Offres compliance engineer à SheffieldCréer des alertes d'emploi

Elevation Recruitment Group are delighted to be working with a leading manufacturing business to recruit a Quality Engineer. This is an excellent opportunity to join a well-established organisation committed to operational excellence, continuous improvement and delivering high-quality products to customers worldwide. \n If you're passionate about quality, enjoy solving problems and want to influence business performance through robust quality processes, we'd love to hear from you. This is a fantastic opportunity for someone with some customer facing quality experience who is looking for long term development. \n As the Quality Engineer, you'll be responsible for ensuring products and processes consistently meet customer and business quality standards. Working cross-functionally with Operations, Engineering, Supply Chain and Production teams, you'll identify improvement opportunities, lead problem-solving activities and support a culture of continuous improvement. Duties & responsibilities: \n\n • Analyse quality performance and non-conformance data to identify trends and drive continuous improvement initiatives.\n, • Lead structured problem-solving activities using quality tools including 8D, A3 and 3C methodologies.\n, • Support New Product Development (NPD) and business improvement projects by providing quality engineering expertise.\n, • Maintain and continuously improve the company's ISO 9001:2015 Quality Management System.\n, • Lead supplier quality audits and work collaboratively with suppliers to improve performance.\n, • Coordinate external customer and certification audits, ensuring effective closure of corrective actions.\n, • Partner with Supply Chain teams to resolve supplier and component quality issues.\n, • Develop, monitor and analyse quality KPIs to improve performance, reduce waste and lower the cost of poor quality.\n, • Promote a culture of quality, compliance and continuous improvement throughout the business.\n\n I'm keen to speak to Quality Engineer's with the following experience: \n\n • Experience of working in quality within manufacturing \n, • Strong working knowledge of ISO 9001:2015 Quality Management Systems.\n, • Experience leading internal, supplier and external audits.\n, • Proven experience using structured problem-solving methodologies including 8D.\n, • Experience of supporting New Product Development activities.\n, • A data-driven approach with the ability to analyse trends and identify improvement opportunities.\n

Job Title: Electrical Design EngineerLocation: South Yorkshire (UK wide travel)Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions.About the Role\n\n • Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages)\n, • Select appropriate control, measurement, and electrical hardware based on customer requirements\n, • Produce electrical schematics, technical documentation, test plans, and commissioning documentation\n, • Build, test, troubleshoot, and commission electrical systems\n, • Support on-site installation and commissioning across customer sites\n, • Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements\n, • Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions\n, • Participate in hardware design reviews and resolve technical issues across electrical and control systems\n, • Support supplier selection, component integration, and proof-of-concept activities\n, • Deliver projects on time, within budget, and to customer expectations\nAbout You\n\n, • Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline\n, • Experience designing electrical or control systems\n, • Proficient with EPLAN, AutoCAD Electrical, SolidWorks Electrical, or similar schematic design software\n, • Hands-on experience with electrical system build, testing, fault finding, and commissioning\n, • Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation\n, • Good understanding of EMC principles and practical electrical design\n, • Knowledge of CE/UKCA compliance and electrical design standards\n, • Strong problem-solving skills with the ability to work across multidisciplinary engineering teams\n, • Willingness to travel to customer sites across the UK (approximately 30-50%)\nDesirable Skills\n\n, • Functional safety or safety instrumented systems (e.g. IEC 61508)\n, • ATEX or hazardous area design experience\n, • Basic mechanical design for control panels and enclosures\n, • National Instruments (NI) hardware or software experience\n, • PLC programming or modification\n, • 18th Edition qualification\n, • Experience with safety PLCs or SISTEMA\n Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.

JLL empowers you to shape a brighter way .Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward.Electrical EngineerBased - Rotherham, South Yorkshire. S60 (on client site Rolls-Royce)Hours: 40hrs Monday - FridayWhat this job involves :As an Electrical Engineer at JLL, you'll be part of a team that's shaping a brighter way for our client Rolls-Royce and fellow employees. You'll apply your expertise to design, install, and maintain electrical systems in various commercial and industrial settings. We believe in empowering our team members to thrive, and in this role, you'll have the opportunity to innovate and collaborate with colleagues locally and across the globe. Your work will directly impact the comfort and efficiency of our clients' spaces, contributing to JLL's commitment to creating optimal work environments.What your day-to-day will look like:Maintenance, troubleshooting and repair of low voltage electrical systems, including but not limited to lighting, power distribution, fire alarm systems, security systems, emergency lighting, and access control.Testing and Inspection: Conduct regular testing and inspection of low voltage electrical systems to ensure compliance with industry standards, safety regulations, and relevant codes. Complete necessary documentation and reports accurately.Fault Diagnosis and Repair: Identify, troubleshoot, and resolve faults in low voltage electrical systems, using appropriate diagnostic tools and techniques. Carry out repairs and replacements as necessary to ensure uninterrupted functionality.Preventive Maintenance: Carry out planned preventive maintenance tasks to minimize equipment downtime, increase system reliability, and extend the lifespan of low voltage electrical systems. Create and maintain maintenance schedules.Compliance and Safety: Adhere to all health, safety, and environmental policies and procedures. Comply with electrical regulations, codes, and standards to ensure safety and minimize risks. Report any hazards or incidents promptly.Collaboration: Collaborate effectively with other team members, contractors, and clients to achieve project goals and customer satisfaction. Provide guidance and support to junior team members when required. Documentation andReporting: Maintain accurate records of all work performed, including maintenance logs, inspection reports, work orders, and equipment inventory. Ensure that relevant documentation and records are up to date.Requirements:C&G Level 2 and 3 Diploma Electrical Installation (Or Equivalent)C&G 2360 Parts 1 & 2 (Test & Inspection cert preferred)18th editionStrong Electrical & HVAC experienceKnowledge of heating and air conditioning systemsKnowledge of building fabric and experience in carrying out basic fabric reactive repairs when requiredSound understanding and experience of meeting Health & Safety obligations about maintenance activitiesMust be prepared to work out of hours when requiredOn call one in five weeks (allowance paid), JLL transport providedHave good communication and organisation skillsHave a positive 'can do' attitudeMust have a full UK driving licenseAbility to work on own or as part of a teamAt JLL, we embrace more innovative ways of working and prioritise opportunities to strengthen and advance your career within the UK and beyond. We support each other's wellbeing and champion inclusivity and belonging across teams. What sets JLL apart is our culture of collaboration, both locally in the UK and across the globe. Join us in taking the more inspiring, innovative, and optimistic path on our journey toward success as a Electrical Engineer in Rotherham.#LI-DW2Location:On-site -Rotherham, GBRIf this job description resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table!At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing.JLL Privacy NoticeJones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely.For more information about how JLL processes your personal data, please view our Candidate Privacy Statement .For additional details please see our career site pages for each country.Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL.TPBN1_UKTJ

Elevation Recruitment Group are supporting a leading aerospace manufacturer in Sheffield as they look to recruit an experienced Quality Engineer on an 18-month fixed-term contract. \n This is a fantastic opportunity to join a well-established engineering business with a strong reputation for quality and innovation. Working as part of a collaborative quality team, you'll play a key role in supporting customers, driving continuous improvement, and ensuring products meet the highest industry standards. What you'll be doing:\n\n • Managing customer quality requirements and acting as a key quality contact.\n, • Investigating non-conformances using structured root cause analysis tools such as 8D and 5 Whys.\n, • Supporting internal, customer and third-party audits.\n, • Driving continuous improvement activities to reduce defects and improve processes.\n, • Reviewing quality data, analysing trends and implementing corrective actions.\n, • Supporting new product introductions, including APQP, PPAP and FAIR activities where required.\n, • Working closely with production, engineering, suppliers and customers to resolve quality issues.\n, • Ensuring compliance with AS9100 and customer-specific requirements.\nWe're looking for:\n\n, • Previous experience in a Quality Engineer role within aerospace or another highly regulated manufacturing environment.\n, • Good understanding of quality management systems, ideally AS9100.\n, • Experience of customer-facing quality activities.\n, • Strong problem-solving skills with experience of quality tools such as 8D, Root Cause Analysis and FMEA.\n, • Internal auditing experience would be advantageous.\n, • Excellent communication skills and the ability to build relationships across all levels of the business.\nWhat's on offer:\n\n, • Competitive salary.\n, • 18-month fixed-term contract with an established aerospace manufacturer.\n, • Attractive benefits package.\n, • Opportunity to work on complex, high-value engineering projects.\n, • Supportive team environment with exposure to a wide range of quality improvement initiatives.\n\n If you're a proactive Quality Engineer looking for your next challenge within aerospace manufacturing, we'd love to hear from you. Apply today or contact Elevation Recruitment Group for a confidential discussion.

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company \n Job Title: Electrical Controls & Instrumentation Engineer \n Job Purpose \n To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site \n Key Responsibilities \n 1. Asset Reliability & Maintenance \n\n • Deliver high levels of plant availability through effective maintenance of instrumentation and control systems.\n, • Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers).\n, • Support reliability-centred maintenance (RCM) and predictive maintenance initiatives.\n, • Provide rapid fault diagnosis and resolution to minimise production downtime.\n\n 1. Control Systems & Automation \n\n • Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations.\n \n, • Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc \n \n, • Support and enhance automation systems for:\n \n, • furnace processes\n, • Fault diagnosis within the site for controls, instrumentation and combustion \n \n, • Ensure robust control logic, interlocks, and safety systems are maintained.\n\n 1. Continuous Improvement \n\n • Identify opportunities to improve process stability, yield, energy efficiency, and product quality.\n\n 1. Projects & Engineering Development \n\n • Support capital projects, upgrades, and plant modifications.\n, • Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS).\n, • Supervise installation and commissioning activities, including loop checks and SAT/FAT testing.\n\n 1. Health, Safety & Environmental Compliance \n\n • Ensure all systems comply with company Zero Harm safety culture.\n, • Participate in risk assessments such as HAZOP, SIL verification, and FMEA.\n, • Ensure compliance with COMAH regulations and other UK industry standards.\n, • Promote safe working practices in a heavy industrial environment.\n\n 1. Stakeholder Collaboration \n\n • Work closely with operations, mechanical, and electrical teams to support production targets.\n, • Liaise with OEMs, contractors, and engineering partners.\n, • Provide technical guidance and mentorship to technicians and apprentices.\n\n 1. Documentation & Governance \n\n • Maintain accurate maintenance records, calibration certificates, and engineering documentation.\n, • Ensure compliance within company standards and audit requirements.\n\n Skills & Experience \n Essential Technical Skills \n\n • Strong experience with:\n \n, • PLC programming (Siemens, Allen-Bradley) would be advantageous\n, • Burner Management identification and finding \n, • Distributed Control Systems (ABB, Honeywell, etc.)\n, • SCADA systems\n, • SAT and TUS experience would be advantageous \n \n\n Desirable \n\n • Experience within steel or heavy industry (e.g., metals, energy, petrochemical).\n, • Exposure to high-temperature or continuous manufacturing processes.\n, • Knowledge of drives, motors, and process automation in the heavy engineering industry \n\n Qualifications \n\n • A relevant qualification (or equivalent experience) in:\n \n, • Control & Instrumentation Engineering\n, • Electrical/Electronic Engineering\n \n

