Trabajos manufacturing supervisor en Reino Unido

This role focuses on those who have military experience interested in working in the private sector. Amazon Web Services (AWS) is seeking a Critical Facilities Technician to join our Data Center Engineering Operations (DCEO) team. In this role you will support the operation, monitoring and maintenance of the electrical and mechanical infrastructure that powers AWS cloud services. AWS data centers operate 24/7 and rely on highly reliable power and cooling systems. As a technician in this environment, you will perform hands-on maintenance, equipment inspections, and troubleshooting to ensure infrastructure systems operate safely and reliably. You will work as part of a team responsible for maintaining mission-critical equipment including power distribution systems, generators, UPS systems and cooling infrastructure. This role operates on a shift rotation supporting 24/7 data center operations. About the Team The Data Center Engineering Operations (DCEO) team is responsible for maintaining the critical infrastructure that supports AWS data centers. Our technicians operate and maintain complex mechanical and electrical systems that provide reliable power and cooling for AWS cloud services. The team works in a highly operational, safety-focused environment, where attention to detail and strong technical skills are essential to maintaining service availability. Ideal Candidate Backgrounds We welcome applicants with experience from a range of technical environments including: • Data centres or critical facilities, • Building services or facilities maintenance, • Industrial or manufacturing plants, • Utilities or power generation, • Military technical roles, • Large commercial facilities such as hospitals or airports Why AWS Amazon Web Services operates one of the largest and most advanced data center infrastructures in the world. Our facilities teams maintain the critical infrastructure that supports millions of customers globally. AWS provides opportunities to build technical skills in large-scale electrical and mechanical systems, while working in a highly collaborative and safety-focused environment. Career Development Technicians in the Data Centre Engineering Operations team have opportunities to develop into roles such as: • Senior Critical Facilities Technician, • Data Centre Engineering Operations Engineer, • Facilities Operations Supervisor, • Infrastructure Operations Manager AWS provides opportunities to develop deeper expertise in critical infrastructure systems, operational leadership and data centre operations. Work Environment • 24/7 mission-critical facility, • Shift-based operations, • Work with large-scale electrical and mechanical infrastructure, • Combination of hands-on maintenance, monitoring and operational support Key job responsibilities Key Responsibilities • Perform planned preventative maintenance (PPM) and reactive maintenance on electrical and mechanical infrastructure systems, • Conduct routine plant inspections and equipment checks to ensure systems are operating correctly, • Monitor alarms and system performance using Building Management Systems (BMS) and other monitoring tools, • Assist with fault finding and troubleshooting across infrastructure systems including power distribution and cooling equipment, • Support operation and testing of critical systems including diesel generators, UPS systems, switch gear and cooling equipment, • Supervise specialist vendors performing maintenance or repair activities on site, • Follow permit-to-work and safety procedures for all maintenance and operational activities, • Participate in incident response and support troubleshooting during infrastructure events, • Maintain accurate maintenance records and operational logs, • Support testing activities including generator tests and infrastructure fail over exercises A day in the life A typical shift may include: • Performing daily plant inspections across electrical and mechanical infrastructure, • Monitoring alarms and system status through the Building, • Management System (BMS), • Responding to infrastructure alerts and assisting with initial troubleshooting, • Carrying out planned preventative maintenance tasks on site equipment, • Supporting generator tests and infrastructure system checks, • Supervising vendors performing maintenance activities, • Completing shift logs, plant status reports and operational handovers About the team About AWS Diverse Experiences AWS values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. Why AWS? Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Inclusive Team Culture AWS values curiosity and connection. Our employee-led and company-sponsored affinity groups promote inclusion and empower our people to take pride in what makes us unique. Our inclusion events foster stronger, more collaborative teams. Our continual innovation is fueled by the bold ideas, fresh perspectives, and passionate voices our teams bring to everything we do. Mentorship & Career Growth We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve. • Experience working with electrical or mechanical infrastructure, • systems, • Hands-on experience performing maintenance, inspections or, • troubleshooting on plant equipment, • Knowledge of infrastructure systems such as:, • power distribution equipment, • generators, • UPS systems, • HVAC / cooling systems, • pumps, motors or industrial equipment, • Ability to follow operational procedures and safety standards, • Willingness to work in a shift-based environment supporting 24/7, • operations, • 2+ years of data center engineering operations experience, • Bachelors degree in electrical, mechanical or equivalent engineering Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. Lift Repairs Supervisor Responsible for carrying out major re... ZIPC1_UKTJ

Job Title: Machine Operator \n Location: Bexley - Thames Road / Foots Cray \n Salary: £14.67 per hour \n Job Type: Permanent, Full time \n Hours: 45 hours per week \n About Us: \n Countrystyle is a dynamic, privately owned resource management and waste recycling business. With a track record of spotting opportunities, understanding the market and driving innovative solutions, we deliver a reliable service which reduces the impact on the environment of our clients' waste, whilst creating cost-effective and reliable waste management outcomes which encourage a greener business acumen. \n About the role: \n To operate mobile and fixed plant to ensure the safe and compliant storage of designated waste streams/recyclables within nominated bunkers or containers at the operating sites to ensure the safe loading of vehicles for onward transfer of material from the operating sites. \n Note: In addition to these functions, employees are required to carry out such other duties as may reasonably be required. \n Responsibilities: \n\n • Operate appropriate machinery and plant, as required, to maintain the safe and efficient operation of the site at all times.\n, • Ensure that plant and machinery is maintained to required standards, including daily & weekly checks, refuelling, lubrication and greasing, and that defects and breakdowns are promptly recorded and reported.\n, • Maintain a safe working environment throughout your activities, including keeping working area tidy and access to walkways and emergency exits clear.\n, • Ensure appropriate safety equipment and PPE is used at all times.\n, • Checking of incoming loads, ensuring compliance with site license and permitted waste types.\n, • Immediately report: any contamination or non-conforming wastes delivered to site; accidents, incidents, and near misses; environmental hazards; health & safety breaches to the Supervisor or appropriate Manager.\n, • Undertake any training necessary to perform other tasks including the operation of other plant and equipment and/or supervisory duties.\n, • Complete Manual Handling activities to assist in waste management activities.\n, • Assist other operatives upon request and when authorised by your Supervisor.\n, • Carry out other operational duties where necessary for business continuity.\n, • Staff have a duty to take care of their own health and safety and that of others who may be affected by their actions at work.\n\n About you: \n Essentials: \n\n • Good Communication\n, • Ability to operate and control equipment\n, • Time and Priority Management\n, • Ability to work in a fast paced, busy environment\n, • Previous experience operating plant, such as loading shovels, telehandlers, 360\n, • A ticket for mobile/ fixed plant\n\n Desirable: \n\n • Problem Solving\n, • Experience in the Waste Industry\n, • Experience with Shredders, Shovels, Excavators & Conveyors\n\n Benefits: \n\n • Life Insurance with access to GP24\n, • Commitment to wellbeing through Employee Assistance Programme\n, • Electric Car salary sacrifice scheme for eligible employees\n, • Cycle to work scheme\n, • Company Events\n, • GymFlex salary sacrifice\n\n Please click on the APPLY button to send your CV for this role. \n Overseas candidates will NOT be considered for this role. We are not sponsoring Visa's at this time, so please refrain from applying unless eligible to work in the UK. \n Candidates with experience or relevant job titles of; Machine Operative, Manufacturing Operative, Manufacturing Engineer, Production Operative, Production Technician, Plant Operator, Plant Machine Operator, Mechanical Technician, Production Operative, Plant Operative, Machine Technician may also be considered for this role.

ELECTRICAL & INSTRUMENTATION SUPERVISOR\n Job Title – Electrical & Instrumentation Supervisor Location – Erith Salary – £60,000 - £65,000 Shift – M-F Days Job Role of the Electrical & Instrumentation Supervisor\n An exciting opportunity has become available for an experienced Electrical & Instrumentation Supervisor to work for a blue-chip industrial manufacturing company within the heavy industrial en... \n \n \n \n \n ZIPC1_UKTJ

Production Supervisor (Food Manufacturing)£50,000 - £55,000 + Autonomy + Progression + Company Growth + Free Parking + Company BenefitsSomersetAre you a Food Production leader from a manufacturing background with experience in sauces, condiments or FMCG production, looking for an opportunity to build and lead a manufacturing operation from the ground up within an ambitious and rapidly growing business?On offer is the opportunity to join an innovative food manufacturer at an exciting stage of its journey. You'll play a pivotal role in establishing a brand-new production facility, implementing large-scale manufacturing processes and building your own team as the company continues its ambitious expansion plans.This forward-thinking business is investing heavily in its manufacturing capabilities and has developed a unique, sustainability-focused supply chain. Continued growth and increasing demand have created the need for an experienced Production Manager to take ownership of production and help shape the future of the company.In this varied role, you'll oversee all aspects of manufacturing, from production planning and inventory management through to quality, maintenance and continuous improvement initiatives. You'll have significant autonomy to implement your own ideas, improve processes and develop a scalable operation capable of supporting long-term growth.The RoleBuild and develop a new food manufacturing operationLead all day-to-day production activitiesRecruit, train and manage the production teamImplement manufacturing processes and continuous improvement initiativesManage inventory, procurement and supply chain activitiesEnsure quality, food safety and regulatory complianceDrive efficiency, reduce waste and improve productivityThe PersonProduction Supervisor from a food manufacturing backgroundExperience within condiments, sauces or FMCG manufacturingStrong understanding of ERP systems, production planning and supply chain managementReference: BBBH26185Keywords: Production Manager, Food Manufacturing, FMCG, Condiments, Sauces, Manufacturing Manager, Production Supervisor, Factory Manager, Continuous Improvement, Somerset.If you're interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&Cs, Privacy Policy and Disclaimers which can be found on our website.TPBN1_UKTJ

