to have an immediate impact on a product that is used by more than 1 million websites and almost 2% of the whole Internet - Opportunity to work in a customer obsessed business, dedicated to building high-quality software with a strong mission of helping people grow their web projects while keeping full control of their data Location 🌍 • 100% Remote work position - Must be based in United Kingdom Diversity and Inclusion 🤗 InnoCraft celebrates the things that make you, you! We are an inclusive employer and do not discriminate against any employee or applicant for employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status or disability. We actively seek diversity in our workplace and embrace individuals with unique backgrounds, perspectives, and abilities! Come join our growing team that’s helping ensure a safer, more privacy-focused web/internet! #LI-RemoteWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

An experienced Quality Engineer who has strong experience within Quality tools like 8D, investigations, FMEAs PPAP and SPC is required for a large and reputable Manufacturing business based in Plymouth. Our client is able to offer a long term and progressive career within a Multi-National organisation. Main Duties: To actively support the implementation, maintenance, performance and improvements of the quality management system by applying appropriate quality tools and techniques. To provide training and support and to overcome barriers to quality improvement. To work independently and as a team in conducting quality engineering activities. To identify performance trends and potential and actual non-compliance in products and processes through data gathering, analysis, monitoring and auditing. To work in line with Quality, Safety & environmental policies, procedures and work instructions. Conduct root cause analysis and implement corrective ad preventative actions. Decision making, Able to stop production, drive containment actions and take corrective or preventative measures, to ensure effective and timely defect management. Carry out audits, inspections, measurements and test in a timely and effective manner. Propose and implement robust and cost-effective solutions and improvements within Quality. Evaluate and recommend new technologies and tools within quality engineering. Develop relationships within all departments, suppliers and customers. Control process control. Customer performance monitoring and reporting. Process data, trends and issues. APQP Support with NPI Projects. Customer PAPP. Gather information and report giving feedback. Document control. Internal process and system audits. Education: Minimum of BTEC Ideally a HNC in Engineering/Science Experience of Quality Tools (8D, FMEAs, PPAP and SPC) Computer Literate & Excellent communication skills Ideally Lean trained Experience within a Precision Engineering environment Minium of ISO9001 Ideally 14001 & 45001 Audit experience Ideally have working Lean knowledge within Six Sigma. TPBN1_UKTJ

KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking a Survey CAD Modelling Technician. This role focuses on supporting the survey engineers, by processing raw data gathered from site surveys and completing survey modelling requests. The role will have a particular focus on processing laser scanner surveys. The ideal candidate will have significant experience operating 2D and 3D CAD programmes, and an understanding of surveying and the construction industry. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role. Your team Location: Devonport Dockyard, Plymouth Contract: Permanent, 42.5 hours a week Making Possible In this role as Survey CAD Modelling Technician, you will be working in a live MOD facility. Your day-to-day tasks will include: Verify and process survey data from field surveyors. Process total station surveys to report on constructions stages Process laser scanning surveys. Clean and model surveys to determine if construction tolerances have been met Ensure survey data is collected and recorded accurately, following project QA/QC standards Provide drawing and modelling services from survey or design data to support the survey, engineering and construction teams Assist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reporting Manage and archive survey files and records to support project compliance and audits, using the Projects Document Management system Support the Business Systems Manager and wider Business Excellence team as required This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given What do you bring to the role? Essential: Degree, diploma, or relevant qualification in Civil Engineering, Surveying, Architecture, or Construction Strong skills in AutoCAD (Civil3D) and Revit Considerable years of experience in a similar position within the construction industry Knowledge of BIM or digital construction processes Understanding of document control and reporting requirements Strong attention to detail and organizational skills Excellent communication and teamwork abilities CSCS Card and relevant site safety qualifications Member of the CinstCES (or technical member working towards full member), or another body Site based role, hybrid or home based role will be considered Desirable: Experience with survey processing software; Leica Infinity/Leica Cyclone 3D Familiarity survey equipment; total stations, GPS/GNSS and laser scanners Understanding of QC1 procedures and quality documentation in a civils context Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. TPBN1_UKTJ