Are you a customs and excise expert with strong HMRC knowledge? Do you thrive on ensuring compliance while driving operational efficiency? Ready to take ownership of bonded operations in a dynamic logistics environment? \n \n Here at GXO, we’re looking for a knowledgeable and driven Compliance Manager to join our multi-user site in Rotherham. Acting as the site’s subject matter expert, you’ll be responsible for all customs and excise activities, ensuring full compliance with HMRC regulations while supporting operational excellence across bonded goods movement. \n \n This is a key leadership role where you’ll influence processes, develop teams, and maintain the highest standards of compliance, accuracy, and control. \n \n This is a full-time, permanent position. You will work Monday to Friday, 08:00 till 16:00. \n \n Pay, benefits and more: \n \n We’re looking to offer a salary of up to £42,000 per annum depending on experience and 25 days annual leave (plus bank holidays). Your benefits package includes a company sponsored pension scheme, private medical & dental insurance, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You’ll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! \n \n What you’ll do on a typical day: \n \n\n • Oversee customs and excise compliance, ensuring adherence to HMRC regulations and approvals\n, • Manage bonded goods processes including goods-in, stock management, and dispatch\n, • Lead, coach, and develop the bond team, driving performance and capability\n, • Ensure accurate and timely submission of excise declarations and reporting\n, • Drive continuous improvement of SOPs, compliance processes, and operational standards\n\n \n What you need to succeed at GXO: \n \n\n • In-depth knowledge of HMRC excise legislation and customs procedures\n, • Proven experience working in a duty-suspended/bonded environment\n, • Strong analytical and Excel skills, with attention to detail\n, • Excellent communication and stakeholder management capabilities\n, • Demonstrated leadership, problem-solving, and decision-making skills\n\n \n We engineer faster, smarter, leaner supply chains. \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Join a leading independent technology and services provider as an OpenSource Data Platform Solution Engineer. \n Job Overview:Looking for a hands-on Solution Engineer / Architect to design and support large-scale cybersecurity data platforms using open-source technologies. \n Location: Sheffield \n Rate: A daily rate, in-scope IR35 £530 per day (via a Hays Approved Umbrella Company). \n Work Schedule: 3 days onsite/week \n Team: Strategy and Governance, Cyber Sciences and Analytics, Cybersecurity \n Key Responsibilities: \n\n • Design end-to-end technical solutions for cybersecurity applications\n, • Work on large-scale (petabyte) data platforms\n, • Create architecture documents (HLDs / LLDs)\n, • Evaluate and standardise open-source technologies\n, • Collaborate with engineering and governance teams\n, • Ensure solutions meet security, compliance, and regulatory standards\n\n Key Skills Required: \n\n • Experience in solution design / architecture\n, • Strong background in big data tools (Spark, Airflow, Trino, etc.)\n, • Knowledge of cloud platforms (AWS / Azure / GCP)\n, • Understanding of cybersecurity principles (IAM, encryption, secure design)\n, • Ability to work hands-on when required (coding / troubleshooting)\n\n Ideal Candidate: \n\n • Experience working on large-scale data platforms\n, • Strong communicator and team player\n, • Interest or experience in cybersecurity\n\n Additional Information: \n Interview Process: In Person / Teams \n How to Apply:If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Project Engineer – Gas SectorHome-Based with travel across the UKPermanent | Competitive Salary + Benefits \n Join a leading force in the gas industry, delivering safe, innovative, and technically advanced energy solutions across the UK. \n The OpportunityA skilled and motivated Project Engineer is required to join a dynamic engineering team working across gas infrastructure projects nationwide. Reporting to the Head of Engineering, the successful candidate will manage projects from feasibility through to commissioning, ensuring technical integrity, safety compliance, and commercial success. \n This is a key role with exposure to all stages of project development — from design and planning to on-site delivery and stakeholder management. \n Key Responsibilities \n Project Delivery \n\n • Lead full-cycle delivery of gas infrastructure projects, including installations\n, • Maintain detailed project plans, budgets, and timelines\n, • Coordinate with internal teams, contractors, suppliers, and regulatory bodies\n\n Engineering & Design \n\n • Prepare functional specifications, drawings, and supporting documentation\n, • Perform engineering calculations to recognised industry standards\n, • Review and approve contractor designs and submittals\n\n Compliance & Safety \n\n • Ensure all works comply with relevant UK codes and safety regulations\n, • Participate in hazard and risk reviews\n, • Support permit allocation and regulatory documentation\n\n Installation & Commissioning \n\n • Oversee site installation and commissioning activities\n, • Conduct inspections, testing and site troubleshooting\n, • Provide technical support during startup and project handover\n\n Stakeholder Engagement \n\n • Liaise with customers, authorities, and third parties\n, • Provide technical updates and reporting\n, • Contribute to bid and proposal preparation with engineering input\n\n What we’re looking for \n\n • Recognised project management qualification (e.g. PRINCE2, APM) or suitable experience\n, • Previous experience in project engineering (gas distribution or transmission, LPG, oil & gas, or similar)\n, • Strong working knowledge of gas flow systems and technology\n, • Skilled in CAD, MS Project, and relevant engineering tools\n, • Excellent communication and reporting skills\n, • Willingness to travel\n, • Full UK driving licence\n\n What’s On Offer \n Competitive salary and benefits packageCareer development in a high-growth, technical environmentSupportive and collaborative engineering teamEngaging projects focused on safety, efficiency, and sustainabilityReal opportunity to contribute to the UK’s energy transition

We are delighted to be supporting a Sheffield based, international manufacturing business with the recruitment of a Software Engineer – Embedded Systems. \n Reporting to the Senior Electronics Design Engineer, your role includes the design, development and testing of software development and maintenance. You will identify issues and work collaboratively with engineers, product managers and other stakeholders (internally and externally) to support continuous improvement of existing products and processes. \n You should be a practical, curious software engineer who enjoys solving real problems and learning new things as requirements evolve. \n The role: \n\n • Develop, Maintain and problem solve the current aspects of software within the current product portfolio and future products.\n, • Reduce time to market of new features, on time delivery\n, • Improve response to failures/bugs\n, • Produce maintainable, well-structured and well-documented code\n, • Backend development\n, • Frontend/UI work\n, • Integrations and APIs\n, • Automation and tooling\n, • Cloud/infrastructure tasks\n, • Embedded software and firmware development\n, • Helping shape technical decisions\n, • Working closely with Hardware, including microcontrollers, device communication and low level systems.\n\n You: \n\n • Degree in Software Engineering, Electronic Engineering, or a related technical discipline\n, • solid programming fundamentals\n, • modern web technologies and UI frameworks\n, • Python, C/C++, JavaScript and/or similar languages\n, • Git and collaborative development workflows\n, • databases and APIs\n, • cloud platforms\n, • embedded systems or firmware development\n, • interest in both software and hardware environments\n, • able to work independently and figure things out\n, • comfortable working across different parts of a system\n, • strong problem-solving skills\n, • A good communicator at all levels with the proven ability of working as part of a team.\n, • Exceptional analytical and proven solving skills\n, • Self-motivated\n, • Good time management with the ability to focus on task completion.\n, • Experience of working in organisations with ISO9001 quality management systems.\n, • Good understanding of compliance related aspects of product software\n\n Please apply for immediate consideration

Maintenance Team Leader\n Rotherham3 Shift Pattern | Monday - Friday (Mornings, Afternoons & Nights)Up to £55,000 \n Our client, a leading manufacturing business based in Rotherham, is seeking an experienced Maintenance Team Leader to join their engineering team. This is an excellent opportunity for a hands-on engineering leader to take responsibility for driving maintenance performance, leading a skilled team, and ensuring maximum equipment reliability within a fast-paced production environment. Key Responsibilities\n\n • Lead, motivate and support a team of multi-skilled maintenance engineers across the shift.\n, • Plan and coordinate preventative and reactive maintenance activities to minimise downtime.\n, • Provide hands-on support with mechanical and electrical fault finding when required.\n, • Drive continuous improvement initiatives to improve plant reliability and performance.\n, • Ensure maintenance work is completed safely, efficiently and to a high standard.\n, • Monitor team performance, allocate workloads and support the development of engineers.\n, • Liaise closely with production and other departments to ensure engineering priorities are met.\n, • Maintain accurate maintenance records and ensure compliance with health and safety procedures.\nRequirements\n\n, • Previous experience in a Maintenance Team Leader, Engineering Supervisor or Senior Maintenance Engineer position.\n, • Strong mechanical and/or electrical maintenance background within a manufacturing or industrial environment.\n, • Proven leadership experience with the ability to motivate and develop engineering teams.\n, • Excellent fault-finding and problem-solving skills.\n, • A proactive approach to continuous improvement and maintenance best practices.\n, • Willingness to work a rotating three-shift pattern (Monday-Friday).\n\n \n If you feel this is of interest please send your CV directly to dan at Daniel.Rose @ Cvtechnical.co.uk or call for a confidential discussion on

\n \n \n Principal Engineer \n \n We're looking for civil, structural and/or geotechnical engineers to join our team in various locations around the UK. \n Locations: Birmingham / Bristol / Cambridge / Cardiff / Glasgow / Leeds / Liverpool / London / Manchester / Newcastle / Norwich / Plymouth – agile working, with up to 1-2 days per week from home if desired \n Hours: 40 hours per week – flexibility on hours available if desired \n Salary: Starting from £60k per annum \n Sector: Working across all sectors of the built environment \n \n Join us as a Principal Engineer and become part of one of the UK's leaders in temporary works design and management and construction-related technical services. As part of our 100-strong team, you'll get to work on hundreds of projects across one of the most diverse and high-profile portfolios in the country, with access to Kier's £11bn+ project pipeline – supporting complex construction and major infrastructure schemes from concept through to delivery. \n Are you… \n \n • Practically-minded, with a strong grounding in civil, structural and/or geotechnical engineering principles and knowledge of applicable design standards?\n, • A Chartered Engineer (CEng) or of equivalent experience?\n \n Do you… \n \n • Enjoy applying first principles thinking to real-world construction challenges, combining a keen eye for detail with sound engineering judgement, a focus on safety, buildability, sustainability and a flair for innovation and creative problem-solving?\n, • Have experience of temporary works design and/or management, or other practical construction experience?\n, • Have strong organisational and communication skills, and enjoy working as part of collaborative teams?\n, • Want to join a top-25 engineering consultancy, recognised as a one of Glassdoor's 50 best places to work?\n \n What will you be responsible for? \n Leading the delivery of a broad range of complex construction engineering services, including some or all of: temporary works design and checking, reviewing permanent designs for compliance and buildability, supporting tenders and preconstruction planning, and providing technical support to overcome construction-stage and post-construction issues and defects. \n Main responsibilities \n \n • Acting as Project Lead for multiple complex projects, managing technical scope, programme, budget and relationships with preconstruction and construction teams, from bid through to delivery\n, • Producing, checking and reviewing design outputs such as calculations, sketches, drawings, 3D models, reports and risk assessments, ensuring compliance with CDM, SHE procedures and QA processes\n, • Developing yourself, other individuals and the wider team, contributing to the continuous improvement of processes and systems, enabling the business to adapt to current and future challenges.\n \n \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier. \n #LI-MA1 \n \n \n \n

Civil Engineering & Design Engineer (HV Infrastructure) Can be Based; Sheffield, Nottigham, Cambridge and surrounding areas £50,000 - £60,000 + Hybrid Working + Matched Pension + Life Assurance + Enhanced Family Leave + Buy/Sell Holidays + 24/7 GP Service + Employee Wellbeing Programme Are you a Civil or Structural Engineer with experience in utilities, power infrastructure or substation design? Do you want to be part of delivering major HV grid connection projects supporting the UK's renewable energy and infrastructure development? This company is a specialist engineering and infrastructure delivery organisation operating within the high voltage power and utilities sector. They design and deliver complex electrical infrastructure projects including substations, cable systems and overhead line networks across the UK. In this role, you will be responsible for delivering civil and structural design work across HV/MV/LV infrastructure projects. This will include substation layouts, foundations, cable routes, drainage systems, access roads and structural steel designs. You will work closely with electrical engineers, project managers and construction teams to ensure all designs are technically robust, compliant and buildable, supporting projects through the full lifecycle from concept through to construction and commissioning. The ideal candidate will have experience in civil design within the utilities or energy sector, with strong knowledge of substation or infrastructure projects and an understanding of multidisciplinary engineering coordination. This is an excellent opportunity to join a growing organisation offering long-term development, exposure to major infrastructure schemes and the chance to progress within a highly technical environment. The Role: Civil and structural design of HV substation and infrastructure projects Design of foundations, cable routes, drainage and access systems Production of CAD drawings, calculations and technical documentation Coordination with electrical and engineering teams Support during construction and commissioning phases Review of contractor and vendor submissions Ensuring compliance with CDM regulations and industry standards The Person: Civil or Structural Engineering degree Experience in utilities, substation or power infrastructure design Knowledge of civil design software (AutoCAD, Civil 3D, STAAD, SAP2000 etc.) Strong understanding of geotechnical and structural principles Ability to work within multidisciplinary engineering teams Strong attention to detail and problem-solving ability Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Due to continued business growth, we are looking to recruit a number of experienced Design Engineers to join a leading business in the Sheffield area. This is a full time permanent opportunity with an industry leader in their field. We are looking for candidates with minimum 7 – 10 years experience in industry looking for their next move – whether it be Senior Mechanical, Lead Mechanical or Principal Mechanical Engineer – there is a position for you based on your experience. The role will involve design and development of components used in a range of sectors including Nuclear, Defence, Rail, Oil and Gas and Subsea applications. You responsible for delivering high-quality engineering design, analysis, and documentation for projects with design-based scopes of work. The role involves contributing to all stages of the engineering lifecycle—from concept development through detailed design and implementation—while ensuring compliance with applicable standards and best practice Candidates will ideally be degree level in a relevant Mechanical engineering discipline however those with demonstrable experience who are HNC/ HND qualified will also be considered. Engineers with CEng/ Chartered status would be also be highly advantageous Candidates will also ideally have a demonstrable background in design and development of larger fabricated/ machined components products. Experience with Autodesk Inventor is ideal. Hours – Mon – Thurs 8 – 4.30 Mon – Thurs /8 – 2 Friday RESPONSIBILITIES Participate actively in project planning, scope definition, and engineering execution strategy. Organise and prioritise own workload, and meet planned deadlines Contribute to and, where appropriate, lead engineering design review meetings, ensuring the technical integrity of all outputs. Coordinate with multidisciplinary teams to integrate mechanical designs within broader project objectives. Produce and verify a range of engineering deliverables, including but not limited to: Detailed design drawings and general arrangement drawings (2D and 3D). Engineering calculations supporting design decisions and compliance verification. Computer-based analyses such as Finite Element (FE) modelling, structural integrity assessments, and thermal or fluid simulations. Technical documentation, including risk assessments, bills of materials (BoMs), and material specifications. Engineering reports summarizing design intent, analytical outcomes, and design verifications. Review and verify the work of other engineers or designers using first principles, design standards, and appropriate codes of practice (Type A and Type B standards). Ensure designs meet safety, functionality, and cost-effectiveness requirements. Provide support and guidance to the Mechanical Engineers, Mechanical Designers, and Apprentices. HEALTH & SAFETY It is your responsibility to work in a safe manner to promote personal safety and the safety of others to prevent accidents occurring and report all near misses. Move materials safely and carefully using the correct mechanical lifting method. Use the appropriate PPE and ensure it is in good condition, replace when required. Follow the company’s Health & Safety Policy at all times. KNOWLEDGE & SKILLS Degree in Mechanical Engineering or a closely related discipline. Candidates holding an HNC/HND in a relevant field may be considered for Project Engineer roles, subject to the Engineering Director’s review to ensure sufficient theoretical and analytical competence. Minimum of 7 years of post-graduate industrial experience (for Senior Engineers) in a mechanical engineering or design-based environment. Proven ability to develop and deliver engineering solutions from initial requirements to fully detailed design. Demonstrable experience in the following areas: Application of engineering codes of practice and Type A/B standards. Use of engineering models and drawings to communicate design intent (software training available in the company’s preferred design suite). Verification and validation of design work, including peer reviews and calculations. Understanding of manufacturing processes such as planning, raw material preparation, plating, welding, machining, finishing, and assembly. Preparation of risk assessments and technical specifications. Strong analytical and problem-solving abilities with a sound grasp of engineering fundamentals. Competent in Microsoft Office applications (Word, Excel, PowerPoint, and Outlook). * Familiarity with CAD and FEA tools