Production Team Leader (FMCG / Food Manufacturing)£30,000 - £40,000 + Flexible Shift pattern+ Permanent Position + ProgressionHowden, East YorkshireAre you a Production Team Leader, Supervisor or similar with experience within FMCG, food manufacturing or packaging environments looking for a hands-on leadership role where you can drive production efficiency and lead a team within a busy manufacturing environment?On offer is the opportunity to join a well-established food production business as a Production Team Leader. This role will see you take responsibility for the day-to-day running of production lines, supporting the Packhouse Manager and ensuring targets, quality standards and health and safety requirements are consistently achieved.You will be responsible for organising labour, monitoring production performance, improving efficiencies and motivating a team of Production Operatives to achieve business and customer requirements. This is a varied role within a fast-paced environment, offering the opportunity to make a real impact on production processes and continuous improvement.This role would suit a Production Team Leader, Line Leader or Supervisor with experience in FMCG, food manufacturing, packaging or similar environments, looking for a stable role with responsibility and progression opportunities.The Role:Leading and motivating a team of Production Operatives to achieve daily production targets, while supporting training, development and performance management.Planning and organising labour across production lines to maximise efficiency, monitor KPIs, reduce waste and drive continuous improvement.Ensuring compliance with food safety, hygiene, quality and health & safety procedures, including accurate production records, quality checks and downtime reporting.Working closely with Production Managers and Technical teams to resolve operational issues, maintain standards and support the smooth running of production. 40 hours per week on a rota basis, including weekends and bank holidays.The Person:Previous experience as a Team Leader, Line Leader, Supervisor or similar within manufacturing, FMCG or packagingGood understanding of food safety, hygiene and quality standardsBasic Food Hygiene qualification (HACCP desirable)Commutable to Howden, East YorkshireReference:BBBH25849AKeywords: Production Team Leader, Production Supervisor, Line Leader, Manufacturing Supervisor, FMCG, Food Manufacturing, Food Production, Packaging, Packhouse, Production Operative, Team Management, Staff Training, KPI Reporting, Continuous Improvement, Lean Manufacturing, HACCP, Food Hygiene, Quality Control, Health and Safety, GMP, Shift SupervisorIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Reward and Benefits on Offer;Progression opportunitiesGenerous annual leave allowance and pensionA prestigious blue-chip employerImmediate start availableCycle to work schemeFree on-site parkingHealth & wellbeing programmeLife insuranceMTrecs New Opportunity;MTrecs prestigious manufacturing client is looking to recruit a Shift Supervisor to join their growing organisation. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employerIf you have experience in press a leadership role within engineering/manufacturing, apply now for an immediate response!The Job Youll Do;Leading and supervising skilled and semi-skilled machine operators to ensure safe, efficient, and high-quality performance.Monitoring daily team performance to ensure work is completed efficiently and meets customer requirements.Ensuring operators adhere to production schedules while tracking progress and addressing any delays.Planning and allocating resources effectively to meet production demand and customer delivery deadlines.Monitoring jobs throughout the production process, adjusting schedules as required to achieve customer SLAs and delivery targets.Maintaining regular communication and collaboration with cross-functional departments.Attending and actively contributing to production planning and customer project meetings.Developing, delivering, and maintaining operator training programmes, while onboarding and integrating new employees into the business.Coordinating and maintaining preventative maintenance schedules to maximise equipment reliability.Identifying, developing, and implementing process improvements to enhance production efficiency, quality, and overall performance.About you;Experience working in a supervisory/managerial role within engineering/manufacturingMust be highly organised, structured, and flexible.Ability to work under pressure to meet deadlines whilst keeping a calm, level-headed approach.Ability to think on their feet, changing production priorities at a moments notice.Ability to manage individuals on a one-to-one basis as well as team projects.Leadership, motivational and conflict management skills.Good decision-making skills, ability to delegate and have a can do attitude.Good spoken and written communication skills.Knowledge of Microsoft Office productsExperience working with lean manufacturing tools such as 5S or Kaizen.TPBN1_UKTJ

Manufacturing Supervisor (4 Day Working Week)PocklingtonUp to £38,000 + Overtime + Free Parking + On-site Canteen + Casual DressAre you a Manufacturing Supervisor or similar with a background in manufacturing looking to join a well-established company offering a fantastic 4-day working week where you can lead a close-knit team and play a key role in production?Do you want to join a long-established manufacturer that invests in its people, offering long-term stability and the opportunity to develop your leadership skills while producing high-quality composite panel systems for the commercial vehicle industry?On offer is a fantastic opportunity to become part of an established manufacturing business, where you will oversee a small production team, ensure production targets are achieved, and maintain the highest standards of quality and health & safety.This role would suit a Manufacturing Supervisor or similar with experience operating CNC machinery or laminating equipment or similar, and looking for a stable position with an excellent work-life balance through a Monday to Thursday working pattern.In this role, the successful Manufacturing Supervisor or similar will lead a small production team, coordinate daily production activities, ensure quality standards are met, monitor team performance, and maintain a safe and efficient working environment while supporting continuous production across the manufacturing facility.The Role:Leading and supporting a small production team within a busy manufacturing environmentCoordinating production plans with machine operators to meet daily targetsOperating and supporting CNC machinery, beam saws and panel laminating glue lines where requiredEnsuring quality standards are maintained through inspections and dimensional checksRecording scrap and reject data while promoting continuous improvementMaintaining high standards of health & safety and housekeepingMonday to Thursday, 7:00am - 5:30pm (4-day working week)The Person:manufacturing supervisory or Production Team Leader or similar backgroundExperience operating CNC machinery, beam saws, laminating glue lines or similar equipment (Preferred)Previous experience supervising or leading production teamsCounterbalance Forklift Licence (preferred)Reference Number: BBBH26320Keywords: Production Team Leader, Manufacturing Team Leader, Production Supervisor, Manufacturing Supervisor, CNC Operator, Beam Saw, Laminating, Composite Panels, Production, Factory Supervisor, Team Leader, FLT, Forklift, Manufacturing, Pocklington, East YorkshireIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job is not quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Job Title: Maintenance Engineer (nights) Maintenance EngineerLocation: EveshamSalary:Up to £58,000 for NIGHTSShift Pattern: Panama (Nights4 on 4 off)As a Maintenance Engineer, you will be responsible for maintaining and improving production machinery, ensuring maximum uptime and efficiency across the site. Working closely with the Engineering Supervisor and production teams, you will play a key role in delivering proactive and reactive maintenance support.Key Responsibilities for this Maintenance Engineer Role:Carry out planned preventative maintenance (PPM), fault finding, and repairs on production equipmentDiagnose electrical and mechanical faults and implement effective solutionsSupport continuous improvement initiatives to enhance equipment reliability and performanceAssist with installation, upgrades, and project work across the siteEnsure all work is completed in line with health & safety and company proceduresLiaise with production and engineering teams to minimise downtimeSupervise contractors and ensure compliance with site standardsReport recurring faults and recommend improvementsRequirements for this Maintenance Engineer Role:Electrically biased with strong mechanical understandingExperience within a manufacturing or production environmentBasic PLC fault-finding knowledge preferredStrong problem-solving skills and a proactive mindsetFlexible and reliable, with the ability to work Panama-style shiftsComfortable working in a chilled environmentClick Apply, or contact Saffron Giddings-01296737349Thank you for your application. Due to the volume of applications, we cannot respond to everyone personally. If you haven't heard back within 5 working days, please assume your application has been unsuccessful. To view other vacancies, please visit our website.Ref: INDMIDTPBN1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role We are looking for Service Engineers to join our Service team East London and surrounding areas. If you have a comprehensive Lift engineering background, including an NVQ 3 in Lift Engineering or equivalent we want to hear from you! Key Responsibilities Carrying out regular planned preventative maintenance and service visits Meeting agreed customer response times, building relationships with our clients Providing regular updates to the Service Supervisor/ Service Manager Problem solving and working on your own initiative What Were Looking For NVQ 3 in Lift Engineering Experience of working with Lifts Strong customer skills A clean UK Driving License Flexible Hours If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you. Why Join ORONA? We offer more than just a job we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary : Competitive pay that reflects your skills and experience Generous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future : Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind : Life Inssurance to support you and your loved ones Health & Wellbeing : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits : Enhanced leave for family-related events and emergencies Support When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care : Eye care vouchers to help keep your vision sharp Recognition for Longevity : Long Service Awards to celebrate your milestones with us Referral Rewards : Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth : Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day. Requirements Requirements A clean UK Driving License Must be eligible to work in the UK TPBN1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity.The Role - Lift Repairs EstimatorResponsible for identifying repair work opportunities; compiling quotations for repair works and progressing with customers to gain chargeable orders. Liaises with service & account managers in regional offices to maximise chargeable repair order opportunitiesReviews customer orders gained and accurately prepares repairs package for handover to relevant Repairs Supervisor for completionKey ResponsibilitiesReview maintenance reports and engineer notes to identify repair opportunities.Create accurate, timely quotations for repairs and insurance requests.Follow up with clients to ensure quotes are received and understood.Convert quotes into orders by building trust and offering solutions.Support admin tasks in the regional service office, including handling calls.What Were Looking ForPrevious experience in the lift industry is essential, ideally in a sale or estimating capacity.Strong interpersonal and communication skills, with the ability to build effective relationships with clients.Excellent organizational skills and the ability to manage multiple tasks in a fast-paced environment.Proficiency in IT tools and systems related to quoting and customer management.If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you.Why Join ORONA?We offer more than just a job we offer long-term career development within a stable and growing company.What We Offer:Attractive Salary : Competitive pay that reflects your skills and experienceGenerous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidaysSecure Future : Benefit from a pension scheme with increasing company contributions as you grow with usPeace of Mind : Life Insurance to support you and your loved onesHealth & Wellbeing : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP servicesFamily-Friendly Benefits : Enhanced leave for family-related events and emergenciesSupport When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challengesEye Care : Eyecare vouchers to help keep your vision sharpRecognition for Longevity : Long Service Awards to celebrate your milestones with usReferral Rewards : Earn a Recruitment Referral Fee by helping us find top talentContinuous Growth : Ongoing Training & Development opportunities to support your career journeyJoin ORONA and be part of a company moving the world safely and efficiently every day.TPBN1_UKTJ