BSNI have fantastic opportunities for our Manufacturing client based in Ballymena for Production Operatives!.Flexibility is required to complete overtime on Saturdays.To participate in all aspects of the Operational Excellence approach.To operate as part of the team to achieve the adherence to the d

Could you help two young men live gloriously ordinary and extraordinarily meaningful lives? Every day should be filled with the things that matter most: friendship, laughter, choice, new experiences, and feeling part of your community.We're looking for caring, thoughtful people to join our small

Counterbalance Forklift Production Line Operatives Earn £14-15 per hour Looking for a role that combines forklift skills with production line or Canning line experience? We are hiring Counterbalance Forklift Production Line Operatives for immediate starts with a leading client in Bedford! What You

During your employment you must maintain your fitness and ability to work in controlled environments. Deliver safe operations by working in accordance with the Safe System of Work documentation and follows approved operating and company procedures.

Maybe one sleep-in a month at £63 per night.UK Manual Driving licence essential.WE ARE UNABLE TO OFFER SPONSORSHIP WITH THIS POSITION.Benefits of joining or team click apply for full job details.

As our operational complexity grows, tight control of inventory, accurate stock handling, and smooth logistics flow become critical. We are therefore looking for a Senior Warehouse Operative based at our Service Centre in Crawley to strengthen the day-to-day control of our warehouse and logistics op

Workwise App: Take control of your schedule with our Workwise app – manage your availability and easily book shifts on your terms.

Adecco is recruiting for an Assistant Finance Business Partner to work with the West Yorkshire Police Force in Wakefield.This role plays a vital part in bridging finance and various departments, aiming for financial efficiencies and robust service delivery.You will support leadership teams, manage p

Some roles are just jobs these change lives.On the tough days, youll be the reason a young person feels safe.On the good days, youll see real progress happen because you showed up.You will play a real part in helping young people find stability, rebuild trust and move forward - whilst building a ca

About Dimensions Your wellbeing matters.From health support to flexible working, we provide the tools and culture to stay balanced, healthy, and at your best, both inside and outside of work.Thanks to our amazing teams, Dimensions Group has been accredited as a Great Place to Work for 2026 — our e

Seeking a punctual, reliable, and flexible Production Operative for a food manufacturing company in Boston, working day or night shifts on a 2-2-3 schedule.

Greets visitors, manages calls, arranges meetings, handles mail and supports office administration.

My client is currently looking for a Production Operative to join their manufacturing team.This is a hands-on role within a fast-paced production environment, supporting the manufacture of high-quality gas cylinders to exacting standards.Working a 3 rotating shift days afternoons & nights.Operating

Production Operative needed for a full-time, permanent role in Chichester.Duties include packing, operating machinery, and maintaining high hygiene standards.

Production operative needed to weigh, manufacture, quality check, label, and pack products in a clean room.Requires experience and attention to detail.

Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today.Labelling, decanting, quality checks.

Join Our High -Tech Print Production Team – Permanent & Temporary Opportunities Available.Bluetree Group are the fastest growing print business in the UK, priding ourselves on delivering high quality printed products to customers faster than anyone else through our online brands instantprint & Rou

Seeking a Production Operative for a food manufacturing company in Boston, working a 2-2-3 shift pattern.Requires punctuality, reliability, and flexibility.

Greets visitors, handles inquiries, manages records, and assists with office duties.Requires excellent communication and organizational skills.

At Job&Talent, we are recruiting for Production Operative to work with a leading company in the food manufacturing sector in Linton.You will be working for the client in Linton.As a Production Operative you will need to have:.Own transport is required due to the site's location.

Greets patients, manages patient flow, and provides administrative support to clinicians in a healthcare setting.