We're Hiring: Electrical Maintenance Engineer 🚨 🔧⚡ 📍 Sheffield 🕒 Monday – Friday | 08:00 – 17:00 We're looking for an experienced Electrical Maintenance Engineer to join our Facilities Management team on a static industrial site in Sheffield. This is a fantastic opportunity for a proactive, self-motivated engineer who enjoys working independently while building strong relationships with customers. As the dedicated on-site engineer, you'll be the main point of contact, ensuring electrical systems are maintained to the highest standards through planned preventative maintenance and reactive repairs. ⚡ What you'll be doing: 🔧 Carrying out planned preventative maintenance (PPM) on electrical systems and equipment ⚙️ Diagnosing electrical faults and completing reactive maintenance efficiently 🛠️ Performing repairs to minimise downtime and maintain site operations 🤝 Acting as the main customer contact on-site, providing excellent service and communication 📋 Completing maintenance records and ensuring all documentation is up to date 🦺 Working safely and ensuring compliance with all Health & Safety procedures 🏭 Taking ownership of a static site and managing your workload independently 👷 What we're looking for: 🔹 Experience carrying out electrical maintenance in an industrial, manufacturing, or commercial environment 🔹 Strong knowledge of planned preventative maintenance (PPMs) and reactive maintenance 🔹 Excellent fault-finding and problem-solving skills 🔹 Ability to work independently with minimal supervision 🔹 Strong communication skills and confidence in a customer-facing role 🔹 Relevant electrical qualifications 💼 What's on offer: 🕒 Monday to Friday working hours – enjoy a great work-life balance 📍 Static site role – no travelling between sites 🚗 No company van required 📈 Long-term career opportunity within a supportive Facilities Management team 🎓 Ongoing training and development opportunities 🔒 Permanent position with excellent career prospects ⚡ If you're an experienced Electrical Maintenance Engineer looking for a stable, customer-facing role where you can take ownership of a site, we'd love to hear from you

Independent Forgings and Alloys (IFA), one of Europe's leading aerospace forging and precision manufacturing companies, is expanding and looking to recruit a Lead Quality Engineer to join its Sheffield-based team. This is an excellent opportunity for a Lead Quality Engineer to join a highly respected aerospace manufacturing organisation. Working across Quality, Manufacturing, Engineering and Metallurgy functions, the successful candidate will play a key role in driving product quality, process capability and compliance across one of the most technically advanced forging operations in Europe. Company Details - Independent Forgings and Alloys Independent Forgings and Alloys Ltd (IFA) sits uniquely as the only single-sited forge with open-die radial, press, hammer & ring rolling and closed-die extrusion, drop stamp and blade forging capabilities in the world. Through extensive forging and manufacturing processes, IFA offers a fully integrated metals service centre from ingot and billet production through to fully tested and released machined products. As a key supplier into the global aerospace sector, IFA manufactures critical forged components for some of the world's most demanding aerospace applications, operating to the highest standards of quality, compliance and manufacturing excellence. Job Vacancy As the Lead Quality Engineer, you will be based at the Sheffield manufacturing facility, taking ownership of key quality engineering activities across aerospace manufacturing operations. You will work closely with Production, Engineering and Metallurgy teams to ensure product conformity, resolve quality issues and drive continuous improvement initiatives. The role will focus on root cause analysis, non-conformance management, process capability improvement, audit support and ensuring compliance with aerospace customer and regulatory requirements. You will act as a key technical quality authority within the business, supporting both reactive problem-solving and proactive quality improvement activities. Key Responsibilities Lead and support investigation of internal manufacturing non-conformances and quality issues Conduct root cause analysis and implement effective corrective and preventive actions Drive improvements in product quality, process capability and manufacturing performance Support and lead quality engineering activities across aerospace manufacturing processes Analyse quality data to identify trends, risks and improvement opportunities Support process validation, control plans and FMEA activities Work closely with Production, Engineering and Metallurgy teams to ensure compliance with customer, aerospace and regulatory requirements Support internal, customer and third-party audits, including ISO 9001, AS9100 and NADCAP assessments Develop and maintain quality documentation, procedures and technical standards Support new product introduction and manufacturing readiness activities Lead problem-solving activities using structured methodologies such as 8D and RCCA Support continuous improvement initiatives across manufacturing operations Provide technical support and guidance to production teams on quality-related issues Participate in risk assessments and quality planning activities Carry out any other reasonable duties as requested by management Qualifications and Experience Degree qualified in Engineering, Manufacturing, Quality, Materials or a related discipline, or equivalent experience Previous experience in a Quality Engineer or Senior Quality Engineer role within aerospace or regulated manufacturing Experience investigating non-conformances and leading corrective action activities Strong root cause analysis and structured problem-solving skills Experience working with engineering drawings, specifications and technical documentation Knowledge of quality tools such as 8D, FMEA, PFMEA, SPC, APQP and RCCA Strong understanding of manufacturing processes, preferably forging, metals, machining or special alloys Experience supporting internal and external audits Excellent communication, analytical and stakeholder management skills Ability to influence cross-functional teams and drive quality improvements Lead Auditor qualification or auditing experience would be highly advantageous Salary Information Starting salary between £45,000 - £50,000, depending on experience Permanent position with long-term career opportunities Training and professional development support Opportunity to work within an advanced aerospace manufacturing environment 33 days holiday Pension scheme with employer contribution Bonus scheme and Westfield cash plan On-site parking available Recruitment Process This position is being recruited exclusively by W Talent Recruitment, who will be conducting the first-stage pre-screen interview. Any questions, please contact Glyn Dobb at W Talent directly

Independent Forgings and Alloys (IFA), one of Europe's leading aerospace forging and precision manufacturing companies, is expanding and looking to recruit a Supplier Quality Engineer to join its Sheffield-based team. This is an excellent opportunity for a Supplier Quality Engineer to join a highly respected aerospace manufacturing organisation. Working closely with Procurement, Quality, Manufacturing and external suppliers, the successful candidate will play a critical role in ensuring supplier performance, product quality and supply chain compliance across one of the most technically advanced forging operations in Europe. Company Details - Independent Forgings and Alloys Independent Forgings and Alloys Ltd (IFA) sits uniquely as the only single-sited forge with open-die radial, press, hammer & ring rolling and closed-die extrusion, drop stamp and blade forging capabilities in the world. Through extensive forging and manufacturing processes, IFA offers a fully integrated metals service centre from ingot and billet production through to fully tested and released machined products. As a key supplier into the global aerospace sector, IFA manufactures critical forged components for some of the world's most demanding aerospace applications, operating to the highest standards of quality, compliance and manufacturing excellence. Job Vacancy As the Supplier Quality Engineer, you will be based at the Sheffield manufacturing facility, taking responsibility for managing supplier quality performance across a diverse aerospace supply chain. You will work closely with suppliers and internal stakeholders to ensure purchased products and services consistently meet customer, aerospace and regulatory requirements. The role will focus on supplier development, supplier auditing, non-conformance management, root cause analysis and driving continuous improvement activities throughout the supply chain. You will be a key quality representative within the business, supporting supplier approval, supplier performance monitoring and the implementation of corrective and preventive actions to ensure quality, delivery and compliance objectives are achieved. Key Responsibilities Manage supplier quality performance across the aerospace supply chain Conduct supplier audits, assessments and qualification activities in line with customer and regulatory requirements Support supplier approval and supplier development programmes Drive continuous improvement activities with suppliers to improve quality, delivery and operational performance Investigate supplier-related non-conformances and quality issues using structured problem-solving techniques Lead root cause analysis and corrective action activities with suppliers Monitor supplier KPIs and performance metrics, identifying trends and improvement opportunities Support supplier compliance with ISO 9001, AS9100, NADCAP and other customer-specific aerospace quality requirements Work closely with Procurement, Manufacturing, Engineering and Quality teams to resolve supplier quality concerns Review supplier documentation including quality plans, process controls, FAIRs, certification records and supplier approvals Support customer audits, supplier audits and third-party assessments Participate in supplier risk assessments and performance reviews Develop and maintain supplier quality procedures, processes and documentation Support new supplier on boarding and new product introduction activities Carry out any other reasonable duties as requested by management Qualifications and Experience Previous experience in a Supplier Quality Engineer, Quality Engineer or Supplier Development role Proven experience within an aerospace manufacturing environment is highly desirable Strong knowledge of supplier quality assurance methodologies and quality management systems Experience conducting supplier audits and managing supplier performance Experience investigating non-conformances and implementing corrective and preventive actions Strong root cause analysis and problem-solving skills Knowledge of quality tools and methodologies such as 8D, FMEA, PFMEA, SPC, APQP and RCCA Experience working with engineering drawings, specifications and technical documentation Excellent communication and stakeholder management skills Ability to build strong working relationships with suppliers and internal teams Experience supporting customer audits and regulatory compliance activities would be advantageous Lead Auditor qualification or experience auditing to ISO 9001, AS9100 or NADCAP standards would be advantageous Salary Information Starting salary between £40,000 - £50,000, depending on experience Permanent position with long-term career opportunities Training and professional development support Opportunity to work within an advanced aerospace manufacturing environment 33 days holiday Pension scheme with employer contribution Bonus scheme and Westfield cash plan * On-site parking available Recruitment Process This position is being recruited exclusively by W Talent Recruitment, who will be conducting the first-stage pre-screen interview. Any questions, please contact Glyn Dobb at W Talent directly

Air Conditioning Engineer Location: Chesterfield & Surrounding Areas Salary: Up to £43,000 + Overtime Hours: Monday to Friday | 8:00am – 5:00pm We're recruiting for an experienced Air Conditioning Engineer to join a leading Facilities Management provider covering commercial sites across Chesterfield. This Air Conditioning Engineer role offers the best of both worlds – a mix of mobile working and a key static site, giving you variety without spending all day on the road. The Role PPMs and reactive maintenance Service and fault finding on VRV/VRF, split and CRAC systems Working mainly on Mitsubishi and Daikin equipment Supporting general building services when required Completing service reports and compliance paperwork 1 in 5 call-out rota What We're Looking For NVQ Level 2 Refrigeration & Air Conditioning (or equivalent) F-Gas Category 1 Full UK Driving Licence Previous experience as an Air Conditioning Engineer, HVAC Engineer or Refrigeration & Air Conditioning Engineer Benefits Up to £43,000 salary Company van, tools and uniform Overtime available Double time + day in lieu for bank holidays worked * Long-term career progression If you're an Air Conditioning Engineer looking for a role that combines the stability of a static site with the flexibility of a mobile position, we'd love to hear from you. Apply today for a confidential discussion

Overview: An exciting opportunity has arisen for a Sub Agent to join a leading Tier One civil engineering contractor delivering a major city centre infrastructure and regeneration project in Sheffield. The Sub Agent will take responsibility for managing sections of highways, public realm and drainage works, ensuring safe, efficient and high-quality delivery while coordinating site teams, subcontractors and engineering activities within a live urban environment. Key Responsibilities: Take ownership of a section of works, ensuring delivery in line with programme, budget and quality requirements. Plan, coordinate and supervise site teams, subcontractors, plant and resources to achieve key project milestones. Promote and maintain the highest standards of health, safety, environmental and quality compliance across site. Ensure Risk Assessments, Method Statements (RAMS), Permit to Work systems, site inductions and safety briefings are implemented effectively. Oversee highways, public realm, drainage and associated civil engineering works, ensuring compliance with drawings, specifications and project requirements. Produce and maintain site diaries, progress reports, quality records and project documentation. Monitor programme performance and provide regular progress updates to the Project Manager. Ensure Inspection & Test Plans (ITPs), quality assurance documentation and handover records are completed and maintained. Build strong working relationships with the client, local stakeholders, site teams and the supply chain to ensure successful project delivery. Identify and resolve construction challenges while driving continuous improvement, productivity and programme performance. Qualifications & Experience: Previous experience working as a Sub Agent, Site Agent or Senior Engineer on highways, public realm, infrastructure or heavy civil engineering projects. HNC/HND, NVQ or Degree qualified in Civil Engineering or a related discipline. SMSTS, CSCS Card and IOSH or equivalent health and safety qualification. Experience delivering highways improvements, drainage, earthworks, reinforced concrete, paving or urban infrastructure works. Strong knowledge of programme management, subcontractor coordination, quality assurance, ITPs and engineering documentation. Proven ability to manage sections of work within live construction environments while maintaining safety, quality and programme. Excellent leadership, communication and stakeholder management skills. Proficient in Microsoft Office and project reporting. Full UK Driving Licence. Benefits: Competitive salary with generous annual leave and the option to purchase additional holidays. Company pension, private medical options and Employee Assistance Programme. Cycle to Work scheme, employee share purchase scheme and a range of retail and lifestyle discounts. * Professional membership support, ongoing training and excellent career development opportunities. If you're an ambitious Sub Agent looking to take the next step on a major infrastructure project in Sheffield, we'd love to hear from you