Stock Controller / Stores Supervisor c36k + BonusSouth East - Perm Ref: ABJ6718We are seeking an experienced Stores Supervisor / Stock Controller to join a successful and well-established engineering and manufacturing business. This is an excellent opportunity to play a key role in supporting production operations while driving continuous improvement within the Stores function.As a key member of the operations team, you will be responsible for the day-to-day management of the Stores area, ensuring the efficient receipt, storage, control, and distribution of materials, components, consumables, and tooling required to support manufacturing activities.As Stores Supervisor you are critical in maintaining stock accuracy, material traceability, inventory control, and timely material availability across the business. As stock controller you will work closely with Production, Purchasing, Planning, and Quality teams to ensure materials are managed effectively and efficiently.Key Responsibilities Stores Management & Inventory ControlOversee the receipt, storage, issue, and movement of all materials, components, consumables, and toolingMaintain accurate stock records and material traceability using ERP/MRP systemsMonitor stock levels and coordinate replenishment requirements with PurchasingConduct regular stock checks and cycle counts to ensure inventory accuracyInvestigate and resolve stock discrepancies, implementing corrective actions where requiredEnsure all materials are correctly identified, stored, and maintained to quality and traceability standardsGoods Inwards & DespatchManage receipt and inspection of deliveries, ensuring goods match purchase orders and documentationLiaise with suppliers, Purchasing, and Quality regarding shortages, damages, or non-conforming materialsProcess delivery notes and associated documentation accurately and in a timely mannerCoordinate packing and despatch of customer and supplier consignments, ensuring safe and on-time deliveryArrange and monitor courier and transport collections as requiredProduction SupportPick, prepare, and issue job kits and materials in line with production schedulesWork closely with Production Supervisors to support operational requirements and minimise downtimeTeam LeadershipProvide day-to-day supervision and guidance to Stores personnelAllocate workloads and priorities to ensure efficient operationsContinuous Improvement & ComplianceIdentify opportunities to improve material flow, stock control, storage methods, and efficiencyEnsure compliance with Health & Safety, Quality, Environmental, and company proceduresQualifications & ExperiencePrevious experience in a Stores, Warehouse, Logistics, or Inventory Control roleStrong organisational and administrative skillsGood understanding of stock control procedures and material traceabilityCompetent IT skills, including Microsoft OfficeSupervisory or team leader experienceExperience within an engineering or manufacturing environmentForklift Truck licence (training can be provided)Experience with ERP/MRP systemsWorking Hours - 39hrs week, £18/hr- Perm- c36k Monday to Friday (early finish Friday) Overtime is generally available and paid at 1.5x hourly rate. Annual bonus based on company performance + range of other benefits To Apply: Contact Alison Basson - 07814 547440 Ref: ABJ6718TPBN1_UKTJ

CNC Production Supervisor (Manufacturing)£50,000 - £60,000 + Training + Progression + Christmas Bonus + Half Day Friday + Free ParkingWatfordAre you a CNC Production Manager, Senior CNC Setter or Programmer with experience on Sliding Head Lathes looking to take the next step into a leadership role with a well-established precision engineering company offering autonomy, overtime and an early finish every Friday?Do you want to join a specialist manufacturer of high-precision components where you'll lead the day-to-day operation of the machine shop while remaining hands-on with Citizen or Star Sliding Head Lathes, ensuring production targets and quality standards are consistently achieved?This company is a trusted name in high-precision component manufacturing, supplying industries that demand the highest standards. Due to continued growth, they are looking to recruit a CNC Production Manager to oversee workshop operations, manage production schedules and support the continued development of their machining department.In this role, you will manage the day-to-day running of the workshop while setting and programming Citizen or Star Sliding Head CNC lathes, producing prototype and small to medium batch components in materials including stainless steel, aluminium and brass. You will ensure delivery deadlines are met, maintain ISO9001 quality standards and support continuous improvement across the production facility.This role would suit a CNC Production Manager or an experienced Senior CNC Setter/Programmer with Sliding Head Lathe experience looking for a long-term opportunity with a growing precision engineering company offering overtime, bonuses and excellent working conditions.The Role:Manage the day-to-day operation of the CNC workshopSet and programme Citizen or Star Sliding Head CNC LathesManufacture prototype and small to medium batch precision componentsRead and interpret engineering drawingsEnsure production schedules, quality standards and ISO9001 compliance are maintainedMonday to Friday (Half Day Friday) with overtime availableThe Person:Experience setting and programming Sliding Head CNC LathesCitizen or Star machine experienceBackground in precision engineering manufacturingReference Number: BBBH26078Keywords: CNC Production Manager, Sliding Head, Citizen, Star, CNC Programmer, CNC Setter, CNC Lathe, Precision Engineering, Workshop Manager, Manufacturing Manager, Production Supervisor, WatfordIf you're interested in this role, click 'Apply Now' to send your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.TPBN1_UKTJ

Production Supervisor (Bespoke Manufacturing)£30,000 - £40,000 + Rapidly growing company + Equity + Company Bonus + Days Based + Monday to Friday + Progression + Company BenefitsSouthwarkAre you a Production Supervisor or similar looking for a varied role overseeing a tight-knit team within a dynamic, forward-thinking company with an international presence who are establishing UK operations offering the chance to upskill yourself and continually progress?This company specialises in the manufacture of precision components for a range of major industries including Aerospace, Defence and Robotics with a presence across multiple continents. They have recently established UK operations through numerous factories and are looking for new Production leaders to help drive this growth.In this autonomous role you will be one of the Production Supervisors responsible for organising all shift activities for a tight-knit team of machinists and operatives. You will oversee workload, lead KPIs and support the team members with training as you work either day or night shifts (with flexibility in this and shift allowance available).This position would suit a Production Supervisor or similar looking for a one of a kind role in a dynamic business who provide a range of progression opportunities and equity.The Role: • Oversee tight-knit production team, • Organise and lead shift activities to ensure targets are achieved, • Liaise with other departments and report to Production Manager, • Receive equity and opportunities for ongoing progression, • Opportunities to work day or night shifts The Person: • Production Supervisor or similar, • Looking to join a high growth, dynamic company, • Commutable to Southwark Production, Supervisor, Manufacturing, Engineering, Team Leader, Manager, Technician, Engineering, Aerospace, CNC, Machine Shop, London, Southwark, City, Croydon, Bermondsey, LambethReference number: BBBH26168If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Refrigeration EngineerCroydon / Clapham£47,676.66 OTE £55K - £60K (salary including on call standby 1:4)PermanentMy client is on the lookout for an experienced Refrigeration Engineer to join the team. You will have the opportunity to work on one of their leading supermarket contracts.The role will involve maintaining, servicing and repairing Refrigeration Equipment in customer locations and provide assistance to HVAC equipment containing refrigeration circuits.Key Responsibilities – Refrigeration EngineerPrioritise maintenance and repair work to achieve agreed timescales and response times.Identify non-repairable faults promptly advise the Line manager of findings, with recommendations regarding suitable replacements.To ensure PPM schedules are completed within agreed timescales and that all necessary paperwork is completed accurately and to the laid-down procedures.Ensure that all technical and compliance paperwork is always completed and up to date.To order and fit parts or components as prescribed by company procedures.To advise the GSMs of any repair, maintenance and installation issues that are likely to affect the smooth running of the store and to build rapport and promote the spirit of partnership with all GSM's.To carry out surveys and complete reports as required by the refrigeration supervisor/ RFM.Qualifications & Experience – Refrigeration EngineerNVQ / SVQ Level 2 or 3 in Refrigeration & Air ConditioningF-Gas Category 1 (C&G 2079-1)Flexible to be part of the 24/7 on-call rota every 1:4 weeks.Full driving license.On Offer – Refrigeration Engineer£47,676.66 OTE £55K - £60K (salary including standby 1:4)40 hour week25 days + 8 bank holidaysTravel time after ½ hour each wayVan, fuel card, tools, uniform, IT equipment providedFor more information on this role, please contact Harry Waller on 01453 829778 or send a copy of your CV toOmega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors.For details of other opportunities available within your chosen field please visit our websiteOmega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

Job Title: High Level Technician (Rolling Stock) Job Location: Southwest London Hourly Pay Rate: £31.48 PAYE / £ 41.11 Umbrella Shifts: Minimum of 50 hours a week Shift Pattern: Panama . Days and nights Duration: On-going contract Start Date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Client Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 345 Crossrail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service, and resolve any issues on the network. The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. Strong report writing skills. Qualifications: Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems * Changing relay boxes / Wiper motors If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to (url removed) OR call (phone number removed). PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION. Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise. Please note the above job specification could be subject

Cable Assembly Operative £13ph holiday accrued or £14.50ph Holiday paid Southall Proactive are urgently recruiting for Cable Assembly Operative to works in our busy cable department assembling data and power cables to a high standard of quality. Responsibilities include: Carry out the cable assembly process, including soldering, as instructed by following printed assembly instruction documents Carry out custom labelling of cable assembly products as instructed by supervisor and by following printed custom label instruction documents Carry out quality control of cable assemblies following written instructional documents Advise Cable Lead of any broken, incomplete parts, as well as inconsistencies/safety hazards. Transport connectors and cables from warehouse to assembly area Stack/organize completed cable assemblies per work order or sales order Test all cables and place individual tested labels on "main" cablesSkills/Requirements Good working knowledge of, or willingness to learn, basic connectivity issues and assembly concepts Soldering skills Cable assembly experience Electrical assembly experience Electronic assembly experience Experience working with electrical connectors, cable, or wires Familiarity with the use of hand tools - especially electrical hand tools (wire cutters, wire strippers, connector crimp tools etc)Hours: 8.00am-4.30pm Monday to Friday Location: Southall, UB2 Rate : £13 holiday accrued or £14.50 Holiday paid How to Apply: For more information on the role, or any discussion regarding opportunities we have available, please contact Namandeep Kaur on (phone number removed) or . Why work with Proactive? Proactive Technical Recruitment is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Our client is a very successful manufacturing business and Staffbase have been appointed to recruit for the position of Engineering Supervisor. Salary £65K + Benefits We are seeking an experienced electrical bias engineer with excellent management and/or supervisory experience to manage and control all maintenance and CAP-ex projects activities at a large heavy industry processing plant near Croydon. The Role: The Engineering Supervisor will be responsible for overseeing all planned & reactive maintenance activities and some CAPEX project work. Your duties will include but is not limited to the following; Maintain and develop the existing CMMS Management & control of a small team of maintenance engineers and also external contractors Plan, manage and control all maintenance activities and engineering projects Effective Budget and CAPEX Project management Monitoring, sourcing and ordering spare and replacement parts Ensure adequate staff training, recruitment and disciplinary needs are met Adopt a continuous improvement approach and help to deliver efficiency and cost savings where possible Ensure compliance with all legal and HSE requirements Provide "Hands-on" assistance with electrical and mechanical engineering maintenance and repair of plant and machinery. Candidate: You will be a multiskilled engineer with electrical bias and you will have previous engineering supervisor or manager role. Applicants will have previous experience in the manufacturing or industrial sector e.g. plastics, metals, quarry, recycling or chemical plants. You will have at least 5 years management /supervisory experience and you must me confident in leading a team of engineers and external contractors. You will hold recognised electrical engineering qualification and ideally you will be trained in health & safety management to IOSH or NEBOSH level. You will have a recognised qualification in electrical engineering e.g. HNC, degree or 18th edition certification and you will have good knowledge and understanding of plc systems. We are seeking a highly organised and effective leader who will maintain a visible presence on the shop floor. Hours of Work: Monday to Friday Benefits: Excellent basic salary Negotiable £65K + benefits Bonus 31 days annual leave Pension

Lift Repairs Supervisor At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role of the Lift Repairs Supervisor Responsible for carrying out major repairs to lifts within allocated area. Plans jobs to ensure parts are available and delivers repairs safely, on time and within budget. Responsible for the supervision and development of Repairs engineers and sub contract labour. Required to deliver accurate and timely paperwork supporting the Company's work procedures. In exceptional circumstances will stand in as part of the local service team on-call rota. Key Responsibilities • Carrying out major repairs to lifts within allocated area., • Plans jobs to ensure parts are available and delivers repairs safely, on time and within budget., • Supervision and development of Repairs engineers and sub contract labour., • Deliver accurate and timely paperwork supporting the Company's work procedures. In exceptional circumstances will stand in as part of the local service team on-call rota. What We’re Looking For • Senior Rep...

Production Line Leader, Team Leader, Food Production Team Leader, Factory Team Leader, Production Supervisor, Production Team Leader, Food Manufacturing Team Leader, Manufacturing Team Leader, Manufacturing Supervisor, Food Factory Team Leader, Production Supervisor or similar role. This is a hands-

CNC Production Manager, Sliding Head, Citizen, Star, CNC Programmer, CNC Setter, CNC Lathe, Precision Engineering, Workshop Manager, Manufacturing Manager, Production Supervisor, Watford. CNC Production Supervisor (Manufacturing). Due to continued growth, they are looking to recruit a CNC Production

Production Supervisor (Bespoke Manufacturing). Are you a Production Supervisor or similar looking for a varied role overseeing a tight-knit team within a dynamic, forward-thinking company with an international presence who are establishing UK operations offering the chance to upskill yourself and co

The role : As a Production Supervisor in one of our manufacturing or packing areas you will be directly responsible for and will deliver day to day performance.

Are you an Engineering Manager or Supervisor with an Electrical or Electronics engineering background from a manufacturing environment, looking to join a well-established company in a highly autonomous leadership role?. This is an excellent opportunity to lead a skilled engineering team within a mod

HYGIENE SUPERVISOR Job Title - Hygiene Supervisor Location - Rochester, Kent Salary: £35,000 Shift: Monday to Friday, 6:00am – 4:00pm Job Role of the Hygiene Supervisor. A fantastic opportunity has opened for an experienced Hygiene Supervisor to join a stable and well-established food manufacturing business. This is an excellent opportunity for a hygiene professional with leadership experience to take ownership of hygiene operations across the site, ensuring the highest standards of food safety, hygiene compliance, and operational excellence are consistently achieved. The successful candidate will lead and develop the hygiene team, oversee cleaning schedules and hygiene standards, and work closely with production and other departments to ensure compliance with all food safety and health & safety requirements. Sector – Manufacturing Non-Negotiable Requirements of the Hygiene Supervisor. Proven hygiene experience within a food manufacturing environment. Desireable Requirements for the Hygiene Supervisor. Experience working within the UK food manufacturing sector. Knowledge of COSHH regulations and chemical management. Experience supporting continuous improvement initiatives. Previous experience deputising for a Hygiene Manager. The Hygiene Supervisor will benefit from: Employment with a stable and well-established organisation. Competitive salary package. Monday to Friday working pattern. Pension scheme. 22 days holiday allowance. Ongoing training and development opportunities. Opportunity to progress within a successful manufacturing environment. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Nathan Lock at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. TPBN1_UKTJ

Electronics Assembly Person Job Description To assemble, solder and wire all PCB assemblies and units to IPC-JSTD-001 and relevant modules, To ensure inbuilt quality by following routers and inspecting own workmanship, To interpret and apply all drawings, instructions and documentation related to the manufacturing of electronic products, To conformal coat and apply adhesives to product as specified in manufacturing drawings, To proactively assist the Production Supervisor to ensure the smooth running of the department and raise any issues in a timely manner, To undergo training to remain IPC certified, To assist colleagues where required, To have a keen eye for detail and look for opportunities for continuous improvement; working to best practice, To carry out duties in a proper and efficient manner, act wholeheartedly in the interest of the Company at all times and to comply with the Company Rules and Regulations, Responsible for ensuring that a high standard of housekeeping is maintained, Responsible for ensuring that all Health & Safety Policies are adhered to, To carry out any other tasks where reasonable and relevant, when required. Requirements Ability to work independently while collaborating in a team environment Ability to work under pressure and to deadlines Team Player Strong Work Can-do Ethic Exceptional at building relationships Excellent Customer Service skills Strong attention to detail and time management Exceptional Planning and Organisation skills High awareness of Productivity and Quality Excellent Communication skills Flexibility Takes Responsibility for actions Learn, Apply and Improve Benefits Health Care Cash Plan Employee Assistance Programme Contributory Pension Scheme for eligible employees (6% increasing to 7%) Enhanced holiday (24 days holiday in addition to UK bank and public holidays) Life Assurance Company Sick Pay Scheme* Flexitime Early finish on Fridays Sports and Social Club Free car parking Free access to a local gym Onsite café (Available after 1 yearofservice) (* Based in Rochford / Southend on Sea) TPBN1_UKTJ