Are you a Medical Sales Representative with medical devices, medical consumables, or medical equipment experience gained in Critical Care, Intensive Care, ICU, Neonatal settings or similar? Interested in developing your sales career within Respiratory Medicine? This is a field-based role, driving consultative sales across a mix of technical consumables & capital equipment. We have some of the very best products, and customer / employee training programmes, available anywhere. BASIC SALARY: £55,000 - £60,000 BENEFITS: · Commission (up to £30,000), paid annually in January. · Company Pension Scheme (minimum employee contribution of 4% & Company will pay 5% and match up to 8%). · Company Car option (up to £860 per month lease price). · 25 Days Annual Holiday. · Group Income Protection Scheme. · Private Healthcare including Optical & Dental. · Life Assurance etc. LOCATION: This is a field-based position, covering the North-East of England and managing a large geographic territory from Newcastle, Scottish Borders, Durham, Middlesbrough, Derby, Nottinghamshire, Leeds, Sheffield, Doncaster, Hull, York, and Harrogate. JOB DESCRIPTION: Territory Sales Manager, Medical Devices Sales Representative - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, ICU, CCU This is a classic Medical Device Territory Manager role, covering a base of hospitals. Selling into ICU, Theatre, Recovery Room, and more. Some sales are won via tenders, others are more ad-hoc. Close clinical and technical support is provided to your prospects and customers from a designated Clinical Nurse Applications Specialist, and a local Field Service Engineer. KEY RESPONSIBILITIES: Territory Sales Manager, Medical Devices Sales Representative - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, ICU, CCU As our Medical Sales Representative, you will: · Take ownership for the achievement of your annual territory sales growth plan. · Drive both the strategy and execution, while mapping out the mechanics of each hospital & customer, to target high-margin business. · Balance 50% new business development and 50% account development. · Maintain commercial, clinical, and technical relationships with existing KOLs and customers, whilst developing sales with the introduction of new customers and products. · Lead from the front in the sales process, including dual-customer visits and managing the tendering process. · Organise and run regular workshops, seminars, exhibitions, and mailings, to develop sales opportunities. · Travel extensively , both in the UK (and occasionally), abroad. PERSON SPECIFICATION: Territory Sales Manager, Medical Devices Sales Representative - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, ICU, CCU You will have: · A proven track record as a Medical Sales Representative, within technical consumables, capital equipment (preferably both), gained within a Critical Care environment. · Ability to articulate key product and market messaging to increasing customer compliance with our technology and driving care strategies to improve patient outcomes. · Ability to build strong relationships fast. · A results-driven approach, with a creative way of developing solutions. · Ability to communicate effectively with all key stakeholders within ICU, Emergency room and wards. · Team-player style, who can work independently and be an entrepreneurial thinker. · Competency with advanced Microsoft: Word, Excel, PowerPoint and Outlook · A full and clean driving license OUR COMPANY: We are a high-quality international branded manufacturer of ground-breaking and highly innovative Medtech product solutions. These solutions have been credited as genuine game-changers within the medical devices and equipment market. Our R&D is constantly driving forward, creating new products which are world-class and cutting edge. The results have led to us winning numerous industry awards. As technology leaders within respiratory medicine, our product range is both established and growing year annually. We are constantly developing our customer channels through targeting new products and winning new clients. Our values include strong ethics, coupled with an emphasis on customer delight. This has resulted in the highest levels of clinical engagement. Our results speak for themselves: world-class manufacturing, premium branding, very high staff retention and fantastic camaraderie! It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Medical Sales Representative, Territory Manager, Medical Sales Executive - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, Anaesthesia, Patient Monitoring, Cardiology, Ventilators, Infusion, CCU, ICU INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18543, Wallace Hind Selection

Engineering & Design Manager (HV Infrastructure) Can be based; Sheffield, Nottingham, Cambridge and surrounding areas £85,000 - £90,000 + Hybrid Working + Matched Pension + Life Assurance + Enhanced Family Leave + Buy/Sell Holidays + 24/7 GP Service + Employee Wellbeing Programme Are you an experienced Engineering Manager or Principal Electrical Engineer with a strong background in HV/MV/LV design and grid infrastructure projects? Do you want to lead a high-performing engineering team delivering complex substation, cable and overhead line projects across the UK energy sector? This company is a leading independent engineering and infrastructure business operating within the high voltage grid connection and utilities sector. They specialise in the design and delivery of complex electrical infrastructure projects supporting the UK's energy transition, including renewable generation, industrial connections and grid reinforcement schemes. In this role, you will take full responsibility for leading the engineering and design function across a portfolio of HV infrastructure projects. You will manage a multidisciplinary team of engineers and designers, ensuring all technical outputs meet client requirements, industry standards and regulatory compliance. You will act as the technical authority for the business, supporting bids, design reviews, stakeholder engagement and project delivery from concept through to energisation. The ideal candidate will have a strong background in HV electrical design (typically up to 132kV or above), proven leadership experience and a strong understanding of UK DNO/TSO standards and grid connection processes. This is a key strategic role within a growing organisation, offering the opportunity to shape engineering standards, influence technical direction and play a major role in future business growth. The Role: Leading and managing the engineering and design team across HV infrastructure projects Overseeing substation, cable and overhead line design activities Reviewing and approving engineering deliverables and technical submissions Acting as technical authority for clients, DNOs, TSOs and internal stakeholders Supporting tenders, bids and project development activities Driving engineering standards, processes and continuous improvement Managing resource allocation and team development The Person: Experience in HV electrical design within utilities, ICPs, EPCs or consultancy environments Strong knowledge of substation, protection and grid connection design principles Proven leadership or engineering management experience Understanding of UK DNO/TSO standards and compliance requirements Strong stakeholder management and communication skills Ability to manage multiple complex projects simultaneously Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Lead PPM Engineer Location: Mobile role Salary: £40,000 – £45,000 per annum Additional Pay: Door-to-door travel pay Job Type: Full-time, Permanent Hours: 42.5 hours per week Department: Engineering Team Reports to: PPM Supervisor Probation Period: 6 months The Role We are looking for an experienced Lead PPM Engineer to join our engineering team on a full-time, permanent basis. This is a mobile role carrying out planned preventative maintenance, compliance works and remedial services across client sites. The successful candidate will lead site visits, work alongside assistant engineers and ensure all work is completed safely, professionally and to the required industry standards. This role would suit someone with experience in fire damper testing, air hygiene, ventilation cleaning, kitchen extract cleaning, TR19 works, fire stopping, fire compartmentation or fire safety remedial works. Key Responsibilities Lead planned preventative maintenance and compliance visits across client sites. Carry out kitchen extract cleaning, ventilation cleaning and ductwork cleaning in line with TR19 and TR19 Grease standards. Complete annual fire damper drop testing in line with BS9999 standards. Carry out fire compartmentation, fire stopping or fire safety remedial works where required. Lead, support and guide assistant engineers while on site. Identify faults, failed dampers, access issues, non-compliance or remedial requirements. Complete accurate job reports, photos, paperwork and compliance evidence. Liaise professionally with clients, site managers and internal teams to ensure smooth delivery of works. Maintain high standards of health and safety, PPE use, site cleanliness and workmanship. What We’re Looking For Experience as a Lead Engineer, PPM Engineer, Fire Damper Engineer, Air Hygiene Engineer, Ventilation Cleaning Engineer, Fire Stopping Engineer or similar. Experience carrying out planned maintenance, compliance works or remedial services on client sites. Knowledge of TR19, TR19 Grease and/or BS9999 would be highly desirable. Experience in fire damper testing, ventilation cleaning, kitchen extract cleaning, fire stopping or fire compartmentation. Ability to lead an assistant engineer and take ownership of job quality on site. Good communication skills when dealing with clients, site contacts and internal teams. Strong health and safety awareness and a professional approach to site work. Full UK driving licence and flexibility to travel as required. Desirable Experience Fire damper drop testing under BS9999 standards. Air hygiene, ventilation cleaning or kitchen extract cleaning experience under TR19 or TR19 Grease. Fire stopping, fire compartmentation or passive fire protection experience. Supervisory, lead engineer, mentoring or team leader experience. CSCS, IPAF, PASMA, asbestos awareness, manual handling or first aid training. Package & Benefits Salary of £40,000 – £45,000 per annum. Door-to-door travel pay. Full-time, permanent position with 42.5 hours per week. Company vehicle or van package and fuel card. 25 days holiday, plus bank holidays. Bupa private medical insurance following successful completion of probation. YuLife wellness app, Specsavers eyecare scheme and Audible account with monthly credit. Ongoing training and development. * Opportunity to join a growing business within the air and fire safety industries. Apply Today This is a strong opportunity for an experienced Lead PPM Engineer, Fire Damper Engineer, Air Hygiene Engineer, Kitchen Extract Cleaning Engineer or Fire Safety Engineer looking for a long-term role with responsibility, variety and progression. Apply today with your CV and we will be in touch to discuss the role in more detail

Position: Security Small Works & Service EngineerJob ID: 960395Location: South Yorkshire/North WestRate/Salary: £35,000 - £40,000 DOEBenefits: Company Vehicle, Fuel Card, Company Phone, Laptop, Pension Scheme, Overtime Opportunities, Training & Career Development, Holiday Entitlement + Bank HolidaysType: PermanentHSB Technical Ltd is a specialist recruiter within the Fire & Security, Power & Propulsion & Shipbuilding Sectors We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.The below job description will outline this position of: Security Small Works & Service EngineerTypically, this person will be responsible for carrying out small works installations, upgrades, additions, fault rectification, commissioning, and servicing of fire and security systems across commercial and residential sites, ensuring all work is completed to industry standards and customer requirements.Duties and responsibilities of the Security Small Works & Service Engineer will be:Install, modify, upgrade, and commission CCTV, intruder alarm, access control, and fire alarm systems.Carry out small works projects, system additions, and upgrades across customer sites.Diagnose and rectify faults on a range of fire and security systems.Test and commission systems to ensure full operational functionality.Complete all relevant documentation accurately and in a timely manner.Ensure compliance with BS5839, BS7671, NSI/SSAIB standards, and company procedures.Liaise professionally with customers, contractors, and internal teams.Maintain company vehicle, tools, and equipment to a high standard.Participate in an on-call rota as required.Qualifications and requirements for the Security Small Works & Service Engineer:Proven experience within fire and security small works, installation, commissioning, and servicing.Strong fault-finding and diagnostic skills.Good knowledge of current fire and security industry regulations and standards.Experience working with systems such as Advanced, Kentec, C-Tec, CEM, PAC, Avigilon, Hikvision, Dahua, Paxton, Texecom, Galaxy, and Pyronix is advantageous.Full UK Driving Licence.Ability to work independently and manage workload effectively.Excellent communication and customer-facing skills.Right to work within the UK.Working Hours & Package:Full-time permanent position.Salary of £35,000 - £40,000 DOE.Company vehicle and fuel card provided.Company phone and laptop supplied.Pension scheme.Overtime opportunities available.Ongoing training and career development.Holiday entitlement plus bank holidays.Supportive and professional working environment.This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.TPBN1_UKTJ

Service Engineer £38,000 - £43,000 + Van + Overtime + On Call Allowance Monday - Friday, 40 hours Per Week North Patch (Nottingham to Leeds) Do you have experience servicing, maintaining or repairing Bio Cabinets or clean air containment equipment? Do you want to join a market-leading manufacturer where you will receive specialist training, work on technically advanced products and have opportunities to progress your career? Due to continued growth, my client is looking for a Service Engineer to join the team covering their north patch. The successful applicant will be responsible for the installation, servicing, maintenance and repair of specialist laboratory and clean air equipment across customer sites throughout the UK. You will carry out planned preventative maintenance, fault finding, commissioning and customer training whilst ensuring the highest levels of service and compliance are maintained. Full product training will be provided, allowing you to develop into a technical specialist within the business. This is a fantastic opportunity to join an industry-leading manufacturer that has been at the forefront of clean air and containment technology for over 20 years. Supplying innovative solutions to laboratories, healthcare providers, pharmaceutical companies and research facilities worldwide, the business has built an excellent reputation for quality and customer service. With continued investment and ambitious growth plans, there has never been a better time to join the team. For more information please click apply and contact Patrick Walsh REFERENCE - 5179 - (phone number removed) The Role: Installation, servicing and repair of specialist laboratory equipment Planned preventative maintenance and fault finding at customer sites Customer training, commissioning and technical support Regular travel with occasional overnight stays The Candidate: Experience as a Service Engineer, Field Service Engineer or Maintenance Engineer Industry fault finding and repair experience Strong customer-facing and communication skills Full UK driving licence * Based between Nottingham and Leeds Consultant: Patrick Walsh Elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Service Engineer|Field Service Engineer|Maintenance Engineer|Installation Engineer|Electro-Mechanical Engineer|Electrical Engineer|Mechanical Engineer|Laboratory Equipment|Clean Air Technology|Fume Cupboards|Biosafety Cabinets|LEV|Validation|Calibration|Pharmaceutical|Scientific Equipment|Healthcare|Manufacturing|Repair|Service|Maintenance|Fault Finding|Leeds|Nottingham|North|Yorkshire|Sheffield|Midlands|Service|Crewe|Chesterfield|Lincoln|Mansfield|Worksop| INDMP