Description Join Trant Engineering and help deliver complex, high-impact engineering projects. Trant Engineering is a leading Engineering, Procurement and Construction (EPC) contractor with a proven track record of delivering innovative engineering solutions across the UK and internationally. Employing over 1,000 people and with an annual turnover of £150 million, we continue to grow and are looking for an experienced Electrical Supervisor to join our team, initially based on our clean water treatment works near Hardham in West Sussex. The Role As an Electrical Supervisor, you will lead and supervise site-based electrical teams and subcontractors, ensuring that all electrical installation works are delivered safely, efficiently, and to the highest standards. Working closely with project managers and mechanical and civil disciplines, you will coordinate day-to-day site activities, monitor progress, and ensure work is completed in line with project programmes, technical specifications, and UK electrical regulations. You will also be responsible for maintaining accurate site documentation, supporting quality assurance and inspection activities, promoting a strong safety culture, and ensuring that all electrical works are delivered on time and to the required quality standards. What Youll Be Doing 1) Team Supervision & Leadership Supervise electrical operatives, electricians, apprentices, and subcontractors on site. Allocate work based on competence, project priorities, and programme requirements. Monitor productivity, workmanship, and compliance with specifications. Provide technical guidance and mentoring to junior electrical staff. 2) Electrical Installation & Project Delivery Oversee installation of electrical systems including containment, cabling, control panels, MCCs, motors, pumps, instrumentation interfaces, and power supplies. Ensure electrical works comply with design drawings, schematics, and specifications. Coordinate electrical activities with civil, mechanical, and process teams. Support electrical testing, inspection, and commissioning activities. 3) Health, Safety & Environment (HSE) Enforce site health, safety, and environmental procedures in line with UK legislation. Ensure compliance with Electricity at Work Regulations 1989. Conduct toolbox talks, risk assessments, and method statement briefings. Ensure safe isolation, lock-off, and permit-to-work procedures are followed. Investigate and report incidents, near-misses, and unsafe practices. 4) Quality Assurance & Compliance Ensure electrical installations meet BS 7671 (IET Wiring Regulations) and project standards. Inspect completed works and ensure defects are rectified promptly. Support FAT/SAT, ITPs, and QA/QC processes. Ensure compliance with client, regulatory, and water industry standards. 5) Documentation & Reporting Maintain accurate records of daily activities, workforce attendance, and materials used. Review and sign off electrical test results, inspection records, and commissioning documentation. Assist in preparing progress reports, as-built records, and handover documentation. Ensure electrical documentation is complete, accurate, and compliant. 6) Communication & Coordination Liaise with Project Managers, Site Engineers, Site Mangers and Client representatives. Coordinate subcontractors and suppliers to ensure timely delivery of works. Communicate progress, risks, and resource requirements effectively. 7) Core Values Uphold and promote the Companys Core Values Care, Trust, Respect and Sustainability. What Were Looking For Essential JIB / ECS gold card NVQ Level 3 in Electrical Installation 18th Edition Wiring Regulations (BS 7671) SSSTS Electrical installation on industrial or infrastructure projects (5-7years) Experience in a supervisory role (2-3years) Full UK driving licence Applicants must have the existing right to work in the UK, as we are unable to provide sponsorship for this role. Desirable 2391 Test & Inspect or equivalent IPAF / PASMA tickets Why Join Trant? At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands-on delivery. We offer end-to-end capabilities from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in-house expertise. This means youll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in-house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, its an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether youre starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes: Competitive rates. 28 days holiday (including bank holidays). Options to buy additional holiday via salary sacrifice. Company pension scheme. Employee assistance program. Discretionary annual bonus. Join us and be part of something bigger. TPBN1_UKTJ

Maintenance Technician £38,500 Wrexham Days Only (Mon-Fri) gap technical are proud to be representing this global manufacturing business in their search for a Site Maintenance Technician to work at their facility based near Wrexham Performance Objectives Respond to equipment breakdowns, production lines, plant and machinery, diagnose and repair applying fault finding and repair skills with minimum downtime to operations. Communicate with other departments, providing regular updates on repair timelines and potential impacts. Assist with developing planned maintenance schedules for routine inspections on equipment, building and facility inspections optimising time and resources effectively. Conduct routine equipment, building and facility inspections to ensure ongoing functionality and compliance, report maintenance needs, repairs and potential issues. Supervise and support contractors/tradesmen (e.g. electricians, plumbers, engineers) during installations, repairs or maintenance tasks. Monitor inventory of materials and equipment, ensuring the availability of necessary materials and equipment. Contribute to projects coordination (e.g. cost reductions initiatives and operational improvements). Maintain strict adherence to quality, environmental and health and safety regulations. Provide support to the production department, helping achieve efficiency and operational targets. Support the Senior Maintenance Supervisor to achieve department objectives, KPI's and strategic plans. Step in for the Senior Maintenance Supervisor when required. Work as an integral part of all the company call out plan procedures. Ensure all work is undertaken to the highest standards, following company policies and procedures, while upholding health and safety protocols. Operate forklift truck and lifting equipment safely, ensuring proper use of PPE and adherence to safety requirements. Person Specification C&G L3 Electrotechnical Technology Installation NVQ L3 18th Edition Boom Lift MEWPs Forklift Truck Experience in a technical maintenance environment Experience working in a Manufacturing environment 3+ years' experience in a Senior Technician role Strong fault-finding and troubleshooting abilities with a proactive approach to problem-solving. Excellent communication skills, with the ability to coordinate effectively across teams. Strong organizational skills, capable of meeting strict deadlines. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 03/08/2026 'By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy.' TPBN1_UKTJ

Injection Moulding Technician. In this role you will set up and run moulding production orders using existing set programs, monitoring quality output throughout the shift. You will be passionate in achieving Right First Time and Just in Time manufacture of plastic components using advanced Moulding techniques, working with and to standard work instructions and practices. Reporting to: Technical Manager. Salary: £16.50 ph Hours: Rotating Shifts 6-2 & 2-10. With cover on nights if required With 4:30am startup on Mondays when covering early shift. This attracts a £3.00ph Night Shift premium. Responsibilities To take responsibility for the setting and conditioning of injection mould tools in order to satisfy production orders. Attending to alarms and faults, employing permanent corrective actions. Ensuring the quality of production, controlling processing parameters against industry standards and in line with the costed requirements of the product. Routine maintenance and fault finding of injection moulding machines. Basic electrical knowledge. Routine maintenance and fault finding of injection moulding tooling. Maintain accurate records of all work undertaken for traceability. To supervise staff on shift to manage break cover etc.only when then Supervisor is not on shift. To be responsible for preparation of auxiliary equipment, jigs, fixtures, and assembly machines to ensure production requirements are met. Carry out quality checks in line with company standards. To utilise and update the electronic production monitoring system (Blackbird). To be able to identify quality problems and carry out first line trouble shooting techniques. Handling material safely and accurately to/ from store locations and machine side. Ensure stock is accurately counted and booked when moved to and from locations using company systems. You will also be trained in the processing and optimisation of new tooling, to support the business growth and Engineering Project Department. To operate safely the forklift truck (*only when fully licenced) Additional responsibilities and requirements as and when necessary. Attend all training programmes required by the company. Requirements You must have at least three years experience as a qualified Injection Moulding Technician. You should have a high level of mechanical aptitude and problem-solving skills together with an innovative outlook. Working knowledge and experience of business systems such as Microsoft Dynamics. IMT Level 2 and IMT Level 3.Qualification. An appreciation of the Lean manufacturing fundamentals. Effective communication and decision-making skills. Strong attention to detail. Have a continuous improvement approach to work. Knowledge of tool trials and process optimisation. Benefits: Company pension On-site parking Generous holiday Bespoke training programme. TPBN1_UKTJ

We are currently recruiting for a Logistics Supervisor on the Night Shift at our site in Cradley Heath, Birmingham. Valid overhead crane licence FLT licence (Counterbalance, Combi, or Side-loader) Experience working night shifts in logistics or manufacturing * Knowledge of warehouse management s

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role We are looking for a Lift Service Engineer to join our Service team in Glasgow and surrounding areas. If you have a comprehensive Lift engineering background, including an NVQ 3 in Lift Engineering or equivalent we want to hear from you! Key Responsibilities Carrying out regular planned preventative maintenance and service visits Meeting agreed customer response times, building relationships with our clients Providing regular updates to the Service Supervisor/ Service Manager Problem solving and working on your own initiative What Were Looking For NVQ 3 in Lift Engineering Experience of working with Lifts Strong customer skills A clean UK Driving License Flexible Hours If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you. Why Join ORONA? We offer more than just a job we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary : Competitive pay that reflects your skills and experience Generous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future : Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind : Life Inssurance to support you and your loved ones Health & Wellbeing : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits : Enhanced leave for family-related events and emergencies Support When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care : Eyecare vouchers to help keep your vision sharp Recognition for Longevity : Long Service Awards to celebrate your milestones with us Referral Rewards : Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth : Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day. TPBN1_UKTJ

Maintenance Engineer Days (Monday to Friday) Circa £42,000 Okehampton, Devon Hands-on engineering role with real impact. We're working with a long-established, well-invested production site based near Okehampton who are looking to expand their maintenance team and add a skilled and proactive Maintenance Engineer to help deliver reliable plant performance and reduce downtime. This is a days-based role in a fast-paced production environment, ideally suited to someone with an electrical bias - though mechanical engineers with evidence of any electrical fault-finding skills are also encouraged to apply, as well as those leaving the forces. What you'll be doing: As part of the core engineering team, you'll support both reactive and planned maintenance across a range of production machinery and utilities. Key duties will include: Carrying out fault-finding, repairs, and component replacement on a wide range of electrical and mechanical systems. Supporting the site's preventative maintenance schedule to minimise unplanned breakdowns. Working safely and efficiently within electrical panels, including isolations, motor controls, sensors, relays, and PLCs. Supporting continuous improvement activities and looking for ways to reduce downtime. Working closely with the Supervisor and Engineering Manager to prioritise work and keep production running smoothly. What you'll need to succeed: A recognised qualification or apprenticeship in electrical or mechanical engineering. Solid experience in a maintenance role within a production or manufacturing setting. Comfortable with both reactive and preventative maintenance tasks. Electrical bias preferred but not essential Familiarity with CMMS systems and maintenance reporting. A team player with a proactive and hands-on approach to engineering challenges. What's in it for you? Salary up to £42,000 based on a 40-hour week. Overtime paid at 1.5x Days-based shift pattern (no nights). Great team culture with ongoing investment in training, tools, and equipment. Stable and well-established employer with clear progression routes. Ready to find out more? If you're a skilled maintenance engineer looking for a fresh challenge in a supportive team, apply now. For a confidential chat, contact Maintenance Engineering Recruiter Liam Reid today. Know someone else who might be a fit? Ask about our referral scheme. TPBN1_UKTJ

Job Description: V3 are recruiting for a Tool hanger to work within a manufacturing company based in Portsmouth. double days shifts 6am - 2pm and 2pm - 10pm rotating. £17.30 per hour Overall Purpose Of Job To prepare and load Injection Moulding tools for production Responsibilities: ? To safely prepare tools locate, load, connect - for handover to the Setters ? To assist production in any tooling/moulding machine related matters as necessary ? To collect and return tooling to storage areas and update our system to show correct location ? Keep tooling, presses and ancillary areas clean, tidy and organised in accordance with 5S methodology ? Operate Moulding machines as required ? Be flexible working between Cosham and Voyager Park to cover absence ? Able to enter accurately data onto our system for mouldings produced and scrapped ? Ensure the mouldings produced are to the quality standard required ? Adhere and follow the work instructions ? To learn Materials to be able to act as a stand in for, or assist, the Materials Handlers when required ? Any other reasonable task as specified by the Moulding Dept. Manager or Setting Supervisor Competencies ? Flexible, dynamic, motivated, and independent ? Effective time management skills working with tight timescales to meet production / manufacturing needs Experience ? Forklift, reach truck, WNA, counterbalance (desirable/advantageous) ? Overhead crane licence (requirement) ? PC literate MS Office/Javelin (preferred, but will be trained if necessary) ? Strong numeracy and literacy skills ? Previous experience in a production/manufacturing environment TPBN1_UKTJ

Position: Operations Supervisor Location: Evesham, Worcestershire Job Type: Permanent / Onsite My client, a highly specialist manufacturing and assembly business are looking for a Operations Supervisor to join the business. Role and Responsibilities – Operations Supervisor Reporting into the Operations Manager for the 1 of the 2 UK based sites, this role will have a depth of autonomy ranging from resource allocation and management, analysis of production data, improvement activities and projects as well as supporting the day-to-day running of a busy Operations team and the site. Other responsibilities include: Liaising with all areas of the business as needed to ensure key requirements are captured and communicated at Project or Production level Identify and action improvement opportunities within both the office and factory Work closely with the Quality and Engineering team to ensure best practice for production, support with any non-conformances identified and work on continuous improvement Directly manage the workshop ensuring roles and responsibilities are being followed Experience or Qualifications – Operations Supervisor Previous experience within an Engineering or Manufacturing business operating in a team leader role Ability to communicate at all levels of the business on a rang of projects Experience working and coaching apprentice level staff to help build their career (desirable) Good working knowledge of Microsoft Office system and IT literate Benefits – Operations Supervisor 24 Days + Bank Holidays (including Christmas Shutdown!) Private Health Care Options 5% pension employer contribution Multiple discount schemes on retail, gym etc… Candidates who currently are an Operations Supervisor, Production Supervisor, Operations Team Leader or Assembly Team Lead may be suitable for this position. For more information regarding this Operations Supervisor role please contact Ben Herd on 01453 829523 or Omega Resource Group is acting as an Employment Agency in relation to this vacancy. Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

Multi-Skilled Maintenance Engineer Job Title: Multi Skilled Maintenance Engineer Location: Magna Park, Milton Keynes Salary: £55,987 (Basic + Shift Allowance) Shift Pattern: 5 on (3 days, 2 nights) / 5 off 4 on (2 days, 2 nights) / 5 off 5 on (2 days, 3 nights) / 4 off Hours: 40 per week Job Role of the Multi-Skilled Maintenance Engineer A rare opportunity has become available for a Multi-Skilled Maintenance Engineer to join a highly automated, state-of-the-art distribution site. This modern facility offers exposure to cutting-edge automation and advanced engineering systems, making it an excellent opportunity for engineers looking to develop their technical skills in a fast-paced environment. You will be working as part of a large engineering team, reporting to the Lead Engineer and Shift Supervisor. The role is predominantly focused on planned preventative maintenance (approx. 98%), alongside reactive maintenance across a range of automated machinery. Site & Equipment This is a fully automated, clean working environment with a large-scale operation, including: Shuttle systems Conveyor systems Automated handling cranes (up to 40m high) Hanging garment systems No two days are the same, with a wide variety of machinery and technical challenges. Key Responsibilities Carry out planned preventative maintenance (PPM) Respond to and resolve breakdowns efficiently Fault finding on mechanical and electrical systems Ensure production targets are consistently achieved Maintain and repair automated machinery Follow and enforce safe working procedures Support continuous improvement initiatives Accurately document and report faults Collaborate with engineering and operational teams Common Fault Finding Areas Mechanical: Bearings, belts, rollers Gearboxes, motors Pneumatics & hydraulics Electrical: Sensors and motors Basic component recognition PLC knowledge (advantageous) Non-Negotiable Requirements Level 3 Engineering Qualification (Mechanical or Electrical) Experience within a manufacturing, distribution, or automated environment Desirable Requirements Multi-skilled capability (Mechanical or Electrical bias – approx. 80/20 split) PLC fault-finding experience Distribution or logistics background Ex-forces engineers encouraged to apply The Company The employer has been operating on-site for over 2 years, driving significant positive change and continuous improvement. They are looking for motivated engineers who want to develop their skills and grow within a progressive engineering environment. The site has a strong engineering structure, including: Site Manager Deputy Manager Shift Supervisors Lead Engineers Large team of 80+ engineers What's in It for You Full PPE, uniform, tools, and devices provided Subsidised meals & free hot drinks Break-out area for engineers Team building events & employee recognition schemes Life assurance Employee referral scheme (£1,000) 23 days holiday After probation: Private healthcare Company pension Employee assistance programme Cycle to work scheme Company sick pay TPBN1_UKTJ

Job Title: Injection Moulding Setter Location: Tamworth Salary: £44,000 - £46,000 Shift: On - 2 Days, 2 Nights Off - 5 Days On - 2 Days, 3 Nights Off - 4 Days On - 3 Days, 2 Nights Off - 5 Days Overview We are seeking an experienced Injection Moulding Setter to join a busy and forward-thinking manufacturing environment. Reporting to the Technical Manager, you will be responsible for setting and running moulding production orders, ensuring consistent high-quality output. You'll play a key role in achieving Right First Time and Just in Time manufacturing, working with advanced moulding techniques and standardised processes. Key Responsibilities Set and condition injection mould tools to meet production requirements Run production orders using pre-set programmes, monitoring output quality throughout the shift Respond to machine alarms and faults, implementing permanent corrective actions Carry out routine maintenance and fault finding on injection moulding machines and tooling Control and optimise processing parameters in line with product standards and cost requirements Maintain accurate records of maintenance, production, and quality checks Support supervision of shift staff when required in the absence of a Supervisor Prepare auxiliary equipment, jigs, fixtures, and assembly machines Perform quality checks in line with company standards and identify defects Carry out first-line troubleshooting of process and quality issues Ensure safe handling and accurate movement of materials and stock Support tooling trials, processing, and optimisation for new projects Participate in training and continuous improvement initiatives Skills & Experience Required Previous experience within and Injection Moulding environment Good knowledge of modern injection moulding machinery, robotics, tooling, finishing equipment, printing, assembling Minimum 3 years' experience as an Injection Moulding Technician Strong mechanical aptitude and fault-finding capability Strong mechanical aptitude and fault-finding capability Experience with injection moulding machines, tooling, and process optimisation For further details, please contact Nick Sollis – 01453 829767 or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

Engineering Team Leader Chester £67,000-£69,000 12 hour Days & nights A leading FMCG manufacturing company has a requirement for an Engineering Team Leader to join their friendly team. This role involves provision of engineering support, maintaining adequate cover, and ensuring all plant / machinery is kept in working order. You will be leading a proactive, experienced engineering team in the provision of both planned and reactive maintenance engineering activities. This role will suit a motivated engineering supervisor or senior engineer who is keen to lead a team in the upkeep of high speed automated machinery. Role Description Leading the team in the provision of Planned and reactive maintenance engineering activities across a range of manufacturing machinery. Planning of engineering work to be carried out. Providing skilled 'hands on' mechanical / electrical fault-finding support. Ensuring all engineering records are accurately completed and recorded. Ensure engineers are trained in Health & Safety practices. Contributing to engineering improvement ideas. Skills and Qualifications Engineering Team Leading experience. Qualified to Level 3+ in an engineering discipline (Mechanical or Electrical) Ability to lead and manage a team of maintenance engineers. Experience of working within an industrial manufacturing environment. * Strong communication skills. To find out more please click 'Apply' or contact Niall Carter on 01780 483 999 or at . Zest are food manufacturing recruitment specialists, who offer a more thorough and reliable recruitment service within the food and drink industry. Zest a thorough approach to recruitment. As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website TPBN1_UKTJ