Your New Role We have an exciting opportunity for a Traffic Signal Engineer to join our dynamic Sheffield team, based on-site at our Olive Grove Depot. Working hours: 40 hours per week, Monday-Friday. The role includes occasional out-of-hours work for signal commissioning and upgrades, participation in a standby rota, and working outdoors across the Sheffield network, including collaboration with contractors during installation and maintenance activities. As a Traffic Signal Engineer, you will be responsible for the implementation, optimisation, and maintenance of traffic signal systems to ensure the safe and efficient movement of vehicles, cyclists, and pedestrians. You will analyse traffic data, develop signal timing plans, and support wider urban mobility strategies. Key Responsibilities: Liaise with local authorities, contractors, and multidisciplinary teams Support the installation, commissioning, and testing of traffic signal systems Monitor signal performance and troubleshoot faults across the network Respond to and resolve traffic signal faults within key performance requirements Ensure compliance with relevant standards (e.g. DMRB, TSRGD and local guidance) Participate in a standby rota We want to hear from you if you have: Experience in traffic signal design or traffic engineering (typically 2-5+ years) Strong understanding of traffic engineering principles and signal control systems (e.g. SCOOT, MOVA) Ability to analyse and interpret traffic data and collision statistics Knowledge of intelligent transport systems (ITS) and modelling/microsimulation tools Familiarity with cycling and pedestrian infrastructure design Proficiency in Microsoft Office and relevant engineering tools Strong analytical and problem-solving skills Attention to detail Effective communication and stakeholder engagement Teamwork and collaboration Project management capability A full UK driving licence is essential. Membership of a relevant professional body (e.g. HERS) is desirable. What we can offer you Career Development - Exceptional development and progression plan Pension - Generous Pension scheme which we will contribute to Holidays - Minimum 24 days holiday + Bank Holidays Choices - Our flexible benefits scheme is tailored by you, including buying additional annual leave, cycle2work scheme, charity giving and gym membership. Save with Amey - Our online voucher portal gives you access to thousands of discounts from leading retailers to help you save on shopping, days out, or nights in. It includes healthcare, free GP service, dental vouchers. Social Value - You will get 2 Community Involvement Days each year to volunteer for a charity of your choice and further opportunities to support fundraising initiatives. Application Guidance Amey is committed to Inclusion and Diversity . We welcome applications from all suitably qualified candidates, regardless of their race, gender, disability, religion/belief, sexual orientation or age. Please contact our recruitment team at (url removed) to discuss any access needs and reasonable adjustments that may be required at any point during the recruitment process. We reserve the right to close this vacancy before the closing date should we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. Apply today - We are excited to hear from you! #CVL

Medical Test Verification & Validation Engineer - Class III Medical Device Job Title: Medical Test Verification & Validation Engineer Duration: 6 months initially Location: Hybrid (3 days per week), Sheffield Outside IR35 £50-£65 per hour Key Responsibilities Develop and execute verification and validation activities for a Class III medical device, producing verification protocols, validation plans and test reports in line with design control requirements. Perform functional, integration, performance and reliability testing across hardware, embedded software and complete systems, ensuring full requirements traceability. Investigate test failures, support root cause analysis and collaborate with hardware, software and systems engineers to resolve issues. Generate objective evidence to support IEC 60601 compliance, ISO 14971 risk management and MDR/FDA regulatory submissions while contributing to continuous improvement of V&V processes. Essential Skills Proven Verification & Validation experience within a regulated medical device environment. Strong understanding of Design Controls, requirements traceability and the medical device development lifecycle. Experience testing embedded hardware and software systems, with hands-on use of laboratory equipment such as oscilloscopes, power supplies and data acquisition tools. Knowledge of IEC 60601, ISO 13485 and ISO 14971, with excellent technical documentation and reporting skills. Desirable Skills Experience supporting MDR and/or FDA submissions. Knowledge of automated test development using Python, LabVIEW or similar. Experience with Hardware-in-the-Loop (HIL), EMC or environmental testing. Familiarity with ALM tools such as Polarion, Jama or DOORS and manufacturing verification activities

Independent Forgings and Alloys, one of Europe's leading precision forging companies, is expanding and now looking to recruit a Quality Engineer, sytems biased to join its Sheffield-based, quality team. This is an excellent opportunity to join a well-established and highly respected organisation, working alongside experienced professionals and contributing to ongoing business growth and continuous improvement, while benefiting from career development and clear progression opportunities. Company Details Independent Forgings and Alloys Ltd (IFA) sits uniquely as the only single sited forge with open-die radial, press, hammer & ring rolling AND closed-die extrusion, drop stamp and blade forging in the world. Through our extensive forging capabilities and processes, we offer a fully integrated metals service centre: from ingot/billet and forging through to fully tested and released machined products. Job Vacancy As the Quality Engineer, you will be based at the Sheffield manufacturing site, working closely with production teams daily. You will take a hands-on approach to monitoring product conformity, investigating non-conformance's, and implementing practical quality improvements directly within the manufacturing process. This role is focused on driving measurable quality enhancements through root cause analysis, process capability improvement, corrective and preventive actions (CAPA), and continuous improvement initiatives. You will work collaboratively with operations, customers, and suppliers to resolve technical quality issues, reduce defects, improve right-first-time performance, and strengthen process controls across the site. Key Responsibilities Act as the day-to-day quality lead across the business, making informed decisions on product conformity and system compliance with support from the Quality Manager. Manage and improve the Non-Conformance Register, reducing NCR dwell time and driving effective corrective and preventive actions. Lead and support root cause analysis activities including 5 Whys and 8D's to resolve internal and external quality issues and prevent recurrence. Analyse monthly quality trends, including external providers and pyrometry compliance, identifying improvement opportunities. Review and implement customer-specific quality requirements within internal processes. Conduct internal audits and in-process quality checks to ensure compliance with procedures and standards. Contribute to monthly Quality Assurance performance reporting for management review. Support ongoing improvement of the Quality Management System, including document control, procedure updates, and staff training. Promote a strong culture of quality and continuous improvement across the organisation and deputise for the Quality Manager when required.Qualifications and Experience Experience in a Quality Engineer role within a engineering or manufacturing environment. Working knowledge of ISO9001 standards and ability to conduct internal audits. Proficiency in Quality Management Systems and problem-solving methodologies. Strong written and verbal communication skills for effective interaction with customers and suppliers. Ability to utilise statistical analysis techniques, particularly with Microsoft Excel. A proactive approach with the ability to work independently and collaboratively.Salary Information This is a fantastic Quality Engineer position, paying £40,000 to £50,000, located in Sheffield. This is your chance to make a real impact in a company that values quality and innovation. Additional Benefits A permanent role with Training and Development opportunities. 33 days holidays. Pension scheme - 5% contribution. Bonus scheme and Westfield cash plan Level 1. On-site parking is available.This position is being recruited by W Talent Recruitment exclusively who will be conducting the first stage, pre-screen interview. Any questions please contact Glyn Dobb at W Talent directly

Are you an experienced Electrical Engineer, Maintenance Supervisor, or Technical Supervisor looking to take the next step into leadership? We're recruiting for a Technical Supervisor to support a major commercial facilities management contract across York and Sheffield. This mobile role combines technical expertise with team leadership, overseeing a team of engineers, managing contractor performance, and ensuring high standards across multiple commercial sites. With excellent overtime, standby payments, bonus potential, and a clear pathway to Authorised Person (AP) training, this is an outstanding opportunity to progress your career within a growing Facilities Management business. The Role As Technical Supervisor, you will: Lead and support a team of five engineers across multiple commercial sites, driving performance and service quality. Monitor contractor performance, ensuring statutory compliance, KPIs, and safety standards are consistently achieved. Provide technical support across electrical, HVAC, heating, boilers, and power systems. Work closely with the Operations Manager to improve operational performance and maintain excellent client service. Participate in the on-call rota while supporting planned maintenance, reactive works, and continuous improvement initiatives. You To be successful in this Technical Supervisor role, you'll bring: Level 3 qualification in Electrical Engineering or a related discipline. Previous experience within commercial building services, Facilities Management, or Hard FM. Strong technical knowledge of electrical systems, HVAC, heating, boilers, and power distribution. Experience supervising engineers, contractors, or maintenance teams. Excellent communication, leadership, and organisational skills, with a proactive approach to problem-solving. What's in it for you? Join a leading Facilities Management provider that invests in the development of its engineering teams. £40,000 basic salary plus annual performance bonus. Realistic OTE of around £50,000 through overtime and on-call payments. Company tools provided and business mileage paid. Clear progression into Authorised Person (AP) training and future leadership opportunities. Apply Now! If you're an experienced Technical Supervisor, Electrical Supervisor, Engineering Supervisor, Maintenance Supervisor, Electrical Engineer, or Building Services Engineer, we'd love to hear from you. To apply for this Technical Supervisor position, click 'Apply Now' and send your CV to Frankie Cook. Interviews are taking place now with a streamlined interview process. Apply today to secure your opportunity to join a growing team with genuine career progression

Job Description - Quality Inspector Salary depending on experience : £30,000 – £33,500 Hours: Days Location: Sheffield Inspire Resourcing are recruiting a Quality Inspector on behalf of a long‑established and growing manufacturing business in Sheffield. This role is ideal for someone who is highly organised, proactive, and eager to take ownership of both hands‑on inspection work and the administrative backbone that keeps a quality function running smoothly. The team are open to candidates with existing quality experience or strong administrators from a manufacturing environment who want to step into a quality career. What matters most is initiative, accountability, and the drive to learn. You’ll be supported by a team, who will invest time in your development, but this role requires someone who can stand on their own two feet, take responsibility, and push things forward without needing constant supervision. Key Responsibilities Quality Inspection & Reporting: Carry out manual inspection of goods and components to ensure they meet required specifications. Complete and maintain inspection logs, reports, and documentation accurately and on time. Generate non‑conformance reports (NCRs) and follow up actions. Support product testing and work alongside the Test Engineer on returns and investigations. Conduct first‑off inspections using basic measuring equipment (e.g., calipers, multimeters). Quality Administration & Documentation Keep quality documentation organised, updated, and compliant - including quality manuals, SOPs, and production documentation. Write clear, structured reports and assist in creating or updating standard operating procedures. Maintain calibration records and ensure processes meet ISO 9001 requirements. Manage documentation to ensure traceability and audit readiness. Continuous Improvement & Support Work with the wider operations/technical team to maintain and improve QHSE systems. Support internal audits and help drive compliance with ISO and other certification standards. Assist in resolving supplier issues, organising returns, and communicating quality concerns. Participate in improvement projects aimed at reducing internal and external quality issues. Support production teams with quality‑related queries and help implement corrective actions. Cross‑Functional Collaboration Spend time on the production floor to understand processes, inspect goods, and support manufacturing teams. Attend and contribute to regular meetings with the Operations Manager. The ideal candidate: Essential Strong administrative skills with excellent attention to detail. Experience working in a manufacturing environment. A self‑starter who takes initiative and doesn’t wait to be told what to do. Ability to stay organised, keep documentation up to date, and take ownership of tasks. Confident writing reports, updating manuals, and producing structured documentation. Comfortable inspecting products and learning quality processes. Good IT skills, especially MS Office. Desirable Previous experience in a quality role. Understanding of ISO 9001 or other quality standards. Experience writing SOPs or quality documentation. Electronics knowledge (helpful but absolutely not essential). The benefits A supportive manager who will invest in your development - but expects you to take responsibility and show progression, especially after the first month. A stable, friendly team environment with opportunities to grow your career in quality. A varied role combining office‑based admin with hands‑on inspection work. Days working * Excellent salary

Independent Forgings and Alloys (IFA), one of Europe's leading precision forging companies, is expanding and looking to recruit a Lead Manufacturing Engineer to join its Sheffield-based team. This is an excellent opportunity for a Lead Manufacturing to join a highly respected aerospace manufacturing organisation. Working at the interface of Production, Quality and Metallurgy, the successful candidate will play a critical role in improving process capability, product quality and operational performance across one of the most technically advanced forging operations in Europe. Company Details Independent Forgings and Alloys Ltd (IFA) sits uniquely as the only single-sited forge with open-die radial, press, hammer & ring rolling and closed-die extrusion, drop stamp and blade forging capabilities in the world. Through extensive forging and manufacturing processes, IFA offers a fully integrated metals service centre from ingot and billet production through to fully tested and released machined products. Job Vacancy As the Lead Manufacturing Engineer, you will be based at the Sheffield manufacturing facility, working closely with Quality, Production and Metallurgy teams to drive continuous and Quality improvements across the manufacturing operations. The role will focus on improving manufacturing processes, investigating technical and quality issues, supporting customer requirements and ensuring products consistently meet demanding aerospace and engineering specifications. You will be a key technical resource within the business, helping to improve process capability, product conformity and operational performance through data-driven decision making and engineering expertise. This position would suit an experienced engineer from a manufacturing environment with a strong background in quality improvement, process engineering, metallurgical processes or operational excellence. Key Responsibilities Act as the technical interface between Production, Quality and Metallurgy teams across the manufacturing operation Lead investigations into manufacturing non-conformances, quality concerns and process deviations Conduct root cause analysis and implement corrective and preventive actions to improve performance Drive continuous improvement initiatives focused on product quality, process capability and operational efficiency Support metallurgical investigations and process validation activities Analyse manufacturing and quality data to identify trends, risks and opportunities for improvement Develop and optimise manufacturing processes, procedures and controls Support customer quality requirements, audits and technical investigations Work closely with Quality Engineers and Metallurgists to ensure compliance with customer, aerospace and regulatory standards Support process risk assessments, FMEA activities and control plan development Participate in internal, customer and third-party audits Lead and support projects aimed at reducing waste, improving yield and enhancing manufacturing performance Provide technical support and guidance to production teams on process control and best practice Develop manufacturing documentation, technical procedures and process instructions Support new product introduction and manufacturing readiness activities Carry out any other reasonable duties as requested by managementQualifications and Experience Degree qualified in Manufacturing Engineering, Mechanical Engineering, Metallurgy, Materials Engineering or a related discipline Previous experience within aerospace, forging, metals, steel, special alloys, machining or heavy manufacturing environments Strong understanding of manufacturing processes and quality systems Experience working closely with Quality and Metallurgy functions Proven track record of investigating manufacturing issues and implementing sustainable process improvements Strong root cause analysis and problem-solving skills Experience of process capability improvement and data analysis Knowledge of quality tools such as 8D, FMEA, SPC, APQP or similar methodologies Understanding of metallurgical processes, heat treatment or materials performance would be highly advantageous Experience supporting customer audits and technical investigationsSalary Information Starting salary between £45,000 - £55,000, depending on experience. Permanent position with long-term career opportunities Training and professional development support Opportunity to work within an advanced aerospace manufacturing environment 33 days holiday Pension scheme with employer contribution Bonus scheme and Westfield cash plan On-site parking availableThis position is being recruited exclusively by W Talent Recruitment, who will be conducting the first-stage pre-screen interview. Any questions, please contact Glyn Dobb at W Talent directly

Rise10 Recruitment is exclusively partnering with a well-established engineering organisation to recruit an experienced Software Automation Engineer. This is an exciting opportunity to join a business that designs and delivers highly engineered automation and motion control systems for customers operating within safety-critical industries. Working on technically challenging, bespoke projects, you'll play a key role in developing software that controls complex machinery used across a variety of sectors. The Role: As a Software Automation Engineer, you'll be responsible for the design, development, testing and commissioning of PLC and HMI software for advanced automation systems. Working closely with multidisciplinary engineering teams, you'll support projects from initial concept through to commissioning, ensuring systems are delivered safely, efficiently and to the highest quality standards. Key Responsibilities: Design and develop PLC and HMI software for industrial automation systems. Produce technical documentation including Functional Design Specifications, User Requirements and Cause & Effect documentation. Develop robust, scalable software using Structured Text and Ladder Logic. Design machine network architectures and industrial communication systems. Integrate software with electrical hardware, motion control systems and distributed I/O. Test, debug and optimise automation software. Commission systems both in-house and at customer sites. Support fault diagnosis, software improvements and ongoing product development. Ensure compliance with relevant functional safety standards and engineering best practice. Work collaboratively with Mechanical, Electrical and Commissioning Engineers to deliver successful projects. About You: We're looking for an experienced Automation Engineer with a passion for developing reliable control systems. You'll ideally have: HND or Degree qualification in Electrical Engineering, Software Engineering, Automation or a related discipline. Experience developing PLC-based automation software. Strong experience with Allen Bradley PLCs and Rockwell Automation software. Experience using Studio 5000, Logix Designer, FactoryTalk View, View Designer and RSView SCADA. Excellent knowledge of Structured Text and Ladder Logic programming. Experience with motion control systems, variable speed drives and industrial networking. Strong understanding of distributed I/O, SCADA and machine control systems. Experience commissioning industrial machinery in real-world environments. Excellent problem-solving skills and the ability to work within multidisciplinary engineering teams. Desirable: CompTIA A+, Network+ or Security+ certifications. * Experience developing automation software for cranes, lifting equipment or other heavy industrial machinery. If you read this and feel this is you, or you have experience in most of these areas but have a growth mindset and want to work towards this becoming you; then please apply

Role : DevOps Engineer(IAM) Location: - Sheffield , UK Type of Job: Contract (6 Months) Mode of work: Hybrid 2-3 Days on site in a week JD Key Skills & Experience Technical Skills Infrastructure as code (Terraform & GCP Provisioning) Terraform core, GCP Infra, Policy as code, develop the capability to manage, maintain and write policies, Containerization & Kubernetes (GKE), Docker, Kubernetes, Helm / Kustomize, GKE Ops CI/CD engineering, pipeline authoring, artifacts management, testing automation, deployment strategy Data pipeline and DevOps (KAFKA / PubSub) – Kafka basics, schema registry, streaming infra and monitoring Graph platform engineering, Neo4j basics, backups, recovery and DR GDS/APOC, observability DevSecOps & platform security, security scanning, IAM and identity, network security, compliance Release engineering and governance, release ops, change management, documentation Regionalisation and compliance, regional deployments and failover, data residency, conditional access Soft Skills Strong problem-solving and troubleshooting capabilities. Ability to work collaboratively across security, engineering, and operations teams. Excellent communication and documentation skills. Experience working in Agile/Scrum environments. Experience of Privileged Access Management and identity access management Understanding and experience of technologies deployed at a large scale in a global IT enterprise Experience of working in an Agile team – managing workload in Jira and engagements in Jira Service Desk Ability to adapt and understand new technologies – being self-motivated to learn Strong interpersonal, influencing, communication and report-writing skills Ability to interact appropriately with users of various technical skill levels * Ability to work in a multi country, culturally diverse and time-zone separated role

M+E Maintenance Engineer Permanent - Shift Pattern Hours: 6am - 2pm, 2pm - 12 Midnight currently | - This will be changing the in near future to the following 6am - 2pm, 2pm - 10pm, 10pm to 6am | Sheffield £45,000 - £48,000 + Package The M+E Maintenance Engineer Opportunity A recruitment partner is currently supporting a well-established engineering and manufacturing business in the search for an experienced M+E Maintenance Engineer to join their maintenance team. This position will play a key role in supporting day-to-day operational reliability across a fast-paced manufacturing environment. The successful candidate will be responsible for both electrical and mechanical maintenance activities, ensuring plant equipment, systems, and machinery are maintained to a high operational and compliance standard. The business operates within a precision engineering and heavy industrial environment, supplying specialist engineered products into demanding global markets. Key Responsibilities of the M+E Maintenance Engineer The successful M+E Maintenance engineer will be responsible for carrying out planned preventative maintenance as well as responding to reactive breakdowns across the facility. The role will involve diagnosing and repairing both electrical and mechanical faults in a safe and efficient manner, minimising downtime and supporting production continuity. You will assist with installation works and modifications to plant equipment where required, while ensuring all maintenance activities are completed in accordance with site safety procedures and compliance standards. Prior to carrying out tasks, suitable risk assessments and safe systems of work must always be followed. The role will also involve working with site electrical and control systems, supporting continuous improvement initiatives, and maintaining accurate maintenance records using internal systems and software. You will regularly liaise with production teams, supervisors, and external contractors to coordinate maintenance activities and ensure work is completed effectively and safely. Requirements from the M+E Maintenance Engineer Applicants should hold a recognised apprenticeship within either electrical or mechanical maintenance engineering and have previous experience working within a manufacturing, industrial, or heavy engineering environment. Candidates should have strong fault-finding abilities across mechanical and electrical systems, with exposure to PLCs, plant controls, and automated systems considered highly advantageous. The ideal candidate will be self-motivated, safety conscious, and capable of working independently or as part of a wider engineering team. Strong communication skills and basic computer literacy are also important for the role. What’s on Offer for the M+E Maintenance Engineer This opportunity offers the chance to join a stable and growing engineering business with a strong reputation within its sector. The company can provide long-term career development, exposure to complex engineering systems, and the opportunity to work within a highly skilled maintenance environment

Electrical Maintenance Engineer 📍 Sheffield 💷 £47,723.88 🕒 2 x 12 hour day shifts and 2 x 12 hour night shift (4O4O) - No weekends. What's in it for you: ✨ Up to 12% bonus ✨ 31 days holiday ✨ Up to 8% pension ✨ Ongoing training & development ✨ Long-term, secure permanent role Stafforce Recruitment are partnering with a well-established heavy manufacturing business in Sheffield to recruit an experienced Electrical Maintenance Engineer. The Role Planned and reactive electrical maintenance across site First-line response to breakdowns and fault finding Electrical installation work to 18th Edition (BS7671) Ensure compliance with H&S, PTW systems and HV safety rules Support continuous improvement and planned maintenance Accurate fault reporting and SAP updates Assist with mechanical maintenance when required Support and develop Electrical Apprentices About You Time-served Electrical Maintenance Engineer Strong hands-on electrical fault-finding experience HNC or equivalent experience in heavy manufacturing / industrial environments Comfortable working 4 on 4 off days & nights Safety-focused with good communication skills📩 Apply now or contact Stafforce Recruitment for a confidential chat. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Independent Forgings and Alloys, one of Europe's leading precision forging companies, is looking to recruit a Contract, Quality Engineer to support its Sheffield-based Quality team through a busy period of AS9100 internal and external audits. This is an excellent opportunity for an experienced Aerospace, quality professional to join a highly respected manufacturing business and make an immediate impact by ensuring the business remains fully compliant and audit ready. Company Details Independent Forgings and Alloys Ltd (IFA) sits uniquely as the only single sited forge with open-die radial, press, hammer & ring rolling AND closed-die extrusion, drop stamp and blade forging in the world. Through our extensive forging capabilities and processes, we offer a fully integrated metals service centre: from ingot/billet and forging through to fully tested and released machined products. Job Vacancy As the Contract Quality Engineer, you will be based at the Sheffield manufacturing site, working closely with the Quality and Production teams to ensure the business is fully prepared for upcoming AS9100 internal and external audits. This is a hands-on role requiring an experienced Quality Engineer who can quickly integrate into the business, review and strengthen the Quality Management System, support audit activities, close out non-conformances, and drive corrective actions. You will provide practical support across the manufacturing operation to ensure continued compliance with AS9100 standards and customer requirements. Key Responsibilities Support the business with AS9100 internal and external audit preparation and delivery. Conduct internal process and system audits in line with AS9100 requirements. Support customer, third-party and certification audits. Review and improve Quality Management System documentation and procedures. Manage audit findings and non-conformances, ensuring timely corrective and preventive actions (CAPA). Lead root cause investigations using recognised quality tools including 8D, 5 Whys and Fishbone Analysis. Work closely with Production and Engineering teams to improve process compliance and product quality. Review customer quality requirements and ensure they are incorporated into business processes. Support continuous improvement initiatives across manufacturing operations. Promote best practice and maintain a strong quality culture throughout the business.Qualifications and Experience Proven experience as a Quality Engineer within an aerospace manufacturing environment. Strong working knowledge of AS9100 Rev D and Quality Management Systems. Previous experience supporting successful AS9100 internal and external audits. Internal Auditor qualification or demonstrable auditing experience. Experience managing non-conformances, CAPA and root cause investigations. Strong communication skills with the ability to work effectively across all levels of the business. Able to work independently and make an immediate contribution within a manufacturing environment.Contract Information This is an excellent opportunity for an experienced Quality Engineer, or Auditor to support a leading aerospace manufacturer during a critical audit period. Minimum 3-month contract (with the potential for extension). Competitive hourly or daily rate. Immediate start preferred. Sheffield-based, full-time, site-based role. Opportunity to work with one of Europe's leading aerospace forging businesses. Free on-site parking. Collaborative and experienced Quality team. Immediate start available.This position is being recruited by W Talent Recruitment exclusively, who will be conducting the first-stage pre-screen interview. Any questions, please contact Glyn Dobb at W Talent Recruitment directly

Are you ready to take the next step in your career as a Senior Electronics Engineer? \n Our client, a leading organisation in the manufacturing sector, is on the lookout for an innovative and driven individual to join their dynamic team. If you have a passion for electronics and thrive in a collaborative environment, this could be the perfect opportunity for you! \n What You'll Do:As a Senior Electronics Engineer, you will report directly to the Technical Manager and play a crucial role in shaping both current and future electronic product offerings. Your expertise will support multiple departments and ensure excellence in delivering high-quality products to customers worldwide. \n \n Here's what you can expect: \n \n\n • Design & Development: Utilise your skills in analogue and digital PCB design to create cutting-edge electronic products.\n, • Product Lifecycle Management: Engage in the full product lifecycle, from concept generation through to product release, and demonstrate your ability to deliver designs into service.\n, • Compliance & Standards: Navigate the regulatory landscape of the UK, EU, and US, ensuring your designs meet all necessary compliance standards.\n, • Team Collaboration: Work hands-on with your team to tackle challenges from first principles, fostering an environment of innovation and problem-solving.\n, • Quality Assurance: Review, update, and potentially redesign existing electrical items to enhance quality and safety standards.\n, • Documentation & Support: Generate essential documentation, including Wiring Diagrams and build instructions, to guide manufacturing processes and support product testing throughout their lifecycle.\n\n \n What We're Looking For:The ideal candidate will possess a blend of technical expertise and excellent communication skills. You should be comfortable explaining complex concepts to both technical and non-technical audiences, and be ready to roll up your sleeves to get involved with hands-on projects. Here's what you should bring to the table: \n \n\n • Strong background in analogue and digital PCB design, including Linear & Pulse Width Modulation Power Supplies, DC Motor Controls, and Battery Chargers.\n, • Proficient in fault finding to component level and safe practises regarding mains voltage primary Transformers.\n, • Relevant Electronics Degree (or equivalent) and a CSCS card.\n, • Familiarity with Assembler/BASCOM/FlowCode programming languages is a plus.\n, • Experience in PCB design using EasyPC is desirable.\n\n \n Why Join? \n\n • Dynamic Work Environment: Join a team that values collaboration, creativity, and innovation.\n, • Career Development: Opportunities for personal and professional growth within a thriving organisation.\n, • Impactful Work: Contribute to products that make a difference in the lives of customers globally.\n\n \n Working hours Days - Monday - Friday \n If you're ready to take on this exciting challenge and become a key player in a forward-thinking organisation, we want to hear from you! Apply now and let's drive the future of electronics together. \n How to Apply:Please submit your CV and a cover letter detailing your relevant experience and why you would be a great fit for this role. \n Join us in shaping the future of electronics - your journey starts here! \n Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. \n Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. \n By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Prestige Skills LTD are looking for skilled Installation, Service and Breakdown Gas Engineers to join our team on a self-employed basis. If you’re motivated, flexible, and bring a high level of expertise, this could be the perfect opportunity for you! Responsibilities: - Service, Repair, and Installation of gas appliances, including but not limited to boilers, cookers, and fires. - Conducting safety inspections and ensuring compliance with all gas safety regulations. - Diagnosing faults and providing efficient and effective solutions. - Maintaining excellent communication with customers and providing top-notch customer service. - Completing and submitting necessary documentation and certification for each job. Requirements: - Fully qualified Gas Engineer with all relevant and current Gas Safe registration. - Experience in service, repair, and installation of a variety of gas appliances. - Great Customer Service - Own reliable van and full set of tools. - Public liability insurance to cover all work undertaken. - Ability to work independently and professionally, maintaining high standards on every job. - Strong communication skills and a commitment to customer satisfaction. Qualifications: - Valid ACS qualifications (CCN1, CENWAT, CPA1, CKR1, HTR1, MET1). - Minimum of 3 years’ experience in a similar role is preferred. - Full UK driving license. - Clean DBS What We Offer: - Competitive rates and payment per job. - Opportunities for regular work and potential for long-term contracts. - A supportive and professional working environment