Your new company A leading manufacturing organisation is seeking an Electrical & Instrumentation Technician to join their site maintenance team. This is an excellent opportunity to join a well-established business that offers a competitive salary, excellent benefits package and long-term career stability. Your new role Reporting to the E/I Supervisor, you will support the site's maintenance function by carrying out planned and reactive maintenance activities across electrical and instrumentation systems. Your responsibilities will include fault-finding and diagnosing plant breakdowns, maintaining and installing 415V AC motors and associated control equipment, and commissioning safety, control and measurement systems. You will also be responsible for the calibration and maintenance of instrumentation, including pressure, level and temperature measurement devices, as well as ensuring hazardous area equipment remains compliant with DSEAR regulations. In addition, you will undertake general electrical installation work, including lighting and cable management. What you'll need to succeed To be successful in this role, you will hold a time-served qualification in an Electrical or Instrumentation discipline and have previous experience within a manufacturing, process or industrial environment.You will possess strong fault-finding skills and a methodical approach to identifying root causes, alongside experience maintaining instrumentation and control systems. Experience with SAP, calibration software such as Beamex CMX, technical drawings and Microsoft Office would be advantageous. You will be a team player with a flexible approach and a strong commitment to health, safety and quality standards. What you'll get in return Salary of £44,200 plus additional hours' payment of £3,270Annual bonus scheme Defined contribution pension with up to 9% employer contribution Private BUPA medical insurance Life assurance (4x salary) Group income protection 25 days annual leave plus bank holidays Car and cycle-to-work salary sacrifice schemes On-site gym and canteen Free parking Monday to Friday working hours (08:00-16:00) What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Engineering Technician Join a world leader in the fragrance and flavour industry as a Engineering Technician This position would suit an experienced engineer as well as someone on a junior level eager to develop a career within a forward thinking company. Core Responsibilities Perform preventative maintenance and advanced troubleshooting and/or repairs of production and facility equipment, proactively identifying and resolving recurring maintenance issues in the assigned area of activity. Conduct electrical or mechanical installation, repair, and troubleshooting of motors, instrumentation and/or controls. Identify deviations and document/communicate them in compliance with Standard Operating Procedures. Monitor contractors on small maintenance projects. Work in accordance with all relevant requirements including, but not limited to ATEX, GMP, AIB, OSHA, HACCP, FDA, USDA and internal safety guidelines. Participate in lean activities. Maintains level of housekeeping/sanitation/food safety and safety which meets Company's standards and guidelines. Perform administrative duties including but not limited to creating and closing work requests using Maintenance management system (SAP). May assist the Maintenance Lead and/or Supervisor in delivering technical trainings for the staff and following up on work orders. May perform other tasks as assigned. Academic Background Vocational diploma in Technical engineering or related discipline (pre-university level). Certification required in forklift operation as well as in at least one of the following: pipefitting, welding, or pump, PLC, electrical, robotics or equipment repair. Professional Experience Overall work experience of 5 to 6 years in manufacturing or plant operations (experience in matrixed organization preferred). Up to 1 year of experience in people management desirable. Technical Skills Good knowledge of EHS rules and guidelines. Basic knowledge of SAP and Excel tools. Ability to safely use hand tools and equipment for installation, disassembly and testing of electronic, pneumatic and electrical devices. Good mechanical and/or electrical abilities within e.g. welding, plumbing, pipefitting or electrical areas. Ability to draw/sketch/redline standard machine and process drawings, write and provide simple and accurate instructions. This is a 6 months contract starting immediately ! Call to Action If you are passionate about engineering and eager to develop your career within a forward-thinking company, we want to hear from you! Apply today to become a vital part of our dynamic team and contribute to innovative projects that make a difference. Click the 'Apply Now' button and take the next step in your professional journey with us. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. TPBN1_UKTJ

CNC Gear Cutter | Poole | £16 per hour If you take pride in precision work and know your way around CNC machinery, this is a role worth looking at. A well-established engineering business in Poole is looking for an experienced CNC Gear Cutter who can hit the ground running and produce high-quality components consistently. As a CNC Gear Cutter, you will benefit from: Overtime available at x1.5 rate Annual salary review, appraisal process and recognition awards Early finish Fridays (07:30 to 13:00) and flexible start times 25 days holiday plus bank holidays and Christmas shutdown Pension contributions (4% employer, 4% employee) Death in service scheme Enhanced paternity pay Private medical insurance (after probation) Enhanced sickness benefits (after probation) As a CNC Gear Cutter, your responsibilities will include: Setting and operating CNC gear cutting machinery to produce components to drawing specification Reading and interpreting engineering drawings and tolerances accurately Carrying out first-off and in-process inspection to ensure quality standards are met Selecting appropriate tooling and making adjustments to maintain accuracy Completing relevant documentation and quality records Working to production schedules and flagging any issues to the supervisor As a CNC Gear Cutter, your experience will include: Proven experience as a CNC Gear Cutter, CNC Setter/Operator, or similar precision machining role Ability to set and operate CNC machinery with confidence and minimal supervision Strong understanding of engineering drawings and machining tolerances Experience working in a precision engineering or manufacturing environment A methodical approach and a high standard of workmanship If you're a skilled CNC Gear Cutter who takes pride in getting it right first time, apply today with an up-to-date CV or call Ella Deeley at Rubicon for more information

Ventilation Engineer (LEV P601) £45,000- £50,000 + Progress to Supervisor + Monday to Friday + Company Car + 1.5x Overtime + Hybrid Working Bridgwater, Somerset Are you a Ventilation Engineer or similar with a LEVP601 qualification, looking to join an industry leading manufacturer of LEV and filtration equipment and step up into senior management roles? On offer is the opportunity to work for an industry leader in the manufacturing and distribution of bespoke filtration products both in the UK and beyond. They also offer ongoing servicing and maintenance plans to ensure quality and reliability for their customers. Established for 50 years, they are looking to expand their service team due to an increase in their workload. In this role, you will be provided with the support needed to further develop your skillset and move into a supervisory/management position. During this transition you will be working a varied role split between being hands-on and from home. Day to day you will be following up on reports to survey remedials/defects highlighted and assisting with quotations. You will also be advising on testing reports as well as being on the tools commissioning, testing or servicing. This role would suit a Ventilation Engineer with their LEVP601, looking to take the next steps and progress their career with an industry leading company. The Role Receive guidance and training to progress Hybrid working / In the field Assist with reports and follow servicing and testing Support junior technicians The Person Ventilation Engineer Minimum LEVP601 Looking to step-up into management UK driving license Reference Number: BBBH24441f LEV, Local Exhaust Ventilation, Service, Fume Extraction, Maintenance, Testing, Commissioning, Ventilation, Duct, Airflow, HVAC, Air Conditioning, Bridgewater, Taunton, Somerset If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Astute's Power Team is partnering with a well-established biomass energy producer operating an integrated wood pellet manufacturing and biomass power generation facility to recruit a Multi-Skilled Maintenance Technician (with an electrical bias) for its Invergordon site. The Multi-Skilled Maintenance Technician role comes with a competitive salary, annual bonus, shift allowance, overtime opportunities and ongoing training and career development within a technically advanced process facility. If you're an electrically biased Maintenance Technician and are looking to work for an organisation that are at the forefront of sustainable biomass energy, then submit your CV to apply today. Responsibilities and duties of the Maintenance Technician role Reporting to the Maintenance Supervisor you will: Carry out planned preventative and reactive electrical and mechanical maintenance across a busy biomass and wood pellet production facility. Diagnose faults and repair plant equipment to minimise downtime and maximise operational performance. Inspect, maintain and troubleshoot motors, pumps, conveyors, gearboxes, bearings, hydraulic and pneumatic systems. Support production teams by responding quickly to breakdowns and ensuring equipment reliability. Assist with PLC fault finding, process improvements and continuous improvement initiatives. Complete maintenance inspections, testing and servicing in line with the site's planned maintenance programme. Ensure all maintenance activities are carried out safely and in compliance with health, safety and environmental procedures. Record maintenance activities accurately and contribute to root cause analysis and equipment reliability improvements. Work collaboratively with the wider maintenance, production and engineering teams to deliver safe and efficient plant operations. Professional qualifications We are looking for someone with the following: NVQ Level 3, City & Guilds or equivalent in Electrical Engineering. 18th Edition Wiring Regulations. Strong electrical and mechanical fault-finding and maintenance skills. Time-served Multi-Skilled Maintenance Engineer with an electrical bias. Personal skills The Maintenance Technician role would suit someone who is: PLC fault-finding experience is desirable. Knowledge of hydraulics, pneumatics, conveyors, pumps, motors and gearboxes is advantageous. Flexible and willing to work shifts and outdoors when required. Salary and benefits of the Maintenance Technician role Competitive salary (dependent on experience) Overtime opportunities at enhanced rates + shift allowance. Continental shift pattern. 33 days annual leave (including bank holidays) Company benefits to be discussed. Career progression opportunities within a leading renewable energy business Opportunity to work in a modern, continuous process manufacturing environment within the renewable energy sector. #LI-KM1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. TPBN1_UKTJ

Installation Supervisor Merseyside Initial 6-month contract | Likely to extend until mid-2027 Rate: PAYE Between £300 - £350 Plus holiday pay Want to lead a major automotive installation project where your experience genuinely makes the difference? If you're at your best when coordinating people, solving problems on-site and keeping complex engineering projects moving safely and efficiently, this could be the opportunity you've been waiting for. You'll join a high-profile automotive manufacturing programme supporting the delivery of a large-scale installation and commissioning project. With work expected to continue through to mid-2027, this is your chance to secure a long-term contract on a technically challenging project where your leadership will have a visible impact every day. What you'll be doing You'll work alongside the Site Manager, taking ownership of day-to-day site activities and leading a team of around 50 engineers, employees and subcontractors. Your role will include: Leading daily site operations to keep work progressing safely and efficiently. Coordinating installation and commissioning activities from site set-up through to customer acceptance. Managing subcontractors and ensuring everyone works towards the same project objectives. Monitoring progress, resolving issues quickly and keeping key milestones on track. Reviewing technical drawings and specifications so work is completed right first time. Promoting a strong health and safety culture across the project. Supporting workforce planning, resource allocation and productivity. Attending progress meetings and working closely with customers, suppliers and project stakeholders. Supporting commissioning, final snagging and successful project handover. Why this opportunity? This role offers far more than simply supervising a site. You'll have the opportunity to: Play a key leadership role on a flagship automotive manufacturing project. Lead large multidisciplinary teams within a highly automated production environment. Work on complex installation and commissioning activities using modern manufacturing technologies. Build experience on a long-duration programme expected to run until mid-2027, providing greater contract stability than many project-based roles. Work alongside experienced engineering and project delivery professionals on technically demanding automation systems. What you'll bring You'll already have experience leading large engineering teams and understand what it takes to deliver projects safely, efficiently and to a high standard. You'll ideally have experience in: Automotive manufacturing or industrial automation. Site supervision on large installation or commissioning projects. Managing subcontractors and multidisciplinary teams. Reading and interpreting technical drawings and documentation. Planning work, solving problems and keeping projects moving under demanding timescales. Experience with any of the following would also be beneficial: Industrial automation and robotics Siemens, Lenze or SEW motion control systems HMI and vision systems Manufacturing commissioning Spot welding, GMAW, Laser, Hemming, Sealing and SPR technologies Reliability analysis Project planning and reporting About you You'll succeed if you're someone who: Leads confidently while earning the respect of your team. Enjoys solving problems and making decisions on-site. Communicates clearly with engineers, subcontractors and customers. Maintains high standards for safety, quality and delivery. Stays organised and calm when project demands increase. Interested? Whether you're actively looking for your next contract or simply open to hearing about a project with genuine long-term potential, we'd love to speak with you. Contact Paul Wilkinson on for a confidential conversation or send across your CV when you're ready. Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

QC Supervisor , the QC Senior Analyst will be responsible for managing laboratory activities, overseeing analytical testing, maintaining compliance with industry standards, and ensuring all work is completed in line with company procedures and regulatory requirements. Manufacturing Non-Negotiable Re

Job Title: Welder Location: Staplehurst, Kent Salary: £36,000 - £39,000 p.a. (dependent on experience) + discretionary monthly bonus Job Type: Full time, Permanent Working Hours: Monday to Friday, 40 hours per week between 7.30am and 4.00pm Company Overview: The Company has a new vacancy for a Welder to assist in the busy manufacturing and fabrication workshop reporting direct to the Engineering Supervisor. The Company is a family run group of companies covering manufacturing, sales and aftercare servicing in the veterinary sector. Starting from 1981 we have quickly grown to be one of the leading veterinary equipment suppliers in the UK. Over the years The Company have acquired a variety of companies to increase the equipment offering and skill sets. Approximately 50% of the products are still manufactured at the company's HQ in Marden which boasts an extensive range of capabilities including; CAD, CNC machining, laser cutting, metal fabrication, plastic fabrication, wood shop, paint shop, full assembly & testing. Although still focused on the veterinary sector, the company have diversified into allied areas such as vehicle conversions for canine transportation and animal ambulances to grooming equipment and aquatic systems. Responsibilities & Duties: Work from drawings Observe and follow company safety rules and regulations Produce steel products, constructed from box section and sheets of varying thickness from 1mm to 5mm and cleaned to a high standard From time to time you may be required to use the following machinery: Guillotine Pillar Drills Band saw Press brake Training will be provided where necessary. Qualifications & Skills: Must have experience in MIG and TIG Welding Good attention to detail Self-motivation Good communication Good timekeeping Benefits: Full-time permanent contract, 40 hours per week, Monday to Friday Discretionary monthly bonus Idyllic countryside setting Excellent opportunities to train and progress 33 holiday days per year (inc. bank holidays) Contributory pension scheme On-site car parking Staff events, such as the Big Summer Party and awards Scheme Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of: Welder Fabricator, Metalworker, Sheet Metal Worker, Metal Worker, Metal Fabricator, Skilled Welder, Skilled Fabricator, Welding Technician, Welding Engineer, Finishing Welder, Fabrication, MIG Welder, TIG Welder, Manufacturing Welder, Manufacturing Fabricator may also be considered for this role. TPBN1_UKTJ

New opportunity to join a growing food manufacturer as a Production Team Leader, working four days a week. We are looking for someone with experience as a Team Leader, Line Leader, Production Supervisor, or similar ideally in food manufacturing. Looking for strong people - leadership skills with the

Electrical Maintenance Supervisor North Bristol | Permanent | £45,000 DOE | Monday-Friday | 8:00am-4:00pm My client is a global leader in the manufacture of specialist inks, coatings and colour technologies, supporting customers across the packaging, printing and manufacturing industries. With over 30 years of success and multiple UK sites, they are recognised for their focus on innovation, sustainability and investing in their people. Due to continued growth, they are now looking for an Electrical Maintenance Supervisor to join their established engineering team in North Bristol. The Role This is a hands-on supervisory position, supporting a team of Electrical Maintenance Engineers while ensuring the safe and efficient operation of site equipment. Responsibilities: Supervise and support a small team of Electrical Maintenance Engineers. Allocate daily tasks and maintenance activities. Carry out planned and reactive electrical maintenance across production machinery. Fault-find and maintain equipment including mixers, pumps, compressors and process machinery. Support engineer training, development and continuous improvement activities. Read and interpret electrical drawings and technical documentation. Ensure maintenance activities are completed safely and effectively. Requirements: Experience within an electrical maintenance environment. Previous supervisory/team leader experience. City & Guilds, NVQ or equivalent engineering qualification. Strong electrical fault-finding skills. Ability to interpret engineering drawings. Good IT skills, including Microsoft Office. Package: £45,000 DOE Monday-Friday, 8:00am-4:00pm Annual bonus/incentive scheme Company pension Generous annual leave + bank holidays Life assurance Employee Assistance Programme Technical and leadership training Career progression within a global organisation Employee discounts, wellbeing support, cycle-to-work scheme and on-site parking For more information please contact Martin Pavlov on 07908 947471. TPBN1_UKTJ

Production Foreman Location: Barnsley Salary: £40,000 - £50,000 DOE Hours: Monday to Thursday | 40 Hours Per Week | Days Flexible Between (07:00 - 19:00) The Company A well-established and growing heavy manufacturing business is looking to recruit an experienced Production Foreman to lead production operations at its Barnsley facility. This is an excellent opportunity for a hands-on leader with a background in metal manufacturing who enjoys driving performance, developing teams and maintaining high standards of safety and quality. The Role As Production Foreman, you will be responsible for supervising daily production activities, ensuring targets are achieved safely, efficiently and to the highest quality standards. You will lead and motivate production teams, coordinate workflow, support continuous improvement initiatives and work closely with maintenance and other departments to maximise plant performance. Key Responsibilities Lead and supervise day-to-day production operations Ensure production schedules are achieved safely and efficiently Manage, coach and develop production operators and team leaders Conduct daily toolbox talks and shift handovers Monitor production performance and drive KPI improvements Coordinate with the maintenance team to minimise downtime Ensure compliance with all health, safety and environmental procedures Maintain high housekeeping and quality standards across the production area Investigate incidents, near misses and implement corrective actions Complete production reports and maintain accurate operational records Support continuous improvement projects to increase productivity and reduce waste About You The successful candidate will have: Previous experience within a metal manufacturing, foundry, steel, casting or heavy engineering environment At least 3 years' experience in a supervisory or team leadership role within manufacturing Strong leadership and people management skills A proactive approach to health, safety and environmental compliance Experience monitoring production KPIs and driving operational improvements Excellent communication and problem-solving skills Good organisational and planning ability Competent IT skills, including Microsoft Excel The ability to read technical drawings would be advantageous Experience with metalworking equipment such as presses, mills, saws, routers or welding machinery would be beneficial but is not essential What's on Offer Salary of £40,000-£50,000 depending on experience Permanent days position with an early Friday finish Stable, well-established manufacturing business Opportunity to lead an experienced production team Ongoing training and development A varied and rewarding leadership role with opportunities to make a real impact If you're an experienced Production Supervisor or Foreman looking for your next challenge within heavy manufacturing, we'd like to hear from you. Apply today with your CV for immediate consideration. TPBN1_UKTJ