Quality Compliance Engineer Aerospace Sheffield Salary to £38,000 This is a hands-on quality role for someone who understands that a Business Management System is only as good as the people maintaining it. The business operates to AS9100 standards and needs a Quality Compliance Engineer who can own the audit process, close out non-conformances properly, and keep the BMS in shape - not just on paper. What You'll Be Doing Maintaining and developing the Business Management System (BMS) in line with ISO 9001 and AS9100 requirements Planning and conducting internal audits across all departments, managing the audit schedule end to end Acting as the primary point of contact for external audits - customers, certification bodies, and regulatory organisations Raising, tracking, and closing out non-conformances with proper root cause analysis and corrective action implementation Controlling quality documentation - procedures, work instructions, and records Conducting supplier quality evaluations and audits where required Providing quality guidance and training to staff across the business Supporting customer quality requirements and leading investigations when needed The Environment A precision manufacturing facility in Sheffield, working Monday to Friday. The quality function sits close to the shop floor and interfaces regularly with production, supply chain, and customers. Occasional travel maybe required for supplier and customer visits. The role reports directly to the Quality Manager. What You'll Need Essential: Proven experience in a quality engineering or quality assurance role Demonstrable experience managing or maintaining a Business Management System Hands-on experience conducting internal and external audits ISO 9001 / AS9100 Internal Auditor qualification Strong working knowledge of quality management systems Solid root cause analysis and problem-solving capability Organised, detail-focused, and able to manage competing deadlines independently Desirable: Degree or equivalent in Engineering, Manufacturing, or a related discipline Background in aerospace or precision engineering What's On Offer Salary dependent on experience - to be discussed at application stage Monday to Friday working pattern Permanent position based in Sheffield * Occasional travel only - no extended time away from base About the Business Based in Sheffield, this established advanced manufacturing business operates across regulated supply chains where precision, traceability and consistent quality are essential. With AS9100 certification and a customer base that expects rigorous standards, quality is integral to how the business operates. The quality function works closely with customers, suppliers and production teams to maintain compliance, protect certification and support the delivery of reliable products. Ready to make your next move? Apply now. Ion-Tec | Engineering & Manufacturing Recruitment | Specialist recruitment for engineering and manufacturing businesses across Yorkshire & The North

Tendering Engineer (66kv-132kv) \n Our client, a leader in the power utilities and renewable energy sector, is currently seeking a Tendering Engineer (66kv-132kv) to join their team. This permanent position plays a pivotal role in the preparation and submission of high-quality proposals for power distribution projects, especially in the 66kv to 132kv range. \n Multiple positions which offer hybrid / remote working and within the non regulated industry (BESS, Solar, Indistrial, Wind, Data Centre and Light Rail) \n x1South x1 Midlands and x1 North located Key Responsibilities:\n\n • Preparation and submission of technical and commercial proposals\n, • Estimating costs and creating comprehensive bid documents\n, • Collaborating with engineering and project management teams to gather necessary information\n, • Reviewing tender specifications and identifying technical requirements\n, • Conducting thorough analyses of tender documentation\n, • Assessing project risks and creating mitigation strategies\n, • Maintaining up-to-date knowledge of market trends and competitor activities\n, • Ensuring compliance with industry standards and regulations\nJob Requirements:\n\n, • Experience in preparing and managing proposals within the power utilities or renewable energy sector\n, • Strong understanding of power distribution networks, particularly in the 66kv to 132kv range\n, • Proficiency in cost estimating and financial analysis\n, • Excellent analytical and problem-solving skills\n, • Ability to interpret complex technical documents\n, • Effective communication and collaboration skills\n, • Strong attention to detail and organisational abilities\n, • Relevant engineering degree or equivalent qualification\nBenefits:\n\n, • Paying up to £85k\n, • Vehicle allowance or vehicle\n, • 2 days holiday plus Bank Holidays\n, • Pension Contribution\n, • Monday to Friday 40hrs per week\n, • Remote / Hybrid working set up (office visit essential, when required)\n, • Opportunities to work on a variety of challenging projects\n, • Professional development and training opportunities\n, • Supportive and collaborative work environment\n, • Comprehensive employee benefits package\n\n If you are an experienced Tendering Engineer looking for a new opportunity to leverage your expertise in the power distribution and renewables sector, we would love to hear from you. Apply now to join our client's dynamic and innovative team.

Commissioning Engineer (HV Electrical Systems) Can be based; Sheffield, Nottingham, Cambridge and surrounding areas £75,000 - £80,000 + Hybrid Working + Matched Pension + Life Assurance + Enhanced Family Leave + Buy/Sell Holidays + 24/7 GP Service + Employee Wellbeing Programme Are you an experienced Commissioning Engineer or Senior Authorised Person with a background in HV electrical systems and grid infrastructure? Do you want to take ownership of commissioning and energisation activities on major HV projects up to 132kV? This company is a specialist engineering and infrastructure delivery organisation operating within the high voltage grid connection sector. They deliver complex electrical infrastructure projects across utilities, renewable energy and industrial markets, supporting the UK's transition to a low-carbon energy system. In this role, you will be responsible for leading the testing, commissioning and energisation of HV electrical infrastructure projects. You will ensure all systems are fully tested, compliant and safely energised, working closely with DNOs, TSOs, contractors and internal engineering teams. You will take ownership of commissioning plans, testing programmes and site activities, ensuring all works are delivered safely, on time and to the required technical standards. The ideal candidate will have strong HV commissioning experience, including protection testing, relay configuration and substation energisation activities, along with the ability to manage multiple stakeholders in high-pressure environments. This is a highly technical and hands-on role offering the opportunity to work on major infrastructure projects and play a key role in bringing critical energy assets into operation. The Role: Lead HV commissioning activities up to 132kV Undertake testing of protection systems, switchgear and electrical plant Develop and manage commissioning programmes and documentation Support energisation and switching operations Liaise with DNOs, TSOs, contractors and project teams Supervise subcontractors and site-based commissioning activities Ensure compliance with safety and regulatory standards The Person: Experience in HV commissioning within utilities, ICPs or power generation Strong knowledge of protection systems and HV testing Experience up to 132kV electrical systems Understanding of commissioning procedures and energisation processes Strong communication and stakeholder management skills Willingness to travel nationally and work on site Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Overview: An exciting opportunity has arisen for a Senior Engineer to join a leading Tier One civil engineering contractor delivering a major city centre infrastructure and regeneration project in Sheffield. The Senior Engineer will take ownership of engineering delivery across highways, public realm and drainage works, leading the site engineering function while ensuring works are delivered safely, accurately, on programme and to the highest quality standards. Key Responsibilities: Lead the site engineering team, providing technical guidance, mentoring and support to Site Engineers and Graduate Engineers. Assist the Site Agent with planning, programming and coordinating engineering activities to achieve project milestones. Oversee setting out, engineering control and surveying activities across multiple work areas. Produce, review and implement Inspection & Test Plans (ITPs), ensuring all hold points, inspections and testing requirements are achieved. Ensure works are delivered in accordance with project specifications, drawings, quality standards and relevant industry standards. Maintain accurate engineering records including site diaries, quality documentation, as-built surveys, red-line drawings and test results. Coordinate engineering activities with subcontractors and support effective delivery across all disciplines. Work closely with the commercial team by providing accurate records to support valuations, change management and financial reporting. Promote the highest standards of health, safety, environmental and quality compliance across site. Drive continuous improvement by identifying innovative engineering solutions and improving site processes. Qualifications & Experience: Previous experience as a Senior Engineer or experienced Site Engineer on highways, public realm, infrastructure or heavy civil engineering projects. HNC/HND, NVQ Level 3 or Degree qualified in Civil Engineering or a related discipline. SMSTS and relevant CSCS Card. Strong setting out experience using Total Station, GPS and surveying equipment, with the ability to oversee engineering control across multiple work fronts. Experience delivering highways improvements, drainage, earthworks, reinforced concrete, paving or urban infrastructure works. Strong understanding of Inspection & Test Plans (ITPs), quality assurance processes, specifications and engineering documentation. Proven ability to lead engineering teams, coordinate subcontractors and support programme delivery within live construction environments. Excellent communication, planning and problem-solving skills. Full UK Driving Licence. Benefits: Competitive salary with generous annual leave and the option to purchase additional holidays. Company pension, private medical options and Employee Assistance Programme. Cycle to Work scheme, employee share purchase scheme and a range of retail and lifestyle discounts. Professional membership support, ongoing training and excellent career development opportunities. Enhanced family-friendly policies. If you're an experienced Senior Engineer looking to play a key role on a major infrastructure project in Sheffield, we'd love to hear from you

Our client is a leading International Manufacturer of precision engineered components and systems for tolerance critical applications. The business has a worldwide presence and is a major supplier to the petrochemical market. The success of the company has been built on developing quality products in rapid lead times supported by a focused approach to customer service. Principle Function: We are looking for an experienced Multi Skilled Maintenance Engineer to join the team to support the Maintenance Supervisor in ensuring both electrical and Mechanical compliance. This will include the carrying out of installation and maintaining of systems, along with ensuring that breakdowns and planned activities are managed effectively. Responsibilities and duties include: Working safely throughout all activities in line with safety standards and procedures, ensuring a full Risk Assessment is carried out prior to undertaking any task.. Ensuring applicable compliance is maintained. Responding to Electrical and Mechanical breakdowns & faults and managing planned & reactive work in a timely and logical manner. Carry out electrical installation work as required. Using appropriate data and systems to manage the site's electrical & control systems. Liaise with and assist in the managing of third party contractors. Liaise and engage with stakeholders at all levels.Essential Skills and Attributes: Recognised apprenticeship within a Mechancial or Electrical maintenance. Knowledge of plant control and the use of PLC and control systems is preferred. Ability to fault find mechanical. Enthusiastic and computer literate, with good interpersonal skills along with the ability to work as part of a team or unsupervised. Please apply for immediate consideration Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

Steelwork Draughtsman/Design Engineer Location: Barnsley Salary: £50,000-£65,000 DOE Are you a skilled Structural Draughtsman? Would you like to join a forward thinking Manufacturing company, who are frontrunners in their sector? If so, this role is for you! Lodestone Recruitment is recruiting on behalf of a well-established structural steelwork business for an experienced structural steelwork to join their growing team, producing fabrication and erection drawings, 3D models, and material schedules for a range of structural steel projects. What's on offer £50,000-£65,000 depending on experience 25 days holiday + bank holidays (increasing with service) Paid volunteer days Contributory pension & life insurance Health cash plan & employee rewards scheme Genuine career development and progression opportunities The role Produce fabrication/erection drawings and 3D models using Tekla Structures or Advance Steel Generate GA drawings, assembly drawings, bolt lists, BOMs, and cutting lists Review engineering/architectural drawings and resolve technical queries with engineers, PMs, and fabricators Ensure compliance with British Standards and Eurocodes Update drawings for design changes, client feedback, and site needs What we're looking for Proven experience as a Structural Steelwork Detailer or Structural Design Engineer/ Draughtsman Strong Tekla Structures (or equivalent) skills Confident reading structural/architectural drawings Excellent attention to detail, communication, and organisation HNC/HND or degree in a related discipline preferred (or equivalent experience) Desirable: BIM workflow knowledge, CNC data experience (DSTV/NC files), CE/UKCA familiarity, AutoCAD Would this be something that you are interested in? Apply now if so! Lodestone Recruitment are acting as an employment agency with regards to this vacancy

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company Job Title: Electrical Controls & Instrumentation Engineer Job Purpose To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies engineering & manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site Key Responsibilities 1. Asset Reliability & Maintenance Deliver high levels of plant availability through effective maintenance of instrumentation and control systems. Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers). Support reliability-centred maintenance (RCM) and predictive maintenance initiatives. Provide rapid fault diagnosis and resolution to minimise production downtime.2. Control Systems & Automation Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations. Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc Support and enhance automation systems for: furnace processes Fault diagnosis within the site for controls, instrumentation and combustion Ensure robust control logic, interlocks, and safety systems are maintained.3. Continuous Improvement Identify opportunities to improve process stability, yield, energy efficiency, and product quality.4. Projects & Engineering Development Support capital projects, upgrades, and plant modifications. Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS). Supervise installation and commissioning activities, including loop checks and SAT/FAT testing.5. Health, Safety & Environmental Compliance Ensure all systems comply with company Zero Harm safety culture. Participate in risk assessments such as HAZOP, SIL verification, and FMEA. Ensure compliance with COMAH regulations and other UK industry standards. Promote safe working practices in a heavy industrial environment.6. Stakeholder Collaboration Work closely with operations, mechanical, and electrical teams to support production targets. Liaise with OEMs, contractors, and engineering partners. Provide technical guidance and mentorship to technicians and apprentices.7. Documentation & Governance Maintain accurate maintenance records, calibration certificates, and engineering documentation. Ensure compliance within company standards and audit requirements.Skills & Experience Essential Technical Skills Strong experience with: PLC programming (Siemens, Allen-Bradley) would be advantageous Burner Management identification and finding Distributed Control Systems (ABB, Honeywell, etc.) SCADA systems SAT and TUS experience would be advantageous Desirable Experience within steel or heavy industry (e.g., metals, energy, petrochemical). Exposure to high-temperature or continuous manufacturing processes. Knowledge of drives, motors, and process automation in the heavy engineering industry Qualifications A relevant qualification (or equivalent experience) in: Control & Instrumentation Engineering Electrical/Electronic Engineering

Engineering & Design Manager About the Role A leading organisation within the UK energy sector is seeking an Engineering & Design Manager to lead engineering and design activities across HV/MV/LV electrical connection projects. This role will focus on overseeing substation, overhead line (OHL), and underground cable design delivery, ensuring technical excellence, compliance, and effective coordination of multidisciplinary engineering teams across complex infrastructure projects. Working closely with senior leadership, project managers, and construction teams, you will be responsible for ensuring designs are delivered to a high standard, on time, and within budget, while supporting construction and commissioning activities through to energisation. You will play a key role in driving engineering quality, improving design processes, and ensuring compliance with industry standards and DNO/TSO requirements, while supporting the delivery of safe, efficient, and innovative energy infrastructure solutions. Key Responsibilities Leadership & Team Management Lead, mentor and develop a team of Senior Engineers, Engineers and Design/Draughting staff. Allocate resources effectively across multiple concurrent HV/MV/LV projects. Promote a culture of safety, quality, collaboration, and continuous improvement. Conduct performance reviews and support professional development across the team. Drive high performance and technical excellence within the engineering function. Engineering & Design Oversight Oversee basic and detailed engineering design for HV/MV/LV substations (AIS, GIS, hybrid), OHL, and cable systems. Ensure compliance with CDM Regulations, IEC/IEEE standards, Grid Code, and TSO/DNO requirements. Review and approve engineering deliverables including drawings, calculations, and technical documentation. Drive standardisation and best practice across engineering design processes. Maintain knowledge of design tools including AutoCAD, ETAP, Amtech, DIgSILENT, MicroStation, and CDEGS. Stakeholder & Client Engagement Work closely with Project Managers, Construction teams, Estimators, and Site Engineers to deliver practical engineering solutions. Provide technical input during tenders, proposals, and project delivery phases. Act as technical point of contact for clients, DNO/TSO representatives, contractors, and suppliers. Participate in design reviews, technical meetings, and manage design change control. Support commissioning activities from design stage through to energisation. Quality, Safety, Compliance & Continuous Improvement Ensure compliance with CDM regulations and health, safety, and environmental standards. Identify technical risks early and implement mitigation strategies. Drive continuous improvement across engineering systems, processes, and delivery. * Support innovation and integration of renewable and smart energy technologies. About You You are an experienced engineering leader with a strong background in HV electrical design and multidisciplinary project delivery. You are confident managing engineering teams and delivering complex infrastructure projects in regulated environments. You are a strong communicator who can translate technical requirements into clear delivery outcomes and work effectively across engineering, commercial, and operational teams. You are organised, commercially aware, and comfortable managing multiple priorities in a fast-paced project environment. Essential Experience & Qualifications Bachelor’s degree in Electrical Engineering (Master’s preferred). Proven experience in HV electrical design up to 132kV (ideally up to 400kV). Experience leading engineering teams within infrastructure or energy projects. Strong knowledge of HV/MV substation systems and protection & control schemes. Experience with AIS/GIS substation design including civil, structural, primary plant, P&C, and SCADA. Proficiency in engineering software such as AutoCAD, ETAP, Amtech, DIgSILENT, MicroStation, and CDEGS. Strong knowledge of IEC/IEEE standards and DNO/TSO requirements. Excellent communication and stakeholder management skills. Strong organisational skills with the ability to manage multiple projects simultaneously. Desirable: Chartered Engineer (CEng) status or working towards IET registration. Experience within ICP/ECP, utilities, or infrastructure environments. Exposure to EHV grid connections for renewable energy projects (solar, wind, BESS). Experience in project or design management within complex engineering environments. Strong commercial awareness and understanding of project delivery constraints. If you’re looking to develop your career within HV engineering leadership and play a key role in delivering critical UK energy infrastructure, send your CV to Lily at VIQU Energy today. Get in touch for a confidential discussion about this opportunity. Referral Bonus: Have someone in mind for this position? We offer rewards of up to £1,000 for successful introductions (T&Cs apply). To stay up to date with the latest industry opportunities, follow @VIQU Energy online

Job Title: Waste Water Technician / Engineer £45,000 - £50,000 + Overtime Company Van + Fuel Card + Paid Travel Monday - Friday - Day Shift This role offers a fantastic opportunity to work with cutting-edge waste water treatment plants across Yorkshire. Key Responsibilities: First line maintenance of all treatment systems, especially pumping stations Maintenance of industrial water pumps Breakdown support of all site maintenance across your local area Operate and monitor waste water treatment plants Monitor control systems for the treatment process Maintain accurate records of plant performance, maintenance activities, and compliance checks. Ensure compliance with health, safety, and environmental regulations. What We’re Looking For: Experience working in waste water plants, pumping stations, process plants etc. Experience completing preventative and reactive maintenance of pumping systems. Engineering Level 3 Qualification If you are interested in this Waste Water Technician / Engineer role, please submit an up-to-date CV through this advert. Maintenance Engineer / Pump Engineer / Pump Fitter / Field Service Engineer / Maintenance Technician / Multi Skilled Engineer / Mechanical Engineer

Job Title: LEV Service Engineer Location: Sheffield, South Yorkshire Salary/Benefits: £26k - £48k DOE + Training & Benefits Our client is a busy and growing LEV outfit, who specialise in Dust / Fume ventilation. They are seeking a reliable and hardworking LEV Service Engineer in Yorkshire, to cover a diverse portfolio of contracts. Applicants must hold the BOHS P601 and will be able to hit the ground running. Daily duties will include: LEV system testing / servicing, DOP testing and highlighting any system faults / compliance issues. Our client can offer the opportunity to train and gain further industry modules, in addition to competitive salaries and packages, including: company vehicle, fuel card and overtime opportunities. Applicants will be considered from: Sheffield, Doncaster, Rotherham, Barnsley, Dronfield, Worksop, Thorne, Goole, Snaith, Selby, Pontefract, Castleford, Wakefield, Huddersfield, Holmfirth, Dewsbury, Mirfield, Horbury, Normanton, Rothwell, Garforth, Leeds, Tadcaster, Wetherby, York, Horsforth, Pudsey, Morley, Batley, Brighouse, Bradford, Keighley. Experience / Qualifications: - Experience working as an LEV Service Engineer - Must hold the BOHS P601 as a minimum - Fully conversant in HSG 258 and COSHH guidelines - Great literacy, numeracy and IT skills - Flexible to travel in line with company needs - Strong interpersonal skills - Good literacy, numeracy and IT skills The Role: - Completing thorough testing and inspections on LEV, dust and fume ventilation systems - Emissions testing - HEPA and DOP filter testing - Replacing fans, belts and filters within existing systems - Identifying compliance / functionality issues with existing systems - Maintaining high levels of service with working to agreed deadlines - Producing detailed technical reports with pre and post work photographs - Adhering to safety guidelines - Working to agreed deadlines and project scopes Alternative Job titles: LEV Test Engineer, LEV Engineer, Dust / Fume Technician, LEV Install Engineer, LEV Test & Service Engineer, Project Engineer, Service Engineer, LEV Service Engineer, Commissioning Engineer. Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. Future Select Copyright 2026

Principal Control Systems Engineer Sheffield - Hybrid Full-time Are you ready to lead complex control systems projects from concept through to delivery? Do you enjoy combining technical leadership with client-facing responsibility? Could this be the step up where your engineering expertise shapes major projects in highly regulated environments? What's in it for you? ·Fantastic basic salary ·25 days annual leave plus 8 bank holidays, plus buy/sell up to 5 days leave per year ·Hybrid working - 2 days from home per week ·Flexible start and finish Times - Start between 7-10am and finish between 3-6pm, plus Flexi Fridays ·Pension contributions are 4.5% employer, subject to a 5% contribution by the employee ·Employee Health Cash Plan ·Life assurance What will you be doing? ·Leading the design, development and integration of advanced control systems ·Reviewing and approving system architectures, designs and technical specifications ·Taking ownership of testing, validation and commissioning activities ·Managing technical delivery across projects, including quality, performance and compliance ·Working closely with software, hardware, workshop and project teams to deliver successful outcomes ·Leading technical discussions with clients and project teams to resolve issues ·Supporting bids and providing technical sign-off during the tendering process ·Mentoring engineers, developing team capability and providing line management support ·Managing project resources, budgets, reporting and close-out activities Where you'll be doing it? You'll be joining a long-established engineering business with over 50 years of experience delivering digital transformation and system integration solutions across energy, nuclear and industrial manufacturing. The company works on complex, safety-critical projects and has a strong presence across the UK. What you'll need: ·At least 7 years' experience in systems engineering, hardware design or electrical design ·Strong knowledge of control systems and associated software and hardware ·Experience with tools such as AutoCAD Electrical, SCADA packages, PLC packages and HMI packages ·Experience applying systems engineering principles and system integration processes ·Good understanding of project management, including cost control and client management ·Basic understanding of contractual and commercial requirements ·Experience of software development and hardware integration ·Experience working on client sites ·Strong communication and presentation skills ·Ability to provide technical input during bids, including estimating time and effort ·Leadership experience, with the ability to mentor, guide and support engineering teams ·Experience in highly regulated industries would be useful We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

EC&I Hardware Engineer Location: Sheffield, South Yorkshire (Hybrid Working Available) Salary: £45,000 - £55,000 per annum The Opportunity Our client is continuing to grow, driven by an expanding pipeline of complex, bespoke engineering projects across a range of technically demanding industries. To support this growth, they are looking for an experienced EC&I Hardware Engineer to strengthen their engineering team. This is an opportunity to work in a collaborative, project-driven environment where no two projects are the same. Unlike highly repetitive manufacturing environments, their work is varied and challenging, allowing engineers to contribute throughout the full project lifecycle. You will collaborate closely with multidisciplinary teams to develop tailored engineering solutions from concept through to manufacture, commissioning, and customer support. The environment is fast-paced and delivery-focused, with priorities evolving as customer requirements change. As a result, they are seeking adaptable engineers who enjoy solving real-world technical challenges, managing multiple projects, and engaging with both customers and internal stakeholders. The Role As an EC&I Hardware Engineer, you will play a key role in the design and development of electrical and control systems for highly engineered projects. Working alongside Functional Safety and Automation Engineers, you will help translate operational and safety requirements into practical, compliant hardware solutions. Key Responsibilities Create electrical schematics and panel designs Produce EC&I engineering documentation Design control system architectures Support compliance and technical assurance activities Review designs against relevant engineering standards Work across multiple projects simultaneously Support project delivery from concept through to manufacture and commissioning Provide technical support during commissioning and customer-facing activities as required Essential Skills & Experience Proven experience within EC&I / Electrical Hardware Design Ability to design electrical systems and produce detailed schematics Strong technical problem-solving skills HNC, HND or higher qualification in a relevant engineering discipline Desirable Skills & Experience Experience reviewing and assuring engineering designs and documentation Exposure to safety-critical industries such as: Nuclear Defence Energy Process industries Working Arrangements Hybrid working available, with flexibility to work from home 1–2 days per week Travel and site work will vary depending on project requirements and project lifecycle stages Occasional UK-wide travel for commissioning activities and customer support Base Location: Sheffield, South Yorkshire (S9 area) Why Apply? Work on complex, bespoke engineering projects rather than repetitive production work Gain exposure across the full project lifecycle Collaborate with experienced multidisciplinary engineering teams Contribute to solutions within technically challenging and safety-critical environments Join a growing organisation with a strong pipeline of future work and excellent career development opportunities If you're an adaptable and technically capable EC&I Engineer looking to make a tangible impact on challenging engineering projects, we'd love to hear from you. About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas – recruiting, developing and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise – Business specialising in blue collar trade & technical services – permanent and temporary. Ford & Stanley Recruitment – Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search – Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance – Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy